[ 0.969229] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 0.973511] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/LNXVIDEO:01/input/input4 [ 0.991476] nvme nvme0: pci function 0000:01:00.0 [ 0.999694] nvme nvme0: D3 entry latency set to 8 seconds [ 1.008887] nvme nvme0: 8/0/0 default/read/poll queues [ 1.017004] nvme0n1: p1 p2 p3 [ 1.080581] usb 3-2: new full-speed USB device number 3 using xhci_hcd [ 1.266382] usb 3-2: New USB device found, idVendor=1358, idProduct=c123, bcdDevice= 0.00 [ 1.266395] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.266401] usb 3-2: Product: Bluetooth Radio [ 1.266407] usb 3-2: Manufacturer: Realtek [ 1.266426] usb 3-2: SerialNumber: ... [ 1.404426] tsc: Refined TSC clocksource calibration: 2096.063 MHz [ 1.404436] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36a96b689, max_idle_ns: 440795219964 ns [ 1.404683] clocksource: Switched to clocksource tsc [ 4.397389] [drm] amdgpu kernel modesetting enabled. [ 4.412450] amdgpu: Virtual CRAT table created for CPU [ 4.412472] amdgpu: Topology: Add CPU node [ 4.412690] amdgpu 0000:03:00.0: amdgpu: initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x19E5:0x3E19 0xC2). [ 4.412897] amdgpu 0000:03:00.0: amdgpu: register mmio base: 0xC0500000 [ 4.412900] amdgpu 0000:03:00.0: amdgpu: register mmio size: 524288 [ 4.413378] amdgpu 0000:03:00.0: amdgpu: detected ip block number 0 <soc15_common> [ 4.413382] amdgpu 0000:03:00.0: amdgpu: detected ip block number 1 <gmc_v9_0> [ 4.413385] amdgpu 0000:03:00.0: amdgpu: detected ip block number 2 <vega10_ih> [ 4.413388] amdgpu 0000:03:00.0: amdgpu: detected ip block number 3 <psp> [ 4.413391] amdgpu 0000:03:00.0: amdgpu: detected ip block number 4 <powerplay> [ 4.413393] amdgpu 0000:03:00.0: amdgpu: detected ip block number 5 <dm> [ 4.413396] amdgpu 0000:03:00.0: amdgpu: detected ip block number 6 <gfx_v9_0> [ 4.413399] amdgpu 0000:03:00.0: amdgpu: detected ip block number 7 <sdma_v4_0> [ 4.413401] amdgpu 0000:03:00.0: amdgpu: detected ip block number 8 <vcn_v1_0> [ 4.413475] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT [ 4.413478] amdgpu: ATOM BIOS: 113-PICASSO-115 [ 4.434586] Console: switching to colour dummy device 80x25 [ 4.443227] amdgpu 0000:03:00.0: vgaarb: deactivate vga console [ 4.443233] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled [ 4.443290] amdgpu 0000:03:00.0: amdgpu: vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 4.443303] amdgpu 0000:03:00.0: amdgpu: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used) [ 4.443307] amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 4.443320] [drm] Detected VRAM RAM=1024M, BAR=1024M [ 4.443323] [drm] RAM width 128bits DDR4 [ 4.443512] amdgpu 0000:03:00.0: amdgpu: amdgpu: 1024M of VRAM memory ready [ 4.443517] amdgpu 0000:03:00.0: amdgpu: amdgpu: 3431M of GTT memory ready. [ 4.443541] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 4.443795] [drm] PCIE GART of 1024M enabled. [ 4.443798] [drm] PTB located at 0x000000F43FC00000 [ 4.444643] amdgpu: hwmgr_sw_init smu backed is smu10_smu [ 4.445852] amdgpu 0000:03:00.0: amdgpu: Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0 [ 4.466942] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [ 4.571525] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 4.587044] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 4.593939] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [ 4.594705] [drm] DM_PPLIB: values for F clock [ 4.594709] [drm] DM_PPLIB: 667000 in kHz, 2924 in mV [ 4.594712] [drm] DM_PPLIB: 933000 in kHz, 3249 in mV [ 4.594714] [drm] DM_PPLIB: 1067000 in kHz, 3924 in mV [ 4.594717] [drm] DM_PPLIB: 1200000 in kHz, 4074 in mV [ 4.594721] [drm] DM_PPLIB: values for DCF clock [ 4.594723] [drm] DM_PPLIB: 300000 in kHz, 2924 in mV [ 4.594726] [drm] DM_PPLIB: 600000 in kHz, 3249 in mV [ 4.594728] [drm] DM_PPLIB: 626000 in kHz, 3924 in mV [ 4.594731] [drm] DM_PPLIB: 654000 in kHz, 4074 in mV [ 4.595356] amdgpu 0000:03:00.0: amdgpu: [drm] Display Core v3.2.340 initialized on DCN 1.0 [ 4.667218] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [ 4.685979] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 4.685998] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1 [ 4.686213] amdgpu: Virtual CRAT table created for GPU [ 4.686331] amdgpu: Topology: Add dGPU node [0x15d8:0x1002] [ 4.686335] kfd kfd: amdgpu: added device 1002:15d8 [ 4.686353] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8 [ 4.686359] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 4.686363] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 4.686366] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 4.686370] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 4.686374] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 4.686377] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 4.686380] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 4.686383] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 4.686386] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 4.686389] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [ 4.686392] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [ 4.686395] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [ 4.686398] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [ 4.686401] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [ 4.686404] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [ 4.694511] amdgpu: pp_dpm_get_sclk_od was not implemented. [ 4.694515] amdgpu: pp_dpm_get_mclk_od was not implemented. [ 4.694703] amdgpu 0000:03:00.0: amdgpu: Runtime PM not available [ 4.695397] amdgpu 0000:03:00.0: amdgpu: [drm] Using custom brightness curve [ 4.695805] amdgpu 0000:03:00.0: [drm] Registered 4 planes with drm panic [ 4.695807] [drm] Initialized amdgpu 3.64.0 for 0000:03:00.0 on minor 1 [ 4.703438] fbcon: amdgpudrmfb (fb0) is primary device [ 4.710379] Console: switching to colour frame buffer device 240x67 [ 4.714926] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 4.767787] BTRFS: device fsid HASH_F60-89A1-6640-FDBC-7A13E2493A0B devid 1 transid 643165 /dev/nvme0n1p3 (259:3) scanned by mount (270) [ 4.768078] BTRFS info (device nvme0n1p3): first mount of filesystem HASH_F60-89A1-6640-FDBC-7A13E2493A0B [ 4.768089] BTRFS info (device nvme0n1p3): using crc32c (crc32c-lib) checksum algorithm [ 4.770265] BTRFS info (device nvme0n1p3): bdev /dev/nvme0n1p3 errs: wr 0, rd 0, flush 0, corrupt 6, gen 0 [ 4.844818] BTRFS info (device nvme0n1p3): checking UUID tree [ 4.844893] BTRFS info (device nvme0n1p3): enabling ssd optimizations [ 4.844898] BTRFS info (device nvme0n1p3): turning on async discard [ 4.844902] BTRFS info (device nvme0n1p3): enabling free space tree [ 4.950742] systemd[1]: systemd 258.1-1-arch running in system mode (+PAM +AUDIT -SELINUX +APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) [ 4.950759] systemd[1]: Detected architecture x86-64. [ 4.952366] systemd[1]: Hostname set to ... [ 5.103770] systemd[1]: bpf-restrict-fs: LSM BPF program attached [ 5.258265] systemd[1]: Queued start job for default target Graphical Interface. [ 5.284652] systemd[1]: Created slice Virtual Machine and Container Slice. [ 5.285918] systemd[1]: Created slice Slice /system/dirmngr. [ 5.286503] systemd[1]: Created slice Slice /system/getty. [ 5.287078] systemd[1]: Created slice Slice /system/gpg-agent. [ 5.287806] systemd[1]: Created slice Slice /system/gpg-agent-browser. [ 5.288706] systemd[1]: Created slice Slice /system/gpg-agent-extra. [ 5.289354] systemd[1]: Created slice Slice /system/gpg-agent-ssh. [ 5.289960] systemd[1]: Created slice Slice /system/keyboxd. [ 5.290548] systemd[1]: Created slice Slice /system/modprobe. [ 5.291140] systemd[1]: Created slice Slice /system/systemd-fsck. [ 5.291511] systemd[1]: Created slice User and Session Slice. [ 5.291649] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.291765] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.292055] systemd[1]: Set up automount ... [ 5.292147] systemd[1]: Expecting device /dev/disk/by-uuid/16FB-AE93... [ 5.292209] systemd[1]: Expecting device /dev/disk/by-uuid/HASH_178-C59A-8D79-5379-15DEAA60DEA6... [ 5.292280] systemd[1]: Reached target Local Encrypted Volumes. [ 5.292350] systemd[1]: Reached target Image Downloads. [ 5.292419] systemd[1]: Reached target Local Integrity Protected Volumes. [ 5.292499] systemd[1]: Reached target Path Units. [ 5.292562] systemd[1]: Reached target Remote File Systems. [ 5.292626] systemd[1]: Reached target Slice Units. [ 5.292712] systemd[1]: Reached target Local Verity Protected Volumes. [ 5.292868] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.293981] systemd[1]: Listening on Query the User Interactively for a Password. [ 5.295180] systemd[1]: Listening on Process Core Dump Socket. [ 5.296653] systemd[1]: Listening on Credential Encryption/Decryption. [ 5.297962] systemd[1]: Listening on Factory Reset Management. [ 5.298149] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.298313] systemd[1]: Listening on Journal Sockets. [ 5.298447] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 5.298470] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 5.298552] systemd[1]: Listening on Resolve Monitor Varlink Socket. [ 5.298673] systemd[1]: Listening on Resolve Service Varlink Socket. [ 5.298817] systemd[1]: Listening on udev Control Socket. [ 5.298930] systemd[1]: Listening on udev Kernel Socket. [ 5.299058] systemd[1]: Listening on udev Varlink Socket. [ 5.300529] systemd[1]: Mounting Huge Pages File System... [ 5.302067] systemd[1]: Mounting POSIX Message Queue File System... [ 5.303408] systemd[1]: Mounting Kernel Debug File System... [ 5.304731] systemd[1]: Mounting Kernel Trace File System... [ 5.306968] systemd[1]: Starting Create List of Static Device Nodes... [ 5.307194] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs). [ 5.308557] systemd[1]: Mounting Kernel Configuration File System... [ 5.310309] systemd[1]: Starting Load Kernel Module dm_mod... [ 5.310528] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm). [ 5.310595] systemd[1]: Load Kernel Module fuse was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!fuse). [ 5.312064] systemd[1]: Mounting FUSE Control File System... [ 5.313876] systemd[1]: Starting Load Kernel Module loop... [ 5.315368] systemd[1]: Starting Mullvad early boot network blocker... [ 5.315568] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-HASH_2F3-D74F-2DCC-7F25-C1D296350508). [ 5.318601] systemd[1]: Starting Journal Service... [ 5.320714] systemd[1]: Starting Load Kernel Modules... [ 5.320843] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 5.322195] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.322382] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 5.323782] systemd[1]: Starting Load udev Rules from Credentials... [ 5.325251] systemd[1]: Starting Coldplug All udev Devices... [ 5.331143] loop: module loaded [ 5.331322] systemd[1]: Mounted Huge Pages File System. [ 5.332617] systemd[1]: Mounted POSIX Message Queue File System. [ 5.332950] systemd[1]: Mounted Kernel Debug File System. [ 5.333309] systemd[1]: Mounted Kernel Trace File System. [ 5.333930] systemd[1]: Finished Create List of Static Device Nodes. [ 5.335781] systemd[1]: Mounted Kernel Configuration File System. [ 5.337581] systemd[1]: Mounted FUSE Control File System. [ 5.337828] device-mapper: uevent: version 1.0.3 [ 5.338029] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: XXX@XXX [ 5.339786] systemd[1]: XXX@XXX: Deactivated successfully. [ 5.340179] systemd[1]: Finished Load Kernel Module dm_mod. [ 5.341872] systemd[1]: XXX@XXX: Deactivated successfully. [ 5.342208] systemd[1]: Finished Load Kernel Module loop. [ 5.343886] systemd[1]: Finished Load udev Rules from Credentials. [ 5.348258] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met. [ 5.348943] systemd-journald[331]: Collecting audit messages is disabled. [ 5.352466] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... [ 5.354949] Asymmetric key parser 'pkcs8' registered [ 5.356125] systemd[1]: Finished Load Kernel Modules. [ 5.358648] systemd[1]: Starting Apply Kernel Variables... [ 5.375253] systemd[1]: Finished Apply Kernel Variables. [ 5.396266] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. [ 5.439269] systemd[1]: Started Journal Service. [ 6.150016] systemd-journald[331]: Received client request to flush runtime journal. [ 6.156642] systemd-journald[331]: File /var/log/journal/3aed18658df64283bae22b13eba2af81/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 6.659707] snd_pci_acp3x 0000:03:00.5: ACP audio mode : 1 [ 6.667542] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.667552] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 6.671949] Adding 15124996k swap on /dev/nvme0n1p2. Priority:100 extents:1 across:15124996k SS [ 6.678986] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 6.681632] ccp 0000:03:00.2: ccp enabled [ 6.681651] ccp 0000:03:00.2: psp: unable to access the device: you might be running a broken BIOS. [ 6.684911] i2c i2c-11: Successfully instantiated SPD at 0x50 [ 6.685511] i2c i2c-11: Successfully instantiated SPD at 0x51 [ 6.704567] mc: Linux media interface: v0.10 [ 6.704952] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.716201] acpi_cpufreq: overriding BIOS provided _PSD data [ 6.725250] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer [ 6.725256] RAPL PMU: hw unit of domain package 2^-16 Joules [ 6.725259] RAPL PMU: hw unit of domain core 2^-16 Joules [ 6.759727] input: ELAN2204:00 04F3:3109 Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:3109.0001/input/input6 [ 6.759920] input: ELAN2204:00 04F3:3109 Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:3109.0001/input/input8 [ 6.760049] hid-generic 0018:04F3:3109.