[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13 [ 0.000000] Linux version 5.10.12-200.fc33.x86_64 (XXX@XXX) (gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9), GNU ld version 2.35-18.fc33) #1 SMP Mon Feb 1 02:40:52 UTC 2021 [ 0.000000] Command line: BOOT_IMAGE=(hd6,gpt2)/vmlinuz-5.10.12-200.fc33.x86_64 root=/dev/mapper/XXXXXXXXXXXXXXXXXX ro rd.lvm.lv=... rhgb quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000de215fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000de216000-0x00000000de420fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000de421000-0x00000000de421fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000de422000-0x00000000de549fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000de54a000-0x00000000ded6bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ded6c000-0x00000000ded6cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ded6d000-0x00000000dedaffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dedb0000-0x00000000df586fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df587000-0x00000000df7dbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df7dc000-0x00000000df7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xce441018-0xce450257] usable ==> usable [ 0.000000] e820: update [mem 0xce441018-0xce450257] usable ==> usable [ 0.000000] e820: update [mem 0xce430018-0xce440057] usable ==> usable [ 0.000000] e820: update [mem 0xce430018-0xce440057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000ce430017] usable [ 0.000000] reserve setup_data: [mem 0x00000000ce430018-0x00000000ce440057] usable [ 0.000000] reserve setup_data: [mem 0x00000000ce440058-0x00000000ce441017] usable [ 0.000000] reserve setup_data: [mem 0x00000000ce441018-0x00000000ce450257] usable [ 0.000000] reserve setup_data: [mem 0x00000000ce450258-0x00000000de215fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000de216000-0x00000000de420fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000de421000-0x00000000de421fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000de422000-0x00000000de549fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000de54a000-0x00000000ded6bfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ded6c000-0x00000000ded6cfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ded6d000-0x00000000dedaffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000dedb0000-0x00000000df586fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000df587000-0x00000000df7dbfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000df7dc000-0x00000000df7fffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021dffffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xde52b000 ACPI 2.0=0xde52b000 SMBIOS=0xf04c0 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./B75M-D3H, BIOS F15 10/23/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.464 MHz processor [ 0.000692] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000697] last_pfn = 0x21e000 max_arch_pfn = 0x400000000 [ 0.000701] MTRR default type: uncachable [ 0.000701] MTRR fixed ranges enabled: [ 0.000702] 00000-9FFFF write-back [ 0.000703] A0000-BFFFF uncachable [ 0.000704] C0000-CFFFF write-protect [ 0.000704] D0000-DFFFF uncachable [ 0.000705] E0000-FFFFF write-protect [ 0.000706] MTRR variable ranges enabled: [ 0.000707] 0 base 000000000 mask E00000000 write-back [ 0.000708] 1 base 200000000 mask FF0000000 write-back [ 0.000709] 2 base 210000000 mask FF8000000 write-back [ 0.000709] 3 base 218000000 mask FFC000000 write-back [ 0.000710] 4 base 21C000000 mask FFE000000 write-back [ 0.000711] 5 base 0E0000000 mask FE0000000 uncachable [ 0.000711] 6 disabled [ 0.000712] 7 disabled [ 0.000712] 8 disabled [ 0.000713] 9 disabled [ 0.001070] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001321] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.001326] last_pfn = 0xdf800 max_arch_pfn = 0x400000000 [ 0.009306] found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] [ 0.009817] secureboot: Secure boot disabled [ 0.009818] RAMDISK: [mem 0x5a848000-0x5cab7fff] [ 0.009824] ACPI: Early table checksum verification disabled [ 0.009827] ACPI: RSDP 0x00000000DE52B000 000024 (v02 ALASKA) [ 0.009829] ACPI: XSDT 0x00000000DE52B078 00006C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009834] ACPI: FACP 0x00000000DE534F88 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.009839] ACPI: DSDT 0x00000000DE52B178 009E0C (v02 ALASKA A M I 00000012 INTL 20051117) [ 0.009842] ACPI: FACS 0x00000000DE548F80 000040 [ 0.009844] ACPI: APIC 0x00000000DE535080 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.009847] ACPI: MCFG 0x00000000DE535118 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.009849] ACPI: HPET 0x00000000DE535158 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.009852] ACPI: SSDT 0x00000000DE535190 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.009855] ACPI: SSDT 0x00000000DE535500 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.009857] ACPI: SSDT 0x00000000DE535EB0 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.009860] ACPI: DMAR 0x00000000DE536948 000080 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.009862] ACPI: BGRT 0x00000000DE5369C8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.009870] ACPI: Local APIC address 0xfee00000 [ 0.009913] No NUMA configuration found [ 0.009914] Faking a node at [mem 0x0000000000000000-0x000000021dffffff] [ 0.009923] NODE_DATA(0) allocated [mem 0x21dfd1000-0x21dffbfff] [ 0.032592] Zone ranges: [ 0.032595] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.032597] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.032598] Normal [mem 0x0000000100000000-0x000000021dffffff] [ 0.032599] Device empty [ 0.032599] Movable zone start for each node [ 0.032602] Early memory node ranges [ 0.032603] node 0: [mem 0x0000000000000000-0x000000000009efff] [ 0.032604] node 0: [mem 0x0000000000100000-0x00000000de215fff] [ 0.032605] node 0: [mem 0x00000000ded6c000-0x00000000ded6cfff] [ 0.032605] node 0: [mem 0x00000000dedb0000-0x00000000df586fff] [ 0.032606] node 0: [mem 0x00000000df7dc000-0x00000000df7fffff] [ 0.032607] node 0: [mem 0x0000000100000000-0x000000021dffffff] [ 0.032731] Zeroed struct page in unavailable ranges: 13903 pages [ 0.032732] Initmem setup node 0 [mem 0x0000000000000000-0x000000021dffffff] [ 0.032734] On node 0 totalpages: 2083249 [ 0.032735] DMA zone: 64 pages used for memmap [ 0.032735] DMA zone: 26 pages reserved [ 0.032736] DMA zone: 3999 pages, LIFO batch:0 [ 0.032782] DMA32 zone: 14185 pages used for memmap [ 0.032782] DMA32 zone: 907794 pages, LIFO batch:63 [ 0.042710] Normal zone: 18304 pages used for memmap [ 0.042713] Normal zone: 1171456 pages, LIFO batch:63 [ 0.055679] ACPI: PM-Timer IO Port: 0x408 [ 0.055682] ACPI: Local APIC address 0xfee00000 [ 0.055689] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.055699] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.055701] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.055702] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.055703] ACPI: IRQ0 used by override. [ 0.055704] ACPI: IRQ9 used by override. [ 0.055705] Using ACPI (MADT) for SMP configuration information [ 0.055707] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.055718] e820: update [mem 0xd26f2000-0xd2736fff] usable ==> reserved [ 0.055726] TSC deadline timer available [ 0.055727] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.055747] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.055748] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.055750] PM: hibernation: Registered nosave memory: [mem 0xce430000-0xce430fff] [ 0.055751] PM: hibernation: Registered nosave memory: [mem 0xce440000-0xce440fff] [ 0.055752] PM: hibernation: Registered nosave memory: [mem 0xce441000-0xce441fff] [ 0.055753] PM: hibernation: Registered nosave memory: [mem 0xce450000-0xce450fff] [ 0.055755] PM: hibernation: Registered nosave memory: [mem 0xd26f2000-0xd2736fff] [ 0.055756] PM: hibernation: Registered nosave memory: [mem 0xde216000-0xde420fff] [ 0.055757] PM: hibernation: Registered nosave memory: [mem 0xde421000-0xde421fff] [ 0.055757] PM: hibernation: Registered nosave memory: [mem 0xde422000-0xde549fff] [ 0.055758] PM: hibernation: Registered nosave memory: [mem 0xde54a000-0xded6bfff] [ 0.055759] PM: hibernation: Registered nosave memory: [mem 0xded6d000-0xdedaffff] [ 0.055761] PM: hibernation: Registered nosave memory: [mem 0xdf587000-0xdf7dbfff] [ 0.055762] PM: hibernation: Registered nosave memory: [mem 0xdf800000-0xf7ffffff] [ 0.055763] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.055764] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.055764] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.055765] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.055765] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.055766] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.055766] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.055767] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.055768] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.055768] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.055769] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.055770] [mem 0xdf800000-0xf7ffffff] available for PCI devices [ 0.055771] Booting paravirtualized kernel on bare hardware [ 0.055774] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.060005] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.060274] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.060280] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.060281] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.060310] Built 1 zonelists, mobility grouping on. Total pages: 2050670 [ 0.060311] Policy zone: Normal [ 0.060312] Kernel command line: BOOT_IMAGE=(hd6,gpt2)/vmlinuz-5.10.12-200.fc33.x86_64 root=/dev/mapper/XXXXXXXXXXXXXXXXXX ro rd.lvm.lv=... rhgb quiet [ 0.060928] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.061292] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.061365] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.094162] Memory: 7840092K/8332996K available (14345K kernel code, 3465K rwdata, 9704K rodata, 2536K init, 5504K bss, 492644K reserved, 0K cma-reserved) [ 0.094170] random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0 [ 0.094262] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.094272] Kernel/User page tables isolation: enabled [ 0.094291] ftrace: allocating 45612 entries in 179 pages [ 0.107331] ftrace: allocated 179 pages with 5 