[ 0.000000] Linux version 6.1.11-x64v1-xanmod1-1 (XXX@XXX) (gcc (GCC) 12.2.1 20230201, GNU ld (GNU Binutils) 2.40) #1 SMP PREEMPT_DYNAMIC Fri, 10 Feb 2023 14:41:57 +0000 [ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-xanmod root=UUID=HASH_DE0-9DE2-AB7A-F108-ADDAD952EACA rw rootflags=subvol=@ quiet loglevel=3 audit=0 nvme_load=yes nowatchdog mitigations=off [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 3632 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f77efff] usable [ 0.000000] BIOS-e820: [mem 0x000000005f77f000-0x000000005f8a1fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000005f8a2000-0x0000000063510fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000063511000-0x0000000063d71fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000063d72000-0x0000000063ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x0000000067ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000068400000-0x00000000685fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000068e00000-0x00000000707fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000108f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by Dell [ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 SMBIOS=0x5feca000 TPMFinalLog=0x63ca8000 ESRT=0x5fd90c18 MEMATTR=0x5ac1a018 [ 0.000000] SMBIOS 3.2 present. [ 0.000000] DMI: Dell Inc. XPS 17 9710/0Y1K2K, BIOS 1.17.0 12/12/2022 [ 0.000000] tsc: Detected 2300.000 MHz processor [ 0.000000] tsc: Detected 2304.000 MHz TSC [ 0.000004] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000005] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000009] last_pfn = 0x108f800 max_arch_pfn = 0x400000000 [ 0.000125] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000813] last_pfn = 0x64000 max_arch_pfn = 0x400000000 [ 0.008125] esrt: Reserving ESRT space from 0x000000005fd90c18 to 0x000000005fd90c78. [ 0.008134] Using GB pages for direct mapping [ 0.008240] Secure boot disabled [ 0.008240] RAMDISK: [mem 0x36d1b000-0x37684fff] [ 0.008241] ACPI: Early table checksum verification disabled [ 0.008243] ACPI: RSDP 0x0000000063FFE014 000024 (v02 DELL ) [ 0.008245] ACPI: XSDT 0x0000000063F77188 000104 (v01 DELL Dell Inc 00000002 01000013) [ 0.008249] ACPI: FACP 0x0000000063FF3000 000114 (v06 DELL Dell Inc 00000002 01000013) [ 0.008252] ACPI: DSDT 0x0000000063F94000 05C6D6 (v02 DELL Dell Inc 00000002 01000013) [ 0.008254] ACPI: FACS 0x0000000063CDB000 000040 [ 0.008255] ACPI: SSDT 0x0000000063FFA000 0024D0 (v02 CpuRef CpuSsdt 00003000 INTL 20191018) [ 0.008257] ACPI: SSDT 0x0000000063FF4000 005DD4 (v02 DptfTb DptfTabl 00001000 INTL 20191018) [ 0.008259] ACPI: HPET 0x0000000063FF2000 000038 (v01 DELL Dell Inc 00000002 01000013) [ 0.008261] ACPI: APIC 0x0000000063FF1000 00012C (v04 DELL Dell Inc 00000002 01000013) [ 0.008262] ACPI: SSDT 0x0000000063F93000 000B1D (v02 DELL DellRtd3 00001000 INTL 20191018) [ 0.008264] ACPI: NHLT 0x0000000063F92000 0002F1 (v00 DELL Dell Inc 00000002 01000013) [ 0.008265] ACPI: SSDT 0x0000000063F91000 00007B (v02 SaSsdt SaSsdt 00003000 INTL 20191018) [ 0.008267] ACPI: SSDT 0x0000000063F8F000 0012D2 (v02 INTEL IgfxSsdt 00003000 INTL 20191018) [ 0.008269] ACPI: SSDT 0x0000000063F83000 00B3B6 (v02 INTEL TcssSsdt 00001000 INTL 20191018) [ 0.008270] ACPI: SSDT 0x0000000063F82000 000CFC (v02 DELL UsbCTabl 00001000 INTL 20191018) [ 0.008272] ACPI: LPIT 0x0000000063F81000 0000CC (v01 DELL Dell Inc 00000002 01000013) [ 0.008274] ACPI: SSDT 0x0000000063F80000 000B75 (v02 DELL PtidDevc 00001000 INTL 20191018) [ 0.008276] ACPI: SSDT 0x0000000063F7F000 00012A (v02 DELL TbtTypeC 00000000 INTL 20191018) [ 0.008277] ACPI: DBGP 0x0000000063F7E000 000034 (v01 DELL Dell Inc 00000002 01000013) [ 0.008279] ACPI: DBG2 0x0000000063F7D000 000054 (v00 DELL Dell Inc 00000002 01000013) [ 0.008281] ACPI: BOOT 0x0000000063F7C000 000028 (v01 DELL CBX3 00000002 01000013) [ 0.008282] ACPI: SSDT 0x0000000063F7B000 00060E (v02 DELL Tpm2Tabl 00001000 INTL 20191018) [ 0.008284] ACPI: TPM2 0x0000000063F7A000 00004C (v04 DELL Dell Inc 00000002 01000013) [ 0.008285] ACPI: MSDM 0x0000000063F79000 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.008287] ACPI: DMAR 0x0000000063F78000 0000E8 (v02 INTEL Dell Inc 00000002 01000013) [ 0.008289] ACPI: SSDT 0x0000000063F70000 006037 (v02 DELL NvdTable 00001000 INTL 20191018) [ 0.008291] ACPI: SSDT 0x0000000063FFD000 000C3B (v02 DELL xh_Dell_ 00000000 INTL 20191018) [ 0.008293] ACPI: MCFG 0x0000000063F6F000 00003C (v01 00000001 00000000) [ 0.008295] ACPI: SSDT 0x0000000063F6E000 000144 (v02 Intel ADebTabl 00001000 INTL 20191018) [ 0.008296] ACPI: PTDT 0x0000000063F6D000 000D44 (v00 DELL Dell Inc 00000005 MSFT 0100000D) [ 0.008298] ACPI: BGRT 0x0000000063F6C000 000038 (v01 DELL Dell Inc 00000002 01000013) [ 0.008299] ACPI: FPDT 0x0000000063F6B000 000034 (v01 DELL Dell Inc 00000002 01000013) [ 0.008300] ACPI: Reserving FACP table memory at [mem 0x63ff3000-0x63ff3113] [ 0.008301] ACPI: Reserving DSDT table memory at [mem 0x63f94000-0x63ff06d5] [ 0.008302] ACPI: Reserving FACS table memory at [mem 0x63cdb000-0x63cdb03f] [ 0.008302] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffc4cf] [ 0.008303] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff9dd3] [ 0.008303] ACPI: Reserving HPET table memory at [mem 0x63ff2000-0x63ff2037] [ 0.008304] ACPI: Reserving APIC table memory at [mem 0x63ff1000-0x63ff112b] [ 0.008304] ACPI: Reserving SSDT table memory at [mem 0x63f93000-0x63f93b1c] [ 0.008305] ACPI: Reserving NHLT table memory at [mem 0x63f92000-0x63f922f0] [ 0.008305] ACPI: Reserving SSDT table memory at [mem 0x63f91000-0x63f9107a] [ 0.008305] ACPI: Reserving SSDT table memory at [mem 0x63f8f000-0x63f902d1] [ 0.008306] ACPI: Reserving SSDT table memory at [mem 0x63f83000-0x63f8e3b5] [ 0.008306] ACPI: Reserving SSDT table memory at [mem 0x63f82000-0x63f82cfb] [ 0.008307] ACPI: Reserving LPIT table memory at [mem 0x63f81000-0x63f810cb] [ 0.008307] ACPI: Reserving SSDT table memory at [mem 0x63f80000-0x63f80b74] [ 0.008307] ACPI: Reserving SSDT table memory at [mem 0x63f7f000-0x63f7f129] [ 0.008308] ACPI: Reserving DBGP table memory at [mem 0x63f7e000-0x63f7e033] [ 0.008308] ACPI: Reserving DBG2 table memory at [mem 0x63f7d000-0x63f7d053] [ 0.008309] ACPI: Reserving BOOT table memory at [mem 0x63f7c000-0x63f7c027] [ 0.008309] ACPI: Reserving SSDT table memory at [mem 0x63f7b000-0x63f7b60d] [ 0.008310] ACPI: Reserving TPM2 table memory at [mem 0x63f7a000-0x63f7a04b] [ 0.008310] ACPI: Reserving MSDM table memory at [mem 0x63f79000-0x63f79054] [ 0.008310] ACPI: Reserving DMAR table memory at [mem 0x63f78000-0x63f780e7] [ 0.008311] ACPI: Reserving SSDT table memory at [mem 0x63f70000-0x63f76036] [ 0.008311] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffdc3a] [ 0.008312] ACPI: Reserving MCFG table memory at [mem 0x63f6f000-0x63f6f03b] [ 0.008312] ACPI: Reserving SSDT table memory at [mem 0x63f6e000-0x63f6e143] [ 0.008313] ACPI: Reserving PTDT table memory at [mem 0x63f6d000-0x63f6dd43] [ 0.008313] ACPI: Reserving BGRT table memory at [mem 0x63f6c000-0x63f6c037] [ 0.008314] ACPI: Reserving FPDT table memory at [mem 0x63f6b000-0x63f6b033] [ 0.008493] No NUMA configuration found [ 0.008494] Faking a node at [mem 0x0000000000000000-0x000000108f7fffff] [ 0.008497] NODE_DATA(0) allocated [mem 0x108f7d5000-0x108f7fffff] [ 0.008545] Zone ranges: [ 0.008546] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008547] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.008547] Normal [mem 0x0000000100000000-0x000000108f7fffff] [ 0.008548] Device empty [ 0.008549] Movable zone start for each node [ 0.008550] Early memory node ranges [ 0.008550] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.008551] node 0: [mem 0x0000000000100000-0x000000005f77efff] [ 0.008552] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] [ 0.008552] node 0: [mem 0x0000000100000000-0x000000108f7fffff] [ 0.008555] Initmem setup node 0 [mem 0x0000000000001000-0x000000108f7fffff] [ 0.008558] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008575] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.010282] On node 0, zone DMA32: 18560 pages in unavailable ranges [ 0.078177] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.078188] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.078533] Reserving Intel graphics memory at [mem 0x6c800000-0x707fffff] [ 0.078912] ACPI: PM-Timer IO Port: 0x1808 [ 0.078916] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.078917] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.078918] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.078918] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.078918] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.078919] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.078919] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.078919] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.078920] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.078920] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.078920] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.078921] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.078921] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.078922] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.078922] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.078922] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.078957] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.078959] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.078960] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.078963] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.078964] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.078969] e820: update [mem 0x5aa75000-0x5aaecfff] usable ==> reserved [ 0.078975] TSC deadline timer available [ 0.078975] smpboot: Allowing 16 CPUs, 0 hotplug CPUs [ 0.078984] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.078985] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.078986] PM: hibernation: Registered nosave memory: [mem 0x5aa75000-0x5aaecfff] [ 0.078986] PM: hibernation: Registered nosave memory: [mem 0x5f77f000-0x5f8a1fff] [ 0.078987] PM: hibernation: Registered nosave memory: [mem 0x5f8a2000-0x63510fff] [ 0.078987] PM: hibernation: Registered nosave memory: [mem 0x63511000-0x63d71fff] [ 0.078987] PM: hibernation: Registered nosave memory: [mem 0x63d72000-0x63ffefff] [ 0.078988] PM: hibernation: Registered nosave memory: [mem 0x64000000-0x67ffffff] [ 0.078989] PM: hibernation: Registered nosave memory: [mem 0x68000000-0x683fffff] [ 0.078989] PM: hibernation: Registered nosave memory: [mem 0x68400000-0x685fffff] [ 0.078989] PM: hibernation: Registered nosave memory: [mem 0x68600000-0x68dfffff] [ 0.078990] PM: hibernation: Registered nosave memory: [mem 0x68e00000-0x707fffff] [ 0.078990] PM: hibernation: Registered nosave memory: [mem 0x70800000-0xbfffffff] [ 0.078990] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff] [ 0.078991] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfed1ffff] [ 0.078991] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.078991] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfeffffff] [ 0.078992] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.078993] [mem 0x70800000-0xbfffffff] available for PCI devices [ 0.078993] Booting paravirtualized kernel on bare hardware [ 0.078994] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns [ 0.081958] setup_percpu: NR_CPUS:512 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.082171] percpu: Embedded 53 pages/cpu s180224 r8192 d28672 u262144 [ 0.082175] pcpu-alloc: s180224 r8192 