Probe #03abb9daf3 of Lenovo ThinkServer TS140 Desktop Computer (70A4000FUX ThinkServer TS140)

Log: dmesg

[ 0.000000] Linux version 5.8.0-1.el7.elrepo.x86_64 (XXX@XXX) (gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), GNU ld version 2.32-16.el7) #1 SMP Sun Aug 2 18:18:16 EDT 2020 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.8.0-1.el7.elrepo.x86_64 root=/dev/mapper/XXXXXXXXXXX ro rd.lvm.lv=... rd.lvm.lv=... rhgb quiet LANG=ko_KR.UTF-8 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2c8bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c2c8c000-0x00000000c2c92fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c2c93000-0x00000000c30dafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c30db000-0x00000000c357cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c357d000-0x00000000d46b8fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d46b9000-0x00000000d474bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d474c000-0x00000000d47adfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d47ae000-0x00000000d54c1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d54c2000-0x00000000d5ffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d5fff000-0x00000000d5ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc2931018-0xc2941057] usable ==> usable [ 0.000000] e820: update [mem 0xc2931018-0xc2941057] usable ==> usable [ 0.000000] e820: update [mem 0xc2921018-0xc2930c57] usable ==> usable [ 0.000000] e820: update [mem 0xc2921018-0xc2930c57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c2921017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c2921018-0x00000000c2930c57] usable [ 0.000000] reserve setup_data: [mem 0x00000000c2930c58-0x00000000c2931017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c2931018-0x00000000c2941057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c2941058-0x00000000c2c8bfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c2c8c000-0x00000000c2c92fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000c2c93000-0x00000000c30dafff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c30db000-0x00000000c357cfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c357d000-0x00000000d46b8fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d46b9000-0x00000000d474bfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d474c000-0x00000000d47adfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000d47ae000-0x00000000d54c1fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000d54c2000-0x00000000d5ffefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d5fff000-0x00000000d5ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d7000000-0x00000000df1fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000011edfffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ESRT=0xd5f60818 ACPI=0xd475f000 ACPI 2.0=0xd475f000 SMBIOS=0xf0480 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO ThinkServer TS140/ThinkServer TS140, BIOS FBKT99AUS 09/19/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3491.810 MHz processor [ 0.000505] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000506] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000511] last_pfn = 0x11ee00 max_arch_pfn = 0x400000000 [ 0.000514] MTRR default type: uncachable [ 0.000515] MTRR fixed ranges enabled: [ 0.000516] 00000-9FFFF write-back [ 0.000517] A0000-BFFFF uncachable [ 0.000517] C0000-D3FFF write-protect [ 0.000518] D4000-E7FFF uncachable [ 0.000518] E8000-FFFFF write-protect [ 0.000519] MTRR variable ranges enabled: [ 0.000520] 0 base 0000000000 mask 7F00000000 write-back [ 0.000520] 1 base 0100000000 mask 7FE0000000 write-back [ 0.000521] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000521] 3 base 00D8000000 mask 7FF8000000 uncachable [ 0.000522] 4 base 00D7000000 mask 7FFF000000 uncachable [ 0.000523] 5 base 011F000000 mask 7FFF000000 uncachable [ 0.000523] 6 base 011EE00000 mask 7FFFE00000 uncachable [ 0.000524] 7 disabled [ 0.000524] 8 disabled [ 0.000524] 9 disabled [ 0.000790] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000899] total RAM covered: 3934M [ 0.001047] Found optimal setting for mtrr clean up [ 0.001048] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G [ 0.001273] e820: update [mem 0xd7000000-0xffffffff] usable ==> reserved [ 0.001275] last_pfn = 0xd6000 max_arch_pfn = 0x400000000 [ 0.006671] found SMP MP-table at [mem 0x000fcd40-0x000fcd4f] [ 0.006678] esrt: Reserving ESRT space from 0x00000000d5f60818 to 0x00000000d5f60850. [ 0.006687] Using GB pages for direct mapping [ 0.007457] Secure boot disabled [ 0.007458] RAMDISK: [mem 0x3e9a6000-0x3fffdfff] [ 0.007462] ACPI: Early table checksum verification disabled [ 0.007464] ACPI: RSDP 0x00000000D475F000 000024 (v02 LENOVO) [ 0.007467] ACPI: XSDT 0x00000000D475F098 0000B4 (v01 LENOVO TC-FB 00001630 AMI 00010013) [ 0.007471] ACPI: FACP 0x00000000D4776990 00010C (v05 LENOVO TC-FB 00001630 AMI 00010013) [ 0.007474] ACPI: DSDT 0x00000000D475F1E0 0177B0 (v02 LENOVO TC-FB 00001630 INTL 20120711) [ 0.007476] ACPI: FACS 0x00000000D54C0F80 000040 [ 0.007477] ACPI: APIC 0x00000000D4776AA0 000072 (v03 LENOVO TC-FB 00001630 AMI 00010013) [ 0.007479] ACPI: FPDT 0x00000000D4776B18 000044 (v01 LENOVO TC-FB 00001630 AMI 00010013) [ 0.007481] ACPI: FIDT 0x00000000D4776B60 00009C (v01 LENOVO TC-FB 00001630 AMI 00010013) [ 0.007482] ACPI: TCPA 0x00000000D4776C00 000032 (v02 LENOVO TC-FB 00001630 MSFT 01000013) [ 0.007484] ACPI: SSDT 0x00000000D4776C38 000539 (v01 LENOVO TC-FB 00001630 INTL 20120711) [ 0.007486] ACPI: SSDT 0x00000000D4777178 000AD8 (v01 LENOVO TC-FB 00001630 INTL 20120711) [ 0.007488] ACPI: MCFG 0x00000000D4777C50 00003C (v01 LENOVO TC-FB 00001630 MSFT 00000097) [ 0.007489] ACPI: HPET 0x00000000D4777C90 000038 (v01 LENOVO TC-FB 00001630 AMI. 00000005) [ 0.007491] ACPI: SSDT 0x00000000D4777CC8 00036D (v01 LENOVO TC-FB 00001630 INTL 20120711) [ 0.007493] ACPI: SSDT 0x00000000D4778038 003528 (v01 LENOVO TC-FB 00001630 INTL 20091112) [ 0.007494] ACPI: ASF! 0x00000000D477B560 0000A5 (v32 LENOVO TC-FB 00001630 TFSM 000F4240) [ 0.007496] ACPI: LUFT 0x00000000D477B608 032000 (v01 LENOVO TC-FB 00001630 AMI 00010013) [ 0.007498] ACPI: EINJ 0x00000000D47AD608 000130 (v01 LENOVO TC-FB 00001630 00000000) [ 0.007500] ACPI: ERST 0x00000000D47AD738 000230 (v01 LENOVO TC-FB 00001630 00000000) [ 0.007501] ACPI: HEST 0x00000000D47AD968 0000A8 (v01 LENOVO TC-FB 00001630 00000000) [ 0.007503] ACPI: BERT 0x00000000D47ADA10 000030 (v01 LENOVO TC-FB 00001630 00000000) [ 0.007504] ACPI: BGRT 0x00000000D47ADA40 000038 (v00 LENOVO TC-FB 00001630 AMI 00010013) [ 0.007510] ACPI: Local APIC address 0xfee00000 [ 0.007579] No NUMA configuration found [ 0.007580] Faking a node at [mem 0x0000000000000000-0x000000011edfffff] [ 0.007588] NODE_DATA(0) allocated [mem 0x11edd2000-0x11edfbfff] [ 0.007799] Zone ranges: [ 0.007800] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007801] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.007801] Normal [mem 0x0000000100000000-0x000000011edfffff] [ 0.007802] Device empty [ 0.007802] Movable zone start for each node [ 0.007805] Early memory node ranges [ 0.007805] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.007806] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.007807] node 0: [mem 0x0000000000100000-0x00000000c2c8bfff] [ 0.007807] node 0: [mem 0x00000000c2c93000-0x00000000c30dafff] [ 0.007808] node 0: [mem 0x00000000c357d000-0x00000000d46b8fff] [ 0.007808] node 0: [mem 0x00000000d5fff000-0x00000000d5ffffff] [ 0.007808] node 