[ 0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26 [ 0.000000] Linux version 4.15.0-101-generic (XXX@XXX) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #102-Ubuntu SMP Mon May 11 10:07:26 UTC 2020 (Ubuntu 4.15.0-101.102-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-101-generic root=/dev/mapper/XXXXXXXXXXXXX ro nouveau.modeset=0 pcie_aspm=off [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cd7d9fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cd7da000-0x00000000cd7e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cd7e1000-0x00000000cdc2afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cdc2b000-0x00000000ce060fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ce061000-0x00000000dd798fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd799000-0x00000000dd9c6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd9c7000-0x00000000dd9e6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dd9e7000-0x00000000de6f9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de6fa000-0x00000000deffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO ThinkServer TS140/ThinkServer TS140, BIOS FBKT48AUS 08/26/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x31e000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E8FFF uncachable [ 0.000000] E9000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back [ 0.000000] 1 base 0200000000 mask 7F00000000 write-back [ 0.000000] 2 base 0300000000 mask 7FF0000000 write-back [ 0.000000] 3 base 0310000000 mask 7FF8000000 write-back [ 0.000000] 4 base 0318000000 mask 7FFC000000 write-back [ 0.000000] 5 base 031C000000 mask 7FFE000000 write-back [ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 12256M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcd70-0x000fcd7f] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x3cb91000, 0x3cb91fff] PGTABLE [ 0.000000] BRK [0x3cb92000, 0x3cb92fff] PGTABLE [ 0.000000] BRK [0x3cb93000, 0x3cb93fff] PGTABLE [ 0.000000] BRK [0x3cb94000, 0x3cb94fff] PGTABLE [ 0.000000] BRK [0x3cb95000, 0x3cb95fff] PGTABLE [ 0.000000] BRK [0x3cb96000, 0x3cb96fff] PGTABLE [ 0.000000] BRK [0x3cb97000, 0x3cb97fff] PGTABLE [ 0.000000] BRK [0x3cb98000, 0x3cb98fff] PGTABLE [ 0.000000] BRK [0x3cb99000, 0x3cb99fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x30ceb000-0x3466cfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000DD9CD090 0000A4 (v01 LENOVO TC-FB 00001300 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DD9E2198 00010C (v05 LENOVO TC-FB 00001300 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DD9CD1C8 014FCC (v02 LENOVO TC-FB 00001300 INTL 20091112) [ 0.000000] ACPI: FACS 0x00000000DE6F8080 000040 [ 0.000000] ACPI: APIC 0x00000000DD9E22A8 000062 (v03 LENOVO TC-FB 00001300 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DD9E2310 000044 (v01 LENOVO TC-FB 00001300 AMI 00010013) [ 0.000000] ACPI: TCPA 0x00000000DD9E2358 000032 (v02 LENOVO TC-FB 00001300 MSFT 01000013) [ 0.000000] ACPI: SSDT 0x00000000DD9E2390 000539 (v01 LENOVO TC-FB 00001300 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DD9E28D0 000AD8 (v01 LENOVO TC-FB 00001300 INTL 20051117) [ 0.000000] ACPI: MCFG 0x00000000DD9E33A8 00003C (v01 LENOVO TC-FB 00001300 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DD9E33E8 000038 (v01 LENOVO TC-FB 00001300 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DD9E3420 00036D (v01 LENOVO TC-FB 00001300 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DD9E3790 00329E (v01 LENOVO TC-FB 00001300 INTL 20091112) [ 0.000000] ACPI: ASF! 0x00000000DD9E6A30 0000A5 (v32 LENOVO TC-FB 00001300 TFSM 000F4240) [ 0.000000] ACPI: BGRT 0x00000000DD9E6AD8 000038 (v00 LENOVO TC-FB 00001300 AMI 00010013) [ 0.000000] ACPI: EINJ 0x00000000DD9E6B10 000130 (v01 LENOVO TC-FB 00001300 00000000) [ 0.000000] ACPI: ERST 0x00000000DD9E6C40 000230 (v01 LENOVO TC-FB 00001300 00000000) [ 0.000000] ACPI: HEST 0x00000000DD9E6E70 0000A8 (v01 LENOVO TC-FB 00001300 00000000) [ 0.000000] ACPI: BERT 0x00000000DD9E6F18 000030 (v01 LENOVO TC-FB 00001300 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031dffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x31dfd3000-0x31dffdfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000031dffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cd7d9fff] [ 0.000000] node 0: [mem 0x00000000cd7e1000-0x00000000cdc2afff] [ 0.000000] node 0: [mem 0x00000000ce061000-0x00000000dd798fff] [ 0.000000] node 0: [mem 0x00000000defff000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000031dffffff] [ 0.000000] Reserved but unavailable: 100 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031dffffff] [ 0.000000] On node 0 totalpages: 3126009 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14094 pages used for memmap [ 0.000000] DMA32 zone: 901981 pages, LIFO batch:31 [ 0.000000] Normal zone: 34688 pages used for memmap [ 0.000000] Normal zone: 2220032 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcd7da000-0xcd7e0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcdc2b000-0xce060fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd799000-0xdd9c6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd9c7000-0xdd9e6fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd9e7000-0xde6f9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xde6fa000-0xdeffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u1048576 [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3077142 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-101-generic root=/dev/mapper/XXXXXXXXXXXXX ro nouveau.modeset=0 pcie_aspm=off [ 0.000000] PCIe ASPM is disabled [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 12153632K/12504036K available (12300K kernel code, 2481K rwdata, 4268K rodata, 2432K init, 2712K bss, 350404K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39364 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 3392.188 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.37 BogoMIPS (lpj=13568752) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028360] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028402] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028435] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.028589] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.028592] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.028604] CPU0: Thermal monitoring enabled (TM1) [ 0.028613] process: using mwait in idle threads [ 0.028616] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.028617] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.028619] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.028622] Spectre V2 : Mitigation: Full generic retpoline [ 0.028623] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.028625] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.028632] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.028634] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.028636] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.028655] MDS: Mitigation: Clear CPU buffers [ 0.028806] Freeing SMP alternatives memory: 36K [ 0.032049] TSC deadline timer enabled [ 0.032052] smpboot: CPU0: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.032102] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.032136] ... version: 3 [ 0.032137] ... bit width: 48 [ 0.032138] ... generic registers: 8 [ 0.032139] ... value mask: 0000ffffffffffff [ 0.032140] ... max period: 00007fffffffffff [ 0.032141] ... fixed-purpose events: 3 [ 0.032143] ... event mask: 00000007000000ff [ 0.032169] Hierarchical SRCU implementation. [ 0.032772] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.032786] smp: Bringing up secondary CPUs ... [ 0.032844] x86: Booting SMP configuration: [ 0.032846] .... node #0, CPUs: #1 [ 0.034448] smp: Brought up 1 node, 2 CPUs [ 0.034448] smpboot: Max logical