[ 0.142581] [mem 0xbf000000-0xdfffffff] available for PCI devices [ 0.142582] Booting paravirtualized kernel on bare hardware [ 0.142584] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.227320] random: get_random_bytes called from start_kernel+0x95/0x54e with crng_init=0 [ 0.227325] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:12 nr_node_ids:1 [ 0.227636] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144 [ 0.227641] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152 [ 0.227641] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.227656] Built 1 zonelists, mobility grouping on. Total pages: 8234685 [ 0.227657] Policy zone: Normal [ 0.227658] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=HASH_584-0A77-A963-64CA-35E955E81112 rw radeon.audio=1 [ 0.232074] Calgary: detecting Calgary via BIOS EBDA area [ 0.232075] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.300069] Memory: 32611744K/33461688K available (12293K kernel code, 1268K rwdata, 3728K rodata, 1532K init, 3936K bss, 849944K reserved, 0K cma-reserved) [ 0.300194] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.300199] Kernel/User page tables isolation: enabled [ 0.300211] ftrace: allocating 35812 entries in 140 pages [ 0.311008] rcu: Preemptible hierarchical RCU implementation. [ 0.311009] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.311009] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.311010] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12. [ 0.311010] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.311011] Tasks RCU enabled. [ 0.311011] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.311012] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.312118] NR_IRQS: 20736, nr_irqs: 928, preallocated irqs: 16 [ 0.312268] rcu: Offload RCU callbacks from CPUs: (none). [ 0.312308] Console: colour dummy device 80x25 [ 0.312312] printk: console [tty0] enabled [ 0.312327] ACPI: Core revision 20181003 [ 0.312600] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.312607] hpet clockevent registered [ 0.312609] APIC: Switch to symmetric I/O mode setup [ 0.312696] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.312739] Switched APIC routing to physical flat. [ 0.313186] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.329278] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f910de5db8, max_idle_ns: 440795337280 ns [ 0.329286] Calibrating delay loop (skipped), value calculated using timer frequency.. 6602.86 BogoMIPS (lpj=10999780) [ 0.329288] pid_max: default: 32768 minimum: 301 [ 0.329400] LSM: Security Framework initializing [ 0.329401] Yama: becoming mindful. [ 0.329404] AppArmor: AppArmor disabled by boot time parameter [ 0.333446] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.335437] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.335509] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.335575] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.335746] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.335747] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.335750] mce: CPU supports 22 MCE banks [ 0.335763] CPU0: Thermal monitoring enabled (TM1) [ 0.335797] process: using mwait in idle threads [ 0.335799] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.335800] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.335801] Spectre V2 : Mitigation: Full generic retpoline [ 0.335801] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.335802] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.335808] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.335808] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.335809] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.335936] Freeing SMP alternatives memory: 28K [ 0.345986] TSC deadline timer enabled [ 0.345988] smpboot: CPU0: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (family: 0x6, model: 0x3f, stepping: 0x2) [ 0.365959] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.366045] ... version: 3 [ 0.366046] ... bit width: 48 [ 0.366047] ... generic registers: 4 [ 0.366049] ... value mask: 0000ffffffffffff [ 0.366050] ... max period: 00007fffffffffff [ 0.366051] ... fixed-purpose events: 3 [ 0.366053] ... event mask: 000000070000000f [ 0.372619] rcu: Hierarchical SRCU implementation. [ 0.396362] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.402629] smp: Bringing up secondary CPUs ... [ 0.442641] x86: Booting SMP configuration: [ 0.442643] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 [ 0.843641] smp: Brought up 1 node, 12 CPUs [ 0.843641] smpboot: Max logical packages: 1 [ 0.843641] smpboot: Total of 12 processors activated (79230.35 BogoMIPS) [ 0.846807] devtmpfs: initialized [ 0.846807] x86/mm: Memory block size: 128MB [ 0.847683] PM: Registering ACPI NVS region [mem 0xbb11b000-0xbd31bfff] (35655680 bytes) [ 0.847683] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.847683] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.849299] pinctrl core: initialized pinctrl subsystem [ 0.849386] RTC time: 11:50:26, date: 01/05/19 [ 0.849522] NET: Registered protocol family 16 [ 0.849587] cpuidle: using governor ladder [ 0.849587] cpuidle: using governor menu [ 0.849587] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.849587] ACPI: bus type PCI registered [ 0.849587] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.849587] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.849587] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.849587] PCI: Using configuration type 1 for base access [ 0.849587] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.850528] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.850528] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.850528] ACPI: Added _OSI(Module Device) [ 0.850528] ACPI: Added _OSI(Processor Device) [ 0.850528] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.850528] ACPI: Added _OSI(Processor Aggregator Device) [ 0.850528] ACPI: Added _OSI(Linux-Dell-Video) [ 0.850528] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.899646] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.905812] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.931517] ACPI: EC: EC started [ 0.931518] ACPI: EC: interrupt blocked [ 0.931540] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.931542] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.931543] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.931543] ACPI: Interpreter enabled [ 0.931559] ACPI: (supports S0 S3 S4 S5) [ 0.931560] ACPI: Using IOAPIC for interrupt routing [ 0.931585] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.932427] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.968630] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.968634] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.006084] acpi PNP0A03:03: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR] [ 5.032741] acpi PNP0A03:03: _OSC: OS now controls [PME AER PCIeCapability] [ 5.032744] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 5.032817] PCI host bridge to bus 0000:ff [ 5.032819] pci_bus 0000:ff: root bus resource [bus ff] [ 5.032830] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000 [ 5.032878] pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100 [ 5.032915] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100 [ 5.032953] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000 [ 5.032987] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000 [ 5.033020] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000 [ 5.033054] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000 [ 5.033087] pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000 [ 5.033126] pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000 [ 5.033163] pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000 [ 5.033196] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000 [ 5.033230] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000 [ 5.033266] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000 [ 5.033300] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000 [ 5.033334] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000 [ 5.033368] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100 [ 5.033405] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000 [ 5.033438] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100 [ 5.033470] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000 [ 5.033504] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000 [ 5.033541] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100 [ 5.033582] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000 [ 5.033621] pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000 [ 5.033660] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000 [ 5.033700] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000 [ 5.033740] pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000 [ 5.033778] pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000 [ 5.033817] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000 [ 5.033853] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000 [ 5.033890] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000 [ 5.033929] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000 [ 5.033968] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000 [ 5.034008] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000 [ 5.034047] pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000 [ 5.034084] pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000 [ 5.034119] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000 [ 5.034156] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000 [ 5.034194] pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000 [ 5.034235] pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000 [ 5.034274] pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000 [ 5.034319] pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000 [ 5.034362] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000 [ 5.034403] pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000 [ 5.034440] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000 [ 5.034478] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000 [ 5.034516] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000 [ 5.034554] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000 [ 5.034591] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000 [ 5.034629] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000 [ 5.034670] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000 [ 5.034705] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000 [ 5.034742] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000 [ 