[ 0.000000] Linux version 4.9.76-nrj-desktop-1rosa-x86_64 (XXX@XXX) (gcc version 5.4.1 20170404 (ROSA) (Linaro GCC 5.4-2017.05) ) #1 SMP PREEMPT Sat Jan 13 11:30:11 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.76-nrj-desktop-1rosa-x86_64 root=UUID=HASH_5DA-3C13-D726-9E4D-7A9CEFEB74D7 ro splash=silent logo.nologo quiet resume=UUID=HASH_2CA-D525-EA1E-3CFF-DF90DD91707C [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffbffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffc0000-0x00000000bffcdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bffce000-0x00000000bffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/M2N, BIOS 0803 09/13/2007 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbffc0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x0bfbe000, 0x0bfbefff] PGTABLE [ 0.000000] BRK [0x0bfbf000, 0x0bfbffff] PGTABLE [ 0.000000] BRK [0x0bfc0000, 0x0bfc0fff] PGTABLE [ 0.000000] BRK [0x0bfc1000, 0x0bfc1fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31c32000-0x34e10fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB810 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000BFFC0000 00003C (v01 A_M_I_ OEMRSDT 09000713 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000BFFC0200 000084 (v02 A_M_I_ OEMFACP 09000713 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000BFFC0440 005288 (v01 A0626 A0626000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 0x00000000BFFCE000 000040 [ 0.000000] ACPI: APIC 0x00000000BFFC0390 000070 (v01 A_M_I_ OEMAPIC 09000713 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000BFFC0400 00003C (v01 A_M_I_ OEMMCFG 09000713 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000BFFCE040 000060 (v01 A_M_I_ AMI_OEM 09000713 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BFFC56D0 000038 (v01 A_M_I_ OEMHPET0 09000713 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000BFFC5710 0002CC (v01 A_M_I_ POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bffbffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1048414 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12223 pages used for memmap [ 0.000000] DMA32 zone: 782272 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffc0000-0xbffcdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffce000-0xbffeffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xff77ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff780000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff88013fc00000 s108888 r8192 d30376 u1048576 [ 0.000000] pcpu-alloc: s108888 r8192 d30376 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032010 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.76-nrj-desktop-1rosa-x86_64 root=UUID=HASH_5DA-3C13-D726-9E4D-7A9CEFEB74D7 ro splash=silent logo.nologo quiet resume=UUID=HASH_2CA-D525-EA1E-3CFF-DF90DD91707C [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB) [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] [ 0.000000] Memory: 3928960K/4193656K available (8118K kernel code, 1380K rwdata, 3684K rodata, 1456K init, 948K bss, 264696K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 [ 0.000000] NR_IRQS:4352 nr_irqs:440 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2812.569 MHz processor [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized [ 0.001014] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.13 BogoMIPS (lpj=2812569) [ 0.001018] pid_max: default: 32768 minimum: 301 [ 0.001028] ACPI: Core revision 20160831 [ 0.005113] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.005143] Security Framework initialized [ 0.005145] SELinux: Disabled at boot. [ 0.005410] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008135] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009570] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.009575] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010015] CPU: Physical Processor ID: 0 [ 0.010016] CPU: Processor Core ID: 0 [ 0.010018] mce: CPU supports 5 MCE banks [ 0.010025] LVT offset 0 assigned for vector 0xf9 [ 0.010029] process: using AMD E400 aware idle routine [ 0.010031] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.010032] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 [ 0.010327] Freeing SMP alternatives memory: 32K [ 0.011355] ftrace: allocating 31018 entries in 122 pages [ 0.020206] smpboot: Max logical packages: 1 [ 0.021210] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.022000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.022000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.022000] ..... (found apic 0 pin 0) ... [ 0.032267] ....... works. [ 0.033000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (family: 0xf, model: 0x43, stepping: 0x3) [ 0.033000] Performance Events: AMD PMU driver. [ 0.033000] ... version: 0 [ 0.033000] ... bit width: 48 [ 0.033000] ... generic registers: 4 [ 0.033000] ... value mask: 0000ffffffffffff [ 0.033000] ... max period: 00007fffffffffff [ 0.033000] ... fixed-purpose events: 0 [ 0.033000] ... event mask: 000000000000000f [ 0.040368] MCE: In-kernel MCE decoding enabled. [ 0.049019] x86: Booting SMP configuration: [ 0.049020] .... node #0, CPUs: #1 [ 0.109037] x86: Booted up 1 node, 2 CPUs [ 0.109037] smpboot: Total of 2 processors activated (11250.28 BogoMIPS) [ 0.110046] devtmpfs: initialized [ 0.110087] x86/mm: Memory block size: 128MB [ 0.114296] PM: Registering ACPI NVS region [mem 0xbffce000-0xbffeffff] (139264 bytes) [ 0.114296] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.114296] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.114395] xor: measuring software checksum speed [ 0.123982] prefetch64-sse: 9392.000 MB/sec [ 0.133982] generic_sse: 9380.000 MB/sec [ 0.133983] xor: using function: prefetch64-sse (9392.000 MB/sec) [ 0.133986] pinctrl core: initialized pinctrl subsystem [ 0.134055] RTC time: 9:13:10, date: 02/13/18 [ 0.134163] NET: Registered protocol family 16 [ 0.137004] cpuidle: using governor ladder [ 0.140003] cpuidle: using governor menu [ 0.140006] node 0 link 0: io port [1000, ffffff] [ 0.140008] TOM: 00000000c0000000 aka 3072M [ 0.140010] node 0 link 0: mmio [e0000000, efffffff] [ 