[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x701f6633] [ 0.000000] Linux version 5.10.0-13-arm64 (XXX@XXX) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.106-1 (2022-03-17) [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS=0xeb790000 SMBIOS 3.0=0xeb770000 ACPI 2.0=0xec000000 MEMATTR=0xda6e1698 MOKvar=0xda6d4000 MEMRESERVE=0xd5909398 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000EC000000 000024 (v02 PHYLTD) [ 0.000000] ACPI: XSDT 0x00000000EBFF0000 000074 (v01 PHYLTD PHYTIUM. 00000001 GGCL 00010000) [ 0.000000] ACPI: FACP 0x00000000EBFE0000 000114 (v06 PHYLTD PHYTIUM. 00000001 PHYT 00000001) [ 0.000000] ACPI: DSDT 0x00000000EBF70000 0018C2 (v02 PHYLTD PHYTIUM. 00000001 INTL 20190509) [ 0.000000] ACPI: GTDT 0x00000000EBFD0000 000098 (v02 PHYLTD PHYTIUM. 00000001 PHYT 00000001) [ 0.000000] ACPI: IORT 0x00000000EBFC0000 000080 (v00 PHYLTD PHYTIUM. 00000001 PHYT 00000001) [ 0.000000] ACPI: APIC 0x00000000EBFB0000 0002D8 (v04 PHYLTD PHYTIUM. 00000001 PHYT 00000001) [ 0.000000] ACPI: MCFG 0x00000000EBFA0000 00003C (v01 PHYLTD PHYTIUM. 00000001 PHYT 00000001) [ 0.000000] ACPI: SPCR 0x00000000EBF90000 000050 (v02 PHYLTD PHYTIUM. 00000001 PHYT 00000001) [ 0.000000] ACPI: SSDT 0x00000000EBF80000 000515 (v02 PHYLTD PHYTIUM. 00000001 INTL 20190509) [ 0.000000] ACPI: PPTT 0x00000000EBF60000 000396 (v01 PHYLTD PHYTIUM. 00000001 PHYT 00000001) [ 0.000000] ACPI: VFCT 0x00000000EBF50000 00EA84 (v01 PHYLTD PHYTIUM. 00000001 AMD 31504F47) [ 0.000000] ACPI: BGRT 0x00000000EBF40000 000038 (v01 GWTLTD GWTLBGRT 00010000 GGCL 00010000) [ 0.000000] ACPI: SPCR: console: pl011,mmio32,0x28001000,115200 [ 0.000000] ACPI: NUMA: Failed to initialise from firmware [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000217fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x217f044b00-0x217f046fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000217fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000008001ffff] [ 0.000000] node 0: [mem 0x0000000080020000-0x000000008002ffff] [ 0.000000] node 0: [mem 0x0000000080030000-0x000000008402ffff] [ 0.000000] node 0: [mem 0x0000000084030000-0x00000000e9d0ffff] [ 0.000000] node 0: [mem 0x00000000e9d10000-0x00000000ebe0ffff] [ 0.000000] node 0: [mem 0x00000000ebe10000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000002000000000-0x000000217fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000217fffffff] [ 0.000000] On node 0 totalpages: 2080768 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 507904 pages, LIFO batch:63 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:63 [ 0.000000] cma: Reserved 64 MiB at 0x00000000f8000000 [ 0.000000] psci: probing for conduit method from ACPI. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] ACPI: SRAT not present [ 0.000000] percpu: Embedded 33 pages/cpu s95384 r8192 d31592 u135168 [ 0.000000] pcpu-alloc: s95384 r8192 d31592 u135168 alloc=33*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2048000 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-arm64 root=UUID=HASH_E23-B6FD-064B-4585-518A28808F3B ro console=tty0 quiet [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB) [ 0.000000] Memory: 2791216K/8323072K available (11840K kernel code, 2440K rwdata, 7032K rodata, 5440K init, 598K bss, 384396K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x5a0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] ftrace: allocating 38599 entries in 151 pages [ 0.000000] ftrace: allocated 151 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 128 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000029b00000 [ 0.000000] ACPI: SRAT not present [ 0.000000] ITS [mem 0x29a20000-0x29a3ffff] [ 0.000000] XXX@XXX: allocated 65536 Devices @2000200000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000002000190000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000020001a0000 [ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns [ 0.000002] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns [ 0.000050] Console: colour dummy device 80x25 [ 0.000065] printk: console [tty0] enabled [ 0.000098] ACPI: Core revision 20200925 [ 0.000283] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=192000) [ 0.000288] pid_max: default: 32768 minimum: 301 [ 0.000331] LSM: Security Framework initializing [ 0.000342] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000381] AppArmor: AppArmor initialized [ 0.000385] TOMOYO Linux initialized [ 0.000434] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000460] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001274] rcu: Hierarchical SRCU implementation. [ 0.001569] Platform MSI: ITS@0x29a20000 domain created [ 0.001576] PCI/MSI: ITS@0x29a20000 domain created [ 0.001582] fsl-mc MSI: ITS@0x29a20000 domain created [ 0.001590] Remapping and enabling EFI services. [ 0.003056] smp: Bringing up secondary CPUs ... [ 0.025436] Detected PIPT I-cache on CPU1 [ 0.025452] GICv3: CPU1: found redistributor 1 region 1:0x0000000029b20000 [ 0.025474] GICv3: CPU1: using allocated LPI pending table @0x00000020001b0000 [ 0.025493] CPU1: Booted secondary processor 0x0000000001 [0x701f6633] [ 0.050598] Detected PIPT I-cache on CPU2 [ 0.050610] GICv3: CPU2: found redistributor 100 region 2:0x0000000029b40000 [ 0.050635] GICv3: CPU2: using allocated LPI pending table @0x00000020001c0000 [ 0.050651] CPU2: Booted secondary processor 0x0000000100 [0x701f6633] [ 0.075755] Detected PIPT I-cache on CPU3 [ 0.075763] GICv3: CPU3: found redistributor 101 region 3:0x0000000029b60000 [ 0.075782] GICv3: CPU3: using allocated LPI pending table @0x00000020001d0000 [ 0.075795] CPU3: Booted secondary processor 0x0000000101 [0x701f6633] [ 0.100923] Detected PIPT I-cache on CPU4 [ 0.100935] GICv3: CPU4: found redistributor 200 region 4:0x0000000029b80000 [ 0.100955] GICv3: CPU4: using allocated LPI pending table @0x00000020001e0000 [ 0.100970] CPU4: Booted secondary processor 0x0000000200 [0x701f6633] [ 0.126082] Detected PIPT I-cache on CPU5 [ 0.126090] GICv3: CPU5: found redistributor 201 region 5:0x0000000029ba0000 [ 0.126108] GICv3: CPU5: using allocated LPI pending table @0x00000020001f0000 [ 0.126120] CPU5: Booted secondary processor 0x0000000201 [0x701f6633] [ 0.151252] Detected PIPT I-cache on CPU6 [ 0.151265] GICv3: CPU6: found redistributor 300 region 6:0x0000000029bc0000 [ 0.151304] GICv3: CPU6: using allocated LPI pending table @0x0000002000280000 [ 0.151320] CPU6: Booted secondary processor 0x0000000300 [0x701f6633] [ 0.176322] Detected PIPT I-cache on CPU7 [ 0.176330] GICv3: CPU7: found redistributor 301 region 7:0x0000000029be0000 [ 0.176349] GICv3: CPU7: using allocated LPI pending table @0x0000002000290000 [ 0.176361] CPU7: Booted secondary processor 0x0000000301 [0x701f6633] [ 0.176400] smp: Brought up 1 node, 8 CPUs [ 0.176407] SMP: Total of 8 processors activated. [ 0.176410] CPU features: detected: 32-bit EL0 Support [ 0.176412] CPU features: detected: CRC32 instructions [ 0.176415] CPU features: detected: 32-bit EL1 Support [ 0.188934] CPU: All CPU(s) started at EL2 [ 0.188963] alternatives: patching kernel code [ 0.260810] node 0 deferred pages initialised in 72ms [ 0.261121] devtmpfs: initialized [ 0.261595] Registered cp15_barrier emulation handler [ 0.261602] Registered setend emulation handler [ 0.261605] KASLR disabled due to lack of seed [ 0.261693] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.261738] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.262403] pinctrl core: initialized pinctrl subsystem [ 0.262673] SMBIOS 3.2.0 present. [ 0.262681] DMI: GreatWall \xe9\x95\xbf\xe5\x9f\x8eTN140A2/GW-001N1C-FTF, BIOS KunLun BIOS V4.0 09/02/2021 [ 0.262939] NET: Registered protocol family 16 [ 0.263499] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.263630] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.263825] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.264133] thermal_sys: Registered thermal governor 'fair_share' [ 0.264135] thermal_sys: Registered thermal governor 'bang_bang' [ 0.264137] thermal_sys: Registered thermal governor 'step_wise' [ 0.264139] thermal_sys: Registered thermal governor 'user_space' [ 0.264141] thermal_sys: Registered thermal governor 'power_allocator' [ 0.264170] cpuidle: using governor ladder [ 0.264177] cpuidle: using governor menu [ 0.264218] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.264295] ASID allocator initialised with 32768 entries [ 0.264345] ACPI: bus type PCI registered [ 0.264348] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.264444] Serial: AMBA PL011 UART driver [ 0.266246] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.266249] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.266252] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.266254] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.437178] ACPI: Added _OSI(Module Device) [ 0.437180] ACPI: Added _OSI(Processor Device) [ 0.437182] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.437184] ACPI: Added _OSI(Processor Aggregator Device) [ 0.437187] ACPI: Added _OSI(Linux-Dell-Video) [ 0.437188] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.437191] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.438662] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.439456] ACPI: Interpreter enabled [ 0.439459] ACPI: Using GIC for interrupt routing [ 0.439474] ACPI: MCFG table detected, 1 entries [ 0.444647] ARMH0011:00: ttyAMA0 at MMIO 0x28001000 (irq = 13, base_baud = 0) is a SBSA [ 0.444677] printk: console [ttyAMA0] enabled [ 0.445248] ARMH0011:01: ttyAMA1 at MMIO 0x28000000 (irq = 14, base_baud = 0) is a SBSA [ 0.445750] ARMH0011:02: ttyAMA2 at MMIO 0x28002000 (irq = 15, base_baud = 0) is a SBSA [ 0.446243] ARMH0011:03: ttyAMA3 at MMIO 0x28003000 (irq = 16, base_baud = 0) is a SBSA [ 0.448112] ACPI: PCI Interrupt Link [LNKA] (IRQs *60) [ 0.448139] ACPI: PCI Interrupt Link [LNKB] (IRQs *61) [ 0.448166] ACPI: PCI Interrupt Link [LNKC] (IRQs *62) [ 0.448191] ACPI: PCI Interrupt Link [LNKD] (IRQs *63) [ 0.448234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.448241] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.448418] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER LTR] [ 0.448573] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.449011] acpi PNP0A08:00: ECAM area [mem 0x40000000-0x4fffffff] reserved by PNP0C02:00 [ 0.449028] acpi PNP0A08:00: ECAM at [mem 0x40000000-0x4fffffff] for [bus 00-ff] [ 0.449074] Remapped I/O 0x0000000050000000 to [io 0x0000-0xefffff window] [ 0.449142] PCI host bridge to bus 0000:00 [ 0.449145] pci_bus 0000:00: root bus resource [mem 0x58000000-0x7fffffff window] [ 0.449148] pci_bus 0000:00: root bus resource [mem 0x1000000000-0x1fffffffff window] [ 0.449150] pci_bus 0000:00: root bus resource [io 0x0000-0xefffff window] [ 0.449153] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.449169] pci 0000:00:00.0: [17cd:dc16] type 01 class 0x060400 [ 0.449176] pci 0000:00:00.0: reg 0x10: [mem 0x1010200000-0x10102fffff 64bit pref] [ 0.449205] pci 0000:00:00.0: supports D1 D2 [ 0.449208] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449315] pci 0000:00:01.0: [17cd:dc08] type 01 class 0x060400 [ 0.449322] pci 0000:00:01.0: reg 0x10: [mem 0x1010300000-0x10103fffff 64bit pref] [ 0.449346] pci 0000:00:01.0: supports D1 D2 [ 0.449348] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449415] pci 0000:00:02.0: [17cd:dc01] type 01 class 0x060400 [ 0.449422] pci 0000:00:02.0: reg 0x10: [mem 0x1010400000-0x10104fffff 64bit pref] [ 0.449448] pci 0000:00:02.0: supports D1 D2 [ 0.449451] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449516] pci 0000:00:03.0: [17cd:dc16] type 01 class 0x060400 [ 0.449523] pci 0000:00:03.0: reg 0x10: [mem 0x1010500000-0x10105fffff 64bit pref] [ 0.449551] pci 0000:00:03.0: supports D1 D2 [ 0.449553] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449628] pci 0000:00:04.0: [17cd:dc08] type 01 class 0x060400 [ 0.449635] pci 0000:00:04.0: reg 0x10: [mem 0x1010600000-0x10106fffff 64bit pref] [ 0.449663] pci 0000:00:04.0: supports D1 D2 [ 0.449665] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449734] pci 0000:00:05.0: [17cd:dc01] type 01 class 0x060400 [ 0.449741] pci 0000:00:05.0: reg 0x10: [mem 0x1010700000-0x10107fffff 64bit pref] [ 0.449768] pci 0000:00:05.0: supports D1 D2 [ 0.449770] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.449884] pci 0000:01:00.0: [15b7:5009] type 00 class 0x010802 [ 0.449898] pci 0000:01:00.0: reg 0x10: [mem 0x58400000-0x58403fff 64bit] [ 0.449916] pci 0000:01:00.0: reg 0x20: [mem 0x58404000-0x584040ff 64bit] [ 0.463508] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330 [ 0.463527] pci 0000:03:00.0: reg 0x10: [mem 0x58300000-0x58307fff 64bit] [ 0.463616] pci 0000:03:00.0: PME# supported from D3cold [ 0.475477] pci 0000:04:00.0: [1002:6987] type 00 class 0x030000 [ 0.475493] pci 0000:04:00.0: reg 0x10: [mem 0x1000000000-0x100fffffff 64bit pref] [ 0.475503] pci 0000:04:00.0: reg 0x18: [mem 0x1010000000-0x10101fffff 64bit pref] [ 0.475511] pci 0000:04:00.0: reg 0x20: [io 0x1000-0x10ff] [ 0.475518] pci 0000:04:00.0: reg 0x24: [mem 0x58200000-0x5823ffff] [ 0.475525] pci 0000:04:00.0: reg 0x30: [mem 0x58500000-0x5851ffff pref] [ 0.475531] pci 0000:04:00.0: enabling Extended Tags [ 0.475551] pci 0000:04:00.0: BAR 0: assigned to efifb [ 0.475606] pci 0000:04:00.0: supports D1 D2 [ 0.475608] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.475726] pci 0000:04:00.1: [1002:aae0] type 00 class 0x040300 [ 0.475739] pci 0000:04:00.1: reg 0x10: [mem 0x58240000-0x58243fff 64bit] [ 0.475763] pci 0000:04:00.1: enabling Extended Tags [ 0.475810] pci 0000:04:00.1: supports D1 D2 [ 0.487481] pci 0000:05:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.487502] pci 0000:05:00.0: reg 0x10: [mem 0x58100000-0x58100fff 64bit] [ 0.487588] pci 0000:05:00.0: PME# supported from D0 D3cold [ 0.487616] pci 0000:05:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:04.