packages: 1 [ 0.034448] smpboot: Total of 2 processors activated (13568.75 BogoMIPS) [ 0.034448] devtmpfs: initialized [ 0.034448] x86/mm: Memory block size: 128MB [ 0.034448] evm: security.selinux [ 0.034448] evm: security.SMACK64 [ 0.034448] evm: security.SMACK64EXEC [ 0.034448] evm: security.SMACK64TRANSMUTE [ 0.034448] evm: security.SMACK64MMAP [ 0.034448] evm: security.apparmor [ 0.034448] evm: security.ima [ 0.034448] evm: security.capability [ 0.036019] PM: Registering ACPI NVS region [mem 0xcd7da000-0xcd7e0fff] (28672 bytes) [ 0.036021] PM: Registering ACPI NVS region [mem 0xdd9e7000-0xde6f9fff] (13709312 bytes) [ 0.036176] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.036176] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.036176] pinctrl core: initialized pinctrl subsystem [ 0.036176] RTC time: 22:29:12, date: 05/27/20 [ 0.036180] NET: Registered protocol family 16 [ 0.036236] cpuidle: using governor ladder [ 0.036236] cpuidle: using governor menu [ 0.036236] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.036236] ACPI: bus type PCI registered [ 0.036236] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.036236] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.036236] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.036236] PCI: Using configuration type 1 for base access [ 0.036236] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.036781] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.036781] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.036781] ACPI: Added _OSI(Module Device) [ 0.036781] ACPI: Added _OSI(Processor Device) [ 0.036781] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.036781] ACPI: Added _OSI(Processor Aggregator Device) [ 0.036781] ACPI: Added _OSI(Linux-Dell-Video) [ 0.036781] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.036781] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.036781] ACPI: Executed 1 blocks of module-level executable AML code [ 0.046068] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.046656] ACPI: Dynamic OEM Table Load: [ 0.046662] ACPI: SSDT 0xFFFF9B63CF14D400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.047070] ACPI: Dynamic OEM Table Load: [ 0.047075] ACPI: SSDT 0xFFFF9B63CF792800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.047518] ACPI: Dynamic OEM Table Load: [ 0.047522] ACPI: SSDT 0xFFFF9B63CF14A400 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.048668] ACPI: Interpreter enabled [ 0.048691] ACPI: (supports S0 S5) [ 0.048693] ACPI: Using IOAPIC for interrupt routing [ 0.048734] HEST: Table parsing has been initialized. [ 0.048736] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.049293] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.059130] ACPI: Power Resource [FN00] (off) [ 0.059194] ACPI: Power Resource [FN01] (off) [ 0.059254] ACPI: Power Resource [FN02] (off) [ 0.059316] ACPI: Power Resource [FN03] (off) [ 0.059376] ACPI: Power Resource [FN04] (off) [ 0.060321] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.060327] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] [ 0.060470] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] [ 0.063682] PCI host bridge to bus 0000:00 [ 0.063685] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.063687] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.063689] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.063691] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.063692] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.063694] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.063696] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.063698] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.063700] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.063702] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.063704] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.063710] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.063799] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.063818] pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit] [ 0.063869] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.063930] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.063949] pci 0000:00:16.0: reg 0x10: [mem 0xf723c000-0xf723c00f 64bit] [ 0.064003] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.064060] pci 0000:00:16.2: [8086:8c3c] type 00 class 0x010185 [ 0.064076] pci 0000:00:16.2: reg 0x10: [io 0xf0f0-0xf0f7] [ 0.064083] pci 0000:00:16.2: reg 0x14: [io 0xf0e0-0xf0e3] [ 0.064090] pci 0000:00:16.2: reg 0x18: [io 0xf0d0-0xf0d7] [ 0.064097] pci 0000:00:16.2: reg 0x1c: [io 0xf0c0-0xf0c3] [ 0.064103] pci 0000:00:16.2: reg 0x20: [io 0xf0b0-0xf0bf] [ 0.064191] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.064206] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7] [ 0.064213] pci 0000:00:16.3: reg 0x14: [mem 0xf723a000-0xf723afff] [ 0.064321] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.064337] pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff] [ 0.064343] pci 0000:00:19.0: reg 0x14: [mem 0xf7239000-0xf7239fff] [ 0.064350] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f] [ 0.064399] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.064458] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.064476] pci 0000:00:1a.0: reg 0x10: [mem 0xf7238000-0xf72383ff] [ 0.064547] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.064608] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.064625] pci 0000:00:1b.0: reg 0x10: [mem 0xf7230000-0xf7233fff 64bit] [ 0.064684] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.064745] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.064806] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.064911] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.064972] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.065072] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.065134] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.065231] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.065292] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.065394] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.065413] pci 0000:00:1d.0: reg 0x10: [mem 0xf7237000-0xf72373ff] [ 0.065485] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.065548] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 [ 0.065696] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.065710] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] [ 0.065715] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] [ 0.065722] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] [ 0.065727] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] [ 0.065733] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.065739] pci 0000:00:1f.2: reg 0x24: [mem 0xf7236000-0xf72367ff] [ 0.065768] pci 0000:00:1f.2: PME# supported from D3hot [ 0.065825] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.065841] pci 0000:00:1f.3: reg 0x10: [mem 0xf7235000-0xf72350ff 64bit] [ 0.065857] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 0.065975] acpiphp: Slot [1] registered [ 0.065982] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.066068] pci 0000:02:00.0: [8086:2526] type 00 class 0x028000 [ 0.066116] pci 0000:02:00.0: reg 0x10: [mem 0xf7100000-0xf7103fff 64bit] [ 0.066265] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.066325] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.066330] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff] [ 0.066425] pci 0000:03:00.0: [1283:8893] type 01 class 0x060401 [ 0.066794] pci 0000:03:00.0: supports D1 D2 [ 0.066794] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.066848] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.067150] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode) [ 0.067297] pci 0000:05:00.0: [10de:104a] type 