[ 0.000000] microcode: microcode updated early to revision 0x1d, date = 2018-05-11 [ 0.000000] Linux version 5.0.0-32-lowlatency (XXX@XXX) (gcc version 8.3.0 (Ubuntu 8.3.0-6ubuntu1)) #34-Ubuntu SMP PREEMPT Wed Oct 2 02:46:56 UTC 2019 (Ubuntu 5.0.0-32.34-lowlatency 5.0.21) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-32-lowlatency root=UUID=HASH_736-6DB7-00B5-AF69-ADF669BD6584 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/P6T SE, BIOS 0908 09/21/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2806.651 MHz processor [ 0.003683] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.003685] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.003691] last_pfn = 0x340000 max_arch_pfn = 0x400000000 [ 0.003695] MTRR default type: uncachable [ 0.003696] MTRR fixed ranges enabled: [ 0.003697] 00000-9FFFF write-back [ 0.003698] A0000-BFFFF uncachable [ 0.003699] C0000-E3FFF write-protect [ 0.003700] E4000-EBFFF write-through [ 0.003701] EC000-FFFFF write-protect [ 0.003701] MTRR variable ranges enabled: [ 0.003703] 0 base 000000000 mask E00000000 write-back [ 0.003704] 1 base 200000000 mask F00000000 write-back [ 0.003705] 2 base 300000000 mask FC0000000 write-back [ 0.003706] 3 base 0C0000000 mask FC0000000 uncachable [ 0.003707] 4 base 0BF800000 mask FFF800000 uncachable [ 0.003708] 5 disabled [ 0.003708] 6 disabled [ 0.003709] 7 disabled [ 0.004359] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004498] total RAM covered: 12280M [ 0.004998] Found optimal setting for mtrr clean up [ 0.005000] gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G [ 0.005606] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.005610] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.015805] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.019088] check: Scanning 1 areas for low memory corruption [ 0.019094] BRK [0x1c4e01000, 0x1c4e01fff] PGTABLE [ 0.019097] BRK [0x1c4e02000, 0x1c4e02fff] PGTABLE [ 0.019098] BRK [0x1c4e03000, 0x1c4e03fff] PGTABLE [ 0.019141] BRK [0x1c4e04000, 0x1c4e04fff] PGTABLE [ 0.019144] BRK [0x1c4e05000, 0x1c4e05fff] PGTABLE [ 0.019238] BRK [0x1c4e06000, 0x1c4e06fff] PGTABLE [ 0.019259] BRK [0x1c4e07000, 0x1c4e07fff] PGTABLE [ 0.019293] BRK [0x1c4e08000, 0x1c4e08fff] PGTABLE [ 0.019524] RAMDISK: [mem 0x3310d000-0x3587dfff] [ 0.019534] ACPI: Early table checksum verification disabled [ 0.019640] ACPI: RSDP 0x00000000000FB150 000014 (v00 ACPIAM) [ 0.019643] ACPI: RSDT 0x00000000BF780000 000040 (v01 092110 RSDT1001 20100921 MSFT 00000097) [ 0.019648] ACPI: FACP 0x00000000BF780200 000084 (v01 092110 FACP1001 20100921 MSFT 00000097) [ 0.019655] ACPI: DSDT 0x00000000BF7804B0 00C387 (v01 A1279 A1279001 00000001 INTL 20060113) [ 0.019659] ACPI: FACS 0x00000000BF798000 000040 [ 0.019662] ACPI: APIC 0x00000000BF780390 0000D8 (v01 092110 APIC1001 20100921 MSFT 00000097) [ 0.019666] ACPI: MCFG 0x00000000BF780470 00003C (v01 092110 OEMMCFG 20100921 MSFT 00000097) [ 0.019670] ACPI: OEMB 0x00000000BF798040 000072 (v01 092110 OEMB1001 20100921 MSFT 00000097) [ 0.019673] ACPI: HPET 0x00000000BF78F4B0 000038 (v01 092110 OEMHPET 20100921 MSFT 00000097) [ 0.019677] ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 092110 OEMOSFR 20100921 MSFT 00000097) [ 0.019681] ACPI: SSDT 0x00000000BF799EE0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.019691] ACPI: Local APIC address 0xfee00000 [ 0.019802] No NUMA configuration found [ 0.019803] Faking a node at [mem 0x0000000000000000-0x000000033fffffff] [ 0.019815] NODE_DATA(0) allocated [mem 0x33ffcd000-0x33fff7fff] [ 0.020167] Zone ranges: [ 0.020168] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.020169] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.020171] Normal [mem 0x0000000100000000-0x000000033fffffff] [ 0.020172] Device empty [ 0.020173] Movable zone start for each node [ 0.020176] Early memory node ranges [ 0.020177] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.020177] node 0: [mem 0x0000000000100000-0x00000000bf77ffff] [ 0.020178] node 0: [mem 0x0000000100000000-0x000000033fffffff] [ 0.020226] Zeroed struct page in unavailable ranges: 2276 pages [ 0.020227] Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff] [ 0.020228] On node 0 totalpages: 3143452 [ 0.020230] DMA zone: 64 pages used for memmap [ 0.020230] DMA zone: 21 pages reserved [ 0.020231] DMA zone: 3996 pages, LIFO batch:0 [ 0.020366] DMA32 zone: 12190 pages used for memmap [ 0.020367] DMA32 zone: 780160 pages, LIFO batch:63 [ 0.047492] Normal zone: 36864 pages used for memmap [ 0.047494] Normal zone: 2359296 pages, LIFO batch:63 [ 0.124617] ACPI: PM-Timer IO Port: 0x808 [ 0.124621] ACPI: Local APIC address 0xfee00000 [ 0.124638] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.124644] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.124646] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.124648] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.124649] ACPI: IRQ0 used by override. [ 0.124651] ACPI: IRQ9 used by override. [ 0.124653] Using ACPI (MADT) for SMP configuration information [ 0.124655] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.124660] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.124673] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.124675] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.124676] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.124677] PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff] [ 0.124677] PM: Registered nosave memory: [mem 0x000e5000-0x000fffff] [ 0.124679] PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff] [ 0.124680] PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff] [ 0.124680] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff] [ 0.124681] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.124682] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.124682] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] [ 0.124683] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.124685] [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.124686] Booting paravirtualized kernel on bare hardware [ 0.124689] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.124698] random: get_random_bytes called from start_kernel+0x97/0x51d with crng_init=0 [ 0.124705] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.125158] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u262144 [ 0.125165] pcpu-alloc: s155648 r8192 d28672 u262144 alloc=1*2097152 [ 0.125166] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.125195] Built 1 zonelists, mobility grouping on. Total pages: 3094313 [ 0.125196] Policy zone: Normal [ 0.125197] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-32-lowlatency root=UUID=HASH_736-6DB7-00B5-AF69-ADF669BD6584 ro quiet splash vt.handoff=1 [ 0.129821] Calgary: detecting Calgary via BIOS EBDA area [ 0.129823] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.167267] Memory: 12234492K/12573808K available (14339K kernel code, 2343K rwdata, 4452K rodata, 2516K init, 5256K bss, 339316K reserved, 0K cma-reserved) [ 0.167453] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.167459] Kernel/User page tables isolation: enabled [ 0.167480] ftrace: allocating 41656 entries in 163 pages [ 0.190310] rcu: Preemptible hierarchical RCU implementation. [ 0.190312] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.190313] Tasks RCU enabled. [ 0.190314] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.190314] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.194594] NR_IRQS: 524544, nr_irqs: 960, preallocated irqs: 16 [ 0.194943] vt handoff: transparent VT on vt#1 [ 0.194951] Console: colour dummy device 80x25 [ 0.194955] printk: console [tty0] enabled [ 0.194974] ACPI: Core revision 20181213 [ 0.195150] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.195159] hpet clockevent registered [ 0.195163] APIC: Switch to symmetric I/O mode setup [ 0.195164] DMAR-IR: This system BIOS has enabled interrupt remapping [ 0.195164] on a chipset that contains an erratum making that [ 0.195164] feature unstable. To maintain system stability [ 0.195164] interrupt remapping is being disabled. Please [ 0.195164] contact your BIOS vendor for an update [ 0.195166] Switched APIC routing to physical flat. [ 0.195815] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.200163] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2874cb71e75, max_idle_ns: 440795208097 ns [ 0.200175] Calibrating delay loop (skipped), value calculated using timer frequency.. 