d28672 u262144 alloc=1*2097152 [ 0.082176] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.082189] Fallback order for Node 0: 0 [ 0.082191] Built 1 zonelists, mobility grouping on. Total pages: 16446146 [ 0.082192] Policy zone: Normal [ 0.082193] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-xanmod root=UUID=HASH_DE0-9DE2-AB7A-F108-ADDAD952EACA rw rootflags=subvol=@ quiet loglevel=3 audit=0 nvme_load=yes nowatchdog mitigations=off [ 0.082255] Unknown kernel command line parameters "BOOT_IMAGE=/@/boot/vmlinuz-linux-xanmod nvme_load=yes", will be passed to user space. [ 0.082271] random: crng init done [ 0.084083] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.084981] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.085092] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.085106] software IO TLB: area num 16. [ 0.178615] Memory: 65438188K/66829432K available (14337K kernel code, 1987K rwdata, 4600K rodata, 2192K init, 5696K bss, 1390984K reserved, 0K cma-reserved) [ 0.178678] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.179024] Dynamic Preempt: voluntary [ 0.179051] rcu: Preemptible hierarchical RCU implementation. [ 0.179052] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16. [ 0.179052] Trampoline variant of Tasks RCU enabled. [ 0.179052] Tracing variant of Tasks RCU enabled. [ 0.179053] rcu: RCU calculated value of scheduler-enlistment delay is 50 jiffies. [ 0.179053] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.179080] NR_IRQS: 33024, nr_irqs: 2184, preallocated irqs: 16 [ 0.179364] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.179563] Console: colour dummy device 80x25 [ 0.179572] printk: console [tty0] enabled [ 0.179583] ACPI: Core revision 20220331 [ 0.179795] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.179796] APIC: Switch to symmetric I/O mode setup [ 0.179798] DMAR: Host address width 39 [ 0.179799] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.179803] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.179805] DMAR: DRHD base: 0x000000fed84000 flags: 0x0 [ 0.179808] DMAR: dmar1: reg_base_addr fed84000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.179810] DMAR: DRHD base: 0x000000fed85000 flags: 0x0 [ 0.179813] DMAR: dmar2: reg_base_addr fed85000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.179815] DMAR: DRHD base: 0x000000fed86000 flags: 0x0 [ 0.179818] DMAR: dmar3: reg_base_addr fed86000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.179819] DMAR: DRHD base: 0x000000fed87000 flags: 0x0 [ 0.179822] DMAR: dmar4: reg_base_addr fed87000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.179824] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.179828] DMAR: dmar5: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.179830] DMAR: RMRR base: 0x0000006c000000 end: 0x000000707fffff [ 0.179832] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 5 [ 0.179832] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.179833] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.182093] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.182094] x2apic enabled [ 0.182133] Switched APIC routing to cluster x2apic. [ 0.186615] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns [ 0.186619] Calibrating delay loop (skipped), value calculated using timer frequency.. 4608.00 BogoMIPS (lpj=4608000) [ 0.186620] pid_max: default: 32768 minimum: 301 [ 0.188617] LSM: Security Framework initializing [ 0.188617] landlock: Up and running. [ 0.188617] Yama: becoming mindful. [ 0.188617] AppArmor: AppArmor initialized [ 0.188617] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.188617] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.188617] CPU0: Thermal monitoring enabled (TM1) [ 0.188617] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.188617] process: using mwait in idle threads [ 0.188617] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.188617] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.188617] Spectre V2 : User space: Vulnerable [ 0.188617] Speculative Store Bypass: Vulnerable [ 0.188617] Freeing SMP alternatives memory: 40K [ 0.188617] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-11800H @ 2.30GHz (family: 0x6, model: 0x8d, stepping: 0x1) [ 0.188617] cblist_init_generic: Setting adjustable number of callback queues. [ 0.188617] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.188617] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.188617] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.188617] ... version: 5 [ 0.188617] ... bit width: 48 [ 0.188617] ... generic registers: 8 [ 0.188617] ... value mask: 0000ffffffffffff [ 0.188617] ... max period: 00007fffffffffff [ 0.188617] ... fixed-purpose events: 4 [ 0.188617] ... event mask: 0001000f000000ff [ 0.188617] Estimated ratio of average max frequency by base frequency (times 1024): 2003 [ 0.188617] rcu: Hierarchical SRCU implementation. [ 0.188617] rcu: Max phase no-delay instances is 800. [ 0.188617] smp: Bringing up secondary CPUs ... [ 0.188617] x86: Booting SMP configuration: [ 0.188617] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 [ 0.215029] smp: Brought up 1 node, 16 CPUs [ 0.215029] smpboot: Max logical packages: 1 [ 0.215029] smpboot: Total of 16 processors activated (73728.00 BogoMIPS) [ 0.218340] devtmpfs: initialized [ 0.218340] x86/mm: Memory block size: 2048MB [ 0.218761] ACPI: PM: Registering ACPI NVS region [mem 0x63511000-0x63d71fff] (8785920 bytes) [ 0.218761] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns [ 0.218765] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.218796] pinctrl core: initialized pinctrl subsystem [ 0.219027] PM: RTC time: 19:53:06, date: 2023-02-24 [ 0.219404] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.219720] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.219951] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.220168] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.220236] thermal_sys: Registered thermal governor 'fair_share' [ 0.220237] thermal_sys: Registered thermal governor 'bang_bang' [ 0.220237] thermal_sys: Registered thermal governor 'step_wise' [ 0.220238] thermal_sys: Registered thermal governor 'user_space' [ 0.220238] thermal_sys: Registered thermal governor 'power_allocator' [ 0.220250] cpuidle: using governor ladder [ 0.220250] cpuidle: using governor menu [ 0.220250] Simple Boot Flag at 0x47 set to 0x80 [ 0.220250] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.220639] PCI: MMCONFIG for domain 0000 [bus 00-ab] at [mem 0xc0000000-0xcabfffff] (base 0xc0000000) [ 0.220643] PCI: MMCONFIG at [mem 0xc0000000-0xcabfffff] reserved in E820 [ 0.220653] PCI: Using configuration type 1 for base access [ 0.220919] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.221884] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.222623] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.222624] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.222625] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.222625] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.222675] ACPI: Added _OSI(Module Device) [ 0.222676] ACPI: Added _OSI(Processor Device) [ 0.222676] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.222677] ACPI: Added _OSI(Processor Aggregator Device) [ 0.282629] ACPI: 14 ACPI AML tables successfully acquired and loaded [ 0.297438] ACPI: Dynamic OEM Table Load: [ 0.297446] ACPI: SSDT 0xFFFF97DA416E2600 0001CB (v02 PmRef Cpu0Psd 00003000 INTL 20191018) [ 0.298206] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.299507] ACPI: Dynamic OEM Table Load: [ 0.299513] ACPI: SSDT 0xFFFF97DA422B2800 000496 (v02 PmRef Cpu0Cst 00003001 INTL 20191018) [ 0.300434] ACPI: Dynamic OEM Table Load: [ 0.300438] ACPI: SSDT 0xFFFF97DA422B3000 00051E (v02 PmRef Cpu0Ist 00003000 INTL 20191018) [ 0.301269] ACPI: Dynamic OEM Table Load: [ 0.301273] ACPI: SSDT 0xFFFF97DA418A5C00 0002B4 (v02 PmRef Cpu0Hwp 00003000 INTL 20191018) [ 0.302345] ACPI: Dynamic OEM Table Load: [ 0.302350] ACPI: SSDT 0xFFFF97DA422AB000 0008E7 (v02 PmRef ApIst 00003000 INTL 20191018) [ 0.303241] ACPI: Dynamic OEM Table Load: [ 0.303245] ACPI: SSDT 0xFFFF97DA422B1800 00048A (v02 PmRef ApHwp 00003000 INTL 20191018) [ 0.304207] ACPI: Dynamic OEM Table Load: [ 0.304212] ACPI: SSDT 0xFFFF97DA422B3800 0004D4 (v02 PmRef ApPsd 00003000 INTL 20191018) [ 0.305086] ACPI: Dynamic OEM Table Load: [ 0.305090] ACPI: SSDT 0xFFFF97DA422B2000 00048A (v02 PmRef ApCst 00003000 INTL 20191018) [ 0.311058] ACPI: EC: EC started [ 0.311059] ACPI: EC: interrupt blocked [ 0.313715] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.313718] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.313719] ACPI: Interpreter enabled [ 0.313783] ACPI: PM: (supports S0 S4 S5) [ 0.313783] ACPI: Using IOAPIC for interrupt routing [ 0.313835] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.313836] PCI: Using E820 reservations for host bridge windows [ 0.315213] ACPI: Enabled 10 GPEs in block 00 to 7F [ 0.315831] ACPI: PM: Power Resource [PG00] [ 0.316095] ACPI: PM: Power Resource [PG01] [ 0.321426] ACPI: PM: Power Resource [PG02] [ 0.321661] ACPI: PM: Power Resource [PG03] [ 0.324975] ACPI: PM: Power Resource [BTRT] [ 0.332991] ACPI: PM: Power Resource [V0PR] [ 0.333080] ACPI: PM: Power Resource [V1PR] [ 0.333165] ACPI: PM: Power Resource [V2PR] [ 0.337315] ACPI: PM: Power Resource [WRST] [ 0.339732] ACPI: PM: Power Resource [TBT0] [ 0.339766] ACPI: PM: Power Resource [TBT1] [ 0.339797] ACPI: PM: Power Resource [D3C] [ 0.776276] ACPI: PM: Power Resource [PIN] [ 0.776635] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-ab]) [ 0.776640] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.778167] acpi PNP0A08:00: _OSC: platform does not support [AER] [ 0.781201] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC] [ 0.784626] PCI host bridge to bus 0000:00 [ 0.784627] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.784628] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.784629] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.784630] pci_bus 0000:00: root bus resource [mem 0x70800000-0xbfffffff window] [ 0.784631] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.784632] pci_bus 0000:00: root bus resource [bus 00-ab] [ 0.784728] pci 0000:00:00.0: [8086:9a36] type 00 class 0x060000 [ 0.784807] pci 0000:00:01.0: [8086:9a01] type 01 class 0x060400 [ 0.784864] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.784886] pci 0000:00:01.0: PTM enabled (root), 4ns granularity [ 0.785308] pci 0000:00:01.1: [8086:9a05] type 01 class 0x060400 [ 0.785390] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.785420] pci 0000:00:01.1: PTM enabled (root), 4ns granularity [ 0.785915] pci 0000:00:02.0: [8086:9a60] type 00 class 0x030000 [ 0.785923] pci 0000:00:02.0: reg 0x10: [mem 0x618c000000-0x618cffffff 64bit] [ 0.785928] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.785931] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.785946] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.785947] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.785949] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.785975] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] [ 0.785977] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.785981] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] [ 0.785982] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.786103] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000 [ 0.786120] pci 0000:00:04.0: reg 0x10: [mem 0x618d180000-0x618d19ffff 64bit] [ 0.786396] pci 0000:00:07.0: [8086:9a2b] type 01 class 