00 class 0x030000 [ 0.067328] pci 0000:05:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.067345] pci 0000:05:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.067363] pci 0000:05:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.067374] pci 0000:05:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.067386] pci 0000:05:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.067395] pci 0000:05:00.0: enabling Extended Tags [ 0.067530] pci 0000:05:00.1: [10de:0e08] type 00 class 0x040300 [ 0.067556] pci 0000:05:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.067628] pci 0000:05:00.1: enabling Extended Tags [ 0.067723] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.067727] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.067730] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff] [ 0.067734] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.068603] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.068653] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.068702] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.068750] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.068799] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.068847] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.068896] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.068944] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.069462] SCSI subsystem initialized [ 0.069484] libata version 3.00 loaded. [ 0.069484] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.069484] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.069484] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.069484] vgaarb: loaded [ 0.069484] ACPI: bus type USB registered [ 0.069484] usbcore: registered new interface driver usbfs [ 0.069484] usbcore: registered new interface driver hub [ 0.069484] usbcore: registered new device driver usb [ 0.069484] EDAC MC: Ver: 3.0.0 [ 0.069484] PCI: Using ACPI for IRQ routing [ 0.069484] PCI: pci_cache_line_size set to 64 bytes [ 0.069484] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.069484] e820: reserve RAM buffer [mem 0xcd7da000-0xcfffffff] [ 0.069484] e820: reserve RAM buffer [mem 0xcdc2b000-0xcfffffff] [ 0.069484] e820: reserve RAM buffer [mem 0xdd799000-0xdfffffff] [ 0.069484] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.069484] e820: reserve RAM buffer [mem 0x31e000000-0x31fffffff] [ 0.069484] NetLabel: Initializing [ 0.069484] NetLabel: domain hash size = 128 [ 0.069484] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.069484] NetLabel: unlabeled traffic allowed by default [ 0.069484] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.069484] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.073019] clocksource: Switched to clocksource hpet [ 0.079583] VFS: Disk quotas dquot_6.6.0 [ 0.079598] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.079672] AppArmor: AppArmor Filesystem Enabled [ 0.079694] pnp: PnP ACPI init [ 0.079937] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.079940] system 00:00: [io 0xffff] has been reserved [ 0.079941] system 00:00: [io 0xffff] has been reserved [ 0.079943] system 00:00: [io 0xffff] has been reserved [ 0.079945] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.079946] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.079948] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.079950] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.079951] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.079953] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.079957] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.079975] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.080029] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.080033] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.080169] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.080171] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.080173] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.080176] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.080227] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.080230] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.080395] pnp 00:05: [dma 0 disabled] [ 0.080424] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.080683] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.081078] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.081081] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.081083] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.081085] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.081087] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.081088] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.081091] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.081093] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.081095] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.081097] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.081099] system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved [ 0.081101] system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved [ 0.081104] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.081420] pnp: PnP ACPI: found 8 devices [ 0.087114] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.087181] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.087191] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.087196] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff] [ 0.087203] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.087260] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.087269] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.087272] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.087277] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff] [ 0.087281] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.087287] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.087288] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.087289] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.087289] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.087290] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.087291] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.087292] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.087292] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.087293] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.087294] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window] [ 0.087295] pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.087296] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.087296] pci_bus 0000:05: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.087297] pci_bus 0000:05: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.087389] NET: Registered protocol family 2 [ 0.087495] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.087616] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.087713] TCP: Hash tables configured (established 131072 bind 65536) [ 0.087736] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.087770] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.087817] NET: Registered protocol family 1 [ 0.136120] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.136135] PCI: CLS 64 bytes, default 64 [ 0.136161] Unpacking initramfs... [ 0.705986] Freeing initrd memory: 58888K [ 0.706037] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.706039] software IO TLB: mapped [mem 0xd9799000-0xdd799000] (64MB) [ 0.706194] Scanning for low memory corruption every 60 seconds [ 0.706614] Initialise system trusted keyrings [ 0.706621] Key type blacklist registered [ 0.706646] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.707345] zbud: loaded [ 0.707670] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.707763] fuse init (API version 7.26) [ 0.708752] Key type asymmetric registered [ 0.708754] Asymmetric key parser 'x509' registered [ 0.708774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.708794] io scheduler noop registered [ 0.708795] io scheduler deadline registered [ 0.708812] io scheduler cfq registered (default) [ 0.709270] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 0.709272] vesafb: scrolling: redraw [ 0.709274] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.709281] vesafb: framebuffer at 0xf1000000, mapped to 0x (ptrval), using 1216k, total 1216k [ 0.724810] Console: switching to colour frame buffer device 80x30 [ 0.740748] fb0: VESA VGA frame buffer device [ 0.741080] intel_idle: MWAIT substates: 0x42120 [ 0.741080] intel_idle: v0.4.1 model 0x3C [ 0.741127] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.741239] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.741879] ACPI: Power Button [PWRB] [ 0.742176] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.761895] ACPI: Power Button [PWRF] [ 0.772301] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.792909] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.803257] ACPI: Thermal Zone [TZ00] (28 C) [ 0.813721] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.824196] ACPI: Thermal Zone [TZ01] (30 C) [ 0.834614] ERST: Error Record Serialization Table (ERST) support is initialized. [ 0.855417] pstore: using zlib compression [ 0.865854] pstore: Registered erst as persistent store backend [ 0.876550] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 0.897911] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.929707] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.973105] 0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A [ 0.996226] Linux agpgart interface v0.103 [ 1.013100] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) [ 1.073274] tpm tpm0: TPM is disabled/deactivated (0x6) [ 1.086241] loop: module loaded [ 1.097941] scsi host0: ata_generic [ 1.109127] scsi host1: ata_generic [ 1.120125] ata1: PATA max UDMA/100 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 18 [ 1.131313] ata2: PATA max UDMA/100 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 18 [ 1.142180] libphy: Fixed MDIO Bus: probed [ 1.152884] tun: Universal TUN/TAP device driver, 1.6 [ 1.163587] PPP generic driver version 2.4.2 [ 1.174068] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.184769] ehci-pci: EHCI PCI platform driver [ 1.195302] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.205582] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.225718] ehci-pci 0000:00:1a.0: debug port 2 [ 1.239733] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.239741] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7238000 [ 1.264083] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.273968] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.283852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.303347] usb usb1: Product: EHCI Host Controller [ 1.313150] usb usb1: Manufacturer: Linux 4.15.0-101-generic ehci_hcd [ 1.322964] usb usb1: SerialNumber: ... [ 1.332703] hub 1-0:1.0: USB hub found [ 1.342007] hub 1-0:1.0: 3 ports detected [ 1.351246] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.360242] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.377845] ehci-pci 0000:00:1d.0: debug port 2 [ 1.390643] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.390653] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7237000 [ 1.412083] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.420875] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.429952] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.448157] usb usb2: Product: EHCI Host Controller [ 1.457615] usb usb2: Manufacturer: Linux 4.15.0-101-generic ehci_hcd [ 1.467103] usb usb2: SerialNumber: ... [ 1.476548] hub 2-0:1.0: USB hub found [ 1.485812] hub 2-0:1.0: 3 ports detected [ 1.494949] ehci-platform: EHCI generic platform driver [ 1.504033] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.513261] ohci-pci: OHCI PCI platform driver [ 1.522421] ohci-platform: OHCI generic platform driver [ 1.531440] uhci_hcd: USB Universal Host Controller Interface driver [ 1.540733] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.549995] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.569536] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.588509] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.588611] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.598444] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.617702] usb usb3: Product: xHCI Host Controller [ 1.627551] usb usb3: Manufacturer: Linux 4.15.0-101-generic xhci-hcd [ 1.637722] usb usb3: SerialNumber: ... [ 1.647883] hub 3-0:1.0: USB hub found [ 1.657828] hub 3-0:1.0: 15 ports detected [ 1.668537] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.678294] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.696027] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.698002] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.718280] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.728562] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.748754] usb usb4: Product: xHCI Host Controller [ 1.759012] usb usb4: Manufacturer: Linux 4.15.0-101-generic xhci-hcd [ 1.769467] usb usb4: SerialNumber: ... [ 1.779938] tsc: Refined TSC clocksource calibration: 3392.144 MHz [ 1.780064] hub 4-0:1.0: USB hub found [ 1.790583] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5517d4e4, max_idle_ns: 440795261668 ns [ 1.800873] hub 4-0:1.0: 6 ports detected [ 1.832974] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.836520] i8042: PNP: No PS/2 controller found. [ 1.854700] mousedev: PS/2 mouse device common for all mice [ 1.865794] rtc_cmos 00:01: RTC can wake from S4 [ 1.876429] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.886811] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.907040] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.917435] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.917457] i2c /dev entries driver [ 1.928230] hub 1-1:1.0: USB hub found [ 1.938308] device-mapper: uevent: version 1.0.3 [ 1.948712] hub 1-1:1.0: 6 ports detected [ 1.958885] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: XXX@XXX [ 1.990597] intel_pstate: Intel P-state driver initializing [ 2.001528] ledtrig-cpu: registered to indicate activity on CPUs [ 2.013003] NET: Registered protocol family 10 [ 2.026550] Segment Routing with IPv6 [ 2.036860] NET: Registered protocol family 17 [ 2.047182] Key type dns_resolver registered [ 2.057468] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 2.068172] mce: Using 7 MCE banks [ 2.078329] RAS: Correctable Errors collector initialized. [ 2.088682] microcode: sig=0x306c3, pf=0x2, revision=0x27 [ 2.099140] microcode: Microcode Update Driver: v2.2. [ 2.099150] sched_clock: Marking stable (2099135294, 0)->(2075772800, 23362494) [ 2.109482] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 2.140180] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.150771] registered taskstats version 1 [ 2.150789] hub 2-1:1.0: USB hub found [ 2.161116] Loading compiled-in X.509 certificates [ 2.181488] hub 2-1:1.0: 8 ports detected [ 2.185726] Loaded X.509 cert 'Build time autogenerated kernel key: 81757e40860ca54b8a45e323b66799c03c91a344' [ 2.212330] zswap: loaded using pool lzo/zbud [ 2.225209] Key type big_key registered [ 2.235190] Key type trusted registered [ 2.246116] Key type encrypted registered [ 2.255763] AppArmor: AppArmor sha1 policy hashing enabled [ 2.276094] ima: No TPM chip found, activating TPM-bypass! (rc=6) [ 2.286075] ima: Allocated hash algorithm: sha1 [ 2.295836] evm: HMAC attrs: 0x1 [ 2.305642] Magic number: 4:285:503 [ 2.314884] hash matches /build/linux-sgQT9w/linux-4.15.0/drivers/base/power/main.c:883 [ 2.333810] rtc_cmos 