5613.30 BogoMIPS (lpj=2806651) [ 0.200177] pid_max: default: 32768 minimum: 301 [ 0.200222] LSM: Security Framework initializing [ 0.200234] Yama: becoming mindful. [ 0.200259] AppArmor: AppArmor initialized [ 0.202779] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.204046] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.204102] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.204142] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.204407] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.204419] process: using mwait in idle threads [ 0.204422] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.204423] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.204424] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.204425] Spectre V2 : Mitigation: Full generic retpoline [ 0.204426] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.204426] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.204434] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.204435] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.204436] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.204462] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.204601] Freeing SMP alternatives memory: 36K [ 0.309258] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz (family: 0x6, model: 0x1a, stepping: 0x5) [ 0.315175] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.315182] core: CPU erratum AAJ80 worked around [ 0.315183] core: CPUID marked event: 'bus cycles' unavailable [ 0.315187] ... version: 3 [ 0.315187] ... bit width: 48 [ 0.315188] ... generic registers: 4 [ 0.315189] ... value mask: 0000ffffffffffff [ 0.315189] ... max period: 000000007fffffff [ 0.315190] ... fixed-purpose events: 3 [ 0.315191] ... event mask: 000000070000000f [ 0.317168] rcu: Hierarchical SRCU implementation. [ 0.322429] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.324172] smp: Bringing up secondary CPUs ... [ 0.334180] x86: Booting SMP configuration: [ 0.334181] .... node #0, CPUs: #1 #2 #3 #4 [ 0.369313] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.379178] #5 #6 #7 [ 0.402209] smp: Brought up 1 node, 8 CPUs [ 0.402209] smpboot: Max logical packages: 2 [ 0.402209] smpboot: Total of 8 processors activated (44906.41 BogoMIPS) [ 0.404410] devtmpfs: initialized [ 0.404410] x86/mm: Memory block size: 128MB [ 0.405492] PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes) [ 0.405492] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.405492] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.405492] pinctrl core: initialized pinctrl subsystem [ 0.405492] RTC time: 00:54:41, date: 2019-10-21 [ 0.405492] NET: Registered protocol family 16 [ 0.405492] EISA bus registered [ 0.406173] cpuidle: using governor ladder [ 0.406178] cpuidle: using governor menu [ 0.406200] ACPI: bus type PCI registered [ 0.406201] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.406265] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.406267] PCI: not using MMCONFIG [ 0.406268] PCI: Using configuration type 1 for base access [ 0.407205] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.407239] ACPI: Added _OSI(Module Device) [ 0.407240] ACPI: Added _OSI(Processor Device) [ 0.407240] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.407241] ACPI: Added _OSI(Processor Aggregator Device) [ 0.407242] ACPI: Added _OSI(Linux-Dell-Video) [ 0.407243] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.407244] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.418344] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.433916] ACPI: Dynamic OEM Table Load: [ 0.433926] ACPI: SSDT 0xFFFF97D0335D8000 001E1C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.435933] ACPI: Interpreter enabled [ 0.435954] ACPI: (supports S0 S1 S3 S4 S5) [ 0.435955] ACPI: Using IOAPIC for interrupt routing [ 0.435990] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.437542] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.437561] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.437814] ACPI: Enabled 13 GPEs in block 00 to 3F [ 0.447214] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.447219] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.447223] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.447606] PCI host bridge to bus 0000:00 [ 0.447608] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.447609] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.447610] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.447611] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.447612] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] [ 0.447614] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window] [ 0.447615] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.447625] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000 [ 0.447653] pci 0000:00:00.0: enabling Extended Tags [ 0.447686] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.447789] pci 0000:00:01.0: [8086:3408] type 01 class 0x060400 [ 0.447812] pci 0000:00:01.0: enabling Extended Tags [ 0.447846] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.447953] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400 [ 0.447979] pci 0000:00:03.0: enabling Extended Tags [ 0.448013] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.448120] pci 0000:00:07.0: [8086:340e] type 01 class 0x060400 [ 0.448146] pci 0000:00:07.0: enabling Extended Tags [ 0.448188] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.448302] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000 [ 0.448435] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000 [ 0.448563] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000 [ 0.448687] pci 0000:00:14.3: [8086:3438] type 00 class 0x080000 [ 0.448802] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 [ 0.448841] pci 0000:00:1a.0: reg 0x20: [io 0x9800-0x981f] [ 0.448964] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 [ 0.449003] pci 0000:00:1a.1: reg 0x20: [io 0x9880-0x989f] [ 0.449126] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 [ 0.449173] pci 0000:00:1a.2: reg 0x20: [io 0x9c00-0x9c1f] [ 0.449303] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 [ 0.449323] pci 0000:00:1a.7: reg 0x10: [mem 0xf9fff000-0xf9fff3ff] [ 0.449398] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.449505] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300 [ 0.449524] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ff8000-0xf9ffbfff 64bit] [ 0.449591] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.449686] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 [ 0.449757] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.449863] pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400 [ 0.449935] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.450044] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400 [ 0.450116] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.450232] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400 [ 0.450304] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.450413] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 [ 0.450454] pci 0000:00:1d.0: reg 0x20: [io 0x9080-0x909f] [ 0.450580] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 [ 0.450620] pci 0000:00:1d.1: reg 0x20: [io 0x9400-0x941f] [ 0.450742] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 [ 0.450781] pci 0000:00:1d.2: reg 0x20: [io 0x9480-0x949f] [ 0.450912] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 [ 0.450931] pci 0000:00:1d.7: reg 0x10: [mem 0xf9ffe000-0xf9ffe3ff] [ 0.451007] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.451106] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.451246] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 [ 0.451322] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.451325] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 0.451328] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.451331] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.451449] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f [ 0.451464] pci 0000:00:1f.2: reg 0x10: [io 0x8000-0x8007] [ 0.451470] pci 0000:00:1f.2: reg 0x14: [io 0x7c00-0x7c03] [ 0.451476] pci 0000:00:1f.2: reg 0x18: [io 0x7880-0x7887] [ 0.451483] pci 0000:00:1f.2: reg 0x1c: [io 0x7800-0x7803] [ 0.451489] pci 0000:00:1f.2: reg 0x20: [io 0x7480-0x748f] [ 0.451495] pci 0000:00:1f.2: reg 0x24: [io 0x7400-0x740f] [ 0.451615] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 [ 0.451631] pci 0000:00:1f.3: reg 0x10: [mem 0xf9ffd000-0xf9ffd0ff 64bit] [ 0.451649] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.451748] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185 [ 0.451763] pci 0000:00:1f.5: reg 0x10: [io 0x9000-0x9007] [ 0.451769] pci 0000:00:1f.5: reg 0x14: [io 0x8c00-0x8c03] [ 0.451775] pci 0000:00:1f.5: reg 0x18: [io 0x8880-0x8887] [ 0.451782] pci 0000:00:1f.5: reg 0x1c: [io 0x8800-0x8803] [ 0.451788] pci 0000:00:1f.5: reg 0x20: [io 0x8480-0x848f] [ 0.451794] pci 0000:00:1f.5: reg 0x24: [io 0x8400-0x840f] [ 0.451936] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.451979] pci 0000:02:00.0: [10de:1c82] type 00 class 0x030000 [ 0.451999] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.452009] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.452019] pci 0000:02:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.452026] pci 0000:02:00.0: reg 0x24: [io 0xac00-0xac7f] [ 0.452032] pci 0000:02:00.0: reg 0x30: [mem 0xfba00000-0xfba7ffff pref] [ 0.452114] pci 0000:02:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:03.0 (capable of 126.016 Gb/s with 8 GT/s x16 link) [ 0.452151] pci 0000:02:00.1: [10de:0fb9] type 00 class 0x040300 [ 0.452172] pci 0000:02:00.1: reg 0x10: [mem 0xfbafc000-0xfbafffff] [ 0.455188] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.455192] pci 0000:00:03.0: bridge window [io 0xa000-0xafff] [ 0.455196] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbafffff] [ 0.455201] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.455275] pci 0000:03:00.0: [1095:3132] type 00 class 0x010400 [ 0.455325] pci 0000:03:00.0: reg 0x10: [mem 0xfbbffc00-0xfbbffc7f 64bit] [ 0.455350] pci 0000:03:00.0: reg 0x18: [mem 0xfbbf8000-0xfbbfbfff 64bit] [ 0.455367] pci 0000:03:00.0: reg 0x20: [io 0xbc00-0xbc7f] [ 0.455399] pci 0000:03:00.0: reg 0x30: [mem 0xfbb00000-0xfbb7ffff pref] [ 0.455500] pci 0000:03:00.0: supports D1 D2 [ 0.455583] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.455592] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.455594] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff] [ 0.455597] pci 0000:00:07.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.455597] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.455597] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.455597] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 [ 0.455597] pci 0000:06:00.