Probe #758a1a42b6 of Supermicro H8DM8-2 Desktop Computer

Log: dmesg

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-1160.88.1.el7.centos.plus.x86_64 (XXX@XXX) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-44) (GCC) ) #1 SMP Wed Mar 8 15:36:36 UTC 2023 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-1160.88.1.el7.centos.plus.x86_64 root=UUID=HASH_B0B-ABD4-0E5F-59C1-58EC6F77DBC5 ro crashkernel=auto rhgb quiet [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffbffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dffc0000-0x00000000dffcdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dffce000-0x00000000dfffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Supermicro H8DM8-2/H8DM8-2, BIOS 080014 06/02/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000220000000 aka 8704M [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdffc0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffffffffff200780] [ 0.000000] Base memory trampoline at [ffff93bc80099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0xdd6a7000, 0xdd6a7fff] PGTABLE [ 0.000000] BRK [0xdd6a8000, 0xdd6a8fff] PGTABLE [ 0.000000] BRK [0xdd6a9000, 0xdd6a9fff] PGTABLE [ 0.000000] BRK [0xdd6aa000, 0xdd6aafff] PGTABLE [ 0.000000] BRK [0xdd6ab000, 0xdd6abfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x34f1f000-0x36787fff] [ 0.000000] Early table checksum verification disabled [ 0.000000] ACPI: RSDP 00000000000f9ad0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000dffc0000 00038 (v01 S M C OEMRSDT 06000902 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000dffc0200 00084 (v02 S M C OEMFACP 06000902 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000dffc04a0 04FF8 (v01 H8DM8 H8DM8000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000dffce000 00040 [ 0.000000] ACPI: APIC 00000000dffc0390 000C6 (v01 S M C OEMAPIC 06000902 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000dffce040 000BA (v01 S M C SMC_OEM 06000902 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000dffc54a0 00128 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000dffc55d0 0143C (v01 S M C POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff] [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x21fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x21fffffff] -> [mem 0x00000000-0x21fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21ffd7000-0x21fffdfff] [ 0.000000] Reserving 161MB of memory at 672MB for crashkernel (System RAM: 8191MB) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x21fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdffbffff] [ 0.000000] node 0: [mem 0x100000000-0x21fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21fffffff] [ 0.000000] On node 0 totalpages: 2096990 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14271 pages used for memmap [ 0.000000] DMA32 zone: 913344 pages, LIFO batch:31 [ 0.000000] Normal zone: 18432 pages used for memmap [ 0.000000] Normal zone: 1179648 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 12 CPUs, 4 hotplug CPUs [ 0.000000] NODE_DATA(1) allocated [mem 0x21ff65000-0x21ff8bfff] [ 0.000000] NODE_DATA(1) on node 0 [ 0.000000] Initmem setup node 1 [mem 0x00000000-0xffffffffffffffff] [ 0.000000] On node 1 totalpages: 0 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdffc0000-0xdffcdfff] [ 0.000000] PM: Registered nosave memory: [mem 0xdffce000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xff6fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff700000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] Detected CPU family 10h model 2 [ 0.000000] Warning: AMD Processor - this hardware has not undergone upstream testing. Please consult http://wiki.centos.org/FAQ for more information [ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:2 [ 0.000000] percpu: Embedded 38 pages/cpu s118784 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s118784 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 09 10 11 [1] 04 05 06 07 -- -- -- -- [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 2064202 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-1160.88.1.el7.centos.plus.x86_64 root=UUID=HASH_B0B-ABD4-0E5F-59C1-58EC6F77DBC5 ro crashkernel=auto rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xf632000000-0xf633ffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] [ 0.000000] Memory: 5426324k/8912896k available (8064k kernel code, 524936k absent, 474156k reserved, 5682k data, 2176k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=12. [ 0.000000] NR_IRQS:327936 nr_irqs:520 0 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2110.631 MHz processor [ 0.000161] Calibrating delay loop (skipped), value calculated using timer frequency.. 4221.26 BogoMIPS (lpj=2110631) [ 0.000165] pid_max: default: 32768 minimum: 301 [ 0.000222] Security Framework initialized [ 0.000236] SELinux: Initializing. [ 0.000253] SELinux: Starting in permissive mode [ 0.000255] Yama: becoming mindful. [ 0.001418] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.006321] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.008523] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008549] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.008994] Initializing cgroup subsys memory [ 0.009007] Initializing cgroup subsys devices [ 0.009010] Initializing cgroup subsys freezer [ 0.009012] Initializing cgroup subsys net_cls [ 0.009015] Initializing cgroup subsys blkio [ 0.009017] Initializing cgroup subsys perf_event [ 0.009020] Initializing cgroup subsys hugetlb [ 0.009022] Initializing cgroup subsys pids [ 0.009025] Initializing cgroup subsys net_prio [ 0.009067] tseg: 0000000000 [ 0.009092] LVT offset 0 assigned for vector 0xf9 [ 0.009099] process: using AMD E400 aware idle routine [ 0.009104] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.009106] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 [ 0.009108] tlb_flushall_shift: 6 [ 0.009115] FEATURE SPEC_CTRL Present (Implicit) [ 0.009116] FEATURE IBPB_SUPPORT Present (Implicit) [ 0.009118] Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization [ 0.009123] Spectre V2 : Mitigation: IBP disabled [ 0.009124] Filling RSB on context switch [ 0.022587] Freeing SMP alternatives: 28k freed [ 0.024703] ACPI: Core revision 20130517 [ 0.027945] ACPI: All ACPI Tables successfully acquired [ 0.028488] ftrace: allocating 29940 entries in 117 pages [ 0.045301] Switched APIC routing to physical flat. [ 0.045877] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.055897] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 2352 (fam: 10, model: 02, stepping: 02) [ 0.157712] Performance Events: AMD PMU driver. [ 0.157719] ... version: 0 [ 0.157720] ... bit width: 48 [ 0.157721] ... generic registers: 4 [ 0.157723] ... value mask: 0000ffffffffffff [ 0.157724] ... max period: 00007fffffffffff [ 0.157725] ... fixed-purpose events: 0 [ 0.157726] ... event mask: 000000000000000f [ 0.160019] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.162645] process: System has AMD C1E enabled [ 0.162667] process: Switch to broadcast mode on CPU1 [ 0.165419] process: Switch to broadcast mode on CPU2 [ 0.167930] process: Switch to broadcast mode on CPU3 [ 0.160124] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.168461] smpboot: CPU 4 Converting physical 0 to logical die 1 [ 0.247904] process: Switch to broadcast mode on CPU4 [ 0.250691] process: Switch to broadcast mode on CPU5 [ 0.253469] process: Switch to broadcast mode on CPU6 [ 0.168004] smpboot: Booting Node 1, Processors #4 #5 #6 #7 [ 0.256135] Brought up 8 CPUs [ 0.256137] smpboot: Max logical packages: 3 [ 0.256141] smpboot: Total of 8 processors activated (33769.67 BogoMIPS) [ 0.260982] process: Switch to broadcast mode on CPU7 [ 0.261509] process: Switch to broadcast mode on CPU0 [ 0.290667] random: fast init done [ 0.294328] node 0 initialised, 621870 pages in 33ms [ 0.294723] devtmpfs: initialized [ 0.294856] x86/mm: Memory block size: 128MB [ 0.301120] EVM: security.selinux [ 0.301122] EVM: security.ima [ 0.301123] EVM: security.capability [ 0.301235] PM: Registering ACPI NVS region [mem 0xdffce000-0xdfffffff] (204800 bytes) [ 0.303063] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.303068] pinctrl core: initialized pinctrl subsystem [ 0.303150] RTC time: 19:06:59, date: 02/03/25 [ 0.303268] NET: Registered protocol family 16 [ 0.303503] node 0 link 2: io port [1000, ffffff] [ 0.303507] TOM: 00000000e0000000 aka 3584M [ 0.303510] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.303512] node 0 link 2: mmio [e0000000, efffffff] ==> none [ 0.303515] node 0 link 2: mmio [f0000000, ffe0ffff] [ 0.303518] node 0 link 2: mmio [a0000, bffff] [ 0.303521] TOM2: 0000000220000000 aka 8704M [ 0.303523] bus: [bus 00-7f] on node 0 link 2 [ 0.303525] bus: 00 [io 0x0000-0xffff] [ 0.303527] bus: 00 [mem 0xf0000000-0xffffffff] [ 0.303528] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.303530] bus: 