[ 0.000000] microcode: microcode updated early to revision 0xd6, date = 2019-10-03 [ 0.000000] Linux version 5.3.0-29-generic (XXX@XXX) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #31-Ubuntu SMP Fri Jan 17 17:27:26 UTC 2020 (Ubuntu 5.3.0-29.31-generic 5.3.13) [ 0.000000] Command line: BOOT_IMAGE=/BOOT/ubuntu_1eb1kk@/vmlinuz-5.3.0-29-generic root=ZFS=rpool/ROOT/ubuntu_1eb1kk ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a2e98fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a2e99000-0x00000000a2e99fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a2e9a000-0x00000000a2ec3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a2ec4000-0x00000000ad808fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ad809000-0x00000000ad859fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000ad85a000-0x00000000aff73fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aff74000-0x00000000affc3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000affc4000-0x00000000afffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000afffe000-0x00000000afffefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000affff000-0x00000000b7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b8600000-0x00000000bc7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002417fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by Lenovo [ 0.000000] efi: SMBIOS=0xaf055000 ACPI=0xafffd000 ACPI 2.0=0xafffd014 MPS=0xaf51c000 ESRT=0xaeecf000 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO 20FB005WUS/20FB005WUS, BIOS N1FET68W (1.42 ) 03/13/2019 [ 0.000000] tsc: Detected 2800.000 MHz processor [ 0.001933] tsc: Detected 2799.927 MHz TSC [ 0.001933] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001935] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001941] last_pfn = 0x241800 max_arch_pfn = 0x400000000 [ 0.001944] MTRR default type: write-back [ 0.001945] MTRR fixed ranges enabled: [ 0.001946] 00000-9FFFF write-back [ 0.001947] A0000-BFFFF uncachable [ 0.001948] C0000-FFFFF write-protect [ 0.001948] MTRR variable ranges enabled: [ 0.001950] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.001951] 1 base 00BC000000 mask 7FFC000000 uncachable [ 0.001951] 2 base 00BA000000 mask 7FFE000000 uncachable [ 0.001952] 3 disabled [ 0.001952] 4 disabled [ 0.001953] 5 disabled [ 0.001953] 6 disabled [ 0.001954] 7 disabled [ 0.001954] 8 disabled [ 0.001954] 9 disabled [ 0.002315] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002468] last_pfn = 0xaffff max_arch_pfn = 0x400000000 [ 0.010730] esrt: Reserving ESRT space from 0x00000000aeecf000 to 0x00000000aeecf088. [ 0.010738] check: Scanning 1 areas for low memory corruption [ 0.010742] Using GB pages for direct mapping [ 0.010744] BRK [0x18c01000, 0x18c01fff] PGTABLE [ 0.010745] BRK [0x18c02000, 0x18c02fff] PGTABLE [ 0.010746] BRK [0x18c03000, 0x18c03fff] PGTABLE [ 0.010781] BRK [0x18c04000, 0x18c04fff] PGTABLE [ 0.010782] BRK [0x18c05000, 0x18c05fff] PGTABLE [ 0.011084] BRK [0x18c06000, 0x18c06fff] PGTABLE [ 0.011142] BRK [0x18c07000, 0x18c07fff] PGTABLE [ 0.011188] RAMDISK: [mem 0x31f09000-0x34f7bfff] [ 0.011198] ACPI: Early table checksum verification disabled [ 0.011201] ACPI: RSDP 0x00000000AFFFD014 000024 (v02 LENOVO) [ 0.011204] ACPI: XSDT 0x00000000AFFCE188 0000F4 (v01 LENOVO TP-N1F 00000000 PTEC 00000002) [ 0.011209] ACPI: FACP 0x00000000AFFF1000 0000F4 (v05 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011214] ACPI: DSDT 0x00000000AFFD9000 0131D3 (v02 LENOVO TP-N1F 00001420 INTL 20141107) [ 0.011217] ACPI: FACS 0x00000000AFF8E000 000040 [ 0.011219] ACPI: TCPA 0x00000000AFFFB000 000032 (v02 LENOVO TP-N1F 00000002 PTEC 00000002) [ 0.011221] ACPI: SSDT 0x00000000AFFFA000 0004B7 (v02 LENOVO Tpm2Tabl 00001000 INTL 20141107) [ 0.011224] ACPI: SSDT 0x00000000AFFF9000 00004B (v02 LENOVO MeSsdt 00003000 INTL 20141107) [ 0.011227] ACPI: TPM2 0x00000000AFFF8000 000034 (v03 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011229] ACPI: UEFI 0x00000000AFFA5000 000042 (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011231] ACPI: SSDT 0x00000000AFFF3000 004E0A (v02 LENOVO SaSsdt 00003000 INTL 20141107) [ 0.011234] ACPI: SSDT 0x00000000AFFF2000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107) [ 0.011236] ACPI: ECDT 0x00000000AFFF0000 000052 (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011239] ACPI: HPET 0x00000000AFFEF000 000038 (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011241] ACPI: APIC 0x00000000AFFEE000 0000BC (v03 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011244] ACPI: MCFG 0x00000000AFFED000 00003C (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011246] ACPI: SSDT 0x00000000AFFD7000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107) [ 0.011249] ACPI: SSDT 0x00000000AFFD6000 000264 (v02 LENOVO sensrhub 00000000 INTL 20141107) [ 0.011251] ACPI: DBGP 0x00000000AFFD5000 000034 (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011254] ACPI: DBG2 0x00000000AFFD4000 000054 (v00 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011256] ACPI: BOOT 0x00000000AFFD3000 000028 (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011258] ACPI: BATB 0x00000000AFFD2000 00004A (v02 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011261] ACPI: SLIC 0x00000000AFFD1000 000176 (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011263] ACPI: SSDT 0x00000000AFFD0000 000E73 (v02 LENOVO CpuSsdt 00003000 INTL 20141107) [ 0.011266] ACPI: SSDT 0x00000000AFFCF000 000403 (v02 LENOVO CtdpB 00001000 INTL 20141107) [ 0.011268] ACPI: MSDM 0x00000000AFFFC000 000055 (v03 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011271] ACPI: DMAR 0x00000000AFFCD000 0000A8 (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011273] ACPI: ASF! 0x00000000AFFCC000 0000A5 (v32 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011276] ACPI: FPDT 0x00000000AFFCB000 000044 (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011278] ACPI: UEFI 0x00000000AFF8C000 00013E (v01 LENOVO TP-N1F 00001420 PTEC 00000002) [ 0.011286] ACPI: DMI detected: Lenovo ThinkPad X1 Carbon [ 0.011288] ACPI: Local APIC address 0xfee00000 [ 0.011463] No NUMA configuration found [ 0.011464] Faking a node at [mem 0x0000000000000000-0x00000002417fffff] [ 0.011475] NODE_DATA(0) allocated [mem 0x2417d3000-0x2417fdfff] [ 0.011676] Zone ranges: [ 0.011677] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011678] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011679] Normal [mem 0x0000000100000000-0x00000002417fffff] [ 0.011680] Device empty [ 0.011681] Movable zone start for each node [ 0.011684] Early memory node ranges [ 0.011685] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.011685] node 0: [mem 0x0000000000059000-0x000000000008bfff] [ 0.011686] node 0: [mem 0x0000000000100000-0x00000000a2e98fff] [ 0.011687] node 0: [mem 0x00000000a2ec4000-0x00000000ad808fff] [ 0.011688] node 0: [mem 0x00000000afffe000-0x00000000afffefff] [ 0.011688] node 0: [mem 0x0000000100000000-0x00000002417fffff] [ 0.011778] Zeroed struct page in unavailable ranges: 10391 pages [ 0.011780] Initmem setup node 0 [mem 0x0000000000001000-0x00000002417fffff] [ 0.011781] On node 0 totalpages: 2027369 [ 0.011782] DMA zone: 64 pages used for memmap [ 0.011782] DMA zone: 72 pages reserved [ 0.011783] DMA zone: 3978 pages, LIFO batch:0 [ 0.011833] DMA32 zone: 11040 pages used for memmap [ 0.011834] DMA32 zone: 706527 pages, LIFO batch:63 [ 0.022299] Normal zone: 20576 pages used for memmap [ 0.022299] Normal zone: 1316864 pages, LIFO batch:63 [ 0.037982] Reserving Intel graphics memory at [mem 0xba800000-0xbc7fffff] [ 0.038126] ACPI: PM-Timer IO Port: 0x1808 [ 0.038127] ACPI: Local APIC address 0xfee00000 [ 0.038133] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.038134] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.038134] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.038135] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.038135] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.038136] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.038136] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.038137] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.038163] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.038165] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.038166] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.038168] ACPI: IRQ0 used by override. [ 0.038168] ACPI: IRQ9 used by override. [ 0.038170] Using ACPI (MADT) for SMP configuration information [ 0.038171] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.038174] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.038192] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.038194] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.038195] PM: Registered nosave memory: [mem 0x0008c000-0x000fffff] [ 0.038197] PM: Registered nosave memory: [mem 0xa2e99000-0xa2e99fff] [ 0.038198] PM: Registered nosave memory: [mem 0xa2e9a000-0xa2ec3fff] [ 0.038199] PM: Registered nosave memory: [mem 0xad809000-0xad859fff] [ 0.038199] PM: Registered nosave memory: [mem 0xad85a000-0xaff73fff] [ 0.038200] PM: Registered nosave memory: [mem 0xaff74000-0xaffc3fff] [ 0.038200] PM: Registered nosave memory: [mem 0xaffc4000-0xafffdfff] [ 0.038202] PM: Registered nosave memory: [mem 0xaffff000-0xb7ffffff] [ 0.038203] PM: Registered nosave memory: [mem 0xb8000000-0xb85fffff] [ 0.038203] PM: Registered nosave memory: [mem 0xb8600000-0xbc7fffff] [ 0.038204] PM: Registered nosave memory: [mem 0xbc800000-0xf80f9fff] [ 0.038204] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff] [ 0.038205] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff] [ 0.038205] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff] [ 0.038206] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff] [ 0.038206] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.038207] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff] [ 0.038208] [mem 0xbc800000-0xf80f9fff] available for PCI devices [ 0.038209] Booting paravirtualized kernel on bare hardware [ 0.038212] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.038217] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.038354] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.038360] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.038361] pcpu-alloc: [0] 0 1 2 3 [ 0.038386] Built 1 zonelists, mobility grouping on. Total pages: 1995617 [ 0.038387] Policy zone: Normal [ 0.038388] Kernel command line: BOOT_IMAGE=/BOOT/ubuntu_1eb1kk@/vmlinuz-5.3.0-29-generic root=ZFS=rpool/ROOT/ubuntu_1eb1kk ro quiet splash vt.handoff=1 [ 0.038845] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.039032] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.039076] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.042003] Calgary: detecting Calgary via BIOS EBDA area [ 0.042004] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.058568] Memory: 7719540K/8109476K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 389936K reserved, 0K cma-reserved) [ 0.058680] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.058690] Kernel/User page tables isolation: enabled [ 0.058702] ftrace: allocating 43225 entries in 169 pages [ 0.074939] rcu: Hierarchical RCU implementation. [ 0.074941] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.074941] Tasks RCU enabled. [ 0.074942] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.074943] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.077910] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.078247] random: crng done (trusting CPU's manufacturer) [ 0.078275] vt handoff: transparent VT on vt#1 [ 0.078282] Console: colour dummy device 80x25 [ 0.078285] printk: console [tty0] enabled [ 0.078299] ACPI: Core revision 20190703 [ 0.078550] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.078617] APIC: Switch to symmetric I/O mode setup [ 0.078619] DMAR: Host address width 39 [ 0.078620] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.078625] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.078626] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.078629] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.078630] DMAR: RMRR base: 0x000000af51f000 end: 0x000000af53efff [ 0.078631] DMAR: RMRR base: 0x000000ba000000 end: 0x000000bc7fffff [ 0.078632] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.078633] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.078633] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.078634] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.080152] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.080152] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.084210] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.102659] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285bfbafad2, max_idle_ns: 