Probe #4e1c736ebd of Raspberry Pi Foundation Raspberry Pi 4 Model...

Log: dmesg

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.13.0-1016-raspi (XXX@XXX) (gcc (Ubuntu 11.2.0-7ubuntu2) 11.2.0, GNU ld (GNU Binutils for Ubuntu) 2.37) #18-Ubuntu SMP PREEMPT Thu Jan 20 08:53:01 UTC 2022 (Ubuntu 5.13.0-1016.18-raspi 5.13.19) [ 0.000000] random: fast init done [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001a000000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 2048000 [ 0.000000] DMA zone: 3584 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 229376 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 12288 pages used for memmap [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 33 pages/cpu s96344 r8192 d30632 u135168 [ 0.000000] pcpu-alloc: s96344 r8192 d30632 u135168 alloc=33*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2015744 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:3840x2160M@30 smsc95xx.macaddr=XX:XX:XX:XX:XX:XX vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc quiet splash [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000034000000-0x0000000038000000] (64MB) [ 0.000000] Memory: 7598996K/8192000K available (13376K kernel code, 1960K rwdata, 5060K rodata, 4416K init, 1132K bss, 265324K reserved, 327680K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x30/0x2e4 with crng_init=1 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 43378 entries in 170 pages [ 0.000000] ftrace: allocated 170 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10) [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000276] Console: colour dummy device 80x25 [ 0.000337] printk: console [tty1] enabled [ 0.000389] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000415] pid_max: default: 32768 minimum: 301 [ 0.000602] LSM: Security Framework initializing [ 0.000655] Yama: becoming mindful. [ 0.000756] AppArmor: AppArmor initialized [ 0.000985] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001092] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.004271] rcu: Hierarchical SRCU implementation. [ 0.005956] EFI services will not be available. [ 0.006871] smp: Bringing up secondary CPUs ... [ 0.008022] Detected PIPT I-cache on CPU1 [ 0.008098] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.009301] Detected PIPT I-cache on CPU2 [ 0.009351] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.010526] Detected PIPT I-cache on CPU3 [ 0.010574] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.010730] smp: Brought up 1 node, 4 CPUs [ 0.010751] SMP: Total of 4 processors activated. [ 0.010763] CPU features: detected: 32-bit EL0 Support [ 0.010774] CPU features: detected: 32-bit EL1 Support [ 0.010786] CPU features: detected: CRC32 instructions [ 0.011194] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.048382] CPU: All CPU(s) started at EL2 [ 0.048454] alternatives: patching kernel code [ 0.051326] devtmpfs: initialized [ 0.061950] Enabled cp15_barrier support [ 0.061989] Enabled setend support [ 0.062008] KASLR enabled [ 0.062206] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.062234] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.073364] pinctrl core: initialized pinctrl subsystem [ 0.074134] DMI not present or invalid. [ 0.074811] NET: Registered protocol family 16 [ 0.078162] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.078499] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.079392] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.080346] thermal_sys: Registered thermal governor 'fair_share' [ 0.080361] thermal_sys: Registered thermal governor 'bang_bang' [ 0.080371] thermal_sys: Registered thermal governor 'step_wise' [ 0.080381] thermal_sys: Registered thermal governor 'user_space' [ 0.080603] cpuidle: using governor ladder [ 0.080654] cpuidle: using governor menu [ 0.081064] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.081242] ASID allocator initialised with 32768 entries [ 0.081444] Serial: AMBA PL011 UART driver [ 0.093788] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.120347] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-08-31T14:52:47, variant start [ 0.124366] raspberrypi-firmware soc:firmware: Firmware hash is 67615e950e1e28b92dfae6303cf7a8b879a8908f [ 0.163104] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.163131] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.163145] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.163157] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.175369] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.179282] iommu: Default domain type: Translated [ 0.180539] SCSI subsystem initialized [ 0.180795] libata version 3.00 loaded. [ 0.181003] usbcore: registered new interface driver usbfs [ 0.181063] usbcore: registered new interface driver hub [ 0.181119] usbcore: registered