5.034777] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000 [ 5.034802] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000 [ 5.034839] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000 [ 5.034876] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000 [ 5.040052] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 5.040055] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 7.086089] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR] [ 9.112715] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 9.112717] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 9.113044] PCI host bridge to bus 0000:00 [ 9.113046] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 9.113047] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 9.113048] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 9.113049] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffbfff window] [ 9.113050] pci_bus 0000:00: root bus resource [bus 00-fe] [ 9.113057] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000 [ 9.113201] pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400 [ 9.113251] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 9.113389] pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400 [ 9.113439] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 9.113547] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400 [ 9.113595] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 9.113729] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400 [ 9.113780] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 9.113909] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000 [ 9.114027] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000 [ 9.114157] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000 [ 9.114272] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020 [ 9.114281] pci 0000:00:05.4: reg 0x10: [mem 0xfbf3d000-0xfbf3dfff] [ 9.114407] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 9.114584] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 9.114601] pci 0000:00:14.0: reg 0x10: [mem 0xfbf20000-0xfbf2ffff 64bit] [ 9.114648] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 9.114742] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 9.114760] pci 0000:00:16.0: reg 0x10: [mem 0xfbf39000-0xfbf3900f 64bit] [ 9.114815] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 9.114914] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000 [ 9.114930] pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff] [ 9.114936] pci 0000:00:19.0: reg 0x14: [mem 0xfbf36000-0xfbf36fff] [ 9.114943] pci 0000:00:19.0: reg 0x18: [io 0xf000-0xf01f] [ 9.114993] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 9.115090] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 [ 9.115109] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf35000-0xfbf353ff] [ 9.115183] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 9.115281] pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300 [ 9.115296] pci 0000:00:1b.0: reg 0x10: [mem 0xfbf30000-0xfbf33fff 64bit] [ 9.115350] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 9.115443] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 9.115505] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 9.115609] pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400 [ 9.115672] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 9.115773] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 9.115836] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 9.115940] pci 0000:00:1c.6: [8086:8d1c] type 01 class 0x060400 [ 9.116007] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 9.116110] pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400 [ 9.116173] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 9.116275] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 9.116294] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf34000-0xfbf343ff] [ 9.116368] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 9.116473] pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100 [ 9.116659] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 9.116673] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 9.116679] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 9.116684] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 9.116690] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 9.116696] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 9.116702] pci 0000:00:1f.2: reg 0x24: [mem 0xfbf3c000-0xfbf3c7ff] [ 9.116733] pci 0000:00:1f.2: PME# supported from D3hot [ 9.116825] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 9.116838] pci 0000:00:1f.3: reg 0x10: [mem 0xfbf3b000-0xfbf3b0ff 64bit] [ 9.116851] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 9.117136] pci 0000:00:01.0: PCI bridge to [bus 03] [ 9.117332] pci 0000:04:00.0: [144d:a808] type 00 class 0x010802 [ 9.117351] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit] [ 9.117492] pci 0000:00:01.1: PCI bridge to [bus 04] [ 9.117495] pci 0000:00:01.1: bridge window [mem 0xfbc00000-0xfbcfffff] [ 9.117685] pci 0000:02:00.0: [1b21:1242] type 00 class 0x0c0330 [ 9.117707] pci 0000:02:00.0: reg 0x10: [mem 0xfbd00000-0xfbd07fff 64bit] [ 9.117742] pci 0000:02:00.0: enabling Extended Tags [ 9.117793] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 9.117873] pci 0000:00:02.0: PCI bridge to [bus 02] [ 9.117876] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 9.118063] pci 0000:01:00.0: [1002:67ff] type 00 class 0x030000 [ 9.118084] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 9.118092] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] [ 9.118098] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 9.118104] pci 0000:01:00.0: reg 0x24: [mem 0xfbe00000-0xfbe3ffff] [ 9.118109] pci 0000:01:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref] [ 9.118114] pci 0000:01:00.0: enabling Extended Tags [ 9.118127] pci 0000:01:00.0: BAR 0: assigned to efifb [ 9.118168] pci 0000:01:00.0: supports D1 D2 [ 9.118169] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 9.118255] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300 [ 9.118272] pci 0000:01:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit] [ 9.118300] pci 0000:01:00.1: enabling Extended Tags [ 9.118340] pci 0000:01:00.1: supports D1 D2 [ 9.118403] pci 0000:00:03.0: PCI bridge to [bus 01] [ 9.118405] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 9.118407] pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 9.118410] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 9.118451] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 9.118508] pci 0000:06:00.0: [14e4:43a0] type 00 class 0x028000 [ 9.118542] pci 0000:06:00.0: reg 0x10: [mem 0xfb800000-0xfb807fff 64bit] [ 9.118556] pci 0000:06:00.0: reg 0x18: [mem 0xfb600000-0xfb7fffff 64bit] [ 9.118667] pci 0000:06:00.0: supports D1 D2 [ 9.118668] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 9.118769] pci 0000:00:1c.3: PCI bridge to [bus 06] [ 9.118773] pci 0000:00:1c.3: bridge window [mem 0xfb600000-0xfb8fffff] [ 9.118827] pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601 [ 9.118850] pci 0000:07:00.0: reg 0x10: [io 0xd050-0xd057] [ 9.118860] pci 0000:07:00.0: reg 0x14: [io 0xd040-0xd043] [ 9.118870] pci 0000:07:00.0: reg 0x18: [io 0xd030-0xd037] [ 9.118880] pci 0000:07:00.0: reg 0x1c: [io 0xd020-0xd023] [ 9.118890] pci 0000:07:00.0: reg 0x20: [io 0xd000-0xd01f] [ 9.118900] pci 0000:07:00.0: reg 0x24: [mem 0xfbb00000-0xfbb001ff] [ 9.119023] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 9.119026] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 9.119029] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff] [ 9.119086] pci 0000:08:00.0: [1b21:1142] type 00 class 0x0c0330 [ 9.119120] pci 0000:08:00.0: reg 0x10: [mem 0xfba00000-0xfba07fff 64bit] [ 9.119249] pci 0000:08:00.0: PME# supported from D3cold [ 9.119323] pci 0000:00:1c.6: PCI bridge to [bus 08] [ 9.119327] pci 0000:00:1c.6: bridge window [mem 0xfba00000-0xfbafffff] [ 9.119382] pci 0000:09:00.0: [168c:0030] type 00 class 0x028000 [ 9.119411] pci 0000:09:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff 64bit] [ 9.119447] pci 0000:09:00.0: reg 0x30: [mem 0xfb920000-0xfb92ffff pref] [ 9.119517] pci 0000:09:00.0: supports D1 [ 9.119518] pci 0000:09:00.0: PME# supported from D0 D1 D3hot [ 9.119597] pci 0000:00:1c.7: PCI bridge to [bus 09] [ 9.119601] pci 0000:00:1c.7: bridge window [mem 0xfb900000-0xfb9fffff] [ 9.119639] pci_bus 0000:00: on NUMA node 0 [ 9.120377] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 9.120435] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 9.120490] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15) [ 9.120545] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15) [ 9.120600] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 9.120655] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 9.120710] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 9.120765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 9.122615] ACPI: EC: interrupt unblocked [ 9.122615] ACPI: EC: event unblocked [ 9.122615] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 9.122615] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events [ 9.122634] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 9.122636] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 9.122638] pci 0000:01:00.0: vgaarb: bridge control possible [ 9.122638] vgaarb: loaded [ 9.122746] ACPI: bus type USB registered [ 9.122755] usbcore: registered new interface driver usbfs [ 9.122760] usbcore: registered new interface driver hub [ 9.122801] usbcore: registered new device driver usb [ 9.122822] pps_core: LinuxPPS API ver. 1 registered [ 9.122822] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 9.122824] PTP clock support registered [ 9.122835] EDAC MC: Ver: 3.0.0 [ 9.122961] Registered efivars operations [ 9.125995] PCI: Using ACPI for IRQ routing [ 9.129884] PCI: pci_cache_line_size set to 64 bytes [ 9.129985] e820: reserve RAM buffer [mem 0xba358000-0xbbffffff] [ 9.129986] e820: reserve RAM buffer [mem 0xbdd04000-0xbfffffff] [ 9.129987] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff] [ 9.130073] NetLabel: Initializing [ 9.130073] NetLabel: domain hash size = 128 [ 9.130074] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 9.130084] NetLabel: unlabeled traffic allowed by default [ 9.130089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 9.130089] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 9.132617] clocksource: Switched to clocksource tsc-early [ 9.141247] VFS: Disk quotas dquot_6.6.0 [ 9.141265] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 9.141323] pnp: PnP ACPI init [ 