[ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07 [ 0.000000] Linux version 4.9.124-nrj-desktop-1rosa-x86_64 (XXX@XXX) (gcc version 5.5.0 20171010 (ROSA) (Linaro GCC 5.5-2017.10) ) #1 SMP PREEMPT Tue Sep 4 09:48:32 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.124-nrj-desktop-1rosa-x86_64 root=UUID=HASH_167-CB63-3950-5EA4-CB6EAC2FEC59 ro splash=silent logo.nologo quiet nomodeset resume=UUID=HASH_2F9-BE2A-5C7F-C116-D94908FCEF8F [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf35efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf35f000-0x00000000bf3affff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf3b0000-0x00000000bf60bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf60cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf60d000-0x00000000bf60dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf60e000-0x00000000bf617fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf618000-0x00000000bf63cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf63d000-0x00000000bf67ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf680000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H67M, BIOS P1.60 07/08/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x33f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask F00000000 write-back [ 0.000000] 2 base 300000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 33F800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcf10-0x000fcf1f] mapped at [ffff8800000fcf10] [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576 [ 0.000000] BRK [0x2901c1000, 0x2901c1fff] PGTABLE [ 0.000000] BRK [0x2901c2000, 0x2901c2fff] PGTABLE [ 0.000000] BRK [0x2901c3000, 0x2901c3fff] PGTABLE [ 0.000000] BRK [0x2901c4000, 0x2901c4fff] PGTABLE [ 0.000000] BRK [0x2901c5000, 0x2901c5fff] PGTABLE [ 0.000000] BRK [0x2901c6000, 0x2901c6fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31a4a000-0x34d1cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000BF3A8068 000054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000BF3AF758 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000BF3A8150 007601 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BF60FF80 000040 [ 0.000000] ACPI: APIC 0x00000000BF3AF850 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000BF3AF8C8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 0x00000000BF3AF9D0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: AAFT 0x00000000BF3AFA10 0000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BF3AFAD0 000038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000033f7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x33f7f2000-0x33f7f5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000033f7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf35efff] [ 0.000000] node 0: [mem 0x00000000bf60c000-0x00000000bf60cfff] [ 0.000000] node 0: [mem 0x00000000bf680000-0x00000000bf7fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000033f7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000033f7fffff] [ 0.000000] On node 0 totalpages: 3140733 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12180 pages used for memmap [ 0.000000] DMA32 zone: 779488 pages, LIFO batch:31 [ 0.000000] Normal zone: 36832 pages used for memmap [ 0.000000] Normal zone: 2357248 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf35f000-0xbf3affff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf3b0000-0xbf60bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf60d000-0xbf60dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf60e000-0xbf617fff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf618000-0xbf63cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf63d000-0xbf67ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff88033f400000 s108888 r8192 d30376 u524288 [ 0.000000] pcpu-alloc: s108888 r8192 d30376 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3091636 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.124-nrj-desktop-1rosa-x86_64 root=UUID=HASH_167-CB63-3950-5EA4-CB6EAC2FEC59 ro splash=silent logo.nologo quiet nomodeset resume=UUID=HASH_2F9-BE2A-5C7F-C116-D94908FCEF8F [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12229344K/12562932K available (8186K kernel code, 1381K rwdata, 3696K rodata, 1468K init, 948K bss, 333588K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.508 MHz processor [ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.01 BogoMIPS (lpj=3292508) [ 0.000032] pid_max: default: 32768 minimum: 301 [ 0.000036] ACPI: Core revision 20160831 [ 0.002730] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.002746] Security Framework initialized [ 0.002747] SELinux: Disabled at boot. [ 0.003320] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.005662] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006706] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.006717] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.006936] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.006936] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.006938] mce: CPU supports 9 MCE banks [ 0.006945] CPU0: Thermal monitoring enabled (TM1) [ 0.006955] process: using mwait in idle threads [ 0.006957] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.006957] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.006959] Spectre V2 : Mitigation: Full generic retpoline [ 0.006960] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.006960] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.006960] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.006961] Speculative Store Bypass: Vulnerable [ 0.007396] Freeing SMP alternatives memory: 32K [ 0.011930] ftrace: allocating 31085 entries in 122 pages [ 0.032937] smpboot: Max logical packages: 1 [ 0.033020] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.033446] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.043452] TSC deadline timer enabled [ 0.043454] smpboot: CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.043457] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.043474] ... version: 3 [ 0.043474] ... bit width: 48 [ 0.043475] ... generic registers: 8 [ 0.043475] ... value mask: 0000ffffffffffff [ 0.043476] ... max period: 00007fffffffffff [ 0.043476] ... fixed-purpose events: 3 [ 0.043477] ... event mask: 00000007000000ff [ 0.060522] x86: Booting SMP configuration: [ 0.060524] .... node #0, CPUs: #1 #2 #3 [ 0.082387] x86: Booted up 1 node, 4 CPUs [ 0.082389] smpboot: Total of 4 processors activated (26340.06 BogoMIPS) [ 0.085008] devtmpfs: initialized [ 0.085053] x86/mm: Memory block size: 128MB [ 0.087186] PM: Registering ACPI NVS region [mem 0xbf35f000-0xbf3affff] (331776 bytes) [ 0.087190] PM: Registering ACPI NVS region [mem 0xbf60e000-0xbf617fff] (40960 bytes) [ 0.087191] PM: Registering ACPI NVS region [mem 0xbf63d000-0xbf67ffff] (274432 bytes) [ 0.087232] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.087238] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.087262] xor: automatically using best checksumming function avx [ 0.087264] pinctrl core: initialized pinctrl subsystem [ 0.087303] RTC time: 0:42:13, date: 11/12/18 [ 0.087367] NET: Registered protocol family 16 [ 0.090687] cpuidle: using governor ladder [ 0.094692] cpuidle: using governor menu [ 0.094758] ACPI: bus type PCI registered [ 0.094759] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.094803] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.094804] PCI: not using MMCONFIG [ 0.094805] PCI: Using configuration type 1 for base access [ 0.094849] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.099819] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.116717] raid6: sse2x1 gen() 8910 MB/s [ 0.133727] raid6: sse2x1 xor() 6912 MB/s [ 0.150740] raid6: sse2x2 gen() 11093 MB/s [ 0.167749] raid6: sse2x2 xor() 8076 MB/s [ 0.184757] raid6: sse2x4 gen() 12933 MB/s [ 0.201768] raid6: sse2x4 xor() 9955 MB/s [ 0.201769] raid6: using