0: [mem 0x0000000100000000-0x000000011edfffff] [ 0.008048] Zeroed struct page in unavailable ranges: 20562 pages [ 0.008048] Initmem setup node 0 [mem 0x0000000000001000-0x000000011edfffff] [ 0.008050] On node 0 totalpages: 995246 [ 0.008050] DMA zone: 64 pages used for memmap [ 0.008051] DMA zone: 280 pages reserved [ 0.008051] DMA zone: 3997 pages, LIFO batch:0 [ 0.008099] DMA32 zone: 13513 pages used for memmap [ 0.008099] DMA32 zone: 864785 pages, LIFO batch:63 [ 0.018884] Normal zone: 1976 pages used for memmap [ 0.018886] Normal zone: 126464 pages, LIFO batch:31 [ 0.020483] Reserving Intel graphics memory at [mem 0xd7200000-0xdf1fffff] [ 0.020591] ACPI: PM-Timer IO Port: 0x1808 [ 0.020593] ACPI: Local APIC address 0xfee00000 [ 0.020598] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.020607] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.020609] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.020610] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.020611] ACPI: IRQ0 used by override. [ 0.020611] ACPI: IRQ9 used by override. [ 0.020612] Using ACPI (MADT) for SMP configuration information [ 0.020613] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.020621] e820: update [mem 0xc8ace000-0xc8b15fff] usable ==> reserved [ 0.020629] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later) [ 0.020631] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.020649] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.020650] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.020651] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.020652] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.020653] PM: hibernation: Registered nosave memory: [mem 0xc2921000-0xc2921fff] [ 0.020654] PM: hibernation: Registered nosave memory: [mem 0xc2930000-0xc2930fff] [ 0.020655] PM: hibernation: Registered nosave memory: [mem 0xc2931000-0xc2931fff] [ 0.020656] PM: hibernation: Registered nosave memory: [mem 0xc2941000-0xc2941fff] [ 0.020657] PM: hibernation: Registered nosave memory: [mem 0xc2c8c000-0xc2c92fff] [ 0.020658] PM: hibernation: Registered nosave memory: [mem 0xc30db000-0xc357cfff] [ 0.020659] PM: hibernation: Registered nosave memory: [mem 0xc8ace000-0xc8b15fff] [ 0.020661] PM: hibernation: Registered nosave memory: [mem 0xd46b9000-0xd474bfff] [ 0.020661] PM: hibernation: Registered nosave memory: [mem 0xd474c000-0xd47adfff] [ 0.020661] PM: hibernation: Registered nosave memory: [mem 0xd47ae000-0xd54c1fff] [ 0.020662] PM: hibernation: Registered nosave memory: [mem 0xd54c2000-0xd5ffefff] [ 0.020663] PM: hibernation: Registered nosave memory: [mem 0xd6000000-0xd6ffffff] [ 0.020663] PM: hibernation: Registered nosave memory: [mem 0xd7000000-0xdf1fffff] [ 0.020664] PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.020664] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.020665] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.020665] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.020665] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.020666] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.020666] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.020666] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.020667] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.020667] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.020668] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.020668] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.020669] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.020670] Booting paravirtualized kernel on bare hardware [ 0.020673] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.020677] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.020934] percpu: Embedded 55 pages/cpu s185240 r8192 d31848 u524288 [ 0.020939] pcpu-alloc: s185240 r8192 d31848 u524288 alloc=1*2097152 [ 0.020939] pcpu-alloc: [0] 0 1 2 3 [ 0.020965] Built 1 zonelists, mobility grouping on. Total pages: 979413 [ 0.020966] Policy zone: Normal [ 0.020967] Kernel command line: BOOT_IMAGE=/vmlinuz-5.8.0-1.el7.elrepo.x86_64 root=/dev/mapper/XXXXXXXXXXX ro rd.lvm.lv=... rd.lvm.lv=... rhgb quiet LANG=ko_KR.UTF-8 [ 0.021396] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.021577] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.021612] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.041191] Memory: 3572928K/3980984K available (12291K kernel code, 2224K rwdata, 4312K rodata, 2380K init, 3472K bss, 408056K reserved, 0K cma-reserved) [ 0.041227] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.041236] Kernel/User page tables isolation: enabled [ 0.041249] ftrace: allocating 39758 entries in 156 pages [ 0.051952] ftrace: allocated 156 pages with 4 groups [ 0.052034] rcu: Hierarchical RCU implementation. [ 0.052035] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.052036] Rude variant of Tasks RCU enabled. [ 0.052036] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.052037] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.054320] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.054537] random: get_random_bytes called from start_kernel+0x37b/0x555 with crng_init=0 [ 0.054553] Console: colour dummy device 80x25 [ 0.054561] printk: console [tty0] enabled [ 0.054571] ACPI: Core revision 20200528 [ 0.054780] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.054792] APIC: Switch to symmetric I/O mode setup [ 0.055130] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.059793] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32551891795, max_idle_ns: 440795319136 ns [ 0.059795] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.62 BogoMIPS (lpj=3491810) [ 0.059797] pid_max: default: 32768 minimum: 301 [ 0.064813] LSM: Security Framework initializing [ 0.064820] SELinux: Initializing. [ 0.064858] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.064868] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.065047] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.065062] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.065070] process: using mwait in idle threads [ 0.065072] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.065073] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.065076] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.065077] Spectre V2 : Mitigation: Full generic retpoline [ 0.065077] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.065078] Speculative Store Bypass: Vulnerable [ 0.065080] SRBDS: Vulnerable: No microcode [ 0.065080] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.065181] Freeing SMP alternatives memory: 32K [ 0.169842] smpboot: CPU0: Intel(R) Core(TM) i3-4330 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.169907] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.169920] ... version: 3 [ 0.169920] ... bit width: 48 [ 0.169920] ... generic registers: 4 [ 0.169921] ... value mask: 0000ffffffffffff [ 0.169921] ... max period: 00007fffffffffff [ 0.169922] ... fixed-purpose events: 3 [ 0.169922] ... event mask: 000000070000000f [ 0.169950] rcu: Hierarchical SRCU implementation. [ 0.170519] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.170550] smp: Bringing up secondary CPUs ... [ 0.170598] x86: Booting SMP configuration: [ 0.170599] .... node #0, CPUs: #1 #2 [ 0.171179] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.171179] #3 [ 0.171851] smp: Brought up 1 node, 4 CPUs [ 0.171851] smpboot: Max logical packages: 1 [ 0.171851] smpboot: Total of 4 processors activated (27934.48 BogoMIPS) [ 