[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13 [ 0.000000] Linux version 5.3.18-lp152.36-default (XXX@XXX) (gcc version 7.5.0 (SUSE Linux)) #1 SMP Tue Aug 18 17:09:44 UTC 2020 (885251f) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.18-lp152.36-default root=UUID=HASH_38A-017C-7105-175C-0143B31E3F8B splash=silent resume=/dev/disk/by-id/ata-HGST_HTS545050A7E380_130325TE8513490TRYBC-part3 mitigations=auto quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a95affff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a95b0000-0x00000000aa9affff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aa9b0000-0x00000000aefbefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aefbf000-0x00000000af6befff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xa84fd018-0xa850cc57] usable ==> usable [ 0.000000] e820: update [mem 0xa84fd018-0xa850cc57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a84fd017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a84fd018-0x00000000a850cc57] usable [ 0.000000] reserve setup_data: [mem 0x00000000a850cc58-0x00000000a95affff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a95b0000-0x00000000aa9affff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000aa9b0000-0x00000000aefbefff] usable [ 0.000000] reserve setup_data: [mem 0x00000000aefbf000-0x00000000af6befff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000af7ff000-0x00000000af7fffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000af800000-0x00000000afffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff980000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000024effffff] usable [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0xaf7fe000 ACPI 2.0=0xaf7fe014 SMBIOS=0xaf6bdf18 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Sony Corporation SVE1713A1EW/VAIO, BIOS R0170D6 03/13/2012 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2394.361 MHz processor [ 0.000243] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000245] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000251] last_pfn = 0x24f000 max_arch_pfn = 0x400000000 [ 0.000255] MTRR default type: uncachable [ 0.000256] MTRR fixed ranges enabled: [ 0.000257] 00000-9FFFF write-back [ 0.000258] A0000-BFFFF uncachable [ 0.000259] C0000-E7FFF write-protect [ 0.000259] E8000-EFFFF write-combining [ 0.000260] F0000-FFFFF write-protect [ 0.000261] MTRR variable ranges enabled: [ 0.000262] 0 base 000000000 mask F80000000 write-back [ 0.000263] 1 base 080000000 mask FC0000000 write-back [ 0.000264] 2 base 0AF800000 mask FFF800000 uncachable [ 0.000265] 3 base 0B0000000 mask FF0000000 uncachable [ 0.000266] 4 base 0FF800000 mask FFF800000 write-protect [ 0.000266] 5 base 100000000 mask F00000000 write-back [ 0.000267] 6 base 200000000 mask F80000000 write-back [ 0.000268] 7 base 24F000000 mask FFF000000 uncachable [ 0.000269] 8 base 250000000 mask FF0000000 uncachable [ 0.000269] 9 base 260000000 mask FE0000000 uncachable [ 0.000558] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000670] last_pfn = 0xaf800 max_arch_pfn = 0x400000000 [ 0.019843] check: Scanning 1 areas for low memory corruption [ 0.019851] BRK [0x184c01000, 0x184c01fff] PGTABLE [ 0.019853] BRK [0x184c02000, 0x184c02fff] PGTABLE [ 0.019854] BRK [0x184c03000, 0x184c03fff] PGTABLE [ 0.019884] BRK [0x184c04000, 0x184c04fff] PGTABLE [ 0.019885] BRK [0x184c05000, 0x184c05fff] PGTABLE [ 0.019971] BRK [0x184c06000, 0x184c06fff] PGTABLE [ 0.020025] BRK [0x184c07000, 0x184c07fff] PGTABLE [ 0.020037] BRK [0x184c08000, 0x184c08fff] PGTABLE [ 0.020070] BRK [0x184c09000, 0x184c09fff] PGTABLE [ 0.020108] BRK [0x184c0a000, 0x184c0afff] PGTABLE [ 0.020153] BRK [0x184c0b000, 0x184c0bfff] PGTABLE [ 0.020187] BRK [0x184c0c000, 0x184c0cfff] PGTABLE [ 0.020293] secureboot: Secure boot disabled [ 0.020294] RAMDISK: [mem 0x3f269000-0x3fffafff] [ 0.020301] ACPI: Early table checksum verification disabled [ 0.020304] ACPI: RSDP 0x00000000AF7FE014 000024 (v02 Sony ) [ 0.020307] ACPI: XSDT 0x00000000AF7FE210 0000B4 (v01 Sony VAIO 20130313 01000013) [ 0.020314] ACPI: FACP 0x00000000AF7FA000 00010C (v05 Sony VAIO 20130313 ACPI 00040000) [ 0.020320] ACPI: DSDT 0x00000000AF7EC000 00A9B1 (v02 Sony VAIO 20130313 ACPI 00040000) [ 0.020323] ACPI: FACS 0x00000000AF7BA000 000040 [ 0.020325] ACPI: SSDT 0x00000000AF7FD000 0005E3 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020328] ACPI: UEFI 0x00000000AF7FC000 000236 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020331] ACPI: ASF! 0x00000000AF7FB000 0000A5 (v32 Sony VAIO 20130313 ACPI 00040000) [ 0.020334] ACPI: HPET 0x00000000AF7F9000 000038 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020337] ACPI: APIC 0x00000000AF7F8000 00008C (v03 Sony VAIO 20130313 ACPI 00040000) [ 0.020340] ACPI: MCFG 0x00000000AF7F7000 00003C (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020343] ACPI: WDAT 0x00000000AF7EB000 000224 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020345] ACPI: SSDT 0x00000000AF7E9000 001068 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020348] ACPI: BOOT 0x00000000AF7E7000 000028 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020351] ACPI: ASPT 0x00000000AF7E5000 000034 (v07 Sony VAIO 20130313 ACPI 00040000) [ 0.020354] ACPI: DBGP 0x00000000AF7E4000 000034 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020357] ACPI: FPDT 0x00000000AF7E3000 000044 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020359] ACPI: MSDM 0x00000000AF7E1000 000055 (v03 Sony VAIO 20130313 ACPI 00040000) [ 0.020362] ACPI: SSDT 0x00000000AF7E0000 0008E4 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020365] ACPI: SSDT 0x00000000AF7DF000 000A92 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020368] ACPI: VFCT 0x00000000AF7D9000 005484 (v01 Sony VAIO 20130313 ACPI 00040000) [ 0.020371] ACPI: BGRT 0x00000000AF7D8000 000038 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000) [ 0.020380] ACPI: Local APIC address 0xfee00000 [ 0.020466] No NUMA configuration found [ 0.020467] Faking a node at [mem 0x0000000000000000-0x000000024effffff] [ 0.020474] NODE_DATA(0) allocated [mem 0x24efe6000-0x24effbfff] [ 0.020511] Zone ranges: [ 0.020512] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.020513] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.020514] Normal [mem 0x0000000100000000-0x000000024effffff] [ 0.020514] Device empty [ 0.020515] Movable zone start for each node [ 0.020517] Early memory node ranges [ 0.020518] node 0: [mem 0x0000000000001000-0x0000000000087fff] [ 0.020519] node 0: [mem 0x0000000000100000-0x00000000a95affff] [ 0.020520] node 0: [mem 0x00000000aa9b0000-0x00000000aefbefff] [ 0.020520] node 0: [mem 0x00000000af7ff000-0x00000000af7fffff] [ 0.020521] node 0: [mem 0x0000000100000000-0x000000024effffff] [ 0.020622] Zeroed struct page in unavailable ranges: 9401 pages [ 0.020624] Initmem setup node 0 [mem 0x0000000000001000-0x000000024effffff] [ 0.020625] On node 0 totalpages: 2083655 [ 0.020626] DMA zone: 64 pages used for memmap [ 0.020627] DMA zone: 22 pages reserved [ 0.020627] DMA zone: 3975 pages, LIFO batch:0 [ 0.020713] DMA32 zone: 11055 pages used for memmap [ 0.020714] DMA32 zone: 707520 pages, LIFO batch:63 [ 0.037911] Normal zone: 21440 pages used for memmap [ 0.037913] Normal zone: 1372160 pages, LIFO batch:63 [ 0.038762] ACPI: PM-Timer IO Port: 0x408 [ 0.038764] ACPI: Local APIC address 0xfee00000 [ 0.038783] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.038785] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.038786] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.038787] ACPI: IRQ0 used by override. [ 0.038788] ACPI: IRQ9 used by override. [ 0.038790] Using ACPI (MADT) for SMP configuration information [ 0.038792] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.038805] smpboot: Allowing 8 CPUs, 6 hotplug CPUs [ 0.038826] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.038827] PM: Registered nosave memory: [mem 0x00088000-0x000bffff] [ 0.038828] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.038829] PM: Registered nosave memory: [mem 0xa84fd000-0xa84fdfff] [ 0.038831] PM: Registered nosave memory: [mem 0xa850c000-0xa850cfff] [ 0.038832] PM: Registered nosave memory: [mem 0xa95b0000-0xaa9affff] [ 0.038834] PM: Registered nosave memory: [mem 0xaefbf000-0xaf6befff] [ 0.038835] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff] [ 0.038835] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff] [ 0.038837] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff] [ 0.038837] PM: Registered nosave memory: [mem 0xb0000000-0xefffffff] [ 0.038838] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] [ 0.038839] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff] [ 0.038839] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.038840] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.038840] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.038841] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.038841] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.038842] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.038842] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.038843] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.038843] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.038844] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff] [ 0.038844] PM: Registered nosave memory: [mem 0xff980000-0xffffffff] [ 0.038846] [mem 0xb0000000-0xefffffff] available for PCI devices [ 0.038847] Booting paravirtualized kernel on bare hardware [ 0.038850] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.157357] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.157705] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144 [ 0.157715] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152 [ 0.157715] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.157741] Built 1 zonelists, mobility grouping on. Total pages: 2051074 [ 0.157742] Policy zone: Normal [ 0.157744] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.18-lp152.36-default root=UUID=HASH_38A-017C-7105-175C-0143B31E3F8B splash=silent resume=/dev/disk/by-id/ata-HGST_HTS545050A7E380_130325TE8513490TRYBC-part3 mitigations=auto quiet [ 0.157848] printk: log_buf_len individual max cpu contribution: 32768 bytes [ 0.157849] printk: log_buf_len total cpu_extra contributions: 229376 bytes [ 0.157849] printk: log_buf_len min size: 262144 bytes [ 0.157931] printk: log_buf_len: 524288 bytes [ 0.157932] printk: early log