440795215530 ns [ 0.102664] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.85 BogoMIPS (lpj=11199708) [ 0.102666] pid_max: default: 32768 minimum: 301 [ 0.106049] LSM: Security Framework initializing [ 0.106058] Yama: becoming mindful. [ 0.106083] AppArmor: AppArmor initialized [ 0.106123] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.106135] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.106287] *** VALIDATE proc *** [ 0.106327] *** VALIDATE cgroup1 *** [ 0.106328] *** VALIDATE cgroup2 *** [ 0.106376] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.106391] process: using mwait in idle threads [ 0.106393] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.106394] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.106396] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.106397] Spectre V2 : Mitigation: Full generic retpoline [ 0.106398] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.106398] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.106399] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.106400] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.106401] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.106404] MDS: Mitigation: Clear CPU buffers [ 0.106404] TAA: Mitigation: Clear CPU buffers [ 0.106650] Freeing SMP alternatives memory: 36K [ 0.109610] TSC deadline timer enabled [ 0.109615] smpboot: CPU0: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.109708] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.109713] ... version: 4 [ 0.109713] ... bit width: 48 [ 0.109714] ... generic registers: 4 [ 0.109714] ... value mask: 0000ffffffffffff [ 0.109715] ... max period: 00007fffffffffff [ 0.109715] ... fixed-purpose events: 3 [ 0.109716] ... event mask: 000000070000000f [ 0.109752] rcu: Hierarchical SRCU implementation. [ 0.110572] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.110621] smp: Bringing up secondary CPUs ... [ 0.110661] x86: Booting SMP configuration: [ 0.110661] .... node #0, CPUs: #1 #2 [ 0.110661] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.110661] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.110661] #3 [ 0.111331] smp: Brought up 1 node, 4 CPUs [ 0.111331] smpboot: Max logical packages: 1 [ 0.111331] smpboot: Total of 4 processors activated (22399.41 BogoMIPS) [ 0.112199] devtmpfs: initialized [ 0.112199] x86/mm: Memory block size: 128MB [ 0.112199] PM: Registering ACPI NVS region [mem 0xa2e99000-0xa2e99fff] (4096 bytes) [ 0.112199] PM: Registering ACPI NVS region [mem 0xaff74000-0xaffc3fff] (327680 bytes) [ 0.112199] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.112199] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.112199] pinctrl core: initialized pinctrl subsystem [ 0.112199] PM: RTC time: 04:43:25, date: 2020-02-23 [ 0.112199] NET: Registered protocol family 16 [ 0.112199] EISA bus registered [ 0.112199] cpuidle: using governor ladder [ 0.112199] cpuidle: using governor menu [ 0.112199] Simple Boot Flag at 0x47 set to 0x1 [ 0.112199] KVM setup pv remote TLB flush [ 0.112199] ACPI: bus type PCI registered [ 0.112199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.114827] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.114838] PCI: not using MMCONFIG [ 0.114839] PCI: Using configuration type 1 for base access [ 0.115162] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.115870] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.115870] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.118747] ACPI: Added _OSI(Module Device) [ 0.118748] ACPI: Added _OSI(Processor Device) [ 0.118748] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.118749] ACPI: Added _OSI(Processor Aggregator Device) [ 0.118750] ACPI: Added _OSI(Linux-Dell-Video) [ 0.118751] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.118751] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.118752] ACPI: Deleted _OSI(Windows 2012) [ 0.154279] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.155418] ACPI: EC: EC started [ 0.155419] ACPI: EC: interrupt blocked [ 0.156965] ACPI: \: Used as first EC [ 0.156965] ACPI: \: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.156965] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.156965] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.163423] ACPI: Dynamic OEM Table Load: [ 0.163435] ACPI: SSDT 0xFFFF924A37E5E800 00070F (v02 PmRef Cpu0Ist 00003000 INTL 20141107) [ 0.164603] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.165384] ACPI: Dynamic OEM Table Load: [ 0.165389] ACPI: SSDT 0xFFFF924A37E3CF00 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20141107) [ 0.166276] ACPI: Dynamic OEM Table Load: [ 0.166280] ACPI: SSDT 0xFFFF924A378AFE00 000130 (v02 PmRef HwpLvt 00003000 INTL 20141107) [ 0.167689] ACPI: Dynamic OEM Table Load: [ 0.167695] ACPI: SSDT 0xFFFF924A37E5B800 0005AA (v02 PmRef ApIst 00003000 INTL 20141107) [ 0.168965] ACPI: Dynamic OEM Table Load: [ 0.168970] ACPI: SSDT 0xFFFF924A378AE800 000119 (v02 PmRef ApHwp 00003000 INTL 20141107) [ 0.171103] ACPI: Interpreter enabled [ 0.171141] ACPI: (supports S0 S3 S4 S5) [ 0.171142] ACPI: Using IOAPIC for interrupt routing [ 0.171167] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.171587] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.171593] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.171841] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.174683] ACPI: Power Resource [PUBS] (on) [ 0.174967] ACPI: Power Resource [PG00] (on) [ 0.175068] ACPI: Power Resource [PG01] (on) [ 0.175159] ACPI: Power Resource [PG02] (on) [ 0.176738] ACPI: Power Resource [WRST] (off) [ 0.176881] ACPI: Power Resource [WRST] (off) [ 0.200999] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.201082] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.201165] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.201245] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.201325] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.201405] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.201484] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.201563] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.201646] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.201651] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.201753] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.201799] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.201800] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.201801] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.201802] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.201966] PCI host bridge to bus 0000:00 [ 0.201968] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.201969] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.201969] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.201970] pci_bus 0000:00: root bus resource [mem 0xbc800000-0xfebfffff window] [ 0.201971] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.201979] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.202054] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.202062] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] [ 0.202066] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.202069] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f] [ 0.202081] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.202173] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.202183] pci 0000:00:08.0: reg 0x10: [mem 0xe124a000-0xe124afff 64bit] [ 0.202283] pci 0000:00:13.0: [8086:9d35] type 00 class 0x000000 [ 0.202304] pci 0000:00:13.0: reg 0x10: [mem 0xe124b000-0xe124bfff 64bit] [ 0.202404] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.202423] pci 0000:00:14.0: reg 0x10: [mem 0xe1220000-0xe122ffff 64bit] [ 0.202483] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.202643] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.202664] pci 0000:00:14.2: reg 0x10: [mem 0xe124c000-0xe124cfff 64bit] [ 0.202788] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.202812] pci 0000:00:16.0: reg 0x10: [mem 0xe124d000-0xe124dfff 64bit] [ 0.202880] pci 0000:00:16.0: PME# supported from D3hot [ 0.203019] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.203035] pci 0000:00:17.0: reg 0x10: [mem 0xe1248000-0xe1249fff] [ 0.203042] pci 0000:00:17.0: reg 0x14: [mem 0xe1250000-0xe12500ff] [ 0.203048] pci 0000:00:17.0: reg 0x18: [io 0xe080-0xe087] [ 0.203055] pci 0000:00:17.0: reg 0x1c: [io 0xe088-0xe08b] [ 0.203061] pci 0000:00:17.0: reg 0x20: [io 0xe060-0xe07f] [ 0.203068] pci 0000:00:17.0: reg 0x24: [mem 0xe124e000-0xe124e7ff] [ 0.203105] pci 0000:00:17.0: PME# supported from D3hot [ 0.203231] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.203300] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.203432] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400 [ 0.203501] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.203656] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.203873] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.203886] pci 0000:00:1f.2: reg 0x10: [mem 0xe1244000-0xe1247fff] [ 0.204034] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.204060] pci 0000:00:1f.3: reg 0x10: [mem 0xe1240000-0xe1243fff 64bit] [ 0.204090] pci 0000:00:1f.3: reg 0x20: [mem 0xe1230000-0xe123ffff 64bit] [ 0.204136] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.204265] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.204319] pci 0000:00:1f.4: reg 0x10: [mem 0xe124f000-0xe124f0ff 64bit] [ 0.204370] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.204544] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000 [ 0.204565] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff] [ 0.204651] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.204814] pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000 [ 0.204842] pci 0000:02:00.0: reg 0x14: [mem 0xe1100000-0xe1100fff] [ 0.204944] pci 0000:02:00.0: supports D1 D2 [ 0.204944] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.205053] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.205056] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] [ 0.205376] pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000 [ 0.205424] pci 0000:04:00.0: reg 0x10: [mem 0xe1000000-0xe1001fff 64bit] [ 0.205641] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.206241] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.206244] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe10fffff] [ 0.207709] ACPI: EC: interrupt unblocked [ 0.207728] ACPI: EC: event unblocked [ 0.207741] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.207742] ACPI: \_SB_.PCI0.LPC_.EC__: Boot DSDT EC used to handle transactions and events [ 0.207788] SCSI subsystem initialized [ 0.207788] libata version 3.00 loaded. [ 0.207788] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.207788] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.207788] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.207788] vgaarb: loaded [ 0.207788] ACPI: bus type USB registered [ 0.207788] usbcore: registered new interface driver usbfs [ 0.207788] usbcore: registered new interface driver hub [ 0.207788] usbcore: registered new device driver usb [ 0.207788] pps_core: LinuxPPS API ver. 1 registered [ 0.207788] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.207788] PTP clock support registered [ 0.207788] EDAC MC: Ver: 3.0.0 [ 0.207788] Registered efivars operations [ 0.207788] PCI: Using ACPI for IRQ routing [ 0.213013] PCI: pci_cache_line_size set to 64 bytes [ 0.213581] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.213582] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff] [ 0.213583] e820: reserve RAM buffer [mem 0xa2e99000-0xa3ffffff] [ 0.213583] e820: reserve RAM buffer [mem 0xad809000-0xafffffff] [ 0.213584] e820: reserve RAM buffer [mem 0xaffff000-0xafffffff] [ 0.213585] e820: reserve RAM buffer [mem 0x241800000-0x243ffffff] [ 0.214662] NetLabel: Initializing [ 0.214662] NetLabel: domain hash size = 128 [ 0.214662] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.214662] NetLabel: unlabeled traffic allowed by default [ 0.215165] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.215168] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.219687] clocksource: Switched to clocksource tsc-early [ 0.227634] VFS: Disk quotas dquot_6.6.0 [ 0.227645] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.227666] *** VALIDATE