groups [ 0.107411] rcu: Hierarchical RCU implementation. [ 0.107412] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.107413] Trampoline variant of Tasks RCU enabled. [ 0.107413] Rude variant of Tasks RCU enabled. [ 0.107414] Tracing variant of Tasks RCU enabled. [ 0.107414] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.107415] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.110790] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.111000] random: crng done (trusting CPU's manufacturer) [ 0.111020] Console: colour dummy device 80x25 [ 0.111032] printk: console [tty0] enabled [ 0.111045] ACPI: Core revision 20200925 [ 0.111119] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.111130] APIC: Switch to symmetric I/O mode setup [ 0.111131] DMAR: Host address width 36 [ 0.111132] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.111136] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.111136] DMAR: RMRR base: 0x000000de3b8000 end: 0x000000de3c4fff [ 0.111138] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0 [ 0.111139] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.111140] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.111425] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.111426] x2apic enabled [ 0.111431] Switched APIC routing to cluster x2apic. [ 0.111827] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.116131] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f757dad376, max_idle_ns: 440795291441 ns [ 0.116134] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.92 BogoMIPS (lpj=3292464) [ 0.116136] pid_max: default: 32768 minimum: 301 [ 0.121154] LSM: Security Framework initializing [ 0.121162] Yama: becoming mindful. [ 0.121170] SELinux: Initializing. [ 0.121213] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.121235] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.121442] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.121454] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.121462] process: using mwait in idle threads [ 0.121465] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.121465] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.121468] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.121469] Spectre V2 : Mitigation: Full generic retpoline [ 0.121470] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.121470] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.121472] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.121472] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.121473] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.121475] SRBDS: Vulnerable: No microcode [ 0.121475] MDS: Mitigation: Clear CPU buffers [ 0.122273] Freeing SMP alternatives memory: 40K [ 0.125162] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.125286] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.125293] ... version: 3 [ 0.125293] ... bit width: 48 [ 0.125294] ... generic registers: 4 [ 0.125295] ... value mask: 0000ffffffffffff [ 0.125295] ... max period: 00007fffffffffff [ 0.125296] ... fixed-purpose events: 3 [ 0.125296] ... event mask: 000000070000000f [ 0.125405] rcu: Hierarchical SRCU implementation. [ 0.126004] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.126071] smp: Bringing up secondary CPUs ... [ 0.126132] x86: Booting SMP configuration: [ 0.126132] .... node #0, CPUs: #1 #2 #3 #4 [ 0.133219] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.133247] #5 #6 #7 [ 0.136180] smp: Brought up 1 node, 8 CPUs [ 0.136180] smpboot: Max logical packages: 1 [ 0.136180] smpboot: Total of 8 processors activated (52679.42 BogoMIPS) [ 0.137415] devtmpfs: initialized [ 0.137415] x86/mm: Memory block size: 128MB [ 0.137634] PM: Registering ACPI NVS region [mem 0xde422000-0xde549fff] (1212416 bytes) [ 0.137634] PM: Registering ACPI NVS region [mem 0xded6d000-0xdedaffff] (274432 bytes) [ 0.137634] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.137634] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.138149] pinctrl core: initialized pinctrl subsystem [ 0.138223] PM: RTC time: 18:12:40, date: 2021-02-04 [ 0.138323] NET: Registered protocol family 16 [ 0.138400] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.138406] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.138411] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.138423] thermal_sys: Registered thermal governor 'fair_share' [ 0.138423] thermal_sys: Registered thermal governor 'bang_bang' [ 0.138423] thermal_sys: Registered thermal governor 'step_wise' [ 0.138423] thermal_sys: Registered thermal governor 'user_space' [ 0.138423] cpuidle: using governor menu [ 0.138423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.138423] ACPI: bus type PCI registered [ 0.138423] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.138423] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.138423] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.138423] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.138423] PCI: Using configuration type 1 for base access [ 0.138425] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.138618] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.139991] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.270251] cryptd: max_cpu_qlen set to 1000 [ 0.271291] alg: No test for 842 (842-generic) [ 0.271291] alg: No test for 842 (842-scomp) [ 0.273276] raid6: skip pq benchmark and using algorithm sse2x4 [ 0.273276] raid6: using ssse3x2 recovery algorithm [ 0.273276] ACPI: Added _OSI(Module Device) [ 0.273276] ACPI: Added _OSI(Processor Device) [ 0.273276] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.273276] ACPI: Added _OSI(Processor Aggregator Device) [ 0.273276] ACPI: Added _OSI(Linux-Dell-Video) [ 0.273276] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.273276] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.276862] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.277858] ACPI: Dynamic OEM Table Load: [ 0.277863] ACPI: SSDT 0xFFFF94E340D3F000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.278354] ACPI: Dynamic OEM Table Load: [ 0.278358] ACPI: SSDT 0xFFFF94E340D43000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.278744] ACPI: Dynamic OEM Table Load: [ 0.278747] ACPI: SSDT 0xFFFF94E341161A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.280321] ACPI: Interpreter enabled [ 0.280339] ACPI: (supports S0 S3 S4 S5) [ 0.280340] ACPI: Using IOAPIC for interrupt routing [ 0.280359] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.280628] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.285920] ACPI: Power Resource [FN00] (off) [ 0.285975] ACPI: Power Resource [FN01] (off) [ 0.286028] ACPI: Power Resource [FN02] (off) [ 0.286082] ACPI: Power Resource [FN03] (off) [ 0.286136] ACPI: Power Resource [FN04] (off) [ 0.286531] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.286535] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.286704] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.286805] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC] [ 0.286806] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.288138] PCI host bridge to bus 0000:00 [ 0.288140] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.288141] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.288142] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.288143] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.288144] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.288145] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.288145] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.288146] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] [ 0.288147] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.288156] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 0.288231] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.288260] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.288358] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.288376] pci 0000:00:14.0: reg 0x10: [mem 0xf7100000-0xf710ffff 64bit] [ 0.288439] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.288517] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.288535] pci 0000:00:16.0: reg 0x10: [mem 0xf7119000-0xf711900f 64bit] [ 0.288603] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.288678] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.288693] pci 0000:00:1a.0: reg 0x10: [mem 0xf7118000-0xf71183ff] [ 0.288769] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.288849] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.288862] pci 0000:00:1b.0: reg 0x10: [mem 0xf7110000-0xf7113fff 64bit] [ 0.288925] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.289009] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.289093] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.289185] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.289268] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.289361] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.289376] pci 0000:00:1d.0: reg 0x10: [mem 0xf7117000-0xf71173ff] [ 0.289452] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.289526] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.289646] pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100 [ 0.289814] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.289825] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.289831] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.289837] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.289843] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.289849] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.289855] pci 0000:00:1f.2: reg 0x24: [mem 0xf7116000-0xf71167ff] [ 0.289891] pci 0000:00:1f.2: PME# supported from D3hot [ 0.289962] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.289977] pci 0000:00:1f.3: reg 0x10: [mem 0xf7115000-0xf71150ff 64bit] [ 0.289995] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.290104] pci 0000:01:00.0: [10de:1183] type 00 class 0x030000 [ 0.290114] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.290122] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.290130] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.290136] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.290141] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.290146] pci 0000:01:00.0: enabling Extended Tags [ 0.290156] pci 0000:01:00.0: BAR 3: assigned to efifb [ 0.290209] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.290243] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 