[ 0.000000] microcode: microcode updated early to revision 0xa0, date = 2020-07-30 [ 0.000000] Linux version 5.4.0-70-generic (XXX@XXX) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #78-Ubuntu SMP Fri Mar 19 13:29:52 UTC 2021 (Ubuntu 5.4.0-70.78-generic 5.4.94) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-70-generic root=UUID=HASH_6CE-D2D3-00DF-1E65-EFB25E86CED3 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000029f23fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000029f24000-0x0000000029f24fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000029f25000-0x0000000029f7afff] usable [ 0.000000] BIOS-e820: [mem 0x0000000029f7b000-0x0000000029f7bfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000029f7c000-0x0000000038a2efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000038a2f000-0x000000003b18efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003b18f000-0x000000003bf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003bf7f000-0x000000003bffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003bfff000-0x000000003bffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003c000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fc800000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed17fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff400000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002b2bfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by INSYDE Corp. [ 0.000000] efi: ACPI=0x3bffe000 ACPI 2.0=0x3bffe014 TPMFinalLog=0x3bf52000 ESRT=0x3a393a98 SMBIOS=0x39bf0000 SMBIOS 3.0=0x39bee000 MEMATTR=0x2802b018 TPMEventLog=0x27314018 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: HP HP Laptop 15-da3xxx/86C1, BIOS F.33 07/31/2020 [ 0.000000] tsc: Detected 1200.000 MHz processor [ 0.000013] tsc: Detected 1190.400 MHz TSC [ 0.000013] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000016] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000027] last_pfn = 0x2b2c00 max_arch_pfn = 0x400000000 [ 0.000033] MTRR default type: write-back [ 0.000034] MTRR fixed ranges enabled: [ 0.000036] 00000-9FFFF write-back [ 0.000037] A0000-BFFFF uncachable [ 0.000038] C0000-FFFFF write-protect [ 0.000039] MTRR variable ranges enabled: [ 0.000042] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000043] 1 base 0060000000 mask 7FE0000000 uncachable [ 0.000044] 2 base 0050000000 mask 7FF0000000 uncachable [ 0.000046] 3 base 0048000000 mask 7FF8000000 uncachable [ 0.000047] 4 base 2000000000 mask 6000000000 uncachable [ 0.000048] 5 base 1000000000 mask 7000000000 uncachable [ 0.000049] 6 base 0800000000 mask 7800000000 uncachable [ 0.000050] 7 base 0400000000 mask 7C00000000 uncachable [ 0.000051] 8 base 4000000000 mask 4000000000 uncachable [ 0.000052] 9 disabled [ 0.000900] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001216] last_pfn = 0x3c000 max_arch_pfn = 0x400000000 [ 0.015665] esrt: Reserving ESRT space from 0x000000003a393a98 to 0x000000003a393ad0. [ 0.015684] check: Scanning 1 areas for low memory corruption [ 0.015691] Using GB pages for direct mapping [ 0.016575] secureboot: Secure boot disabled [ 0.016577] RAMDISK: [mem 0x21b02000-0x26dd7fff] [ 0.016595] ACPI: Early table checksum verification disabled [ 0.016599] ACPI: RSDP 0x000000003BFFE014 000024 (v02 HPQOEM) [ 0.016604] ACPI: XSDT 0x000000003BFCF188 00012C (v01 HPQOEM SLIC-MPC 00000002 HP 01000013) [ 0.016612] ACPI: FACP 0x000000003BFD1000 00010C (v05 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.016620] ACPI: DSDT 0x000000003BF91000 03BF33 (v02 HPQOEM 85F3 00000002 HP 00040000) [ 0.016624] ACPI: FACS 0x000000003BF2F000 000040 [ 0.016628] ACPI: UEFI 0x000000003BF7E000 000236 (v01 HPQOEM 85F3 00000001 HP 00040000) [ 0.016632] ACPI: SSDT 0x000000003BFF9000 003CE7 (v02 HPQOEM 85F3 00001000 HP 00040000) [ 0.016636] ACPI: SSDT 0x000000003BFF7000 001B60 (v02 HPQOEM 85F3 00003000 HP 00040000) [ 0.016640] ACPI: SSDT 0x000000003BFF6000 000100 (v02 HPQOEM 85F3 00003000 HP 00040000) [ 0.016644] ACPI: SSDT 0x000000003BFF2000 003389 (v02 HPQOEM 85F3 00003000 HP 00040000) [ 0.016648] ACPI: SSDT 0x000000003BFE6000 00B259 (v02 HPQOEM 85F3 00001000 HP 00040000) [ 0.016652] ACPI: SSDT 0x000000003BFE5000 000781 (v01 HPQOEM 85F3 00001000 HP 00040000) [ 0.016656] ACPI: TPM2 0x000000003BFE4000 000034 (v04 HPQOEM 85F3 00000002 HP 00040000) [ 0.016660] ACPI: SSDT 0x000000003BFE3000 000179 (v01 HPQOEM 85F3 00001000 HP 00040000) [ 0.016664] ACPI: SSDT 0x000000003BFDB000 00787C (v01 HPQOEM 85F3 00001000 HP 00040000) [ 0.016668] ACPI: LPIT 0x000000003BFD9000 000094 (v01 HPQOEM 85F3 00000002 HP 00040000) [ 0.016672] ACPI: WSMT 0x000000003BFD8000 000028 (v01 HPQOEM 85F3 00000002 HP 00040000) [ 0.016676] ACPI: SSDT 0x000000003BFD7000 000B70 (v02 HPQOEM 85F3 00001000 HP 00040000) [ 0.016680] ACPI: DBGP 0x000000003BFD6000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.016684] ACPI: DBG2 0x000000003BFD5000 000054 (v00 HPQOEM 85F3 00000002 HP 00040000) [ 0.016688] ACPI: SSDT 0x000000003BFD4000 0007EA (v02 HPQOEM 85F3 00001000 HP 00040000) [ 0.016692] ACPI: NHLT 0x000000003BFD3000 0002DF (v00 HPQOEM 85F3 00000002 HP 00040000) [ 0.016696] ACPI: ECDT 0x000000003BFD2000 000069 (v01 HPQOEM 85F3 00000002 HP 00040000) [ 0.016700] ACPI: HPET 0x000000003BFD0000 000038 (v01 HPQOEM 85F3 00000002 HP 00040000) [ 0.016703] ACPI: APIC 0x000000003BFFD000 00012C (v03 HPQOEM 85F3 00000002 HP 00040000) [ 0.016707] ACPI: MCFG 0x000000003BFCE000 00003C (v01 HPQOEM 85F3 00000002 HP 00040000) [ 0.016711] ACPI: SSDT 0x000000003BF90000 0000F5 (v01 HPQOEM 85F3 00000002 HP 00040000) [ 0.016715] ACPI: SSDT 0x000000003BF8F000 000CA8 (v02 HPQOEM 85F3 00000002 HP 00040000) [ 0.016719] ACPI: SSDT 0x000000003BF8D000 00005C (v02 HPQOEM 85F3 00001000 HP 00040000) [ 0.016723] ACPI: SSDT 0x000000003BF8C000 000976 (v02 HPQOEM 85F3 00001000 HP 00040000) [ 0.016727] ACPI: DMAR 0x000000003BF8E000 0000A8 (v02 HPQOEM 85F3 00000002 HP 00040000) [ 0.016731] ACPI: SSDT 0x000000003BF8B000 000164 (v01 HPQOEM 85F3 00001000 HP 00040000) [ 0.016735] ACPI: SSDT 0x000000003BF8A000 00082C (v02 HPQOEM 85F3 00003000 HP 00040000) [ 0.016739] ACPI: UEFI 0x000000003B79D000 00063A (v01 HPQOEM 85F3 00000000 HP 00040000) [ 0.016743] ACPI: UEFI 0x000000003B79C000 00005C (v01 HPQOEM 85F3 00000000 HP 00040000) [ 0.016747] ACPI: FPDT 0x000000003BF89000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.016751] ACPI: BGRT 0x000000003BFCD000 000038 (v01 HPQOEM 85F3 00000001 HP 00040000) [ 0.016761] ACPI: Local APIC address 0xfee00000 [ 0.017001] No NUMA configuration found [ 0.017003] Faking a node at [mem 0x0000000000000000-0x00000002b2bfffff] [ 0.017013] NODE_DATA(0) allocated [mem 0x2b2bd5000-0x2b2bfffff] [ 0.017359] Zone ranges: [ 0.017361] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017362] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.017364] Normal [mem 0x0000000100000000-0x00000002b2bfffff] [ 0.017365] Device empty [ 0.017366] Movable zone start for each node [ 0.017372] Early memory node ranges [ 0.017374] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.017375] node 0: [mem 0x0000000000100000-0x0000000029f23fff] [ 0.017376] node 0: [mem 0x0000000029f25000-0x0000000029f7afff] [ 0.017377] node 0: [mem 0x0000000029f7c000-0x0000000038a2efff] [ 0.017378] node 0: [mem 0x000000003bfff000-0x000000003bffffff] [ 0.017379] node 0: [mem 0x0000000100000000-0x00000002b2bfffff] [ 0.017873] Zeroed struct page in unavailable ranges: 51764 pages [ 0.017875] Initmem setup node 0 [mem 0x0000000000001000-0x00000002b2bfffff] [ 0.017877] On node 0 totalpages: 2012620 [ 0.017879] DMA zone: 64 pages used for memmap [ 0.017880] DMA zone: 21 pages reserved [ 0.017881] DMA zone: 3998 pages, LIFO batch:0 [ 0.017939] DMA32 zone: 3561 pages used for memmap [ 0.017940] DMA32 zone: 227886 pages, LIFO batch:63 [ 0.025553] Normal zone: 27824 pages used for memmap [ 0.025554] Normal zone: 1780736 pages, LIFO batch:63 [ 0.050018] Reserving Intel graphics memory at [mem 0x49800000-0x4d3fffff] [ 0.050333] ACPI: PM-Timer IO Port: 0x1808 [ 0.050336] ACPI: Local APIC address 0xfee00000 [ 0.050346] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.050347] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.050348] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.050349] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.050349] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.050350] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.050351] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.050352] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.050353] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.050354] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.050354] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.050355] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.050356] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.050357] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.050358] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.050359] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.050396] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.050399] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.050401] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.050403] ACPI: IRQ0 used by override. [ 0.050404] ACPI: IRQ9 used by override. [ 0.050407] Using ACPI (MADT) for SMP configuration information [ 0.050409] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.050421] e820: update [mem 0x273e4000-0x273edfff] usable ==> reserved [ 0.050433] TSC deadline timer available [ 0.050435] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.050465] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.050467] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.050470] PM: Registered nosave memory: [mem 0x273e4000-0x273edfff] [ 0.050472] PM: Registered nosave memory: [mem 0x29f24000-0x29f24fff] [ 0.050475] PM: Registered nosave memory: [mem 0x29f7b000-0x29f7bfff] [ 0.050477] PM: Registered nosave memory: [mem 0x38a2f000-0x3b18efff] [ 0.050478] PM: Registered nosave memory: [mem 0x3b18f000-0x3bf7efff] [ 0.050479] PM: Registered nosave memory: [mem 0x3bf7f000-0x3bffefff] [ 0.050481] PM: Registered nosave memory: [mem 0x3c000000-0xcfffffff] [ 0.050482] PM: Registered nosave memory: [mem 0xd0000000-0xfc7fffff] [ 0.050482] PM: Registered nosave memory: [mem 0xfc800000-0xfe7fffff] [ 0.050483] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff] [ 0.050484] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.050485] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.050486] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.050486] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.050487] PM: Registered nosave memory: [mem 0xfed10000-0xfed17fff] [ 0.050488] PM: Registered nosave memory: [mem 0xfed18000-0xfed1ffff] [ 0.050489] PM: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.050489] PM: Registered nosave memory: [mem 0xfed80000-0xfed9ffff] [ 0.050490] PM: Registered nosave memory: [mem 0xfeda0000-0xfeda1fff] [ 0.050491] PM: Registered nosave memory: [mem 0xfeda2000-0xfedfffff] [ 0.050492] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.050492] PM: Registered nosave memory: [mem 0xfee01000-0xff3fffff] [ 0.050493] PM: Registered nosave memory: [mem 0xff400000-0xffffffff] [ 0.050496] [mem 0xd0000000-0xfc7fffff] available for PCI devices [ 0.050497] Booting paravirtualized kernel on bare hardware [ 0.050501] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.050509] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.050792] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288 [ 0.050801] pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152 [ 0.050802] pcpu-alloc: [0] 0 1 2 3 [ 0.050839] Built 1 zonelists, mobility grouping on. Total pages: 1981150 [ 0.050840] Policy zone: Normal [ 0.050842] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-70-generic root=UUID=HASH_6CE-D2D3-00DF-1E65-EFB25E86CED3 ro quiet splash [ 0.051624] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.051949] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.052017] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.057464] Calgary: detecting Calgary via BIOS EBDA area [ 0.057465] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.079577] Memory: 7693720K/8050480K available (14339K kernel code, 2400K rwdata, 5008K rodata, 2732K init, 4972K bss, 356760K reserved, 0K cma-reserved) [ 0.079585] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.079760] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079777] ftrace: allocating 44568 entries in 175 pages [ 0.108526] rcu: Hierarchical RCU implementation. [ 0.108528] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.108530] Tasks RCU enabled. [ 0.108531] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.108532] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.112933] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.113445] random: crng done (trusting CPU's manufacturer) [ 0.113483] Console: colour dummy device 80x25 [ 0.113488] printk: console [tty0] enabled [ 0.113510] ACPI: Core revision 20190816 [ 0.114172] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.114278] APIC: Switch to symmetric I/O mode setup [ 0.114281] DMAR: Host address width 39 [ 0.114283] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.114290] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 49e2ff0505e [ 0.114291] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.114298] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.114300] DMAR: RMRR base: 0x0000003afc1000 end: 0x0000003afe0fff [ 0.114302] DMAR: RMRR base: 0x00000049000000 end: 0x0000004d3fffff [ 0.114304] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.114305] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.114306] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.114307] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.115999] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.116000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.120612] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.138232] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1128af0325d, max_idle_ns: 440795261011 ns [ 0.138240] Calibrating delay loop (skipped), value calculated using timer frequency.. 2380.80 BogoMIPS (lpj=4761600) [ 0.138244] pid_max: default: 32768 minimum: 301 [ 0.142327] LSM: Security Framework initializing [ 0.142344] Yama: becoming mindful. [ 0.142382] AppArmor: AppArmor initialized [ 0.142447] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.142463] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.142485] *** VALIDATE tmpfs *** [ 0.142712] *** VALIDATE proc *** [ 0.142803] *** VALIDATE cgroup1 *** [ 0.142805] *** VALIDATE cgroup2 *** [ 0.142869] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.142899] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.142946] process: using mwait in idle threads [ 0.142949] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.142950] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.142956] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.142959] Spectre V2 : Mitigation: Enhanced IBRS [ 0.142959] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.142961] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.142963] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.143465] Freeing SMP alternatives memory: 40K [ 0.150390] smpboot: CPU0: Intel(R) Core(TM) i3-1005G1 CPU @ 1.20GHz (family: 0x6, model: 0x7e, stepping: 0x5) [ 0.150564] Performance Events: PEBS fmt4+-baseline, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.150573] ... version: 5 [ 0.150574] ... bit width: 48 [ 0.150575] ... generic registers: 8 [ 0.150576] ... value mask: 0000ffffffffffff [ 0.150576] ... max period: 00007fffffffffff [ 0.150577] ... fixed-purpose events: 4 [ 0.150578] ... event mask: 0000000f000000ff [ 0.150633] rcu: Hierarchical SRCU implementation. [ 0.151933] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.152011] smp: Bringing up secondary CPUs ... [ 0.152132] x86: Booting SMP configuration: [ 0.152133] .... node #0, CPUs: #1 #2 #3 [ 0.158661] smp: Brought up 1 node, 4 CPUs [ 0.158661] smpboot: Max logical packages: 1 [ 0.158661] smpboot: Total of 4 processors activated (9523.20 BogoMIPS) [ 0.160895] devtmpfs: initialized [ 0.160895] x86/mm: Memory block size: 128MB [ 0.162889] PM: Registering ACPI NVS region [mem 0x29f24000-0x29f24fff] (4096 bytes) [ 0.162889] PM: Registering ACPI NVS region [mem 0x3b18f000-0x3bf7efff] (14614528 bytes) [ 0.162889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.162889] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.162889] pinctrl core: initialized pinctrl subsystem [ 0.162889] PM: RTC time: 13:44:08, date: 2021-04-07 [ 0.162889] NET: Registered protocol family 16 [ 0.162889] EISA bus registered [ 0.162889] cpuidle: using governor ladder [ 0.162889] cpuidle: using governor menu [ 0.162889] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.162889] ACPI: bus type PCI registered [ 0.162889] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.162889] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.162889] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 0.162889] PCI: Using configuration type 1 for base access [ 0.162907] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.166740] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.166740] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.166740] ACPI: Added _OSI(Module Device) [ 