0.140012] node 0 link 0: mmio [a0000, bffff] [ 0.140014] node 0 link 0: mmio [c0000000, fe0bffff] [ 0.140015] TOM2: 0000000140000000 aka 5120M [ 0.140017] bus: [bus 00-ff] on node 0 link 0 [ 0.140018] bus: 00 [io 0x0000-0xffff] [ 0.140019] bus: 00 [mem 0xc0000000-0xffffffff] [ 0.140020] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.140020] bus: 00 [mem 0x140000000-0xfcffffffff] [ 0.140059] ACPI: bus type PCI registered [ 0.140060] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.140122] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.140124] PCI: not using MMCONFIG [ 0.140125] PCI: Using configuration type 1 for base access [ 0.140162] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.140162] mtrr: probably your BIOS does not setup all CPUs. [ 0.140162] mtrr: corrected configuration. [ 0.144038] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.161018] raid6: sse2x1 gen() 3410 MB/s [ 0.178007] raid6: sse2x1 xor() 3253 MB/s [ 0.195002] raid6: sse2x2 gen() 4667 MB/s [ 0.212001] raid6: sse2x2 xor() 3652 MB/s [ 0.229020] raid6: sse2x4 gen() 4796 MB/s [ 0.246005] raid6: sse2x4 xor() 2591 MB/s [ 0.246006] raid6: using algorithm sse2x4 gen() 4796 MB/s [ 0.246007] raid6: .... xor() 2591 MB/s, rmw enabled [ 0.246008] raid6: using intx1 recovery algorithm [ 0.246082] ACPI: Added _OSI(Module Device) [ 0.246083] ACPI: Added _OSI(Processor Device) [ 0.246084] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.246085] ACPI: Added _OSI(Processor Aggregator Device) [ 0.246355] ACPI: Executed 1 blocks of module-level executable AML code [ 0.248782] ACPI: Interpreter enabled [ 0.248803] ACPI: (supports S0 S1 S3 S4 S5) [ 0.248804] ACPI: Using IOAPIC for interrupt routing [ 0.248833] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.249885] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.249899] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.255187] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.255193] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.255197] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.255364] PCI host bridge to bus 0000:00 [ 0.255366] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.255368] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.255370] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.255371] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.255373] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xff77ffff window] [ 0.255375] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.255393] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000 [ 0.255593] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100 [ 0.255600] pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff] [ 0.255679] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500 [ 0.255687] pci 0000:00:01.1: reg 0x10: [io 0xdc00-0xdc3f] [ 0.255701] pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f] [ 0.255705] pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f] [ 0.255729] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.255761] pci 0000:00:01.1: System wakeup disabled by ACPI [ 0.255796] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000 [ 0.255871] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310 [ 0.255878] pci 0000:00:02.0: reg 0x10: [mem 0xdbfff000-0xdbffffff] [ 0.255909] pci 0000:00:02.0: supports D1 D2 [ 0.255910] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.255937] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.255973] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320 [ 0.255981] pci 0000:00:02.1: reg 0x10: [mem 0xdbffec00-0xdbffecff] [ 0.256019] pci 0000:00:02.1: supports D1 D2 [ 0.256020] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.256048] pci 0000:00:02.1: System wakeup disabled by ACPI [ 0.256091] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401 [ 0.256139] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.256176] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300 [ 0.256185] pci 0000:00:05.0: reg 0x10: [mem 0xdbff8000-0xdbffbfff] [ 0.256221] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.256248] pci 0000:00:05.0: System wakeup disabled by ACPI [ 0.256291] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a [ 0.256309] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf] [ 0.256318] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.256320] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.256321] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.256322] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.256387] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000 [ 0.256394] pci 0000:00:07.0: reg 0x10: [mem 0xdbffd000-0xdbffdfff] [ 0.256397] pci 0000:00:07.0: reg 0x14: [io 0xd480-0xd487] [ 0.256425] pci 0000:00:07.0: supports D1 D2 [ 0.256427] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.256458] pci 0000:00:07.0: System wakeup disabled by ACPI [ 0.256492] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185 [ 0.256498] pci 0000:00:08.0: reg 0x10: [io 0xd400-0xd407] [ 0.256502] pci 0000:00:08.0: reg 0x14: [io 0xd080-0xd083] [ 0.256505] pci 0000:00:08.0: reg 0x18: [io 0xd000-0xd007] [ 0.256509] pci 0000:00:08.0: reg 0x1c: [io 0xcc00-0xcc03] [ 0.256512] pci 0000:00:08.0: reg 0x20: [io 0xc880-0xc88f] [ 0.256516] pci 0000:00:08.0: reg 0x24: [mem 0xdbffc000-0xdbffcfff] [ 0.256583] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185 [ 0.256589] pci 0000:00:08.1: reg 0x10: [io 0xc800-0xc807] [ 0.256592] pci 0000:00:08.1: reg 0x14: [io 0xc480-0xc483] [ 0.256596] pci 0000:00:08.1: reg 0x18: [io 0xc400-0xc407] [ 0.256599] pci 0000:00:08.1: reg 0x1c: [io 0xc080-0xc083] [ 0.256602] pci 0000:00:08.1: reg 0x20: [io 0xc000-0xc00f] [ 0.256606] pci 0000:00:08.1: reg 0x24: [mem 0xdbff3000-0xdbff3fff] [ 0.256680] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400 [ 0.256705] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.256733] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.256769] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400 [ 0.256791] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.256818] pci 0000:00:0b.0: System