buf free: 248068(94%) [ 0.158600] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.158948] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.159048] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.178709] Memory: 2837528K/8334620K available (12291K kernel code, 1482K rwdata, 4228K rodata, 2156K init, 12992K bss, 326904K reserved, 0K cma-reserved) [ 0.178716] random: get_random_u64 called from __kmem_cache_create+0x40/0x560 with crng_init=0 [ 0.178837] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.178850] Kernel/User page tables isolation: enabled [ 0.178870] ftrace: allocating 38694 entries in 152 pages [ 0.194575] rcu: Hierarchical RCU implementation. [ 0.194576] rcu: RCU event tracing is enabled. [ 0.194577] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. [ 0.194577] Tasks RCU enabled. [ 0.194578] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.194579] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.198308] NR_IRQS: 33024, nr_irqs: 488, preallocated irqs: 16 [ 0.198555] Console: colour dummy device 80x25 [ 0.198560] printk: console [tty0] enabled [ 0.198576] ACPI: Core revision 20190703 [ 0.198764] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.198780] APIC: Switch to symmetric I/O mode setup [ 0.198851] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.199281] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.218782] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228368a4100, max_idle_ns: 440795291276 ns [ 0.218786] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.72 BogoMIPS (lpj=9577444) [ 0.218788] pid_max: default: 32768 minimum: 301 [ 0.226818] LSM: Security Framework initializing [ 0.226847] AppArmor: AppArmor initialized [ 0.226897] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.226914] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.227180] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.227190] process: using mwait in idle threads [ 0.227193] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.227194] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.227197] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.227199] Spectre V2 : Mitigation: Full generic retpoline [ 0.227200] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.227200] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.227202] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.227203] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.227206] MDS: Mitigation: Clear CPU buffers [ 0.227457] Freeing SMP alternatives memory: 36K [ 0.230872] TSC deadline timer enabled [ 0.230875] smpboot: CPU0: Intel(R) Pentium(R) CPU 2020M @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.230974] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.230980] ... version: 3 [ 0.230980] ... bit width: 48 [ 0.230981] ... generic registers: 8 [ 0.230981] ... value mask: 0000ffffffffffff [ 0.230982] ... max period: 00007fffffffffff [ 0.230982] ... fixed-purpose events: 3 [ 0.230983] ... event mask: 00000007000000ff [ 0.231022] rcu: Hierarchical SRCU implementation. [ 0.231828] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.231916] smp: Bringing up secondary CPUs ... [ 0.232013] x86: Booting SMP configuration: [ 0.232014] .... node #0, CPUs: #1 [ 0.234813] smp: Brought up 1 node, 2 CPUs [ 0.234814] smpboot: Max logical packages: 4 [ 0.234815] smpboot: Total of 2 processors activated (9577.44 BogoMIPS) [ 0.238802] node 0 initialised, 1292547 pages in 4ms [ 0.239020] devtmpfs: initialized [ 0.239020] x86/mm: Memory block size: 128MB [ 0.239501] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes) [ 0.239501] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.239501] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.239501] pinctrl core: initialized pinctrl subsystem [ 0.239501] PM: RTC time: 19:02:00, date: 2020-09-11 [ 0.239501] NET: Registered protocol family 16 [ 0.239501] cpuidle: using governor ladder [ 0.239501] cpuidle: using governor menu [ 0.239501] Simple Boot Flag at 0x44 set to 0x1 [ 0.239501] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.239501] ACPI: bus type PCI registered [ 0.239501] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.239501] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.239501] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.239501] PCI: Using configuration type 1 for base access [ 0.239501] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.239501] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.240034] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.242843] ACPI: Added _OSI(Module Device) [ 0.242844] ACPI: Added _OSI(Processor Device) [ 0.242845] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.242846] ACPI: Added _OSI(Processor Aggregator Device) [ 0.242847] ACPI: Added _OSI(Linux-Dell-Video) [ 0.242848] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.242849] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.251708] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.253507] ACPI: Dynamic OEM Table Load: [ 0.253515] ACPI: SSDT 0xFFFF8A58C7FC4000 0007B4 (v01 PmRef Cpu0Cst 00003001 INTL 20121220) [ 0.254468] ACPI: Dynamic OEM Table Load: [ 0.254474] ACPI: SSDT 0xFFFF8A58C745EC00 000303 (v01 PmRef ApIst 00003000 INTL 20121220) [ 0.255189] ACPI: Dynamic OEM Table Load: [ 0.255193] ACPI: SSDT 0xFFFF8A5A06BFAE00 000119 (v01 PmRef ApCst 00003000 INTL 20121220) [ 0.255998] ACPI: EC: EC started [ 0.255999] ACPI: EC: interrupt blocked [ 0.257444] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.257446] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.257447] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.257448] ACPI: Interpreter enabled [ 0.257473] ACPI: (supports S0 S3 S4 S5) [ 0.257474] ACPI: Using IOAPIC for interrupt routing [ 0.257503] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.257730] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM [ 0.257745] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.264497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.264503] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.264697] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.265185] PCI host bridge to bus 0000:00 [ 0.265187] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.265188] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.265190] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.265191] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.265192] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.265193] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.265194] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.265195] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.265196] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.265197] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.265198] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.265199] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.265200] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.265201] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.265202] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.265203] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.265204] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window] [ 0.265205] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.265214] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.265317] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.265358] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.265484] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.265510] pci 0000:00:14.0: reg 0x10: [mem 0xc5100000-0xc510ffff 64bit] [ 0.265583] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.265686] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.265712] pci 0000:00:16.0: reg 0x10: [mem 0xc5114000-0xc511400f 64bit] [ 0.265789] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.265884] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.265907] pci 0000:00:1a.0: reg 0x10: [mem 0xc5119000-0xc51193ff] [ 0.265993] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.266097] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.266119] pci 0000:00:1b.0: reg 0x10: [mem 0xc5110000-0xc5113fff 64bit] [ 0.266200] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.266303] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.266404] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.266516] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.266615] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.266724] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.266825] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.266941] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.266964] pci 0000:00:1d.0: reg 0x10: [mem 0xc5118000-0xc51183ff] [ 0.267049] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.267154] pci 0000:00:1f.0: [8086:1e5e] type 00 class 0x060100 [ 0.267353] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.267372] pci 0000:00:1f.2: reg 0x10: [io 0x6048-0x604f] [ 0.267380] pci 0000:00:1f.2: reg 0x14: [io 0x6054-0x6057] [ 0.267388] pci 0000:00:1f.2: reg 0x18: [io 0x6040-0x6047] [ 0.267395] pci 0000:00:1f.2: reg 0x1c: [io 0x6050-0x6053] [ 0.267403] pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f] [ 0.267411] pci 0000:00:1f.2: reg 0x24: [mem 0xc5117000-0xc51177ff] [ 0.267455] pci 0000:00:1f.2: PME# supported from D3hot [ 0.267551] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.267571] pci 0000:00:1f.3: reg 0x10: [mem 0xc5115000-0xc51150ff 64bit] [ 0.267592] pci 0000:00:1f.3: reg 0x20: [io 0x6000-0x601f] [ 0.267737] pci 0000:01:00.0: [1002:6841] type 00 class 0x030000 [ 0.267751] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.267758] pci 0000:01:00.0: reg 0x18: [mem 0xc4000000-0xc401ffff 64bit] [ 0.267762] pci 0000:01:00.0: reg 0x20: [io 0x5000-0x50ff] [ 0.267771] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.267775] pci 0000:01:00.0: enabling Extended Tags [ 0.267785] pci 0000:01:00.0: BAR 0: assigned to efifb [ 0.267805] pci 0000:01:00.0: supports D1 D2 [ 0.267870] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300 [ 0.267884] pci 0000:01:00.1: reg 0x10: [mem 0xc4020000-0xc4023fff 64bit] [ 0.267906] pci 0000:01:00.1: enabling Extended Tags [ 0.267933] pci 0000:01:00.1: supports D1 D2 [ 0.267987] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.267989] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.267991] pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc4ffffff] [ 