[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 5.8.0-59-generic (XXX@XXX) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #66~20.04.1-Ubuntu SMP Thu Jun 17 11:14:10 UTC 2021 (Ubuntu 5.8.0-59.66~20.04.1-generic 5.8.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-59-generic root=UUID=HASH_6F3-B0F3-B1E0-260C-66A934EB4F1E ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c45d4fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c45d5000-0x00000000c45dbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c45dc000-0x00000000c4a28fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c4a29000-0x00000000c4ea9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c4eaa000-0x00000000d4731fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d4732000-0x00000000d47c3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d47c4000-0x00000000d47e6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d47e7000-0x00000000d54f9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d54fa000-0x00000000d5ffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d5fff000-0x00000000d5ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO ThinkServer TS140/ThinkServer TS140, BIOS FBKT70AUS 12/27/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.371 MHz processor [ 0.000655] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000657] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000662] last_pfn = 0x11ee00 max_arch_pfn = 0x400000000 [ 0.000665] MTRR default type: uncachable [ 0.000665] MTRR fixed ranges enabled: [ 0.000666] 00000-9FFFF write-back [ 0.000667] A0000-BFFFF uncachable [ 0.000667] C0000-CFFFF write-protect [ 0.000668] D0000-E7FFF uncachable [ 0.000668] E8000-FFFFF write-protect [ 0.000669] MTRR variable ranges enabled: [ 0.000670] 0 base 0000000000 mask 7F00000000 write-back [ 0.000671] 1 base 0100000000 mask 7FE0000000 write-back [ 0.000671] 2 base 00E0000000 mask 7FE0000000 uncachable [ 0.000672] 3 base 00D8000000 mask 7FF8000000 uncachable [ 0.000672] 4 base 00D7000000 mask 7FFF000000 uncachable [ 0.000673] 5 base 011F000000 mask 7FFF000000 uncachable [ 0.000673] 6 base 011EE00000 mask 7FFFE00000 uncachable [ 0.000674] 7 disabled [ 0.000674] 8 disabled [ 0.000675] 9 disabled [ 0.000960] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001077] total RAM covered: 3934M [ 0.001230] Found optimal setting for mtrr clean up [ 0.001230] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G [ 0.001473] e820: update [mem 0xd7000000-0xffffffff] usable ==> reserved [ 0.001476] last_pfn = 0xd6000 max_arch_pfn = 0x400000000 [ 0.007039] found SMP MP-table at [mem 0x000fcd30-0x000fcd3f] [ 0.015845] check: Scanning 1 areas for low memory corruption [ 0.015848] Using GB pages for direct mapping [ 0.016287] RAMDISK: [mem 0x318cb000-0x34c5cfff] [ 0.016291] ACPI: Early table checksum verification disabled [ 0.016294] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO) [ 0.016297] ACPI: XSDT 0x00000000D47CB098 0000B4 (v01 LENOVO TC-FB 00001460 AMI 00010013) [ 0.016301] ACPI: FACP 0x00000000D47E1E78 00010C (v05 LENOVO TC-FB 00001460 AMI 00010013) [ 0.016305] ACPI: DSDT 0x00000000D47CB1E0 016C91 (v02 LENOVO TC-FB 00001460 INTL 20120711) [ 0.016307] ACPI: FACS 0x00000000D54F8080 000040 [ 0.016309] ACPI: APIC 0x00000000D47E1F88 000072 (v03 LENOVO TC-FB 00001460 AMI 00010013) [ 0.016310] ACPI: FPDT 0x00000000D47E2000 000044 (v01 LENOVO TC-FB 00001460 AMI 00010013) [ 0.016312] ACPI: TCPA 0x00000000D47E2048 000032 (v02 LENOVO TC-FB 00001460 MSFT 01000013) [ 0.016314] ACPI: LPIT 0x00000000D47E2080 00005C (v01 LENOVO TC-FB 00001460 AMI. 00000005) [ 0.016316] ACPI: SSDT 0x00000000D47E20E0 000539 (v01 LENOVO TC-FB 00001460 INTL 20120711) [ 0.016318] ACPI: SSDT 0x00000000D47E2620 000AD8 (v01 LENOVO TC-FB 00001460 INTL 20120711) [ 0.016320] ACPI: MCFG 0x00000000D47E30F8 00003C (v01 LENOVO TC-FB 00001460 MSFT 00000097) [ 0.016322] ACPI: HPET 0x00000000D47E3138 000038 (v01 LENOVO TC-FB 00001460 AMI. 00000005) [ 0.016324] ACPI: SSDT 0x00000000D47E3170 00036D (v01 LENOVO TC-FB 00001460 INTL 20120711) [ 0.016326] ACPI: SSDT 0x00000000D47E34E0 0034E1 (v01 LENOVO TC-FB 00001460 INTL 20091112) [ 0.016328] ACPI: ASF! 0x00000000D47E69C8 0000A5 (v32 LENOVO TC-FB 00001460 TFSM 000F4240) [ 0.016329] ACPI: BGRT 0x00000000D47E6A70 000038 (v00 LENOVO TC-FB 00001460 AMI 00010013) [ 0.016331] ACPI: DMAR 0x00000000D47E6AA8 0000B8 (v01 LENOVO TC-FB 00001460 INTL 00000001) [ 0.016333] ACPI: EINJ 0x00000000D47E6B60 000130 (v01 LENOVO TC-FB 00001460 00000000) [ 0.016335] ACPI: ERST 0x00000000D47E6C90 000230 (v01 LENOVO TC-FB 00001460 00000000) [ 0.016337] ACPI: HEST 0x00000000D47E6EC0 0000A8 (v01 LENOVO TC-FB 00001460 00000000) [ 0.016339] ACPI: BERT 0x00000000D47E6F68 000030 (v01 LENOVO TC-FB 00001460 00000000) [ 0.016341] ACPI: Reserving FACP table memory at [mem 0xd47e1e78-0xd47e1f83] [ 0.016341] ACPI: Reserving DSDT table memory at [mem 0xd47cb1e0-0xd47e1e70] [ 0.016342] ACPI: Reserving FACS table memory at [mem 0xd54f8080-0xd54f80bf] [ 0.016342] ACPI: Reserving APIC table memory at [mem 0xd47e1f88-0xd47e1ff9] [ 0.016343] ACPI: Reserving FPDT table memory at [mem 0xd47e2000-0xd47e2043] [ 0.016343] ACPI: Reserving TCPA table memory at [mem 0xd47e2048-0xd47e2079] [ 0.016344] ACPI: Reserving LPIT table memory at [mem 0xd47e2080-0xd47e20db] [ 0.016344] ACPI: Reserving SSDT table memory at [mem 0xd47e20e0-0xd47e2618] [ 0.016345] ACPI: Reserving SSDT table memory at [mem 0xd47e2620-0xd47e30f7] [ 0.016345] ACPI: Reserving MCFG table memory at [mem 0xd47e30f8-0xd47e3133] [ 0.016346] ACPI: Reserving HPET table memory at [mem 0xd47e3138-0xd47e316f] [ 0.016347] ACPI: Reserving SSDT table memory at [mem 0xd47e3170-0xd47e34dc] [ 0.016347] ACPI: Reserving SSDT table memory at [mem 0xd47e34e0-0xd47e69c0] [ 0.016348] ACPI: Reserving ASF! table memory at [mem 0xd47e69c8-0xd47e6a6c] [ 0.016348] ACPI: Reserving BGRT table memory at [mem 0xd47e6a70-0xd47e6aa7] [ 0.016349] ACPI: Reserving DMAR table memory at [mem 0xd47e6aa8-0xd47e6b5f] [ 0.016349] ACPI: Reserving EINJ table memory at [mem 0xd47e6b60-0xd47e6c8f] [ 0.016350] ACPI: Reserving ERST table memory at [mem 0xd47e6c90-0xd47e6ebf] [ 0.016350] ACPI: Reserving HEST table memory at [mem 0xd47e6ec0-0xd47e6f67] [ 0.016351] ACPI: Reserving BERT table memory at [mem 0xd47e6f68-0xd47e6f97] [ 0.016358] ACPI: Local APIC address 0xfee00000 [ 0.016428] No NUMA configuration found [ 0.016429] Faking a node at [mem 0x0000000000000000-0x000000011edfffff] [ 0.016437] NODE_DATA(0) allocated [mem 0x11edd6000-0x11edfffff] [ 0.016644] Zone ranges: [ 0.016644] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.016645] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.016646] Normal [mem 0x0000000100000000-0x000000011edfffff] [ 0.016646] Device empty [ 0.016647] Movable zone start for each node [ 0.016649] Early memory node ranges [ 0.016650] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.016651] node 0: [mem 0x0000000000100000-0x00000000c45d4fff] [ 0.016651] node 0: [mem 0x00000000c45dc000-0x00000000c4a28fff] [ 0.016652] node 0: [mem 0x00000000c4eaa000-0x00000000d4731fff] [ 0.016652] node 0: [mem 0x00000000d5fff000-0x00000000d5ffffff] [ 0.016653] node 0: [mem 0x0000000100000000-0x000000011edfffff] [ 0.016654] Initmem setup node 0 [mem 0x0000000000001000-0x000000011edfffff] [ 0.016655] On node 0 totalpages: 995399 [ 0.016655] DMA zone: 64 pages used for memmap [ 0.016656] DMA zone: 21 pages reserved [ 0.016656] DMA zone: 3996 pages, LIFO batch:0 [ 0.016867] DMA zone: 28772 pages in unavailable ranges [ 0.016867] DMA32 zone: 13515 pages used for memmap [ 0.016868] DMA32 zone: 864939 pages, LIFO batch:63 [ 0.027464] DMA32 zone: 15701 pages in unavailable ranges [ 0.027466] Normal zone: 1976 pages used for memmap [ 0.027467] Normal zone: 126464 pages, LIFO batch:31 [ 0.029183] Normal zone: 4608 pages in unavailable ranges [ 0.029192] Reserving Intel graphics memory at [mem 0xd7200000-0xdf1fffff] [ 0.029265] ACPI: PM-Timer IO Port: 0x1808 [ 0.029267] ACPI: Local APIC address 0xfee00000 [ 0.029273] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029283] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.029284] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029286] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.029287] ACPI: IRQ0 used by override. [ 0.029287] ACPI: IRQ9 used by override. [ 0.029289] Using ACPI (MADT) for SMP