0.166740] ACPI: Added _OSI(Processor Device) [ 0.166740] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.166740] ACPI: Added _OSI(Processor Aggregator Device) [ 0.166740] ACPI: Added _OSI(Linux-Dell-Video) [ 0.166740] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.166740] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.272964] ACPI: 17 ACPI AML tables successfully acquired and loaded [ 0.276088] ACPI: EC: EC started [ 0.276089] ACPI: EC: interrupt blocked [ 0.282980] ACPI: \: Used as first EC [ 0.282982] ACPI: \: GPE=0x6e, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.282983] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.295843] ACPI: Dynamic OEM Table Load: [ 0.295862] ACPI: SSDT 0xFFFF9313E93F7800 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160422) [ 0.298280] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.300984] ACPI: Dynamic OEM Table Load: [ 0.300995] ACPI: SSDT 0xFFFF9313E8C25400 000386 (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.303495] ACPI: Dynamic OEM Table Load: [ 0.303505] ACPI: SSDT 0xFFFF9313E8C27C00 000371 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.306071] ACPI: Dynamic OEM Table Load: [ 0.306079] ACPI: SSDT 0xFFFF9313E93AE400 00012C (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.308418] ACPI: Dynamic OEM Table Load: [ 0.308430] ACPI: SSDT 0xFFFF9313E93B4000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160422) [ 0.311272] ACPI: Dynamic OEM Table Load: [ 0.311282] ACPI: SSDT 0xFFFF9313E93B3800 0005FC (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.313957] ACPI: Dynamic OEM Table Load: [ 0.313967] ACPI: SSDT 0xFFFF9313E8FBCC00 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.316628] ACPI: Dynamic OEM Table Load: [ 0.316638] ACPI: SSDT 0xFFFF9313E9863000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160422) [ 0.320189] ACPI: Dynamic OEM Table Load: [ 0.320199] ACPI: SSDT 0xFFFF9313E8FBDC00 00030A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.325845] ACPI: Interpreter enabled [ 0.325922] ACPI: (supports S0 S3 S4 S5) [ 0.325923] ACPI: Using IOAPIC for interrupt routing [ 0.325984] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.328073] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.342194] ACPI: Power Resource [PCRP] (on) [ 0.342258] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.DGPV], AE_NOT_FOUND (20190816/psargs-330) [ 0.342272] fbcon: Taking over console [ 0.342281] No Local Variables are initialized for Method [_ON_] [ 0.342283] No Arguments are initialized for method [_ON_] [ 0.342285] ACPI Error: Aborting method \_SB.PCI0.RP05.PCRP._ON due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 0.352789] ACPI: Power Resource [V0PR] (on) [ 0.353050] ACPI: Power Resource [V1PR] (on) [ 0.353296] ACPI: Power Resource [V2PR] (on) [ 0.361341] ACPI: Power Resource [WRST] (on) [ 0.361698] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.369143] ACPI: Power Resource [TBT0] (on) [ 0.369232] ACPI: Power Resource [TBT1] (on) [ 0.385569] ACPI: Power Resource [FN00] (off) [ 0.385711] ACPI: Power Resource [FN01] (off) [ 0.385852] ACPI: Power Resource [FN02] (off) [ 0.385987] ACPI: Power Resource [FN03] (off) [ 0.386126] ACPI: Power Resource [FN04] (off) [ 0.387212] ACPI: Power Resource [PIN] (off) [ 0.388027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.388034] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.388464] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.388853] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.388854] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.394241] PCI host bridge to bus 0000:00 [ 0.394244] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.394246] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.394247] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.394248] pci_bus 0000:00: root bus resource [mem 0x4d400000-0xbfffffff window] [ 0.394250] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.394251] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.394269] pci 0000:00:00.0: [8086:8a02] type 00 class 0x060000 [ 0.396768] pci 0000:00:02.0: [8086:8a56] type 00 class 0x030000 [ 0.396785] pci 0000:00:02.0: reg 0x10: [mem 0x6000000000-0x6000ffffff 64bit] [ 0.396794] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.396799] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.396823] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.398890] pci 0000:00:04.0: [8086:8a03] type 00 class 0x118000 [ 0.398920] pci 0000:00:04.0: reg 0x10: [mem 0x6001100000-0x600110ffff 64bit] [ 0.401173] pci 0000:00:14.0: [8086:34ed] type 00 class 0x0c0330 [ 0.401205] pci 0000:00:14.0: reg 0x10: [mem 0x4d600000-0x4d60ffff 64bit] [ 0.401306] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.403413] pci 0000:00:14.2: [8086:34ef] type 00 class 0x050000 [ 0.403449] pci 0000:00:14.2: reg 0x10: [mem 0x6001114000-0x6001115fff 64bit] [ 0.403470] pci 0000:00:14.2: reg 0x18: [mem 0x6001118000-0x6001118fff 64bit] [ 0.405556] pci 0000:00:16.0: [8086:34e0] type 00 class 0x078000 [ 0.405595] pci 0000:00:16.0: reg 0x10: [mem 0x6001117000-0x6001117fff 64bit] [ 0.405709] pci 0000:00:16.0: PME# supported from D3hot [ 0.407881] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400 [ 0.407909] pci 0000:00:17.0: reg 0x10: [mem 0x4d610000-0x4d611fff] [ 0.407921] pci 0000:00:17.0: reg 0x14: [mem 0x4d614000-0x4d6140ff] [ 0.407932] pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087] [ 0.407943] pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b] [ 0.407954] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f] [ 0.407965] pci 0000:00:17.0: reg 0x24: [mem 0x4d613000-0x4d6137ff] [ 0.408030] pci 0000:00:17.0: PME# supported from D3hot [ 0.410153] pci 0000:00:1d.0: [8086:34b0] type 01 class 0x060400 [ 0.410296] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.410328] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity [ 0.412437] pci 0000:00:1d.1: [8086:34b1] type 01 class 0x060400 [ 0.412577] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold [ 0.412608] pci 0000:00:1d.1: PTM enabled (root), 4ns granularity [ 0.414778] pci 0000:00:1f.0: [8086:3482] type 00 class 0x060100 [ 0.416969] pci 0000:00:1f.3: [8086:34c8] type 00 class 0x040380 [ 0.417056] pci 0000:00:1f.3: reg 0x10: [mem 0x6001110000-0x6001113fff 64bit] [ 0.417138] pci 0000:00:1f.3: reg 0x20: [mem 0x6001000000-0x60010fffff 64bit] [ 0.417307] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.419464] pci 0000:00:1f.4: [8086:34a3] type 00 class 0x0c0500 [ 0.419507] pci 0000:00:1f.4: reg 0x10: [mem 0x6001116000-0x60011160ff 64bit] [ 0.419554] pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f] [ 0.421652] pci 0000:00:1f.5: [8086:34a4] type 00 class 0x0c8000 [ 0.421678] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.423826] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.423862] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.423891] pci 0000:01:00.0: reg 0x18: [mem 0x4d504000-0x4d504fff 64bit] [ 0.423909] pci 0000:01:00.0: reg 0x20: [mem 0x4d500000-0x4d503fff 64bit] [ 0.424061] pci 0000:01:00.0: supports D1 D2 [ 0.424063] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.424256] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 0.424260] pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff] [ 0.424264] pci 0000:00:1d.0: bridge window [mem 0x4d500000-0x4d5fffff] [ 0.424399] pci 0000:02:00.0: [10ec:c821] type 00 class 0x028000 [ 0.424503] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.424592] pci 0000:02:00.0: reg 0x18: [mem 0x4d400000-0x4d40ffff 64bit] [ 0.424990] pci 0000:02:00.0: supports D1 D2 [ 0.424991] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425318] pci 0000:00:1d.1: PCI bridge to [bus 02] [ 0.425322] pci 0000:00:1d.1: bridge window [io 0x3000-0x3fff] [ 0.425325] pci 0000:00:1d.1: bridge window [mem 0x4d400000-0x4d4fffff] [ 0.430438] ACPI: EC: interrupt unblocked [ 0.430439] ACPI: EC: event unblocked [ 0.430461] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.430462] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.430569] iommu: Default domain type: Translated [ 0.430569] SCSI subsystem initialized [ 0.430569] libata version 3.00 loaded. [ 0.430569] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.430569] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.430569] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.430569] vgaarb: loaded [ 0.430569] ACPI: bus type USB registered [ 0.430569] usbcore: registered new interface driver usbfs [ 0.430569] usbcore: registered new interface driver hub [ 0.430569] usbcore: registered new device driver usb [ 0.430569] pps_core: LinuxPPS API ver. 1 registered [ 0.430569] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.430569] PTP