0.267994] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.268065] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000 [ 0.268107] pci 0000:02:00.0: reg 0x10: [mem 0xc3000000-0xc307ffff 64bit] [ 0.268170] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.268267] pci 0000:02:00.0: supports D1 D2 [ 0.268268] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.268399] pci 0000:00:1c.0: PCI bridge to [bus 02-07] [ 0.268403] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.268406] pci 0000:00:1c.0: bridge window [mem 0xc3000000-0xc3ffffff] [ 0.268412] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref] [ 0.268491] pci 0000:08:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.268529] pci 0000:08:00.0: reg 0x10: [mem 0xc2000000-0xc2000fff] [ 0.268709] pci 0000:08:00.0: supports D1 D2 [ 0.268710] pci 0000:08:00.0: PME# supported from D1 D2 D3hot [ 0.268850] pci 0000:00:1c.1: PCI bridge to [bus 08-0d] [ 0.268854] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.268857] pci 0000:00:1c.1: bridge window [mem 0xc2000000-0xc2ffffff] [ 0.268863] pci 0000:00:1c.1: bridge window [mem 0xc1000000-0xc1ffffff 64bit pref] [ 0.268936] pci 0000:0e:00.0: [10ec:8168] type 00 class 0x020000 [ 0.268971] pci 0000:0e:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.269005] pci 0000:0e:00.0: reg 0x18: [mem 0xc5004000-0xc5004fff 64bit pref] [ 0.269027] pci 0000:0e:00.0: reg 0x20: [mem 0xc5000000-0xc5003fff 64bit pref] [ 0.269150] pci 0000:0e:00.0: supports D1 D2 [ 0.269151] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269291] pci 0000:00:1c.2: PCI bridge to [bus 0e] [ 0.269295] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.269303] pci 0000:00:1c.2: bridge window [mem 0xc5000000-0xc50fffff 64bit pref] [ 0.269980] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270060] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270137] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270215] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270291] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270367] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270443] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270519] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.270793] ACPI: EC: interrupt unblocked [ 0.270793] ACPI: EC: event unblocked [ 0.270793] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.270793] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.270824] iommu: Default domain type: Passthrough [ 0.270825] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.270827] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.270827] pci 0000:01:00.0: vgaarb: setting as boot device [ 0.270828] vgaarb: loaded [ 0.270912] SCSI subsystem initialized [ 0.270936] libata version 3.00 loaded. [ 0.270936] pps_core: LinuxPPS API ver. 1 registered [ 0.270936] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.270936] PTP clock support registered [ 0.270936] EDAC MC: Ver: 3.0.0 [ 0.270936] Registered efivars operations [ 0.270936] PCI: Using ACPI for IRQ routing [ 0.272618] PCI: pci_cache_line_size set to 64 bytes [ 0.272675] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff] [ 0.272676] e820: reserve RAM buffer [mem 0xa84fd018-0xabffffff] [ 0.272677] e820: reserve RAM buffer [mem 0xa95b0000-0xabffffff] [ 0.272678] e820: reserve RAM buffer [mem 0xaefbf000-0xafffffff] [ 0.272679] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff] [ 0.272680] e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff] [ 0.272780] NetLabel: Initializing [ 0.272781] NetLabel: domain hash size = 128 [ 0.272781] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.272795] NetLabel: unlabeled traffic allowed by default [ 0.272812] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.272812] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.275805] clocksource: Switched to clocksource tsc-early [ 0.286890] VFS: Disk quotas dquot_6.6.0 [ 0.286906] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.287002] AppArmor: AppArmor Filesystem Enabled [ 0.287020] pnp: PnP ACPI init [ 0.287177] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.287179] system 00:00: [io 0xffff] has been reserved [ 0.287180] system 00:00: [io 0xffff] has been reserved [ 0.287182] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.287183] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.287184] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.287186] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved [ 0.287191] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.287217] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.287276] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.287280] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.287361] pnp 00:03: Plug and Play ACPI device, IDs SNYa009 PNP030b (active) [ 0.287381] pnp 00:04: Plug and Play ACPI device, IDs SYN2705 SYN0300 SYN0002 PNP0f13 (active) [ 0.287562] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.287563] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.287565] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.287566] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.287567] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.287569] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.287570] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.287572] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.287573] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.287574] system 00:05: [mem 0xc5200000-0xc5200fff] has been reserved [ 0.287578] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.287865] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 0.287867] system 00:06: [mem 0x40004000-0x40004fff] could not be reserved [ 0.287870] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.287893] pnp: PnP ACPI: found 7 devices [ 0.289015] thermal_sys: Registered thermal governor 'fair_share' [ 0.289016] thermal_sys: Registered thermal governor 'bang_bang' [ 0.289017] thermal_sys: Registered thermal governor 'step_wise' [ 0.289017] thermal_sys: Registered thermal governor 'user_space' [ 0.293515] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.293547] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.293549] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.293558] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4040000-0xc405ffff pref] [ 0.293560] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.293562] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 0.293565] pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc4ffffff] [ 0.293567] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.293571] pci 0000:02:00.0: BAR 6: assigned [mem 0xc3080000-0xc308ffff pref] [ 0.293572] pci 0000:00:1c.0: PCI bridge to [bus 02-07] [ 0.293575] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.293579] pci 0000:00:1c.0: bridge window [mem 0xc3000000-0xc3ffffff] [ 0.293583] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref] [ 0.293589] pci 0000:00:1c.1: PCI bridge to [bus 08-0d] [ 0.293592] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.293596] pci 0000:00:1c.1: bridge window [mem 0xc2000000-0xc2ffffff] [ 0.293600] pci 0000:00:1c.1: bridge window [mem 0xc1000000-0xc1ffffff 64bit pref] [ 0.293606] pci 0000:00:1c.2: PCI bridge to [bus 0e] [ 0.293609] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.293616] pci 0000:00:1c.2: bridge window [mem 0xc5000000-0xc50fffff 64bit pref] [ 0.293622] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.293624] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.293625] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.293626] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.293627] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.293628] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.293629] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.293630] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.293631] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.293632] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.293633] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.293634] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.293635] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.293636] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.293637] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.293638] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.293639] pci_bus 0000:00: resource 20 [mem 0xb0000000-0xfeafffff window] [ 0.293641] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] [ 0.293642] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc4ffffff] [ 0.293643] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.293644] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.293645] pci_bus 0000:02: resource 1 [mem 0xc3000000-0xc3ffffff] [ 0.293646] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref] [ 0.293647] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] [ 0.293648] pci_bus 0000:08: resource 1 [mem 0xc2000000-0xc2ffffff] [ 0.293649] pci_bus 0000:08: resource 2 [mem 0xc1000000-0xc1ffffff 64bit pref] [ 0.293650] pci_bus 0000:0e: resource 0 [io 0x2000-0x2fff] [ 0.293651] pci_bus 0000:0e: resource 2 [mem 0xc5000000-0xc50fffff 64bit pref] [ 0.293762] NET: Registered protocol family 2 [ 0.293889] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.293901] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.293990] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.294139] TCP: Hash tables configured (established 65536 bind 65536) [ 0.294175] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.294196] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.294290] NET: Registered protocol family 1 [ 0.294295] NET: Registered protocol family 44 [ 0.314907] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x690 took 18724 usecs [ 0.334902] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x690 took 19506 usecs [ 0.334923] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.334937] PCI: CLS 64 bytes, default 64 [ 0.335002] Trying to unpack rootfs image as initramfs... [ 1.794764] Freeing initrd memory: 13896K [ 1.794780] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.794782] software IO TLB: mapped [mem 0xa39c0000-0xa79c0000] (64MB) [ 1.794895] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer [ 1.794895] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 1.794896] RAPL PMU: hw unit of domain package 2^-16 Joules [ 1.795032] check: Scanning for low