wakeup disabled by ACPI [ 0.256856] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400 [ 0.256877] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.256904] pci 0000:00:0c.0: System wakeup disabled by ACPI [ 0.256947] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 [ 0.257008] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 [ 0.257064] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 [ 0.257118] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 [ 0.257227] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode) [ 0.257232] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.257234] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.257235] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.257237] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.257238] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xff77ffff window] (subtractive decode) [ 0.257270] pci 0000:02:00.0: [10de:0402] type 00 class 0x030000 [ 0.257279] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff] [ 0.257286] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.257294] pci 0000:02:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit] [ 0.257299] pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f] [ 0.257304] pci 0000:02:00.0: reg 0x30: [mem 0xdefe0000-0xdeffffff pref] [ 0.260014] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.260016] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.260018] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff] [ 0.260021] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.260048] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.260075] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.260967] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.261046] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.261120] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.261194] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.261268] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.261342] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.261416] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.261490] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11 [ 0.261565] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11 [ 0.261639] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10 [ 0.261713] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.261787] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.261861] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 0.261936] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 0.262014] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.262089] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.262163] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15 [ 0.262239] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5 [ 0.262323] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.262474] vgaarb: setting as boot device: PCI:0000:02:00.0 [ 0.262474] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.262474] vgaarb: loaded [ 0.262474] vgaarb: bridge control possible 0000:02:00.0 [ 0.262474] SCSI subsystem initialized [ 0.262474] libata version 3.00 loaded. [ 0.262474] ACPI: bus type USB registered [ 0.262474] usbcore: registered new interface driver usbfs [ 0.262474] usbcore: registered new interface driver hub [ 0.262474] usbcore: registered new device driver usb [ 0.262474] PCI: Using ACPI for IRQ routing [ 0.268748] PCI: pci_cache_line_size set to 64 bytes [ 0.268777] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.268779] e820: reserve RAM buffer [mem 0xbffc0000-0xbfffffff] [ 0.268891] NetLabel: Initializing [ 0.268891] NetLabel: domain hash size = 128 [ 0.268892] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.268910] NetLabel: unlabeled traffic allowed by default [ 0.269006] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.269011] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.269014] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.273031] clocksource: Switched to clocksource hpet [ 0.284730] VFS: Disk quotas dquot_6.6.0 [ 0.284760] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.284882] pnp: PnP ACPI init [ 0.284966] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.285429] pnp 00:01: [dma 2] [ 0.285471] pnp 00:01: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.285965] pnp 00:02: [dma 0 disabled] [ 0.286153] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.286494] pnp 00:03: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff] [ 0.286495] pnp 00:03: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff] [ 0.286578] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.286580] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.286581] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.286583] system 00:03: [io 0x0580-0x05ff] has been reserved [ 0.286585] system 00:03: [io 0x0800-0x087f] could not be reserved [ 0.286586] system 00:03: [io 0x0880-0x08ff] has been reserved [ 0.286588] system 00:03: [io 0x0d00-0x0d7f] has been reserved [ 0.286589] system 00:03: [io 0x0d80-0x0dff] has been reserved [ 0.286591] system 00:03: [io 0x2000-0x207f] has been reserved [ 0.286592] system 00:03: [io 0x2080-0x20ff] has been reserved [ 0.286594] system 00:03: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.286596] system 00:03: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.286598] system 00:03: [mem 0x000de000-0x000dffff window] has been reserved [ 0.286599] system 00:03: [mem 0xfefe0000-0xfefe01ff] has been reserved [ 0.286601] system 00:03: [mem 0xfefe1000-0xfefe1fff] has been reserved [ 0.286603] system 00:03: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.286604] system 00:03: [mem 0xffb80000-0xffffffff] has been reserved [ 0.286606] system 00:03: [mem 0xff300000-0xff3fffff] has been reserved [ 0.286609] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.286722] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.286724] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.286726] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.286774] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.286944] system 