new device driver usb [ 0.181528] pps_core: LinuxPPS API ver. 1 registered [ 0.181540] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.181564] PTP clock support registered [ 0.181877] EDAC MC: Ver: 3.0.0 [ 0.183302] NetLabel: Initializing [ 0.183316] NetLabel: domain hash size = 128 [ 0.183327] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.183409] NetLabel: unlabeled traffic allowed by default [ 0.184437] clocksource: Switched to clocksource arch_sys_counter [ 0.273045] VFS: Disk quotas dquot_6.6.0 [ 0.273148] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.274136] AppArmor: AppArmor Filesystem Enabled [ 0.275439] simple-framebuffer 3e29a000.framebuffer: framebuffer at 0x3e29a000, 0x960000 bytes [ 0.275462] simple-framebuffer 3e29a000.framebuffer: format=a8r8g8b8, mode=1920x1280x32, linelength=7680 [ 0.276048] Console: switching to colour frame buffer device 240x80 [ 0.287713] simple-framebuffer 3e29a000.framebuffer: fb0: simplefb registered! [ 0.297942] NET: Registered protocol family 2 [ 0.298817] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.304386] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.304503] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.304976] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.305929] TCP: Hash tables configured (established 65536 bind 65536) [ 0.306649] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.306851] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.306953] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.307313] NET: Registered protocol family 1 [ 0.307349] NET: Registered protocol family 44 [ 0.307369] PCI: CLS 0 bytes, default 64 [ 0.307720] Trying to unpack rootfs image as initramfs... [ 0.310110] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.310418] kvm [1]: IPA Size Limit: 44 bits [ 0.311917] kvm [1]: vgic interrupt IRQ9 [ 0.312379] kvm [1]: Hyp mode initialized successfully [ 0.314145] Initialise system trusted keyrings [ 0.314208] Key type blacklist registered [ 0.314564] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.320837] zbud: loaded [ 0.322632] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.323633] fuse: init (API version 7.34) [ 0.390810] Key type asymmetric registered [ 0.390839] Asymmetric key parser 'x509' registered [ 0.390917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) [ 0.391175] io scheduler mq-deadline registered [ 0.399575] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.399623] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 0.399696] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 0.399768] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [ 0.462608] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 0.463000] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.463022] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 0.463042] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.463121] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.463332] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.467808] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.467936] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.468382] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.472646] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff] [ 0.472684] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.472722] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.472743] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.473158] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 0.473389] pcieport 0000:00:00.0: PME: Signaling with IRQ 69 [ 0.473890] pcieport 0000:00:00.0: AER: enabled with IRQ 69 [ 0.547362] iproc-rng200 fe104000.rng: hwrng registered [ 0.547946] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.548844] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.692672] loop: module loaded [ 0.697787] libphy: Fixed MDIO Bus: probed [ 0.698368] tun: Universal TUN/TAP device driver, 1.6 [ 0.699382] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 0.700463] libphy: bcmgenet MII bus: probed [ 1.438742] Freeing initrd memory: 14700K [ 1.476578] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.477599] PPP generic driver version 2.4.2 [ 1.477915] usbcore: registered new interface driver lan78xx [ 1.477969] usbcore: registered new interface driver smsc95xx [ 1.478013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.478071] ehci-pci: EHCI PCI platform driver [ 1.478131] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.478151] ohci-pci: OHCI PCI platform driver [ 1.478206] uhci_hcd: USB Universal Host Controller Interface driver [ 1.478310] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.478649] dwc_otg: FIQ enabled [ 1.478660] dwc_otg: NAK holdoff enabled [ 1.478669] dwc_otg: FIQ split-transaction FSM enabled [ 1.478682] Module dwc_common_port init [ 