00 [mem 0x220000000-0xfcffffffff] [ 0.303643] ACPI: bus type PCI registered [ 0.303646] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.303754] PCI: Using configuration type 1 for base access [ 0.303755] PCI: Using configuration type 1 for extended access [ 0.304360] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.304361] mtrr: probably your BIOS does not setup all CPUs. [ 0.304362] mtrr: corrected configuration. [ 0.311275] ipmi:dmi: Base address is zero, assuming no IPMI interface [ 0.311423] ACPI: Added _OSI(Module Device) [ 0.311425] ACPI: Added _OSI(Processor Device) [ 0.311426] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.311428] ACPI: Added _OSI(Processor Aggregator Device) [ 0.311430] ACPI: Added _OSI(Linux-Dell-Video) [ 0.312517] ACPI: EC: Look up EC in DSDT [ 0.313705] ACPI: Executed 1 blocks of module-level executable AML code [ 0.317114] ACPI: Interpreter enabled [ 0.317136] ACPI: (supports S0 S1 S4 S5) [ 0.317138] ACPI: Using IOAPIC for interrupt routing [ 0.317179] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.317286] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.325266] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.325275] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.325282] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.325588] PCI host bridge to bus 0000:00 [ 0.325592] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.325595] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.325597] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] [ 0.325600] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window] [ 0.325602] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.325605] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.325607] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.325609] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.325613] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.325636] pci 0000:00:00.0: [10de:0369] type 00 class 0x050000 [ 0.325984] pci 0000:00:01.0: [10de:0364] type 00 class 0x060100 [ 0.326047] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.326136] pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500 [ 0.326157] pci 0000:00:01.1: reg 0x10: [io 0xdc00-0xdc3f] [ 0.326184] pci 0000:00:01.1: reg 0x20: [io 0x2d00-0x2d3f] [ 0.326190] pci 0000:00:01.1: reg 0x24: [io 0x2e00-0x2e3f] [ 0.326270] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.326332] pci 0000:00:01.1: System wakeup disabled by ACPI [ 0.326387] pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310 [ 0.326399] pci 0000:00:02.0: reg 0x10: [mem 0xfeafb000-0xfeafbfff] [ 0.326483] pci 0000:00:02.0: supports D1 D2 [ 0.326495] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.326583] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.326634] pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320 [ 0.326648] pci 0000:00:02.1: reg 0x10: [mem 0xfeafac00-0xfeafacff] [ 0.326693] pci 0000:00:02.1: supports D1 D2 [ 0.326696] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.326743] pci 0000:00:02.1: System wakeup disabled by ACPI [ 0.326797] pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a [ 0.326824] pci 0000:00:04.0: reg 0x20: [io 0xffa0-0xffaf] [ 0.326865] pci 0000:00:04.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.326870] pci 0000:00:04.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.326873] pci 0000:00:04.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.326875] pci 0000:00:04.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.326968] pci 0000:00:05.0: [10de:037f] type 00 class 0x010185 [ 0.326977] pci 0000:00:05.0: reg 0x10: [io 0xd480-0xd487] [ 0.326982] pci 0000:00:05.0: reg 0x14: [io 0xd400-0xd403] [ 0.326987] pci 0000:00:05.0: reg 0x18: [io 0xd080-0xd087] [ 0.326991] pci 0000:00:05.0: reg 0x1c: [io 0xd000-0xd003] [ 0.326996] pci 0000:00:05.0: reg 0x20: [io 0xcc00-0xcc0f] [ 0.327001] pci 0000:00:05.0: reg 0x24: [mem 0xfeaf9000-0xfeaf9fff] [ 0.327112] pci 0000:00:05.1: [10de:037f] type 00 class 0x010185 [ 0.327122] pci 0000:00:05.1: reg 0x10: [io 0xc880-0xc887] [ 0.327127] pci 0000:00:05.1: reg 0x14: [io 0xc800-0xc803] [ 0.327132] pci 0000:00:05.1: reg 0x18: [io 0xc480-0xc487] [ 0.327137] pci 0000:00:05.1: reg 0x1c: [io 0xc400-0xc403] [ 0.327142] pci 0000:00:05.1: reg 0x20: [io 0xc080-0xc08f] [ 0.327146] pci 0000:00:05.1: reg 0x24: [mem 0xfeaf8000-0xfeaf8fff] [ 0.327268] pci 0000:00:05.2: [10de:037f] type 00 class 0x010185 [ 0.327276] pci 0000:00:05.2: reg 0x10: [io 0xc000-0xc007] [ 0.327281] pci 0000:00:05.2: reg 0x14: [io 0xbc00-0xbc03] [ 0.327286] pci 0000:00:05.2: reg 0x18: [io 0xb880-0xb887] [ 0.327291] pci 0000:00:05.2: reg 0x1c: [io 0xb800-0xb803] [ 0.327295] pci 0000:00:05.2: reg 0x20: [io 0xb480-0xb48f] [ 0.327300] pci 0000:00:05.2: reg 0x24: [mem 0xfeaf7000-0xfeaf7fff] [ 0.327418] pci 0000:00:06.0: [10de:0370] type 01 class 0x060401 [ 0.327490] pci 0000:00:06.0: System wakeup disabled by ACPI [ 0.327553] pci 0000:00:08.0: [10de:0373] type 00 class 0x068000 [ 0.327567] pci 0000:00:08.0: reg 0x10: [mem 0xfeaf6000-0xfeaf6fff] [ 0.327572] pci 0000:00:08.0: reg 0x14: [io 0xb400-0xb407] [ 0.327577] pci 0000:00:08.0: reg 0x18: [mem 0xfeafa800-0xfeafa8ff] [ 0.327582] pci 0000:00:08.0: reg 0x1c: [mem 0xfeafa400-0xfeafa40f] [ 0.327627] pci 0000:00:08.0: supports D1 D2 [ 0.327637] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327716] pci 0000:00:08.0: System wakeup disabled by ACPI [ 0.327767] pci 0000:00:09.0: [10de:0373] type 00 class 0x068000 [ 0.327782] pci 0000:00:09.0: reg 0x10: [mem 0xfeaf5000-0xfeaf5fff] [ 0.327797] pci 0000:00:09.0: reg 0x14: [io 0xb080-0xb087] [ 0.327806] pci 0000:00:09.0: reg 0x18: [mem 0xfeafa000-0xfeafa0ff] [ 0.327811] pci 0000:00:09.0: reg 0x1c: [mem 0xfeaf4c00-0xfeaf4c0f] [ 0.327890] pci 0000:00:09.0: supports D1 D2 [ 0.327894] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.327960] pci 0000:00:09.0: System wakeup disabled by ACPI [ 0.328010] pci 0000:00:0a.0: [10de:0376] type 01 class 0x060400 [ 0.328049] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328102] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 0.328164] pci 0000:00:0d.0: [10de:0378] type 01 class 0x060400 [ 0.328207] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328267] pci 0000:00:0d.0: System wakeup disabled by ACPI [ 0.328322] pci 0000:00:0e.0: [10de:0375] type 01 class 0x060400 [ 0.328361] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328427] pci 0000:00:0e.0: System wakeup disabled by ACPI [ 0.328484] pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400 [ 0.328520] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328580] pci 0000:00:0f.0: System wakeup disabled by ACPI [ 0.328642] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.328755] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.328853] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.328948] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.329087] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.329193] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 0.329333] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 0.329485] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 0.329582] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 0.329683] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 0.329883] pci 0000:01:05.0: [1002:515e] type 00 class 0x030000 [ 0.329895] pci 0000:01:05.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref] [ 0.329922] pci 0000:01:05.0: reg 0x14: [io 0xe000-0xe0ff] [ 0.329939] pci 0000:01:05.0: reg 0x18: [mem 0xfebf0000-0xfebfffff] [ 0.329968] pci 0000:01:05.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.330023] pci 0000:01:05.0: supports D1 D2 [ 0.330116] pci 0000:00:06.0: PCI bridge to [bus 01] (subtractive decode) [ 0.330128] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.330131] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.330134] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.330137] pci 0000:00:06.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.330140] pci 0000:00:06.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.330142] pci 0000:00:06.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode) [ 0.330144] pci 0000:00:06.0: bridge window [io 0x03c0-0x03df window] (subtractive decode) [ 0.330147] pci 0000:00:06.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.330149] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.330152] pci 0000:00:06.