hugetlbfs *** [ 0.227726] AppArmor: AppArmor Filesystem Enabled [ 0.227748] pnp: PnP ACPI init [ 0.228256] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.228257] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.228258] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.228259] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.228260] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.228261] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.228261] system 00:00: [mem 0x000d4000-0x000d7fff] could not be reserved [ 0.228262] system 00:00: [mem 0x000d8000-0x000dbfff] could not be reserved [ 0.228263] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.228264] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.228265] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.228265] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.228266] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.228267] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.228268] system 00:00: [mem 0x00100000-0xbc7fffff] could not be reserved [ 0.228269] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.228270] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.228274] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.228374] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.228376] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.228377] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.228377] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.228378] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.228379] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.228380] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.228381] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.228382] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.228382] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.228383] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.228384] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.228385] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.228386] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.228387] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.228388] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.228389] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved [ 0.228390] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.228391] system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.228392] system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved [ 0.228394] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.228451] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.228465] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.228477] pnp 00:04: Plug and Play ACPI device, IDs LEN0058 PNP0f13 (active) [ 0.228506] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.228508] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.229256] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.229257] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.229258] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.229259] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.229259] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.229260] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.229261] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.229264] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229531] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.229533] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229646] pnp: PnP ACPI: found 8 devices [ 0.230581] thermal_sys: Registered thermal governor 'fair_share' [ 0.230582] thermal_sys: Registered thermal governor 'bang_bang' [ 0.230582] thermal_sys: Registered thermal governor 'step_wise' [ 0.230583] thermal_sys: Registered thermal governor 'user_space' [ 0.230583] thermal_sys: Registered thermal governor 'power_allocator' [ 0.235074] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.235099] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.235103] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] [ 0.235108] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.235110] pci 0000:00:1c.2: bridge window [mem 0xe1000000-0xe10fffff] [ 0.235115] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.235116] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.235117] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.235118] pci_bus 0000:00: resource 7 [mem 0xbc800000-0xfebfffff window] [ 0.235119] pci_bus 0000:02: resource 1 [mem 0xe1100000-0xe11fffff] [ 0.235120] pci_bus 0000:04: resource 1 [mem 0xe1000000-0xe10fffff] [ 0.235202] NET: Registered protocol family 2 [ 0.235328] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.235360] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.235452] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.235519] TCP: Hash tables configured (established 65536 bind 65536) [ 0.235543] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.235561] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.235615] NET: Registered protocol family 1 [ 0.235618] NET: Registered protocol family 44 [ 0.235626] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.236112] PCI: CLS 0 bytes, default 64 [ 0.236143] Trying to unpack rootfs image as initramfs... [ 0.328341] Freeing initrd memory: 49612K [ 0.346677] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.346679] software IO TLB: mapped [mem 0x9d1f6000-0xa11f6000] (64MB) [ 0.346738] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff] [ 0.346741] caller snb_uncore_imc_init_box+0x6c/0xb0 mapping multiple BARs [ 0.346837] check: Scanning for low memory corruption every 60 seconds [ 0.348281] Initialise system trusted keyrings [ 0.348287] Key type blacklist registered [ 0.348308] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.349251] zbud: loaded [ 0.349517] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.349622] fuse: init (API version 7.31) [ 0.349695] Platform Keyring initialized [ 0.353248] Key type asymmetric registered [ 0.353249] Asymmetric key parser 'x509' registered [ 0.353255] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.353281] io scheduler mq-deadline registered [ 0.353710] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.353758] efifb: probing for efifb [ 0.353774] efifb: No BGRT, not showing boot graphics [ 0.353774] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k [ 0.353775] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.353775] efifb: scrolling: redraw [ 0.353776] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.353806] fbcon: Deferring console take-over [ 0.353807] fb0: EFI VGA frame buffer device [ 0.353812] intel_idle: MWAIT substates: 0x11142120 [ 0.353813] intel_idle: v0.4.1 model 0x4E [ 0.353969] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.354468] ACPI: AC Adapter [AC] (on-line) [ 0.354512] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.354520] ACPI: Lid Switch [LID] [ 0.354541] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.354546] ACPI: Sleep Button [SLPB] [ 0.354576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.354580] ACPI: Power Button [PWRF] [ 0.358528] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.358529] ACPI: Thermal Zone [THM0] (35 C) [ 0.358659] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.360107] Linux agpgart interface v0.103 [ 0.383236] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.441803] loop: module loaded [ 0.442064] libphy: Fixed MDIO Bus: probed [ 0.442065] tun: Universal TUN/TAP device driver, 1.6 [ 0.442121] PPP generic driver version 2.4.2 [ 0.442186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.442188] ehci-pci: EHCI PCI platform driver [ 0.442200] ehci-platform: EHCI generic platform driver [ 0.442211] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.442213] ohci-pci: OHCI PCI platform driver [ 0.442221] ohci-platform: OHCI generic platform driver [ 0.442228] uhci_hcd: USB Universal Host Controller Interface driver [ 0.442434] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.442440] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.443512] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 0.443517] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.443703] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.443705] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.443706] usb usb1: Product: xHCI Host Controller [ 0.443707] usb usb1: Manufacturer: Linux 5.3.0-29-generic xhci-hcd [ 0.443708] usb usb1: SerialNumber: ... [ 0.443852] hub 1-0:1.0: USB hub found [ 0.443870] hub 1-0:1.0: 12 ports detected [ 0.445295] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.445299] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.445302] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.445347] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.445349] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.445350] usb usb2: Product: xHCI Host Controller [ 0.445351] usb usb2: Manufacturer: Linux 5.3.0-29-generic xhci-hcd [ 0.445353] usb usb2: SerialNumber: ... [ 0.445498] hub 2-0:1.0: USB hub found [ 0.445510] hub 2-0:1.0: 6 ports detected [ 0.445973] usb: port power management may be unreliable [ 0.446545] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.448527] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.448532] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.448744] mousedev: PS/2 mouse device common for all mice [ 0.449092] rtc_cmos 00:02: RTC can wake from S4 [ 0.449655] rtc_cmos 00:02: registered as rtc0 [ 0.449672] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.449680] i2c /dev entries driver [ 0.449749] device-mapper: uevent: version 1.0.3 [ 0.449820] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: XXX@XXX [ 0.449845] platform eisa.0: Probing EISA bus 0 [ 0.449851] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.449853] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.449854] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.449855] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.449856] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.449858] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.449859] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.449860] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.449861] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.449863] platform eisa.0: EISA: Detected 0 cards [ 0.449867] intel_pstate: Intel P-state driver initializing [ 0.450251] intel_pstate: HWP enabled [ 0.450297] ledtrig-cpu: registered to indicate activity on CPUs [ 0.450299] EFI Variables Facility v0.08 2004-May-17 [ 0.450733] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.489698] intel_pmc_core intel_pmc_core.0: initialized [ 0.489844] NET: Registered protocol family 10 [ 0.496038] Segment Routing with IPv6 [ 0.496057] NET: Registered protocol family 17 [ 0.496083] Key type dns_resolver registered [ 0.496395] RAS: Correctable Errors collector initialized. [ 0.496474] microcode: sig=0x406e3, pf=0x80, revision=0xd6 [ 0.496503] microcode: Microcode Update Driver: v2.2. [ 0.496511] sched_clock: Marking stable (496041800, 458620)->(501851731, -5351311) [ 0.496607] registered taskstats version 1 [ 0.496616] Loading compiled-in X.509 certificates [ 0.498111] Loaded X.509 cert 'Build time autogenerated kernel key: e010219b5d6ca0f28448e71ca03baad031d32c9b' [ 0.498131] zswap: loaded using pool lzo/zbud [ 0.504575] Key type big_key registered [ 0.504594] Key type trusted registered [ 0.508358] Key type encrypted registered [ 0.508361] AppArmor: AppArmor sha1 policy hashing enabled [ 0.509365] integrity: Loading X.509 certificate: UEFI:db [ 0.509420] integrity: Loaded X.509 cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' [ 0.509420] integrity: Loading X.509 certificate: UEFI:db [ 0.509431] integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' [ 0.509432] integrity: Loading X.509 certificate: UEFI:db [ 0.509446] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.509446] integrity: Loading X.509 certificate: UEFI:db [ 0.509459] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.510564] ima: Allocated hash algorithm: sha1 [ 0.666903] No architecture policies found [ 0.666938] evm: Initialising EVM extended attributes: [ 0.666939] evm: security.selinux [ 0.666939] evm: security.SMACK64 [ 0.666939] evm: security.SMACK64EXEC [ 0.666940] evm: security.SMACK64TRANSMUTE [ 0.666940] evm: security.SMACK64MMAP [ 0.666940] evm: security.apparmor [ 0.666941] evm: security.ima [ 0.666941] evm: security.capability [ 0.666942] evm: HMAC attrs: 0x1 [ 