1.479290] mousedev: PS/2 mouse device common for all mice [ 1.479823] i2c /dev entries driver [ 1.483478] device-mapper: uevent: version 1.0.3 [ 1.483786] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 1.486869] sdhci: Secure Digital Host Controller Interface driver [ 1.486886] sdhci: Copyright(c) Pierre Ossman [ 1.487438] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.492939] ledtrig-cpu: registered to indicate activity on CPUs [ 1.493034] hid: raw HID events driver (C) Jiri Kosina [ 1.497117] drop_monitor: Initializing network drop monitor service [ 1.497522] NET: Registered protocol family 10 [ 1.522868] Segment Routing with IPv6 [ 1.522941] NET: Registered protocol family 17 [ 1.523051] Key type dns_resolver registered [ 1.523597] registered taskstats version 1 [ 1.523637] Loading compiled-in X.509 certificates [ 1.525121] Loaded X.509 cert 'Build time autogenerated kernel key: e6d08419606f504b109ada9e6a19285c5da5bcde' [ 1.526294] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.527469] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.527475] blacklist: Loading compiled-in revocation X.509 certificates [ 1.527526] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.527878] Key type ._fscrypt registered [ 1.527885] Key type .fscrypt registered [ 1.527889] Key type fscrypt-provisioning registered [ 1.539457] Key type encrypted registered [ 1.539478] AppArmor: AppArmor sha1 policy hashing enabled [ 1.539505] ima: No TPM chip found, activating TPM-bypass! [ 1.539534] ima: Allocated hash algorithm: sha1 [ 1.539570] ima: No architecture policies found [ 1.539613] evm: Initialising EVM extended attributes: [ 1.539618] evm: security.selinux [ 1.539624] evm: security.SMACK64 [ 1.539629] evm: security.SMACK64EXEC [ 1.539634] evm: security.SMACK64TRANSMUTE [ 1.539639] evm: security.SMACK64MMAP [ 1.539644] evm: security.apparmor [ 1.539649] evm: security.ima [ 1.539654] evm: security.capability [ 1.539659] evm: HMAC attrs: 0x1 [ 1.545184] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.545350] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.545432] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2 [ 1.550528] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.550788] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.551455] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.551466] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.579950] of_cfs_init [ 1.580085] of_cfs_init: OK [ 1.594310] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.595859] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.597416] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.600201] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.601753] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.618357] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.627403] Freeing unused kernel memory: 4416K [ 1.658982] mmc1: new high speed SDIO card at address 0001 [ 1.678156] Checked W+X mappings: passed, no W+X pages found [ 1.678182] Run /init as init process [ 1.678188] with arguments: [ 1.678193] /init [ 1.678198] fixrtc [ 1.678202] splash [ 1.678206] with environment: [ 1.678210] HOME=/ [ 1.678214] TERM=linux [ 1.719447] mmc0: new ultra high speed DDR50 SDXC card at address aaaa [ 1.720078] mmcblk0: mmc0:aaaa SN64G 59.5 GiB [ 1.722091] mmcblk0: p1 p2 [ 2.160080] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 2.229576] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.229605] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 2.229996] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890 [ 2.231908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 2.231928] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.231934] usb usb1: Product: xHCI Host Controller [ 2.231939] usb usb1: Manufacturer: Linux 5.13.0-1016-raspi xhci-hcd [ 2.231945] usb usb1: SerialNumber: ... [ 2.232377] hub 1-0:1.0: USB hub found [ 2.232579] hub 1-0:1.0: 1 port detected [ 2.233010] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 2.233024] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 2.233037] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 2.233283] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 2.233292] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.233299] usb usb2: Product: xHCI Host Controller [ 2.233304] usb usb2: Manufacturer: Linux 5.13.0-1016-raspi xhci-hcd [ 2.233309] usb usb2: SerialNumber: ... [ 2.233741] hub 2-0:1.0: USB hub found [ 2.233789] hub 2-0:1.0: 4 ports detected [ 2.236793] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 2.238109] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 2.297345] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator [ 2.297522] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator [ 2.504517] dwc2 fe980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 