memory corruption every 60 seconds [ 1.795448] Initialise system trusted keyrings [ 1.795456] Key type blacklist registered [ 1.795496] workingset: timestamp_bits=37 max_order=21 bucket_order=0 [ 1.796779] zbud: loaded [ 1.797252] Platform Keyring initialized [ 1.801576] Key type asymmetric registered [ 1.801577] Asymmetric key parser 'x509' registered [ 1.801584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.801618] io scheduler mq-deadline registered [ 1.801619] io scheduler kyber registered [ 1.801644] io scheduler bfq registered [ 1.802467] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.802493] efifb: probing for efifb [ 1.802505] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override. [ 1.802517] efifb: framebuffer at 0xb0000000, using 5628k, total 5625k [ 1.802518] efifb: mode is 1600x900x32, linelength=6400, pages=1 [ 1.802519] efifb: scrolling: redraw [ 1.802520] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.802604] Console: switching to colour frame buffer device 200x56 [ 1.805815] fb0: EFI VGA frame buffer device [ 1.805823] intel_idle: MWAIT substates: 0x21120 [ 1.805824] intel_idle: v0.4.1 model 0x3A [ 1.805932] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.806199] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.807402] Non-volatile memory driver v1.3 [ 1.807420] Linux agpgart interface v0.103 [ 1.807643] ahci 0000:00:1f.2: version 3.0 [ 1.807799] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.817877] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode [ 1.817879] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 1.827415] scsi host0: ahci [ 1.827688] scsi host1: ahci [ 1.827901] scsi host2: ahci [ 1.828012] scsi host3: ahci [ 1.828102] scsi host4: ahci [ 1.828144] ata1: SATA max UDMA/133 abar m2048@0xc5117000 port 0xc5117100 irq 28 [ 1.828145] ata2: DUMMY [ 1.828145] ata3: DUMMY [ 1.828146] ata4: DUMMY [ 1.828148] ata5: SATA max UDMA/133 abar m2048@0xc5117000 port 0xc5117300 irq 28 [ 1.828213] i8042: PNP: PS/2 Controller [PNP030b:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.831241] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.831245] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.831361] mousedev: PS/2 mouse device common for all mice [ 1.831405] rtc_cmos 00:01: RTC can wake from S4 [ 1.831606] rtc_cmos 00:01: registered as rtc0 [ 1.831620] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.831630] intel_pstate: Intel P-state driver initializing [ 1.831791] ledtrig-cpu: registered to indicate activity on CPUs [ 1.831793] EFI Variables Facility v0.08 2004-May-17 [ 1.847026] hidraw: raw HID events driver (C) Jiri Kosina [ 1.847094] drop_monitor: Initializing network drop monitor service [ 1.847271] NET: Registered protocol family 10 [ 1.852911] Segment Routing with IPv6 [ 1.853111] RAS: Correctable Errors collector initialized. [ 1.853140] microcode: sig=0x306a9, pf=0x10, revision=0x21 [ 1.853145] microcode: Microcode Update Driver: v2.2. [ 1.853150] IPI shorthand broadcast: enabled [ 1.853156] sched_clock: Marking stable (1852733476, 286304)->(1883770752, -30750972) [ 1.853269] registered taskstats version 1 [ 1.853272] Loading compiled-in X.509 certificates [ 1.853305] Loaded X.509 cert 'openSUSE Secure Boot Signkey: c8bdc7ac1a1d85966217fd93ebfc14f4a200b814' [ 1.853322] zswap: loaded using pool lzo/zbud [ 1.853347] page_owner is disabled [ 1.855124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.859280] Key type big_key registered [ 1.862015] Key type encrypted registered [ 1.862018] AppArmor: AppArmor sha1 policy hashing enabled [ 1.862240] ima: No TPM chip found, activating TPM-bypass! [ 1.862243] ima: Allocated hash algorithm: sha256 [ 1.862262] ima: No architecture policies found [ 1.862271] evm: Initialising EVM extended attributes: [ 1.862272] evm: security.selinux [ 1.862273] evm: security.apparmor [ 1.862273] evm: security.ima [ 1.862274] evm: security.capability [ 1.862274] evm: HMAC attrs: 0x1 [ 1.862614] PM: Magic number: 4:821:40 [ 1.862704] rtc_cmos 00:01: setting system clock to 2020-09-11T19:02:02 UTC (1599850922) [ 2.142246] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.143549] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 [ 2.143561] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.145022] ata1.00: configured for UDMA/133 [ 2.145260] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 [ 2.145527] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.145529] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.145544] sd 0:0:0:0: [sda] Write Protect is off [ 2.145545] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.145564] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.195030] sda: sda1 sda2 sda3 [ 2.195518] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.457585] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.459260] ata5.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.20, max UDMA/133 [ 2.460701] ata5.00: configured for UDMA/133 [ 2.463140] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.20 PQ: 0 ANSI: 5 [ 2.559309] psmouse serio1: synaptics: queried max coordinates: x [..5682], y [..4770] [ 2.587563] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1082..] [ 2.587572] psmouse serio1: synaptics: Your touchpad (PNP: SYN2705 SYN0300 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 2.642866] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00/0x0, board id: 1999, fw id: 1106483 [ 2.678293] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 [ 2.682334] Freeing unused decrypted memory: 2040K [ 2.682742] Freeing unused kernel image memory: 2156K [ 2.682807] Write protecting the kernel read-only data: 20480k [ 2.683280] Freeing unused kernel image memory: 2036K [ 2.683625] Freeing unused kernel image memory: 1916K [ 2.683663] Run /init as init process [ 2.728593] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) [ 2.746970] systemd[1]: Detected architecture x86-64. [ 2.746976] systemd[1]: Running in initial RAM disk. [ 2.747019] systemd[1]: No hostname configured. [ 2.747027] systemd[1]: Set hostname to ... [ 2.798753] random: systemd: uninitialized urandom read (16 bytes read) [ 2.798860] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.798950] random: systemd: uninitialized urandom read (16 bytes read) [ 2.798975] systemd[1]: Listening on udev Kernel Socket. [ 2.798989] random: systemd: uninitialized urandom read (16 bytes read) [ 2.799363] systemd[1]: Created slice System Slice. [ 2.799385] systemd[1]: Reached target Slices. [ 2.799723] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. [ 2.807279] alua: device handler registered [ 2.807993] emc: device handler registered [ 2.808753] rdac: device handler registered [ 2.816196] device-mapper: uevent: version 1.0.3 [ 2.822813] tsc: Refined TSC clocksource calibration: 2394.560 MHz [ 2.822819] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns [ 2.822833] clocksource: Switched to clocksource tsc [ 2.822844] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: XXX@XXX [ 2.857107] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.857139] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 3.194999] ACPI: bus type USB registered [ 3.195023] usbcore: registered new interface driver usbfs [ 3.195030] usbcore: registered new interface driver hub [ 3.195053] usbcore: registered new device driver usb [ 3.205035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.206503] ehci-pci: EHCI PCI platform driver [ 3.206663] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.206669] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.206681] ehci-pci 0000:00:1a.0: debug port 2 [ 3.210598] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 3.211447] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc5119000 [ 3.230012] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.230063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 3.230064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.230065] usb usb1: Product: EHCI Host Controller [ 3.230066] usb usb1: Manufacturer: Linux 5.3.18-lp152.36-default ehci_hcd [ 3.230067] usb usb1: SerialNumber: ... [ 3.235603] hub 1-0:1.0: USB hub found [ 3.235615] hub 1-0:1.0: 2 ports detected [ 3.236648] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.236653] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.236664] ehci-pci 0000:00:1d.0: debug port 2 [ 3.240563] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.240577] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc5118000 [ 3.244840] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 3.245270] acpi device:39: registered as cooling_device2 [ 3.245327] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/LNXVIDEO:00/input/input3 [ 3.254823] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.254969] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 3.254971] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.254972] usb usb2: Product: EHCI Host Controller [ 3.254973] usb usb2: Manufacturer: Linux 5.3.18-lp152.36-default ehci_hcd [ 3.254974] usb usb2: SerialNumber: ... [ 3.255104] hub 2-0:1.0: USB hub found [ 3.255112] hub 2-0:1.0: 2 ports detected [ 3.266559] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.266565] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.317318] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.317320] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.325641] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 3.325648] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.325811] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 3.325812] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.325814] usb usb3: Product: xHCI Host Controller [ 3.325815] usb usb3: Manufacturer: Linux 5.3.18-lp152.36-default xhci-hcd [ 3.325816] usb usb3: SerialNumber: ... [ 3.333320] random: crng init done [ 3.333321] random: 7 urandom warning(s) missed due to ratelimiting [ 3.343191] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.343401] hub 3-0:1.0: USB hub found [ 3.343415] hub 3-0:1.0: 4 ports detected [ 3.343954] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.343958] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.343962] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.344010] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 3.344012] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.344013] usb usb4: Product: xHCI Host Controller [ 3.344014] usb usb4: Manufacturer: Linux 5.3.18-lp152.36-default