0.290251] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.290275] pci 0000:01:00.1: enabling Extended Tags [ 0.290349] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.290351] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.290352] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.290354] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.290392] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.290466] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.290489] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.290521] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref] [ 0.290541] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref] [ 0.290670] pci 0000:03:00.0: supports D1 D2 [ 0.290671] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.290789] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.290792] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.290798] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.290813] pci_bus 0000:04: extended config space not accessible [ 0.290856] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.290864] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.290865] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.290866] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.290866] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.290867] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.290869] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.290870] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.290871] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode) [ 0.291353] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.291393] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.291431] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.291468] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.291506] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.291545] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.291583] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.291621] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.291852] iommu: Default domain type: Translated [ 0.291852] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.291852] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.291852] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.291852] vgaarb: loaded [ 0.291852] SCSI subsystem initialized [ 0.291852] libata version 3.00 loaded. [ 0.291852] ACPI: bus type USB registered [ 0.291852] usbcore: registered new interface driver usbfs [ 0.291852] usbcore: registered new interface driver hub [ 0.291852] usbcore: registered new device driver usb [ 0.291852] pps_core: LinuxPPS API ver. 1 registered [ 0.291852] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.291852] PTP clock support registered [ 0.291852] EDAC MC: Ver: 3.0.0 [ 0.292153] Registered efivars operations [ 0.292239] NetLabel: Initializing [ 0.292240] NetLabel: domain hash size = 128 [ 0.292240] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.292251] NetLabel: unlabeled traffic allowed by default [ 0.292254] PCI: Using ACPI for IRQ routing [ 0.293730] PCI: pci_cache_line_size set to 64 bytes [ 0.293766] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.293767] e820: reserve RAM buffer [mem 0xce430018-0xcfffffff] [ 0.293768] e820: reserve RAM buffer [mem 0xce441018-0xcfffffff] [ 0.293769] e820: reserve RAM buffer [mem 0xd26f2000-0xd3ffffff] [ 0.293770] e820: reserve RAM buffer [mem 0xde216000-0xdfffffff] [ 0.293771] e820: reserve RAM buffer [mem 0xded6d000-0xdfffffff] [ 0.293772] e820: reserve RAM buffer [mem 0xdf587000-0xdfffffff] [ 0.293772] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff] [ 0.293773] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff] [ 0.293777] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.293777] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.295155] clocksource: Switched to clocksource tsc-early [ 0.311738] VFS: Disk quotas dquot_6.6.0 [ 0.311751] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.311799] pnp: PnP ACPI init [ 0.311890] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.311895] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.311959] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.311960] system 00:01: [io 0x0200-0x020f] has been reserved [ 0.311962] system 00:01: [io 0xffff] has been reserved [ 0.311963] system 00:01: [io 0xffff] has been reserved [ 0.311964] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.311964] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.311966] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.311968] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.311984] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.312019] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.312022] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.312120] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.312121] system 00:04: [io 0x0a30-0x0a3f] has been reserved [ 0.312122] system 00:04: [io 0x0a20-0x0a2f] has been reserved [ 0.312125] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.312318] pnp 00:05: [dma 0 disabled] [ 0.312349] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.312559] pnp 00:06: [dma 0 disabled] [ 0.312636] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.312672] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.312675] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.312834] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.312835] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.312836] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.312837] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.312838] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.312839] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.312840] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.312841] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.312842] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.312843] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.312844] system 00:08: [mem 0xe0000000-0xe0000fff] has been reserved [ 0.312847] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.312941] pnp: PnP ACPI: found 9 devices [ 0.318405] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.318448] NET: Registered protocol family 2 [ 0.318583] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.318597] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.318687] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.318860] TCP: Hash tables configured (established 65536 bind 65536) [ 0.318914] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.318941] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.318964] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.319016] NET: Registered protocol family 1 [ 0.319019] NET: Registered protocol family 44 [ 0.319027] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.319029] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.319031] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.319033] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.319035] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.319045] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.319046] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.319052] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.319057] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.319066] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.319066] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.319067] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.319068] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.319069] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.319070] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.319071] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.319072] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window] [ 0.319073] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.319074] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.319074] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref] [ 0.319075] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.319076] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] [ 0.319077] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.319078] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.319079] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.319080] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.319081] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.319082] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.319083] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.319084] pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window] [ 0.335252] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c0 took 15562 usecs [ 0.352249] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c0 took 16588 usecs [ 0.352267] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.352286] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.352293] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.352343] Trying to unpack rootfs image as initramfs... [ 0.737176] Freeing initrd memory: 35264K [ 0.737255] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.737256] software IO TLB: mapped [mem 0x00000000c5000000-0x00000000c9000000] (64MB) [ 0.737978] Initialise system trusted keyrings [ 0.737988] Key type blacklist registered [ 0.738029] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.738983] zbud: loaded [ 0.739357] integrity: Platform Keyring initialized [ 0.748088] NET: Registered protocol family 38 [ 0.748090] xor: automatically using best checksumming function avx [ 0.748091] Key type asymmetric registered [ 0.748092] Asymmetric key parser 'x509' registered [ 0.748096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.748121] io scheduler mq-deadline registered [ 0.748122] io scheduler kyber registered [ 0.748149] io scheduler bfq registered [ 0.748215] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.748659] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.748673] efifb: probing for efifb [ 0.748693] efifb: showing boot graphics [ 0.749756] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k [ 0.749757] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.749757] efifb: scrolling: redraw [ 0.749758] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.749785] fbcon: Deferring console take-over [ 0.749786] fb0: EFI VGA frame buffer device [ 0.749792] intel_idle: MWAIT substates: 0x1120 [ 0.749793] intel_idle: v0.5.1 model 0x3A [ 0.750020] intel_idle: Local APIC timer is reliable in all C-states [ 0.750117] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.750149] ACPI: Power Button [PWRB] [ 0.750173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.750193] ACPI: Power Button [PWRF] [ 0.750755] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.750756] ACPI: Thermal Zone [TZ00] (28 C) [ 0.750933] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.750934] ACPI: Thermal Zone [TZ01] (30 C) [ 0.751074] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.751132] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.752514] Non-volatile memory driver v1.3 [ 0.752532] Linux agpgart interface v0.103 [ 0.753002] ahci 0000:00:1f.2: version 3.0 [ 0.763193] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x29 impl SATA mode [ 0.763198] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 0.769777] scsi host0: ahci [ 0.770008] scsi host1: ahci [ 0.770081] scsi host2: ahci [ 0.770152] scsi host3: ahci [ 0.770308] scsi host4: ahci [ 0.770381] scsi host5: ahci [ 0.770410] ata1: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116100 irq 28 [ 0.770411] ata2: DUMMY [ 0.770412] ata3: DUMMY [ 0.770413] ata4: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116280 irq 28 [ 0.770414] ata5: DUMMY [ 0.770415] ata6: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116380 irq 28 [ 0.770525] libphy: Fixed MDIO Bus: probed [ 0.770598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.770600] ehci-pci: EHCI PCI platform driver [ 0.770690] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.770717] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.770727] ehci-pci 0000:00:1a.0: debug port 2 [ 0.774638] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.774649] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7118000 [ 0.781179] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.781248] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 0.781249] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.781250] usb usb1: Product: EHCI Host Controller [ 0.781251] usb usb1: Manufacturer: Linux 5.10.12-200.fc33.x86_64 ehci_hcd [ 0.781252] usb usb1: SerialNumber: ... [ 0.781340] hub 1-0:1.0: USB hub found [ 0.781345] hub 1-0:1.0: 2 ports detected [ 0.781521] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.781553] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.781563] ehci-pci 0000:00:1d.0: debug port 2 [ 0.785472] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.785480] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7117000 [ 0.792178] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.792243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 0.792245] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.792245] usb usb2: Product: EHCI Host Controller [ 0.792246] usb usb2: Manufacturer: Linux 5.10.12-200.fc33.x86_64 ehci_hcd [ 0.792247] usb usb2: SerialNumber: ... [ 0.792326] hub 2-0:1.0: USB hub found [ 0.792332] hub 2-0:1.0: 2 ports detected [ 0.792431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.792434] ohci-pci: OHCI PCI platform driver [ 0.792440] uhci_hcd: USB Universal Host Controller Interface driver [ 0.792523] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.792552] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.793606] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 0.793610] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.793719] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 0.793720] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.793721] usb usb3: Product: xHCI Host Controller [ 0.793722] usb usb3: Manufacturer: Linux 5.10.12-200.fc33.x86_64 xhci-hcd [ 0.793722] usb usb3: SerialNumber: ... [ 0.793789] hub 3-0:1.0: USB hub found [ 0.793797] hub 3-0:1.0: 4 ports detected [ 0.794029] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.794055] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.794057] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.794083] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 0.794084] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.794085] usb usb4: Product: xHCI Host Controller [ 0.794086] usb usb4: Manufacturer: Linux 5.10.12-200.fc33.x86_64 xhci-hcd [ 0.794086] usb usb4: SerialNumber: ... [ 0.794155] hub 4-0:1.0: USB hub found [ 0.794162] hub 4-0:1.0: 4 ports detected [ 0.794401] usbcore: registered new interface driver usbserial_generic [ 0.794405] usbserial: USB Serial support registered for generic [ 0.794419] i8042: PNP: No PS/2 controller found. [ 0.794419] i8042: Probing ports directly. [ 0.794854] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.794857] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.794917] mousedev: PS/2 mouse device common for all mice [ 0.794997] rtc_cmos 00:02: RTC can wake from S4 [ 0.795169] rtc_cmos 00:02: registered as rtc0 [ 0.795234] rtc_cmos 00:02: setting system clock to 2021-02-04T18:12:40 UTC (1612462360) [ 0.795244] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.795274] device-mapper: uevent: version 1.0.3 [ 0.795313] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: XXX@XXX [ 0.795396] intel_pstate: Intel P-state driver initializing [ 0.796023] hid: raw HID events driver (C) Jiri Kosina [ 0.796070] usbcore: registered new interface driver usbhid [ 0.796071] usbhid: USB HID core driver [ 0.796188] drop_monitor: Initializing network drop monitor service [ 0.796263] Initializing XFRM netlink socket [ 0.796330] NET: Registered protocol family 10 [ 0.800289] Segment Routing with IPv6 [ 0.800290] RPL Segment Routing with IPv6 [ 0.800303] mip6: Mobile IPv6 [ 0.800304] NET: Registered protocol family 17 [ 0.801014] microcode: sig=0x306a9, pf=0x2, revision=0x21 [ 0.801045] microcode: Microcode Update Driver: v2.2. [ 0.801048] IPI shorthand broadcast: enabled [ 0.801053] AVX version of gcm_enc/dec engaged. [ 0.801053] AES CTR mode by8 optimization enabled [ 0.816103] sched_clock: Marking stable (815946085, 152457)->(832401747, -16303205) [ 0.816247] registered taskstats version 1 [ 0.816255] Loading compiled-in X.509 certificates [ 0.816943] Loaded X.509 cert 'Fedora kernel signing key: e428ae061eaa18fd24d3ccf84731daaeb50ce476' [ 0.816959] zswap: loaded using pool lzo/zbud [ 0.817083] Key type ._fscrypt registered [ 0.817084] Key type .fscrypt registered [ 0.817085] Key type fscrypt-provisioning registered [ 0.817249] Btrfs loaded, crc32c=crc32c-generic [ 0.819742] Key type encrypted registered [ 0.821783] ima: No TPM chip found, activating TPM-bypass! [ 0.821787] ima: Allocated hash algorithm: sha256 [ 0.821817] ima: No architecture policies found [ 0.821825] evm: Initialising EVM extended attributes: [ 0.821825] evm: security.selinux [ 0.821826] evm: security.ima [ 0.821826] evm: security.capability [ 0.821827] evm: HMAC attrs: 0x1 [ 0.822066] PM: Magic number: 9:352:240 [ 0.822173] RAS: Correctable Errors collector initialized. [ 1.082185] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.083007] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330) [ 1.083012] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 1.083071] ata1.00: ATA-9: Apacer AS340 240GB, Q0526A, max UDMA/133 [ 1.083072] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 32), AA [ 1.083160] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.083188] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.083539] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330) [ 1.083550] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT0._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 1.083864] ata1.00: configured for UDMA/133 [ 1.083991] scsi 0:0:0:0: Direct-Access ATA Apacer AS340 24 6A PQ: 0 ANSI: 5 [ 1.084087] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.084156] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330) [ 1.084169] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 1.084181] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.084188] sd 0:0:0:0: [sda] Write Protect is off [ 1.084190] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.084199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.084298] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330) [ 1.084303] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 1.084436] ata6.00: ATA-9: ST6000AS0002-1N917X, AR13, max UDMA/133 [ 1.084438] ata6.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.084593] ata4.00: ATA-9: ST8000AS0002-1NA17Z, AR15, max UDMA/133 [ 1.084594] ata4.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.085229] sda: sda1 sda2 sda3 [ 1.085368] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT5._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330) [ 1.085371] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT5._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 1.085570] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.085628] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT3._GTF.DSSP], AE_NOT_FOUND (20200925/psargs-330) [ 1.085633] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT3._GTF due to previous error (AE_NOT_FOUND) (20200925/psparse-529) [ 1.085641] ata6.00: configured for UDMA/133 [ 1.085856] ata4.00: configured for UDMA/133 [ 1.085902] scsi 3:0:0:0: Direct-Access ATA ST8000AS0002-1NA AR15 PQ: 0 ANSI: 5 [ 1.085981] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.086006] sd 3:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.086008] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 1.086017] sd 3:0:0:0: [sdb] Write Protect is off [ 1.086019] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.086035] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.086078] scsi 5:0:0:0: Direct-Access ATA ST6000AS0002-1N9 AR13 PQ: 0 ANSI: 5 [ 1.086162] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1.086199] sd 5:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 1.086200] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 1.086206] sd 5:0:0:0: [sdc] Write Protect is off [ 1.086207] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.086217] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.103152] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.112148] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.119300] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1.124652] sdb: sdb1 [ 1.124926] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.133219] usb 4-1: New USB device found, idVendor=0bc2, idProduct=ab45, bcdDevice=48.85 [ 1.133221] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.133222] usb 4-1: Product: Backup+ Hub [ 1.133223] usb 4-1: Manufacturer: Seagate [ 1.133223] usb 4-1: SerialNumber: ... [ 1.134951] hub 4-1:1.0: USB hub found [ 1.135263] hub 4-1:1.0: 3 ports detected [ 1.135658] sdc: sdc1 [ 1.135985] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.137442] Freeing unused decrypted memory: 2036K [ 1.137859] Freeing unused kernel image (initmem) memory: 2536K [ 1.141175] Write protecting the kernel read-only data: 26624k [ 1.141750] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.142080] Freeing unused kernel image (rodata/data gap) memory: 536K [ 1.222926] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.222929] rodata_test: all tests were successful [ 1.222930] x86/mm: Checking user space page tables [ 1.224593] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.224595] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.224870] hub 1-1:1.0: USB hub found [ 1.224964] hub 1-1:1.0: 6 ports detected [ 1.233599] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.233601] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.233754] hub 2-1:1.0: USB hub found [ 1.233844] hub 2-1:1.0: 6 ports detected [ 1.242145] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.266235] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.266239] Run /init as init process [ 1.266240] with arguments: [ 1.266241] /init [ 1.266241] rhgb [ 1.266242] with environment: [ 1.266242] HOME=/ [ 1.266243] TERM=linux [ 1.266243] BOOT_IMAGE=(hd6,gpt2)/vmlinuz-5.10.12-200.fc33.x86_64 [ 1.362992] systemd[1]: systemd v246.7-2.