0.667764] PM: Magic number: 8:808:717 [ 0.667949] rtc_cmos 00:02: setting system clock to 2020-02-23T04:43:25 UTC (1582433005) [ 0.669080] Freeing unused decrypted memory: 2040K [ 0.669458] Freeing unused kernel image memory: 2668K [ 0.669515] Write protecting the kernel read-only data: 22528k [ 0.669907] Freeing unused kernel image memory: 2008K [ 0.670083] Freeing unused kernel image memory: 1416K [ 0.677633] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.677633] x86/mm: Checking user space page tables [ 0.685058] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.685060] Run /init as init process [ 0.754999] acpi PNP0C14:01: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:00) [ 0.755099] acpi PNP0C14:02: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:00) [ 0.755175] acpi PNP0C14:03: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:00) [ 0.768556] intel_ish_ipc 0000:00:13.0: enabling device (0000 -> 0002) [ 0.770594] ahci 0000:00:17.0: version 3.0 [ 0.771018] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 0.771134] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.771174] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.771221] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002) [ 0.772399] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.772400] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.772915] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.778684] usb 1-7: new full-speed USB device number 2 using xhci_hcd [ 0.782916] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode [ 0.782918] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 0.787611] scsi host0: ahci [ 0.789061] scsi host1: ahci [ 0.789106] ata1: DUMMY [ 0.789108] ata2: SATA max UDMA/133 abar m2048@0xe124e000 port 0xe124e180 irq 125 [ 0.904181] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 0.932454] usb 1-7: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping [ 0.932455] usb 1-7: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping [ 0.932457] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01 [ 0.932458] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.979155] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 0.979158] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 0.979206] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF [ 0.983613] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.058919] usb 1-8: new high-speed USB device number 3 using xhci_hcd [ 1.106945] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.110165] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 1.110167] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 1.110235] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 1.110351] ata2.00: supports DRM functions and may not be fully accessible [ 1.110373] ata2.00: ATA-9: LITEON L8H-256V2G, 3887902, max UDMA/133 [ 1.110373] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.111308] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 1.111309] ata2.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 1.111406] ata2.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 1.111699] ata2.00: supports DRM functions and may not be fully accessible [ 1.112768] ata2.00: configured for UDMA/133 [ 1.123394] scsi 1:0:0:0: Direct-Access ATA LITEON L8H-256V2 902 PQ: 0 ANSI: 5 [ 1.123778] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.124002] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.124083] sd 1:0:0:0: [sda] Write Protect is off [ 1.124084] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.124247] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.126380] sda: sda1 sda2 sda3 sda4 sda5 [ 1.126723] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.217494] usb 1-8: New USB device found, idVendor=04ca, idProduct=705a, bcdDevice= 0.11 [ 1.217495] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.217496] usb 1-8: Product: Integrated Camera [ 1.217497] usb 1-8: Manufacturer: 8SSC20F26978L1GZ5CK0109 [ 1.346921] usb 1-9: new full-speed USB device number 4 using xhci_hcd [ 1.358979] tsc: Refined TSC clocksource calibration: 2808.009 MHz [ 1.358983] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879ce56af2, max_idle_ns: 440795206607 ns [ 1.359118] clocksource: Switched to clocksource tsc [ 1.395136] hidraw: raw HID events driver (C) Jiri Kosina [ 1.397063] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 1.403638] hid-generic 001F:8086:0001.0001: hidraw0: <UNKNOWN> HID v2.00 Device [hid-ishtp 8086:0001] on [ 1.403798] hid-generic 001F:0000:0000.0002: hidraw1: <UNKNOWN> HID v2.00 Device [hid-ishtp 0000:0000] on [ 1.500788] usb 1-9: New USB device found, idVendor=138a, idProduct=0090, bcdDevice= 1.64 [ 1.500789] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.500790] usb 1-9: SerialNumber: ... [ 1.536625] spl: loading out-of-tree module taints kernel. [ 1.538684] znvpair: module license 'CDDL' taints kernel. [ 1.538685] Disabling lock debugging due to kernel taint [ 1.545085] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4754] [ 1.575356] psmouse serio1: synaptics: queried min coordinates: x [1262..], y [1098..] [ 1.575360] psmouse serio1: synaptics: Your touchpad (PNP: LEN0058 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 1.633913] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf002a3/0x940300/0x12e800/0x0, board id: 3144, fw id: 2059155 [ 1.633917] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.671715] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.340440] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 2.419259] ZFS: Loaded module v0.8.1-1ubuntu14.3, ZFS pool version 5000, ZFS filesystem version 5 [ 2.541172] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 [ 2.980067] systemd[1]: Inserted module 'autofs4' [ 3.080057] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 3.099048] systemd[1]: Detected architecture x86-64. [ 3.101280] systemd[1]: Set hostname to ... [ 3.101648] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 3.525283] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 3.580002] systemd[1]: Reached target Remote File Systems. [ 3.580142] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.580799] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.581101] systemd[1]: Listening on udev Kernel Socket. [ 3.581109] systemd[1]: Reached target User and Group Name Lookups. [ 3.620650] lp: driver loaded but no devices found [ 3.643386] ppdev: user-space parallel port driver [ 3.985742] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.118908] Non-volatile memory driver v1.3 [ 4.167429] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 4.167431] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.167432] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.167432] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.167433] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.167433] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.176802] mc: Linux media interface: v0.10 [ 4.177807] acer_wmi: Acer Laptop ACPI-WMI Extras [ 4.180335] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.188257] cryptd: max_cpu_qlen set to 1000 [ 4.197115] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.219969] checking generic (c0000000 7f0000) vs hw (c0000000 20000000) [ 4.219970] fb0: switching to inteldrmfb from EFI VGA [ 4.220402] Bluetooth: Core ver 2.22 [ 4.220416] NET: Registered protocol family 31 [ 4.220417] Bluetooth: HCI device and connection manager initialized [ 4.220420] Bluetooth: HCI socket layer initialized [ 4.220421] Bluetooth: L2CAP socket layer initialized [ 4.220424] Bluetooth: SCO socket layer initialized [ 4.220438] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.221822] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.221822] [drm] Driver supports precise vblank timestamp query. [ 4.222382] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.224330] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 4.239203] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 4.239204] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.239205] thinkpad_acpi: ThinkPad BIOS N1FET68W (1.42 ), EC N1FHT35W [ 4.239205] thinkpad_acpi: Lenovo ThinkPad X1 Carbon 4th, model 20FB005WUS [ 4.243783] thinkpad_acpi: radio switch found; radios are enabled [ 4.244470] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.244471] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.262717] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 4.270848] usbcore: registered new interface driver btusb [ 4.272566] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.272765] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 4.273809] videodev: Linux video capture interface: v2.00 [ 4.274602] Intel(R) Wireless WiFi driver for Linux [ 4.274602] Copyright(c) 2003- 2015 Intel Corporation [ 4.275068] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002) [ 4.277516] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 4.277718] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 4.279807] AVX2 version of gcm_enc/dec engaged. [ 4.279807] AES CTR mode by8 optimization enabled [ 4.283481] Bluetooth: hci0: Device revision is 5 [ 4.283483] Bluetooth: hci0: Secure boot is enabled [ 4.283483] Bluetooth: hci0: OTP lock is enabled [ 4.283484] Bluetooth: hci0: API lock is enabled [ 4.283485] Bluetooth: hci0: Debug lock is disabled [ 4.283486] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 4.287519] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 4.287875] iwlwifi 0000:04:00.0: Found debug destination: EXTERNAL_DRAM [ 4.287876] iwlwifi 0000:04:00.0: Found debug configuration: 0 [ 4.288466] iwlwifi 0000:04:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm [ 4.290948] fbcon: i915drmfb (fb0) is primary device [ 4.290949] fbcon: Deferring console take-over [ 4.290953] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 4.291171] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.302613] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 4.334570] snd_hda_codec_conexant hdaudioC0D0: CX20753/4: BIOS auto-probing. [ 4.335028] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20753/4: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 4.335030] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.335031] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 4.335032] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 4.335032] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 4.335033] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 4.335034] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 4.341100] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:705a) [ 4.346308] thinkpad_acpi: battery 1 registered (start 0, stop 100) [ 4.346315] battery: new extension: ThinkPad Battery Extension [ 4.346359] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 4.347246] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208 [ 4.355912] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 4.356396] iwlwifi 0000:04:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 4.366446] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 4.366524] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 4.366577] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 4.366624] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 4.367113] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 4.367163] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 4.367229] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 4.368780] Bluetooth: hci0: Failed to send firmware data (-38) [ 4.381599] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized! [ 4.381601] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized! [ 4.381603] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized! [ 4.381604] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized! [ 4.400812] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input16 [ 4.401433] usbcore: registered new interface driver uvcvideo [ 4.401434] USB Video Class driver (1.1.1) [ 4.438670] iwlwifi 0000:04:00.0: base HW address: XX:XX:XX:XX:XX:XX [ 4.521653] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 4.521929] thermal thermal_zone2: failed to read out thermal zone (-61) [ 4.529509] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0 [ 4.564330] intel_rapl_common: Found RAPL domain package [ 4.564332] intel_rapl_common: Found RAPL domain core [ 4.564333] intel_rapl_common: Found RAPL domain uncore [ 4.564334] intel_rapl_common: Found RAPL domain dram [ 4.830684] Adding 2097148k swap on /dev/sda3. Priority:-2 extents:1 across:2097148k