algorithm sse2x4 gen() 12933 MB/s [ 0.201770] raid6: .... xor() 9955 MB/s, rmw enabled [ 0.201771] raid6: using ssse3x2 recovery algorithm [ 0.201810] ACPI: Added _OSI(Module Device) [ 0.201810] ACPI: Added _OSI(Processor Device) [ 0.201811] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.201812] ACPI: Added _OSI(Processor Aggregator Device) [ 0.201975] ACPI: Executed 1 blocks of module-level executable AML code [ 0.204390] ACPI: Dynamic OEM Table Load: [ 0.204394] ACPI: SSDT 0xFFFF8803309ECC00 00038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.204519] ACPI: Dynamic OEM Table Load: [ 0.204521] ACPI: SSDT 0xFFFF88033097FB40 000084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.205066] ACPI: Interpreter enabled [ 0.205078] ACPI: (supports S0 S1 S3 S4 S5) [ 0.205079] ACPI: Using IOAPIC for interrupt routing [ 0.205100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.205141] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.205144] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override. [ 0.205396] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.205578] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.209419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.209423] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.209518] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] [ 0.209604] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.209799] PCI host bridge to bus 0000:00 [ 0.209801] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.209802] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.209803] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.209804] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff window] [ 0.209806] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.209807] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.209813] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.209880] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.209906] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.209936] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.210006] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.210034] pci 0000:00:16.0: reg 0x10: [mem 0xfb307000-0xfb30700f 64bit] [ 0.210136] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.210212] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.210236] pci 0000:00:1a.0: reg 0x10: [mem 0xfb306000-0xfb3063ff] [ 0.210353] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.210388] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.210423] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.210447] pci 0000:00:1b.0: reg 0x10: [mem 0xfb300000-0xfb303fff 64bit] [ 0.210552] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.210621] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.210730] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.210770] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.210805] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.210914] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.210954] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.210987] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.211095] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.211135] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.211168] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401 [ 0.211276] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.211315] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.211348] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.211456] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.211496] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.211534] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.211557] pci 0000:00:1d.0: reg 0x10: [mem 0xfb305000-0xfb3053ff] [ 0.211675] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.211711] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.211744] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100 [ 0.211936] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a [ 0.211955] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.211965] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.211976] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.211987] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.211997] pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f] [ 0.212008] pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f] [ 0.212022] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.212023] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.212024] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.212025] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.212111] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.212132] pci 0000:00:1f.3: reg 0x10: [mem 0xfb304000-0xfb3040ff 64bit] [ 0.212162] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.212246] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185 [ 0.212265] pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077] [ 0.212276] pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063] [ 0.212286] pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057] [ 0.212297] pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043] [ 0.212307] pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f] [ 0.212318] pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f] [ 0.212439] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000 [ 0.212448] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.212456] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.212464] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.212469] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.212474] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref] [ 0.212542] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300 [ 0.212551] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff] [ 0.214814] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.214818] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.214821] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.214826] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.214889] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.214977] pci 0000:03:00.0: [1186:4b00] type 00 class 0x020000 [ 0.215015] pci 0000:03:00.0: reg 0x10: [mem 0xfb220000-0xfb223fff 64bit] [ 0.215032] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd0ff] [ 0.215097] pci 0000:03:00.0: reg 0x30: [mem 0xfb200000-0xfb21ffff pref] [ 0.215196] pci 0000:03:00.0: supports D1 D2 [ 0.215197] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215252] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.215263] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.215267] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.215271] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.215349] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.215386] pci 0000:04:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit] [ 0.215552] pci 0000:04:00.0: supports D1 D2 [ 0.215553] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.217826] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.217835] pci 0000:00:1c.2: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.217927] pci 0000:05:00.0: [1b21:1080] type 01 class 0x060401 [ 0.218066] pci 0000:05:00.0: System wakeup disabled by ACPI [ 0.218090] pci 0000:00:1c.3: PCI bridge to [bus 05-06] (subtractive decode) [ 0.218103] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.218104] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.218105] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.218106] pci 0000:00:1c.3: bridge window [mem 0x000c8000-0x000dffff window] (subtractive decode) [ 0.218107] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.218237] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.218263] pci 0000:05:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.218264] pci 0000:05:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.218265] pci 0000:05:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.218266] pci 0000:05:00.0: bridge window [mem 0x000c8000-0x000dffff window] (subtractive decode) [ 0.218267] pci 0000:05:00.