clock support registered [ 0.430569] EDAC MC: Ver: 3.0.0 [ 0.430569] Registered efivars operations [ 0.430569] PCI: Using ACPI for IRQ routing [ 0.454743] PCI: pci_cache_line_size set to 64 bytes [ 0.454798] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window [ 0.454846] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.454848] e820: reserve RAM buffer [mem 0x273e4000-0x27ffffff] [ 0.454849] e820: reserve RAM buffer [mem 0x29f24000-0x2bffffff] [ 0.454850] e820: reserve RAM buffer [mem 0x29f7b000-0x2bffffff] [ 0.454851] e820: reserve RAM buffer [mem 0x38a2f000-0x3bffffff] [ 0.454852] e820: reserve RAM buffer [mem 0x2b2c00000-0x2b3ffffff] [ 0.454958] NetLabel: Initializing [ 0.454959] NetLabel: domain hash size = 128 [ 0.454959] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.454975] NetLabel: unlabeled traffic allowed by default [ 0.459223] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.459228] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 0.459228] clocksource: Switched to clocksource tsc-early [ 0.471935] *** VALIDATE bpf *** [ 0.471999] VFS: Disk quotas dquot_6.6.0 [ 0.472016] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.472042] *** VALIDATE ramfs *** [ 0.472046] *** VALIDATE hugetlbfs *** [ 0.472134] AppArmor: AppArmor Filesystem Enabled [ 0.472169] pnp: PnP ACPI init [ 0.472583] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.472585] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.472587] system 00:00: [io 0xfd60-0xfd63] has been reserved [ 0.472592] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.472794] system 00:01: [io 0x1854-0x1857] has been reserved [ 0.472798] system 00:01: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.472856] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.472918] pnp 00:03: Plug and Play ACPI device, IDs SYN3286 PNP0f13 (active) [ 0.474110] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.474112] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.474114] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.474116] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.474118] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.474119] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.474121] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.474125] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.475781] system 00:05: [io 0x1800-0x18fe] could not be reserved [ 0.475783] system 00:05: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.475785] system 00:05: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.475786] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.475788] system 00:05: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.475789] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.475791] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.475795] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.476287] system 00:06: [io 0x2000-0x20fe] has been reserved [ 0.476291] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.476630] system 00:07: [mem 0xfd6e0000-0xfd6effff] has been reserved [ 0.476632] system 00:07: [mem 0xfd6d0000-0xfd6dffff] has been reserved [ 0.476633] system 00:07: [mem 0xfd6a0000-0xfd6affff] has been reserved [ 0.476635] system 00:07: [mem 0xfd690000-0xfd69ffff] has been reserved [ 0.476638] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.476951] system 00:08: [mem 0xfe038000-0xfe038fff] has been reserved [ 0.476954] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.477564] pnp: PnP ACPI: found 9 devices [ 0.479026] thermal_sys: Registered thermal governor 'fair_share' [ 0.479027] thermal_sys: Registered thermal governor 'bang_bang' [ 0.479028] thermal_sys: Registered thermal governor 'step_wise' [ 0.479029] thermal_sys: Registered thermal governor 'user_space' [ 0.479029] thermal_sys: Registered thermal governor 'power_allocator' [ 0.483546] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.483589] pci 0000:00:1f.5: BAR 0: no space for [mem size 0x00001000] [ 0.483592] pci 0000:00:1f.5: BAR 0: trying firmware assignment [mem 0xfe010000-0xfe010fff] [ 0.483594] pci 0000:00:1f.5: BAR 0: [mem 0xfe010000-0xfe010fff] conflicts with Reserved [mem 0xfc800000-0xfe7fffff] [ 0.483595] pci 0000:00:1f.5: BAR 0: failed to assign [mem size 0x00001000] [ 0.483599] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 0.483603] pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff] [ 0.483609] pci 0000:00:1d.0: bridge window [mem 0x4d500000-0x4d5fffff] [ 0.483618] pci 0000:00:1d.1: PCI bridge to [bus 02] [ 0.483621] pci 0000:00:1d.1: bridge window [io 0x3000-0x3fff] [ 0.483626] pci 0000:00:1d.1: bridge window [mem 0x4d400000-0x4d4fffff] [ 0.483636] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.483638] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.483639] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.483641] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.483642] pci_bus 0000:00: resource 7 [mem 0x4d400000-0xbfffffff window] [ 0.483643] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.483645] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.483646] pci_bus 0000:01: resource 1 [mem 0x4d500000-0x4d5fffff] [ 0.483647] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.483649] pci_bus 0000:02: resource 1 [mem 0x4d400000-0x4d4fffff] [ 0.484006] NET: Registered protocol family 2 [ 0.484254] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.484321] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.484538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.484664] TCP: Hash tables configured (established 65536 bind 65536) [ 0.484712] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.484740] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.484796] NET: Registered protocol family 1 [ 0.484802] NET: Registered protocol family 44 [ 0.484817] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.486924] PCI: CLS 64 bytes, default 64 [ 0.486976] Trying to unpack rootfs image as initramfs... [ 0.742913] Freeing initrd memory: 84824K [ 0.762307] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.762309] software IO TLB: mapped [mem 0x34057000-0x38057000] (64MB) [ 0.762511] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1128af0325d, max_idle_ns: 440795261011 ns [ 0.762527] clocksource: Switched to clocksource tsc [ 0.762558] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.762624] check: Scanning for low memory corruption every 60 seconds [ 0.763119] Initialise system trusted keyrings [ 0.763131] Key type blacklist registered [ 0.763178] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.764630] zbud: loaded [ 0.765011] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.765198] fuse: init (API version 7.31) [ 0.765213] *** VALIDATE fuse *** [ 0.765215] *** VALIDATE fuse *** [ 0.765316] Platform Keyring initialized [ 0.771318] Key type asymmetric registered [ 0.771320] Asymmetric key parser 'x509' registered [ 0.771331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.771366] io scheduler mq-deadline registered [ 0.771944] pcieport 0000:00:1d.0: AER: enabled with IRQ 122 [ 0.771999] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 0.772433] pcieport 0000:00:1d.1: AER: enabled with IRQ 123 [ 0.772485] pcieport 0000:00:1d.1: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 0.772586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.772652] efifb: probing for efifb [ 0.772679] efifb: showing boot graphics [ 0.773212] efifb: framebuffer at 0x4000000000, using 4128k, total 4128k [ 0.773213] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.773214] efifb: scrolling: redraw [ 0.773215] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.773325] Console: switching to colour frame buffer device 170x48 [ 0.776255] fb0: EFI VGA frame buffer device [ 0.776264] intel_idle: does not run on family 6 model 126 [ 0.776492] ACPI: AC Adapter [ACAD] (off-line) [ 0.776581] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C0D:00/input/input0 [ 0.776599] ACPI: Lid Switch [LID0] [ 0.776655] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.776690] ACPI: Power Button [PWRB] [ 0.776724] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.776747] ACPI: Power Button [PWRF] [ 0.777635] Monitor-Mwait will be used to enter C-1 state [ 0.777646] Monitor-Mwait will be used to enter C-2 state [ 0.777653] Monitor-Mwait will be used to enter C-3 state [ 0.779966] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.779968] ACPI: Thermal Zone [TZ00] (28 C) [ 0.780074] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.780074] ACPI: Thermal Zone [TZ02] (10 C) [ 0.780298] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.781509] battery: ACPI: Battery Slot [BAT1] (battery present) [ 0.782163] Linux