[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.25-nrj-desktop-1rosa-x86_64 (XXX@XXX) (gcc version 4.9.2 20140811 (ROSA) (Linaro GCC 4.9-2014.08) ) #1 SMP PREEMPT Tue May 24 16:25:10 UTC 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.25-nrj-desktop-1rosa-x86_64 root=UUID=HASH_D4D-7E88-1803-CE30-51B84F83CF79 ro splash=silent logo.nologo quiet nomodeset resume=UUID=HASH_B7B-3A63-E125-8111-BACAC1522503 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bff90000-0x00000000bff9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bff9e000-0x00000000bffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: System manufacturer System Product Name/Commando, BIOS 1901 12/22/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D6000000 mask FFE000000 uncachable [ 0.000000] 1 base 0D8000000 mask FF8000000 uncachable [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 000000000 mask E00000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: update [mem 0xd6000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xbff90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01f80000, 0x01f80fff] PGTABLE [ 0.000000] BRK [0x01f81000, 0x01f81fff] PGTABLE [ 0.000000] BRK [0x01f82000, 0x01f82fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1ffe00000-0x1ffffffff] [ 0.000000] [mem 0x1ffe00000-0x1ffffffff] page 2M [ 0.000000] BRK [0x01f83000, 0x01f83fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffdfffff] [ 0.000000] [mem 0x1e0000000-0x1ffdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff8ffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M [ 0.000000] [mem 0xbfe00000-0xbff8ffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff] [ 0.000000] [mem 0x100000000-0x1dfffffff] page 2M [ 0.000000] BRK [0x01f84000, 0x01f84fff] PGTABLE [ 0.000000] BRK [0x01f85000, 0x01f85fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36a2c000-0x3750dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FB050 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000BFF90000 000038 (v01 MSTEST TESTONLY 12000822 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000BFF90200 000084 (v02 MSTEST OEMFACP 12000822 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000BFF905C0 00998C (v01 A0693 A0693000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 0x00000000BFF9E000 000040 [ 0.000000] ACPI: APIC 0x00000000BFF90390 00006C (v01 MSTEST OEMAPIC 12000822 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000BFF90400 00003C (v01 MSTEST OEMMCFG 12000822 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000BFF9E040 00007B (v01 MSTEST AMI_OEM 12000822 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BFF99F50 000038 (v01 MSTEST OEMHPET 12000822 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1ffff7000-0x1ffffbfff] [ 0.000000] [ffffea0000000000-ffffea0007ffffff] PMD -> [ffff8801f8600000-ffff8801ff5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff8ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 1834798 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12223 pages used for memmap [ 0.000000] DMA32 zone: 782224 pages, LIFO batch:31 [ 0.000000] Normal zone: 16384 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff90000-0xbff9dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbff9e000-0xbffdffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff8801ffc00000 s100184 r8192 d30888 u524288 [ 0.000000] pcpu-alloc: s100184 r8192 d30888 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1806106 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.25-nrj-desktop-1rosa-x86_64 root=UUID=HASH_D4D-7E88-1803-CE30-51B84F83CF79 ro splash=silent logo.nologo quiet nomodeset resume=UUID=HASH_B7B-3A63-E125-8111-BACAC1522503 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7130500K/7339192K available (7603K kernel code, 1225K rwdata, 3568K rodata, 1352K init, 968K bss, 208692K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU kthread priority: 1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 3002.925 MHz processor [ 0.002010] Calibrating delay loop (skipped), value calculated using timer frequency.. 6005.85 BogoMIPS (lpj=3002925) [ 0.002013] pid_max: default: 32768 minimum: 301 [ 0.002019] ACPI: Core revision 20150410 [ 0.006700] ACPI: All ACPI Tables successfully acquired [ 0.006722] Security Framework initialized [ 0.006733] TOMOYO Linux initialized [ 0.007254] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010388] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011811] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011821] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.012131] Initializing cgroup subsys blkio [ 0.012135] Initializing cgroup subsys memory [ 0.012144] Initializing cgroup subsys devices [ 0.012147] Initializing cgroup subsys freezer [ 0.012150] Initializing cgroup subsys net_cls [ 0.012152] Initializing cgroup subsys bfqio [ 0.012155] Initializing cgroup subsys perf_event [ 0.012157] Initializing cgroup subsys net_prio [ 0.012161] Initializing cgroup subsys hugetlb [ 0.012182] CPU: Physical Processor ID: 0 [ 0.012183] CPU: Processor Core ID: 0 [ 0.012184] mce: CPU supports 6 MCE banks [ 0.012190] CPU0: Thermal monitoring enabled (TM2) [ 0.012193] process: using mwait in idle threads [ 0.012197] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.012198] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.012501] Freeing SMP alternatives memory: 24K (ffffffff81e86000 - ffffffff81e8c000) [ 0.015004] ftrace: allocating 27865 entries in 109 pages [ 0.021414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.033000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (fam: 06, model: 17, stepping: 0a) [ 0.033000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.033000] ... version: 2 [ 0.033000] ... bit width: 40 [ 0.033000] ... generic registers: 2 [ 0.033000] ... value mask: 000000ffffffffff [ 0.033000] ... max period: 000000007fffffff [ 0.033000] ... fixed-purpose events: 3 [ 0.033000] ... event mask: 0000000700000003 [ 0.040082] x86: Booting SMP configuration: [ 0.040085] .... node #0, CPUs: #1 #2 #3 [ 0.080014] x86: Booted up 1 node, 4 CPUs [ 0.080017] smpboot: Total of 4 processors activated (24023.40 BogoMIPS) [ 0.081139] devtmpfs: initialized [ 0.084361] PM: Registering ACPI NVS region [mem 0xbff9e000-0xbffdffff] (270336 bytes) [ 0.084361] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.084361] xor: measuring software checksum speed [ 0.094004] prefetch64-sse: 12536.000 MB/sec [ 0.104006] generic_sse: 11036.000 MB/sec [ 0.104008] xor: using function: prefetch64-sse (12536.000 MB/sec) [ 0.104014] pinctrl core: initialized pinctrl subsystem [ 0.104106] RTC time: 10:59:14, date: 08/01/16 [ 0.104215] NET: Registered protocol family 16 [ 0.109005] cpuidle: using governor ladder [ 0.115004] cpuidle: using governor menu [ 0.115064] ACPI: bus type PCI registered [ 0.115067] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.115153] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.115155] PCI: not using MMCONFIG [ 0.115156] PCI: Using configuration type 1 for base access [ 0.138804] raid6: sse2x1 gen() 4964 MB/s [ 0.155794] raid6: sse2x1 xor() 5007 MB/s [ 0.172795] raid6: sse2x2 gen() 5304 MB/s [ 0.189797] raid6: sse2x2 xor() 6224 MB/s [ 0.206799] raid6: sse2x4 gen() 8632 MB/s [ 0.223796] raid6: sse2x4 xor() 6976 MB/s [ 0.223797] raid6: using algorithm sse2x4 gen() 8632 MB/s [ 0.223798] raid6: .... xor() 6976 MB/s, rmw enabled [ 0.223800] raid6: using ssse3x2 recovery algorithm [ 0.224004] ACPI: Added _OSI(Module Device) [ 0.224004] ACPI: Added _OSI(Processor Device) [ 0.224004] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.224004] ACPI: Added _OSI(Processor Aggregator Device) [ 0.225532] ACPI: Executed 1 blocks of module-level executable AML code [ 0.229428] ACPI: Dynamic OEM Table Load: [ 0.229433] ACPI: SSDT 0xFFFF8801F73EDA00 0001C6 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.229762] ACPI: Dynamic OEM Table Load: [ 0.229766] ACPI: SSDT 0xFFFF8801F73EDC00 00013A (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.230181] ACPI: Dynamic OEM Table Load: [ 0.230185] ACPI: SSDT 0xFFFF8801F73EDE00 00013A (v01 AMI CPU3PM 00000001 INTL 20060113) [ 0.230502] ACPI: Dynamic OEM Table Load: [ 0.230506] ACPI: SSDT 0xFFFF8801F6C4E000 00013A (v01 AMI CPU4PM 00000001 INTL 20060113) [ 0.230821] ACPI: Interpreter enabled [ 0.230828] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 0.230832] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580) [ 0.230840] ACPI: (supports S0 S1 S4 S5) [ 0.230842] ACPI: Using IOAPIC for interrupt routing [ 0.230857] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.231182] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.231571] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.235738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.235743] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.235747] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.235900] PCI host bridge to bus 0000:00 [ 0.235903] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.235905] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.235906] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.235908] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.235910] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.235912] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.235918] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000 [ 0.235992] pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400 [ 0.236022] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.236052] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.236103] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.236136] pci 0000:00:1a.0: reg 0x20: [io 0xa880-0xa89f] [ 0.236192] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.236227] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.236259] pci 0000:00:1a.1: reg 0x20: [io 0xac00-0xac1f] [ 0.236314] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.236359] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.236373] pci 0000:00:1a.7: reg 0x10: [mem 0xf8fffc00-0xf8ffffff] [ 0.236436] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.236467] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.236511] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.236574] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.236606] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.236644] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.236696] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.236728] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.236764] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400 [ 0.236816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.236848] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.236884] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.236917] pci 0000:00:1d.0: reg 0x20: [io 0xa400-0xa41f] [ 0.236974] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.237011] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.237044] pci 0000:00:1d.1: reg 0x20: [io 0xa480-0xa49f] [ 0.237098] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.237133] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.237166] pci 0000:00:1d.2: reg 0x20: [io 0xa800-0xa81f] [ 0.237222] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.237263] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.237277] pci 0000:00:1d.7: reg 0x10: [mem 0xf8fff800-0xf8fffbff] [ 0.237339] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.237370] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.237407] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.237469] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.237517] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100 [ 0.237594] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815] [ 0.237598] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.237601] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.237677] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f [ 0.237688] pci 0000:00:1f.2: reg 0x10: [io 0x9400-0x9407] [ 0.237694] pci 0000:00:1f.2: reg 0x14: [io 0x9080-0x9083] [ 0.237701] pci 0000:00:1f.2: reg 0x18: [io 0x9000-0x9007] [ 0.237707] pci 0000:00:1f.2: reg 0x1c: [io 0x8c00-0x8c03] [ 0.237714] pci 0000:00:1f.2: reg 0x20: [io 0x8880-0x888f] [ 0.237720] pci 0000:00:1f.2: reg 0x24: [io 0x8800-0x880f] [ 0.237742] pci 0000:00:1f.2: PME# supported from D3hot [ 0.237803] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.237813] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff] [ 0.237835] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.237901] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185 [ 0.237911] pci 0000:00:1f.5: reg 0x10: [io 0xa080-0xa087] [ 0.237918] pci 0000:00:1f.5: reg 0x14: [io 0xa000-0xa003] [ 0.237924] pci 0000:00:1f.5: reg 0x18: [io 0x9c00-0x9c07] [ 0.237931] pci 0000:00:1f.5: reg 0x1c: [io 0x9880-0x9883] [ 0.237937] pci 0000:00:1f.5: reg 0x20: [io 0x9800-0x980f] [ 0.237943] pci 0000:00:1f.5: reg 0x24: [io 0x9480-0x948f] [ 0.237965] pci 0000:00:1f.5: PME# supported from D3hot [ 0.238058] pci 0000:01:00.0: [10de:104a] type 00 class 0x030000 [ 0.238067] pci 0000:01:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff] [ 0.238076] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.238085] pci 0000:01:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref] [ 0.238091] pci 0000:01:00.0: reg 0x24: [io 0xbc00-0xbc7f] [ 0.238097] pci 0000:01:00.0: reg 0x30: [mem 0xfac00000-0xfac7ffff pref] [ 0.238162] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300 [ 0.238171] pci 0000:01:00.1: reg 0x10: [mem 0xfacfc000-0xfacfffff] [ 0.238267] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.238270] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.238272] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfacfffff] [ 0.238275] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.238322] pci 0000:04:00.0: [1106:3432] type 00 class 0x0c0330 [ 0.238340] pci 0000:04:00.0: reg 0x10: [mem 0xfafff000-0xfaffffff] [ 0.238436] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.240016] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.240022] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff] [ 0.240104] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185 [ 0.240194] pci 0000:03:00.0: reg 0x24: [mem 0xfaefe000-0xfaefffff] [ 0.240212] pci 0000:03:00.0: reg 0x30: [mem 0xfaee0000-0xfaeeffff pref] [ 0.240255] pci 0000:03:00.0: PME# supported from D3hot [ 0.240314] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 0.240332] pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07] [ 0.240342] pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883] [ 0.240351] pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807] [ 0.240360] pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483] [ 0.240369] pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f] [ 0.240469] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.240483] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.240486] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.240489] pci 0000:00:1c.4: bridge window [mem 0xfae00000-0xfaefffff] [ 0.240549] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000 [ 0.240572] pci 0000:02:00.0: reg 0x10: [mem 0xfadfc000-0xfadfffff 64bit] [ 0.240583] pci 0000:02:00.0: reg 0x18: [io 0xc800-0xc8ff] [ 0.240621] pci 0000:02:00.0: reg 0x30: [mem 0xfadc0000-0xfaddffff pref] [ 0.240669] pci 0000:02:00.0: supports D1 D2 [ 