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.218353] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 0.218382] pci 0000:07:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 0.218424] pci 0000:07:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref] [ 0.218450] pci 0000:07:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref] [ 0.218586] pci 0000:07:00.0: supports D1 D2 [ 0.218587] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.220835] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 0.220841] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.220854] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.221455] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.221492] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.221528] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.221564] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.221600] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.221636] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.221672] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.221708] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.221754] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.221819] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.221820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.221821] vgaarb: loaded [ 0.221822] vgaarb: bridge control possible 0000:01:00.0 [ 0.221931] SCSI subsystem initialized [ 0.221957] libata version 3.00 loaded. [ 0.221959] ACPI: bus type USB registered [ 0.221971] usbcore: registered new interface driver usbfs [ 0.221977] usbcore: registered new interface driver hub [ 0.221987] usbcore: registered new device driver usb [ 0.222047] PCI: Using ACPI for IRQ routing [ 0.232195] PCI: pci_cache_line_size set to 64 bytes [ 0.232263] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.232264] e820: reserve RAM buffer [mem 0xbf35f000-0xbfffffff] [ 0.232265] e820: reserve RAM buffer [mem 0xbf60d000-0xbfffffff] [ 0.232266] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] [ 0.232267] e820: reserve RAM buffer [mem 0x33f800000-0x33fffffff] [ 0.232332] NetLabel: Initializing [ 0.232333] NetLabel: domain hash size = 128 [ 0.232333] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.232344] NetLabel: unlabeled traffic allowed by default [ 0.232398] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.232403] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.234422] clocksource: Switched to clocksource hpet [ 0.239293] VFS: Disk quotas dquot_6.6.0 [ 0.239307] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.239372] pnp: PnP ACPI init [ 0.239491] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.239492] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.239493] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.239495] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.239496] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.239499] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.239557] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.239559] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.239815] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.239850] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.239852] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.240010] pnp 00:04: [dma 0 disabled] [ 0.240048] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.240175] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.240176] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.240177] system 00:05: [io 0x1180-0x119f] has been reserved [ 0.240178] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.240181] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.240182] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.240184] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.240185] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.240187] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.240228] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.240230] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.240371] pnp: PnP ACPI: found 7 devices [ 0.246300] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.246372] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.246374] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.246376] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.246378] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.246381] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.246396] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.246398] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.246404] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.246414] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.246420] pci 0000:00:1c.2: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.246436] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.246459] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.246474] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 0.246476] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.246485] pci 0000:00:1c.4: bridge window [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.246493] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.246494] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.246495] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.246496] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff window] [ 0.246497] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff window] [ 0.246498] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.246499] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.246500] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.246502] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.246503] pci_bus 0000:03: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.246504] pci_bus 0000:04: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.246505] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.246506] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.246507] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.246508] pci_bus 0000:05: resource 7 [mem 0x000c8000-0x000dffff window] [ 0.246509] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff window] [ 0.246511] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.246512] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.246513] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.246514] pci_bus 0000:06: resource 7 [mem 0x000c8000-0x000dffff window] [ 0.246515] pci_bus 0000:06: resource 8 [mem 0xc0000000-0xffffffff window] [ 0.246516] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff] [ 0.246517] pci_bus 0000:07: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref] [ 0.246567] NET: Registered protocol family 2 [ 0.246706] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.246866] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.246975] TCP: Hash tables configured (established 131072 bind 65536) [ 0.246996] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.247033] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.247087] NET: Registered protocol family 1 [ 0.493525] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.493639] PCI: CLS 64 bytes, default 64 [ 0.493674] Trying to unpack rootfs image as initramfs... [ 0.938725] Freeing initrd memory: 52044K [ 0.938728] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.938731] software IO TLB [mem 0xbb35f000-0xbf35f000] (64MB) mapped at [ffff8800bb35f000-ffff8800bf35efff] [ 0.938814] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 0.938815] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 0.938815] RAPL PMU: hw unit of domain package 2^-16 Joules [ 0.938816] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 