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.330154] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.330216] pci 0000:02:00.0: [1033:0125] type 01 class 0x060400 [ 0.330358] pci 0000:02:00.0: supports D1 [ 0.330362] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.330459] pci 0000:02:00.1: [1033:0125] type 01 class 0x060400 [ 0.330576] pci 0000:02:00.1: supports D1 [ 0.330581] pci 0000:02:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.330687] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.330697] pci 0000:00:0a.0: PCI bridge to [bus 02-04] [ 0.330779] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.330909] pci 0000:02:00.1: PCI bridge to [bus 04] [ 0.330991] pci 0000:00:0d.0: PCI bridge to [bus 05] [ 0.331041] pci 0000:00:0e.0: PCI bridge to [bus 06] [ 0.331082] pci 0000:00:0f.0: PCI bridge to [bus 07] [ 0.331952] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 [ 0.332056] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.332152] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.332252] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.332356] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.332458] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.332566] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.332687] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 0.332789] ACPI: PCI Interrupt Link [LUB0] (IRQs 21 22 23) *7 [ 0.332890] ACPI: PCI Interrupt Link [LMAD] (IRQs 20) *11 [ 0.333000] ACPI: PCI Interrupt Link [LUB2] (IRQs 21 22 23) *10 [ 0.333099] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 0.333203] ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *0, disabled. [ 0.333301] ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *11 [ 0.333405] ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *5 [ 0.333513] ACPI: PCI Interrupt Link [LSA0] (IRQs 21 22 23) *11 [ 0.333618] ACPI: PCI Interrupt Link [LSA1] (IRQs 21 22 23) *5 [ 0.333741] ACPI: PCI Interrupt Link [LATA] (IRQs 21 22 23) *0, disabled. [ 0.333840] ACPI: PCI Interrupt Link [LSA2] (IRQs 21 22 23) *10 [ 0.334081] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.334083] vgaarb: loaded [ 0.334085] vgaarb: bridge control possible 0000:01:05.0 [ 0.334229] SCSI subsystem initialized [ 0.334269] ACPI: bus type USB registered [ 0.334298] usbcore: registered new interface driver usbfs [ 0.334314] usbcore: registered new interface driver hub [ 0.334360] usbcore: registered new device driver usb [ 0.334504] EDAC MC: Ver: 3.0.0 [ 0.334712] PCI: Using ACPI for IRQ routing [ 0.334715] PCI: pci_cache_line_size set to 64 bytes [ 0.334770] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.334772] e820: reserve RAM buffer [mem 0xdffc0000-0xdfffffff] [ 0.334974] NetLabel: Initializing [ 0.334976] NetLabel: domain hash size = 128 [ 0.334977] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.335001] NetLabel: unlabeled traffic allowed by default [ 0.335234] Switched to clocksource refined-jiffies [ 0.344228] pnp: PnP ACPI init [ 0.344257] ACPI: bus type PNP registered [ 0.344594] pnp 00:00: [dma 0 disabled] [ 0.344689] pnp 00:00: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.344922] pnp 00:01: [dma 0 disabled] [ 0.345026] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.345670] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.345673] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.345677] system 00:02: [io 0x2000-0x207f] could not be reserved [ 0.345679] system 00:02: [io 0x2080-0x20ff] has been reserved [ 0.345682] system 00:02: [io 0x2400-0x247f] has been reserved [ 0.345685] system 00:02: [io 0x2480-0x24ff] has been reserved [ 0.345688] system 00:02: [io 0x2800-0x287f] has been reserved [ 0.345690] system 00:02: [io 0x2880-0x28ff] has been reserved [ 0.345693] system 00:02: [io 0x2c00-0x2c7f] has been reserved [ 0.345695] system 00:02: [io 0x2c80-0x2cff] has been reserved [ 0.345699] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.345702] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.345705] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved [ 0.345708] system 00:02: [mem 0xfea80000-0xfeabffff] has been reserved [ 0.345711] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.345716] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.345802] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.345946] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.345949] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.345952] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.346097] system 00:05: [io 0x0290-0x029f] has been reserved [ 0.346101] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.346186] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.346190] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.346410] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.346413] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.346416] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.346419] system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.346422] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.346425] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.346724] pnp: PnP ACPI: found 8 devices [ 0.346726] ACPI: bus type PNP unregistered [ 0.353878] Switched to clocksource acpi_pm [ 0.353911] pci 0000:00:06.0: PCI bridge to [bus 01] [ 0.353916] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.353921] pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.353925] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 0.353930] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.353943] pci 0000:02:00.1: PCI bridge to [bus 04] [ 0.353956] pci 0000:00:0a.0: PCI bridge to [bus 02-04] [ 0.353962] pci 0000:00:0d.0: PCI bridge to [bus 05] [ 0.353968] pci 0000:00:0e.0: PCI bridge to [bus 06] [ 0.353973] pci 0000:00:0f.0: PCI bridge to [bus 07] [ 0.353982] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.353985] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.353987] pci_bus 0000:00: resource 6 [io 0x03b0-0x03bb window] [ 0.353990] pci_bus 0000:00: resource 7 [io 0x03c0-0x03df window] [ 0.353992] pci_bus 0000:00: resource 8 [io 0x0d00-0xffff window] [ 0.353995] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.353998] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000dffff window] [ 0.354000] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff window] [ 0.354003] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.354006] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.354009] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref] [ 0.354011] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window] [ 0.354014] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window] [ 0.354016] pci_bus 0000:01: resource 6 [io 0x03b0-0x03bb window] [ 0.354019] pci_bus 0000:01: resource 7 [io 0x03c0-0x03df window] [ 0.354021] pci_bus 0000:01: resource 8 [io 0x0d00-0xffff window] [ 0.354024] pci_bus 0000:01: resource 9 [mem 0x000a0000-0x000bffff window] [ 0.354027] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000dffff window] [ 0.354029] pci_bus 0000:01: resource 11 [mem 0xf0000000-0xfebfffff window] [ 0.354081] NET: Registered protocol family 2 [ 0.354488] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.355026] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.355568] TCP: Hash tables configured (established 65536 bind 65536) [ 0.355637] TCP: reno registered [ 0.355658] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.355754] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.355963] NET: Registered protocol family 1 [ 0.356353] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 0.932329] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.932542] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.932595] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.932674] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.932754] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.932817] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.932909] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.933013] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.933094] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.933194] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.933294] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.933356] pci 0000:01:05.0: Boot video device [ 0.933364] PCI: CLS 64 bytes, default 64 [ 0.933445] Unpacking initramfs... [ 1.348446] Freeing initrd memory: 24996k freed [ 1.360414] PCI-DMA: Disabling AGP. [ 1.361942] PCI-DMA: aperture base @ d4000000 size 65536 KB [ 1.361944] PCI-DMA: using GART IOMMU. [ 1.361948] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.369101] LVT offset 1 assigned for vector 0x400 [ 1.369114] IBS: LVT offset 1 assigned [ 1.369158] perf: AMD IBS detected (0x00000007) [ 1.370676] sha1_ssse3: Neither AVX nor AVX2 nor SSSE3/SHA-NI is available/usable. [ 1.370680] sha256_ssse3: Neither AVX nor SSSE3/SHA-NI is available/usable. [ 1.371208] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 1.371318] Initialise system trusted keyring [ 1.371374] type=2000 audit(1738609619.236:1): initialized [ 1.405731] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.405734] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.408254] zpool: loaded [ 1.408258] zbud: loaded [ 1.408565] VFS: Disk quotas