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 1.371358] usb 3-1: New USB device found, idVendor=0bc2, idProduct=ab44, bcdDevice=48.85 [ 1.371362] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.371364] usb 3-1: Product: Backup+ Hub [ 1.371365] usb 3-1: Manufacturer: Seagate [ 1.371367] usb 3-1: SerialNumber: ... [ 1.371960] hub 3-1:1.0: USB hub found [ 1.372277] hub 3-1:1.0: 3 ports detected [ 1.375282] systemd[1]: Detected architecture x86-64. [ 1.375287] systemd[1]: Running in initial RAM disk. [ 1.375357] systemd[1]: Set hostname to ... [ 1.459823] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 1.474580] systemd[1]: Queued start job for default target Initrd Default Target. [ 1.474815] systemd[1]: Reached target Local File Systems. [ 1.474908] systemd[1]: Reached target Slices. [ 1.474922] systemd[1]: Reached target Swap. [ 1.474932] systemd[1]: Reached target Timers. [ 1.475056] systemd[1]: Listening on Journal Audit Socket. [ 1.475149] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.475243] systemd[1]: Listening on Journal Socket. [ 1.475320] systemd[1]: Listening on udev Control Socket. [ 1.475379] systemd[1]: Listening on udev Kernel Socket. [ 1.475390] systemd[1]: Reached target Sockets. [ 1.476511] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 1.477012] systemd[1]: Started Memstrack Anylazing Service. [ 1.477646] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ 1.478923] systemd[1]: Starting Journal Service... [ 1.479600] systemd[1]: Starting Load Kernel Modules... [ 1.480504] systemd[1]: Starting Setup Virtual Console... [ 1.481257] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 1.482210] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.484903] usb 4-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 1.489278] systemd[1]: memstrack.service: Succeeded. [ 1.490353] systemd[1]: Finished Create Static Device Nodes in /dev. [ 1.499000] usb 4-2: New USB device found, idVendor=0bc2, idProduct=ab45, bcdDevice=48.85 [ 1.499002] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.499004] usb 4-2: Product: Backup+ Hub [ 1.499005] usb 4-2: Manufacturer: Seagate [ 1.499007] usb 4-2: SerialNumber: ... [ 1.500044] hub 4-2:1.0: USB hub found [ 1.500303] hub 4-2:1.0: 3 ports detected [ 1.502146] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 1.510140] usb 2-1.5: new high-speed USB device number 3 using ehci-pci [ 1.542522] fuse: init (API version 7.32) [ 1.544187] Asymmetric key parser 'pkcs8' registered [ 1.545187] systemd[1]: Finished Load Kernel Modules. [ 1.546078] systemd[1]: Starting Apply Kernel Variables... [ 1.549955] systemd[1]: Finished Setup Virtual Console. [ 1.550125] systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped. [ 1.550908] systemd[1]: Starting dracut cmdline hook... [ 1.554696] systemd[1]: Finished Apply Kernel Variables. [ 1.561172] usb 4-1.1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 1.564256] systemd[1]: Started Journal Service. [ 1.574713] usb 4-1.1: New USB device found, idVendor=0bc2, idProduct=ab38, bcdDevice= 1.00 [ 1.574715] usb 4-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 1.574716] usb 4-1.1: Product: Backup+ Hub BK [ 1.574716] usb 4-1.1: Manufacturer: Seagate [ 1.574717] usb 4-1.1: SerialNumber: ... [ 1.581445] usb 1-1.3: New USB device found, idVendor=0bc2, idProduct=3312, bcdDevice= 7.39 [ 1.581446] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.581447] usb 1-1.3: Product: Expansion Desk [ 1.581448] usb 1-1.3: Manufacturer: Seagate [ 1.581449] usb 1-1.3: SerialNumber: ... [ 1.589444] usb 2-1.5: New USB device found, idVendor=0bc2, idProduct=3312, bcdDevice= 7.39 [ 1.589446] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.589447] usb 2-1.5: Product: Expansion Desk [ 1.589448] usb 2-1.5: Manufacturer: Seagate [ 1.589448] usb 2-1.5: SerialNumber: ... [ 1.646144] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.654143] usb 2-1.6: new high-speed USB device number 4 using ehci-pci [ 1.689146] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 1.698167] usbcore: registered new interface driver usb-storage [ 1.703807] scsi host6: uas [ 1.704100] scsi host7: uas [ 1.704663] scsi 6:0:0:0: Direct-Access Seagate Backup+ Hub BK D781 PQ: 0 ANSI: 6 [ 1.704800] scsi host8: uas [ 1.704869] usbcore: registered new interface driver uas [ 1.705437] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 1.706082] scsi 8:0:0:0: Direct-Access Seagate Expansion Desk 0739 PQ: 0 ANSI: 6 [ 1.706242] scsi 7:0:0:0: Direct-Access Seagate Expansion Desk 0739 PQ: 0 ANSI: 6 [ 1.706968] sd 6:0:0:0: [sdd] 15628053167 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 1.706970] sd 6:0:0:0: [sdd] 4096-byte physical blocks [ 1.707078] sd 6:0:0:0: [sdd] Write Protect is off [ 1.707080] sd 6:0:0:0: [sdd] Mode Sense: 4f 00 00 00 [ 1.707238] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.707438] sd 6:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 1.708071] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 1.709547] scsi 8:0:0:0: Attached scsi generic sg5 type 0 [ 1.726204] sd 7:0:0:0: [sde] 976754645 4096-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.726828] sd 7:0:0:0: [sde] Write Protect is off [ 1.726830] sd 7:0:0:0: [sde] Mode Sense: 2b 00 10 08 [ 1.727700] sd 8:0:0:0: [sdf] 976754645 4096-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.727823] usb 1-1.4: New USB device found, idVendor=0bc2, idProduct=331a, bcdDevice= 9.15 [ 1.727824] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.727825] usb 1-1.4: Product: Expansion Desk [ 1.727826] usb 1-1.4: Manufacturer: Seagate [ 1.727827] usb 1-1.4: SerialNumber: ... [ 1.727951] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.728329] sd 8:0:0:0: [sdf] Write Protect is off [ 1.728331] sd 8:0:0:0: [sdf] Mode Sense: 2b 00 10 08 [ 1.729577] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.733448] usb 2-1.6: New USB device found, idVendor=0bc2, idProduct=ab31, bcdDevice= 3.42 [ 1.733450] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.733451] usb 2-1.6: Product: Backup+ Desk [ 1.733451] usb 2-1.6: Manufacturer: Seagate [ 1.733452] usb 2-1.6: SerialNumber: ... [ 1.736856] sde: sde1 [ 1.736891] sdf: sdf1 [ 1.740168] scsi host10: uas [ 1.741328] scsi 10:0:0:0: Direct-Access Seagate Backup+ Desk 0342 PQ: 0 ANSI: 6 [ 1.743146] tsc: Refined TSC clocksource calibration: 3292.522 MHz [ 1.743153] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b41de32, max_idle_ns: 440795328220 ns [ 1.743169] clocksource: Switched to clocksource tsc [ 1.743207] sd 10:0:0:0: Attached scsi generic sg6 type 0 [ 1.745164] scsi host9: uas [ 1.745828] scsi 9:0:0:0: Direct-Access Seagate Expansion Desk 0915 PQ: 0 ANSI: 6 [ 1.747575] sd 9:0:0:0: Attached scsi generic sg7 type 0 [ 1.748827] sd 9:0:0:0: [sdh] 11721045167 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 1.748829] sd 9:0:0:0: [sdh] 4096-byte physical blocks [ 1.749075] sd 9:0:0:0: [sdh] Write Protect is off [ 1.749077] sd 9:0:0:0: [sdh] Mode Sense: 53 00 00 08 [ 1.749575] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.749950] sd 9:0:0:0: [sdh] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 1.757452] sd 8:0:0:0: [sdf] Attached SCSI disk [ 1.757702] sd 7:0:0:0: [sde] Attached SCSI disk [ 1.761330] sd 10:0:0:0: [sdg] 976754645 4096-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.761950] sd 10:0:0:0: [sdg] Write Protect is off [ 1.761952] sd 10:0:0:0: [sdg] Mode Sense: 2b 00 10 08 [ 1.763450] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 1.771833] sdg: sdg1 [ 1.778268] sdd: sdd1 [ 1.779194] sd 6:0:0:0: [sdd] Attached SCSI disk [ 1.792830] sd 10:0:0:0: [sdg] Attached SCSI disk [ 1.809151] usb 1-1.5: new full-speed USB device number 5 using ehci-pci [ 1.813278] fbcon: Taking over console [ 1.814223] Console: switching to colour frame buffer device 128x48 [ 1.817816] usb 3-2: New USB device found, idVendor=0bc2, idProduct=ab44, bcdDevice=48.85 [ 1.817819] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.817820] usb 3-2: Product: Backup+ Hub [ 1.817821] usb 3-2: Manufacturer: Seagate [ 1.817823] usb 3-2: SerialNumber: ... [ 1.819208] hub 3-2:1.0: USB hub found [ 1.819502] hub 3-2:1.0: 3 ports detected [ 1.826963] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.831193] libphy: r8169: probed [ 1.831447] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, XX:XX:XX:XX:XX:XX, XID 2c9, IRQ 30 [ 1.831449] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.890981] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 1.891455] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 1.891457] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.891459] usb 1-1.5: Product: USB Receiver [ 1.891460] usb 1-1.5: Manufacturer: Logitech [ 1.893567] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C52B.0001/input/input5 [ 1.929186] usb 4-3: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [ 1.941947] usb 4-3: New USB device found, idVendor=0bc2, idProduct=331a, bcdDevice= 9.15 [ 1.941950] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.941951] usb 