0.939559] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.940727] zbud: loaded [ 0.942014] Key type asymmetric registered [ 0.942037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.942064] io scheduler noop registered [ 0.942065] io scheduler deadline registered [ 0.942070] io scheduler cfq registered [ 0.942090] io scheduler bfq registered (default) [ 0.942091] BFQ I/O-scheduler: v8r7 (with cgroups support) [ 0.942788] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 0.942790] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.942791] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 0.942792] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 0.942811] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.942815] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded [ 0.942836] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.942837] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.942841] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded [ 0.942860] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 0.942861] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 0.942865] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded [ 0.942882] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 0.942883] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 0.942887] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded [ 0.942891] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.942894] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.942920] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.942920] vesafb: scrolling: redraw [ 0.942922] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.942930] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90002000000, using 3072k, total 3072k [ 0.975733] Console: switching to colour frame buffer device 128x48 [ 1.008458] fb0: VESA VGA frame buffer device [ 1.008467] intel_idle: MWAIT substates: 0x1120 [ 1.008468] intel_idle: v0.4.1 model 0x2A [ 1.008559] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.008609] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.008612] ACPI: Power Button [PWRB] [ 1.008637] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.008639] ACPI: Power Button [PWRF] [ 1.009027] GHES: HEST is not enabled! [ 1.009082] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.029768] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.030044] Linux agpgart interface v0.103 [ 1.031817] brd: module loaded [ 1.031949] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.034399] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.034422] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.034530] mousedev: PS/2 mouse device common for all mice [ 1.034647] rtc_cmos 00:02: RTC can wake from S4 [ 1.034767] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.034796] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.034826] device-mapper: uevent: version 1.0.3 [ 1.034865] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: XXX@XXX [ 1.034870] intel_pstate: Intel P-state driver initializing [ 1.035080] ledtrig-cpu: registered to indicate activity on CPUs [ 1.035228] Key type dns_resolver registered [ 1.035229] mpls_gso: MPLS GSO support [ 1.035509] microcode: sig=0x206a7, pf=0x2, revision=0x2d [ 1.035607] microcode: Microcode Update Driver: v2.01 <XXX@XXX>, Peter Oruba [ 1.035751] registered taskstats version 1 [ 1.035775] zswap: loaded using pool lzo/zbud [ 1.036356] Btrfs loaded, crc32c=crc32c-generic [ 1.041218] Key type encrypted registered [ 1.041221] ima: No TPM chip found, activating TPM-bypass! [ 1.041224] ima: Allocated hash algorithm: sha1 [ 1.041644] Magic number: 10:612:708 [ 1.041782] rtc_cmos 00:02: setting system clock to 2018-11-12 00:42:14 UTC (1541983334) [ 1.041784] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.041785] EDD information not available. [ 1.041849] PM: Checking hibernation image partition UUID=HASH_2F9-BE2A-5C7F-C116-D94908FCEF8F [ 1.088841] PM: Hibernation image not present or could not be loaded. [ 1.090124] Freeing unused kernel memory: 1468K [ 1.090126] Write protecting the kernel read-only data: 14336k [ 1.090956] Freeing unused kernel memory: 2036K [ 1.092434] Freeing unused kernel memory: 400K [ 1.131336] NET: Registered protocol family 10 [ 1.133075] random: systemd: uninitialized urandom read (16 bytes read) [ 1.133330] random: systemd: uninitialized urandom read (16 bytes read) [ 1.133349] random: systemd: uninitialized urandom read (16 bytes read) [ 1.135701] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.135902] systemd[1]: Detected architecture x86-64. [ 1.135904] systemd[1]: Running in initial RAM disk. [ 1.135914] systemd[1]: No hostname configured. [ 1.135920] systemd[1]: Set hostname to ... [ 1.135944] systemd[1]: Initializing machine ID from random generator. [ 1.178926] systemd[1]: [/run/systemd/generator/dev-disk-by\x2duuid-....device.d/timeout.conf:3] Unknown lvalue 'JobRunningTimeoutSec' in section 'Unit' [ 1.179833] systemd[1]: Listening on Journal Socket. [ 1.179950] systemd[1]: Listening on Journal Audit Socket. [ 1.179972] systemd[1]: Reached target Encrypted Volumes. [ 1.318341] RPC: Registered named UNIX socket transport module. [ 1.318343] RPC: Registered udp transport module. [ 1.318343] RPC: Registered tcp transport module. [ 1.318344] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.434867] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.449474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.449891] ehci-pci: EHCI PCI platform driver [ 1.449990] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.449994] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.450008] ehci-pci 0000:00:1a.0: debug port 2 [ 1.451041] sky2: driver version 1.30 [ 1.451107] sky2 0000:03:00.0: Yukon-2 EC chip revision 2 [ 1.451404] sky2 0000:03:00.0 eth0: addr XX:XX:XX:XX:XX:XX [ 1.453898] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.453912] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb306000 [ 1.453969] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.454293] r8169 0000:07:00.0 eth1: RTL8168e/8111e at 0xffffc900018ed000, XX:XX:XX:XX:XX:XX, XID 0c200000 IRQ 30 [ 1.454294] r8169 0000:07:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.460445] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.460485] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.460486] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.460488] usb usb1: Product: EHCI Host Controller [ 1.460489] usb usb1: Manufacturer: Linux 4.9.124-nrj-desktop-1rosa-x86_64 ehci_hcd [ 1.460490] usb usb1: SerialNumber: ... [ 1.460589] hub 1-0:1.0: USB hub found [ 1.461442] hub 1-0:1.0: 2 ports detected [ 1.461538] ata_piix 0000:00:1f.2: version 2.13 [ 1.461598] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.462328] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.462333] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 1.462888] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490 [ 1.462978] AVX version of gcm_enc/dec engaged. [ 1.462979] AES CTR mode by8 optimization enabled [ 1.463533] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.463534] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.463535] usb usb2: Product: xHCI Host Controller [ 1.463536] usb usb2: Manufacturer: Linux 4.9.124-nrj-desktop-1rosa-x86_64 xhci-hcd [ 1.463537] usb usb2: SerialNumber: ... [ 1.463618] hub 2-0:1.0: USB hub found [ 1.463626] hub 2-0:1.0: 2 ports detected [ 1.463698] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.463700] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 1.463715] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.463730] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.463731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.463732] usb usb3: Product: xHCI Host Controller [ 1.463733] usb usb3: Manufacturer: Linux 4.9.124-nrj-desktop-1rosa-x86_64 