dquot_6.5.2 [ 1.408619] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.409028] Key type big_key registered [ 1.409032] SELinux: Registering netfilter hooks [ 1.411696] NET: Registered protocol family 38 [ 1.411705] Key type asymmetric registered [ 1.411709] Asymmetric key parser 'x509' registered [ 1.411759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.411866] io scheduler noop registered [ 1.411870] io scheduler deadline registered (default) [ 1.411910] io scheduler cfq registered [ 1.411914] io scheduler mq-deadline registered [ 1.411919] io scheduler kyber registered [ 1.412189] pcieport 0000:00:0a.0: irq 24 for MSI/MSI-X [ 1.412261] pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X [ 1.412331] pcieport 0000:00:0e.0: irq 26 for MSI/MSI-X [ 1.412399] pcieport 0000:00:0f.0: irq 27 for MSI/MSI-X [ 1.412513] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.412523] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.412564] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.412812] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.412818] ACPI: Power Button [PWRB] [ 1.412886] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.412889] ACPI: Power Button [PWRF] [ 1.412937] ACPI: processor limited to max C-state 1 [ 1.413291] GHES: HEST is not enabled! [ 1.413480] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.434040] 00:00: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.454648] 00:01: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.455344] Non-volatile memory driver v1.3 [ 1.455403] Linux agpgart interface v0.103 [ 1.455549] crash memory driver: version 1.1 [ 1.455735] rdac: device handler registered [ 1.455817] hp_sw: device handler registered [ 1.455821] emc: device handler registered [ 1.455926] alua: device handler registered [ 1.456081] libphy: Fixed MDIO Bus: probed [ 1.456151] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.456156] ehci-pci: EHCI PCI platform driver [ 1.456356] ehci-pci 0000:00:02.1: EHCI Host Controller [ 1.456429] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.456439] ehci-pci 0000:00:02.1: debug port 1 [ 1.456480] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 1.456502] ehci-pci 0000:00:02.1: irq 22, io mem 0xfeafac00 [ 1.462053] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.462114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10 [ 1.462116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.462119] usb usb1: Product: EHCI Host Controller [ 1.462121] usb usb1: Manufacturer: Linux 3.10.0-1160.88.1.el7.centos.plus.x86_64 ehci_hcd [ 1.462123] usb usb1: SerialNumber: ... [ 1.462288] hub 1-0:1.0: USB hub found [ 1.462298] hub 1-0:1.0: 10 ports detected [ 1.462590] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.462597] ohci-pci: OHCI PCI platform driver [ 1.462736] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 1.462808] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.462839] ohci-pci 0000:00:02.0: irq 23, io mem 0xfeafb000 [ 1.515102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 3.10 [ 1.515105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.515107] usb usb2: Product: OHCI PCI host controller [ 1.515109] usb usb2: Manufacturer: Linux 3.10.0-1160.88.1.el7.centos.plus.x86_64 ohci_hcd [ 1.515111] usb usb2: SerialNumber: ... [ 1.515260] hub 2-0:1.0: USB hub found [ 1.515269] hub 2-0:1.0: 10 ports detected [ 1.515544] uhci_hcd: USB Universal Host Controller Interface driver [ 1.515624] usbcore: registered new interface driver usbserial_generic [ 1.515634] usbserial: USB Serial support registered for generic [ 1.515691] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.518211] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.518217] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.518359] mousedev: PS/2 mouse device common for all mice [ 1.518639] rtc_cmos 00:03: RTC can wake from S4 [ 1.518894] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.518926] rtc_cmos 00:03: alarms up to one year, y3k, 114 bytes nvram [ 1.519028] cpuidle: using governor menu [ 1.519609] hidraw: raw HID events driver (C) Jiri Kosina [ 1.519779] usbcore: registered new interface driver usbhid [ 1.519781] usbhid: USB HID core driver [ 1.519871] drop_monitor: Initializing network drop monitor service [ 1.519910] Netfilter messages via NETLINK v0.30. [ 1.520009] TCP: cubic registered [ 1.520015] Initializing XFRM netlink socket [ 1.520197] NET: Registered protocol family 10 [ 1.520562] NET: Registered protocol family 17 [ 1.520571] mpls_gso: MPLS GSO support [ 1.520951] mce: Using 6 MCE banks [ 1.521191] microcode: CPU0: patch_level=0x01000095 [ 1.521199] microcode: CPU1: patch_level=0x01000095 [ 1.521216] microcode: CPU2: patch_level=0x01000095 [ 1.521238] microcode: CPU3: patch_level=0x01000095 [ 1.521260] microcode: CPU4: patch_level=0x01000095 [ 1.521282] microcode: CPU5: patch_level=0x01000095 [ 1.521307] microcode: CPU6: patch_level=0x01000095 [ 1.521329] microcode: CPU7: patch_level=0x01000095 [ 1.521395] microcode: Microcode Update Driver: v2.01 <XXX@XXX>, Peter Oruba [ 1.521621] PM: Hibernation image not present or could not be loaded. [ 1.521626] Loading compiled-in X.509 certificates [ 1.522506] Loaded X.509 cert 'CentOS Linux kernel signing key: fab6ceb724a380c7f0b71f9bd5c76e2d87445f81' [ 1.522532] registered taskstats version 1 [ 1.522566] page_owner is disabled [ 1.527055] Key type trusted registered [ 1.530884] Key type encrypted registered [ 1.530929] IMA: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.531202] BERT: Boot Error Record Table support is disabled. Enable it by using bert_enable as kernel parameter. [ 1.531379] Magic number: 13:280:141 [ 1.531453] acpi device:12: hash matches [ 1.531588] rtc_cmos 00:03: setting system clock to 2025-02-03 19:07:00 UTC (1738609620) [ 1.533398] Freeing unused kernel memory: 2176k freed [ 1.534547] Write protecting the kernel read-only data: 12288k [ 1.535297] Freeing unused kernel memory: 116k freed [ 1.537178] Freeing unused kernel memory: 508k freed [ 1.545435] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.545705] systemd[1]: Detected architecture x86-64. [ 1.545710] systemd[1]: Running in initial RAM disk. [ 1.545752] systemd[1]: Set hostname to ... [ 1.623838] systemd[1]: Reached target Swap. [ 1.623933] systemd[1]: Reached target Timers. [ 1.623967] systemd[1]: Reached target Local File Systems. [ 1.624370] systemd[1]: Created slice Root Slice. [ 1.624483] systemd[1]: Listening on Journal Socket. [ 1.624541] systemd[1]: Listening on udev Kernel Socket. [ 1.624692] systemd[1]: Created slice System Slice. [ 1.625815] systemd[1]: Starting Journal Service... [ 1.627047] systemd[1]: Starting Setup Virtual Console... [ 1.628576] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.630106] systemd[1]: Starting Apply Kernel Variables... [ 1.630279] systemd[1]: Listening on udev Control Socket. [ 1.630356] systemd[1]: Reached target Sockets. [ 1.630406] systemd[1]: Reached target Slices. [ 1.631855] systemd[1]: Starting dracut cmdline hook... [ 1.632820] systemd[1]: Started Setup Virtual Console. [ 1.633555] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.633873] systemd[1]: Started Apply Kernel Variables. [ 1.635470] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.640725] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.669212] systemd[1]: Started Journal Service. [ 1.922555] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.922874] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 1.944476] libata version 3.00 loaded. [ 2.370119] tsc: Refined TSC clocksource calibration: 2110.814 MHz [ 2.477352] Switched to clocksource tsc [ 2.498086] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 2, addr XXX [ 2.498094] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 2.498537] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 20 [ 2.849061] [drm] radeon kernel modesetting enabled. [ 2.849529] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 2.849780] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x1611 0x02). [ 2.849838] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window] [ 2.849844] caller pci_map_rom+0x39/0x190 mapping multiple BARs [ 2.850531] radeon 0000:01:05.