0.172940] devtmpfs: initialized [ 0.172940] x86/mm: Memory block size: 128MB [ 0.173073] PM: Registering ACPI NVS region [mem 0xc2c8c000-0xc2c92fff] (28672 bytes) [ 0.173073] PM: Registering ACPI NVS region [mem 0xd47ae000-0xd54c1fff] (13713408 bytes) [ 0.173073] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.173073] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.173073] pinctrl core: initialized pinctrl subsystem [ 0.173073] thermal_sys: Registered thermal governor 'fair_share' [ 0.173073] thermal_sys: Registered thermal governor 'bang_bang' [ 0.173073] thermal_sys: Registered thermal governor 'step_wise' [ 0.173073] thermal_sys: Registered thermal governor 'user_space' [ 0.173073] NET: Registered protocol family 16 [ 0.173862] cpuidle: using governor menu [ 0.173862] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.173862] ACPI: bus type PCI registered [ 0.173862] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.173893] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.173895] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.173901] PCI: Using configuration type 1 for base access [ 0.173925] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.174009] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.174998] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.174998] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.378920] fbcon: Taking over console [ 0.378920] ACPI: Added _OSI(Module Device) [ 0.378920] ACPI: Added _OSI(Processor Device) [ 0.378920] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.378920] ACPI: Added _OSI(Processor Aggregator Device) [ 0.378920] ACPI: Added _OSI(Linux-Dell-Video) [ 0.378920] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.378920] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.388598] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.389644] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.390217] ACPI: Dynamic OEM Table Load: [ 0.390221] ACPI: SSDT 0xFFFF88811997CC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.390820] ACPI: Dynamic OEM Table Load: [ 0.390823] ACPI: SSDT 0xFFFF88811A03F800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.391441] ACPI: Dynamic OEM Table Load: [ 0.391443] ACPI: SSDT 0xFFFF88811A3F7A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.392827] ACPI: Interpreter enabled [ 0.392844] ACPI: (supports S0 S5) [ 0.392844] ACPI: Using IOAPIC for interrupt routing [ 0.392881] HEST: Table parsing has been initialized. [ 0.392883] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.393268] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.399585] ACPI: Power Resource [FN00] (off) [ 0.399629] ACPI: Power Resource [FN01] (off) [ 0.399672] ACPI: Power Resource [FN02] (off) [ 0.399713] ACPI: Power Resource [FN03] (off) [ 0.399754] ACPI: Power Resource [FN04] (off) [ 0.400439] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.400443] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.400595] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.400678] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.400679] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.400941] PCI host bridge to bus 0000:00 [ 0.400943] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.400943] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.400944] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.400945] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.400946] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.400946] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.400947] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.400948] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.400948] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.400949] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.400956] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.401020] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.401028] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.401032] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.401035] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.401043] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.401099] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.401105] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit] [ 0.401188] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.401205] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.401255] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.401314] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.401334] pci 0000:00:16.0: reg 0x10: [mem 0xf7d40000-0xf7d4000f 64bit] [ 0.401386] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.401435] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.401450] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.401457] pci 0000:00:16.3: reg 0x14: [mem 0xf7d3e000-0xf7d3efff] [ 0.401558] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.401573] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff] [ 0.401580] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3d000-0xf7d3dfff] [ 0.401587] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.401635] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.401694] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.401712] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c3ff] [ 0.401784] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.401849] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.401866] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit] [ 0.401927] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.401984] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.402052] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.402142] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.402210] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.402297] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.402366] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.402455] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.402475] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff] [ 0.402547] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.402614] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 [ 0.402760] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.402775] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.402781] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.402787] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.402792] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.402801] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.402807] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d3a000-0xf7d3a7ff] [ 0.402837] pci 0000:00:1f.2: PME# supported from D3hot [ 0.402891] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.402906] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d39000-0xf7d390ff 64bit] [ 0.402923] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 0.403027] acpiphp: Slot [1] registered [ 0.403032] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.403079] acpiphp: Slot [1-1] registered [ 0.403119] pci 0000:02:00.0: [8086:2723] type 00 class 0x028000 [ 0.403162] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.403519] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.403666] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.403670] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.403755] pci 0000:03:00.0: [1283:8893] type 01 class 0x060401 [ 0.404163] pci 0000:03:00.0: supports D1 D2 [ 