xhci-hcd [ 1.463734] usb usb3: SerialNumber: ... [ 1.463810] hub 3-0:1.0: USB hub found [ 1.465858] scsi host0: ata_piix [ 1.465911] hub 3-0:1.0: 2 ports detected [ 1.465942] scsi host1: ata_piix [ 1.465976] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf090 irq 14 [ 1.465980] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf098 irq 15 [ 1.466061] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.466080] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 1.467599] [drm] Initialized [ 1.468700] scsi host2: ata_piix [ 1.468808] scsi host3: ata_piix [ 1.468835] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19 [ 1.468836] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19 [ 1.468963] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.468970] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.468985] ehci-pci 0000:00:1d.0: debug port 2 [ 1.472879] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.472893] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb305000 [ 1.479497] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.479530] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.479532] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.479533] usb usb4: Product: EHCI Host Controller [ 1.479534] usb usb4: Manufacturer: Linux 4.9.124-nrj-desktop-1rosa-x86_64 ehci_hcd [ 1.479535] usb usb4: SerialNumber: ... [ 1.479652] hub 4-0:1.0: USB hub found [ 1.479660] hub 4-0:1.0: 2 ports detected [ 1.484006] wmi: Mapper loaded [ 1.485592] sky2 0000:03:00.0 enp3s0: renamed from eth0 [ 1.491785] r8169 0000:07:00.0 enp7s0: renamed from eth1 [ 1.771466] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.795481] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.890174] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.890178] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.890614] hub 1-1:1.0: USB hub found [ 1.890730] hub 1-1:1.0: 6 ports detected [ 1.913900] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.913904] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.914275] hub 4-1:1.0: USB hub found [ 1.914329] hub 4-1:1.0: 8 ports detected [ 1.963459] tsc: Refined TSC clocksource calibration: 3292.520 MHz [ 1.963466] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns [ 2.163476] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 2.187468] usb 4-1.1: new low-speed USB device number 3 using ehci-pci [ 2.235569] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.235593] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.235775] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.235799] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.241345] ata2.00: ATA-8: WDC WD10EALX-009BA0, 15.01H15, max UDMA/133 [ 2.241348] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.241580] ata2.01: ATA-10: WDC WD10EZEX-75WN4A0, 01.01A01, max UDMA/133 [ 2.241583] ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.241957] ata1.00: ATA-9: WDC WDS120G1G0A-00SS50, Z3311000, max UDMA/133 [ 2.241960] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.243708] ata1.01: ATAPI: Optiarc DVD RW AD-7280S, 1.01, max UDMA/100 [ 2.244269] usb 1-1.1: New USB device found, idVendor=058f, idProduct=6362 [ 2.244273] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.244275] usb 1-1.1: Product: Mass Storage Device [ 2.244277] usb 1-1.1: Manufacturer: Generic [ 2.244279] usb 1-1.1: SerialNumber: ... [ 2.245037] ata2.00: configured for UDMA/133 [ 2.247874] ata2.01: configured for UDMA/133 [ 2.251029] ata1.00: configured for UDMA/133 [ 2.251944] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 2.252153] scsi host4: usb-storage 1-1.1:1.0 [ 2.252238] usbcore: registered new interface driver usb-storage [ 2.253986] usbcore: registered new interface driver uas [ 2.255682] ata1.01: configured for UDMA/100 [ 2.256593] scsi 0:0:0:0: Direct-Access ATA WDC WDS120G1G0A- 1000 PQ: 0 ANSI: 5 [ 2.268681] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.269381] scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-7280S 1.01 PQ: 0 ANSI: 5 [ 2.269423] sd 0:0:0:0: [sda] Write Protect is off [ 2.269428] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.272142] usb 4-1.1: New USB device found, idVendor=09da, idProduct=010b [ 2.272145] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.272147] usb 4-1.1: Product: PS/2+USB Mouse [ 2.272149] usb 4-1.1: Manufacturer: A4Tech [ 2.281485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.281786] scsi 1:0:0:0: Direct-Access ATA WDC WD10EALX-009 1H15 PQ: 0 ANSI: 5 [ 2.282407] sda: sda1 sda2 sda3 [ 2.282921] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.283126] hidraw: raw HID events driver (C) Jiri Kosina [ 2.289751] usbcore: registered new interface driver usbhid [ 2.289752] usbhid: USB HID core driver [ 2.290862] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.0/0003:09DA:010B.0001/input/input5 [ 2.290990] hid-generic 0003:09DA:010B.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1.1/input0 [ 2.294638] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.294763] sd 1:0:0:0: [sdb] Write Protect is off [ 2.294767] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.294798] scsi 1:0:1:0: Direct-Access ATA WDC WD10EZEX-75W 1A01 PQ: 0 ANSI: 5 [ 2.294805] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.338483] usb 4-1.2: new low-speed USB device number 4 using ehci-pci [ 2.340027] sd 1:0:1:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.340030] sd 1:0:1:0: [sdc] 4096-byte physical blocks [ 2.358620] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 > [ 2.358871] sd 1:0:1:0: [sdc] Write Protect is off [ 2.358875] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.359005] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.424146] usb 4-1.2: New USB device found, idVendor=1c4f, idProduct=0026 [ 2.424150] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.424153] usb 4-1.2: Product: USB Keyboard [ 2.424155] usb 4-1.2: Manufacturer: SIGMACHIP [ 2.427924] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:1C4F:0026.0002/input/input6 [ 2.479760] hid-generic 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.2/input0 [ 2.483788] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.1/0003:1C4F:0026.0003/input/input7 [ 2.535766] hid-generic 0003:1C4F:0026.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.2/input1 [ 2.599477] usb 4-1.6: new full-speed USB device number 5 using ehci-pci [ 2.677977] random: fast init done [ 2.680273] usb 4-1.6: New USB device found, idVendor=03f0, idProduct=2612 [ 2.680276] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.680279] usb 4-1.6: Product: Officejet K7100 [ 2.680281] usb 4-1.6: Manufacturer: HP [ 2.680283] usb 4-1.6: SerialNumber: ... [ 2.806584] sdc: sdc1 sdc2 sdc3 sdc4 [ 2.806780] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.807628] sd 1:0:1:0: [sdc] Attached SCSI disk [ 2.828376] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.828379] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.828686] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.971652] clocksource: Switched to clocksource tsc [ 3.189661] random: crng init done [ 3.189665] random: 7 urandom warning(s) missed due to ratelimiting [ 3.308464] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 3.310589] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 3.313084] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 3.316467] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 3.336832] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 3.340201] sd 4:0:0:1: [sde] Attached SCSI removable disk [ 3.342204] sd 4:0:0:3: [sdg] Attached SCSI removable disk [ 3.342953] sd 4:0:0:2: [sdf] Attached SCSI removable disk [ 3.580618] PM: Starting manual resume from disk [ 3.580622] PM: Hibernation image partition 8:34 present [ 3.580623] PM: Looking for hibernation image. [ 3.593589] PM: Image not found (code -22) [ 3.593591] PM: Hibernation image not