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (16M used) [ 2.850534] radeon 0000:01:05.0: GTT: 512M 0x00000000D0000000 - 0x00000000EFFFFFFF [ 2.850547] [drm] Detected VRAM RAM=128M, BAR=128M [ 2.850548] [drm] RAM width 16bits DDR [ 2.850666] [TTM] Zone kernel: Available graphics memory: 4003790 kiB [ 2.850668] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.850671] [TTM] Initializing pool allocator [ 2.850679] [TTM] Initializing DMA pool allocator [ 2.850709] [drm] radeon: 16M of VRAM memory ready [ 2.850711] [drm] radeon: 512M of GTT memory ready. [ 2.850727] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.872243] [drm] PCI GART of 512M enabled (table at 0x00000000DB200000). [ 2.872277] radeon 0000:01:05.0: WB disabled [ 2.872284] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xffff93bd5b515000 [ 2.872288] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.872290] [drm] Driver supports precise vblank timestamp query. [ 2.872324] [drm] radeon: irq initialized. [ 2.872342] [drm] Loading R100 Microcode [ 2.872670] [drm] radeon: ring at 0x00000000D0001000 [ 2.872705] [drm] ring test succeeded in 0 usecs [ 2.872948] [drm] ib test succeeded in 0 usecs [ 2.873378] [drm] No TV DAC info found in BIOS [ 2.873449] [drm] Radeon Display Connectors [ 2.873451] [drm] Connector 0: [ 2.873453] [drm] VGA-1 [ 2.873455] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 2.873457] [drm] Encoders: [ 2.873458] [drm] CRT1: INTERNAL_DAC1 [ 2.873460] [drm] Connector 1: [ 2.873461] [drm] DVI-I-1 [ 2.873462] [drm] HPD2 [ 2.873464] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 2.873465] [drm] Encoders: [ 2.873467] [drm] CRT2: INTERNAL_DAC2 [ 2.873468] [drm] DFP2: INTERNAL_DVO1 [ 2.917132] [drm] fb mappable at 0xF0040000 [ 2.917134] [drm] vram apper at 0xF0000000 [ 2.917136] [drm] size 1572864 [ 2.917137] [drm] fb depth is 16 [ 2.917138] [drm] pitch is 2048 [ 2.917224] fbcon: radeondrmfb (fb0) is primary device [ 3.088995] Console: switching to colour frame buffer device 128x48 [ 3.091885] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 3, addr XXX [ 3.091889] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 3.092039] pata_amd 0000:00:04.0: version 0.4.1 [ 3.094384] scsi host0: pata_amd [ 3.094592] scsi host1: pata_amd [ 3.094657] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 3.094659] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 3.094802] sata_nv 0000:00:05.0: version 3.5 [ 3.095229] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 3.095312] sata_nv 0000:00:05.0: Using SWNCQ mode [ 3.096073] scsi host2: sata_nv [ 3.096425] scsi host3: sata_nv [ 3.096504] ata3: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 21 [ 3.096516] ata4: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 21 [ 3.096876] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23 [ 3.096903] sata_nv 0000:00:05.1: Using SWNCQ mode [ 3.097911] scsi host4: sata_nv [ 3.098067] scsi host5: sata_nv [ 3.098208] ata5: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 23 [ 3.098232] ata6: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 23 [ 3.098610] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 22 [ 3.098638] sata_nv 0000:00:05.2: Using SWNCQ mode [ 3.099470] scsi host6: sata_nv [ 3.099623] scsi host7: sata_nv [ 3.099703] ata7: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22 [ 3.099715] ata8: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22 [ 3.103735] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device [ 3.109206] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0 [ 3.260527] ata1.01: ATAPI: Optiarc DVD RW AD-7590A, 1.05, max UDMA/33 [ 3.260545] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:60:0x14) [ 3.266461] ata1.01: configured for UDMA/33 [ 3.274926] scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-7590A 1.05 PQ: 0 ANSI: 5 [ 3.290427] ata2: port disabled--ignoring [ 3.326766] sr 0:0:1:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.326772] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.327087] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 3.402195] ata7: SATA link down (SStatus 0 SControl 300) [ 3.550217] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.552210] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.555967] ata5.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 3.555972] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.559945] ata5.00: configured for UDMA/133 [ 3.645491] ata3.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 3.645494] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.648453] ata3.00: configured for UDMA/133 [ 3.648683] scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5 [ 3.696998] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.697248] sd 2:0:0:0: [sda] Write Protect is off [ 3.697256] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.697313] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.717713] sda: sda1 [ 3.718201] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.121265] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.178611] ata4.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 4.178616] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.181578] ata4.00: configured for UDMA/133 [ 4.181752] scsi 3:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5 [ 4.192484] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.192574] sd 3:0:0:0: [sdb] Write Protect is off [ 4.192579] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.192605] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.192718] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5 [ 4.203937] sdb: sdb1 sdb2 [ 4.204462] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.207783] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.207925] sd 4:0:0:0: [sdc] Write Protect is off [ 4.207931] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.207978] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.220240] sdc: sdc1 sdc2 [ 4.220748] sd 4:0:0:0: [sdc] Attached SCSI disk [ 4.661299] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.702644] ata6.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133 [ 4.702651] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 4.705629] ata6.00: configured for UDMA/133 [ 4.705813] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADS-00L 1A01 PQ: 0 ANSI: 5 [ 4.716545] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.716639] sd 5:0:0:0: [sdd] Write Protect is off [ 4.716643] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.716690] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.735462] sdd: sdd1 sdd2 [ 4.735965] sd 5:0:0:0: [sdd] Attached SCSI disk [ 4.867919] random: crng init done [ 5.019327] ata8: SATA link down (SStatus 0 SControl 300) [ 10.927399] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 11.351364] systemd-journald[126]: Received SIGTERM from PID 1 (systemd). [ 12.339227] SELinux: Disabled at runtime. [ 12.339269] SELinux: Unregistering netfilter hooks [ 12.388961] type=1404 audit(1738609631.355:2): selinux=0 auid=4294967295 ses=4294967295 [ 12.762554] ip_tables: (C) 0DB3-0E5D Netfilter Core Team [ 12.763393] systemd[1]: Inserted module 'ip_tables' [ 15.689173] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended [ 15.754188] EXT4-fs (sda1): re-mounted. Opts: (null) [ 16.676369] systemd-journald[445]: Received request to flush runtime journal from PID 1 [ 16.982994] openafs: loading out-of-tree module taints kernel. [ 16.983007] openafs: module license 'http://www.openafs.org/dl/license10.html' taints kernel. [ 16.983010] Disabling lock debugging due to kernel taint [ 16.986414] openafs: module verification failed: signature and/or required key missing - tainting kernel [ 16.992626] Key type afs_pag registered [ 17.031911] RPC: Registered named UNIX socket transport module. [ 17.031918] RPC: Registered udp transport module. [ 17.031920] RPC: Registered tcp transport module. [ 17.031921] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.741332] Installing knfsd (copyright (C) 1996 XXX@XXX). [ 20.214109] acpi-cpufreq: overriding BIOS provided _PSD data [ 20.674670] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled [ 20.674736] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled [ 20.878038] i2c i2c-4: nForce2 SMBus adapter at 0x2d00 [ 20.883825] i2c i2c-5: nForce2 SMBus adapter at 0x2e00 [ 21.017457] sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 21.017577] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 21.017663] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 21.017784] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 21.017874] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 21.057497] nv_tco: NV TCO WatchDog Timer Driver v0.01 [ 21.057645] nv_tco: Watchdog reboot not detected [ 21.057867] nv_tco: initialized (0x2440). heartbeat=30 sec (nowayout=0) [ 21.092503] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 21.422939] ppdev: user-space parallel port driver [ 21.617445] kvm: Nested Paging enabled [ 21.796828] MCE: In-kernel MCE decoding enabled. [ 21.917540] AMD64 EDAC driver v3.4.0 [ 21.917593] EDAC amd64: DRAM ECC enabled. [ 21.917599] EDAC amd64: F10h detected (node 0). [ 21.917642] EDAC MC: DCT0 chip selects: [ 21.917655] EDAC amd64: MC: 0: 0MB 1: 0MB [ 21.917657] EDAC amd64: MC: 2: 0MB 3: 0MB [ 21.917658] EDAC amd64: MC: 4: 0MB 5: 0MB [ 21.917660] EDAC amd64: MC: 6: 2048MB 7: 2048MB [ 21.917662] EDAC MC: DCT1 chip selects: [ 21.917666] EDAC amd64: MC: 0: 0MB 1: 0MB [ 21.917670] EDAC amd64: MC: 2: 0MB 3: 0MB [ 21.917674] EDAC amd64: MC: 4: 0MB 5: 0MB [ 21.917678] EDAC