[...] ERROR: ld.so: object '/usr/lib/arm-linux-gnueabihf/libarmmem-${PLATFORM}.so' from /etc/ld.so.preload cannot be preloaded (cannot open shared object file): ignored. [...] [ 0.000000] Booting Linux on physical CPU 0x0 [...] [ 0.000000] Linux version 5.10.17-v7+ (XXX@XXX) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1421 SMP Thu May 27 13:59:01 BST 2021 [...] [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [...] [ 0.000000] CPU: div instructions available: patching division code [...] [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [...] [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [...] [ 0.000000] Memory policy: Data cache writealloc [...] [ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB [...] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [...] [ 0.000000] Zone ranges: [...] [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff] [...] [ 0.000000] Normal empty [...] [ 0.000000] Movable zone start for each node [...] [ 0.000000] Early memory node ranges [...] [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [...] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [...] [ 0.000000] On node 0 totalpages: 242688 [...] [ 0.000000] DMA zone: 2133 pages used for memmap [...] [ 0.000000] DMA zone: 0 pages reserved [...] [ 0.000000] DMA zone: 242688 pages, LIFO batch:63 [...] [ 0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920 [...] [ 0.000000] pcpu-alloc: s50700 r8192 d23028 u81920 alloc=20*4096 [...] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [...] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [...] [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [...] [ 0.000000] Kernel parameter elevator= does not have any effect anymore. [...] [ 0.000000] Please use sysfs to set IO scheduler for individual devices. [...] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [...] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [...] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [...] [ 0.000000] Memory: 879832K/970752K available (9216K kernel code, 1311K rwdata, 2940K rodata, 1024K init, 860K bss, 25384K reserved, 65536K cma-reserved) [...] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [...] [ 0.000000] ftrace: allocating 31910 entries in 63 pages [...] [ 0.000000] ftrace: allocated 63 pages with 6 groups [...] [ 0.000000] rcu: Hierarchical RCU implementation. [...] [ 0.000000] Rude variant of Tasks RCU enabled. [...] [ 0.000000] Tracing variant of Tasks RCU enabled. [...] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [...] [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [...] [ 0.000000] random: get_random_bytes called from start_kernel+0x3ac/0x580 with crng_init=0 [...] [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [...] [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [...] [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [...] [ 0.000021] Switching to timer-based delay loop, resolution 52ns [...] [ 0.000307] Console: colour dummy device 80x30 [...] [ 0.000380] printk: console [tty1] enabled [...] [ 0.000432] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [...] [ 0.000461] pid_max: default: 32768 minimum: 301 [...] [ 0.000676] LSM: Security Framework initializing [...] [ 0.000915] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [...] [ 0.000938] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [...] [ 0.002530] Disabling memory control group subsystem [...] [ 0.002649] CPU: Testing write buffer coherency: ok [...] [ 0.003144] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [...] [ 0.004382] Setting up static identity map for 0x100000 - 0x10003c [...] [ 0.004567] rcu: Hierarchical SRCU implementation. [...] [ 0.005489] smp: Bringing up secondary CPUs ... [...] [ 0.006663] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [...] [ 0.007958] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [...] [ 0.009179] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [...] [ 0.009337] smp: Brought up 1 node, 4 CPUs [...] [ 0.009360] SMP: Total of 4 processors activated (153.60 BogoMIPS). [...] [ 