present or could not be loaded. [ 4.025301] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.306624] systemd-journald[152]: Received SIGTERM from PID 1 (systemd). [ 4.355650] systemd: 19 output lines suppressed due to ratelimiting [ 4.420784] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 4.485335] systemd-fstab-generator[606]: ... [ 4.631493] EXT4-fs (sda2): re-mounted. Opts: acl [ 4.952359] systemd-journald[612]: Received request to flush runtime journal from PID 1 [ 5.472075] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.559278] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.559283] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.600624] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 5.600626] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.600627] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.600628] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.600629] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 5.600630] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.600632] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 5.600633] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 5.600634] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 5.614573] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.614613] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.614648] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.614767] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.614804] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.644804] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20160831/utaddress-247) [ 5.644809] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.644810] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20160831/utaddress-247) [ 5.644813] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.644813] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20160831/utaddress-247) [ 5.644815] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.644816] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.699908] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.704054] Uniform Multi-Platform E-IDE driver [ 5.782610] usblp 4-1.6:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2612 [ 5.782627] usbcore: registered new interface driver usblp [ 5.803509] nvidia: loading out-of-tree module taints kernel. [ 5.803515] nvidia: module license 'NVIDIA' taints kernel. [ 5.803516] Disabling lock debugging due to kernel taint [ 5.816496] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 5.816692] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 5.816696] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.107 Thu May 24 21:54:01 PDT 2018 [ 5.998760] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 5.998802] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 5.998838] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 5.998875] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 6.046037] intel_rapl: Found RAPL domain package [ 6.046039] intel_rapl: Found RAPL domain core [ 6.046040] intel_rapl: Found RAPL domain uncore [ 6.046045] intel_rapl: RAPL package 0 domain package locked by BIOS [ 6.469719] Adding 4191228k swap on /dev/sdb7. Priority:-1 extents:1 across:4191228k FS [ 6.469747] Adding 8191996k swap on /dev/sdc2. Priority:-2 extents:1 across:8191996k FS [ 6.477246] iTCO_vendor_support: vendor-support=0 [ 6.478264] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 6.478295] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 6.478932] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 11.629998] audit_printk_skb: 183 callbacks suppressed [ 11.908602] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.912434] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl [ 12.025229] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 12.358732] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: acl [ 12.411052] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: acl [ 12.483405] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: acl [ 12.511913] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: acl [ 12.550922] /dev/vmmon[3933]: Module vmmon: registered with major=10 minor=165 [ 12.550931] /dev/vmmon[3933]: Using tsc_khz as TSC frequency: 3292520 [ 12.550932] /dev/vmmon[3933]: Module vmmon: initialized [ 12.585075] Guest personality initialized and is inactive [ 12.585112] VMCI host device registered (name=vmci, major=10, minor=56) [ 12.585113] Initialized host personality [ 12.745186] NET: Registered protocol family 40 [ 12.802928] fuse init (API version 7.26) [ 13.173169] ppdev: user-space parallel port driver [ 13.321398] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 13.323443] sky2 0000:03:00.0 enp3s0: enabling interface [ 13.323538] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 13.326597] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 13.500211] r8169 0000:07:00.0 enp7s0: link down [ 13.500212] r8169 0000:07:00.0 enp7s0: link down [ 13.500278] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 13.556303] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 13.579143] Netfilter messages via NETLINK v0.30. [ 13.581103] ctnetlink v0.93: registering with nfnetlink. [ 14.010810] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 14.798082] usblp0: removed [ 14.801390] usblp 4-1.6:1.0: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2612 [ 15.799694] r8169 0000:07:00.0 enp7s0: link up [ 15.799701] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [ 15.837497] NET: Registered protocol family 17 [ 15.999796] userif-2: sent link down event. [ 15.999798] userif-2: sent link up event. [ 17.986651] audit_printk_skb: 516 callbacks suppressed [ 20.499061] NVRM: Your system is not currently configured to drive a VGA console [ 20.499068] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 20.499070] NVRM: requires the use of a text-mode VGA console. Use of other console [ 20.499073] NVRM: drivers including, but not limited to, vesafb, may result in [ 20.499075] NVRM: corruption and stability problems, and is not supported. [ 30.014967] audit_printk_skb: 48 callbacks suppressed [ 45.887954] audit_printk_skb: 3 callbacks suppressed [ 46.224949] Bluetooth: Core ver 2.22 [ 46.224962] NET: Registered protocol family 31 [ 46.224963] Bluetooth: HCI device and connection manager initialized [ 46.224966] Bluetooth: HCI socket layer initialized [ 46.224969] Bluetooth: L2CAP socket layer initialized [ 46.224973] Bluetooth: SCO socket layer initialized [ 46.252018] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 46.252019] Bluetooth: BNEP filters: protocol multicast [ 46.252022] Bluetooth: BNEP socket layer initialized [ 47.403597] /dev/vmmon[5258]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445202090363542462 new 18445202090372228017 attempts 1 [ 779.981216] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 1865.478910] audit_printk_skb: 15 callbacks suppressed [ 2877.991919] audit_printk_skb: 291 callbacks suppressed [ 2884.957226] audit_printk_skb: 84 callbacks suppressed [ 2909.650862] audit_printk_skb: 18 callbacks suppressed [ 2932.742489] audit_printk_skb: 24 callbacks suppressed [ 3037.480087] audit_printk_skb: 24 callbacks suppressed [ 3170.421140] audit_printk_skb: 33 callbacks suppressed [ 3242.766649] audit_printk_skb: 294 callbacks suppressed [ 3243.775383] usblp0: removed [ 3370.740686] audit_printk_skb: 9 callbacks suppressed [ 3377.250738] audit_printk_skb: 12 callbacks suppressed [ 3747.084152] audit_printk_skb: 12 callbacks suppressed [ 3752.792918] audit_printk_skb: 3 callbacks suppressed [ 3988.527422] audit_printk_skb: 6 callbacks suppressed [ 4016.321228] audit_printk_skb: 9 callbacks suppressed [ 4047.377203] audit_printk_skb: 24 callbacks suppressed [ 4067.659141] audit_printk_skb: 9 callbacks suppressed [ 4084.151265] audit_printk_skb: 3 callbacks suppressed [ 4222.844603] audit_printk_skb: 