amd64: MC: 6: 2048MB 7: 2048MB [ 21.917680] EDAC amd64: using x4 syndromes. [ 21.917690] EDAC amd64: MCT channel count: 2 [ 21.918000] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.3 [ 21.918027] EDAC amd64: DRAM ECC disabled. [ 21.918032] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 21.918065] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 23.193427] async_tx: api initialized (async) [ 23.238426] xor: measuring software checksum speed [ 23.247875] prefetch64-sse: 4400.000 MB/sec [ 23.257875] generic_sse: 4104.000 MB/sec [ 23.257880] xor: using function: prefetch64-sse (4400.000 MB/sec) [ 23.499892] raid6: sse2x1 gen() 2074 MB/s [ 23.516891] raid6: sse2x2 gen() 3187 MB/s [ 23.533913] raid6: sse2x4 gen() 3625 MB/s [ 23.533918] raid6: using algorithm sse2x4 gen() (3625 MB/s) [ 23.533922] raid6: using intx1 recovery algorithm [ 23.900956] md/raid:md127: device sdb2 operational as raid disk 0 [ 23.900964] md/raid:md127: device sdd2 operational as raid disk 2 [ 23.900967] md/raid:md127: device sdc2 operational as raid disk 1 [ 23.901157] md/raid:md126: device sdb1 operational as raid disk 0 [ 23.901169] md/raid:md126: device sdd1 operational as raid disk 2 [ 23.901174] md/raid:md126: device sdc1 operational as raid disk 1 [ 23.901739] md/raid:md127: raid level 5 active with 3 out of 3 devices, algorithm 2 [ 23.901804] md127: detected capacity change from 0 to 1428385431552 [ 23.902233] md/raid:md126: raid level 5 active with 3 out of 3 devices, algorithm 2 [ 23.902339] md126: detected capacity change from 0 to 572018655232 [ 24.056077] floppy0: no floppy controllers found [ 38.643881] EXT4-fs (md127): mounting ext3 file system using the ext4 subsystem [ 38.806789] EXT4-fs (md127): warning: checktime reached, running e2fsck is recommended [ 38.822416] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) [ 40.176087] EXT4-fs (md126): mounting ext3 file system using the ext4 subsystem [ 40.204615] EXT4-fs (md126): warning: checktime reached, running e2fsck is recommended [ 40.245154] EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null) [ 40.636899] type=1305 audit(1738609659.600:3): audit_pid=650 old=0 auid=4294967295 ses=4294967295 res=1 [ 41.702861] w83627hf: w83627hf: Found W83627HF chip at 0x290 [ 41.780644] w83793 5-002c: Registered watchdog chardev major 10, minor: 212 [ 51.008416] ip6_tables: (C) 0DB3-0E5D Netfilter Core Team [ 51.117275] Ebtables v2.0 registered [ 51.293031] ip_set: protocol 7 [ 51.876805] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 54.357042] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 58.457589] forcedeth 0000:00:08.0: irq 28 for MSI/MSI-X [ 58.457670] forcedeth 0000:00:08.0 enp0s8: MSI enabled [ 58.458685] IPv6: ADDRCONF(NETDEV_UP): enp0s8: link is not ready [ 58.458794] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s8: link becomes ready [ 59.269470] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready [ 59.270329] forcedeth 0000:00:09.0: irq 29 for MSI/MSI-X [ 59.270394] forcedeth 0000:00:09.0 enp0s9: MSI enabled [ 59.270617] forcedeth 0000:00:09.0 enp0s9: no link during initialization [ 59.271297] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready [ 67.010266] afs: Binding rx to XXX.XXX.XXX.XXX:XXX [ 67.011600] enabling dynamically allocated vcaches [ 67.262855] NFSD: starting 90-second grace period (net ffffffffb8716a40) [ 67.011618] Starting AFS cache scan...found 86 non-empty cache files (5%). [ 280.338883] usb 2-2: new low-speed USB device number 2 using ohci-pci [ 280.538893] usb 2-2: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 280.538901] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 280.538906] usb 2-2: Product: Dell KB216 Wired Keyboard [ 280.550918] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3 [ 280.602324] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:02.0-2/input0 [ 280.610761] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input4 [ 280.661127] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:02.0-2/input1 [ 697.586141] usb 2-2: USB disconnect, device number 2 [ 697.597137] hid-generic 0003:413C:2113.0001: usb_submit_urb(ctrl) failed: -19 [ 3950.302181] md: data-check of RAID array md126 [ 8059.852029] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 8458.715261] md: md126: data-check done. [19063.500466] conntrack: generic helper won't handle protocol 47. Please consider loading the specific helper module. [20293.227361] perf: interrupt took too long (3143 > 3133), lowering kernel.perf_event_max_sample_rate to 63000 [59898.821751] perf: interrupt took too long (3932 > 3928), lowering kernel.perf_event_max_sample_rate to 50000 [287542.057430] perf: interrupt took too long (4918 > 4915), lowering kernel.perf_event_max_sample_rate to 40000 [471251.790011] md: data-check of RAID array md126 [471257.970618] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [475819.953223] md: md126: data-check done. [475819.954589] md: data-check of RAID array md127 [491676.528734] md: md127: data-check done. [1076138.037032] md: data-check of RAID array md126 [1076144.189273] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [1080738.502305] md: md126: data-check done. [1080738.503862] md: data-check of RAID array md127 [1091902.654571] ata4: EH in SWNCQ mode,QC:qc_active 0x2 sactive 0x2 [1091902.654780] ata4: SWNCQ:qc_active 0x2 defer_bits 0x0 last_issue_tag 0x1 dhfis 0x2 dmafis 0x2 sdbfis 0x0 [1091902.655158] ata4: ATA_REG 0x41 ERR_REG 0x40 [1091902.655303] ata4: tag : dhfis dmafis sdbfis sactive [1091902.655457] ata4: tag 0x1: 1 1 0 1 [1091902.655660] ata4.00: exception Emask 0x1 SAct 0x2 SErr 0x0 action 0x6 frozen [1091902.655862] ata4.00: Ata error. fis:0x21 [1091902.655979] ata4.00: failed command: READ FPDMA QUEUED [1091902.656133] ata4.00: cmd 60/00:08:d4:a4:12/01:00:57:00:00/40 tag 1 ncq 131072 in res 41/40:0c:d4:a4:12/40:00:57:00:00/40 Emask 0x9 (media error) [1091902.656575] ata4.00: status: { DRDY ERR } [1091902.657118] ata4.00: error: { UNC } [1091902.657238] ata4: hard resetting link [1091902.657242] ata4: nv: skipping hardreset on occupied port [1091903.110616] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [1091903.116899] ata4.00: configured for UDMA/133 [1091903.116974] sd 3:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=4s [1091903.116983] sd 3:0:0:0: [sdb] tag#1 Sense Key : Medium Error [current] [descriptor] [1091903.116990] sd 3:0:0:0: [sdb] tag#1 Add. Sense: Unrecovered read error - auto reallocate failed [1091903.116999] sd 3:0:0:0: [sdb] tag#1 CDB: Read(10) 28 00 57 12 a4 d4 00 01 00 00 [1091903.117004] blk_update_request: I/O error, dev sdb, sector 1460839636 [1091903.117301] ata4: EH complete [1098290.561284] md: md127: data-check done. [1681026.170618] md: data-check of RAID array md126 [1681032.348506] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [1685646.782915] md: md126: data-check done. [1685646.784289] md: data-check of RAID array md127 [1702228.038438] md: md127: data-check done. [2285911.970644] md: data-check of RAID array md126 [2285918.092403] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [2290568.239535] md: md126: data-check done. [2290568.240950] md: data-check of RAID array md127 [2306781.072119] md: md127: data-check done. [2890800.131316] md: data-check of RAID array md126 [2890806.279718] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [2895352.562832] md: md126: data-check done. [2895352.564243] md: data-check of RAID array md127 [2911213.788105] md: md127: data-check done. [3041549.514678] RPC: fragment too large: 369295616 [3041549.528979] RPC: fragment too large: 369295360 [3041549.542259] RPC: fragment too large: 352518912 [3041549.555825] RPC: fragment too large: 369295616 [3041549.569555] RPC: fragment too large: 369295618 [3041549.582320] RPC: fragment too large: 369295616 [3041549.599618] RPC: fragment too large: 369295618 [3041549.619301] RPC: fragment too large: 369295362 [3041549.633214] RPC: fragment too large: 4194560 [3041554.867564] RPC: fragment too large: 1195725856 [3041555.973244] RPC: fragment too large: 1212501072 [3284925.259297] RPC: fragment too large: 369295616 [3284925.272597] RPC: fragment too large: 369295360 [3284925.285676] RPC: fragment too large: 352518912 [3284925.299062] RPC: fragment too large: 369295616 [3284925.311791] RPC: fragment too large: 369295618 [3284925.324593] RPC: fragment too large: 369295616 [3284925.341416] RPC: fragment too large: 369295618 [3284925.354605] RPC: fragment too large: 369295362 [3284925.369070] RPC: fragment too large: 4194560 [3284930.618039] RPC: fragment too large: 1195725856 [3284931.674429] RPC: fragment too large: 1212501072 [3284935.418947] RPC: fragment too large: 50331667 [3284935.441390] RPC: fragment too large: 50399744 [3284945.344034] RPC: fragment too large: 369295618 [3284945.434212] RPC: fragment too large: 1195725856 [3284945.436894] RPC: fragment too large: 