9.141688] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 9.141788] system 00:01: [io 0x0500-0x057f] has been reserved [ 9.141790] system 00:01: [io 0x0400-0x047f] has been reserved [ 9.141791] system 00:01: [io 0x0580-0x059f] has been reserved [ 9.141792] system 00:01: [io 0x0600-0x061f] has been reserved [ 9.141793] system 00:01: [io 0x0880-0x0883] has been reserved [ 9.141795] system 00:01: [io 0x0800-0x081f] has been reserved [ 9.141796] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 9.141797] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 9.141799] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 9.141800] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 9.141801] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 9.141802] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 9.141803] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 9.141806] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.141943] system 00:02: [io 0x0290-0x029f] has been reserved [ 9.141946] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 9.142445] pnp: PnP ACPI: found 3 devices [ 9.148122] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 9.148177] pci 0000:00:01.0: PCI bridge to [bus 03] [ 9.148182] pci 0000:00:01.1: PCI bridge to [bus 04] [ 9.148185] pci 0000:00:01.1: bridge window [mem 0xfbc00000-0xfbcfffff] [ 9.148188] pci 0000:00:02.0: PCI bridge to [bus 02] [ 9.148191] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 9.148194] pci 0000:00:03.0: PCI bridge to [bus 01] [ 9.148196] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 9.148198] pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 9.148200] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] [ 9.148203] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 9.148211] pci 0000:00:1c.3: PCI bridge to [bus 06] [ 9.148214] pci 0000:00:1c.3: bridge window [mem 0xfb600000-0xfb8fffff] [ 9.148219] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 9.148221] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 9.148224] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff] [ 9.148229] pci 0000:00:1c.6: PCI bridge to [bus 08] [ 9.148232] pci 0000:00:1c.6: bridge window [mem 0xfba00000-0xfbafffff] [ 9.148238] pci 0000:00:1c.7: PCI bridge to [bus 09] [ 9.148241] pci 0000:00:1c.7: bridge window [mem 0xfb900000-0xfb9fffff] [ 9.148247] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 9.148248] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 9.148249] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 9.148250] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfbffbfff window] [ 9.148251] pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 9.148252] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 9.148253] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 9.148254] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff] [ 9.148255] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] [ 9.148256] pci_bus 0000:06: resource 1 [mem 0xfb600000-0xfb8fffff] [ 9.148257] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] [ 9.148258] pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 9.148259] pci_bus 0000:08: resource 1 [mem 0xfba00000-0xfbafffff] [ 9.148260] pci_bus 0000:09: resource 1 [mem 0xfb900000-0xfb9fffff] [ 9.148426] NET: Registered protocol family 2 [ 9.148551] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 9.148632] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 9.148897] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 9.149021] TCP: Hash tables configured (established 262144 bind 65536) [ 9.149068] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 9.149144] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 9.149252] NET: Registered protocol family 1 [ 9.149256] NET: Registered protocol family 44 [ 9.169443] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6ad took 19439 usecs [ 9.189465] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6ad took 19535 usecs [ 9.189475] PCI: CLS mismatch (64 != 32), using 64 bytes [ 9.189612] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 9.189634] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 9.189840] Unpacking initramfs... [ 9.370905] Freeing initrd memory: 19048K [ 9.370910] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 9.370912] software IO TLB: mapped [mem 0xa9749000-0xad749000] (64MB) [ 9.371130] check: Scanning for low memory corruption every 60 seconds [ 9.371597] Initialise system trusted keyrings [ 9.371605] Key type blacklist registered [ 9.371652] workingset: timestamp_bits=41 max_order=23 bucket_order=0 [ 9.372542] zbud: loaded [ 9.394670] Key type asymmetric registered [ 9.394671] Asymmetric key parser 'x509' registered [ 9.394677] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 9.394718] io scheduler noop registered [ 9.394719] io scheduler deadline registered [ 9.394741] io scheduler cfq registered (default) [ 9.394742] io scheduler mq-deadline registered [ 9.394742] io scheduler kyber registered [ 9.394768] io scheduler bfq registered [ 9.395186] pcieport 0000:00:01.0: Signaling PME with IRQ 26 [ 9.395226] aer 0000:00:01.0:pcie002: AER enabled with IRQ 26 [ 9.395369] pcieport 0000:00:01.1: Signaling PME with IRQ 27 [ 9.395411] aer 0000:00:01.1:pcie002: AER enabled with IRQ 27 [ 9.395483] pcieport 0000:00:02.0: Signaling PME with IRQ 28 [ 9.395516] aer 0000:00:02.0:pcie002: AER enabled with IRQ 28 [ 9.395652] pcieport 0000:00:03.0: Signaling PME with IRQ 30 [ 9.395691] aer 0000:00:03.0:pcie002: AER enabled with IRQ 30 [ 9.395832] pcieport 0000:00:1c.0: Signaling PME with IRQ 31 [ 9.395983] pcieport 0000:00:1c.3: Signaling PME with IRQ 32 [ 9.396127] pcieport 0000:00:1c.4: Signaling PME with IRQ 33 [ 9.396209] pcieport 0000:00:1c.6: Signaling PME with IRQ 34 [ 9.396349] pcieport 0000:00:1c.7: Signaling PME with IRQ 35 [ 9.396403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.396464] efifb: probing for efifb [ 9.396472] pmd_set_huge: Cannot satisfy [mem 0xc0000000-0xc0200000] with a huge-page mapping due to MTRR override. [ 9.396478] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k [ 9.396479] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 9.396479] efifb: scrolling: redraw [ 9.396481] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 9.396514] fbcon: Deferring console take-over [ 9.396515] fb0: EFI VGA frame buffer device [ 9.396522] intel_idle: MWAIT substates: 0x2120 [ 9.396523] intel_idle: v0.4.1 model 0x3F [ 9.396856] intel_idle: lapic_timer_reliable_states 0xffffffff [ 9.397010] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 9.397016] ACPI: Power Button [PWRB] [ 9.397045] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 9.397055] ACPI: Power Button [PWRF] [ 9.398983] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 9.400316] nvme nvme0: pci function 0000:04:00.0 [ 9.400346] usbcore: registered new interface driver usbserial_generic [ 9.400350] usbserial: USB Serial support registered for generic [ 9.400365] rtc_cmos 00:00: RTC can wake from S4 [ 9.400483] rtc_cmos 00:00: registered as rtc0 [ 9.400493] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 9.400529] intel_pstate: Intel P-state driver initializing [ 9.400809] ledtrig-cpu: registered to indicate activity on CPUs [ 9.400986] NET: Registered protocol family 10 [ 9.410159] Segment Routing with IPv6 [ 9.410195] NET: Registered protocol family 17 [ 9.412189] intel_rdt: Intel RDT L3 monitoring detected [ 9.412204] RAS: Correctable Errors collector initialized. [ 9.412257] microcode: sig=0x306f2, pf=0x4, revision=0x3d [ 9.412385] microcode: Microcode Update Driver: v2.2. [ 9.412399] sched_clock: Marking stable (9412053028, 324074)->(9463638031, -51260929) [ 9.412776] registered taskstats version 1 [ 9.412786] Loading compiled-in X.509 certificates [ 9.417783] Loaded X.509 cert 'Build time autogenerated kernel key: 607bf7b41813a10b7fecf0eb8d5fb1179fd6fddf' [ 9.417831] zswap: loaded using pool lzo/zbud [ 9.426130] Key type big_key registered [ 9.427001] Magic number: 3:297:832 [ 9.427122] acpi device:b7: hash matches [ 9.427311] rtc_cmos 00:00: setting system clock to 2019-01-05 11:50:35 UTC (1546689035) [ 9.613361] nvme nvme0: missing or invalid SUBNQN field. [ 9.613400] nvme nvme0: Shutdown timeout set to 8 seconds [ 9.640567] nvme0n1: p1 p2 p3 [ 9.642763] Freeing unused decrypted memory: 2040K [ 9.643317] Freeing unused kernel image memory: 1532K [ 9.669380] Write protecting the kernel read-only data: 18432k [ 9.670415] Freeing unused kernel image memory: 2016K [ 9.670663] Freeing unused kernel image memory: 368K [ 9.688035] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 9.688036] x86/mm: Checking user space page tables [ 9.695161] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 9.695163] Run /init as init process [ 9.715300] fbcon: Taking over console [ 9.715384] Console: switching to colour frame buffer device 128x48 [ 9.730380] Linux agpgart interface v0.103 [ 9.756018] AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 9.756018] AMD IOMMUv2 functionality not available on this system [ 9.823798] [drm] amdgpu kernel modesetting enabled. [ 9.823900] CRAT table not found [ 9.823901] Virtual CRAT table created for CPU [ 9.823901] Parsing CRAT table with 1 nodes [ 9.823902] Creating topology SYSFS entries [ 9.823910] Topology: Add CPU node [ 9.823910] Finished initializing topology [ 9.824016] checking generic (c0000000 300000) vs hw (c0000000 10000000) [ 9.824019] fb0: switching to amdgpudrmfb from EFI VGA [ 9.824049] Console: switching to colour dummy device 80x25 [ 9.824464] [drm] initializing kernel modesetting (POLARIS11 0x1002:0x67FF 0x1043:0x052D 0xCF). [ 9.824478] [drm] register mmio base: 0xFBE00000 [ 9.824479] [drm] register mmio size: 262144 [ 9.824490] [drm] add ip block number 0 <vi_common> [ 9.824492] [drm] add ip block number 1 <gmc_v8_0> [ 9.824493] [drm] add ip block number 2 <tonga_ih> [ 9.824494] [drm] add ip block number 3 <gfx_v8_0> [ 9.824496] [drm] add ip block number 4 <sdma_v3_0> [ 9.824497] [drm] add ip block number 5 <powerplay> [ 9.824499] [drm] add ip block number 6 <dm> [ 9.824500] [drm] add ip block number 7 <uvd_v6_0> [ 9.824501] [drm] add ip block number 8 <vce_v3_0> [ 9.824513] [drm] UVD is enabled in VM mode [ 9.824514] [drm] UVD ENC is enabled in VM mode [ 9.824517] [drm] VCE enabled in VM mode [ 9.824801] amdgpu 0000:01:00.0: No more image in the PCI ROM [ 9.824875] ATOM BIOS: 115-C994PI0-102 [ 9.824913] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 9.824976] amdgpu 0000:01:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 9.824979] amdgpu 0000:01:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 9.824986] [drm] Detected VRAM