12 callbacks suppressed [ 4399.559550] audit_printk_skb: 6 callbacks suppressed [ 4412.828760] audit_printk_skb: 30 callbacks suppressed [ 4518.976058] audit_printk_skb: 33 callbacks suppressed [ 4612.839353] audit_printk_skb: 15 callbacks suppressed [ 4641.697000] audit_printk_skb: 9 callbacks suppressed [ 4651.973414] audit_printk_skb: 30 callbacks suppressed [ 4744.983682] audit_printk_skb: 3 callbacks suppressed [ 4829.243449] audit_printk_skb: 45 callbacks suppressed [ 4842.730318] audit_printk_skb: 9 callbacks suppressed [ 4855.470725] audit_printk_skb: 3 callbacks suppressed [ 4964.827114] audit_printk_skb: 9 callbacks suppressed [ 4971.449905] audit_printk_skb: 3 callbacks suppressed [ 4977.379456] audit_printk_skb: 9 callbacks suppressed [ 5410.269434] audit_printk_skb: 27 callbacks suppressed [ 5417.291996] audit_printk_skb: 6 callbacks suppressed [ 5437.280098] audit_printk_skb: 36 callbacks suppressed [ 5497.332866] audit_printk_skb: 42 callbacks suppressed [ 5999.983881] audit_printk_skb: 57 callbacks suppressed [ 6047.787861] audit_printk_skb: 63 callbacks suppressed [ 6136.434503] audit_printk_skb: 81 callbacks suppressed [ 6156.415414] audit_printk_skb: 180 callbacks suppressed [ 6166.935800] audit_printk_skb: 12 callbacks suppressed [ 6186.176536] audit_printk_skb: 3 callbacks suppressed [ 6484.959076] audit_printk_skb: 6 callbacks suppressed [ 6936.546680] audit_printk_skb: 3 callbacks suppressed [ 6941.995103] audit_printk_skb: 360 callbacks suppressed [ 6948.332445] audit_printk_skb: 129 callbacks suppressed [ 6953.690618] audit_printk_skb: 33 callbacks suppressed [ 6969.305539] audit_printk_skb: 9 callbacks suppressed [ 6990.206932] audit_printk_skb: 42 callbacks suppressed [ 7004.142411] audit_printk_skb: 6 callbacks suppressed [ 7025.152673] audit_printk_skb: 57 callbacks suppressed [ 7144.101009] audit_printk_skb: 33 callbacks suppressed [ 7151.463009] audit_printk_skb: 93 callbacks suppressed [ 7194.717535] audit_printk_skb: 12 callbacks suppressed [ 7413.718600] audit_printk_skb: 30 callbacks suppressed [ 7445.424909] audit_printk_skb: 9 callbacks suppressed [ 7590.402045] audit_printk_skb: 33 callbacks suppressed [ 7641.617837] audit_printk_skb: 30 callbacks suppressed [ 7687.551053] audit_printk_skb: 12 callbacks suppressed [ 7693.696184] audit_printk_skb: 30 callbacks suppressed [ 7796.523927] audit_printk_skb: 6 callbacks suppressed [ 7841.533059] audit_printk_skb: 39 callbacks suppressed [ 7846.977302] audit_printk_skb: 174 callbacks suppressed [ 7852.170913] audit_printk_skb: 114 callbacks suppressed [ 7897.345951] audit_printk_skb: 27 callbacks suppressed [ 8020.483275] audit_printk_skb: 153 callbacks suppressed [ 8045.884250] audit_printk_skb: 141 callbacks suppressed [ 8055.481096] audit_printk_skb: 3 callbacks suppressed [ 8078.438235] audit_printk_skb: 30 callbacks suppressed [ 8220.067708] audit_printk_skb: 24 callbacks suppressed [ 8225.600990] audit_printk_skb: 105 callbacks suppressed [ 8254.599573] audit_printk_skb: 12 callbacks suppressed [ 8259.719621] audit_printk_skb: 54 callbacks suppressed [ 8299.734172] audit_printk_skb: 12 callbacks suppressed [ 8320.489955] audit_printk_skb: 15 callbacks suppressed [ 8379.241927] audit_printk_skb: 15 callbacks suppressed [ 8445.434849] audit_printk_skb: 15 callbacks suppressed [ 8461.741637] audit_printk_skb: 6 callbacks suppressed [ 8483.950660] audit_printk_skb: 6 callbacks suppressed [ 8496.650533] audit_printk_skb: 33 callbacks suppressed [ 8516.348806] audit_printk_skb: 18 callbacks suppressed [ 8521.529886] audit_printk_skb: 42 callbacks suppressed [ 8528.232372] audit_printk_skb: 9 callbacks suppressed [ 8538.338481] audit_printk_skb: 3 callbacks suppressed [ 8566.294083] audit_printk_skb: 3 callbacks suppressed [ 8620.900693] audit_printk_skb: 72 callbacks suppressed [ 8629.404609] audit_printk_skb: 3 callbacks suppressed [ 8693.837385] audit_printk_skb: 12 callbacks suppressed [ 8715.668558] audit_printk_skb: 96 callbacks suppressed [ 8724.463737] audit_printk_skb: 3 callbacks suppressed [ 8909.188246] audit_printk_skb: 21 callbacks suppressed [ 8921.412511] audit_printk_skb: 21 callbacks suppressed [ 8981.427379] audit_printk_skb: 6 callbacks suppressed [ 9027.673217] audit_printk_skb: 12 callbacks suppressed [ 9156.283231] audit_printk_skb: 6 callbacks suppressed [11937.146444] audit_printk_skb: 426 callbacks suppressed [11942.910589] audit_printk_skb: 117 callbacks suppressed [11948.530954] audit_printk_skb: 12 callbacks suppressed [12008.232159] audit_printk_skb: 9 callbacks suppressed [12279.695370] audit_printk_skb: 6 callbacks suppressed [13356.927952] ISO 9660 Extensions: Microsoft Joliet Level 3 [13356.938649] ISOFS: changing to secondary root [13368.370951] audit_printk_skb: 12 callbacks suppressed [13441.100214] VFS: busy inodes on changed media or resized disk sr0 [14212.700519] audit_printk_skb: 348 callbacks suppressed [14229.114654] audit_printk_skb: 12 callbacks suppressed [14900.267627] usb 1-1.2: new high-speed USB device number 4 using ehci-pci [14900.347520] usb 1-1.2: New USB device found, idVendor=1f75, idProduct=0611 [14900.347523] usb 1-1.2: New USB device strings: Mfr=4, Product=5, SerialNumber=... [14900.347526] usb 1-1.2: Product: XT-U33502 [14900.347528] usb 1-1.2: Manufacturer: XinTop [14900.347530] usb 1-1.2: SerialNumber: ... [14900.347931] usb-storage 1-1.2:1.0: USB Mass Storage device detected [14900.348172] scsi host5: usb-storage 1-1.2:1.0 [14901.402725] scsi host5: scsi scan: INQUIRY result too short (5), using 36 [14901.402732] scsi 5:0:0:0: Direct-Access XinTop XT-U33502 PQ: 0 ANSI: 0 [14901.404247] sd 5:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB) [14901.405398] sd 5:0:0:0: [sdh] Write Protect is off [14901.405402] sd 5:0:0:0: [sdh] Mode Sense: 3b 00 00 00 [14901.406519] sd 5:0:0:0: [sdh] No Caching mode page found [14901.406526] sd 5:0:0:0: [sdh] Assuming drive cache: write through [14901.415938] sdh: sdh1 [14901.419509] sd 5:0:0:0: [sdh] Attached SCSI disk [14906.898604] EXT4-fs (sdh1): mounting ext3 file system using the ext4 subsystem [14906.943631] EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null) [14929.023930] usb 1-1.2: USB disconnect, device number 4 [14929.024347] Aborting journal on device sdh1-8. [14929.024365] JBD2: Error -5 detected when updating journal superblock for sdh1-8. [14953.771127] usb 1-1.2: new high-speed USB device number 5 using ehci-pci [14953.851235] usb 1-1.2: New USB device found, idVendor=1f75, idProduct=0611 [14953.851239] usb 1-1.2: New USB device strings: Mfr=4, Product=5, SerialNumber=... [14953.851241] usb 1-1.2: Product: XT-U33502 [14953.851243] usb 1-1.2: Manufacturer: XinTop [14953.851245] usb 1-1.2: SerialNumber: ... [14953.851645] usb-storage 1-1.2:1.0: USB Mass Storage device detected [14953.852636] scsi host5: usb-storage 1-1.2:1.0 [14954.906126] scsi host5: scsi scan: INQUIRY result too short (5), using 36 [14954.906133] scsi 5:0:0:0: Direct-Access XinTop XT-U33502 PQ: 0 ANSI: 0 [14954.906992] sd 5:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB) [14954.908115] sd 5:0:0:0: [sdh] Write Protect is off [14954.908120] sd 5:0:0:0: [sdh] Mode Sense: 3b 00 00 00 [14954.909272] sd 5:0:0:0: [sdh] No Caching mode page found [14954.909287] sd 5:0:0:0: [sdh] Assuming drive cache: write through [14954.954636] sdh: sdh1 sdh2 sdh3 sdh4 < sdh5 sdh6 > [14954.958385] sd 5:0:0:0: [sdh] Attached SCSI disk [14961.229788] EXT4-fs (sdh6): warning: checktime reached, running e2fsck is recommended [14961.232071] EXT4-fs (sdh6): recovery complete [14961.232605] EXT4-fs (sdh6): mounted filesystem with ordered data mode. Opts: (null) [14979.455770] usb 1-1.2: USB disconnect, device number 5 [14979.490964] Buffer I/O error on dev sdh6, logical block 27295744, lost sync page write [14979.490970] JBD2: Error -5 detected when updating journal superblock for sdh6-8. [14979.490972] Aborting journal