0.009372] CPU: All CPU(s) started in HYP mode. [...] [ 0.009383] CPU: Virtualization extensions available. [...] [ 0.010488] devtmpfs: initialized [...] [ 0.028158] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [...] [ 0.028409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [...] [ 0.028439] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [...] [ 0.031674] pinctrl core: initialized pinctrl subsystem [...] [ 0.032850] NET: Registered protocol family 16 [...] [ 0.037300] DMA: preallocated 1024 KiB pool for atomic coherent allocations [...] [ 0.043959] thermal_sys: Registered thermal governor 'step_wise' [...] [ 0.045124] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [...] [ 0.045139] hw-breakpoint: maximum watchpoint size is 8 bytes. [...] [ 0.045424] Serial: AMBA PL011 UART driver [...] [ 0.063349] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [...] [ 0.080122] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-05-27T14:04:13, variant start [...] [ 0.090133] raspberrypi-firmware soc:firmware: Firmware hash is 7d9a298cda813f747b51fe17e1e417e7bf5ca94d [...] [ 0.139213] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [...] [ 0.141717] SCSI subsystem initialized [...] [ 0.141981] usbcore: registered new interface driver usbfs [...] [ 0.142046] usbcore: registered new interface driver hub [...] [ 0.142117] usbcore: registered new device driver usb [...] [ 0.144259] clocksource: Switched to clocksource arch_sys_counter [...] [ 1.921390] VFS: Disk quotas dquot_6.6.0 [...] [ 1.921511] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [...] [ 1.921714] FS-Cache: Loaded [...] [ 1.921999] CacheFiles: Loaded [...] [ 1.932736] NET: Registered protocol family 2 [...] [ 1.933840] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [...] [ 1.933984] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [...] [ 1.934103] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [...] [ 1.934335] TCP: Hash tables configured (established 8192 bind 8192) [...] [ 1.934534] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [...] [ 1.934591] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [...] [ 1.934927] NET: Registered protocol family 1 [...] [ 1.935725] RPC: Registered named UNIX socket transport module. [...] [ 1.935738] RPC: Registered udp transport module. [...] [ 1.935751] RPC: Registered tcp transport module. [...] [ 1.935763] RPC: Registered tcp NFSv4.1 backchannel transport module. [...] [ 1.937606] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [...] [ 1.941407] Initialise system trusted keyrings [...] [ 1.941683] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [...] [ 1.951241] zbud: loaded [...] [ 1.953333] FS-Cache: Netfs 'nfs' registered for caching [...] [ 1.954203] NFS: Registering the id_resolver key type [...] [ 1.954344] Key type id_resolver registered [...] [ 1.954358] Key type id_legacy registered [...] [ 1.954530] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [...] [ 1.955700] Key type asymmetric registered [...] [ 1.955715] Asymmetric key parser 'x509' registered [...] [ 1.955770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [...] [ 1.955785] io scheduler mq-deadline registered [...] [ 1.955798] io scheduler kyber registered [...] [ 1.960688] bcm2708_fb soc:fb: FB found 1 display(s) [...] [ 1.995515] Console: switching to colour frame buffer device 228x61 [...] [ 2.025966] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984 [...] [ 2.031636] bcm2835-rng 3f104000.rng: hwrng registered [...] [ 2.032101] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [...] [ 2.032959] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [...] [ 2.045536] brd: module loaded [...] [ 2.058013] loop: module loaded [...] [ 2.059684] Loading iSCSI transport class v2.0-870. [...] [ 2.061383] libphy: Fixed MDIO Bus: probed [...] [ 2.061704] usbcore: registered new interface driver lan78xx [...] [ 2.061774] usbcore: registered new interface driver smsc95xx [...] [ 2.061801] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [...] [ 2.790063] Core Release: 2.80a [...] [ 2.790081] Setting default values for core params [...] [ 2.790115] Finished setting default values for core params [...] [ 2.990506] Using Buffer DMA mode [...] [ 2.990520] Periodic Transfer Interrupt Enhancement - disabled [...] [ 2.990533] Multiprocessor Interrupt Enhancement - disabled [...] [ 2.990546] OTG VER PARAM: 0, OTG VER FLAG: 0 [...] [ 2.990563] Dedicated Tx FIFOs mode [...] [...] [ 2.991229] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024 [...] [ 2.991265] FIQ FSM acceleration enabled for : [...] [ 2.991265] Non-periodic Split Transactions [...] [ 2.991265] Periodic Split Transactions [...] [ 2.991265] High-Speed Isochronous Endpoints [...] [ 2.991265] Interrupt/Control Split Transaction hack enabled [...] [ 2.991279] dwc_otg: Microframe scheduler enabled [...] [...] [ 2.991357] WARN::hcd_init_fiq:457: FIQ on core 1 [...] [...] [ 2.991375] WARN::hcd_init_fiq:458: FIQ ASM at 807be568 length 36 [...] [...] [ 2.991393] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [...] [ 2.991418] dwc_otg 3f980000.usb: DWC OTG Controller [...] [ 2.991457] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [...] [ 2.991546] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [...] [ 2.991605] Init: Port Power? op_state=1 [...] [ 2.991617] Init: Power Port (0) [...] [ 2.991983] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [...] [ 2.992002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [...] [ 2.992019] usb usb1: Product: DWC OTG Controller [...] [ 2.992035] usb usb1: Manufacturer: Linux 5.10.17-v7+ dwc_otg_hcd [...] [ 2.992050] usb usb1: SerialNumber: ... [...] [ 2.992857] hub 1-0:1.0: USB hub found [...] [ 2.992924] hub 1-0:1.0: 1 port detected [...] [ 2.994041] dwc_otg: FIQ enabled [...] [ 2.994054] dwc_otg: NAK holdoff enabled [...] [ 2.994066] dwc_otg: FIQ split-transaction FSM enabled [...] [ 2.994085] Module dwc_common_port init [...] [ 2.994556] usbcore: registered new interface driver usb-storage [...] [ 2.994815] mousedev: PS/2 mouse device common for all mice [...] [ 2.996073] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [...] [ 2.999071] sdhci: Secure Digital Host Controller Interface driver [...] [ 2.999085] sdhci: Copyright(c) Pierre Ossman [...] [ 2.999756] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe [...] [ 3.000457] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [...] [ 3.000689] sdhci-pltfm: SDHCI platform and OF driver helper [...] [ 3.002563] ledtrig-cpu: registered to indicate activity on CPUs [...] [ 3.002997] hid: raw HID events driver (C) Jiri Kosina [...] [ 3.003160] usbcore: registered new interface driver usbhid [...] [ 3.003172] usbhid: USB HID core driver [...] [ 3.008659] Initializing XFRM netlink socket [...] [ 3.008710] NET: Registered protocol family 17 [...] [ 3.008886] Key type dns_resolver registered [...] [ 3.009706] Registering SWP/SWPB emulation handler [...] [ 3.009875] registered taskstats version 1 [...] [ 3.009906] Loading compiled-in X.509 certificates [...] [ 3.010887] Key type ._fscrypt registered [...] [ 3.010902] Key type .fscrypt registered [...] [ 3.010914] Key type fscrypt-provisioning registered [...] [ 3.022540] uart-pl011 3f201000.serial: cts_event_workaround enabled [...] [ 3.022653] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [...] [ 3.025207] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [...] [ 3.026965] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [...] [ 3.026982] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [...] [ 3.053890] sdhost: log_buf @ (ptrval) (f7507000) [...] [ 3.090725] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [...] [ 3.092390] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [...] [ 3.094053] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [...] [ 3.097041] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [...] [ 3.103195] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [...] [ 3.106360] of_cfs_init [...] [ 3.106675] of_cfs_init: OK [...] [ 3.107920] Waiting for root device PARTUUID=97709164-02... [...] [ 3.163272] random: fast init