0.240671] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242016] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.242020] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.242024] pci 0000:00:1c.5: bridge window [mem 0xfad00000-0xfadfffff] [ 0.242071] pci 0000:05:00.0: [1957:0086] type 00 class 0x060000 [ 0.242081] pci 0000:05:00.0: reg 0x10: [mem 0xfbf00000-0xfbffffff] [ 0.242088] pci 0000:05:00.0: reg 0x14: [mem 0xfbeff000-0xfbefffff] [ 0.242099] pci 0000:05:00.0: reg 0x18: [mem 0xfb000000-0xfb7fffff 64bit] [ 0.242184] pci 0000:05:01.0: [1106:3038] type 00 class 0x0c0300 [ 0.242231] pci 0000:05:01.0: reg 0x20: [io 0xe880-0xe89f] [ 0.242265] pci 0000:05:01.0: supports D1 D2 [ 0.242267] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242309] pci 0000:05:01.1: [1106:3038] type 00 class 0x0c0300 [ 0.242348] pci 0000:05:01.1: reg 0x20: [io 0xec00-0xec1f] [ 0.242383] pci 0000:05:01.1: supports D1 D2 [ 0.242384] pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242426] pci 0000:05:01.2: [1106:3104] type 00 class 0x0c0320 [ 0.242440] pci 0000:05:01.2: reg 0x10: [mem 0xfbefec00-0xfbefecff] [ 0.242511] pci 0000:05:01.2: supports D1 D2 [ 0.242512] pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242568] pci 0000:05:02.0: [1131:7146] type 00 class 0x048000 [ 0.242580] pci 0000:05:02.0: reg 0x10: [mem 0xfbefe800-0xfbefe9ff] [ 0.242666] pci 0000:05:04.0: [11ab:4320] type 00 class 0x020000 [ 0.242681] pci 0000:05:04.0: reg 0x10: [mem 0xfbef8000-0xfbefbfff] [ 0.242689] pci 0000:05:04.0: reg 0x14: [io 0xe400-0xe4ff] [ 0.242725] pci 0000:05:04.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref] [ 0.242751] pci 0000:05:04.0: supports D1 D2 [ 0.242752] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242796] pci 0000:05:05.0: [1102:0004] type 00 class 0x040100 [ 0.242809] pci 0000:05:05.0: reg 0x10: [io 0xe080-0xe0bf] [ 0.242870] pci 0000:05:05.0: supports D1 D2 [ 0.242906] pci 0000:05:05.1: [1102:7003] type 00 class 0x098000 [ 0.242918] pci 0000:05:05.1: reg 0x10: [io 0xe800-0xe807] [ 0.242979] pci 0000:05:05.1: supports D1 D2 [ 0.243022] pci 0000:05:05.2: [1102:4001] type 00 class 0x0c0010 [ 0.243036] pci 0000:05:05.2: reg 0x10: [mem 0xfbefe000-0xfbefe7ff] [ 0.243045] pci 0000:05:05.2: reg 0x14: [mem 0xfbef4000-0xfbef7fff] [ 0.243102] pci 0000:05:05.2: supports D1 D2 [ 0.243104] pci 0000:05:05.2: PME# supported from D0 D1 D2 D3hot [ 0.243173] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.243176] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.243179] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfbffffff] [ 0.243184] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.243186] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.243188] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.243189] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.243191] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.243591] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.243635] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.243676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.243718] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.243759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.243801] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.243842] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.243883] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.243928] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.244015] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.244016] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.244019] vgaarb: loaded [ 0.244020] vgaarb: bridge control possible 0000:01:00.0 [ 0.244214] SCSI subsystem initialized [ 0.244233] libata version 3.00 loaded. [ 0.244233] ACPI: bus type USB registered [ 0.244233] usbcore: registered new interface driver usbfs [ 0.244233] usbcore: registered new interface driver hub [ 0.244233] usbcore: registered new device driver usb [ 0.244233] PCI: Using ACPI for IRQ routing [ 0.249376] PCI: pci_cache_line_size set to 64 bytes [ 0.249461] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.249462] e820: reserve RAM buffer [mem 0xbff90000-0xbfffffff] [ 0.249562] NetLabel: Initializing [ 0.249563] NetLabel: domain hash size = 128 [ 0.249564] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.249578] NetLabel: unlabeled traffic allowed by default [ 0.249609] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.249612] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.249615] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.252033] Switched to clocksource hpet [ 0.258841] pnp: PnP ACPI init [ 0.258925] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.258929] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.258993] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.259190] pnp 00:02: [dma 2] [ 0.259229] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.259285] system 00:03: [io 0x0290-0x0297] has been reserved [ 0.259288] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.259417] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.259420] system 00:04: [io 0x0800-0x087f] could not be reserved [ 0.259422] system 00:04: [io 0x0480-0x04bf] has been reserved [ 0.259424] system 00:04: [mem 0xffafe000-0xffb0cbff] could not be reserved [ 0.259426] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.259428] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.259430] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.259432] system 00:04: [mem 0xfff00000-0xfffffffe] has been reserved [ 0.259434] system 00:04: [mem 0xfebfe000-0xfebfec00] has been reserved [ 0.259437] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.259521] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.259523] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.259526] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.259574] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.259638] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved [ 0.259641] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.259778] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.259780] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.259783] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.259785] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.259787] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.259879] pnp: PnP ACPI: found 9 devices [ 0.268075] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.268092] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.268095] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.268102] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.268108] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.268118] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment [ 0.268123] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.268125] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.268127] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.268129] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.268131] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.268133] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.268135] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.268137] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 0.268144] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.268148] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.268151] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.268153] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.268156] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0600000-0xc06000ff] [ 0.268160] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.268163] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.268166] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfacfffff] [ 0.268168] pci 0000:00:01.