[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.34-nrj-desktop-3rosa (XXX@XXX) (gcc version 4.7.4 20140107 (ROSA) (Linaro GCC 4.7-2014.01) ) #1 SMP PREEMPT Fri Apr 18 20:11:49 UTC 2014 [ 0.000000] Command line: initrd=initrd0.img root=live:CDLABEL=ROSA.FRESH.KDE.R3.x86_64 rootfstype=auto ro rd.live.image rhgb splash=silent logo.nologo rd.luks=0 rd.md=0 rd.dm=0 quiet BOOT_IMAGE=vmlinuz0 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffb7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffb8000-0x00000000bffbffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffcdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bffce000-0x00000000bfffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: ASUSTeK Computer Inc. X71SL /X71SL , BIOS 204 09/24/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xbffb8 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01eec000, 0x01eecfff] PGTABLE [ 0.000000] BRK [0x01eed000, 0x01eedfff] PGTABLE [ 0.000000] BRK [0x01eee000, 0x01eeefff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfdfffff] [ 0.000000] [mem 0xbfc00000-0xbfdfffff] page 2M [ 0.000000] BRK [0x01eef000, 0x01eeffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbc000000-0xbfbfffff] [ 0.000000] [mem 0xbc000000-0xbfbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff] [ 0.000000] [mem 0x80000000-0xbbffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0xbfe00000-0xbffb7fff] [ 0.000000] [mem 0xbfe00000-0xbffb7fff] page 4k [ 0.000000] BRK [0x01ef0000, 0x01ef0fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7e7f6000-0x7fffefff] [ 0.000000] ACPI: RSDP 00000000000f98a0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bffc0000 0004C (v01 _ASUS_ Notebook 20080924 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bffc0200 00084 (v01 092408 FACP1052 20080924 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bffc0680 094EF (v01 X71SL X71SL001 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bffce000 00040 [ 0.000000] ACPI: APIC 00000000bffc0390 0005C (v01 092408 APIC1052 20080924 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bffc0430 0003C (v01 092408 OEMMCFG 20080924 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000bffc0470 00176 (v01 _ASUS_ Notebook 20080924 MSFT 00000097) [ 0.000000] ACPI: ECDT 00000000bffc0620 00055 (v01 092408 OEMECDT 20080924 MSFT 00000097) [ 0.000000] ACPI: DBGP 00000000bffc03f0 00034 (v01 092408 DBGP1052 20080924 MSFT 00000097) [ 0.000000] ACPI: BOOT 00000000bffc05f0 00028 (v01 092408 BOOT1052 20080924 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bffce040 00071 (v01 092408 OEMB1052 20080924 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bffc9b70 00038 (v01 092408 OEMHPET 20080924 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bffcecc0 004E6 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bffb7fff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbffb7fff] [ 0.000000] NODE_DATA [mem 0xbffb4000-0xbffb7fff] [ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc400000-ffff8800bf3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbffb7fff] [ 0.000000] On node 0 totalpages: 786262 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12223 pages used for memmap [ 0.000000] DMA32 zone: 782264 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10398201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfa00000 s85376 r8192 d21120 u1048576 [ 0.000000] pcpu-alloc: s85376 r8192 d21120 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773954 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: initrd=initrd0.img root=live:CDLABEL=ROSA.FRESH.KDE.R3.x86_64 rootfstype=auto ro rd.live.image rhgb splash=silent logo.nologo rd.luks=0 rd.md=0 rd.dm=0 quiet BOOT_IMAGE=vmlinuz0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3055408k/3145440k available (6273k kernel code, 392k absent, 89640k reserved, 6850k data, 1216k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 1999.419 MHz processor [ 0.002007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3998.83 BogoMIPS (lpj=1999419) [ 0.002013] pid_max: default: 32768 minimum: 301 [ 0.002054] Security Framework initialized [ 0.002093] TOMOYO Linux initialized [ 0.002553] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009177] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012473] Mount-cache hash table entries: 256 [ 0.013193] Initializing cgroup subsys devices [ 0.013199] Initializing cgroup subsys freezer [ 0.013203] Initializing cgroup subsys net_cls [ 0.013205] Initializing cgroup subsys blkio [ 0.013208] Initializing cgroup subsys bfqio [ 0.013272] CPU: Physical Processor ID: 0 [ 0.013274] CPU: Processor Core ID: 0 [ 0.013278] mce: CPU supports 6 MCE banks [ 0.013293] CPU0: Thermal monitoring handled by SMI [ 0.013310] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift: -1 [ 0.013449] Freeing SMP alternatives: 20k freed [ 0.015618] ACPI: Core revision 20130328 [ 0.021627] ACPI: All ACPI Tables successfully acquired [ 0.022008] ftrace: allocating 22875 entries in 90 pages [ 0.031475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.042054] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (fam: 06, model: 17, stepping: 06) [ 0.043000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.043000] ... version: 2 [ 0.043000] ... bit width: 40 [ 0.043000] ... generic registers: 2 [ 0.043000] ... value mask: 000000ffffffffff [ 0.043000] ... max period: 000000007fffffff [ 0.043000] ... fixed-purpose events: 3 [ 0.043000] ... event mask: 0000000700000003 [ 0.052099] smpboot: Booting Node 0, Processors #1 OK [ 0.003000] CPU1: Thermal monitoring handled by SMI [ 0.064065] Brought up 2 CPUs [ 0.064071] smpboot: Total of 2 processors activated (7997.67 BogoMIPS) [ 0.065168] devtmpfs: initialized [ 0.067048] PM: Registering ACPI NVS region [mem 0xbffb8000-0xbffbffff] (32768 bytes) [ 0.067052] PM: Registering ACPI NVS region [mem 0xbffce000-0xbfffffff] (204800 bytes) [ 0.068590] xor: measuring software checksum speed [ 0.078552] prefetch64-sse: 6540.000 MB/sec [ 0.088552] generic_sse: 5780.000 MB/sec [ 0.088554] xor: using function: prefetch64-sse (6540.000 MB/sec) [ 0.088576] RTC time: 8:57:01, date: 06/14/14 [ 0.088646] NET: Registered protocol family 16 [ 0.088888] ACPI: bus type PCI registered [ 0.088978] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.088982] PCI: not using MMCONFIG [ 0.088985] PCI: Using configuration type 1 for base access [ 0.090077] bio: create slab <bio-0> at 0 [ 0.107006] raid6: sse2x1 2898 MB/s [ 0.124020] raid6: sse2x2 3222 MB/s [ 0.141003] raid6: sse2x4 4562 MB/s [ 0.141005] raid6: using algorithm sse2x4 (4562 MB/s) [ 0.141007] raid6: using ssse3x2 recovery algorithm [ 0.141066] ACPI: Added _OSI(Module Device) [ 0.141069] ACPI: Added _OSI(Processor Device) [ 0.141072] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.141074] ACPI: Added _OSI(Processor Aggregator Device) [ 0.142706] ACPI: EC: EC description table is found, configuring boot EC [ 0.144536] ACPI: Executed 1 blocks of module-level executable AML code [ 0.147340] ACPI: SSDT 00000000bffce390 001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.148243] ACPI: Dynamic OEM Table Load: [ 0.148248] ACPI: SSDT (null) 001C0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.148408] ACPI: SSDT 00000000bffce5e0 006D9 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.148804] ACPI: Dynamic OEM Table Load: [ 0.148808] ACPI: SSDT (null) 006D9 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.149082] ACPI: SSDT 00000000bffce2c0 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.149487] ACPI: Dynamic OEM Table Load: [ 0.149491] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.149592] ACPI: SSDT 00000000bffce550 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.149989] ACPI: Dynamic OEM Table Load: [ 0.149992] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.150209] ACPI: Interpreter enabled [ 0.150219] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.150226] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.150247] ACPI: (supports S0 S3 S4 S5) [ 0.150250] ACPI: Using IOAPIC for interrupt routing [ 0.150285] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.150926] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.175968] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.176089] ACPI: No dock devices found. [ 0.182968] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.183331] PCI host bridge to bus 0000:00 [ 0.183337] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.183340] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.183344] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.183347] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.183350] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.183354] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 0.183357] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.183371] pci 0000:00:00.0: [1039:0671] type 00 class 0x060000 [ 0.183501] pci 0000:00:01.0: [1039:0004] type 01 class 0x060400 [ 0.183584] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.183684] pci 0000:00:02.0: [1039:0968] type 00 class 0x060100 [ 0.183835] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180 [ 0.183886] pci 0000:00:02.5: reg 20: [io 0xfff0-0xffff] [ 0.183935] pci 0000:00:02.5: PME# supported from D3cold [ 0.184027] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310 [ 0.184043] pci 0000:00:03.0: reg 10: [mem 0xf9fff000-0xf9ffffff] [ 0.184141] pci 0000:00:03.0: System wakeup disabled by ACPI [ 0.184186] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310 [ 0.184202] pci 0000:00:03.1: reg 10: [mem 0xf9ffe000-0xf9ffefff] [ 0.184298] pci 0000:00:03.1: System wakeup disabled by ACPI [ 0.184348] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320 [ 0.184366] pci 0000:00:03.3: reg 10: [mem 0xf9ffd000-0xf9ffdfff] [ 0.184442] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.184488] pci 0000:00:03.3: System wakeup disabled by ACPI [ 0.184541] pci 0000:00:04.0: [1039:0191] type 00 class 0x020000 [ 0.184560] pci 0000:00:04.0: reg 10: [mem 0xf9ffcc00-0xf9ffcc7f] [ 0.184572] pci 0000:00:04.0: reg 14: [io 0xcc00-0xcc7f] [ 0.184640] pci 0000:00:04.0: supports D1 D2 [ 0.184643] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.184689] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.184739] pci 0000:00:05.0: [1039:1183] type 00 class 0x01018f [ 0.184758] pci 0000:00:05.0: reg 10: [io 0xc800-0xc807] [ 0.184769] pci 0000:00:05.0: reg 14: [io 0xc400-0xc403] [ 0.184780] pci 0000:00:05.0: reg 18: [io 0xc000-0xc007] [ 0.184791] pci 0000:00:05.0: reg 1c: [io 0xbc00-0xbc03] [ 0.184802] pci 0000:00:05.0: reg 20: [io 0xb800-0xb80f] [ 0.184813] pci 0000:00:05.0: reg 24: [io 0xb400-0xb47f] [ 0.184854] pci 0000:00:05.0: PME# supported from D3cold [ 0.184900] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.184955] pci 0000:00:06.0: [1039:000a] type 01 class 0x060400 [ 0.185049] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.185108] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.185163] pci 0000:00:07.0: [1039:000a] type 01 class 0x060400 [ 0.185252] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.185307] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.185363] pci 0000:00:0d.0: [1180:0832] type 00 class 0x0c0010 [ 0.185377] pci 0000:00:0d.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.185380] pci 0000:00:0d.0: MMC cards are now supported by standard SDHCI controller [ 0.185394] pci 0000:00:0d.0: reg 10: [mem 0xf9ffc000-0xf9ffc7ff] [ 0.185471] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 0.185560] pci 0000:00:0d.1: [1180:0822] type 00 class 0x080500 [ 0.185579] pci 0000:00:0d.1: reg 10: [mem 0xf9ffc800-0xf9ffc8ff] [ 0.185655] pci 0000:00:0d.1: supports D1 D2 [ 0.185658] pci 0000:00:0d.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.185745] pci 0000:00:0d.2: [1180:0592] type 00 class 0x088000 [ 0.185764] pci 0000:00:0d.2: reg 10: [mem 0xf9ff7800-0xf9ff78ff] [ 0.186007] pci 0000:00:0d.2: supports D1 D2 [ 0.186010] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186104] pci 0000:00:0d.3: [1180:0852] type 00 class 0x088000 [ 0.186123] pci 0000:00:0d.3: reg 10: [mem 0xf9ff7400-0xf9ff74ff] [ 0.186200] pci 0000:00:0d.3: supports D1 D2 [ 0.186203] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.186298] pci 0000:00:0f.0: [1039:7502] type 00 class 0x040300 [ 0.186317] pci 0000:00:0f.0: reg 10: [mem 0xf9ff0000-0xf9ff3fff] [ 0.186394] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold [ 0.186442] pci 0000:00:0f.0: System wakeup disabled by ACPI [ 0.186593] pci 0000:01:00.0: [10de:06e9] type 00 class 0x030000 [ 0.186612] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff] [ 0.186633] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.186653] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] [ 0.186667] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f] [ 0.186681] pci 0000:01:00.0: reg 30: [mem 0xfdee0000-0xfdefffff pref] [ 0.189020] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.189028] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.189033] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff] [ 0.189041] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.189142] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000 [ 0.189174] pci 0000:02:00.0: reg 10: [mem 0xfdff0000-0xfdffffff 64bit] [ 0.189332] pci 0000:02:00.0: supports D1 [ 0.189335] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.189414] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.189427] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.189437] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.189521] pci 0000:00:07.0: PCI bridge to [bus 03-06] [ 0.189529] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.189535] pci 0000:00:07.0: bridge window [mem 0xfe000000-0xfebfffff] [ 0.189543] pci 0000:00:07.0: bridge window [mem 0xf6000000-0xf8ffffff 64bit pref] [ 0.189676] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d) [ 0.189980] acpi PNP0A03:00: ACPI _OSC control (0x19) granted [ 0.190505] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.190592] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.190676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15) [ 0.190759] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 12 14 15) [ 0.190843] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.190926] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 *15) [ 0.191017] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14 15) [ 0.191101] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.191365] ACPI: Enabled 2 GPEs in block 00 to 0F [ 0.191372] ACPI: Enabled 1 GPEs in block 10 to 1F [ 0.191382] acpi root: \_SB_.PCI0 notify handler is installed [ 0.191434] Found 1 acpi root devices [ 0.191537] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.191650] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.191650] vgaarb: loaded [ 0.191650] vgaarb: bridge control possible 0000:01:00.0 [ 0.191650] SCSI subsystem initialized [ 0.191650] ACPI: bus type ATA registered [ 0.191650] libata version 3.00 loaded. [ 0.192039] PCI: Using ACPI for IRQ routing [ 0.201214] PCI: pci_cache_line_size set to 64 bytes [ 0.201274] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.201277] e820: reserve RAM buffer [mem 0xbffb8000-0xbfffffff] [ 0.201422] NetLabel: Initializing [ 0.201425] NetLabel: domain hash size = 128 [ 0.201426] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.201444] NetLabel: unlabeled traffic allowed by default [ 0.201498] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.201503] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.201508] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.203026] Switching to clocksource hpet [ 0.214692] pnp: PnP ACPI init [ 0.214733] ACPI: bus type PNP registered [ 0.214840] pnp 00:00: [dma 4] [ 0.214891] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.215037] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.215126] pnp 00:02: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.215167] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.215205] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.215483] system 00:05: [io 0x0290-0x0297] has been reserved [ 0.215488] system 00:05: [io 0x0c00-0x0c05] has been reserved [ 0.215492] system 00:05: [io 0x0d00-0x0d05] has been reserved [ 0.215496] system 00:05: [io 0x0480-0x048f] has been reserved [ 0.215499] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.215503] system 00:05: [io 0x0800-0x087f] has been reserved [ 0.215506] system 00:05: [io 0x0880-0x08ff] has been reserved [ 0.215511] system 00:05: [io 0x0c00-0x0c7f] could not be reserved [ 0.215515] system 00:05: [io 0x2000-0x20fe] has been reserved [ 0.215520] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved [ 0.215524] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.215527] system 00:05: [mem 0xffee0000-0xffefffff] has been reserved [ 0.215531] system 00:05: [mem 0xfed10000-0xfed3ffff] has been reserved [ 0.215536] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.215647] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.215717] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.215812] system 00:08: [io 0x0250-0x0253] has been reserved [ 0.215817] system 00:08: [io 0x0256-0x025f] has been reserved [ 0.215828] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.215832] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.215837] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.215938] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.215944] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.216256] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.216261] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.216265] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.216269] system 00:0a: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.216273] system 00:0a: [mem 0xe0000000-0xffffffff] could not be reserved [ 0.216277] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.216457] pnp: PnP ACPI: found 11 devices [ 0.216459] ACPI: bus type PNP unregistered [ 0.223953] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.223960] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.223967] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff] [ 0.223973] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.223981] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.223987] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.223998] pci 0000:00:07.0: PCI bridge to [bus 03-06] [ 0.224008] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.224015] pci 0000:00:07.0: bridge window [mem 0xfe000000-0xfebfffff] [ 0.224021] pci 0000:00:07.0: bridge window [mem 0xf6000000-0xf8ffffff 64bit pref] [ 