4-3: Product: Expansion Desk [ 1.941953] usb 4-3: Manufacturer: Seagate [ 1.941954] usb 4-3: SerialNumber: ... [ 1.945295] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input0 [ 1.947428] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input6 [ 1.947551] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input7 [ 1.951715] scsi host11: uas [ 1.952148] scsi 11:0:0:0: Direct-Access Seagate Expansion Desk 0915 PQ: 0 ANSI: 6 [ 1.953122] sd 11:0:0:0: Attached scsi generic sg8 type 0 [ 1.953665] sd 11:0:0:0: [sdi] 11721045167 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 1.953668] sd 11:0:0:0: [sdi] 4096-byte physical blocks [ 1.953785] sd 11:0:0:0: [sdi] Write Protect is off [ 1.953787] sd 11:0:0:0: [sdi] Mode Sense: 53 00 00 08 [ 1.954032] sd 11:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.955754] sd 11:0:0:0: [sdi] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 1.999331] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C52B.0002/input/input8 [ 1.999434] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input1 [ 2.001749] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input2 [ 2.006178] usb 4-1.2: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd [ 2.006409] sdi: sdi1 [ 2.007764] sd 11:0:0:0: [sdi] Attached SCSI disk [ 2.019211] usb 4-1.2: New USB device found, idVendor=0bc2, idProduct=ab31, bcdDevice= 3.42 [ 2.019214] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.019216] usb 4-1.2: Product: Backup+ Desk [ 2.019217] usb 4-1.2: Manufacturer: Seagate [ 2.019218] usb 4-1.2: SerialNumber: ... [ 2.025835] scsi host12: uas [ 2.026947] scsi 12:0:0:0: Direct-Access Seagate Backup+ Desk 0342 PQ: 0 ANSI: 6 [ 2.028034] sd 12:0:0:0: Attached scsi generic sg9 type 0 [ 2.045481] sd 12:0:0:0: [sdj] 976754645 4096-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.045879] sd 12:0:0:0: [sdj] Write Protect is off [ 2.045881] sd 12:0:0:0: [sdj] Mode Sense: 2b 00 10 08 [ 2.047257] sd 12:0:0:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 2.082176] usb 4-2.1: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd [ 2.094725] usb 4-2.1: New USB device found, idVendor=0bc2, idProduct=ab38, bcdDevice= 1.00 [ 2.094728] usb 4-2.1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.094729] usb 4-2.1: Product: Backup+ Hub BK [ 2.094729] usb 4-2.1: Manufacturer: Seagate [ 2.094730] usb 4-2.1: SerialNumber: ... [ 2.094792] checking generic (f1000000 300000) vs hw (f6000000 1000000) [ 2.094794] checking generic (f1000000 300000) vs hw (e8000000 8000000) [ 2.094795] checking generic (f1000000 300000) vs hw (f0000000 2000000) [ 2.094796] fb0: switching to nouveaufb from EFI VGA [ 2.094877] Console: switching to colour dummy device 80x25 [ 2.094916] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 2.094994] nouveau 0000:01:00.0: NVIDIA GK104 (0e4030a2) [ 2.096852] sdj: sdj1 [ 2.098642] scsi host13: uas [ 2.099052] scsi 13:0:0:0: Direct-Access Seagate Backup+ Hub BK D781 PQ: 0 ANSI: 6 [ 2.099562] sd 13:0:0:0: Attached scsi generic sg10 type 0 [ 2.099919] sd 13:0:0:0: [sdk] 15628053167 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 2.099921] sd 13:0:0:0: [sdk] 4096-byte physical blocks [ 2.099998] sd 13:0:0:0: [sdk] Write Protect is off [ 2.100000] sd 13:0:0:0: [sdk] Mode Sense: 4f 00 00 00 [ 2.100161] sd 13:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.100361] sd 13:0:0:0: [sdk] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 2.115917] sd 12:0:0:0: [sdj] Attached SCSI disk [ 2.157173] nouveau 0000:01:00.0: bios: version 80.04.4b.00.0a [ 2.158046] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5 [ 2.187088] sdk: sdk1 [ 2.188034] sd 13:0:0:0: [sdk] Attached SCSI disk [ 2.208168] usb 4-4: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd [ 2.220662] usb 4-4: New USB device found, idVendor=0bc2, idProduct=ab28, bcdDevice= 1.00 [ 2.220663] usb 4-4: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.220664] usb 4-4: Product: BUP SL [ 2.220665] usb 4-4: Manufacturer: Seagate [ 2.220666] usb 4-4: SerialNumber: ... [ 2.223606] scsi host14: uas [ 2.224020] scsi 14:0:0:0: Direct-Access Seagate BUP SL 0304 PQ: 0 ANSI: 6 [ 2.224513] scsi 14:0:0:0: Attached scsi generic sg11 type 0 [ 2.224945] sd 14:0:0:0: [sdl] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.224947] sd 14:0:0:0: [sdl] 4096-byte physical blocks [ 2.225025] sd 14:0:0:0: [sdl] Write Protect is off [ 2.225027] sd 14:0:0:0: [sdl] Mode Sense: 4f 00 00 00 [ 2.225189] sd 14:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.225389] sd 14:0:0:0: [sdl] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 2.229801] [TTM] Zone kernel: Available graphics memory: 4042676 KiB [ 2.229802] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 2.229803] [TTM] Initializing pool allocator [ 2.229808] [TTM] Initializing DMA pool allocator [ 2.229818] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 2.229819] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.229822] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.229824] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.229826] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 2.229827] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000f00 00000000 [ 2.229829] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011f82 00020030 [ 2.229830] nouveau 0000:01:00.0: DRM: DCB outp 03: 02822f62 0f420010 [ 2.229831] nouveau 0000:01:00.0: DRM: DCB outp 05: 04833fb6 0f420010 [ 2.229833] nouveau 0000:01:00.0: DRM: DCB outp 06: 04033f72 00020010 [ 2.229834] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 2.229836] nouveau 0000:01:00.0: DRM: DCB conn 01: 00020131 [ 2.229837] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261 [ 2.229838] nouveau 0000:01:00.0: DRM: DCB conn 03: 00010346 [ 2.229839] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000460 [ 2.231481] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 2.285208] usb 4-1.3: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd [ 2.298929] usb 4-1.3: New USB device found, idVendor=0bc2, idProduct=331a, bcdDevice= 9.15 [ 2.298931] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.298932] usb 4-1.3: Product: Expansion Desk [ 2.298933] usb 4-1.3: Manufacturer: Seagate [ 2.298934] usb 4-1.3: SerialNumber: ... [ 2.303145] scsi host15: uas [ 2.303567] scsi 15:0:0:0: Direct-Access Seagate Expansion Desk 0915 PQ: 0 ANSI: 6 [ 2.305059] sd 15:0:0:0: [sdm] 11721045167 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 2.305062] sd 15:0:0:0: [sdm] 4096-byte physical blocks [ 2.305692] sd 15:0:0:0: [sdm] Write Protect is off [ 2.305694] sd 15:0:0:0: [sdm] Mode Sense: 53 00 00 08 [ 2.305982] sd 15:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.306229] sd 15:0:0:0: [sdm] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 2.306336] sd 15:0:0:0: Attached scsi generic sg12 type 0 [ 2.325355] sdm: sdm1 [ 2.326662] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.5/input2 [ 2.326713] sd 15:0:0:0: [sdm] Attached SCSI disk [ 2.363173] usb 4-2.2: new SuperSpeed Gen 1 USB device number 10 using xhci_hcd [ 2.375769] usb 4-2.2: New USB device found, idVendor=1058, idProduct=25ee, bcdDevice=40.04 [ 2.375771] usb 4-2.2: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.375771] usb 4-2.2: Product: My Book 25EE [ 2.375772] usb 4-2.2: Manufacturer: Western Digital [ 2.375773] usb 4-2.2: SerialNumber: ... [ 2.376790] usb-storage 4-2.2:1.0: USB Mass Storage device detected [ 2.377281] scsi host16: usb-storage 4-2.2:1.0 [ 2.418781] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0xa0000, bo 000000009068c4cf [ 2.418833] fbcon: nouveaudrmfb (fb0) is primary device [ 2.433167] input: Logitech Wireless Device PID:1017 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:1017.0004/input/input10 [ 2.433255] hid-generic 0003:046D:1017.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:1017] on usb-0000:00:1a.0-1.5/input2:1 [ 2.435206] input: Logitech Wireless Device PID:402d Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0005/input/input14 [ 2.435342] input: Logitech Wireless Device PID:402d Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0005/input/input15 [ 2.435412] hid-generic 0003:046D:402D.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:402d] on usb-0000:00:1a.0-1.5/input2:2 [ 2.437263] input: Logitech Wireless Device PID:400e Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:400E.0006/input/input19 [ 2.437394] input: Logitech Wireless Device PID:400e Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:400E.0006/input/input20 [ 2.437476] input: Logitech Wireless Device PID:400e Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:400E.0006/input/input21 [ 2.437523] hid-generic 0003:046D:400E.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:400e] on usb-0000:00:1a.0-1.5/input2:3 [ 2.442169] usb 4-2.3: new SuperSpeed Gen 1 USB device number 11 using xhci_hcd [ 2.455767] usb 4-2.3: New USB device found, idVendor=0bc2, idProduct=3322, bcdDevice= 1.00 [ 2.455769] usb 4-2.3: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.455770] usb 4-2.3: Product: Expansion Desk [ 2.455771] usb 4-2.3: Manufacturer: Seagate [ 2.455771] usb 4-2.3: SerialNumber: ... [ 2.460268] scsi host17: uas [ 2.460671] scsi 17:0:0:0: Direct-Access Seagate Expansion Desk 9401 PQ: 0 ANSI: 6 [ 2.461210] sd 17:0:0:0: Attached scsi generic sg13 type 0 [ 2.461572] sd 17:0:0:0: [sdn] 11721045167 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 2.461574] sd 17:0:0:0: [sdn] 4096-byte physical blocks [ 2.461651] sd 17:0:0:0: [sdn] Write Protect is off [ 2.461652] sd 17:0:0:0: [sdn] Mode Sense: 4f 00 00 00 [ 2.461810] sd 17:0:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.462009] sd 17:0:0:0: [sdn] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 2.522994] input: Logitech Anywhere MX as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:1017.0004/input/input25 [ 2.523084] logitech-hidpp-device 0003:046D:1017.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Anywhere MX] on usb-0000:00:1a.0-1.5/input2:1 [ 2.597366] Console: switching to colour frame buffer device 240x67 [ 2.598872] sdl: sdl1 sdl2 [ 2.599844] sd 14:0:0:0: [sdl] Attached SCSI disk [ 2.600979] logitech-hidpp-device 0003:046D:402D.0005: hidraw2: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:1a.0-1.5/input2:2 [ 2.628934] sdn: sdn1 [ 2.629878] sd 17:0:0:0: [sdn] Attached SCSI disk [ 2.726965] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 2.732426] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 2.831089] input: Logitech K400 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:400E.0006/input/input26 [ 2.831273] logitech-hidpp-device 0003:046D:400E.