00:06: [io 0x0230-0x023f] has been reserved [ 0.286946] system 00:06: [io 0x0290-0x029f] has been reserved [ 0.286947] system 00:06: [io 0x0a00-0x0a0f] has been reserved [ 0.286949] system 00:06: [io 0x0a10-0x0a1f] has been reserved [ 0.286951] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.287328] pnp 00:07: [dma 0 disabled] [ 0.287380] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.287442] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.287445] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.287580] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.287582] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.287583] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.287585] system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.287587] system 00:09: [mem 0xff780000-0xffffffff] could not be reserved [ 0.287589] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.287844] pnp: PnP ACPI: found 10 devices [ 0.294877] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.294897] pci 0000:00:04.0: PCI bridge to [bus 01] [ 0.294904] pci 0000:00:09.0: PCI bridge to [bus 02] [ 0.294906] pci 0000:00:09.0: bridge window [io 0xe000-0xefff] [ 0.294908] pci 0000:00:09.0: bridge window [mem 0xdc000000-0xdfffffff] [ 0.294910] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.294913] pci 0000:00:0b.0: PCI bridge to [bus 03] [ 0.294917] pci 0000:00:0c.0: PCI bridge to [bus 04] [ 0.294922] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.294923] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.294925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.294926] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.294928] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xff77ffff window] [ 0.294930] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] [ 0.294931] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] [ 0.294933] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.294934] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.294936] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xff77ffff window] [ 0.294937] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.294939] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdfffffff] [ 0.294940] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.295014] NET: Registered protocol family 2 [ 0.295215] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.295387] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.295668] TCP: Hash tables configured (established 32768 bind 32768) [ 0.295746] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.295790] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.295902] NET: Registered protocol family 1 [ 0.296201] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.872227] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.872334] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.872375] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.872423] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.872470] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.872516] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.872564] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.872615] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.872667] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.872687] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.872689] PCI: CLS 64 bytes, default 64 [ 0.872764] Trying to unpack rootfs image as initramfs... [ 1.566569] Freeing initrd memory: 51068K [ 1.566777] PCI-DMA: Disabling AGP. [ 1.566886] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 1.566887] PCI-DMA: using GART IOMMU. [ 1.566890] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.570056] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x288aa23c919, max_idle_ns: 440795270943 ns [ 1.570864] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 1.572861] zbud: loaded [ 1.574932] Key type asymmetric registered [ 1.575021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.575065] io scheduler noop registered [ 1.575066] io scheduler deadline registered [ 1.575078] io scheduler cfq registered [ 1.575115] io scheduler bfq registered (default) [ 1.575116] BFQ I/O-scheduler: v8r7 (with cgroups support) [ 1.575443] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.575449] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.575494] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.575495] vesafb: scrolling: redraw [ 1.575496] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.575513] vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90000c00000, using 3072k, total 3072k [ 1.583457] Console: switching to colour frame buffer device 128x48 [ 1.591229] fb0: VESA VGA frame buffer device [ 1.591324] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.591327] ACPI: Power Button [PWRB] [ 1.591371] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.591372] ACPI: Power Button [PWRF] [ 1.591591] GHES: HEST is not enabled! [ 1.591667] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.612268] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.612706] Linux agpgart interface v0.103 [ 1.615666] brd: module loaded [ 1.615932] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.615933] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.616102] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.616215] mousedev: PS/2 mouse device common for all mice [ 1.616368] rtc_cmos 00:00: RTC can wake from S4 [ 1.616526] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.616567] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.616626] device-mapper: uevent: version 1.0.3 [ 1.616697] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: XXX@XXX [ 1.616722] ledtrig-cpu: registered to indicate activity on CPUs [ 1.616846] Key type dns_resolver registered [ 1.616847] mpls_gso: MPLS GSO support [ 1.616995] microcode: AMD CPU family 0xf not supported [ 1.617159] registered taskstats version 1 [ 1.617187] zswap: loaded using pool lzo/zbud [ 1.617677] Btrfs loaded, crc32c=crc32c-generic [ 1.622261] Key type encrypted registered [ 1.622266] ima: No TPM chip found, activating