0x060400 [ 0.786440] pci 0000:00:07.0: Overriding RP PIO Log Size to 4 [ 0.786472] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.787069] pci 0000:00:07.1: [8086:9a2d] type 01 class 0x060400 [ 0.787106] pci 0000:00:07.1: Overriding RP PIO Log Size to 4 [ 0.787136] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.787816] pci 0000:00:07.2: [8086:9a2f] type 01 class 0x060400 [ 0.787859] pci 0000:00:07.2: Overriding RP PIO Log Size to 4 [ 0.787890] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold [ 0.788544] pci 0000:00:07.3: [8086:9a31] type 01 class 0x060400 [ 0.788592] pci 0000:00:07.3: Overriding RP PIO Log Size to 4 [ 0.788624] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold [ 0.789229] pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000 [ 0.789236] pci 0000:00:0a.0: reg 0x10: [mem 0x618d1d0000-0x618d1d7fff 64bit] [ 0.789256] pci 0000:00:0a.0: enabling Extended Tags [ 0.789338] pci 0000:00:0d.0: [8086:9a17] type 00 class 0x0c0330 [ 0.789350] pci 0000:00:0d.0: reg 0x10: [mem 0x618d1c0000-0x618d1cffff 64bit] [ 0.789420] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.789713] pci 0000:00:0d.2: [8086:9a1f] type 00 class 0x0c0340 [ 0.789725] pci 0000:00:0d.2: reg 0x10: [mem 0x618d140000-0x618d17ffff 64bit] [ 0.789733] pci 0000:00:0d.2: reg 0x18: [mem 0x618d1ea000-0x618d1eafff 64bit] [ 0.789776] pci 0000:00:0d.2: supports D1 D2 [ 0.789776] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.789896] pci 0000:00:0d.3: [8086:9a21] type 00 class 0x0c0340 [ 0.789908] pci 0000:00:0d.3: reg 0x10: [mem 0x618d100000-0x618d13ffff 64bit] [ 0.789916] pci 0000:00:0d.3: reg 0x18: [mem 0x618d1e9000-0x618d1e9fff 64bit] [ 0.789952] pci 0000:00:0d.3: supports D1 D2 [ 0.789952] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.790096] pci 0000:00:12.0: [8086:43fc] type 00 class 0x070000 [ 0.790115] pci 0000:00:12.0: reg 0x10: [mem 0x618d1b0000-0x618d1bffff 64bit] [ 0.790185] pci 0000:00:12.0: PME# supported from D0 D3hot [ 0.790473] pci 0000:00:14.0: [8086:43ed] type 00 class 0x0c0330 [ 0.790491] pci 0000:00:14.0: reg 0x10: [mem 0x618d1a0000-0x618d1affff 64bit] [ 0.790567] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.790839] pci 0000:00:14.2: [8086:43ef] type 00 class 0x050000 [ 0.790857] pci 0000:00:14.2: reg 0x10: [mem 0x618d1e0000-0x618d1e3fff 64bit] [ 0.790869] pci 0000:00:14.2: reg 0x18: [mem 0x618d1e8000-0x618d1e8fff 64bit] [ 0.791006] pci 0000:00:14.3: [8086:43f0] type 00 class 0x028000 [ 0.791025] pci 0000:00:14.3: reg 0x10: [mem 0x618d1dc000-0x618d1dffff 64bit] [ 0.791143] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.791429] pci 0000:00:15.0: [8086:43e8] type 00 class 0x0c8000 [ 0.791459] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.791935] pci 0000:00:15.1: [8086:43e9] type 00 class 0x0c8000 [ 0.791960] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.792340] pci 0000:00:16.0: [8086:43e0] type 00 class 0x078000 [ 0.792361] pci 0000:00:16.0: reg 0x10: [mem 0x618d1e5000-0x618d1e5fff 64bit] [ 0.792441] pci 0000:00:16.0: PME# supported from D3hot [ 0.792733] pci 0000:00:1c.0: [8086:43be] type 01 class 0x060400 [ 0.792835] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.792870] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 0.793416] pci 0000:00:1f.0: [8086:4389] type 00 class 0x060100 [ 0.793755] pci 0000:00:1f.3: [8086:43c8] type 00 class 0x040100 [ 0.793796] pci 0000:00:1f.3: reg 0x10: [mem 0x618d1d8000-0x618d1dbfff 64bit] [ 0.793848] pci 0000:00:1f.3: reg 0x20: [mem 0x618d000000-0x618d0fffff 64bit] [ 0.793949] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.794252] pci 0000:00:1f.4: [8086:43a3] type 00 class 0x0c0500 [ 0.794273] pci 0000:00:1f.4: reg 0x10: [mem 0x618d1e4000-0x618d1e40ff 64bit] [ 0.794294] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.794508] pci 0000:00:1f.5: [8086:43a4] type 00 class 0x0c8000 [ 0.794526] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.794652] pci 0000:01:00.0: [10de:25a2] type 00 class 0x030200 [ 0.794660] pci 0000:01:00.0: reg 0x10: [mem 0xa9000000-0xa9ffffff] [ 0.794668] pci 0000:01:00.0: reg 0x14: [mem 0x6000000000-0x60ffffffff 64bit pref] [ 0.794675] pci 0000:01:00.0: reg 0x1c: [mem 0x6100000000-0x6101ffffff 64bit pref] [ 0.794680] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f] [ 0.794685] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.794733] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.794787] pci 0000:01:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.794928] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.794930] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.794932] pci 0000:00:01.0: bridge window [mem 0xa9000000-0xa9ffffff] [ 0.794934] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6101ffffff 64bit pref] [ 0.795264] pci 0000:02:00.0: [144d:a80a] type 00 class 0x010802 [ 0.795279] pci 0000:02:00.0: reg 0x10: [mem 0xaa100000-0xaa103fff 64bit] [ 0.795533] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.795536] pci 0000:00:01.1: bridge window [mem 0xaa100000-0xaa1fffff] [ 0.795572] pci 0000:00:07.0: PCI bridge to [bus 03-2c] [ 0.795577] pci 0000:00:07.0: bridge window [mem 0x9c000000-0xa81fffff] [ 0.795581] pci 0000:00:07.0: bridge window [mem 0x6110000000-0x612bffffff 64bit pref] [ 0.795614] pci 0000:00:07.1: PCI bridge to [bus 2d-56] [ 0.795618] pci 0000:00:07.1: bridge window [mem 0x8e000000-0x9a1fffff] [ 0.795622] pci 0000:00:07.1: bridge window [mem 0x6130000000-0x614bffffff 64bit pref] [ 0.795655] pci 0000:00:07.2: PCI bridge to [bus 57-80] [ 0.795659] pci 0000:00:07.2: bridge window [mem 0x80000000-0x8c1fffff] [ 0.795664] pci 0000:00:07.2: bridge window [mem 0x6150000000-0x616bffffff 64bit pref] [ 0.795698] pci 0000:00:07.3: PCI bridge to [bus 81-aa] [ 0.795702] pci 0000:00:07.3: bridge window [mem 0x72000000-0x7e1fffff] [ 0.795706] pci 0000:00:07.3: bridge window [mem 0x6170000000-0x618bffffff 64bit pref] [ 0.795784] pci 0000:ab:00.0: [10ec:5260] type 00 class 0xff0000 [ 0.795800] pci 0000:ab:00.0: reg 0x10: [mem 0xaa000000-0xaa000fff] [ 0.795939] pci 0000:ab:00.0: supports D1 D2 [ 0.795940] pci 0000:ab:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.796125] pci 0000:00:1c.0: PCI bridge to [bus ab] [ 0.796129] pci 0000:00:1c.0: bridge window [mem 0xaa000000-0xaa0fffff] [ 0.813316] Low-power S0 idle used by default for system suspend [ 0.824201] ACPI: EC: interrupt unblocked [ 0.824202] ACPI: EC: event unblocked [ 0.824213] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.824214] ACPI: EC: GPE=0x6e [ 0.824216] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC initialization complete [ 0.824217] ACPI: \_SB_.PC00.LPCB.ECDV: EC: Used to handle transactions and events [ 0.824302] iommu: Default domain type: Translated [ 0.824302] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.824302] SCSI subsystem initialized [ 0.824302] libata version 3.00 loaded. [ 0.824302] ACPI: bus type USB registered [ 0.824302] usbcore: registered new interface driver usbfs [ 0.824302] usbcore: registered new interface driver hub [ 0.824302] usbcore: registered new device driver usb [ 0.824302] pps_core: LinuxPPS API ver. 1 registered [ 0.824302] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.824302] PTP clock support registered [ 0.824302] EDAC MC: Ver: 3.0.0 [ 0.825026] Registered efivars operations [ 0.825026] NetLabel: Initializing [ 0.825026] NetLabel: domain hash size = 128 [ 0.825026] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.825026] NetLabel: unlabeled traffic allowed by default [ 0.825026] mctp: management component transport protocol core [ 0.825026] NET: Registered PF_MCTP protocol family [ 0.825026] PCI: Using ACPI for IRQ routing [ 0.830009] PCI: pci_cache_line_size set to 64 bytes [ 0.830416] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window [ 0.830711] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.830712] e820: reserve RAM buffer [mem 0x5aa75000-0x5bffffff] [ 0.830713] e820: reserve RAM buffer [mem 0x5f77f000-0x5fffffff] [ 0.830714] e820: reserve RAM buffer [mem 0x108f800000-0x108fffffff] [ 0.830719] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.830719] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.830719] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.830719] vgaarb: loaded [ 0.830719] clocksource: Switched to clocksource tsc-early [ 0.830719] VFS: Disk quotas dquot_6.6.0 [ 0.830727] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.830786] AppArmor: AppArmor Filesystem Enabled [ 0.830800] pnp: PnP ACPI init [ 0.830943] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.830944] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.831028] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.831925] pnp 00:05: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] [ 0.831944] system 00:05: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.831945] system 00:05: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.831946] system 00:05: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.831947] system 00:05: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.831948] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.831949] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.831950] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.832857] system 00:06: [io 0x1800-0x18fe] could not be reserved [ 0.832859] system 00:06: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.832860] system 00:06: [mem 0xfe04c000-0xfe04ffff] has been reserved [ 0.832861] system 00:06: [mem 0xfe050000-0xfe0affff] has been reserved [ 0.832862] system 00:06: [mem 0xfe0d0000-0xfe0fffff] has been reserved [ 0.832863] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.832864] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.832865] system 00:06: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.832866] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 0.832866] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.833148] system 00:07: [io 0x2000-0x20fe] has been reserved [ 0.837013] pnp: PnP ACPI: found 9 devices [ 0.842220] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.842250] NET: Registered PF_INET protocol family [ 0.842364] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.844229] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.844269] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.844496] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.844939] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.845064] TCP: Hash tables configured (established 524288 bind 65536) [ 0.845217] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear) [ 0.845392] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.845495] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.845577] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.845581] NET: Registered PF_XDP protocol family [ 0.845583] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.845586] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.845592] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.845595] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] [ 0.845597] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.845598] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit] [ 0.845600] pci 0000:00:07.0: BAR 13: assigned [io 0x5000-0x5fff] [ 0.845601] pci 0000:00:07.1: BAR 13: assigned [io 0x6000-0x6fff] [ 0.845602] pci 0000:00:07.2: BAR 13: assigned [io 0x7000-0x7fff] [ 0.845603] pci 0000:00:07.3: BAR 13: assigned [io 0x8000-0x8fff] [ 0.845604] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.845605] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit] [ 