0.404163] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.404264] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.404318] pci_bus 0000:04: extended config space not accessible [ 0.404407] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode) [ 0.405051] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.405083] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.405113] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.405145] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.405174] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.405204] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.405234] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.405263] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.405614] iommu: Default domain type: Translated [ 0.405624] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.405624] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.405624] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.405624] vgaarb: loaded [ 0.405624] SCSI subsystem initialized [ 0.405624] ACPI: bus type USB registered [ 0.405624] usbcore: registered new interface driver usbfs [ 0.405624] usbcore: registered new interface driver hub [ 0.405624] usbcore: registered new device driver usb [ 0.405798] EDAC MC: Ver: 3.0.0 [ 0.405809] Registered efivars operations [ 0.405890] NetLabel: Initializing [ 0.405891] NetLabel: domain hash size = 128 [ 0.405891] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.405900] NetLabel: unlabeled traffic allowed by default [ 0.405900] PCI: Using ACPI for IRQ routing [ 0.407349] PCI: pci_cache_line_size set to 64 bytes [ 0.407404] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.407405] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.407405] e820: reserve RAM buffer [mem 0xc2921018-0xc3ffffff] [ 0.407406] e820: reserve RAM buffer [mem 0xc2931018-0xc3ffffff] [ 0.407407] e820: reserve RAM buffer [mem 0xc2c8c000-0xc3ffffff] [ 0.407407] e820: reserve RAM buffer [mem 0xc30db000-0xc3ffffff] [ 0.407408] e820: reserve RAM buffer [mem 0xc8ace000-0xcbffffff] [ 0.407408] e820: reserve RAM buffer [mem 0xd46b9000-0xd7ffffff] [ 0.407409] e820: reserve RAM buffer [mem 0xd6000000-0xd7ffffff] [ 0.407410] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff] [ 0.407413] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.407413] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.408807] clocksource: Switched to clocksource tsc-early [ 0.417782] VFS: Disk quotas dquot_6.6.0 [ 0.417792] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.417848] pnp: PnP ACPI init [ 0.417937] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.417941] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.418057] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.418058] system 00:01: [io 0xffff] has been reserved [ 0.418059] system 00:01: [io 0xffff] has been reserved [ 0.418059] system 00:01: [io 0xffff] has been reserved [ 0.418060] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.418061] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.418063] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.418063] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.418064] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.418065] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.418067] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.418083] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.418116] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.418118] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.418202] system 00:04: [io 0x0a00-0x0a2f] has been reserved [ 0.418203] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.418203] system 00:04: [io 0x0a40-0x0a4f] has been reserved [ 0.418205] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.418258] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.418259] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.418261] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.418386] pnp 00:06: [dma 0 disabled] [ 0.418411] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.418855] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.418856] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.418856] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.418857] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.418858] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.418859] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.418860] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.418861] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.418862] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.418862] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.418863] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.418864] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.418866] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.419094] pnp: PnP ACPI: found 8 devices [ 0.424606] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.424626] NET: Registered protocol family 2 [ 0.424710] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.424718] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.424764] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.424853] TCP: Hash tables configured (established 32768 bind 32768) [ 0.424872] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.424884] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.424919] NET: Registered protocol family 1 [ 0.424926] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.424928] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.424936] pci 0000:00:1c.1: BAR 15: assigned [mem 0xdf200000-0xdf3fffff 64bit pref] [ 0.424938] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.424939] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.424948] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.424950] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.424954] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.424957] pci 0000:00:1c.1: bridge window [mem 0xdf200000-0xdf3fffff 64bit pref] [ 0.424961] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.424983] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.424992] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.424992] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.424993] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.424994] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window] [ 0.424994] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window] [ 0.424995] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window] [ 0.424996] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window] [ 0.424996] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window] [ 0.424997] pci_bus 0000:00: resource 12 [mem 0xdf200000-0xfeafffff window] [ 0.424998] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.424999] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.425000] pci_bus 0000:02: resource 2 [mem 0xdf200000-0xdf3fffff 64bit pref] [ 0.425055] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.441157] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 15586 usecs [ 0.457152] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 15608 usecs [ 0.457176] PCI: CLS 64 bytes, default 64 [ 0.457200] Trying to unpack rootfs image as initramfs... [ 0.681568] Freeing initrd memory: 22880K [ 0.681593] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.681594] software IO TLB: mapped [mem 0xbe921000-0xc2921000] (64MB) [ 0.681961] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x300000 