TPM-bypass! [ 1.622530] Magic number: 6:73:222 [ 1.622651] rtc_cmos 00:00: setting system clock to 2018-02-13 09:13:12 UTC (1518513192) [ 1.622653] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.622653] EDD information not available. [ 1.622707] PM: Checking hibernation image partition UUID=HASH_2CA-D525-EA1E-3CFF-DF90DD91707C [ 1.654283] PM: Hibernation image not present or could not be loaded. [ 1.656354] Freeing unused kernel memory: 1456K [ 1.656357] Write protecting the kernel read-only data: 12288k [ 1.656560] Freeing unused kernel memory: 60K [ 1.657791] Freeing unused kernel memory: 412K [ 1.684200] NET: Registered protocol family 10 [ 1.685511] random: systemd: uninitialized urandom read (16 bytes read) [ 1.685764] random: systemd: uninitialized urandom read (16 bytes read) [ 1.685779] random: systemd: uninitialized urandom read (16 bytes read) [ 1.687313] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.687448] systemd[1]: Detected architecture x86-64. [ 1.687450] systemd[1]: Running in initial RAM disk. [ 1.687460] systemd[1]: No hostname configured. [ 1.687465] systemd[1]: Set hostname to ... [ 1.687490] random: systemd: uninitialized urandom read (16 bytes read) [ 1.687495] systemd[1]: Initializing machine ID from random generator. [ 1.693106] random: systemd-cryptse: uninitialized urandom read (16 bytes read) [ 1.727499] random: systemd: uninitialized urandom read (16 bytes read) [ 1.727525] random: systemd: uninitialized urandom read (16 bytes read) [ 1.727558] random: systemd: uninitialized urandom read (16 bytes read) [ 1.727621] random: systemd: uninitialized urandom read (16 bytes read) [ 1.728351] random: systemd: uninitialized urandom read (16 bytes read) [ 1.733201] systemd[1]: [/run/systemd/generator/dev-disk-by\x2duuid-....device.d/timeout.conf:3] Unknown lvalue 'JobRunningTimeoutSec' in section 'Unit' [ 1.734072] systemd[1]: Listening on udev Kernel Socket. [ 1.734156] systemd[1]: Listening on udev Control Socket. [ 1.734603] systemd[1]: Created slice System Slice. [ 1.922188] RPC: Registered named UNIX socket transport module. [ 1.922190] RPC: Registered udp transport module. [ 1.922191] RPC: Registered tcp transport module. [ 1.922192] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.130506] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 2.150242] pata_amd 0000:00:06.0: version 0.4.1 [ 2.152089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.155059] scsi host0: pata_amd [ 2.159041] scsi host1: pata_amd [ 2.159123] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.159125] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.159293] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.159523] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 2.185443] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.185446] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 2.192464] ehci-pci: EHCI PCI platform driver [ 2.216378] [drm] Initialized [ 2.241419] wmi: Mapper loaded [ 2.301528] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 [ 2.301630] checking generic (dd000000 300000) vs hw (c0000000 10000000) [ 2.301631] checking generic (dd000000 300000) vs hw (dc000000 2000000) [ 2.301632] fb: switching to nouveaufb from VESA VGA [ 2.301688] Console: switching to colour dummy device 80x25 [ 2.302124] nouveau 0000:02:00.0: NVIDIA G84 (084200a2) [ 2.335893] ata2: port disabled--ignoring [ 2.407793] nouveau 0000:02:00.0: bios: version XXX.XXX.XXX.XXX.08 [ 2.428893] nouveau 0000:02:00.0: fb: 256 MiB GDDR3 [ 2.477233] [TTM] Zone kernel: Available graphics memory: 2023970 kiB [ 2.477234] [TTM] Initializing pool allocator [ 2.477239] [TTM] Initializing DMA pool allocator [ 2.477256] nouveau 0000:02:00.0: DRM: VRAM: 256 MiB [ 2.477257] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB [ 2.477261] nouveau 0000:02:00.0: DRM: TMDS table version 2.0 [ 2.477262] nouveau 0000:02:00.0: DRM: DCB version 4.0 [ 2.477265] nouveau 0000:02:00.0: DRM: DCB outp 00: 02000300 00000028 [ 2.477267] nouveau 0000:02:00.0: DRM: DCB outp 01: 01000302 00000030 [ 2.477268] nouveau 0000:02:00.0: DRM: DCB outp 02: 04011310 00000028 [ 2.477270] nouveau 0000:02:00.0: DRM: DCB outp 03: 02011312 00000030 [ 2.477271] nouveau 0000:02:00.0: DRM: DCB outp 04: 010223f1 00c0c083 [ 2.477273] nouveau 0000:02:00.0: DRM: DCB conn 00: 1030 [ 2.477274] nouveau 0000:02:00.0: DRM: DCB conn 01: 2130 [ 2.477275] nouveau 0000:02:00.0: DRM: DCB conn 02: 0210 [ 2.477276] nouveau 0000:02:00.0: DRM: DCB conn 03: 0211 [ 2.477278] nouveau 0000:02:00.0: DRM: DCB conn 04: 0213 [ 2.477279] nouveau 0000:02:00.0: DRM: DCB conn 05: 0362 [ 2.479278] nouveau 0000:02:00.0: DRM: failed to create encoder 0/1/0: -19 [ 2.479279] nouveau 0000:02:00.0: DRM: TV-1 has no encoders, removing [ 2.479325] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.479326] [drm] Driver supports precise vblank timestamp query. [ 2.487973] nouveau 0000:02:00.0: DRM: MM: using CRYPT for buffer copies [ 2.543867] nouveau 0000:02:00.0: DRM: allocated 1024x768 fb: 0x70000, bo ffff880133abe800 [ 2.543954] fbcon: nouveaufb (fb0) is primary device [ 2.660991] Console: switching to colour frame buffer device 128x48 [ 2.661249] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device [ 2.665025] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0 [ 2.684713] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr XXX [ 2.684716] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 2.685042] sata_nv 0000:00:08.0: version 3.5 [ 2.685258] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20 [ 2.685591] forcedeth 0000:00:07.0 enp0s7: renamed from eth0 [ 2.687244] scsi host2: sata_nv [ 2.688490] scsi host3: sata_nv [ 2.688536] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20 [ 2.688538] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20 [ 2.688784] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23 [ 2.690643] scsi host4: sata_nv [ 2.694409] scsi host5: sata_nv [ 2.694490] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23 [ 2.694492] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23 [ 2.694798] ehci-pci 0000:00:02.1: EHCI Host Controller [ 2.694808] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.694818] ehci-pci 0000:00:02.1: debug port 1 [ 2.694851] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 2.694876] ehci-pci 0000:00:02.1: irq 22, io mem 0xdbffec00 [ 2.701016] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 2.701093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.701095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.701097] usb usb1: Product: EHCI Host Controller [ 2.701098] usb usb1: Manufacturer: Linux 4.9.76-nrj-desktop-1rosa-x86_64 ehci_hcd [ 2.701099] usb usb1: SerialNumber: ... [ 2.701269] hub 1-0:1.0: USB hub found [ 2.701278] hub 1-0:1.0: 10 ports detected [ 2.705484] ohci-pci: OHCI PCI platform driver [ 2.705631] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 2.705639] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.705670] ohci-pci 0000:00:02.0: irq 23, io mem 0xdbfff000 [ 2.759083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.759085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.759086] usb usb2: Product: OHCI PCI host controller [ 2.759088] usb usb2: Manufacturer: Linux 4.9.76-nrj-desktop-1rosa-x86_64 ohci_hcd [ 2.759089] usb usb2: SerialNumber: ... [ 2.759247] hub 2-0:1.0: USB hub found [ 2.759256] hub 2-0:1.0: 10 ports detected [ 3.152039] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.152041] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.154361] ata3.00: ATAPI: Optiarc DVD RW AD-7203S, 1.04, max UDMA/100 [ 3.154589] ata5.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 [ 3.154591] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.158992] ata3.00: configured for UDMA/100 [ 3.159281] ata5.00: configured for UDMA/133 [ 3.161507] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7203S 1.04 PQ: 0 ANSI: 5 [ 3.176844] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.176847] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.176980] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.244022] usb 2-1: new low-speed USB device number 2 using ohci-pci [ 3.444039] usb 2-1: New USB device found, idVendor=1a2c, idProduct=0e24 [ 3.444042] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.444043] usb 2-1: Product: USB Keyboard [ 3.444044] usb 2-1: Manufacturer: SEM [ 3.453120] hidraw: raw HID events driver (C) Jiri Kosina [ 3.469228] usbcore: registered new interface driver usbhid [ 3.469231] usbhid: USB HID core driver [ 3.470630] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:1A2C:0E24.0001/input/input3 [ 3.522129] hid-generic 0003:1A2C:0E24.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:02.0-1/input0 [ 3.525123] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:1A2C:0E24.0002/input/input4 [ 3.577094] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:02.0-1/input1 [ 3.624043] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.626333] ata4.00: ATA-8: WDC WD3200AAJS-65B4A0, 01.03A01, max UDMA/133 [ 3.626337] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.630812] ata4.00: configured for UDMA/133 [ 3.631050] scsi 3:0:0:0: Direct-Access ATA WDC WD3200AAJS-6 3A01 PQ: 0 ANSI: 5 [ 3.645183] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.645274] sd 3:0:0:0: [sda] Write Protect is off [ 3.645277] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.645296] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.645508] scsi 4:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5 [ 3.653781] sda: sda2 [ 3.654107] sd 3:0:0:0: [sda] Attached SCSI disk [ 3.656297] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.656346] sd 4:0:0:0: [sdb] Write Protect is off [ 3.656348] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.656394] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.663398] sdb: sdb1 [ 3.663670] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.738980] random: fast init done [ 3.744022] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 3.865651] usb 1-3: New USB device found, idVendor=0951, idProduct=1653 [ 3.865654] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.865655] usb 1-3: Product: DT 100 G2 [ 3.865656] usb 1-3: Manufacturer: Kingston [ 3.865658] usb 1-3: SerialNumber: ... [ 3.870753] usb-storage 1-3:1.0: USB Mass Storage device detected [ 3.871415] scsi host6: usb-storage 1-3:1.0 [ 3.871502] usbcore: registered new interface driver usb-storage [ 3.872866] usbcore: registered new interface driver uas [ 4.120054] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.122492] ata6.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133 [ 4.122493] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.127104] ata6.00: configured for UDMA/133 [ 4.127362] scsi 5:0:0:0: Direct-Access ATA TOSHIBA HDWD110 A8J0 PQ: 0 ANSI: 5 [ 4.139215] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.139217] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 4.139269] sd 5:0:0:0: [sdc] Write Protect is off [ 4.139271] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.139291] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.183177] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 > sdc3 [ 4.183692] sd 5:0:0:0: [sdc] Attached SCSI disk [ 4.189050] usb 2-4: new full-speed USB device number 3 using ohci-pci [ 4.403754] random: crng init done [ 4.406046] usb 2-4: New USB device found, idVendor=062a, idProduct=3286 [ 4.406049] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.406051] usb 2-4: Product: SVEN RX-310 WIRELESS MOUSE [ 4.415525] input: SVEN RX-310 WIRELESS MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:062A:3286.0003/input/input5 [ 4.467163] hid-generic 0003:062A:3286.0003: input,hidraw2: USB HID v1.10 Keyboard [SVEN RX-310 WIRELESS MOUSE] on usb-0000:00:02.0-4/input0 [ 4.474056] input: SVEN RX-310 WIRELESS MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:062A:3286.0004/input/input6 [ 4.526285] hid-generic 0003:062A:3286.