RAM=2048M, BAR=256M [ 9.824988] [drm] RAM width 128bits GDDR5 [ 9.825072] [TTM] Zone kernel: Available graphics memory: 16422686 kiB [ 9.825073] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 9.825075] [TTM] Initializing pool allocator [ 9.825081] [TTM] Initializing DMA pool allocator [ 9.825639] [drm] amdgpu: 2048M of VRAM memory ready [ 9.825641] [drm] amdgpu: 3072M of GTT memory ready. [ 9.825668] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 9.826723] [drm] PCIE GART of 256M enabled (table at 0x000000F400300000). [ 9.826890] [drm] Chained IB support enabled! [ 9.828615] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 9.829477] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 9.905485] [drm] DM_PPLIB: values for Engine clock [ 9.905486] [drm] DM_PPLIB: 214000 [ 9.905486] [drm] DM_PPLIB: 387000 [ 9.905487] [drm] DM_PPLIB: 869000 [ 9.905487] [drm] DM_PPLIB: 1025000 [ 9.905487] [drm] DM_PPLIB: 1094000 [ 9.905488] [drm] DM_PPLIB: 1142000 [ 9.905488] [drm] DM_PPLIB: 1184000 [ 9.905488] [drm] DM_PPLIB: 1210000 [ 9.905489] [drm] DM_PPLIB: Validation clocks: [ 9.905489] [drm] DM_PPLIB: engine_max_clock: 121000 [ 9.905490] [drm] DM_PPLIB: memory_max_clock: 175000 [ 9.905490] [drm] DM_PPLIB: level : 8 [ 9.905491] [drm] DM_PPLIB: values for Memory clock [ 9.905491] [drm] DM_PPLIB: 300000 [ 9.905492] [drm] DM_PPLIB: 625000 [ 9.905492] [drm] DM_PPLIB: 1750000 [ 9.905492] [drm] DM_PPLIB: Validation clocks: [ 9.905493] [drm] DM_PPLIB: engine_max_clock: 121000 [ 9.905493] [drm] DM_PPLIB: memory_max_clock: 175000 [ 9.905494] [drm] DM_PPLIB: level : 8 [ 9.926026] [drm] Display Core initialized with v3.1.68! [ 9.946570] [drm] SADs count is: -2, don't need to read it [ 9.982088] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.982089] [drm] Driver supports precise vblank timestamp query. [ 10.008738] [drm] UVD and UVD ENC initialized successfully. [ 10.109657] [drm] VCE initialized successfully. [ 10.114447] kfd kfd: Allocated 3969056 bytes on gart [ 10.114454] Virtual CRAT table created for GPU [ 10.114454] Parsing CRAT table with 1 nodes [ 10.114458] Creating topology SYSFS entries [ 10.114494] Topology: Add dGPU node [0x67ff:0x1002] [ 10.114535] kfd kfd: added device 1002:67ff [ 10.116503] [drm] fb mappable at 0xC0828000 [ 10.116505] [drm] vram apper at 0xC0000000 [ 10.116507] [drm] size 9216000 [ 10.116508] [drm] fb depth is 24 [ 10.116509] [drm] pitch is 7680 [ 10.116620] fbcon: amdgpudrmfb (fb0) is primary device [ 10.188433] Console: switching to colour frame buffer device 240x67 [ 10.216894] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device [ 10.243769] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:01:00.0 on minor 0 [ 10.372086] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.373276] ehci-pci: EHCI PCI platform driver [ 10.373680] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 10.373694] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 10.373711] ehci-pci 0000:00:1a.0: debug port 2 [ 10.377608] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 10.377627] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf35000 [ 10.380394] SCSI subsystem initialized [ 10.386441] libata version 3.00 loaded. [ 10.389292] tsc: Refined TSC clocksource calibration: 3299.996 MHz [ 10.389299] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f914873c0b, max_idle_ns: 440795238987 ns [ 10.389321] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 10.389321] clocksource: Switched to clocksource tsc [ 10.389391] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 10.389393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 10.389394] usb usb1: Product: EHCI Host Controller [ 10.389396] usb usb1: Manufacturer: Linux 4.20.0-arch1-1-ARCH ehci_hcd [ 10.389397] usb usb1: SerialNumber: ... [ 10.389458] ahci 0000:00:1f.2: version 3.0 [ 10.389636] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x9 impl SATA mode [ 10.389638] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 10.389714] hub 1-0:1.0: USB hub found [ 10.389719] hub 1-0:1.0: 2 ports detected [ 10.389850] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 10.389854] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 10.390904] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 10.390907] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 10.391014] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 10.391015] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 10.391016] usb usb2: Product: xHCI Host Controller [ 10.391017] usb usb2: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd [ 10.391018] usb usb2: SerialNumber: ... [ 10.391161] hub 2-0:1.0: USB hub found [ 10.391177] hub 2-0:1.0: 15 ports detected [ 10.393851] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 10.393853] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 10.393856] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 10.393874] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 10.393902] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20 [ 10.393903] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 10.393904] usb usb3: Product: xHCI Host Controller [ 10.393905] usb usb3: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd [ 10.393906] usb usb3: SerialNumber: ... [ 10.393977] hub 3-0:1.0: USB hub found [ 10.393988] hub 3-0:1.0: 6 ports detected [ 10.395225] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 10.395234] ehci-pci 0000:00:1d.0: debug port 2 [ 10.399119] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 10.399127] ehci-pci 0000:00:1d.0: irq 21, io mem 0xfbf34000 [ 10.399832] scsi host0: ahci [ 10.399979] scsi host1: ahci [ 10.400145] scsi host2: ahci [ 10.400230] scsi host3: ahci [ 10.400313] scsi host4: ahci [ 10.400455] scsi host5: ahci [ 10.400498] ata1: SATA max UDMA/133 abar m2048@0xfbf3c000 port 0xfbf3c100 irq 51 [ 10.400498] ata2: DUMMY [ 10.400499] ata3: DUMMY [ 10.400500] ata4: SATA max UDMA/133 abar m2048@0xfbf3c000 port 0xfbf3c280 irq 51 [ 10.400501] ata5: DUMMY [ 10.400501] ata6: DUMMY [ 10.400653] ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled [ 10.400683] ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 10.400685] ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc [ 10.400873] scsi host6: ahci [ 10.400966] scsi host7: ahci [ 10.401012] ata7: SATA max UDMA/133 abar m512@0xfbb00000 port 0xfbb00100 irq 52 [ 10.401014] ata8: SATA max UDMA/133 abar m512@0xfbb00000 port 0xfbb00180 irq 52 [ 10.412679] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 10.412763] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 10.412764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 10.412765] usb usb4: Product: EHCI Host Controller [ 10.412766] usb usb4: Manufacturer: Linux 4.20.0-arch1-1-ARCH ehci_hcd [ 10.412768] usb usb4: SerialNumber: ... [ 10.412888] hub 4-0:1.0: USB hub found [ 10.412893] hub 4-0:1.0: 2 ports detected [ 10.413029] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 10.413033] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5 [ 10.471770] xhci_hcd 0000:02:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010 [ 10.471937] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 10.471938] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 10.471939] usb usb5: Product: xHCI Host Controller [ 10.471940] usb usb5: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd [ 10.471941] usb usb5: SerialNumber: ... [ 10.472043] hub 5-0:1.0: USB hub found [ 10.472048] hub 5-0:1.0: 2 ports detected [ 10.472120] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 10.472122] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 6 [ 10.472124] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 10.472144] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.472157] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20 [ 10.472158] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 10.472159] usb usb6: Product: xHCI Host Controller [ 10.472160] usb usb6: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd [ 10.472161] usb usb6: SerialNumber: ... [ 10.472220] hub 6-0:1.0: USB hub found [ 10.472225] hub 6-0:1.0: 2 ports detected [ 10.472377] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 10.472382] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 7 [ 10.532800] xhci_hcd 0000:08:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410 [ 10.533002] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 10.533003] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 10.533004] usb usb7: Product: xHCI Host Controller [ 10.533005] usb usb7: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd [ 10.533006] usb usb7: SerialNumber: ... [ 10.533110] hub 7-0:1.0: USB hub found [ 10.533117] hub 7-0:1.0: 2 ports detected [ 10.533202] xhci_hcd 0000:08:00.0: xHCI Host Controller [ 10.533204] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 8 [ 10.533206] xhci_hcd 0000:08:00.0: Host supports USB 3.0 SuperSpeed [ 10.533242] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.533255] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20 [ 10.533256] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 10.533257] usb usb8: Product: xHCI Host Controller [ 10.533257] usb usb8: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd [ 10.533258] usb usb8: SerialNumber: ... [ 10.533321] hub 8-0:1.0: USB hub found [ 10.533327] hub 8-0:1.0: 2 ports detected [ 10.602212] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 10.616462] random: fast init done [ 10.693698] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 10.712683] ata7: SATA link down (SStatus 0 SControl 300) [ 10.712692] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 10.712847] systemd[1]: Detected architecture x86-64. [ 10.714592] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 10.714595] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 10.714598] ata1.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 10.714796] ata1.00: supports DRM functions and may not be fully accessible [ 10.715230] ata1.00: NCQ Send/Recv Log not supported [ 10.715232] ata1.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT02B6Q, max UDMA/133 [ 10.715234] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 10.716058] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 10.716835] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 10.716840] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 10.716844] ata1.