2.504754] dwc2 fe980000.usb: DWC OTG Controller [ 2.504773] dwc2 fe980000.usb: new USB bus registered, assigned bus number 3 [ 2.504801] dwc2 fe980000.usb: irq 27, io mem 0xfe980000 [ 2.504981] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 2.504991] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.504997] usb usb3: Product: DWC OTG Controller [ 2.505002] usb usb3: Manufacturer: Linux 5.13.0-1016-raspi dwc2_hsotg [ 2.505008] usb usb3: SerialNumber: ... [ 2.505406] hub 3-0:1.0: USB hub found [ 2.505440] hub 3-0:1.0: 1 port detected [ 2.515321] SPI driver spidev has no spi_device_id for rohm,dh2228fv [ 2.515336] SPI driver spidev has no spi_device_id for lineartechnology,ltc2488 [ 2.515341] SPI driver spidev has no spi_device_id for ge,achc [ 2.515345] SPI driver spidev has no spi_device_id for semtech,sx1301 [ 2.515349] SPI driver spidev has no spi_device_id for lwn,bk4 [ 2.515353] SPI driver spidev has no spi_device_id for dh,dhcom-board [ 2.515357] SPI driver spidev has no spi_device_id for menlo,m53cpld [ 2.515362] SPI driver spidev has no spi_device_id for cisco,spi-petra [ 2.515366] SPI driver spidev has no spi_device_id for micron,spi-authenta [ 2.568828] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 2.590746] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 2.590767] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.590781] usb 2-2: Product: Wireless [ 2.590792] usb 2-2: Manufacturer: MediaTek Inc. [ 2.590803] usb 2-2: SerialNumber: ... [ 2.716466] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.867068] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 2.867089] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.867103] usb 1-1: Product: USB2.0 Hub [ 2.868657] hub 1-1:1.0: USB hub found [ 2.868952] hub 1-1:1.0: 4 ports detected [ 3.048454] raid6: neonx8 gen() 42288 MB/s [ 3.096431] raid6: neonx8 xor() 41443 MB/s [ 3.144436] raid6: neonx4 gen() 60243 MB/s [ 3.192430] raid6: neonx4 xor() 45080 MB/s [ 3.192443] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd [ 3.240434] raid6: neonx2 gen() 54352 MB/s [ 3.288431] raid6: neonx2 xor() 40515 MB/s [ 3.292897] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 3.292906] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 3.292912] usb 1-1.3: Product: USB 2.0 Hub [ 3.294192] hub 1-1.3:1.0: USB hub found [ 3.294398] hub 1-1.3:1.0: 4 ports detected [ 3.336446] raid6: neonx1 gen() 42255 MB/s [ 3.384440] raid6: neonx1 xor() 33270 MB/s [ 3.432434] raid6: int64x8 gen() 37491 MB/s [ 3.480434] raid6: int64x8 xor() 21910 MB/s [ 3.528430] raid6: int64x4 gen() 39347 MB/s [ 3.576430] raid6: int64x4 xor() 22465 MB/s [ 3.624430] raid6: int64x2 gen() 37059 MB/s [ 3.672429] raid6: int64x2 xor() 20013 MB/s [ 3.720437] raid6: int64x1 gen() 28493 MB/s [ 3.720447] usb 1-1.3.1: new high-speed USB device number 4 using xhci_hcd [ 3.768434] raid6: int64x1 xor() 14897 MB/s [ 3.768441] raid6: using algorithm neonx4 gen() 2662 MB/s [ 3.768445] raid6: .... xor() 45080 MB/s, rmw enabled [ 3.768450] raid6: using neon recovery algorithm [ 3.775970] xor: measuring software checksum speed [ 3.777569] 8regs : 6305 MB/sec [ 3.778931] 32regs : 7259 MB/sec [ 3.782037] arm64_neon : 3206 MB/sec [ 3.782043] xor: using function: 32regs (7259 MB/sec) [ 3.841509] Btrfs loaded, crc32c=crc32c-generic, zoned=yes [ 3.931142] usb 1-1.3.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04 [ 3.931175] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.931189] usb 1-1.3.1: Product: 4-Port USB 2.0 Hub [ 3.931201] usb 1-1.3.1: Manufacturer: Generic [ 3.933470] hub 1-1.3.1:1.0: USB hub found [ 3.934108] hub 1-1.3.1:1.0: 4 ports detected [ 4.136470] usb 1-1.3.2: new full-speed USB device number 5 using xhci_hcd [ 4.186088] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 4.384238] usb 1-1.3.2: language id specifier not provided by device, defaulting to English [ 4.399753] usb 1-1.3.2: New USB device found, idVendor=045e, idProduct=07b2, bcdDevice= 7.23 [ 4.399779] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.440483] usb 1-XXX.XXX.XXX.XXX: new full-speed USB device number 6 using xhci_hcd [ 4.560289] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=0b0e, idProduct=0420, bcdDevice= 2.10 [ 4.560321] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 4.560335] usb 1-XXX.XXX.XXX.XXX: Product: Jabra SPEAK 510 USB [ 4.560347] usb 1-XXX.XXX.XXX.XXX: SerialNumber: ... [ 4.748480] usb 1-1.3.3: new full-speed USB device number 7 using xhci_hcd [ 4.975612] usb 1-1.3.3: New USB device found, idVendor=1bcf, idProduct=08a0, bcdDevice= 1.04 [ 4.975642] usb 1-1.3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 5.009087] systemd[1]: Inserted module 'autofs4' [ 5.048461] usb 1-XXX.XXX.XXX.XXX: new high-speed USB device number 8 using xhci_hcd [ 5.081133] systemd[1]: systemd 248.3-1ubuntu8.2 running in system