0.845658] clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.845660] pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit] [ 0.845714] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.845715] pci 0000:00:1f.5: BAR 0: assigned [mem 0x70800000-0x70800fff] [ 0.845726] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref] [ 0.845727] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref] [ 0.845728] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.845729] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.845732] pci 0000:00:01.0: bridge window [mem 0xa9000000-0xa9ffffff] [ 0.845733] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6101ffffff 64bit pref] [ 0.845736] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.845739] pci 0000:00:01.1: bridge window [mem 0xaa100000-0xaa1fffff] [ 0.845744] pci 0000:00:07.0: PCI bridge to [bus 03-2c] [ 0.845745] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] [ 0.845748] pci 0000:00:07.0: bridge window [mem 0x9c000000-0xa81fffff] [ 0.845750] pci 0000:00:07.0: bridge window [mem 0x6110000000-0x612bffffff 64bit pref] [ 0.845753] pci 0000:00:07.1: PCI bridge to [bus 2d-56] [ 0.845754] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff] [ 0.845757] pci 0000:00:07.1: bridge window [mem 0x8e000000-0x9a1fffff] [ 0.845759] pci 0000:00:07.1: bridge window [mem 0x6130000000-0x614bffffff 64bit pref] [ 0.845762] pci 0000:00:07.2: PCI bridge to [bus 57-80] [ 0.845763] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff] [ 0.845766] pci 0000:00:07.2: bridge window [mem 0x80000000-0x8c1fffff] [ 0.845768] pci 0000:00:07.2: bridge window [mem 0x6150000000-0x616bffffff 64bit pref] [ 0.845771] pci 0000:00:07.3: PCI bridge to [bus 81-aa] [ 0.845773] pci 0000:00:07.3: bridge window [io 0x8000-0x8fff] [ 0.845775] pci 0000:00:07.3: bridge window [mem 0x72000000-0x7e1fffff] [ 0.845777] pci 0000:00:07.3: bridge window [mem 0x6170000000-0x618bffffff 64bit pref] [ 0.845781] pci 0000:00:1c.0: PCI bridge to [bus ab] [ 0.845789] pci 0000:00:1c.0: bridge window [mem 0xaa000000-0xaa0fffff] [ 0.845796] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.845797] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.845797] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.845798] pci_bus 0000:00: resource 7 [mem 0x70800000-0xbfffffff window] [ 0.845799] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] [ 0.845799] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.845800] pci_bus 0000:01: resource 1 [mem 0xa9000000-0xa9ffffff] [ 0.845801] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6101ffffff 64bit pref] [ 0.845802] pci_bus 0000:02: resource 1 [mem 0xaa100000-0xaa1fffff] [ 0.845802] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.845803] pci_bus 0000:03: resource 1 [mem 0x9c000000-0xa81fffff] [ 0.845804] pci_bus 0000:03: resource 2 [mem 0x6110000000-0x612bffffff 64bit pref] [ 0.845804] pci_bus 0000:2d: resource 0 [io 0x6000-0x6fff] [ 0.845805] pci_bus 0000:2d: resource 1 [mem 0x8e000000-0x9a1fffff] [ 0.845805] pci_bus 0000:2d: resource 2 [mem 0x6130000000-0x614bffffff 64bit pref] [ 0.845806] pci_bus 0000:57: resource 0 [io 0x7000-0x7fff] [ 0.845807] pci_bus 0000:57: resource 1 [mem 0x80000000-0x8c1fffff] [ 0.845807] pci_bus 0000:57: resource 2 [mem 0x6150000000-0x616bffffff 64bit pref] [ 0.845808] pci_bus 0000:81: resource 0 [io 0x8000-0x8fff] [ 0.845809] pci_bus 0000:81: resource 1 [mem 0x72000000-0x7e1fffff] [ 0.845809] pci_bus 0000:81: resource 2 [mem 0x6170000000-0x618bffffff 64bit pref] [ 0.845810] pci_bus 0000:ab: resource 1 [mem 0xaa000000-0xaa0fffff] [ 0.846544] PCI: CLS 0 bytes, default 64 [ 0.846557] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.846558] software IO TLB: mapped [mem 0x0000000056a75000-0x000000005aa75000] (64MB) [ 0.846604] Trying to unpack rootfs image as initramfs... [ 0.846628] resource sanity check: requesting [mem 0xfedc0000-0xfedcdfff], which spans more than pnp 00:05 [mem 0xfedc0000-0xfedc7fff] [ 0.846629] caller __uncore_imc_init_box+0xbc/0x100 mapping multiple BARs [ 0.854836] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns [ 0.854901] clocksource: Switched to clocksource tsc [ 0.855312] Initialise system trusted keyrings [ 0.855319] Key type blacklist registered [ 0.855352] workingset: timestamp_bits=36 max_order=24 bucket_order=0 [ 0.856363] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.856440] fuse: init (API version 7.37) [ 0.856565] integrity: Platform Keyring initialized [ 0.856566] integrity: Machine keyring initialized [ 0.864160] Key type asymmetric registered [ 0.864161] Asymmetric key parser 'x509' registered [ 0.878343] Freeing initrd memory: 9640K [ 0.880761] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.880773] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.880803] io scheduler mq-deadline registered [ 0.881290] pcieport 0000:00:01.0: PME: Signaling with IRQ 126 [ 0.881507] pcieport 0000:00:01.1: PME: Signaling with IRQ 127 [ 0.881730] pcieport 0000:00:07.0: PME: Signaling with IRQ 128 [ 0.881748] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.881984] pcieport 0000:00:07.1: PME: Signaling with IRQ 129 [ 0.881998] pcieport 0000:00:07.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.882179] pcieport 0000:00:07.2: PME: Signaling with IRQ 130 [ 0.882193] pcieport 0000:00:07.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.882369] pcieport 0000:00:07.3: PME: Signaling with IRQ 131 [ 0.882381] pcieport 0000:00:07.3: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.882571] pcieport 0000:00:1c.0: PME: Signaling with IRQ 132 [ 0.882656] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.882871] Monitor-Mwait will be used to enter C-1 state [ 0.882874] Monitor-Mwait will be used to enter C-2 state [ 0.882876] Monitor-Mwait will be used to enter C-3 state [ 0.882878] ACPI: \_SB_.PR00: Found 3 idle states [ 0.885689] ACPI: AC: AC Adapter [AC] (off-line) [ 0.885730] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.885750] ACPI: button: Lid Switch [LID0] [ 0.885765] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.885778] ACPI: button: Power Button [PBTN] [ 0.885791] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.885800] ACPI: button: Sleep Button [SBTN] [ 0.889918] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.890880] serial 0000:00:12.0: enabling device (0000 -> 0002) [ 0.892403] hpet_acpi_add: no address or irqs in _CRS [ 0.892419] Linux agpgart interface v0.103 [ 0.894064] tpm_tis STM0125:00: 2.0 TPM (device-id 0x0, rev-id 78) [ 0.911290] loop: module loaded [ 0.911401] tun: Universal TUN/TAP device driver, 1.6 [ 0.911413] PPP generic driver version 2.4.2 [ 0.911438] VFIO - User Level meta-driver version: 0.3 [ 0.911493] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.912378] i8042: Warning: Keylock active [ 0.916790] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.916793] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.916857] mousedev: PS/2 mouse device common for all mice [ 0.917121] rtc_cmos 00:01: RTC can wake from S4 [ 0.918484] rtc_cmos 00:01: registered as rtc0 [ 0.918861] rtc_cmos 00:01: setting system clock to 2023-02-24T19:53:06 UTC (1677268386) [ 0.918883] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.918887] i2c_dev: i2c /dev entries driver [ 0.920073] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.920560] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.920583] device-mapper: uevent: version 1.0.3 [ 0.920642] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.920646] intel_pstate: Intel P-state driver initializing [ 0.922180] intel_pstate: HWP enabled [ 0.923174] ledtrig-cpu: registered to indicate activity on CPUs [ 0.923193] efifb: probing for efifb [ 0.923206] efifb: showing boot graphics [ 0.927717] efifb: framebuffer at 0x4000000000, using 36032k, total 36032k [ 0.927718] efifb: mode is 3840x2400x32, linelength=15360, pages=1 [ 0.927719] efifb: scrolling: redraw [ 0.927720] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.927765] fbcon: Deferring console take-over [ 0.927765] fb0: EFI VGA frame buffer device [ 0.928201] intel_pmc_core INT33A1:00: initialized [ 0.928348] NET: Registered PF_INET6 protocol family [ 0.931058] Segment Routing with IPv6 [ 0.931063] In-situ OAM (IOAM) with IPv6 [ 0.931084] NET: Registered PF_PACKET protocol family [ 0.931207] Key type dns_resolver registered [ 0.933514] microcode: sig=0x806d1, pf=0x2, revision=0x3e [ 0.934108] ACPI: battery: Slot [BAT0] (battery present) [ 0.934339] microcode: Microcode Update Driver: v2.2. [ 0.935240] resctrl: L2 allocation detected [ 0.935248] IPI shorthand broadcast: enabled [ 0.935270] sched_clock: Marking stable (928145856, 7075732)->(1027809295, -92587707) [ 0.935766] registered taskstats version 1 [ 0.935769] Loading compiled-in X.509 certificates [ 0.936451] Loaded X.509 cert 'Build time autogenerated kernel key: ebaf25d69e317a85569e7d6f5b33370f68a6eca5' [ 0.936877] zswap: loaded using pool lz4/z3fold [ 0.937266] Key type .fscrypt registered [ 0.937266] Key type fscrypt-provisioning registered [ 0.937591] Key type trusted registered [ 0.939818] Key type encrypted registered [ 0.939820] AppArmor: AppArmor sha1 policy hashing enabled [ 0.939859] integrity: Loading X.509 certificate: UEFI:db [ 0.939877] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios DB Key: 637fa7a9f74471b406de0511557071fd41dd5487' [ 0.939878] integrity: Loading X.509 certificate: UEFI:db [ 0.939889] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios FW Aux Authority 2018: dd4df7c3f5ce7e5a77847915abc37b031f6b10bd' [ 0.939890] integrity: Loading X.509 certificate: UEFI:db [ 0.939906] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.939907] integrity: Loading X.509 certificate: UEFI:db [ 0.939921] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.940123] Loading compiled-in module X.509 certificates [ 0.940574] Loaded X.509 cert 'Build time autogenerated kernel key: ebaf25d69e317a85569e7d6f5b33370f68a6eca5' [ 0.940575] ima: Allocated hash algorithm: sha1 [ 0.958556] ima: No architecture policies found [ 0.958565] evm: Initialising EVM extended attributes: [ 0.958565] evm: security.selinux [ 0.958566] evm: security.SMACK64 [ 0.958566] evm: security.SMACK64EXEC [ 0.958567] evm: security.SMACK64TRANSMUTE [ 0.958567] evm: security.SMACK64MMAP [ 0.958568] evm: security.apparmor [ 0.958568] evm: security.ima [ 0.958568] evm: security.capability [ 0.958569] evm: HMAC attrs: 0x1 [ 0.960441] PM: Magic number: 11:135:901 [ 0.960454] clocksource clocksource0: hash matches [ 0.960553] RAS: Correctable Errors collector initialized. [ 0.960861] Freeing unused decrypted memory: 2036K [ 0.961310] Freeing unused kernel image (initmem) memory: 2192K [ 0.984898] Write protecting the kernel read-only data: 22528k [ 0.985975] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 0.986379] Freeing unused kernel image (rodata/data gap) memory: 1544K [ 0.992586] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.992590] Run /init as init process [ 0.992591] with arguments: [ 0.992592] /init [ 0.992592] with environment: [ 0.992592] HOME=/ [ 0.992593] TERM=linux [ 0.992593] BOOT_IMAGE=/@/boot/vmlinuz-linux-xanmod [ 0.992594] nvme_load=yes [ 1.011331] fbcon: Taking over console [ 1.011382] Console: switching to colour frame buffer device 240x75 [ 1.072446] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 1.072454] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 1.073532] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 1.073817] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 