bytes, mapped to 0x00000000174917ca [ 0.681962] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096 [ 0.682013] Console: switching to colour frame buffer device 128x48 [ 0.683240] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 0.683448] Initialise system trusted keyrings [ 0.683487] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.684399] zbud: loaded [ 0.692624] NET: Registered protocol family 38 [ 0.692627] Key type asymmetric registered [ 0.692627] Asymmetric key parser 'x509' registered [ 0.692632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.692656] io scheduler mq-deadline registered [ 0.692657] io scheduler kyber registered [ 0.692673] io scheduler bfq registered [ 0.693079] intel_idle: MWAIT substates: 0x42120 [ 0.693080] intel_idle: v0.5.1 model 0x3C [ 0.693198] intel_idle: Local APIC timer is reliable in all C-states [ 0.693296] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.693322] ACPI: Power Button [PWRB] [ 0.693344] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.693358] ACPI: Power Button [PWRF] [ 0.693757] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.693758] ACPI: Thermal Zone [TZ00] (28 C) [ 0.693886] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.693887] ACPI: Thermal Zone [TZ01] (30 C) [ 0.693929] ERST: Error Record Serialization Table (ERST) support is initialized. [ 0.693930] pstore: Registered erst as persistent store backend [ 0.693972] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 0.694020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.694104] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.694348] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.694537] Non-volatile memory driver v1.3 [ 0.694552] Linux agpgart interface v0.103 [ 0.694825] rdac: device handler registered [ 0.694857] hp_sw: device handler registered [ 0.694858] emc: device handler registered [ 0.694897] alua: device handler registered [ 0.694968] libphy: Fixed MDIO Bus: probed [ 0.695010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.695012] ehci-pci: EHCI PCI platform driver [ 0.695079] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.695104] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.695113] ehci-pci 0000:00:1a.0: debug port 2 [ 0.699007] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.699016] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7d3c000 [ 0.706049] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.706093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.706094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.706095] usb usb1: Product: EHCI Host Controller [ 0.706096] usb usb1: Manufacturer: Linux 5.8.0-1.el7.elrepo.x86_64 ehci_hcd [ 0.706096] usb usb1: SerialNumber: ... [ 0.706265] hub 1-0:1.0: USB hub found [ 0.706269] hub 1-0:1.0: 3 ports detected [ 0.706470] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.706535] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.706545] ehci-pci 0000:00:1d.0: debug port 2 [ 0.710451] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.710460] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3b000 [ 0.717048] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.717108] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.717109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.717110] usb usb2: Product: EHCI Host Controller [ 0.717111] usb usb2: Manufacturer: Linux 5.8.0-1.el7.elrepo.x86_64 ehci_hcd [ 0.717112] usb usb2: SerialNumber: ... [ 0.717278] hub 2-0:1.0: USB hub found [ 0.717282] hub 2-0:1.0: 3 ports detected [ 0.717403] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.717406] ohci-pci: OHCI PCI platform driver [ 0.717414] uhci_hcd: USB Universal Host Controller Interface driver [ 0.717512] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.717612] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.718662] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.718667] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.718792] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.718793] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.718794] usb usb3: Product: xHCI Host Controller [ 0.718795] usb usb3: Manufacturer: Linux 5.8.0-1.el7.elrepo.x86_64 xhci-hcd [ 0.718795] usb usb3: SerialNumber: ... [ 0.718933] hub 3-0:1.0: USB hub found [ 0.718948] hub 3-0:1.0: 15 ports detected [ 0.720582] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.720676] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.720679] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.720707] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 0.720708] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.720709] usb usb4: Product: xHCI Host Controller [ 0.720710] usb usb4: Manufacturer: Linux 5.8.0-1.el7.elrepo.x86_64 xhci-hcd [ 0.720710] usb usb4: SerialNumber: ... [ 0.720848] hub 4-0:1.0: USB hub found [ 0.720858] hub 4-0:1.0: 6 ports detected [ 0.721310] usbcore: registered new interface driver usbserial_generic [ 0.721313] usbserial: USB Serial support registered for generic [ 0.721317] usbcore: registered new interface driver wishbone_serial [ 0.721319] usbserial: USB Serial support registered for wishbone_serial [ 0.721334] i8042: PNP: No PS/2 controller found. [ 0.721405] mousedev: PS/2 mouse device common for all mice [ 0.721532] rtc_cmos 00:02: RTC can wake from S4 [ 0.721691] rtc_cmos 00:02: registered as rtc0 [ 0.721726] rtc_cmos 00:02: setting system clock to 2020-08-11T13:12:34 UTC (1597151554) [ 0.721738] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.721745] intel_pstate: Intel P-state driver initializing [ 0.721937] ledtrig-cpu: registered to indicate activity on CPUs [ 0.722209] EFI Variables Facility v0.08 2004-May-17 [ 0.728814] hid: raw HID events driver (C) Jiri Kosina [ 0.728870] usbcore: registered new interface driver usbhid [ 0.728870] usbhid: USB HID core driver [ 0.728885] drop_monitor: Initializing network drop monitor service [ 0.728928] Initializing XFRM netlink socket [ 0.729000] NET: Registered protocol family 10 [ 0.729138] Segment Routing with IPv6 [ 0.729149] NET: Registered protocol family 17 [ 0.729157] Bridge firewalling registered [ 0.729338] microcode: sig=0x306c3, pf=0x2, revision=0x1c [ 0.729360] microcode: Microcode Update Driver: v2.2. [ 0.729363] IPI shorthand broadcast: enabled [ 0.729368] sched_clock: Marking stable (729071697, 286055)->(730167546, -809794) [ 0.729417] registered taskstats version 1 [ 0.729420] Loading compiled-in X.509 certificates [ 0.729433] zswap: loaded using pool lzo/zbud [ 0.731082] pstore: Unknown compression: deflate [ 0.732281] Key type encrypted registered [ 0.732286] ima: No TPM chip found, activating TPM-bypass! [ 0.732290] ima: Allocated hash algorithm: sha1 [ 0.732304] ima: No architecture policies found [ 0.732311] evm: Initialising EVM extended attributes: [ 0.732312] evm: security.selinux [ 0.732312] evm: security.ima [ 0.732313] evm: security.capability [ 0.732314] evm: HMAC attrs: 0x1 [ 0.733718] Freeing unused kernel image (initmem) memory: 2380K [ 0.736604] Write protecting the kernel read-only data: 20480k [ 0.737796] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 0.738596] Freeing unused kernel image (rodata/data gap) memory: 1832K [ 0.738668] Run /init as init process [ 0.738671] with arguments: [ 0.738673] /init [ 0.738674] rhgb [ 0.738676] with environment: [ 0.738677] HOME=/ [ 0.738679] TERM=linux [ 0.738680] BOOT_IMAGE=/vmlinuz-5.8.0-1.el7.elrepo.x86_64 [ 0.738682] LANG=ko_KR.UTF-8 [ 