mode. (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.082652] systemd[1]: Detected architecture arm64. [ 5.084867] systemd[1]: Hostname set to ... [ 5.744659] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=046d, idProduct=08e5, bcdDevice= 0.21 [ 5.744685] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 5.744696] usb 1-XXX.XXX.XXX.XXX: Product: HD Pro Webcam C920 [ 5.744705] usb 1-XXX.XXX.XXX.XXX: SerialNumber: ... [ 5.781578] random: lvmconfig: uninitialized urandom read (4 bytes read) [ 6.419867] systemd[1]: Condition check resulted in System Slice being skipped. [ 6.423034] systemd[1]: Queued start job for default target Graphical Interface. [ 6.460156] systemd[1]: Created slice system-modprobe.slice. [ 6.464923] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.468254] systemd[1]: Created slice system-systemd\x2dgrowfs.slice. [ 6.469821] systemd[1]: Created slice User and Session Slice. [ 6.470257] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.471165] systemd[1]: Set up automount ... [ 6.471429] systemd[1]: Reached target Remote File Systems. [ 6.471485] systemd[1]: Reached target Slices. [ 6.471597] systemd[1]: Reached target Local Verity Integrity Protected Volumes. [ 6.472012] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 6.472716] systemd[1]: Listening on LVM2 poll daemon socket. [ 6.473335] systemd[1]: Listening on Syslog Socket. [ 6.473849] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.474115] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.475058] systemd[1]: Listening on Journal Audit Socket. [ 6.475569] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.476196] systemd[1]: Listening on Journal Socket. [ 6.476929] systemd[1]: Listening on udev Control Socket. [ 6.477419] systemd[1]: Listening on udev Kernel Socket. [ 6.481348] systemd[1]: Mounting Huge Pages File System... [ 6.485839] systemd[1]: Mounting POSIX Message Queue File System... [ 6.491210] systemd[1]: Mounting Kernel Debug File System... [ 6.495871] systemd[1]: Mounting Kernel Trace File System... [ 6.503279] systemd[1]: Starting Journal Service... [ 6.504124] systemd[1]: Finished Availability of block devices. [ 6.509412] systemd[1]: Starting Set the console keyboard layout... [ 6.514347] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.519436] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 6.524835] systemd[1]: Starting Load Kernel Module configfs... [ 6.530091] systemd[1]: Starting Load Kernel Module drm... [ 6.534831] systemd[1]: Starting Load Kernel Module fuse... [ 6.535797] random: lvm: uninitialized urandom read (4 bytes read) [ 6.554783] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.566880] systemd[1]: Starting Load Kernel Modules... [ 6.571692] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.579389] systemd[1]: Starting Coldplug All udev Devices... [ 6.584247] systemd[1]: Starting Uncomplicated firewall... [ 6.594680] systemd[1]: Mounted Huge Pages File System. [ 6.595258] systemd[1]: Mounted POSIX Message Queue File System. [ 6.595806] systemd[1]: Mounted Kernel Debug File System. [ 6.596371] systemd[1]: Mounted Kernel Trace File System. [ 6.598794] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.601585] systemd[1]: XXX@XXX: Deactivated successfully. [ 6.603631] systemd[1]: Finished Load Kernel Module configfs. [ 6.611283] systemd[1]: XXX@XXX: Deactivated successfully. [ 6.613318] systemd[1]: Finished Load Kernel Module fuse. [ 6.618811] systemd[1]: Mounting FUSE Control File System... [ 6.632766] systemd[1]: Mounting Kernel Configuration File System... [ 6.639668] systemd[1]: XXX@XXX: Deactivated successfully. [ 6.643698] systemd[1]: Finished Load Kernel Module drm. [ 6.648802] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 6.657001] systemd[1]: Finished Load Kernel Modules. [ 6.659507] systemd[1]: Finished Uncomplicated firewall. [ 6.660256] systemd[1]: Mounted FUSE Control File System. [ 6.660816] systemd[1]: Mounted Kernel Configuration File System. [ 6.664177] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 6.689724] systemd[1]: Starting Apply Kernel Variables... [ 6.695479] systemd[1]: Started Journal Service. [ 6.728660] EXT4-fs (mmcblk0p2): resizing filesystem from 15526139 to 15526139 blocks [ 6.754922] systemd-journald[317]: Received client request to flush runtime journal. [ 6.776986] Adding 1048572k swap on /swapfile. Priority:-2 extents:3 across:5660696k SSFS [ 6.810813] systemd-journald[317]: File /var/log/journal/f902a82f786442d1bc2d2bd2b0150718/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 7.237660] loop0: detected capacity change from 0 to 8 [ 7.265368] loop1: detected capacity change from 0 to 100296 [ 7.292920] loop2: detected capacity change from 0 to 100256 [ 7.293312] loop3: detected capacity change from 0 to 117720 [ 7.329786] loop4: detected capacity