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:1a.0-1.5/input2:3 [ 3.407402] scsi 16:0:0:0: Direct-Access WD My Book 25EE 4004 PQ: 0 ANSI: 6 [ 3.407583] scsi 16:0:0:1: Enclosure WD SES Device 4004 PQ: 0 ANSI: 6 [ 3.408667] sd 16:0:0:0: Attached scsi generic sg14 type 0 [ 3.408772] scsi 16:0:0:1: Attached scsi generic sg15 type 13 [ 3.408833] sd 16:0:0:0: [sdo] Very big device. Trying to use READ CAPACITY(16). [ 3.408956] sd 16:0:0:0: [sdo] 15628052480 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 3.408958] sd 16:0:0:0: [sdo] 4096-byte physical blocks [ 3.409161] sd 16:0:0:0: [sdo] Write Protect is off [ 3.409164] sd 16:0:0:0: [sdo] Mode Sense: 47 00 10 08 [ 3.409354] sd 16:0:0:0: [sdo] No Caching mode page found [ 3.409356] sd 16:0:0:0: [sdo] Assuming drive cache: write through [ 3.456732] sdo: sdo1 [ 3.457548] sd 16:0:0:0: [sdo] Attached SCSI disk [ 10.329298] sdh: sdh1 [ 10.331886] sd 9:0:0:0: [sdh] Attached SCSI disk [ 10.828442] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled [ 10.830624] XFS (dm-0): Mounting V5 Filesystem [ 10.851009] XFS (dm-0): Ending clean mount [ 11.416124] SELinux: Permission watch in class filesystem not defined in policy. [ 11.416128] SELinux: Permission watch in class file not defined in policy. [ 11.416129] SELinux: Permission watch_mount in class file not defined in policy. [ 11.416129] SELinux: Permission watch_sb in class file not defined in policy. [ 11.416130] SELinux: Permission watch_with_perm in class file not defined in policy. [ 11.416130] SELinux: Permission watch_reads in class file not defined in policy. [ 11.416132] SELinux: Permission watch in class dir not defined in policy. [ 11.416134] SELinux: Permission watch_mount in class dir not defined in policy. [ 11.416135] SELinux: Permission watch_sb in class dir not defined in policy. [ 11.416135] SELinux: Permission watch_with_perm in class dir not defined in policy. [ 11.416136] SELinux: Permission watch_reads in class dir not defined in policy. [ 11.416138] SELinux: Permission watch in class lnk_file not defined in policy. [ 11.416138] SELinux: Permission watch_mount in class lnk_file not defined in policy. [ 11.416139] SELinux: Permission watch_sb in class lnk_file not defined in policy. [ 11.416139] SELinux: Permission watch_with_perm in class lnk_file not defined in policy. [ 11.416140] SELinux: Permission watch_reads in class lnk_file not defined in policy. [ 11.416141] SELinux: Permission watch in class chr_file not defined in policy. [ 11.416142] SELinux: Permission watch_mount in class chr_file not defined in policy. [ 11.416142] SELinux: Permission watch_sb in class chr_file not defined in policy. [ 11.416143] SELinux: Permission watch_with_perm in class chr_file not defined in policy. [ 11.416143] SELinux: Permission watch_reads in class chr_file not defined in policy. [ 11.416144] SELinux: Permission watch in class blk_file not defined in policy. [ 11.416144] SELinux: Permission watch_mount in class blk_file not defined in policy. [ 11.416145] SELinux: Permission watch_sb in class blk_file not defined in policy. [ 11.416145] SELinux: Permission watch_with_perm in class blk_file not defined in policy. [ 11.416146] SELinux: Permission watch_reads in class blk_file not defined in policy. [ 11.416147] SELinux: Permission watch in class sock_file not defined in policy. [ 11.416147] SELinux: Permission watch_mount in class sock_file not defined in policy. [ 11.416148] SELinux: Permission watch_sb in class sock_file not defined in policy. [ 11.416148] SELinux: Permission watch_with_perm in class sock_file not defined in policy. [ 11.416149] SELinux: Permission watch_reads in class sock_file not defined in policy. [ 11.416150] SELinux: Permission watch in class fifo_file not defined in policy. [ 11.416150] SELinux: Permission watch_mount in class fifo_file not defined in policy. [ 11.416151] SELinux: Permission watch_sb in class fifo_file not defined in policy. [ 11.416151] SELinux: Permission watch_with_perm in class fifo_file not defined in policy. [ 11.416152] SELinux: Permission watch_reads in class fifo_file not defined in policy. [ 11.416179] SELinux: Permission perfmon in class capability2 not defined in policy. [ 11.416179] SELinux: Permission bpf in class capability2 not defined in policy. [ 11.416180] SELinux: Permission checkpoint_restore in class capability2 not defined in policy. [ 11.416184] SELinux: Permission perfmon in class cap2_userns not defined in policy. [ 11.416184] SELinux: Permission bpf in class cap2_userns not defined in policy. [ 11.416185] SELinux: Permission checkpoint_restore in class cap2_userns not defined in policy. [ 11.416203] SELinux: Class perf_event not defined in policy. [ 11.416203] SELinux: Class lockdown not defined in policy. [ 11.416204] SELinux: the above unknown classes and permissions will be allowed [ 11.418081] SELinux: policy capability network_peer_controls=1 [ 11.418082] SELinux: policy capability open_perms=1 [ 11.418082] SELinux: policy capability extended_socket_class=1 [ 11.418083] SELinux: policy capability always_check_network=0 [ 11.418083] SELinux: policy capability cgroup_seclabel=1 [ 11.418083] SELinux: policy capability nnp_nosuid_transition=1 [ 11.418084] SELinux: policy capability genfs_seclabel_symlinks=0 [ 11.444654] systemd[1]: Successfully loaded SELinux policy in 114.082ms. [ 11.453348] systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time. [ 11.509052] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 34.052ms. [ 11.514361] systemd[1]: systemd v246.10-1.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 11.526299] systemd[1]: Detected architecture x86-64. [ 11.527194] systemd[1]: Set hostname to ... [ 11.703451] zram_generator::generator[663]: Creating dev-zram0.swap for /dev/zram0 (3947MB) [ 11.714197] zram: Added device: zram0 [ 11.767681] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 11.815954] systemd[1]: /usr/lib/systemd/system/alsa-restore.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 11.832461] systemd[1]: /usr/lib/systemd/system/mcelog.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 11.966967] systemd[1]: initrd-switch-root.service: Succeeded. [ 11.967123] systemd[1]: Stopped Switch Root. [ 11.967538] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 11.967768] systemd[1]: Created slice Virtual Machine and Container Slice. [ 11.967974] systemd[1]: Created slice system-getty.slice. [ 11.968178] systemd[1]: Created slice system-modprobe.slice. [ 11.968371] systemd[1]: Created slice system-swap\x2dcreate.slice. [ 11.968567] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 11.968784] systemd[1]: Created slice User and Session Slice. [ 11.968814] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 11.968937] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.969358] systemd[1]: Set up automount ... [ 11.969397] systemd[1]: Reached target Local Encrypted Volumes. [ 11.969421] systemd[1]: Reached target Login Prompts. [ 11.969450] systemd[1]: Stopped target Switch Root. [ 11.969477] systemd[1]: Stopped target Initrd File Systems. [ 11.969498] systemd[1]: Stopped target Initrd Root File System. [ 11.969541] systemd[1]: Reached target Paths. [ 11.969573] systemd[1]: Reached target Slices. [ 11.969998] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 11.970764] systemd[1]: Listening on LVM2 poll daemon socket. [ 11.971400] systemd[1]: Listening on multipathd control socket. [ 11.972669] systemd[1]: Listening on Process Core Dump Socket. [ 11.972797] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 11.973565] systemd[1]: Listening on udev Control Socket. [ 11.973838] systemd[1]: Listening on udev Kernel Socket. [ 11.974390] systemd[1]: Listening on User Database Manager Socket. [ 11.975246] systemd[1]: Mounting Huge Pages File System... [ 11.976234] systemd[1]: Mounting POSIX Message Queue File System... [ 11.977204] systemd[1]: Mounting Kernel Debug File System... [ 11.977371] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 11.978546] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 11.979729] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 11.980965] systemd[1]: Starting Load Kernel Module configfs... [ 11.981803] systemd[1]: Starting Load Kernel Module drm... [ 11.982694] systemd[1]: Starting Load Kernel Module fuse... [ 11.983900] systemd[1]: Starting Preprocess NFS configuration convertion... [ 11.984138] systemd[1]: plymouth-switch-root.service: Succeeded. [ 11.984351] systemd[1]: Stopped Plymouth switch root service. [ 11.984609] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 11.984742] systemd[1]: systemd-fsck-root.service: Succeeded. [ 11.984905] systemd[1]: Stopped File System Check on Root Device. [ 11.984997] systemd[1]: Stopped Journal Service. [ 11.986567] systemd[1]: Starting Journal Service... [ 11.987645] systemd[1]: Starting Load Kernel Modules... [ 11.988640] systemd[1]: Starting Remount Root and Kernel File Systems... [ 11.988758] systemd[1]: Condition check resulted in Repartition Root Disk being skipped. [ 11.989906] systemd[1]: Starting Coldplug All udev Devices... [ 11.991325] systemd[1]: sysroot.mount: Succeeded. [ 11.992333] systemd[1]: Mounted Huge Pages File System. [ 11.992562] systemd[1]: Mounted POSIX Message Queue File System. [ 11.992761] systemd[1]: Mounted Kernel Debug File System. [ 11.993213] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 11.993634] systemd[1]: XXX@XXX: Succeeded. [ 11.993912] systemd[1]: Finished Load Kernel Module configfs. [ 11.994355] systemd[1]: XXX@XXX: Succeeded. [ 11.994617] systemd[1]: Finished Load Kernel Module drm. [ 11.995125] systemd[1]: XXX@XXX: Succeeded. [ 11.995399] systemd[1]: Finished Load Kernel Module fuse. [ 11.995970] systemd[1]: nfs-convert.service: Succeeded. [ 11.996227] systemd[1]: Finished Preprocess NFS configuration convertion. [ 11.998155] systemd[1]: Mounting FUSE Control File System... [ 12.000070] systemd[1]: Mounting Kernel Configuration File System... [ 12.001403] systemd[1]: Finished Load Kernel Modules. [ 12.001635] systemd[1]: Mounted FUSE Control File System. [ 12.002121] systemd[1]: Mounted Kernel Configuration File System. [ 12.003377] systemd[1]: Starting Apply Kernel Variables... [ 12.004443] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 12.005673] systemd[1]: Finished Remount Root and Kernel File