[ 0.000000] Linux version 4.9.60-nrj-desktop-1rosa-x86_64 (XXX@XXX) (gcc version 5.4.1 20170404 (ROSA) (Linaro GCC 5.4-2017.05) ) #1 SMP PREEMPT Sat Nov 4 10:29:17 UTC 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.60-nrj-desktop-1rosa-x86_64 root=UUID=HASH_461-A60C-9897-FB21-AF768653B3D0 ro splash=silent logo.nologo quiet resume=UUID=HASH_B21-D3AF-E663-0B6F-17FA87E4CC53 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ae915fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ae916000-0x00000000ae9c4fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ae9c5000-0x00000000aed2efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aed2f000-0x00000000aed2ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aed30000-0x00000000aef32fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000aef33000-0x00000000af623fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000af624000-0x00000000af7f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000af7f3000-0x00000000af7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff010000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x00000001aeffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xae9a6000 ACPI 2.0=0xae9a6000 SMBIOS=0xf04c0 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 355V4C/356V4C/3445VC/3545VC/355V5, BIOS P07ABF 07/04/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1af000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000AF800000 mask FFFFFF800000 uncachable [ 0.000000] 3 base 0000B0000000 mask FFFFF0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 00000001af000000 aka 6896M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xaf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x140fb4000, 0x140fb4fff] PGTABLE [ 0.000000] BRK [0x140fb5000, 0x140fb5fff] PGTABLE [ 0.000000] BRK [0x140fb6000, 0x140fb6fff] PGTABLE [ 0.000000] BRK [0x140fb7000, 0x140fb7fff] PGTABLE [ 0.000000] BRK [0x140fb8000, 0x140fb8fff] PGTABLE [ 0.000000] BRK [0x140fb9000, 0x140fb9fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31e34000-0x34f11fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000AE9A6000 000024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 0x00000000AE9A6078 000074 (v01 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000AE9AFC08 00010C (v05 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000AE9A6188 009A79 (v02 SECCSD LH43STAR 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000AE9BC080 000040 [ 0.000000] ACPI: APIC 0x00000000AE9AFD18 000072 (v03 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000AE9AFD90 000044 (v01 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000AE9AFDD8 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x00000000AE9AFE18 000038 (v01 SECCSD LH43STAR 01072009 AMI 00000005) [ 0.000000] ACPI: VFCT 0x00000000AE9AFE50 005084 (v01 AMDG GOPTODRV 00000001 AMDG 00000001) [ 0.000000] ACPI: BGRT 0x00000000AE9B4ED8 000038 (v00 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000AE9B4F10 000B9C (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000AE9B5AB0 001ECC (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: SLIC 0x00000000AE9B7980 000176 (v01 SECCSD LH43STAR 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001aeffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1aeff7000-0x1aeffafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001aeffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ae915fff] [ 0.000000] node 0: [mem 0x00000000aed2f000-0x00000000aed2ffff] [ 0.000000] node 0: [mem 0x00000000aef33000-0x00000000af623fff] [ 0.000000] node 0: [mem 0x00000000af7f3000-0x00000000af7fffff] [ 0.000000] node 0: [mem 0x0000000100001000-0x00000001aeffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001aeffffff] [ 0.000000] On node 0 totalpages: 1433523 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 23 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11137 pages used for memmap [ 0.000000] DMA32 zone: 712725 pages, LIFO batch:31 [ 0.000000] Normal zone: 11200 pages used for memmap [ 0.000000] Normal zone: 716799 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xae916000-0xae9c4fff] [ 0.000000] PM: Registered nosave memory: [mem 0xae9c5000-0xaed2efff] [ 0.000000] PM: Registered nosave memory: [mem 0xaed30000-0xaef32fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf624000-0xaf7f2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xff00ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff010000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0xaf800000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff8801aec00000 s107032 r8192 d32232 u524288 [ 0.000000] pcpu-alloc: s107032 r8192 d32232 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1411099 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.60-nrj-desktop-1rosa-x86_64 root=UUID=HASH_461-A60C-9897-FB21-AF768653B3D0 ro splash=silent logo.nologo quiet resume=UUID=HASH_B21-D3AF-E663-0B6F-17FA87E4CC53 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 5474124K/5734092K available (8116K kernel code, 1359K rwdata, 3680K rodata, 1440K init, 948K bss, 259968K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2295.674 MHz processor [ 0.000062] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.34 BogoMIPS (lpj=2295674) [ 0.000069] pid_max: default: 32768 minimum: 301 [ 0.000088] ACPI: Core revision 20160831 [ 0.023017] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.023705] Security Framework initialized [ 0.023708] SELinux: Disabled at boot. [ 