Probe #329e6f9308 of Pine Microsystems Pine64 PinePhone

Log: dmesg

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.8.0 (XXX@XXX) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.05.2-92-g1e57a3b591) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP Sun Oct 4 21:12:09 PDT 2020 [ 0.000000] Machine model: Pine64 PinePhone (1.2) [ 0.000000] earlycon: uart0 at MMIO32 0x0000000001c28000 (options '') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] cma: Reserved 256 MiB at 0x00000000f0000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xef9cc100-0xef9cdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] On node 0 totalpages: 786432 [ 0.000000] DMA zone: 4096 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 262144 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 8192 pages used for memmap [ 0.000000] DMA32 zone: 524288 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 22 pages/cpu s52248 r8192 d29672 u90112 [ 0.000000] pcpu-alloc: s52248 r8192 d29672 u90112 alloc=22*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: ARM erratum 843419 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 774144 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/ram0 ro ramdisk_size=100000 console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 fsck.repair=yes consoleblank=0 cma=256M [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x7bfff000-0x7ffff000] (64MB) [ 0.000000] Memory: 2647700K/3145728K available (11710K kernel code, 878K rwdata, 4868K rodata, 2368K init, 371K bss, 235884K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x300/0x4c4 with crng_init=0 [ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1 [ 0.000000] arch_timer: CPU0: Trapping CNTVCT access [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008852] Console: colour dummy device 80x25 [ 0.014115] printk: console [tty0] enabled [ 0.018438] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.028940] pid_max: default: 32768 minimum: 301 [ 0.033828] LSM: Security Framework initializing [ 0.038696] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.046309] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.056927] rcu: Hierarchical SRCU implementation. [ 0.066999] smp: Bringing up secondary CPUs ... [ 0.073479] Detected VIPT I-cache on CPU1 [ 0.073559] arch_timer: CPU1: Trapping CNTVCT access [ 0.073576] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.074953] Detected VIPT I-cache on CPU2 [ 0.075004] arch_timer: CPU2: Trapping CNTVCT access [ 0.075018] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.076267] Detected VIPT I-cache on CPU3 [ 0.076312] arch_timer: CPU3: Trapping CNTVCT access [ 0.076326] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.076447] smp: Brought up 1 node, 4 CPUs [ 0.128293] SMP: Total of 4 processors activated. [ 0.133123] CPU features: detected: 32-bit EL0 Support [ 0.138395] CPU features: detected: CRC32 instructions [ 0.143651] CPU features: detected: 32-bit EL1 Support [ 0.172107] CPU: All CPU(s) started at EL2 [ 0.176351] alternatives: patching kernel code [ 0.184369] devtmpfs: initialized [ 0.200611] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.210629] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.232289] pinctrl core: initialized pinctrl subsystem [ 0.238723] thermal_sys: Registered thermal governor 'fair_share' [ 0.238731] thermal_sys: Registered thermal governor 'bang_bang' [ 0.245010] thermal_sys: Registered thermal governor 'step_wise' [ 0.251177] thermal_sys: Registered thermal governor 'power_allocator' [ 0.259393] NET: Registered protocol family 16 [ 0.271676] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.279131] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.287213] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297049] cpuidle: using governor menu [ 0.301676] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.308795] ASID allocator initialised with 65536 entries [ 0.316103] Serial: AMBA PL011 UART driver [ 0.367938] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.374876] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.381779] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388661] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397699] cryptd: max_cpu_qlen set to 1000 [ 0.408857] iommu: Default domain type: Translated [ 0.414182] vgaarb: loaded [ 0.417558] SCSI subsystem initialized [ 0.422118] usbcore: registered new interface driver usbfs [ 0.427851] usbcore: registered new interface driver hub [ 0.433427] usbcore: registered new device driver usb [ 0.439648] mc: Linux media interface: v0.10 [ 0.444128] videodev: Linux video capture interface: v2.00 [ 0.449831] pps_core: LinuxPPS API ver. 1 registered [ 0.454923] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.464295] PTP clock support registered [ 0.468735] EDAC MC: Ver: 3.0.0 [ 0.475262] clocksource: Switched to clocksource arch_sys_counter [ 0.482194] VFS: Disk quotas dquot_6.6.0 [ 0.486347] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.506322] NET: Registered protocol family 2 [ 0.511768] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.520680] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.529291] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.537747] TCP: Hash tables configured (established 32768 bind 32768) [ 0.544678] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.551721] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.559472] NET: Registered protocol family 1 [ 0.564695] RPC: Registered named UNIX socket transport module. [ 0.570790] RPC: Registered udp transport module. [ 0.575774] RPC: Registered tcp transport module. [ 0.580599] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.587967] PCI: CLS 0 bytes, default 64 [ 0.592290] Trying to unpack rootfs image as initramfs... [ 9.723017] Freeing initrd memory: 86228K [ 9.729045] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 9.738481] kvm [1]: IPA Size Limit: 40bits [ 9.744083] kvm [1]: vgic interrupt IRQ1 [ 9.748361] kvm [1]: Hyp mode initialized successfully [ 9.760455] Initialise system trusted keyrings [ 9.765340] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 9.783750] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 9.791139] NFS: Registering the id_resolver key type [ 9.796496] Key type id_resolver registered [ 9.800801] Key type id_legacy registered [ 9.804929] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 9.812259] 9p: Installing v9fs 9p2000 file system support [ 9.907733] NET: Registered protocol family 38 [ 9.912328] Key type asymmetric registered [ 9.916554] Asymmetric key parser 'x509' registered [ 9.921643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 9.929425] io scheduler mq-deadline registered [ 9.934060] io scheduler kyber registered [ 9.939278] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device [ 9.947718] sun4i-usb-phy 1c19400.phy: Couldn't request VBUS detect GPIO [ 9.955381] sun6i-mipi-dphy 1ca1000.d-phy: Couldn't create the DPHY encoder regmap [ 9.969065] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 9.978629] sun50i-a64-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator [ 10.018324] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 10.034413] sun6i-mipi-dsi 1ca0000.dsi: Couldn't get VCC-DSI supply [ 10.048430] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 10.054833] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 10.061336] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 10.067818] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 10.076716] lima 1c40000.gpu: bus rate = 200000000 [ 10.081874] lima 1c40000.gpu: mod rate = 500000000 [ 10.087502] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 10.097406] brd: module loaded [ 10.114041] loop: module loaded [ 10.121675] libphy: Fixed MDIO Bus: probed [ 10.126239] VFIO - User Level meta-driver version: 0.3 [ 10.134390] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.141173] ehci-pci: EHCI PCI platform driver [ 10.145825] ehci-platform: EHCI generic platform driver [ 10.151604] ehci-platform 1c1a000.usb: EHCI Host Controller [ 10.157368] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 [ 10.165480] ehci-platform 1c1a000.usb: irq 20, io mem 0x01c1a000 [ 10.187289] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 [ 10.194801] hub 1-0:1.0: USB hub found [ 10.198721] hub 1-0:1.0: 1 port detected [ 10.204040] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.210408] ohci-pci: OHCI PCI platform driver [ 10.215084] ohci-platform: OHCI generic platform driver [ 10.220821] ohci-platform 1c1a400.usb: Generic Platform OHCI controller [ 10.227623] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 [ 10.235727] ohci-platform 1c1a400.usb: irq 21, io mem 0x01c1a400 [ 10.304458] hub 2-0:1.0: USB hub found [ 10.308375] hub 2-0:1.0: 1 port detected [ 10.314716] usbcore: registered new interface driver usb-storage [ 10.321599] musb-sunxi 1c19000.usb: Invalid or missing 'dr_mode' property [ 10.328575] musb-sunxi: probe of 1c19000.usb failed with error -22 [ 10.340142] sun6i-rtc 1f00000.rtc: registered as rtc0 [ 10.345420] sun6i-rtc 1f00000.rtc: setting system clock to 2020-10-05T04:36:52 UTC (1601872612) [ 10.354336] sun6i-rtc 1f00000.rtc: RTC enabled [ 10.359254] i2c /dev entries driver [ 10.365599] sun8i-di 1e00000.deinterlace: Device registered as /dev/video0 [ 10.377426] sdhci: Secure Digital Host Controller Interface driver [ 10.383807] sdhci: Copyright(c) Pierre Ossman [ 10.388564] Synopsys Designware Multimedia Card Interface Driver [ 10.396520] sdhci-pltfm: SDHCI platform and OF driver helper [ 10.404599] ledtrig-cpu: registered to indicate activity on CPUs [ 10.411586] hid: raw HID events driver (C) Jiri Kosina [ 10.418346] usbcore: registered new interface driver usbhid [ 10.424122] usbhid: USB HID core driver [ 10.428961] cedrus 1c0e000.video-codec: Device registered as /dev/video1 [ 10.444185] Initializing XFRM netlink socket [ 10.448857] NET: Registered protocol family 17 [ 10.453665] 9pnet: Installing 9P2000 support [ 10.458098] Key type dns_resolver registered [ 10.463296] registered taskstats version 1 [ 10.467574] Loading compiled-in X.509 certificates [ 10.498115] sun8i-rotate 1020000.rotate: Device registered as /dev/video2 [ 10.510729] sunxi-rsb 1f03400.rsb: RSB running at 4000000 Hz [ 10.517186] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found [ 10.526579] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 [ 10.543706] axp20x-adc axp813-adc: DMA mask not set [ 10.552212] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 10.571812] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set [ 10.581450] random: fast init done [ 10.585218] dcdc1: supplied by regulator-dummy [ 10.590645] dcdc2: supplied by regulator-dummy [ 10.596047] dcdc4: supplied by regulator-dummy [ 10.601297] dcdc5: supplied by regulator-dummy [ 10.606460] dcdc6: supplied by regulator-dummy [ 10.611724] dc1sw: supplied by regulator-dummy [ 10.616699] aldo1: supplied by regulator-dummy [ 10.621797] aldo2: supplied by regulator-dummy [ 10.626939] aldo3: supplied by regulator-dummy [ 10.631955] dldo1: supplied by regulator-dummy [ 10.637015] dldo2: supplied by regulator-dummy [ 10.642093] dldo3: supplied by regulator-dummy [ 10.647120] dldo4: supplied by regulator-dummy [ 10.652172] eldo1: supplied by regulator-dummy [ 10.657318] eldo2: supplied by regulator-dummy [ 10.662353] eldo3: supplied by regulator-dummy [ 10.667451] fldo1: supplied by regulator-dummy [ 10.672537] fldo2: supplied by regulator-dummy [ 10.677612] rtc-ldo: supplied by regulator-dummy [ 10.682795] ldo-io0: supplied by regulator-dummy [ 10.688065] ldo-io1: supplied by regulator-dummy [ 10.693273] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded [ 10.707371] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 10.716855] printk: console [ttyS0] disabled [ 10.721411] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 31, base_baud = 1500000) is a 16550A [ 10.730373] printk: console [ttyS0] enabled [ 10.738846] printk: bootconsole [uart0] disabled [ 10.750241] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 32, base_baud = 1500000) is a 16550A [ 10.759303] serial serial0: tty port ttyS1 registered [ 10.765759] 1c28c00.serial: ttyS2 at MMIO 0x1c28c00 (irq = 33, base_baud = 1500000) is a 16550A [ 10.776523] panel-sitronix-st7703 1ca0000.dsi.0: [drm:st7703_probe] *ERROR* mipi_dsi_attach failed (-517). Is host ready? [ 10.790616] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops) [ 10.800688] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer_ops) [ 10.808673] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 10.816561] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops) [ 10.824913] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops) [ 10.832997] sun4i-drm display-engine: bound 1ca0000.dsi (ops sun6i_dsi_ops) [ 10.841535] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy) [ 10.852019] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver [ 10.860313] sun4i-drm display-engine: bound 1ee0000.hdmi (ops sun8i_dw_hdmi_ops) [ 10.867785] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.875188] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1 [ 10.883089] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 10.891133] ehci-platform 1c1b000.usb: EHCI Host Controller [ 10.896785] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3 [ 10.904774] ehci-platform 1c1b000.usb: irq 22, io mem 0x01c1b000 [ 10.910974] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 10.923309] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 10.930671] hub 3-0:1.0: USB hub found [ 10.934516] hub 3-0:1.0: 1 port detected [ 10.940083] ohci-platform 1c1b400.usb: Generic Platform OHCI controller [ 10.946774] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4 [ 10.954736] ohci-platform 1c1b400.usb: irq 23, io mem 0x01c1b400 [ 11.024407] hub 4-0:1.0: USB hub found [ 11.028260] hub 4-0:1.0: 1 port detected [ 11.136835] Goodix-TS 1-005d: ID 917S, version: 0200 [ 11.143650] Goodix-TS 1-005d: Direct firmware load for goodix_917S_cfg.bin failed with error -2 [ 11.170894] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 11.182763] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-005d/input/input1 [ 11.203267] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 11.213583] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq [ 11.243814] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 11.269542] mmc0: new high speed SDXC card at address aaaa [ 11.271273] usb 3-1: new high-speed USB device number 2 using ehci-platform [ 11.276064] mmcblk0: mmc0:aaaa SL64G 59.5 GiB [ 11.286652] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 11.299432] sgm3140 led-controller: supply vin not found, using dummy regulator [ 11.306866] sgm3140 led-controller: flash-max-timeout-us property missing [ 11.322112] scpi_protocol scpi: SCP Protocol 1.2 Firmware 0.1.9000 version [ 11.329961] usb0-vbus: supplied by vcc5v0 [ 11.334780] mmcblk0: p1 p2 p3 [ 11.339614] mmc1: new high speed SDIO card at address 0001 [ 11.428038] mmc2: new DDR MMC card at address 0001 [ 11.431338] mmcblk2: mmc2:0001 DA4032 29.1 GiB [ 11.431778] mmcblk2boot0: mmc2:0001 DA4032 partition 1 4.00 MiB [ 11.432209] mmcblk2boot1: mmc2:0001 DA4032 partition 2 4.00 MiB [ 11.433988] mmcblk2: p1 p2 [ 11.637926] Console: switching to colour frame buffer device 90x90 [ 11.700492] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device [ 11.707809] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599 [ 11.713800] panel-sitronix-st7703 1ca0000.dsi.0: [drm:st7703_probe] 720x1440@55 24bpp dsi 4dl - ready [ 11.729156] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 11.739324] of_cfs_init [ 11.741903] of_cfs_init: OK [ 11.744832] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.772845] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.785131] Freeing unused kernel memory: 2368K [ 11.803324] Run /init as init process [ 11.807137] with arguments: [ 11.807142] /init [ 11.807146] with environment: [ 11.807151] HOME=/ [ 11.807155] TERM=linux [ 11.868446] NET: Registered protocol family 10 [ 11.876492] Segment Routing with IPv6 [ 11.887825] systemd[1]: systemd 245 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT +GNUTLS -ACL +XZ +LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 11.915017] systemd[1]: Detected architecture arm64. [ 11.975470] systemd[1]: Set hostname to ... [ 11.981251] random: systemd: uninitialized urandom read (16 bytes read) [ 11.988077] systemd[1]: Initializing machine ID from random generator. [ 12.167552] systemd[1]: /usr/lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. [ 12.188509] systemd[1]: /usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 12.230334] systemd[1]: /usr/lib/systemd/system/ninfod.service:3: Invalid URL, ignoring: ninfod(8) [ 12.263706] random: systemd: uninitialized urandom read (16 bytes read) [ 12.270673] systemd[1]: system-serial\x2dgetty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 12.284129] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 12.296053] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.319753] random: systemd: uninitialized urandom read (16 bytes read) [ 12.326971] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 12.351637] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.375628] systemd[1]: Reached target Paths. [ 12.395474] systemd[1]: Reached target Remote File Systems. [ 12.409106] systemd[1]: Reached target Slices. [ 12.427488] systemd[1]: Reached target Swap. [ 12.448041] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 12.479739] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 12.489347] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.512404] systemd[1]: Listening on Journal Socket. [ 12.532270] systemd[1]: Listening on udev Control Socket. [ 12.556101] systemd[1]: Listening on udev Kernel Socket. [ 12.590419] systemd[1]: Mounting Huge Pages File System... [ 12.622458] systemd[1]: Mounting POSIX Message Queue File System... [ 12.656646] systemd[1]: Mounting Kernel Debug File System... [ 12.682236] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 12.699854] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 12.736653] systemd[1]: Starting SkiffOS resize persist partition... [ 12.779814] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ 12.816071] systemd[1]: Starting Remount Root and Kernel File Systems... [ 12.852505] systemd[1]: Starting udev Coldplug all Devices... [ 12.891748] systemd[1]: Mounted Huge Pages File System. [ 12.924113] systemd[1]: Mounted POSIX Message Queue File System. [ 12.956263] systemd[1]: Mounted Kernel Debug File System. [ 12.990800] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 13.038465] systemd[1]: Finished Remount Root and Kernel File Systems. [ 13.085482] systemd[1]: Starting Rebuild Hardware Database... [ 13.119632] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 13.152657] systemd[1]: Starting Create Static Device Nodes in /dev... [ 13.190642] systemd[1]: Finished Rebuild Hardware Database. [ 13.226578] systemd[1]: Finished Create Static Device Nodes in /dev. [ 13.260276] systemd[1]: Reached target Local File Systems (Pre). [ 13.300305] systemd[1]: Mounting /tmp... [ 13.333099] systemd[1]: Starting udev Kernel Device Manager... [ 13.366287] systemd[1]: Mounted /tmp. [ 13.394953] systemd[1]: Finished SkiffOS resize persist partition. [ 13.428353] systemd[1]: Started udev Kernel Device Manager. [ 13.462086] systemd[1]: Finished udev Coldplug all Devices. [ 13.496337] systemd[1]: Reached target Local File Systems. [ 13.535651] systemd[1]: Starting SkiffOS early-init... [ 13.567976] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 13.739400] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 14.012364] i2c-gpio i2c-csi: using lines 141 (SDA) and 140 (SCL) [ 14.058207] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 14.205242] 8723cs: module is from the staging directory, the quality is unknown, you have been warned. [ 14.397523] systemd[1]: Found device /dev/ttyS0. [ 14.406667] usbcore: registered new interface driver usbserial_generic [ 14.424511] usbserial: USB Serial support registered for generic [ 14.473053] usbcore: registered new interface driver cdc_wdm [ 14.556427] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input3 [ 14.625125] qmi_wwan 3-1:1.4: cdc-wdm0: USB WDM device [ 14.625660] usbcore: registered new interface driver option [ 14.651778] usbserial: USB Serial support registered for GSM modem (1-port) [ 14.656640] random: crng init done [ 14.677907] random: 7 urandom warning(s) missed due to ratelimiting [ 14.705004] qmi_wwan 3-1:1.4 wwan0: register 'qmi_wwan' at usb-1c1b000.usb-1, WWAN/QMI device, XX:XX:XX:XX:XX:XX [ 14.731424] usbcore: registered new interface driver qmi_wwan [ 14.748529] systemd[1]: Reloading. [ 14.882603] iio iio:device3: interrupts on the rising edge [ 14.917526] bt-sco bt-sco-codec: ASoC: sink widget Capture overwritten [ 14.932157] bt-sco bt-sco-codec: ASoC: source widget Playback overwritten [ 14.941106] systemd[1]: /usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 14.947007] simple-amplifier audio-amplifier: supply VCC not found, using dummy regulator [ 14.950832] anx7688 1-0028: power enabled [ 14.951778] anx7688 1-0028: Vendor id 0x1f29 [ 14.995415] anx7688 1-0028: power disabled [ 15.028276] anx7688 1-0028: plug irq (cd=1) [ 15.038849] Bluetooth: Core ver 2.22 [ 15.047288] anx7688 1-0028: cable inserted [ 15.050241] iio iio:device3: registered magnetometer lis3mdl [ 15.050243] NET: Registered protocol family 31 [ 15.050248] Bluetooth: HCI device and connection manager initialized [ 15.056923] systemd[1]: /usr/lib/systemd/system/ninfod.service:3: Invalid URL, ignoring: ninfod(8) [ 15.085992] systemd[1]: /usr/lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. [ 15.087282] anx7688 1-0028: power enabled [ 15.089613] Bluetooth: HCI socket layer initialized [ 15.157024] anx7688 1-0028: eeprom0 = 0x03 [ 15.168662] anx7688 1-0028: fw loaded after 20 ms [ 15.168679] Bluetooth: L2CAP socket layer initialized [ 15.181463] anx7688 1-0028: OCM firmware loaded (version 0x2312) [ 15.193614] Bluetooth: SCO socket layer initialized [ 15.221209] anx7688 1-0028: send pd packet cmd=0 05 00 32 90 01 26 12 [ 15.222905] anx7688 1-0028: send pd packet cmd=1 05 01 2c 91 01 26 16 [ 15.224593] anx7688 1-0028: send pd packet cmd=2 11 02 00 00 00 ec 00 00 00 00 00 00 00 00 39 00 00 51 77 [ 15.227371] anx7688 1-0028: send pd packet cmd=3 05 03 00 00 01 ff f8 [ 15.229050] anx7688 1-0028: OCM configuration completed [ 15.230460] anx7688 1-0028: status changed to 0x00 [ 15.230467] anx7688 1-0028: cc_status changed to CC1 = SRC.Open CC2 = SRC.Open [ 15.230471] anx7688 1-0028: dp state changed to 0x00 [ 15.280240] i2c i2c-2: Added multiplexed i2c bus 5 [ 15.326494] option 3-1:1.0: GSM modem (1-port) converter detected [ 15.428273] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 15.443383] option 3-1:1.1: GSM modem (1-port) converter detected [ 15.449149] systemd[1]: systemd-udev-trigger.service: Succeeded. [ 15.482153] systemd[1]: Stopped udev Coldplug all Devices. [ 15.516172] input: gpio-vibrator as /devices/platform/vibrator/input/input5 [ 15.523445] systemd[1]: Stopping udev Coldplug all Devices... [ 15.562559] Bluetooth: HCI UART driver ver 2.3 [ 15.573254] systemd[1]: Starting udev Coldplug all Devices... [ 15.575140] Bluetooth: HCI UART protocol H4 registered [ 15.602134] Bluetooth: HCI UART protocol LL registered [ 15.615378] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 15.629850] Bluetooth: HCI UART protocol Broadcom registered [ 15.649827] anx7688 1-0028: status irq [ 15.651483] anx7688 1-0028: soft = 0x38 [ 15.652754] anx7688 1-0028: cc_status changed to CC1 = SRC.Open CC2 = SNK.Default [ 15.668391] systemd[1]: Finished SkiffOS early-init. [ 15.714810] asoc-simple-card sound: sun8i-codec-aif1 <-> 1c22c00.dai mapping ok [ 15.730100] asoc-simple-card sound: sun8i-codec-aif2 <-> ec25 mapping ok [ 15.730129] asoc-simple-card sound: sun8i-codec-aif3 <-> bt-sco-pcm mapping ok [ 15.731306] debugfs: File 'Playback' in directory 'dapm' already present! [ 15.745431] systemd[1]: Starting Journal Service... [ 15.788121] debugfs: File 'Capture' in directory 'dapm' already present! [ 15.815647] systemd[1]: Starting Load Kernel Modules... [ 15.827711] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 15.828056] option 3-1:1.2: GSM modem (1-port) converter detected [ 15.850260] fuse: init (API version 7.31) [ 15.864095] tun: Universal TUN/TAP device driver, 1.6 [ 15.924431] sun6i-csi 1cb0000.csi: creating gc2145 4-003c:0 -> sun6i-csi:0 link [ 15.924443] sun6i-csi 1cb0000.csi: creating ov5640 4-004c:0 -> sun6i-csi:0 link [ 15.943337] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 15.943581] option 3-1:1.3: GSM modem (1-port) converter detected [ 15.944121] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3 [ 15.974050] input: sun50i-a64-audio Headphone Jack as /devices/platform/sound/sound/card0/input4 [ 16.102417] anx7688 1-0028: status irq [ 16.104035] anx7688 1-0028: soft = 0x01 [ 16.107774] anx7688 1-0028: recv ocm message cmd=242 01 f2 0d [ 16.328238] systemd[1]: Started Journal Service. [ 17.231290] gc2145 4-003c: [wr fe] <= 00 [ 17.231700] gc2145 4-003c: bank switch: 0x00 [ 17.244532] gc2145 4-003c: [rd f0] => 21 45 [ 17.244539] gc2145 4-003c: device id: 0x2145 [ 17.244549] gc2145 4-003c: [wr fe] <= f0 [ 17.244908] gc2145 4-003c: [wr fc] <= 06 [ 17.245265] gc2145 4-003c: [wr f7] <= 1d [ 17.245622] gc2145 4-003c: [wr f8] <= 84 [ 17.245980] gc2145 4-003c: [wr fa] <= 00 [ 17.246338] gc2145 4-003c: [wr f9] <= fe [ 17.246694] gc2145 4-003c: [wr f2] <= 00 [ 17.247053] gc2145 4-003c: [wr 19] <= 0c [ 17.247475] gc2145 4-003c: [wr 20] <= 01 [ 17.247838] gc2145 4-003c: [wr 80] <= 0b [ 17.248196] gc2145 4-003c: [wr 86] <= 00 [ 17.276720] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2 [ 17.301417] gc2145 4-003c: Failed to read firmware gc2145-init.bin, continuing anyway... [ 17.325490] gc2145 4-003c: [wr fd] <= 00 [ 17.325892] gc2145 4-003c: [wr 18] <= 0a [ 17.326251] gc2145 4-003c: [wr 09] <= 00 00 [ 17.326720] gc2145 4-003c: [wr 0b] <= 00 00 [ 17.327188] gc2145 4-003c: [wr 0d] <= 04 d0 [ 17.327676] gc2145 4-003c: [wr 0f] <= 06 50 [ 17.328144] gc2145 4-003c: [wr 05] <= 01 f1 [ 17.328610] gc2145 4-003c: [wr 07] <= 00 08 [ 17.329079] gc2145 4-003c: [wr 11] <= 00 1e [ 17.329548] gc2145 4-003c: [wr 13] <= 02 [ 17.329905] gc2145 4-003c: [wr 14] <= 02 [ 17.330269] gc2145 4-003c: [wr f7] <= 11 [ 17.330627] gc2145 4-003c: [wr f8] <= 84 [ 17.330983] gc2145 4-003c: [wr fa] <= 10 [ 17.331877] gc2145 4-003c: [rd 82] => 00 [ 17.331890] gc2145 4-003c: [wr 82] <= 00 [ 17.332261] gc2145 4-003c: [wr b3] <= 40 [ 17.332637] gc2145 4-003c: [wr b4] <= 40 [ 17.333012] gc2145 4-003c: [wr b5] <= 40 [ 17.333392] gc2145 4-003c: [wr fe] <= 01 [ 17.333779] gc2145 4-003c: bank switch: 0x01 [ 17.346069] gc2145 4-003c: [wr ec] <= 04 [ 17.346465] gc2145 4-003c: [wr ed] <= 04 [ 17.346825] gc2145 4-003c: [wr ee] <= c0 [ 17.347187] gc2145 4-003c: [wr ef] <= 8e [ 17.347644] gc2145 4-003c: [wr fe] <= 00 [ 17.348010] gc2145 4-003c: bank switch: 0x00 [ 17.361656] gc2145 4-003c: [rd 82] => 00 [ 17.361665] gc2145 4-003c: [wr 82] <= 02 [ 17.362027] gc2145 4-003c: [wr b6] <= 00 [ 17.362386] gc2145 4-003c: [wr 03] <= 04 b0 [ 17.362856] gc2145 4-003c: [wr b1] <= 20 [ 17.363216] gc2145 4-003c: [wr b2] <= e0 [ 17.363638] gc2145 4-003c: [wr fe] <= 01 [ 17.364003] gc2145 4-003c: bank switch: 0x01 [ 17.376098] gc2145 4-003c: [wr 01] <= 04 [ 17.376501] gc2145 4-003c: [wr 02] <= c0 [ 17.376863] gc2145 4-003c: [wr 03] <= 04 [ 17.377225] gc2145 4-003c: [wr 04] <= 8e [ 17.377585] gc2145 4-003c: [wr 05] <= 08 [ 17.377946] gc2145 4-003c: [wr 06] <= b8 [ 17.378306] gc2145 4-003c: [wr 07] <= 08 [ 17.378667] gc2145 4-003c: [wr 08] <= 86 [ 17.379031] gc2145 4-003c: [wr fe] <= 00 [ 17.379445] gc2145 4-003c: bank switch: 0x00 [ 17.392408] gc2145 4-003c: [wr b6] <= 01 [ 17.392807] gc2145 4-003c: [wr fe] <= 01 [ 17.393165] gc2145 4-003c: bank switch: 0x01 [ 17.404994] gc2145 4-003c: [wr 27] <= 01 36 [ 17.405507] gc2145 4-003c: [wr 35] <= 50 [ 17.405869] gc2145 4-003c: [wr 29] <= 02 6c [ 17.406340] gc2145 4-003c: [wr 36] <= 50 [ 17.406702] gc2145 4-003c: [wr 2b] <= 03 a2 [ 17.407174] gc2145 4-003c: [wr 37] <= 50 [ 17.407598] gc2145 4-003c: [wr 2d] <= 04 d8 [ 17.408073] gc2145 4-003c: [wr 38] <= 50 [ 17.408434] gc2145 4-003c: [wr 2f] <= 06 0e [ 17.408904] gc2145 4-003c: [wr 39] <= 50 [ 17.409266] gc2145 4-003c: [wr 31] <= 07 44 [ 17.409736] gc2145 4-003c: [wr 3a] <= 50 [ 17.410097] gc2145 4-003c: [wr 33] <= 08 7a [ 17.410564] gc2145 4-003c: [wr 3b] <= 50 [ 17.410922] gc2145 4-003c: [wr 1f] <= 50 [ 17.411321] gc2145 4-003c: [wr 20] <= e0 [ 17.411685] gc2145 4-003c: [wr fe] <= 00 [ 17.412042] gc2145 4-003c: bank switch: 0x00 [ 17.423748] gc2145 4-003c: [wr 84] <= 00 [ 17.424609] gc2145 4-003c: [rd 80] => 0b [ 17.424615] gc2145 4-003c: [wr 80] <= 4b [ 17.425439] gc2145 4-003c: [rd 80] => 0b [ 17.425445] gc2145 4-003c: [wr 80] <= 0b [ 17.425804] gc2145 4-003c: [wr 24] <= ff [ 17.426171] gc2145 4-003c: [wr b6] <= 01 [ 17.426531] gc2145 4-003c: [wr fe] <= 01 [ 17.426889] gc2145 4-003c: bank switch: 0x01 [ 17.438491] gc2145 4-003c: [wr 13] <= 7b [ 17.438888] gc2145 4-003c: [wr fe] <= 00 [ 17.439273] gc2145 4-003c: bank switch: 0x00 [ 17.451355] gc2145 4-003c: [rd 17] => 00 [ 17.451367] gc2145 4-003c: [wr 17] <= 00 [ 17.452197] gc2145 4-003c: [rd 17] => 00 [ 17.452202] gc2145 4-003c: [wr 17] <= 00 [ 17.452563] gc2145 4-003c: [wr 8c] <= 00 [ 17.452923] gc2145 4-003c: [wr 8d] <= 01 [ 17.479763] systemd-journald[2519]: Received client request to flush runtime journal. [ 21.119539] anx7688 1-0028: status irq [ 21.121114] anx7688 1-0028: soft = 0x01 [ 21.124690] anx7688 1-0028: recv ocm message cmd=242 01 f2 0d [ 23.651952] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 26.136800] anx7688 1-0028: status irq [ 26.138395] anx7688 1-0028: soft = 0x01 [ 26.141937] anx7688 1-0028: recv ocm message cmd=242 01 f2 0d [ 42.060836] usb0-vbus: disabling [ 42.071384] vcc5v0: disabling [ 120.897418] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 120.928865] Bridge firewalling registered [ 160.499517] process '...' started with executable stack [ 160.819878] Adding 2047996k swap on /mnt/XXXXXXXXXXXXXXXXXXXXX Priority:-2 extents:7 across:2220028k SS [ 249.028044] docker0: port 1(veth9fe15be) entered blocking state [ 249.046348] docker0: port 1(veth9fe15be) entered disabled state [ 249.060671] device veth9fe15be entered promiscuous mode [ 249.474847] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 249.929352] eth0: renamed from veth18188b8 [ 249.968488] IPv6: ADDRCONF(NETDEV_CHANGE): veth9fe15be: link becomes ready [ 249.983025] docker0: port 1(veth9fe15be) entered blocking state [ 249.996296] docker0: port 1(veth9fe15be) entered forwarding state [ 250.010174] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 539.881094] docker0: port 2(vetha87d2de) entered blocking state [ 539.894935] docker0: port 2(vetha87d2de) entered disabled state [ 539.895364] device vetha87d2de entered promiscuous mode [ 540.728772] eth0: renamed from veth91c126b [ 540.772194] IPv6: ADDRCONF(NETDEV_CHANGE): vetha87d2de: link becomes ready [ 540.796194] docker0: port 2(vetha87d2de) entered blocking state [ 540.814343] docker0: port 2(vetha87d2de) entered forwarding state [ 582.361916] docker0: port 1(veth9fe15be) entered disabled state [ 582.376504] veth18188b8: renamed from eth0 [ 582.451700] docker0: port 1(veth9fe15be) entered disabled state [ 582.468528] device veth9fe15be left promiscuous mode [ 582.481103] docker0: port 1(veth9fe15be) entered disabled state [ 649.704477] docker0: port 2(vetha87d2de) entered disabled state [ 649.728152] veth91c126b: renamed from eth0 [ 649.879768] docker0: port 2(vetha87d2de) entered disabled state [ 649.896369] device vetha87d2de left promiscuous mode [ 649.908309] docker0: port 2(vetha87d2de) entered disabled state [ 653.195142] docker0: port 1(vethde72ba5) entered blocking state [ 653.217370] docker0: port 1(vethde72ba5) entered disabled state [ 653.239933] device vethde72ba5 entered promiscuous mode [ 653.915121] eth0: renamed from veth04d7319 [ 653.954731] IPv6: ADDRCONF(NETDEV_CHANGE): vethde72ba5: link becomes ready [ 653.978057] docker0: port 1(vethde72ba5) entered blocking state [ 653.999782] docker0: port 1(vethde72ba5) entered forwarding state [ 656.293792] docker0: port 1(vethde72ba5) entered disabled state [ 656.316365] veth04d7319: renamed from eth0 [ 656.420836] docker0: port 1(vethde72ba5) entered disabled state [ 656.446997] device vethde72ba5 left promiscuous mode [ 656.461533] docker0: port 1(vethde72ba5) entered disabled state [ 658.335719] docker0: port 1(veth72ec900) entered blocking state [ 658.352811] docker0: port 1(veth72ec900) entered disabled state [ 658.353204] device veth72ec900 entered promiscuous mode [ 659.051522] eth0: renamed from veth417193c [ 659.088237] IPv6: ADDRCONF(NETDEV_CHANGE): veth72ec900: link becomes ready [ 659.111506] docker0: port 1(veth72ec900) entered blocking state [ 659.127524] docker0: port 1(veth72ec900) entered forwarding state [ 660.180101] docker0: port 1(veth72ec900) entered disabled state [ 660.205588] veth417193c: renamed from eth0 [ 660.318310] docker0: port 1(veth72ec900) entered disabled state [ 660.339088] device veth72ec900 left promiscuous mode [ 660.357342] docker0: port 1(veth72ec900) entered disabled state [ 675.175175] docker0: port 1(veth15ef9b8) entered blocking state [ 675.187773] docker0: port 1(veth15ef9b8) entered disabled state [ 675.204827] device veth15ef9b8 entered promiscuous mode [ 675.854245] eth0: renamed from veth8667c23 [ 675.903245] IPv6: ADDRCONF(NETDEV_CHANGE): veth15ef9b8: link becomes ready [ 675.926135] docker0: port 1(veth15ef9b8) entered blocking state [ 675.938528] docker0: port 1(veth15ef9b8) entered forwarding state


Hardware for Linux and BSD

GitHub