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link) [ 0.487733] pci 0000:06:00.0: [10ec:c822] type 00 class 0x028000 [ 0.487753] pci 0000:06:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.487778] pci 0000:06:00.0: reg 0x18: [mem 0x58000000-0x5800ffff 64bit] [ 0.487898] pci 0000:06:00.0: supports D1 D2 [ 0.487900] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.499479] pci 0000:00:03.0: BAR 15: assigned [mem 0x1000000000-0x1017ffffff 64bit pref] [ 0.499482] pci 0000:00:00.0: BAR 0: assigned [mem 0x1018000000-0x10180fffff 64bit pref] [ 0.499486] pci 0000:00:00.0: BAR 14: assigned [mem 0x58000000-0x580fffff] [ 0.499489] pci 0000:00:01.0: BAR 0: assigned [mem 0x1018100000-0x10181fffff 64bit pref] [ 0.499494] pci 0000:00:02.0: BAR 0: assigned [mem 0x1018200000-0x10182fffff 64bit pref] [ 0.499497] pci 0000:00:02.0: BAR 14: assigned [mem 0x58100000-0x581fffff] [ 0.499500] pci 0000:00:03.0: BAR 0: assigned [mem 0x1018300000-0x10183fffff 64bit pref] [ 0.499504] pci 0000:00:03.0: BAR 14: assigned [mem 0x58200000-0x582fffff] [ 0.499506] pci 0000:00:04.0: BAR 0: assigned [mem 0x1018400000-0x10184fffff 64bit pref] [ 0.499510] pci 0000:00:04.0: BAR 14: assigned [mem 0x58300000-0x583fffff] [ 0.499513] pci 0000:00:05.0: BAR 0: assigned [mem 0x1018500000-0x10185fffff 64bit pref] [ 0.499516] pci 0000:00:05.0: BAR 14: assigned [mem 0x58400000-0x584fffff] [ 0.499519] pci 0000:00:03.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.499521] pci 0000:00:05.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.499525] pci 0000:01:00.0: BAR 0: assigned [mem 0x58000000-0x58003fff 64bit] [ 0.499532] pci 0000:01:00.0: BAR 4: assigned [mem 0x58004000-0x580040ff 64bit] [ 0.499540] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.499543] pci 0000:00:00.0: bridge window [mem 0x58000000-0x580fffff] [ 0.499546] pci 0000:00:01.0: PCI bridge to [bus 02] [ 0.499551] pci 0000:03:00.0: BAR 0: assigned [mem 0x58100000-0x58107fff 64bit] [ 0.499561] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.499563] pci 0000:00:02.0: bridge window [mem 0x58100000-0x581fffff] [ 0.499568] pci 0000:04:00.0: BAR 0: assigned [mem 0x1000000000-0x100fffffff 64bit pref] [ 0.499576] pci 0000:04:00.0: BAR 2: assigned [mem 0x1010000000-0x10101fffff 64bit pref] [ 0.499583] pci 0000:04:00.0: BAR 5: assigned [mem 0x58200000-0x5823ffff] [ 0.499586] pci 0000:04:00.0: BAR 6: assigned [mem 0x58240000-0x5825ffff pref] [ 0.499590] pci 0000:04:00.1: BAR 0: assigned [mem 0x58260000-0x58263fff 64bit] [ 0.499598] pci 0000:04:00.0: BAR 4: assigned [io 0x1000-0x10ff] [ 0.499601] pci 0000:00:03.0: PCI bridge to [bus 04] [ 0.499604] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 0.499606] pci 0000:00:03.0: bridge window [mem 0x58200000-0x582fffff] [ 0.499609] pci 0000:00:03.0: bridge window [mem 0x1000000000-0x1017ffffff 64bit pref] [ 0.499613] pci 0000:05:00.0: BAR 0: assigned [mem 0x58300000-0x58300fff 64bit] [ 0.499623] pci 0000:00:04.0: PCI bridge to [bus 05] [ 0.499626] pci 0000:00:04.0: bridge window [mem 0x58300000-0x583fffff] [ 0.499631] pci 0000:06:00.0: BAR 2: assigned [mem 0x58400000-0x5840ffff 64bit] [ 0.499644] pci 0000:06:00.0: BAR 0: assigned [io 0x2000-0x20ff] [ 0.499649] pci 0000:00:05.0: PCI bridge to [bus 06] [ 0.499651] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] [ 0.499654] pci 0000:00:05.0: bridge window [mem 0x58400000-0x584fffff] [ 0.499658] pci_bus 0000:00: resource 4 [mem 0x58000000-0x7fffffff window] [ 0.499660] pci_bus 0000:00: resource 5 [mem 0x1000000000-0x1fffffffff window] [ 0.499662] pci_bus 0000:00: resource 6 [io 0x0000-0xefffff window] [ 0.499664] pci_bus 0000:01: resource 1 [mem 0x58000000-0x580fffff] [ 0.499666] pci_bus 0000:03: resource 1 [mem 0x58100000-0x581fffff] [ 0.499667] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.499669] pci_bus 0000:04: resource 1 [mem 0x58200000-0x582fffff] [ 0.499671] pci_bus 0000:04: resource 2 [mem 0x1000000000-0x1017ffffff 64bit pref] [ 0.499673] pci_bus 0000:05: resource 1 [mem 0x58300000-0x583fffff] [ 0.499675] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.499677] pci_bus 0000:06: resource 1 [mem 0x58400000-0x584fffff] [ 0.499823] iommu: Default domain type: Translated [ 0.499879] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.499882] pci 0000:04:00.0: vgaarb: bridge control possible [ 0.499885] pci 0000:04:00.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.499886] vgaarb: loaded [ 0.500014] EDAC MC: Ver: 3.0.0 [ 0.500186] Registered efivars operations [ 0.500605] NetLabel: Initializing [ 0.500607] NetLabel: domain hash size = 128 [ 0.500609] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.500629] NetLabel: unlabeled traffic allowed by default [ 0.500780] clocksource: Switched to clocksource arch_sys_counter [ 0.520509] VFS: Disk quotas dquot_6.6.0 [ 0.520541] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.520839] AppArmor: AppArmor Filesystem Enabled [ 0.520921] pnp: PnP ACPI init [ 0.521405] system 00:00: [mem 0x40000000-0x4fffffff] could not be reserved [ 0.521416] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.521428] pnp: PnP ACPI: found 1 devices [ 0.524065] NET: Registered protocol family 2 [ 0.524410] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.526236] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.526404] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.526819] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.526944] TCP: Hash tables configured (established 65536 bind 65536) [ 0.527056] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.527116] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.527204] NET: Registered protocol family 1 [ 0.527215] NET: Registered protocol family 44 [ 0.527253] pci 0000:03:00.0: enabling device (0000 -> 0002) [ 0.527338] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0 [ 0.527362] pci 0000:05:00.0: enabling device (0000 -> 0002) [ 0.527389] PCI: CLS 0 bytes, default 64 [ 0.527505] Trying to unpack rootfs image as initramfs... [ 1.118415] Freeing initrd memory: 28720K [ 1.118788] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available [ 1.118811] kvm [1]: IPA Size Limit: 44 bits [ 1.119248] kvm [1]: vgic-v2@29c20000 [ 1.119266] kvm [1]: GIC system register CPU interface enabled [ 1.119368] kvm [1]: vgic interrupt IRQ9 [ 1.119479] kvm [1]: Hyp mode initialized successfully [ 1.120135] Initialise system trusted keyrings [ 1.120159] Key type blacklist registered [ 1.120239] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 1.121887] zbud: loaded [ 1.122152] integrity: Platform Keyring initialized [ 1.122157] Key type asymmetric registered [ 1.122159] Asymmetric key parser 'x509' registered [ 1.122173] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.122247] io scheduler mq-deadline registered [ 1.123314] PCI Interrupt Link [LNKA] enabled at IRQ 60 [ 1.124217] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.124411] efifb: probing for efifb [ 1.124470] efifb: framebuffer at 0x1000000000, using 8100k, total 8100k [ 1.124472] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.124473] efifb: scrolling: redraw [ 1.124475] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.124636] Console: switching to colour frame buffer device 240x67 [ 1.142850] fb0: EFI VGA frame buffer device [ 1.143428] ACPI GTDT: found 2 SBSA generic Watchdog(s). [ 1.144346] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.144881] Serial: AMBA driver [ 1.144964] msm_serial: driver initialized [ 1.145810] mousedev: PS/2 mouse device common for all mice [ 1.158085] rtc-efi