1.073821] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 1.073826] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.073857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.073859] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.073860] usb usb1: Product: xHCI Host Controller [ 1.073862] usb usb1: Manufacturer: Linux 6.1.11-x64v1-xanmod1-1 xhci-hcd [ 1.073863] usb usb1: SerialNumber: ... [ 1.073950] hub 1-0:1.0: USB hub found [ 1.073955] hub 1-0:1.0: 1 port detected [ 1.074027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.074029] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.074031] usb usb2: Product: xHCI Host Controller [ 1.074032] usb usb2: Manufacturer: Linux 6.1.11-x64v1-xanmod1-1 xhci-hcd [ 1.074033] usb usb2: SerialNumber: ... [ 1.074085] hub 2-0:1.0: USB hub found [ 1.074092] hub 2-0:1.0: 4 ports detected [ 1.074511] rtsx_pci 0000:ab:00.0: enabling device (0000 -> 0002) [ 1.075348] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.075357] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.075909] nvme 0000:02:00.0: platform quirk: setting simple suspend [ 1.075946] nvme nvme0: pci function 0000:02:00.0 [ 1.076467] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 1.076895] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.076897] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.076899] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed [ 1.076922] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.076924] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.076925] usb usb3: Product: xHCI Host Controller [ 1.076926] usb usb3: Manufacturer: Linux 6.1.11-x64v1-xanmod1-1 xhci-hcd [ 1.076927] usb usb3: SerialNumber: ... [ 1.077071] hub 3-0:1.0: USB hub found [ 1.077094] hub 3-0:1.0: 16 ports detected [ 1.078634] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.078636] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.078637] usb usb4: Product: xHCI Host Controller [ 1.078637] usb usb4: Manufacturer: Linux 6.1.11-x64v1-xanmod1-1 xhci-hcd [ 1.078638] usb usb4: SerialNumber: ... [ 1.078711] hub 4-0:1.0: USB hub found [ 1.078726] hub 4-0:1.0: 6 ports detected [ 1.078919] usb: port power management may be unreliable [ 1.089074] nvme nvme0: Shutdown timeout set to 10 seconds [ 1.092835] nvme nvme0: 16/0/0 default/read/poll queues [ 1.095034] nvme0n1: p1 p2 [ 1.138618] raid6: avx512x4 gen() 56080 MB/s [ 1.172618] raid6: avx512x2 gen() 65536 MB/s [ 1.206618] raid6: avx512x1 gen() 58152 MB/s [ 1.240618] raid6: avx2x4 gen() 48448 MB/s [ 1.274618] raid6: avx2x2 gen() 48898 MB/s [ 1.308619] raid6: avx2x1 gen() 38230 MB/s [ 1.308620] raid6: using algorithm avx512x2 gen() 65536 MB/s [ 1.342618] raid6: .... xor() 39861 MB/s, rmw enabled [ 1.342619] raid6: using avx512x2 recovery algorithm [ 1.343331] xor: automatically using best checksumming function avx [ 1.361916] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 1.363012] BTRFS: device fsid HASH_DE0-9DE2-AB7A-F108-ADDAD952EACA devid 1 transid 1373 /dev/nvme0n1p2 scanned by (udev-worker) (248) [ 1.380321] BTRFS info (device nvme0n1p2): using crc32c (crc32c-intel) checksum algorithm [ 1.380325] BTRFS info (device nvme0n1p2): using free space tree [ 1.386635] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 1.386838] BTRFS info (device nvme0n1p2): enabling ssd optimizations [ 1.435856] systemd[1]: Inserted module 'autofs4' [ 1.445561] systemd[1]: systemd 253-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 1.445566] systemd[1]: Detected architecture x86-64. [ 1.445963] systemd[1]: Hostname set to ... [ 1.475741] systemd[1]: bpf-lsm: BPF LSM hook not enabled in the kernel, BPF LSM not supported [ 1.524914] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd [ 1.539941] usb 2-4: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00 [ 1.539950] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.539953] usb 2-4: Product: SanDisk 3.2Gen1 [ 1.539956] usb 2-4: Manufacturer: USB [ 1.539958] usb 2-4: SerialNumber: ... [ 1.586722] usb 3-4: New USB device found, idVendor=0781, idProduct=55ae, bcdDevice=30.01 [ 1.586725] usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 1.586727] usb 3-4: Product: Extreme 55AE [ 1.586728] usb 3-4: Manufacturer: SanDisk [ 1.586728] usb 3-4: SerialNumber: ... [ 1.588828] systemd[1]: /usr/lib/systemd/system/grub-btrfs-snapper.service:11: Ignoring unknown escape sequences: "if [[ -z $(/usr/bin/findmnt -n / | /usr/bin/grep "\.snapshots") ]]; then if [ -s "${GRUB_BTRFS_GRUB_DIRNAME:-/boot/grub}/grub-btrfs.cfg" ]; then /etc/grub.d/41_snapshots-btrfs; else ${GRUB_BTRFS_MKCONFIG:-grub-mkconfig} -o ${GRUB_BTRFS_GRUB_DIRNAME:-/boot/grub}/grub.cfg; fi; fi" [ 1.589371] systemd[1]: Queued start job for default target Graphical Interface. [ 1.601718] systemd[1]: Created slice Slice /system/getty. [ 1.601872] systemd[1]: Created slice Slice /system/modprobe. [ 1.601993] systemd[1]: Created slice Slice /system/systemd-fsck. [ 1.602097] systemd[1]: Created slice User and Session Slice. [ 1.602127] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.602146] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.602217] systemd[1]: Set up automount ... [ 1.602237] systemd[1]: Reached target Local Encrypted Volumes. [ 1.602244] systemd[1]: Reached target Login Prompts. [ 1.602250] systemd[1]: Reached target Local Integrity Protected Volumes. [ 1.602260] systemd[1]: Reached target Remote File Systems. [ 1.602266] systemd[1]: Reached target Slice Units. [ 1.602272] systemd[1]: Reached target Mounting snaps. [ 1.602278] systemd[1]: Reached target Mounted snaps. [ 1.602284] systemd[1]: Reached target Swaps. [ 1.602291] systemd[1]: Reached target System Time Set. [ 1.602303] systemd[1]: Reached target Local Verity Protected Volumes. [ 1.602330] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 1.602677] systemd[1]: Listening on LVM2 poll daemon socket. [ 1.603287] systemd[1]: Listening on Process Core Dump Socket. [ 1.603345] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.603390] systemd[1]: Listening on Journal Socket. [ 1.603794] systemd[1]: Listening on udev Control Socket. [ 1.603835] systemd[1]: Listening on udev Kernel Socket. [ 1.604329] systemd[1]: Mounting Huge Pages File System... [ 1.604793] systemd[1]: Mounting POSIX Message Queue File System... [ 1.605284] systemd[1]: Mounting Kernel Debug File System... [ 1.605335] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 1.605888] systemd[1]: Starting Create List of Static Device Nodes... [ 1.606446] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 1.607029] systemd[1]: Starting Load Kernel Module configfs... [ 1.607642] systemd[1]: Starting Load Kernel Module dm_mod... [ 1.608238] systemd[1]: Starting Load Kernel Module drm... [ 1.608856] systemd[1]: Starting Load Kernel Module fuse... [ 1.609836] systemd[1]: Starting Load Kernel Module loop... [ 1.611697] systemd[1]: Starting Journal Service... [ 1.612472] systemd[1]: Starting Load Kernel Modules... [ 1.612503] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-HASH_466-8928-06B7-84F7-7C8411FA7941). [ 1.613091] systemd[1]: Starting Remount Root and Kernel File Systems... [ 1.613700] systemd[1]: Starting Coldplug All udev Devices... [ 1.614684] systemd[1]: Mounted Huge Pages File System. [ 1.614760] systemd[1]: Mounted POSIX Message Queue File System. [ 1.614803] systemd[1]: Mounted Kernel Debug File System. [ 1.614924] systemd[1]: Finished Create List of Static Device Nodes. [ 1.616351] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.616448] systemd[1]: Finished Load Kernel Module configfs. [ 1.616590] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.616682] systemd[1]: Finished Load Kernel Module dm_mod. [ 1.616843] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.616916] systemd[1]: Finished Load Kernel Module fuse. [ 1.617059] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.617131] systemd[1]: Finished Load Kernel Module loop. [ 1.617836] systemd[1]: Mounting FUSE Control File System... [ 1.618691] systemd[1]: Mounting Kernel Configuration File System... [ 1.618772] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met. [ 1.619514] systemd[1]: Mounted FUSE Control File System. [ 1.619663] ACPI: bus type drm_connector registered [ 1.620392] systemd[1]: XXX@XXX: Deactivated successfully. [ 1.620520] systemd[1]: Finished Load Kernel Module drm. [ 1.620665] systemd[1]: Mounted Kernel Configuration File System. [ 1.622500] systemd-journald[363]: Collecting audit messages is disabled. [ 1.648657] systemd[1]: Started Journal Service. [ 1.716732] usb 3-10: new full-speed USB device number 3 using xhci_hcd [ 1.741781] BTRFS info (device nvme0n1p2: state M): use zstd compression, level 3 [ 1.741785] BTRFS info (device nvme0n1p2: state M): turning on async discard [ 1.829439] nvidia: loading out-of-tree module taints kernel. [ 1.829450] nvidia: module license 'NVIDIA' taints kernel. [ 1.829452] Disabling lock debugging due to kernel taint [ 1.841403] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 1.849881] usb 3-10: New USB device found, idVendor=27c6, idProduct=63ac, bcdDevice= 1.00 [ 1.849885] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.849887] usb 3-10: Product: Goodix USB2.0 MISC [ 1.849888] usb 3-10: Manufacturer: Goodix Technology Co., Ltd. [ 1.849889] usb 3-10: SerialNumber: ... [ 1.852417] nvidia-nvlink: Nvlink Core is being initialized, major device number 236 [ 1.853432] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 1.899130] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 525.89.02 Wed Feb 1 23:23:25 UTC 2023 [ 1.899545] Consider using thermal netlink events interface [ 1.901056] input: Intel HID events as /devices/platform/INTC1051:00/input/input5 [ 1.902035] intel-hid INTC1051:00: platform supports 5 button array [ 1.907046] input: Intel HID 5 button array as /devices/platform/INTC1051:00/input/input6 [ 1.917502] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint. [ 1.927960] hid: raw HID events driver (C) Jiri Kosina [ 1.932362] wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found [ 1.949903] nvidia-uvm: Loaded the UVM driver, major device number 511. [ 1.961910] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 1.963644] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.963953] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.964067] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.964275] Bluetooth: Core ver 2.22 [ 1.964293] NET: Registered PF_BLUETOOTH protocol family [ 1.964294] Bluetooth: HCI device and connection manager initialized [ 1.964299] Bluetooth: HCI socket layer initialized [ 1.964301] Bluetooth: L2CAP socket layer initialized [ 1.964304] Bluetooth: SCO socket layer initialized [ 1.964368] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.964811] ACPI: bus type thunderbolt registered [ 1.964817] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 1.972642] usb 3-11: new high-speed USB device number 4 using xhci_hcd [ 2.001642] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 2.002146] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 2.011801] pstore: Using crash dump compression: zstd [ 2.014623] spi-nor spi0.0: w25q256 (32768 Kbytes) [ 2.015530] pstore: Registered efi as persistent store backend [ 2.017976] Intel(R) Wireless WiFi driver for Linux [ 2.018835] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 2.022277] Creating 1 MTD partitions on "0000:00:1f.5": [ 2.022281] 0x000000000000-0x000002000000 : "BIOS" [ 2.022672] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 2.024581] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 