agpgart interface v0.103 [ 0.792969] loop: module loaded [ 0.793216] libphy: Fixed MDIO Bus: probed [ 0.793217] tun: Universal TUN/TAP device driver, 1.6 [ 0.793246] PPP generic driver version 2.4.2 [ 0.793359] VFIO - User Level meta-driver version: 0.3 [ 0.793504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.793507] ehci-pci: EHCI PCI platform driver [ 0.793518] ehci-platform: EHCI generic platform driver [ 0.793534] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.793535] ohci-pci: OHCI PCI platform driver [ 0.793544] ohci-platform: OHCI generic platform driver [ 0.793552] uhci_hcd: USB Universal Host Controller Interface driver [ 0.793879] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.793890] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.794999] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810 [ 0.795006] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.795247] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.795248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.795250] usb usb1: Product: xHCI Host Controller [ 0.795251] usb usb1: Manufacturer: Linux 5.4.0-70-generic xhci-hcd [ 0.795252] usb usb1: SerialNumber: ... [ 0.795399] hub 1-0:1.0: USB hub found [ 0.795419] hub 1-0:1.0: 12 ports detected [ 0.797244] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.797248] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.797251] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.797292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.797293] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.797294] usb usb2: Product: xHCI Host Controller [ 0.797295] usb usb2: Manufacturer: Linux 5.4.0-70-generic xhci-hcd [ 0.797296] usb usb2: SerialNumber: ... [ 0.797434] hub 2-0:1.0: USB hub found [ 0.797448] hub 2-0:1.0: 6 ports detected [ 0.797959] usb: port power management may be unreliable [ 0.798337] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.810862] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.810867] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.811189] mousedev: PS/2 mouse device common for all mice [ 0.811678] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.812320] rtc_cmos rtc_cmos: registered as rtc0 [ 0.812335] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.812343] i2c /dev entries driver [ 0.812398] device-mapper: uevent: version 1.0.3 [ 0.812472] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 0.812493] platform eisa.0: Probing EISA bus 0 [ 0.812495] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.812497] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.812498] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.812499] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.812500] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.812502] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.812503] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.812504] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.812505] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.812506] platform eisa.0: EISA: Detected 0 cards [ 0.812510] intel_pstate: Intel P-state driver initializing [ 0.812840] intel_pstate: HWP enabled [ 0.812862] ledtrig-cpu: registered to indicate activity on CPUs [ 0.812864] EFI Variables Facility v0.08 2004-May-17 [ 0.823214] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.861735] intel_pmc_core INT33A1:00: initialized [ 0.861801] drop_monitor: Initializing network drop monitor service [ 0.861912] NET: Registered protocol family 10 [ 0.865132] Segment Routing with IPv6 [ 0.865149] NET: Registered protocol family 17 [ 0.865169] Key type dns_resolver registered [ 0.865358] RAS: Correctable Errors collector initialized. [ 0.865384] microcode: sig=0x706e5, pf=0x80, revision=0xa0 [ 0.865412] microcode: Microcode Update Driver: v2.2. [ 0.865414] IPI shorthand broadcast: enabled [ 0.865419] sched_clock: Marking stable (864470529, 938905)->(871850023, -6440589) [ 0.865462] registered taskstats version 1 [ 0.865470] Loading compiled-in X.509 certificates [ 0.865981] Loaded X.509 cert 'Build time autogenerated kernel key: 02ba5cdf8e471e5f2698738be0ff1ad7fe71e77d' [ 0.866439] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.866888] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.866908] zswap: loaded using pool lzo/zbud [ 0.866970] Key type ._fscrypt registered [ 0.866971] Key type .fscrypt registered [ 0.869948] Key type big_key registered [ 0.869952] Key type trusted registered [ 0.871368] Key type encrypted registered [ 0.871370] AppArmor: AppArmor sha1 policy hashing enabled [ 0.873301] integrity: Loading X.509 certificate: UEFI:db [ 0.873346] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.873347] integrity: Loading X.509 certificate: UEFI:db [ 0.873363] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.873364] integrity: Loading X.509 certificate: UEFI:db [ 0.873376] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7' [ 0.873991] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.874025] integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469' [ 0.874026] integrity: Loading X.509 certificate: UEFI:MokListRT [ 0.874231] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.876027] ima: Allocated hash algorithm: sha1 [ 0.893671] ima: No architecture policies found [ 0.893690] evm: Initialising EVM extended attributes: [ 0.893690] evm: security.selinux [ 0.893691] evm: security.SMACK64 [ 0.893691] evm: security.SMACK64EXEC [ 0.893691] evm: security.SMACK64TRANSMUTE [ 0.893692] evm: security.SMACK64MMAP [ 0.893692] evm: security.apparmor [ 0.893692] evm: security.ima [ 0.893693] evm: security.capability [ 0.893693] evm: HMAC attrs: 0x1 [ 0.894627] PM: Magic number: 1:575:735 [ 0.894639] hwmon hwmon2: hash matches [ 0.894834] rtc_cmos rtc_cmos: setting system clock to 2021-04-07T13:44:09 UTC (1617803049) [ 0.898102] Freeing unused decrypted memory: 2040K [ 0.898370] Freeing unused kernel image memory: 2732K [ 0.922442] Write protecting the kernel read-only data: 22528k [ 0.922873] Freeing unused kernel image memory: 2008K [ 0.923063] Freeing unused kernel image memory: 1136K [ 0.928087] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.928089] Run /init as init process [ 0.981018] hidraw: raw HID events driver (C) Jiri Kosina [ 0.984089] acpi PNP0C14:02: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:01) [ 0.984299] acpi PNP0C14:03: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:01) [ 0.984329] wmi_bus wmi_bus-PNP0C14:03: WQBJ data block query control method not found [ 0.989351] ahci 0000:00:17.0: version 3.0 [ 0.989645] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl RAID mode [ 0.989647] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds [ 0.990004] scsi host0: ahci [ 0.990565] scsi host1: ahci [ 0.990612] ata1: SATA max UDMA/133 abar m2048@0x4d613000 port 0x4d613100 irq 125 [ 0.990614] ata2: SATA max UDMA/133 abar m2048@0x4d613000 port 0x4d613180 irq 125 [ 1.015124] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.015193] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.017091] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.017100] r8169 0000:01:00.0: enabling device (0000 -> 0003) [ 1.018604] cryptd: max_cpu_qlen set to 1000 [ 1.023705] AVX2 version of gcm_enc/dec engaged. [ 1.023706] AES CTR mode by8 optimization enabled [ 1.030256] libphy: r8169: probed [ 1.030416] r8169 0000:01:00.0 eth0: RTL8168h/8111h, XX:XX:XX:XX:XX:XX, XID 541, IRQ 126 [ 1.030417] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.030985] r8169 0000:01:00.0 eno1: renamed from eth0 [ 1.076574] checking generic (4000000000 408000) vs hw (4000000000 10000000) [ 1.076575] fb0: switching to inteldrmfb from EFI VGA [ 1.076651] Console: switching to colour dummy device 80x25 [ 1.076673] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.077696] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.077697] [drm] Driver supports precise vblank timestamp query. [ 1.078412] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.078767] [drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7) [ 1.107871] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 1.110499] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.110861] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 1.111697] fbcon: i915drmfb (fb0) is primary device [ 1.122367] Console: switching to colour frame buffer device 170x48 [ 1.130330] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.141216] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 1.295637] usb 1-1: New USB device found, idVendor=2001, idProduct=3c19, bcdDevice= 1.01 [ 1.295638] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.295639] usb 1-1: Product: 11n Adapter [ 1.295640] usb 1-1: Manufacturer: Ralink [ 1.295640] usb 1-1: SerialNumber: ... [ 1.305951] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.305972] ata2: SATA link down (SStatus 4 SControl 300) [ 1.306603] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 1.307012] ata1.00: ATA-10: TOSHIBA MQ04ABF100, JU007C, max UDMA/100 [ 1.307013] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.308080] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 1.308482] ata1.00: configured for UDMA/100 [ 1.308657] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ04ABF1 7C PQ: 0 ANSI: 5 [ 1.308786] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.308897] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.308899] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.308913] sd 0:0:0:0: [sda] Write Protect is off [ 1.308914] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.308934] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.374456] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 1.375252] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.430409] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 1.759986] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826] [ 1.789668] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..] [ 1.789672] psmouse serio1: synaptics: Your touchpad (PNP: SYN3286 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 1.813355] usb 1-3: New USB device found, idVendor=043e, idProduct=70d5, bcdDevice=11.00 [ 1.813356] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.813357] usb 1-3: Product: USB Drive [ 1.813358] usb 1-3: Manufacturer: LG Electronics [ 1.813358] usb 1-3: SerialNumber: ... [ 1.816000] usb-storage 1-3:1.0: USB Mass Storage device detected [ 1.816096] scsi host2: usb-storage 1-3:1.0 [ 1.816139] usbcore: registered new interface driver usb-storage [ 1.816985] usbcore: registered new interface driver uas [ 1.846791] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.16, id: 0x1e2b1, caps: 0xf00323/0x840300/0x2e800/0x400000, board id: 3320, fw id: 2659795 [ 1.884741] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.942484] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 2.110324] usb 1-5: New USB device found, idVendor=04ca, idProduct=707d, bcdDevice= 0.05 [ 2.110325] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.110327] usb 1-5: Product: HP Webcam [ 2.110327] usb 1-5: Manufacturer: DHKQBA1BIDZ9RP [ 2.110328] usb 1-5: SerialNumber: ... [ 2.238407] usb 1-10: new full-speed USB device number 5 using xhci_hcd [ 2.394992] usb 1-10: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10 [ 2.394994] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.394996] usb 1-10: Product: Bluetooth Radio [ 2.394997] usb 1-10: Manufacturer: Realtek [ 2.394997] usb 1-10: SerialNumber: ... [ 2.438239] raid6: avx512x4 gen() 46696 MB/s [ 2.486238] raid6: avx512x4 xor() 27001 MB/s [ 2.534239] raid6: avx512x2 gen() 41760 MB/s [ 2.582238] raid6: avx512x2 xor() 24228 MB/s [ 2.630240] raid6: avx512x1 gen() 34787 MB/s [ 2.678240] raid6: avx512x1 xor() 20345 MB/s [ 2.726239] raid6: avx2x4 gen() 34742 MB/s [ 2.774239] raid6: avx2x4 xor() 20953 MB/s [ 2.822238] raid6: avx2x2 gen() 35234 MB/s [ 2.870239] raid6: avx2x2 xor() 23166 MB/s [ 2.918241] raid6: avx2x1 gen() 27680 MB/s [ 2.966239] raid6: avx2x1 xor() 16438 MB/s [ 3.014241] raid6: sse2x4 gen() 11647 MB/s [ 3.062241] raid6: sse2x4 xor() 7053 MB/s [ 3.110243] raid6: sse2x2 gen() 11057 MB/s [ 3.158242] raid6: sse2x2 xor() 6870 MB/s [ 3.206244] raid6: sse2x1 gen() 10659 MB/s [ 3.254242] raid6: sse2x1 xor() 5543 MB/s [ 3.254243] raid6: using algorithm avx512x4 gen() 46696 MB/s [ 3.254243] raid6: .... xor() 27001 MB/s, rmw enabled [ 3.254244] raid6: using avx512x2 recovery algorithm [ 3.256250] xor: automatically using best checksumming function avx [ 3.268584] Btrfs loaded, crc32c=crc32c-intel [ 3.466860] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.420960] scsi 2:0:0:0: Direct-Access LGE USB Drive 1100 PQ: 0 ANSI: 0 CCS [ 4.421140] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 4.421491] sd 2:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.87 GiB) [ 4.421977] sd 2:0:0:0: [sdb] Write Protect is off [ 4.421991] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 4.422488] sd 2:0:0:0: [sdb] No Caching mode page found [ 4.422490] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 4.445137] sdb: sdb1 [ 4.446741] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 5.835996] systemd[1]: Inserted module 'autofs4' [ 6.148948] systemd[1]: systemd 245.4-4ubuntu3.6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 6.166557] systemd[1]: Detected architecture x86-64. [ 6.193009] systemd[1]: Set hostname to ... [ 8.556749] systemd[1]: Created slice system-modprobe.slice. [ 8.556936] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 8.557078] systemd[1]: Created slice User and Session Slice. [ 8.557108] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.557260] systemd[1]: Set up automount ... [ 8.557283] systemd[1]: Reached target User and Group Name Lookups. [ 8.557291] systemd[1]: Reached target Remote File Systems. [ 8.557296] systemd[1]: Reached target Slices. [ 8.557338] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 8.557390] systemd[1]: Listening on LVM2 poll daemon socket. [ 8.557429] systemd[1]: Listening on Syslog Socket. [ 8.570575] systemd[1]: Listening on Process Core Dump Socket. [ 8.570617] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.570641] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.570723] systemd[1]: Listening on Journal Audit Socket. [ 8.570763] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.570808] systemd[1]: Listening on Journal Socket. [ 8.570850] systemd[1]: Listening on udev Control Socket. [ 8.570883] systemd[1]: Listening on udev Kernel Socket. [ 8.571458] systemd[1]: Mounting Huge Pages File System... [ 8.572029] systemd[1]: Mounting POSIX Message Queue File System... [ 8.572806] systemd[1]: Mounting Kernel Debug File System... [ 8.573551] systemd[1]: Mounting Kernel Trace File System... [ 8.574627] systemd[1]: Starting Journal Service... [ 8.575360] systemd[1]: Starting Availability of block devices... [ 8.576385] systemd[1]: Starting Set the console keyboard layout... [ 8.577256] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.578145] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 8.578178] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.615135] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.615169] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.653596] systemd[1]: Starting Load Kernel Modules... [ 8.654105] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.654653] systemd[1]: Starting udev Coldplug all Devices... [ 8.655261] systemd[1]: Starting Uncomplicated firewall... [ 8.656428] systemd[1]: Mounted Huge Pages File System. [ 8.656515] systemd[1]: Mounted POSIX Message Queue File System. [ 8.656581] systemd[1]: Mounted Kernel Debug File System. [ 8.656638] systemd[1]: Mounted Kernel Trace File System. [ 8.656944] systemd[1]: Finished Availability of block devices. [ 8.728565] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.740410] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 8.741251] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.741902] systemd[1]: Activating swap /swapfile... [ 8.784910] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.784947] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.785486] systemd[1]: Starting Load/Save Random Seed... [ 8.786000] systemd[1]: Starting Create System Users... [ 8.829584] systemd[1]: Finished Uncomplicated firewall. [ 8.900303] systemd[1]: Started Journal Service. [ 8.923029] systemd-journald[328]: Received client request to flush runtime journal. [ 9.138281] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 9.643804] lp: driver loaded but no devices found [ 9.684854] ppdev: user-space parallel port driver [ 11.702819] input: HP Wireless hotkeys as /devices/virtual/input/input7 [ 11.708603] intel_rapl_common: Found RAPL domain package [ 11.708650] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI [ 12.223534] Bluetooth: Core ver 2.22 [ 12.223551] NET: Registered protocol family 31 [ 12.223552] Bluetooth: HCI device and connection manager initialized [ 12.223555] Bluetooth: HCI socket layer initialized [ 12.223557] Bluetooth: L2CAP socket layer initialized [ 12.223559] Bluetooth: SCO socket layer initialized [ 12.438751] intel_rapl_common: Found RAPL domain package [ 12.438752] intel_rapl_common: Found RAPL domain core [ 12.438753] intel_rapl_common: Found RAPL domain uncore [ 12.590918] usbcore: registered new interface driver btusb [ 12.594262] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 [ 