0.025299] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.030722] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.033033] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033062] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033843] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. [ 0.033855] CPU: Physical Processor ID: 0 [ 0.033856] CPU: Processor Core ID: 0 [ 0.033860] mce: CPU supports 7 MCE banks [ 0.033894] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.033896] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.034832] Freeing SMP alternatives memory: 32K [ 0.042902] ftrace: allocating 30998 entries in 122 pages [ 0.066245] smpboot: Max logical packages: 1 [ 0.066618] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.178402] smpboot: CPU0: AMD A10-4600M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1) [ 0.178407] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.178412] ... version: 0 [ 0.178413] ... bit width: 48 [ 0.178413] ... generic registers: 6 [ 0.178414] ... value mask: 0000ffffffffffff [ 0.178415] ... max period: 00007fffffffffff [ 0.178416] ... fixed-purpose events: 0 [ 0.178416] ... event mask: 000000000000003f [ 0.187594] MCE: In-kernel MCE decoding enabled. [ 0.196556] x86: Booting SMP configuration: [ 0.196561] .... node #0, CPUs: #1 #2 #3 [ 0.422479] x86: Booted up 1 node, 4 CPUs [ 0.422481] smpboot: Total of 4 processors activated (18362.72 BogoMIPS) [ 0.423688] devtmpfs: initialized [ 0.423772] x86/mm: Memory block size: 128MB [ 0.427685] PM: Registering ACPI NVS region [mem 0xae916000-0xae9c4fff] (716800 bytes) [ 0.427697] PM: Registering ACPI NVS region [mem 0xaed30000-0xaef32fff] (2109440 bytes) [ 0.427795] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.427807] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.427860] xor: automatically using best checksumming function avx [ 0.427862] pinctrl core: initialized pinctrl subsystem [ 0.427958] RTC time: 20:33:24, date: 01/16/18 [ 0.428082] NET: Registered protocol family 16 [ 0.431475] cpuidle: using governor ladder [ 0.437473] cpuidle: using governor menu [ 0.437619] ACPI: bus type PCI registered [ 0.437621] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.437756] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.437758] PCI: not using MMCONFIG [ 0.437759] PCI: Using configuration type 1 for base access [ 0.437760] PCI: Using configuration type 1 for extended access [ 0.444784] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.444786] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.461344] raid6: sse2x1 gen() 4816 MB/s [ 0.478343] raid6: sse2x1 xor() 3458 MB/s [ 0.495339] raid6: sse2x2 gen() 7796 MB/s [ 0.512335] raid6: sse2x2 xor() 5248 MB/s [ 0.529335] raid6: sse2x4 gen() 9140 MB/s [ 0.546332] raid6: sse2x4 xor() 4525 MB/s [ 0.546333] raid6: using algorithm sse2x4 gen() 9140 MB/s [ 0.546334] raid6: .... xor() 4525 MB/s, rmw enabled [ 0.546335] raid6: using ssse3x2 recovery algorithm [ 0.546433] ACPI: Added _OSI(Module Device) [ 0.546435] ACPI: Added _OSI(Processor Device) [ 0.546435] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.546436] ACPI: Added _OSI(Processor Aggregator Device) [ 0.546667] ACPI: Executed 1 blocks of module-level executable AML code [ 0.551666] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.553080] ACPI : EC: EC started [ 0.553081] ACPI : EC: interrupt blocked [ 0.554165] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC [ 0.554167] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.554169] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions [ 0.554169] ACPI: Interpreter enabled [ 0.554202] ACPI: (supports S0 S3 S4 S5) [ 0.554203] ACPI: Using IOAPIC for interrupt routing [ 0.554378] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.554433] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.554447] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.570033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.570039] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.570231] acpi PNP0A03:00: _OSC: platform does not support [PME] [ 0.570421] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] [ 0.570829] PCI host bridge to bus 0000:00 [ 0.570831] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.570833] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.570834] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.570835] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.570837] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.570838] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.570840] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window] [ 0.570841] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.570849] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 [ 0.570987] pci 0000:00:01.0: [1002:9900] type 00 class 0x030000 [ 0.570996] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] [ 0.571001] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff] [ 0.571006] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff] [ 0.571045] pci 0000:00:01.0: supports D1 D2 [ 0.571131] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300 [ 0.571138] pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff] [ 0.571177] pci 0000:00:01.1: supports D1 D2 [ 0.571308] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400 [ 0.571358] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.571490] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330 [ 0.571511] pci 0000:00:10.0: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit] [ 0.571606] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.571816] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.571885] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601 [ 0.571900] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147] [ 