2.030317] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 2.034803] Bluetooth: HCI UART driver ver 2.3 [ 2.034806] Bluetooth: HCI UART protocol H4 registered [ 2.034808] Bluetooth: HCI UART protocol BCSP registered [ 2.035358] Bluetooth: HCI UART protocol LL registered [ 2.035361] Bluetooth: HCI UART protocol ATH3K registered [ 2.035711] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 2.035798] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 525.89.02 Wed Feb 1 23:09:40 UTC 2023 [ 2.036505] Bluetooth: HCI UART protocol Intel registered [ 2.036665] Bluetooth: HCI UART protocol Broadcom registered [ 2.036673] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 2.036675] Bluetooth: HCI UART protocol QCA registered [ 2.036677] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.036677] Bluetooth: HCI UART protocol AG6XX registered [ 2.036679] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.036681] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 2.036682] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 2.036686] Bluetooth: HCI UART protocol Marvell registered [ 2.038664] cryptd: max_cpu_qlen set to 1000 [ 2.038839] intel_rapl_common: Found RAPL domain package [ 2.054557] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 2.054562] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 2.054598] AVX2 version of gcm_enc/dec engaged. [ 2.055031] AES CTR mode by8 optimization enabled [ 2.062289] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 2.062405] snd_hda_intel 0000:00:1f.3: SoundWire enabled on CannonLake+ platform, using SOF driver [ 2.067197] dell_smm_hwmon: unable to get SMM Dell signature [ 2.090901] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver [ 2.090918] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 2.091227] iwlwifi 0000:00:14.3: loaded firmware version 72.daa05125.0 QuZ-a0-hr-b0-72.ucode op_mode iwlmvm [ 2.120167] intel_rapl_common: Found RAPL domain package [ 2.120173] intel_rapl_common: Found RAPL domain core [ 2.120175] intel_rapl_common: Found RAPL domain uncore [ 2.120179] intel_rapl_common: Found RAPL domain psys [ 2.123888] usb 3-11: New USB device found, idVendor=0c45, idProduct=672e, bcdDevice= 9.11 [ 2.123893] usb 3-11: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 2.123895] usb 3-11: Product: Integrated_Webcam_HD [ 2.123897] usb 3-11: Manufacturer: CN07JX4K8LG0018ID1V0A00 [ 2.136743] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 2.161087] iTCO_vendor_support: vendor-support=0 [ 2.162134] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 2.167982] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 2.168429] Console: switching to colour dummy device 80x25 [ 2.168800] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.168911] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 2.169804] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.169940] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.172679] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 2.173548] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12) [ 2.175725] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 2.177511] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 2.179589] input: Dell Privacy Driver as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/HASH_81F-4092-3EA9-1A5C-71732B19BEFB/input/input8 [ 2.179708] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input9 [ 2.194565] intel_tcc_cooling: Programmable TCC Offset detected [ 2.206303] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 [ 2.206472] sof-audio-pci-intel-tgl 0000:00:1f.3: SoundWire enabled on CannonLake+ platform, using SOF driver [ 2.206500] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) [ 2.206654] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 2.212261] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [ 2.212383] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 2.214633] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX203, REV=0x351 [ 2.214671] thermal thermal_zone9: failed to read out thermal zone (-61) [ 2.248777] usb 3-14: new full-speed USB device number 5 using xhci_hcd [ 2.342693] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100 [ 2.388947] usb 3-14: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02 [ 2.388951] usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.408758] iwlwifi 0000:00:14.3: base HW address: XXX [ 2.426322] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0 [ 2.544807] input: DELL0A5D:00 06CB:CE7E Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-11/i2c-DELL0A5D:00/0018:06CB:CE7E.0001/input/input10 [ 2.544968] input: DELL0A5D:00 06CB:CE7E Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-11/i2c-DELL0A5D:00/0018:06CB:CE7E.0001/input/input11 [ 2.545030] hid-generic 0018:06CB:CE7E.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0A5D:00 06CB:CE7E] on i2c-DELL0A5D:00 [ 2.608483] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=1 [ 2.613458] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.624110] input: DELL0A5D:00 06CB:CE7E Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-11/i2c-DELL0A5D:00/0018:06CB:CE7E.0001/input/input13 [ 2.625225] input: DELL0A5D:00 06CB:CE7E Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-11/i2c-DELL0A5D:00/0018:06CB:CE7E.0001/input/input14 [ 2.625302] hid-multitouch 0018:06CB:CE7E.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0A5D:00 06CB:CE7E] on i2c-DELL0A5D:00 [ 2.631331] BTRFS error (device nvme0n1p2): bad fsid on logical 900939776 mirror 1 [ 2.631464] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 900939776 (dev /dev/nvme0n1p2 sector 1776032) [ 2.631481] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 900943872 (dev /dev/nvme0n1p2 sector 1776040) [ 2.631495] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 900947968 (dev /dev/nvme0n1p2 sector 1776048) [ 2.631510] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 900952064 (dev /dev/nvme0n1p2 sector 1776056) [ 2.636270] BTRFS error (device nvme0n1p2): bad fsid on logical 852410368 mirror 1 [ 2.636382] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 852410368 (dev /dev/nvme0n1p2 sector 1681248) [ 2.636397] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 852414464 (dev /dev/nvme0n1p2 sector 1681256) [ 2.636410] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 852418560 (dev /dev/nvme0n1p2 sector 1681264) [ 2.636422] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 852422656 (dev /dev/nvme0n1p2 sector 1681272) [ 2.646456] systemd-journald[363]: Received client request to flush runtime journal. [ 2.779934] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7 [ 2.990549] loop0: detected capacity change from 0 to 8 [ 3.089494] usb-storage 2-4:1.0: USB Mass Storage device detected [ 3.089586] scsi host0: usb-storage 2-4:1.0 [ 3.090005] usbcore: registered new interface driver usb-storage [ 3.105182] scsi host1: uas [ 3.105253] usbcore: registered new interface driver uas [ 3.354420] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1 [ 3.355440] ACPI: video: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 3.355466] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input16 [ 3.360704] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.361862] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input17 [ 3.362811] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.374917] fbcon: i915drmfb (fb0) is primary device [ 3.374965] Console: switching to colour frame buffer device 240x75 [ 3.374970] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.443853] ACPI Warning: \_SB.NPCF._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20220331/nsarguments-61) [ 3.444557] ACPI Warning: \_SB.PC00.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20220331/nsarguments-61) [ 3.520399] mc: Linux media interface: v0.10 [ 3.536647] ucsi_acpi USBC000:00: PPM init failed (-110) [ 4.105723] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 4.174345] scsi 1:0:0:0: Direct-Access SanDisk Extreme 55AE 3001 PQ: 0 ANSI: 6 [ 4.179319] scsi 1:0:0:1: Enclosure SanDisk SES Device 3001 PQ: 0 ANSI: 6 [ 4.182150] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.182217] scsi 1:0:0:1: Attached scsi generic sg1 type 13 [ 4.182325] sd 0:0:0:0: Attached scsi generic sg2 type 0 [ 4.182461] sd 1:0:0:0: [sda] 1953459617 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.182709] sd 1:0:0:0: [sda] Write Protect is off [ 4.182710] sd 1:0:0:0: [sda] Mode Sense: 37 00 10 00 [ 4.182725] sd 0:0:0:0: [sdb] Media removed, stopped polling [ 4.182893] sd 0:0:0:0: [sdb] Attached SCSI removable disk [ 4.183206] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 4.183331] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 4.183332] sd 1:0:0:0: [sda] Optimal transfer size 1048576 bytes [ 4.208413] sda: sda1 [ 4.208538] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.212638] usbcore: registered new interface driver btusb [ 4.212978] scsi 1:0:0:1: Failed to get diagnostic page 0x1 [ 4.212982] scsi 1:0:0:1: Failed to bind enclosure -19 [ 4.213005] ses 1:0:0:1: Attached Enclosure device [ 4.213710] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018 [ 4.214746] Bluetooth: hci0: Device revision is 2 [ 4.214749] Bluetooth: hci0: Secure boot is enabled [ 4.214749] Bluetooth: hci0: OTP lock is enabled [ 4.214750] Bluetooth: hci0: API lock is enabled [ 4.214750] Bluetooth: hci0: Debug lock is disabled [ 4.214751] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 4.215064] videodev: Linux video capture interface: v2.00 [ 4.216402] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode [ 4.224063] usb 3-11: Found UVC 1.00 device Integrated_Webcam_HD (0c45:672e) [ 4.231677] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 4 [ 4.232957] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 4.232960] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 4.232967] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 4.234573] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input18 [ 4.235611] usb 3-11: Found UVC 1.00 device Integrated_Webcam_HD (0c45:672e) [ 4.243943] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.2/input/input19 [ 4.244004] usbcore: registered new interface driver uvcvideo [ 4.259056] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi [ 4.259161] Bluetooth: hci0: Boot Address: 0x24800 [ 4.259162] Bluetooth: hci0: Firmware Version: 15-45.22 [ 4.337784] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 4.337791] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 4.350918] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 [ 4.351130] sof_sdw sof_sdw: ASoC: Parent card not yet available, widget card binding deferred [ 5.489974] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 [ 5.509894] input: sof-soundwire Headset Jack as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input20 [ 5.509933] input: sof-soundwire HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input21 [ 5.509965] input: sof-soundwire HDMI/DP,pcm=6 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input22 [ 5.509994] input: sof-soundwire HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0/input23 [ 6.225012] Bluetooth: hci0: Waiting for firmware download to complete [ 6.225663] Bluetooth: hci0: Firmware loaded in 1920511 usecs [ 6.225755] Bluetooth: hci0: Waiting for device to boot [ 6.240780] Bluetooth: hci0: Device booted in 14713 usecs [ 6.240801] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 6.241525] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc [ 6.243793] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6.244708] Bluetooth: hci0: Firmware revision 0.4 build 15 week 45 2022 [ 7.043739] wlp0s20f3: authenticate with XXX [ 7.053459] wlp0s20f3: send auth to XXX (try 1/3) [ 7.111855] wlp0s20f3: authenticated [ 7.114735] wlp0s20f3: associate with XXX (try 1/3) [ 7.117807] wlp0s20f3: RX AssocResp from XXX (capab=0x1011 status=0 aid=3) [ 7.125813] wlp0s20f3: associated [ 7.199294] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [ 7.210240] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 28.962650] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 625.866023] BTRFS error (device nvme0n1p2): bad tree block start, mirror 1 want 400031744 have 178782208 [ 625.866130] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 400031744 (dev /dev/nvme0n1p2 sector 797696) [ 625.866144] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 400035840 (dev /dev/nvme0n1p2 sector 797704) [ 625.866156] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 400039936 (dev /dev/nvme0n1p2 sector 797712) [ 625.866166] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 400044032 (dev /dev/nvme0n1p2 sector 797720) [ 625.866485] BTRFS error (device nvme0n1p2): bad tree block start, mirror 1 want 412483584 have 191234048 [ 625.866576] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 412483584 (dev /dev/nvme0n1p2 sector 822016) [ 625.866587] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 412487680 (dev /dev/nvme0n1p2 sector 822024) [ 625.866683] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 412491776 (dev /dev/nvme0n1p2 sector 822032) [ 625.866721] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 412495872 (dev /dev/nvme0n1p2 sector 822040) [ 625.870880] BTRFS error (device nvme0n1p2): bad fsid on logical 670367744 mirror 1 [ 625.870970] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 670367744 (dev /dev/nvme0n1p2 sector 1325696) [ 625.870982] BTRFS info (device nvme0n1p2): read error corrected: ino 0 off 670371840 (dev /dev/nvme0n1p2 sector 1325704) [ 625.871548] BTRFS error (device nvme0n1p2): bad tree block start, mirror 1 want 851574784 have 93454336 [ 625.872789] BTRFS error (device nvme0n1p2): bad tree block start, mirror 1 want 903954432 have 145833984 [ 625.873441] BTRFS error (device nvme0n1p2): bad fsid on logical 921534464 mirror 1 [ 625.873886] BTRFS error (device nvme0n1p2): bad fsid on logical 893583360 mirror 1 [ 625.875656] BTRFS error (device nvme0n1p2): bad fsid on logical 40108032 mirror 1 [ 625.876087] BTRFS error (device nvme0n1p2): bad tree block start, mirror 1 want 354484224 have 133234688 [ 625.876791] BTRFS error (device nvme0n1p2): bad fsid on logical 842924032 mirror 1 [ 625.878201] BTRFS error (device nvme0n1p2): bad fsid on logical 981663744 mirror 1 [ 625.878967] BTRFS error (device nvme0n1p2): bad fsid on logical 905314304 mirror 1 [ 625.880172] BTRFS error (device nvme0n1p2): bad tree block start, mirror 1 want 458899456 have 237649920 [ 625.881164] BTRFS error (device nvme0n1p2): bad tree block start, mirror 1 want 63401066496 have 4511826990469968637 [ 625.881248] BTRFS error (device nvme0n1p2): bad tree block start, mirror 2 want 63401066496 have 4510657092918190847 [ 625.881370] BTRFS error (device nvme0n1p2): bad tree block start, mirror 1 want 63407833088 have 4511431015960431982 [ 625.881453] BTRFS error (device nvme0n1p2): bad tree block start, mirror 2 want 63407833088 have 4510199541462233816 [ 625.884501] BTRFS error (device nvme0n1p2): bad fsid on logical 98172928 mirror 1 [ 628.990709] usb 2-4: USB disconnect, device number 2 [ 629.130734] usb 3-4: USB disconnect, device number 2 [ 629.140769] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 629.320626] sd 1:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 851.070604] usb 3-4: new high-speed USB device number 6 using xhci_hcd [ 851.485880] usb 3-4: New USB device found, idVendor=0781, idProduct=55ae, bcdDevice=30.01 [ 851.485883] usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 851.485884] usb 3-4: Product: Extreme 55AE [ 851.485885] usb 3-4: Manufacturer: SanDisk [ 851.485886] usb 3-4: SerialNumber: ... [ 851.500533] scsi host0: uas [ 852.569503] scsi 0:0:0:0: Direct-Access SanDisk Extreme 55AE 3001 PQ: 0 ANSI: 6 [ 852.572997] scsi 0:0:0:1: Enclosure SanDisk SES Device 3001 PQ: 0 ANSI: 6 [ 852.575817] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 852.575852] ses 0:0:0:1: Attached Enclosure device [ 852.575880] ses 0:0:0:1: Attached scsi generic sg1 type 13 [ 852.576016] ses 0:0:0:1: Failed to get diagnostic page 0x1 [ 852.576017] ses 0:0:0:1: Failed to bind enclosure -19 [ 852.576202] sd 0:0:0:0: [sda] 1953459617 512-byte logical blocks: (1.00 TB/931 GiB) [ 852.576460] sd 0:0:0:0: [sda] Write Protect is off [ 852.576465] sd 0:0:0:0: [sda] Mode Sense: 37 00 10 00 [ 852.576955] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 852.577139] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 852.577140] sd 0:0:0:0: [sda] Optimal transfer size 1048576 bytes [ 852.604461] sda: sda1 [ 852.604541] sd 0:0:0:0: [sda] Attached SCSI disk [ 865.424936] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 874.225053] usb 3-4: USB disconnect, device number 6 [ 874.225309] device offline error, dev sda, sector 1736444160 op 0x1:(WRITE) flags 0x3000 phys_seg 3 prio class 2 [ 874.225311] Buffer I/O error on dev sda1, logical block 217055264, lost async page write [ 874.225314] Buffer I/O error on dev sda1, logical block 217055265, lost async page write [ 874.225315] Buffer I/O error on dev sda1, logical block 217055266, lost async page write [ 874.225316] device offline error, dev sda, sector 1551894784 op 0x1:(WRITE) flags 0x3000 phys_seg 2 prio class 2 [ 874.225317] Buffer I/O error on dev sda1, logical block 193986592, lost async page write [ 874.225318] Buffer I/O error on dev sda1, logical block 193986593, lost async page write [ 874.225319] device offline error, dev sda, sector 1279265024 op 0x1:(WRITE) flags 0x3000 phys_seg 2 prio class 2 [ 874.225319] Buffer I/O error on dev sda1, logical block 159907872, lost async page write [ 874.225320] Buffer I/O error on dev sda1, logical block 159907873, lost async page write [ 874.225321] device offline error, dev sda, sector 1233127680 op 0x1:(WRITE) flags 0x3000 phys_seg 1 prio class 2 [ 874.225322] Buffer I/O error on dev sda1, logical block 154140704, lost async page write [ 874.225322] device offline error, dev sda, sector 851446016 op 0x1:(WRITE) flags 0x3000 phys_seg 2 prio class 2 [ 874.225323] Buffer I/O error on dev sda1, logical block 106430496, lost async page write [ 874.225324] Buffer I/O error on dev sda1, logical block 106430497, lost async page write [ 874.225325] device offline error, dev sda, sector 486541568 op 0x1:(WRITE) flags 0x3000 phys_seg 3 prio class 2 [ 874.225326] device offline error, dev sda, sector 272632064 op 0x1:(WRITE) flags 0x3000 phys_seg 3 prio class 2 [ 874.225328] device offline error, dev sda, sector 234883328 op 0x1:(WRITE) flags 0x3000 phys_seg 2 prio class 2 [ 874.225329] device offline error, dev sda, sector 2048 op 0x1:(WRITE) flags 0x3000 phys_seg 1 prio class 2 [ 874.225335] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [ 874.233433] EXT4-fs (sda1): unmounting filesystem. [ 874.233457] Aborting journal on device sda1-8. [ 874.233461] JBD2: I/O error when updating journal superblock for sda1-8. [ 874.233467] EXT4-fs error (device sda1): ext4_put_super:1223: comm umount: Couldn't clean up the journal [ 874.233470] EXT4-fs (sda1): Remounting filesystem read-only [ 874.284645] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 874.468611] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 882.212661] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd [ 882.227191] usb 2-3: New USB device found, idVendor=0dd8, idProduct=0562, bcdDevice= 2.06 [ 882.227193] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 882.227193] usb 2-3: Product: Netac MobileDataStar [ 882.227194] usb 2-3: Manufacturer: Netac MobileDataStar [ 882.227195] usb 2-3: SerialNumber: ... [ 882.228473] scsi host0: uas [ 882.228878] scsi 0:0:0:0: Direct-Access Netac MobileDataStar 0206 PQ: 0 ANSI: 6 [ 882.230263] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 884.916957] sd 0:0:0:0: [sda] 244190646 4096-byte logical blocks: (1.00 TB/932 GiB) [ 884.917032] sd 0:0:0:0: [sda] Write Protect is off [ 884.917033] sd 0:0:0:0: [sda] Mode Sense: 5f 00 00 08 [ 884.917192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 884.917359] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 884.917363] sd 0:0:0:0: [sda] Optimal transfer size 33550336 bytes [ 884.939217] sda: sda1 [ 884.939252] sd 0:0:0:0: [sda] Attached SCSI disk [ 887.209682] EXT4-fs (sda1): recovery complete [ 887.209842] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 916.028609] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 930.820616] usb 2-3: USB disconnect, device number 3 [ 930.820801] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [ 930.828170] EXT4-fs (sda1): unmounting filesystem. [ 930.828203] buffer_io_error: 10 callbacks suppressed [ 930.828204] Buffer I/O error on dev sda1, logical block 121667584, lost sync page write [ 930.828206] JBD2: I/O error when updating journal superblock for sda1-8. [ 930.828207] Aborting journal on device sda1-8. [ 930.828208] Buffer I/O error on dev sda1, logical block 121667584, lost sync page write [ 930.828208] JBD2: I/O error when updating journal superblock for sda1-8. [ 930.828214] EXT4-fs error (device sda1): ext4_put_super:1223: comm umount: Couldn't clean up the journal [ 930.828217] EXT4-fs (sda1): Remounting filesystem read-only [ 930.848904] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 931.028609] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 941.888911] wlp0s20f3: disconnect from AP XXX for new auth to XXX [ 941.926068] wlp0s20f3: authenticate with XXX [ 941.932007] wlp0s20f3: send auth to XXX (try 1/3) [ 941.960492] wlp0s20f3: authenticated [ 941.964602] wlp0s20f3: associate with XXX (try 1/3) [ 941.967189] wlp0s20f3: RX ReassocResp from XXX (capab=0x1011 status=0 aid=1) [ 941.973936] wlp0s20f3: associated [ 942.022870] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 943.444661] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 4 using xhci_hcd [ 943.459115] usb 2-3: New USB device found, idVendor=152d, idProduct=0562, bcdDevice= 2.06 [ 943.459116] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 943.459117] usb 2-3: Product: SSK Storage [ 943.459118] usb 2-3: Manufacturer: SSK [ 943.459119] usb 2-3: SerialNumber: ... [ 943.460413] scsi host0: uas [ 943.460805] scsi 0:0:0:0: Direct-Access SSK 0206 PQ: 0 ANSI: 6 [ 943.462148] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 946.173726] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 946.173729] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 946.173800] sd 0:0:0:0: [sda] Write Protect is off [ 946.173801] sd 0:0:0:0: [sda] Mode Sense: 5f 00 00 08 [ 946.173960] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 946.174120] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 946.174121] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ 946.196883] sda: sda1 [ 946.196950] sd 0:0:0:0: [sda] Attached SCSI disk [ 946.271507] BTRFS: device label ... devid 1 transid 23 /dev/sda1 scanned by (udev-worker) (4312) [ 949.212795] BTRFS info (device sda1): using crc32c (crc32c-intel) checksum algorithm [ 949.212805] BTRFS info (device sda1): using free space tree [ 949.215862] BTRFS info (device sda1): enabling ssd optimizations [ 959.272614] usb 2-3: USB disconnect, device number 4 [ 