0.755390] random: systemd: uninitialized urandom read (16 bytes read) [ 0.755581] random: systemd: uninitialized urandom read (16 bytes read) [ 0.755588] random: systemd: uninitialized urandom read (16 bytes read) [ 0.759978] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 0.760125] systemd[1]: Detected architecture x86-64. [ 0.760126] systemd[1]: Running in initial RAM disk. [ 0.760145] systemd[1]: Set hostname to ... [ 0.782553] systemd[1]: Reached target Local File Systems. [ 0.782584] systemd[1]: Reached target Timers. [ 0.782754] systemd[1]: Created slice Root Slice. [ 0.782781] systemd[1]: Listening on udev Control Socket. [ 0.782811] systemd[1]: Listening on Journal Socket. [ 0.782820] systemd[1]: Reached target Swap. [ 0.869531] device-mapper: uevent: version 1.0.3 [ 0.869585] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: XXX@XXX [ 1.030002] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.038000] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.045992] usb 3-4: new full-speed USB device number 2 using xhci_hcd [ 1.053420] checking generic (e0000000 300000) vs hw (f7800000 400000) [ 1.053422] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 1.053423] fb0: switching to inteldrmfb from simple [ 1.053999] Console: switching to colour dummy device 80x25 [ 1.054033] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.056784] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.057590] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.066256] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0 [ 1.068798] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.069897] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 1.146994] pps_core: LinuxPPS API ver. 1 registered [ 1.146996] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 1.147354] PTP clock support registered [ 1.148836] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.148837] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.149014] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.152197] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 1.152199] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.152352] hub 1-1:1.0: USB hub found [ 1.152443] hub 1-1:1.0: 6 ports detected [ 1.160199] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 1.160202] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.160599] hub 2-1:1.0: USB hub found [ 1.160694] hub 2-1:1.0: 8 ports detected [ 1.166323] libata version 3.00 loaded. [ 1.166656] usb 3-4: New USB device found, idVendor=0483, idProduct=5131, bcdDevice= 0.00 [ 1.166658] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.166660] usb 3-4: Product: GK893B [ 1.166661] usb 3-4: Manufacturer: CATEX TECH. [ 1.166662] usb 3-4: SerialNumber: ... [ 1.167198] ahci 0000:00:1f.2: version 3.0 [ 1.167392] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x19 impl SATA mode [ 1.167394] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.168504] input: CATEX TECH. GK893B as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:0483:5131.0001/input/input3 [ 1.177228] scsi host0: ahci [ 1.177377] scsi host1: ahci [ 1.187820] scsi host2: ahci [ 1.191006] scsi host3: ahci [ 1.198113] random: fast init done [ 1.201679] scsi host4: ahci [ 1.201753] ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 30 [ 1.201754] ata2: DUMMY [ 1.201755] ata3: DUMMY [ 1.201758] ata4: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a280 irq 30 [ 1.201760] ata5: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a300 irq 30 [ 1.219892] hid-generic 0003:0483:5131.0001: input,hidraw0: USB HID v1.10 Keyboard [CATEX TECH. GK893B] on usb-0000:00:14.0-4/input0 [ 1.220540] hid-generic 0003:0483:5131.0002: hiddev96,hidraw1: USB HID v1.00 Device [CATEX TECH. GK893B] on usb-0000:00:14.0-4/input1 [ 1.221710] input: CATEX TECH. GK893B Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:0483:5131.0003/input/input4 [ 1.221738] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.272948] input: CATEX TECH. GK893B System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:0483:5131.0003/input/input5 [ 1.273026] input: CATEX TECH. GK893B Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:0483:5131.0003/input/input6 [ 1.273126] input: CATEX TECH. GK893B Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:0483:5131.0003/input/input7 [ 1.273265] hid-generic 0003:0483:5131.0003: input,hidraw2: USB HID v1.10 Keyboard [CATEX TECH. GK893B] on usb-0000:00:14.0-4/input2 [ 1.274141] fbcon: i915drmfb (fb0) is primary device [ 1.287041] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 1.287043] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.287093] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.293160] Console: switching to colour frame buffer device 200x75 [ 1.303645] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.312757] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 1.386817] usb 3-5: new full-speed USB device number 3 using xhci_hcd [ 1.514127] usb 3-5: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01 [ 1.514132] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.515998] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.516171] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.516195] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.517038] ata5.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 1.517041] ata5.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 1.517044] ata5.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.517701] ata5.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133 [ 1.517704] ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.517837] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 1.517901] ata1.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133 [ 1.517902] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.518626] ata5.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 1.518629] ata5.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 1.518631] ata5.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.518785] ata1.00: configured for UDMA/133 [ 1.518956] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-0 0K05 PQ: 0 ANSI: 5 [ 1.519134] ata5.00: configured for UDMA/133 [ 1.519649] ata4.00: ATA-9: HGST HDN726060ALE610, APGNT517, max UDMA/133 [ 1.519650] ata4.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.527755] ata4.00: configured for UDMA/133 [ 1.527992] scsi 3:0:0:0: Direct-Access ATA HGST HDN726060AL T517 PQ: 0 ANSI: 5 [ 1.528457] scsi 4:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5 [ 1.552473] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.552483] sd 0:0:0:0: [sda] Write Protect is off [ 1.552484] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.552495] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.552790] sd 3:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 1.552792] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 1.553343] sd 3:0:0:0: [sdb] Write Protect is off [ 1.553345] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.553361] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.553628] sd 4:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 1.553630] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 1.553637] sd 4:0:0:0: [sdc] Write Protect is off [ 1.553638] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.553649] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.602595] sda: sda1 sda2 sda3 [ 1.602629] sdb: sdb1 [ 1.602921] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.602921] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.628346] sdc: sdc1 sdc2 [ 1.628607] sd 4:0:0:0: [sdc] Attached SCSI disk [ 1.629819] usb 3-10: new full-speed USB device number 4 using xhci_hcd [ 1.685803] tsc: Refined TSC clocksource calibration: 3491.913 MHz [ 1.685807] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255790e5ea, max_idle_ns: 440795224414 ns [ 1.685817] clocksource: Switched to clocksource tsc [ 1.814823] random: crng init done [ 1.814825] random: 7 urandom warning(s) missed due to ratelimiting [ 17.233913] usb 3-10: device descriptor read/64, error -110 [ 17.468824] usb 3-10: New USB device found, idVendor=8054, idProduct=0001, bcdDevice= 1.00 [ 17.468829] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 17.468832] usb 3-10: Product: KVM PORT SWITCH [ 17.468834] usb 3-10: Manufacturer: ROCLA [ 17.469710] hub 3-10:1.0: USB hub found [ 17.469828] hub 3-10:1.0: 4 ports detected [ 17.741830] usb 3-10.3: new low-speed USB device number 5 using xhci_hcd [ 17.822789] usb 3-10.3: New USB device found, idVendor=058f, idProduct=9410, bcdDevice= 1.22 [ 17.822791] usb 3-10.3: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 17.822792] usb 3-10.3: Product: USB Multimedia Keyboard [ 17.822793] usb 3-10.3: SerialNumber: ... [ 17.826601] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.0/0003:058F:9410.0004/input/input8 [ 17.878239] hid-generic 0003:058F:9410.0004: input,hidraw3: USB HID v1.10 Keyboard [USB Multimedia Keyboard] on usb-0000:00:14.0-10.3/input0 [ 17.881592] input: USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.1/0003:058F:9410.0005/input/input9 [ 17.933030] input: USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.1/0003:058F:9410.0005/input/input10 [ 17.933179] hid-generic 0003:058F:9410.0005: input,hidraw4: USB HID v1.10 Device [USB Multimedia Keyboard] on usb-0000:00:14.0-10.3/input1 [ 17.988403] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 17.989437] XFS (dm-0): Mounting V5 Filesystem [ 18.143158] XFS (dm-0): Ending clean mount [ 18.478790] systemd-journald[145]: Received SIGTERM from PID 1 (systemd). [ 18.564593] printk: systemd: 14 output lines suppressed due to ratelimiting [ 18.885927] SELinux: Runtime disable is deprecated, use selinux=0 on the kernel cmdline. [ 18.885929] SELinux: Disabled at runtime. [ 19.142180] systemd[1]: Inserted module 'ip_tables' [ 21.004246] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 21.207356] systemd-journald[2204]: Received request to flush runtime journal from PID 1 [ 22.521123] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200528/utaddress-204) [ 22.521152] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.521175] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204) [ 22.521178] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.521179] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20200528/utaddress-204) [ 22.521182] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200528/utaddress-204) [ 22.521185] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204) [ 22.521187] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.521188] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20200528/utaddress-204) [ 22.521191] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C1F (\GPBL) (20200528/utaddress-204) [ 22.521193] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200528/utaddress-204) [ 22.521196] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204) [ 22.521199] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.521199] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 22.777184] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.805320] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.865036] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 22.865039] cfg80211: failed to load regulatory.db [ 22.883783] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 22.898891] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.898923] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 22.898952] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 22.977595] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 22.977597] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 22.977598] RAPL PMU: hw unit of domain package 2^-14 Joules [ 22.977598] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 22.977599] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 23.013091] Bluetooth: Core ver 2.22 [ 23.013108] NET: Registered protocol family 31 [ 23.013109] Bluetooth: HCI device and connection manager initialized [ 23.013112] Bluetooth: HCI socket layer initialized [ 23.013114] Bluetooth: L2CAP socket layer initialized [ 23.013117] Bluetooth: SCO socket layer initialized [ 23.099250] Intel(R) Wireless WiFi driver for Linux [ 23.102314] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-56.ucode failed with error -2 [ 23.102325] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-55.ucode failed with error -2 [ 23.102330] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-54.ucode failed with error -2 [ 23.102335] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-53.ucode failed with error -2 [ 23.102342] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-52.ucode failed with error -2 [ 23.102347] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-51.ucode failed with error -2 [ 23.102352] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2 [ 23.102358] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2 [ 23.102364] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-48.ucode failed with error -2 [ 23.102370] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-47.ucode failed with error -2 [ 23.117061] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 23.117672] i2c i2c-8: 1/4 memory slots populated (from DMI) [ 23.118143] i2c i2c-8: Successfully instantiated SPD at 0x51 [ 23.178545] cryptd: max_cpu_qlen set to 1000 [ 23.210282] iwlwifi 0000:02:00.0: loaded firmware version 46.3cfab8da.0 cc-a0-46.ucode op_mode iwlmvm [ 23.210299] iwlwifi 0000:02:00.0: Direct firmware load for iwl-debug-yoyo.bin failed with error -2 [ 23.285190] AVX2 version of gcm_enc/dec engaged. [ 23.285191] AES CTR mode by8 optimization enabled [ 23.331103] usbcore: registered new interface driver btusb [ 23.332075] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 23.333093] Bluetooth: hci0: Device revision is 1 [ 23.333094] Bluetooth: hci0: Secure boot is enabled [ 23.333094] Bluetooth: hci0: OTP lock is enabled [ 23.333095] Bluetooth: hci0: API lock is enabled [ 23.333096] Bluetooth: hci0: Debug lock is disabled [ 23.333097] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 23.366904] iTCO_vendor_support: vendor-support=0 [ 23.367484] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 23.367529] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 23.367609] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.417738] bluetooth hci0: Direct firmware load for intel/ibt-20-1-3.sfi failed with error -2 [ 23.417741] Bluetooth: hci0: Failed to load Intel firmware file (-2) [ 23.550557] at24 8-0051: supply vcc not found, using dummy regulator [ 23.551100] at24 8-0051: 256 byte spd EEPROM, read-only [ 23.672041] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340 [ 23.733382] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 23.830879] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 23.830929] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 23.830975] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 