SSDscFS [ 5.002128] systemd-journald[969]: Received request to flush runtime journal from PID 1 [ 5.016134] usb 1-7: USB disconnect, device number 2 [ 5.024194] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 5.917800] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.917802] Bluetooth: BNEP filters: protocol multicast [ 5.917805] Bluetooth: BNEP socket layer initialized [ 6.959860] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 7.119912] iwlwifi 0000:04:00.0: Applying debug destination EXTERNAL_DRAM [ 7.212009] iwlwifi 0000:04:00.0: FW already configured (0) - re-configuring [ 9.964117] rfkill: input handler disabled [ 12.468434] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 12.482160] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 12.488008] wlp4s0: authenticated [ 12.490965] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 12.492241] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=3) [ 12.496079] wlp4s0: associated [ 12.527820] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 30.330724] rfkill: input handler enabled [ 33.566200] rfkill: input handler disabled [ 35.123874] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 35.158566] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 35.189010] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 35.204403] wlp4s0: authenticated [ 35.234679] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 35.235788] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=4) [ 35.237835] wlp4s0: associated [ 336.467316] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 336.471306] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 336.478988] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 336.490801] wlp4s0: authenticated [ 336.492901] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 336.493899] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=3) [ 336.496018] wlp4s0: associated [ 1250.856973] wlp4s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [ 1250.919872] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 1250.930686] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1250.934613] wlp4s0: authenticated [ 1250.938713] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1250.939948] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [ 1250.943187] wlp4s0: associated [ 1258.423455] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 1258.432948] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1258.491826] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 1258.554079] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 1258.624102] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 1258.790769] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 1258.798701] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1258.880852] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 1258.993509] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 1259.109895] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 1260.683778] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 1260.694495] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1260.798643] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 1260.910740] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 1261.014584] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 1275.181790] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 1275.194404] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1275.196697] wlp4s0: authenticated [ 1275.198326] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1275.200911] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [ 1275.201665] wlp4s0: AP has invalid WMM params (AIFSN=0 for ACI 0), will use 2 [ 1275.201686] wlp4s0: AP has invalid WMM params (CWmin/max=0/0 for ACI 0), using defaults [ 1275.203990] wlp4s0: associated [ 1275.205758] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 1275.232736] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [ 4209.956662] wlp4s0: Connection to AP XX:XX:XX:XX:XX:XX lost [ 4212.241056] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 4212.249043] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 4212.255963] wlp4s0: authenticated [ 4212.259624] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 4212.262815] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [ 4212.264346] wlp4s0: associated [ 4212.352554] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [ 4274.223838] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 4274.237433] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 4274.247893] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 4274.257994] wlp4s0: authenticated [ 4274.262335] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 4274.265059] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [ 4274.265428] wlp4s0: AP has invalid WMM params (AIFSN=0 for ACI 0), will use 2 [ 4274.265431] wlp4s0: AP has invalid WMM params (CWmin/max=0/0 for ACI 0), using defaults [ 4274.266517] wlp4s0: associated [ 4274.454206] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [ 6918.134470] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 6918.142706] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6918.148774] wlp4s0: authenticated [ 6918.152202] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6918.156332] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [ 6918.158188] wlp4s0: associated [ 6918.258497] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [ 6947.471015] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 6947.483732] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 6947.492594] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6947.500547] wlp4s0: authenticated [ 6947.507635] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6947.509620] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [ 6947.509921] wlp4s0: AP has invalid WMM params (AIFSN=0 for ACI 0), will use 2 [ 6947.509922] wlp4s0: AP has invalid WMM params (CWmin/max=0/0 for ACI 0), using defaults [ 6947.510591] wlp4s0: associated [ 6947.524564] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [13729.272667] wlp4s0: Connection to AP XX:XX:XX:XX:XX:XX lost [13729.628796] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [13729.636903] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [13729.642959] wlp4s0: authenticated [13729.647024] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [13729.650579] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [13729.652003] wlp4s0: associated [13729.668633] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [13885.118192] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [13885.128659] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [13885.138800] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [13885.146015] wlp4s0: authenticated [13885.148283] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [13885.150255] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [13885.150553] wlp4s0: AP has invalid WMM params (AIFSN=0 for ACI 0), will use 2 [13885.150555] wlp4s0: AP has invalid WMM params (CWmin/max=0/0 for ACI 0), using defaults [13885.153646] wlp4s0: associated [13885.215196] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [14133.042630] wlp4s0: Connection to AP XX:XX:XX:XX:XX:XX lost [14133.407511] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [14133.416033] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14133.424018] wlp4s0: authenticated [14133.427360] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14133.430256] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [14133.431263] wlp4s0: associated [14133.533151] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [14188.016828] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [14188.022224] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [14188.031453] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14188.038852] wlp4s0: authenticated [14188.042320] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14188.044765] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [14188.045484] wlp4s0: AP has invalid WMM params (AIFSN=0 for ACI 0), will use 2 [14188.045485] wlp4s0: AP has invalid WMM params (CWmin/max=0/0 for ACI 0), using defaults [14188.046523] wlp4s0: associated [14188.119847] wlp4s0: Limiting TX power to 27 (30 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [14330.430897] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [14331.797055] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [14331.805313] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14331.811205] wlp4s0: authenticated [14331.811710] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14331.812693] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [14331.813655] wlp4s0: associated [14331.820399] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [15093.595860] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15093.606705] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [15093.615805] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15093.622773] wlp4s0: authenticated [15093.625269] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15093.626282] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=4) [15093.627284] wlp4s0: associated [15118.356676] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15118.366722] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [15118.375568] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15118.381058] wlp4s0: authenticated [15118.385488] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15118.386503] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [15118.389261] wlp4s0: associated [17698.423664] usb 1-1: new high-speed USB device number 5 using xhci_hcd [17698.579174] usb 1-1: New USB device found, idVendor=13fe, idProduct=3600, bcdDevice= 1.00 [17698.579180] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [17698.579183] usb 1-1: Product: USB DISK 2.0 [17698.579186] usb 1-1: Manufacturer: [17698.579189] usb 1-1: SerialNumber: ... [17698.605375] usb-storage 1-1:1.0: USB Mass Storage device detected [17698.605471] usb-storage 1-1:1.0: Quirks match for vid 13fe pid 3600: 4000 [17698.605499] scsi host2: usb-storage 1-1:1.0 [17698.605601] usbcore: registered new interface driver usb-storage [17698.608109] usbcore: registered new interface driver uas [17699.669023] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS [17699.669828] sd 2:0:0:0: Attached scsi generic sg1 type 0 [17701.427332] sd 2:0:0:0: [sdb] 7811072 512-byte logical blocks: (4.00 GB/3.72 GiB) [17701.427621] sd 2:0:0:0: [sdb] Write Protect is off [17701.427628] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [17701.427842] sd 2:0:0:0: [sdb] No Caching mode page found [17701.427850] sd 2:0:0:0: [sdb] Assuming drive cache: write through [17701.463240] sdb: sdb1 [17701.465736] sd 2:0:0:0: [sdb] Attached SCSI removable disk [17702.052971] EXT4-fs (sdb1): recovery complete [17702.058951] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [17709.999101] usb 1-6: new high-speed USB device number 6 using xhci_hcd [17710.147953] usb 1-6: New USB device found, idVendor=0781, idProduct=5530, bcdDevice= 1.26 [17710.147958] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [17710.147961] usb 1-6: Product: Cruzer [17710.147964] usb 1-6: Manufacturer: SanDisk [17710.147967] usb 1-6: SerialNumber: ... [17710.149190] usb-storage 1-6:1.0: USB Mass Storage device detected [17710.149403] scsi host3: usb-storage 1-6:1.0 [17711.157323] scsi 3:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 6 [17711.158031] sd 3:0:0:0: Attached scsi generic sg2 type 0 [17711.159392] sd 3:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [17711.160512] sd 3:0:0:0: [sdc] Write Protect is off [17711.160517] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [17711.160780] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [17711.180672] sdc: sdc1 sdc2 [17711.183946] sd 3:0:0:0: [sdc] Attached SCSI removable disk [17713.906913] usb 1-3: new high-speed USB device number 7 using xhci_hcd [17714.055766] usb 1-3: New USB device found, idVendor=0781, idProduct=5530, bcdDevice= 2.00 [17714.055771] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [17714.055774] usb 1-3: Product: Cruzer [17714.055777] usb 1-3: Manufacturer: SanDisk [17714.055779] usb 1-3: SerialNumber: ... [17714.057216] usb-storage 1-3:1.0: USB Mass Storage device detected [17714.057618] scsi host4: usb-storage 1-3:1.0 [17715.059752] scsi 4:0:0:0: Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS [17715.060779] sd 4:0:0:0: Attached scsi generic sg3 type 0 [17715.061151] sd 4:0:0:0: [sdd] 7913471 512-byte logical blocks: (4.05 GB/3.77 GiB) [17715.061315] sd 4:0:0:0: [sdd] Write Protect is off [17715.061320] sd 4:0:0:0: [sdd] Mode Sense: 45 00 00 08 [17715.061470] sd 4:0:0:0: [sdd] No Caching mode page found [17715.061476] sd 4:0:0:0: [sdd] Assuming drive cache: write through [17715.078023] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 [17715.079373] sd 4:0:0:0: [sdd] Attached SCSI removable disk [17715.559677] EXT4-fs (sdd1): recovery complete [17715.560274] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [17715.606802] EXT4-fs (sdd8): recovery complete [17715.607754] EXT4-fs (sdd8): mounted filesystem with ordered data mode. Opts: (null) [17715.662933] EXT4-fs (sdd3): couldn't mount RDWR because of unsupported optional features (ff000000) [17812.496046] EXT4-fs (sdd3): couldn't mount RDWR because of unsupported optional features (ff000000) [18034.394021] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [18065.220435] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [18088.189871] usb 1-1: USB disconnect, device number 5 [18106.900746] usb 1-1: new high-speed USB device number 9 using xhci_hcd [18107.056244] usb 1-1: New USB device found, idVendor=13fe, idProduct=3600, bcdDevice= 1.00 [18107.056250] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [18107.056253] usb 1-1: Product: USB DISK 2.0 [18107.056256] usb 1-1: Manufacturer: [18107.056259] usb 1-1: SerialNumber: ... [18107.061172] usb-storage 1-1:1.0: USB Mass Storage device detected [18107.061396] usb-storage 1-1:1.0: Quirks match for vid 13fe pid 3600: 4000 [18107.061478] scsi host2: usb-storage 1-1:1.0 [18108.101095] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS [18108.104723] sd 2:0:0:0: Attached scsi generic sg1 type 0 [18109.805530] sd 2:0:0:0: [sdb] 7811072 512-byte logical blocks: (4.00 GB/3.72 GiB) [18109.805914] sd 2:0:0:0: [sdb] Write Protect is off [18109.805941] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [18109.806161] sd 2:0:0:0: [sdb] No Caching mode page found [18109.806168] sd 2:0:0:0: [sdb] Assuming drive cache: write through [18109.839442] sdb: sdb1 [18109.842636] sd 2:0:0:0: [sdb] Attached SCSI removable disk [18110.448623] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [18147.376850] sdb: [18250.471054] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [18334.751828] usb 1-1: USB disconnect, device number 9 [20796.810949] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [20796.822397] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [20796.827985] wlp4s0: authenticated [20796.828543] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [20796.829588] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [20796.830545] wlp4s0: associated [20866.372709] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [20866.382824] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [20866.394071] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [20866.455019] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [20866.505024] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [20866.554151] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [20866.760324] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [20866.778821] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [20866.864566] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [20866.970101] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [20867.113561] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [20873.056339] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [20873.066377] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [20873.164453] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [20873.297626] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [20873.392783] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [20957.799260] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [20957.811090] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [20957.921808] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [20958.032012] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [20958.154146] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [20969.005054] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [20969.016675] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [20969.020388] wlp4s0: authenticated [20969.021609] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [20969.022595] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=4) [20969.026180] wlp4s0: associated [20969.046622] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [26918.186899] wlp4s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [26918.281684] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [26918.290939] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26918.300966] wlp4s0: authenticated [26918.304401] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [26918.305448] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [26918.306914] wlp4s0: associated [26923.731513] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [26923.744262] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [26923.755008] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26923.761738] wlp4s0: authenticated [26923.764293] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [26923.765334] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=3) [26923.767437] wlp4s0: associated [26931.231883] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [26931.240398] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26931.274429] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [26931.354871] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [26931.405854] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [26931.593558] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [26931.601183] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26931.704254] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [26931.825359] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [26931.928297] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [26933.418809] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [26933.428368] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26933.532343] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [26933.644504] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [26933.748269] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [26983.794935] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [26983.803027] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26983.804668] wlp4s0: authenticated [26983.808343] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [26983.809446] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [26983.811635] wlp4s0: associated [26983.821094] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [30556.450636] wlp4s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [30556.633734] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [30556.641829] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30556.646197] wlp4s0: authenticated [30556.648410] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30556.649824] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [30556.650789] wlp4s0: associated [30562.339067] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [30562.348268] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [30562.358166] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30562.363118] wlp4s0: authenticated [30562.366600] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30562.368064] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=4) [30562.370603] wlp4s0: associated [30569.719041] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [30569.728293] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30569.775989] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [30569.817325] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [30569.873422] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [30570.078437] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [30570.088274] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30570.210074] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [30570.448120] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [30570.656556] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [30572.506779] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [30572.514940] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30572.616649] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [30572.728862] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [30572.832579] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [30630.384489] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [30630.393044] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30630.403153] wlp4s0: authenticated [30630.404937] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30630.408721] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [30630.416809] wlp4s0: associated [30630.429451] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [30633.995878] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [30634.011929] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [30634.021531] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30634.023878] wlp4s0: authenticated [30634.024959] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30634.025955] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [30634.027869] wlp4s0: associated [34568.820920] SGI XFS with ACLs, security attributes, realtime, no debug enabled [34568.830702] JFS: nTxBlock = 8192, nTxLock = 65536 [34568.842647] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [34568.859088] QNX4 filesystem 0.2.3 registered. [34568.914119] raid6: avx2x4 gen() 33678 MB/s [34568.962119] raid6: avx2x4 xor() 21452 MB/s [34569.010117] raid6: avx2x2 gen() 29142 MB/s [34569.058117] raid6: avx2x2 xor() 18527 MB/s [34569.106117] raid6: avx2x1 gen() 24078 MB/s [34569.154119] raid6: avx2x1 xor() 16758 MB/s [34569.202119] raid6: sse2x4 gen() 13901 MB/s [34569.250115] raid6: sse2x4 xor() 8846 MB/s [34569.298115] raid6: sse2x2 gen() 11927 MB/s [34569.346112] raid6: sse2x2 xor() 8065 MB/s [34569.394116] raid6: sse2x1 gen() 10611 MB/s [34569.442112] raid6: sse2x1 xor() 6120 MB/s [34569.442112] raid6: using algorithm avx2x4 gen() 33678 MB/s [34569.442113] raid6: .... xor() 21452 MB/s, rmw enabled [34569.442114] raid6: using avx2x2 recovery algorithm [34569.453405] xor: automatically using best checksumming function avx [34569.472147] Btrfs loaded, crc32c=crc32c-intel [34569.919694] device-mapper: table: 253:0: linear: Device lookup failed [34569.919696] device-mapper: ioctl: error adding target to table [35330.032919] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [35330.043514] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [35330.054291] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [35330.065509] wlp4s0: authenticated [35330.069769] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [35330.071195] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=1) [35330.073061] wlp4s0: associated [35330.122265] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [35961.607407] iwlwifi 0000:04:00.0: offset 0 not used in fw key table. [35961.607417] wlp4s0: failed to remove key (5, XX:XX:XX:XX:XX:XX) from hardware (-2) [35963.434603] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [35963.442694] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [35963.455950] wlp4s0: authenticated [35963.459358] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [35963.460346] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [35963.462229] wlp4s0: associated [37369.077208] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [37369.087395] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37369.150411] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [37369.202432] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [37369.253790] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [37369.436675] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [37369.448289] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37369.530863] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [37369.666164] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [37369.711034] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [37371.548234] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [37371.557347] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37371.663518] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [37371.778952] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [37371.883485] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [37386.395769] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [37386.407300] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37386.413133] wlp4s0: authenticated [37386.419544] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37386.420766] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [37386.422860] wlp4s0: associated [37386.450149] wlp4s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [37394.776625] wlp4s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [37422.820502] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [37422.829010] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37422.835056] wlp4s0: authenticated [37422.835427] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37422.836761] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [37422.838725] wlp4s0: associated [37424.409652] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [61226.860747] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [61226.868447] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [61226.880093] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [61226.888264] wlp4s0: authenticated [61226.892668] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [61226.895298] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=4) [61226.897233] wlp4s0: associated [61232.350854] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [61232.361728] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [61232.375000] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [61232.380885] wlp4s0: authenticated [61232.388620] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [61232.389704] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [61232.392583] wlp4s0: associated [71432.533094] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [71432.540250] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [71432.551066] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [71432.556978] wlp4s0: authenticated [71432.558680] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [71432.559677] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [71432.561863] wlp4s0: associated [71442.233236] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [71442.244142] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [71442.252941] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [71442.259678] wlp4s0: authenticated [71442.265907] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [71442.266906] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [71442.268763] wlp4s0: associated [72967.075486] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [72967.091835] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [72967.103818] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [72967.121302] wlp4s0: authenticated [72967.123443] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [72967.125150] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [72967.126856] wlp4s0: associated [72975.146161] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [72975.155763] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [72975.163374] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [72975.168505] wlp4s0: authenticated [72975.171694] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [72975.172692] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [72975.174817] wlp4s0: associated [82724.500306] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [82724.508493] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [82724.518762] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [82724.524627] wlp4s0: authenticated [82724.527770] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [82724.528924] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=4) [82724.529953] wlp4s0: associated [82734.080010] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [82734.090437] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [82734.102529] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [82734.109864] wlp4s0: authenticated [82734.111962] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [82734.114112] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [82734.117095] wlp4s0: associated [83317.160899] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [83317.163887] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [83317.173074] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83317.180243] wlp4s0: authenticated [83317.183654] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83317.184582] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [83317.186515] wlp4s0: associated [83361.552974] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [83361.558212] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [83361.568811] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83361.579408] wlp4s0: authenticated [83361.583205] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83361.584206] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [83361.586048] wlp4s0: associated [83858.033531] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [83858.045767] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [83858.056614] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83858.062548] wlp4s0: authenticated [83858.067166] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83858.068349] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [83858.069460] wlp4s0: associated [83875.907014] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [83875.909313] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [83875.917336] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83875.922605] wlp4s0: authenticated [83875.922993] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83875.923965] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [83875.925908] wlp4s0: associated [83881.017451] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [83881.027888] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [83881.037116] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83881.038764] wlp4s0: authenticated [83881.042955] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83881.043954] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [83881.046625] wlp4s0: associated [83884.930615] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [83884.940161] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [83884.951587] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83884.952967] wlp4s0: authenticated [83884.958925] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83884.959929] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [83884.961772] wlp4s0: associated [83904.464321] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [83904.475382] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [83904.484370] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83904.491998] wlp4s0: authenticated [83904.494761] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83904.495814] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [83904.498399] wlp4s0: associated [83910.017772] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [83910.029166] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [83910.040995] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83910.047988] wlp4s0: authenticated [83910.050990] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83910.052000] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [83910.054907] wlp4s0: associated [84852.990947] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [89273.306393] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89273.309316] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89273.317575] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89273.323197] wlp4s0: authenticated [89273.324984] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89273.325976] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89273.328217] wlp4s0: associated [89333.051061] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89333.060994] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89333.069621] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89333.076595] wlp4s0: authenticated [89333.093281] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89333.094503] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89333.097880] wlp4s0: associated [89354.258230] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89354.265044] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89354.276721] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89354.289157] wlp4s0: authenticated [89354.289862] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89354.290868] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89354.293006] wlp4s0: associated [89402.885616] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89402.894308] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89402.901672] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89402.907308] wlp4s0: authenticated [89402.911230] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89402.912232] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89402.914126] wlp4s0: associated [89635.014938] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89635.022878] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89635.030960] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89635.037162] wlp4s0: authenticated [89635.039970] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89635.040975] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89635.041926] wlp4s0: associated [89638.841240] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89638.850843] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89638.858541] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89638.865056] wlp4s0: authenticated [89638.868104] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89638.869108] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89638.871583] wlp4s0: associated [89865.397177] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89865.400078] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89865.408328] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89865.414986] wlp4s0: authenticated [89865.430483] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89865.431609] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89865.432927] wlp4s0: associated [89869.237386] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89869.246705] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89869.254290] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89869.259177] wlp4s0: authenticated [89869.262640] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89869.263638] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89869.266019] wlp4s0: associated [89871.325939] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89871.337444] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89871.345637] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89871.365231] wlp4s0: authenticated [89871.366771] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89871.367901] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89871.370097] wlp4s0: associated [89878.847033] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89878.855580] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89878.863723] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89878.869328] wlp4s0: authenticated [89878.870743] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89878.871674] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89878.874361] wlp4s0: associated [89905.846682] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89905.855523] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89905.863410] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89905.876303] wlp4s0: authenticated [89905.878767] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89905.879769] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89905.881670] wlp4s0: associated [89924.429703] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89924.440210] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89924.450103] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89924.460809] wlp4s0: authenticated [89924.474914] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89924.476046] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89924.478077] wlp4s0: associated [89927.341131] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89927.351709] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89927.360472] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89927.370566] wlp4s0: authenticated [89927.371035] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89927.371996] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89927.374586] wlp4s0: associated [89941.925713] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [89941.938156] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [89941.948622] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [89941.953813] wlp4s0: authenticated [89941.957896] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [89941.959143] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [89941.962029] wlp4s0: associated [90188.975692] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [90188.994304] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [90189.005799] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90189.022822] wlp4s0: authenticated [90189.027901] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [90189.028953] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [90189.030234] wlp4s0: associated [90194.865956] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [90194.875433] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [90194.886991] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90194.895609] wlp4s0: authenticated [90194.899883] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [90194.900887] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [90194.903297] wlp4s0: associated [90780.452609] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [90780.469887] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [90780.481081] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90780.491069] wlp4s0: authenticated [90780.495196] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [90780.496210] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [90780.497230] wlp4s0: associated [90799.996586] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [90800.009159] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [90800.019435] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90800.021012] wlp4s0: authenticated [90800.031140] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [90800.032272] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [90800.034289] wlp4s0: associated [91153.986504] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91153.998468] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91154.010536] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91154.023816] wlp4s0: authenticated [91154.025846] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91154.026860] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91154.027938] wlp4s0: associated [91159.463988] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91159.474026] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91159.483506] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91159.490328] wlp4s0: authenticated [91159.493958] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91159.495402] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91159.497245] wlp4s0: associated [91519.571520] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91519.580687] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91519.591995] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91519.605308] wlp4s0: authenticated [91519.610437] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91519.611504] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91519.613403] wlp4s0: associated [91692.940845] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91692.947445] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91692.957848] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91692.969660] wlp4s0: authenticated [91692.972241] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91692.973250] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91692.975158] wlp4s0: associated [91699.423294] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91699.432826] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91699.440445] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91699.447099] wlp4s0: authenticated [91699.448183] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91699.449451] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91699.451335] wlp4s0: associated [91737.989289] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91737.994430] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91738.003046] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91738.011578] wlp4s0: authenticated [91738.015773] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91738.016805] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91738.018719] wlp4s0: associated [91782.736056] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91782.744289] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91782.755914] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91782.761965] wlp4s0: authenticated [91782.765800] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91782.766806] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91782.768690] wlp4s0: associated [91786.456624] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91786.467365] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91786.474396] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91786.479782] wlp4s0: authenticated [91786.483411] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91786.484413] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91786.486474] wlp4s0: associated [91798.926727] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91798.941755] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91798.953143] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91798.954846] wlp4s0: authenticated [91798.963107] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91798.964226] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91798.966278] wlp4s0: associated [91989.876113] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [91989.884046] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [91989.892295] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [91989.900988] wlp4s0: authenticated [91989.905097] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [91989.906099] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [91989.907955] wlp4s0: associated [92039.758167] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [92039.765562] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [92039.777792] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92039.788087] wlp4s0: authenticated [92039.788641] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92039.789580] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [92039.791583] wlp4s0: associated [92043.881057] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [92043.891658] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [92043.899689] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92043.905475] wlp4s0: authenticated [92043.908605] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92043.910770] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [92043.925033] wlp4s0: associated [92071.909501] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [92071.921424] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [92071.932207] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92071.945759] wlp4s0: authenticated [92071.948586] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92071.949616] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [92071.952651] wlp4s0: associated [92075.933822] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [92075.948982] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [92075.959942] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92075.961460] wlp4s0: authenticated [92075.968312] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92075.969593] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [92075.971640] wlp4s0: associated [92100.403411] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [92100.410994] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [92100.422834] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92100.433640] wlp4s0: authenticated [92100.436114] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92100.437561] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [92100.440408] wlp4s0: associated [92111.962723] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [92111.971164] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [92111.981811] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92111.983743] wlp4s0: authenticated [92111.991986] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92111.993089] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [92111.994901] wlp4s0: associated [94108.990038] wlp4s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [94109.198968] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [94109.208465] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94109.221848] wlp4s0: authenticated [94109.224463] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [94109.225597] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=1) [94109.227833] wlp4s0: associated [94111.519049] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [94111.533887] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [94111.542245] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94111.548006] wlp4s0: authenticated [94111.552042] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [94111.553678] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [94111.557112] wlp4s0: associated [94121.149904] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [94121.158095] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94121.201444] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [94121.267186] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [94121.332184] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [94121.510150] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [94121.519020] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94121.640742] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [94121.729765] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [94121.790323] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [94122.849784] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [94122.858708] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94123.089091] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [94123.235700] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [94123.339636] wlp4s0: authentication with XX:XX:XX:XX:XX:XX timed out [94173.993882] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [94174.005955] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94174.007911] wlp4s0: authenticated [94174.014392] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [94174.015644] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [94174.017748] wlp4s0: associated [94175.474062] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [96215.054241] EXT4-fs (sdd3): couldn't mount RDWR because of unsupported optional features (ff000000) [96255.797641] usb 1-6: USB disconnect, device number 6 [96259.129785] sd 4:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [96259.129788] sd 4:0:0:0: [sdd] tag#0 Sense Key : Hardware Error [current] [96259.129789] sd 4:0:0:0: [sdd] tag#0 Add. Sense: No additional sense information [96259.129792] sd 4:0:0:0: [sdd] tag#0 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [96259.205260] usb 1-3: USB disconnect, device number 7 [114851.801072] perf: interrupt took too long (3150 > 3131), lowering kernel.perf_event_max_sample_rate to 63500 [120044.156996] device-mapper: table: 253:0: linear: Device lookup failed [120044.156999] device-mapper: ioctl: error adding target to table [145124.708052] perf: interrupt took too long (4092 > 3937), lowering kernel.perf_event_max_sample_rate to 48750 [168895.119804] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [168895.129412] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [168895.139422] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [168895.150706] wlp4s0: authenticated [168895.152395] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [168895.153980] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [168895.156008] wlp4s0: associated [168930.078730] wlp4s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [168930.091310] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [168930.099140] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [168930.104835] wlp4s0: authenticated [168930.108243] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [168930.109248] wlp4s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x11 status=0 aid=2) [168930.111168] wlp4s0: associated