rtc-efi.0: registered as rtc0 [ 1.164137] rtc-efi rtc-efi.0: setting system clock to 2022-09-20T06:23:45 UTC (1663655025) [ 1.164498] ledtrig-cpu: registered to indicate activity on CPUs [ 1.164732] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.165160] NET: Registered protocol family 10 [ 1.177681] Segment Routing with IPv6 [ 1.177714] mip6: Mobile IPv6 [ 1.177719] NET: Registered protocol family 17 [ 1.177780] mpls_gso: MPLS GSO support [ 1.177931] registered taskstats version 1 [ 1.177936] Loading compiled-in X.509 certificates [ 1.216862] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.216881] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c' [ 1.216954] zswap: loaded using pool lzo/zbud [ 1.217132] Key type ._fscrypt registered [ 1.217135] Key type .fscrypt registered [ 1.217137] Key type fscrypt-provisioning registered [ 1.217209] AppArmor: AppArmor sha1 policy hashing enabled [ 1.220322] Freeing unused kernel memory: 5440K [ 1.295900] Checked W+X mappings: passed, no W+X pages found [ 1.295917] Run /init as init process [ 1.295919] with arguments: [ 1.295921] /init [ 1.295922] with environment: [ 1.295924] HOME=/ [ 1.295925] TERM=linux [ 1.295927] BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-arm64 [ 1.402162] pps_core: LinuxPPS API ver. 1 registered [ 1.402166] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 1.403445] PTP clock support registered [ 1.414881] stmmac: loading out-of-tree module taints kernel. [ 1.414884] stmmac: loading out-of-tree module taints kernel. [ 1.415275] stmmac: module verification failed: signature and/or required key missing - tainting kernel [ 1.419050] stmmaceth PHYT0004:00: IRQ eth_wake_irq not found [ 1.419053] stmmaceth PHYT0004:00: IRQ eth_lpi not found [ 1.419078] stmmaceth PHYT0004:00: Unicast table entries set to unexpected value 65 [ 1.419134] stmmaceth PHYT0004:00: no reset control found [ 1.420725] ACPI: bus type USB registered [ 1.420792] stmmaceth PHYT0004:00: User ID: 0x10, Synopsys ID: 0x36 [ 1.420799] usbcore: registered new interface driver usbfs [ 1.420813] stmmaceth PHYT0004:00: DWMAC1000 [ 1.420815] stmmaceth PHYT0004:00: DMA HW capability register supported [ 1.420818] stmmaceth PHYT0004:00: RX Checksum Offload Engine supported [ 1.420820] stmmaceth PHYT0004:00: COE Type 2 [ 1.420823] usbcore: registered new interface driver hub [ 1.420824] stmmaceth PHYT0004:00: TX Checksum insertion supported [ 1.420827] stmmaceth PHYT0004:00: Normal descriptors [ 1.420829] stmmaceth PHYT0004:00: Ring mode enabled [ 1.420831] stmmaceth PHYT0004:00: Enable RX Mitigation via HW Watchdog Timer [ 1.420835] stmmaceth PHYT0004:00: device MAC address XXX [ 1.420851] usbcore: registered new device driver usb [ 1.427411] nvme nvme0: pci function 0000:01:00.0 [ 1.431065] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 1.431579] stmmaceth PHYT0004:01: IRQ eth_wake_irq not found [ 1.431582] stmmaceth PHYT0004:01: IRQ eth_lpi not found [ 1.431607] stmmaceth PHYT0004:01: Unicast table entries set to unexpected value 65 [ 1.431660] stmmaceth PHYT0004:01: no reset control found [ 1.431747] stmmaceth PHYT0004:01: User ID: 0x10, Synopsys ID: 0x36 [ 1.431751] stmmaceth PHYT0004:01: DWMAC1000 [ 1.431754] stmmaceth PHYT0004:01: DMA HW capability register supported [ 1.431756] stmmaceth PHYT0004:01: RX Checksum Offload Engine supported [ 1.431758] stmmaceth PHYT0004:01: COE Type 2 [ 1.431760] stmmaceth PHYT0004:01: TX Checksum insertion supported [ 1.431762] stmmaceth PHYT0004:01: Normal descriptors [ 1.431764] stmmaceth PHYT0004:01: Ring mode enabled [ 1.431766] stmmaceth PHYT0004:01: Enable RX Mitigation via HW Watchdog Timer [ 1.431769] stmmaceth PHYT0004:01: device MAC address XXX [ 1.435248] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.435259] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 1.438540] stmmaceth PHYT0004:01: No PHY found [ 1.438652] stmmaceth PHYT0004:01: stmmac_dvr_probe: MDIO bus (id: 1) registration failed [ 1.495862] xhci_hcd 0000:03:00.0: hcc params 0x0200e080 hci version 0x100 quirks 0x0000000010800410 [ 1.496278] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.496282] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.496284] usb usb1: Product: xHCI Host Controller [ 1.496286] usb usb1: Manufacturer: Linux 5.10.0-13-arm64 xhci-hcd [ 1.496288] usb usb1: SerialNumber: ... [ 1.496510] hub 1-0:1.0: USB hub found [ 1.496527] hub 1-0:1.0: 2 ports detected [ 1.496739] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.496745] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 1.496751] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 1.496804] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.496844] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.496847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.496849] usb usb2: Product: xHCI Host Controller [ 1.496852] usb usb2: Manufacturer: Linux 5.10.0-13-arm64 xhci-hcd [ 1.496853] usb usb2: SerialNumber: ... [ 1.497003] hub 2-0:1.0: USB hub found [ 1.497016] hub 2-0:1.0: 2 ports detected [ 1.497312] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.497320] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 1.497496] xhci_hcd 0000:05:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890 [ 1.497729] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.497732] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.497735] usb usb3: Product: xHCI Host Controller [ 1.497737] usb usb3: Manufacturer: Linux 5.10.0-13-arm64 xhci-hcd [ 1.497738] usb usb3: SerialNumber: ... [ 1.497904] hub 3-0:1.0: USB hub found [ 1.497917] hub 3-0:1.0: 1 port detected [ 1.498086] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 1.498091] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4 [ 1.498096] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed [ 1.498163] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.498166] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.498168] usb usb4: Product: xHCI Host Controller [ 1.498170] usb usb4: Manufacturer: Linux 5.10.0-13-arm64 xhci-hcd [ 1.498172] usb usb4: SerialNumber: ... [ 1.498318] hub 4-0:1.0: USB hub found [ 1.498337] hub 4-0:1.0: 4 ports detected [ 1.499776] nvme nvme0: allocated 32 MiB host memory buffer. [ 1.501583] nvme nvme0: 8/0/0 default/read/poll queues [ 1.505064] nvme0n1: p1 p2 p3 [ 1.582111] stmmaceth PHYT0004:00 enaphyt4i0: renamed from eth0 [ 1.637073] PM: Image not found (code -22) [ 1.732560] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.734138] random: fast init done [ 1.756796] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.792996] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 1.828787] usb 1-2: new low-speed USB device number 2 using xhci_hcd [ 1.841936] systemd[1]: Inserted module 'autofs4' [ 1.864385] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 1.864668] systemd[1]: Detected architecture arm64. [ 1.864993] systemd[1]: Set hostname to ... [ 1.914199] usb 3-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.914203] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.914206] usb 3-1: Product: USB2.0 Hub [ 1.915225] hub 3-1:1.0: USB hub found [ 1.915589] hub 3-1:1.0: 