0.571909] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133] [ 0.571917] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127] [ 0.571925] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113] [ 0.571933] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f] [ 0.571942] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4c000-0xfeb4c7ff] [ 0.572076] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.572086] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4b000-0xfeb4bfff] [ 0.572319] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.572389] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.572409] pci 0000:00:12.2: reg 0x10: [mem 0xfeb4a000-0xfeb4a0ff] [ 0.572480] pci 0000:00:12.2: supports D1 D2 [ 0.572482] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.572677] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.572743] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.572883] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.572901] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit] [ 0.572960] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.573012] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.573069] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.573226] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 [ 0.573368] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 [ 0.573463] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 [ 0.573551] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 [ 0.573639] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 [ 0.573734] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 [ 0.573822] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 [ 0.574009] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000 [ 0.574026] pci 0000:03:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit] [ 0.574054] pci 0000:03:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref] [ 0.574107] pci 0000:03:00.0: supports D1 D2 [ 0.574108] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.576522] pci 0000:00:05.0: PCI bridge to [bus 03-0b] [ 0.576537] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.576795] pci 0000:00:14.4: PCI bridge to [bus 0c-12] (subtractive decode) [ 0.576811] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.576815] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.576819] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.576823] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.576827] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.576831] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.576835] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode) [ 0.578958] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.579034] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.579109] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.579182] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.579242] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.579289] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.579345] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.579400] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.579649] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.579716] ACPI : EC: interrupt unblocked [ 0.579735] ACPI : EC: event unblocked [ 0.583430] ACPI : EC: 1 stale EC events cleared [ 0.583443] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.583447] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.584102] vgaarb: setting as boot device: PCI:0000:00:01.0 [ 0.584107] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.584120] vgaarb: loaded [ 0.584122] vgaarb: bridge control possible 0000:00:01.0 [ 0.584422] SCSI subsystem initialized [ 0.584506] libata version 3.00 loaded. [ 0.584510] ACPI: bus type USB registered [ 0.584534] usbcore: registered new interface driver usbfs [ 0.584545] usbcore: registered new interface driver hub [ 0.584565] usbcore: registered new device driver usb [ 0.584664] Registered efivars operations [ 0.590808] PCI: Using ACPI for IRQ routing [ 0.598395] PCI: pci_cache_line_size set to 64 bytes [ 0.598436] e820: reserve RAM buffer [mem 0xae916000-0xafffffff] [ 0.598438] e820: reserve RAM buffer [mem 0xaed30000-0xafffffff] [ 0.598439] e820: reserve RAM buffer [mem 0xaf624000-0xafffffff] [ 0.598440] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff] [ 0.598441] e820: reserve RAM buffer [mem 0x1af000000-0x1afffffff] [ 0.598576] NetLabel: Initializing [ 0.598577] NetLabel: domain hash size = 128 [ 0.598577] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.598591] NetLabel: unlabeled traffic allowed by default [ 0.598738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.598742] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.600880] clocksource: Switched to clocksource hpet [ 0.611263] VFS: Disk quotas dquot_6.6.0 [ 0.611295] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.611420] pnp: PnP ACPI init [ 0.611573] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.611577] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.611960] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.611962] system 00:01: [io 0x040b] has been reserved [ 0.611964] system 00:01: [io 0x04d6] has been reserved [ 0.611965] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.611967] system 00:01: [io 0x0c14] has been reserved [ 0.611968] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 0.611969] system 00:01: [io 0x0c52] has been reserved [ 0.611971] system 00:01: [io 0x0c6c] has been reserved [ 0.611972] system 00:01: [io 0x0c6f] has been reserved [ 