0.224051] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.224054] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.224058] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.224061] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.224064] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.224068] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.224071] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.224074] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff] [ 0.224077] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.224081] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.224084] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.224088] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfebfffff] [ 0.224091] pci_bus 0000:03: resource 2 [mem 0xf6000000-0xf8ffffff 64bit pref] [ 0.224158] NET: Registered protocol family 2 [ 0.224473] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.225194] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.225824] TCP: Hash tables configured (established 32768 bind 32768) [ 0.225944] TCP: reno registered [ 0.225955] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.226044] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.226219] NET: Registered protocol family 1 [ 0.403321] pci 0000:01:00.0: Boot video device [ 0.403331] PCI: CLS 32 bytes, default 64 [ 0.403419] Trying to unpack rootfs image as initramfs... [ 4.978762] Freeing initrd memory: 24612k freed [ 5.007861] Simple Boot Flag at 0x71 set to 0x1 [ 5.008679] type=2000 audit(1402736226.007:1): initialized [ 5.040022] bounce pool size: 64 pages [ 5.040054] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.042372] VFS: Disk quotas dquot_6.5.2 [ 5.042441] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.043172] bio: create slab <bio-1> at 1 [ 5.043364] Btrfs loaded [ 5.043376] msgmni has been set to 6015 [ 5.043799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 5.043850] io scheduler noop registered [ 5.043853] io scheduler deadline registered [ 5.043892] io scheduler cfq registered [ 5.043937] io scheduler bfq registered (default) [ 5.043940] BFQ I/O-scheduler version: v7r2 [ 5.044203] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X [ 5.044408] intel_idle: does not run on family 6 model 23 [ 5.044475] GHES: HEST is not enabled! [ 5.044547] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.045126] Linux agpgart interface v0.103 [ 5.047106] brd: module loaded [ 5.047302] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 5.050998] i8042: Detected active multiplexing controller, rev 1.1 [ 5.052275] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.052316] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 5.052344] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 5.052375] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 5.052402] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 5.052526] mousedev: PS/2 mouse device common for all mice [ 5.052665] rtc_cmos 00:07: RTC can wake from S4 [ 5.052796] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 5.052820] rtc_cmos 00:07: alarms up to one year, 114 bytes nvram, hpet irqs [ 5.052834] cpuidle: using governor ladder [ 5.052837] cpuidle: using governor menu [ 5.052841] ledtrig-cpu: registered to indicate activity on CPUs [ 5.052999] TCP: cubic registered [ 5.053024] Key type dns_resolver registered [ 5.053292] PM: Hibernation image not present or could not be loaded. [ 5.053313] registered taskstats version 1 [ 5.053988] Magic number: 2:341:978 [ 5.054123] rtc_cmos 00:07: setting system clock to 2014-06-14 08:57:06 UTC (1402736226) [ 5.054127] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 5.055911] Freeing unused kernel memory: 1216k freed [ 5.056593] Write protecting the kernel read-only data: 12288k [ 5.063315] Freeing unused kernel memory: 1908k freed [ 5.068656] Freeing unused kernel memory: 1196k freed [ 5.092681] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 5.104014] dracut: dracut-EE 2012.1 Desktop dracut-027- [ 5.122737] dracut: rd.luks=0: removing cryptoluks activation [ 5.127122] loop: module loaded [ 5.128815] dracut: root was live:CDLABEL=ROSA.FRESH.KDE.R3.x86_64, is now live:/dev/disk/by-label/ROSA.FRESH.KDE.R3.x86_64 [ 5.145088] device-mapper: uevent: version 1.0.3 [ 5.145204] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: XXX@XXX [ 5.155592] RPC: Registered named UNIX socket transport module. [ 5.155598] RPC: Registered udp transport module. [ 5.155600] RPC: Registered tcp transport module. [ 5.155602] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.168824] NET: Registered protocol family 10 [ 5.204986] systemd-udevd[156]: starting version 208 [ 5.245513] [drm] Initialized drm 1.1.0 20060810 [ 5.249341] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 5.249351] ACPI: Power Button [PWRB] [ 5.249430] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 5.249437] ACPI: Sleep Button [SLPB] [ 5.249501] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 5.261116] ACPI: Lid Switch [LID] [ 5.261198] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 5.261203] ACPI: Power Button [PWRF] [ 5.261770] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 5.266484] acpi device:18: registered as cooling_device0 [ 5.266570] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input5 [ 5.267043] wmi: Mapper loaded [ 5.275040] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298480a2 [ 5.275048] nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98) [ 5.275051] nouveau [ DEVICE][0000:01:00.0] Family : NV50 [ 5.277624] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 5.369847] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 5.369851] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN [ 5.370029] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 5.370033] nouveau [ VBIOS][0000:01:00.0] version 62.98.3c.00.44 [ 5.390376] nouveau [ PFB][0000:01:00.0] RAM type: DDR2 [ 5.390379] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB [ 5.390383] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags [ 5.417458] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 5.417470] nouveau [ PTHERM][0000:01:00.0] fan management: disabled [ 5.417475] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 5.417670] [TTM] Zone kernel: Available graphics memory: 1542180 kiB [ 5.417672] [TTM] Initializing pool allocator [ 5.417679] [TTM] Initializing DMA pool allocator [ 5.421653] nouveau [ DRM] VRAM: 512 MiB [ 5.421659] nouveau [ DRM] GART: 512 MiB [ 5.421666] nouveau [ DRM] TMDS table version 2.0 [ 5.421669] nouveau [ DRM] DCB version 4.0 [ 5.421673] nouveau [ DRM] DCB outp 00: 01011323 00010034 [ 5.421677] nouveau [ DRM] DCB outp 01: 02000300 00000028 [ 5.421679] nouveau [ DRM] DCB outp 02: 02022312 00020030 [ 5.421682] nouveau [ DRM] DCB conn 00: 00000000 [ 5.421686] nouveau [ DRM] DCB conn 01: 00000140 [ 5.421689] nouveau [ DRM] DCB conn 02: 00002261 [ 5.421692] nouveau [ DRM] DCB conn 07: 00000513 [ 5.434938] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 5.434941] [drm] No driver support for vblank timestamp query. [ 5.434945] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 5.435099] nouveau [ DRM] 4 available performance level(s) [ 5.435105] nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 900mV fanspeed 100% [ 5.435110] nouveau [ DRM] 1: core 275MHz shader 550MHz memory 250MHz voltage 900mV fanspeed 100% [ 5.435114] nouveau [ DRM] 2: core 500MHz shader 1000MHz memory 400MHz voltage 1090mV fanspeed 100% [ 5.435119] nouveau [ DRM] 3: core 580MHz shader 1450MHz memory 400MHz voltage 1170mV fanspeed 100% [ 5.435124] nouveau [ DRM] c: core 275MHz shader 550MHz memory 249MHz voltage 900mV [ 5.452819] nouveau [ DRM] MM: using M2MF for buffer copies [ 5.497394] nouveau [ DRM] allocated 1440x900 fb: 0x50000, bo ffff88007feaec00 [ 5.497485] fbcon: nouveaufb (fb0) is primary device [ 6.008017] tsc: Refined TSC clocksource calibration: 1999.431 MHz [ 6.008021] Switching to clocksource tsc [ 6.060313] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0, board id: 3655, fw id: 30712 [ 6.095017] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 [ 6.831559] Console: switching to colour frame buffer device 180x56 [ 6.834492] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 6.834495] nouveau 0000:01:00.0: registered panic notifier [ 6.834501] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0 [ 6.837371] dracut: Starting plymouth daemon [ 7.690070] dracut: rd.dm=0: removing DM RAID activation [ 7.704315] dracut: rd.md=0: removing MD RAID activation [ 7.773490] pata_sis 0000:00:02.5: version 0.5.2 [ 7.776180] ACPI: bus type USB registered [ 7.776225] usbcore: registered new interface driver usbfs [ 7.776241] usbcore: registered new interface driver hub [ 7.776343] usbcore: registered new device driver usb [ 7.776895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.777062] scsi0 : pata_sis [ 7.777559] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.777562] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 7.777725] scsi1 : pata_sis [ 7.777779] ehci-pci: EHCI PCI platform driver [ 7.777902] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14 [ 7.777906] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15 [ 7.778159] ehci-pci 0000:00:03.3: EHCI Host Controller [ 7.778170] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 