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.268171] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.268174] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.268177] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff] [ 0.268180] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.268185] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.268187] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 0.268191] pci 0000:00:1c.4: bridge window [mem 0xfae00000-0xfaefffff] [ 0.268194] pci 0000:00:1c.4: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.268199] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.268201] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff] [ 0.268205] pci 0000:00:1c.5: bridge window [mem 0xfad00000-0xfadfffff] [ 0.268208] pci 0000:00:1c.5: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.268213] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.268216] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.268219] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfbffffff] [ 0.268226] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.268228] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.268230] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.268231] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.268233] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff window] [ 0.268235] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.268236] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfacfffff] [ 0.268238] pci_bus 0000:01: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref] [ 0.268240] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.268242] pci_bus 0000:04: resource 1 [mem 0xfaf00000-0xfaffffff] [ 0.268243] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref] [ 0.268245] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.268247] pci_bus 0000:03: resource 1 [mem 0xfae00000-0xfaefffff] [ 0.268248] pci_bus 0000:03: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.268250] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.268252] pci_bus 0000:02: resource 1 [mem 0xfad00000-0xfadfffff] [ 0.268253] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 0.268255] pci_bus 0000:05: resource 0 [io 0xe000-0xefff] [ 0.268257] pci_bus 0000:05: resource 1 [mem 0xfb000000-0xfbffffff] [ 0.268259] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.268260] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.268262] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.268264] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.268265] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff window] [ 0.268292] NET: Registered protocol family 2 [ 0.268476] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.268710] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.269051] TCP: Hash tables configured (established 65536 bind 65536) [ 0.269095] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.269143] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.269222] NET: Registered protocol family 1 [ 0.394873] pci 0000:01:00.0: Video device with shadowed ROM [ 0.394884] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.394976] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.394980] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.395249] PCI: CLS 32 bytes, default 64 [ 0.395298] Trying to unpack rootfs image as initramfs... [ 0.564361] Freeing initrd memory: 11144K (ffff880036a2c000 - ffff88003750e000) [ 0.564373] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.564375] software IO TLB [mem 0xbbf90000-0xbff90000] (64MB) mapped at [ffff8800bbf90000-ffff8800bff8ffff] [ 0.564570] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.564584] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.564596] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.564609] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07 [ 0.564679] microcode: Microcode Update Driver: v2.00 <XXX@XXX>, Peter Oruba [ 0.564946] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.565309] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.566958] zpool: loaded [ 0.566960] zbud: loaded [ 0.567104] VFS: Disk quotas dquot_6.6.0 [ 0.567141] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.569661] bounce: pool size: 64 pages [ 0.569700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.569771] io scheduler noop registered [ 0.569778] io scheduler deadline registered [ 0.569810] io scheduler cfq registered [ 0.569839] io scheduler bfq registered (default) [ 0.569840] BFQ I/O-scheduler: v7r8 [ 0.570334] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.570350] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.570394] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.570395] vesafb: scrolling: redraw [ 0.570397] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.570411] vesafb: framebuffer at 0xd7000000, mapped to 0xffffc90001000000, using 3072k, total 3072k [ 0.594111] Console: switching to colour frame buffer device 128x48 [ 0.617515] fb0: VESA VGA frame buffer device [ 0.617529] intel_idle: does not run on family 6 model 23 [ 0.617600] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.617603] ACPI: Power Button [PWRB] [ 0.617640] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.617642] ACPI: Power Button [PWRF] [ 0.617883] GHES: HEST is not enabled! [ 0.617950] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.618305] Linux agpgart interface v0.103 [ 0.620245] brd: module loaded [ 0.620383] ahci 0000:03:00.0: version 3.0 [ 0.631038] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.631043] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.631363] scsi host0: ahci [ 0.631502] scsi host1: ahci [ 0.631543] ata1: SATA max UDMA/133 abar m8192@0xfaefe000 port 0xfaefe100 irq 16 [ 0.631546] ata2: SATA max UDMA/133 abar m8192@0xfaefe000 port 0xfaefe180 irq 16 [ 0.631619] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.631620] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.632114] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.632211] mousedev: PS/2 mouse device common for all mice [ 0.632380] rtc_cmos 00:01: RTC can wake from S4 [ 0.632478] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.632498] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.632540] device-mapper: uevent: version 1.0.3 [ 0.632596] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: XXX@XXX [ 0.632606] ledtrig-cpu: registered to indicate activity on CPUs [ 0.632718] Key type dns_resolver registered [ 0.632720] mpls_gso: MPLS GSO support [ 0.632983] registered taskstats version 1 [ 0.633456] Btrfs loaded [ 0.633828] Magic number: 12:587:981 [ 0.633904] rtc_cmos 00:01: setting system clock to 2016-08-01 10:59:15 UTC (1470049155) [ 0.633961] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.633962] EDD information not available. [ 0.634025] PM: Checking hibernation image partition UUID=HASH_B7B-3A63-E125-8111-BACAC1522503 [ 0.662431] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.936030] ata1: SATA link down (SStatus 0 SControl 300) [ 0.936067] ata2: SATA link down (SStatus 0 SControl 300) [ 0.936092] PM: Hibernation image not present or could not be loaded. [ 0.936674] Freeing unused kernel memory: 1352K (ffffffff81d34000 - ffffffff81e86000) [ 0.936676] Write protecting the kernel read-only data: 12288k [ 0.937058] Freeing unused kernel memory: 576K (ffff880001770000 - ffff880001800000) [ 0.937281] Freeing unused kernel memory: 528K (ffff880001b7c000 - ffff880001c00000) [ 0.939533] systemd[1]: Inserted module 'autofs4' [ 0.941938] NET: Registered protocol family 10 [ 0.942197] systemd[1]: Inserted module 'ipv6' [ 0.942519] random: systemd urandom read with 3 bits of entropy available [ 0.943215] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 