23.831019] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 23.833597] iwlwifi 0000:02:00.0: base HW address: XX:XX:XX:XX:XX:XX [ 23.846324] thermal thermal_zone2: failed to read out thermal zone (-61) [ 23.849861] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 23.935167] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 23.935169] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.935171] snd_hda_codec_realtek hdaudioC1D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.935172] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 23.935173] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 23.935174] snd_hda_codec_realtek hdaudioC1D2: Mic=0x18 [ 23.935175] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 23.944848] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 23.944898] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 23.945078] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 25.204866] Adding 3932156k swap on /dev/mapper/XXXXXXXXXXXX Priority:-2 extents:1 across:3932156k FS [ 25.295024] XFS (sda2): Mounting V5 Filesystem [ 25.680051] fuse: init (API version 7.31) [ 25.786657] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 26.531805] XFS (sda2): Ending clean mount [ 26.531831] xfs filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 27.115319] XFS (dm-2): Mounting V5 Filesystem [ 27.295649] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 28.556833] XFS (dm-2): Ending clean mount [ 28.556858] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff) [ 28.675449] RPC: Registered named UNIX socket transport module. [ 28.675450] RPC: Registered udp transport module. [ 28.675450] RPC: Registered tcp transport module. [ 28.675451] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 30.011758] xfs filesystem being remounted at /tmp supports timestamps until 2038 (0x7fffffff) [ 30.012132] xfs filesystem being remounted at /var/tmp supports timestamps until 2038 (0x7fffffff) [ 30.872130] xfs filesystem being remounted at /tmp supports timestamps until 2038 (0x7fffffff) [ 30.872462] xfs filesystem being remounted at /var/tmp supports timestamps until 2038 (0x7fffffff) [ 32.284053] xfs filesystem being remounted at /tmp supports timestamps until 2038 (0x7fffffff) [ 32.284434] xfs filesystem being remounted at /var/tmp supports timestamps until 2038 (0x7fffffff) [ 36.848214] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 36.848272] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 37.416872] xfs filesystem being remounted at /tmp supports timestamps until 2038 (0x7fffffff) [ 37.417203] xfs filesystem being remounted at /var/tmp supports timestamps until 2038 (0x7fffffff) [ 37.422650] xfs filesystem being remounted at /tmp supports timestamps until 2038 (0x7fffffff) [ 37.423097] xfs filesystem being remounted at /var/tmp supports timestamps until 2038 (0x7fffffff) [ 42.573056] xfs filesystem being remounted at /tmp supports timestamps until 2038 (0x7fffffff) [ 42.573680] xfs filesystem being remounted at /var/tmp supports timestamps until 2038 (0x7fffffff) [ 44.352415] usb 3-3: new high-speed USB device number 6 using xhci_hcd [ 44.486944] usb 3-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63 [ 44.486947] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 44.486948] usb 3-3: Product: USB2.0 Hub [ 44.487786] hub 3-3:1.0: USB hub found [ 44.488029] hub 3-3:1.0: 4 ports detected [ 44.773602] usb 3-3.1: new low-speed USB device number 7 using xhci_hcd [ 44.878324] usb 3-3.1: New USB device found, idVendor=04d9, idProduct=4250, bcdDevice= 1.00 [ 44.878326] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 44.878327] usb 3-3.1: Product: USB Keyboard + 3P HUB [ 44.878328] usb 3-3.1: Manufacturer: [ 44.894110] input: USB Keyboard + 3P HUB as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/0003:04D9:4250.0006/input/input19 [ 44.949478] hid-generic 0003:04D9:4250.0006: input,hidraw5: USB HID v1.10 Keyboard [ USB Keyboard + 3P HUB] on usb-0000:00:14.0-3.1/input0 [ 44.960254] input: USB Keyboard + 3P HUB System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:04D9:4250.0007/input/input20 [ 45.015032] input: USB Keyboard + 3P HUB Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:04D9:4250.0007/input/input21 [ 45.015098] hid-generic 0003:04D9:4250.0007: input,hidraw6: USB HID v1.10 Device [ USB Keyboard + 3P HUB] on usb-0000:00:14.0-3.1/input1 [ 97.820159] usb 3-4: USB disconnect, device number 2 [ 119.207640] usb 3-10: USB disconnect, device number 4 [ 119.207646] usb 3-10.3: USB disconnect, device number 5 [ 119.803389] usb 3-10: new full-speed USB device number 8 using xhci_hcd [ 119.930289] usb 3-10: New USB device found, idVendor=8054, idProduct=0001, bcdDevice= 1.00 [ 119.930306] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 119.930315] usb 3-10: Product: KVM PORT SWITCH [ 119.930323] usb 3-10: Manufacturer: ROCLA [ 119.931339] hub 3-10:1.0: USB hub found [ 119.931453] hub 3-10:1.0: 4 ports detected [ 120.200363] usb 3-10.1: new full-speed USB device number 9 using xhci_hcd [ 120.277452] usb 3-10.1: New USB device found, idVendor=0483, idProduct=5131, bcdDevice= 0.00 [ 120.277459] usb 3-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 120.277462] usb 3-10.1: Product: GK893B [ 120.277465] usb 3-10.1: Manufacturer: CATEX TECH. [ 120.277468] usb 3-10.1: SerialNumber: ... [ 120.280855] input: CATEX TECH. GK893B as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.0/0003:0483:5131.0008/input/input22 [ 120.333033] hid-generic 0003:0483:5131.0008: input,hidraw0: USB HID v1.10 Keyboard [CATEX TECH. GK893B] on usb-0000:00:14.0-10.1/input0 [ 120.334357] hid-generic 0003:0483:5131.0009: hiddev96,hidraw1: USB HID v1.00 Device [CATEX TECH. GK893B] on usb-0000:00:14.0-10.1/input1 [ 120.336712] input: CATEX TECH. GK893B Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.2/0003:0483:5131.000A/input/input23 [ 120.388630] input: CATEX TECH. GK893B System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.2/0003:0483:5131.000A/input/input24 [ 120.388874] input: CATEX TECH. GK893B Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.2/0003:0483:5131.000A/input/input25 [ 120.389447] input: CATEX TECH. GK893B Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.1/3-10.1:1.2/0003:0483:5131.000A/input/input26 [ 120.389776] hid-generic 0003:0483:5131.000A: input,hidraw2: USB HID v1.10 Keyboard [CATEX TECH. GK893B] on usb-0000:00:14.0-10.1/input2 [ 120.453308] usb 3-10.3: new low-speed USB device number 10 using xhci_hcd [ 120.534133] usb 3-10.3: New USB device found, idVendor=058f, idProduct=9410, bcdDevice= 1.22 [ 120.534137] usb 3-10.3: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 120.534140] usb 3-10.3: Product: USB Multimedia Keyboard [ 120.534142] usb 3-10.3: SerialNumber: ... [ 120.538661] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.0/0003:058F:9410.000B/input/input27 [ 120.590997] hid-generic 0003:058F:9410.000B: input,hidraw3: USB HID v1.10 Keyboard [USB Multimedia Keyboard] on usb-0000:00:14.0-10.3/input0 [ 120.594349] input: USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.1/0003:058F:9410.000C/input/input28 [ 120.646755] input: USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.3/3-10.3:1.1/0003:058F:9410.000C/input/input29 [ 120.646970] hid-generic 0003:058F:9410.000C: input,hidraw4: USB HID v1.10 Device [USB Multimedia Keyboard] on usb-0000:00:14.0-10.3/input1 [ 550.718250] st: Version 20160209, fixed bufsize 32768, s/g segs 256


Hardware for Linux and BSD

GitHub