12.595476] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 12.595478] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin [ 12.653132] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 12.740829] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 12.740831] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 12.740831] RAPL PMU: hw unit of domain package 2^-14 Joules [ 12.740832] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 12.787265] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 12.910088] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin [ 13.030219] Bluetooth: hci0: RTL: cfg_sz 10, total sz 31990 [ 13.324712] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 13.486463] Bluetooth: hci0: RTL: fw version 0x829a7644 [ 13.663194] mc: Linux media interface: v0.10 [ 13.673156] videodev: Linux video capture interface: v2.00 [ 13.698289] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 13.698411] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 13.698562] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 14.454321] uvcvideo: Found UVC 1.00 device HP Webcam (04ca:707d) [ 14.462271] input: HP Webcam: HP Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input9 [ 14.462314] usbcore: registered new interface driver uvcvideo [ 14.462320] USB Video Class driver (1.1.1) [ 14.534071] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 14.534073] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.534073] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 14.534074] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 14.534075] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 14.534075] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 14.534076] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 14.536411] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 14.536655] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 14.806741] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 14.806771] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 14.806797] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 14.806824] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 14.806850] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 14.806876] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 14.806899] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 14.806922] input: HDA Intel PCH HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 14.806944] input: HDA Intel PCH HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 15.226562] usb 1-1: reset high-speed USB device number 2 using xhci_hcd [ 15.386296] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected [ 15.396394] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 15.396513] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 15.397976] usbcore: registered new interface driver rt2800usb [ 15.461078] rt2800usb 1-1:1.0 wlx9cd643004138: renamed from wlan0 [ 25.471843] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.471844] Bluetooth: BNEP filters: protocol multicast [ 25.471847] Bluetooth: BNEP socket layer initialized [ 25.516514] NET: Registered protocol family 38 [ 28.084348] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 28.195512] r8169 0000:01:00.0 eno1: Link is Down [ 28.200516] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 28.261941] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 30.276025] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 30.284509] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 30.297929] wlx9cd643004138: authenticated [ 30.298266] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 30.308448] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 30.311400] wlx9cd643004138: associated [ 31.375063] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 38.509011] Bluetooth: RFCOMM TTY layer initialized [ 38.509017] Bluetooth: RFCOMM socket layer initialized [ 38.509024] Bluetooth: RFCOMM ver 1.11 [ 60.565487] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 84.099244] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 84.099248] Bluetooth: HIDP socket layer initialized [ 84.113633] hid-generic 0005:413C:3019.0001: unknown main item tag 0x0 [ 84.113800] input: Dell WM713 Wireless Touch Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/bluetooth/hci0/hci0:1/0005:413C:3019.0001/input/input19 [ 84.114876] input: Dell WM713 Wireless Touch Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/bluetooth/hci0/hci0:1/0005:413C:3019.0001/input/input20 [ 84.115018] input: Dell WM713 Wireless Touch Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/bluetooth/hci0/hci0:1/0005:413C:3019.0001/input/input21 [ 84.115096] hid-generic 0005:413C:3019.0001: input,hidraw0: BLUETOOTH HID v2.00 Keyboard [Dell WM713 Wireless Touch Mouse] on XX:XX:XX:XX:XX:XX [ 954.439485] EXT4-fs (sda2): bad geometry: block count 244164608 exceeds size of device (4096 blocks) [ 4553.075032] EXT4-fs (sda2): bad geometry: block count 244164608 exceeds size of device (4096 blocks) [ 5174.579522] usb 1-3: USB disconnect, device number 3 [ 5188.658553] usb 1-3: new high-speed USB device number 6 using xhci_hcd [ 5188.822309] usb 1-3: New USB device found, idVendor=0000, idProduct=7777, bcdDevice= 1.00 [ 5188.822311] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5188.822313] usb 1-3: Product: Mass Storage [ 5188.822314] usb 1-3: Manufacturer: Generic [ 5188.822316] usb 1-3: SerialNumber: ... [ 5188.823518] usb-storage 1-3:1.0: USB Mass Storage device detected [ 5188.824709] scsi host2: usb-storage 1-3:1.0 [ 5189.844120] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 4 [ 5189.845790] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 5189.847058] sd 2:0:0:0: [sdb] 131072000 512-byte logical blocks: (67.1 GB/62.5 GiB) [ 5189.848945] sd 2:0:0:0: [sdb] Write Protect is off [ 5189.848946] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 5189.851162] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5189.870514] sdb: sdb1 sdb2 [ 5189.872726] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 5228.521931] sdb: [ 5228.897848] sdb: sdb1 [ 6074.867312] usb 1-1: USB disconnect, device number 2 [ 6074.867666] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -19 [ 6074.867816] xhci_hcd 0000:00:14.0: WARN Cannot submit Set TR Deq Ptr [ 6074.867818] xhci_hcd 0000:00:14.0: A Set TR Deq Ptr command is pending. [ 6074.907679] wlx9cd643004138: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6078.539802] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 6078.705934] usb 1-1: New USB device found, idVendor=2001, idProduct=3c19, bcdDevice= 1.01 [ 6078.705937] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6078.705939] usb 1-1: Product: 11n Adapter [ 6078.705941] usb 1-1: Manufacturer: Ralink [ 6078.705942] usb 1-1: SerialNumber: ... [ 6078.835998] usb 1-1: reset high-speed USB device number 7 using xhci_hcd [ 6079.002982] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected [ 6079.013194] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 5370 detected [ 6079.013308] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 6079.027381] rt2800usb 1-1:1.0 wlx9cd643004138: renamed from wlan0 [ 6079.275211] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 6079.275262] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 6080.633812] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 6080.642383] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6080.648075] wlx9cd643004138: authenticated [ 6080.651678] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6080.662157] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 6080.664998] wlx9cd643004138: associated [ 6080.672119] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 6355.935673] wlx9cd643004138: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6358.043817] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 6358.051102] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6358.057720] wlx9cd643004138: authenticated [ 6358.061311] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6358.068342] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 6358.071265] wlx9cd643004138: associated [ 6358.081431] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 6361.660696] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.660752] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.660836] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.660919] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.660994] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.661074] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.661154] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.661234] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.661362] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.661418] ieee80211 