configuration information [ 0.029290] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.029294] TSC deadline timer available [ 0.029295] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.029310] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.029311] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.029312] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.029312] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.029313] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.029314] PM: hibernation: Registered nosave memory: [mem 0xc45d5000-0xc45dbfff] [ 0.029315] PM: hibernation: Registered nosave memory: [mem 0xc4a29000-0xc4ea9fff] [ 0.029316] PM: hibernation: Registered nosave memory: [mem 0xd4732000-0xd47c3fff] [ 0.029316] PM: hibernation: Registered nosave memory: [mem 0xd47c4000-0xd47e6fff] [ 0.029317] PM: hibernation: Registered nosave memory: [mem 0xd47e7000-0xd54f9fff] [ 0.029317] PM: hibernation: Registered nosave memory: [mem 0xd54fa000-0xd5ffefff] [ 0.029318] PM: hibernation: Registered nosave memory: [mem 0xd6000000-0xd6ffffff] [ 0.029318] PM: hibernation: Registered nosave memory: [mem 0xd7000000-0xdf1fffff] [ 0.029319] PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.029319] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.029320] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.029320] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.029320] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.029321] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.029321] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.029321] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.029322] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.029322] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.029322] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.029323] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.029325] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.029325] Booting paravirtualized kernel on bare hardware [ 0.029328] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.029333] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.029604] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288 [ 0.029609] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152 [ 0.029610] pcpu-alloc: [0] 0 1 2 3 [ 0.029632] Built 1 zonelists, mobility grouping on. Total pages: 979823 [ 0.029632] Policy zone: Normal [ 0.029633] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-59-generic root=UUID=HASH_6F3-B0F3-B1E0-260C-66A934EB4F1E ro quiet splash vt.handoff=7 [ 0.030080] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.030269] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.030303] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.050876] Memory: 3759212K/3981596K available (14339K kernel code, 2538K rwdata, 5456K rodata, 2648K init, 4912K bss, 222384K reserved, 0K cma-reserved) [ 0.050884] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.050987] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.050999] Kernel/User page tables isolation: enabled [ 0.051017] ftrace: allocating 46487 entries in 182 pages [ 0.064390] ftrace: allocated 182 pages with 5 groups [ 0.064493] rcu: Hierarchical RCU implementation. [ 0.064494] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.064494] Trampoline variant of Tasks RCU enabled. [ 0.064494] Rude variant of Tasks RCU enabled. [ 0.064495] Tracing variant of Tasks RCU enabled. [ 0.064495] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.064496] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.067079] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.067333] random: crng done (trusting CPU's manufacturer) [ 0.067350] spurious 8259A interrupt: IRQ7. [ 0.067358] vt handoff: transparent VT on vt#7 [ 0.067363] Console: colour dummy device 80x25 [ 0.067368] printk: console [tty0] enabled [ 0.067382] ACPI: Core revision 20200528 [ 0.067497] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.067509] APIC: Switch to symmetric I/O mode setup [ 0.067510] DMAR: Host address width 39 [ 0.067511] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.067514] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.067515] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.067517] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.067517] DMAR: RMRR base: 0x000000d5e70000 end: 0x000000d5e96fff [ 0.067518] DMAR: RMRR base: 0x000000d7000000 end: 0x000000df1fffff [ 0.067520] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.067520] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.067521] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.068088] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.068089] x2apic enabled [ 0.068095] Switched APIC routing to cluster x2apic. [ 0.068497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.087511] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e04239b8f6, max_idle_ns: 440795370232 ns [ 0.087515] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.74 BogoMIPS (lpj=12769484) [ 0.087517] pid_max: default: 32768 minimum: 301 [ 0.087538] LSM: Security Framework initializing [ 0.087545] Yama: becoming mindful. [ 0.087566] AppArmor: AppArmor initialized [ 0.087599] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.087611] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.087829] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.087840] process: using mwait in idle threads [ 0.087842] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.087843] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.087845] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.087846] Spectre V2 : Mitigation: Full generic retpoline [ 0.087846] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.087846] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.087848] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.087848] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.087851] SRBDS: Mitigation: Microcode [ 0.087851] MDS: Mitigation: Clear CPU buffers [ 0.088026] Freeing SMP alternatives memory: 40K [ 0.091185] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.091277] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.091290] ... version: 3 [ 0.091290] ... bit width: 48 [ 0.091291] ... generic registers: 8 [ 0.091291] ... value mask: 0000ffffffffffff [ 0.091292] ... max period: 00007fffffffffff [ 0.091292] ... fixed-purpose events: 3 [ 0.091293] ... event mask: 00000007000000ff [ 0.091320] rcu: Hierarchical SRCU implementation. [ 0.091513] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.091513] smp: Bringing up secondary CPUs ... [ 0.091513] x86: Booting SMP configuration: [ 0.091513] .... node #0, CPUs: #1 #2 #3 [ 0.093111] smp: Brought up 1 node, 4 CPUs [ 0.093111] smpboot: Max logical packages: 1 [ 0.093111] smpboot: Total of 4 processors activated (25538.96 BogoMIPS) [ 0.095604] devtmpfs: initialized [ 0.095604] x86/mm: Memory block size: 128MB [ 0.095804] PM: Registering ACPI NVS region [mem 0xc45d5000-0xc45dbfff] (28672 bytes) [ 0.095804] PM: Registering ACPI NVS region [mem 0xd47e7000-0xd54f9fff] (13709312 bytes) [ 0.095804] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.095804] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.095804] pinctrl core: initialized pinctrl subsystem [ 0.095804] PM: RTC time: 00:59:12, date: 2021-06-30 [ 0.095804] thermal_sys: Registered thermal governor 'fair_share' [ 0.095804] thermal_sys: Registered thermal governor 'bang_bang' [ 0.095804] thermal_sys: Registered thermal governor 'step_wise' [ 0.095804] thermal_sys: Registered thermal governor 'user_space' [ 0.095804] thermal_sys: Registered thermal governor 'power_allocator' [ 0.095804] NET: Registered protocol family 16 [ 0.095804] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.095829] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.095854] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.095863] EISA bus registered [ 0.095863] cpuidle: using governor ladder [ 0.095863] cpuidle: using governor menu [ 0.095863] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.095863] ACPI: bus type PCI registered [ 0.095863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.095863] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.095863] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.095863] PCI: Using configuration type 1 for base access [ 