on device sdh6-8. [14979.490975] Buffer I/O error on dev sdh6, logical block 27295744, lost sync page write [14979.491007] JBD2: Error -5 detected when updating journal superblock for sdh6-8. [14994.458704] sr 0:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [14994.458715] sr 0:0:1:0: [sr0] tag#0 Sense Key : Not Ready [current] [14994.458724] sr 0:0:1:0: [sr0] tag#0 Add. Sense: Medium not present - tray closed [14994.458728] sr 0:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 03 e8 00 00 01 00 [14994.458730] blk_update_request: I/O error, dev sr0, sector 4000 [15001.643680] usb 1-1.2: new high-speed USB device number 6 using ehci-pci [15001.723834] usb 1-1.2: New USB device found, idVendor=1f75, idProduct=0611 [15001.723837] usb 1-1.2: New USB device strings: Mfr=4, Product=5, SerialNumber=... [15001.723840] usb 1-1.2: Product: XT-U33502 [15001.723842] usb 1-1.2: Manufacturer: XinTop [15001.723843] usb 1-1.2: SerialNumber: ... [15001.724246] usb-storage 1-1.2:1.0: USB Mass Storage device detected [15001.724552] scsi host5: usb-storage 1-1.2:1.0 [15002.777676] scsi host5: scsi scan: INQUIRY result too short (5), using 36 [15002.777683] scsi 5:0:0:0: Direct-Access XinTop XT-U33502 PQ: 0 ANSI: 0 [15002.778704] sd 5:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/466 GiB) [15002.779792] sd 5:0:0:0: [sdh] Write Protect is off [15002.779813] sd 5:0:0:0: [sdh] Mode Sense: 3b 00 00 00 [15002.780953] sd 5:0:0:0: [sdh] No Caching mode page found [15002.780960] sd 5:0:0:0: [sdh] Assuming drive cache: write through [15002.787845] sdh: sdh1 [15002.791297] sd 5:0:0:0: [sdh] Attached SCSI disk [15010.296740] systemd-fstab-generator[19154]: ... [15010.487096] JFS: nTxBlock = 8192, nTxLock = 65536 [15010.533421] SGI XFS with ACLs, security attributes, realtime, no debug enabled [15012.037590] usb 1-1.2: reset high-speed USB device number 6 using ehci-pci [15012.902134] sdh: sdh1 [15014.041674] sdh: sdh1 [15014.048015] sdh: sdh1 [15024.278573] systemd-fstab-generator[19360]: ... [19550.945275] EXT4-fs (sdh1): mounting ext3 file system using the ext4 subsystem [19551.481720] EXT4-fs (sdh1): recovery complete [19551.482582] EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null) [19751.219271] audit_printk_skb: 345 callbacks suppressed [19757.392290] audit_printk_skb: 9 callbacks suppressed [19762.893103] audit_printk_skb: 51 callbacks suppressed [19773.323983] audit_printk_skb: 63 callbacks suppressed [19808.586837] audit_printk_skb: 51 callbacks suppressed [19835.608920] audit_printk_skb: 6 callbacks suppressed [19853.956983] audit_printk_skb: 24 callbacks suppressed [20624.064204] audit_printk_skb: 33 callbacks suppressed [20665.800139] audit_printk_skb: 3 callbacks suppressed [20866.617999] audit_printk_skb: 351 callbacks suppressed [20883.857474] audit_printk_skb: 9 callbacks suppressed [20892.869905] audit_printk_skb: 24 callbacks suppressed [20905.298407] audit_printk_skb: 144 callbacks suppressed [20929.680486] audit_printk_skb: 39 callbacks suppressed [20934.823707] audit_printk_skb: 21 callbacks suppressed [20965.209635] audit_printk_skb: 21 callbacks suppressed [21011.309693] audit_printk_skb: 12 callbacks suppressed [21462.123224] usb 1-1.2: USB disconnect, device number 6 [21462.155412] Buffer I/O error on dev sdh1, logical block 61014530, lost sync page write [21462.155418] JBD2: Error -5 detected when updating journal superblock for sdh1-8. [21462.155420] Aborting journal on device sdh1-8. [21462.155423] Buffer I/O error on dev sdh1, logical block 61014530, lost sync page write [21462.155425] JBD2: Error -5 detected when updating journal superblock for sdh1-8. [24587.144075] audit_printk_skb: 348 callbacks suppressed [24597.133765] audit_printk_skb: 12 callbacks suppressed [24656.719584] audit_printk_skb: 54 callbacks suppressed [24665.137803] audit_printk_skb: 60 callbacks suppressed [24679.315919] audit_printk_skb: 99 callbacks suppressed [24684.517578] audit_printk_skb: 3 callbacks suppressed [24771.439567] audit_printk_skb: 3 callbacks suppressed [24784.758859] audit_printk_skb: 3 callbacks suppressed [24860.683968] audit_printk_skb: 51 callbacks suppressed [24867.045060] audit_printk_skb: 12 callbacks suppressed [24874.791831] audit_printk_skb: 42 callbacks suppressed [24897.397372] audit_printk_skb: 9 callbacks suppressed [24932.766640] audit_printk_skb: 15 callbacks suppressed [25025.164816] audit_printk_skb: 57 callbacks suppressed [25035.805280] audit_printk_skb: 45 callbacks suppressed [25045.807819] audit_printk_skb: 6 callbacks suppressed [25154.784167] audit_printk_skb: 15 callbacks suppressed [25164.526866] audit_printk_skb: 27 callbacks suppressed [28327.134735] audit_printk_skb: 3 callbacks suppressed [29618.046402] audit_printk_skb: 363 callbacks suppressed [29641.727807] audit_printk_skb: 36 callbacks suppressed [29649.380039] audit_printk_skb: 33 callbacks suppressed [29681.673150] audit_printk_skb: 54 callbacks suppressed [29808.145589] audit_printk_skb: 3 callbacks suppressed [29823.482697] audit_printk_skb: 12 callbacks suppressed [29829.545586] audit_printk_skb: 15 callbacks suppressed [29865.715293] audit_printk_skb: 3 callbacks suppressed [29894.906393] audit_printk_skb: 18 callbacks suppressed [29941.713868] audit_printk_skb: 3 callbacks suppressed [29952.109715] audit_printk_skb: 39 callbacks suppressed [29984.407337] audit_printk_skb: 12 callbacks suppressed [30075.643996] usb 1-1.2: new high-speed USB device number 7 using ehci-pci [30075.730432] usb 1-1.2: New USB device found, idVendor=1687, idProduct=6998 [30075.730436] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [30075.730438] usb 1-1.2: Product: USB2.0 FlashDisk [30075.730440] usb 1-1.2: Manufacturer: Kingmax [30075.730442] usb 1-1.2: SerialNumber: ... [30075.730799] usb-storage 1-1.2:1.0: USB Mass Storage device detected [30075.732369] scsi host5: usb-storage 1-1.2:1.0 [30076.735274] scsi 5:0:0:0: Direct-Access Kingmax USB2.0 FlashDisk 8.07 PQ: 0 ANSI: 4 [30076.736761] sd 5:0:0:0: [sdh] 63488000 512-byte logical blocks: (32.5 GB/30.3 GiB) [30076.737886] sd 5:0:0:0: [sdh] Write Protect is off [30076.737890] sd 5:0:0:0: [sdh] Mode Sense: 23 00 00 00 [30076.739042] sd 5:0:0:0: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [30076.743888] sdh: sdh1 [30076.748896] sd 5:0:0:0: [sdh] Attached SCSI removable disk [30080.764281] FAT-fs (sdh1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [30140.352055] sdh: detected capacity change from 32505856000 to 0 [30143.061167] usb 1-1.2: USB disconnect, device number 7 [31930.919193] audit_printk_skb: 345 callbacks suppressed [31972.537195] audit_printk_skb: 12 callbacks suppressed [32007.118217] audit_printk_skb: 72 callbacks suppressed [32014.222916] audit_printk_skb: 18 callbacks suppressed [32019.768540] audit_printk_skb: 12 callbacks suppressed [32040.758150] audit_printk_skb: 12 callbacks suppressed [32045.798024] audit_printk_skb: 12 callbacks suppressed [32085.730932] audit_printk_skb: 3 callbacks suppressed [32092.062055] audit_printk_skb: 51 callbacks suppressed [32318.691984] audit_printk_skb: 9 callbacks suppressed [32361.923132] audit_printk_skb: 54 callbacks suppressed [32369.315503] audit_printk_skb: 6 callbacks suppressed [32491.284317] ide-cd driver 5.00 [32491.288656] ide-gd driver 1.18 [32491.297307] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [32491.419335] sd 0:0:0:0: Attached scsi generic sg0 type 0 [32491.419380] sr 0:0:1:0: Attached scsi generic sg1 type 5 [32491.419421] sd 1:0:0:0: Attached scsi generic sg2 type 0 [32491.419461] sd 1:0:1:0: Attached scsi generic sg3 type 0 [32491.419618] sd 4:0:0:0: Attached scsi generic sg4 type 0 [32491.419729] sd 4:0:0:1: Attached scsi generic sg5 type 0 [32491.419786] sd 4:0:0:2: Attached scsi generic sg6 type 0 [32491.419826] sd 4:0:0:3: Attached scsi generic sg7 type 0 [32492.814426] r8169 0000:07:00.0: invalid large VPD tag 7f at offset 0