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.455597] pci 0000:06:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit] [ 0.455597] pci 0000:06:00.0: reg 0x20: [mem 0xf8ef0000-0xf8efffff 64bit pref] [ 0.455597] pci 0000:06:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref] [ 0.455597] pci 0000:06:00.0: supports D1 D2 [ 0.455597] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.455597] pci 0000:00:1c.2: ASPM: current common clock configuration is broken, reconfiguring [ 0.458186] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.458190] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.458194] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.458200] pci 0000:00:1c.2: bridge window [mem 0xf8e00000-0xf8efffff 64bit pref] [ 0.458266] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 [ 0.458296] pci 0000:05:00.0: reg 0x10: [mem 0xfbdff000-0xfbdff7ff 64bit] [ 0.458307] pci 0000:05:00.0: reg 0x18: [io 0xd800-0xd8ff] [ 0.458409] pci 0000:05:00.0: supports D2 [ 0.458410] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.461184] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.461188] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.461192] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.461286] pci 0000:04:00.0: [197b:2363] type 00 class 0x010185 [ 0.461379] pci 0000:04:00.0: reg 0x24: [mem 0xfbcfe000-0xfbcfffff] [ 0.461391] pci 0000:04:00.0: reg 0x30: [mem 0xfbce0000-0xfbceffff pref] [ 0.461451] pci 0000:04:00.0: PME# supported from D3hot [ 0.461532] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185 [ 0.461556] pci 0000:04:00.1: reg 0x10: [io 0xcc00-0xcc07] [ 0.461565] pci 0000:04:00.1: reg 0x14: [io 0xc880-0xc883] [ 0.461574] pci 0000:04:00.1: reg 0x18: [io 0xc800-0xc807] [ 0.461583] pci 0000:04:00.1: reg 0x1c: [io 0xc480-0xc483] [ 0.461592] pci 0000:04:00.1: reg 0x20: [io 0xc400-0xc40f] [ 0.461592] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.461592] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.461592] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.461592] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.461592] pci_bus 0000:08: extended config space not accessible [ 0.461592] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode) [ 0.461592] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.461592] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.461592] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.461592] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.461592] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode) [ 0.461592] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode) [ 0.462124] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.462208] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.462279] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.462351] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.462423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.462495] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.462567] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.462639] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.463337] SCSI subsystem initialized [ 0.463354] libata version 3.00 loaded. [ 0.463354] pci 0000:02:00.0: vgaarb: setting as boot VGA device [ 0.463354] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.463354] pci 0000:02:00.0: vgaarb: bridge control possible [ 0.463354] vgaarb: loaded [ 0.463354] ACPI: bus type USB registered [ 0.463354] usbcore: registered new interface driver usbfs [ 0.463354] usbcore: registered new interface driver hub [ 0.463354] usbcore: registered new device driver usb [ 0.463354] pps_core: LinuxPPS API ver. 1 registered [ 0.463354] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.463354] PTP clock support registered [ 0.463354] EDAC MC: Ver: 3.0.0 [ 0.463354] PCI: Using ACPI for IRQ routing [ 0.468440] PCI: Discovered peer bus ff [ 0.468441] PCI: root bus ff: using default resources [ 0.468441] PCI: Probing PCI hardware (bus ff) [ 0.468461] PCI host bridge to bus 0000:ff [ 0.468463] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.468464] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.468465] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.468467] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.468471] pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000 [ 0.468509] pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000 [ 0.468545] pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000 [ 0.468580] pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000 [ 0.468615] pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000 [ 0.468652] pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000 [ 0.468686] pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000 [ 0.468720] pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000 [ 0.468755] pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000 [ 0.468789] pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000 [ 0.468822] pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000 [ 0.468856] pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000 [ 0.468890] pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000 [ 0.468924] pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000 [ 0.468957] pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000 [ 0.468994] pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000 [ 0.469028] pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000 [ 0.469061] pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000 [ 0.469095] pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000 [ 0.469138] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff [ 0.469140] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) [ 0.469145] PCI: pci_cache_line_size set to 64 bytes [ 0.469232] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.469234] e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff] [ 0.469318] NetLabel: Initializing [ 0.469319] NetLabel: domain hash size = 128 [ 0.469319] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.469333] NetLabel: unlabeled traffic allowed by default [ 0.470776] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.470779] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.470781] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.473188] clocksource: Switched to clocksource tsc-early [ 0.486921] VFS: Disk quotas dquot_6.6.0 [ 0.486942] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.487045] AppArmor: AppArmor Filesystem Enabled [ 0.487070] pnp: PnP ACPI init [ 0.487156] system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved [ 0.487157] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.487159] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.487160] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.487161] system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 0.487163] system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved [ 0.487167] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.487241] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.487494] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.487499] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.487768] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.487770] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.487771] system 00:03: [io 0x0500-0x057f] could not be reserved [ 0.487773] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.487774] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.487776] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.487780] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.487923] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.487927] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.488089] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.488090] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.488094] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.488236] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.488240] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.488481] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.488482] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.488484] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.488485] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.488486] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.488490] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.488665] pnp: PnP ACPI: found 8 devices [ 0.494448] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.494473] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.494475] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 400000 add_align 100000 [ 0.494486] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 0.494493] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.494507] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff] [ 0.494511] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.494514] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.494516] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.494518] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.494526] pci 0000:00:03.0: PCI bridge to [bus 02] [ 0.494527] pci 0000:00:03.0: bridge window [io 0xa000-0xafff] [ 0.494530] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbafffff] [ 0.494532] pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.494536] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.494538] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff] [ 0.494541] pci 0000:00:07.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.494546] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.494547] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.494556] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff] [ 0.494559] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.494563] pci 0000:00:1c.2: PCI bridge to [bus 06] [ 0.494565] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.494568] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.494571] pci 0000:00:1c.2: bridge window [mem 0xf8e00000-0xf8efffff 64bit pref] [ 0.494575] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.494577] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.494580] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.494583] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.494587] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.494589] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.494592] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.494595] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.494599] pci 0000:00:1e.0: PCI bridge to [bus 08] [ 0.494608] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.494609] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.494610] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.494611] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.494612] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window] [ 0.494614] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 0.494615] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.494616] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfbafffff] [ 0.494617] pci_bus 0000:02: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.494618] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.494619] pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.494621] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.494622] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff] [ 0.494623] pci_bus 0000:07: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref] [ 0.494624] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.494625] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.494626] pci_bus 0000:06: resource 2 [mem 0xf8e00000-0xf8efffff 64bit pref] [ 0.494627] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.494628] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.494629] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.494630] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.494631] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.494632] pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 0.494634] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window] [ 0.494635] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window] [ 0.494636] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.494637] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.494638] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff window] [ 0.494639] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff window] [ 0.494707] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff] [ 0.494708] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff] [ 0.494738] NET: Registered protocol family 2 [ 0.494902] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 0.494957] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.495152] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.495267] TCP: Hash tables configured (established 131072 bind 65536) [ 0.495315] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.495362] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.495474] NET: Registered protocol family 1 [ 0.495478] NET: Registered protocol family 44 [ 0.497325] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.497336] pci 0000:02:00.1: Linked as a consumer to 0000:02:00.0 [ 0.497377] pci 0000:04:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.497381] pci 0000:04:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.497411] PCI: CLS 256 bytes, default 64 [ 0.497445] Unpacking initramfs... [ 1.067171] Freeing initrd memory: 40388K [ 1.067174] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.067175] software IO TLB: mapped [mem 0xbb780000-0xbf780000] (64MB) [ 1.067357] check: Scanning for low memory corruption every 60 seconds [ 1.069144] Initialise system trusted keyrings [ 1.069152] Key type blacklist registered [ 1.069179] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 1.070481] zbud: loaded [ 1.070886] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.071071] fuse init (API version 7.28) [ 1.112426] Key type asymmetric registered [ 1.112428] Asymmetric key parser 'x509' registered [ 1.112438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.112472] io scheduler mq-deadline registered [ 1.112713] pcieport 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.113355] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.113412] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 1.113413] vesafb: scrolling: redraw [ 1.113414] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.113425] vesafb: framebuffer at 0xcf000000, mapped to 0x(____ptrval____), using 8128k, total 8128k [ 1.113511] Console: switching to colour frame buffer device 240x67 [ 1.113559] fb0: VESA VGA frame buffer device [ 1.113571] intel_idle: MWAIT substates: 0x1120 [ 1.113572] intel_idle: v0.4.1 model 0x1A [ 1.113843] intel_idle: lapic_timer_reliable_states 0x2 [ 1.113940] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.113947] ACPI: Power Button [PWRB] [ 1.113979] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.114742] ACPI: Power Button [PWRF] [ 1.115396] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.117547] Linux agpgart interface v0.103 [ 1.121579] loop: module loaded [ 1.121785] ata_piix 0000:00:1f.2: version 2.13 [ 1.121918] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.123288] scsi host0: ata_piix [ 1.123497] scsi host1: ata_piix [ 1.123543] ata1: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20 [ 1.123546] ata2: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20 [ 1.123752] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.125378] scsi host2: ata_piix [ 1.125835] scsi host3: ata_piix [ 1.125906] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20 [ 1.125909] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20 [ 1.126016] libphy: Fixed MDIO Bus: probed [ 1.126017] tun: Universal TUN/TAP device driver, 1.6 [ 1.126048] PPP generic driver version 2.4.2 [ 1.126091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.126094] ehci-pci: EHCI PCI platform driver [ 1.126241] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.126247] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.126257] ehci-pci 0000:00:1a.7: debug port 1 [ 1.130163] ehci-pci 0000:00:1a.7: cache line size of 256 is not supported [ 1.130370] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9fff000 [ 1.136784] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.136840] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 1.136845] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.136846] usb usb1: Product: EHCI Host Controller [ 1.136847] usb usb1: Manufacturer: Linux 5.0.0-32-lowlatency ehci_hcd [ 1.136848] usb usb1: SerialNumber: ... [ 1.136974] hub 1-0:1.0: USB hub found [ 1.136984] hub 1-0:1.0: 6 ports detected [ 1.137277] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.137281] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.137290] ehci-pci 0000:00:1d.7: debug port 1 [ 1.141178] ehci-pci 0000:00:1d.7: cache line size of 256 is not supported [ 1.141383] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9ffe000 [ 1.147784] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.147846] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 [ 1.147848] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.147849] usb usb2: Product: EHCI Host Controller [ 1.147850] usb usb2: Manufacturer: Linux 5.0.0-32-lowlatency ehci_hcd [ 1.147851] usb usb2: SerialNumber: ... [ 1.147968] hub 2-0:1.0: USB hub found [ 1.147977] hub 2-0:1.0: 6 ports detected [ 1.148144] ehci-platform: EHCI generic platform driver [ 1.148151] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.148153] ohci-pci: OHCI PCI platform driver [ 1.148164] ohci-platform: OHCI generic platform driver [ 1.148169] uhci_hcd: USB Universal Host Controller Interface driver [ 1.148301] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.148305] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.148310] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.148531] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800 [ 1.148778] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.148780] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.148781] usb usb3: Product: UHCI Host Controller [ 1.148782] usb usb3: Manufacturer: Linux 5.0.0-32-lowlatency uhci_hcd [ 1.148783] usb usb3: SerialNumber: ... [ 1.148891] hub 3-0:1.0: USB hub found [ 1.148900] hub 3-0:1.0: 2 ports detected [ 1.149135] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.149140] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.149145] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.149362] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880 [ 1.149428] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.149431] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.149433] usb usb4: Product: UHCI Host Controller [ 1.149435] usb usb4: Manufacturer: Linux 5.0.0-32-lowlatency uhci_hcd [ 1.149437] usb usb4: SerialNumber: ... [ 1.149577] hub 4-0:1.0: USB hub found [ 1.149710] hub 4-0:1.0: 2 ports detected [ 1.149921] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.149925] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.149930] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.150152] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00 [ 1.150222] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.150225] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.150227] usb usb5: Product: UHCI Host Controller [ 1.150229] usb usb5: Manufacturer: Linux 5.0.0-32-lowlatency uhci_hcd [ 1.150230] usb usb5: SerialNumber: ... [ 1.150362] hub 5-0:1.0: USB hub found [ 1.150371] hub 5-0:1.0: 2 ports detected [ 1.150753] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.150758] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.150763] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.150986] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080 [ 1.151064] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.151067] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.151068] usb usb6: Product: UHCI Host Controller [ 1.151070] usb usb6: Manufacturer: Linux 5.0.0-32-lowlatency uhci_hcd [ 1.151072] usb usb6: SerialNumber: ... [ 1.151201] hub 6-0:1.0: USB hub found [ 1.151210] hub 6-0:1.0: 2 ports detected [ 1.151433] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.151437] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.151442] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.151806] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400 [ 1.151869] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.151870] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.151871] usb usb7: Product: UHCI Host Controller [ 1.151872] usb usb7: Manufacturer: Linux 5.0.0-32-lowlatency uhci_hcd [ 1.151873] usb usb7: SerialNumber: ... [ 1.151986] hub 7-0:1.0: USB hub found [ 1.151995] hub 7-0:1.0: 2 ports detected [ 1.152223] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.152227] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.152232] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.152449] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480 [ 1.152518] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00 [ 1.152520] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.152522] usb usb8: Product: UHCI Host Controller [ 1.152524] usb usb8: Manufacturer: Linux 5.0.0-32-lowlatency uhci_hcd [ 1.152526] usb usb8: SerialNumber: ... [ 1.152775] hub 8-0:1.0: USB hub found [ 1.152780] hub 8-0:1.0: 2 ports detected [ 1.152901] i8042: PNP: No PS/2 controller found. [ 1.152901] i8042: Probing ports directly. [ 1.156682] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.156729] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.156997] mousedev: PS/2 mouse device common for all mice [ 1.157554] rtc_cmos 00:01: RTC can wake from S4 [ 1.157833] rtc_cmos 00:01: registered as rtc0 [ 1.157848] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.157854] i2c /dev entries driver [ 1.157922] device-mapper: uevent: version 1.0.3 [ 1.157970] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX [ 1.157986] platform eisa.0: Probing EISA bus 0 [ 1.157987] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.157989] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.157990] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.157991] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.157992] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.157993] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.157993] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.157994] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.157995] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.157996] platform eisa.0: EISA: Detected 0 cards [ 1.158359] ledtrig-cpu: registered to indicate activity on CPUs [ 1.158566] NET: Registered protocol family 10 [ 1.167286] Segment Routing with IPv6 [ 1.167319] NET: Registered protocol family 17 [ 1.167545] Key type dns_resolver registered [ 1.168361] mce: Using 9 MCE banks [ 1.168373] RAS: Correctable Errors collector initialized. [ 1.168438] microcode: sig=0x106a5, pf=0x2, revision=0x1d [ 1.168762] microcode: Microcode Update Driver: v2.2. [ 1.168771] sched_clock: Marking stable (1168512096, 246626)->(1285207944, -116449222) [ 1.169322] registered taskstats version 1 [ 1.169329] Loading compiled-in X.509 certificates [ 1.171492] Loaded X.509 cert 'Build time autogenerated kernel key: 9801ec5dcc00bb05d5a9c353abcafed22cbf91d7' [ 1.171513] zswap: loaded using pool lzo/zbud [ 1.180095] Key type big_key registered [ 1.180100] Key type trusted registered [ 1.184274] Key type encrypted registered [ 1.184278] AppArmor: AppArmor sha1 policy hashing enabled [ 1.184285] ima: No TPM chip found, activating TPM-bypass! [ 1.184292] ima: Allocated hash algorithm: sha1 [ 1.184303] No architecture policies found [ 1.184322] evm: Initialising EVM extended attributes: [ 1.184323] evm: security.selinux [ 1.184324] evm: security.SMACK64 [ 1.184325] evm: security.SMACK64EXEC [ 1.184326] evm: security.SMACK64TRANSMUTE [ 1.184326] evm: security.SMACK64MMAP [ 1.184327] evm: security.apparmor [ 1.184328] evm: security.ima [ 1.184328] evm: security.capability [ 1.184330] evm: HMAC attrs: 0x1 [ 1.184733] Magic number: 7:490:911 [ 1.185089] rtc_cmos 00:01: setting system clock to 2019-10-21T00:54:42 UTC (1571619282) [ 1.409069] random: fast init done [ 1.587308] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.587736] ata4.00: ATA-11: INTENSO, SBFM11.2, max UDMA/133 [ 1.587739] ata4.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.588287] ata4.00: configured for UDMA/133 [ 1.588338] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.624161] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 [ 1.624164] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.653271] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 1.664213] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 1.699126] ata3.00: configured for UDMA/133 [ 1.828313] usb 3-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 [ 1.828316] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 1.828318] usb 3-1: Product: CSR8510 A10 [ 1.899401] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.899414] ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.899559] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.899571] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.904840] ata1.00: ATA-8: FUJITSU MHW2160BH, 0000001C, max UDMA/100 [ 1.904843] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.904851] ata1.01: ATA-9: MTFDDAK128MAM-1J1, 070H, max UDMA/100 [ 1.904853] ata1.01: 250069680 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.909986] ata1.00: configured for UDMA/100 [ 1.912627] ata1.01: configured for UDMA/100 [ 1.912945] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2160B 001C PQ: 0 ANSI: 5 [ 1.913411] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.913424] sd 0:0:0:0: [sda] Write Protect is off [ 1.913426] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.913447] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.913452] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.914062] scsi 0:0:1:0: Direct-Access ATA MTFDDAK128MAM-1J 070H PQ: 0 ANSI: 5 [ 1.949316] ata2.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 1.949318] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.949327] ata2.01: ATAPI: ATAPI DVD A DH16ACSH, JA11, max UDMA/100 [ 1.954481] ata2.00: configured for UDMA/133 [ 1.990237] usb 6-1: New USB device found, idVendor=08bb, idProduct=2900, bcdDevice= 1.00 [ 1.990240] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.990242] usb 6-1: Product: USB Audio CODEC [ 1.990244] usb 6-1: Manufacturer: Burr-Brown from TI [ 1.992480] ata2.01: configured for UDMA/100 [ 2.028749] sda: sda1 sda2 sda3 sda4 [ 2.028930] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 2.029235] scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 1A11 PQ: 0 ANSI: 5 [ 2.029274] sd 0:0:1:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.029293] sd 0:0:1:0: [sdb] Write Protect is off [ 2.029294] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.029328] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.029414] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 2.029440] sd 1:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.029458] sd 1:0:0:0: [sdc] Write Protect is off [ 2.029460] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.029491] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.029776] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.030321] sdb: sdb1 sdb2 sdb3 sdb4 [ 2.031177] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.032940] scsi 1:0:1:0: CD-ROM ATAPI DVD A DH16ACSH JA11 PQ: 0 ANSI: 5 [ 2.059609] sr 1:0:1:0: [sr0] scsi3-mmc drive: 10x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.059612] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.059980] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 2.060187] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 2.060621] scsi 2:0:0:0: Direct-Access ATA ST3320620AS K PQ: 0 ANSI: 5 [ 2.061058] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 2.061263] sd 2:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.061296] sd 2:0:0:0: [sdd] Write Protect is off [ 2.061300] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.061355] scsi 3:0:0:0: Direct-Access ATA INTENSO 11.2 PQ: 0 ANSI: 5 [ 2.061399] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.061489] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 2.061669] sd 3:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.061776] sd 3:0:0:0: [sde] Write Protect is off [ 2.061777] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.061876] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.063567] sde: sde1 sde2 sde3 sde4 [ 2.064373] sd 3:0:0:0: [sde] Attached SCSI disk [ 2.072788] sdc: sdc1 sdc2 [ 2.073919] sd 1:0:0:0: [sdc] Attached SCSI disk [ 2.080282] sdd: sdd1 sdd2 [ 2.081073] sd 2:0:0:0: [sdd] Attached SCSI disk [ 2.082885] Freeing unused decrypted memory: 2040K [ 2.083180] tsc: Refined TSC clocksource calibration: 2806.372 MHz [ 2.083202] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2873c424bfe, max_idle_ns: 440795258849 ns [ 2.083218] clocksource: Switched to clocksource tsc [ 2.083502] Freeing unused kernel image memory: 2516K [ 2.098252] Write protecting the kernel read-only data: 22528k [ 2.099639] Freeing unused kernel image memory: 2016K [ 2.100315] Freeing unused kernel image memory: 1692K [ 2.111604] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.111702] x86/mm: Checking user space page tables [ 2.122246] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.122247] Run /init as init process [ 2.134233] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.134826] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.134833] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.214181] sata_sil24 0000:03:00.0: version 1.1 [ 2.216921] scsi host4: sata_sil24 [ 2.217634] scsi host5: sata_sil24 [ 2.217698] ata5: SATA max UDMA/100 host m128@0xfbbffc00 port 0xfbbf8000 irq 24 [ 2.217700] ata6: SATA max UDMA/100 host m128@0xfbbffc00 port 0xfbbfa000 irq 24 [ 2.220772] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001) [ 2.220833] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20181213/utaddress-213) [ 2.220839] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.220842] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20181213/utaddress-213) [ 2.220846] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.220848] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20181213/utaddress-213) [ 2.220852] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.220853] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.222893] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.223188] scsi host6: pata_jmicron [ 2.223473] scsi host7: pata_jmicron [ 2.223515] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 [ 2.223516] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 [ 2.224100] hidraw: raw HID events driver (C) Jiri Kosina [ 2.224291] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20181213/utaddress-213) [ 2.224297] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.224884] ahci 0000:04:00.0: version 3.0 [ 2.226159] libphy: r8169: probed [ 2.226685] r8169 0000:06:00.0 eth0: RTL8168c/8111c, XX:XX:XX:XX:XX:XX, XID 3c4, IRQ 18 [ 2.226687] r8169 0000:06:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 2.230332] usbcore: registered new interface driver usbhid [ 2.230333] usbhid: USB HID core driver [ 2.235106] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.235109] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.235804] scsi host8: ahci [ 2.237446] scsi host9: ahci [ 2.237522] ata9: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16 [ 2.237525] ata10: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16 [ 2.263974] r8169 0000:06:00.0 enp6s0: renamed from eth0 [ 2.268547] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.3/0003:08BB:2900.0001/input/input5 [ 2.283322] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.320662] hid-generic 0003:08BB:2900.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:1d.0-1/input3 [ 2.349218] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.382569] ata7.00: ATA-7: SAMSUNG SP2514N, VF100-33, max UDMA/100 [ 2.382572] ata7.00: 488397168 sectors, multi 0: LBA48 [ 2.447374] random: crng init done [ 2.447377] random: 7 urandom warning(s) missed due to ratelimiting [ 2.477780] usb 1-2: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00 [ 2.477783] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.478221] hub 1-2:1.0: USB hub found [ 2.478370] hub 1-2:1.0: 4 ports detected [ 2.544647] ata10: SATA link down (SStatus 0 SControl 300) [ 2.545724] ata9: SATA link down (SStatus 0 SControl 300) [ 2.627211] usb 6-2: new full-speed USB device number 3 using uhci_hcd [ 2.781278] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 2.787311] firewire_core 0000:05:00.0: created device fw0: GUID 001e8c0000d1c014, S400 [ 2.810226] usb 6-2: New USB device found, idVendor=03f0, idProduct=0011, bcdDevice= 1.00 [ 2.810229] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.810231] usb 6-2: Product: OfficeJet G55 [ 2.810233] usb 6-2: Manufacturer: Hewlett-Packa [ 2.810235] usb 6-2: SerialNumber: ... [ 3.256215] usb 2-5: new high-speed USB device number 4 using ehci-pci [ 3.387332] usb 2-5: New USB device found, idVendor=17e9, idProduct=4300, bcdDevice=35.03 [ 3.387336] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.387338] usb 2-5: Product: USB3 to DVI [ 3.387340] usb 2-5: Manufacturer: DisplayLink [ 3.387342] usb 2-5: SerialNumber: ... [ 3.447281] usb 1-2.1: new high-speed USB device number 5 using ehci-pci [ 3.503212] usb 2-6: new high-speed USB device number 5 using ehci-pci [ 3.538041] usb 1-2.1: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00 [ 3.538044] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.538421] hub 1-2.1:1.0: USB hub found [ 3.538659] hub 1-2.1:1.0: 4 ports detected [ 3.635760] usb 2-6: New USB device found, idVendor=17e9, idProduct=4300, bcdDevice=40.62 [ 3.635763] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.635766] usb 2-6: Product: USB3 to DVI [ 3.635767] usb 2-6: Manufacturer: DisplayLink [ 3.635769] usb 2-6: SerialNumber: ... [ 3.651265] usb 1-6: new high-speed USB device number 6 using ehci-pci [ 3.780541] usb 1-6: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 3.780544] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 3.780546] usb 1-6: Product: USB 2.0 Hub [ 3.780917] hub 1-6:1.0: USB hub found [ 3.781162] hub 1-6:1.0: 4 ports detected [ 3.855280] usb 1-2.3: new high-speed USB device number 7 using ehci-pci [ 4.000014] usb 1-2.3: New USB device found, idVendor=0bc2, idProduct=2322, bcdDevice= 0.00 [ 4.000018] usb 1-2.3: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 4.000021] usb 1-2.3: Product: Expansion [ 4.000023] usb 1-2.3: Manufacturer: Seagate [ 4.000025] usb 1-2.3: SerialNumber: ... [ 4.005868] usbcore: registered new interface driver usb-storage [ 4.007594] scsi host10: uas [ 4.007679] usbcore: registered new interface driver uas [ 4.008869] scsi 10:0:0:0: Direct-Access Seagate Expansion 9300 PQ: 0 ANSI: 6 [ 4.010548] sd 10:0:0:0: Attached scsi generic sg6 type 0 [ 4.012086] sd 10:0:0:0: [sdf] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 4.012089] sd 10:0:0:0: [sdf] 4096-byte physical blocks [ 4.163281] usb 1-6.3: new low-speed USB device number 8 using ehci-pci [ 4.350463] usb 1-6.3: New USB device found, idVendor=1c4f, idProduct=0054, bcdDevice= 1.10 [ 4.350466] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.350468] usb 1-6.3: Product: Usb Mouse [ 4.350470] usb 1-6.3: Manufacturer: SIGMACHIP [ 4.353369] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.3/1-6.3:1.0/0003:1C4F:0054.0002/input/input6 [ 4.353613] hid-generic 0003:1C4F:0054.0002: input,hidraw1: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1a.7-6.3/input0 [ 4.413550] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 4.425279] usb 1-2.4: new high-speed USB device number 9 using ehci-pci [ 4.460167] ata5.00: ATA-8: WDC WD10EZEX-22RKKA0, 80.00A80, max UDMA/133 [ 4.460217] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.461338] ata5.00: configured for UDMA/100 [ 4.461701] scsi 4:0:0:0: Direct-Access ATA WDC WD10EZEX-22R 0A80 PQ: 0 ANSI: 5 [ 4.462212] sd 4:0:0:0: Attached scsi generic sg7 type 0 [ 4.462285] sd 4:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.462287] sd 4:0:0:0: [sdg] 4096-byte physical blocks [ 4.462323] sd 4:0:0:0: [sdg] Write Protect is off [ 4.462325] sd 4:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 4.462410] sd 4:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.512903] sdg: sdg1 sdg2 sdg3 sdg4 [ 4.514002] sd 4:0:0:0: [sdg] Attached SCSI disk [ 4.517083] usb 1-2.4: New USB device found, idVendor=0bc2, idProduct=331a, bcdDevice= 9.11 [ 4.517086] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.517088] usb 1-2.4: Product: Expansion Desk [ 4.517089] usb 1-2.4: Manufacturer: Seagate [ 4.517091] usb 1-2.4: SerialNumber: ... [ 4.517991] scsi host11: uas [ 4.518826] scsi 11:0:0:0: Direct-Access Seagate Expansion Desk 0911 PQ: 0 ANSI: 6 [ 4.520737] sd 11:0:0:0: Attached scsi generic sg8 type 0 [ 4.521993] sd 11:0:0:0: [sdh] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 4.521995] sd 11:0:0:0: [sdh] 4096-byte physical blocks [ 4.522541] sd 11:0:0:0: [sdh] Write Protect is off [ 4.522542] sd 11:0:0:0: [sdh] Mode Sense: 53 00 00 08 [ 4.523190] sd 11:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.523587] sd 11:0:0:0: [sdh] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 4.711280] usb 1-2.1.4: new low-speed USB device number 10 using ehci-pci [ 4.778545] sdh: sdh1 sdh2 sdh3 sdh4 [ 4.781733] sd 11:0:0:0: [sdh] Attached SCSI disk [ 4.824530] usb 1-2.1.4: New USB device found, idVendor=045e, idProduct=00db, bcdDevice= 1.73 [ 4.824533] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.824535] usb 1-2.1.4: Product: Natural\xc2\xae Ergonomic Keyboard 4000 [ 4.824537] usb 1-2.1.4: Manufacturer: Microsoft [ 4.847852] input: Microsoft Natural\xc2\xae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/0003:045E:00DB.0003/input/input7 [ 4.899567] microsoft 0003:045E:00DB.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Natural\xc2\xae Ergonomic Keyboard 4000] on usb-0000:00:1a.7-2.1.4/input0 [ 4.899815] input: Microsoft Natural\xc2\xae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.1/0003:045E:00DB.0004/input/input8 [ 4.951743] microsoft 0003:045E:00DB.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Natural\xc2\xae Ergonomic Keyboard 4000] on usb-0000:00:1a.7-2.1.4/input1 [ 6.118416] sd 10:0:0:0: [sdf] Write Protect is off [ 6.118419] sd 10:0:0:0: [sdf] Mode Sense: 4f 00 00 00 [ 6.119163] sd 10:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.119786] sd 10:0:0:0: [sdf] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 6.285290] sdf: sdf1 sdf2 sdf3 sdf4 [ 6.288969] sd 10:0:0:0: [sdf] Attached SCSI disk [ 6.661501] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 0) [ 6.662262] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 6.662265] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.663243] ata6.00: configured for UDMA/100 [ 6.663638] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5 [ 6.664077] sd 5:0:0:0: Attached scsi generic sg9 type 0 [ 6.664363] sd 5:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 6.664464] scsi 6:0:0:0: Direct-Access ATA SAMSUNG SP2514N 0-33 PQ: 0 ANSI: 5 [ 6.664485] sd 5:0:0:0: [sdi] Write Protect is off [ 6.664486] sd 5:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 6.664518] sd 5:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.664732] sd 6:0:0:0: Attached scsi generic sg10 type 0 [ 6.664780] sd 6:0:0:0: [sdj] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 6.664799] sd 6:0:0:0: [sdj] Write Protect is off [ 6.664801] sd 6:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 6.664842] sd 6:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.674146] sdj: sdj1 sdj2 [ 6.674918] sd 6:0:0:0: [sdj] Attached SCSI disk [ 7.202495] sdi: sdi2 < sdi5 sdi6 sdi7 sdi8 > [ 7.203763] sd 5:0:0:0: [sdi] Attached SCSI disk [ 8.523567] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 8.564937] EXT4-fs (sde3): mounted filesystem with ordered data mode. Opts: (null) [ 8.763438] systemd[1]: Inserted module 'autofs4' [ 8.788822] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 8.800377] systemd[1]: Detected architecture x86-64. [ 8.804419] systemd[1]: Set hostname to ... [ 8.804944] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 8.992282] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the unit file accordingly. [ 8.999180] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the unit file accordingly. [ 9.035834] systemd[1]: /lib/systemd/system/spice-vdagentd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/spice-vdagentd/spice-vdagentd.pid \xe2\x86\x92 /run/spice-vdagentd/spice-vdagentd.pid; please update the unit file accordingly. [ 9.038897] systemd[1]: Unnecessary job for INTENSO \xc3\xbc$r was removed. [ 9.038903] systemd[1]: Unnecessary job for /dev/disk/by-uuid/HASH_16C-E145-280C-70D5-41254F985B6E was removed. [ 9.039266] systemd[1]: Listening on udev Control Socket. [ 9.055595] EXT4-fs (sde3): re-mounted. Opts: (null) [ 9.057183] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro [ 9.066044] lp: driver loaded but no devices found [ 9.071155] ppdev: user-space parallel port driver [ 9.387615] i5500_temp 0000:00:14.3: Sensor seems to be disabled [ 9.406862] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT) [ 9.406896] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED) [ 9.406923] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 9.435678] IPMI message handler: version 39.2 [ 9.446435] ipmi device interface [ 9.487822] Bluetooth: Core ver 2.22 [ 9.487840] NET: Registered protocol family 31 [ 9.487841] Bluetooth: HCI device and connection manager initialized [ 9.487844] Bluetooth: HCI socket layer initialized [ 9.487846] Bluetooth: L2CAP socket layer initialized [ 9.487850] Bluetooth: SCO socket layer initialized [ 9.533842] usbcore: registered new interface driver btusb [ 9.689474] nvidia: loading out-of-tree module taints kernel. [ 9.689484] nvidia: module license 'NVIDIA' taints kernel. [ 9.689484] Disabling lock debugging due to kernel taint [ 9.689555] snd_hda_intel 0000:02:00.1: Disabling MSI [ 9.689562] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 9.695047] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 9.707886] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 9.709470] nvidia-nvlink: Nvlink Core is being initialized, major device number 238 [ 9.709908] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 9.711424] usbcore: registered new interface driver snd-usb-audio [ 9.720329] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1200: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 9.720332] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.720334] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 9.720335] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.720336] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 9.720337] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.720339] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 9.720341] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 9.720343] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 9.734098] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.734162] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.734261] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.734329] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 9.734531] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.734605] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 9.734681] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 9.734748] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 9.754250] systemd-journald[443]: Received request to flush runtime journal from PID 1 [ 9.943238] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 418.56 Fri Mar 15 12:59:26 CDT 2019 [ 9.953409] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 418.56 Fri Mar 15 12:32:40 CDT 2019 [ 9.956033] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver [ 9.956036] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 0 [ 9.997749] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2/input17 [ 9.997807] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2/input18 [ 9.997856] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card2/input19 [ 10.252253] usblp 6-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 3 vid 0x03F0 pid 0x0011 [ 10.252286] usbcore: registered new interface driver usblp [ 10.460425] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 10.460633] caller os_map_kernel_space.part.11+0x84/0x90 [nvidia] mapping multiple BARs [ 11.081428] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 236 [ 11.221187] Adding 5239804k swap on /dev/sdi8. Priority:-2 extents:1 across:5239804k FS [ 11.232184] Adding 5242876k swap on /dev/sde4. Priority:-3 extents:1 across:5242876k SSFS [ 11.239207] Adding 5242876k swap on /dev/sdg3. Priority:-4 extents:1 across:5242876k FS [ 11.248228] Adding 5242876k swap on /dev/sdg2. Priority:-5 extents:1 across:5242876k FS [ 11.253228] Adding 5243900k swap on /dev/sdi7. Priority:-6 extents:1 across:5243900k FS [ 11.259187] Adding 20970492k swap on /dev/sdh1. Priority:-7 extents:1 across:20970492k FS [ 11.526412] Adding 4362236k swap on /dev/sda3. Priority:-8 extents:1 across:4362236k FS [ 11.536317] Adding 2621436k swap on /dev/sdb4. Priority:-9 extents:1 across:2621436k SSFS [ 11.550308] Adding 6359036k swap on /dev/sda4. Priority:-10 extents:1 across:6359036k FS [ 11.608218] EXT4-fs (sdh2): mounted filesystem with ordered data mode. Opts: (null) [ 11.616776] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null) [ 11.655359] EXT4-fs (sdg4): mounted filesystem with ordered data mode. Opts: (null) [ 12.666730] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.666732] Bluetooth: BNEP filters: protocol multicast [ 12.666735] Bluetooth: BNEP socket layer initialized [ 12.859575] evdi: [I] Initialising logging on level 5 [ 12.859576] evdi: [I] Atomic driver:yes [ 13.112538] RTL8211B Gigabit Ethernet r8169-600:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-600:00, irq=IGNORE) [ 13.192710] r8169 0000:06:00.0 enp6s0: Link is Down [ 13.371510] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 13.371684] caller os_map_kernel_space.part.11+0x84/0x90 [nvidia] mapping multiple BARs [ 13.589755] evdi: [D] evdi_add_devices:163 Increasing device count to 1 [ 13.589866] evdi: [D] evdi_crtc_init:403 drm_crtc_init: 0 p000000009045afc6 [ 13.589874] evdi: [D] evdi_detect:96 (dev=0) poll connector state: disconnected [ 13.589877] [drm] Cannot find any crtc or sizes [ 13.589884] evdi: [W] evdi_painter_send_update_ready_if_needed:534 Painter does not exist! [ 13.589887] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.589887] [drm] No driver support for vblank timestamp query. [ 13.589961] [drm] Initialized evdi 1.6.1 20180913 for evdi.0 on minor 1 [ 14.114216] evdi: [D] evdi_driver_postclose:144 (dev=0) Process tries to close us, postclose [ 14.114218] evdi: [I] Task 1846 (Xorg) of process 1846 (Xorg) [ 14.114526] evdi: [D] evdi_driver_postclose:144 (dev=0) Process tries to close us, postclose [ 14.114527] evdi: [I] Task 1846 (Xorg) of process 1846 (Xorg) [ 14.117137] evdi: [D] evdi_painter_connect:629 (dev=0) Process is trying to connect [ 14.117139] evdi: [I] Task 1864 (DesktopManagerE) of process 1851 (DisplayLinkMana) [ 14.117141] evdi: [D] evdi_painter_connect:679 (dev=1) Connected with 00000000b67f8080 [ 14.117143] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.117700] evdi: [D] evdi_add_devices:163 Increasing device count to 2 [ 14.117804] evdi: [D] evdi_crtc_init:403 drm_crtc_init: 0 p000000008985143b [ 14.117812] evdi: [D] evdi_detect:96 (dev=0) poll connector state: disconnected [ 14.117814] [drm] Cannot find any crtc or sizes [ 14.117821] evdi: [W] evdi_painter_send_update_ready_if_needed:534 Painter does not exist! [ 14.117824] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 14.117824] [drm] No driver support for vblank timestamp query. [ 14.117952] [drm] Initialized evdi 1.6.1 20180913 for evdi.1 on minor 2 [ 14.408072] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.408074] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 14.408331] evdi: [D] evdi_painter_framebuffer_size:470 Scanout buffer not set. [ 14.408332] evdi: [D] evdi_painter_mark_dirty:498 (dev=1) Skip clip rect. Scanout buffer not set. [ 14.408350] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.408351] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 14.408881] evdi: [D] evdi_painter_dpms_notify:544 (dev=1) Notifying dpms mode: 3 [ 14.419648] evdi: [D] evdi_painter_dpms_notify:544 (dev=1) Notifying dpms mode: 3 [ 14.419789] evdi: [D] evdi_driver_postclose:144 (dev=1) Process tries to close us, postclose [ 14.419790] evdi: [I] Task 1846 (Xorg) of process 1846 (Xorg) [ 14.419914] evdi: [D] evdi_driver_postclose:144 (dev=1) Process tries to close us, postclose [ 14.419915] evdi: [I] Task 1846 (Xorg) of process 1846 (Xorg) [ 14.420116] evdi: [D] evdi_driver_postclose:144 (dev=1) Process tries to close us, postclose [ 14.420117] evdi: [I] Task 1846 (Xorg) of process 1846 (Xorg) [ 14.425421] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.425423] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 14.425624] evdi: [D] evdi_painter_framebuffer_size:470 Scanout buffer not set. [ 14.425625] evdi: [D] evdi_painter_mark_dirty:498 (dev=1) Skip clip rect. Scanout buffer not set. [ 14.425631] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.425632] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 14.426064] evdi: [D] evdi_painter_dpms_notify:544 (dev=1) Notifying dpms mode: 3 [ 14.429165] evdi: [D] evdi_painter_dpms_notify:544 (dev=1) Notifying dpms mode: 3 [ 14.429561] evdi: [D] evdi_driver_postclose:144 (dev=0) Process tries to close us, postclose [ 14.429562] evdi: [I] Task 1846 (Xorg) of process 1846 (Xorg) [ 14.429773] evdi: [D] evdi_driver_postclose:144 (dev=0) Process tries to close us, postclose [ 14.429774] evdi: [I] Task 1846 (Xorg) of process 1846 (Xorg) [ 14.435211] evdi: [D] evdi_detect:96 (dev=0) poll connector state: disconnected [ 14.435329] evdi: [D] evdi_painter_framebuffer_size:470 Scanout buffer not set. [ 14.435330] evdi: [D] evdi_painter_mark_dirty:498 (dev=0) Skip clip rect. Scanout buffer not set. [ 14.435337] evdi: [D] evdi_detect:96 (dev=0) poll connector state: disconnected [ 14.435675] evdi: [D] evdi_painter_dpms_notify:544 (dev=0) Notifying dpms mode: 3 [ 14.435676] evdi: [W] evdi_painter_send_dpms:379 Painter is not connected! [ 14.438832] evdi: [D] evdi_painter_dpms_notify:544 (dev=0) Notifying dpms mode: 3 [ 14.438833] evdi: [W] evdi_painter_send_dpms:379 Painter is not connected! [ 14.515855] evdi: [D] evdi_painter_connect:629 (dev=0) Process is trying to connect [ 14.515857] evdi: [I] Task 1864 (DesktopManagerE) of process 1851 (DisplayLinkMana) [ 14.515860] evdi: [D] evdi_painter_connect:679 (dev=2) Connected with 000000009167eb65 [ 14.515862] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 14.517964] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 14.517966] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 14.518071] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 14.518072] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 14.518288] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.518290] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 14.518390] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.518391] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 14.629587] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 14.629589] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 14.629700] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 14.629701] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 14.629879] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.629880] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 14.629979] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 14.629980] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 15.141629] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 15.141631] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 15.141748] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 15.141749] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 15.141938] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 15.141939] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 15.142042] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 15.142043] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 15.687733] r8169 0000:06:00.0 enp6s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 15.687743] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready [ 18.199290] usb 4-1: device descriptor read/64, error -110 [ 33.838169] irq 18: nobody cared (try booting with the "irqpoll" option) [ 33.838175] CPU: 0 PID: 193 Comm: irq/18-ehci_hcd Tainted: P IOE 5.0.0-32-lowlatency #34-Ubuntu [ 33.838175] Hardware name: System manufacturer System Product Name/P6T SE, BIOS 0908 09/21/2010 [ 33.838176] Call Trace: [ 33.838178] <IRQ> [ 33.838185] dump_stack+0x63/0x8a [ 33.838188] __report_bad_irq+0x3c/0xb6 [ 33.838191] note_interrupt.cold.9+0xb/0x5d [ 33.838193] handle_irq_event_percpu+0x6f/0x80 [ 33.838198] handle_irq_event+0x39/0x58 [ 33.838200] handle_fasteoi_irq+0x90/0x140 [ 33.838204] handle_irq+0x20/0x30 [ 33.838207] do_IRQ+0x4e/0xe0 [ 33.838210] common_interrupt+0xf/0xf [ 33.838211] </IRQ> [ 33.838214] RIP: 0010:_raw_spin_unlock_irqrestore+0x15/0x30 [ 33.838217] Code: e8 ed 21 5b ff 5d c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 66 66 66 66 90 55 48 89 e5 c6 07 00 66 66 66 90 48 89 f7 57 9d <66> 66 90 66 90 65 ff 0d ff 44 fc 72 74 02 5d c3 e8 b3 21 5b ff 5d [ 33.838218] RSP: 0018:ffffad77820d3db8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd [ 33.838221] RAX: ffffad77818cd020 RBX: 0000000000000000 RCX: 0000000000000000 [ 33.838222] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 33.838224] RBP: ffffad77820d3db8 R08: ffff97d031757280 R09: ffff97d033416608 [ 33.838225] R10: ffff97d0338163c8 R11: 0000000000000001 R12: 0000000000000246 [ 33.838226] R13: ffff97d027db5a80 R14: 0000000000006000 R15: ffff97d027da1800 [ 33.838231] ehci_irq+0x2af/0x470 [ 33.838233] ? __switch_to_asm+0x41/0x70 [ 33.838236] ? __switch_to+0x96/0x510 [ 33.838238] ? __switch_to_asm+0x41/0x70 [ 33.838241] ? finish_task_switch+0x74/0x260 [ 33.838244] ? __schedule+0x2de/0x8a0 [ 33.838247] ? irq_finalize_oneshot.part.42+0xe0/0xe0 [ 33.838251] usb_hcd_irq+0x2c/0x40 [ 33.838253] irq_forced_thread_fn+0x2f/0x80 [ 33.838256] irq_thread+0xea/0x170 [ 33.838258] ? wake_threads_waitq+0x30/0x30 [ 33.838261] kthread+0x120/0x140 [ 33.838264] ? irq_thread_check_affinity+0xe0/0xe0 [ 33.838266] ? kthread_create_on_node+0x60/0x60 [ 33.838268] ret_from_fork+0x35/0x40 [ 33.838271] handlers: [ 33.838275] [<00000000718d2f15>] irq_default_primary_handler threaded [<00000000a7ba28a7>] usb_hcd_irq [ 33.838279] [<00000000718d2f15>] irq_default_primary_handler threaded [<00000000a7ba28a7>] usb_hcd_irq [ 33.838283] [<00000000718d2f15>] irq_default_primary_handler threaded [<00000000abbcb1c5>] rtl8169_interrupt [r8169] [ 33.838290] Disabling IRQ #18 [ 34.071192] usb 4-1: device descriptor read/64, error -110 [ 34.293283] usb 4-1: new full-speed USB device number 3 using uhci_hcd [ 36.554420] rfkill: input handler disabled [ 37.524186] Bluetooth: RFCOMM TTY layer initialized [ 37.524191] Bluetooth: RFCOMM socket layer initialized [ 37.524196] Bluetooth: RFCOMM ver 1.11 [ 37.637021] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 37.637023] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 37.637266] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 37.637267] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 40.664864] evdi: [D] evdi_painter_dpms_notify:544 (dev=1) Notifying dpms mode: 3 [ 40.664916] evdi: [D] evdi_painter_dpms_notify:544 (dev=2) Notifying dpms mode: 3 [ 50.371502] usb 4-1: device descriptor read/64, error -110 [ 55.408103] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 55.408105] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 55.408278] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 55.408279] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 55.445043] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 55.445045] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 55.445200] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 55.445202] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 55.597734] evdi: [D] evdi_detect:92 (dev=2) poll connector state: connected [ 55.597736] evdi: [D] evdi_painter_get_edid_copy:230 (dev=2) EDID valid [ 55.597903] evdi: [D] evdi_detect:92 (dev=1) poll connector state: connected [ 55.597904] evdi: [D] evdi_painter_get_edid_copy:230 (dev=1) EDID valid [ 66.146385] usb 4-1: device descriptor read/64, error -110 [ 66.254618] usb usb4-port1: attempt power cycle [ 66.681443] usb 4-1: new full-speed USB device number 4 using uhci_hcd [ 78.027495] usb 4-1: device not accepting address 4, error -110 [ 78.141590] usb 4-1: new full-speed USB device number 5 using uhci_hcd [ 89.298200] usb 4-1: device not accepting address 5, error -110 [ 89.298226] usb usb4-port1: unable to enumerate USB device [ 371.661965] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 407.299384] r8169 0000:06:00.0: invalid short VPD tag 05 at offset 2