done [...] [ 3.191414] mmc0: host does not support reading read-only switch, assuming write-enable [...] [ 3.195756] mmc0: new high speed SDHC card at address aaaa [...] [ 3.196930] mmcblk0: mmc0:aaaa SS32G 29.7 GiB [...] [ 3.200892] mmcblk0: p1 p2 [...] [ 3.204543] Indeed it is in host mode hprt0 = 00021501 [...] [ 3.218888] mmc1: new high speed SDIO card at address 0001 [...] [ 3.279164] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [...] [ 3.279286] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [...] [ 3.287256] devtmpfs: mounted [...] [ 3.294425] Freeing unused kernel memory: 1024K [...] [ 3.314765] Run /sbin/init as init process [...] [ 3.314777] with arguments: [...] [ 3.314789] /sbin/init [...] [ 3.314800] splash [...] [ 3.314812] with environment: [...] [ 3.314823] HOME=/ [...] [ 3.314834] TERM=linux [...] [ 3.424331] usb 1-1: new high-speed USB device number 2 using dwc_otg [...] [ 3.424519] Indeed it is in host mode hprt0 = 00001101 [...] [ 3.674735] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [...] [ 3.674757] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [...] [ 3.675784] hub 1-1:1.0: USB hub found [...] [ 3.675894] hub 1-1:1.0: 5 ports detected [...] [ 4.004331] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [...] [ 4.018561] systemd[1]: System time before build time, advancing clock. [...] [ 4.134661] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [...] [ 4.134688] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [...] [ 4.137615] smsc95xx v2.0.0 [...] [ 4.166113] NET: Registered protocol family 10 [...] [ 4.167683] Segment Routing with IPv6 [...] [ 4.235395] libphy: smsc95xx-mdiobus: probed [...] [ 4.239089] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, XX:XX:XX:XX:XX:XX [...] [ 4.269494] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [...] [ 4.270759] systemd[1]: Detected architecture arm. [...] [ 4.334323] usb 1-1.4: new full-speed USB device number 4 using dwc_otg [...] [ 4.338405] systemd[1]: Set hostname to ... [...] [ 4.468534] usb 1-1.4: New USB device found, idVendor=413c, idProduct=1003, bcdDevice= 2.00 [...] [ 4.468560] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [...] [ 4.468580] usb 1-1.4: Product: Dell USB Keyboard Hub [...] [ 4.468596] usb 1-1.4: Manufacturer: Dell [...] [ 4.472392] hub 1-1.4:1.0: USB hub found [...] [ 4.473050] hub 1-1.4:1.0: 3 ports detected [...] [ 4.574418] usb 1-1.5: new low-speed USB device number 5 using dwc_otg [...] [ 4.708793] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=6019, bcdDevice= 1.00 [...] [ 4.708821] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=... [...] [ 4.708838] usb 1-1.5: Product: Lenovo Optical USB Mouse [...] [ 4.716375] input: Lenovo Optical USB Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:17EF:6019.0001/input/input0 [...] [ 4.716963] hid-generic 0003:17EF:6019.0001: input,hidraw0: USB HID v1.11 Mouse [Lenovo Optical USB Mouse] on usb-3f980000.usb-1.5/input0 [...] [ 4.814335] usb 1-1.4.1: new full-speed USB device number 6 using dwc_otg [...] [ 4.958662] usb 1-1.4.1: New USB device found, idVendor=413c, idProduct=2010, bcdDevice= 2.00 [...] [ 4.958688] usb 1-1.4.1: New USB device strings: Mfr=1, Product=3, SerialNumber=... [...] [ 4.958705] usb 1-1.4.1: Product: Dell USB Keyboard [...] [ 4.958720] usb 1-1.4.1: Manufacturer: Dell [...] [ 4.965954] input: Dell Dell USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/0003:413C:2010.0002/input/input1 [...] [ 5.035351] hid-generic 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-3f980000.usb-1.4.1/input0 [...] [ 5.043555] input: Dell Dell USB Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.1/0003:413C:2010.0003/input/input2 [...] [ 5.114884] input: Dell Dell USB Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.1/0003:413C:2010.0003/input/input3 [...] [ 5.115222] hid-generic 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-3f980000.usb-1.4.1/input1 [...] [ 5.460389] random: systemd: uninitialized urandom read (16 bytes read) [...] [ 5.477385] random: systemd: uninitialized urandom