369295618 [3284945.512969] RPC: fragment too large: 1195725856 [3284945.515510] RPC: fragment too large: 1195725856 [3284950.569556] RPC: fragment too large: 1224736768 [3492086.188915] md: data-check of RAID array md126 [3492092.346190] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [3496925.702892] md: md126: data-check done. [3496925.704523] md: data-check of RAID array md127 [3502464.033745] ata4: EH in SWNCQ mode,QC:qc_active 0x100000 sactive 0x100000 [3502464.033967] ata4: SWNCQ:qc_active 0x100000 defer_bits 0x0 last_issue_tag 0x14 dhfis 0x100000 dmafis 0x100000 sdbfis 0x0 [3502464.034387] ata4: ATA_REG 0x41 ERR_REG 0x40 [3502464.034554] ata4: tag : dhfis dmafis sdbfis sactive [3502464.034753] ata4: tag 0x14: 1 1 0 1 [3502464.034882] ata4.00: exception Emask 0x1 SAct 0x100000 SErr 0x0 action 0x6 frozen [3502464.035094] ata4.00: Ata error. fis:0x21 [3502464.035211] ata4.00: failed command: READ FPDMA QUEUED [3502464.035368] ata4.00: cmd 60/00:a0:d4:94:bc/01:00:3d:00:00/40 tag 20 ncq 131072 in res 41/40:a4:d4:94:bc/40:00:3d:00:00/40 Emask 0x9 (media error) [3502464.035813] ata4.00: status: { DRDY ERR } [3502464.035928] ata4.00: error: { UNC } [3502464.036038] ata4: hard resetting link [3502464.036041] ata4: nv: skipping hardreset on occupied port [3502464.489789] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [3502464.497982] ata4.00: configured for UDMA/133 [3502464.498051] sd 3:0:0:0: [sdb] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=4s [3502464.498060] sd 3:0:0:0: [sdb] tag#20 Sense Key : Medium Error [current] [descriptor] [3502464.498068] sd 3:0:0:0: [sdb] tag#20 Add. Sense: Unrecovered read error - auto reallocate failed [3502464.498076] sd 3:0:0:0: [sdb] tag#20 CDB: Read(10) 28 00 3d bc 94 d4 00 01 00 00 [3502464.498082] blk_update_request: I/O error, dev sdb, sector 1035769044 [3502464.505973] ata4: EH complete [3502468.123313] ata4: EH in SWNCQ mode,QC:qc_active 0x4000000 sactive 0x4000000 [3502468.131674] ata4: SWNCQ:qc_active 0x4000000 defer_bits 0x0 last_issue_tag 0x1a dhfis 0x4000000 dmafis 0x4000000 sdbfis 0x0 [3502468.146569] ata4: ATA_REG 0x41 ERR_REG 0x40 [3502468.153578] ata4: tag : dhfis dmafis sdbfis sactive [3502468.160544] ata4: tag 0x1a: 1 1 0 1 [3502468.167336] ata4.00: exception Emask 0x1 SAct 0x4000000 SErr 0x0 action 0x6 frozen [3502468.174211] ata4.00: Ata error. fis:0x21 [3502468.181102] ata4.00: failed command: READ FPDMA QUEUED [3502468.188047] ata4.00: cmd 60/80:d0:54:95:bc/00:00:3d:00:00/40 tag 26 ncq 65536 in res 41/40:d4:54:95:bc/40:00:3d:00:00/40 Emask 0x9 (media error) [3502468.201677] ata4.00: status: { DRDY ERR } [3502468.208510] ata4.00: error: { UNC } [3502468.215293] ata4: hard resetting link [3502468.215297] ata4: nv: skipping hardreset on occupied port [3502468.669385] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [3502468.675845] ata4.00: configured for UDMA/133 [3502468.675894] sd 3:0:0:0: [sdb] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=4s [3502468.675902] sd 3:0:0:0: [sdb] tag#26 Sense Key : Medium Error [current] [descriptor] [3502468.675909] sd 3:0:0:0: [sdb] tag#26 Add. Sense: Unrecovered read error - auto reallocate failed [3502468.675916] sd 3:0:0:0: [sdb] tag#26 CDB: Read(10) 28 00 3d bc 95 54 00 00 80 00 [3502468.675921] blk_update_request: I/O error, dev sdb, sector 1035769172 [3502468.683895] ata4: EH complete [3502468.747690] md/raid:md127: read error corrected (8 sectors at 477156992 on sdb2) [3502468.747702] md/raid:md127: read error corrected (8 sectors at 477157000 on sdb2) [3502468.747708] md/raid:md127: read error corrected (8 sectors at 477157008 on sdb2) [3502468.747713] md/raid:md127: read error corrected (8 sectors at 477157016 on sdb2) [3502468.747717] md/raid:md127: read error corrected (8 sectors at 477157024 on sdb2) [3502468.747721] md/raid:md127: read error corrected (8 sectors at 477157032 on sdb2) [3502468.747726] md/raid:md127: read error corrected (8 sectors at 477157040 on sdb2) [3502468.747730] md/raid:md127: read error corrected (8 sectors at 477157048 on sdb2) [3502468.747734] md/raid:md127: read error corrected (8 sectors at 477157056 on sdb2) [3502468.747738] md/raid:md127: read error corrected (8 sectors at 477157064 on sdb2) [3505535.011771] ata4: EH in SWNCQ mode,QC:qc_active 0x10 sactive 0x10 [3505535.019383] ata4: SWNCQ:qc_active 0x10 defer_bits 0x0 last_issue_tag 0x4 dhfis 0x10 dmafis 0x10 sdbfis 0x0 [3505535.033805] ata4: ATA_REG 0x41 ERR_REG 0x40 [3505535.040633] ata4: tag : dhfis dmafis sdbfis sactive [3505535.047395] ata4: tag 0x4: 1 1 0 1 [3505535.053911] ata4.00: exception Emask 0x1 SAct 0x10 SErr 0x0 action 0x6 frozen [3505535.060585] ata4.00: Ata error. fis:0x21 [3505535.067042] ata4.00: failed command: READ FPDMA QUEUED [3505535.073511] ata4.00: cmd 60/00:20:d4:c6:07/01:00:4b:00:00/40 tag 4 ncq 131072 in res 41/40:24:d4:c6:07/40:00:4b:00:00/40 Emask 0x9 (media error) [3505535.086598] ata4.00: status: { DRDY ERR } [3505535.093246] ata4.00: error: { UNC } [3505535.099711] ata4: hard resetting link [3505535.099717] ata4: nv: skipping hardreset on occupied port [3505535.553842] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [3505535.560176] ata4.00: configured for UDMA/133 [3505535.560246] sd 3:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=5s [3505535.560255] sd 3:0:0:0: [sdb] tag#4 Sense Key : Medium Error [current] [descriptor] [3505535.560262] sd 3:0:0:0: [sdb] tag#4 Add. Sense: Unrecovered read error - auto reallocate failed [3505535.560271] sd 3:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 4b 07 c6 d4 00 01 00 00 [3505535.560277] blk_update_request: I/O error, dev sdb, sector 1258800852 [3505535.567858] ata4: EH complete [3505541.890772] ata4: EH in SWNCQ mode,QC:qc_active 0x400 sactive 0x400 [3505541.897857] ata4: SWNCQ:qc_active 0x400 defer_bits 0x0 last_issue_tag 0xa dhfis 0x400 dmafis 0x400 sdbfis 0x0 [3505541.911433] ata4: ATA_REG 0x41 ERR_REG 0x40 [3505541.918093] ata4: tag : dhfis dmafis sdbfis sactive [3505541.924870] ata4: tag 0xa: 1 1 0 1 [3505541.931659] ata4.00: exception Emask 0x1 SAct 0x400 SErr 0x0 action 0x6 frozen [3505541.938234] ata4.00: Ata error. fis:0x21 [3505541.945457] ata4.00: failed command: READ FPDMA QUEUED [3505541.952181] ata4.00: cmd 60/80:50:54:c7:07/00:00:4b:00:00/40 tag 10 ncq 65536 in res 41/40:54:54:c7:07/40:00:4b:00:00/40 Emask 0x9 (media error) [3505541.965730] ata4.00: status: { DRDY ERR } [3505541.972461] ata4.00: error: { UNC } [3505541.979321] ata4: hard resetting link [3505541.979326] ata4: nv: skipping hardreset on occupied port [3505542.432822] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [3505542.439132] ata4.00: configured for UDMA/133 [3505542.439191] sd 3:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=6s [3505542.439200] sd 3:0:0:0: [sdb] tag#10 Sense Key : Medium Error [current] [descriptor] [3505542.439207] sd 3:0:0:0: [sdb] tag#10 Add. Sense: Unrecovered read error - auto reallocate failed [3505542.439216] sd 3:0:0:0: [sdb] tag#10 CDB: Read(10) 28 00 4b 07 c7 54 00 00 80 00 [3505542.439221] blk_update_request: I/O error, dev sdb, sector 1258800980 [3505542.446603] ata4: EH complete [3505542.730102] raid5_end_read_request: 6 callbacks suppressed [3505542.730132] md/raid:md127: read error corrected (8 sectors at 700188800 on sdb2) [3505542.730151] md/raid:md127: read error corrected (8 sectors at 700188808 on sdb2) [3505542.730160] md/raid:md127: read error corrected (8 sectors at 700188816 on sdb2) [3505542.730168] md/raid:md127: read error corrected (8 sectors at 700188824 on sdb2) [3505542.730177] md/raid:md127: read error corrected (8 sectors at 700188832 on sdb2) [3505542.730185] md/raid:md127: read error corrected (8 sectors at 700188840 on sdb2) [3505542.730192] md/raid:md127: read error corrected (8 sectors at 700188848 on sdb2) [3505542.730197] md/raid:md127: read error corrected (8 sectors at 700188856 on sdb2) [3505542.730204] md/raid:md127: read error corrected (8 sectors at 700188864 on sdb2) [3505542.730211] md/raid:md127: read error corrected (8 sectors at 700188872 on sdb2) [3505627.967982] sd 3:0:0:0: [sdb] tag#31 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=3s [3505627.968012] sd 3:0:0:0: [sdb] tag#31 Sense Key : Medium Error [current] [descriptor] [3505627.968022] sd 3:0:0:0: [sdb] tag#31 Add. Sense: Unrecovered read error - auto reallocate failed [3505627.968034] sd 3:0:0:0: [sdb] tag#31 CDB: Read(10) 28 00 4b 3f e0 d4 00 01 00 00 [3505627.968043] blk_update_request: critical medium error, dev sdb, sector 1262477557 [3514566.798118] md: md127: data-check done. [4096973.710557] md: data-check of RAID array md126 [4096979.893452] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [4101816.955513] md: md126: data-check done. [4101816.956883] md: data-check of RAID array md127 [4105467.981994] ata4: EH in SWNCQ mode,QC:qc_active 0x400 sactive 0x400 [4105467.989141] ata4: SWNCQ:qc_active 0x400 