0.611974] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.611975] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.611977] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 0.611978] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 0.611979] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 0.611981] system 00:01: [io 0x0800-0x089f] has been reserved [ 0.611982] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.611984] system 00:01: [io 0x0900-0x090f] has been reserved [ 0.611985] system 00:01: [io 0x0910-0x091f] has been reserved [ 0.611987] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 0.611989] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.611991] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.611993] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.611994] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.611996] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.611998] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.612000] system 00:01: [mem 0xff010000-0xffffffff] has been reserved [ 0.612002] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.612038] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.612098] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.612101] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.612147] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.614153] pnp 00:05: Plug and Play ACPI device, IDs SYN2601 PNP0f13 (active) [ 0.614196] pnp 00:06: Plug and Play ACPI device, IDs MSF0001 PNP030b (active) [ 0.614304] system 00:07: [mem 0xb0000000-0xcfffffff] has been reserved [ 0.614308] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.614622] pnp: PnP ACPI: found 8 devices [ 0.623382] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.623399] pci 0000:00:05.0: PCI bridge to [bus 03-0b] [ 0.623403] pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.623408] pci 0000:00:14.4: PCI bridge to [bus 0c-12] [ 0.623420] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.623422] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.623423] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.623424] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.623426] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.623427] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.623429] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window] [ 0.623430] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.623432] pci_bus 0000:0c: resource 4 [io 0x0000-0x03af window] [ 0.623433] pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7 window] [ 0.623435] pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df window] [ 0.623436] pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff window] [ 0.623437] pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.623439] pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.623440] pci_bus 0000:0c: resource 10 [mem 0xd0000000-0xffffffff window] [ 0.623532] NET: Registered protocol family 2 [ 0.623716] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.623930] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.624194] TCP: Hash tables configured (established 65536 bind 65536) [ 0.624246] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.624294] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.624391] NET: Registered protocol family 1 [ 0.624408] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.624762] pci 0000:00:12.0: enabling device (0000 -> 0002) [ 0.625243] PCI: CLS 64 bytes, default 64 [ 0.625309] Trying to unpack rootfs image as initramfs... [ 1.332561] Freeing initrd memory: 50040K [ 1.332565] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.332568] software IO TLB [mem 0xa800e000-0xac00e000] (64MB) mapped at [ffff8800a800e000-ffff8800ac00dfff] [ 1.332615] perf: AMD NB counters detected [ 1.332950] LVT offset 0 assigned for vector 0x400 [ 1.333030] perf: AMD IBS detected (0x000000ff) [ 1.334174] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.336611] zbud: loaded [ 1.340499] Key type asymmetric registered [ 1.340669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.340825] io scheduler noop registered [ 1.340828] io scheduler deadline registered [ 1.340855] io scheduler cfq registered [ 1.341001] io scheduler bfq registered (default) [ 1.341003] BFQ I/O-scheduler: v8r7 (with cgroups support) [ 1.341663] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.341669] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.341719] efifb: probing for efifb [ 1.341734] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k [ 1.341735] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.341735] efifb: scrolling: redraw [ 1.341737] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.344167] Console: switching to colour frame buffer device 128x48 [ 1.346334] fb0: EFI VGA frame buffer device [ 1.346818] ACPI: AC Adapter [ACAD] (on-line) [ 1.346892] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.346895] ACPI: Power Button [PWRB] [ 1.346984] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.347013] ACPI: Lid Switch [LID] [ 1.347057] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.347059] ACPI: Power Button [PWRF] [ 1.348533] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.348535] ACPI: Thermal Zone [TZ00] (0 C) [ 1.348714] GHES: HEST is not enabled! [ 1.348857] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.349346] Linux agpgart interface v0.103 [ 1.353432] brd: module loaded [ 1.353631] ahci 0000:00:11.0: version 3.0 [ 1.353649] ahci 0000:00:11.0: enabling device (0005 -> 0007) [ 1.353898] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xd impl SATA mode [ 1.353901] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs [ 1.354758] scsi host0: ahci [ 1.354912] scsi host1: ahci [ 1.355056] scsi host2: ahci [ 1.355183] scsi host3: ahci [ 1.355249] ata1: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c100 irq 24 [ 1.355250] ata2: DUMMY [ 1.355252] ata3: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c200 irq 24 [ 1.355254] ata4: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c280 irq 24 [ 1.355351] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.371125] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.371167] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.371351] mousedev: PS/2 mouse device common for all mice [ 1.371680] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.371718] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.371794] device-mapper: uevent: version 1.0.3 [ 1.371890] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: XXX@XXX [ 1.372064] ledtrig-cpu: registered to indicate activity on CPUs [ 1.372066] EFI Variables Facility v0.08 2004-May-17 [ 1.378967] [Firmware Bug]: battery: (dis)charge rate invalid. [ 1.379030] ACPI: Battery Slot [BAT1] (battery present) [ 1.379087] Key type dns_resolver registered [ 1.379088] mpls_gso: MPLS GSO support [ 1.379522] microcode: microcode updated early to new patch_level=0x06001119 [ 1.379560] microcode: CPU0: patch_level=0x06001119 [ 1.379566] microcode: CPU1: patch_level=0x06001119 [ 1.379585] microcode: CPU2: patch_level=0x06001119 [ 1.379601] microcode: CPU3: patch_level=0x06001119 [ 1.379677] microcode: Microcode Update Driver: v2.01 <XXX@XXX>, Peter Oruba [ 1.379893] registered taskstats version 1 [ 1.379919] zswap: loaded using pool lzo/zbud [ 1.380566] Btrfs loaded, crc32c=crc32c-generic [ 1.386664] Key type encrypted registered [ 1.386673] ima: No TPM chip found, activating TPM-bypass! [ 1.386842] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.387248] Magic number: 2:323:599 [ 1.387283] serial8250 serial8250: hash matches [ 1.387499] rtc_cmos 00:02: setting system clock to 2018-01-16 20:33:25 UTC (1516134805) [ 1.387503] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.387504] EDD information not available. [ 1.387690] PM: Checking hibernation image partition UUID=HASH_B21-D3AF-E663-0B6F-17FA87E4CC53 [ 1.669570] ata4: SATA link down (SStatus 0 SControl 300) [ 1.829156] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.829198] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.830708] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/133 [ 1.830715] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.832371] ata1.00: configured for UDMA/133 [ 1.832799] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 A50A PQ: 0 ANSI: 5 [ 1.834374] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100 [ 1.838943] ata3.00: configured for UDMA/100 [ 1.846718] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 1.846722] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.846860] sd 0:0:0:0: [sda] Write Protect is off [ 1.846863] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.846910] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.849632] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC00 PQ: 0 ANSI: 5 [ 2.381155] tsc: Refined TSC clocksource calibration: 2295.824 MHz [ 2.381164] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2117cc288f5, max_idle_ns: 440795214337 ns [ 2.465941] psmouse serio1: synaptics: queried max coordinates: x [..5738], y [..4886] [ 2.518147] psmouse serio1: synaptics: queried min coordinates: x [1210..], y [986..] [ 2.535351] sda: sda1 sda2 sda3 sda4 [ 2.536291] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.616633] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00333/0x240000/0xa2400/0x0, board id: 1874, fw id: 1116252 [ 2.652464] random: fast init done [ 2.677261] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.681435] PM: Hibernation image not present or could not be loaded. [ 2.683507] Freeing unused kernel memory: 1440K [ 2.683508] Write protecting the kernel read-only data: 12288k [ 2.683787] Freeing unused kernel memory: 60K [ 2.685098] Freeing unused kernel memory: 416K [ 2.718532] NET: Registered protocol family 10 [ 2.719253] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 2.719284] systemd[1]: Failed to insert module 'ip_tables': Function not implemented [ 2.740607] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.740791] systemd[1]: Detected architecture x86-64. [ 2.740793] systemd[1]: Running in initial RAM disk. [ 2.740802] systemd[1]: No hostname configured. [ 2.740806] systemd[1]: Set hostname to ... [ 2.740827] systemd[1]: Initializing machine ID from random generator. [ 2.799770] systemd[1]: Listening on udev Kernel Socket. [ 2.799878] systemd[1]: Listening on Journal Audit Socket. [ 2.799895] systemd[1]: Reached target Encrypted Volumes. [ 2.799911] systemd[1]: Reached target Swap. [ 3.072274] RPC: Registered named UNIX socket transport module. [ 3.072276] RPC: Registered udp transport module. [ 3.072276] RPC: Registered tcp transport module. [ 3.072277] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.343477] wmi: Mapper loaded [ 3.344453] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.345591] acpi device:2f: registered as cooling_device4 [ 3.345717] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input8 [ 3.356787] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 3.379457] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.384636] QUIRK: Enable AMD PLL fix [ 3.384659] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 3.384668] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 3.384870] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608 [ 3.385396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.385399] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.385400] usb usb1: Product: xHCI Host Controller [ 3.385402] usb usb1: Manufacturer: Linux 4.9.60-nrj-desktop-1rosa-x86_64 xhci-hcd [ 3.385404] usb usb1: SerialNumber: ... [ 3.385623] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.385624] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 3.385632] hub 1-0:1.0: USB hub found [ 3.385650] hub 1-0:1.0: 2 ports detected [ 3.385822] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 3.385827] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 3.386456] ehci-pci: EHCI PCI platform driver [ 3.388285] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.388318] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.388320] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.388322] usb usb2: Product: xHCI Host Controller [ 3.388323] usb usb2: Manufacturer: Linux 4.9.60-nrj-desktop-1rosa-x86_64 xhci-hcd [ 3.388324] usb usb2: SerialNumber: ... [ 3.388698] hub 2-0:1.0: USB hub found [ 3.388709] hub 2-0:1.0: 2 ports detected [ 3.389324] ehci-pci 0000:00:12.2: EHCI Host Controller [ 3.389331] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 3.389336] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.389345] ehci-pci 0000:00:12.2: debug port 1 [ 3.389397] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4a000 [ 3.390238] clocksource: Switched to clocksource tsc [ 3.394351] [drm] Initialized [ 3.396106] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 3.396183] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.396186] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.396188] usb usb3: Product: EHCI Host Controller [ 3.396190] usb usb3: Manufacturer: Linux 4.9.60-nrj-desktop-1rosa-x86_64 ehci_hcd [ 3.396191] usb usb3: SerialNumber: ... [ 3.396457] hub 3-0:1.0: USB hub found [ 3.396466] hub 3-0:1.0: 5 ports detected [ 3.397651] ohci-pci: OHCI PCI platform driver [ 3.397901] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 3.397910] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 3.397947] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4b000 [ 3.404432] AVX version of gcm_enc/dec engaged. [ 3.404434] AES CTR mode by8 optimization enabled [ 3.418091] sr 2:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.418095] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.418382] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.453219] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.453221] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.453223] usb usb4: Product: OHCI PCI host controller [ 3.453225] usb usb4: Manufacturer: Linux 4.9.60-nrj-desktop-1rosa-x86_64 ohci_hcd [ 3.453226] usb usb4: SerialNumber: ... [ 3.453639] hub 4-0:1.0: USB hub found [ 3.453695] hub 4-0:1.0: 5 ports detected [ 3.488687] [drm] radeon kernel modesetting enabled. [ 3.490917] AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 3.490919] AMD IOMMUv2 functionality not available on this system [ 3.500221] CRAT table not found [ 3.500222] Finished initializing topology ret=0 [ 3.500258] kfd kfd: Initialized module [ 3.500606] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 3.500607] fb: switching to radeondrmfb from EFI VGA [ 3.500652] Console: switching to colour dummy device 80x25 [ 3.501516] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9900 0x144D:0xC0DD 0x00). [ 3.501530] [drm] register mmio base: 0xFEB00000 [ 3.501531] [drm] register mmio size: 262144 [ 3.501535] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9900, size 20480 [ 3.501547] ATOM BIOS: 113 [ 3.501613] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 3.501614] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF [ 3.501618] [drm] Detected VRAM RAM=512M, BAR=256M [ 3.501619] [drm] RAM width 64bits DDR [ 3.501693] [TTM] Zone kernel: Available graphics memory: 2781464 kiB [ 3.501694] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.501695] [TTM] Initializing pool allocator [ 3.501700] [TTM] Initializing DMA pool allocator [ 3.501723] [drm] radeon: 512M of VRAM memory ready [ 3.501724] [drm] radeon: 1024M of GTT memory ready. [ 3.501743] [drm] Loading ARUBA Microcode [ 3.501807] [drm] Internal thermal controller without fan control [ 3.502012] [drm] radeon: dpm initialized [ 3.504406] [drm] Found VCE firmware/feedback version 50.0.1 / 17! [ 3.504415] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.535548] [drm] PCIE GART of 1024M enabled (table at 0x00000000001D6000). [ 3.535698] radeon 0000:00:01.0: WB enabled [ 3.535702] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801a0489c00 [ 3.536108] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001835a18 [ 3.556295] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff8801a0489c18 [ 3.556297] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff8801a0489c1c [ 3.556298] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801a0489c04 [ 3.556300] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801a0489c08 [ 3.556302] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801a0489c0c [ 3.556303] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8801a0489c10 [ 3.556306] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.556307] [drm] Driver supports precise vblank timestamp query. [ 3.556309] radeon 0000:00:01.0: radeon: MSI limited to 32-bit [ 3.556359] radeon 0000:00:01.0: radeon: using MSI. [ 3.556383] [drm] radeon: irq initialized. [ 3.575129] [drm] ring test on 0 succeeded in 2 usecs [ 3.575135] [drm] ring test on 3 succeeded in 3 usecs [ 3.575141] [drm] ring test on 4 succeeded in 3 usecs [ 