read (16 bytes read) [...] [ 5.481136] systemd[1]: Created slice system-systemd\x2dfsck.slice. [...] [ 5.481476] random: systemd: uninitialized urandom read (16 bytes read) [...] [ 5.482206] systemd[1]: Listening on fsck to fsckd communication Socket. [...] [ 5.482827] systemd[1]: Listening on udev Kernel Socket. [...] [ 5.483459] systemd[1]: Listening on udev Control Socket. [...] [ 5.484473] systemd[1]: Listening on Journal Socket. [...] [ 5.490111] systemd[1]: Starting udev Coldplug all Devices... [...] [ 5.503211] systemd[1]: Starting Load Kernel Modules... [...] [ 5.607090] i2c /dev entries driver [...] [ 6.271639] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [...] [ 6.405910] systemd-journald[125]: Received request to flush runtime journal from PID 1 [...] [ 6.514419] usb 1-1.2: new high-speed USB device number 7 using dwc_otg [...] [ 6.655308] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=b140, bcdDevice=22.06 [...] [ 6.655339] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [...] [ 6.655355] usb 1-1.2: Product: P600 [...] [ 6.655370] usb 1-1.2: Manufacturer: HP [...] [ 6.655385] usb 1-1.2: SerialNumber: ... [...] [ 6.656351] usb 1-1.2: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is [...] [ 6.656370] usb 1-1.2: required by the UAS driver. Please try an other USB controller if you wish to use UAS. [...] [ 6.656388] usb-storage 1-1.2:1.0: USB Mass Storage device detected [...] [ 6.657293] scsi host0: usb-storage 1-1.2:1.0 [...] [ 7.108622] mc: Linux media interface: v0.10 [...] [ 7.135765] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [...] [ 7.138539] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [...] [ 7.138571] [vc_sm_connected_init]: start [...] [ 7.153117] [vc_sm_connected_init]: installed successfully [...] [ 7.154215] videodev: Linux video capture interface: v2.00 [...] [ 7.211683] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [...] [ 7.211692] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [...] [ 7.211698] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [...] [ 7.226245] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [...] [ 7.238291] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [...] [ 7.238941] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [...] [ 7.239452] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [...] [ 7.239867] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [...] [ 7.239917] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [...] [ 7.239959] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [...] [ 7.239983] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [...] [ 7.240411] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [...] [ 7.246099] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [...] [ 7.246614] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [...] [ 7.251347] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [...] [ 7.287665] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [...] [ 7.287907] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [...] [ 7.290207] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [...] [ 7.299576] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [...] [ 7.299634] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [...] [ 7.314664] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [...] [ 7.314856] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [...] [ 7.325802] bcm2835_audio bcm2835_audio: card created with 4 channels [...] [ 7.346301] bcm2835_audio bcm2835_audio: card created with 4 channels [...] [ 7.675354] scsi 0:0:0:0: Direct-Access HP DISK00 2206 PQ: 0 ANSI: 6 [...] [ 7.676917] sd 0:0:0:0: [sda] 244096184 512-byte logical blocks: (125 GB/116 GiB) [...] [ 7.677272] scsi 0:0:0:1: Direct-Access HP DISK01 2206 PQ: 0 ANSI: 6 [...] [ 7.677708] sd 0:0:0:0: [sda] Write Protect is off [...] [ 7.677729] sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08 [...] [ 7.678423] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [...] [ 7.679173] sd 0:0:0:1: [sdb] 244096184 512-byte logical blocks: (125 GB/116 GiB) [...] [ 