change from 0 to 117728 [ 7.357266] loop5: detected capacity change from 0 to 330360 [ 7.357728] loop6: detected capacity change from 0 to 330360 [ 7.377833] loop7: detected capacity change from 0 to 404624 [ 7.417792] loop8: detected capacity change from 0 to 468792 [ 7.479803] loop9: detected capacity change from 0 to 132648 [ 7.557539] loop10: detected capacity change from 0 to 404624 [ 7.597125] loop11: detected capacity change from 0 to 133552 [ 7.673034] loop12: detected capacity change from 0 to 462128 [ 7.717132] loop13: detected capacity change from 0 to 98864 [ 7.779119] loop14: detected capacity change from 0 to 107600 [ 7.855233] loop15: detected capacity change from 0 to 76728 [ 7.917602] loop16: detected capacity change from 0 to 77016 [ 8.232248] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 8.236545] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 8.236952] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 8.237225] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 8.239402] mc: Linux media interface: v0.10 [ 8.268142] videodev: Linux video capture interface: v2.00 [ 8.334993] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.349228] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 8.349258] [vc_sm_connected_init]: start [ 8.356847] [vc_sm_connected_init]: installed successfully [ 8.364965] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.381486] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 8.386653] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 8.386699] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 8.398342] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 8.400729] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 8.403002] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 8.408990] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 8.409035] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 8.413731] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 8.413764] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 8.422726] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 8.423033] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 8.430556] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 8.431940] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 8.431980] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 8.431996] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 8.432005] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 8.432014] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 8.432362] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 8.509318] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.519526] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.598952] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 8.662873] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 8.692401] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.693037] usbcore: registered new interface driver brcmfmac [ 8.769213] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 8.776833] bcm2835_audio bcm2835_audio: card created with 8 channels [ 8.810996] usbcore: registered new interface driver usbhid [ 8.811014] usbhid: USB HID core driver [ 8.908311] usb 1-XXX.XXX.XXX.XXX: Found UVC 1.00 device HD Pro Webcam C920 (046d:08e5) [ 8.933411] input: HD Pro Webcam C920 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.1/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.0/input/input0 [ 8.933682] usbcore: registered new interface driver uvcvideo [ 9.031876] usb 1-XXX.XXX.XXX.XXX: 1:1: cannot set freq 48000 to ep 0x3 [ 9.037978] Bluetooth: Core ver 2.22 [ 9.038087] NET: Registered protocol family 31 [ 9.038094] Bluetooth: HCI device and connection manager initialized [ 9.038112] Bluetooth: HCI socket layer initialized [ 9.038120] Bluetooth: L2CAP socket layer initialized [ 9.038136] Bluetooth: SCO socket layer initialized [ 9.112443] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.119953] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.127577] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 9.190039] checking generic (3e29a000 960000) vs hw (0 ffffffffffffffff) [ 9.190057] fb0: switching to vc4drmfb from simple [ 9.190347] Console: switching to colour dummy device 80x25 [ 9.211203] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.227286] Registered IR keymap rc-cec [ 9.227419] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 9.227513] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1 [ 9.228109] vc4_hdmi fef00700.hdmi: Could not register sound card: -517 [ 9.636536] input: HID 045e:07b2 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:045E:07B2.0001/input/input2 [ 9.697427] hid-generic 0003:045E:07B2.