7.778245] ehci-pci 0000:00:03.3: irq 22, io mem 0xf9ffd000 [ 7.784092] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 7.784151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.784155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 7.784159] usb usb1: Product: EHCI Host Controller [ 7.784162] usb usb1: Manufacturer: Linux 3.10.34-nrj-desktop-3rosa ehci_hcd [ 7.784165] usb usb1: SerialNumber: ... [ 7.784318] hub 1-0:1.0: USB hub found [ 7.784325] hub 1-0:1.0: 8 ports detected [ 7.785479] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 7.785490] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 7.785525] ohci_hcd 0000:00:03.0: irq 20, io mem 0xf9fff000 [ 7.838062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.838070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 7.838074] usb usb2: Product: OHCI Host Controller [ 7.838077] usb usb2: Manufacturer: Linux 3.10.34-nrj-desktop-3rosa ohci_hcd [ 7.838080] usb usb2: SerialNumber: ... [ 7.838255] hub 2-0:1.0: USB hub found [ 7.838265] hub 2-0:1.0: 4 ports detected [ 7.838418] sata_sis 0000:00:05.0: version 1.0 [ 7.838600] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode [ 7.839034] scsi2 : sata_sis [ 7.839324] scsi3 : sata_sis [ 7.839524] ata3: PATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 17 [ 7.839527] ata4: PATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 17 [ 7.839583] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 7.839739] sis190 0000:00:04.0: setting latency timer to 64 [ 7.839761] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 7.839764] sis190: 0000:00:04.0: Error EEPROM read 0 [ 7.839767] sis190: 0000:00:04.0: Read MAC address from APC [ 7.865010] sis190: 0000:00:04.0: unknown PHY 0x1c:0xc910 transceiver at address 1 [ 7.929115] ata2: port disabled--ignoring [ 8.086014] usb 1-4: new high-speed USB device number 2 using ehci-pci [ 8.121008] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 8.133220] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at ffffc90010786c00 (IRQ: 19), XXX [ 8.133224] sis190 0000:00:04.0 eth0: RGMII mode. [ 8.133231] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation [ 8.202035] firewire_ohci 0000:00:0d.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 [ 8.202184] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 8.202197] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 8.202226] ohci_hcd 0000:00:03.1: irq 21, io mem 0xf9ffe000 [ 8.202652] usb 1-4: New USB device found, idVendor=058f, idProduct=6387 [ 8.202657] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8.202660] usb 1-4: Product: Mass Storage Device [ 8.202663] usb 1-4: Manufacturer: JetFlash [ 8.202666] usb 1-4: SerialNumber: ... [ 8.204555] usb-storage 1-4:1.0: USB Mass Storage device detected [ 8.204639] scsi4 : usb-storage 1-4:1.0 [ 8.204735] usbcore: registered new interface driver usb-storage [ 8.255043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.255048] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 8.255051] usb usb3: Product: OHCI Host Controller [ 8.255055] usb usb3: Manufacturer: Linux 3.10.34-nrj-desktop-3rosa ohci_hcd [ 8.255058] usb usb3: SerialNumber: ... [ 8.255200] hub 3-0:1.0: USB hub found [ 8.255209] hub 3-0:1.0: 4 ports detected [ 8.282450] ata3.00: ATA-8: ST9320320AS, 0303, max UDMA/133 [ 8.282457] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 8.288577] ata3.00: configured for UDMA/133 [ 8.288757] scsi 2:0:0:0: Direct-Access ATA ST9320320AS 0303 PQ: 0 ANSI: 5 [ 8.289026] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 8.289106] sd 2:0:0:0: [sda] Write Protect is off [ 8.289110] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.289144] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.305029] usb 1-5: new high-speed USB device number 3 using ehci-pci [ 8.428675] usb 1-5: New USB device found, idVendor=064e, idProduct=a111 [ 8.428680] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 8.428684] usb 1-5: Product: USB2.0 UVC 1.3M WebCam [ 8.428687] usb 1-5: Manufacturer: SuYin [ 8.428690] usb 1-5: SerialNumber: ... [ 8.440009] sda: sda1 sda2 < sda5 sda6 sda7 > [ 8.440538] sd 2:0:0:0: [sda] Attached SCSI disk [ 8.459231] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100 [ 8.481221] ata4.00: configured for UDMA/100 [ 8.485641] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AS00 PQ: 0 ANSI: 5 [ 8.488565] Uniform Multi-Platform E-IDE driver [ 8.498502] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 8.498510] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.498761] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 8.703124] firewire_core 0000:00:0d.0: created device fw0: GUID 0000000000000000, S400 [ 9.194019] usb 3-3: new full-speed USB device number 2 using ohci_hcd [ 9.207331] scsi 4:0:0:0: Direct-Access JetFlash Transcend 16GB 8.07 PQ: 0 ANSI: 2 [ 9.208697] sd 4:0:0:0: [sdb] 31375360 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 9.209316] sd 4:0:0:0: [sdb] Write Protect is off [ 9.209320] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9.209940] sd 4:0:0:0: [sdb] No Caching mode page found [ 9.209944] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 9.212816] sd 4:0:0:0: [sdb] No Caching mode page found [ 9.212820] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 9.232083] sdb: sdb1 [ 9.237694] sd 4:0:0:0: [sdb] No Caching mode page found [ 9.237698] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 9.237702] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 9.394079] usb 3-3: New USB device found, idVendor=0b05, idProduct=1751 [ 9.394087] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.394091] usb 3-3: Product: BT-253 [ 9.394094] usb 3-3: Manufacturer: Broadcom Corp [ 9.394097] usb 3-3: SerialNumber: ... [ 9.474717] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 9.546189] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 9.548698] ISO 9660 Extensions: RRIP_1991A [ 9.595804] bio: create slab <bio-2> at 2 [ 9.655950] attempt to access beyond end of device [ 9.655958] loop1: rw=16, want=2072, limit=32 [ 9.656079] device-mapper: table: 252:1: snapshot: Failed to read snapshot metadata [ 9.656084] device-mapper: ioctl: error adding target to table [ 9.658040] usb 3-4: new full-speed USB device number 3 using ohci_hcd [ 9.680717] kjournald starting. Commit interval 5 seconds [ 9.680818] EXT3-fs (dm-0): using internal journal [ 9.680823] EXT3-fs (dm-0): mounted filesystem with ordered data mode [ 9.711746] dracut: Mounted root filesystem /dev/mapper/live-rw [ 9.858090] usb 3-4: New USB device found, idVendor=04d9, idProduct=a073 [ 9.858098] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.858102] usb 3-4: Product: USB Gaming Mouse [ 9.858105] usb 3-4: Manufacturer: Ione [ 9.863224] hidraw: raw HID events driver (C) Jiri Kosina [ 9.888142] usbcore: registered new interface driver usbhid [ 9.888146] usbhid: USB HID core driver [ 9.889206] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-4/3-4:1.0/input/input7 [ 9.889285] hid-generic 0003:04D9:A073.0001: input,hidraw0: USB HID v1.10 Keyboard [Ione USB Gaming Mouse] on usb-0000:00:03.1-4/input0 [ 9.890083] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-4/3-4:1.1/input/input8 [ 9.890243] hid-generic 0003:04D9:A073.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Ione USB Gaming Mouse] on usb-0000:00:03.1-4/input1 [ 9.891472] hid-generic 0003:04D9:A073.0003: hiddev0,hidraw2: USB HID v1.10 Device [Ione USB Gaming Mouse] on usb-0000:00:03.1-4/input2 [ 9.989337] dracut: Switching root [ 9.990686] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 10.453488] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 10.635047] systemd[1]: Inserted module 'autofs4' [ 10.635361] systemd[1]: Set hostname to ... [ 10.642307] systemd[1]: Initializing machine ID from D-Bus machine ID. [ 10.642772] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output. [ 10.840571] RUN systemd EFI generator [ 10.841311] Stop write mount to EFI [ 11.241913] systemd[1]: Started Replay Read-Ahead Data. [ 11.241946] systemd[1]: Starting Collect Read-Ahead Data... [ 11.243124] systemd[1]: Starting RPC Port Mapper. [ 11.243210] systemd[1]: Reached target RPC Port Mapper. [ 11.243246] systemd[1]: Starting Login Prompts. [ 11.243303] systemd[1]: Reached target Login Prompts. [ 11.243331] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 11.243418] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.243443] systemd[1]: Starting Syslog Socket. [ 11.243559] systemd[1]: Listening on Syslog Socket. [ 11.243584] systemd[1]: Starting Remote File Systems. [ 11.243641] systemd[1]: Reached target Remote File Systems. [ 11.243678] systemd[1]: Starting Delayed Shutdown Socket. [ 11.243917] systemd[1]: Listening on Delayed Shutdown Socket. [ 11.243946] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 11.244090] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 11.244113] systemd[1]: Starting Root Slice. [ 11.244224] systemd[1]: Created slice Root Slice. [ 11.244239] systemd[1]: Starting User and Session Slice. [ 11.244441] systemd[1]: Created slice User and Session Slice. [ 11.244461] systemd[1]: Starting System Slice. [ 11.244549] systemd[1]: Created slice System Slice. [ 11.244571] systemd[1]: Starting Slices. [ 11.244683] systemd[1]: Reached target Slices. [ 11.244707] systemd[1]: Starting system-getty.slice. [ 11.244904] systemd[1]: Created slice system-getty.slice. [ 11.244964] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 11.245181] systemd[1]: Set up automount ... [ 11.245214] systemd[1]: Starting Journal Socket. [ 11.245346] systemd[1]: Listening on Journal Socket. [ 11.245396] systemd[1]: Mounting Debug File System... [ 11.246020] systemd[1]: Mounting Huge Pages File System... [ 11.246822] systemd[1]: Starting Set default kernel console loglevel... [ 11.257951] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 11.258897] systemd[1]: Mounting POSIX Message Queue File System... [ 11.259784] systemd[1]: Starting Journal Service... [ 11.260814] systemd[1]: Started Journal Service. [ 11.604086] systemd-journald[427]: Vacuuming done, freed 0 bytes [ 12.032858] systemd-udevd[477]: starting version 208 [ 12.062178] vboxguest: PCI device not found, probably running on physical hardware. [ 13.490311] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.502745] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.592425] ACPI: Requesting acpi_cpufreq [ 13.596290] Monitor-Mwait will be used to enter C-1 state [ 13.596304] Monitor-Mwait will be used to enter C-2 state [ 13.596311] Monitor-Mwait will be used to enter C-3 state [ 13.596317] tsc: Marking TSC unstable due to TSC halts in idle [ 13.596366] ACPI: acpi_idle registered with cpuidle [ 13.601861] Switching to clocksource hpet [ 13.725261] ACPI: AC Adapter [AC0] (off-line) [ 13.726387] asus_laptop: Asus Laptop Support version 0.42 [ 13.726722] asus_laptop: X71SL model detected [ 13.733488] asus_laptop: Backlight controlled by ACPI video driver [ 13.733555] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input9 [ 13.796030] ACPI: Battery Slot [BAT0] (battery present) [ 14.082078] thermal LNXTHERM:00: registered as thermal_zone0 [ 14.082085] ACPI: Thermal Zone [THRM] (39 C) [ 14.801777] Bluetooth: Core ver 2.16 [ 14.801810] NET: Registered protocol family 31 [ 14.801812] Bluetooth: HCI device and connection manager initialized [ 14.801832] Bluetooth: HCI socket layer initialized [ 14.801835] Bluetooth: L2CAP socket layer initialized [ 14.801842] Bluetooth: SCO socket layer initialized [ 14.876760] media: Linux media interface: v0.10 [ 14.885691] usbcore: registered new interface driver btusb [ 14.935517] Linux video capture interface: v2.00 [ 15.220343] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:a111) [ 15.224454] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input10 [ 15.224561] usbcore: registered new interface driver uvcvideo [ 15.224563] USB Video Class driver (1.1.1) [ 15.344117] r592: driver successfully loaded [ 15.465053] r852: driver loaded successfully [ 15.548341] sdhci: Secure Digital Host Controller Interface driver [ 15.548351] sdhci: Copyright(c) Pierre Ossman [ 15.572602] sdhci-pci 0000:00:0d.1: SDHCI controller found [1180:0822] (rev 22) [ 15.574037] sdhci-pci 0000:00:0d.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 15.594991] sdhci-pci 0000:00:0d.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 15.597884] mmc0: SDHCI controller on PCI [0000:00:0d.1] using DMA [ 15.614291] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 15.626065] cfg80211: Calling CRDA to update world regulatory domain [ 15.788330] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 15.789003] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 [ 15.795513] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 15.795597] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 15.796303] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 [ 15.831118] microcode: Microcode Update Driver: v2.00 <XXX@XXX>, Peter Oruba [ 15.852745] snd_hda_intel 0000:00:0f.0: setting latency timer to 64 [ 15.913825] hda_codec: ALC663: SKU not ready 0x598301f0 [ 15.914177] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.914180] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.914182] hp_outs=2 (0x21/0x15/0x0/0x0/0x0) [ 15.914184] mono: mono_out=0x0 [ 15.914186] dig-out=0x11/0x1e [ 15.914187] inputs: [ 15.914190] Internal Mic=0x19 [ 15.914192] Mic=0x18 [ 15.914194] realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d [ 15.914195] realtek: Enable default setup for auto mode as fallback [ 15.923266] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input11 [ 15.948411] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line [ 15.948418] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.948420] hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.948422] mono: mono_out=0x0 [ 15.948423] inputs: [ 15.965554] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input12 [ 15.965699] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input13 [ 15.965766] input: HDA SIS966 Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input14 [ 17.580416] vboxguest: PCI device not found, probably running on physical hardware. [ 17.893479] ath: EEPROM regdomain: 0x60 [ 17.893486] ath: EEPROM indicates we should expect a direct regpair map [ 17.893494] ath: Country alpha2 being used: 00 [ 17.893495] ath: Regpair used: 0x60 [ 17.948780] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 17.949696] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90010880000, irq=16 [ 18.008367] cfg80211: World regulatory domain updated: [ 18.008376] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.008379] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.008381] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.008384] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.008386] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.008388] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.258627] systemd-journald[427]: Received request to flush runtime journal from PID 1 [ 22.152175] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.152181] Bluetooth: BNEP filters: protocol multicast [ 22.152200] Bluetooth: BNEP socket layer initialized [ 22.306694] Bluetooth: RFCOMM TTY layer initialized [ 22.306729] Bluetooth: RFCOMM socket layer initialized [ 22.306731] Bluetooth: RFCOMM ver 1.11 [ 23.247758] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.282902] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.462712] NET: Registered protocol family 17 [ 33.260034] sis190 0000:00:04.0 eth0: auto-negotiating... [ 55.195298] tun: Universal TUN/TAP device driver, 1.6 [ 55.195307] tun: (C) 5991-BBB7 Max Krasnyansky <XXX@XXX> [ 55.597523] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 86.105582] systemd-readahead[421]: open(/etc/resolv.conf) failed: Too many levels of symbolic links [ 943.323103] wlan0: authenticate with XXX [ 943.346989] wlan0: send auth to XXX (try 1/3) [ 943.349426] wlan0: authenticated [ 943.351034] wlan0: associate with XXX (try 1/3) [ 943.354921] wlan0: RX AssocResp from XXX (capab=0x411 status=0 aid=2) [ 943.354975] wlan0: associated [ 943.355082] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 962.614263] fuse init (API version 7.22) [ 971.312048] usb 1-1: new high-speed USB device number 6 using ehci-pci [ 971.431200] usb 1-1: New USB device found, idVendor=1234, idProduct=0123 [ 971.431205] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 971.431209] usb 1-1: Product: Flash Disk [ 971.431212] usb 1-1: Manufacturer: USB2.0 [ 971.431215] usb 1-1: SerialNumber: ... [ 971.431497] usb-storage 1-1:1.0: USB Mass Storage device detected [ 971.431605] scsi5 : usb-storage 1-1:1.0 [ 972.461050] scsi 5:0:0:0: Direct-Access USB2.0 Flash Disk PMAP PQ: 0 ANSI: 4 [ 973.023672] sd 5:0:0:0: [sdc] 7834944 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 973.024397] sd 5:0:0:0: [sdc] Write Protect is off [ 973.024402] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 973.025015] sd 5:0:0:0: [sdc] No Caching mode page found [ 973.025021] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 973.029764] sd 5:0:0:0: [sdc] No Caching mode page found [ 973.029770] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 973.051819] sdc: sdc1 [ 973.446921] sd 5:0:0:0: [sdc] No Caching mode page found [ 973.446928] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 973.446934] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 996.331683] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 1740.874883] wlan0: deauthenticating from XXX by local choice (reason=3) [ 1740.888741] cfg80211: Calling CRDA to update world regulatory domain [ 1741.075369] cfg80211: World regulatory domain updated: [ 1741.075376] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1741.075379] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1741.075382] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1741.075384] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1741.075387] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1741.075389] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1741.356948] PM: Syncing filesystems ... done. [ 1741.367217] PM: Preparing system for mem sleep [ 1741.771127] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 1741.782160] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 1741.793078] PM: Entering mem sleep [ 1741.793123] Suspending console(s) (use no_console_suspend to debug) [ 1741.793989] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 1741.794252] sd 2:0:0:0: [sda] Stopping disk [ 1741.840265] nouveau [ DRM] suspending fbcon... [ 1741.840290] nouveau [ DRM] suspending display... [ 1741.840298] nouveau [ DRM] unpinning framebuffer(s)... [ 1741.840342] nouveau [ DRM] evicting buffers... [ 1742.485094] nouveau [ DRM] waiting for kernel channels to go idle... [ 1742.485104] nouveau [ DRM] suspending client object trees... [ 1742.485715] nouveau [ DRM] suspending kernel object tree... [ 1745.914186] PM: suspend of devices complete after 4120.512 msecs [ 1745.914895] PM: late suspend of devices complete after 0.703 msecs [ 1745.948160] ehci-pci 0000:00:03.3: System wakeup enabled by ACPI [ 1745.959051] ohci_hcd 0000:00:03.1: System wakeup enabled by ACPI [ 1745.959077] ohci_hcd 0000:00:03.0: System wakeup enabled by ACPI [ 1745.959176] PM: noirq suspend of devices complete after 44.277 msecs [ 1745.961499] ACPI: Preparing to enter system sleep state S3 [ 1745.971420] PM: Saving platform NVS memory [ 1745.971802] Disabling non-boot CPUs ... [ 1745.973172] smpboot: CPU 1 is now offline [ 1745.973505] ACPI: Low-level resume complete [ 1745.973505] PM: Restoring platform NVS memory [ 1745.973505] CPU0: Thermal monitoring handled by SMI [ 1745.973505] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60f [ 1745.973505] Enabling non-boot CPUs ... [ 1745.973505] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1745.973079] CPU1 microcode updated early to revision 0x60f, date = 2010-09-29 [ 1745.973079] CPU1: Thermal monitoring handled by SMI [ 1745.991847] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60f [ 1745.991865] CPU1 is up [ 1745.994116] ACPI: Waking up from system sleep state S3 [ 1746.780122] ohci_hcd 0000:00:03.0: System wakeup disabled by ACPI [ 1746.780148] ohci_hcd 0000:00:03.1: System wakeup disabled by ACPI [ 1746.791099] ehci-pci 0000:00:03.3: System wakeup disabled by ACPI [ 1746.813097] firewire_ohci 0000:00:0d.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 1746.813098] firewire_ohci 0000:00:0d.0: MMC cards are now supported by standard SDHCI controller [ 1746.879375] PM: noirq resume of devices complete after 109.637 msecs [ 1746.879546] PM: early resume of devices complete after 0.142 msecs [ 1746.879861] sis190 0000:00:04.0: setting latency timer to 64 [ 1746.880053] sdhci-pci 0000:00:0d.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1746.881072] sdhci-pci 0000:00:0d.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1746.881187] snd_hda_intel 0000:00:0f.0: setting latency timer to 64 [ 1746.881190] nouveau [ DRM] re-enabling device... [ 1746.881203] nouveau [ DRM] resuming kernel object tree... [ 1746.881214] nouveau [ VBIOS][0000:01:00.0] running init tables [ 1746.881386] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0FFFFFFFF) is beyond end of object (length 0x7) (20130328/exoparg2-421) [ 1746.881395] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDEC.IDE0._STM] (Node ffff8800bbe2fc30), AE_AML_PACKAGE_LIMIT (20130328/psparse-537) [ 1746.881409] ata1: ACPI set timing mode failed (status=0x300b) [ 1746.881432] ata1: port disabled--ignoring [ 1746.881674] ata2: port disabled--ignoring [ 1747.015593] nouveau [ DRM] resuming client object trees... [ 1747.016077] nouveau [ DRM] resuming display... [ 1747.336302] ata4.00: ACPI cmd ef/XXX (SET FEATURES) filtered out [ 1747.336305] ata4.00: ACPI cmd ef/XXX (SET FEATURES) filtered out [ 1747.336307] ata4.00: ACPI cmd f5/XXX (SECURITY FREEZE LOCK) filtered out [ 1747.377283] ata4.00: configured for UDMA/100 [ 1747.435088] firewire_core 0000:00:0d.0: rediscovered device fw0 [ 1748.599284] ata3.00: ACPI cmd ef/XXX (SET FEATURES) filtered out [ 1748.599287] ata3.00: ACPI cmd ef/XXX (SET FEATURES) filtered out [ 1748.599290] ata3.00: ACPI cmd f5/XXX (SECURITY FREEZE LOCK) filtered out [ 1748.605685] ata3.00: configured for UDMA/133 [ 1748.605734] sd 2:0:0:0: [sda] Starting disk [ 1748.670789] PM: resume of devices complete after 1791.239 msecs [ 1748.671201] PM: Finishing wakeup. [ 1748.671203] Restarting tasks ... done. [ 1748.678060] video LNXVIDEO:00: Restoring backlight state [ 1748.753493] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1748.841486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1849.995943] usb 1-2: new high-speed USB device number 7 using ehci-pci [ 1850.111560] usb 1-2: New USB device found, idVendor=05e3, idProduct=0702 [ 1850.111567] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1850.111570] usb 1-2: Product: USB TO IDE [ 1850.112159] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1850.112213] usb-storage 1-2:1.0: Quirks match for vid 05e3 pid 0702: 520 [ 1850.112236] scsi6 : usb-storage 1-2:1.0 [ 1871.964082] scsi 6:0:0:0: Device offlined - not ready after error recovery [ 1871.964084] usb 1-2: USB disconnect, device number 7 [ 1901.265538] wlan0: authenticate with XXX [ 1901.283999] wlan0: send auth to XXX (try 1/3) [ 1901.285925] wlan0: authenticated [ 1901.290147] wlan0: associate with XXX (try 1/3) [ 1901.294052] wlan0: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [ 1901.294117] wlan0: associated [ 1901.294166] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1928.499606] usb 3-4: USB disconnect, device number 3 [ 1981.193071] usb 1-2: new high-speed USB device number 8 using ehci-pci [ 1981.308443] usb 1-2: New USB device found, idVendor=05e3, idProduct=0702 [ 1981.308452] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1981.308456] usb 1-2: Product: USB TO IDE [ 1981.310903] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1981.313395] usb-storage 1-2:1.0: Quirks match for vid 05e3 pid 0702: 520 [ 1981.313436] scsi7 : usb-storage 1-2:1.0 [ 1982.319017] scsi 7:0:0:0: Direct-Access TOSHIBA MK1234GAX 0811 PQ: 0 ANSI: 0 [ 1982.320622] sd 7:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1982.323759] sd 7:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 1982.325752] sd 7:0:0:0: [sdd] Cache data unavailable [ 1982.325758] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 1982.328371] sd 7:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 1982.330037] sd 7:0:0:0: [sdd] Cache data unavailable [ 1982.330042] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 1982.348271] sdd: sdd1 sdd2 < sdd5 > [ 1982.351498] sd 7:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 1982.353126] sd 7:0:0:0: [sdd] Cache data unavailable [ 1982.353131] sd 7:0:0:0: [sdd] Assuming drive cache: write through [ 1982.353136] sd 7:0:0:0: [sdd] Attached SCSI disk [ 2089.796761] lp: driver loaded but no devices found [ 2089.909317] lp: driver loaded but no devices found [ 2089.923855] ide-cd driver 5.00 [ 2089.957475] ide-gd driver 1.18 [ 2090.013329] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 2090.162691] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2090.162746] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2090.162793] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 2090.162842] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 2090.162888] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 2090.194536] ppdev: user-space parallel port driver [ 2187.890850] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 2324.005630] usb 1-2: USB disconnect, device number 8 [ 2324.081204] FAT-fs (sdd1): unable to read boot sector to mark fs as dirty [ 2338.695051] usb 1-8: new high-speed USB device number 9 using ehci-pci [ 2338.812933] usb 1-8: New USB device found, idVendor=0bc2, idProduct=a013 [ 2338.812938] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2338.812942] usb 1-8: Product: Backup+ BL [ 2338.812945] usb 1-8: Manufacturer: Seagate [ 2338.812948] usb 1-8: SerialNumber: ... [ 2338.813609] usb-storage 1-8:1.0: USB Mass Storage device detected [ 2338.813687] scsi8 : usb-storage 1-8:1.0 [ 2339.816858] scsi 8:0:0:0: Direct-Access Seagate Backup+ BL 0409 PQ: 0 ANSI: 6 [ 2339.817450] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 2339.818497] sd 8:0:0:0: [sdd] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB) [ 2339.819605] sd 8:0:0:0: [sdd] Write Protect is off [ 2339.819611] sd 8:0:0:0: [sdd] Mode Sense: 4f 00 00 00 [ 2339.820980] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2339.852512] sdd: sdd1 [ 2339.856352] sd 8:0:0:0: [sdd] Attached SCSI disk [ 2452.232068] usb 1-2: new high-speed USB device number 10 using ehci-pci [ 2452.347506] usb 1-2: New USB device found, idVendor=125f, idProduct=a91a [ 2452.347512] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 2452.347516] usb 1-2: Product: Portable HDD NH92 [ 2452.347519] usb 1-2: Manufacturer: ADATA [ 2452.347522] usb 1-2: SerialNumber: ... [ 2452.347784] usb-storage 1-2:1.0: USB Mass Storage device detected [ 2452.349041] scsi9 : usb-storage 1-2:1.0 [ 2453.352833] scsi 9:0:0:0: Direct-Access ADATA HDD NH92 PQ: 0 ANSI: 0 [ 2453.353444] sd 9:0:0:0: Attached scsi generic sg5 type 0 [ 2453.353791] sd 9:0:0:0: [sde] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 2453.354403] sd 9:0:0:0: [sde] Write Protect is off [ 2453.354408] sd 9:0:0:0: [sde] Mode Sense: 03 00 00 00 [ 2453.355149] sd 9:0:0:0: [sde] No Caching mode page found [ 2453.355154] sd 9:0:0:0: [sde] Assuming drive cache: write through [ 2453.357283] sd 9:0:0:0: [sde] No Caching mode page found [ 2453.357289] sd 9:0:0:0: [sde] Assuming drive cache: write through [ 2453.382975] sde: sde1 [ 2453.386077] sd 9:0:0:0: [sde] No Caching mode page found [ 2453.386083] sd 9:0:0:0: [sde] Assuming drive cache: write through [ 2453.386089] sd 9:0:0:0: [sde] Attached SCSI disk [ 2511.266938] lp: driver