xhci-hcd [ 3.344015] usb usb4: SerialNumber: ... [ 3.344162] hub 4-0:1.0: USB hub found [ 3.344186] hub 4-0:1.0: 4 ports detected [ 3.435574] [drm] radeon kernel modesetting enabled. [ 3.435627] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xb0000000 -> 0xbfffffff [ 3.435628] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xc4000000 -> 0xc401ffff [ 3.435630] checking generic (b0000000 57f000) vs hw (b0000000 10000000) [ 3.435630] fb0: switching to radeondrmfb from EFI VGA [ 3.435724] Console: switching to colour dummy device 80x25 [ 3.435769] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 3.436118] [drm] initializing kernel modesetting (TURKS 0x1002:0x6841 0x104D:0x90AC 0x00). [ 3.436147] ATOM BIOS: Sony/Wistron [ 3.436210] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 3.436211] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 3.436215] [drm] Detected VRAM RAM=1024M, BAR=256M [ 3.436215] [drm] RAM width 128bits DDR [ 3.436270] [TTM] Zone kernel: Available graphics memory: 4044792 KiB [ 3.436271] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 3.436272] [TTM] Initializing pool allocator [ 3.436275] [TTM] Initializing DMA pool allocator [ 3.436292] [drm] radeon: 1024M of VRAM memory ready [ 3.436292] [drm] radeon: 1024M of GTT memory ready. [ 3.436302] [drm] Loading TURKS Microcode [ 3.436373] [drm] Internal thermal controller without fan control [ 3.438445] [drm] radeon: dpm initialized [ 3.438518] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.439673] [drm] PCIE gen 2 link speeds already enabled [ 3.451985] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 3.452217] radeon 0000:01:00.0: WB enabled [ 3.452220] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000003e15a8d7 [ 3.452221] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000004ec7cfb [ 3.452473] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000028d3edd8 [ 3.452478] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.452478] [drm] Driver supports precise vblank timestamp query. [ 3.452479] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 3.452516] radeon 0000:01:00.0: radeon: using MSI. [ 3.452535] [drm] radeon: irq initialized. [ 3.468812] [drm] ring test on 0 succeeded in 1 usecs [ 3.468818] [drm] ring test on 3 succeeded in 3 usecs [ 3.574807] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.590806] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.644733] [drm] ring test on 5 succeeded in 1 usecs [ 3.644737] [drm] UVD initialized successfully. [ 3.644880] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.644923] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.731111] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 3.731114] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.731970] hub 1-1:1.0: USB hub found [ 3.732413] hub 1-1:1.0: 4 ports detected [ 3.747109] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 3.747111] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.747328] hub 2-1:1.0: USB hub found [ 3.747407] hub 2-1:1.0: 4 ports detected [ 4.018870] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 4.129594] usb 1-1.2: New USB device found, idVendor=0489, idProduct=e036, bcdDevice= 0.01 [ 4.129605] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.129606] usb 1-1.2: Product: Bluetooth USB Host Controller [ 4.129608] usb 1-1.2: Manufacturer: Atheros Communications [ 4.129609] usb 1-1.2: SerialNumber: ... [ 4.206889] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 4.294790] raid6: sse2x4 gen() 12255 MB/s [ 4.327973] PM: Image not found (code -22) [ 4.362789] raid6: sse2x4 xor() 6354 MB/s [ 4.430787] raid6: sse2x2 gen() 12238 MB/s [ 4.498788] raid6: sse2x2 xor() 6842 MB/s [ 4.566790] raid6: sse2x1 gen() 10188 MB/s [ 4.634788] raid6: sse2x1 xor() 5913 MB/s [ 4.634789] raid6: using algorithm sse2x4 gen() 12255 MB/s [ 4.634790] raid6: .... xor() 6354 MB/s, rmw enabled [ 4.634791] raid6: using ssse3x2 recovery algorithm [ 4.634867] [drm] ib test on ring 5 succeeded [ 4.637358] xor: measuring software checksum speed [ 4.674788] prefetch64-sse: 15395.000 MB/sec [ 4.698844] [drm] radeon atom DIG backlight initialized [ 4.698847] [drm] Radeon Display Connectors [ 4.698848] [drm] Connector 0: [ 4.698848] [drm] LVDS-1 [ 4.698850] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [ 4.698851] [drm] Encoders: [ 4.698851] [drm] LCD1: INTERNAL_UNIPHY [ 4.698852] [drm] Connector 1: [ 4.698852] [drm] HDMI-A-1 [ 4.698853] [drm] HPD1 [ 4.698854] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 4.698854] [drm] Encoders: [ 4.698855] [drm] DFP1: INTERNAL_UNIPHY1 [ 4.698855] [drm] Connector 2: [ 4.698856] [drm] VGA-1 [ 4.698857] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 4.698857] [drm] Encoders: [ 4.698858] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.714788] generic_sse: 13931.000 MB/sec [ 4.714789] xor: using function: prefetch64-sse (15395.000 MB/sec) [ 4.763378] usb 1-1.3: New USB device found, idVendor=5986, idProduct=02d3, bcdDevice= 0.23 [ 4.763380] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.763381] usb 1-1.3: Product: USB2.0 Camera [ 4.763382] usb 1-1.3: Manufacturer: USB2.0 Camera [ 4.778412] Btrfs loaded, crc32c=crc32c-intel, assert=on [ 4.779533] BTRFS: device fsid HASH_38A-017C-7105-175C-0143B31E3F8B devid 1 transid 7910 /dev/sda2 [ 5.160293] [drm] fb mappable at 0xB0363000 [ 5.160295] [drm] vram apper at 0xB0000000 [ 5.160297] [drm] size 5787648 [ 5.160298] [drm] fb depth is 24 [ 5.160299] [drm] pitch is 6400 [ 5.160504] fbcon: radeondrmfb (fb0) is primary device [ 5.771222] Console: switching to colour frame buffer device 200x56 [ 5.777734] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 5.791093] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 6.112736] BTRFS info (device sda2): disk space caching is enabled [ 6.112739] BTRFS info (device sda2): has skinny extents [ 7.169464] systemd-journald[170]: Received SIGTERM from PID 1 (systemd). [ 7.341116] printk: systemd: 19 output lines suppressed due to ratelimiting [ 11.561078] BTRFS info (device sda2): disk space caching is enabled [ 13.838928] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4 [ 13.840451] ACPI: Lid Switch [LID0] [ 13.840497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 13.840559] ACPI: Power Button [PWRF] [ 13.886860] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM [ 13.887494] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-213) [ 13.887501] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.887523] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213) [ 13.887529] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.887546] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213) [ 13.887552] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.887599] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213) [ 13.887603] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.887604] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 13.887797] ACPI: AC Adapter [ADP1] (on-line) [ 13.888661] battery: ACPI: Battery Slot [BAT0] (battery present) [ 13.954900] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 13.994567] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 13.994570] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM [ 14.300774] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input7 [ 14.300845] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input8 [ 14.313611] sony_laptop: SNC setup done. [ 14.453048] cryptd: max_cpu_qlen set to 1000 [ 14.473944] thermal LNXTHERM:00: registered as thermal_zone0 [ 14.473946] ACPI: Thermal Zone [TZS0] (44 C) [ 14.474250] thermal LNXTHERM:01: registered as thermal_zone1 [ 14.474252] ACPI: Thermal Zone [TZS1] (30 C) [ 14.637883] acer_wmi: Acer Laptop ACPI-WMI Extras [ 14.684920] r8169 0000:0e:00.0: can't disable ASPM; OS doesn't have ASPM control [ 14.695423] libphy: r8169: probed [ 14.695704] r8169 0000:0e:00.0 eth0: RTL8168evl/8111evl, XX:XX:XX:XX:XX:XX, XID 2c9, IRQ 33 [ 14.695706] r8169 0000:0e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 14.837536] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.838125] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.904437] iTCO_vendor_support: vendor-support=0 [ 14.962040] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 14.962087] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 14.962577] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 15.250840] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 15.464992] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.464995] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.464996] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 15.464997] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 15.464998] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 15.465000] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 15.465001] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 15.479516] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 15.479753] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 15.480793] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 16.210544] ath: phy0: ASPM enabled: 0x42 [ 16.210546] ath: EEPROM regdomain: 0x65 [ 16.210547] ath: EEPROM indicates we should expect a direct regpair map [ 16.210549] ath: Country alpha2 being used: 00 [ 16.210549] ath: Regpair used: 0x65 [ 16.211328] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 16.211654] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffaf0480a80000, irq=16 [ 16.390738] intel_rapl_common: Found RAPL domain package [ 16.390739] intel_rapl_common: Found RAPL domain core [ 16.390744] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 17.343484] Bluetooth: Core ver 2.22 [ 17.343502] NET: Registered protocol family 31 [ 17.343503] Bluetooth: HCI device and connection manager initialized [ 17.343507] Bluetooth: HCI socket layer initialized [ 17.343509] Bluetooth: L2CAP socket layer initialized [ 17.343512] Bluetooth: SCO socket layer initialized [ 17.348619] mc: Linux media interface: v0.10 [ 17.395613] systemd-journald[432]: Received request to flush runtime journal from PID 1 [ 17.481243] videodev: Linux video capture interface: v2.00 [ 17.666815] Adding 2097152k swap on /dev/sda3. Priority:-2 extents:1 across:2097152k FS [ 18.131802] usbcore: registered new interface driver btusb [ 18.155648] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:02d3) [ 18.160217] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized! [ 