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 10.717037] ata1.00: supports DRM functions and may not be fully accessible [ 10.717353] ata1.00: NCQ Send/Recv Log not supported [ 10.718039] systemd[1]: Set hostname to ... [ 10.718147] ata1.00: configured for UDMA/133 [ 10.718422] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 10.719336] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 10.726002] usb 2-5: new full-speed USB device number 2 using xhci_hcd [ 10.742631] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 10.758760] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 10.758762] ata4.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 10.758764] ata4.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 10.806029] random: systemd: uninitialized urandom read (16 bytes read) [ 10.806459] systemd[1]: Listening on Journal Socket (/dev/log). [ 10.806593] random: systemd: uninitialized urandom read (16 bytes read) [ 10.808679] systemd[1]: Listening on Process Core Dump Socket. [ 10.808749] random: systemd: uninitialized urandom read (16 bytes read) [ 10.808907] systemd[1]: Listening on LVM2 poll daemon socket. [ 10.808976] systemd[1]: Reached target Login Prompts. [ 10.809090] systemd[1]: Listening on udev Control Socket. [ 10.809315] systemd[1]: Listening on LVM2 metadata daemon socket. [ 10.809571] systemd[1]: Set up automount ... [ 10.826102] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null) [ 10.827040] ata4.00: NCQ Send/Recv Log not supported [ 10.827043] ata4.00: ATA-9: ST1000DX001-1NS162, CC41, max UDMA/133 [ 10.827044] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 10.837542] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.848848] vboxdrv: loading out-of-tree module taints kernel. [ 10.849042] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 10.853501] vboxdrv: Found 12 processor cores [ 10.866295] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05 [ 10.866297] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.866442] hub 1-1:1.0: USB hub found [ 10.866541] hub 1-1:1.0: 6 ports detected [ 10.867275] usb 2-5: New USB device found, idVendor=046d, idProduct=c07f, bcdDevice=91.00 [ 10.867277] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 10.867278] usb 2-5: Product: Gaming Mouse G302 [ 10.867279] usb 2-5: Manufacturer: Logitech [ 10.867280] usb 2-5: SerialNumber: ... [ 10.872827] vboxdrv: TSC mode is Invariant, tentative frequency 3299993379 Hz [ 10.872829] vboxdrv: Successfully loaded version 6.0.0 (interface 0x00290007) [ 10.873729] VBoxPciLinuxInit [ 10.873732] vboxpci: IOMMU not found (not registered) [ 10.874302] VBoxNetAdp: Successfully started. [ 10.875102] VBoxNetFlt: Successfully started. [ 10.889669] usb 4-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05 [ 10.889671] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.889814] hub 4-1:1.0: USB hub found [ 10.889915] hub 4-1:1.0: 8 ports detected [ 10.890507] systemd-journald[430]: Received request to flush runtime journal from PID 1 [ 10.892014] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [ 10.892017] ata4.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 10.892020] ata4.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 10.960339] ata4.00: NCQ Send/Recv Log not supported [ 10.960345] ata4.00: configured for UDMA/133 [ 10.960537] scsi 3:0:0:0: Direct-Access ATA ST1000DX001-1NS1 CC41 PQ: 0 ANSI: 5 [ 10.960694] scsi 3:0:0:0: Attached scsi generic sg1 type 0 [ 11.001246] usb 3-5: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 11.123680] usb 3-5: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 0.01 [ 11.123683] usb 3-5: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 11.123684] usb 3-5: Product: ASM107x [ 11.123686] usb 3-5: Manufacturer: ASUS TEK. [ 11.183307] hub 3-5:1.0: USB hub found [ 11.185966] usb 2-6: new full-speed USB device number 3 using xhci_hcd [ 11.187739] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003) [ 11.187924] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 11.189220] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 11.189223] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 11.189240] sd 3:0:0:0: [sdb] Write Protect is off [ 11.189242] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.189262] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.189273] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 11.189288] sd 0:0:0:0: [sda] Write Protect is off [ 11.189292] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.189314] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.189870] sdb: sdb1 sdb2 sdb3 sdb4 [ 11.190289] sd 3:0:0:0: [sdb] Attached SCSI disk [ 11.192260] sda: sda1 sda2 sda3 sda4 sda5 [ 11.193092] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 11.193093] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 11.193094] RAPL PMU: hw unit of domain package 2^-14 Joules [ 11.193095] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 11.193470] sd 0:0:0:0: [sda] supports TCG Opal [ 11.193473] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.194555] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 11.194556] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 11.195049] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 11.195196] hub 3-5:1.0: 4 ports detected [ 11.199704] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 11.210877] cryptd: max_cpu_qlen set to 1000 [ 11.238537] iTCO_vendor_support: vendor-support=0 [ 11.245450] AVX2 version of gcm_enc/dec engaged. [ 11.245451] AES CTR mode by8 optimization enabled [ 11.247370] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 11.247415] iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460) [ 11.247532] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.250516] asus_wmi: ASUS WMI generic driver loaded [ 11.250673] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.252334] asus_wmi: Initialization: 0x0 [ 11.252363] asus_wmi: BIOS WMI version: 0.9 [ 11.252418] asus_wmi: SFUN value: 0x0 [ 11.252800] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3 [ 11.253048] asus_wmi: Number of fans: 1 [ 11.254216] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.272221] ata8: SATA link down (SStatus 0 SControl 300) [ 11.273983] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 11.274291] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 11.274292] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 11.286689] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 11.298008] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 11.298504] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 11.298505] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.298507] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 11.298508] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 11.298509] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 11.298510] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 11.298512] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 11.298513] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 11.298515] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 11.311838] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 11.312507] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 11.313452] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 11.313522] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 11.313587] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 11.313650] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 11.313704] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 11.313757] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 11.318951] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input12 [ 11.319009] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13 [ 11.319069] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14 [ 11.319123] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15 [ 11.319178] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16 [ 11.331569] usb 2-6: New USB device found, idVendor=0b05, idProduct=180a, bcdDevice= 1.12 [ 11.331572] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 11.331573] usb 2-6: Product: BCM20702A0 [ 11.331575] usb 2-6: Manufacturer: Broadcom Corp [ 11.331577] usb 2-6: SerialNumber: ... [ 11.354324] ath9k 0000:09:00.0: enabling device (0000 -> 0002) [ 11.378781] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null) [ 11.382885] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 11.382887] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 11.382913] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 11.384724] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 11.411462] wl: module license 'MIXED/Proprietary' taints kernel. [ 11.411463] Disabling lock debugging due to kernel taint [ 11.436848] ath: EEPROM regdomain: 0x21 [ 11.436849] ath: EEPROM indicates we should expect a direct regpair map [ 11.436850] ath: Country alpha2 being used: BB [ 11.436850] ath: Regpair used: 0x21 [ 11.437410] wl 0000:06:00.0: enabling device (0000 -> 0002) [ 11.448705] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller XXX.XXX.XXX.XXX (r587334) [ 11.453205] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.453432] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffff91f504720000, irq=19 [ 11.454728] ath9k 0000:09:00.0 wlp9s0: renamed from wlan1 [ 11.461750] EDAC sbridge: Seeking for: PCI ID 8086:2fa0 [ 11.461758] EDAC sbridge: Seeking for: PCI ID 8086:2fa0 [ 11.461767] EDAC sbridge: Seeking for: PCI ID 8086:2f60 [ 11.461773] EDAC sbridge: Seeking for: PCI ID 8086:2fa8 [ 11.461776] EDAC sbridge: Seeking for: PCI ID 8086:2fa8 [ 11.461785] EDAC sbridge: Seeking for: PCI ID 8086:2f71 [ 11.461788] EDAC sbridge: Seeking for: PCI ID 8086:2f71 [ 11.461793] EDAC sbridge: Seeking for: PCI ID 8086:2faa [ 11.461795] EDAC sbridge: Seeking for: PCI ID 8086:2faa [ 11.461800] EDAC sbridge: Seeking for: PCI ID 8086:2fab [ 11.461803] EDAC sbridge: Seeking for: PCI ID 8086:2fab [ 11.461807] EDAC sbridge: Seeking for: PCI ID 8086:2fac [ 11.461810] EDAC sbridge: Seeking for: PCI ID 8086:2fac [ 11.461814] EDAC sbridge: Seeking for: PCI ID 8086:2fad [ 11.461817] EDAC sbridge: Seeking for: PCI ID 8086:2fad [ 11.461822] EDAC sbridge: Seeking for: PCI ID 8086:2f68 [ 11.461825] EDAC sbridge: Seeking for: PCI ID 8086:2f79 [ 11.461830] EDAC sbridge: Seeking for: PCI ID 8086:2f6a [ 11.461836] EDAC sbridge: Seeking for: PCI ID 8086:2f6b [ 11.461842] EDAC sbridge: Seeking for: PCI ID 8086:2f6c [ 11.461848] EDAC sbridge: Seeking for: PCI ID 8086:2f6d [ 11.461854] EDAC sbridge: Seeking for: PCI ID 8086:2ffc [ 11.461856] EDAC sbridge: Seeking for: PCI ID 8086:2ffc [ 11.461862] EDAC sbridge: Seeking for: PCI ID 8086:2ffd [ 11.461864] EDAC sbridge: Seeking for: PCI ID 8086:2ffd [ 11.461869] EDAC sbridge: Seeking for: PCI ID 8086:2fbd [ 11.461872] EDAC sbridge: Seeking for: PCI ID 8086:2fbd [ 11.461876] EDAC sbridge: Seeking for: PCI ID 8086:2fbf [ 11.461880] EDAC sbridge: Seeking for: PCI ID 8086:2fbf [ 11.461884] EDAC sbridge: Seeking for: PCI ID 8086:2fb9 [ 11.461888] EDAC sbridge: Seeking for: PCI ID 8086:2fb9 [ 11.461891] EDAC sbridge: Seeking for: PCI ID 8086:2fbb [ 11.461895] EDAC sbridge: Seeking for: PCI ID 8086:2fbb [ 11.461915] EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled [ 11.462502] EDAC sbridge: Couldn't find mci handler [ 11.463096] EDAC sbridge: Failed to register device with error -19. [ 11.464477] usb 3-6: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 11.469673] intel_rapl: Found RAPL domain package [ 11.475416] random: crng init done [ 11.475417] random: 7 urandom warning(s) missed due to ratelimiting [ 11.475911] wl 0000:06:00.0 wlp6s0: renamed from wlan0 [ 11.590284] usb 3-6: New USB device found, idVendor=174c, idProduct=3074, bcdDevice= 0.01 [ 11.590288] usb 3-6: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 11.590290] usb 3-6: Product: ASM107x [ 11.590292] usb 3-6: Manufacturer: ASUS TEK. [ 11.650316] hub 3-6:1.0: USB hub found [ 11.650865] nct6775: Found NCT6791D or compatible chip at 0x2e:0x290 [ 11.650869] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_GPE.HWM) (20181003/utaddress-213) [ 11.650873] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.653238] usb 2-8: new full-speed USB device number 4 using xhci_hcd [ 11.662333] hub 3-6:1.0: 4 ports detected [ 11.807304] usb 2-8: New USB device found, idVendor=1770, idProduct=ef35, bcdDevice= 1.10 [ 11.807309] usb 2-8: New USB device strings: Mfr=1, Product=1, SerialNumber=... [ 11.807311] usb 2-8: Product: ASUS OSD [ 11.807314] usb 2-8: Manufacturer: ASUS OSD [ 11.807317] usb 2-8: SerialNumber: ... [ 11.959420] usb 3-5.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 11.976814] usb 3-5.4: New USB device found, idVendor=1058, idProduct=25a3, bcdDevice=10.19 [ 11.976819] usb 3-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 11.976822] usb 3-5.4: Product: Elements 25A3 [ 11.976825] usb 3-5.4: Manufacturer: Western Digital [ 11.976827] usb 3-5.4: SerialNumber: ... [ 12.076197] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 12.099349] usb 2-9: new high-speed USB device number 5 using xhci_hcd [ 12.263076] usb 2-9: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.01 [ 12.263080] usb 2-9: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 12.263083] usb 2-9: Product: ASM107x [ 12.263085] usb 2-9: Manufacturer: ASUS TEK. [ 12.263548] hub 2-9:1.0: USB hub found [ 12.263706] hub 2-9:1.0: 4 ports detected [ 12.386003] usb 2-10: new high-speed USB device number 6 using xhci_hcd [ 12.549632] usb 2-10: New USB device found, idVendor=174c, idProduct=2074, bcdDevice= 0.01 [ 12.549636] usb 2-10: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 12.549639] usb 2-10: Product: ASM107x [ 12.549642] usb 2-10: Manufacturer: ASUS TEK. [ 12.550090] hub 2-10:1.0: USB hub found [ 12.550251] hub 2-10:1.0: 4 ports detected [ 12.639340] usb 2-9.2: new high-speed USB device number 7 using xhci_hcd [ 12.746148] usb 2-9.2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 12.746153] usb 2-9.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 12.746615] hub 2-9.2:1.0: USB hub found [ 12.746652] hub 2-9.2:1.0: 4 ports detected [ 12.869338] usb 2-14: new full-speed USB device number 8 using xhci_hcd [ 13.013126] usb 2-14: New USB device found, idVendor=046d, idProduct=c21d, bcdDevice=40.14 [ 13.013131] usb 2-14: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 13.013134] usb 2-14: Product: Gamepad F310 [ 13.013136] usb 2-14: Manufacturer: Logitech [ 13.013139] usb 2-14: SerialNumber: ... [ 13.060664] hidraw: raw HID events driver (C) Jiri Kosina [ 13.066941] usbcore: registered new interface driver usbhid [ 13.066942] usbhid: USB HID core driver [ 13.085823] input: Logitech Gaming Mouse G302 as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:046D:C07F.0001/input/input17 [ 13.085940] hid-generic 0003:046D:C07F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G302] on usb-0000:00:14.0-5/input0 [ 13.086235] input: Logitech Gaming Mouse G302 Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.1/0003:046D:C07F.0002/input/input18 [ 13.099297] usb 2-10.3: new full-speed USB device number 9 using xhci_hcd [ 13.104587] input: Logitech Gamepad F310 as /devices/pci0000:00/0000:00:14.0/usb2/2-14/2-14:1.0/input/input23 [ 13.117301] usb-storage 3-5.4:1.0: USB Mass Storage device detected [ 13.117409] scsi host8: usb-storage 3-5.4:1.0 [ 13.117484] usbcore: registered new interface driver usb-storage [ 13.119763] usbcore: registered new interface driver uas [ 13.142767] input: Logitech Gaming Mouse G302 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.1/0003:046D:C07F.0002/input/input19 [ 13.142836] usbcore: registered new interface driver xpad [ 13.142880] input: Logitech Gaming Mouse G302 System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.1/0003:046D:C07F.0002/input/input20 [ 13.143023] hid-generic 0003:046D:C07F.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G302] on usb-0000:00:14.0-5/input1 [ 13.143244] hid-generic 0003:1770:EF35.0003: hiddev1,hidraw2: USB HID v1.10 Device [ASUS OSD ASUS OSD] on usb-0000:00:14.0-8/input0 [ 13.145874] Bluetooth: Core ver 2.22 [ 13.145893] NET: Registered protocol family 31 [ 13.145894] Bluetooth: HCI device and connection manager initialized [ 13.145897] Bluetooth: HCI socket layer initialized [ 13.145899] Bluetooth: L2CAP socket layer initialized [ 13.145903] Bluetooth: SCO socket layer initialized [ 13.148293] mousedev: PS/2 mouse device common for all mice [ 13.155583] usbcore: registered new interface driver btusb [ 13.209767] usb 2-10.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.00 [ 13.209772] usb 2-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 13.209775] usb 2-10.3: Product: USB Receiver [ 13.209778] usb 2-10.3: Manufacturer: Logitech [ 13.264725] Bluetooth: hci0: BCM: chip id 63 [ 13.265728] Bluetooth: hci0: BCM: features 0x07 [ 13.267970] logitech-djreceiver 0003:046D:C52B.0006: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10.3/input2 [ 13.270385] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.270386] Bluetooth: BNEP filters: protocol multicast [ 13.270389] Bluetooth: BNEP socket layer initialized [ 13.281762] Bluetooth: hci0: ... [ 13.282720] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 13.283669] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-180a.hcd failed with error -2 [ 13.283673] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-180a.hcd not found [ 13.381482] input: Logitech Unifying Device. Wireless PID:200a Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10.3/2-10.3:1.2/0003:046D:C52B.0006/0003:046D:200A.0007/input/input24 [ 13.381642] input: Logitech Unifying Device. Wireless PID:200a Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10.3/2-10.3:1.2/0003:046D:C52B.0006/0003:046D:200A.0007/input/input25 [ 13.381717] input: Logitech Unifying Device. Wireless PID:200a System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10.3/2-10.3:1.2/0003:046D:C52B.0006/0003:046D:200A.0007/input/input26 [ 13.381819] hid-generic 0003:046D:200A.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:200a] on usb-0000:00:14.0-10.3:1 [ 13.383195] input: Logitech Unifying Device. Wireless PID:101a Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10.3/2-10.3:1.2/0003:046D:C52B.0006/0003:046D:101A.0008/input/input30 [ 13.383376] hid-generic 0003:046D:101A.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-10.3:2 [ 13.609128] input: Logitech K350 as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10.3/2-10.3:1.2/0003:046D:C52B.0006/0003:046D:200A.0007/input/input34 [ 13.609311] logitech-hidpp-device 0003:046D:200A.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:14.0-10.3:1 [ 13.676956] input: Logitech Performance MX as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10.3/2-10.3:1.2/0003:046D:C52B.0006/0003:046D:101A.0008/input/input35 [ 13.677150] logitech-hidpp-device 0003:046D:101A.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:00:14.0-10.3:2 [ 14.123107] scsi 8:0:0:0: Direct-Access WD Elements 25A3 1019 PQ: 0 ANSI: 6 [ 14.123593] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 14.123767] sd 8:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16). [ 14.123904] sd 8:0:0:0: [sdc] 7813969920 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 14.123907] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 14.124164] sd 8:0:0:0: [sdc] Write Protect is off [ 14.124168] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 14.124411] sd 8:0:0:0: [sdc] No Caching mode page found [ 14.126073] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 14.857999] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.858038] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 23.179405] sdc: sdc1 [ 23.180793] sd 8:0:0:0: [sdc] Attached SCSI disk [ 36.636876] logitech-hidpp-device 0003:046D:200A.0007: HID++ 1.0 device connected. [ 38.713425] Bluetooth: RFCOMM TTY layer initialized [ 38.713431] Bluetooth: RFCOMM socket layer initialized [ 38.713436] Bluetooth: RFCOMM ver 1.11 [ 40.398796] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 242.158525] usb 2-11: new high-speed USB device number 10 using xhci_hcd [ 242.299220] usb 2-11: New USB device found, idVendor=1058, idProduct=1021, bcdDevice=20.21 [ 242.299225] usb 2-11: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 242.299228] usb 2-11: Product: Ext HDD 1021 [ 242.299231] usb 2-11: Manufacturer: Western Digital [ 242.299233] usb 2-11: SerialNumber: ... [ 242.299825] usb-storage 2-11:1.0: USB Mass Storage device detected [ 242.300075] scsi host9: usb-storage 2-11:1.0 [ 243.327399] scsi 9:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4 [ 243.327895] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 243.328413] sd 9:0:0:0: [sdd] 1953519616 512-byte logical blocks: (1.00 TB/932 GiB) [ 243.329983] sd 9:0:0:0: [sdd] Write Protect is off [ 243.329988] sd 9:0:0:0: [sdd] Mode Sense: 17 00 10 08 [ 243.331565] sd 9:0:0:0: [sdd] No Caching mode page found [ 243.331573] sd 9:0:0:0: [sdd] Assuming drive cache: write through [ 243.344191] sdd: sdd1 [ 243.348559] sd 9:0:0:0: [sdd] Attached SCSI disk [ 245.233018] EXT4-fs (sdd1): warning: maximal mount count reached, running e2fsck is recommended [ 245.239043] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 321.065843] fuse init (API version 7.28) [ 3024.428907] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [ 5424.373597] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [ 9900.363249] usb 2-9.2: USB disconnect, device number 7 [10824.509557] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [11544.113499] usb 2-9.2: new high-speed USB device number 11 using xhci_hcd [11544.220291] usb 2-9.2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [11544.220295] usb 2-9.