loaded but no devices found [ 2511.375979] lp: driver loaded but no devices found [ 2654.989123] usb 1-8: USB disconnect, device number 9 [ 2655.136576] sd 8:0:0:0: [sdd] Synchronizing SCSI cache [ 2655.136672] sd 8:0:0:0: [sdd] [ 2655.136676] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2655.946671] usb 1-2: USB disconnect, device number 10 [ 2694.642052] usb 1-8: new high-speed USB device number 11 using ehci-pci [ 2694.756994] usb 1-8: New USB device found, idVendor=0b05, idProduct=1797 [ 2694.756999] usb 1-8: New USB device strings: Mfr=10, Product=11, SerialNumber=... [ 2694.757019] usb 1-8: Product: ASUS Optical Drive [ 2694.757022] usb 1-8: Manufacturer: ASUS [ 2694.757027] usb 1-8: SerialNumber: ... [ 2694.757892] usb-storage 1-8:1.0: USB Mass Storage device detected [ 2694.757970] scsi10 : usb-storage 1-8:1.0 [ 2695.785443] scsi 10:0:0:0: CD-ROM HL-DT-ST DVDRAM GU60N AS00 PQ: 0 ANSI: 0 [ 2695.804551] sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2695.804755] sr 10:0:0:0: Attached scsi CD-ROM sr1 [ 2695.804890] sr 10:0:0:0: Attached scsi generic sg4 type 5 [ 2708.456036] usb 3-1: new full-speed USB device number 4 using ohci_hcd [ 2708.657300] usb 3-1: New USB device found, idVendor=04d9, idProduct=a073 [ 2708.657305] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2708.657309] usb 3-1: Product: USB Gaming Mouse [ 2708.657312] usb 3-1: Manufacturer: Ione [ 2708.668673] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input15 [ 2708.668805] hid-generic 0003:04D9:A073.0004: input,hidraw0: USB HID v1.10 Keyboard [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input0 [ 2708.680139] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/input/input16 [ 2708.680388] hid-generic 0003:04D9:A073.0005: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input1 [ 2708.689468] hid-generic 0003:04D9:A073.0006: hiddev0,hidraw2: USB HID v1.10 Device [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input2 [ 2734.657473] lp: driver loaded but no devices found [ 2734.764295] lp: driver loaded but no devices found [ 2867.416041] usb 1-8: USB disconnect, device number 11 [ 2869.404238] usb 3-1: USB disconnect, device number 4 [ 2889.983072] usb 1-8: new high-speed USB device number 13 using ehci-pci [ 2890.098108] usb 1-8: New USB device found, idVendor=0b05, idProduct=1797 [ 2890.098113] usb 1-8: New USB device strings: Mfr=10, Product=11, SerialNumber=... [ 2890.098117] usb 1-8: Product: ASUS Optical Drive [ 2890.098120] usb 1-8: Manufacturer: ASUS [ 2890.098123] usb 1-8: SerialNumber: ... [ 2890.098742] usb-storage 1-8:1.0: USB Mass Storage device detected [ 2890.099806] scsi11 : usb-storage 1-8:1.0 [ 2891.125276] scsi 11:0:0:0: CD-ROM HL-DT-ST DVDRAM GU60N AS00 PQ: 0 ANSI: 0 [ 2891.144408] sr1: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2891.144599] sr 11:0:0:0: Attached scsi CD-ROM sr1 [ 2891.144723] sr 11:0:0:0: Attached scsi generic sg4 type 5 [ 2998.156855] lp: driver loaded but no devices found [ 2998.248234] lp: driver loaded but no devices found [ 3705.893469] ISO 9660 Extensions: RRIP_1991A [ 3785.852358] lp: driver loaded but no devices found [ 3785.946250] lp: driver loaded but no devices found [ 3823.890518] lp: driver loaded but no devices found [ 3824.010627] lp: driver loaded but no devices found [ 4216.140828] usb 1-8: USB disconnect, device number 13 [ 4216.142071] cdrom: issuing MRW background format suspend [ 4251.293045] usb 1-8: new high-speed USB device number 14 using ehci-pci [ 4251.408557] usb 1-8: New USB device found, idVendor=05e3, idProduct=0702 [ 4251.408565] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 4251.408569] usb 1-8: Product: USB TO IDE [ 4251.409432] usb-storage 1-8:1.0: USB Mass Storage device detected [ 4251.409510] usb-storage 1-8:1.0: Quirks match for vid 05e3 pid 0702: 520 [ 4251.409538] scsi12 : usb-storage 1-8:1.0 [ 4252.422618] scsi 12:0:0:0: Direct-Access HDS72808 0PLAT20 0811 PQ: 0 ANSI: 0 [ 4252.423136] sd 12:0:0:0: Attached scsi generic sg4 type 0 [ 4252.426047] sd 12:0:0:0: [sdd] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB) [ 4252.427357] sd 12:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 4252.428592] sd 12:0:0:0: [sdd] Cache data unavailable [ 4252.428596] sd 12:0:0:0: [sdd] Assuming drive cache: write through [ 4252.431099] sd 12:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 4252.432379] sd 12:0:0:0: [sdd] Cache data unavailable [ 4252.432383] sd 12:0:0:0: [sdd] Assuming drive cache: write through [ 4252.458017] sdd: sdd1 sdd2 < sdd5 > [ 4252.461105] sd 12:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 4252.462372] sd 12:0:0:0: [sdd] Cache data unavailable [ 4252.462376] sd 12:0:0:0: [sdd] Assuming drive cache: write through [ 4252.462381] sd 12:0:0:0: [sdd] Attached SCSI disk [ 4255.925057] usb 3-1: new full-speed USB device number 5 using ohci_hcd [ 4256.125544] usb 3-1: New USB device found, idVendor=04d9, idProduct=a073 [ 4256.125552] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4256.125556] usb 3-1: Product: USB Gaming Mouse [ 4256.125560] usb 3-1: Manufacturer: Ione [ 4256.136938] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input17 [ 4256.137163] hid-generic 0003:04D9:A073.0007: input,hidraw0: USB HID v1.10 Keyboard [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input0 [ 4256.148463] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/input/input18 [ 4256.148731] hid-generic 0003:04D9:A073.0008: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input1 [ 4256.157822] hid-generic 0003:04D9:A073.0009: hiddev0,hidraw2: USB HID v1.10 Device [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input2 [ 4312.375668] lp: driver loaded but no devices found [ 4312.459364] lp: driver loaded but no devices found [ 4556.669877] usb 1-8: USB disconnect, device number 14 [ 4556.710500] Buffer I/O error on device sdd1, logical block 92 [ 4556.710516] Buffer I/O error on device sdd1, logical block 92 [ 4556.711731] Buffer I/O error on device sdd1, logical block 250682 [ 4556.711738] Buffer I/O error on device sdd1, logical block 250683 [ 4556.711742] Buffer I/O error on device sdd1, logical block 250682 [ 4566.430037] usb 1-8: new high-speed USB device number 16 using ehci-pci [ 4566.545534] usb 1-8: New USB device found, idVendor=05e3, idProduct=0702 [ 4566.545539] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 4566.545542] usb 1-8: Product: USB TO IDE [ 4566.546228] usb-storage 1-8:1.0: USB Mass Storage device detected [ 4566.546284] usb-storage 1-8:1.0: Quirks match for vid 05e3 pid 0702: 520 [ 4566.546311] scsi13 : usb-storage 1-8:1.0 [ 4567.548844] scsi 13:0:0:0: Direct-Access HDS72808 0PLAT20 0811 PQ: 0 ANSI: 0 [ 4567.549663] sd 13:0:0:0: Attached scsi generic sg4 type 0 [ 4567.550711] sd 13:0:0:0: [sdd] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB) [ 4567.552087] sd 13:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 4567.553456] sd 13:0:0:0: [sdd] Cache data unavailable [ 4567.553461] sd 13:0:0:0: [sdd] Assuming drive cache: write through [ 4567.555959] sd 13:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 4567.557334] sd 13:0:0:0: [sdd] Cache data unavailable [ 4567.557340] sd 13:0:0:0: [sdd] Assuming drive cache: write through [ 4567.578365] sdd: sdd1 sdd2 < sdd5 > [ 4567.581469] sd 13:0:0:0: [sdd] Test WP failed, assume Write Enabled [ 4567.582710] sd 13:0:0:0: [sdd] Cache data unavailable [ 4567.582715] sd 13:0:0:0: [sdd] Assuming drive cache: write through [ 4567.582720] sd 13:0:0:0: [sdd] Attached SCSI disk [ 4603.758161] usb 1-8: USB disconnect, device number 16 [ 4641.253038] usb 1-8: new high-speed USB device number 17 using ehci-pci [ 4641.420715] usb 1-8: New USB device found, idVendor=174c, idProduct=5106 [ 4641.420720] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 4641.420724] usb 1-8: Product: USB Mass Storage Device [ 4641.420727] usb 1-8: Manufacturer: ASMedia [ 4641.420730] usb 1-8: SerialNumber: ... [ 4641.421029] usb-storage 1-8:1.0: USB Mass Storage device detected [ 4641.422386] scsi14 : usb-storage 1-8:1.0 [ 4645.324147] scsi 14:0:0:0: Direct-Access ST332041 8AS CC37 PQ: 0 ANSI: 5 [ 4645.324976] sd 14:0:0:0: [sdd] 625140335 512-byte logical blocks: (320 GB/298 GiB) [ 4645.325560] sd 14:0:0:0: Attached scsi generic sg4 type 0 [ 4645.326602] sd 14:0:0:0: [sdd] Write Protect is off [ 4645.326607] sd 14:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 4645.327597] sd 14:0:0:0: [sdd] No Caching mode page found [ 4645.327601] sd 14:0:0:0: [sdd] Assuming drive cache: write through [ 4645.330344] sd 14:0:0:0: [sdd] No Caching mode page found [ 4645.330348] sd 14:0:0:0: [sdd] Assuming drive cache: write through [ 4645.359877] sdd: sdd1 sdd2 [ 4645.363731] sd 14:0:0:0: [sdd] No Caching mode page found [ 4645.363738] sd 14:0:0:0: [sdd] Assuming drive cache: write through [ 4645.363743] sd 14:0:0:0: [sdd] Attached SCSI disk [ 4688.559555] lp: driver loaded but no devices found [ 4688.655566] lp: driver loaded but no devices found [ 4862.375937] usb 1-8: USB disconnect, device number 17 [ 5458.732038] usb 1-8: new high-speed USB device number 18 using ehci-pci [ 5463.835035] usb 1-8: device descriptor read/64, error -32 [ 5464.376042] usb 3-4: new full-speed USB device number 6 using ohci_hcd [ 5464.556805] usb 3-4: not running at top speed; connect to a high speed hub [ 5464.580816] usb 3-4: New USB device