0.943350] systemd[1]: Detected architecture x86-64. [ 0.943353] systemd[1]: Running in initial RAM disk. [ 0.943372] systemd[1]: Set hostname to ... [ 0.981246] systemd[1]: Created slice -.slice. [ 0.981257] systemd[1]: Starting -.slice. [ 0.981282] systemd[1]: Listening on udev Kernel Socket. [ 0.981289] systemd[1]: Starting udev Kernel Socket. [ 0.981301] systemd[1]: Reached target Swap. [ 0.981307] systemd[1]: Starting Swap. [ 0.981337] systemd[1]: Listening on Journal Socket (/dev/log). [ 0.981345] systemd[1]: Starting Journal Socket (/dev/log). [ 0.981356] systemd[1]: Reached target Timers. [ 0.981362] systemd[1]: Starting Timers. [ 0.981427] systemd[1]: Created slice System Slice. [ 0.981436] systemd[1]: Starting System Slice. [ 0.981498] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 0.981506] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 0.981518] systemd[1]: Reached target Slices. [ 0.981525] systemd[1]: Starting Slices. [ 0.981552] systemd[1]: Listening on udev Control Socket. [ 0.981560] systemd[1]: Starting udev Control Socket. [ 0.981620] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. [ 0.981628] systemd[1]: Starting system-systemd\x2dhibernate\x2dresume.slice. [ 0.981653] systemd[1]: Listening on Journal Audit Socket. [ 0.981660] systemd[1]: Starting Journal Audit Socket. [ 0.981696] systemd[1]: Listening on Journal Socket. [ 0.981704] systemd[1]: Starting Journal Socket. [ 0.982092] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 0.982113] systemd[1]: Reached target Sockets. [ 0.982120] systemd[1]: Starting Sockets. [ 0.982154] systemd[1]: Started dracut ask for additional cmdline parameters. [ 0.982599] systemd[1]: Starting dracut cmdline hook... [ 0.982989] systemd[1]: Starting Journal Service... [ 0.983625] systemd[1]: Starting Setup Virtual Console... [ 0.984176] systemd[1]: Starting Load Kernel Modules... [ 0.984575] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 0.986918] systemd[1]: Started Load Kernel Modules. [ 0.987630] systemd[1]: Starting Apply Kernel Variables... [ 0.988056] systemd[1]: Starting Create Static Device Nodes in /dev... [ 0.995141] systemd[1]: Started Apply Kernel Variables. [ 0.995366] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.007071] systemd[1]: Started Journal Service. [ 1.173618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.173759] ehci-pci: EHCI PCI platform driver [ 1.173897] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.173904] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.173915] ehci-pci 0000:00:1a.7: debug port 1 [ 1.177769] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 1.177809] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 1.177829] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf8fffc00 [ 1.178958] scsi host2: pata_jmicron [ 1.180245] scsi host3: pata_jmicron [ 1.180618] ata3: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 1.180620] ata4: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 1.183024] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.185124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.185127] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.185129] usb usb1: Product: EHCI Host Controller [ 1.185130] usb usb1: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 ehci_hcd [ 1.185132] usb usb1: SerialNumber: ... [ 1.185248] hub 1-0:1.0: USB hub found [ 1.185255] hub 1-0:1.0: 4 ports detected [ 1.185443] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.185450] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 1.185640] xhci_hcd 0000:04:00.0: hcc params 0x002810eb hci version 0x96 quirks 0x00080080 [ 1.185726] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.185728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.185730] usb usb2: Product: xHCI Host Controller [ 1.185732] usb usb2: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 xhci-hcd [ 1.185733] usb usb2: SerialNumber: ... [ 1.185865] hub 2-0:1.0: USB hub found [ 1.185875] hub 2-0:1.0: 1 port detected [ 1.185963] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.185967] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 1.185985] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.186029] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.186052] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.186054] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.186056] usb usb3: Product: xHCI Host Controller [ 1.186058] usb usb3: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 xhci-hcd [ 1.186059] usb usb3: SerialNumber: ... [ 1.186163] hub 3-0:1.0: USB hub found [ 1.186174] hub 3-0:1.0: 4 ports detected [ 1.186362] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 1.186373] ehci-pci 0000:00:1d.7: debug port 1 [ 1.190258] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.190275] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8fff800 [ 1.196016] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.196054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.196061] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.196062] usb usb4: Product: EHCI Host Controller [ 1.196064] usb usb4: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 ehci_hcd [ 1.196066] usb usb4: SerialNumber: ... [ 1.196160] hub 4-0:1.0: USB hub found [ 1.196168] hub 4-0:1.0: 6 ports detected [ 1.196356] ata_piix 0000:00:1f.2: version 2.13 [ 1.196414] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.197763] scsi host4: ata_piix [ 1.197860] scsi host5: ata_piix [ 1.197908] ata5: SATA max UDMA/133 cmd 0x9400 ctl 0x9080 bmdma 0x8880 irq 19 [ 1.197912] ata6: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8888 irq 19 [ 1.197978] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.198678] scsi host6: ata_piix [ 1.198756] scsi host7: ata_piix [ 1.198796] ata7: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9800 irq 19 [ 1.198799] ata8: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9808 irq 19 [ 1.236044] firewire_ohci 0000:05:05.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.236208] ehci-pci 0000:05:01.2: EHCI Host Controller [ 1.236215] ehci-pci 0000:05:01.2: new USB bus registered, assigned bus number 5 [ 1.236258] ehci-pci 0000:05:01.2: irq 20, io mem 0xfbefec00 [ 1.237411] Uniform Multi-Platform E-IDE driver [ 1.242019] ehci-pci 0000:05:01.2: USB 2.0 started, EHCI 1.00 [ 1.242062] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.242063] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.242064] usb usb5: Product: EHCI Host Controller [ 1.242065] usb usb5: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 ehci_hcd [ 1.242066] usb usb5: SerialNumber: ... [ 1.242180] hub 5-0:1.0: USB hub found [ 1.242185] hub 5-0:1.0: 4 ports detected [ 1.242685] uhci_hcd: USB Universal Host Controller Interface driver [ 1.242779] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.242784] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 6 [ 1.242788] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.242805] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a880 [ 1.244840] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.244841] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.244842] usb usb6: Product: UHCI Host Controller [ 1.244844] usb usb6: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.244845] usb usb6: SerialNumber: ... [ 1.244943] hub 6-0:1.0: USB hub found [ 1.244948] hub 6-0:1.0: 2 ports detected [ 1.245122] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.245126] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 7 [ 1.245130] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.245147] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ac00 [ 1.245185] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.245186] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.245187] usb