959.279537] BTRFS error (device sda1): bdev /dev/sda1 errs: wr 0, rd 1, flush 0, corrupt 0, gen 0 [ 959.279547] BTRFS error (device sda1): bdev /dev/sda1 errs: wr 0, rd 2, flush 0, corrupt 0, gen 0 [ 959.279553] BTRFS: error (device sda1: state A) in __btrfs_free_extent:3070: errno=-5 IO failure [ 959.279555] BTRFS info (device sda1: state EA): forced readonly [ 959.279557] BTRFS error (device sda1: state EA): failed to run delayed ref for logical 35078144 num_bytes 16384 type 176 action 2 ref_mod 1: -5 [ 959.279559] BTRFS: error (device sda1: state EA) in btrfs_run_delayed_refs:2144: errno=-5 IO failure [ 959.279560] BTRFS warning (device sda1: state EA): Skipping commit of aborted transaction. [ 959.279561] BTRFS: error (device sda1: state EA) in cleanup_transaction:1958: errno=-5 IO failure [ 959.322647] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 959.502606] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 961.932889] wlp0s20f3: disconnect from AP XXX for new auth to XXX [ 961.971956] wlp0s20f3: authenticate with XXX [ 961.978066] wlp0s20f3: send auth to XXX (try 1/3) [ 962.006904] wlp0s20f3: authenticated [ 962.010616] wlp0s20f3: associate with XXX (try 1/3) [ 962.013294] wlp0s20f3: RX ReassocResp from XXX (capab=0x1011 status=0 aid=3) [ 962.022465] wlp0s20f3: associated [ 962.110897] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 976.652901] wlp0s20f3: disconnect from AP XXX for new auth to XXX [ 976.684259] wlp0s20f3: authenticate with XXX [ 976.690506] wlp0s20f3: send auth to XXX (try 1/3) [ 976.718972] wlp0s20f3: authenticated [ 976.720606] wlp0s20f3: associate with XXX (try 1/3) [ 976.726317] wlp0s20f3: RX ReassocResp from XXX (capab=0x1011 status=0 aid=1) [ 976.737338] wlp0s20f3: associated [ 976.737369] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 979.150602] usb 3-4: new high-speed USB device number 7 using xhci_hcd [ 979.565807] usb 3-4: New USB device found, idVendor=04e8, idProduct=4001, bcdDevice= 1.00 [ 979.565809] usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 979.565810] usb 3-4: Product: PSSD T7 Touch [ 979.565811] usb 3-4: Manufacturer: Samsung [ 979.565811] usb 3-4: SerialNumber: ... [ 979.580330] scsi host0: uas [ 979.580861] scsi 0:0:0:0: Direct-Access Samsung PSSD T7 Touch 0 PQ: 0 ANSI: 6 [ 979.583411] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 979.583852] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 979.584076] sd 0:0:0:0: [sda] Write Protect is off [ 979.584077] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 979.584461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 979.584520] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 979.584521] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes [ 979.601722] sda: sda1 [ 979.601783] sd 0:0:0:0: [sda] Attached SCSI disk [ 983.048766] EXT4-fs (sda1): recovery complete [ 983.050849] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 991.893068] wlp0s20f3: disconnect from AP XXX for new auth to XXX [ 991.920038] wlp0s20f3: authenticate with XXX [ 991.926566] wlp0s20f3: send auth to XXX (try 1/3) [ 991.955453] wlp0s20f3: authenticated [ 991.956652] wlp0s20f3: associate with XXX (try 1/3) [ 991.959314] wlp0s20f3: RX ReassocResp from XXX (capab=0x1011 status=0 aid=3) [ 991.968727] wlp0s20f3: associated [ 992.012529] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 1011.952607] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1023.031755] usb 3-4: USB disconnect, device number 7 [ 1023.031930] device offline error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [ 1023.041144] EXT4-fs (sda1): unmounting filesystem. [ 1023.041183] Buffer I/O error on dev sda1, logical block 121667584, lost sync page write [ 1023.041185] JBD2: I/O error when updating journal superblock for sda1-8. [ 1023.041186] Aborting journal on device sda1-8. [ 1023.041187] Buffer I/O error on dev sda1, logical block 121667584, lost sync page write [ 1023.041188] JBD2: I/O error when updating journal superblock for sda1-8. [ 1023.041196] EXT4-fs error (device sda1): ext4_put_super:1223: comm umount: Couldn't clean up the journal [ 1023.041199] EXT4-fs (sda1): Remounting filesystem read-only [ 1023.060846] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1023.242590] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 1026.834599] usb 3-4: new high-speed USB device number 8 using xhci_hcd [ 1027.031411] usb 3-4: New USB device found, idVendor=152d, idProduct=0562, bcdDevice= 2.06 [ 1027.031413] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1027.031414] usb 3-4: Product: SSK Storage [ 1027.031415] usb 3-4: Manufacturer: SSK [ 1027.031416] usb 3-4: SerialNumber: ... [ 1027.055248] scsi host0: uas [ 1027.065958] scsi 0:0:0:0: Direct-Access SSK 0206 PQ: 0 ANSI: 6 [ 1027.068574] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1029.806583] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1029.806588] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1029.806801] sd 0:0:0:0: [sda] Write Protect is off [ 1029.806802] sd 0:0:0:0: [sda] Mode Sense: 6b 00 00 08 [ 1029.807164] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1029.807288] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1029.807289] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ 1029.836485] sda: sda1 sda2 [ 1029.836534] sd 0:0:0:0: [sda] Attached SCSI disk [ 1033.078533] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 1053.504604] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1082.601642] usb 3-4: USB disconnect, device number 8 [ 1082.601807] sd 0:0:0:0: [sda] tag#25 uas_zap_pending 0 uas-tag 1 inflight: CMD [ 1082.601809] sd 0:0:0:0: [sda] tag#25 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00 [ 1082.720606] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 1082.720699] device offline error, dev sda, sector 665249678 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720708] device offline error, dev sda, sector 665249679 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720715] device offline error, dev sda, sector 665249680 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720718] device offline error, dev sda, sector 665249681 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720720] device offline error, dev sda, sector 665249682 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720724] device offline error, dev sda, sector 665249683 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720739] device offline error, dev sda, sector 665249684 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720742] device offline error, dev sda, sector 665249685 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720745] device offline error, dev sda, sector 665249686 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720749] device offline error, dev sda, sector 665249687 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1082.720972] FAT-fs (sda2): Directory bread(block 664838030) failed [ 1082.720977] FAT-fs (sda2): Directory bread(block 664838031) failed [ 1082.720980] FAT-fs (sda2): Directory bread(block 664838032) failed [ 1082.720983] FAT-fs (sda2): Directory bread(block 664838033) failed [ 1082.720987] FAT-fs (sda2): Directory bread(block 664838034) failed [ 1082.720990] FAT-fs (sda2): Directory bread(block 664838035) failed [ 1082.720993] FAT-fs (sda2): Directory bread(block 664838036) failed [ 1082.720996] FAT-fs (sda2): Directory bread(block 664838037) failed [ 1082.720999] FAT-fs (sda2): Directory bread(block 664838038) failed [ 1082.721003] FAT-fs (sda2): Directory bread(block 664838039) failed [ 1082.721122] FAT-fs (sda2): error, corrupted directory (invalid entries) [ 1082.721123] FAT-fs (sda2): Filesystem has been set read-only [ 1082.721149] Buffer I/O error on dev sda2, logical block 319457, lost async page write [ 1082.721152] Buffer I/O error on dev sda2, logical block 81130, lost async page write [ 1082.721401] FAT-fs (sda2): error, corrupted directory (invalid entries) [ 1082.721409] Buffer I/O error on dev sda2, logical block 323719, lost async page write [ 1082.721411] Buffer I/O error on dev sda2, logical block 85392, lost async page write [ 1082.721536] Buffer I/O error on dev sda2, logical block 653572750, lost async page write [ 1082.721537] Buffer I/O error on dev sda2, logical block 653572751, lost async page write [ 1082.721538] Buffer I/O error on dev sda2, logical block 653572752, lost async page write [ 1082.721539] Buffer I/O error on dev sda2, logical block 477006, lost async page write [ 1082.721540] Buffer I/O error on dev sda2, logical block 476750, lost async page write [ 1082.721541] Buffer I/O error on dev sda2, logical block 1, lost async page write [ 1082.722180] FAT-fs (sda2): error, corrupted directory (invalid entries) [ 1082.722628] FAT-fs (sda2): error, corrupted directory (invalid entries) [ 1082.723014] FAT-fs (sda2): error, corrupted directory (invalid entries) [ 1082.723390] FAT-fs (sda2): error, corrupted directory (invalid entries) [ 1082.723724] FAT-fs (sda2): error, corrupted directory (invalid entries) [ 1082.770758] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1082.952602] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 1102.382885] wlp0s20f3: disconnect from AP XXX for new auth to XXX [ 1102.436271] wlp0s20f3: authenticate with XXX [ 1102.442224] wlp0s20f3: send auth to XXX (try 1/3) [ 1102.470412] wlp0s20f3: authenticated [ 1102.470586] wlp0s20f3: associate with XXX (try 1/3) [ 1102.473954] wlp0s20f3: RX ReassocResp from XXX (capab=0x1011 status=0 aid=1) [ 1102.483289] wlp0s20f3: associated [ 1102.484975] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 1104.868634] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 5 using xhci_hcd [ 1104.883109] usb 2-3: New USB device found, idVendor=152d, idProduct=0562, bcdDevice= 2.06 [ 1104.883110] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1104.883111] usb 2-3: Product: SSK Storage [ 1104.883112] usb 2-3: Manufacturer: SSK [ 1104.883113] usb 2-3: SerialNumber: ... [ 1104.884403] scsi host0: uas [ 1104.884756] scsi 0:0:0:0: Direct-Access SSK 0206 PQ: 0 ANSI: 6 [ 1104.886130] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1107.597816] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 1107.597820] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1107.597889] sd 0:0:0:0: [sda] Write Protect is off [ 1107.597890] sd 0:0:0:0: [sda] Mode Sense: 5f 00 00 08 [ 1107.598049] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1107.598211] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1107.598212] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ 1107.608805] sda: sda1 [ 1107.608842] sd 0:0:0:0: [sda] Attached SCSI disk [ 1109.296977] wlp0s20f3: disconnect from AP XXX for new auth to XXX [ 1109.316199] wlp0s20f3: authenticate with XXX [ 1109.321891] wlp0s20f3: send auth to XXX (try 1/3) [ 1109.350157] wlp0s20f3: authenticated [ 1109.350600] wlp0s20f3: associate with XXX (try 1/3) [ 1109.352856] wlp0s20f3: RX ReassocResp from XXX (capab=0x1011 status=0 aid=3) [ 1109.363069] wlp0s20f3: associated [ 1109.366572] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 1114.285153] BTRFS info (device sda1): using crc32c (crc32c-intel) checksum algorithm [ 1114.285161] BTRFS info (device sda1): using free space tree [ 1114.288253] BTRFS info (device sda1): enabling ssd optimizations [ 1133.090599] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1163.480629] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1521.342192] Non-volatile memory driver v1.3 [ 1523.187786] st: Version 20160209, fixed bufsize 32768, s/g segs 256