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 045e:07b2] on usb-0000:01:00.0-1.3.2/input0 [ 9.700253] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.700991] input: HID 045e:07b2 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.1/0003:045E:07B2.0002/input/input3 [ 9.701339] Registered IR keymap rc-cec [ 9.701351] input: HID 045e:07b2 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.1/0003:045E:07B2.0002/input/input4 [ 9.701436] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 9.701528] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input5 [ 9.701566] hid-generic 0003:045E:07B2.0002: input,hidraw1: USB HID v1.11 Mouse [HID 045e:07b2] on usb-0000:01:00.0-1.3.2/input1 [ 9.703393] input: HID 045e:07b2 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/0003:045E:07B2.0003/input/input6 [ 9.704166] vc4_hdmi fef00700.hdmi: Could not register sound card: -517 [ 9.769001] input: HID 045e:07b2 System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/0003:045E:07B2.0003/input/input8 [ 9.817184] hid-generic 0003:045E:07B2.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [HID 045e:07b2] on usb-0000:01:00.0-1.3.2/input2 [ 9.819324] input: HID 1bcf:08a0 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:1BCF:08A0.0004/input/input9 [ 9.820008] input: HID 1bcf:08a0 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:1BCF:08A0.0004/input/input10 [ 9.820649] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.821757] Registered IR keymap rc-cec [ 9.821897] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 9.822041] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input12 [ 9.878671] input: HID 1bcf:08a0 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:1BCF:08A0.0004/input/input11 [ 9.878920] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.879802] hid-generic 0003:1BCF:08A0.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [HID 1bcf:08a0] on usb-0000:01:00.0-1.3.3/input0 [ 9.884166] Registered IR keymap rc-cec [ 9.884291] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 9.884392] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input13 [ 9.887800] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.888036] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 9.888174] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.888295] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.888398] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.888554] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.888675] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.903055] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 9.969772] vc4-drm gpu: [drm] The core clock cannot reach frequencies high enough to support 4k @ 60Hz. [ 9.969792] vc4-drm gpu: [drm] Please change your config.txt file to add hdmi_enable_4kp60. [ 10.025586] Console: switching to colour frame buffer device 480x135 [ 10.086967] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 10.117314] usbcore: registered new interface driver snd-usb-audio [ 11.334199] random: crng init done [ 13.330730] uart-pl011 fe201000.serial: no DMA platform data [ 16.092096] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 16.092395] bcmgenet fd580000.ethernet eth0: Link is Down [ 16.176574] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 17.784930] loop17: detected capacity change from 0 to 8 [ 18.868884] usb 1-XXX.XXX.XXX.XXX: reset high-speed USB device number 8 using xhci_hcd [ 20.164617] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 20.164675] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.308222] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 20.308309] MAI: soc_pcm_open() failed (-19) [ 20.311593] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 20.311677] MAI: soc_pcm_open() failed (-19) [ 20.315538] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 20.315640] MAI: soc_pcm_open() failed (-19) [ 20.317881] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 20.317960] MAI: soc_pcm_open() failed (-19) [ 20.318639] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 20.318721] MAI: soc_pcm_open() failed (-19) [ 20.415230] Bluetooth: HCI UART driver ver 2.3 [ 20.415255] Bluetooth: HCI UART protocol H4 registered [ 20.415260] Bluetooth: HCI UART protocol BCSP registered [ 20.415358] Bluetooth: HCI UART protocol LL registered [ 20.415365] Bluetooth: HCI UART protocol ATH3K registered [ 20.415400] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 20.415576] Bluetooth: HCI UART protocol Intel registered [ 20.415714] Bluetooth: HCI UART protocol Broadcom registered [ 20.415767] Bluetooth: HCI UART protocol QCA registered [ 20.415775] Bluetooth: HCI UART protocol AG6XX registered [ 20.415809] Bluetooth: HCI UART protocol Marvell registered [ 21.147025] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 21.198317] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.198338] Bluetooth: BNEP filters: protocol multicast [ 21.198356] Bluetooth: BNEP socket layer initialized [ 21.259899] NET: Registered protocol family 38 [ 29.992734] rfkill: input handler disabled [ 40.788739] rfkill: input handler enabled [ 42.808989] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 42.809075] MAI: soc_pcm_open() failed (-19) [ 42.812906] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 42.812977] MAI: soc_pcm_open() failed (-19) [ 42.817221] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 42.817300] MAI: soc_pcm_open() failed (-19) [ 42.817792] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 42.817854] MAI: soc_pcm_open() failed (-19) [ 42.818293] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 42.818339] MAI: soc_pcm_open() failed (-19) [ 42.932964] Bluetooth: RFCOMM TTY layer initialized [ 42.933005] Bluetooth: RFCOMM socket layer initialized [ 42.933030] Bluetooth: RFCOMM ver 1.11 [ 49.144247] rfkill: input handler disabled [ 171.855127] usb 2-2: USB disconnect, device number 2 [ 174.715063] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd [ 174.736938] usb 2-2: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 174.736975] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 174.736989] usb 2-2: Product: Wireless [ 174.737001] usb 2-2: Manufacturer: MediaTek Inc. [ 174.737012] usb 2-2: SerialNumber: ... [ 328.836954] usb 2-2: USB disconnect, device number 3 [ 896.621953] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd [ 896.643984] usb 2-1: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 896.644018] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 896.644032] usb 2-1: Product: Wireless [ 896.644044] usb 2-1: Manufacturer: MediaTek Inc. [ 896.644054] usb 2-1: SerialNumber: ... [ 929.594503] usb 2-1: USB disconnect, device number 4 [ 934.546440] usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd [ 934.568398] usb 2-1: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 934.568437] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 934.568451] usb 2-1: Product: Wireless [ 934.568463] usb 2-1: Manufacturer: MediaTek Inc. [ 934.568474] usb 2-1: SerialNumber: ... [ 4919.107341] usb 2-1: USB disconnect, device number 5 [ 4922.079006] usb 1-1.1: new high-speed USB device number 9 using xhci_hcd [ 4922.179947] usb 1-1.1: New USB device found, idVendor=2357, idProduct=0106, bcdDevice= 0.00 [ 4922.179982] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4922.179999] usb 1-1.1: Product: 802.11ac NIC [ 4922.180013] usb 1-1.1: Manufacturer: Realtek [ 4922.180026] usb 1-1.1: SerialNumber: ... [ 4961.797166] usb 1-1.1: USB disconnect, device number 9 [ 4987.468702] usb 2-1: new SuperSpeed USB device number 6 using xhci_hcd [ 4987.490758] usb 2-1: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 4987.490797] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 4987.490812] usb 2-1: Product: Wireless [ 4987.490824] usb 2-1: Manufacturer: MediaTek Inc. [ 4987.490836] usb 2-1: SerialNumber: ... [ 5033.618298] rfkill: input handler enabled [ 5036.452146] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 5036.452219] MAI: soc_pcm_open() failed (-19) [ 5036.456030] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 5036.456100] MAI: soc_pcm_open() failed (-19) [ 5036.460070] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 5036.460142] MAI: soc_pcm_open() failed (-19) [ 5036.460498] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 5036.460540] MAI: soc_pcm_open() failed (-19) [ 5036.460862] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19 [ 5036.460902] MAI: soc_pcm_open() failed (-19) [ 5040.945571] rfkill: input handler disabled [ 5043.473504] usb 1-1.3: USB disconnect, device number 3 [ 5043.473532] usb 1-1.3.1: USB disconnect, device number 4 [ 5043.473544] usb 1-XXX.XXX.XXX.XXX: USB disconnect, device number 6 [ 5043.476426] usb 1-XXX.XXX.XXX.XXX: USB disconnect, device number 8 [ 5043.551029] usb 1-1.3.2: USB disconnect, device number 5 [ 5043.871642] usb 1-1.3.3: USB disconnect, device number 7 [ 5123.327452] usb 2-1: USB disconnect, device number 6 [ 5125.431350] usb 2-1: new SuperSpeed USB device number 7 using xhci_hcd [ 5125.453090] usb 2-1: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 5125.453120] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 5125.453134] usb 2-1: Product: Wireless [ 5125.453147] usb 2-1: Manufacturer: MediaTek Inc. [ 5125.453158] usb 2-1: SerialNumber: ... [ 5927.257921] usb 2-1: USB disconnect, device number 7 [ 6056.687986] usb 2-1: new SuperSpeed USB device number 8 using xhci_hcd [ 6056.713792] usb 2-1: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 6056.713822] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 6056.713837] usb 2-1: Product: Wireless [ 6056.713849] usb 2-1: Manufacturer: MediaTek Inc. [ 6056.713860] usb 2-1: SerialNumber: ...


Hardware for Linux and BSD

GitHub