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [11544.220766] hub 2-9.2:1.0: USB hub found [11544.220792] hub 2-9.2:1.0: 4 ports detected [12870.913174] PM: suspend entry (deep) [12870.913176] PM: Syncing filesystems ... done. [12870.917836] Freezing user space processes ... (elapsed 0.002 seconds) done. [12870.919924] OOM killer disabled. [12870.919925] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [12870.921158] printk: Suspending console(s) (use no_console_suspend to debug) [12870.922448] e1000e: EEE TX LPI TIMER: 00000011 [12870.947165] sd 0:0:0:0: [sda] Synchronizing SCSI cache [12870.947166] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [12870.947362] sd 3:0:0:0: [sdb] Stopping disk [12870.948631] sd 0:0:0:0: [sda] Stopping disk [12871.620071] ACPI: EC: interrupt blocked [12871.651390] ACPI: Preparing to enter system sleep state S3 [12871.857443] ACPI: EC: event blocked [12871.857445] ACPI: EC: EC stopped [12871.857446] PM: Saving platform NVS memory [12871.857894] Disabling non-boot CPUs ... [12871.888828] smpboot: CPU 1 is now offline [12871.942129] smpboot: CPU 2 is now offline [12871.996775] smpboot: CPU 3 is now offline [12872.048724] smpboot: CPU 4 is now offline [12872.102025] smpboot: CPU 5 is now offline [12872.156797] smpboot: CPU 6 is now offline [12872.208630] smpboot: CPU 7 is now offline [12872.261916] smpboot: CPU 8 is now offline [12872.301940] smpboot: CPU 9 is now offline [12872.328548] smpboot: CPU 10 is now offline [12872.381854] smpboot: CPU 11 is now offline [18446744052.726834] [Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -13439515617. Restoring [12872.386473] ACPI: Low-level resume complete [12872.386511] ACPI: EC: EC started [12872.386511] PM: Restoring platform NVS memory [12872.392304] Enabling non-boot CPUs ... [12872.392347] x86: Booting SMP configuration: [12872.392347] smpboot: Booting Node 0 Processor 1 APIC 0x2 [12872.393396] cache: parent cpu1 should not be sleeping [12872.393487] microcode: sig=0x306f2, pf=0x4, revision=0x38 [12872.395458] microcode: updated to revision 0x3d, date = 2018-04-20 [12872.395579] CPU1 is up [12872.395608] smpboot: Booting Node 0 Processor 2 APIC 0x4 [12872.396633] cache: parent cpu2 should not be sleeping [12872.398923] CPU2 is up [12872.398957] smpboot: Booting Node 0 Processor 3 APIC 0x6 [12872.399888] cache: parent cpu3 should not be sleeping [12872.402107] CPU3 is up [12872.402136] smpboot: Booting Node 0 Processor 4 APIC 0x8 [12872.403121] cache: parent cpu4 should not be sleeping [12872.405277] CPU4 is up [12872.405303] smpboot: Booting Node 0 Processor 5 APIC 0xa [12872.406287] cache: parent cpu5 should not be sleeping [12872.408438] CPU5 is up [12872.408464] smpboot: Booting Node 0 Processor 6 APIC 0x1 [12872.409494] cache: parent cpu6 should not be sleeping [12872.409600] microcode: sig=0x306f2, pf=0x4, revision=0x3d [12872.409940] CPU6 is up [12872.409971] smpboot: Booting Node 0 Processor 7 APIC 0x3 [12872.410948] cache: parent cpu7 should not be sleeping [12872.411174] CPU7 is up [12872.411208] smpboot: Booting Node 0 Processor 8 APIC 0x5 [12872.412110] cache: parent cpu8 should not be sleeping [12872.412490] CPU8 is up [12872.412517] smpboot: Booting Node 0 Processor 9 APIC 0x7 [12872.413369] cache: parent cpu9 should not be sleeping [12872.413621] CPU9 is up [12872.413645] smpboot: Booting Node 0 Processor 10 APIC 0x9 [12872.414507] cache: parent cpu10 should not be sleeping [12872.414894] CPU10 is up [12872.414925] smpboot: Booting Node 0 Processor 11 APIC 0xb [12872.415782] cache: parent cpu11 should not be sleeping [12872.416102] CPU11 is up [12872.449069] ACPI: Waking up from system sleep state S3 [12872.449915] ACPI: EC: interrupt unblocked [12872.499407] usb usb2: root hub lost power or was reset [12872.499410] usb usb3: root hub lost power or was reset [12872.499458] usb usb1: root hub lost power or was reset [12872.499542] ACPI: EC: event unblocked [12872.499544] usb usb5: root hub lost power or was reset [12872.499546] usb usb6: root hub lost power or was reset [12872.499557] usb usb7: root hub lost power or was reset [12872.499560] usb usb8: root hub lost power or was reset [12872.499603] usb usb4: root hub lost power or was reset [12872.503365] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [12872.503519] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [12872.503535] sd 0:0:0:0: [sda] Starting disk [12872.503537] sd 3:0:0:0: [sdb] Starting disk [12872.612417] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000). [12872.633902] usb 3-6: Disable of device-initiated U1 failed. [12872.633919] usb 3-6: Disable of device-initiated U2 failed. [12872.633943] usb 3-5: Disable of device-initiated U1 failed. [12872.633960] usb 3-5: Disable of device-initiated U2 failed. [12872.667690] nvme nvme0: Shutdown timeout set to 8 seconds [12872.712273] [drm] SADs count is: -2, don't need to read it [12872.769141] usb 3-6: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [12872.813989] ata8: SATA link down (SStatus 0 SControl 300) [12872.814055] ata7: SATA link down (SStatus 0 SControl 300) [12872.820705] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12872.820748] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [12872.821865] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [12872.821871] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [12872.821875] ata1.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [12872.822074] ata1.00: supports DRM functions and may not be fully accessible [12872.822923] ata1.00: NCQ Send/Recv Log not supported [12872.824411] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [12872.824416] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [12872.824420] ata1.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [12872.824615] ata1.00: supports DRM functions and may not be fully accessible [12872.825014] ata1.00: NCQ Send/Recv Log not supported [12872.826017] ata1.00: configured for UDMA/133 [12872.830942] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [12872.830948] ata4.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [12872.830952] ata4.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [12872.850537] usb 4-1: reset high-speed USB device number 2 using ehci-pci [12872.850547] usb 1-1: reset high-speed USB device number 2 using ehci-pci [12872.867086] ata4.00: NCQ Send/Recv Log not supported [12872.899413] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [12872.899419] ata4.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [12872.899423] ata4.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [12872.935471] ata4.00: NCQ Send/Recv Log not supported [12872.935480] ata4.00: configured for UDMA/133 [12872.965835] usb 3-5: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [12873.150588] usb 2-5: reset full-speed USB device number 2 using xhci_hcd [12873.277175] [drm] Fence fallback timer expired on ring sdma0 [12873.413957] usb 2-9: reset high-speed USB device number 5 using xhci_hcd [12873.484389] usb 3-5.4: Disable of device-initiated U1 failed. [12873.496280] usb 3-5.4: Disable of device-initiated U2 failed. [12873.697286] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [12873.783850] [drm] Fence fallback timer expired on ring sdma0 [12873.824699] [drm] UVD and UVD ENC initialized successfully. [12873.925670] [drm] VCE initialized successfully. [12873.960607] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [12874.223964] usb 2-10: reset high-speed USB device number 6 using xhci_hcd [12874.507286] usb 2-14: reset full-speed USB device number 8 using xhci_hcd [12874.770594] usb 2-8: reset full-speed USB device number 4 using xhci_hcd [12875.077340] usb 3-5.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd [12875.190597] usb 2-9.2: reset high-speed USB device number 11 using xhci_hcd [12875.387294] usb 2-10.3: reset full-speed USB device number 9 using xhci_hcd [12875.495014] usb 2-10.3: device firmware changed [12875.496122] OOM killer enabled. [12875.496124] Restarting tasks ... [12875.497914] usb 2-10.3: USB disconnect, device number 9 [12875.502158] done. [12875.502180] PM: suspend exit [12875.615243] Bluetooth: hci0: BCM: chip id 63 [12875.616254] Bluetooth: hci0: BCM: features 0x07 [12875.632331] Bluetooth: hci0: ... [12875.633317] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [12875.633344] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-180a.hcd failed with error -2 [12875.633348] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-180a.hcd not found [12875.677225] usb 2-10.3: new full-speed USB device number 12 using xhci_hcd [12875.790533] usb 2-10.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.00 [12875.790538] usb 2-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [12875.790541] usb 2-10.3: Product: USB Receiver [12875.790544] usb 2-10.3: Manufacturer: Logitech [12875.806000] logitech-djreceiver 0003:046D:C52B.000B: hiddev2,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-10.3/input2 [12875.852496] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [12875.928615] input: Logitech K350 as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10.3/2-10.3:1.2/0003:046D:C52B.000B/0003:046D:200A.000C/input/input36 [12875.928933] logitech-hidpp-device 0003:046D:200A.000C: input,hidraw4: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:14.0-10.3:1 [12875.936464] input: Logitech Performance MX as /devices/pci0000:00/0000:00:14.0/usb2/2-10/2-10.3/2-10.3:1.2/0003:046D:C52B.000B/0003:046D:101A.000D/input/input37 [12875.937904] logitech-hidpp-device 0003:046D:101A.000D: input,hidraw5: USB HID v1.11 Mouse [Logitech Performance MX] on usb-0000:00:14.0-10.3:2 [12878.218363] logitech-hidpp-device 0003:046D:200A.000C: HID++ 1.0 device connected. [13224.510926] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [13229.644200] usb 2-11: device descriptor read/64, error -110 [13312.072792] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null) [15624.470082] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [18024.424405] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [18375.738427] PM: suspend entry (deep) [18375.738429] PM: Syncing filesystems ... done. [18375.755439] Freezing user space processes ... (elapsed 0.002 seconds) done. [18375.757618] OOM killer disabled. [18375.757618] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [18375.759018] printk: Suspending console(s) (use no_console_suspend to debug) [18375.760792] e1000e: EEE TX LPI TIMER: 00000011 [18375.787500] sd 0:0:0:0: [sda] Synchronizing