found, idVendor=1949, idProduct=0004 [ 5464.580823] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5464.580827] usb 3-4: Product: Amazon Kindle [ 5464.580830] usb 3-4: Manufacturer: Amazon [ 5464.580834] usb 3-4: SerialNumber: ... [ 5464.595850] usb-storage 3-4:1.0: USB Mass Storage device detected [ 5464.596524] scsi15 : usb-storage 3-4:1.0 [ 5465.604853] scsi 15:0:0:0: Direct-Access Kindle Internal Storage 0100 PQ: 0 ANSI: 2 [ 5465.605533] sd 15:0:0:0: Attached scsi generic sg4 type 0 [ 5465.617856] sd 15:0:0:0: [sdd] 2846720 512-byte logical blocks: (1.45 GB/1.35 GiB) [ 5465.726866] sd 15:0:0:0: [sdd] Write Protect is off [ 5465.726876] sd 15:0:0:0: [sdd] Mode Sense: 0f 00 00 00 [ 5465.836842] sd 15:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5466.074860] sdd: sdd1 [ 5466.316864] sd 15:0:0:0: [sdd] Attached SCSI removable disk [ 5484.262767] usb 3-1: USB disconnect, device number 5 [ 5548.289038] usb 3-1: new full-speed USB device number 7 using ohci_hcd [ 5548.489509] usb 3-1: New USB device found, idVendor=04d9, idProduct=a073 [ 5548.489513] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5548.489517] usb 3-1: Product: USB Gaming Mouse [ 5548.489520] usb 3-1: Manufacturer: Ione [ 5548.500849] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input19 [ 5548.500954] hid-generic 0003:04D9:A073.000A: input,hidraw0: USB HID v1.10 Keyboard [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input0 [ 5548.512400] input: Ione USB Gaming Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/input/input20 [ 5548.512621] hid-generic 0003:04D9:A073.000B: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input1 [ 5548.521670] hid-generic 0003:04D9:A073.000C: hiddev0,hidraw2: USB HID v1.10 Device [Ione USB Gaming Mouse] on usb-0000:00:03.1-1/input2 [ 5606.157804] lp: driver loaded but no devices found [ 5606.260878] lp: driver loaded but no devices found [ 5671.990552] sdd: detected capacity change from 1457520640 to 0 [ 5677.498210] usb 3-4: USB disconnect, device number 6 [ 5677.501183] sd 15:0:0:0: [sdd] Synchronizing SCSI cache [ 5677.501248] sd 15:0:0:0: [sdd] [ 5677.501252] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 5686.515037] usb 1-8: new high-speed USB device number 20 using ehci-pci [ 5686.631288] usb 1-8: New USB device found, idVendor=04e8, idProduct=689e [ 5686.631293] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5686.631296] usb 1-8: Product: Samsung Android USB Device [ 5686.631300] usb 1-8: Manufacturer: SAMSUNG Electronics Co., Ltd. [ 5686.631303] usb 1-8: SerialNumber: ... [ 5686.633822] usb-storage 1-8:1.3: USB Mass Storage device detected [ 5686.633913] scsi16 : usb-storage 1-8:1.3 [ 5686.748689] cdc_acm 1-8:1.0: This device cannot do calls on its own. It is not a modem. [ 5686.750219] cdc_acm 1-8:1.0: ttyACM0: USB ACM device [ 5686.751963] usbcore: registered new interface driver cdc_acm [ 5686.751968] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 5687.636851] scsi 16:0:0:0: Direct-Access SAMSUNG GT-S5830 Card 0100 PQ: 0 ANSI: 2 [ 5687.637375] sd 16:0:0:0: Attached scsi generic sg4 type 0 [ 5687.645226] sd 16:0:0:0: [sdd] Attached SCSI removable disk [ 5728.669319] usb 1-8: USB disconnect, device number 20 [ 5732.436038] usb 1-8: new high-speed USB device number 21 using ehci-pci [ 5732.552906] usb 1-8: New USB device found, idVendor=04e8, idProduct=689e [ 5732.552911] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5732.552915] usb 1-8: Product: Samsung Android USB Device [ 5732.552918] usb 1-8: Manufacturer: SAMSUNG Electronics Co., Ltd. [ 5732.552922] usb 1-8: SerialNumber: ... [ 5732.554313] cdc_acm 1-8:1.0: This device cannot do calls on its own. It is not a modem. [ 5732.554443] cdc_acm 1-8:1.0: ttyACM0: USB ACM device [ 5732.556423] usb-storage 1-8:1.3: USB Mass Storage device detected [ 5732.556743] scsi17 : usb-storage 1-8:1.3 [ 5733.559101] scsi 17:0:0:0: Direct-Access SAMSUNG GT-S5830 Card 0100 PQ: 0 ANSI: 2 [ 5733.559379] sd 17:0:0:0: Attached scsi generic sg4 type 0 [ 5733.562327] sd 17:0:0:0: [sdd] Attached SCSI removable disk [ 5746.893892] lp: driver loaded but no devices found [ 5746.997563] lp: driver loaded but no devices found [ 5786.538827] usb 1-8: USB disconnect, device number 21 [ 5790.944042] usb 1-8: new high-speed USB device number 22 using ehci-pci [ 5791.058929] usb 1-8: New USB device found, idVendor=0fca, idProduct=8004 [ 5791.058934] usb 1-8: New USB device strings: Mfr=1, Product=5, SerialNumber=... [ 5791.058938] usb 1-8: Product: RIM Composite Device [ 5791.058941] usb 1-8: Manufacturer: Research In Motion [ 5791.058944] usb 1-8: SerialNumber: ... [ 5791.069093] usb-storage 1-8:1.0: USB Mass Storage device detected [ 5791.069152] usb-storage 1-8:1.0: Quirks match for vid 0fca pid 8004: 400 [ 5791.069296] usb-storage 1-8:1.1: USB Mass Storage device detected [ 5791.069919] usb-storage 1-8:1.1: Quirks match for vid 0fca pid 8004: 400 [ 5791.069946] scsi19 : usb-storage 1-8:1.1 [ 5792.073872] scsi 19:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS [ 5792.074715] sd 19:0:0:0: Attached scsi generic sg4 type 0 [ 5792.076102] sd 19:0:0:0: [sdd] Attached SCSI removable disk [ 5814.301694] lp: driver loaded but no devices found [ 5814.407332] lp: driver loaded but no devices found [ 5925.375689] sd 19:0:0:0: [sdd] 494080 512-byte logical blocks: (252 MB/241 MiB) [ 5925.376927] sd 19:0:0:0: [sdd] No Caching mode page found [ 5925.376931] sd 19:0:0:0: [sdd] Assuming drive cache: write through [ 5925.379056] sd 19:0:0:0: [sdd] No Caching mode page found [ 5925.379060] sd 19:0:0:0: [sdd] Assuming drive cache: write through [ 5925.380448] sdd: sdd1 [ 5995.670996] sdd: detected capacity change from 252968960 to 0 [ 6024.786307] usb 1-8: USB disconnect, device number 22 [ 6040.674038] usb 1-8: new high-speed USB device number 23 using ehci-pci [ 6040.790291] usb 1-8: New USB device found, idVendor=04e8, idProduct=689e [ 6040.790296] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6040.790300] usb 1-8: Product: Samsung Android USB Device [ 6040.790303] usb 1-8: Manufacturer: SAMSUNG Electronics Co., Ltd. [ 6040.790306] usb 1-8: SerialNumber: ... [ 6040.792116] cdc_acm 1-8:1.0: This device cannot do calls on its own. It is not a modem. [ 6040.792224] cdc_acm 1-8:1.0: ttyACM0: USB ACM device [ 6040.794322] usb-storage 1-8:1.3: USB Mass Storage device detected [ 6040.794404] scsi20 : usb-storage 1-8:1.3 [ 6041.796987] scsi 20:0:0:0: Direct-Access SAMSUNG GT-S5830 Card 0100 PQ: 0 ANSI: 2 [ 6041.797659] sd 20:0:0:0: Attached scsi generic sg4 type 0 [ 6041.800091] sd 20:0:0:0: [sdd] Attached SCSI removable disk [ 6066.687402] sd 20:0:0:0: [sdd] 3858489 512-byte logical blocks: (1.97 GB/1.83 GiB) [ 6066.898660] sd 20:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6067.031421] sdd: [ 6097.474669] usb 1-8: USB disconnect, device number 23 [ 6097.477669] sd 20:0:0:0: [sdd] Synchronizing SCSI cache [ 6097.477733] sd 20:0:0:0: [sdd] [ 6097.477737] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 6097.571495] FAT-fs (sdd): unable to read boot sector to mark fs as dirty [ 6140.447036] usb 1-8: new high-speed USB device number 24 using ehci-pci [ 6140.779791] usb 1-8: New USB device found, idVendor=046d, idProduct=0825 [ 6140.779796] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6140.779800] usb 1-8: SerialNumber: ... [ 6140.780932] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825) [ 6140.877997] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:03.3/usb1/1-8/1-8:1.0/input/input21 [ 6142.193208] set resolution quirk: cval->res = 384 [ 6142.193588] usbcore: registered new interface driver snd-usb-audio [ 6657.818525] lp: driver loaded but no devices found [ 6657.916343] lp: driver loaded but no devices found [ 6715.065235] usb 1-8: USB disconnect, device number 24 [ 6793.443036] usb 1-8: new high-speed USB device number 25 using ehci-pci [ 6793.558117] usb 1-8: New USB device found, idVendor=05ac, idProduct=1303 [ 6793.558122] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6793.558126] usb 1-8: Product: iPod [ 6793.558129] usb 1-8: Manufacturer: Apple Inc. [ 6793.558132] usb 1-8: SerialNumber: ... [ 6793.558537] usb-storage 1-8:1.0: USB Mass Storage device detected [ 6793.559627] scsi21 : usb-storage 1-8:1.0 [ 6794.560805] scsi 21:0:0:0: Direct-Access Apple iPod 2.70 PQ: 0 ANSI: 2 [ 6794.561442] sd 21:0:0:0: Attached scsi generic sg4 type 0 [ 6794.561791] sd 21:0:0:0: [sdd] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 6794.562412] sd 21:0:0:0: [sdd] Write Protect is off [ 6794.562418] sd 21:0:0:0: [sdd] Mode Sense: 6e 00 00 08 [ 6794.563050] sd 21:0:0:0: [sdd] Incomplete mode parameter data [ 6794.563054] sd 21:0:0:0: [sdd] Assuming drive cache: write through [ 6794.564409] sd 21:0:0:0: [sdd] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 6794.565661] sd 21:0:0:0: [sdd] Incomplete mode parameter data [ 6794.565665] sd 21:0:0:0: [sdd] Assuming drive cache: write through [ 6794.566800] sdd: [ 6794.568538] sd 21:0:0:0: [sdd] 492797 4096-byte logical blocks: (2.01 GB/1.87 GiB) [ 6794.569906] sd 21:0:0:0: [sdd] Incomplete mode parameter data [ 6794.569911] sd 21:0:0:0: [sdd] Assuming drive cache: write through [ 6794.569916] sd 21:0:0:0: [sdd] Attached SCSI removable disk [ 6908.114977] lp: driver loaded but no devices found [ 6908.229629] lp: driver loaded but no devices found