00:01: setting system clock to 2020-05-27 22:29:15 UTC (1590618555) [ 2.353480] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.363648] EDD information not available. [ 2.374988] Freeing unused kernel image memory: 2432K [ 2.400075] Write protecting the kernel read-only data: 20480k [ 2.410495] Freeing unused kernel image memory: 2008K [ 2.420719] Freeing unused kernel image memory: 1876K [ 2.435870] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.445773] x86/mm: Checking user space page tables [ 2.460540] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.576738] pps_core: LinuxPPS API ver. 1 registered [ 2.586405] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 2.606784] PTP clock support registered [ 2.617507] ahci 0000:00:1f.2: version 3.0 [ 2.617665] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x1b impl SATA mode [ 2.637053] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 2.681326] e1000e: loading out-of-tree module taints kernel. [ 2.691870] e1000e: module verification failed: signature and/or required key missing - tainting kernel [ 2.713381] e1000e: Intel(R) PRO/1000 Network Driver - 3.8.4-NAPI [ 2.713773] scsi host2: ahci [ 2.724141] e1000e: Copyright(c) 1999 - 2020 Intel Corporation. [ 2.746205] scsi host3: ahci [ 2.757125] scsi host4: ahci [ 2.767590] scsi host5: ahci [ 2.777639] scsi host6: ahci [ 2.787238] ata3: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236100 irq 25 [ 2.806672] ata4: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236180 irq 25 [ 2.826699] ata5: DUMMY [ 2.836509] ata6: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236280 irq 25 [ 2.857025] ata7: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236300 irq 25 [ 2.878129] clocksource: Switched to clocksource tsc [ 2.878382] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.202860] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.213816] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.224355] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.234691] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.245446] ata6.00: ATA-8: ST3250310NS, MA08, max UDMA/133 [ 3.255321] ata6.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.265177] ata7.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 3.265178] ata7.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.284466] ata7.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.304115] ata4.00: ATA-8: WDC WD2502ABYS-18B7A0, 02.03B04, max UDMA/133 [ 3.314152] ata4.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.324248] ata3.00: ATA-8: KINGSTON SV300S37A240G, 527ABBF0, max UDMA/133 [ 3.334376] ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.344576] ata7.00: ATAPI: HL-DT-ST DVDROM DH50N, 1.02, max UDMA/133 [ 3.355311] ata4.00: configured for UDMA/133 [ 3.366013] ata6.00: configured for UDMA/133 [ 3.378561] ata3.00: configured for UDMA/133 [ 3.389137] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 3.395883] ata7.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 3.409784] ata7.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.409905] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.430333] ata7.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.430372] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 3.441305] scsi 3:0:0:0: Direct-Access ATA WDC WD2502ABYS-1 3B04 PQ: 0 ANSI: 5 [ 3.461855] ata7.00: configured for UDMA/133 [ 3.514543] sd 2:0:0:0: [sda] Write Protect is off [ 3.525188] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.525196] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.547449] sd 3:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/233 GiB) [ 3.570148] sda: sda1 [ 3.581227] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 3.592416] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.603212] sd 3:0:0:0: [sdb] Write Protect is off [ 3.613693] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.613708] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.634920] scsi 5:0:0:0: Direct-Access ATA ST3250310NS MA08 PQ: 0 ANSI: 5 [ 3.655808] sd 5:0:0:0: [sdc] 488281250 512-byte logical blocks: (250 GB/233 GiB) [ 3.676833] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 3.687874] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.699023] sd 5:0:0:0: [sdc] Write Protect is off [ 3.709866] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.709880] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.731268] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDROM DH50N 1.02 PQ: 0 ANSI: 5 [ 3.771928] sd 5:0:0:0: [sdc] Attached SCSI disk [ 3.788171] e1000e: probe of 0000:00:19.0 failed with error -2 [ 3.844666] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/24x cd/rw xa/form2 cdda tray [ 3.865551] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.876128] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 3.876168] sr 6:0:0:0: Attached scsi generic sg3 type 5 [ 3.915227] random: lvm: uninitialized urandom read (4 bytes read) [ 3.979179] random: lvm: uninitialized urandom read (2 bytes read) [ 4.462880] usb 3-1: New USB device found, idVendor=046d, idProduct=082d [ 4.473432] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 4.483817] usb 3-1: Product: HD Pro Webcam C920 [ 4.493928] usb 3-1: SerialNumber: ... [ 4.632085] usb 3-2: new low-speed USB device number 3 using xhci_hcd [ 4.794012] usb 3-2: New USB device found, idVendor=413c, idProduct=2003 [ 4.804295] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.814674] usb 3-2: Product: Dell USB Keyboard [ 4.825064] usb 3-2: Manufacturer: Dell [ 4.964071] usb 3-4: new full-speed USB device number 4 using xhci_hcd [ 5.122553] usb 3-4: New USB device found, idVendor=046d, idProduct=c52b [ 5.132848] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.143056] usb 3-4: Product: USB Receiver [ 5.152967] usb 3-4: Manufacturer: Logitech [ 5.166355] hidraw: raw HID events driver (C) Jiri Kosina [ 5.183971] usbcore: registered new interface driver usbhid [ 5.193627] usbhid: USB HID core driver [ 5.204870] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:413C:2003.0001/input/input2 [ 5.284232] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.0-2/input0 [ 5.305584] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2 [ 5.444990] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:1025.0005/input/input3 [ 5.477233] hid-generic 0003:046D:1025.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-4:1 [ 5.500878] input: Logitech Unifying Device. Wireless PID:200a as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:200A.0006/input/input4 [ 5.556146] hid-generic 0003:046D:200A.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:14.0-4:2 [ 5.630945] input: Logitech M510 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:1025.0005/input/input5 [ 5.656294] logitech-hidpp-device 0003:046D:1025.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:14.0-4:1 [ 5.689009] input: Logitech K350 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/0003:046D:C52B.0004/0003:046D:200A.0006/input/input6 [ 5.715880] logitech-hidpp-device 0003:046D:200A.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:14.0-4:2 [ 6.959955] random: fast init done [ 7.109586] random: lvm: uninitialized urandom read (4 bytes read) [ 7.139724] random: lvm: uninitialized urandom read (16 bytes read) [ 7.153991] random: lvm: uninitialized urandom read (16 bytes read) [ 7.256022] raid6: sse2x1 gen() 11748 MB/s [ 7.328018] raid6: sse2x1 xor() 8164 MB/s [ 7.388016] raid6: sse2x2 gen() 13948 MB/s [ 7.448016] raid6: sse2x2 xor() 8955 MB/s [ 7.508016] raid6: sse2x4 gen() 16479 MB/s [ 7.568017] raid6: sse2x4 xor() 10360 MB/s [ 7.624015] raid6: avx2x1 gen() 22620 MB/s [ 7.680017] raid6: avx2x1 xor() 15498 MB/s [ 7.736016] raid6: avx2x2 gen() 26457 MB/s [ 7.792015] raid6: avx2x2 xor() 16342 MB/s [ 7.848015] raid6: avx2x4 gen() 30327 MB/s [ 7.904014] raid6: avx2x4 xor() 19441 MB/s [ 7.913176] raid6: using algorithm avx2x4 gen() 30327 MB/s [ 7.922200] raid6: .... xor() 19441 MB/s, rmw enabled [ 7.930963] raid6: using avx2x2 recovery algorithm [ 7.941615] xor: automatically using best checksumming function avx [ 7.961325] Btrfs loaded, crc32c=crc32c-intel [ 8.267145] BTRFS: device fsid HASH_BB2-0C92-5429-AE4D-50DF412CBB6C devid 2 transid 287 /dev/sdc [ 8.283804] BTRFS: device fsid HASH_BB2-0C92-5429-AE4D-50DF412CBB6C devid 1 transid 287 /dev/sdb [ 8.375822] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 8.541837] ip_tables: (C) 0DB3-0E5D Netfilter Core Team [ 8.558912] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.616161] systemd[1]: Detected architecture x86-64. [ 8.662930] systemd[1]: Set hostname to ... [ 8.765281] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.798599] systemd[1]: Created slice System Slice. [ 8.820386] systemd[1]: Listening on LVM2 metadata daemon socket. [ 8.841980] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 8.864473] systemd[1]: Listening on Journal Socket. [ 8.886818] systemd[1]: Starting Uncomplicated firewall... [ 8.908891] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 9.103004] lp: driver loaded but no devices found [ 9.105480] ppdev: user-space parallel port driver [ 9.235390] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 9.376687] random: crng init done [ 9.385530] random: 5 urandom warning(s) missed due to ratelimiting [ 9.602860] systemd-journald[392]: Received request to flush runtime journal from PID 1 [ 9.905175] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.983201] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 9.983205] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247) [ 9.983208] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.983210] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 9.983212] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 9.983214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.983214] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20170831/utaddress-247) [ 9.983216] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20170831/utaddress-247) [ 9.983218] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 9.983220] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 9.983221] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 9.983223] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 9.983225] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.983225] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20170831/utaddress-247) [ 9.983227] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20170831/utaddress-247) [ 9.983228] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C1F (\GPBL) (20170831/utaddress-247) [ 9.983230] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C1F (\GPBL) (20170831/utaddress-247) [ 9.983232] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 9.983233] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170831/utaddress-247) [ 9.983235] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 9.983236] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170831/utaddress-247) [ 9.983238] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.983238] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 10.009167] ipmi message handler version 39.2 [ 10.016510] ipmi device interface [ 10.016680] snd_hda_intel 0000:05:00.1: Disabling MSI [ 10.016685] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client [ 10.017708] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.039528] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 10.039530] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.039531] snd_hda_codec_realtek hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.039531] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 10.039532] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 10.039533] snd_hda_codec_realtek hdaudioC0D2: Mic=0x18 [ 10.039533] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 10.049328] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.050025] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 10.050054] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 10.050080] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 10.075336] Intel(R) Wireless WiFi driver for Linux [ 10.075337] Copyright(c) 2003- 2015 Intel Corporation [ 10.097704] media: Linux media interface: v0.10 [ 10.104378] iwlwifi 0000:02:00.0: loaded firmware version 34.3125811985.0 op_mode iwlmvm [ 10.129063] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 9260, REV=0x324 [ 10.131210] Linux video capture interface: v2.00 [ 10.181296] iwlwifi 0000:02:00.0: base HW address: XX:XX:XX:XX:XX:XX [ 10.186205] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 10.186206] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 10.186207] RAPL PMU: hw unit of domain package 2^-14 Joules [ 10.186207] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 10.186208] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 10.249342] AVX2 version of gcm_enc/dec engaged. [ 10.249343] AES CTR mode by8 optimization enabled [ 10.269159] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 10.269335] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 10.269345] thermal thermal_zone2: failed to read out thermal zone (-61) [ 10.293620] nvidia: module license 'NVIDIA' taints kernel. [ 10.293621] Disabling lock debugging due to kernel taint [ 10.303576] nvidia-nvlink: Nvlink Core is being initialized, major device number 238 [ 10.303921] usbcore: registered new interface driver snd-usb-audio [ 10.304077] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 10.304267] nvidia 0000:05:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 10.304353] uvcvideo 3-1:1.0: Entity type for entity Processing 3 was not initialized! [ 10.304354] uvcvideo 3-1:1.0: Entity type for entity Extension 6 was not initialized! [ 10.304354] uvcvideo 3-1:1.0: Entity type for entity Extension 12 was not initialized! [ 10.304355] uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized! [ 10.304356] uvcvideo 3-1:1.0: Entity type for entity Extension 8 was not initialized! [ 10.304357] uvcvideo 3-1:1.0: Entity type for entity Extension 9 was not initialized! [ 10.304357] uvcvideo 3-1:1.0: Entity type for entity Extension 10 was not initialized! [ 10.304358] uvcvideo 3-1:1.0: Entity type for entity Extension 11 was not initialized! [ 10.304400] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input10 [ 10.304437] usbcore: registered new interface driver uvcvideo [ 10.304437] USB Video Class driver (1.1.1) [ 10.304579] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.132 Fri Nov 1 00:40:14 PDT 2019 (using threaded interrupts) [ 10.326275] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.132 Fri Nov 1 04:06:17 PDT 2019 [ 10.327031] [drm] [nvidia-drm] [GPU ID 0x00000500] Loading driver [ 10.327032] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:05:00.0 on minor 0 [ 10.405615] intel_rapl: Found RAPL domain package [ 10.405616] intel_rapl: Found RAPL domain core [ 10.405617] intel_rapl: Found RAPL domain dram [ 10.405619] intel_rapl: RAPL package 0 domain package locked by BIOS [ 10.405621] intel_rapl: RAPL package 0 domain dram locked by BIOS [ 10.570517] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card1/input11 [ 10.570549] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.4/0000:05:00.1/sound/card1/input12 [ 10.743903] Adding 12505084k swap on /dev/mapper/XXXXXXXXXXXXXXXX Priority:-2 extents:1 across:12505084k SSFS [ 10.779752] BTRFS info (device sdb): disk space caching is enabled [ 10.779753] BTRFS info (device sdb): has skinny extents [ 10.780615] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 10.854610] BTRFS info (device sdb): bdev /dev/sdc errs: wr 0, rd 16, flush 0, corrupt 0, gen 0 [ 10.857686] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 237 [ 10.912778] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window] [ 10.912880] caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia] mapping multiple BARs [ 11.385607] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 11.385714] caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia] mapping multiple BARs [ 13.591450] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 13.787059] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 13.878640] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 14.446668] aufs 4.15-20180219 [ 14.685460] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 14.685577] caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia] mapping multiple BARs [ 25.544213] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 25.692331] usb 3-1: device firmware changed [ 25.692617] usb 3-1: USB disconnect, device number 2 [ 25.695298] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695319] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695332] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695424] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695505] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695774] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695791] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695803] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695873] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.695948] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.698314] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.698371] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.698418] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.698525] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.698630] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699082] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699134] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699181] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699276] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699381] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699696] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699735] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699747] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699809] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.699882] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.702335] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.702354] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.702367] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.702442] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.702519] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.702876] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.702923] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.702967] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.703055] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.703155] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.703541] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.703591] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.703637] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.703731] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.703860] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709511] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709532] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709544] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709619] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709694] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709821] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709835] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709847] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709907] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.709978] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710150] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710196] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710239] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710326] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710427] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710678] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710727] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710772] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.710884] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711034] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711222] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711237] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711249] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711311] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711383] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711511] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711525] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711537] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711597] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711668] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711846] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711892] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.711935] usb 3-1: 3:3: usb_set_interface failed (-19) [ 25.833134] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 25.840145] usb 3-1: new high-speed USB device number 5 using xhci_hcd [ 26.162868] logitech-hidpp-device 0003:046D:1025.0005: HID++ 1.0 device connected. [ 26.213078] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 26.218538] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 26.261280] wlp2s0: authenticated [ 26.264094] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 26.269218] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=8) [ 26.271417] wlp2s0: associated [ 26.315733] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 26.499392] snd_hda_intel 0000:05:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 28.206662] usb 3-1: New USB device found, idVendor=046d, idProduct=082d [ 28.206664] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 28.206664] usb 3-1: Product: HD Pro Webcam C920 [ 28.206665] usb 3-1: SerialNumber: ... [ 28.207030] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 28.207683] uvcvideo 3-1:1.0: Entity type for entity Processing 3 was not initialized! [ 28.207684] uvcvideo 3-1:1.0: Entity type for entity Extension 6 was not initialized! [ 28.207685] uvcvideo 3-1:1.0: Entity type for entity Extension 12 was not initialized! [ 28.207685] uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized! [ 28.207686] uvcvideo 3-1:1.0: Entity type for entity Extension 8 was not initialized! [ 28.207687] uvcvideo 3-1:1.0: Entity type for entity Extension 9 was not initialized! [ 28.207687] uvcvideo 3-1:1.0: Entity type for entity Extension 10 was not initialized! [ 28.207688] uvcvideo 3-1:1.0: Entity type for entity Extension 11 was not initialized! [ 28.207731] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input13 [ 30.922541] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 41.677014] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 41.685692] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 41.723943] wlp2s0: authenticated [ 41.725515] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 41.726799] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [ 41.729294] wlp2s0: associated [ 186.943944] systemd: 26 output lines suppressed due to ratelimiting [ 186.947648] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 186.968918] systemd[1]: Detected architecture x86-64. [ 187.384296] systemd[1]: Stopping Journal Service... [ 187.389532] systemd-journald[392]: Received SIGTERM from PID 1 (systemd). [ 187.424860] systemd[1]: Stopped Journal Service. [ 187.425948] systemd[1]: Starting Journal Service... [ 187.455927] systemd[1]: Started Journal Service. [ 308.061124] TCP: wlp2s0: Driver has suspect GRO implementation, TCP performance may be compromised. [ 513.297472] iwlwifi 0000:02:00.0: Unhandled alg: 0x707 [ 513.604823] iwlwifi 0000:02:00.0: Unhandled alg: 0x707 [ 513.911958] iwlwifi 0000:02:00.0: Unhandled alg: 0x707 [ 513.911983] iwlwifi 0000:02:00.0: Unhandled alg: 0x707 [ 514.528932] wlp2s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) [ 516.674603] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 516.681407] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 516.682341] wlp2s0: authenticated [ 516.684978] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 516.685763] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [ 516.687415] wlp2s0: associated [ 2406.014305] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 2407.752175] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window] [ 2407.752278] caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia] mapping multiple BARs [ 2413.615147] usb 3-1: reset high-speed USB device number 5 using xhci_hcd [ 2413.763232] usb 3-1: device firmware changed [ 2413.763261] usb 3-1: USB disconnect, device number 5 [ 2413.766845] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.766864] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.766879] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.766980] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767066] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767330] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767345] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767359] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767431] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767508] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767782] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767824] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767871] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.767968] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.768070] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.768407] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.768463] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.768523] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.768630] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.768748] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769043] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769059] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769073] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769143] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769218] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769476] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769491] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769505] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769573] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769648] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.769960] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.770002] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.770048] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.770143] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.770244] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.770614] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.770670] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.770730] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.770837] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.771094] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.773950] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.773970] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.773985] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774066] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774145] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774306] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774319] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774333] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774403] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774478] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774690] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774732] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774778] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.774876] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775082] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775378] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775432] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775492] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775601] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775714] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775868] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775883] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775897] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.775965] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776038] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776171] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776184] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776197] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776265] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776337] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776520] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776561] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776606] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776699] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.776799] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.777040] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.777093] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.777152] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.777256] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.777367] usb 3-1: 3:3: usb_set_interface failed (-19) [ 2413.922908] usb 3-1: new high-speed USB device number 6 using xhci_hcd [ 2416.305360] usb 3-1: New USB device found, idVendor=046d, idProduct=082d [ 2416.305362] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 2416.305362] usb 3-1: Product: HD Pro Webcam C920 [ 2416.305363] usb 3-1: SerialNumber: ... [ 2416.306333] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 2416.306658] uvcvideo 3-1:1.0: Entity type for entity Processing 3 was not initialized! [ 2416.306672] uvcvideo 3-1:1.0: Entity type for entity Extension 6 was not initialized! [ 2416.306672] uvcvideo 3-1:1.0: Entity type for entity Extension 12 was not initialized! [ 2416.306673] uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized! [ 2416.306674] uvcvideo 3-1:1.0: Entity type for entity Extension 8 was not initialized! [ 2416.306674] uvcvideo 3-1:1.0: Entity type for entity Extension 9 was not initialized! [ 2416.306675] uvcvideo 3-1:1.0: Entity type for entity Extension 10 was not initialized! [ 2416.306676] uvcvideo 3-1:1.0: Entity type for entity Extension 11 was not initialized! [ 2416.308362] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input14 [ 2425.728320] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 2425.730487] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 2425.731293] wlp2s0: authenticated [ 2425.733751] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 2425.734550] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [ 2425.736820] wlp2s0: associated [ 2613.360151] usb 3-1: reset high-speed USB device number 6 using xhci_hcd