4 ports detected [ 2.005428] systemd[1]: Queued start job for default target Graphical Interface. [ 2.006053] random: systemd: uninitialized urandom read (16 bytes read) [ 2.007175] systemd[1]: Created slice system-getty.slice. [ 2.007273] random: systemd: uninitialized urandom read (16 bytes read) [ 2.007669] systemd[1]: Created slice system-modprobe.slice. [ 2.007694] random: systemd: uninitialized urandom read (16 bytes read) [ 2.008172] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 2.008563] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.008926] systemd[1]: Created slice User and Session Slice. [ 2.009057] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.009154] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.009447] systemd[1]: Set up automount ... [ 2.009526] systemd[1]: Reached target Local Encrypted Volumes. [ 2.009601] systemd[1]: Reached target Remote File Systems. [ 2.009629] systemd[1]: Reached target Slices. [ 2.009871] systemd[1]: Listening on Syslog Socket. [ 2.010047] systemd[1]: Listening on fsck to fsckd communication Socket. [ 2.010150] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 2.010399] systemd[1]: Listening on Journal Audit Socket. [ 2.010557] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.010763] systemd[1]: Listening on Journal Socket. [ 2.011107] systemd[1]: Listening on udev Control Socket. [ 2.011278] systemd[1]: Listening on udev Kernel Socket. [ 2.012687] systemd[1]: Mounting Huge Pages File System... [ 2.014042] systemd[1]: Mounting POSIX Message Queue File System... [ 2.015495] systemd[1]: Mounting Kernel Debug File System... [ 2.017083] systemd[1]: Mounting Kernel Trace File System... [ 2.018806] systemd[1]: Starting Set the console keyboard layout... [ 2.020382] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 2.022299] systemd[1]: Starting Load Kernel Module configfs... [ 2.024028] systemd[1]: Starting Load Kernel Module drm... [ 2.025757] systemd[1]: Starting Load Kernel Module fuse... [ 2.026304] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 2.026382] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 2.029163] systemd[1]: Starting Journal Service... [ 2.031459] systemd[1]: Starting Load Kernel Modules... [ 2.033020] systemd[1]: Starting Remount Root and Kernel File Systems... [ 2.034737] systemd[1]: Starting Coldplug All udev Devices... [ 2.037554] fuse: init (API version 7.32) [ 2.037789] systemd[1]: Mounted Huge Pages File System. [ 2.038000] systemd[1]: Mounted POSIX Message Queue File System. [ 2.038163] systemd[1]: Mounted Kernel Debug File System. [ 2.038353] systemd[1]: Mounted Kernel Trace File System. [ 2.038913] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 2.039555] systemd[1]: XXX@XXX: Succeeded. [ 2.039973] systemd[1]: Finished Load Kernel Module configfs. [ 2.040492] systemd[1]: XXX@XXX: Succeeded. [ 2.041113] systemd[1]: Finished Load Kernel Module fuse. [ 2.042889] systemd[1]: Mounting FUSE Control File System... [ 2.044612] systemd[1]: Mounting Kernel Configuration File System... [ 2.045516] systemd[1]: Finished Load Kernel Modules. [ 2.047494] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro [ 2.047556] systemd[1]: Starting Apply Kernel Variables... [ 2.050071] systemd[1]: Mounted FUSE Control File System. [ 2.050268] systemd[1]: Mounted Kernel Configuration File System. [ 2.051127] systemd[1]: XXX@XXX: Succeeded. [ 2.051621] systemd[1]: Finished Load Kernel Module drm. [ 2.053838] systemd[1]: Finished Remount Root and Kernel File Systems. [ 2.054919] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 2.054991] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 2.056458] systemd[1]: Starting Load/Save Random Seed... [ 2.058044] systemd[1]: Starting Create System Users... [ 2.061002] systemd[1]: Finished Apply Kernel Variables. [ 2.078542] systemd[1]: Finished Create System Users. [ 2.080275] systemd[1]: Starting Create Static Device Nodes in /dev... [ 2.089811] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0027, bcdDevice= 1.16 [ 2.089816] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.089819] usb 1-2: Product: USB Keyboard [ 2.089821] usb 1-2: Manufacturer: SIGMACHIP [ 2.097288] systemd[1]: Finished Create Static Device Nodes in /dev. [ 2.099677] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 2.112664] systemd[1]: Finished Set the console keyboard layout. [ 2.112860] systemd[1]: Reached target Local File Systems (Pre). [ 2.133082] systemd[1]: Started Journal Service. [ 2.144474] systemd-journald[253]: Received client request to flush runtime journal. [ 2.207835] gpio-phytium PHYT0001:00: Phytium GPIO controller @0x0000000028004000 registered [ 2.208022] gpio-phytium PHYT0001:01: Phytium GPIO controller @0x0000000028005000 registered [ 2.212823] usb 3-1.1: new full-speed USB device number 3 using xhci_hcd [ 2.213257] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.233718] sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 48000000 Hz, action=0. [ 2.233838] sbsa-gwdt sbsa-gwdt.1: Initialized with 10s timeout @ 48000000 Hz, action=0. [ 2.236172] pstore: Using crash dump compression: deflate [ 2.236190] pstore: Registered efi as persistent store backend [ 2.241977] usb 2-1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 2.241984] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.241986] usb 2-1: Product: Ultra [ 2.241988] usb 2-1: Manufacturer: SanDisk [ 2.241990] usb 2-1: SerialNumber: ... [ 2.329059] usb 3-1.1: New USB device found, idVendor=222a, idProduct=0001, bcdDevice= 0.02 [ 2.329063] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.329065] usb 3-1.1: Product: ILITEK-TP [ 2.329068] usb 3-1.1: Manufacturer: ILITEK [ 2.335358] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.335772] cfg80211: Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 2.336028] cfg80211: Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 2.336272] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.337234] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 2.337464] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 2.347787] cryptd: max_cpu_qlen set to 1000 [ 2.348980] Adding 999420k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:999420k SSFS [ 2.378181] PCI Interrupt Link [LNKB] enabled at IRQ 61 [ 2.378342] snd_hda_intel 0000:04:00.1: enabling device (0000 -> 0002) [ 2.378351] snd_hda_intel 0000:04:00.1: Force to snoop mode by module option [ 2.398691] rtw_8822ce 0000:06:00.0: enabling device (0000 -> 0003) [ 2.403638] rtw_8822ce 0000:06:00.0: firmware: direct-loading firmware rtw88/rtw8822c_fw.bin [ 2.403655] rtw_8822ce 0000:06:00.0: Firmware version 9.9.10, H2C version 15 [ 2.403755] rtw_8822ce 0000:06:00.0: firmware: direct-loading firmware rtw88/rtw8822c_wow_fw.bin [ 2.403761] rtw_8822ce 0000:06:00.0: Firmware version 9.9.4, H2C version 15 [ 2.405726] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:04:00.1/sound/card0/input0 [ 2.456824] usb 3-1.2: new high-speed USB device number 4 using xhci_hcd [ 2.466806] rtw_8822ce 0000:06:00.0 wlp6s0: renamed from wlan0 [ 2.484674] [drm] amdgpu kernel modesetting enabled. [ 2.484916] checking generic (1000000000 7e9000) vs