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN2204:00 04F3:3109] on i2c-ELAN2204:00 [ 6.790904] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.796620] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.796842] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 6.798192] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 [ 6.798202] cfg80211: failed to load regulatory.db [ 6.838053] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 6.838215] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 6.838372] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 6.838580] Bluetooth: Core ver 2.22 [ 6.838604] NET: Registered PF_BLUETOOTH protocol family [ 6.838607] Bluetooth: HCI device and connection manager initialized [ 6.838613] Bluetooth: HCI socket layer initialized [ 6.838618] Bluetooth: L2CAP socket layer initialized [ 6.838626] Bluetooth: SCO socket layer initialized [ 6.843480] input: Huawei WMI hotkeys as /devices/platform/huawei-wmi/input/input9 [ 6.850026] videodev: Linux video capture interface: v2.00 [ 6.861106] ACPI: battery: new hook: Huawei Battery Extension [ 6.864923] ee1004 11-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.867938] ee1004 11-0051: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.871569] input: ELAN2204:00 04F3:3109 Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:3109.0001/input/input10 [ 6.873947] input: ELAN2204:00 04F3:3109 Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:3109.0001/input/input12 [ 6.875833] hid-multitouch 0018:04F3:3109.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN2204:00 04F3:3109] on i2c-ELAN2204:00 [ 6.979522] mousedev: PS/2 mouse device common for all mice [ 6.979564] usbcore: registered new interface driver btusb [ 6.984423] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 6.987387] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 6.987397] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 6.988722] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 6.990396] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [ 7.057084] usb 1-4: Found UVC 1.50 device ov9734_azurewave_camera (13d3:56f8) [ 7.058165] kvm_amd: TSC scaling supported [ 7.058171] kvm_amd: Nested Virtualization enabled [ 7.058175] kvm_amd: Nested Paging enabled [ 7.058179] kvm_amd: LBR virtualization supported [ 7.058187] kvm_amd: SEV disabled (ASIDs 0 - 15) [ 7.058191] kvm_amd: SEV-ES disabled (ASIDs 0 - 4294967295) [ 7.058204] kvm_amd: Virtual VMLOAD VMSAVE supported [ 7.058207] kvm_amd: Virtual GIF supported [ 7.068823] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client [ 7.077633] usbcore: registered new interface driver uvcvideo [ 7.100472] rtw88_8822ce 0000:02:00.0: WOW Firmware version 9.9.4, H2C version 15 [ 7.101324] rtw88_8822ce 0000:02:00.0: Firmware version 9.9.15, H2C version 15 [ 7.101824] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 7.106264] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input13 [ 7.133426] intel_rapl_common: Found RAPL domain package [ 7.133433] intel_rapl_common: Found RAPL domain core [ 7.136476] snd_hda_codec_alc269 hdaudioC1D0: ALC256: picked fixup for PCI SSID 19e5:0000 [ 7.136844] snd_hda_codec_alc269 hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 7.136853] snd_hda_codec_alc269 hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.136859] snd_hda_codec_alc269 hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.136864] snd_hda_codec_alc269 hdaudioC1D0: mono: mono_out=0x0 [ 7.136868] snd_hda_codec_alc269 hdaudioC1D0: inputs: [ 7.136871] snd_hda_codec_alc269 hdaudioC1D0: Mic=0x12 [ 7.138967] amd_atl: AMD Address Translation Library initialized [ 7.177778] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input14 [ 7.462374] Bluetooth: hci0: RTL: fw version 0x2b66d962 [ 7.608380] Bluetooth: hci0: AOSP extensions version v1.00 [ 7.608393] Bluetooth: hci0: AOSP quality report is supported [ 7.725241] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.725247] Bluetooth: BNEP filters: protocol multicast [ 7.725253] Bluetooth: BNEP socket layer initialized [ 7.726600] Bluetooth: MGMT ver 1.23 [ 7.736022] NET: Registered PF_ALG protocol family [ 11.238724] rfkill: input handler disabled [ 11.650664] Bluetooth: RFCOMM TTY layer initialized [ 11.650674] Bluetooth: RFCOMM socket layer initialized [ 11.650679] Bluetooth: RFCOMM ver 1.11 [ 13.393452] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 13.560097] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 13.593421] wlan0: authenticated [ 13.595433] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 13.603216] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [ 13.603623] wlan0: associated [ 13.610407] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 16.961188] systemd-journald[331]: File /var/log/journal/3aed18658df64283bae22b13eba2af81/user-XXXX.journal corrupted or uncleanly shut down, renaming and replacing. [ 17.299089] rfkill: input handler enabled [ 18.676633] rfkill: input handler disabled [ 19.109564] nvme nvme0: using unchecked data buffer [ 37.284952] systemd-journald[331]: Time jumped backwards, rotating. [ 1105.015737] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1105.911291] PM: suspend entry (deep) [ 1105.939783] Filesystems sync: 0.028 seconds [ 1106.044306] Freezing user space processes [ 1106.046541] Freezing user space processes completed (elapsed 0.002 seconds) [ 1106.046552] OOM killer disabled. [ 1106.046556] Freezing remaining freezable tasks [ 1106.048183] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 1106.048255] printk: Suspending console(s) (use no_console_suspend to debug) [ 1106.365595] ACPI: EC: interrupt blocked [ 1106.403710] ACPI: PM: Preparing to enter system sleep state S3 [ 1106.486435] ACPI: EC: event blocked [ 1106.486443] ACPI: EC: EC stopped [ 1106.486446] ACPI: PM: Saving platform NVS memory [ 1106.486636] Disabling non-boot CPUs ... [ 1106.489452] smpboot: CPU 7 is now offline [ 1106.492723] smpboot: CPU 6 is now offline [ 1106.496145] smpboot: CPU 5 is now offline [ 1106.499235] smpboot: CPU 4 is now offline [ 1106.501853] smpboot: CPU 3 is now offline [ 1106.504695] smpboot: CPU 2 is now offline [ 1106.508995] smpboot: CPU 1 is now offline [ 1106.511089] ACPI: PM: Low-level resume complete [ 1106.511119] ACPI: EC: EC started [ 1106.511120] ACPI: PM: Restoring platform NVS memory [ 1106.549463] AMD-Vi: Virtual APIC enabled [ 1106.560976] AMD-Vi: Virtual APIC enabled [ 1106.561721] Enabling non-boot CPUs ... [ 1106.561912] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1106.565286] CPU1 is up [ 1106.565333] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 1106.568526] CPU2 is up [ 1106.568561] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1106.571792] CPU3 is up [ 1106.571817] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 1106.575526] CPU4 is up [ 1106.575553] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 1106.578943] CPU5 is up [ 1106.578968] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 1106.582575] CPU6 is up [ 1106.582609] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 1106.586003] CPU7 is up [ 1106.587173] ACPI: PM: Waking up from system sleep state S3 [ 1106.588596] ACPI: EC: interrupt unblocked [ 1106.595627] ACPI: EC: event unblocked [ 1106.601465] [drm] PCIE GART of 1024M enabled. [ 1106.601470] [drm] PTB located at 0x000000F43FC00000 [ 1106.601494] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [ 1106.608483] nvme nvme0: D3 entry latency set to 8 seconds [ 1106.618417] nvme nvme0: 8/0/0 default/read/poll queues [ 1106.621528] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [ 1106.727421] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 1106.752729] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 1106.761216] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [ 1106.761302] amdgpu: restore the fine grain parameters [ 1106.767290] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [ 1106.780800] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 1106.780803] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 1106.780806] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 1106.780809] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 1106.780812] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 1106.780815] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 1106.780817] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 1106.780820] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 1106.780822] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 1106.780824] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [ 1106.780826] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [ 1106.780828] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [ 1106.780830] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [ 1106.780832] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [ 1106.780834] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [ 1106.829467] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [ 1106.885507] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [ 1107.053516] OOM killer enabled. [ 1107.053524] Restarting tasks: Starting [ 1107.055115] usb 3-1: USB disconnect, device number 2 [ 1107.055192] Restarting tasks: Done [ 1107.055413] random: crng reseeded on system resumption [ 1107.057793] PM: suspend exit [ 1107.058255] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 1107.061226] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 1107.061236] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 1107.061292] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 1107.064285] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [ 1107.172996] usb 3-1: new full-speed USB device number 4 using xhci_hcd [ 1107.332232] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [ 1107.332243] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1107.332248] usb 3-1: Product: Goodix Fingerprint Device [ 1107.332252] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [ 1107.537363] Bluetooth: hci0: RTL: fw version 0x2b66d962 [ 1107.683413] Bluetooth: hci0: AOSP extensions version v1.00 [ 1107.683429] Bluetooth: hci0: AOSP quality report is supported [ 1107.683773] Bluetooth: MGMT ver 1.23 [ 1111.609549] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 1111.771247] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1111.774635] wlan0: authenticated [ 1111.775590] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1111.784407] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [ 1111.784843] wlan0: associated [ 1111.883729] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 1367.559646] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 1620.976206] Bluetooth: hci0: AOSP extensions version v1.00 [ 1620.976242] Bluetooth: hci0: AOSP quality report is supported [ 1628.885483] input: ... (AVRCP) as /devices/virtual/input/input15 [ 2635.541210] usb 1-2: new full-speed USB device number 3 using xhci_hcd [ 2635.685924] usb 1-2: New USB device found, idVendor=28bd, idProduct=0937, bcdDevice= 0.00 [ 2635.685937] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2635.685943] usb 1-2: Product: UGEE S640 [ 2635.685949] usb 1-2: Manufacturer: UGTABLET [ 2635.685954] usb 1-2: SerialNumber: ... [ 2635.734724] input: UGTABLET UGEE S640 Mouse as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2:1.0/0003:28BD:0937.0002/input/input16 [ 2635.734992] input: UGTABLET UGEE S640 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2:1.0/0003:28BD:0937.0002/input/input17 [ 2635.785423] hid-generic 0003:28BD:0937.0002: input,hidraw1: USB HID v1.00 Mouse [UGTABLET UGEE S640] on usb-0000:03:00.3-2/input0 [ 2635.793418] input: UGTABLET UGEE S640 Pen as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2:1.1/0003:28BD:0937.0003/input/input18 [ 2635.793777] hid-generic 0003:28BD:0937.0003: input,hiddev96,hidraw2: USB HID v1.00 Device [UGTABLET UGEE S640] on usb-0000:03:00.3-2/input1 [ 2635.801323] hid-generic 0003:28BD:0937.0004: hiddev97,hidraw3: USB HID v1.00 Device [UGTABLET UGEE S640] on usb-0000:03:00.3-2/input2 [ 3781.286247] i2c_hid_acpi i2c-ELAN2204:00: i2c_hid_get_input: IRQ triggered but there's no data [ 6329.393644] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6330.663335] PM: suspend entry (deep) [ 6330.879723] Filesystems sync: 0.216 seconds [ 6330.890299] Freezing user space processes [ 6330.893049] Freezing user space processes completed (elapsed 0.002 seconds) [ 6330.893058] OOM killer disabled. [ 6330.893061] Freezing remaining freezable tasks [ 6331.017960] Freezing remaining freezable tasks completed (elapsed 0.124 seconds) [ 6331.018008] printk: Suspending console(s) (use no_console_suspend to debug) [ 6331.360977] ACPI: EC: interrupt blocked [ 6331.397316] ACPI: PM: Preparing to enter system sleep state S3 [ 6331.479976] ACPI: EC: event blocked [ 6331.479984] ACPI: EC: EC stopped [ 6331.479987] ACPI: PM: Saving platform NVS memory [ 6331.480176] Disabling non-boot CPUs ... [ 6331.482990] smpboot: CPU 7 is now offline [ 6331.487311] smpboot: CPU 6 is now offline [ 6331.490755] smpboot: CPU 5 is now offline [ 6331.494185] smpboot: CPU 4 is now offline [ 6331.497682] smpboot: CPU 3 is now offline [ 6331.500919] smpboot: CPU 2 is now offline [ 6331.504500] smpboot: CPU 1 is now offline [ 6331.506408] ACPI: PM: Low-level resume complete [ 6331.506440] ACPI: EC: EC started [ 6331.506442] ACPI: PM: Restoring platform NVS memory [ 6331.516321] AMD-Vi: Virtual APIC enabled [ 6331.555979] AMD-Vi: Virtual APIC enabled [ 6331.556722] Enabling non-boot CPUs ... [ 6331.556916] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6331.560399] CPU1 is up [ 6331.560448] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 6331.563607] CPU2 is up [ 6331.563633] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 6331.567021] CPU3 is up [ 6331.567058] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 6331.570410] CPU4 is up [ 6331.570435] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 6331.573887] CPU5 is up [ 6331.573913] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 6331.577535] CPU6 is up [ 6331.577559] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 6331.581048] CPU7 is up [ 6331.582276] ACPI: PM: Waking up from system sleep state S3 [ 6331.583722] ACPI: EC: interrupt unblocked [ 6331.594642] ACPI: EC: event unblocked [ 6331.601489] [drm] PCIE GART of 1024M enabled. [ 6331.601494] [drm] PTB located at 0x000000F43FC00000 [ 6331.601519] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [ 6331.607813] nvme nvme0: D3 entry latency set to 8 seconds [ 6331.617867] nvme nvme0: 8/0/0 default/read/poll queues [ 6331.621555] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [ 6331.741181] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 6331.759403] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 6331.767818] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [ 6331.767908] amdgpu: restore the fine grain parameters [ 6331.774438] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [ 6331.788027] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 6331.788032] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 6331.788035] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 6331.788039] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 6331.788042] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 6331.788045] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 6331.788048] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 6331.788051] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 6331.788054] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 6331.788057] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [ 6331.788060] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [ 6331.788063] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [ 6331.788066] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [ 6331.788069] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [ 6331.788072] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [ 6331.876446] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [ 6331.885494] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [ 6332.053670] OOM killer enabled. [ 6332.053678] Restarting tasks: Starting [ 6332.053784] usb 3-1: USB disconnect, device number 4 [ 6332.058097] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 6332.058599] Restarting tasks: Done [ 6332.058705] random: crng reseeded on system resumption [ 6332.060819] PM: suspend exit [ 6332.061082] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 6332.061091] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 6332.063055] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 6332.065149] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [ 6332.173172] usb 3-1: new full-speed USB device number 5 using xhci_hcd [ 6332.336038] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [ 6332.336052] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6332.336059] usb 3-1: Product: Goodix Fingerprint Device [ 6332.336065] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [ 6332.539084] Bluetooth: hci0: RTL: fw version 0x2b66d962 [ 6332.685134] Bluetooth: hci0: AOSP extensions version v1.00 [ 6332.685145] Bluetooth: hci0: AOSP quality report is supported [ 6332.685360] Bluetooth: MGMT ver 1.23 [ 6336.899965] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 6336.960560] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6336.964264] wlan0: authenticated [ 6336.964948] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6336.970432] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [ 6336.970833] wlan0: associated [ 6337.050174] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 6337.547611] input: ... (AVRCP) as /devices/virtual/input/input19 [ 6625.566780] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 6625.789440] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 6625.943009] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6625.946394] wlan0: authenticated [ 6625.956910] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6625.963692] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [ 6625.964278] wlan0: associated [ 6626.010547] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 6649.876471] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 6649.876483] wireguard: Copyright (C) A495-00C9 Jason A. Donenfeld <XXX@XXX>. All Rights Reserved. [ 9057.721774] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [11028.157429] perf: interrupt took too long (3129 > 3128), lowering kernel.perf_event_max_sample_rate to 63000 [12491.786744] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [12492.851158] usb 1-2: USB disconnect, device number 3 [12496.832911] PM: suspend entry (deep) [12496.903878] Filesystems sync: 0.070 seconds [12497.009952] Freezing user space processes [12497.012710] Freezing user space processes completed (elapsed 0.002 seconds) [12497.012721] OOM killer disabled. [12497.012725] Freezing remaining freezable tasks [12497.014415] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [12497.014459] printk: Suspending console(s) (use no_console_suspend to debug) [12497.301876] ACPI: EC: interrupt blocked [12497.339574] ACPI: PM: Preparing to enter system sleep state S3 [12497.422322] ACPI: EC: event blocked [12497.422330] ACPI: EC: EC stopped [12497.422333] ACPI: PM: Saving platform NVS memory [12497.422529] Disabling non-boot CPUs ... [12497.425388] smpboot: CPU 7 is now offline [12497.430912] smpboot: CPU 6 is now offline [12497.435413] smpboot: CPU 5 is now offline [12497.439536] smpboot: CPU 4 is now offline [12497.443711] smpboot: CPU 3 is now offline [12497.448453] smpboot: CPU 2 is now offline [12497.453123] smpboot: CPU 1 is now offline [12497.455842] ACPI: PM: Low-level resume complete [12497.455880] ACPI: EC: EC started [12497.455881] ACPI: PM: Restoring platform NVS memory [12497.461760] AMD-Vi: Virtual APIC enabled [12497.505422] AMD-Vi: Virtual APIC enabled [12497.506173] Enabling non-boot CPUs ... [12497.506368] smpboot: Booting Node 0 Processor 1 APIC 0x1 [12497.509764] CPU1 is up [12497.509814] smpboot: Booting Node 0 Processor 2 APIC 0x2 [12497.512984] CPU2 is up [12497.513013] smpboot: Booting Node 0 Processor 3 APIC 0x3 [12497.516374] CPU3 is up [12497.516400] smpboot: Booting Node 0 Processor 4 APIC 0x4 [12497.519794] CPU4 is up [12497.519825] smpboot: Booting Node 0 Processor 5 APIC 0x5 [12497.523202] CPU5 is up [12497.523234] smpboot: Booting Node 0 Processor 6 APIC 0x6 [12497.526899] CPU6 is up [12497.526931] smpboot: Booting Node 0 Processor 7 APIC 0x7 [12497.530399] CPU7 is up [12497.531540] ACPI: PM: Waking up from system sleep state S3 [12497.534459] ACPI: EC: interrupt unblocked [12497.543454] ACPI: EC: event unblocked [12497.545385] [drm] PCIE GART of 1024M enabled. [12497.545389] [drm] PTB located at 0x000000F43FC00000 [12497.545410] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [12497.552091] nvme nvme0: D3 entry latency set to 8 seconds [12497.561835] nvme nvme0: 8/0/0 default/read/poll queues [12497.565440] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [12497.682548] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [12497.709720] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [12497.717926] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [12497.718689] amdgpu: restore the fine grain parameters [12497.723873] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [12497.737121] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [12497.737126] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [12497.737128] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [12497.737131] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [12497.737134] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [12497.737136] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [12497.737139] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [12497.737141] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [12497.737143] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [12497.737146] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [12497.737149] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [12497.737151] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [12497.737153] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [12497.737156] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [12497.737159] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [12497.776150] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [12497.830889] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [12497.998800] OOM killer enabled. [12497.998804] Restarting tasks: Starting [12497.998852] usb 3-1: USB disconnect, device number 5 [12498.000848] Restarting tasks: Done [12498.000888] random: crng reseeded on system resumption [12498.002397] PM: suspend exit [12498.002590] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [12498.005495] Bluetooth: hci0: RTL: rom_version status=0 version=3 [12498.005502] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [12498.005543] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [12498.008575] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [12498.139631] usb 3-1: new full-speed USB device number 6 using xhci_hcd [12498.298535] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [12498.298550] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [12498.298558] usb 3-1: Product: Goodix Fingerprint Device [12498.298564] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [12498.480492] Bluetooth: hci0: RTL: fw version 0x2b66d962 [12498.626484] Bluetooth: hci0: AOSP extensions version v1.00 [12498.626498] Bluetooth: hci0: AOSP quality report is supported [12498.626688] Bluetooth: MGMT ver 1.23 [12502.604470] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [12502.757115] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [12502.760435] wlan0: authenticated [12502.761548] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [12502.766958] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=60) [12502.767326] wlan0: associated [12502.831109] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [12535.893359] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [12536.114949] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [12536.267564] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [12536.270917] wlan0: authenticated [12536.274054] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [12536.299343] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [12536.299705] wlan0: associated [12536.360408] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [14934.348125] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [14934.567905] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [14934.719426] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14934.722784] wlan0: authenticated [14934.723879] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14934.751752] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=6) [14934.752145] wlan0: associated [14934.905353] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [15023.589404] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15023.811190] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15023.974800] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15023.978193] wlan0: authenticated [15023.984181] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15024.015525] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [15024.015999] wlan0: associated [15024.056871] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [16304.308997] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16304.471429] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16304.474846] wlan0: authenticated [16304.476841] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16304.481299] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=9) [16304.481667] wlan0: associated [16304.490525] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [16317.857835] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [16318.079682] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16318.242253] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16318.259272] wlan0: authenticated [16318.259671] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16318.274210] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [16318.274658] wlan0: associated [16318.287762] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [17829.804064] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [17829.968574] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [17829.971954] wlan0: authenticated [17829.977023] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [17829.980409] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=6) [17829.980783] wlan0: associated [17830.029659] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [17983.335805] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [17983.576053] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [17983.738989] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [17983.749851] wlan0: authenticated [17983.750932] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [17983.759630] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [17983.760100] wlan0: associated [17983.814834] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [18883.464426] input: ... (AVRCP) as /devices/virtual/input/input20 [19151.704621] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19151.962253] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19152.117804] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19152.121116] wlan0: authenticated [19152.128236] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19152.134936] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=8) [19152.135385] wlan0: associated [19152.205254] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [19443.310472] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19443.560411] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19443.722857] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19443.726211] wlan0: authenticated [19443.727304] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19443.732894] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=3) [19443.733402] wlan0: associated [19443.829595] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [23341.592166] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [23342.789545] PM: suspend entry (deep) [23342.820397] Filesystems sync: 0.030 seconds [23342.925019] Freezing user space processes [23342.927326] Freezing user space processes completed (elapsed 0.002 seconds) [23342.927338] OOM killer disabled. [23342.927343] Freezing remaining freezable tasks [23342.928972] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [23342.929007] printk: Suspending console(s) (use no_console_suspend to debug) [23343.092100] ACPI: EC: interrupt blocked [23343.129018] ACPI: PM: Preparing to enter system sleep state S3 [23343.211671] ACPI: EC: event blocked [23343.211676] ACPI: EC: EC stopped [23343.211678] ACPI: PM: Saving platform NVS memory [23343.211822] Disabling non-boot CPUs ... [23343.214668] smpboot: CPU 7 is now offline [23343.218619] smpboot: CPU 6 is now offline [23343.222179] smpboot: CPU 5 is now offline [23343.225840] smpboot: CPU 4 is now offline [23343.228679] smpboot: CPU 3 is now offline [23343.231298] smpboot: CPU 2 is now offline [23343.235373] smpboot: CPU 1 is now offline [23343.237971] ACPI: PM: Low-level resume complete [23343.238009] ACPI: EC: EC started [23343.238011] ACPI: PM: Restoring platform NVS memory [23343.279909] AMD-Vi: Virtual APIC enabled [23343.287439] AMD-Vi: Virtual APIC enabled [23343.288185] Enabling non-boot CPUs ... [23343.288377] smpboot: Booting Node 0 Processor 1 APIC 0x1 [23343.291798] CPU1 is up [23343.291847] smpboot: Booting Node 0 Processor 2 APIC 0x2 [23343.295006] CPU2 is up [23343.295033] smpboot: Booting Node 0 Processor 3 APIC 0x3 [23343.298402] CPU3 is up [23343.298430] smpboot: Booting Node 0 Processor 4 APIC 0x4 [23343.301835] CPU4 is up [23343.301865] smpboot: Booting Node 0 Processor 5 APIC 0x5 [23343.305219] CPU5 is up [23343.305243] smpboot: Booting Node 0 Processor 6 APIC 0x6 [23343.308907] CPU6 is up [23343.308942] smpboot: Booting Node 0 Processor 7 APIC 0x7 [23343.312448] CPU7 is up [23343.313607] ACPI: PM: Waking up from system sleep state S3 [23343.314820] ACPI: EC: interrupt unblocked [23343.322063] ACPI: EC: event unblocked [23343.327650] [drm] PCIE GART of 1024M enabled. [23343.327653] [drm] PTB located at 0x000000F43FC00000 [23343.327675] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [23343.332135] nvme nvme0: D3 entry latency set to 8 seconds [23343.342202] nvme nvme0: 8/0/0 default/read/poll queues [23343.347706] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [23343.451578] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [23343.471370] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [23343.479372] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [23343.479774] amdgpu: restore the fine grain parameters [23343.484971] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [23343.498198] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [23343.498202] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [23343.498205] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [23343.498208] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [23343.498211] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [23343.498213] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [23343.498216] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [23343.498218] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [23343.498221] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [23343.498223] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [23343.498226] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [23343.498229] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [23343.498231] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [23343.498234] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [23343.498236] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [23343.549758] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [23343.610942] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [23343.777976] OOM killer enabled. [23343.777983] Restarting tasks: Starting [23343.778050] usb 3-1: USB disconnect, device number 6 [23343.780913] Restarting tasks: Done [23343.780990] random: crng reseeded on system resumption [23343.781818] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [23343.784427] PM: suspend exit [23343.784790] Bluetooth: hci0: RTL: rom_version status=0 version=3 [23343.784802] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [23343.794558] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [23343.796931] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [23343.898694] usb 3-1: new full-speed USB device number 7 using xhci_hcd [23344.058748] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [23344.058756] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [23344.058759] usb 3-1: Product: Goodix Fingerprint Device [23344.058762] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [23344.271786] Bluetooth: hci0: RTL: fw version 0x2b66d962 [23344.417780] Bluetooth: hci0: AOSP extensions version v1.00 [23344.417785] Bluetooth: hci0: AOSP quality report is supported [23344.417961] Bluetooth: MGMT ver 1.23 [23348.340553] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [23348.498202] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [23348.501556] wlan0: authenticated [23348.502637] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [23348.523757] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=10) [23348.524250] wlan0: associated [23348.557189] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [23374.356724] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [23374.576494] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [23374.728440] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [23374.731802] wlan0: authenticated [23374.736488] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [23374.743162] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [23374.743616] wlan0: associated [23374.826028] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [23427.105987] input: ... (AVRCP) as /devices/virtual/input/input21 [25032.222270] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [25032.452103] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [25032.603693] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [25032.608134] wlan0: authenticated [25032.612108] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [25032.618768] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=12) [25032.619167] wlan0: associated [25032.710407] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [25961.737021] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [25961.968765] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [25962.133352] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [25962.136761] wlan0: authenticated [25962.138802] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [25962.143996] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [25962.144401] wlan0: associated [25962.160320] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [26812.453205] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [26813.542007] PM: suspend entry (deep) [26813.575148] Filesystems sync: 0.033 seconds [26813.592115] Freezing user space processes [26813.593934] Freezing user space processes completed (elapsed 0.001 seconds) [26813.593940] OOM killer disabled. [26813.593942] Freezing remaining freezable tasks [26813.595436] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [26813.595462] printk: Suspending console(s) (use no_console_suspend to debug) [26813.725490] ACPI: EC: interrupt blocked [26813.762332] ACPI: PM: Preparing to enter system sleep state S3 [26813.844684] ACPI: EC: event blocked [26813.844689] ACPI: EC: EC stopped [26813.844692] ACPI: PM: Saving platform NVS memory [26813.844844] Disabling non-boot CPUs ... [26813.847939] smpboot: CPU 7 is now offline [26813.851961] smpboot: CPU 6 is now offline [26813.854998] smpboot: CPU 5 is now offline [26813.857968] smpboot: CPU 4 is now offline [26813.860771] smpboot: CPU 3 is now offline [26813.863332] smpboot: CPU 2 is now offline [26813.866899] smpboot: CPU 1 is now offline [26813.869279] ACPI: PM: Low-level resume complete [26813.869317] ACPI: EC: EC started [26813.869318] ACPI: PM: Restoring platform NVS memory [26813.879114] AMD-Vi: Virtual APIC enabled [26813.918804] AMD-Vi: Virtual APIC enabled [26813.919549] Enabling non-boot CPUs ... [26813.919741] smpboot: Booting Node 0 Processor 1 APIC 0x1 [26813.923157] CPU1 is up [26813.923210] smpboot: Booting Node 0 Processor 2 APIC 0x2 [26813.926434] CPU2 is up [26813.926468] smpboot: Booting Node 0 Processor 3 APIC 0x3 [26813.929880] CPU3 is up [26813.929912] smpboot: Booting Node 0 Processor 4 APIC 0x4 [26813.933293] CPU4 is up [26813.933338] smpboot: Booting Node 0 Processor 5 APIC 0x5 [26813.936844] CPU5 is up [26813.936904] smpboot: Booting Node 0 Processor 6 APIC 0x6 [26813.940447] CPU6 is up [26813.940487] smpboot: Booting Node 0 Processor 7 APIC 0x7 [26813.944183] CPU7 is up [26813.945367] ACPI: PM: Waking up from system sleep state S3 [26813.947064] ACPI: EC: interrupt unblocked [26813.954699] ACPI: EC: event unblocked [26813.959108] [drm] PCIE GART of 1024M enabled. [26813.959111] [drm] PTB located at 0x000000F43FC00000 [26813.959133] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [26813.965566] nvme nvme0: D3 entry latency set to 8 seconds [26813.975290] nvme nvme0: 8/0/0 default/read/poll queues [26813.979161] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [26814.083818] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [26814.101193] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [26814.109297] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [26814.109433] amdgpu: restore the fine grain parameters [26814.114662] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [26814.127964] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [26814.127968] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [26814.127971] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [26814.127974] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [26814.127977] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [26814.127979] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [26814.127982] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [26814.127984] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [26814.127987] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [26814.127989] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [26814.127992] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [26814.127994] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [26814.127997] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [26814.127999] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [26814.128002] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [26814.182400] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [26814.242239] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [26814.409046] OOM killer enabled. [26814.409050] Restarting tasks: Starting [26814.409118] usb 3-1: USB disconnect, device number 7 [26814.409980] Restarting tasks: Done [26814.410040] random: crng reseeded on system resumption [26814.412902] PM: suspend exit [26814.413684] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [26814.416655] Bluetooth: hci0: RTL: rom_version status=0 version=3 [26814.416662] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [26814.416700] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [26814.419802] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [26814.535105] usb 3-1: new full-speed USB device number 8 using xhci_hcd [26814.694621] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [26814.694635] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [26814.694641] usb 3-1: Product: Goodix Fingerprint Device [26814.694647] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [26814.891646] Bluetooth: hci0: RTL: fw version 0x2b66d962 [26815.037644] Bluetooth: hci0: AOSP extensions version v1.00 [26815.037658] Bluetooth: hci0: AOSP quality report is supported [26815.037917] Bluetooth: MGMT ver 1.23 [26819.008838] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [26819.070025] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26819.073362] wlan0: authenticated [26819.073951] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [26819.079858] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [26819.080333] wlan0: associated [26819.110571] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [27368.066601] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [27368.289245] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [27368.449326] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [27368.453358] wlan0: authenticated [27368.454255] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [27368.476624] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=13) [27368.477058] wlan0: associated [27368.592343] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [27728.327179] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [27728.561970] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [27728.713523] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [27728.716905] wlan0: authenticated [27728.722967] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [27728.729645] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [27728.730047] wlan0: associated [27728.828976] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [27956.637553] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [27956.858639] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [27957.015899] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [27957.019257] wlan0: authenticated [27957.020313] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [27957.025752] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=13) [27957.026129] wlan0: associated [27957.078885] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28066.283106] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [28066.568936] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [28066.722514] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28066.725945] wlan0: authenticated [28066.726939] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28066.735633] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [28066.736061] wlan0: associated [28066.748722] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28191.806583] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [28191.806593] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [28191.878763] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [28191.878773] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [28201.347710] input: ... (AVRCP) as /devices/virtual/input/input22 [28246.617451] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28246.837140] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [28246.989659] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28246.993049] wlan0: authenticated [28246.999060] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28247.005697] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [28247.006174] wlan0: associated [28247.074980] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [28305.569005] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28305.799711] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [28305.967392] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28305.970739] wlan0: authenticated [28305.972817] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28305.980526] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [28305.980924] wlan0: associated [28306.055546] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29903.162612] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [29903.162619] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [29903.267436] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [29903.267446] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [29920.622835] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29920.842551] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [29920.994133] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29920.997490] wlan0: authenticated [29920.998541] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29921.003968] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [29921.004343] wlan0: associated [29921.089607] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [30731.571605] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [30731.793310] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [30731.957946] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30731.961309] wlan0: authenticated [30731.967460] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30731.974140] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [30731.974550] wlan0: associated [30732.005748] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [30758.557136] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [30758.716720] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30758.720062] wlan0: authenticated [30758.723124] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30758.726585] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [30758.727003] wlan0: associated [30758.816221] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [30806.595054] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [30806.824521] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [30807.000207] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30807.003588] wlan0: authenticated [30807.006626] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30807.013378] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [30807.013812] wlan0: associated [30807.063070] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [30909.557838] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [30909.792520] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [30909.961102] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30909.964439] wlan0: authenticated [30909.966584] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30909.970949] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [30909.971417] wlan0: associated [30910.058233] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [31013.610733] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [31013.839494] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [31014.003023] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [31014.006380] wlan0: authenticated [31014.011469] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [31014.018136] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [31014.018521] wlan0: associated [31014.115011] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [32675.581769] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [32675.836135] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [32675.897323] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [32675.903894] wlan0: authenticated [32675.904211] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [32675.910419] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [32675.910886] wlan0: associated [32675.958050] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [32767.549421] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [32767.779279] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [32767.940799] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [32767.944134] wlan0: authenticated [32767.945237] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [32767.950650] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [32767.951019] wlan0: associated [32767.984147] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [32805.491038] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [32805.719903] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [32805.885360] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [32805.888708] wlan0: authenticated [32805.890784] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [32805.896289] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=3) [32805.896691] wlan0: associated [32805.907878] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [32832.209819] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [32832.433426] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [32832.585051] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [32832.588493] wlan0: authenticated [32832.591491] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [32832.612909] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [32832.613401] wlan0: associated [32832.700168] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [32880.593355] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [32880.829967] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [32880.991508] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [32880.994881] wlan0: authenticated [32880.995946] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [32881.001390] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=3) [32881.001816] wlan0: associated [32881.064102] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [34483.697364] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [34484.944071] PM: suspend entry (deep) [34484.979951] Filesystems sync: 0.035 seconds [34484.980980] Freezing user space processes [34484.983468] Freezing user space processes completed (elapsed 0.002 seconds) [34484.983477] OOM killer disabled. [34484.983481] Freezing remaining freezable tasks [34484.985166] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [34484.985198] printk: Suspending console(s) (use no_console_suspend to debug) [34485.219930] ACPI: EC: interrupt blocked [34485.256396] ACPI: PM: Preparing to enter system sleep state S3 [34485.338685] ACPI: EC: event blocked [34485.338692] ACPI: EC: EC stopped [34485.338695] ACPI: PM: Saving platform NVS memory [34485.339204] Disabling non-boot CPUs ... [34485.341835] smpboot: CPU 7 is now offline [34485.345244] smpboot: CPU 6 is now offline [34485.348964] smpboot: CPU 5 is now offline [34485.352369] smpboot: CPU 4 is now offline [34485.355037] smpboot: CPU 3 is now offline [34485.358230] smpboot: CPU 2 is now offline [34485.361846] smpboot: CPU 1 is now offline [34485.364381] ACPI: PM: Low-level resume complete [34485.364419] ACPI: EC: EC started [34485.364420] ACPI: PM: Restoring platform NVS memory [34485.396304] AMD-Vi: Virtual APIC enabled [34485.413878] AMD-Vi: Virtual APIC enabled [34485.414629] Enabling non-boot CPUs ... [34485.414822] smpboot: Booting Node 0 Processor 1 APIC 0x1 [34485.418255] CPU1 is up [34485.418305] smpboot: Booting Node 0 Processor 2 APIC 0x2 [34485.421475] CPU2 is up [34485.421502] smpboot: Booting Node 0 Processor 3 APIC 0x3 [34485.424911] CPU3 is up [34485.424948] smpboot: Booting Node 0 Processor 4 APIC 0x4 [34485.428312] CPU4 is up [34485.428350] smpboot: Booting Node 0 Processor 5 APIC 0x5 [34485.431841] CPU5 is up [34485.431882] smpboot: Booting Node 0 Processor 6 APIC 0x6 [34485.435485] CPU6 is up [34485.435522] smpboot: Booting Node 0 Processor 7 APIC 0x7 [34485.438990] CPU7 is up [34485.440207] ACPI: PM: Waking up from system sleep state S3 [34485.444331] ACPI: EC: interrupt unblocked [34485.456798] ACPI: EC: event unblocked [34485.460515] [drm] PCIE GART of 1024M enabled. [34485.460519] [drm] PTB located at 0x000000F43FC00000 [34485.460541] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [34485.468419] nvme nvme0: D3 entry latency set to 8 seconds [34485.478958] nvme nvme0: 8/0/0 default/read/poll queues [34485.480574] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [34485.655037] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [34485.675458] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [34485.683933] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [34485.684362] amdgpu: restore the fine grain parameters [34485.685968] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [34485.690704] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [34485.704422] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [34485.704427] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [34485.704430] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [34485.704433] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [34485.704436] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [34485.704439] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [34485.704442] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [34485.704445] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [34485.704448] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [34485.704451] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [34485.704454] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [34485.704457] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [34485.704459] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [34485.704462] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [34485.704465] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [34485.745378] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [34485.914800] OOM killer enabled. [34485.914808] Restarting tasks: Starting [34485.914939] usb 3-1: USB disconnect, device number 8 [34485.916359] Restarting tasks: Done [34485.916497] random: crng reseeded on system resumption [34485.919268] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [34485.920605] PM: suspend exit [34485.922186] Bluetooth: hci0: RTL: rom_version status=0 version=3 [34485.922202] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [34485.931915] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [34485.934234] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [34486.033910] usb 3-1: new full-speed USB device number 9 using xhci_hcd [34486.193198] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [34486.193209] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [34486.193214] usb 3-1: Product: Goodix Fingerprint Device [34486.193219] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [34486.408192] Bluetooth: hci0: RTL: fw version 0x2b66d962 [34486.554204] Bluetooth: hci0: AOSP extensions version v1.00 [34486.554216] Bluetooth: hci0: AOSP quality report is supported [34486.565855] Bluetooth: MGMT ver 1.23 [34490.556764] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [34490.625833] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [34490.629227] wlan0: authenticated [34490.629729] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [34490.635704] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [34490.636192] wlan0: associated [34490.732907] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [34497.315080] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34497.315090] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34499.144178] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34499.144194] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34499.813149] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34499.813161] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34500.336749] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34500.336760] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34500.428102] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34500.428113] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34500.567350] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34500.567368] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34500.627329] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34500.627347] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34500.742839] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34500.742856] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34500.794824] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34500.794836] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34500.906142] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34500.906154] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34500.980564] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34500.980580] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34501.333695] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [34501.333712] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [34566.727193] Bluetooth: hci0: AOSP extensions version v1.00 [34566.727205] Bluetooth: hci0: AOSP quality report is supported [34607.448830] input: ... (AVRCP) as /devices/virtual/input/input23 [35076.453735] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35076.453749] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35076.580391] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35076.580402] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35076.683052] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35076.683069] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35076.795751] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35076.795767] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35076.830537] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35076.830551] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35076.969694] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35076.969707] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35077.538444] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35077.538461] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35077.625606] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35077.625617] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35077.878765] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35077.878779] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35077.954462] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35077.954474] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35078.020861] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35078.020871] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35078.107127] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35078.107138] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35078.214720] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35078.214729] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35078.292811] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35078.292824] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35078.375378] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35078.375396] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35078.452555] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35078.452567] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35078.527609] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35078.527621] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35078.630072] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [35078.630083] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [35127.261312] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [35127.492079] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [35127.644594] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [35127.647910] wlan0: authenticated [35127.649030] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [35127.671332] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [35127.671823] wlan0: associated [35127.744727] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [35153.942910] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [35154.160567] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [35154.325171] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [35154.328529] wlan0: authenticated [35154.331594] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [35154.338319] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [35154.338780] wlan0: associated [35154.381071] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [37480.252880] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [37480.500687] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [37480.652165] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37480.658772] wlan0: authenticated [37480.659611] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37480.681502] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [37480.682048] wlan0: associated [37480.769961] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [37528.965019] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [37529.189649] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [37529.342271] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37529.345686] wlan0: authenticated [37529.351698] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37529.358397] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [37529.358943] wlan0: associated [37529.436166] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [37554.973205] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [37555.202835] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [37555.373379] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37555.376700] wlan0: authenticated [37555.377819] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37555.383200] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [37555.383623] wlan0: associated [37555.420999] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [37668.996895] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [37669.220685] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [37669.385314] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37669.388654] wlan0: authenticated [37669.392744] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37669.399414] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [37669.399841] wlan0: associated [37669.416574] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [37729.969571] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [37730.196483] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [37730.349934] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37730.356556] wlan0: authenticated [37730.357403] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37730.363042] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [37730.363477] wlan0: associated [37730.418104] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [37778.529782] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [37778.767602] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [37778.932096] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37778.935425] wlan0: authenticated [37778.936525] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37778.945205] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [37778.945634] wlan0: associated [37778.983963] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39396.982756] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [39397.212656] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39397.367139] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39397.370492] wlan0: authenticated [39397.372575] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39397.377008] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [39397.377399] wlan0: associated [39397.471918] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39422.952745] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [39423.187605] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39423.361032] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39423.364376] wlan0: authenticated [39423.370457] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39423.377190] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [39423.377691] wlan0: associated [39423.419281] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39449.245602] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [39449.468345] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39449.621886] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39449.625295] wlan0: authenticated [39449.629323] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39449.635991] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [39449.636450] wlan0: associated [39449.695330] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39587.944494] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [39588.174392] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39588.338840] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39588.342205] wlan0: authenticated [39588.346272] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39588.352979] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [39588.353398] wlan0: associated [39588.387483] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39668.880740] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [39669.103640] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39669.255161] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39669.258544] wlan0: authenticated [39669.264620] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39669.271261] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [39669.271687] wlan0: associated [39669.341791] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39785.192636] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [39785.425495] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39785.588948] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39785.592298] wlan0: authenticated [39785.593383] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39785.615519] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [39785.616004] wlan0: associated [39785.709082] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39822.896876] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [39823.114676] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39823.266273] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39823.269655] wlan0: authenticated [39823.273706] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39823.280367] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [39823.280881] wlan0: associated [39823.348871] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39849.198233] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [39849.431001] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39849.594549] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39849.597885] wlan0: authenticated [39849.603961] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39849.613926] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [39849.614360] wlan0: associated [39849.708744] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [40493.977837] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [40494.214656] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [40494.363182] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [40494.366602] wlan0: authenticated [40494.368589] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [40494.386473] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=19) [40494.387059] wlan0: associated [40494.471436] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [40509.600243] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [40509.829883] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [40509.982456] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [40509.985922] wlan0: authenticated [40509.986882] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [40509.992399] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [40509.992922] wlan0: associated [40510.084117] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [40813.026879] perf: interrupt took too long (3952 > 3911), lowering kernel.perf_event_max_sample_rate to 50000 [42025.439166] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [42025.451209] usb 2-2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 [42025.451226] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [42025.451234] usb 2-2: Product: SanDisk 3.2Gen1 [42025.451241] usb 2-2: Manufacturer: USB [42025.451248] usb 2-2: SerialNumber: ... [42025.506123] usb-storage 2-2:1.0: USB Mass Storage device detected [42025.506495] scsi host0: usb-storage 2-2:1.0 [42025.506752] usbcore: registered new interface driver usb-storage [42025.515866] usbcore: registered new interface driver uas [42026.567653] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [42026.571008] sd 0:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB) [42026.571379] sd 0:0:0:0: [sda] Write Protect is off [42026.571387] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [42026.571716] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [42026.589264] sda: [42026.589339] sd 0:0:0:0: [sda] Attached SCSI removable disk [42032.662305] usb 2-2: USB disconnect, device number 2 [42038.287109] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd [42038.311160] usb 2-2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01 [42038.311173] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [42038.311178] usb 2-2: Product: DataTraveler 3.0 [42038.311184] usb 2-2: Manufacturer: Kingston [42038.311188] usb 2-2: SerialNumber: ... [42038.317894] usb-storage 2-2:1.0: USB Mass Storage device detected [42038.318155] scsi host0: usb-storage 2-2:1.0 [42039.368604] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [42039.369864] sd 0:0:0:0: [sda] 30218842 512-byte logical blocks: (15.5 GB/14.4 GiB) [42039.370051] sd 0:0:0:0: [sda] Write Protect is off [42039.370057] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00 [42039.370239] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [42039.394471] sda: [42039.394535] sd 0:0:0:0: [sda] Attached SCSI removable disk [42045.128634] usb 2-2: USB disconnect, device number 3 [42051.854301] usb 1-2: new high-speed USB device number 6 using xhci_hcd [42052.148756] usb 1-2: New USB device found, idVendor=05dc, idProduct=c75c, bcdDevice= 1.02 [42052.148768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [42052.148774] usb 1-2: Product: USB Flash Drive [42052.148778] usb 1-2: Manufacturer: Lexar [42052.148781] usb 1-2: SerialNumber: ... [42052.149844] usb-storage 1-2:1.0: USB Mass Storage device detected [42052.150102] scsi host0: usb-storage 1-2:1.0 [42054.410792] scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 8.07 PQ: 0 ANSI: 4 [42056.348626] sd 0:0:0:0: [sda] 31285248 512-byte logical blocks: (16.0 GB/14.9 GiB) [42056.349357] sd 0:0:0:0: [sda] Write Protect is off [42056.349369] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [42056.350067] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [42056.372345] sda: [42056.372449] sd 0:0:0:0: [sda] Attached SCSI removable disk [42082.954737] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [42083.178539] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [42083.330145] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [42083.343024] wlan0: authenticated [42083.343473] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [42083.349527] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=18) [42083.350008] wlan0: associated [42083.397213] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [42500.492367] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [42500.719986] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [42500.873621] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [42500.877078] wlan0: authenticated [42500.879970] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [42500.886790] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [42500.887299] wlan0: associated [42500.940114] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [42891.905794] sda: sda1 sda2 [43153.478164] usb 1-2: USB disconnect, device number 6 [43164.272399] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [43164.283870] usb 2-2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 [43164.283884] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [43164.283893] usb 2-2: Product: SanDisk 3.2Gen1 [43164.283900] usb 2-2: Manufacturer: USB [43164.283922] usb 2-2: SerialNumber: ... [43164.285420] usb-storage 2-2:1.0: USB Mass Storage device detected [43164.286145] scsi host0: usb-storage 2-2:1.0 [43165.312884] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [43165.316463] sd 0:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB) [43165.316839] sd 0:0:0:0: [sda] Write Protect is off [43165.316844] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [43165.317196] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [43165.335232] sda: [43165.335299] sd 0:0:0:0: [sda] Attached SCSI removable disk [43168.556247] exFAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [43178.465864] usb 2-2: USB disconnect, device number 4 [43184.128835] usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd [43184.153404] usb 2-2: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01 [43184.153422] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [43184.153430] usb 2-2: Product: DataTraveler 3.0 [43184.153438] usb 2-2: Manufacturer: Kingston [43184.153445] usb 2-2: SerialNumber: ... [43184.159601] usb-storage 2-2:1.0: USB Mass Storage device detected [43184.160238] scsi host0: usb-storage 2-2:1.0 [43185.217213] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [43185.218628] sd 0:0:0:0: [sda] 30218842 512-byte logical blocks: (15.5 GB/14.4 GiB) [43185.218818] sd 0:0:0:0: [sda] Write Protect is off [43185.218827] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00 [43185.219012] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [43185.243160] sda: [43185.243211] sd 0:0:0:0: [sda] Attached SCSI removable disk [43192.308546] usb 2-2: USB disconnect, device number 5 [43203.142650] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [43204.430445] PM: suspend entry (deep) [43204.505889] Filesystems sync: 0.075 seconds [43204.624918] Freezing user space processes [43204.627649] Freezing user space processes completed (elapsed 0.002 seconds) [43204.627660] OOM killer disabled. [43204.627664] Freezing remaining freezable tasks [43204.628932] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [43204.629009] printk: Suspending console(s) (use no_console_suspend to debug) [43204.984107] ACPI: EC: interrupt blocked [43205.021541] ACPI: PM: Preparing to enter system sleep state S3 [43205.104255] ACPI: EC: event blocked [43205.104263] ACPI: EC: EC stopped [43205.104266] ACPI: PM: Saving platform NVS memory [43205.104701] Disabling non-boot CPUs ... [43205.107564] smpboot: CPU 7 is now offline [43205.112157] smpboot: CPU 6 is now offline [43205.116989] smpboot: CPU 5 is now offline [43205.121148] smpboot: CPU 4 is now offline [43205.125424] smpboot: CPU 3 is now offline [43205.130305] smpboot: CPU 2 is now offline [43205.134992] smpboot: CPU 1 is now offline [43205.137231] ACPI: PM: Low-level resume complete [43205.137261] ACPI: EC: EC started [43205.137262] ACPI: PM: Restoring platform NVS memory [43205.186812] AMD-Vi: Virtual APIC enabled [43205.207216] AMD-Vi: Virtual APIC enabled [43205.207980] Enabling non-boot CPUs ... [43205.208172] smpboot: Booting Node 0 Processor 1 APIC 0x1 [43205.211632] CPU1 is up [43205.211681] smpboot: Booting Node 0 Processor 2 APIC 0x2 [43205.214835] CPU2 is up [43205.214865] smpboot: Booting Node 0 Processor 3 APIC 0x3 [43205.218131] CPU3 is up [43205.218165] smpboot: Booting Node 0 Processor 4 APIC 0x4 [43205.222033] CPU4 is up [43205.222064] smpboot: Booting Node 0 Processor 5 APIC 0x5 [43205.225547] CPU5 is up [43205.225581] smpboot: Booting Node 0 Processor 6 APIC 0x6 [43205.229228] CPU6 is up [43205.229258] smpboot: Booting Node 0 Processor 7 APIC 0x7 [43205.232739] CPU7 is up [43205.233876] ACPI: PM: Waking up from system sleep state S3 [43205.235357] ACPI: EC: interrupt unblocked [43205.245715] ACPI: EC: event unblocked [43205.252473] [drm] PCIE GART of 1024M enabled. [43205.252476] [drm] PTB located at 0x000000F43FC00000 [43205.252499] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [43205.259176] nvme nvme0: D3 entry latency set to 8 seconds [43205.268939] nvme nvme0: 8/0/0 default/read/poll queues [43205.272527] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [43205.385710] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [43205.412921] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [43205.421024] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [43205.421136] amdgpu: restore the fine grain parameters [43205.427064] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [43205.441035] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [43205.441039] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [43205.441042] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [43205.441045] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [43205.441048] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [43205.441052] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [43205.441054] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [43205.441057] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [43205.441060] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [43205.441062] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [43205.441065] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [43205.441067] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [43205.441070] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [43205.441072] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [43205.441075] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [43205.477789] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [43205.535872] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [43205.705003] OOM killer enabled. [43205.705009] Restarting tasks: Starting [43205.705096] usb 3-1: USB disconnect, device number 9 [43205.706943] Restarting tasks: Done [43205.706998] random: crng reseeded on system resumption [43205.709628] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [43205.711354] PM: suspend exit [43205.712587] Bluetooth: hci0: RTL: rom_version status=0 version=3 [43205.712603] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [43205.712688] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [43205.715639] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [43205.827733] usb 3-1: new full-speed USB device number 10 using xhci_hcd [43205.987570] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [43205.987586] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [43205.987591] usb 3-1: Product: Goodix Fingerprint Device [43205.987596] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [43206.187567] Bluetooth: hci0: RTL: fw version 0x2b66d962 [43206.334596] Bluetooth: hci0: AOSP extensions version v1.00 [43206.334606] Bluetooth: hci0: AOSP quality report is supported [43206.334826] Bluetooth: MGMT ver 1.23 [43210.302821] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [43210.462838] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [43210.466271] wlan0: authenticated [43210.466816] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [43210.476043] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=19) [43210.476447] wlan0: associated [43210.552890] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [43217.243100] input: ... (AVRCP) as /devices/virtual/input/input24 [43229.091394] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [43229.315148] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [43229.466708] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [43229.470080] wlan0: authenticated [43229.476124] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [43229.498331] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=4) [43229.498733] wlan0: associated [43229.595419] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [45336.486090] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [45337.642239] PM: suspend entry (deep) [45337.793587] Filesystems sync: 0.151 seconds [45337.799149] Freezing user space processes [45337.801183] Freezing user space processes completed (elapsed 0.002 seconds) [45337.801188] OOM killer disabled. [45337.801190] Freezing remaining freezable tasks [45337.802698] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [45337.802721] printk: Suspending console(s) (use no_console_suspend to debug) [45337.944698] ACPI: EC: interrupt blocked [45337.981295] ACPI: PM: Preparing to enter system sleep state S3 [45338.063586] ACPI: EC: event blocked [45338.063591] ACPI: EC: EC stopped [45338.063595] ACPI: PM: Saving platform NVS memory [45338.063785] Disabling non-boot CPUs ... [45338.065938] smpboot: CPU 7 is now offline [45338.069748] smpboot: CPU 6 is now offline [45338.073484] smpboot: CPU 5 is now offline [45338.077040] smpboot: CPU 4 is now offline [45338.080147] smpboot: CPU 3 is now offline [45338.082524] smpboot: CPU 2 is now offline [45338.086749] smpboot: CPU 1 is now offline [45338.088837] ACPI: PM: Low-level resume complete [45338.088876] ACPI: EC: EC started [45338.088877] ACPI: PM: Restoring platform NVS memory [45338.115822] AMD-Vi: Virtual APIC enabled [45338.138464] AMD-Vi: Virtual APIC enabled [45338.139210] Enabling non-boot CPUs ... [45338.139402] smpboot: Booting Node 0 Processor 1 APIC 0x1 [45338.142800] CPU1 is up [45338.142848] smpboot: Booting Node 0 Processor 2 APIC 0x2 [45338.146018] CPU2 is up [45338.146045] smpboot: Booting Node 0 Processor 3 APIC 0x3 [45338.149395] CPU3 is up [45338.149420] smpboot: Booting Node 0 Processor 4 APIC 0x4 [45338.152762] CPU4 is up [45338.152787] smpboot: Booting Node 0 Processor 5 APIC 0x5 [45338.156227] CPU5 is up [45338.156253] smpboot: Booting Node 0 Processor 6 APIC 0x6 [45338.159734] CPU6 is up [45338.159759] smpboot: Booting Node 0 Processor 7 APIC 0x7 [45338.163219] CPU7 is up [45338.164374] ACPI: PM: Waking up from system sleep state S3 [45338.165794] ACPI: EC: interrupt unblocked [45338.172902] ACPI: EC: event unblocked [45338.180255] [drm] PCIE GART of 1024M enabled. [45338.180258] [drm] PTB located at 0x000000F43FC00000 [45338.180278] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [45338.186945] nvme nvme0: D3 entry latency set to 8 seconds [45338.197111] nvme nvme0: 8/0/0 default/read/poll queues [45338.200307] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [45338.304779] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [45338.332304] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [45338.340410] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [45338.341190] amdgpu: restore the fine grain parameters [45338.346360] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [45338.359629] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [45338.359634] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [45338.359637] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [45338.359640] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [45338.359643] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [45338.359645] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [45338.359648] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [45338.359650] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [45338.359653] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [45338.359655] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [45338.359658] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [45338.359661] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [45338.359663] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [45338.359666] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [45338.359668] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [45338.409071] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [45338.460571] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [45338.628162] OOM killer enabled. [45338.628166] Restarting tasks: Starting [45338.628267] usb 3-1: USB disconnect, device number 10 [45338.629139] Restarting tasks: Done [45338.629176] random: crng reseeded on system resumption [45338.631949] PM: suspend exit [45338.633087] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [45338.636103] Bluetooth: hci0: RTL: rom_version status=0 version=3 [45338.636111] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [45338.645325] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [45338.651183] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [45338.749590] usb 3-1: new full-speed USB device number 11 using xhci_hcd [45338.909111] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [45338.909121] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [45338.909125] usb 3-1: Product: Goodix Fingerprint Device [45338.909129] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [45339.124078] Bluetooth: hci0: RTL: fw version 0x2b66d962 [45339.270074] Bluetooth: hci0: AOSP extensions version v1.00 [45339.270088] Bluetooth: hci0: AOSP quality report is supported [45339.270358] Bluetooth: MGMT ver 1.23 [45343.211491] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [45343.271586] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [45343.275010] wlan0: authenticated [45343.275451] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [45343.300283] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=3) [45343.300707] wlan0: associated [45343.374730] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [45499.014678] input: ... (AVRCP) as /devices/virtual/input/input25 [45774.426256] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [45774.578903] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [45774.582461] wlan0: authenticated [45774.584335] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [45774.588797] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=22) [45774.589206] wlan0: associated [45774.637357] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [46242.237689] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [46242.459933] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [46242.611969] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [46242.618592] wlan0: authenticated [46242.619401] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [46242.625107] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [46242.625520] wlan0: associated [46242.647390] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [48126.577373] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [48126.808179] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [48126.976637] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [48126.980058] wlan0: authenticated [48126.984031] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [48126.997604] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [48126.998076] wlan0: associated [48127.050831] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [48892.224083] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [48892.458694] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [48892.611291] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [48892.614654] wlan0: authenticated [48892.615610] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [48892.625064] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [48892.625572] wlan0: associated [48892.652675] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [49630.833147] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [49631.056697] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [49631.209228] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [49631.212660] wlan0: authenticated [49631.213562] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [49631.219127] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [49631.219522] wlan0: associated [49631.292322] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [49690.693879] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [49690.914642] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [49691.066305] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [49691.069770] wlan0: authenticated [49691.071635] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [49691.079481] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [49691.079974] wlan0: associated [49691.164355] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [49740.026648] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [49740.247879] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [49740.400420] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [49740.403778] wlan0: authenticated [49740.404851] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [49740.410258] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [49740.410658] wlan0: associated [49740.452726] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [49800.068401] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [49800.297188] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [49800.448727] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [49800.455383] wlan0: authenticated [49800.456117] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [49800.472826] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [49800.473497] wlan0: associated [49800.527424] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [50036.211342] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [50036.440986] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [50036.592534] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [50036.595888] wlan0: authenticated [50036.596939] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [50036.618561] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=16) [50036.619066] wlan0: associated [50036.690105] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [50073.186176] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [50073.407076] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [50073.567487] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [50073.570954] wlan0: authenticated [50073.573875] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [50073.580642] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [50073.581183] wlan0: associated [50073.627442] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [50446.446022] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [50446.673845] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [50446.825392] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [50446.828857] wlan0: authenticated [50446.832742] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [50446.836311] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=15) [50446.836986] wlan0: associated [50446.900741] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [50540.589487] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [50540.806923] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [50540.959583] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [50540.962991] wlan0: authenticated [50540.963996] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [50540.986186] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [50540.986598] wlan0: associated [50541.082525] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [50746.645682] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [50746.870389] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [50747.027010] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [50747.137499] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [50747.140836] wlan0: authenticated [50747.142457] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [50747.147357] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [50747.147812] wlan0: associated [50747.237195] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [50817.283942] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [50817.506666] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [50817.659314] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [50817.665912] wlan0: authenticated [50817.666717] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [50817.672452] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [50817.672909] wlan0: associated [50817.767259] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [51086.391980] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [51086.618613] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [51086.771342] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [51086.774718] wlan0: authenticated [51086.779676] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [51086.783132] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=14) [51086.783544] wlan0: associated [51086.793771] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [51158.983911] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [51159.211693] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [51159.363238] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [51159.366639] wlan0: authenticated [51159.367641] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [51159.373148] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [51159.373587] wlan0: associated [51159.474698] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [53483.007641] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [53484.371406] PM: suspend entry (deep) [53484.419162] Filesystems sync: 0.047 seconds [53484.544952] Freezing user space processes [53484.548343] Freezing user space processes completed (elapsed 0.003 seconds) [53484.548354] OOM killer disabled. [53484.548359] Freezing remaining freezable tasks [53484.550028] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [53484.550111] printk: Suspending console(s) (use no_console_suspend to debug) [53484.854022] ACPI: EC: interrupt blocked [53484.891441] ACPI: PM: Preparing to enter system sleep state S3 [53484.974270] ACPI: EC: event blocked [53484.974278] ACPI: EC: EC stopped [53484.974282] ACPI: PM: Saving platform NVS memory [53484.974469] Disabling non-boot CPUs ... [53484.977365] smpboot: CPU 7 is now offline [53484.982107] smpboot: CPU 6 is now offline [53484.986166] smpboot: CPU 5 is now offline [53484.990380] smpboot: CPU 4 is now offline [53484.994514] smpboot: CPU 3 is now offline [53484.998697] smpboot: CPU 2 is now offline [53485.003561] smpboot: CPU 1 is now offline [53485.006095] ACPI: PM: Low-level resume complete [53485.006126] ACPI: EC: EC started [53485.006127] ACPI: PM: Restoring platform NVS memory [53485.053452] AMD-Vi: Virtual APIC enabled [53485.055979] AMD-Vi: Virtual APIC enabled [53485.056743] Enabling non-boot CPUs ... [53485.056933] smpboot: Booting Node 0 Processor 1 APIC 0x1 [53485.060317] CPU1 is up [53485.060365] smpboot: Booting Node 0 Processor 2 APIC 0x2 [53485.063562] CPU2 is up [53485.063589] smpboot: Booting Node 0 Processor 3 APIC 0x3 [53485.066881] CPU3 is up [53485.066908] smpboot: Booting Node 0 Processor 4 APIC 0x4 [53485.070270] CPU4 is up [53485.070295] smpboot: Booting Node 0 Processor 5 APIC 0x5 [53485.073718] CPU5 is up [53485.073749] smpboot: Booting Node 0 Processor 6 APIC 0x6 [53485.077394] CPU6 is up [53485.077436] smpboot: Booting Node 0 Processor 7 APIC 0x7 [53485.080896] CPU7 is up [53485.082042] ACPI: PM: Waking up from system sleep state S3 [53485.083348] ACPI: EC: interrupt unblocked [53485.101082] ACPI: EC: event unblocked [53485.108521] [drm] PCIE GART of 1024M enabled. [53485.108524] [drm] PTB located at 0x000000F43FC00000 [53485.108551] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [53485.115024] nvme nvme0: D3 entry latency set to 8 seconds [53485.124891] nvme nvme0: 8/0/0 default/read/poll queues [53485.128582] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [53485.239500] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [53485.265015] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [53485.273425] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [53485.273862] amdgpu: restore the fine grain parameters [53485.279046] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [53485.292417] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [53485.292421] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [53485.292423] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [53485.292425] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [53485.292427] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [53485.292430] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [53485.292432] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [53485.292434] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [53485.292436] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [53485.292438] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [53485.292440] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [53485.292442] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [53485.292444] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [53485.292446] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [53485.292448] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [53485.333732] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [53485.390065] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [53485.557599] OOM killer enabled. [53485.557603] Restarting tasks: Starting [53485.557699] usb 3-1: USB disconnect, device number 11 [53485.559087] Restarting tasks: Done [53485.559203] random: crng reseeded on system resumption [53485.561969] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [53485.563544] PM: suspend exit [53485.564949] Bluetooth: hci0: RTL: rom_version status=0 version=3 [53485.564959] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [53485.565015] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [53485.567963] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [53485.707562] usb 3-1: new full-speed USB device number 12 using xhci_hcd [53485.866905] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [53485.866918] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [53485.866924] usb 3-1: Product: Goodix Fingerprint Device [53485.866929] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [53486.039995] Bluetooth: hci0: RTL: fw version 0x2b66d962 [53486.185906] Bluetooth: hci0: AOSP extensions version v1.00 [53486.185924] Bluetooth: hci0: AOSP quality report is supported [53486.186465] Bluetooth: MGMT ver 1.23 [53490.204513] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [53490.278552] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [53490.281982] wlan0: authenticated [53490.282429] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [53490.288936] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [53490.289368] wlan0: associated [53490.330650] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [53729.547291] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [53729.765423] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [53729.917747] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [53729.921084] wlan0: authenticated [53729.924860] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [53729.931563] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=16) [53729.932221] wlan0: associated [53730.042792] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [54307.529707] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [54307.747412] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [54307.899012] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [54307.905619] wlan0: authenticated [54307.906374] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [54307.912156] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [54307.912619] wlan0: associated [54307.990574] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [54810.953309] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [54811.177185] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [54811.327762] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [54811.331112] wlan0: authenticated [54811.338125] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [54811.355467] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=17) [54811.355866] wlan0: associated [54811.376827] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [54837.626895] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [54837.942563] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [54838.094190] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [54838.115204] wlan0: authenticated [54838.116580] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [54838.121725] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [54838.122124] wlan0: associated [54838.216615] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [55926.240280] input: ... (AVRCP) as /devices/virtual/input/input26 [56380.557524] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [56380.781517] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [56380.932878] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [56380.936251] wlan0: authenticated [56380.947327] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [56380.954321] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=15) [56380.954744] wlan0: associated [56381.049820] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [56477.522953] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [56477.744408] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [56477.894943] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [56477.898325] wlan0: authenticated [56477.899394] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [56477.918132] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [56477.918508] wlan0: associated [56479.926508] wlan0: Connection to AP XX:XX:XX:XX:XX:XX lost [56481.129062] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [56481.291906] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [56481.295317] wlan0: authenticated [56481.296353] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [56481.301800] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [56481.302159] wlan0: associated [56481.323598] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [56769.510911] st: Version 20160209, fixed bufsize 32768, s/g segs 256