18.160219] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized! [ 18.160220] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 18.160316] input: USB2.0 Camera: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13 [ 18.160434] usbcore: registered new interface driver uvcvideo [ 18.160434] USB Video Class driver (1.1.1) [ 18.412277] usbcore: registered new interface driver ath3k [ 18.603321] usb 1-1.2: USB disconnect, device number 3 [ 18.826801] usb 1-1.2: new full-speed USB device number 5 using ehci-pci [ 21.260327] vboxdrv: loading out-of-tree module taints kernel. [ 21.271209] vboxdrv: Found 2 processor cores [ 21.291250] vboxdrv: TSC mode is Invariant, tentative frequency 2394559703 Hz [ 21.291251] vboxdrv: Successfully loaded version 6.1.10_SUSE (interface 0x002d0001) [ 21.516055] VBoxNetFlt: Successfully started. [ 21.529320] VBoxNetAdp: Successfully started. [ 24.085169] usb 1-1.2: New USB device found, idVendor=0489, idProduct=e036, bcdDevice= 0.02 [ 24.085174] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 24.085176] usb 1-1.2: Product: Bluetooth USB Host Controller [ 24.085178] usb 1-1.2: Manufacturer: Atheros Communications [ 24.085180] usb 1-1.2: SerialNumber: ... [ 24.881484] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.881485] Bluetooth: BNEP filters: protocol multicast [ 24.881489] Bluetooth: BNEP socket layer initialized [ 29.201414] bpfilter: Loaded bpfilter_umh pid 1583 [ 29.201719] Started bpfilter [ 31.149875] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE) [ 31.342781] r8169 0000:0e:00.0 eth0: Link is Down [ 31.775184] NET: Registered protocol family 17 [ 38.760453] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 38.781358] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 38.785476] wlan0: authenticated [ 38.794815] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 38.800353] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 38.800507] wlan0: associated [ 38.800586] ath: EEPROM regdomain: 0x8114 [ 38.800587] ath: EEPROM indicates we should expect a country code [ 38.800588] ath: doing EEPROM country->regdmn map search [ 38.800588] ath: country maps to regdmn code: 0x37 [ 38.800589] ath: Country alpha2 being used: DE [ 38.800590] ath: Regpair used: 0x37 [ 38.800591] ath: regdomain 0x8114 dynamically updated by country element [ 38.853399] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 38.855186] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 57.880364] Bluetooth: RFCOMM TTY layer initialized [ 57.880370] Bluetooth: RFCOMM socket layer initialized [ 57.880375] Bluetooth: RFCOMM ver 1.11 [ 70.326808] fuse: init (API version 7.31) [ 667.493471] BTRFS info (device sda2): qgroup scan completed (inconsistency flag cleared) [ 2802.395314] PM: suspend entry (deep) [ 2804.247732] Filesystems sync: 1.852 seconds [ 2804.439418] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 2804.441034] OOM killer disabled. [ 2804.441035] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2804.442375] printk: Suspending console(s) (use no_console_suspend to debug) [ 2804.442652] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 2804.460749] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2804.460958] sd 0:0:0:0: [sda] Stopping disk [ 2805.615663] ACPI: EC: interrupt blocked [ 2805.635042] ACPI: Preparing to enter system sleep state S3 [ 2805.636248] ACPI: EC: event blocked [ 2805.636248] ACPI: EC: EC stopped [ 2805.636249] PM: Saving platform NVS memory [ 2805.636259] Disabling non-boot CPUs ... [ 2805.636577] IRQ 16: no longer affine to CPU1 [ 2805.636583] IRQ 23: no longer affine to CPU1 [ 2805.637592] smpboot: CPU 1 is now offline [ 2805.638419] ACPI: Low-level resume complete [ 2805.638467] ACPI: EC: EC started [ 2805.638468] PM: Restoring platform NVS memory [ 2805.639713] Enabling non-boot CPUs ... [ 2805.639753] x86: Booting SMP configuration: [ 2805.639754] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2805.644708] CPU1 is up [ 2805.645126] ACPI: Waking up from system sleep state S3 [ 2805.648833] ACPI: EC: interrupt unblocked [ 2805.688020] ACPI: EC: event unblocked [ 2805.691989] ath: phy0: ASPM enabled: 0x42 [ 2805.693192] [drm] PCIE gen 2 link speeds already enabled [ 2805.699093] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 2805.699174] radeon 0000:01:00.0: WB enabled [ 2805.699176] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000003e15a8d7 [ 2805.699178] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000004ec7cfb [ 2805.699431] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000028d3edd8 [ 2805.715769] [drm] ring test on 0 succeeded in 1 usecs [ 2805.715775] [drm] ring test on 3 succeeded in 3 usecs [ 2805.726815] sd 0:0:0:0: [sda] Starting disk [ 2805.891653] [drm] ring test on 5 succeeded in 1 usecs [ 2805.891656] [drm] UVD initialized successfully. [ 2805.891754] [drm] ib test on ring 0 succeeded in 0 usecs [ 2805.891841] [drm] ib test on ring 3 succeeded in 0 usecs [ 2806.037834] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2806.041410] ata5.00: configured for UDMA/133 [ 2806.376375] psmouse serio1: synaptics: queried max coordinates: x [..5682], y [..4770] [ 2806.404510] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1082..] [ 2806.567681] [drm] ib test on ring 5 succeeded [ 2807.303921] OOM killer enabled. [ 2807.303923] Restarting tasks ... done. [ 2807.319542] PM: suspend exit [ 2807.480230] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 2807.629121] usb 3-1: New USB device found, idVendor=058f, idProduct=6377, bcdDevice= 1.00 [ 2807.629124] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2807.629125] usb 3-1: Product: Flash Card Reader/Writer [ 2807.629126] usb 3-1: Manufacturer: Generic [ 2807.629127] usb 3-1: SerialNumber: ... [ 2808.001080] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE) [ 2808.188712] r8169 0000:0e:00.0 eth0: Link is Down [ 2808.263099] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2808.265248] ata1.00: configured for UDMA/133 [ 2808.365005] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2808.365235] scsi host5: usb-storage 3-1:1.0 [ 2808.365323] usbcore: registered new interface driver usb-storage [ 2808.388157] usbcore: registered new interface driver uas [ 2809.384507] scsi 5:0:0:0: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 4 [ 2809.385271] scsi 5:0:0:1: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 4 [ 2809.386064] scsi 5:0:0:2: Direct-Access Generic- MS/MS-PRO 1.03 PQ: 0 ANSI: 4 CCS [ 2809.386797] scsi 5:0:0:3: Direct-Access Generic- xD-Picture 1.02 PQ: 0 ANSI: 4 [ 2809.387876] scsi 5:0:0:4: Direct-Access Generic- MicroSD/M2 1.08 PQ: 0 ANSI: 4 [ 2809.388086] scsi 5:0:0:0: Attached scsi generic sg2 type 0 [ 2809.388182] scsi 5:0:0:1: Attached scsi generic sg3 type 0 [ 2809.388268] scsi 5:0:0:2: Attached scsi generic sg4 type 0 [ 2809.388506] scsi 5:0:0:3: Attached scsi generic sg5 type 0 [ 2809.388599] scsi 5:0:0:4: Attached scsi generic sg6 type 0 [ 2809.774563] sd 5:0:0:1: [sdc] 62412800 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 2809.776539] sd 5:0:0:1: [sdc] Write Protect is off [ 2809.776541] sd 5:0:0:1: [sdc] Mode Sense: 23 00 00 00 [ 2809.778554] sd 5:0:0:1: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 2809.780409] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 2810.228939] sd 5:0:0:4: [sdf] 3981312 512-byte logical blocks: (2.04 GB/1.90 GiB) [ 2810.230932] sd 5:0:0:4: [sdf] Write Protect is off [ 2810.230934] sd 5:0:0:4: [sdf] Mode Sense: 23 00 00 00 [ 2810.232931] sd 5:0:0:4: [sdf] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 2810.233341] sd 5:0:0:3: [sde] Attached SCSI removable disk [ 2810.244540] sd 5:0:0:2: [sdd] Attached SCSI removable disk [ 2810.270172] sdf: sdf1 sdf2 [ 2810.274624] sd 5:0:0:1: [sdc] Attached SCSI removable disk [ 2810.283634] sd 5:0:0:4: [sdf] Attached SCSI removable disk [ 2810.289204] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 2810.316820] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2810.320508] wlan0: authenticated [ 2810.335573] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2810.341806] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 2810.341956] wlan0: associated [ 2810.342025] ath: EEPROM regdomain: 0x8114 [ 2810.342026] ath: EEPROM indicates we should expect a country code [ 2810.342026] ath: doing EEPROM country->regdmn map search [ 2810.342027] ath: country maps to regdmn code: 0x37 [ 2810.342028] ath: Country alpha2 being used: DE [ 2810.342028] ath: Regpair used: 0x37 [ 2810.342029] ath: regdomain 0x8114 dynamically updated by country element [ 2810.354283] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 2810.371341] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2818.105610] PM: suspend entry (deep) [ 2819.432962] Filesystems sync: 1.327 seconds [ 2819.617635] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 2819.619264] OOM killer disabled. [ 2819.619264] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2819.620639] printk: Suspending console(s) (use no_console_suspend to debug) [ 2819.620909] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 2819.643665] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2819.643889] sd 0:0:0:0: [sda] Stopping disk [ 2820.624362] ACPI: EC: interrupt blocked [ 2820.644078] ACPI: Preparing to enter system sleep state S3 [ 2820.645798] ACPI: EC: event blocked [ 2820.645799] ACPI: EC: EC stopped [ 2820.645800] PM: Saving platform NVS memory [ 2820.645816] Disabling non-boot CPUs ... [ 2820.647281] smpboot: CPU 1 is now offline [ 2820.648328] ACPI: Low-level resume complete [ 2820.648377] ACPI: EC: EC started [ 2820.648378] PM: Restoring platform NVS memory [ 2820.649604] Enabling non-boot CPUs ... [ 2820.649646] x86: Booting SMP configuration: [ 2820.649647] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 2820.654706] CPU1 is up [ 2820.655125] ACPI: Waking up from system sleep state S3 [ 2820.658846] ACPI: EC: interrupt unblocked [ 2820.696930] ACPI: EC: event unblocked [ 2820.697156] ath: phy0: ASPM enabled: 0x42 [ 2820.702369] [drm] PCIE gen 2 link speeds already enabled [ 2820.708310] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 2820.708422] radeon 0000:01:00.0: WB enabled [ 2820.708425] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000003e15a8d7 [ 2820.708426] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000004ec7cfb [ 2820.708687] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000028d3edd8 [ 2820.709238] sd 0:0:0:0: [sda] Starting disk [ 2820.724886] [drm] ring test on 0 succeeded in 1 usecs [ 2820.724891] [drm] ring test on 3 succeeded in 3 usecs [ 2820.900781] [drm] ring test on 5 succeeded in 1 usecs [ 2820.900785] [drm] UVD initialized successfully. [ 2820.900877] [drm] ib test on ring 0 succeeded in 0 usecs [ 2820.900963] [drm] ib test on ring 3 succeeded in 0 usecs [ 2821.034781] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2821.038375] ata5.00: configured for UDMA/133 [ 2821.392872] psmouse serio1: synaptics: queried max coordinates: x [..5682], y [..4770] [ 2821.420700] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1082..] [ 2821.576609] [drm] ib test on ring 5 succeeded [ 2822.311149] OOM killer enabled. [ 2822.311151] Restarting tasks ... done. [ 2822.362522] PM: suspend exit [ 2823.182577] sdf: sdf1 sdf2 [ 2823.316514] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2823.318966] ata1.00: configured for UDMA/133 [ 2823.403181] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE) [ 2823.770007] r8169 0000:0e:00.0 eth0: Link is Down [ 2825.895074] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 2825.963101] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2825.966509] wlan0: authenticated [ 2825.972776] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2825.979997] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 2825.980144] wlan0: associated [ 2825.980212] ath: EEPROM regdomain: 0x8114 [ 2825.980212] ath: EEPROM indicates we should expect a country code [ 2825.980213] ath: doing EEPROM country->regdmn map search [ 2825.980214] ath: country maps to regdmn code: 0x37 [ 2825.980214] ath: Country alpha2 being used: DE [ 2825.980215] ath: Regpair used: 0x37 [ 2825.980216] ath: regdomain 0x8114 dynamically updated by country element [ 2826.004713] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2826.080595] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 4370.886732] PM: suspend entry (deep) [ 4372.192681] Filesystems sync: 1.305 seconds [ 4372.377689] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 4372.379333] OOM killer disabled. [ 4372.379334] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4372.380651] printk: Suspending console(s) (use no_console_suspend to debug) [ 4372.381296] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 4372.399393] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4372.399609] sd 0:0:0:0: [sda] Stopping disk [ 4373.373307] ACPI: EC: interrupt blocked [ 4373.392799] ACPI: Preparing to enter system sleep state S3 [ 4373.394128] ACPI: EC: event blocked [ 4373.394129] ACPI: EC: EC stopped [ 4373.394129] PM: Saving platform NVS memory [ 4373.394139] Disabling non-boot CPUs ... [ 4373.394477] IRQ 28: no longer affine to CPU1 [ 4373.394480] IRQ 30: no longer affine to CPU1 [ 4373.394483] IRQ 31: no longer affine to CPU1 [ 4373.395487] smpboot: CPU 1 is now offline [ 4373.396253] ACPI: Low-level resume complete [ 4373.396300] ACPI: EC: EC started [ 4373.396301] PM: Restoring platform NVS memory [ 4373.397577] Enabling non-boot CPUs ... [ 4373.397618] x86: Booting SMP configuration: [ 4373.397619] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 4373.402794] CPU1 is up [ 4373.403228] ACPI: Waking up from system sleep state S3 [ 4373.407575] ACPI: EC: interrupt unblocked [ 4373.445728] ACPI: EC: event unblocked [ 4373.449270] ath: phy0: ASPM enabled: 0x42 [ 4373.450840] [drm] PCIE gen 2 link speeds already enabled [ 4373.456873] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 4373.456954] radeon 0000:01:00.0: WB enabled [ 4373.456957] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000003e15a8d7 [ 4373.456958] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000004ec7cfb [ 4373.457212] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000028d3edd8 [ 4373.461517] sd 0:0:0:0: [sda] Starting disk [ 4373.473503] [drm] ring test on 0 succeeded in 0 usecs [ 4373.473509] [drm] ring test on 3 succeeded in 3 usecs [ 4373.649394] [drm] ring test on 5 succeeded in 1 usecs [ 4373.649398] [drm] UVD initialized successfully. [ 4373.649492] [drm] ib test on ring 0 succeeded in 0 usecs [ 4373.649578] [drm] ib test on ring 3 succeeded in 0 usecs [ 4373.783513] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4373.787093] ata5.00: configured for UDMA/133 [ 4374.146105] psmouse serio1: synaptics: queried max coordinates: x [..5682], y [..4770] [ 4374.174268] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1082..] [ 4374.345371] [drm] ib test on ring 5 succeeded [ 4375.079773] OOM killer enabled. [ 4375.079775] Restarting tasks ... done. [ 4375.128881] PM: suspend exit [ 4375.946085] sdf: sdf1 sdf2 [ 4375.973727] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE) [ 4376.057275] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4376.059282] ata1.00: configured for UDMA/133 [ 4376.171997] r8169 0000:0e:00.0 eth0: Link is Down [ 4378.366871] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 4378.405687] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 4378.410450] wlan0: authenticated [ 4378.429267] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 4378.435534] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 4378.435681] wlan0: associated [ 4378.435792] ath: EEPROM regdomain: 0x8114 [ 4378.435793] ath: EEPROM indicates we should expect a country code [ 4378.435794] ath: doing EEPROM country->regdmn map search [ 4378.435794] ath: country maps to regdmn code: 0x37 [ 4378.435795] ath: Country alpha2 being used: DE [ 4378.435796] ath: Regpair used: 0x37 [ 4378.435797] ath: regdomain 0x8114 dynamically updated by country element [ 4378.460891] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4378.508918] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 4380.423346] PM: suspend entry (deep) [ 4382.839309] Filesystems sync: 2.415 seconds [ 4383.030808] Freezing user space processes ... (elapsed 0.710 seconds) done. [ 4383.741470] OOM killer disabled. [ 4383.741471] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4383.742896] printk: Suspending console(s) (use no_console_suspend to debug) [ 4383.743175] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 4383.769322] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 4383.769505] sd 0:0:0:0: [sda] Stopping disk [ 4384.710001] ACPI: EC: interrupt blocked [ 4384.729597] ACPI: Preparing to enter system sleep state S3 [ 4384.731503] ACPI: EC: event blocked [ 4384.731504] ACPI: EC: EC stopped [ 4384.731505] PM: Saving platform NVS memory [ 4384.731521] Disabling non-boot CPUs ... [ 4384.732987] smpboot: CPU 1 is now offline [ 4384.733704] ACPI: Low-level resume complete [ 4384.733752] ACPI: EC: EC started [ 4384.733752] PM: Restoring platform NVS memory [ 4384.734971] Enabling non-boot CPUs ... [ 4384.735014] x86: Booting SMP configuration: [ 4384.735014] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 4384.740189] CPU1 is up [ 4384.740606] ACPI: Waking up from system sleep state S3 [ 4384.744613] ACPI: EC: interrupt unblocked [ 4384.782553] ACPI: EC: event unblocked [ 4384.782769] ath: phy0: ASPM enabled: 0x42 [ 4384.788022] [drm] PCIE gen 2 link speeds already enabled [ 4384.794040] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 4384.794135] radeon 0000:01:00.0: WB enabled [ 4384.794138] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000003e15a8d7 [ 4384.794139] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000004ec7cfb [ 4384.794947] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000028d3edd8 [ 4384.804087] sd 0:0:0:0: [sda] Starting disk [ 4384.811434] [drm] ring test on 0 succeeded in 1 usecs [ 4384.811440] [drm] ring test on 3 succeeded in 3 usecs [ 4384.987323] [drm] ring test on 5 succeeded in 1 usecs [ 4384.987327] [drm] UVD initialized successfully. [ 4384.987420] [drm] ib test on ring 0 succeeded in 0 usecs [ 4384.987506] [drm] ib test on ring 3 succeeded in 0 usecs [ 4385.108314] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4385.111909] ata5.00: configured for UDMA/133 [ 4385.479524] psmouse serio1: synaptics: queried max coordinates: x [..5682], y [..4770] [ 4385.507637] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1082..] [ 4385.642142] [drm] ib test on ring 5 succeeded [ 4386.376507] OOM killer enabled. [ 4386.376509] Restarting tasks ... done. [ 4386.398165] PM: suspend exit [ 4387.267643] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE) [ 4387.313706] sdf: sdf1 sdf2 [ 4387.358040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4387.360885] ata1.00: configured for UDMA/133 [ 4387.467027] r8169 0000:0e:00.0 eth0: Link is Down [ 4389.583426] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 4389.607278] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 4389.612279] wlan0: authenticated [ 4389.620254] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 4389.625892] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 4389.626048] wlan0: associated [ 4389.626217] ath: EEPROM regdomain: 0x8114 [ 4389.626218] ath: EEPROM indicates we should expect a country code [ 4389.626219] ath: doing EEPROM country->regdmn map search [ 4389.626219] ath: country maps to regdmn code: 0x37 [ 4389.626220] ath: Country alpha2 being used: DE [ 4389.626221] ath: Regpair used: 0x37 [ 4389.626222] ath: regdomain 0x8114 dynamically updated by country element [ 4389.651499] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4389.722078] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 7839.195996] PM: suspend entry (deep) [ 7840.373082] Filesystems sync: 1.177 seconds [ 7840.581842] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7840.583465] OOM killer disabled. [ 7840.583466] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7840.584782] printk: Suspending console(s) (use no_console_suspend to debug) [ 7840.585277] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 7840.603264] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7840.603460] sd 0:0:0:0: [sda] Stopping disk [ 7841.606735] ACPI: EC: interrupt blocked [ 7841.626265] ACPI: Preparing to enter system sleep state S3 [ 7841.627497] ACPI: EC: event blocked [ 7841.627497] ACPI: EC: EC stopped [ 7841.627498] PM: Saving platform NVS memory [ 7841.627508] Disabling non-boot CPUs ... [ 7841.627853] IRQ 28: no longer affine to CPU1 [ 7841.627865] IRQ 30: no longer affine to CPU1 [ 7841.627866] IRQ 31: no longer affine to CPU1 [ 7841.628871] smpboot: CPU 1 is now offline [ 