3.621194] [drm] ring test on 5 succeeded in 1 usecs [ 3.641212] [drm] UVD initialized successfully. [ 3.751291] [drm] ring test on 6 succeeded in 16 usecs [ 3.751302] [drm] ring test on 7 succeeded in 3 usecs [ 3.751304] [drm] VCE initialized successfully. [ 3.751889] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.751926] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.751964] [drm] ib test on ring 4 succeeded in 0 usecs [ 3.851893] psmouse serio1: synaptics: queried max coordinates: x [..5738], y [..4886] [ 3.899329] usb 4-1: new low-speed USB device number 2 using ohci-pci [ 3.909224] psmouse serio1: synaptics: queried min coordinates: x [1210..], y [986..] [ 3.941041] PM: Starting manual resume from disk [ 3.941044] PM: Hibernation image partition 8:3 present [ 3.941045] PM: Looking for hibernation image. [ 4.007332] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00333/0x240000/0xa2400/0x0, board id: 1874, fw id: 1116252 [ 4.052405] usb 4-1: New USB device found, idVendor=093a, idProduct=2510 [ 4.052408] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.052411] usb 4-1: Product: USB Optical Mouse [ 4.052412] usb 4-1: Manufacturer: PixArt [ 4.063154] hidraw: raw HID events driver (C) Jiri Kosina [ 4.070410] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 4.070512] PM: Image not found (code -22) [ 4.070514] PM: Hibernation image not present or could not be loaded. [ 4.071796] usbcore: registered new interface driver usbhid [ 4.071798] usbhid: USB HID core driver [ 4.073208] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:093A:2510.0001/input/input9 [ 4.073433] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-1/input0 [ 4.277487] [drm] ib test on ring 5 succeeded [ 4.437376] usb 3-2: new high-speed USB device number 3 using ehci-pci [ 4.557809] usb 3-2: New USB device found, idVendor=03f0, idProduct=d811 [ 4.557812] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.557814] usb 3-2: Product: DeskJet 4530 series [ 4.557815] usb 3-2: Manufacturer: HP [ 4.557817] usb 3-2: SerialNumber: ... [ 4.662382] usb 3-3: new high-speed USB device number 4 using ehci-pci [ 4.782671] usb 3-3: New USB device found, idVendor=0bda, idProduct=0129 [ 4.782674] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.782676] usb 3-3: Product: USB2.0-CRW [ 4.782677] usb 3-3: Manufacturer: Generic [ 4.782679] usb 3-3: SerialNumber: ... [ 4.791714] usbcore: registered new interface driver rtsx_usb [ 4.805429] [drm] ib test on ring 6 succeeded [ 5.070405] usb 4-4: new full-speed USB device number 3 using ohci-pci [ 5.225665] usb 4-4: New USB device found, idVendor=0cf3, idProduct=3004 [ 5.225669] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.225671] usb 4-4: Product: Bluetooth USB Host Controller [ 5.225672] usb 4-4: Manufacturer: Atheros Communications [ 5.225674] usb 4-4: SerialNumber: ... [ 5.309552] [drm] ib test on ring 7 succeeded [ 5.313299] [drm] radeon atom DIG backlight initialized [ 5.313301] [drm] Radeon Display Connectors [ 5.313301] [drm] Connector 0: [ 5.313302] [drm] eDP-1 [ 5.313303] [drm] HPD1 [ 5.313305] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 5.313305] [drm] Encoders: [ 5.313306] [drm] LCD1: INTERNAL_UNIPHY2 [ 5.313307] [drm] Connector 1: [ 5.313307] [drm] VGA-1 [ 5.313308] [drm] HPD2 [ 5.313309] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 5.313310] [drm] Encoders: [ 5.313310] [drm] CRT1: INTERNAL_UNIPHY2 [ 5.313311] [drm] CRT1: NUTMEG [ 5.313312] [drm] Connector 2: [ 5.313312] [drm] HDMI-A-1 [ 5.313313] [drm] HPD3 [ 5.313314] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c [ 5.313315] [drm] Encoders: [ 5.313316] [drm] DFP1: INTERNAL_UNIPHY [ 5.773374] usb 3-5: new high-speed USB device number 6 using ehci-pci [ 5.901843] usb 3-5: New USB device found, idVendor=2232, idProduct=1028 [ 5.901847] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.901849] usb 3-5: Product: WebCam SC-03FFL11939N [ 5.901850] usb 3-5: Manufacturer: Image Processor [ 6.451195] [drm] fb mappable at 0xD03DA000 [ 6.451197] [drm] vram apper at 0xD0000000 [ 6.451198] [drm] size 4325376 [ 6.451199] [drm] fb depth is 24 [ 6.451200] [drm] pitch is 5632 [ 6.451444] fbcon: radeondrmfb (fb0) is primary device [ 8.589958] Console: switching to colour frame buffer device 170x48 [ 8.593223] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 8.599558] [drm] Initialized radeon 2.49.0 20080528 for 0000:00:01.0 on minor 0 [ 8.615897] audit_printk_skb: 12 callbacks suppressed [ 8.643738] random: crng init done [ 9.635148] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 10.044896] systemd-journald[164]: Received SIGTERM from PID 1 (systemd). [ 10.211220] systemd: 19 output lines suppressed due to ratelimiting [ 10.602651] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 10.811954] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 10.881822] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 13.442080] EXT4-fs (sda2): re-mounted. Opts: (null) [ 13.676461] audit_printk_skb: 108 callbacks suppressed [ 13.743965] systemd-journald[612]: Received request to flush runtime journal from PID 1 [ 15.564715] acpi_cpufreq: overriding BIOS provided _PSD data [ 15.671726] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 15.671729] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 15.672003] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 15.690198] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.705228] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 15.705942] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x14 [ 15.705947] sp5100_tco: I/O address 0x0cd6 already in use [ 15.940669] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002) [ 15.940848] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 15.970000] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10 [ 15.979956] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 15.979961] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.979963] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 15.979965] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 15.979967] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 15.979970] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x19 [ 15.979972] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18 [ 15.991227] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [ 15.991325] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 16.663422] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xD811 [ 16.663472] usbcore: registered new interface driver usblp [ 16.770684] Bluetooth: Core ver 2.22 [ 16.770705] NET: Registered protocol family 31 [ 16.770706] Bluetooth: HCI device and connection manager initialized [ 16.770711] Bluetooth: HCI socket layer initialized [ 16.770713] Bluetooth: L2CAP socket layer initialized [ 16.770721] Bluetooth: SCO socket layer initialized [ 16.907909] usbcore: registered new interface driver btusb [ 17.318631] media: Linux media interface: v0.10 [ 17.407842] Linux video capture interface: v2.00 [ 17.412487] ath9k 0000:03:00.0: enabling device (0000 -> 0002) [ 17.412651] ath: phy0: Set BT/WLAN RX diversity capability [ 17.417219] ath: phy0: timeout (1000 us) on reg 0x15f18: 0x00000000 & 0x00000007 != 0x00000004 [ 17.419195] ath: phy0: ASPM enabled: 0x42 [ 17.419198] ath: EEPROM regdomain: 0x65 [ 17.419199] ath: EEPROM indicates we should expect a direct regpair map [ 17.419202] ath: Country alpha2 being used: 00 [ 17.419203] ath: Regpair used: 0x65 [ 17.448659] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 17.449359] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90002680000, irq=17 [ 17.497802] kvm: Nested Virtualization enabled [ 17.497806] kvm: Nested Paging enabled [ 17.535295] usb 4-4: USB disconnect, device number 3 [ 17.536390] usbcore: registered new interface driver ath3k [ 17.544588] EDAC MC: Ver: 3.0.0 [ 17.571347] uvcvideo: Found UVC 1.00 device WebCam SC-03FFL11939N (2232:1028) [ 17.572046] EDAC amd64: DRAM ECC disabled. [ 17.572057] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 17.581972] EDAC amd64: DRAM ECC disabled. [ 17.581979] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 17.589960] uvcvideo 3-5:1.0: Entity type for entity Processing 3 was not initialized! [ 17.589965] uvcvideo 3-5:1.0: Entity type for entity Extension 2 was not initialized! [ 17.589968] uvcvideo 3-5:1.0: Entity type for entity Camera 1 was not initialized! [ 17.590873] input: WebCam SC-03FFL11939N as /devices/pci0000:00/0000:00:12.2/usb3/3-5/3-5:1.0/input/input13 [ 17.590975] usbcore: registered new interface driver uvcvideo [ 17.590976] USB Video Class driver (1.1.1) [ 17.630352] Adding 4095996k swap on /dev/sda3. Priority:-1 extents:1 across:4095996k FS [ 18.200023] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 19.580925] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 25.224729] usb 4-4: new full-speed USB device number 4 using ohci-pci [ 26.178036] audit_printk_skb: 45 callbacks suppressed [ 30.414058] usb 4-4: device descriptor read/64, error -110 [ 31.621537] audit_printk_skb: 12 callbacks suppressed [ 34.007043] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 34.220556] Netfilter messages via NETLINK v0.30. [ 34.225277] ctnetlink v0.93: registering with nfnetlink. [ 34.298514] usblp0: removed [ 34.299447] usblp 3-2:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xD811 [ 36.666158] audit_printk_skb: 81 callbacks suppressed [ 36.698107] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 36.712917] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 37.422811] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 38.275333] NET: Registered protocol family 17 [ 38.683342] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 42.054669] audit_printk_skb: 297 callbacks suppressed [ 47.088105] usb 4-4: device not accepting address 4, error -62 [ 47.214150] usb 4-4: new full-speed USB device number 5 using ohci-pci [ 47.369307] usb 4-4: New USB device found, idVendor=0cf3, idProduct=3004 [ 47.369312] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 47.369314] usb 4-4: Product: Bluetooth USB Host Controller [ 47.369317] usb 4-4: Manufacturer: Atheros Communications [ 47.369319] usb 4-4: SerialNumber: ... [ 47.632718] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 47.632721] Bluetooth: BNEP filters: protocol multicast [ 47.632726] Bluetooth: BNEP socket layer initialized [ 64.705358] wlp3s0: authenticate with XXX [ 64.719480] wlp3s0: send auth to XXX (try 1/3) [ 64.723344] wlp3s0: authenticated [ 64.724197] wlp3s0: associate with XXX (try 1/3) [ 64.728365] wlp3s0: RX AssocResp from XXX (capab=0x411 status=0 aid=1) [ 64.728469] wlp3s0: associated [ 64.728541] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 69.094504] Bluetooth: RFCOMM TTY layer initialized [ 69.094513] Bluetooth: RFCOMM socket layer initialized [ 69.094525] Bluetooth: RFCOMM ver 1.11 [ 69.601232] audit_printk_skb: 3 callbacks suppressed [ 84.999745] fuse init (API version 7.26) [ 1418.633059] Uniform Multi-Platform E-IDE driver [ 1418.642661] ide-cd driver 5.00 [ 1418.655823] ide-gd driver 1.18 [ 1418.693032] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 1418.918601] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1418.918683] sr 2:0:0:0: Attached scsi generic sg1 type 5