hw (1000000000 10000000) [ 2.484919] fb0: switching to amdgpudrmfb from EFI VGA [ 2.485284] Console: switching to colour dummy device 80x25 [ 2.485477] amdgpu 0000:04:00.0: enabling device (0006 -> 0007) [ 2.485485] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x6987 0x17AA:0x380E 0xC0). [ 2.485489] amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 2.485506] [drm] register mmio base: 0x58200000 [ 2.485508] [drm] register mmio size: 262144 [ 2.485512] [drm] PCIE atomic ops is not supported [ 2.485517] [drm] add ip block number 0 <vi_common> [ 2.485519] [drm] add ip block number 1 <gmc_v8_0> [ 2.485521] [drm] add ip block number 2 <tonga_ih> [ 2.485522] [drm] add ip block number 3 <gfx_v8_0> [ 2.485524] [drm] add ip block number 4 <sdma_v3_0> [ 2.485526] [drm] add ip block number 5 <powerplay> [ 2.485528] [drm] add ip block number 6 <dm> [ 2.485530] [drm] add ip block number 7 <uvd_v6_0> [ 2.485531] [drm] add ip block number 8 <vce_v3_0> [ 2.485579] amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from VFCT [ 2.485584] amdgpu: ATOM BIOS: GWRX640XT.002F [ 2.485614] [drm] UVD is enabled in VM mode [ 2.485616] [drm] UVD ENC is enabled in VM mode [ 2.485619] [drm] VCE enabled in VM mode [ 2.485661] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 2.486294] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_k_mc.bin [ 2.486314] amdgpu 0000:04:00.0: BAR 2: releasing [mem 0x1010000000-0x10101fffff 64bit pref] [ 2.486317] amdgpu 0000:04:00.0: BAR 0: releasing [mem 0x1000000000-0x100fffffff 64bit pref] [ 2.486336] pcieport 0000:00:03.0: BAR 15: releasing [mem 0x1000000000-0x1017ffffff 64bit pref] [ 2.486348] pcieport 0000:00:03.0: BAR 15: assigned [mem 0x1040000000-0x10ffffffff 64bit pref] [ 2.486351] amdgpu 0000:04:00.0: BAR 0: assigned [mem 0x1080000000-0x10ffffffff 64bit pref] [ 2.486360] amdgpu 0000:04:00.0: BAR 2: assigned [mem 0x1040000000-0x10401fffff 64bit pref] [ 2.486368] pcieport 0000:00:03.0: PCI bridge to [bus 04] [ 2.486371] pcieport 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 2.486374] pcieport 0000:00:03.0: bridge window [mem 0x58200000-0x582fffff] [ 2.486377] pcieport 0000:00:03.0: bridge window [mem 0x1040000000-0x10ffffffff 64bit pref] [ 2.486386] amdgpu 0000:04:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 2.486389] amdgpu 0000:04:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 2.486394] [drm] Detected VRAM RAM=2048M, BAR=2048M [ 2.486396] [drm] RAM width 64bits GDDR5 [ 2.505015] [TTM] Zone kernel: Available graphics memory: 3986418 KiB [ 2.505019] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 2.505021] [TTM] Initializing pool allocator [ 2.505030] [TTM] Initializing DMA pool allocator [ 2.505098] [drm] amdgpu: 2048M of VRAM memory ready [ 2.505106] [drm] amdgpu: 3072M of GTT memory ready. [ 2.505110] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 2.506340] [drm] PCIE GART of 256M enabled (table at 0x000000F4007E9000). [ 2.509331] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_pfp_2.bin [ 2.509604] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_me_2.bin [ 2.509793] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_ce_2.bin [ 2.509798] [drm] Chained IB support enabled! [ 2.509992] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_rlc.bin [ 2.510743] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_mec_2.bin [ 2.511419] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_mec2_2.bin [ 2.517072] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_sdma.bin [ 2.517402] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_sdma1.bin [ 2.517571] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 2.518481] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_uvd.bin [ 2.518491] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 2.527390] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_vce.bin [ 2.527400] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 2.529849] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/polaris12_k_smc.bin [ 2.612760] [drm] Display Core initialized with v3.2.104! [ 2.629096] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 2.648721] usb 3-1.2: New USB device found, idVendor=0c45, idProduct=6808, bcdDevice= 0.11 [ 2.648727] usb 3-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.648729] usb 3-1.2: Product: USB2.0 Camera [ 2.648731] usb 3-1.2: Manufacturer: USB2.0 Camera [ 2.648733] usb 3-1.2: SerialNumber: ... [ 2.709982] [drm] UVD and UVD ENC initialized successfully. [ 2.732812] usb 3-1.3: new full-speed USB device number 5 using xhci_hcd [ 2.810923] [drm] VCE initialized successfully. [ 2.810937] amdgpu 0000:04:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 10 [ 2.812676] [drm] fb mappable at 0x1080D19000 [ 2.812679] [drm] vram apper at 0x1080000000 [ 2.812682] [drm] size 8294400 [ 2.812684] [drm] fb depth is 24 [ 2.812685] [drm] pitch is 7680 [ 2.842501] usb 3-1.3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 2.842505] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.842507] usb 3-1.3: Product: Bluetooth Radio [ 2.842508] usb 3-1.3: Manufacturer: Realtek [ 2.842510] usb 3-1.3: SerialNumber: ... [ 2.850753] hid: raw HID events driver (C) Jiri Kosina [ 2.863617] Console: switching to colour frame buffer device 240x67 [ 2.866552] usbcore: registered new interface driver usbhid [ 2.866554] usbhid: USB HID core driver [ 2.910144] amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 2.936981] [drm] Initialized amdgpu 3.40.0 20150101 for 0000:04:00.0 on minor 0 [ 2.947555] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 3.154813] stmmaceth PHYT0004:00: Failed to reset the dma [ 3.160297] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 3.169001] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 3.983972] mc: Linux media interface: v0.10 [ 3.985053] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:02.0/0000:03:00.0/usb1/1-2/1-2:1.0/0003:1C4F:0027.0001/input/input1 [ 3.991139] videodev: Linux video capture interface: v2.00 [ 4.000725] uvcvideo: Found UVC 1.00 device USB2.0 Camera (0c45:6808) [ 4.001240] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 4.015097] SCSI subsystem initialized [ 4.017244] input: USB2.0 Camera: USB2.0 Camera as /devices/pci0000:00/0000:00:04.0/0000:05:00.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input2 [ 4.018321] usb-storage 2-1:1.0: USB Mass Storage device detected [ 4.018568] scsi host0: usb-storage 2-1:1.0 [ 4.018777] usbcore: registered new interface driver usb-storage [ 4.020455] usbcore: registered new interface driver uas [ 4.049096] hid-generic 0003:1C4F:0027.