7841.629610] ACPI: Low-level resume complete [ 7841.629657] ACPI: EC: EC started [ 7841.629657] PM: Restoring platform NVS memory [ 7841.630939] Enabling non-boot CPUs ... [ 7841.630977] x86: Booting SMP configuration: [ 7841.630978] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7841.635886] CPU1 is up [ 7841.636300] ACPI: Waking up from system sleep state S3 [ 7841.640244] ACPI: EC: interrupt unblocked [ 7841.679097] ACPI: EC: event unblocked [ 7841.679775] ath: phy0: ASPM enabled: 0x42 [ 7841.686156] [drm] PCIE gen 2 link speeds already enabled [ 7841.692354] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 7841.692436] radeon 0000:01:00.0: WB enabled [ 7841.692439] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000003e15a8d7 [ 7841.692440] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000004ec7cfb [ 7841.692693] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000028d3edd8 [ 7841.697466] sd 0:0:0:0: [sda] Starting disk [ 7841.708899] [drm] ring test on 0 succeeded in 1 usecs [ 7841.708905] [drm] ring test on 3 succeeded in 3 usecs [ 7841.894742] [drm] ring test on 5 succeeded in 1 usecs [ 7841.894745] [drm] UVD initialized successfully. [ 7841.894838] [drm] ib test on ring 0 succeeded in 0 usecs [ 7841.894923] [drm] ib test on ring 3 succeeded in 0 usecs [ 7842.033003] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7842.036579] ata5.00: configured for UDMA/133 [ 7842.378595] psmouse serio1: synaptics: queried max coordinates: x [..5682], y [..4770] [ 7842.406299] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1082..] [ 7842.570841] [drm] ib test on ring 5 succeeded [ 7844.310778] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7844.313221] ata1.00: configured for UDMA/133 [ 7844.616321] OOM killer enabled. [ 7844.616324] Restarting tasks ... done. [ 7844.662827] usb 3-1: USB disconnect, device number 2 [ 7844.686800] PM: suspend exit [ 7847.272403] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE) [ 7847.496357] r8169 0000:0e:00.0 eth0: Link is Down [ 7849.665232] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 7849.711892] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 7849.716274] wlan0: authenticated [ 7849.731359] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 7849.737185] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 7849.737331] wlan0: associated [ 7849.737399] ath: EEPROM regdomain: 0x8114 [ 7849.737400] ath: EEPROM indicates we should expect a country code [ 7849.737401] ath: doing EEPROM country->regdmn map search [ 7849.737401] ath: country maps to regdmn code: 0x37 [ 7849.737402] ath: Country alpha2 being used: DE [ 7849.737403] ath: Regpair used: 0x37 [ 7849.737403] ath: regdomain 0x8114 dynamically updated by country element [ 7849.769428] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 7849.824600] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 7945.767228] r8169 0000:0e:00.0 eth0: Link is Down [ 7950.694648] PM: suspend entry (deep) [ 7953.672768] Filesystems sync: 2.978 seconds [ 7953.891309] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7953.893003] OOM killer disabled. [ 7953.893004] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7953.894431] printk: Suspending console(s) (use no_console_suspend to debug) [ 7953.894636] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 7953.913392] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7953.913656] sd 0:0:0:0: [sda] Stopping disk [ 7954.847588] ACPI: EC: interrupt blocked [ 7954.867046] ACPI: Preparing to enter system sleep state S3 [ 7954.868405] ACPI: EC: event blocked [ 7954.868405] ACPI: EC: EC stopped [ 7954.868406] PM: Saving platform NVS memory [ 7954.868416] Disabling non-boot CPUs ... [ 7954.868750] IRQ 28: no longer affine to CPU1 [ 7954.868754] IRQ 31: no longer affine to CPU1 [ 7954.869758] smpboot: CPU 1 is now offline [ 7954.870493] ACPI: Low-level resume complete [ 7954.870540] ACPI: EC: EC started [ 7954.870541] PM: Restoring platform NVS memory [ 7954.871802] Enabling non-boot CPUs ... [ 7954.871843] x86: Booting SMP configuration: [ 7954.871844] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 7954.877113] CPU1 is up [ 7954.877528] ACPI: Waking up from system sleep state S3 [ 7954.881812] ACPI: EC: interrupt unblocked [ 7954.919832] ACPI: EC: event unblocked [ 7954.920077] ath: phy0: ASPM enabled: 0x42 [ 7954.925152] [drm] PCIE gen 2 link speeds already enabled [ 7954.931143] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 7954.931240] radeon 0000:01:00.0: WB enabled [ 7954.931243] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000003e15a8d7 [ 7954.931244] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000004ec7cfb [ 7954.932107] sd 0:0:0:0: [sda] Starting disk [ 7954.932176] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000028d3edd8 [ 7954.948653] [drm] ring test on 0 succeeded in 1 usecs [ 7954.948659] [drm] ring test on 3 succeeded in 3 usecs [ 7955.124545] [drm] ring test on 5 succeeded in 1 usecs [ 7955.124549] [drm] UVD initialized successfully. [ 7955.124645] [drm] ib test on ring 0 succeeded in 0 usecs [ 7955.124731] [drm] ib test on ring 3 succeeded in 0 usecs [ 7955.257800] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7955.261363] ata5.00: configured for UDMA/133 [ 7955.616915] psmouse serio1: synaptics: queried max coordinates: x [..5682], y [..4770] [ 7955.645176] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1082..] [ 7955.787633] [drm] ib test on ring 5 succeeded [ 7956.521996] OOM killer enabled. [ 7956.521998] Restarting tasks ... done. [ 7956.582870] PM: suspend exit [ 7957.543653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7957.545968] ata1.00: configured for UDMA/133 [ 7959.488057] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE) [ 7959.665351] r8169 0000:0e:00.0 eth0: Link is Down [ 7961.905138] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 7961.960764] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 7961.963814] wlan0: authenticated [ 7962.007505] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 7962.014448] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 7962.014599] wlan0: associated [ 7962.014669] ath: EEPROM regdomain: 0x8114 [ 7962.014669] ath: EEPROM indicates we should expect a country code [ 7962.014670] ath: doing EEPROM country->regdmn map search [ 7962.014671] ath: country maps to regdmn code: 0x37 [ 7962.014672] ath: Country alpha2 being used: DE [ 7962.014672] ath: Regpair used: 0x37 [ 7962.014673] ath: regdomain 0x8114 dynamically updated by country element [ 7962.030725] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 7962.039758] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 9089.392053] r8169 0000:0e:00.0 eth0: Link is Down [ 9089.502825] PM: suspend entry (deep) [ 9090.403598] Filesystems sync: 0.900 seconds [ 9090.920767] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9090.922264] OOM killer disabled. [ 9090.922265] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9090.923506] printk: Suspending console(s) (use no_console_suspend to debug) [ 9090.923691] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9090.941857] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9090.942275] sd 0:0:0:0: [sda] Stopping disk [ 9091.540551] ACPI: EC: interrupt blocked [ 9091.559811] ACPI: Preparing to enter system sleep state S3 [ 9091.561511] ACPI: EC: event blocked [ 9091.561512] ACPI: EC: EC stopped [ 9091.561513] PM: Saving platform NVS memory [ 9091.561528] Disabling non-boot CPUs ... [ 9091.561989] IRQ 16: no longer affine to CPU1 [ 9091.563004] smpboot: CPU 1 is now offline [ 9091.563798] ACPI: Low-level resume complete [ 9091.563844] ACPI: EC: EC started [ 9091.563845] PM: Restoring platform NVS memory [ 9091.565096] Enabling non-boot CPUs ... [ 9091.565137] x86: Booting SMP configuration: [ 9091.565138] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9091.570002] CPU1 is up [ 9091.570419] ACPI: Waking up from system sleep state S3 [ 9091.574238] ACPI: EC: interrupt unblocked [ 9091.612713] ACPI: EC: event unblocked [ 9091.612935] ath: phy0: ASPM enabled: 0x42 [ 9091.618336] [drm] PCIE gen 2 link speeds already enabled [ 9091.624538] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 9091.624619] radeon 0000:01:00.0: WB enabled [ 9091.624622] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x000000003e15a8d7 [ 9091.624624] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000004ec7cfb [ 9091.624877] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0000000028d3edd8 [ 9091.641086] [drm] ring test on 0 succeeded in 1 usecs [ 9091.641091] [drm] ring test on 3 succeeded in 3 usecs [ 9091.650613] sd 0:0:0:0: [sda] Starting disk [ 9091.826915] [drm] ring test on 5 succeeded in 1 usecs [ 9091.826919] [drm] UVD initialized successfully. [ 9091.827010] [drm] ib test on ring 0 succeeded in 0 usecs [ 9091.827096] [drm] ib test on ring 3 succeeded in 0 usecs [ 9091.946540] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9091.950118] ata5.00: configured for UDMA/133 [ 9092.301814] psmouse serio1: synaptics: queried max coordinates: x [..5682], y [..4770] [ 9092.329625] psmouse serio1: synaptics: queried min coordinates: x [1260..], y [1082..] [ 9092.492382] [drm] ib test on ring 5 succeeded [ 9093.226490] OOM killer enabled. [ 9093.226492] Restarting tasks ... done. [ 9093.233308] PM: suspend exit [ 9094.043632] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE) [ 9094.232294] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9094.234504] ata1.00: configured for UDMA/133 [ 9094.242232] r8169 0000:0e:00.0 eth0: Link is Down [ 9096.261597] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 9096.276717] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 9096.282061] wlan0: authenticated [ 9096.288261] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 9096.294085] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 9096.294229] wlan0: associated [ 9096.294291] ath: EEPROM regdomain: 0x8114 [ 9096.294292] ath: EEPROM indicates we should expect a country code [ 9096.294293] ath: doing EEPROM country->regdmn map search [ 9096.294293] ath: country maps to regdmn code: 0x37 [ 9096.294294] ath: Country alpha2 being used: DE [ 9096.294294] ath: Regpair used: 0x37 [ 9096.294295] ath: regdomain 0x8114 dynamically updated by country element [ 9096.319971] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 9096.382981] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX