Probe #4ce8997d5a of ASUSTek M5A78L-M Desktop Computer
Log: dmesg
[ 0.000000] Linux version 6.1.0-1parrot1-amd64 (XXX@XXX) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Parrot) XXX.XXX.XXX.XXX) #1 SMP PREEMPT_DYNAMIC Parrot 6.1.15-1parrot1 (2023-04-25)
[ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-1parrot1-amd64 root=UUID=HASH_1D9-E1E3-3637-52E7-53026CC98935 ro rootflags=subvol=@ quiet splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cfe80000-0x00000000cfe97fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfe98000-0x00000000cfebffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cfec0000-0x00000000cfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2101 12/02/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3515.774 MHz processor
[ 0.005985] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005988] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.014429] AGP: No AGP bridge found
[ 0.014506] last_pfn = 0x42f000 max_arch_pfn = 0x400000000
[ 0.015306] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.015479] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.015487] last_pfn = 0xcfe80 max_arch_pfn = 0x400000000
[ 0.020003] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[ 0.020022] Using GB pages for direct mapping
[ 0.020437] RAMDISK: [mem 0x2b9dd000-0x31ce5fff]
[ 0.020444] ACPI: Early table checksum verification disabled
[ 0.020448] ACPI: RSDP 0x00000000000FB490 000024 (v02 ACPIAM)
[ 0.020452] ACPI: XSDT 0x00000000CFE80100 000054 (v01 120214 XSDT0955 20141202 MSFT 00000097)
[ 0.020457] ACPI: FACP 0x00000000CFE80290 0000F4 (v03 120214 FACP0955 20141202 MSFT 00000097)
[ 0.020462] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20220331/tbfadt-615)
[ 0.020465] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20220331/tbfadt-564)
[ 0.020469] ACPI: DSDT 0x00000000CFE80460 00DBCE (v01 A1887 A1887001 00000001 INTL 20060113)
[ 0.020473] ACPI: FACS 0x00000000CFE98000 000040
[ 0.020475] ACPI: FACS 0x00000000CFE98000 000040
[ 0.020478] ACPI: APIC 0x00000000CFE80390 00008C (v01 120214 APIC0955 20141202 MSFT 00000097)
[ 0.020481] ACPI: MCFG 0x00000000CFE80420 00003C (v01 120214 OEMMCFG 20141202 MSFT 00000097)
[ 0.020485] ACPI: OEMB 0x00000000CFE98040 000072 (v01 120214 OEMB0955 20141202 MSFT 00000097)
[ 0.020488] ACPI: HPET 0x00000000CFE8F460 000038 (v01 120214 OEMHPET 20141202 MSFT 00000097)
[ 0.020491] ACPI: SSDT 0x00000000CFE8F4A0 001158 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.020494] ACPI: Reserving FACP table memory at [mem 0xcfe80290-0xcfe80383]
[ 0.020496] ACPI: Reserving DSDT table memory at [mem 0xcfe80460-0xcfe8e02d]
[ 0.020497] ACPI: Reserving FACS table memory at [mem 0xcfe98000-0xcfe9803f]
[ 0.020498] ACPI: Reserving FACS table memory at [mem 0xcfe98000-0xcfe9803f]
[ 0.020499] ACPI: Reserving APIC table memory at [mem 0xcfe80390-0xcfe8041b]
[ 0.020500] ACPI: Reserving MCFG table memory at [mem 0xcfe80420-0xcfe8045b]
[ 0.020501] ACPI: Reserving OEMB table memory at [mem 0xcfe98040-0xcfe980b1]
[ 0.020502] ACPI: Reserving HPET table memory at [mem 0xcfe8f460-0xcfe8f497]
[ 0.020503] ACPI: Reserving SSDT table memory at [mem 0xcfe8f4a0-0xcfe905f7]
[ 0.020573] No NUMA configuration found
[ 0.020574] Faking a node at [mem 0x0000000000000000-0x000000042effffff]
[ 0.020585] NODE_DATA(0) allocated [mem 0x42efd5000-0x42effffff]
[ 0.020882] Zone ranges:
[ 0.020883] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.020885] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.020887] Normal [mem 0x0000000100000000-0x000000042effffff]
[ 0.020889] Device empty
[ 0.020890] Movable zone start for each node
[ 0.020892] Early memory node ranges
[ 0.020892] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.020894] node 0: [mem 0x0000000000100000-0x00000000cfe7ffff]
[ 0.020895] node 0: [mem 0x0000000100000000-0x000000042effffff]
[ 0.020898] Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
[ 0.020904] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.020945] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.031125] On node 0, zone Normal: 384 pages in unavailable ranges
[ 0.031200] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.031381] ACPI: PM-Timer IO Port: 0x808
[ 0.031396] IOAPIC[0]: apic_id 22, version 33, address 0xfec00000, GSI 0-23
[ 0.031399] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.031402] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.031406] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.031407] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.031412] smpboot: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.031424] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.031426] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.031427] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.031428] PM: hibernation: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.031430] PM: hibernation: Registered nosave memory: [mem 0xcfe80000-0xcfe97fff]
[ 0.031431] PM: hibernation: Registered nosave memory: [mem 0xcfe98000-0xcfebffff]
[ 0.031432] PM: hibernation: Registered nosave memory: [mem 0xcfec0000-0xcfefffff]
[ 0.031433] PM: hibernation: Registered nosave memory: [mem 0xcff00000-0xffdfffff]
[ 0.031434] PM: hibernation: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.031436] [mem 0xcff00000-0xffdfffff] available for PCI devices
[ 0.031437] Booting paravirtualized kernel on bare hardware
[ 0.031439] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.035965] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.036516] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[ 0.036523] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[ 0.036525] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.036553] Fallback order for Node 0: 0
[ 0.036556] Built 1 zonelists, mobility grouping on. Total pages: 4124102
[ 0.036558] Policy zone: Normal
[ 0.036559] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-1parrot1-amd64 root=UUID=HASH_1D9-E1E3-3637-52E7-53026CC98935 ro rootflags=subvol=@ quiet splash
[ 0.036617] Unknown kernel command line parameters "splash BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-1parrot1-amd64", will be passed to user space.
[ 0.039415] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.040775] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.040810] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.040812] AGP: Checking aperture...
[ 0.049249] AGP: No AGP bridge found
[ 0.049251] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.049253] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.049253] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.049254] AGP: This costs you 64MB of RAM
[ 0.049256] AGP: Mapping aperture over RAM [mem 0xc8000000-0xcbffffff] (65536KB)
[ 0.049259] PM: hibernation: Registered nosave memory: [mem 0xc8000000-0xcbffffff]
[ 0.049340] software IO TLB: area num 8.
[ 0.095746] Memory: 3303640K/16758904K available (14342K kernel code, 2322K rwdata, 8664K rodata, 2768K init, 5124K bss, 563832K reserved, 0K cma-reserved)
[ 0.096070] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.096089] ftrace: allocating 40063 entries in 157 pages
[ 0.104848] ftrace: allocated 157 pages with 5 groups
[ 0.105635] Dynamic Preempt: voluntary
[ 0.105684] rcu: Preemptible hierarchical RCU implementation.
[ 0.105685] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.105687] Trampoline variant of Tasks RCU enabled.
[ 0.105687] Rude variant of Tasks RCU enabled.
[ 0.105688] Tracing variant of Tasks RCU enabled.
[ 0.105688] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.105689] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.110783] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.110964] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.111018] spurious 8259A interrupt: IRQ7.
[ 0.113628] Console: colour VGA+ 80x25
[ 0.113641] printk: console [tty0] enabled
[ 0.113670] ACPI: Core revision 20220331
[ 0.113784] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.113798] APIC: Switch to symmetric I/O mode setup
[ 0.114136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.130467] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32ad85bbdce, max_idle_ns: 440795247007 ns
[ 0.130472] Calibrating delay loop (skipped), value calculated using timer frequency.. 7034.52 BogoMIPS (lpj=11719246)
[ 0.130476] pid_max: default: 32768 minimum: 301
[ 0.130548] LSM: Security Framework initializing
[ 0.130570] landlock: Up and running.
[ 0.130571] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.130604] AppArmor: AppArmor initialized
[ 0.130610] TOMOYO Linux initialized
[ 0.130618] LSM support for eBPF active
[ 0.130705] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.130751] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.131067] LVT offset 1 assigned for vector 0xf9
[ 0.131072] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.131074] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.131078] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.131080] Spectre V2 : Mitigation: Retpolines
[ 0.131081] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.131082] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.131083] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.131084] RETBleed: Mitigation: untrained return thunk
[ 0.131086] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.131088] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.137236] Freeing SMP alternatives memory: 36K
[ 0.249877] smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.250057] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.250059] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.250088] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.250108] cblist_init_generic: Setting shift to 3 and lim to 1.
[ 0.250127] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.250149] ... version: 0
[ 0.250150] ... bit width: 48
[ 0.250151] ... generic registers: 6
[ 0.250151] ... value mask: 0000ffffffffffff
[ 0.250153] ... max period: 00007fffffffffff
[ 0.250153] ... fixed-purpose events: 0
[ 0.250154] ... event mask: 000000000000003f
[ 0.250268] rcu: Hierarchical SRCU implementation.
[ 0.250269] rcu: Max phase no-delay instances is 1000.
[ 0.250470] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.250470] smp: Bringing up secondary CPUs ...
[ 0.250470] x86: Booting SMP configuration:
[ 0.250470] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.290560] smp: Brought up 1 node, 6 CPUs
[ 0.290560] smpboot: Max logical packages: 2
[ 0.290560] smpboot: Total of 6 processors activated (42206.17 BogoMIPS)
[ 0.323849] node 0 deferred pages initialised in 30ms
[ 0.324747] devtmpfs: initialized
[ 0.324747] x86/mm: Memory block size: 128MB
[ 0.327824] ACPI: PM: Registering ACPI NVS region [mem 0xcfe98000-0xcfebffff] (163840 bytes)
[ 0.327824] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.327824] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.327824] pinctrl core: initialized pinctrl subsystem
[ 0.328325] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.328811] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.329186] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.329555] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.330495] thermal_sys: Registered thermal governor 'fair_share'
[ 0.330497] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.330498] thermal_sys: Registered thermal governor 'step_wise'
[ 0.330499] thermal_sys: Registered thermal governor 'user_space'
[ 0.330500] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.330514] cpuidle: using governor ladder
[ 0.330520] cpuidle: using governor menu
[ 0.330546] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.330605] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.330609] PCI: not using MMCONFIG
[ 0.330613] PCI: Using configuration type 1 for base access
[ 0.330614] PCI: Using configuration type 1 for extended access
[ 0.330816] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.330817] mtrr: probably your BIOS does not setup all CPUs.
[ 0.330818] mtrr: corrected configuration.
[ 0.332063] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.332069] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.332069] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.332069] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.332069] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.332069] ACPI: Added _OSI(Module Device)
[ 0.332069] ACPI: Added _OSI(Processor Device)
[ 0.332069] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.332069] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.342234] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.464785] ACPI: Interpreter enabled
[ 0.464814] ACPI: PM: (supports S0 S1 S3 S4 S5)
[ 0.464816] ACPI: Using IOAPIC for interrupt routing
[ 0.464841] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.466357] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.466371] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.466373] PCI: Using E820 reservations for host bridge windows
[ 0.466846] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.473583] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.473589] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.473943] PCI host bridge to bus 0000:00
[ 0.473945] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.473947] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.473949] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.473951] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.473952] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff window]
[ 0.473954] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.473956] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.473974] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.474087] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
[ 0.474107] pci 0000:00:02.0: enabling Extended Tags
[ 0.474132] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.474217] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.474236] pci 0000:00:07.0: enabling Extended Tags
[ 0.474259] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.474342] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[ 0.474361] pci 0000:00:0a.0: enabling Extended Tags
[ 0.474385] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.474483] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.474500] pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
[ 0.474509] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
[ 0.474518] pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
[ 0.474527] pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
[ 0.474536] pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
[ 0.474545] pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.474566] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.474669] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.474686] pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.474808] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.474824] pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.474956] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.474972] pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
[ 0.475050] pci 0000:00:12.2: supports D1 D2
[ 0.475051] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.475136] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.475153] pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.475284] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.475300] pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.475430] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.475446] pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
[ 0.475524] pci 0000:00:13.2: supports D1 D2
[ 0.475525] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.475614] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.475768] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.475784] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.475793] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.475801] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.475810] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.475819] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.475838] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.475840] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.475841] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.475843] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.475935] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.475955] pci 0000:00:14.2: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.476020] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.476100] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.476250] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.476355] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.476372] pci 0000:00:14.5: reg 0x10: [mem 0xfe9fa000-0xfe9fafff]
[ 0.476504] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.476552] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.476596] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.476640] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.476687] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.476733] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.476818] pci 0000:01:00.0: [1002:6610] type 00 class 0x030000
[ 0.476830] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.476839] pci 0000:01:00.0: reg 0x18: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.476846] pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
[ 0.476856] pci 0000:01:00.0: reg 0x30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.476861] pci 0000:01:00.0: enabling Extended Tags
[ 0.476874] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.476906] pci 0000:01:00.0: supports D1 D2
[ 0.476908] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.476935] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x8 link at 0000:00:02.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.477002] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.477014] pci 0000:01:00.1: reg 0x10: [mem 0xfea9c000-0xfea9ffff 64bit]
[ 0.477041] pci 0000:01:00.1: enabling Extended Tags
[ 0.477076] pci 0000:01:00.1: supports D1 D2
[ 0.477159] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.477162] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.477165] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.477168] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.477214] pci 0000:02:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.477234] pci 0000:02:00.0: reg 0x10: [mem 0xfebf0000-0xfebf7fff 64bit]
[ 0.477330] pci 0000:02:00.0: PME# supported from D3cold
[ 0.477409] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.477414] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.477467] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.477483] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.477503] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.477516] pci 0000:03:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.477589] pci 0000:03:00.0: supports D1 D2
[ 0.477590] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.477720] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.477724] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.477728] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.477739] pci_bus 0000:04: extended config space not accessible
[ 0.477800] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.477809] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.477811] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.477812] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.477814] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.477816] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff window] (subtractive decode)
[ 0.477817] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.478674] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.478716] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[ 0.478757] ACPI: PCI: Interrupt link LNKC configured for IRQ 10
[ 0.478798] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.478838] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.478840] ACPI: PCI: Interrupt link LNKE disabled
[ 0.478880] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.478881] ACPI: PCI: Interrupt link LNKF disabled
[ 0.478920] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.478961] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.478962] ACPI: PCI: Interrupt link LNKH disabled
[ 0.479102] iommu: Default domain type: Translated
[ 0.479102] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.479102] EDAC MC: Ver: 3.0.0
[ 0.479102] NetLabel: Initializing
[ 0.479102] NetLabel: domain hash size = 128
[ 0.479102] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.479102] NetLabel: unlabeled traffic allowed by default
[ 0.479102] PCI: Using ACPI for IRQ routing
[ 0.487271] PCI: pci_cache_line_size set to 64 bytes
[ 0.487322] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.487324] e820: reserve RAM buffer [mem 0xcfe80000-0xcfffffff]
[ 0.487326] e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
[ 0.487345] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.487345] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.487345] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.487345] vgaarb: loaded
[ 0.487345] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.487345] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.489272] clocksource: Switched to clocksource tsc-early
[ 0.489433] VFS: Disk quotas dquot_6.6.0
[ 0.489448] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.489623] AppArmor: AppArmor Filesystem Enabled
[ 0.489637] pnp: PnP ACPI init
[ 0.489637] pnp 00:02: [dma 0 disabled]
[ 0.489637] pnp 00:03: [dma 0 disabled]
[ 0.489637] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.489637] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.489637] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.489637] system 00:05: [io 0x040b] has been reserved
[ 0.489637] system 00:05: [io 0x04d6] has been reserved
[ 0.489637] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.489637] system 00:05: [io 0x0c14] has been reserved
[ 0.489637] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.489637] system 00:05: [io 0x0c52] has been reserved
[ 0.489637] system 00:05: [io 0x0c6c] has been reserved
[ 0.489637] system 00:05: [io 0x0c6f] has been reserved
[ 0.489637] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 0.489637] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 0.489637] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 0.489637] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 0.489637] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.489637] system 00:05: [io 0x0b00-0x0b3f] has been reserved
[ 0.489637] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.489637] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.489637] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.489637] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.489637] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.489637] system 00:05: [io 0xfe00-0xfefe] has been reserved
[ 0.489637] system 00:05: [mem 0xcff00000-0xcfffffff] has been reserved
[ 0.489637] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.489637] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.489637] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.489637] system 00:06: [io 0x0230-0x023f] has been reserved
[ 0.489637] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.489637] system 00:06: [io 0x0300-0x030f] has been reserved
[ 0.489637] system 00:06: [io 0x0a30-0x0a3f] has been reserved
[ 0.489637] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.489856] pnp 00:08: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
[ 0.489883] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.489886] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.489888] system 00:08: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.489890] system 00:08: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.489986] pnp: PnP ACPI: found 9 devices
[ 0.496578] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.496665] NET: Registered PF_INET protocol family
[ 0.497064] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.500912] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.501015] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.501237] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.501730] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.502056] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.502276] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.502366] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.502440] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.502519] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.502527] NET: Registered PF_XDP protocol family
[ 0.502545] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.502548] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.502552] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.502554] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.502558] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.502561] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.502565] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.502567] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.502571] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.502575] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.502587] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.502589] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.502591] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.502593] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.502594] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window]
[ 0.502596] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.502598] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.502600] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.502601] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.502603] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.502605] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.502607] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.502609] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.502610] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.502612] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.502614] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.502615] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff window]
[ 0.502617] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff window]
[ 0.704870] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x720 took 197446 usecs
[ 0.731535] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x720 took 26029 usecs
[ 0.758199] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x720 took 25848 usecs
[ 0.784866] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x720 took 26032 usecs
[ 0.811530] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x720 took 25836 usecs
[ 0.811582] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.811767] PCI: CLS 64 bytes, default 64
[ 0.811856] Trying to unpack rootfs image as initramfs...
[ 0.812360] PCI-DMA: Disabling AGP.
[ 0.812415] PCI-DMA: aperture base @ c8000000 size 65536 KB
[ 0.812417] PCI-DMA: using GART IOMMU.
[ 0.812418] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.813186] software IO TLB: tearing down default memory pool
[ 0.815795] LVT offset 0 assigned for vector 0x400
[ 0.815892] perf: AMD IBS detected (0x000000ff)
[ 0.815896] amd_uncore: 4 amd_nb counters detected
[ 0.816522] Initialise system trusted keyrings
[ 0.816541] Key type blacklist registered
[ 0.816609] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.818616] zbud: loaded
[ 0.818880] integrity: Platform Keyring initialized
[ 0.818888] integrity: Machine keyring initialized
[ 0.818889] Key type asymmetric registered
[ 0.818890] Asymmetric key parser 'x509' registered
[ 1.630496] tsc: Refined TSC clocksource calibration: 3515.784 MHz
[ 1.630510] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32ad8fc41cb, max_idle_ns: 440795333030 ns
[ 1.630659] clocksource: Switched to clocksource tsc
[ 2.144775] Freeing initrd memory: 101412K
[ 2.149703] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 2.149734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.149794] io scheduler mq-deadline registered
[ 2.151509] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.151770] ACPI: \_PR_.P001: Found 2 idle states
[ 2.151871] ACPI: \_PR_.P002: Found 2 idle states
[ 2.151941] ACPI: \_PR_.P003: Found 2 idle states
[ 2.152011] ACPI: \_PR_.P004: Found 2 idle states
[ 2.152080] ACPI: \_PR_.P005: Found 2 idle states
[ 2.152149] ACPI: \_PR_.P006: Found 2 idle states
[ 2.152450] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.152591] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.153213] Linux agpgart interface v0.103
[ 2.153272] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 2.153789] i8042: PNP: No PS/2 controller found.
[ 2.153790] i8042: Probing ports directly.
[ 2.154147] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.154152] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.154269] mousedev: PS/2 mouse device common for all mice
[ 2.154296] rtc_cmos 00:01: RTC can wake from S4
[ 2.154516] rtc_cmos 00:01: registered as rtc0
[ 2.154545] rtc_cmos 00:01: setting system clock to 2023-11-05T01:09:03 UTC (1699146543)
[ 2.154577] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.154650] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.165912] NET: Registered PF_INET6 protocol family
[ 2.170491] Segment Routing with IPv6
[ 2.170505] In-situ OAM (IOAM) with IPv6
[ 2.170526] mip6: Mobile IPv6
[ 2.170530] NET: Registered PF_PACKET protocol family
[ 2.170564] mpls_gso: MPLS GSO support
[ 2.170566] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
[ 2.170916] microcode: microcode updated early to new patch_level=0x06000852
[ 2.170953] microcode: CPU0: patch_level=0x06000852
[ 2.170960] microcode: CPU1: patch_level=0x06000852
[ 2.170965] microcode: CPU2: patch_level=0x06000852
[ 2.170970] microcode: CPU3: patch_level=0x06000852
[ 2.170977] microcode: CPU4: patch_level=0x06000852
[ 2.170984] microcode: CPU5: patch_level=0x06000852
[ 2.170988] microcode: Microcode Update Driver: v2.2.
[ 2.170993] IPI shorthand broadcast: enabled
[ 2.171019] sched_clock: Marking stable (2168068939, 2812857)->(2190228127, -19346331)
[ 2.171306] registered taskstats version 1
[ 2.171315] Loading compiled-in X.509 certificates
[ 2.267279] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 2.267298] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 2.268112] zswap: loaded using pool lzo/zbud
[ 2.268338] Key type .fscrypt registered
[ 2.268339] Key type fscrypt-provisioning registered
[ 2.272272] Key type encrypted registered
[ 2.272277] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.272287] ima: No TPM chip found, activating TPM-bypass!
[ 2.272292] ima: Allocated hash algorithm: sha256
[ 2.272302] ima: No architecture policies found
[ 2.272313] evm: Initialising EVM extended attributes:
[ 2.272314] evm: security.selinux
[ 2.272315] evm: security.SMACK64 (disabled)
[ 2.272316] evm: security.SMACK64EXEC (disabled)
[ 2.272317] evm: security.SMACK64TRANSMUTE (disabled)
[ 2.272318] evm: security.SMACK64MMAP (disabled)
[ 2.272319] evm: security.apparmor
[ 2.272320] evm: security.ima
[ 2.272320] evm: security.capability
[ 2.272321] evm: HMAC attrs: 0x1
[ 2.392226] Freeing unused decrypted memory: 2036K
[ 2.393030] Freeing unused kernel image (initmem) memory: 2768K
[ 2.403902] Write protecting the kernel read-only data: 26624k
[ 2.404718] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 2.405128] Freeing unused kernel image (rodata/data gap) memory: 1576K
[ 2.444861] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.444866] Run /init as init process
[ 2.444867] with arguments:
[ 2.444869] /init
[ 2.444869] splash
[ 2.444870] with environment:
[ 2.444871] HOME=/
[ 2.444872] TERM=linux
[ 2.444873] BOOT_IMAGE=/@/boot/vmlinuz-6.1.0-1parrot1-amd64
[ 2.608197] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.608266] ACPI: button: Power Button [PWRB]
[ 2.608350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.620284] r8168: loading out-of-tree module taints kernel.
[ 2.621143] ACPI: button: Power Button [PWRF]
[ 2.624595] r8168 Gigabit Ethernet driver 8.051.02-NAPI loaded
[ 2.633144] ACPI: bus type USB registered
[ 2.633177] usbcore: registered new interface driver usbfs
[ 2.633191] usbcore: registered new interface driver hub
[ 2.633216] usbcore: registered new device driver usb
[ 2.645843] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 2.645849] r8168 Copyright (C) 2022 Realtek NIC software team <XXX@XXX>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 2.653254] ACPI: bus type drm_connector registered
[ 2.664528] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20220331/utaddress-204)
[ 2.664537] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20220331/utaddress-204)
[ 2.664542] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\SMRG) (20220331/utaddress-204)
[ 2.664546] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 2.665349] SCSI subsystem initialized
[ 2.665730] cryptd: max_cpu_qlen set to 1000
[ 2.666289] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.666302] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.666308] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.666321] ehci-pci 0000:00:12.2: debug port 1
[ 2.666378] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 2.677150] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.677524] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 2.677528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.677531] usb usb1: Product: EHCI Host Controller
[ 2.677533] usb usb1: Manufacturer: Linux 6.1.0-1parrot1-amd64 ehci_hcd
[ 2.677535] usb usb1: SerialNumber: ...
[ 2.680656] AVX version of gcm_enc/dec engaged.
[ 2.680701] AES CTR mode by8 optimization enabled
[ 2.681289] libata version 3.00 loaded.
[ 2.681310] hub 1-0:1.0: USB hub found
[ 2.681330] hub 1-0:1.0: 6 ports detected
[ 2.685519] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.685529] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 2.746112] xhci_hcd 0000:02:00.0: hcc params 0x0200e080 hci version 0x100 quirks 0x0000000010800410
[ 2.746435] ahci 0000:00:11.0: version 3.0
[ 2.746633] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.746637] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.747457] scsi host1: ahci
[ 2.748118] scsi host0: pata_atiixp
[ 2.748222] scsi host2: ahci
[ 2.749162] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 2.749167] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 2.749171] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
[ 2.749220] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.749252] scsi host3: pata_atiixp
[ 2.749314] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.749316] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.749430] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 2.749434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.749437] usb usb2: Product: xHCI Host Controller
[ 2.749439] usb usb2: Manufacturer: Linux 6.1.0-1parrot1-amd64 xhci-hcd
[ 2.749441] usb usb2: SerialNumber: ...
[ 2.749635] scsi host4: ahci
[ 2.750236] scsi host5: ahci
[ 2.750321] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
[ 2.750324] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
[ 2.750326] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
[ 2.750329] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
[ 2.750657] hub 2-0:1.0: USB hub found
[ 2.750671] hub 2-0:1.0: 2 ports detected
[ 2.750849] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.750878] r8168 0000:03:00.0 enp3s0: renamed from eth0
[ 2.750889] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 2.750892] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.750894] usb usb3: Product: xHCI Host Controller
[ 2.750895] usb usb3: Manufacturer: Linux 6.1.0-1parrot1-amd64 xhci-hcd
[ 2.750898] usb usb3: SerialNumber: ...
[ 2.751018] hub 3-0:1.0: USB hub found
[ 2.751030] hub 3-0:1.0: 2 ports detected
[ 2.751163] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 2.751168] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.751178] ehci-pci 0000:00:13.2: debug port 1
[ 2.751218] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe9ff400
[ 2.763826] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.763881] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 2.763884] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.763886] usb usb4: Product: EHCI Host Controller
[ 2.763887] usb usb4: Manufacturer: Linux 6.1.0-1parrot1-amd64 ehci_hcd
[ 2.763889] usb usb4: SerialNumber: ...
[ 2.764022] hub 4-0:1.0: USB hub found
[ 2.764032] hub 4-0:1.0: 6 ports detected
[ 3.064945] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.067184] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 3.223898] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.223931] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.223965] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.228156] ata6.00: ATA-10: ADATA SU635, XA004R22, max UDMA/133
[ 3.228897] ata3.00: ATA-10: KINGSTON SA400S37480G, SAH20105, max UDMA/133
[ 3.229248] ata6.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.231586] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 3.235657] ata6.00: configured for UDMA/133
[ 3.243171] ata3.00: configured for UDMA/133
[ 3.243419] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 0105 PQ: 0 ANSI: 5
[ 3.252273] ata4.00: ATA-10: ST2000DM008-2FR102, 0001, max UDMA/133
[ 3.262930] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 3.276357] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55
[ 3.276361] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 3.276363] usb 2-1: Product: USB2.1 Hub
[ 3.276364] usb 2-1: Manufacturer: GenesysLogic
[ 3.279793] hub 2-1:1.0: USB hub found
[ 3.280096] hub 2-1:1.0: 4 ports detected
[ 3.312855] ata4.00: configured for UDMA/133
[ 3.313044] scsi 2:0:0:0: Direct-Access ATA ST2000DM008-2FR1 0001 PQ: 0 ANSI: 5
[ 3.313446] scsi 5:0:0:0: Direct-Access ATA ADATA SU635 4R22 PQ: 0 ANSI: 5
[ 3.314510] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 3.314884] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 3.314927] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 3.328198] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.328205] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 3.328230] sd 1:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[ 3.328235] sd 5:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.328247] sd 2:0:0:0: [sda] Write Protect is off
[ 3.328249] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.328251] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.328252] sd 5:0:0:0: [sdc] Write Protect is off
[ 3.328253] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.328257] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.328281] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.328281] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.328285] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.328311] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 3.328319] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 3.328321] sd 1:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 3.374637] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 3.374642] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 3.374644] usb usb5: Product: OHCI PCI host controller
[ 3.374645] usb usb5: Manufacturer: Linux 6.1.0-1parrot1-amd64 ohci_hcd
[ 3.374647] usb usb5: SerialNumber: ...
[ 3.374829] hub 5-0:1.0: USB hub found
[ 3.374838] hub 5-0:1.0: 3 ports detected
[ 3.375149] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 3.375154] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 6
[ 3.375175] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 3.394117] [drm] radeon kernel modesetting enabled.
[ 3.394245] radeon 0000:01:00.0: vgaarb: deactivate vga console
[ 3.394257] sdc: sdc1 sdc2 < sdc5 >
[ 3.394451] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 3.395028] Console: switching to colour dummy device 80x25
[ 3.395242] [drm] initializing kernel modesetting (OLAND 0x1002:0x6610 0x1028:0x2120 0x00).
[ 3.395275] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[ 3.395279] caller pci_map_rom+0x79/0x1d0 mapping multiple BARs
[ 3.395286] radeon 0000:01:00.0: No more image in the PCI ROM
[ 3.396542] ATOM BIOS: DELL
[ 3.396636] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 3.396639] radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[ 3.396642] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 3.396643] [drm] RAM width 128bits DDR
[ 3.396663] [drm] radeon: 2048M of VRAM memory ready
[ 3.396664] [drm] radeon: 2048M of GTT memory ready.
[ 3.396671] [drm] Loading oland Microcode
[ 3.396698] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/oland_pfp.bin
[ 3.396722] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/oland_me.bin
[ 3.396741] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/oland_ce.bin
[ 3.396760] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/oland_rlc.bin
[ 3.396785] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/oland_mc.bin
[ 3.396820] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/oland_smc.bin
[ 3.396823] [drm] Internal thermal controller with fan control
[ 3.397435] sdb: sdb1
[ 3.397518] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.403400] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.403410] [drm] radeon: dpm initialized
[ 3.403502] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_uvd.bin
[ 3.403514] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 3.405504] [drm] PCIE gen 2 link speeds already enabled
[ 3.410122] sda: sda1 sda2 sda3
[ 3.410299] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.423781] usb 3-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.55
[ 3.423785] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 3.423787] usb 3-1: Product: USB3.1 Hub
[ 3.423789] usb 3-1: Manufacturer: GenesysLogic
[ 3.443304] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 3.443308] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 3.443310] usb usb6: Product: OHCI PCI host controller
[ 3.443311] usb usb6: Manufacturer: Linux 6.1.0-1parrot1-amd64 ohci_hcd
[ 3.443313] usb usb6: SerialNumber: ...
[ 3.449567] [drm] PCIE GART of 2048M enabled (table at 0x0000000000165000).
[ 3.449700] hub 3-1:1.0: USB hub found
[ 3.449739] hub 6-0:1.0: USB hub found
[ 3.449752] hub 6-0:1.0: 3 ports detected
[ 3.449972] radeon 0000:01:00.0: WB enabled
[ 3.449976] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00
[ 3.449979] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04
[ 3.449981] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08
[ 3.449983] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c
[ 3.449986] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10
[ 3.450401] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18
[ 3.450405] hub 3-1:1.0: 4 ports detected
[ 3.450607] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.450613] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 3.450645] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 3.450690] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 3.450720] radeon 0000:01:00.0: radeon: using MSI.
[ 3.450743] [drm] radeon: irq initialized.
[ 3.622642] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 3.622646] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 3.622648] usb usb7: Product: OHCI PCI host controller
[ 3.622650] usb usb7: Manufacturer: Linux 6.1.0-1parrot1-amd64 ohci_hcd
[ 3.622651] usb usb7: SerialNumber: ...
[ 3.622755] [drm] ring test on 0 succeeded in 1 usecs
[ 3.622760] [drm] ring test on 1 succeeded in 1 usecs
[ 3.622764] [drm] ring test on 2 succeeded in 1 usecs
[ 3.622770] [drm] ring test on 3 succeeded in 3 usecs
[ 3.622826] hub 7-0:1.0: USB hub found
[ 3.622839] hub 7-0:1.0: 3 ports detected
[ 3.623011] [drm] ring test on 4 succeeded in 3 usecs
[ 3.800141] [drm] ring test on 5 succeeded in 2 usecs
[ 3.800146] [drm] UVD initialized successfully.
[ 3.800351] [drm] ib test on ring 0 succeeded in 0 usecs
[ 3.800376] [drm] ib test on ring 1 succeeded in 0 usecs
[ 3.800406] [drm] ib test on ring 2 succeeded in 0 usecs
[ 3.800439] [drm] ib test on ring 3 succeeded in 0 usecs
[ 3.800465] [drm] ib test on ring 4 succeeded in 0 usecs
[ 3.951844] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 3.951850] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 8
[ 3.951877] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 4.011287] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 4.011291] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 4.011293] usb usb8: Product: OHCI PCI host controller
[ 4.011294] usb usb8: Manufacturer: Linux 6.1.0-1parrot1-amd64 ohci_hcd
[ 4.011296] usb usb8: SerialNumber: ...
[ 4.011477] hub 8-0:1.0: USB hub found
[ 4.011487] hub 8-0:1.0: 3 ports detected
[ 4.011820] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 4.011827] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
[ 4.011851] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fa000
[ 4.050555] usb 2-1.4: new full-speed USB device number 3 using xhci_hcd
[ 4.081328] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 4.081332] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 4.081334] usb usb9: Product: OHCI PCI host controller
[ 4.081335] usb usb9: Manufacturer: Linux 6.1.0-1parrot1-amd64 ohci_hcd
[ 4.081337] usb usb9: SerialNumber: ...
[ 4.081519] hub 9-0:1.0: USB hub found
[ 4.081531] hub 9-0:1.0: 2 ports detected
[ 4.100552] usb 5-1: new full-speed USB device number 2 using ohci-pci
[ 4.197908] usb 2-1.4: New USB device found, idVendor=8888, idProduct=1234, bcdDevice= 1.00
[ 4.197912] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 4.197914] usb 2-1.4: Product: FDUCE PRO AUDIO
[ 4.197916] usb 2-1.4: Manufacturer: FDUCE PRO AUDIO MADE
[ 4.197917] usb 2-1.4: SerialNumber: ...
[ 4.204491] hid: raw HID events driver (C) Jiri Kosina
[ 4.205623] usbhid 2-1.4:1.2: couldn't find an input interrupt endpoint
[ 4.205642] usbcore: registered new interface driver usbhid
[ 4.205644] usbhid: USB HID core driver
[ 4.207163] usb 6-2: new low-speed USB device number 2 using ohci-pci
[ 4.303673] usb 5-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 4.303684] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=...
[ 4.303690] usb 5-1: Product: CSR8510 A10
[ 4.410294] usb 6-2: New USB device found, idVendor=04f2, idProduct=0402, bcdDevice= 1.44
[ 4.410305] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 4.410311] usb 6-2: Product: USB Keyboard
[ 4.410315] usb 6-2: Manufacturer: Chicony
[ 4.446711] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb6/6-2/6-2:1.0/0003:04F2:0402.0001/input/input5
[ 4.457247] [drm] ib test on ring 5 succeeded
[ 4.457690] [drm] Radeon Display Connectors
[ 4.457691] [drm] Connector 0:
[ 4.457692] [drm] DP-1
[ 4.457693] [drm] HPD1
[ 4.457694] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 4.457696] [drm] Encoders:
[ 4.457697] [drm] DFP1: INTERNAL_UNIPHY
[ 4.457698] [drm] Connector 1:
[ 4.457698] [drm] DVI-I-1
[ 4.457699] [drm] HPD2
[ 4.457700] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 4.457701] [drm] Encoders:
[ 4.457702] [drm] DFP2: INTERNAL_UNIPHY
[ 4.457703] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.500685] hid-generic 0003:04F2:0402.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:12.1-2/input0
[ 4.500895] input: Chicony USB Keyboard System Control as /devices/pci0000:00/0000:00:12.1/usb6/6-2/6-2:1.1/0003:04F2:0402.0002/input/input6
[ 4.557243] input: Chicony USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.1/usb6/6-2/6-2:1.1/0003:04F2:0402.0002/input/input7
[ 4.557400] hid-generic 0003:04F2:0402.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:12.1-2/input1
[ 4.567835] [drm] fb mappable at 0xD0571000
[ 4.567837] [drm] vram apper at 0xD0000000
[ 4.567838] [drm] size 8294400
[ 4.567839] [drm] fb depth is 24
[ 4.567840] [drm] pitch is 7680
[ 4.567963] fbcon: radeondrmfb (fb0) is primary device
[ 4.651802] Console: switching to colour frame buffer device 240x67
[ 4.654745] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[ 4.670620] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 4.987203] usb 6-3: new low-speed USB device number 3 using ohci-pci
[ 5.172205] usb 6-3: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 5.172210] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 5.172212] usb 6-3: Product: USB Optical Mouse
[ 5.172213] usb 6-3: Manufacturer: PixArt
[ 5.179432] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:093A:2510.0003/input/input9
[ 5.179509] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.1-3/input0
[ 6.070756] [drm] amdgpu kernel modesetting enabled.
[ 6.070841] amdgpu: CRAT table not found
[ 6.070844] amdgpu: Virtual CRAT table created for CPU
[ 6.070856] amdgpu: Topology: Add CPU node
[ 6.213817] raid6: sse2x4 gen() 9053 MB/s
[ 6.270485] raid6: sse2x2 gen() 8132 MB/s
[ 6.327152] raid6: sse2x1 gen() 6504 MB/s
[ 6.327153] raid6: using algorithm sse2x4 gen() 9053 MB/s
[ 6.383816] raid6: .... xor() 3705 MB/s, rmw enabled
[ 6.383817] raid6: using ssse3x2 recovery algorithm
[ 6.384071] xor: automatically using best checksumming function avx
[ 6.480093] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[ 6.678632] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 6.696662] async_tx: api initialized (async)
[ 7.870473] random: crng init done
[ 8.035228] BTRFS: device fsid HASH_1D9-E1E3-3637-52E7-53026CC98935 devid 1 transid 81727 /dev/sdb1 scanned by btrfs (409)
[ 8.059027] BTRFS info (device sdb1): using crc32c (crc32c-intel) checksum algorithm
[ 8.059039] BTRFS info (device sdb1): using free space tree
[ 8.073305] BTRFS info (device sdb1): enabling ssd optimizations
[ 8.153259] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 8.282161] systemd[1]: Inserted module 'autofs4'
[ 8.297506] systemd[1]: systemd 252.5-2~bpo11+1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 8.297514] systemd[1]: Detected architecture x86-64.
[ 8.298307] systemd[1]: Hostname set to ...
[ 8.674894] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 8.687630] systemd[1]: Queued start job for default target graphical.target.
[ 8.714901] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 8.715249] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 8.715551] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 8.715771] systemd[1]: Created slice user.slice - User and Session Slice.
[ 8.715844] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 8.716009] systemd[1]: Set up automount ...
[ 8.716060] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 8.716088] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 8.716105] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 8.716118] systemd[1]: Reached target slices.target - Slice Units.
[ 8.716139] systemd[1]: Reached target swap.target - Swaps.
[ 8.716160] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 8.716237] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[ 8.716350] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[ 8.716910] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 8.716973] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 8.717131] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 8.717265] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 8.717390] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 8.718538] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 8.718650] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 8.719548] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 8.720491] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 8.721747] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 8.722957] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 8.723188] systemd[1]: Finished blk-availability.service - Availability of block devices.
[ 8.724819] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 8.725909] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 8.726958] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 8.728187] systemd[1]: Starting XXX@XXX - Load Kernel Module configfs...
[ 8.729533] systemd[1]: Starting XXX@XXX - Load Kernel Module drm...
[ 8.730920] systemd[1]: Starting XXX@XXX - Load Kernel Module efi_pstore...
[ 8.732368] systemd[1]: Starting XXX@XXX - Load Kernel Module fuse...
[ 8.732574] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 8.734477] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 8.736108] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 8.737409] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 8.737517] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 8.738795] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 8.740088] systemd[1]: Starting ufw.service - Uncomplicated firewall...
[ 8.742321] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 8.742784] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 8.742910] fuse: init (API version 7.37)
[ 8.743126] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 8.743492] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 8.744023] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 8.744552] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 8.745124] systemd[1]: XXX@XXX: Deactivated successfully.
[ 8.745330] systemd[1]: Finished XXX@XXX - Load Kernel Module configfs.
[ 8.745675] systemd[1]: XXX@XXX: Deactivated successfully.
[ 8.745910] systemd[1]: Finished XXX@XXX - Load Kernel Module drm.
[ 8.746238] systemd[1]: XXX@XXX: Deactivated successfully.
[ 8.746427] systemd[1]: Finished XXX@XXX - Load Kernel Module efi_pstore.
[ 8.746778] systemd[1]: XXX@XXX: Deactivated successfully.
[ 8.746957] systemd[1]: Finished XXX@XXX - Load Kernel Module fuse.
[ 8.747764] BTRFS info (device sdb1: state M): enabling auto defrag
[ 8.747770] BTRFS info (device sdb1: state M): turning on sync discard
[ 8.747774] BTRFS info (device sdb1: state M): use zstd compression, level 3
[ 8.748528] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 8.749702] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 8.751827] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 8.752709] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 8.752949] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 8.753177] systemd[1]: run-vmblock\x2dfuse.mount - VMware vmblock fuse mount was skipped because of an unmet condition check (ConditionVirtualization=vmware).
[ 8.753203] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 8.753241] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 8.754680] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 8.756200] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 8.756732] systemd[1]: Finished ufw.service - Uncomplicated firewall.
[ 8.760363] lp: driver loaded but no devices found
[ 8.764237] ppdev: user-space parallel port driver
[ 8.766145] parport_pc 00:02: reported by Plug and Play ACPI
[ 8.766286] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.769851] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ 8.770194] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 8.773134] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 8.774566] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 8.787306] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 8.789055] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 8.825595] systemd[1]: Finished lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 8.825977] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 8.850662] systemd[1]: Started systemd-journald.service - Journal Service.
[ 8.850787] lp0: using parport0 (interrupt-driven).
[ 8.859499] systemd-journald[501]: Received client request to flush runtime journal.
[ 9.071698] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 9.083718] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 9.092161] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 9.095844] acpi_cpufreq: overriding BIOS provided _PSD data
[ 9.120225] ATK0110 ATK0110:00: Overriding interface detection
[ 9.192815] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 9.198838] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 9.198969] sp5100-tco sp5100-tco: Failed to reserve MMIO or alternate MMIO region
[ 9.198974] sp5100-tco: probe of sp5100-tco failed with error -16
[ 9.286311] mc: Linux media interface: v0.10
[ 9.313396] kvm: support for 'kvm_amd' disabled by bios
[ 9.314050] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 9.317947] MCE: In-kernel MCE decoding enabled.
[ 9.323356] usb 2-1.4: Warning! Unlikely big volume range (=3996), cval->res is probably wrong.
[ 9.323361] usb 2-1.4: [5] FU [Mic Capture Volume] ch = 1, val = 0/3996/1
[ 9.325024] usbcore: registered new interface driver snd-usb-audio
[ 9.333946] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11
[ 9.334038] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
[ 9.366240] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 9.366254] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.366258] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 9.366261] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 9.366263] snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x21
[ 9.366265] snd_hda_codec_via hdaudioC0D0: inputs:
[ 9.366267] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 9.366270] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 9.366272] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 9.405912] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 9.405983] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 9.406049] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 9.406135] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 9.406205] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 9.406266] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 9.406346] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 9.406406] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 9.413323] Bluetooth: Core ver 2.22
[ 9.413450] NET: Registered PF_BLUETOOTH protocol family
[ 9.413453] Bluetooth: HCI device and connection manager initialized
[ 9.413460] Bluetooth: HCI socket layer initialized
[ 9.413462] Bluetooth: L2CAP socket layer initialized
[ 9.413469] Bluetooth: SCO socket layer initialized
[ 9.423725] usbcore: registered new interface driver btusb
[ 9.437389] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb; LMP ver=6 subver=22bb; manufacturer=10
[ 9.786031] loop0: detected capacity change from 0 to 426416
[ 9.792209] loop: module loaded
[ 9.792650] loop1: detected capacity change from 0 to 216720
[ 9.792799] loop2: detected capacity change from 0 to 8
[ 9.793418] loop3: detected capacity change from 0 to 151352
[ 9.793533] loop4: detected capacity change from 0 to 216592
[ 9.812560] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 9.820724] loop5: detected capacity change from 0 to 187776
[ 9.821427] loop6: detected capacity change from 0 to 426416
[ 9.840875] loop7: detected capacity change from 0 to 921912
[ 9.861575] loop8: detected capacity change from 0 to 1359840
[ 9.861578] loop9: detected capacity change from 0 to 386448
[ 9.861591] loop11: detected capacity change from 0 to 226616
[ 9.861876] loop12: detected capacity change from 0 to 226576
[ 9.861879] loop10: detected capacity change from 0 to 897608
[ 10.400055] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.400061] Bluetooth: BNEP filters: protocol multicast
[ 10.400065] Bluetooth: BNEP socket layer initialized
[ 10.402137] Bluetooth: MGMT ver 1.22
[ 10.411074] NET: Registered PF_ALG protocol family
[ 10.605286] enp3s0: 0xffffa62c80061000, XX:XX:XX:XX:XX:XX, IRQ 27
[ 10.666283] NET: Registered PF_QIPCRTR protocol family
[ 11.391305] loop13: detected capacity change from 0 to 8
[ 14.735359] r8168: enp3s0: link up
[ 14.735415] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 98.183443] Bluetooth: RFCOMM TTY layer initialized
[ 98.183451] Bluetooth: RFCOMM socket layer initialized
[ 98.183458] Bluetooth: RFCOMM ver 1.11
[ 3420.132411] Non-volatile memory driver v1.3
[ 3420.317499] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 3422.039710] r8168 0000:03:00.0: invalid VPD tag 0xff (size 0) at offset 0; assume missing optional EEPROM