7.679600] scsi 0:0:0:2: CD-ROM HP Virtual CD 2206 PQ: 0 ANSI: 6 [...] [ 7.680116] sd 0:0:0:1: [sdb] Write Protect is off [...] [ 7.680137] sd 0:0:0:1: [sdb] Mode Sense: 47 00 00 08 [...] [ 7.689713] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [...] [ 7.716351] cfg80211: Loading compiled-in X.509 certificates for regulatory database [...] [ 7.746986] sda: sda1 [...] [ 7.748060] sdb: sdb1 [...] [ 7.752031] sd 0:0:0:0: [sda] Attached SCSI disk [...] [ 7.753036] sd 0:0:0:1: [sdb] Attached SCSI disk [...] [ 7.887368] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [...] [ 8.004722] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [...] [ 8.024870] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [...] [ 8.025254] usbcore: registered new interface driver brcmfmac [...] [ 8.051313] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2 [...] [ 8.262364] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [...] [ 8.262545] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [...] [ 8.263501] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version XXX.XXX.XXX.XXX (r723000 CY) FWID 01-3b33decd [...] [ 8.268796] random: crng init done [...] [ 8.268817] random: 7 urandom warning(s) missed due to ratelimiting [...] [ 9.094625] usbcore: registered new interface driver uas [...] [ 9.318511] sd 0:0:0:0: Attached scsi generic sg0 type 0 [...] [ 9.320141] sd 0:0:0:1: Attached scsi generic sg1 type 0 [...] [ 9.321258] scsi 0:0:0:2: Attached scsi generic sg2 type 5 [...] [ 9.386870] sr 0:0:0:2: [sr0] scsi3-mmc drive: 51x/51x caddy [...] [ 9.386892] cdrom: Uniform CD-ROM driver Revision: 3.20 [...] [ 9.468295] sr 0:0:0:2: Attached scsi CD-ROM sr0 [...] [ 9.516304] Under-voltage detected! (0x00050005) [...] [ 11.544155] uart-pl011 3f201000.serial: no DMA platform data [...] [ 11.702325] 8021q: 802.1Q VLAN Support v1.8 [...] [ 12.395459] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [...] [ 12.434427] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [...] [ 13.206894] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL) [...] [ 13.207382] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [...] [ 13.223761] smsc95xx 1-1.1:1.0 eth0: Link is Down [...] [ 13.614977] squashfs: version 4.0 (2009/01/31) Phillip Lougher [...] [ 15.275685] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [...] [ 15.275748] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [...] [ 16.182747] Bluetooth: Core ver 2.22 [...] [ 16.182930] NET: Registered protocol family 31 [...] [ 16.182943] Bluetooth: HCI device and connection manager initialized [...] [ 16.182998] Bluetooth: HCI socket layer initialized [...] [ 16.183020] Bluetooth: L2CAP socket layer initialized [...] [ 16.183068] Bluetooth: SCO socket layer initialized [...] [ 16.221040] Bluetooth: HCI UART driver ver 2.3 [...] [ 16.221116] Bluetooth: HCI UART protocol H4 registered [...] [ 16.221539] Bluetooth: HCI UART protocol Three-wire (H5) registered [...] [ 16.222676] Bluetooth: HCI UART protocol Broadcom registered [...] [ 16.716469] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [...] [ 16.716491] Bluetooth: BNEP filters: protocol multicast [...] [ 16.716534] Bluetooth: BNEP socket layer initialized [...] [ 17.040301] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [...] [ 19.750349] fuse: init (API version 7.32) [...] [ 21.710468] Bluetooth: RFCOMM TTY layer initialized [...] [ 21.710545] Bluetooth: RFCOMM socket layer initialized [...] [ 21.710603] Bluetooth: RFCOMM ver 1.11 [...] [ 25.853080] ISO 9660 Extensions: Microsoft Joliet Level 3 [...] [ 25.880264] ISOFS: changing to secondary root [...] [ 26.393049] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [...] [ 26.737659] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [...] [ 494.154078] Voltage normalised (0x00000000) [...] [ 504.554042] Under-voltage detected! (0x00050005) [...] [ 510.794042] Voltage normalised (0x00000000) [...] [ 512.874038] Under-voltage detected! (0x00050005) [...] [ 517.034001] Voltage normalised (0x00000000) [...] [ 521.194110] Under-voltage detected! (0x00050005)