phy1: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6361.661582] usb 1-1: USB disconnect, device number 7 [ 6361.662081] xhci_hcd 0000:00:14.0: WARN Cannot submit Set TR Deq Ptr [ 6361.662083] xhci_hcd 0000:00:14.0: A Set TR Deq Ptr command is pending. [ 6362.261375] ieee80211 phy1: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 6362.301424] wlx9cd643004138: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6373.545346] usb 1-1: new high-speed USB device number 8 using xhci_hcd [ 6373.710048] usb 1-1: New USB device found, idVendor=2001, idProduct=3c19, bcdDevice= 1.01 [ 6373.710051] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6373.710053] usb 1-1: Product: 11n Adapter [ 6373.710054] usb 1-1: Manufacturer: Ralink [ 6373.710056] usb 1-1: SerialNumber: ... [ 6373.841866] usb 1-1: reset high-speed USB device number 8 using xhci_hcd [ 6374.000199] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected [ 6374.010167] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5370 detected [ 6374.010280] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [ 6374.019841] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 6374.055993] rt2800usb 1-1:1.0 wlx9cd643004138: renamed from wlan0 [ 6374.090274] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 6374.090301] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 6375.441197] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 6375.450480] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6375.553301] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 6375.559521] wlx9cd643004138: authenticated [ 6375.561233] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6375.569051] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 6375.572209] wlx9cd643004138: associated [ 6375.578804] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 6379.821210] wlx9cd643004138: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6381.526591] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 6381.565820] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6381.570182] wlx9cd643004138: authenticated [ 6381.577255] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6381.583865] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 6381.586672] wlx9cd643004138: associated [ 6381.592830] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 6612.772106] usb 1-1: USB disconnect, device number 8 [ 6612.772606] xhci_hcd 0000:00:14.0: WARN Cannot submit Set TR Deq Ptr [ 6612.772608] xhci_hcd 0000:00:14.0: A Set TR Deq Ptr command is pending. [ 6612.855960] wlx9cd643004138: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6630.035830] usb 1-1: new high-speed USB device number 9 using xhci_hcd [ 6630.201670] usb 1-1: New USB device found, idVendor=2001, idProduct=3c19, bcdDevice= 1.01 [ 6630.201673] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6630.201675] usb 1-1: Product: 11n Adapter [ 6630.201677] usb 1-1: Manufacturer: Ralink [ 6630.201678] usb 1-1: SerialNumber: ... [ 6630.332131] usb 1-1: reset high-speed USB device number 9 using xhci_hcd [ 6630.490833] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected [ 6630.500736] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 5370 detected [ 6630.500852] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht' [ 6630.569549] rt2800usb 1-1:1.0 wlx9cd643004138: renamed from wlan0 [ 6630.602366] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 6630.602396] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 6631.984109] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 6631.992567] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6631.997980] wlx9cd643004138: authenticated [ 6631.999769] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6632.007970] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 6632.010857] wlx9cd643004138: associated [ 6632.021857] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 6706.743800] wlx9cd643004138: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6710.918904] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 6710.927829] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6710.936665] wlx9cd643004138: authenticated [ 6710.939432] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6710.948054] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 6710.950902] wlx9cd643004138: associated [ 6710.957192] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 6871.604619] rt2800usb_tx_sta_fifo_read_completed: 3 callbacks suppressed [ 6871.604624] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.604696] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.604776] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.604854] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.604935] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.605015] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.605095] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.605175] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.605259] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.605379] ieee80211 phy3: rt2800usb_tx_sta_fifo_read_completed: Warning - TX status read failed -71 [ 6871.605513] usb 1-1: USB disconnect, device number 9 [ 6872.214870] ieee80211 phy3: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush [ 6872.238865] wlx9cd643004138: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6913.130659] usb 1-1: new high-speed USB device number 10 using xhci_hcd [ 6913.296295] usb 1-1: New USB device found, idVendor=2001, idProduct=3c19, bcdDevice= 1.01 [ 6913.296299] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6913.296301] usb 1-1: Product: 11n Adapter [ 6913.296303] usb 1-1: Manufacturer: Ralink [ 6913.296305] usb 1-1: SerialNumber: ... [ 6913.430984] usb 1-1: reset high-speed USB device number 10 using xhci_hcd [ 6913.590235] ieee80211 phy4: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected [ 6913.600332] ieee80211 phy4: rt2x00_set_rf: Info - RF chipset 5370 detected [ 6913.600443] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht' [ 6913.628223] rt2800usb 1-1:1.0 wlx9cd643004138: renamed from wlan0 [ 6913.651628] ieee80211 phy4: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 6913.672841] ieee80211 phy4: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 6915.018238] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 6915.026791] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6915.031353] wlx9cd643004138: authenticated [ 6915.038655] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6915.047987] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 6915.050885] wlx9cd643004138: associated [ 6915.064376] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 7203.130903] usb 1-1: USB disconnect, device number 10 [ 7203.213802] wlx9cd643004138: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 7241.686625] cinnamon-settin[8639]: segfault at c0 ip 00007f1bfd0aa617 sp 00007ffd24a07dc8 error 4 in libnetwork.so[7f1bfd0a0000+31000] [ 7241.686636] Code: 8b 38 e8 7c 86 ff ff 48 8b 3d 15 2b 09 00 be 50 00 00 00 e8 7b ae ff ff 48 89 ef 5d 48 8b 40 30 ff e0 90 f3 0f 1e fa 48 8b 07 <ff> a0 c0 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 [ 7297.053502] usb 1-1: new high-speed USB device number 11 using xhci_hcd [ 7297.218735] usb 1-1: New USB device found, idVendor=2001, idProduct=3c19, bcdDevice= 1.01 [ 7297.218738] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7297.218740] usb 1-1: Product: 11n Adapter [ 7297.218741] usb 1-1: Manufacturer: Ralink [ 7297.218742] usb 1-1: SerialNumber: ... [ 7297.353818] usb 1-1: reset high-speed USB device number 11 using xhci_hcd [ 7297.512419] ieee80211 phy5: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected [ 7297.523043] ieee80211 phy5: rt2x00_set_rf: Info - RF chipset 5370 detected [ 7297.523187] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht' [ 7297.550358] rt2800usb 1-1:1.0 wlx9cd643004138: renamed from wlan0 [ 7297.575540] ieee80211 phy5: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 7297.587528] ieee80211 phy5: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 7298.973803] wlx9cd643004138: authenticate with XX:XX:XX:XX:XX:XX [ 7298.982628] wlx9cd643004138: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 7298.985891] wlx9cd643004138: authenticated [ 7298.989453] wlx9cd643004138: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 7299.000508] wlx9cd643004138: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=1) [ 7299.003518] wlx9cd643004138: associated [ 7299.011194] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd643004138: link becomes ready [ 7491.769013] perf: interrupt took too long (3188 > 3136), lowering kernel.perf_event_max_sample_rate to 62500