0.095863] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.095863] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.096568] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.096568] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.096568] ACPI: Added _OSI(Module Device) [ 0.096568] ACPI: Added _OSI(Processor Device) [ 0.096568] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.096568] ACPI: Added _OSI(Processor Aggregator Device) [ 0.096568] ACPI: Added _OSI(Linux-Dell-Video) [ 0.096568] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.096568] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.113873] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.115285] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.116137] ACPI: Dynamic OEM Table Load: [ 0.116142] ACPI: SSDT 0xFFFF88CCD9669000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.117043] ACPI: Dynamic OEM Table Load: [ 0.117046] ACPI: SSDT 0xFFFF88CCD96ED000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.117987] ACPI: Dynamic OEM Table Load: [ 0.117990] ACPI: SSDT 0xFFFF88CCD9647A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.120019] ACPI: Interpreter enabled [ 0.120041] ACPI: (supports S0 S5) [ 0.120042] ACPI: Using IOAPIC for interrupt routing [ 0.120091] HEST: Table parsing has been initialized. [ 0.120093] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.120634] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.130269] ACPI: Power Resource [FN00] (off) [ 0.130332] ACPI: Power Resource [FN01] (off) [ 0.130392] ACPI: Power Resource [FN02] (off) [ 0.130451] ACPI: Power Resource [FN03] (off) [ 0.130512] ACPI: Power Resource [FN04] (off) [ 0.131404] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.131408] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.132032] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.132033] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.132432] PCI host bridge to bus 0000:00 [ 0.132434] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.132435] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.132436] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.132436] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.132437] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.132437] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.132438] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.132439] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.132439] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.132440] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.132441] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.132448] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.132522] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000 [ 0.132530] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.132534] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.132536] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.132607] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.132614] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.132706] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.132724] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.132776] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.132842] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.132861] pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit] [ 0.132916] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.132975] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.132991] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.132998] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3e000-0xf7c3efff] [ 0.133109] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.133125] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.133132] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ 0.133139] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.133188] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.133255] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.133273] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff] [ 0.133347] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.133424] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.133441] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.133503] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.133569] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.133639] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.133759] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.133830] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.133948] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.133967] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ 0.134042] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.134114] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 [ 0.134269] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.134284] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.134290] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.134296] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.134302] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.134308] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.134314] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ 0.134343] pci 0000:00:1f.2: PME# supported from D3hot [ 0.134405] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.134421] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.134438] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 0.134558] acpiphp: Slot [1] registered [ 0.134562] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.134660] pci 0000:02:00.0: [1283:8893] type 01 class 0x060401 [ 0.135083] pci 0000:02:00.0: supports D1 D2 [ 0.135083] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.135187] pci 0000:00:1c.3: PCI bridge to [bus 02-03] [ 0.135241] pci_bus 0000:03: extended config space not accessible [ 0.135337] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode) [ 0.136283] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.136342] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.136391] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.136439] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.136488] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.136536] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.136585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.136634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.137023] iommu: Default domain type: Translated [ 0.137023] SCSI subsystem initialized [ 0.137023] libata version 3.00 loaded. [ 0.137023] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.137023] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.137023] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.137023] vgaarb: loaded [ 0.137023] ACPI: bus type USB registered [ 0.137023] usbcore: registered new interface driver usbfs [ 0.137023] usbcore: registered new interface driver hub [ 0.137023] usbcore: registered new device driver usb [ 0.137023] pps_core: LinuxPPS API ver. 1 registered [ 0.137023] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.137023] PTP clock support registered [ 0.137023] EDAC MC: Ver: 3.0.0 [ 0.137023] NetLabel: Initializing [ 0.137023] NetLabel: domain hash size = 128 [ 0.137023] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.137023] NetLabel: unlabeled traffic allowed by default [ 0.137023] PCI: Using ACPI for IRQ routing [ 0.137023] PCI: pci_cache_line_size set to 64 bytes [ 0.137023] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.137023] e820: reserve RAM buffer [mem 0xc45d5000-0xc7ffffff] [ 0.137023] e820: reserve RAM buffer [mem 0xc4a29000-0xc7ffffff] [ 0.137023] e820: reserve RAM buffer [mem 0xd4732000-0xd7ffffff] [ 0.137023] e820: reserve RAM buffer [mem 0xd6000000-0xd7ffffff] [ 0.137023] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff] [ 0.139553] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.139555] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.141575] clocksource: Switched to clocksource tsc-early [ 0.150224] VFS: Disk quotas dquot_6.6.0 [ 0.150236] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.150322] AppArmor: AppArmor Filesystem Enabled [ 0.150345] pnp: PnP ACPI init [ 0.150606] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.150607] system 00:00: [io 0xffff] has been reserved [ 0.150608] system 00:00: [io 0xffff] has been reserved [ 0.150609] system 00:00: [io 0xffff] has been reserved [ 0.150609] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.150610] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.150611] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.150612] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.150613] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.150613] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.150618] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150634] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.150674] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.150676] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.150808] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.150808] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.150809] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.150811] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150860] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.150862] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.151036] pnp 00:05: [dma 0 disabled] [ 0.151065] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.151333] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.151738] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.151739] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.151740] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.151741] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.151742] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.151743] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.151744] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.151744] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.151745] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.151746] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.151747] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.151748] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.151751] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.152036] pnp: PnP ACPI: found 8 devices [ 0.157355] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.157394] NET: Registered protocol family 2 [ 0.157537] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.157566] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.157638] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.157666] TCP: Hash tables configured (established 32768 bind 32768) [ 0.157725] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.157736] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.157766] NET: Registered protocol family 1 [ 0.157770] NET: Registered protocol family 44 [ 0.157778] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.157787] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.157809] pci 0000:00:1c.3: PCI bridge to [bus 02-03] [ 0.157818] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.157819] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.157820] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.157821] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.157821] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.157822] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.157823] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.157824] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window] [ 0.157824] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window] [ 0.157825] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window] [ 0.157900] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.179601] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x670 took 21031 usecs [ 0.203593] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x670 took 23417 usecs [ 0.203606] PCI: CLS 64 bytes, default 64 [ 0.203638] Trying to unpack rootfs image as initramfs... [ 0.299821] Freeing initrd memory: 52808K [ 0.323538] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.323539] software IO TLB: mapped [mem 0xd0732000-0xd4732000] (64MB) [ 0.323710] check: Scanning for low memory corruption every 60 seconds [ 0.324049] Initialise system trusted keyrings [ 0.324060] Key type blacklist registered [ 0.324080] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.324996] zbud: loaded [ 0.325168] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.325268] fuse: init (API version 7.31) [ 0.325361] integrity: Platform Keyring initialized [ 0.333609] Key type asymmetric registered [ 0.333610] Asymmetric key parser 'x509' registered [ 0.333615] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.333635] io scheduler mq-deadline registered [ 0.333887] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 [ 0.334032] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27 [ 0.334098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.334136] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.334136] vesafb: scrolling: redraw [ 0.334137] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.334152] vesafb: framebuffer at 0xe0000000, mapped to 0x0000000008cf1c90, using 8128k, total 8128k [ 0.334177] fbcon: Deferring console take-over [ 0.334177] fb0: VESA VGA frame buffer device [ 0.334186] intel_idle: MWAIT substates: 0x42120 [ 0.334187] intel_idle: v0.5.1 model 0x3C [ 0.334349] intel_idle: Local APIC timer is reliable in all C-states [ 0.334466] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.334491] ACPI: Power Button [PWRB] [ 0.334517] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.334532] ACPI: Power Button [PWRF] [ 0.335089] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.335089] ACPI: Thermal Zone [TZ00] (28 C) [ 0.335287] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.335287] ACPI: Thermal Zone [TZ01] (30 C) [ 0.335334] ERST: Error Record Serialization Table (ERST) support is initialized. [ 0.335336] pstore: Registered erst as persistent store backend [ 0.335391] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 0.335480] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.356493] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.378237] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.378701] Linux agpgart interface v0.103 [ 0.383603] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) [ 0.435594] tpm tpm0: TPM is disabled/deactivated (0x6) [ 0.445503] loop: module loaded [ 0.445726] libphy: Fixed MDIO Bus: probed [ 0.445726] tun: Universal TUN/TAP device driver, 1.6 [ 0.445752] PPP generic driver version 2.4.2 [ 0.445803] VFIO - User Level meta-driver version: 0.3 [ 0.445879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.445881] ehci-pci: EHCI PCI platform driver [ 0.446014] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.446017] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.446026] ehci-pci 0000:00:1a.0: debug port 2 [ 0.449922] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.449932] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7c3c000 [ 0.463574] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.463618] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.463619] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.463620] usb usb1: Product: EHCI Host Controller [ 0.463620] usb usb1: Manufacturer: Linux 5.8.0-59-generic ehci_hcd [ 0.463621] usb usb1: SerialNumber: ... [ 0.463797] hub 1-0:1.0: USB hub found [ 0.463801] hub 1-0:1.0: 3 ports detected [ 0.464052] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.464055] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.464065] ehci-pci 0000:00:1d.0: debug port 2 [ 0.467959] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.467971] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ 0.483573] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.483625] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.483626] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.483627] usb usb2: Product: EHCI Host Controller [ 0.483628] usb usb2: Manufacturer: Linux 5.8.0-59-generic ehci_hcd [ 0.483628] usb usb2: SerialNumber: ... [ 0.483801] hub 2-0:1.0: USB hub found [ 0.483805] hub 2-0:1.0: 3 ports detected [ 0.483953] ehci-platform: EHCI generic platform driver [ 0.483967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.483969] ohci-pci: OHCI PCI platform driver [ 0.483977] ohci-platform: OHCI generic platform driver [ 0.483982] uhci_hcd: USB Universal Host Controller Interface driver [ 0.484014] i8042: PNP: No PS/2 controller found. [ 0.484208] mousedev: PS/2 mouse device common for