Systems. [ 12.005895] systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped. [ 12.005944] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 12.006220] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 12.007107] systemd[1]: Starting Load/Save Random Seed... [ 12.007238] systemd[1]: Condition check resulted in Create System Users being skipped. [ 12.008375] systemd[1]: Starting Create Static Device Nodes in /dev... [ 12.022832] systemd[1]: Finished Load/Save Random Seed. [ 12.023240] systemd[1]: Started Journal Service. [ 12.264648] parport_pc 00:06: reported by Plug and Play ACPI [ 12.264713] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 12.312252] EDAC ie31200: No ECC support [ 12.312295] EDAC ie31200: No ECC support [ 12.406810] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200925/utaddress-204) [ 12.406818] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.406821] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 12.406825] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.406826] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 12.406830] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.406831] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\LED) (20200925/utaddress-204) [ 12.406835] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 12.406839] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.406840] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.443973] scsi 16:0:0:1: Wrong diagnostic page; asked for 1 got 8 [ 12.443977] scsi 16:0:0:1: Failed to get diagnostic page 0x1 [ 12.443980] scsi 16:0:0:1: Failed to bind enclosure -19 [ 12.444010] ses 16:0:0:1: Attached Enclosure device [ 12.445672] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 12.445907] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 12.446245] i2c i2c-13: 1/4 memory slots populated (from DMI) [ 12.449877] i2c i2c-13: Successfully instantiated SPD at 0x53 [ 12.528410] zram0: detected capacity change from 0 to 4138729472 [ 12.534272] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer [ 12.534274] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 12.534274] RAPL PMU: hw unit of domain package 2^-16 Joules [ 12.573336] Adding 4041724k swap on /dev/zram0. Priority:100 extents:1 across:4041724k SSFS [ 12.585003] ppdev: user-space parallel port driver [ 12.592123] iTCO_vendor_support: vendor-support=0 [ 12.596401] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 12.596446] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 12.616782] at24 13-0053: supply vcc not found, using dummy regulator [ 12.616849] intel_rapl_common: Found RAPL domain package [ 12.616851] intel_rapl_common: Found RAPL domain core [ 12.617348] at24 13-0053: 256 byte spd EEPROM, read-only [ 12.644308] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 12.644578] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 12.644625] snd_hda_intel 0000:01:00.1: Disabling MSI [ 12.644630] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 12.665603] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau]) [ 12.692055] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27 [ 12.692156] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28 [ 12.692215] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29 [ 12.692275] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30 [ 12.692332] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input31 [ 12.692390] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input32 [ 12.692443] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input33 [ 12.692990] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 12.692993] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.692994] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 12.692996] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 12.692997] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x0 [ 12.692998] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 12.692999] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 12.693000] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 12.693002] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 12.693003] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 12.715010] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34 [ 12.715069] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35 [ 12.715117] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36 [ 12.715171] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input37 [ 12.715245] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save denylist, forcing power_save to 0 [ 12.771611] XFS (sda2): Mounting V5 Filesystem [ 12.781926] XFS (sda2): Ending clean mount [ 12.785069] xfs filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 12.847561] EXT4-fs (sdc1): warning: mounting fs with errors, running e2fsck is recommended [ 12.892285] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 12.895701] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 13.040671] RPC: Registered named UNIX socket transport module. [ 13.040673] RPC: Registered udp transport module. [ 13.040674] RPC: Registered tcp transport module. [ 13.040674] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.032615] RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 14.254169] r8169 0000:03:00.0 enp3s0: Link is Down [ 17.312109] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 17.312119] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 17.583555] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 17.585976] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 17.593692] tun: Universal TUN/TAP device driver, 1.6 [ 17.594992] virbr0: port 1(virbr0-nic) entered blocking state [ 17.594994] virbr0: port 1(virbr0-nic) entered disabled state [ 17.595050] device virbr0-nic entered promiscuous mode [ 18.675776] virbr0: port 1(virbr0-nic) entered blocking state [ 18.675782] virbr0: port 1(virbr0-nic) entered listening state [ 18.709050] virbr0: port 1(virbr0-nic) entered disabled state [ 22.486840] logitech-hidpp-device 0003:046D:400E.0006: HID++ 2.0 device connected. [ 26.999554] rfkill: input handler disabled [ 27.073406] EXT4-fs (sdn1): mounted filesystem with ordered data mode. Opts: (null) [ 27.142451] EXT4-fs (sdm1): mounted filesystem with ordered data mode. Opts: (null) [ 27.215678] EXT4-fs (sdo1): mounted filesystem with ordered data mode. Opts: (null) [ 27.269117] EXT4-fs (sdi1): mounted filesystem with ordered data mode. Opts: (null) [ 27.284325] EXT4-fs (sdj1): mounted filesystem with ordered data mode. Opts: (null) [ 27.358529] EXT4-fs (sdk1): mounted filesystem with ordered data mode. Opts: (null) [ 27.437301] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null) [ 27.544682] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve4_fuc084 failed with error -2 [ 27.544703] nouveau 0000:01:00.0: Direct firmware load for nouveau/nve4_fuc084d failed with error -2 [ 27.544711] nouveau 0000:01:00.0: msvld: unable to load firmware data [ 27.544713] nouveau 0000:01:00.0: msvld: init failed, -19 [ 27.751194] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [ 28.125170] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 41.829797] EXT4-fs warning (device sdh1): ext4_clear_journal_err:5610: Filesystem error recorded from previous mount: IO failure [ 41.829801] EXT4-fs warning (device sdh1): ext4_clear_journal_err:5612: Marking fs in need of filesystem check. [ 41.893383] EXT4-fs (sdh1): warning: mounting fs with errors, running e2fsck is recommended [ 41.952547] EXT4-fs (sdh1): recovery complete [ 41.971882] EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null) [ 83.106402] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.110396] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.120402] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.136399] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.142412] logitech-hidpp-device 0003:046D:402D.0005: HID++ 2.0 device connected. [ 83.148373] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.164402] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.180402] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.198385] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.212406] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.326404] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.566400] logitech-hidpp-device 0003:046D:402D.0005: error in parameter [ 83.588494] input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:046D:C52B.0003/0003:046D:402D.0005/input/input38 [ 332.872045] EXT4-fs (sdc1): error count since last fsck: 1632 [ 332.872058] EXT4-fs (sdc1): initial error at time 1605001518: ext4_journal_check_start:83 [ 332.872062] EXT4-fs (sdc1): last error at time 1611571140: ext4_mb_free_metaXXXX:5126: block 1316955135 [ 365.639536] EXT4-fs (sdh1): error count since last fsck: 5 [ 365.639551] EXT4-fs (sdh1): initial error at time 1612403162: ext4_journal_check_start:83 [ 365.639557] EXT4-fs (sdh1): last error at time 1612403210: mpage_map_and_submit_extent:2512 [ 2757.748709] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 2757.748720] nouveau 0000:01:00.0: fifo: runlist 0: scheduled for recovery [ 2757.748727] nouveau 0000:01:00.0: fifo: channel 5: killed [ 2757.748732] nouveau 0000:01:00.0: fifo: engine 7: scheduled for recovery [ 2757.748734] nouveau 0000:01:00.0: fifo: engine 0: scheduled for recovery [ 2757.748750] nouveau 0000:01:00.0: fifo: fault 00 [READ] at 0000000022002000 engine 00 [GR] client 16 [GPC0/L1_5] reason 02 [PTE] on channel -1 [10010082000 unknown] [ 2757.748755] nouveau 0000:01:00.0: fifo: fault 00 [READ] at 0000000022002000 engine 1b [CE2] client 16 [GPC0/L1_5] reason 02 [PTE] on channel -1 [10010082000 unknown] [ 2757.749238] nouveau 0000:01:00.0: Xorg[1294]: channel 5 killed! [ 5096.383540] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] [ 5096.383553] nouveau 0000:01:00.0: fifo: runlist 0: scheduled for recovery [ 5096.383566] nouveau 0000:01:00.0: fifo: channel 3: killed [ 5096.383572] nouveau 0000:01:00.0: fifo: engine 0: scheduled for recovery [ 5096.383606] nouveau 0000:01:00.0: fifo: fault 00 [READ] at 0000000022002000 engine 00 [GR] client 16 [GPC0/L1_5] reason 02 [PTE] on channel -1 [10010082000 unknown] [ 5096.384134] nouveau 0000:01:00.0: Xorg[1294]: channel 3 killed! [ 5455.347743] zram_generator::generator[8404]: Creating dev-zram0.swap for /dev/zram0 (3947MB) [ 5479.309549] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 5482.774751] r8169 0000:03:00.0: invalid short VPD tag 00 at offset 1