SCSI cache [18375.787532] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [18375.787692] sd 3:0:0:0: [sdb] Stopping disk [18375.788936] sd 0:0:0:0: [sda] Stopping disk [18376.307839] ACPI: EC: interrupt blocked [18376.341964] ACPI: Preparing to enter system sleep state S3 [18376.547912] ACPI: EC: event blocked [18376.547914] ACPI: EC: EC stopped [18376.547915] PM: Saving platform NVS memory [18376.548393] Disabling non-boot CPUs ... [18376.569290] smpboot: CPU 1 is now offline [18376.590818] smpboot: CPU 2 is now offline [18376.635870] smpboot: CPU 3 is now offline [18376.669399] smpboot: CPU 4 is now offline [18376.702585] smpboot: CPU 5 is now offline [18376.730518] smpboot: CPU 6 is now offline [18376.765153] smpboot: CPU 7 is now offline [18376.795646] smpboot: CPU 8 is now offline [18376.845014] smpboot: CPU 9 is now offline [18376.875625] smpboot: CPU 10 is now offline [18376.924892] smpboot: CPU 11 is now offline [12872.396224] [Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -13478910742. Restoring [18376.929091] ACPI: Low-level resume complete [18376.929128] ACPI: EC: EC started [18376.929129] PM: Restoring platform NVS memory [18376.933840] Enabling non-boot CPUs ... [18376.933886] x86: Booting SMP configuration: [18376.933887] smpboot: Booting Node 0 Processor 1 APIC 0x2 [18376.934960] cache: parent cpu1 should not be sleeping [18376.935053] microcode: sig=0x306f2, pf=0x4, revision=0x38 [18376.937152] CPU1 is up [18376.937183] smpboot: Booting Node 0 Processor 2 APIC 0x4 [18376.938137] cache: parent cpu2 should not be sleeping [18376.940314] CPU2 is up [18376.940342] smpboot: Booting Node 0 Processor 3 APIC 0x6 [18376.941279] cache: parent cpu3 should not be sleeping [18376.943570] CPU3 is up [18376.943605] smpboot: Booting Node 0 Processor 4 APIC 0x8 [18376.944534] cache: parent cpu4 should not be sleeping [18376.946748] CPU4 is up [18376.946774] smpboot: Booting Node 0 Processor 5 APIC 0xa [18376.947668] cache: parent cpu5 should not be sleeping [18376.949825] CPU5 is up [18376.949853] smpboot: Booting Node 0 Processor 6 APIC 0x1 [18376.950786] cache: parent cpu6 should not be sleeping [18376.950886] microcode: sig=0x306f2, pf=0x4, revision=0x3d [18376.951170] CPU6 is up [18376.951197] smpboot: Booting Node 0 Processor 7 APIC 0x3 [18376.952187] cache: parent cpu7 should not be sleeping [18376.952464] CPU7 is up [18376.952490] smpboot: Booting Node 0 Processor 8 APIC 0x5 [18376.953385] cache: parent cpu8 should not be sleeping [18376.953633] CPU8 is up [18376.953657] smpboot: Booting Node 0 Processor 9 APIC 0x7 [18376.954558] cache: parent cpu9 should not be sleeping [18376.954821] CPU9 is up [18376.954848] smpboot: Booting Node 0 Processor 10 APIC 0x9 [18376.955746] cache: parent cpu10 should not be sleeping [18376.956020] CPU10 is up [18376.956044] smpboot: Booting Node 0 Processor 11 APIC 0xb [18376.956944] cache: parent cpu11 should not be sleeping [18376.957301] CPU11 is up [18376.990445] ACPI: Waking up from system sleep state S3 [18376.991394] ACPI: EC: interrupt unblocked [18377.043024] usb usb2: root hub lost power or was reset [18377.043027] usb usb3: root hub lost power or was reset [18377.043102] usb usb4: root hub lost power or was reset [18377.043158] usb usb1: root hub lost power or was reset [18377.043167] usb usb5: root hub lost power or was reset [18377.043170] usb usb6: root hub lost power or was reset [18377.043171] ACPI: EC: event unblocked [18377.043232] usb usb7: root hub lost power or was reset [18377.043235] usb usb8: root hub lost power or was reset [18377.047024] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [18377.047052] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [18377.050888] sd 0:0:0:0: [sda] Starting disk [18377.050893] sd 3:0:0:0: [sdb] Starting disk [18377.156501] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000). [18377.177663] usb 3-6: Disable of device-initiated U1 failed. [18377.177684] usb 3-6: Disable of device-initiated U2 failed. [18377.177712] usb 3-5: Disable of device-initiated U1 failed. [18377.177737] usb 3-5: Disable of device-initiated U2 failed. [18377.208154] nvme nvme0: Shutdown timeout set to 8 seconds [18377.256094] [drm] SADs count is: -2, don't need to read it [18377.312898] usb 3-6: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd [18377.357575] ata7: SATA link down (SStatus 0 SControl 300) [18377.357607] ata8: SATA link down (SStatus 0 SControl 300) [18377.364076] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [18377.364797] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [18377.365459] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [18377.365464] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [18377.365468] ata1.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [18377.365661] ata1.00: supports DRM functions and may not be fully accessible [18377.366471] ata1.00: NCQ Send/Recv Log not supported [18377.367955] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [18377.367961] ata1.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [18377.367965] ata1.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [18377.368159] ata1.00: supports DRM functions and may not be fully accessible [18377.368503] ata1.00: NCQ Send/Recv Log not supported [18377.369294] ata1.00: configured for UDMA/133 [18377.373860] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [18377.373866] ata4.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [18377.373870] ata4.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [18377.394256] usb 1-1: reset high-speed USB device number 2 using ehci-pci [18377.394271] usb 4-1: reset high-speed USB device number 2 using ehci-pci [18377.409870] ata4.00: NCQ Send/Recv Log not supported [18377.442218] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) succeeded [18377.442224] ata4.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [18377.442230] ata4.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [18377.478297] ata4.00: NCQ Send/Recv Log not supported [18377.478307] ata4.00: configured for UDMA/133 [18377.509558] usb 3-5: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [18377.694316] usb 2-5: reset full-speed USB device number 2 using xhci_hcd [18377.810895] [drm] Fence fallback timer expired on ring sdma0 [18377.957662] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [18378.028125] usb 3-5.4: Disable of device-initiated U1 failed. [18378.040021] usb 3-5.4: Disable of device-initiated U2 failed. [18378.220977] usb 2-8: reset full-speed USB device number 4 using xhci_hcd [18378.317564] [drm] Fence fallback timer expired on ring sdma0 [18378.358896] [drm] UVD and UVD ENC initialized successfully. [18378.459868] [drm] VCE initialized successfully. [18378.484307] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [18378.747683] usb 2-10: reset high-speed USB device number 6 using xhci_hcd [18379.030961] usb 2-14: reset full-speed USB device number 8 using xhci_hcd [18379.294316] usb 2-9: reset high-speed USB device number 5 using xhci_hcd [18379.621055] usb 3-5.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd [18379.727682] usb 2-10.3: reset full-speed USB device number 12 using xhci_hcd [18379.924311] usb 2-9.2: reset high-speed USB device number 11 using xhci_hcd [18380.138520] OOM killer enabled. [18380.138522] Restarting tasks ... done. [18380.144372] PM: suspend exit [18380.263248] Bluetooth: hci0: BCM: chip id 63 [18380.264254] Bluetooth: hci0: BCM: features 0x07 [18380.280224] Bluetooth: hci0: ... [18380.281217] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [18380.281244] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-180a.hcd failed with error -2 [18380.281248] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-180a.hcd not found [18408.096238] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [18408.096245] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [18624.401182] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [18629.640981] usb 2-11: device descriptor read/64, error -110 [19371.084790] asus_wmi: Unknown key a0040087 pressed [19373.218069] asus_wmi: Unknown key a0040087 pressed [19373.641357] asus_wmi: Unknown key a0040087 pressed [19377.638034] asus_wmi: Unknown key a0040087 pressed [19381.684741] asus_wmi: Unknown key a0040088 pressed [19383.194864] asus_wmi: Unknown key a0040088 pressed [19384.147937] asus_wmi: Unknown key a0040088 pressed [19386.931365] asus_wmi: Unknown key a0040088 pressed [19391.558038] asus_wmi: Unknown key a0040088 pressed [19394.328082] asus_wmi: Unknown key a0040088 pressed [19396.248040] asus_wmi: Unknown key a0040087 pressed [19397.261371] asus_wmi: Unknown key a0040087 pressed [21024.432191] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [23424.447828] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [23606.933533] usb 2-9.2: USB disconnect, device number 11 [25057.777587] perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79200 [25824.487000] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [28224.514405] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [28994.494590] usb 2-9.2: new high-speed USB device number 13 using xhci_hcd [28994.608079] usb 2-9.2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [28994.608083] usb 2-9.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [28994.608591] hub 2-9.2:1.0: USB hub found [28994.608617] hub 2-9.2:1.0: 4 ports detected [29270.284632] usb 2-9.2: USB disconnect, device number 13 [29308.558114] usb 2-9.2: new high-speed USB device number 14 using xhci_hcd [29308.668211] usb 2-9.2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [29308.668216] usb 2-9.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [29308.668680] hub 2-9.2:1.0: USB hub found [29308.668710] hub 2-9.2:1.0: 4 ports detected [29327.498614] usb 2-9.2: USB disconnect, device number 14 [30624.458053] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [33024.485507] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [33754.651287] perf: interrupt took too long (3159 > 3150), lowering kernel.perf_event_max_sample_rate to 63300 [35424.543011] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [35824.633673] usb 2-9.2: new high-speed USB device number 15 using xhci_hcd [35824.740503] usb 2-9.2: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [35824.740506] usb 2-9.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [35824.741448] hub 2-9.2:1.0: USB hub found [35824.741472] hub 2-9.2:1.0: 4 ports detected [37824.617927] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [40224.669119] usb 2-11: reset high-speed USB device number 10 using xhci_hcd [41265.036588] st: Version 20160209, fixed bufsize 32768, s/g segs 256