all mice [ 0.484472] rtc_cmos 00:01: RTC can wake from S4 [ 0.484648] rtc_cmos 00:01: registered as rtc0 [ 0.484686] rtc_cmos 00:01: setting system clock to 2021-06-30T00:59:12 UTC (1625014752) [ 0.484698] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.484702] i2c /dev entries driver [ 0.484739] device-mapper: uevent: version 1.0.3 [ 0.484775] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: XXX@XXX [ 0.484793] platform eisa.0: Probing EISA bus 0 [ 0.484794] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.484795] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.484795] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.484796] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.484797] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.484797] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.484798] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.484799] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.484799] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.484800] platform eisa.0: EISA: Detected 0 cards [ 0.484804] intel_pstate: Intel P-state driver initializing [ 0.485055] ledtrig-cpu: registered to indicate activity on CPUs [ 0.485248] drop_monitor: Initializing network drop monitor service [ 0.485688] NET: Registered protocol family 10 [ 0.496625] Segment Routing with IPv6 [ 0.496641] NET: Registered protocol family 17 [ 0.496735] Key type dns_resolver registered [ 0.497063] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 0.497125] microcode: Microcode Update Driver: v2.2. [ 0.497129] IPI shorthand broadcast: enabled [ 0.497134] sched_clock: Marking stable (496868650, 254121)->(502898244, -5775473) [ 0.497208] registered taskstats version 1 [ 0.497215] Loading compiled-in X.509 certificates [ 0.497825] Loaded X.509 cert 'Build time autogenerated kernel key: 87ce1471730e969765637ec5317690a8c70fd42b' [ 0.498359] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.498870] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.498888] zswap: loaded using pool lzo/zbud [ 0.498943] Key type ._fscrypt registered [ 0.498943] Key type .fscrypt registered [ 0.498944] Key type fscrypt-provisioning registered [ 0.498998] pstore: Using crash dump compression: deflate [ 0.499009] Key type trusted registered [ 0.501122] Key type encrypted registered [ 0.501123] AppArmor: AppArmor sha1 policy hashing enabled [ 0.501138] ima: Allocated hash algorithm: sha1 [ 0.511606] ima: Error Communicating to TPM chip [ 0.519621] ima: Error Communicating to TPM chip [ 0.527622] ima: Error Communicating to TPM chip [ 0.535621] ima: Error Communicating to TPM chip [ 0.543639] ima: Error Communicating to TPM chip [ 0.551652] ima: Error Communicating to TPM chip [ 0.559633] ima: Error Communicating to TPM chip [ 0.567621] ima: Error Communicating to TPM chip [ 0.579673] ima: No architecture policies found [ 0.579729] evm: Initialising EVM extended attributes: [ 0.579732] evm: security.selinux [ 0.579734] evm: security.SMACK64 [ 0.579735] evm: security.SMACK64EXEC [ 0.579736] evm: security.SMACK64TRANSMUTE [ 0.579738] evm: security.SMACK64MMAP [ 0.579739] evm: security.apparmor [ 0.579740] evm: security.ima [ 0.579741] evm: security.capability [ 0.579744] evm: HMAC attrs: 0x1 [ 0.581133] PM: Magic number: 9:693:962 [ 0.581250] memory memory13: hash matches [ 0.581644] RAS: Correctable Errors collector initialized. [ 0.584476] Freeing unused decrypted memory: 2040K [ 0.585578] Freeing unused kernel image (initmem) memory: 2648K [ 0.585686] Write protecting the kernel read-only data: 22528k [ 0.586926] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 0.587341] Freeing unused kernel image (rodata/data gap) memory: 688K [ 0.764346] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.764349] x86/mm: Checking user space page tables [ 0.799542] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.802772] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.802792] Run /init as init process [ 0.802803] with arguments: [ 0.802803] /init [ 0.802804] splash [ 0.802804] with environment: [ 0.802805] HOME=/ [ 0.802805] TERM=linux [ 0.802805] BOOT_IMAGE=/boot/vmlinuz-5.8.0-59-generic [ 0.823524] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.872389] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.872393] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.873438] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.873442] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.873577] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 0.873578] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.873579] usb usb3: Product: xHCI Host Controller [ 0.873580] usb usb3: Manufacturer: Linux 5.8.0-59-generic xhci-hcd [ 0.873580] usb usb3: SerialNumber: ... [ 0.873755] hub 3-0:1.0: USB hub found [ 0.873773] hub 3-0:1.0: 15 ports detected [ 0.873829] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.873830] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.873850] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20200528/utaddress-204) [ 0.873855] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.873907] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204) [ 0.873910] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.873991] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20200528/utaddress-204) [ 0.873996] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200528/utaddress-204) [ 0.873998] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204) [ 0.874001] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.875909] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20200528/utaddress-204) [ 0.875912] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C1F (\GPBL) (20200528/utaddress-204) [ 0.875914] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20200528/utaddress-204) [ 0.875916] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20200528/utaddress-204) [ 0.875919] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.875920] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.876098] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.876239] ahci 0000:00:1f.2: version 3.0 [ 0.876558] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.876946] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x19 impl SATA mode [ 0.876948] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.877835] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.878307] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.880354] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.880356] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.880358] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.880385] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 [ 0.880386] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.880387] usb usb4: Product: xHCI Host Controller [ 0.880388] usb usb4: Manufacturer: Linux 5.8.0-59-generic xhci-hcd [ 0.880388] usb usb4: SerialNumber: ... [ 0.880453] hub 4-0:1.0: USB hub found [ 0.880463] hub 4-0:1.0: 6 ports detected [ 0.901391] scsi host0: ahci [ 0.901572] scsi host1: ahci [ 0.901645] scsi host2: ahci [ 0.901765] scsi host3: ahci [ 0.901829] scsi host4: ahci [ 0.901862] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 30 [ 0.901863] ata2: DUMMY [ 0.901863] ata3: DUMMY [ 0.901865] ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 30 [ 0.901867] ata5: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a300 irq 30 [ 0.956058] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.956063] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.956523] hub 1-1:1.0: USB hub found [ 0.956674] hub 1-1:1.0: 6 ports detected [ 0.965032] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 0.980371] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.980377] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.980751] hub 2-1:1.0: USB hub found [ 0.980935] hub 2-1:1.0: 8 ports detected [ 1.046114] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 1.046116] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.046161] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.054642] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.183888] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.183922] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.183954] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.185214] ata1.00: ATA-8: WD5003ABYX-88 LEN, WC32, max UDMA/133 [ 1.185220] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.186616] ata1.00: configured for UDMA/133 [ 1.186942] scsi 0:0:0:0: Direct-Access ATA WD5003ABYX-88 WC32 PQ: 0 ANSI: 5 [ 1.187348] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.187658] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.187677] sd 0:0:0:0: [sda] Write Protect is off [ 1.187682] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.187712] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.188179] ata4.00: ATAPI: PIONEER BD-RW BDR-208D, 1.10, max UDMA/100 [ 1.188323] ata5.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 1.188329] ata5.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 1.188333] ata5.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.190275] ata5.00: ATAPI: HL-DT-ST DVD-ROM DTA0N, DC01, max UDMA/33 [ 1.191946] ata4.00: configured for UDMA/100 [ 1.194328] ata5.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 1.194332] ata5.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 1.194334] ata5.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.197610] ata5.00: configured for UDMA/33 [ 1.202660] scsi 3:0:0:0: CD-ROM PIONEER BD-RW BDR-208D 1.10 PQ: 0 ANSI: 5 [ 1.229069] sda: sda1 sda2 < sda5 > [ 1.229602] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.263577] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 1.287773] sr 3:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray [ 1.287775] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.304254] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.304506] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.308091] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-ROM DTA0N DC01 PQ: 0 ANSI: 5 [ 1.347568] tsc: Refined TSC clocksource calibration: 3192.606 MHz [ 1.347574] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns [ 1.347598] clocksource: Switched to clocksource tsc [ 1.371052] sr 4:0:0:0: [sr1] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 1.384265] sr 4:0:0:0: Attached scsi CD-ROM sr1 [ 1.384440] sr 4:0:0:0: Attached scsi generic sg2 type 5 [ 1.416145] usb 3-4: New USB device found, idVendor=0bda, idProduct=a811, bcdDevice= 2.00 [ 1.416146] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.416147] usb 3-4: Product: 802.11ac WLAN Adapter [ 1.416148] usb 3-4: Manufacturer: Realtek [ 1.416149] usb 3-4: SerialNumber: ... [ 1.543557] usb 3-9: new low-speed USB device number 3 using xhci_hcd [ 1.695145] usb 3-9: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00 [ 1.695146] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.695147] usb 3-9: Product: USB Optical Mouse [ 1.695148] usb 3-9: Manufacturer: Logitech [ 1.823606] usb 3-10: new low-speed USB device number 4 using xhci_hcd [ 1.977235] usb 3-10: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00 [ 1.977238] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.977240] usb 3-10: Product: USB Keyboard [ 1.977242] usb 3-10: Manufacturer: Logitech [ 1.989323] hid: raw HID events driver (C) Jiri Kosina [ 1.998547] usbcore: registered new interface driver usbhid [ 1.998548] usbhid: USB HID core driver [ 2.003748] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:046D:C05A.0001/input/input2 [ 2.003946] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-9/input0 [ 2.004233] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:046D:C31C.0002/input/input3 [ 2.064071] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-10/input0 [ 2.064559] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:046D:C31C.0003/input/input4 [ 2.123949] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:046D:C31C.0003/input/input5 [ 2.124357] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-10/input1 [ 2.195859] fbcon: Taking over console [ 2.195906] Console: switching to colour frame buffer device 240x67 [ 2.259886] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 3.454180] systemd[1]: Inserted module 'autofs4' [ 3.577998] systemd[1]: systemd 245.4-4ubuntu3.7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 3.595831] systemd[1]: Detected architecture x86-64. [ 3.627027] systemd[1]: Set hostname to ... [ 6.228333] systemd[1]: Created slice system-modprobe.slice. [ 6.228561] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.228728] systemd[1]: Created slice User and Session Slice. [ 6.228786] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.228950] systemd[1]: Set up automount ... [ 6.228988] systemd[1]: Reached target User and Group Name Lookups. [ 6.229001] systemd[1]: Reached target Remote File Systems. [ 6.229010] systemd[1]: Reached target Slices. [ 6.229117] systemd[1]: Listening on Syslog Socket. [ 6.229197] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.229242] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.229405] systemd[1]: Listening on Journal Audit Socket. [ 6.229482] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.229571] systemd[1]: Listening on Journal Socket. [ 6.229658] systemd[1]: Listening on udev Control Socket. [ 6.229725] systemd[1]: Listening on udev Kernel Socket. [ 6.230514] systemd[1]: Mounting Huge Pages File System... [ 6.231297] systemd[1]: Mounting POSIX Message Queue File System... [ 6.232209] systemd[1]: Mounting Kernel Debug File System... [ 6.232993] systemd[1]: Mounting Kernel Trace File System... [ 6.234099] systemd[1]: Starting Journal Service... [ 6.234713] systemd[1]: Starting Set the console keyboard layout... [ 6.235708] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.236474] systemd[1]: Starting Load Kernel Module drm... [ 6.257171] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.257204] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.258157] systemd[1]: Starting Load Kernel Modules... [ 6.258761] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.259375] systemd[1]: Starting udev Coldplug all Devices... [ 6.260015] systemd[1]: Starting Uncomplicated firewall... [ 6.266923] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.343030] systemd[1]: Mounted Huge Pages File System. [ 6.343123] systemd[1]: Mounted POSIX Message Queue File System. [ 6.343195] systemd[1]: Mounted Kernel Debug File System. [ 6.343265] systemd[1]: Mounted Kernel Trace File System. [ 6.410854] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 6.412008] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.412615] systemd[1]: Activating swap /swapfile... [ 6.469231] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 6.469284] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.470001] systemd[1]: Starting Load/Save Random Seed... [ 6.470643] systemd[1]: Starting Create System Users... [ 6.470939] systemd[1]: XXX@XXX: Succeeded. [ 6.471196] systemd[1]: Finished Load Kernel Module drm. [ 6.471585] systemd[1]: Finished Uncomplicated firewall. [ 6.527937] lp: driver loaded but no devices found [ 6.530268] ppdev: user-space parallel port driver [ 6.563558] systemd[1]: Finished Load Kernel Modules. [ 6.564358] systemd[1]: Mounting FUSE Control File System... [ 6.565071] systemd[1]: Mounting Kernel Configuration File System... [ 6.565690] systemd[1]: Starting Apply Kernel Variables... [ 6.567203] systemd[1]: Mounted FUSE Control File System. [ 6.567294] systemd[1]: Mounted Kernel Configuration File System. [ 6.587223] systemd[1]: Started Journal Service. [ 6.701085] systemd-journald[314]: Received client request to flush runtime journal. [ 7.123587] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 11.943937] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED) [ 12.139071] at24 0-0051: supply vcc not found, using dummy regulator [ 12.139594] at24 0-0051: 256 byte spd EEPROM, read-only [ 12.245561] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 12.245562] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 12.245562] RAPL PMU: hw unit of domain package 2^-14 Joules [ 12.245563] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 12.245563] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 12.484587] cryptd: max_cpu_qlen set to 1000 [ 12.789046] AVX2 version of gcm_enc/dec engaged. [ 12.789047] AES CTR mode by8 optimization enabled [ 16.254019] intel_rapl_common: Found RAPL domain package [ 16.254021] intel_rapl_common: Found RAPL domain core [ 16.254022] intel_rapl_common: Found RAPL domain uncore [ 16.254022] intel_rapl_common: Found RAPL domain dram [ 16.254024] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 16.254027] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 16.654216] checking generic (e0000000 7f0000) vs hw (f7800000 400000) [ 16.654217] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 16.654218] fb0: switching to inteldrmfb from VESA VGA [ 16.654963] Console: switching to colour dummy device 80x25 [ 16.654991] i915 0000:00:02.0: vgaarb: deactivate vga console [ 16.655507] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 16.655826] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 16.674860] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0 [ 16.676807] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 16.677059] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 16.677221] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 17.090626] fbcon: i915drmfb (fb0) is primary device [ 17.090671] Console: switching to colour frame buffer device 240x67 [ 17.090692] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 17.229645] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7 [ 17.229682] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 [ 17.229711] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 17.229740] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 17.265883] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 17.265885] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 17.265886] snd_hda_codec_realtek hdaudioC1D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 17.265886] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 17.265887] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 17.265888] snd_hda_codec_realtek hdaudioC1D2: Mic=0x18 [ 17.265888] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 17.274811] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 17.274847] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 17.274877] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 38.835498] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 38.835500] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 38.835565] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 79.547502] rfkill: input handler disabled [ 9299.893084] usb 3-8: new high-speed USB device number 5 using xhci_hcd [ 9300.043433] usb 3-8: New USB device found, idVendor=067b, idProduct=2507, bcdDevice= 1.00 [ 9300.043440] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9300.043444] usb 3-8: Product: Mass Storage Device [ 9300.043447] usb 3-8: Manufacturer: Prolific Technology Inc. [ 9300.043449] usb 3-8: SerialNumber: ... [ 9300.101210] usb-storage 3-8:1.0: USB Mass Storage device detected [ 9300.101296] usb-storage 3-8:1.0: Quirks match for vid 067b pid 2507: 110 [ 9300.101356] scsi host5: usb-storage 3-8:1.0 [ 9300.101427] usbcore: registered new interface driver usb-storage [ 9300.116102] usbcore: registered new interface driver uas [ 9332.020859] usb 3-8: reset high-speed USB device number 5 using xhci_hcd [ 9337.384656] usb 3-8: device descriptor read/64, error -110 [ 9337.620608] usb 3-8: device descriptor read/64, error -71 [ 9337.856584] usb 3-8: reset high-speed USB device number 5 using xhci_hcd [ 9337.984598] usb 3-8: device descriptor read/64, error -71 [ 9338.220599] usb 3-8: device descriptor read/64, error -71 [ 9338.456599] usb 3-8: reset high-speed USB device number 5 using xhci_hcd [ 9338.456719] usb 3-8: Device not responding to setup address. [ 9338.664657] usb 3-8: Device not responding to setup address. [ 9338.872513] usb 3-8: device not accepting address 5, error -71 [ 9339.000510] usb 3-8: reset high-speed USB device number 5 using xhci_hcd [ 9339.000643] usb 3-8: Device not responding to setup address. [ 9339.208656] usb 3-8: Device not responding to setup address. [ 9339.416502] usb 3-8: device not accepting address 5, error -71 [ 9339.416537] usb 3-8: USB disconnect, device number 5 [ 9339.568572] usb 3-8: new high-speed USB device number 6 using xhci_hcd [ 9339.696629] usb 3-8: device descriptor read/64, error -71 [ 9339.932609] usb 3-8: device descriptor read/64, error -71 [ 9340.168555] usb 3-8: new high-speed USB device number 7 using xhci_hcd [ 9340.296629] usb 3-8: device descriptor read/64, error -71 [ 9340.532619] usb 3-8: device descriptor read/64, error -71 [ 9340.640607] usb usb3-port8: attempt power cycle [ 9341.292536] usb 3-8: new high-speed USB device number 8 using xhci_hcd [ 9341.292690] usb 3-8: Device not responding to setup address. [ 9341.500670] usb 3-8: Device not responding to setup address. [ 9341.708527] usb 3-8: device not accepting address 8, error -71 [ 9341.836497] usb 3-8: new high-speed USB device number 9 using xhci_hcd [ 9341.836652] usb 3-8: Device not responding to setup address. [ 9342.044675] usb 3-8: Device not responding to setup address. [ 9342.252544] usb 3-8: device not accepting address 9, error -71 [ 9342.252637] usb usb3-port8: unable to enumerate USB device [ 9381.779989] usb 3-7: new high-speed USB device number 10 using xhci_hcd [ 9381.930397] usb 3-7: New USB device found, idVendor=067b, idProduct=2507, bcdDevice= 1.00 [ 9381.930403] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9381.930406] usb 3-7: Product: Mass Storage Device [ 9381.930409] usb 3-7: Manufacturer: Prolific Technology Inc. [ 9381.930411] usb 3-7: SerialNumber: ... [ 9381.933887] usb-storage 3-7:1.0: USB Mass Storage device detected [ 9381.934011] usb-storage 3-7:1.0: Quirks match for vid 067b pid 2507: 110 [ 9381.934061] scsi host5: usb-storage 3-7:1.0 [ 9409.507643] usb 3-7: USB disconnect, device number 10 [ 9586.841210] usb 3-7: new high-speed USB device number 11 using xhci_hcd [ 9586.991539] usb 3-7: New USB device found, idVendor=067b, idProduct=2507, bcdDevice= 1.00 [ 9586.991544] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9586.991547] usb 3-7: Product: Mass Storage Device [ 9586.991549] usb 3-7: Manufacturer: Prolific Technology Inc. [ 9586.991551] usb 3-7: SerialNumber: ... [ 9586.993042] usb-storage 3-7:1.0: USB Mass Storage device detected [ 9586.994990] usb-storage 3-7:1.0: Quirks match for vid 067b pid 2507: 110 [ 9586.995113] scsi host5: usb-storage 3-7:1.0 [ 9598.117860] scsi 5:0:0:0: Direct-Access WDC WD16 00AABB-00PUA0 00.0 PQ: 0 ANSI: 0 [ 9598.118534] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 9598.119316] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 312581808 [ 9598.119327] sd 5:0:0:0: [sdb] 312581807 512-byte logical blocks: (160 GB/149 GiB) [ 9598.119856] sd 5:0:0:0: [sdb] Write Protect is off [ 9598.119860] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 9598.120287] sd 5:0:0:0: [sdb] No Caching mode page found [ 9598.120295] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 9598.141695] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 312581808 [ 9598.147590] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 312581808 [ 9598.148368] sd 5:0:0:0: [sdb] Attached SCSI disk [ 9629.032762] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 312581808 [ 9635.907636] usb 3-7: USB disconnect, device number 11 [ 9992.335788] usb 3-7: new high-speed USB device number 12 using xhci_hcd [ 9992.486146] usb 3-7: New USB device found, idVendor=067b, idProduct=2507, bcdDevice= 1.00 [ 9992.486152] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9992.486155] usb 3-7: Product: Mass Storage Device [ 9992.486158] usb 3-7: Manufacturer: Prolific Technology Inc. [ 9992.486161] usb 3-7: SerialNumber: ... [ 9992.487981] usb-storage 3-7:1.0: USB Mass Storage device detected [ 9992.488268] usb-storage 3-7:1.0: Quirks match for vid 067b pid 2507: 110 [ 9992.488341] scsi host5: usb-storage 3-7:1.0 [10024.491522] usb 3-7: reset high-speed USB device number 12 using xhci_hcd [10029.855257] usb 3-7: device descriptor read/64, error -110 [10030.091244] usb 3-7: device descriptor read/64, error -71 [10030.327235] usb 3-7: reset high-speed USB device number 12 using xhci_hcd [10030.455252] usb 3-7: device descriptor read/64, error -71 [10030.691237] usb 3-7: device descriptor read/64, error -71 [10030.927293] usb 3-7: reset high-speed USB device number 12 using xhci_hcd [10030.927475] usb 3-7: Device not responding to setup address. [10031.135356] usb 3-7: Device not responding to setup address. [10031.343201] usb 3-7: device not accepting address 12, error -71 [10031.471211] usb 3-7: reset high-speed USB device number 12 using xhci_hcd [10031.471344] usb 3-7: Device not responding to setup address. [10031.679346] usb 3-7: Device not responding to setup address. [10031.887203] usb 3-7: device not accepting address 12, error -71 [10031.887239] usb 3-7: USB disconnect, device number 12 [10032.039263] usb 3-7: new high-speed USB device number 13 using xhci_hcd [10032.167360] usb 3-7: device descriptor read/64, error -71 [10032.403335] usb 3-7: device descriptor read/64, error -71 [10032.639251] usb 3-7: new high-speed USB device number 14 using xhci_hcd [10032.768929] usb 3-7: device descriptor read/64, error -71 [10033.003319] usb 3-7: device descriptor read/64, error -71 [10033.111304] usb usb3-port7: attempt power cycle [10033.763244] usb 3-7: new high-speed USB device number 15 using xhci_hcd [10033.763400] usb 3-7: Device not responding to setup address. [10033.971376] usb 3-7: Device not responding to setup address. [10034.179228] usb 3-7: device not accepting address 15, error -71 [10034.307230] usb 3-7: new high-speed USB device number 16 using xhci_hcd [10034.307378] usb 3-7: Device not responding to setup address. [10034.515366] usb 3-7: Device not responding to setup address. [10034.723243] usb 3-7: device not accepting address 16, error -71 [10034.723336] usb usb3-port7: unable to enumerate USB device [10268.772101] usb 3-7: new high-speed USB device number 17 using xhci_hcd [10268.922538] usb 3-7: New USB device found, idVendor=067b, idProduct=2507, bcdDevice= 1.00 [10268.922544] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10268.922549] usb 3-7: Product: Mass Storage Device [10268.922552] usb 3-7: Manufacturer: Prolific Technology Inc. [10268.922554] usb 3-7: SerialNumber: ... [10268.927811] usb-storage 3-7:1.0: USB Mass Storage device detected [10268.928411] usb-storage 3-7:1.0: Quirks match for vid 067b pid 2507: 110 [10268.928566] scsi host5: usb-storage 3-7:1.0 [10273.163873] scsi 5:0:0:0: Direct-Access Maxtor 6 E040L0 NAR6 PQ: 0 ANSI: 0 [10273.164871] sd 5:0:0:0: Attached scsi generic sg3 type 0 [10273.165414] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 80293248 [10273.165427] sd 5:0:0:0: [sdb] 80293247 512-byte logical blocks: (41.1 GB/38.3 GiB) [10273.165973] sd 5:0:0:0: [sdb] Write Protect is off [10273.165977] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00 [10273.166480] sd 5:0:0:0: [sdb] No Caching mode page found [10273.166488] sd 5:0:0:0: [sdb] Assuming drive cache: write through [10273.180587] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 80293248 [10273.192877] sdb: sdb1 [10273.193671] sd 5:0:0:0: [sdb] Adjusting the sector count from its reported value: 80293248 [10273.194463] sd 5:0:0:0: [sdb] Attached SCSI disk [10297.563400] usb 3-7: USB disconnect, device number 17 [10716.222449] usb 3-7: new high-speed USB device number 18 using xhci_hcd [10716.377992] usb 3-7: New USB device found, idVendor=04fc, idProduct=0c25, bcdDevice= 1.03 [10716.377996] usb 3-7: New USB device strings: Mfr=2, Product=3, SerialNumber=... [10716.377998] usb 3-7: Product: USB to Serial-ATA bridge [10716.378000] usb 3-7: Manufacturer: Sunplus Technology Inc. [10716.378001] usb 3-7: SerialNumber: ... [10716.381092] usb-storage 3-7:1.0: USB Mass Storage device detected [10716.381489] scsi host5: usb-storage 3-7:1.0 [10717.411051] scsi 5:0:0:0: Direct-Access MAXTOR S TM3160215AS PQ: 0 ANSI: 2 [10717.411365] sd 5:0:0:0: Attached scsi generic sg3 type 0 [10717.411942] sd 5:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [10717.413825] sd 5:0:0:0: [sdb] Write Protect is off [10717.413827] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00 [10717.418140] sd 5:0:0:0: [sdb] No Caching mode page found [10717.418145] sd 5:0:0:0: [sdb] Assuming drive cache: write through [10717.454181] sdb: sdb1 [10717.463023] sd 5:0:0:0: [sdb] Attached SCSI disk [11102.538218] usb 3-7: USB disconnect, device number 18 [11252.922160] usb 3-7: new high-speed USB device number 19 using xhci_hcd [11253.073978] usb 3-7: New USB device found, idVendor=04fc, idProduct=0c25, bcdDevice= 1.03 [11253.073984] usb 3-7: New USB device strings: Mfr=2, Product=3, SerialNumber=... [11253.073987] usb 3-7: Product: USB to Serial-ATA bridge [11253.073990] usb 3-7: Manufacturer: Sunplus Technology Inc. [11253.073993] usb 3-7: SerialNumber: ... [11253.077833] usb-storage 3-7:1.0: USB Mass Storage device detected [11253.078300] scsi host5: usb-storage 3-7:1.0 [11254.105994] scsi 5:0:0:0: Direct-Access WDC WD16 00AAJS-00V4A0 PQ: 0 ANSI: 2 [11254.106877] sd 5:0:0:0: Attached scsi generic sg3 type 0 [11254.107410] sd 5:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [11254.109283] sd 5:0:0:0: [sdb] Write Protect is off [11254.109285] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00 [11254.112961] sd 5:0:0:0: [sdb] No Caching mode page found [11254.112965] sd 5:0:0:0: [sdb] Assuming drive cache: write through [11254.157356] sdb: sdb1 sdb2 [11254.165682] sd 5:0:0:0: [sdb] Attached SCSI disk [11522.131654] usb 3-7: USB disconnect, device number 19 [11751.613236] usb 3-7: new high-speed USB device number 20 using xhci_hcd [11751.764941] usb 3-7: New USB device found, idVendor=04fc, idProduct=0c25, bcdDevice= 1.03 [11751.764947] usb 3-7: New USB device strings: Mfr=2, Product=3, SerialNumber=... [11751.764950] usb 3-7: Product: USB to Serial-ATA bridge [11751.764953] usb 3-7: Manufacturer: Sunplus Technology Inc. [11751.764956] usb 3-7: SerialNumber: ... [11751.768661] usb-storage 3-7:1.0: USB Mass Storage device detected [11751.769119] scsi host5: usb-storage 3-7:1.0 [11752.789627] scsi 5:0:0:0: Direct-Access WDC WD50 00AAKX-001CA0 PQ: 0 ANSI: 2 [11752.790256] sd 5:0:0:0: Attached scsi generic sg3 type 0 [11752.791040] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [11752.792952] sd 5:0:0:0: [sdb] Write Protect is off [11752.792957] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00 [11752.794893] sd 5:0:0:0: [sdb] No Caching mode page found [11752.794902] sd 5:0:0:0: [sdb] Assuming drive cache: write through [11752.924214] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [11752.953054] sd 5:0:0:0: [sdb] Attached SCSI disk [11802.325151] usb 3-7: USB disconnect, device number 20 [11819.280514] usb 3-7: new high-speed USB device number 21 using xhci_hcd [11819.432251] usb 3-7: New USB device found, idVendor=04fc, idProduct=0c25, bcdDevice= 1.03 [11819.432257] usb 3-7: New USB device strings: Mfr=2, Product=3, SerialNumber=... [11819.432260] usb 3-7: Product: USB to Serial-ATA bridge [11819.432263] usb 3-7: Manufacturer: Sunplus Technology Inc. [11819.432265] usb 3-7: SerialNumber: ... [11819.435131] usb-storage 3-7:1.0: USB Mass Storage device detected [11819.435357] scsi host5: usb-storage 3-7:1.0 [11820.468637] scsi 5:0:0:0: Direct-Access WDC WD50 00AAKX-001CA0 PQ: 0 ANSI: 2 [11820.469373] sd 5:0:0:0: Attached scsi generic sg3 type 0 [11820.470454] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [11820.472364] sd 5:0:0:0: [sdb] Write Protect is off [11820.472412] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00 [11820.476223] sd 5:0:0:0: [sdb] No Caching mode page found [11820.476228] sd 5:0:0:0: [sdb] Assuming drive cache: write through [11820.568966] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [11820.574590] sd 5:0:0:0: [sdb] Attached SCSI disk [12031.650679] usb 3-7: USB disconnect, device number 21 [12118.373281] usb 3-7: new high-speed USB device number 22 using xhci_hcd [12118.524969] usb 3-7: New USB device found, idVendor=04fc, idProduct=0c25, bcdDevice= 1.03 [12118.524975] usb 3-7: New USB device strings: Mfr=2, Product=3, SerialNumber=... [12118.524978] usb 3-7: Product: USB to Serial-ATA bridge [12118.524981] usb 3-7: Manufacturer: Sunplus Technology Inc. [12118.524983] usb 3-7: SerialNumber: ... [12118.529740] usb-storage 3-7:1.0: USB Mass Storage device detected [12118.530219] scsi host5: usb-storage 3-7:1.0 [12119.537602] scsi 5:0:0:0: Direct-Access WDC WD50 00AAKX-001CA0 PQ: 0 ANSI: 2 [12119.538243] sd 5:0:0:0: Attached scsi generic sg3 type 0 [12119.538984] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [12119.540890] sd 5:0:0:0: [sdb] Write Protect is off [12119.540894] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00 [12119.542771] sd 5:0:0:0: [sdb] No Caching mode page found [12119.542773] sd 5:0:0:0: [sdb] Assuming drive cache: write through [12120.909017] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 > [12122.734674] sd 5:0:0:0: [sdb] Attached SCSI disk