usb7: Product: UHCI Host Controller [ 1.245189] usb usb7: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.245190] usb usb7: SerialNumber: ... [ 1.245280] hub 7-0:1.0: USB hub found [ 1.245285] hub 7-0:1.0: 2 ports detected [ 1.245420] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.245424] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8 [ 1.245429] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.245444] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a400 [ 1.245482] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.245483] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.245484] usb usb8: Product: UHCI Host Controller [ 1.245485] usb usb8: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.245486] usb usb8: SerialNumber: ... [ 1.245579] hub 8-0:1.0: USB hub found [ 1.245584] hub 8-0:1.0: 2 ports detected [ 1.245718] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.245722] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9 [ 1.245728] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.245744] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a480 [ 1.245783] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.245784] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.245785] usb usb9: Product: UHCI Host Controller [ 1.245786] usb usb9: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.245787] usb usb9: SerialNumber: ... [ 1.245877] hub 9-0:1.0: USB hub found [ 1.245882] hub 9-0:1.0: 2 ports detected [ 1.246032] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.246042] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10 [ 1.246047] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.246062] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a800 [ 1.246100] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.246101] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.246102] usb usb10: Product: UHCI Host Controller [ 1.246104] usb usb10: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.246105] usb usb10: SerialNumber: ... [ 1.246197] hub 10-0:1.0: USB hub found [ 1.246202] hub 10-0:1.0: 2 ports detected [ 1.246344] uhci_hcd 0000:05:01.0: UHCI Host Controller [ 1.246348] uhci_hcd 0000:05:01.0: new USB bus registered, assigned bus number 11 [ 1.246353] uhci_hcd 0000:05:01.0: detected 2 ports [ 1.246375] uhci_hcd 0000:05:01.0: irq 22, io base 0x0000e880 [ 1.246413] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.246414] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.246415] usb usb11: Product: UHCI Host Controller [ 1.246416] usb usb11: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.246418] usb usb11: SerialNumber: ... [ 1.246509] hub 11-0:1.0: USB hub found [ 1.246515] hub 11-0:1.0: 2 ports detected [ 1.246643] uhci_hcd 0000:05:01.1: UHCI Host Controller [ 1.246647] uhci_hcd 0000:05:01.1: new USB bus registered, assigned bus number 12 [ 1.246652] uhci_hcd 0000:05:01.1: detected 2 ports [ 1.246667] uhci_hcd 0000:05:01.1: irq 23, io base 0x0000ec00 [ 1.246707] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.246708] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.246709] usb usb12: Product: UHCI Host Controller [ 1.246710] usb usb12: Manufacturer: Linux 4.1.25-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.246711] usb usb12: SerialNumber: ... [ 1.246808] hub 12-0:1.0: USB hub found [ 1.246813] hub 12-0:1.0: 2 ports detected [ 1.386739] ata3.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100 [ 1.386743] ata3.00: 976773168 sectors, multi 0: LBA48 [ 1.387875] ata3.01: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100 [ 1.387878] ata3.01: 234441648 sectors, multi 0: LBA48 [ 1.461484] ata3.00: configured for UDMA/100 [ 1.468601] ata3.01: configured for UDMA/100 [ 1.468718] scsi 2:0:0:0: Direct-Access ATA ST3500630A F PQ: 0 ANSI: 5 [ 1.468928] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.468987] scsi 2:0:1:0: Direct-Access ATA WDC WD1200JB-00E 5R15 PQ: 0 ANSI: 5 [ 1.468999] sd 2:0:0:0: [sda] Write Protect is off [ 1.469017] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.469188] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.469196] sd 2:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.469231] sd 2:0:1:0: [sdb] Write Protect is off [ 1.469234] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.469250] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.487014] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 1.487018] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 1.488568] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd [ 1.499704] usb 3-2: New USB device found, idVendor=174c, idProduct=55aa [ 1.499708] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 1.499710] usb 3-2: Product: Silicon-Power [ 1.499713] usb 3-2: Manufacturer: PHD 3.0 [ 1.499715] usb 3-2: SerialNumber: ... [ 1.501025] sda: sda1 [ 1.501637] usb-storage 3-2:1.0: USB Mass Storage device detected [ 1.501723] usb-storage 3-2:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 1.501766] scsi host8: usb-storage 3-2:1.0 [ 1.501844] usbcore: registered new interface driver usb-storage [ 1.502099] usbcore: registered new interface driver uas [ 1.513642] ata7: SATA link down (SStatus 0 SControl 300) [ 1.524306] ata8: SATA link down (SStatus 0 SControl 300) [ 1.567015] tsc: Refined TSC clocksource calibration: 3002.926 MHz [ 1.567019] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2b4911713c5, max_idle_ns: 440795227682 ns [ 1.594052] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > [ 1.594081] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.594390] sd 2:0:1:0: [sdb] Attached SCSI disk [ 1.600737] usb 2-1: New USB device found, idVendor=2109, idProduct=0811 [ 1.600743] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.600745] usb 2-1: Product: USB2.0 Hub [ 1.601425] hub 2-1:1.0: USB hub found [ 1.601566] hub 2-1:1.0: 4 ports detected [ 1.602374] usb 1-3: New USB device found, idVendor=05e3, idProduct=0606 [ 1.602378] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.602381] usb 1-3: Product: USB2.0 Hub [ 1.602785] hub 1-3:1.0: USB hub found [ 1.603346] hub 1-3:1.0: 4 ports detected [ 1.671015] usb 9-1: new full-speed USB device number 2 using uhci_hcd [ 1.737087] firewire_core 0000:05:05.2: created device fw0: GUID 00023c00910427f7, S400 [ 1.818656] ata6.00: SATA link down (SStatus 0 SControl 300) [ 1.818667] ata6.01: SATA link down (SStatus 0 SControl 300) [ 1.870014] usb 2-1.1: new high-speed USB device number 3 using xhci_hcd [ 1.943658] usb 2-1.1: New USB device found, idVendor=04cf, idProduct=8818 [ 1.943662] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.943664] usb 2-1.1: Product: USB Mass Storage Device [ 1.943667] usb 2-1.1: Manufacturer: Myson Century, Inc. [ 1.943669] usb 2-1.1: SerialNumber: ... [ 1.944835] usb-storage 2-1.1:1.0: USB Mass Storage device detected [ 1.944928] scsi host9: usb-storage 2-1.1:1.0 [ 1.969058] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.969071] ata5.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.975426] ata5.