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:03:00.0-2/input0 [ 4.049181] usbcore: registered new interface driver uvcvideo [ 4.049185] USB Video Class driver (1.1.1) [ 4.049581] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:02.0/0000:03:00.0/usb1/1-2/1-2:1.1/0003:1C4F:0027.0002/input/input3 [ 4.062057] Bluetooth: Core ver 2.22 [ 4.062114] NET: Registered protocol family 31 [ 4.062117] Bluetooth: HCI device and connection manager initialized [ 4.062128] Bluetooth: HCI socket layer initialized [ 4.062132] Bluetooth: L2CAP socket layer initialized [ 4.062139] Bluetooth: SCO socket layer initialized [ 4.068519] usbcore: registered new interface driver btusb [ 4.107762] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.107767] Bluetooth: BNEP filters: protocol multicast [ 4.107776] Bluetooth: BNEP socket layer initialized [ 4.108044] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 4.109766] rtw_8822ce 0000:06:00.0: stop vif XXX on port 0 [ 4.113008] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:02.0/0000:03:00.0/usb1/1-2/1-2:1.1/0003:1C4F:0027.0002/input/input4 [ 4.113129] hid-generic 0003:1C4F:0027.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:03:00.0-2/input1 [ 4.113888] input: ILITEK ILITEK-TP Touchscreen as /devices/pci0000:00/0000:00:04.0/0000:05:00.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:222A:0001.0003/input/input5 [ 4.173134] hid-generic 0003:222A:0001.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [ILITEK ILITEK-TP] on usb-0000:05:00.0-1.1/input0 [ 4.176809] random: crng init done [ 4.176814] random: 7 urandom warning(s) missed due to ratelimiting [ 4.210949] NET: Registered protocol family 38 [ 4.241888] input: ILITEK ILITEK-TP as /devices/pci0000:00/0000:00:04.0/0000:05:00.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:222A:0001.0003/input/input7 [ 4.305085] hid-multitouch 0003:222A:0001.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [ILITEK ILITEK-TP] on usb-0000:05:00.0-1.1/input0 [ 4.330987] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 4.346655] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 4.554870] stmmaceth PHYT0004:00: Failed to reset the dma [ 4.560360] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 4.569062] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 4.584195] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 4.621791] Bluetooth: RFCOMM TTY layer initialized [ 4.621805] Bluetooth: RFCOMM socket layer initialized [ 4.621817] Bluetooth: RFCOMM ver 1.11 [ 4.802811] stmmaceth PHYT0004:00: Failed to reset the dma [ 4.808297] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 4.816993] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 5.025953] scsi 0:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6 [ 5.031131] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.033917] sd 0:0:0:0: [sda] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 5.034700] sd 0:0:0:0: [sda] Write Protect is off [ 5.034704] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 5.035235] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.057062] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 5.092921] sda: sda1 sda2 [ 5.130241] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.260827] stmmaceth PHYT0004:00: Failed to reset the dma [ 5.266318] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 5.275046] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 5.290197] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 5.498852] stmmaceth PHYT0004:00: Failed to reset the dma [ 5.504337] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 5.513034] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 115.476842] usb 2-1: USB disconnect, device number 2 [ 124.576789] usb 1-1: new full-speed USB device number 4 using xhci_hcd [ 124.821763] usb 1-1: New USB device found, idVendor=25a7, idProduct=fa61, bcdDevice= 6.20 [ 124.821767] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 124.821770] usb 1-1: Product: 2.4G Receiver [ 124.821772] usb 1-1: Manufacturer: Compx [ 124.828810] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:02.0/0000:03:00.0/usb1/1-1/1-1:1.0/0003:25A7:FA61.0004/input/input9 [ 124.889019] hid-generic 0003:25A7:FA61.0004: input,hidraw3: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:03:00.0-1/input0 [ 124.892429] input: Compx 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:02.0/0000:03:00.0/usb1/1-1/1-1:1.1/0003:25A7:FA61.0005/input/input10 [ 124.892566] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:02.0/0000:03:00.0/usb1/1-1/1-1:1.1/0003:25A7:FA61.0005/input/input11 [ 124.892660] input: Compx 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:02.0/0000:03:00.0/usb1/1-1/1-1:1.1/0003:25A7:FA61.0005/input/input12 [ 124.948886] input: Compx 2.4G Receiver System Control as /devices/pci0000:00/0000:00:02.0/0000:03:00.0/usb1/1-1/1-1:1.1/0003:25A7:FA61.0005/input/input13 [ 124.949023] hid-generic 0003:25A7:FA61.0005: input,hiddev1,hidraw4: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:03:00.0-1/input1 [ 306.138927] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 306.348879] stmmaceth PHYT0004:00: Failed to reset the dma [ 306.354363] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 306.363056] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 306.377058] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 306.582871] stmmaceth PHYT0004:00: Failed to reset the dma [ 306.588354] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 306.597048] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 306.612434] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 306.816877] stmmaceth PHYT0004:00: Failed to reset the dma [ 306.822361] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 306.831054] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 306.845702] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 307.052871] stmmaceth PHYT0004:00: Failed to reset the dma [ 307.058357] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 307.067054] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 417.233584] rtw_8822ce 0000:06:00.0: stop vif XXX on port 0 [ 417.455922] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 607.140328] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 607.341259] stmmaceth PHYT0004:00: Failed to reset the dma [ 607.346742] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 607.355435] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 607.369446] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 607.578655] stmmaceth PHYT0004:00: Failed to reset the dma [ 607.584141] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 607.592838] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 607.608376] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 607.810823] stmmaceth PHYT0004:00: Failed to reset the dma [ 607.816308] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 607.825003] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 607.839684] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 608.044880] stmmaceth PHYT0004:00: Failed to reset the dma [ 608.050363] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 608.059057] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 833.233507] rtw_8822ce 0000:06:00.0: stop vif XXX on port 0 [ 833.455931] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 908.140097] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 908.351516] stmmaceth PHYT0004:00: Failed to reset the dma [ 908.357005] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 908.365704] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 908.379947] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 908.586814] stmmaceth PHYT0004:00: Failed to reset the dma [ 908.592299] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 908.600998] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 908.616304] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 908.824917] stmmaceth PHYT0004:00: Failed to reset the dma [ 908.830403] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 908.839100] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 908.853531] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 909.056885] stmmaceth PHYT0004:00: Failed to reset the dma [ 909.062370] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 909.071067] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1209.142727] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1209.350654] stmmaceth PHYT0004:00: Failed to reset the dma [ 1209.356139] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1209.364837] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1209.379233] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1209.582896] stmmaceth PHYT0004:00: Failed to reset the dma [ 1209.588388] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1209.597089] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1209.612629] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1209.816839] stmmaceth PHYT0004:00: Failed to reset the dma [ 1209.822325] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1209.831022] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1209.845863] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1210.050848] stmmaceth PHYT0004:00: Failed to reset the dma [ 1210.056335] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1210.065031] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1249.172979] rtw_8822ce 0000:06:00.0: stop vif XXX on port 0 [ 1249.395926] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 1510.143244] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1510.344216] stmmaceth PHYT0004:00: Failed to reset the dma [ 1510.349700] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1510.358397] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1510.372636] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1510.574874] stmmaceth PHYT0004:00: Failed to reset the dma [ 1510.580359] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1510.589060] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1510.604566] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1510.812878] stmmaceth PHYT0004:00: Failed to reset the dma [ 1510.818362] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1510.827056] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1510.841532] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1511.042835] stmmaceth PHYT0004:00: Failed to reset the dma [ 1511.048328] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1511.057028] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1665.233070] rtw_8822ce 0000:06:00.0: stop vif XXX on port 0 [ 1665.455945] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 1811.142795] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1811.350894] stmmaceth PHYT0004:00: Failed to reset the dma [ 1811.356377] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1811.365071] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1811.379356] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1811.584908] stmmaceth PHYT0004:00: Failed to reset the dma [ 1811.590390] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1811.599083] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1811.614590] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1811.818773] stmmaceth PHYT0004:00: Failed to reset the dma [ 1811.824261] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1811.832959] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 1811.848031] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 1812.056888] stmmaceth PHYT0004:00: Failed to reset the dma [ 1812.062374] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 1812.071070] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2081.233474] rtw_8822ce 0000:06:00.0: stop vif XXX on port 0 [ 2081.455929] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 2112.136709] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 2112.342877] stmmaceth PHYT0004:00: Failed to reset the dma [ 2112.348361] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 2112.357054] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2112.371241] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 2112.572811] stmmaceth PHYT0004:00: Failed to reset the dma [ 2112.578294] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 2112.586986] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2112.602446] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 2112.808814] stmmaceth PHYT0004:00: Failed to reset the dma [ 2112.814308] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 2112.823008] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2112.837837] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 2113.044896] stmmaceth PHYT0004:00: Failed to reset the dma [ 2113.050383] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 2113.059079] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2386.160526] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 2398.264313] rtw_8822ce 0000:06:00.0: stop vif XXX on port 0 [ 2398.487947] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 2410.844604] rtw_8822ce 0000:06:00.0: stop vif XXX on port 0 [ 2411.067951] rtw_8822ce 0000:06:00.0: start vif XXX on port 0 [ 2413.138184] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 2413.339176] stmmaceth PHYT0004:00: Failed to reset the dma [ 2413.344659] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 2413.353356] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2413.368359] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 2413.575143] stmmaceth PHYT0004:00: Failed to reset the dma [ 2413.580625] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 2413.589324] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2413.603533] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 2413.804913] stmmaceth PHYT0004:00: Failed to reset the dma [ 2413.810396] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 2413.819095] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2413.833405] stmmaceth PHYT0004:00 enaphyt4i0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL) [ 2414.042903] stmmaceth PHYT0004:00: Failed to reset the dma [ 2414.048389] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_hw_setup: DMA engine initialization failed [ 2414.057088] stmmaceth PHYT0004:00 enaphyt4i0: stmmac_open: Hw setup failed [ 2414.598084] wlp6s0: authenticate with XXX [ 2415.086338] wlp6s0: send auth to XXX (try 1/3) [ 2415.089685] wlp6s0: authenticated [ 2415.096810] wlp6s0: associate with XXX (try 1/3) [ 2415.200808] wlp6s0: associate with XXX (try 2/3) [ 2415.288880] wlp6s0: RX AssocResp from XXX (capab=0x1501 status=0 aid=1) [ 2415.288906] rtw_8822ce 0000:06:00.0: sta XXX joined with macid 0 [ 2415.289185] wlp6s0: associated [ 2415.289715] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready [ 2415.340872] wlp6s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX