[ 0.975775] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window] [ 0.975776] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.975777] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.975853] NET: Registered protocol family 2 [ 0.975992] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.976034] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.976285] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.976531] TCP: Hash tables configured (established 131072 bind 65536) [ 0.976579] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.976649] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.976800] NET: Registered protocol family 1 [ 0.976805] NET: Registered protocol family 44 [ 1.741784] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x643 took 747013 usecs [ 1.769776] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x643 took 27079 usecs [ 1.797774] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x643 took 27079 usecs [ 1.825773] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x643 took 27299 usecs [ 1.826043] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.826051] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 1.826205] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 1.826208] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 1.826251] PCI: CLS 64 bytes, default 64 [ 1.826295] Trying to unpack rootfs image as initramfs... [ 1.989649] random: fast init done [ 2.326629] Freeing initrd memory: 34312K [ 2.327181] PCI-DMA: Disabling AGP. [ 2.327274] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 2.327275] PCI-DMA: using GART IOMMU. [ 2.327277] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.329903] LVT offset 1 assigned for vector 0x400 [ 2.329913] LVT offset 1 assigned [ 2.330054] perf: AMD IBS detected (0x0000001f) [ 2.330459] Initialise system trusted keyrings [ 2.330468] Key type blacklist registered [ 2.330547] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 2.331906] zbud: loaded [ 2.332085] Platform Keyring initialized [ 2.332087] Key type asymmetric registered [ 2.332088] Asymmetric key parser 'x509' registered [ 2.332095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.332164] io scheduler mq-deadline registered [ 2.332884] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.332906] ACPI: ACPI: processor limited to max C-state 1 [ 2.333437] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.353959] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.354552] Linux agpgart interface v0.103 [ 2.354580] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 2.354580] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 2.354886] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.354886] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.355092] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.355167] mousedev: PS/2 mouse device common for all mice [ 2.355202] rtc_cmos 00:01: RTC can wake from S4 [ 2.355346] rtc_cmos 00:01: registered as rtc0 [ 2.355359] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.355424] ledtrig-cpu: registered to indicate activity on CPUs [ 2.355668] drop_monitor: Initializing network drop monitor service [ 2.355825] NET: Registered protocol family 10 [ 2.365765] Segment Routing with IPv6 [ 2.365784] mip6: Mobile IPv6 [ 2.365786] NET: Registered protocol family 17 [ 2.365832] mpls_gso: MPLS GSO support [ 2.366075] microcode: CPU0: patch_level=0x010000b6 [ 2.366081] microcode: CPU1: patch_level=0x010000b6 [ 2.366084] microcode: CPU2: patch_level=0x010000b6 [ 2.366090] microcode: CPU3: patch_level=0x010000b6 [ 2.366093] microcode: Microcode Update Driver: v2.2. [ 2.366095] IPI shorthand broadcast: enabled [ 2.366102] sched_clock: Marking stable (2360953488, 5070075)->(2548110059, -182086496) [ 2.366170] registered taskstats version 1 [ 2.366172] Loading compiled-in X.509 certificates [ 2.372230] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.408569] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 2.408585] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 2.408611] zswap: loaded using pool lzo/zbud [ 2.408683] Key type ._fscrypt registered [ 2.408684] Key type .fscrypt registered [ 2.408694] AppArmor: AppArmor sha1 policy hashing enabled [ 2.409040] rtc_cmos 00:01: setting system clock to 2022-09-12T07:52:32 UTC (1662969152) [ 2.410171] Freeing unused kernel image (initmem) memory: 1664K [ 2.428850] Write protecting the kernel read-only data: 16384k [ 2.429487] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 2.429552] Freeing unused kernel image (rodata/data gap) memory: 112K [ 2.438208] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.438209] Run /init as init process [ 2.506405] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20191018/utaddress-213) [ 2.506412] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.513922] SCSI subsystem initialized [ 2.527444] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.535126] ACPI: bus type USB registered [ 2.535146] usbcore: registered new interface driver usbfs [ 2.535154] usbcore: registered new interface driver hub [ 2.535187] usbcore: registered new device driver usb [ 2.536961] libata version 3.00 loaded. [ 2.538393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.539028] ehci-pci: EHCI PCI platform driver [ 2.541474] scsi host0: pata_atiixp [ 2.541614] scsi host1: pata_atiixp [ 2.541651] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.541652] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.541796] QUIRK: Enable AMD PLL fix [ 2.541822] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.541828] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.541832] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.541840] ehci-pci 0000:00:12.2: debug port 1 [ 2.541881] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe5ff800 [ 2.543177] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.548778] ahci 0000:00:11.0: version 3.0 [ 2.549038] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.549040] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.549524] scsi host2: ahci [ 2.549735] scsi host3: ahci [ 2.549949] scsi host4: ahci [ 2.553734] scsi host5: ahci [ 2.553818] ata3: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd00 irq 29 [ 2.553820] ata4: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffd80 irq 29 [ 2.553822] ata5: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe00 irq 29 [ 2.553823] ata6: SATA max UDMA/133 abar m1024@0xfe5ffc00 port 0xfe5ffe80 irq 29 [ 2.554027] ahci 0000:03:00.0: JMB361 has only one port [ 2.554034] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1 [ 2.554874] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 2.555650] scsi host6: pata_jmicron [ 2.556312] scsi host7: pata_jmicron [ 2.556353] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19 [ 2.556354] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 [ 2.556937] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.557025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 [ 2.557026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.557027] usb usb1: Product: EHCI Host Controller [ 2.557028] usb usb1: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 ehci_hcd [ 2.557029] usb usb1: SerialNumber: ... [ 2.557315] hub 1-0:1.0: USB hub found [ 2.557322] hub 1-0:1.0: 5 ports detected [ 2.557906] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.557913] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.557917] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.557925] ehci-pci 0000:00:13.2: debug port 1 [ 2.557958] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe5ff400 [ 2.558310] libphy: r8169: probed [ 2.558876] r8169 0000:05:00.0 eth0: RTL8168e/8111e, XX:XX:XX:XX:XX:XX, XID 2c1, IRQ 28 [ 2.558877] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.564139] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 2.564142] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.564523] scsi host8: ahci [ 2.564629] scsi host9: ahci [ 2.564685] ata9: SATA max UDMA/133 abar m8192@0xfe8fe000 port 0xfe8fe100 irq 18 [ 2.564686] ata10: DUMMY [ 2.572814] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.572867] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 [ 2.572868] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.572870] usb usb2: Product: EHCI Host Controller [ 2.572870] usb usb2: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 ehci_hcd [ 2.572871] usb usb2: SerialNumber: ... [ 2.572983] hub 2-0:1.0: USB hub found [ 2.572989] hub 2-0:1.0: 5 ports detected [ 2.573165] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.573170] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 2.681872] firewire_ohci 0000:04:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.681910] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 2.682087] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 [ 2.682088] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.682089] usb usb3: Product: xHCI Host Controller [ 2.682090] usb usb3: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 xhci-hcd [ 2.682090] usb usb3: SerialNumber: ... [ 2.682429] hub 3-0:1.0: USB hub found [ 2.682436] hub 3-0:1.0: 2 ports detected [ 2.682518] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.682522] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 4 [ 2.682525] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.682533] ehci-pci 0000:00:16.2: debug port 1 [ 2.682561] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe5ff000 [ 2.682594] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2.682596] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5 [ 2.682599] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 2.685130] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.685146] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05 [ 2.685147] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.685148] usb usb5: Product: xHCI Host Controller [ 2.685149] usb usb5: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 xhci-hcd [ 2.685149] usb usb5: SerialNumber: ... [ 2.685229] hub 5-0:1.0: USB hub found [ 2.685235] hub 5-0:1.0: 2 ports detected [ 2.696813] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.696857] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 [ 2.696858] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.696859] usb usb4: Product: EHCI Host Controller [ 2.696859] usb usb4: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 ehci_hcd [ 2.696860] usb usb4: SerialNumber: ... [ 2.696982] hub 4-0:1.0: USB hub found [ 2.696988] hub 4-0:1.0: 4 ports detected [ 2.697918] ohci-pci: OHCI PCI platform driver [ 2.698281] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.698286] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 2.698304] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe5fe000 [ 2.714875] ata1.00: ATA-8: ST3500418AS, CC46, max UDMA/133 [ 2.714877] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.714882] ata1.01: ATA-8: ST3500418AS, HP34, max UDMA/100 [ 2.714883] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.714885] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.714886] ata1.01: limited to UDMA/33 due to 40-wire cable [ 2.715604] ata7.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 2.00, max UDMA/66 [ 2.724886] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5 [ 2.725120] scsi 0:0:1:0: Direct-Access ATA ST3500418AS HP34 PQ: 0 ANSI: 5 [ 2.728073] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.728152] sd 0:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.728162] sd 0:0:0:0: [sda] Write Protect is off [ 2.728164] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.728185] sd 0:0:1:0: [sdb] Write Protect is off [ 2.728186] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.728215] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.728232] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.760871] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05 [ 2.760873] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.760874] usb usb6: Product: OHCI PCI host controller [ 2.760874] usb usb6: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 ohci_hcd [ 2.760875] usb usb6: SerialNumber: ... [ 2.760973] hub 6-0:1.0: USB hub found [ 2.760981] hub 6-0:1.0: 5 ports detected [ 2.761282] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.761287] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 2.761304] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe5fd000 [ 2.820675] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.824837] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05 [ 2.824838] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.824839] usb usb7: Product: OHCI PCI host controller [ 2.824840] usb usb7: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 ohci_hcd [ 2.824841] usb usb7: SerialNumber: ... [ 2.824932] hub 7-0:1.0: USB hub found [ 2.824975] hub 7-0:1.0: 5 ports detected [ 2.825224] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.825230] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 2.825247] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe5fc000 [ 2.831062] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 > [ 2.831230] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.831578] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.871973] ata6: SATA link down (SStatus 0 SControl 300) [ 2.888825] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05 [ 2.888826] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.888827] usb usb8: Product: OHCI PCI host controller [ 2.888828] usb usb8: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 ohci_hcd [ 2.888829] usb usb8: SerialNumber: ... [ 2.888929] hub 8-0:1.0: USB hub found [ 2.888936] hub 8-0:1.0: 2 ports detected [ 2.889147] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.889152] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 2.889169] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe5f7000 [ 2.916827] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.948218] usb 1-1: New USB device found, idVendor=0bc2, idProduct=ab44, bcdDevice=48.85 [ 2.948219] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.948220] usb 1-1: Product: Backup+ Hub [ 2.948221] usb 1-1: Manufacturer: Seagate [ 2.948222] usb 1-1: SerialNumber: ... [ 2.948493] hub 1-1:1.0: USB hub found [ 2.952811] hub 1-1:1.0: 3 ports detected [ 2.952834] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.05 [ 2.952835] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.952836] usb usb9: Product: OHCI PCI host controller [ 2.952837] usb usb9: Manufacturer: Linux 5.5.0-0.bpo.2-amd64 ohci_hcd [ 2.952838] usb usb9: SerialNumber: ... [ 2.952936] hub 9-0:1.0: USB hub found [ 2.952943] hub 9-0:1.0: 4 ports detected [ 3.025019] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 3.028814] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.028837] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.028859] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.030789] ata4.00: supports DRM functions and may not be fully accessible [ 3.031814] ata4.00: ATA-11: Samsung SSD 860 PRO 1TB, RVM01B6Q, max UDMA/133 [ 3.031816] ata4.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 3.034398] ata4.00: supports DRM functions and may not be fully accessible [ 3.037403] ata4.00: configured for UDMA/133 [ 3.040820] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.043675] ata5.00: ATA-8: KINGSTON SV300S37A240G, 520ABBF0, max UDMA/133 [ 3.043676] ata5.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.043776] ata3.00: ATA-8: KINGSTON SV300S37A240G, 520ABBF0, max UDMA/133 [ 3.043778] ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.050379] usb 5-1: New USB device found, idVendor=0bc2, idProduct=ab45, bcdDevice=48.85 [ 3.050381] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.050382] usb 5-1: Product: Backup+ Hub [ 3.050383] usb 5-1: Manufacturer: Seagate [ 3.050383] usb 5-1: SerialNumber: ... [ 3.051881] hub 5-1:1.0: USB hub found [ 3.052084] ata9.00: ATA-8: WDC WD5000AAKS-00D2B0, 12.01C02, max UDMA/133 [ 3.052086] ata9.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 3.052383] hub 5-1:1.0: 3 ports detected [ 3.053104] ata9.00: configured for UDMA/133 [ 3.056951] ata3.00: configured for UDMA/133 [ 3.057078] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 3.057330] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.057338] sd 2:0:0:0: [sdc] Write Protect is off [ 3.057339] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.057351] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.057411] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 3.057420] ata5.00: configured for UDMA/133 [ 3.057643] scsi 4:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 3.057902] ata4.00: Enabling discard_zeroes_data [ 3.057945] sd 3:0:0:0: [sdd] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 3.057954] sd 3:0:0:0: [sdd] Write Protect is off [ 3.057955] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.057958] sd 4:0:0:0: [sde] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.057967] sd 4:0:0:0: [sde] Write Protect is off [ 3.057968] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.057969] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.057983] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.059411] scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 2.00 PQ: 0 ANSI: 5 [ 3.077189] ata4.00: Enabling discard_zeroes_data [ 3.077247] sdc: sdc1 [ 3.077305] sde: sde1 [ 3.077586] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.078091] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 sdd7 > [ 3.078123] sd 4:0:0:0: [sde] Attached SCSI disk [ 3.078483] ata4.00: Enabling discard_zeroes_data [ 3.079614] sd 3:0:0:0: [sdd] supports TCG Opal [ 3.079615] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.080781] usb 1-5: new high-speed USB device number 3 using ehci-pci [ 3.126488] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.126491] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.141068] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 3.188832] firewire_core 0000:04:07.0: created device fw0: GUID 001e8c0000dc506e, S400 [ 3.220797] usb 7-1: new low-speed USB device number 2 using ohci-pci [ 3.264037] scsi 8:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1C02 PQ: 0 ANSI: 5 [ 3.264298] sd 8:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.264313] sd 8:0:0:0: [sdf] Write Protect is off [ 3.264315] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 3.264338] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.282833] usb 1-5: New USB device found, idVendor=07ca, idProduct=313a, bcdDevice= 0.05 [ 3.282835] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.282836] usb 1-5: Product: Live Streamer CAM 313 [ 3.282837] usb 1-5: Manufacturer: Sunplus IT Co [ 3.282838] usb 1-5: SerialNumber: ... [ 3.332791] ata9.00: exception Emask 0x10 SAct 0x800000 SErr 0x780100 action 0x6 [ 3.332846] ata9.00: irq_stat 0x08000000 [ 3.332897] ata9: SError: { UnrecovData 10B8B Dispar BadCRC Handshk } [ 3.332939] ata9.00: failed command: READ FPDMA QUEUED [ 3.332983] ata9.00: cmd 60/08:b8:80:7c:fc/00:00:06:00:00/40 tag 23 ncq dma 4096 in res 40/00:bc:80:7c:fc/00:00:06:00:00/40 Emask 0x10 (ATA bus error) [ 3.333027] ata9.00: status: { DRDY } [ 3.333082] ata9: hard resetting link [ 3.348793] tsc: Refined TSC clocksource calibration: 3210.731 MHz [ 3.348803] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e47e32cec2, max_idle_ns: 440795248237 ns [ 3.348820] clocksource: Switched to clocksource tsc [ 3.353279] usb 5-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 3.379360] usb 5-1.1: New USB device found, idVendor=0bc2, idProduct=ab38, bcdDevice= 1.00 [ 3.379361] usb 5-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 3.379362] usb 5-1.1: Product: Backup+ Hub BK [ 3.379363] usb 5-1.1: Manufacturer: Seagate [ 3.379364] usb 5-1.1: SerialNumber: ... [ 3.385404] usbcore: registered new interface driver usb-storage [ 3.390153] scsi host10: uas [ 3.390254] usbcore: registered new interface driver uas [ 3.390633] scsi 10:0:0:0: Direct-Access Seagate Backup+ Hub BK D781 PQ: 0 ANSI: 6 [ 3.391570] sd 10:0:0:0: [sdg] 15628053167 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 3.440809] usb 7-1: New USB device found, idVendor=046d, idProduct=c404, bcdDevice= 2.20 [ 3.440811] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.440812] usb 7-1: Product: Trackball [ 3.440813] usb 7-1: Manufacturer: Logitech [ 3.442641] sd 10:0:0:0: [sdg] Write Protect is off [ 3.442648] sd 10:0:0:0: [sdg] Mode Sense: 4f 00 00 00 [ 3.442806] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.443125] sd 10:0:0:0: [sdg] Optimal transfer size 33553920 bytes [ 3.448074] hid: raw HID events driver (C) Jiri Kosina [ 3.456998] usbcore: registered new interface driver usbhid [ 3.456999] usbhid: USB HID core driver [ 3.458585] input: Logitech Trackball as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/0003:046D:C404.0001/input/input1 [ 3.458646] hid-generic 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:13.0-1/input0 [ 3.593185] sdg: sdg1 sdg2 sdg3 sdg4 sdg5 sdg6 sdg7 [ 3.594319] sd 10:0:0:0: [sdg] Attached SCSI disk [ 3.808784] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.810983] ata9.00: configured for UDMA/133 [ 3.810993] ata9: EH complete [ 3.876782] ata9.00: exception Emask 0x10 SAct 0x8000000 SErr 0x780100 action 0x6 [ 3.876827] ata9.00: irq_stat 0x08000000 [ 3.876869] ata9: SError: { UnrecovData 10B8B Dispar BadCRC Handshk } [ 3.876911] ata9.00: failed command: READ FPDMA QUEUED [ 3.876955] ata9.00: cmd 60/08:d8:00:f9:f8/00:00:0d:00:00/40 tag 27 ncq dma 4096 in res 40/00:dc:00:f9:f8/00:00:0d:00:00/40 Emask 0x10 (ATA bus error) [ 3.876998] ata9.00: status: { DRDY } [ 3.877040] ata9: hard resetting link [ 4.127260] random: crng init done [ 4.352823] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.354736] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 4.354738] ata9.00: revalidation failed (errno=-5) [ 9.396831] ata9: hard resetting link [ 9.872816] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.875659] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 9.875660] ata9.00: revalidation failed (errno=-5) [ 9.875704] ata9: limiting SATA link speed to 1.5 Gbps [ 9.875705] ata9.00: limiting speed to UDMA/133:PIO3 [ 15.028806] ata9: hard resetting link [ 15.504842] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 15.507817] ata9.00: configured for UDMA/133 [ 15.507826] ata9: EH complete [ 15.590928] sdf: sdf1 sdf2 sdf3 sdf4 < sdf5 sdf6 sdf7 sdf8 sdf9 sdf10 sdf11 sdf12 sdf13 sdf14 sdf15 > [ 15.591782] sd 8:0:0:0: [sdf] Attached SCSI disk [ 18.883750] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 18.952533] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 19.025088] EXT4-fs (sdc1): INFO: recovery required on readonly filesystem [ 19.025089] EXT4-fs (sdc1): write access will be enabled during recovery [ 20.015301] EXT4-fs (sdc1): recovery complete [ 20.018657] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 22.473726] systemd[1]: Failed to look up module alias 'autofs4': Function not implemented [ 22.505256] cgroup2: Unknown parameter 'memory_recursiveprot' [ 22.552363] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 22.552451] systemd[1]: Detected architecture x86-64. [ 22.586548] systemd[1]: Set hostname to ... [ 25.957625] systemd[1]: /lib/systemd/system/monopd.service:8: Special user nobody configured, this is not safe! [ 26.379013] systemd[1]: usr.mount: Unit is bound to inactive unit dev-sdc1.device. Stopping, too. [ 26.380352] systemd[1]: Queued start job for default target Graphical Interface. [ 26.429332] systemd[1]: Created slice Virtual Machine and Container Slice. [ 26.429848] systemd[1]: Created slice system-getty.slice. [ 26.430177] systemd[1]: Created slice system-modprobe.slice. [ 26.430454] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 26.430686] systemd[1]: Created slice User and Session Slice. [ 26.430751] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 26.430790] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 26.430857] systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported. [ 26.431239] systemd[1]: Reached target Local Encrypted Volumes. [ 26.431311] systemd[1]: Reached target Slices. [ 26.431335] systemd[1]: Reached target TLS tunnels for network services - per-config-file target. [ 26.431350] systemd[1]: Reached target Swap. [ 26.431372] systemd[1]: Reached target Libvirt guests shutdown. [ 26.431447] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 26.441374] systemd[1]: Listening on LVM2 poll daemon socket. [ 26.444635] systemd[1]: Listening on RPCbind Server Activation Socket. [ 26.448323] systemd[1]: Listening on Syslog Socket. [ 26.448420] systemd[1]: Listening on fsck to fsckd communication Socket. [ 26.448478] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 26.448616] systemd[1]: Listening on Journal Audit Socket. [ 26.448682] systemd[1]: Listening on Journal Socket (/dev/log). [ 26.448777] systemd[1]: Listening on Journal Socket. [ 26.455526] systemd[1]: Listening on udev Control Socket. [ 26.455608] systemd[1]: Listening on udev Kernel Socket. [ 26.456322] systemd[1]: Mounting Huge Pages File System... [ 26.457106] systemd[1]: Mounting POSIX Message Queue File System... [ 26.457895] systemd[1]: Mounting NFSD configuration filesystem... [ 26.458670] systemd[1]: Mounting RPC Pipe File System... [ 26.459534] systemd[1]: Mounting Kernel Debug File System... [ 26.460313] systemd[1]: Mounting Kernel Trace File System... [ 26.460517] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 26.460664] systemd[1]: Finished Availability of block devices. [ 26.461726] systemd[1]: Starting Set the console keyboard layout... [ 26.461772] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 26.462653] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 26.463443] systemd[1]: Starting Load Kernel Module configfs... [ 26.464214] systemd[1]: Starting Load Kernel Module drm... [ 26.464978] systemd[1]: Starting Load Kernel Module fuse... [ 26.465869] systemd[1]: Starting nftables... [ 26.466743] systemd[1]: Started Nameserver information manager. [ 26.513775] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 26.513840] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 26.534228] systemd[1]: Starting Journal Service... [ 26.597621] systemd[1]: Starting Load Kernel Modules... [ 26.598413] systemd[1]: Starting Remount Root and Kernel File Systems... [ 26.599181] systemd[1]: Starting Coldplug All udev Devices... [ 26.949458] systemd[1]: XXX@XXX: Succeeded. [ 26.949620] systemd[1]: Finished Load Kernel Module configfs. [ 26.949893] systemd[1]: XXX@XXX: Succeeded. [ 26.950036] systemd[1]: Finished Load Kernel Module fuse. [ 26.950237] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 26.950291] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. [ 26.952550] systemd[1]: nftables.service: Main process exited, code=exited, status=3/NOTIMPLEMENTED [ 26.952639] systemd[1]: nftables.service: Failed with result 'exit-code'. [ 26.952832] systemd[1]: Failed to start nftables. [ 26.953275] systemd[1]: Reached target Network (Pre). [ 26.958471] systemd[1]: XXX@XXX: Succeeded. [ 26.958616] systemd[1]: Finished Load Kernel Module drm. [ 27.294626] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 27.376453] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 27.376551] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 27.376729] systemd[1]: Failed to start Load Kernel Modules. [ 27.405523] systemd[1]: Starting Apply Kernel Variables... [ 27.624151] systemd[1]: Finished Apply Kernel Variables. [ 27.741500] systemd[1]: Started Journal Service. [ 28.451878] EXT4-fs (sdc1): re-mounted. Opts: (null) [ 28.509271] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 28.509281] ext3 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 39.317809] EXT4-fs (sde1): 7 orphan inodes deleted [ 39.317812] EXT4-fs (sde1): recovery complete [ 39.328157] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [ 41.699268] EXT4-fs (sdb6): mounting ext3 file system using the ext4 subsystem [ 42.516173] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 43.304381] systemd-journald[293]: Received client request to flush runtime journal. [ 43.781364] systemd-journald[293]: File /var/log/journal/d3c1ab25154743b3680dcea04cfa0184/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 134.186917] EXT4-fs (sdb9): mounting ext3 file system using the ext4 subsystem [ 134.544678] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 139.075821] proc: Bad value for 'hidepid' [ 167.371440] r8169 0000:05:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-1.fw [ 167.371757] RTL8211DN Gigabit Ethernet r8169-500:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-500:00, irq=IGNORE) [ 167.684848] r8169 0000:05:00.0 eth0: Link is Down [ 170.463275] r8169 0000:05:00.0 eth0: Link is Up - 1Gbps/Full - flow control off [ 170.463284] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 177.066903] proc: Bad value for 'hidepid' [ 177.366540] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead. [ 177.764419] acpi_cpufreq: overriding BIOS provided _PSD data [ 178.974805] input: Mouseemu virtual keyboard as /devices/virtual/input/input2 [ 178.974984] input: Mouseemu virtual mouse as /devices/virtual/input/input3 [ 393.809345] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [10200.116866] lp: driver loaded but no devices found [10200.125714] ppdev: user-space parallel port driver [10200.550892] [drm] radeon kernel modesetting enabled. [10200.551170] radeon 0000:01:00.0: vgaarb: deactivate vga console [10200.552999] Console: switching to colour dummy device 80x25 [10200.553667] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x1043:0x0443 0x00). [10200.553767] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [10200.553778] caller pci_map_rom+0x6a/0x17d mapping multiple BARs [10200.555608] ATOM BIOS: XXX.XXX.XXX.XXX.41.AS01 [10200.555793] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [10200.555803] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [10200.555812] [drm] Detected VRAM RAM=2048M, BAR=256M [10200.555815] [drm] RAM width 128bits DDR [10200.558000] [TTM] Zone kernel: Available graphics memory: 8200412 KiB [10200.558004] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [10200.558006] [TTM] Initializing pool allocator [10200.558018] [TTM] Initializing DMA pool allocator [10200.558057] [drm] radeon: 2048M of VRAM memory ready [10200.558060] [drm] radeon: 1024M of GTT memory ready. [10200.558161] [drm] Loading TURKS Microcode [10200.568607] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TURKS_pfp.bin [10200.569135] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TURKS_me.bin [10200.582794] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/BTC_rlc.bin [10200.583299] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TURKS_mc.bin [10200.583745] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TURKS_smc.bin [10200.583754] [drm] Internal thermal controller with fan control [10200.588415] [drm] radeon: dpm initialized [10200.634167] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin [10200.634251] [drm] GART: num cpu pages 262144, num gpu pages 262144 [10200.637208] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [10200.654134] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [10200.654267] radeon 0000:01:00.0: WB enabled [10200.654276] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0x000000002a0220cf [10200.654282] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0x00000000900ad08f [10200.655072] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x00000000baf04732 [10200.655078] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [10200.655080] [drm] Driver supports precise vblank timestamp query. [10200.655083] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [10200.655174] radeon 0000:01:00.0: radeon: using MSI. [10200.655226] [drm] radeon: irq initialized. [10200.671725] [drm] ring test on 0 succeeded in 2 usecs [10200.671739] [drm] ring test on 3 succeeded in 6 usecs [10200.847935] [drm] ring test on 5 succeeded in 2 usecs [10200.847946] [drm] UVD initialized successfully. [10200.848320] [drm] ib test on ring 0 succeeded in 0 usecs [10200.848420] [drm] ib test on ring 3 succeeded in 0 usecs [10201.526232] [drm] ib test on ring 5 succeeded [10201.527937] [drm] Radeon Display Connectors [10201.527940] [drm] Connector 0: [10201.527941] [drm] HDMI-A-1 [10201.527943] [drm] HPD2 [10201.527947] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [10201.527948] [drm] Encoders: [10201.527950] [drm] DFP1: INTERNAL_UNIPHY2 [10201.527952] [drm] Connector 1: [10201.527953] [drm] DVI-D-1 [10201.527954] [drm] HPD1 [10201.527958] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [10201.527959] [drm] Encoders: [10201.527961] [drm] DFP2: INTERNAL_UNIPHY [10201.527962] [drm] Connector 2: [10201.527963] [drm] VGA-1 [10201.527966] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [10201.527967] [drm] Encoders: [10201.527969] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [10201.623784] [drm] fb mappable at 0xD0363000 [10201.623788] [drm] vram apper at 0xD0000000 [10201.623790] [drm] size 8294400 [10201.623791] [drm] fb depth is 24 [10201.623793] [drm] pitch is 7680 [10201.623992] fbcon: radeondrmfb (fb0) is primary device [10201.670244] Console: switching to colour frame buffer device 240x67 [10201.691072] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [10201.722289] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [10202.251017] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card0/input4 [10202.314859] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [10202.314862] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [10202.314864] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [10202.314870] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [10202.314871] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e [10202.314872] snd_hda_codec_realtek hdaudioC1D0: inputs: [10202.314874] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [10202.314876] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [10202.314877] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [10202.333227] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input5 [10202.333735] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 [10202.333792] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 [10202.333849] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [10202.333903] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [10202.333959] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 [10202.334013] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [10202.334090] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [10202.414467] loop: module loaded [10234.152959] RPC: Registered named UNIX socket transport module. [10234.152961] RPC: Registered udp transport module. [10234.152961] RPC: Registered tcp transport module. [10234.152962] RPC: Registered tcp NFSv4.1 backchannel transport module. [10234.755874] Installing knfsd (copyright (C) 1996 XXX@XXX). [10236.194513] NFSD: Using UMH upcall client tracking operations. [10236.194520] NFSD: starting 90-second grace period (net f0000098) [10240.900289] fuse: init (API version 7.31) [10241.363031] mc: Linux media interface: v0.10 [10241.694152] usb 1-5: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [10241.694160] usb 1-5: [5] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 [10241.695292] usbcore: registered new interface driver snd-usb-audio [10241.843224] videodev: Linux video capture interface: v2.00 [10242.236966] uvcvideo: Found UVC 1.00 device Live Streamer CAM 313 (07ca:313a) [10242.236967] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [10242.236968] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [10242.266314] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized! [10242.266320] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! [10242.266324] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [10242.266564] input: Live Streamer CAM 313: Live Str as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input13 [10242.266827] usbcore: registered new interface driver uvcvideo [10242.266829] USB Video Class driver (1.1.1) [10377.900007] squashfs: version 4.0 (2009/01/31) Phillip Lougher [10627.710230] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [10627.710328] systemd[1]: Detected architecture x86-64. [10627.835110] systemd[1]: /lib/systemd/system/monopd.service:8: Special user nobody configured, this is not safe! [10628.376595] systemd-journald[293]: Received client request to relinquish /var/log/journal/d3c1ab25154743b3680dcea04cfa0184 access. [10628.607924] systemd-journald[293]: Received SIGTERM from PID 1 (systemd). [10628.608396] systemd[1]: Stopping Journal Service... [10628.612140] systemd[1]: systemd-journald.service: Succeeded. [10628.612455] systemd[1]: Stopped Journal Service. [10628.612493] systemd[1]: systemd-journald.service: Consumed 4.372s CPU time. [10628.644293] systemd[1]: Starting Journal Service... [10628.685740] systemd[1]: Started Journal Service. [10628.717547] systemd-journald[43928]: Received client request to flush runtime journal. [10788.657930] device-mapper: uevent: version 1.0.3 [10788.658039] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [10809.802589] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [10809.902795] JFS: nTxBlock = 8192, nTxLock = 65536 [10810.141720] QNX4 filesystem 0.2.3 registered. [10810.345564] raid6: sse2x4 gen() 2439 MB/s [10810.413559] raid6: sse2x4 xor() 1034 MB/s [10810.481569] raid6: sse2x2 gen() 2032 MB/s [10810.549557] raid6: sse2x2 xor() 1845 MB/s [10810.617581] raid6: sse2x1 gen() 1186 MB/s [10810.685562] raid6: sse2x1 xor() 1079 MB/s [10810.685565] raid6: using algorithm sse2x4 gen() 2439 MB/s [10810.685567] raid6: .... xor() 1034 MB/s, rmw enabled [10810.685569] raid6: using intx1 recovery algorithm [10810.746025] xor: measuring software checksum speed [10810.785558] prefetch64-sse: 3852.000 MB/sec [10810.825557] generic_sse: 3646.000 MB/sec [10810.825560] xor: using function: prefetch64-sse (3852.000 MB/sec) [10811.118454] Btrfs loaded, crc32c=crc32c-generic [11164.549249] EXT4-fs (sdf10): mounting ext3 file system using the ext4 subsystem [11165.232584] EXT4-fs (sdf10): warning: checktime reached, running e2fsck is recommended [11165.328069] EXT4-fs (sdf10): recovery complete [11165.357300] EXT4-fs (sdf10): mounted filesystem with ordered data mode. Opts: (null) [11165.357336] ext3 filesystem being mounted at /store10 supports timestamps until 2038 (0x7fffffff) [11165.365916] EXT4-fs (sdf11): mounting ext3 file system using the ext4 subsystem [11166.688221] EXT4-fs (sdf11): warning: checktime reached, running e2fsck is recommended [11166.821063] EXT4-fs (sdf11): recovery complete [11166.829363] EXT4-fs (sdf11): mounted filesystem with ordered data mode. Opts: (null) [11166.829397] ext3 filesystem being mounted at /store11 supports timestamps until 2038 (0x7fffffff) [11167.157465] ata4.00: exception Emask 0x10 SAct 0x7fff00 SErr 0x0 action 0x6 frozen [11167.157475] ata4.00: irq_stat 0x08000000, interface fatal error [11167.157486] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157501] ata4.00: cmd 61/20:40:90:1c:c0/00:00:09:00:00/40 tag 8 ncq dma 16384 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157507] ata4.00: status: { DRDY } [11167.157512] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157524] ata4.00: cmd 61/28:48:b8:1c:c0/00:00:09:00:00/40 tag 9 ncq dma 20480 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157528] ata4.00: status: { DRDY } [11167.157533] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157544] ata4.00: cmd 61/08:50:f0:1c:c0/00:00:09:00:00/40 tag 10 ncq dma 4096 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157548] ata4.00: status: { DRDY } [11167.157553] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157563] ata4.00: cmd 61/10:58:00:1d:c0/00:00:09:00:00/40 tag 11 ncq dma 8192 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157567] ata4.00: status: { DRDY } [11167.157572] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157582] ata4.00: cmd 61/08:60:48:1d:c0/00:00:09:00:00/40 tag 12 ncq dma 4096 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157586] ata4.00: status: { DRDY } [11167.157590] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157601] ata4.00: cmd 61/10:68:80:1d:c0/00:00:09:00:00/40 tag 13 ncq dma 8192 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157605] ata4.00: status: { DRDY } [11167.157609] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157620] ata4.00: cmd 61/10:70:98:1d:c0/00:00:09:00:00/40 tag 14 ncq dma 8192 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157624] ata4.00: status: { DRDY } [11167.157628] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157638] ata4.00: cmd 61/10:78:b0:1d:c0/00:00:09:00:00/40 tag 15 ncq dma 8192 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157642] ata4.00: status: { DRDY } [11167.157646] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157657] ata4.00: cmd 61/20:80:d0:1d:c0/00:00:09:00:00/40 tag 16 ncq dma 16384 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157661] ata4.00: status: { DRDY } [11167.157665] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157676] ata4.00: cmd 61/20:88:18:1e:c0/00:00:09:00:00/40 tag 17 ncq dma 16384 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157680] ata4.00: status: { DRDY } [11167.157684] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157695] ata4.00: cmd 61/08:90:58:1e:c0/00:00:09:00:00/40 tag 18 ncq dma 4096 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157699] ata4.00: status: { DRDY } [11167.157703] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157714] ata4.00: cmd 61/08:98:68:1e:c0/00:00:09:00:00/40 tag 19 ncq dma 4096 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157718] ata4.00: status: { DRDY } [11167.157722] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157732] ata4.00: cmd 61/10:a0:78:1e:c0/00:00:09:00:00/40 tag 20 ncq dma 8192 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157736] ata4.00: status: { DRDY } [11167.157741] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157751] ata4.00: cmd 61/10:a8:98:1e:c0/00:00:09:00:00/40 tag 21 ncq dma 8192 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157755] ata4.00: status: { DRDY } [11167.157759] ata4.00: failed command: WRITE FPDMA QUEUED [11167.157770] ata4.00: cmd 61/10:b0:b0:1e:c0/00:00:09:00:00/40 tag 22 ncq dma 8192 out res 40/00:40:90:1c:c0/00:00:09:00:00/40 Emask 0x10 (ATA bus error) [11167.157774] ata4.00: status: { DRDY } [11167.157781] ata4: hard resetting link [11167.633279] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [11167.635255] ata4.00: supports DRM functions and may not be fully accessible [11167.638745] ata4.00: supports DRM functions and may not be fully accessible [11167.641855] ata4.00: configured for UDMA/133 [11167.641920] ata4: EH complete [11167.642310] ata4.00: Enabling discard_zeroes_data [11167.770335] ata4: log page 10h reported inactive tag 11 [11167.770355] ata4.00: exception Emask 0x1 SAct 0x7ff8f01f SErr 0x0 action 0x0 [11167.770360] ata4.00: irq_stat 0x40000008 [11167.770367] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770380] ata4.00: cmd 61/08:00:a0:3b:40/00:00:0c:00:00/40 tag 0 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770385] ata4.00: status: { DRDY } [11167.770390] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770401] ata4.00: cmd 61/10:08:c8:3b:40/00:00:0c:00:00/40 tag 1 ncq dma 8192 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770406] ata4.00: status: { DRDY } [11167.770410] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770421] ata4.00: cmd 61/08:10:f8:3b:40/00:00:0c:00:00/40 tag 2 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770425] ata4.00: status: { DRDY } [11167.770429] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770440] ata4.00: cmd 61/08:18:18:3c:40/00:00:0c:00:00/40 tag 3 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770444] ata4.00: status: { DRDY } [11167.770448] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770458] ata4.00: cmd 61/10:20:30:3c:40/00:00:0c:00:00/40 tag 4 ncq dma 8192 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770462] ata4.00: status: { DRDY } [11167.770467] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770477] ata4.00: cmd 61/10:60:a8:34:40/00:00:0c:00:00/40 tag 12 ncq dma 8192 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770482] ata4.00: status: { DRDY } [11167.770486] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770496] ata4.00: cmd 61/28:68:d8:34:40/00:00:0c:00:00/40 tag 13 ncq dma 20480 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770501] ata4.00: status: { DRDY } [11167.770505] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770515] ata4.00: cmd 61/10:70:28:35:40/00:00:0c:00:00/40 tag 14 ncq dma 8192 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770519] ata4.00: status: { DRDY } [11167.770523] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770534] ata4.00: cmd 61/08:78:40:35:40/00:00:0c:00:00/40 tag 15 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770538] ata4.00: status: { DRDY } [11167.770542] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770553] ata4.00: cmd 61/08:98:68:35:40/00:00:0c:00:00/40 tag 19 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770557] ata4.00: status: { DRDY } [11167.770561] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770572] ata4.00: cmd 61/10:a0:98:35:40/00:00:0c:00:00/40 tag 20 ncq dma 8192 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770576] ata4.00: status: { DRDY } [11167.770580] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770590] ata4.00: cmd 61/08:a8:d0:35:40/00:00:0c:00:00/40 tag 21 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770594] ata4.00: status: { DRDY } [11167.770599] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770609] ata4.00: cmd 61/08:b0:e8:35:40/00:00:0c:00:00/40 tag 22 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770613] ata4.00: status: { DRDY } [11167.770617] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770628] ata4.00: cmd 61/08:b8:60:36:40/00:00:0c:00:00/40 tag 23 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770632] ata4.00: status: { DRDY } [11167.770636] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770646] ata4.00: cmd 61/20:c0:10:37:40/00:00:0c:00:00/40 tag 24 ncq dma 16384 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770651] ata4.00: status: { DRDY } [11167.770655] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770665] ata4.00: cmd 61/08:c8:60:38:40/00:00:0c:00:00/40 tag 25 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770669] ata4.00: status: { DRDY } [11167.770674] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770684] ata4.00: cmd 61/10:d0:e8:3a:40/00:00:0c:00:00/40 tag 26 ncq dma 8192 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770688] ata4.00: status: { DRDY } [11167.770692] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770703] ata4.00: cmd 61/08:d8:18:3b:40/00:00:0c:00:00/40 tag 27 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770707] ata4.00: status: { DRDY } [11167.770711] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770721] ata4.00: cmd 61/08:e0:40:3b:40/00:00:0c:00:00/40 tag 28 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770725] ata4.00: status: { DRDY } [11167.770730] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770740] ata4.00: cmd 61/10:e8:58:3b:40/00:00:0c:00:00/40 tag 29 ncq dma 8192 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770744] ata4.00: status: { DRDY } [11167.770748] ata4.00: failed command: WRITE FPDMA QUEUED [11167.770759] ata4.00: cmd 61/08:f0:80:3b:40/00:00:0c:00:00/40 tag 30 ncq dma 4096 out res 40/00:20:30:3c:40/00:00:0c:00:00/40 Emask 0x1 (device error) [11167.770763] ata4.00: status: { DRDY } [11167.771192] ata4.00: supports DRM functions and may not be fully accessible [11167.774617] ata4.00: supports DRM functions and may not be fully accessible [11167.777638] ata4.00: configured for UDMA/133 [11167.777674] ata4: EH complete [11167.777771] ata4.00: Enabling discard_zeroes_data [11167.853367] EXT4-fs (sdd6): warning: mounting fs with errors, running e2fsck is recommended [11167.856095] EXT4-fs (sdd6): recovery complete [11167.857318] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null) [11167.941511] ata4.00: exception Emask 0x10 SAct 0x1fffe SErr 0x0 action 0x6 frozen [11167.941515] ata4.00: irq_stat 0x08000000, interface fatal error [11167.941519] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941524] ata4.00: cmd 61/20:08:20:2e:40/00:00:74:00:00/40 tag 1 ncq dma 16384 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941526] ata4.00: status: { DRDY } [11167.941529] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941533] ata4.00: cmd 61/08:10:70:2e:40/00:00:74:00:00/40 tag 2 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941535] ata4.00: status: { DRDY } [11167.941537] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941541] ata4.00: cmd 61/08:18:90:2e:40/00:00:74:00:00/40 tag 3 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941542] ata4.00: status: { DRDY } [11167.941544] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941548] ata4.00: cmd 61/08:20:c0:2e:40/00:00:74:00:00/40 tag 4 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941550] ata4.00: status: { DRDY } [11167.941551] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941555] ata4.00: cmd 61/18:28:f0:2e:40/00:00:74:00:00/40 tag 5 ncq dma 12288 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941557] ata4.00: status: { DRDY } [11167.941559] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941563] ata4.00: cmd 61/10:30:30:2f:40/00:00:74:00:00/40 tag 6 ncq dma 8192 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941564] ata4.00: status: { DRDY } [11167.941566] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941570] ata4.00: cmd 61/08:38:00:21:80/00:00:74:00:00/40 tag 7 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941571] ata4.00: status: { DRDY } [11167.941573] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941577] ata4.00: cmd 61/08:40:30:21:80/00:00:74:00:00/40 tag 8 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941578] ata4.00: status: { DRDY } [11167.941580] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941584] ata4.00: cmd 61/08:48:40:21:80/00:00:74:00:00/40 tag 9 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941586] ata4.00: status: { DRDY } [11167.941587] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941591] ata4.00: cmd 61/10:50:78:21:80/00:00:74:00:00/40 tag 10 ncq dma 8192 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941593] ata4.00: status: { DRDY } [11167.941595] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941599] ata4.00: cmd 61/08:58:98:21:80/00:00:74:00:00/40 tag 11 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941600] ata4.00: status: { DRDY } [11167.941602] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941606] ata4.00: cmd 61/08:60:b8:21:80/00:00:74:00:00/40 tag 12 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941608] ata4.00: status: { DRDY } [11167.941609] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941613] ata4.00: cmd 61/18:68:c8:21:80/00:00:74:00:00/40 tag 13 ncq dma 12288 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941615] ata4.00: status: { DRDY } [11167.941617] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941621] ata4.00: cmd 61/08:70:38:22:80/00:00:74:00:00/40 tag 14 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941622] ata4.00: status: { DRDY } [11167.941624] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941628] ata4.00: cmd 61/08:78:a8:22:80/00:00:74:00:00/40 tag 15 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941629] ata4.00: status: { DRDY } [11167.941631] ata4.00: failed command: WRITE FPDMA QUEUED [11167.941635] ata4.00: cmd 61/08:80:30:23:80/00:00:74:00:00/40 tag 16 ncq dma 4096 out res 40/00:08:20:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11167.941637] ata4.00: status: { DRDY } [11167.941640] ata4: hard resetting link [11168.417340] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [11168.419179] ata4.00: supports DRM functions and may not be fully accessible [11168.422743] ata4.00: supports DRM functions and may not be fully accessible [11168.425877] ata4.00: configured for UDMA/133 [11168.425944] ata4: EH complete [11168.426334] ata4.00: Enabling discard_zeroes_data [11168.461399] ata4.00: exception Emask 0x10 SAct 0x3e SErr 0x0 action 0x6 frozen [11168.461409] ata4.00: irq_stat 0x08000000, interface fatal error [11168.461416] ata4.00: failed command: WRITE FPDMA QUEUED [11168.461431] ata4.00: cmd 61/18:08:f0:2e:40/00:00:74:00:00/40 tag 1 ncq dma 12288 out res 40/00:08:f0:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.461437] ata4.00: status: { DRDY } [11168.461443] ata4.00: failed command: WRITE FPDMA QUEUED [11168.461454] ata4.00: cmd 61/08:10:c0:2e:40/00:00:74:00:00/40 tag 2 ncq dma 4096 out res 40/00:08:f0:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.461459] ata4.00: status: { DRDY } [11168.461463] ata4.00: failed command: WRITE FPDMA QUEUED [11168.461474] ata4.00: cmd 61/08:18:90:2e:40/00:00:74:00:00/40 tag 3 ncq dma 4096 out res 40/00:08:f0:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.461478] ata4.00: status: { DRDY } [11168.461483] ata4.00: failed command: WRITE FPDMA QUEUED [11168.461493] ata4.00: cmd 61/08:20:70:2e:40/00:00:74:00:00/40 tag 4 ncq dma 4096 out res 40/00:08:f0:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.461497] ata4.00: status: { DRDY } [11168.461502] ata4.00: failed command: WRITE FPDMA QUEUED [11168.461512] ata4.00: cmd 61/20:28:20:2e:40/00:00:74:00:00/40 tag 5 ncq dma 16384 out res 40/00:08:f0:2e:40/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.461516] ata4.00: status: { DRDY } [11168.461524] ata4: hard resetting link [11168.941303] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [11168.943178] ata4.00: supports DRM functions and may not be fully accessible [11168.946725] ata4.00: supports DRM functions and may not be fully accessible [11168.949774] ata4.00: configured for UDMA/133 [11168.949810] ata4: EH complete [11168.950074] ata4.00: Enabling discard_zeroes_data [11168.989336] ata4: limiting SATA link speed to 3.0 Gbps [11168.989346] ata4.00: exception Emask 0x10 SAct 0x7fffe3f0 SErr 0x0 action 0x6 frozen [11168.989354] ata4.00: irq_stat 0x08000000, interface fatal error [11168.989362] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989376] ata4.00: cmd 61/08:20:38:24:c0/00:00:74:00:00/40 tag 4 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989383] ata4.00: status: { DRDY } [11168.989388] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989400] ata4.00: cmd 61/08:28:70:24:c0/00:00:74:00:00/40 tag 5 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989404] ata4.00: status: { DRDY } [11168.989409] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989420] ata4.00: cmd 61/08:30:a8:24:c0/00:00:74:00:00/40 tag 6 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989424] ata4.00: status: { DRDY } [11168.989428] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989439] ata4.00: cmd 61/10:38:f0:24:c0/00:00:74:00:00/40 tag 7 ncq dma 8192 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989443] ata4.00: status: { DRDY } [11168.989447] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989458] ata4.00: cmd 61/08:40:48:25:c0/00:00:74:00:00/40 tag 8 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989462] ata4.00: status: { DRDY } [11168.989466] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989477] ata4.00: cmd 61/08:48:60:25:c0/00:00:74:00:00/40 tag 9 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989481] ata4.00: status: { DRDY } [11168.989485] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989496] ata4.00: cmd 61/10:68:08:28:80/00:00:74:00:00/40 tag 13 ncq dma 8192 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989500] ata4.00: status: { DRDY } [11168.989505] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989516] ata4.00: cmd 61/10:70:20:28:80/00:00:74:00:00/40 tag 14 ncq dma 8192 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989520] ata4.00: status: { DRDY } [11168.989524] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989535] ata4.00: cmd 61/70:78:38:28:80/00:00:74:00:00/40 tag 15 ncq dma 57344 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989539] ata4.00: status: { DRDY } [11168.989543] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989554] ata4.00: cmd 61/18:80:b0:28:80/02:00:74:00:00/40 tag 16 ncq dma 274432 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989558] ata4.00: status: { DRDY } [11168.989562] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989573] ata4.00: cmd 61/40:88:00:21:c0/00:00:74:00:00/40 tag 17 ncq dma 32768 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989577] ata4.00: status: { DRDY } [11168.989581] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989592] ata4.00: cmd 61/20:90:58:21:c0/00:00:74:00:00/40 tag 18 ncq dma 16384 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989596] ata4.00: status: { DRDY } [11168.989600] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989610] ata4.00: cmd 61/a0:98:98:21:c0/00:00:74:00:00/40 tag 19 ncq dma 81920 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989614] ata4.00: status: { DRDY } [11168.989619] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989629] ata4.00: cmd 61/20:a0:40:22:c0/00:00:74:00:00/40 tag 20 ncq dma 16384 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989633] ata4.00: status: { DRDY } [11168.989637] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989648] ata4.00: cmd 61/28:a8:68:22:c0/00:00:74:00:00/40 tag 21 ncq dma 20480 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989652] ata4.00: status: { DRDY } [11168.989656] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989667] ata4.00: cmd 61/18:b0:98:22:c0/00:00:74:00:00/40 tag 22 ncq dma 12288 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989671] ata4.00: status: { DRDY } [11168.989675] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989686] ata4.00: cmd 61/08:b8:b8:22:c0/00:00:74:00:00/40 tag 23 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989690] ata4.00: status: { DRDY } [11168.989694] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989705] ata4.00: cmd 61/08:c0:f0:22:c0/00:00:74:00:00/40 tag 24 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989709] ata4.00: status: { DRDY } [11168.989713] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989724] ata4.00: cmd 61/08:c8:00:23:c0/00:00:74:00:00/40 tag 25 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989728] ata4.00: status: { DRDY } [11168.989732] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989743] ata4.00: cmd 61/18:d0:28:23:c0/00:00:74:00:00/40 tag 26 ncq dma 12288 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989747] ata4.00: status: { DRDY } [11168.989751] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989761] ata4.00: cmd 61/a8:d8:48:23:c0/00:00:74:00:00/40 tag 27 ncq dma 86016 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989766] ata4.00: status: { DRDY } [11168.989770] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989780] ata4.00: cmd 61/08:e0:00:24:c0/00:00:74:00:00/40 tag 28 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989784] ata4.00: status: { DRDY } [11168.989789] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989799] ata4.00: cmd 61/08:e8:10:24:c0/00:00:74:00:00/40 tag 29 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989803] ata4.00: status: { DRDY } [11168.989807] ata4.00: failed command: WRITE FPDMA QUEUED [11168.989818] ata4.00: cmd 61/08:f0:28:24:c0/00:00:74:00:00/40 tag 30 ncq dma 4096 out res 40/00:68:08:28:80/00:00:74:00:00/40 Emask 0x10 (ATA bus error) [11168.989822] ata4.00: status: { DRDY } [11168.989829] ata4: hard resetting link [11169.469448] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [11169.471355] ata4.00: supports DRM functions and may not be fully accessible [11169.475070] ata4.00: supports DRM functions and may not be fully accessible [11169.478155] ata4.00: configured for UDMA/133 [11169.478254] ata4: EH complete [11169.478555] ata4.00: Enabling discard_zeroes_data [11169.504673] EXT4-fs (sdd7): recovery complete [11169.505950] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null) [11169.623990] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [11169.941058] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended [11170.291922] EXT4-fs (sda1): recovery complete [11170.297252] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [11170.311585] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem [11189.563312] EXT4-fs (sda2): warning: checktime reached, running e2fsck is recommended [11189.838548] EXT4-fs (sda2): recovery complete [11189.851019] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [11189.887357] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem [11190.437444] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended [11190.861330] EXT4-fs (sda5): recovery complete [11190.907944] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [11192.977821] EXT4-fs (sdg2): recovery complete [11192.992140] EXT4-fs (sdg2): mounted filesystem with ordered data mode. Opts: (null) [11193.460000] EXT4-fs (sdg6): recovery complete [11193.516800] EXT4-fs (sdg6): mounted filesystem with ordered data mode. Opts: (null) [11193.666367] EXT4-fs (sdg7): recovery complete [11193.679308] EXT4-fs (sdg7): mounted filesystem with ordered data mode. Opts: (null) [11474.026582] EXT4-fs (sdd6): error count since last fsck: 1 [11474.026631] EXT4-fs (sdd6): initial error at time 1662489263: __ext4_get_inode_loc:4342: inode 1179649: block 4718624 [11474.026645] EXT4-fs (sdd6): last error at time 1662489263: __ext4_get_inode_loc:4342: inode 1179649: block 4718624 [57825.312346] sd 0:0:0:0: Attached scsi generic sg0 type 0 [57825.312419] sd 0:0:1:0: Attached scsi generic sg1 type 0 [57825.312484] sd 2:0:0:0: Attached scsi generic sg2 type 0 [57825.312544] sd 3:0:0:0: Attached scsi generic sg3 type 0 [57825.312603] sd 4:0:0:0: Attached scsi generic sg4 type 0 [57825.312663] sr 6:0:0:0: Attached scsi generic sg5 type 5 [57825.312726] sd 8:0:0:0: Attached scsi generic sg6 type 0 [57825.312790] sd 10:0:0:0: Attached scsi generic sg7 type 0 [57842.853659] proc: Bad value for 'hidepid' [58149.249843] proc: Bad value for 'hidepid' [82354.783213] RPC: fragment too large: 1195725856 [87926.003073] RPC: fragment too large: 50331695 [95309.166177] RPC: fragment too large: 1296518222 [100962.787880] EXT4-fs (sdd6): error count since last fsck: 1 [100962.787924] EXT4-fs (sdd6): initial error at time 1662489263: __ext4_get_inode_loc:4342: inode 1179649: block 4718624 [100962.787933] EXT4-fs (sdd6): last error at time 1662489263: __ext4_get_inode_loc:4342: inode 1179649: block 4718624 [103886.631009] ata4.00: exception Emask 0x10 SAct 0xfffc000 SErr 0x0 action 0x6 frozen [103886.631019] ata4.00: irq_stat 0x08000000, interface fatal error [103886.631027] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631042] ata4.00: cmd 61/18:70:18:25:40/00:00:0a:00:00/40 tag 14 ncq dma 12288 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631047] ata4.00: status: { DRDY } [103886.631053] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631065] ata4.00: cmd 61/08:78:58:25:40/00:00:0a:00:00/40 tag 15 ncq dma 4096 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631070] ata4.00: status: { DRDY } [103886.631075] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631086] ata4.00: cmd 61/08:80:68:25:40/00:00:0a:00:00/40 tag 16 ncq dma 4096 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631090] ata4.00: status: { DRDY } [103886.631094] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631105] ata4.00: cmd 61/10:88:78:25:40/00:00:0a:00:00/40 tag 17 ncq dma 8192 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631109] ata4.00: status: { DRDY } [103886.631114] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631124] ata4.00: cmd 61/08:90:90:25:40/00:00:0a:00:00/40 tag 18 ncq dma 4096 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631128] ata4.00: status: { DRDY } [103886.631132] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631143] ata4.00: cmd 61/08:98:a0:25:40/00:00:0a:00:00/40 tag 19 ncq dma 4096 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631147] ata4.00: status: { DRDY } [103886.631151] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631162] ata4.00: cmd 61/10:a0:b0:25:40/00:00:0a:00:00/40 tag 20 ncq dma 8192 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631166] ata4.00: status: { DRDY } [103886.631170] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631189] ata4.00: cmd 61/08:a8:c8:25:40/00:00:0a:00:00/40 tag 21 ncq dma 4096 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631193] ata4.00: status: { DRDY } [103886.631197] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631208] ata4.00: cmd 61/08:b0:d8:25:40/00:00:0a:00:00/40 tag 22 ncq dma 4096 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631212] ata4.00: status: { DRDY } [103886.631229] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631240] ata4.00: cmd 61/18:b8:f8:25:40/00:00:0a:00:00/40 tag 23 ncq dma 12288 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631244] ata4.00: status: { DRDY } [103886.631249] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631259] ata4.00: cmd 61/10:c0:50:26:40/00:00:0a:00:00/40 tag 24 ncq dma 8192 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631263] ata4.00: status: { DRDY } [103886.631268] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631278] ata4.00: cmd 61/08:c8:80:26:40/00:00:0a:00:00/40 tag 25 ncq dma 4096 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631282] ata4.00: status: { DRDY } [103886.631287] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631297] ata4.00: cmd 61/18:d0:98:26:40/00:00:0a:00:00/40 tag 26 ncq dma 12288 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631302] ata4.00: status: { DRDY } [103886.631306] ata4.00: failed command: WRITE FPDMA QUEUED [103886.631316] ata4.00: cmd 61/10:d8:c0:26:40/00:00:0a:00:00/40 tag 27 ncq dma 8192 out res 40/00:70:18:25:40/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [103886.631320] ata4.00: status: { DRDY } [103886.631328] ata4: hard resetting link [103887.106770] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [103887.108675] ata4.00: supports DRM functions and may not be fully accessible [103887.112406] ata4.00: supports DRM functions and may not be fully accessible [103887.115489] ata4.00: configured for UDMA/133 [103887.115514] ata4: EH complete [103887.115777] ata4.00: Enabling discard_zeroes_data [103918.042641] sd 10:0:0:0: [sdg] tag#24 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT [103918.042653] sd 10:0:0:0: [sdg] tag#24 CDB: Write(16) 8a 00 00 00 00 00 c0 40 09 00 00 00 00 18 00 00 [103918.042978] sd 10:0:0:0: [sdg] tag#23 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT [103918.042983] sd 10:0:0:0: [sdg] tag#23 CDB: Write(16) 8a 00 00 00 00 00 c0 00 09 00 00 00 00 08 00 00 [103918.043059] sd 10:0:0:0: [sdg] tag#22 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT [103918.043064] sd 10:0:0:0: [sdg] tag#22 CDB: Write(16) 8a 00 00 00 00 00 bf c0 09 30 00 00 00 08 00 00 [103918.043158] sd 10:0:0:0: [sdg] tag#21 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT [103918.043163] sd 10:0:0:0: [sdg] tag#21 CDB: Write(16) 8a 00 00 00 00 00 bf c0 09 20 00 00 00 08 00 00 [103918.043256] sd 10:0:0:0: [sdg] tag#20 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT [103918.043262] sd 10:0:0:0: [sdg] tag#20 CDB: Write(16) 8a 00 00 00 00 00 bf c0 09 00 00 00 00 18 00 00 [103918.043357] sd 10:0:0:0: [sdg] tag#19 uas_eh_abort_handler 0 uas-tag 16 inflight: CMD OUT [103918.043362] sd 10:0:0:0: [sdg] tag#19 CDB: Write(16) 8a 00 00 00 00 00 bf 80 09 00 00 00 00 18 00 00 [103918.043459] sd 10:0:0:0: [sdg] tag#18 uas_eh_abort_handler 0 uas-tag 15 inflight: CMD OUT [103918.043464] sd 10:0:0:0: [sdg] tag#18 CDB: Write(16) 8a 00 00 00 00 00 bf 40 09 00 00 00 00 18 00 00 [103918.043600] sd 10:0:0:0: [sdg] tag#17 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT [103918.043612] sd 10:0:0:0: [sdg] tag#17 CDB: Write(16) 8a 00 00 00 00 00 bf 00 09 00 00 00 00 18 00 00 [103918.043805] sd 10:0:0:0: [sdg] tag#16 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT [103918.043811] sd 10:0:0:0: [sdg] tag#16 CDB: Write(16) 8a 00 00 00 00 00 be c0 09 00 00 00 00 18 00 00 [103918.043901] sd 10:0:0:0: [sdg] tag#15 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT [103918.043907] sd 10:0:0:0: [sdg] tag#15 CDB: Write(16) 8a 00 00 00 00 00 be 80 09 00 00 00 00 20 00 00 [103918.044000] sd 10:0:0:0: [sdg] tag#14 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT [103918.044006] sd 10:0:0:0: [sdg] tag#14 CDB: Write(16) 8a 00 00 00 00 00 be 40 09 00 00 00 00 28 00 00 [103918.044100] sd 10:0:0:0: [sdg] tag#13 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT [103918.044105] sd 10:0:0:0: [sdg] tag#13 CDB: Write(16) 8a 00 00 00 00 00 be 00 09 00 00 00 00 10 00 00 [103918.044199] sd 10:0:0:0: [sdg] tag#12 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT [103918.044205] sd 10:0:0:0: [sdg] tag#12 CDB: Write(16) 8a 00 00 00 00 00 bd c0 09 00 00 00 00 10 00 00 [103918.044298] sd 10:0:0:0: [sdg] tag#11 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT [103918.044304] sd 10:0:0:0: [sdg] tag#11 CDB: Write(16) 8a 00 00 00 00 00 bd 80 09 08 00 00 00 10 00 00 [103918.044398] sd 10:0:0:0: [sdg] tag#10 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [103918.044403] sd 10:0:0:0: [sdg] tag#10 CDB: Write(16) 8a 00 00 00 00 00 bd 00 0a c8 00 00 00 08 00 00 [103918.044499] sd 10:0:0:0: [sdg] tag#9 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT [103918.044504] sd 10:0:0:0: [sdg] tag#9 CDB: Write(16) 8a 00 00 00 00 00 bd 00 0a a8 00 00 00 08 00 00 [103918.044598] sd 10:0:0:0: [sdg] tag#8 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT [103918.044603] sd 10:0:0:0: [sdg] tag#8 CDB: Write(16) 8a 00 00 00 00 00 bd 00 0a 78 00 00 00 10 00 00 [103918.044697] sd 10:0:0:0: [sdg] tag#7 uas_eh_abort_handler 0 uas-tag 3 inflight: [103918.044702] sd 10:0:0:0: [sdg] tag#7 CDB: Write(16) 8a 00 00 00 00 00 bd 00 0a 48 00 00 00 08 00 00 [103918.044710] sd 10:0:0:0: [sdg] tag#4 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT [103918.044715] sd 10:0:0:0: [sdg] tag#4 CDB: Write(16) 8a 00 00 00 00 00 bd 00 0a 68 00 00 00 08 00 00 [103918.062702] scsi host10: uas_eh_device_reset_handler start [103918.143823] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [103918.169862] scsi host10: uas_eh_device_reset_handler success [104002.009920] sd 10:0:0:0: [sdg] tag#24 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT [104002.009932] sd 10:0:0:0: [sdg] tag#24 CDB: Write(16) 8a 00 00 00 00 00 da 40 0b 70 00 00 00 18 00 00 [104002.010121] sd 10:0:0:0: [sdg] tag#23 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT [104002.010127] sd 10:0:0:0: [sdg] tag#23 CDB: Write(16) 8a 00 00 00 00 00 da 40 0b 60 00 00 00 08 00 00 [104002.010205] sd 10:0:0:0: [sdg] tag#22 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT [104002.010211] sd 10:0:0:0: [sdg] tag#22 CDB: Write(16) 8a 00 00 00 00 00 da 40 0b 40 00 00 00 18 00 00 [104002.010304] sd 10:0:0:0: [sdg] tag#21 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT [104002.010309] sd 10:0:0:0: [sdg] tag#21 CDB: Write(16) 8a 00 00 00 00 00 da 40 0a c0 00 00 00 08 00 00 [104002.010402] sd 10:0:0:0: [sdg] tag#20 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT [104002.010408] sd 10:0:0:0: [sdg] tag#20 CDB: Write(16) 8a 00 00 00 00 00 da 40 0a 90 00 00 00 28 00 00 [104002.010502] sd 10:0:0:0: [sdg] tag#6 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT [104002.010507] sd 10:0:0:0: [sdg] tag#6 CDB: Write(16) 8a 00 00 00 00 00 da 40 0a 60 00 00 00 28 00 00 [104002.010601] sd 10:0:0:0: [sdg] tag#5 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT [104002.010606] sd 10:0:0:0: [sdg] tag#5 CDB: Write(16) 8a 00 00 00 00 00 da 40 0a 40 00 00 00 10 00 00 [104002.010704] sd 10:0:0:0: [sdg] tag#4 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT [104002.010710] sd 10:0:0:0: [sdg] tag#4 CDB: Write(16) 8a 00 00 00 00 00 da 40 0a 28 00 00 00 10 00 00 [104002.026004] scsi host10: uas_eh_device_reset_handler start [104002.107116] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [104002.133642] scsi host10: uas_eh_device_reset_handler success [108752.213407] RPC: fragment too large: 369295616 [159833.221206] RPC: fragment too large: 369295616 [159834.248322] RPC: fragment too large: 1195725856 [159925.936611] RPC: fragment too large: 369295616 [159926.960522] RPC: fragment too large: 1195725856 [176325.369741] RPC: fragment too large: 50331695 [182837.547480] proc: Bad value for 'hidepid' [192409.395591] RPC: fragment too large: 1296518222 [193236.810884] EXT4-fs (sdd6): error count since last fsck: 1 [193236.810940] EXT4-fs (sdd6): initial error at time 1662489263: __ext4_get_inode_loc:4342: inode 1179649: block 4718624 [193236.810956] EXT4-fs (sdd6): last error at time 1662489263: __ext4_get_inode_loc:4342: inode 1179649: block 4718624 [197269.053756] usb 2-3: new high-speed USB device number 3 using ehci-pci [197269.084267] usb 2-3: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00 [197269.084270] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [197269.084272] usb 2-3: Product: Mass Storage Device [197269.084273] usb 2-3: Manufacturer: Generic [197269.084274] usb 2-3: SerialNumber: ... [197269.086734] usb-storage 2-3:1.0: USB Mass Storage device detected [197269.087933] scsi host11: usb-storage 2-3:1.0 [197270.094851] scsi 11:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [197270.096602] sd 11:0:0:0: Attached scsi generic sg8 type 0 [197270.734074] sd 11:0:0:0: [sdh] 249737216 512-byte logical blocks: (128 GB/119 GiB) [197270.735073] sd 11:0:0:0: [sdh] Write Protect is off [197270.735076] sd 11:0:0:0: [sdh] Mode Sense: 03 00 00 00 [197270.736070] sd 11:0:0:0: [sdh] No Caching mode page found [197270.736076] sd 11:0:0:0: [sdh] Assuming drive cache: write through [197270.760042] sdh: sdh1 [197270.764571] sd 11:0:0:0: [sdh] Attached SCSI removable disk [215451.839573] RPC: fragment too large: 1195725856 [215455.113235] RPC: fragment too large: 302055450 [215458.357483] RPC: fragment too large: 50331692 [215473.948395] RPC: fragment too large: 369295616 [228720.215142] sd 10:0:0:0: [sdg] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT [228720.215154] sd 10:0:0:0: [sdg] tag#10 CDB: Write(16) 8a 00 00 00 00 02 bf ae d4 00 00 00 04 00 00 00 [228720.215408] sd 10:0:0:0: [sdg] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT [228720.215414] sd 10:0:0:0: [sdg] tag#9 CDB: Write(16) 8a 00 00 00 00 02 bf ae d0 00 00 00 04 00 00 00 [228720.215501] sd 10:0:0:0: [sdg] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT [228720.215507] sd 10:0:0:0: [sdg] tag#8 CDB: Write(16) 8a 00 00 00 00 02 bf ae cc 00 00 00 04 00 00 00 [228720.215600] sd 10:0:0:0: [sdg] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT [228720.215605] sd 10:0:0:0: [sdg] tag#7 CDB: Write(16) 8a 00 00 00 00 02 bf ae c8 00 00 00 04 00 00 00 [228720.235158] scsi host10: uas_eh_device_reset_handler start [228720.316494] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [228720.342627] scsi host10: uas_eh_device_reset_handler success [228721.585598] sd 11:0:0:0: [sdh] 249737216 512-byte logical blocks: (128 GB/119 GiB) [228721.592642] sdh: sdh1 [228755.030884] sd 10:0:0:0: [sdg] tag#28 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT [228755.030896] sd 10:0:0:0: [sdg] tag#28 CDB: Write(16) 8a 00 00 00 00 02 bf b3 58 00 00 00 04 00 00 00 [228755.031132] sd 10:0:0:0: [sdg] tag#27 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT [228755.031138] sd 10:0:0:0: [sdg] tag#27 CDB: Write(16) 8a 00 00 00 00 02 bf b3 54 00 00 00 04 00 00 00 [228755.031372] sd 10:0:0:0: [sdg] tag#26 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [228755.031378] sd 10:0:0:0: [sdg] tag#26 CDB: Write(16) 8a 00 00 00 00 02 bf b3 50 00 00 00 04 00 00 00 [228755.031481] sd 10:0:0:0: [sdg] tag#25 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT [228755.031486] sd 10:0:0:0: [sdg] tag#25 CDB: Write(16) 8a 00 00 00 00 02 bf b3 4c 00 00 00 04 00 00 00 [228755.031582] sd 10:0:0:0: [sdg] tag#24 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT [228755.031587] sd 10:0:0:0: [sdg] tag#24 CDB: Write(16) 8a 00 00 00 00 02 bf b3 48 00 00 00 04 00 00 00 [228755.031681] sd 10:0:0:0: [sdg] tag#22 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT [228755.031686] sd 10:0:0:0: [sdg] tag#22 CDB: Write(16) 8a 00 00 00 00 02 bf b3 24 00 00 00 04 00 00 00 [228755.031809] sd 10:0:0:0: [sdg] tag#21 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT [228755.031821] sd 10:0:0:0: [sdg] tag#21 CDB: Write(16) 8a 00 00 00 00 02 bf b3 20 00 00 00 04 00 00 00 [228755.031899] sd 10:0:0:0: [sdg] tag#1 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT [228755.031905] sd 10:0:0:0: [sdg] tag#1 CDB: Write(16) 8a 00 00 00 00 02 bf b3 60 00 00 00 04 00 00 00 [228755.031914] xhci_hcd 0000:02:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [228755.032123] sd 10:0:0:0: [sdg] tag#0 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT [228755.032128] sd 10:0:0:0: [sdg] tag#0 CDB: Write(16) 8a 00 00 00 00 02 bf b3 5c 00 00 00 04 00 00 00 [228755.058937] scsi host10: uas_eh_device_reset_handler start [228755.140254] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [228755.166535] scsi host10: uas_eh_device_reset_handler success [228822.614467] sd 10:0:0:0: [sdg] tag#14 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT [228822.614479] sd 10:0:0:0: [sdg] tag#14 CDB: Write(16) 8a 00 00 00 00 02 f9 75 ad a0 00 00 04 00 00 00 [228822.614719] sd 10:0:0:0: [sdg] tag#13 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT [228822.614725] sd 10:0:0:0: [sdg] tag#13 CDB: Write(16) 8a 00 00 00 00 02 f9 75 a9 a0 00 00 04 00 00 00 [228822.638420] scsi host10: uas_eh_device_reset_handler start [228822.719832] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [228822.745989] scsi host10: uas_eh_device_reset_handler success [231597.408691] sd 11:0:0:0: [sdh] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [231597.418496] sdh: sdh1 [232639.757243] usb 2-3: USB disconnect, device number 3 [235154.664143] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null) [269760.710794] proc: Bad value for 'hidepid' [271525.956875] RPC: fragment too large: 1212498244 [271526.429559] RPC: fragment too large: 1195725856 [271529.288724] RPC: fragment too large: 1195725856 [271532.154364] RPC: fragment too large: 1195725856 [271535.026604] RPC: fragment too large: 1195725856 [271537.882988] RPC: fragment too large: 1195725856 [271540.762255] RPC: fragment too large: 1195725856 [271543.638516] RPC: fragment too large: 1195725856 [272880.176892] proc: Bad value for 'hidepid' [273385.965507] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [273388.096504] r8169 0000:05:00.0: invalid short VPD tag 00 at offset 1 [273396.665539] cfg80211: Loading compiled-in X.509 certificates for regulatory database [273396.665800] cfg80211: Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [273396.666042] cfg80211: Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [273396.666281] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [273396.689306] platform regulatory.0: firmware: direct-loading firmware regulatory.db [273396.723683] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [276390.459640] ata4.00: exception Emask 0x10 SAct 0xe00 SErr 0x0 action 0x6 frozen [276390.459645] ata4.00: irq_stat 0x08000000, interface fatal error [276390.459648] ata4.00: failed command: WRITE FPDMA QUEUED [276390.459654] ata4.00: cmd 61/08:48:88:1f:00/00:00:0a:00:00/40 tag 9 ncq dma 4096 out res 40/00:48:88:1f:00/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [276390.459656] ata4.00: status: { DRDY } [276390.459658] ata4.00: failed command: WRITE FPDMA QUEUED [276390.459663] ata4.00: cmd 61/08:50:b8:1f:00/00:00:0a:00:00/40 tag 10 ncq dma 4096 out res 40/00:48:88:1f:00/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [276390.459664] ata4.00: status: { DRDY } [276390.459666] ata4.00: failed command: WRITE FPDMA QUEUED [276390.459670] ata4.00: cmd 61/18:58:c8:1f:00/00:00:0a:00:00/40 tag 11 ncq dma 12288 out res 40/00:48:88:1f:00/00:00:0a:00:00/40 Emask 0x10 (ATA bus error) [276390.459672] ata4.00: status: { DRDY } [276390.459676] ata4: hard resetting link [276390.935631] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [276390.937634] ata4.00: supports DRM functions and may not be fully accessible [276390.941577] ata4.00: supports DRM functions and may not be fully accessible [276390.944661] ata4.00: configured for UDMA/133 [276390.944674] ata4: EH complete [276390.944803] ata4.00: Enabling discard_zeroes_data [276428.031253] sd 10:0:0:0: [sdg] tag#28 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT [276428.031259] sd 10:0:0:0: [sdg] tag#28 CDB: Write(16) 8a 00 00 00 00 00 df 00 0a b0 00 00 00 10 00 00 [276428.031455] sd 10:0:0:0: [sdg] tag#27 uas_eh_abort_handler 0 uas-tag 16 inflight: CMD OUT [276428.031458] sd 10:0:0:0: [sdg] tag#27 CDB: Write(16) 8a 00 00 00 00 00 de c0 0b b8 00 00 00 18 00 00 [276428.031541] sd 10:0:0:0: [sdg] tag#26 uas_eh_abort_handler 0 uas-tag 15 inflight: CMD OUT [276428.031543] sd 10:0:0:0: [sdg] tag#26 CDB: Write(16) 8a 00 00 00 00 00 de 80 0e 90 00 00 00 10 00 00 [276428.031650] sd 10:0:0:0: [sdg] tag#25 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT [276428.031652] sd 10:0:0:0: [sdg] tag#25 CDB: Write(16) 8a 00 00 00 00 00 de 80 0c e8 00 00 00 08 00 00 [276428.031751] sd 10:0:0:0: [sdg] tag#24 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT [276428.031753] sd 10:0:0:0: [sdg] tag#24 CDB: Write(16) 8a 00 00 00 00 00 de 80 0b 50 00 00 00 30 00 00 [276428.031850] sd 10:0:0:0: [sdg] tag#23 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT [276428.031852] sd 10:0:0:0: [sdg] tag#23 CDB: Write(16) 8a 00 00 00 00 00 de 80 0b 30 00 00 00 08 00 00 [276428.031949] sd 10:0:0:0: [sdg] tag#22 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT [276428.031951] sd 10:0:0:0: [sdg] tag#22 CDB: Write(16) 8a 00 00 00 00 00 de 80 09 20 00 00 00 08 00 00 [276428.032048] sd 10:0:0:0: [sdg] tag#3 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT [276428.032050] sd 10:0:0:0: [sdg] tag#3 CDB: Write(16) 8a 00 00 00 00 00 df 80 2e 28 00 00 00 10 00 00 [276428.032149] sd 10:0:0:0: [sdg] tag#2 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT [276428.032151] sd 10:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 df 80 2d d0 00 00 00 10 00 00 [276428.032248] sd 10:0:0:0: [sdg] tag#1 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT [276428.032250] sd 10:0:0:0: [sdg] tag#1 CDB: Write(16) 8a 00 00 00 00 00 df 80 09 50 00 00 00 08 00 00 [276428.032347] sd 10:0:0:0: [sdg] tag#0 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT [276428.032349] sd 10:0:0:0: [sdg] tag#0 CDB: Write(16) 8a 00 00 00 00 00 df 40 0a f0 00 00 00 10 00 00 [276428.055848] scsi host10: uas_eh_device_reset_handler start [276428.136584] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [276428.162047] scsi host10: uas_eh_device_reset_handler success [276731.133195] sd 10:0:0:0: [sdg] tag#27 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT [276731.133208] sd 10:0:0:0: [sdg] tag#27 CDB: Write(16) 8a 00 00 00 00 00 db 80 0e a8 00 00 00 08 00 00 [276731.133442] sd 10:0:0:0: [sdg] tag#26 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT [276731.133448] sd 10:0:0:0: [sdg] tag#26 CDB: Write(16) 8a 00 00 00 00 00 db 80 0e 78 00 00 00 10 00 00 [276731.133522] sd 10:0:0:0: [sdg] tag#25 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT [276731.133527] sd 10:0:0:0: [sdg] tag#25 CDB: Write(16) 8a 00 00 00 00 00 db 80 0e 58 00 00 00 08 00 00 [276731.133621] sd 10:0:0:0: [sdg] tag#7 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT [276731.133627] sd 10:0:0:0: [sdg] tag#7 CDB: Write(16) 8a 00 00 00 00 00 db c0 0a b0 00 00 00 30 00 00 [276731.133722] sd 10:0:0:0: [sdg] tag#6 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT [276731.133728] sd 10:0:0:0: [sdg] tag#6 CDB: Write(16) 8a 00 00 00 00 00 db c0 0a 68 00 00 00 40 00 00 [276731.133820] sd 10:0:0:0: [sdg] tag#5 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT [276731.133825] sd 10:0:0:0: [sdg] tag#5 CDB: Write(16) 8a 00 00 00 00 00 db c0 0a 50 00 00 00 08 00 00 [276731.133919] sd 10:0:0:0: [sdg] tag#4 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT [276731.133924] sd 10:0:0:0: [sdg] tag#4 CDB: Write(16) 8a 00 00 00 00 00 db c0 0a 30 00 00 00 10 00 00 [276731.134020] sd 10:0:0:0: [sdg] tag#3 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT [276731.134026] sd 10:0:0:0: [sdg] tag#3 CDB: Write(16) 8a 00 00 00 00 00 db c0 0a 18 00 00 00 08 00 00 [276731.134118] sd 10:0:0:0: [sdg] tag#2 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [276731.134124] sd 10:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 db c0 09 a0 00 00 00 08 00 00 [276731.134218] sd 10:0:0:0: [sdg] tag#1 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT [276731.134223] sd 10:0:0:0: [sdg] tag#1 CDB: Write(16) 8a 00 00 00 00 00 db c0 09 80 00 00 00 18 00 00 [276731.134318] sd 10:0:0:0: [sdg] tag#0 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT [276731.134323] sd 10:0:0:0: [sdg] tag#0 CDB: Write(16) 8a 00 00 00 00 00 db c0 09 00 00 00 00 78 00 00 [276731.149079] scsi host10: uas_eh_device_reset_handler start [276731.230524] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [276731.256576] scsi host10: uas_eh_device_reset_handler success [283888.148339] RPC: fragment too large: 369295616 [285510.833882] EXT4-fs (sdd6): error count since last fsck: 1 [285510.833889] EXT4-fs (sdd6): initial error at time 1662489263: __ext4_get_inode_loc:4342: inode 1179649: block 4718624 [285510.833895] EXT4-fs (sdd6): last error at time 1662489263: __ext4_get_inode_loc:4342: inode 1179649: block 4718624 [289391.395176] RPC: fragment too large: 1296518222 [290113.365792] RPC: fragment too large: 1195725856 [290116.558171] RPC: fragment too large: 302055450 [290119.763692] RPC: fragment too large: 50331692 [290135.566025] RPC: fragment too large: 369295616 [310811.787571] usb 2-3: new high-speed USB device number 4 using ehci-pci [310811.818085] usb 2-3: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00 [310811.818093] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [310811.818098] usb 2-3: Product: Mass Storage Device [310811.818102] usb 2-3: Manufacturer: Generic [310811.818105] usb 2-3: SerialNumber: ... [310811.819548] usb-storage 2-3:1.0: USB Mass Storage device detected [310811.819908] scsi host11: usb-storage 2-3:1.0 [310812.828661] scsi 11:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 [310812.829592] sd 11:0:0:0: Attached scsi generic sg8 type 0 [310812.856827] sd 11:0:0:0: [sdh] Attached SCSI removable disk [310821.652606] sd 11:0:0:0: [sdh] 249737216 512-byte logical blocks: (128 GB/119 GiB) [310821.659558] sdh: sdh1 [311143.429123] sd 10:0:0:0: [sdg] tag#18 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT [311143.429134] sd 10:0:0:0: [sdg] tag#18 CDB: Write(16) 8a 00 00 00 00 02 bf ca 90 00 00 00 04 00 00 00 [311143.445180] scsi host10: uas_eh_device_reset_handler start [311143.530457] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [311143.556061] scsi host10: uas_eh_device_reset_handler success [311178.244927] sd 10:0:0:0: [sdg] tag#14 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT [311178.244939] sd 10:0:0:0: [sdg] tag#14 CDB: Write(16) 8a 00 00 00 00 02 bf d3 60 f0 00 00 04 00 00 00 [311178.245069] sd 10:0:0:0: [sdg] tag#13 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT [311178.245076] sd 10:0:0:0: [sdg] tag#13 CDB: Write(16) 8a 00 00 00 00 02 bf d3 5c f0 00 00 04 00 00 00 [311178.245166] sd 10:0:0:0: [sdg] tag#12 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT [311178.245172] sd 10:0:0:0: [sdg] tag#12 CDB: Write(16) 8a 00 00 00 00 02 bf d3 58 f0 00 00 04 00 00 00 [311178.245264] sd 10:0:0:0: [sdg] tag#11 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT [311178.245269] sd 10:0:0:0: [sdg] tag#11 CDB: Write(16) 8a 00 00 00 00 02 bf d3 54 f0 00 00 04 00 00 00 [311178.245361] sd 10:0:0:0: [sdg] tag#10 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [311178.245367] sd 10:0:0:0: [sdg] tag#10 CDB: Write(16) 8a 00 00 00 00 02 bf d3 50 f0 00 00 04 00 00 00 [311178.245461] sd 10:0:0:0: [sdg] tag#9 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT [311178.245467] sd 10:0:0:0: [sdg] tag#9 CDB: Write(16) 8a 00 00 00 00 02 bf d3 50 c0 00 00 00 30 00 00 [311178.245556] sd 10:0:0:0: [sdg] tag#8 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT [311178.245561] sd 10:0:0:0: [sdg] tag#8 CDB: Write(16) 8a 00 00 00 00 02 bf d3 4c c0 00 00 04 00 00 00 [311178.245659] sd 10:0:0:0: [sdg] tag#5 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT [311178.245665] sd 10:0:0:0: [sdg] tag#5 CDB: Write(16) 8a 00 00 00 00 02 bf d3 48 c0 00 00 04 00 00 00 [311178.276939] scsi host10: uas_eh_device_reset_handler start [311178.358183] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [311178.384651] scsi host10: uas_eh_device_reset_handler success [311258.116369] sd 10:0:0:0: [sdg] tag#18 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT [311258.116380] sd 10:0:0:0: [sdg] tag#18 CDB: Write(16) 8a 00 00 00 00 02 bf db d6 10 00 00 04 00 00 00 [311258.116610] sd 10:0:0:0: [sdg] tag#17 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT [311258.116616] sd 10:0:0:0: [sdg] tag#17 CDB: Write(16) 8a 00 00 00 00 02 bf db d2 10 00 00 04 00 00 00 [311258.116851] sd 10:0:0:0: [sdg] tag#16 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT [311258.116857] sd 10:0:0:0: [sdg] tag#16 CDB: Write(16) 8a 00 00 00 00 02 bf db d0 00 00 00 02 10 00 00 [311258.116958] sd 10:0:0:0: [sdg] tag#15 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT [311258.116963] sd 10:0:0:0: [sdg] tag#15 CDB: Write(16) 8a 00 00 00 00 02 bf db cc 00 00 00 04 00 00 00 [311258.117060] sd 10:0:0:0: [sdg] tag#14 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [311258.117065] sd 10:0:0:0: [sdg] tag#14 CDB: Write(16) 8a 00 00 00 00 02 bf db c8 00 00 00 04 00 00 00 [311258.117163] sd 10:0:0:0: [sdg] tag#13 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT [311258.117168] sd 10:0:0:0: [sdg] tag#13 CDB: Write(16) 8a 00 00 00 00 02 bf db a5 30 00 00 02 d0 00 00 [311258.117303] sd 10:0:0:0: [sdg] tag#12 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT [311258.117316] sd 10:0:0:0: [sdg] tag#12 CDB: Write(16) 8a 00 00 00 00 02 bf db a1 30 00 00 04 00 00 00 [311258.144370] scsi host10: uas_eh_device_reset_handler start [311258.225465] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [311258.251574] scsi host10: uas_eh_device_reset_handler success [311290.884131] sd 10:0:0:0: [sdg] tag#13 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT [311290.884143] sd 10:0:0:0: [sdg] tag#13 CDB: Write(16) 8a 00 00 00 00 02 bf e0 65 d8 00 00 02 28 00 00 [311290.884290] sd 10:0:0:0: [sdg] tag#12 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT [311290.884296] sd 10:0:0:0: [sdg] tag#12 CDB: Write(16) 8a 00 00 00 00 02 bf e0 63 20 00 00 02 b8 00 00 [311290.884387] sd 10:0:0:0: [sdg] tag#9 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT [311290.884393] sd 10:0:0:0: [sdg] tag#9 CDB: Write(16) 8a 00 00 00 00 02 bf e0 5f 20 00 00 04 00 00 00 [311290.884487] sd 10:0:0:0: [sdg] tag#8 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT [311290.884492] sd 10:0:0:0: [sdg] tag#8 CDB: Write(16) 8a 00 00 00 00 02 bf e0 5b 20 00 00 04 00 00 00 [311321.603899] sd 10:0:0:0: [sdg] tag#10 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN [311321.603910] sd 10:0:0:0: [sdg] tag#10 CDB: Inquiry 12 00 00 00 60 00 [311321.623968] scsi host10: uas_eh_device_reset_handler start [311321.624195] xhci_hcd 0000:02:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [311321.705209] usb 5-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [311321.731361] scsi host10: uas_eh_device_reset_handler success