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133 [ 1.975429] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.975436] ata5.01: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100 [ 1.997338] ata5.00: configured for UDMA/133 [ 2.003118] ata5.01: configured for UDMA/100 [ 2.003780] scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5 [ 2.003974] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.003976] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 2.004874] sd 4:0:0:0: [sdc] Write Protect is off [ 2.004878] scsi 4:0:1:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5 [ 2.004881] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.015469] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.041083] sdc: sdc1 sdc2 sdc3 [ 2.041360] sd 4:0:0:0: [sdc] Attached SCSI disk [ 2.059714] sr 4:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.059719] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.059881] sr 4:0:1:0: Attached scsi CD-ROM sr0 [ 2.175019] usb 10-2: new full-speed USB device number 2 using uhci_hcd [ 2.182352] random: nonblocking pool is initialized [ 2.199074] usb 9-1: New USB device found, idVendor=0a12, idProduct=0001 [ 2.199079] usb 9-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.408019] usb 9-2: new full-speed USB device number 3 using uhci_hcd [ 2.503292] scsi 8:0:0:0: Direct-Access PHD 3.0 Silicon-Power 0 PQ: 0 ANSI: 6 [ 2.503655] sd 8:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.503658] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 2.504248] sd 8:0:0:0: [sdd] Write Protect is off [ 2.504252] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 2.504884] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.543038] usb 10-2: New USB device found, idVendor=04a9, idProduct=260a [ 2.543042] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.543045] usb 10-2: Product: Canon CAPT USB Printer [ 2.543047] usb 10-2: Manufacturer: Canon [ 2.543050] usb 10-2: SerialNumber: ... [ 2.567082] Switched to clocksource tsc [ 2.569032] usb 9-2: New USB device found, idVendor=09da, idProduct=9090 [ 2.569036] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.569039] usb 9-2: Product: USB Device [ 2.569041] usb 9-2: Manufacturer: A4TECH [ 2.573140] hidraw: raw HID events driver (C) Jiri Kosina [ 2.578243] usbcore: registered new interface driver usbhid [ 2.578245] usbhid: USB HID core driver [ 2.578951] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/0003:09DA:9090.0001/input/input3 [ 2.629142] hid-generic 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.1-2/input0 [ 2.629340] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.1/0003:09DA:9090.0002/input/input4 [ 2.629428] hid-generic 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.1-2/input1 [ 2.699177] PM: Starting manual resume from disk [ 2.699180] PM: Hibernation image partition 8:21 present [ 2.699181] PM: Looking for hibernation image. [ 2.771175] PM: Image not found (code -22) [ 2.771177] PM: Hibernation image not present or could not be loaded. [ 2.802151] sdd: sdd1 [ 2.803770] sd 8:0:0:0: [sdd] Attached SCSI disk [ 2.948344] scsi 9:0:0:0: Direct-Access WDC WD80 0JB-00JJC0 05.0 PQ: 0 ANSI: 0 CCS [ 2.948714] sd 9:0:0:0: [sde] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.948835] sd 9:0:0:0: [sde] Write Protect is off [ 2.948838] sd 9:0:0:0: [sde] Mode Sense: 00 14 00 00 [ 2.948953] sd 9:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.953236] sde: sde1 [ 2.953920] sd 9:0:0:0: [sde] Attached SCSI disk [ 4.525139] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 4.817292] systemd-journald[133]: Received SIGTERM from PID 1 (systemd). [ 5.370802] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 5.627216] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 5.627248] systemd[1]: Inserted module 'ip_tables' [ 6.180335] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/mandrake_firstime.service with real service [ 6.180378] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/checkflashboot.service with real service [ 6.180466] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/netconsole.service with real service [ 6.180494] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/wlan.service with real service [ 6.180517] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/wine.service with real service [ 6.180553] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/mandrake_everytime.service with real service [ 6.180575] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/pxe.service with real service [ 6.180608] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/xinetd.service with real service [ 6.180641] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/virtualbox.service with real service [ 6.180671] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/network.service with real service [ 6.180694] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/apmd.service with real service [ 6.180729] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/preload.service with real service [ 6.180756] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/mandi.service with real service [ 6.180790] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/pppoe.service with real service [ 6.180812] systemd-sysv-generator[479]: Overwriting existing symlink /run/systemd/generator.late/pptp.service with real service [ 6.903396] audit_printk_skb: 117 callbacks suppressed [ 7.732182] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 8.113184] systemd-journald[496]: Received request to flush runtime journal from PID 1 [ 8.613899] systemd-journald[496]: File /var/log/journal/bf1155e6e7853ea7ecbf7dbb56bb436a/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 10.605547] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.543079] [drm] Initialized drm 1.1.0 20060810 [ 11.598573] saa7146: register extension 'budget_ci dvb' [ 11.598687] saa7146: found saa7146 @ mem ffffc90000e52800 (revision 1, irq 23) (0x13c2,0x1019) [ 11.598689] saa7146 (0): dma buffer size 192512 [ 11.598690] DVB: registering new adapter (TT-Budget S2-3200 PCI) [ 11.616911] adapter has MAC addr = XXX [ 11.825013] Registered IR keymap rc-tt-1500 [ 11.825131] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/rc/rc0/input5 [ 11.825178] rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/rc/rc0 [ 11.905816] sky2: driver version 1.30 [ 11.905912] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2 [ 11.906215] sky2 0000:02:00.0 eth0: addr XXX [ 12.221383] Bluetooth: Core ver 2.20 [ 12.221399] NET: Registered protocol family 31 [ 12.221401] Bluetooth: HCI device and connection manager initialized [ 12.221405] Bluetooth: HCI socket layer initialized [ 12.221407] Bluetooth: L2CAP socket layer initialized [ 12.221412] Bluetooth: SCO socket layer initialized [ 12.264462] stb0899_attach: Attaching STB0899 [ 12.468346] stb6100_attach: Attaching STB6100 [ 12.512349] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 12.512420] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20150410/utaddress-254) [ 12.512425] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.535305] usblp 10-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 12.535327] usbcore: registered new interface driver usblp [ 12.550716] LNBx2x attached on addr=8 [ 12.550722] budget_ci dvb 0000:05:02.0: DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)... [ 12.554152] snd_hda_intel 0000:01:00.1: Disabling MSI [ 12.554160] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 12.558126] usbcore: registered new interface driver btusb [ 12.566560] skge: 1.14 addr 0xfbef8000 irq 19 chip Yukon-Lite rev 9 [ 12.566747] skge 0000:05:04.0 eth1: addr XXX [ 12.569575] gameport gameport0: EMU10K1 is pci0000:05:05.1/gameport0, io 0xe800, speed 1046kHz [ 12.570602] snd_emu10k1 0000:05:05.0: Installing spdif_bug patch: SB Audigy 2 Platinum [SB0240P] [ 12.781506] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6 [ 12.781567] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7 [ 12.786820] kvm: disabled by bios [ 12.955397] nvidia: module license 'NVIDIA' taints kernel. [ 12.955400] Disabling lock debugging due to kernel taint [ 12.989735] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 12.991285] nvidia-nvlink: Nvlink Core is being initialized, major device number 249 [ 12.991637] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0 [ 12.991645] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 361.42 Tue Mar 22 18:10:58 PDT 2016 [ 13.005737] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 13.483923] iTCO_vendor_support: vendor-support=0 [ 13.487479] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.487517] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) [ 13.487650] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 13.506912] sky2 0000:02:00.0 enp2s0: renamed from eth0 [ 13.512480] skge 0000:05:04.0 enp5s4: renamed from eth1 [ 13.692373] audit_printk_skb: 33 callbacks suppressed [ 13.959434] Adding 4094972k swap on /dev/sdb5. Priority:-1 extents:1 across:4094972k FS [ 17.567873] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 22.468237] audit_printk_skb: 12 callbacks suppressed [ 23.061255] skge 0000:05:04.0 enp5s4: enabling interface [ 23.064269] IPv6: ADDRCONF(NETDEV_UP): enp5s4: link is not ready [ 23.067474] sky2 0000:02:00.0 enp2s0: enabling interface [ 23.067553] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 23.145537] w83627ehf: Found W83627DHG chip at 0x290 [ 23.145567] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB_.PCI0.SBRG.SIOR.HWRE) (20150410/utaddress-254) [ 23.145573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.030357] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.030360] Bluetooth: BNEP filters: protocol multicast [ 24.030364] Bluetooth: BNEP socket layer initialized [ 25.944069] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both [ 25.944086] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 29.134511] audit_printk_skb: 54 callbacks suppressed [ 29.155426] NET: Registered protocol family 17 [ 34.108309] IPv6: ADDRCONF(NETDEV_UP): enp5s4: link is not ready [ 34.275630] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 34.555604] Netfilter messages via NETLINK v0.30. [ 34.557670] ctnetlink v0.93: registering with nfnetlink. [ 35.180119] usblp1: removed [ 35.191095] usblp 10-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 37.163486] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 37.200877] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 41.093386] audit_printk_skb: 147 callbacks suppressed [ 41.871910] usb 3-2: reset SuperSpeed USB device number 2 using xhci_hcd [ 42.166760] vboxdrv: Found 4 processor cores [ 42.167477] vboxdrv: fAsync=0 offMin=0x507 offMax=0x185d [ 42.267580] vboxdrv: TSC mode is Synchronous, tentative frequency 3002926288 Hz [ 42.267582] vboxdrv: Successfully loaded version 5.0.24_OSE (interface 0x00240000) [ 42.269942] VBoxNetFlt: Successfully started. [ 42.272070] VBoxNetAdp: Successfully started. [ 45.376268] NVRM: Your system is not currently configured to drive a VGA console [ 45.376273] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 45.376275] NVRM: requires the use of a text-mode VGA console. Use of other console [ 45.376277] NVRM: drivers including, but not limited to, vesafb, may result in [ 45.376279] NVRM: corruption and stability problems, and is not supported. [ 45.383687] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 361.42 Tue Mar 22 17:29:54 PDT 2016 [ 45.384218] nvidia-modeset: Allocated GPU:0 (GPU-HASH_5F5-683C-0FD8-C762-E94372547923) @ PCI:0000:01:00.0 [ 45.514325] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device VGA-0 [ 77.705635] systemd-journald[496]: File /var/log/journal/bf1155e6e7853ea7ecbf7dbb56bb436a/user-XXXX.journal corrupted or uncleanly shut down, renaming and replacing. [ 80.484612] fuse init (API version 7.23) [ 84.255729] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device VGA-0 [ 84.549144] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device VGA-0 [ 85.703415] Bluetooth: RFCOMM TTY layer initialized [ 85.703423] Bluetooth: RFCOMM socket layer initialized [ 85.703429] Bluetooth: RFCOMM ver 1.11 [ 88.761659] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device VGA-0 [ 91.692523] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device VGA-0 [ 344.704556] usblp1: removed [ 356.430221] usblp 10-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 360.703076] usb 10-2: USB disconnect, device number 2 [ 360.703218] usblp1: removed [ 363.338019] usb 10-2: new full-speed USB device number 3 using uhci_hcd [ 363.504065] usb 10-2: New USB device found, idVendor=04a9, idProduct=260a [ 363.504070] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 363.504073] usb 10-2: Product: Canon CAPT USB Printer [ 363.504075] usb 10-2: Manufacturer: Canon [ 363.504078] usb 10-2: SerialNumber: ... [ 363.511114] usblp 10-2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 364.852803] usblp1: removed [ 364.863136] usblp 10-2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 405.092235] usblp1: removed [ 405.105876] usblp 10-2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 405.237226] lp: driver loaded but no devices found [ 405.260157] ppdev: user-space parallel port driver [ 462.275580] usblp1: removed [ 472.708183] usblp 10-2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 485.203073] usb 10-2: USB disconnect, device number 3 [ 485.203207] usblp1: removed [ 486.305021] usb 10-2: new full-speed USB device number 4 using uhci_hcd [ 486.472035] usb 10-2: New USB device found, idVendor=04a9, idProduct=260a [ 486.472040] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 486.472043] usb 10-2: Product: Canon CAPT USB Printer [ 486.472045] usb 10-2: Manufacturer: Canon [ 486.472048] usb 10-2: SerialNumber: ... [ 486.478172] usblp 10-2:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 504.703069] usb 10-2: USB disconnect, device number 4 [ 504.703203] usblp1: removed [ 519.074018] usb 8-2: new full-speed USB device number 2 using uhci_hcd [ 519.241040] usb 8-2: New USB device found, idVendor=04a9, idProduct=260a [ 519.241045] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 519.241048] usb 8-2: Product: Canon CAPT USB Printer [ 519.241050] usb 8-2: Manufacturer: Canon [ 519.241053] usb 8-2: SerialNumber: ... [ 519.248094] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 520.543058] usblp1: removed [ 520.555124] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 562.437029] usblp1: removed [ 572.750132] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 625.779177] usblp1: removed [ 635.860142] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 652.907677] usblp1: removed [ 663.568166] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 663.581280] usblp1: removed [ 671.614175] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 671.624473] usblp1: removed [ 679.649163] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 679.662296] usblp1: removed [ 687.678161] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 694.428682] usblp1: removed [ 704.909177] usblp 8-2:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x260A [ 1257.579287] nvidia-modeset: WARNING: GPU:0: Unable to read EDID for display device VGA-0 [ 1326.216752] ide-cd driver 5.00 [ 1326.231568] ide-gd driver 1.18 [ 1326.264109] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1328.656432] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1328.656509] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 1328.656563] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1328.656625] sr 4:0:1:0: Attached scsi generic sg3 type 5 [ 1328.656688] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 1328.656750] sd 9:0:0:0: Attached scsi generic sg5 type 0 [ 1332.227347] traps: monitor-get-edi[19394] trap invalid opcode ip:7ff4ad7fbecf sp:7ffc56b781d0 error:0 in libx86.so.1[7ff4ad7f4000+20000] [ 1332.295047] traps: monitor-get-edi[19396] trap invalid opcode ip:7f994fd16ecf sp:7ffc53d3bcf0 error:0 in libx86.so.1[7f994fd0f000+20000] [ 1332.298597] traps: monitor-get-edi[19398] trap invalid opcode ip:7f2d6fa33ecf sp:7ffc09be9b00 error:0 in libx86.so.1[7f2d6fa2c000+20000]