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [SVEN RX-310 WIRELESS MOUSE] on usb-0000:00:02.0-4/input1 [ 4.705146] PM: Starting manual resume from disk [ 4.705151] PM: Hibernation image partition 8:38 present [ 4.705152] PM: Looking for hibernation image. [ 4.708791] PM: Image not found (code -22) [ 4.708792] PM: Hibernation image not present or could not be loaded. [ 4.848021] usb 1-5: new high-speed USB device number 5 using ehci-pci [ 4.898173] scsi 6:0:0:0: Direct-Access Kingston DT 100 G2 PMAP PQ: 0 ANSI: 0 CCS [ 4.900530] sd 6:0:0:0: [sdd] 30916608 512-byte logical blocks: (15.8 GB/14.7 GiB) [ 4.901791] sd 6:0:0:0: [sdd] Write Protect is off [ 4.901794] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00 [ 4.903066] sd 6:0:0:0: [sdd] No Caching mode page found [ 4.903089] sd 6:0:0:0: [sdd] Assuming drive cache: write through [ 4.908786] sdd: sdd1 [ 4.912788] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 4.962398] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null) [ 4.969773] usb 1-5: New USB device found, idVendor=058f, idProduct=6362 [ 4.969776] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.969777] usb 1-5: Product: Mass Storage Device [ 4.969779] usb 1-5: Manufacturer: Generic [ 4.969780] usb 1-5: SerialNumber: ... [ 4.970285] usb-storage 1-5:1.0: USB Mass Storage device detected [ 4.973709] scsi host7: usb-storage 1-5:1.0 [ 5.329346] systemd-journald[144]: Received SIGTERM from PID 1 (systemd). [ 5.489072] systemd: 20 output lines suppressed due to ratelimiting [ 5.847373] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 5.948169] systemd-fstab-generator[564]: ... [ 5.984805] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 5.986168] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 5.987916] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 5.988701] sd 7:0:0:0: [sde] Attached SCSI removable disk [ 5.990657] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 5.991415] sd 7:0:0:1: [sdf] Attached SCSI removable disk [ 5.993656] sd 7:0:0:2: [sdg] Attached SCSI removable disk [ 5.995153] sd 7:0:0:3: [sdh] Attached SCSI removable disk [ 6.794761] audit_printk_skb: 114 callbacks suppressed [ 7.126448] EXT4-fs (sdc5): re-mounted. Opts: acl [ 8.454297] systemd-journald[574]: Received request to flush runtime journal from PID 1 [ 10.055495] i2c i2c-3: nForce2 SMBus adapter at 0x600 [ 10.055520] i2c i2c-4: nForce2 SMBus adapter at 0x700 [ 10.071888] Uniform Multi-Platform E-IDE driver [ 10.296159] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 10.296173] snd_hda_intel 0000:00:05.0: Disabling MSI [ 10.349172] IT8716 SuperIO detected. [ 10.349468] parport_pc 00:02: reported by Plug and Play ACPI [ 10.349534] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.785045] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1988: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 10.785049] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.785051] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 10.785052] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 10.785053] snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0 [ 10.785054] snd_hda_codec_analog hdaudioC0D0: inputs: [ 10.785056] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x14 [ 10.785058] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x17 [ 10.785059] snd_hda_codec_analog hdaudioC0D0: Line=0x15 [ 10.785060] snd_hda_codec_analog hdaudioC0D0: CD=0x18 [ 10.852834] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.644640] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/sound/card0/input7 [ 11.644890] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8 [ 11.644949] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input9 [ 11.645036] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input10 [ 11.809066] Adding 4490236k swap on /dev/sdc6. Priority:-1 extents:1 across:4490236k FS [ 11.955723] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 12.325194] kvm: Nested Virtualization enabled [ 12.367116] EDAC MC: Ver: 3.0.0 [ 12.382593] EDAC amd64: DRAM ECC enabled. [ 12.382601] EDAC amd64: K8 revF or later detected (node 0). [ 12.382621] EDAC MC: DCT0 chip selects: [ 12.382622] EDAC amd64: MC: 0: 1024MB 1: 0MB [ 12.382623] EDAC amd64: MC: 2: 1024MB 3: 1024MB [ 12.382624] EDAC amd64: MC: 4: 1024MB 5: 0MB [ 12.382624] EDAC amd64: MC: 6: 0MB 7: 0MB [ 12.382835] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT) [ 12.382853] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) [ 12.382853] AMD64 EDAC driver v3.4.0 [ 12.389745] powernow_k8: fid 0x14 (2800 MHz), vid 0xa [ 12.389748] powernow_k8: fid 0x12 (2600 MHz), vid 0xc [ 12.389749] powernow_k8: fid 0x10 (2400 MHz), vid 0xe [ 12.389749] powernow_k8: fid 0xe (2200 MHz), vid 0x10 [ 12.389750] powernow_k8: fid 0xc (2000 MHz), vid 0x10 [ 12.389751] powernow_k8: fid 0xa (1800 MHz), vid 0x10 [ 12.389751] powernow_k8: fid 0x2 (1000 MHz), vid 0x12 [ 12.389789] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ (2 cpu cores) (version 2.20.00) [ 13.442108] ppdev: user-space parallel port driver [ 13.847346] audit_printk_skb: 33 callbacks suppressed [ 14.758567] it87: Found IT8716F chip at 0x290, revision 1 [ 14.758605] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x00000000000002AF (\_SB.PCI0.SBRG.SIOR.ECRE) (20160831/utaddress-247) [ 14.758614] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.953987] EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: acl [ 19.525722] audit_printk_skb: 63 callbacks suppressed [ 19.636613] vboxdrv: loading out-of-tree module taints kernel. [ 19.641435] vboxdrv: Found 2 processor cores [ 19.642810] vboxdrv: fAsync=1 offMin=0x8229 offMax=0x8229 [ 19.842964] vboxdrv: TSC mode is Asynchronous, tentative frequency 2812756692 Hz [ 19.842966] vboxdrv: Successfully loaded version 5.1.32 (interface 0x002a0000) [ 19.846590] VBoxNetFlt: Successfully started. [ 19.849255] VBoxNetAdp: Successfully started. [ 21.490564] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready [ 21.491167] forcedeth 0000:00:07.0 enp0s7: MSI enabled [ 21.491383] forcedeth 0000:00:07.0 enp0s7: no link during initialization [ 21.492415] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready [ 21.788974] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.922125] Netfilter messages via NETLINK v0.30. [ 21.932512] ctnetlink v0.93: registering with nfnetlink. [ 23.210053] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 24.711452] audit_printk_skb: 351 callbacks suppressed [ 30.007257] audit_printk_skb: 36 callbacks suppressed [ 95.031274] fuse init (API version 7.26) [ 103.149272] Bluetooth: Core ver 2.22 [ 103.149301] NET: Registered protocol family 31 [ 103.149302] Bluetooth: HCI device and connection manager initialized [ 103.149308] Bluetooth: HCI socket layer initialized [ 103.149312] Bluetooth: L2CAP socket layer initialized [ 103.149321] Bluetooth: SCO socket layer initialized [ 103.215407] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 103.215410] Bluetooth: BNEP filters: protocol multicast [ 103.215416] Bluetooth: BNEP socket layer initialized [ 301.797039] usb 1-8: new high-speed USB device number 6 using ehci-pci [ 301.915944] usb 1-8: New USB device found, idVendor=1782, idProduct=4001 [ 301.915949] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 301.915952] usb 1-8: Product: Spreadtrum [ 301.915955] usb 1-8: Manufacturer: Spreadtrum [ 301.915958] usb 1-8: SerialNumber: ... [ 304.311285] usb 1-8: USB disconnect, device number 6 [ 304.636037] usb 1-8: new high-speed USB device number 7 using ehci-pci [ 304.754919] usb 1-8: New USB device found, idVendor=1782, idProduct=5d03 [ 304.754923] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 304.754927] usb 1-8: Product: Spreadtrum [ 304.754930] usb 1-8: Manufacturer: Spreadtrum [ 304.754932] usb 1-8: SerialNumber: ... [ 304.757645] usb-storage 1-8:1.0: USB Mass Storage device detected [ 304.758686] scsi host8: usb-storage 1-8:1.0 [ 305.327481] usb 1-8: USB disconnect, device number 7 [ 305.669039] usb 1-8: new high-speed USB device number 8 using ehci-pci [ 305.787988] usb 1-8: New USB device found, idVendor=1782, idProduct=5d20 [ 305.787993] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 305.787996] usb 1-8: Product: Spreadtrum [ 305.787999] usb 1-8: Manufacturer: Spreadtrum [ 305.788022] usb 1-8: SerialNumber: ... [ 305.932157] usbcore: registered new interface driver cdc_ether [ 305.951982] rndis_host 1-8:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-8, RNDIS device, XXX [ 305.954443] usbcore: registered new interface driver rndis_host [ 305.970571] rndis_host 1-8:1.0 enp0s2f1u8: renamed from usb0 [ 305.996401] IPv6: ADDRCONF(NETDEV_UP): enp0s2f1u8: link is not ready [ 306.209605] NET: Registered protocol family 17 [ 402.710111] audit_printk_skb: 36 callbacks suppressed [ 414.043037] audit_printk_skb: 12 callbacks suppressed [ 441.622846] audit_printk_skb: 45 callbacks suppressed [ 514.134035] usb 1-5: reset high-speed USB device number 5 using ehci-pci [ 542.019497] audit_printk_skb: 9 callbacks suppressed [ 574.262794] audit_printk_skb: 9 callbacks suppressed [ 582.027086] audit_printk_skb: 12 callbacks suppressed [ 816.937757] audit_printk_skb: 9 callbacks suppressed [ 839.219520] audit_printk_skb: 9 callbacks suppressed [ 846.667933] audit_printk_skb: 12 callbacks suppressed [ 884.767416] audit_printk_skb: 9 callbacks suppressed [ 1197.302602] audit_printk_skb: 9 callbacks suppressed [ 1219.311973] audit_printk_skb: 9 callbacks suppressed [ 1235.009359] audit_printk_skb: 9 callbacks suppressed [ 1442.731943] audit_printk_skb: 12 callbacks suppressed [ 1472.118881] audit_printk_skb: 9 callbacks suppressed [ 1579.880692] audit_printk_skb: 9 callbacks suppressed [ 1629.049403] audit_printk_skb: 9 callbacks suppressed [ 1705.592747] audit_printk_skb: 9 callbacks suppressed [ 2042.188404] audit_printk_skb: 15 callbacks suppressed [ 2177.466840] audit_printk_skb: 9 callbacks suppressed [ 2263.837433] audit_printk_skb: 3 callbacks suppressed [ 2275.486476] audit_printk_skb: 51 callbacks suppressed [ 2818.006545] audit_printk_skb: 12 callbacks suppressed [ 2829.112105] audit_printk_skb: 9 callbacks suppressed [ 2926.727127] audit_printk_skb: 6 callbacks suppressed [ 5072.982056] usb 1-5: reset high-speed USB device number 5 using ehci-pci [ 7274.191275] audit_printk_skb: 9 callbacks suppressed [ 7580.246031] usb 1-5: reset high-speed USB device number 5 using ehci-pci [ 8740.024440] audit_printk_skb: 51 callbacks suppressed [ 8749.985212] audit_printk_skb: 48 callbacks suppressed [ 8925.591706] audit_printk_skb: 9 callbacks suppressed [ 8953.943835] audit_printk_skb: 9 callbacks suppressed [ 9100.395316] audit_printk_skb: 258 callbacks suppressed [ 9639.802241] audit_printk_skb: 45 callbacks suppressed [ 9648.647217] audit_printk_skb: 54 callbacks suppressed [ 9800.536968] audit_printk_skb: 120 callbacks suppressed [ 9805.568160] audit_printk_skb: 12 callbacks suppressed [ 9810.848796] audit_printk_skb: 9 callbacks suppressed [ 9855.587308] audit_printk_skb: 9 callbacks suppressed [10075.270224] audit_printk_skb: 6 callbacks suppressed [11040.082654] keepassx[2796]: segfault at 360 ip 00007fb4b937ab14 sp 00007ffeb788a2e0 error 4 in libQtGui.so.4.8.7[7fb4b8e47000+a29000] [11189.360153] audit_printk_skb: 81 callbacks suppressed [11582.808244] audit_printk_skb: 87 callbacks suppressed [11773.309090] audit_printk_skb: 51 callbacks suppressed [11798.033777] audit_printk_skb: 12 callbacks suppressed [12288.393785] gnome-calendar[4018]: segfault at 30 ip 000000000041f670 sp 00007fff4d9cbd88 error 4 in gnome-calendar[400000+61000] [12891.584131] xfce4-notifyd[31390]: segfault at 50 ip 00007fbcda56fcde sp 00007fff18e3cc00 error 4 in libc-2.24.so[7fbcda4ee000+1b4000] [12952.049520] ide-cd driver 5.00 [12952.076183] ide-gd driver 1.18 [12952.149974] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [13014.102028] usb 1-5: reset high-speed USB device number 5 using ehci-pci [13014.254189] sr 2:0:0:0: Attached scsi generic sg0 type 5 [13014.254609] sd 3:0:0:0: Attached scsi generic sg1 type 0 [13014.254685] sd 4:0:0:0: Attached scsi generic sg2 type 0 [13014.254749] sd 5:0:0:0: Attached scsi generic sg3 type 0 [13014.254815] sd 6:0:0:0: Attached scsi generic sg4 type 0 [13014.254879] sd 7:0:0:0: Attached scsi generic sg5 type 0 [13014.254945] sd 7:0:0:1: Attached scsi generic sg6 type 0 [13014.255026] sd 7:0:0:2: Attached scsi generic sg7 type 0 [13014.255088] sd 7:0:0:3: Attached scsi generic sg8 type 0