defer_bits 0x0 last_issue_tag 0xa dhfis 0x400 dmafis 0x400 sdbfis 0x0 [4105468.003154] ata4: ATA_REG 0x41 ERR_REG 0x40 [4105468.009741] ata4: tag : dhfis dmafis sdbfis sactive [4105468.016291] ata4: tag 0xa: 1 1 0 1 [4105468.022795] ata4.00: exception Emask 0x1 SAct 0x400 SErr 0x0 action 0x6 frozen [4105468.029202] ata4.00: Ata error. fis:0x21 [4105468.035658] ata4.00: failed command: READ FPDMA QUEUED [4105468.042163] ata4.00: cmd 60/00:50:d4:0c:51/01:00:35:00:00/40 tag 10 ncq 131072 in res 41/40:54:d4:0c:51/40:00:35:00:00/40 Emask 0x9 (media error) [4105468.055309] ata4.00: status: { DRDY ERR } [4105468.061793] ata4.00: error: { UNC } [4105468.068209] ata4: hard resetting link [4105468.068213] ata4: nv: skipping hardreset on occupied port [4105468.522049] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [4105468.528387] ata4.00: configured for UDMA/133 [4105468.528456] sd 3:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=5s [4105468.528465] sd 3:0:0:0: [sdb] tag#10 Sense Key : Medium Error [current] [descriptor] [4105468.528472] sd 3:0:0:0: [sdb] tag#10 Add. Sense: Unrecovered read error - auto reallocate failed [4105468.528481] sd 3:0:0:0: [sdb] tag#10 CDB: Read(10) 28 00 35 51 0c d4 00 01 00 00 [4105468.528486] blk_update_request: I/O error, dev sdb, sector 894504148 [4105468.535871] ata4: EH complete [4105473.082715] ata4: EH in SWNCQ mode,QC:qc_active 0x14000 sactive 0x14000 [4105473.090055] ata4: SWNCQ:qc_active 0x4000 defer_bits 0x10000 last_issue_tag 0xe dhfis 0x4000 dmafis 0x4000 sdbfis 0x0 [4105473.104161] ata4: ATA_REG 0x41 ERR_REG 0x40 [4105473.110927] ata4: tag : dhfis dmafis sdbfis sactive [4105473.117821] ata4: tag 0xe: 1 1 0 1 [4105473.124578] ata4.00: exception Emask 0x1 SAct 0x14000 SErr 0x0 action 0x6 frozen [4105473.131299] ata4.00: Ata error. fis:0x21 [4105473.137931] ata4.00: failed command: READ FPDMA QUEUED [4105473.144551] ata4.00: cmd 60/80:70:d4:0c:51/00:00:35:00:00/40 tag 14 ncq 65536 in res 41/40:74:d4:0c:51/40:00:35:00:00/40 Emask 0x9 (media error) [4105473.158148] ata4.00: status: { DRDY ERR } [4105473.165148] ata4.00: error: { UNC } [4105473.171942] ata4.00: failed command: READ FPDMA QUEUED [4105473.178702] ata4.00: cmd 60/80:80:54:0d:51/00:00:35:00:00/40 tag 16 ncq 65536 in res 41/40:74:d4:0c:51/40:00:35:00:00/40 Emask 0x9 (media error) [4105473.192100] ata4.00: status: { DRDY ERR } [4105473.198880] ata4.00: error: { UNC } [4105473.205585] ata4: hard resetting link [4105473.205590] ata4: nv: skipping hardreset on occupied port [4105473.658784] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [4105473.666051] ata4.00: configured for UDMA/133 [4105473.666105] sd 3:0:0:0: [sdb] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=5s [4105473.666113] sd 3:0:0:0: [sdb] tag#14 Sense Key : Medium Error [current] [descriptor] [4105473.666120] sd 3:0:0:0: [sdb] tag#14 Add. Sense: Unrecovered read error - auto reallocate failed [4105473.666128] sd 3:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 35 51 0c d4 00 00 80 00 [4105473.666133] blk_update_request: I/O error, dev sdb, sector 894504148 [4105473.673631] sd 3:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=5s [4105473.673637] sd 3:0:0:0: [sdb] tag#16 Sense Key : Medium Error [current] [descriptor] [4105473.673643] sd 3:0:0:0: [sdb] tag#16 Add. Sense: Unrecovered read error - auto reallocate failed [4105473.673649] sd 3:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 35 51 0d 54 00 00 80 00 [4105473.673654] blk_update_request: I/O error, dev sdb, sector 894504276 [4105473.680263] ata4: EH complete [4105473.700026] raid5_end_read_request: 6 callbacks suppressed [4105473.700052] md/raid:md127: read error corrected (8 sectors at 335891968 on sdb2) [4105473.700066] md/raid:md127: read error corrected (8 sectors at 335891976 on sdb2) [4105473.700073] md/raid:md127: read error corrected (8 sectors at 335891984 on sdb2) [4105473.700079] md/raid:md127: read error corrected (8 sectors at 335891992 on sdb2) [4105473.700086] md/raid:md127: read error corrected (8 sectors at 335892000 on sdb2) [4105473.700092] md/raid:md127: read error corrected (8 sectors at 335892008 on sdb2) [4105473.700098] md/raid:md127: read error corrected (8 sectors at 335892016 on sdb2) [4105473.700103] md/raid:md127: read error corrected (8 sectors at 335892024 on sdb2) [4105473.700109] md/raid:md127: read error corrected (8 sectors at 335892032 on sdb2) [4105473.700115] md/raid:md127: read error corrected (8 sectors at 335892040 on sdb2) [4111630.053078] ata4: EH in SWNCQ mode,QC:qc_active 0x1000 sactive 0x1000 [4111630.059940] ata4: SWNCQ:qc_active 0x1000 defer_bits 0x0 last_issue_tag 0xc dhfis 0x1000 dmafis 0x1000 sdbfis 0x0 [4111630.073849] ata4: ATA_REG 0x41 ERR_REG 0x40 [4111630.080566] ata4: tag : dhfis dmafis sdbfis sactive [4111630.087054] ata4: tag 0xc: 1 1 0 1 [4111630.093448] ata4.00: exception Emask 0x1 SAct 0x1000 SErr 0x0 action 0x6 frozen [4111630.100024] ata4.00: Ata error. fis:0x21 [4111630.106448] ata4.00: failed command: READ FPDMA QUEUED [4111630.112926] ata4.00: cmd 60/00:60:d4:a3:4a/01:00:50:00:00/40 tag 12 ncq 131072 in res 41/40:64:d4:a3:4a/40:00:50:00:00/40 Emask 0x9 (media error) [4111630.125804] ata4.00: status: { DRDY ERR } [4111630.132304] ata4.00: error: { UNC } [4111630.138627] ata4: hard resetting link [4111630.138632] ata4: nv: skipping hardreset on occupied port [4111630.592124] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [4111630.599473] ata4.00: configured for UDMA/133 [4111630.599540] sd 3:0:0:0: [sdb] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=4s [4111630.599549] sd 3:0:0:0: [sdb] tag#12 Sense Key : Medium Error [current] [descriptor] [4111630.599557] sd 3:0:0:0: [sdb] tag#12 Add. Sense: Unrecovered read error - auto reallocate failed [4111630.599565] sd 3:0:0:0: [sdb] tag#12 CDB: Read(10) 28 00 50 4a a3 d4 00 01 00 00 [4111630.599571] blk_update_request: I/O error, dev sdb, sector 1347068884 [4111630.606916] ata4: EH complete [4111714.966253] ata4: EH in SWNCQ mode,QC:qc_active 0x1000000 sactive 0x1000000 [4111714.973126] ata4: SWNCQ:qc_active 0x1000000 defer_bits 0x0 last_issue_tag 0x18 dhfis 0x1000000 dmafis 0x1000000 sdbfis 0x0 [4111714.986827] ata4: ATA_REG 0x41 ERR_REG 0x40 [4111714.993542] ata4: tag : dhfis dmafis sdbfis sactive [4111715.000395] ata4: tag 0x18: 1 1 0 1 [4111715.007041] ata4.00: exception Emask 0x1 SAct 0x1000000 SErr 0x0 action 0x6 frozen [4111715.013930] ata4.00: Ata error. fis:0x21 [4111715.020650] ata4.00: failed command: READ FPDMA QUEUED [4111715.027157] ata4.00: cmd 60/00:c0:d4:ff:8f/01:00:50:00:00/40 tag 24 ncq 131072 in res 41/40:c4:d4:ff:8f/40:00:50:00:00/40 Emask 0x9 (media error) [4111715.040059] ata4.00: status: { DRDY ERR } [4111715.046715] ata4.00: error: { UNC } [4111715.053325] ata4: hard resetting link [4111715.053330] ata4: nv: skipping hardreset on occupied port [4111715.558324] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [4111715.564641] ata4.00: configured for UDMA/133 [4111715.564702] sd 3:0:0:0: [sdb] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=7s [4111715.564711] sd 3:0:0:0: [sdb] tag#24 Sense Key : Medium Error [current] [descriptor] [4111715.564719] sd 3:0:0:0: [sdb] tag#24 Add. Sense: Unrecovered read error - auto reallocate failed [4111715.564727] sd 3:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 50 8f ff d4 00 01 00 00 [4111715.564733] blk_update_request: I/O error, dev sdb, sector 1351614420 [4111715.572157] ata4: EH complete [4112234.824997] ata4: EH in SWNCQ mode,QC:qc_active 0x20000 sactive 0x20000 [4112234.831944] ata4: SWNCQ:qc_active 0x20000 defer_bits 0x0 last_issue_tag 0x11 dhfis 0x20000 dmafis 0x20000 sdbfis 0x0 [4112234.845652] ata4: ATA_REG 0x41 ERR_REG 0x40 [4112234.852465] ata4: tag : dhfis dmafis sdbfis sactive [4112234.859332] ata4: tag 0x11: 1 1 0 1 [4112234.865905] ata4.00: exception Emask 0x1 SAct 0x20000 SErr 0x0 action 0x6 frozen [4112234.872668] ata4.00: Ata error. fis:0x21 [4112234.879268] ata4.00: failed command: READ FPDMA QUEUED [4112234.885749] ata4.00: cmd 60/00:88:d4:b4:ea/01:00:51:00:00/40 tag 17 ncq 131072 in res 41/40:8c:d4:b4:ea/40:00:51:00:00/40 Emask 0x9 (media error) [4112234.898619] ata4.00: status: { DRDY ERR } [4112234.905104] ata4.00: error: { UNC } [4112234.911644] ata4: hard resetting link [4112234.911649] ata4: nv: skipping hardreset on occupied port [4112235.416036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [4112235.422344] ata4.00: configured for UDMA/133 [4112235.422411] sd 3:0:0:0: [sdb] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=3s [4112235.422420] sd 3:0:0:0: [sdb] tag#17 Sense Key : Medium Error [current] [descriptor] [4112235.422428] sd 3:0:0:0: [sdb] tag#17 Add. Sense: Unrecovered read error - auto reallocate failed [4112235.422436] sd 3:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 51 ea b4 d4 00 01 00 00 [4112235.422442] blk_update_request: I/O error, dev sdb, sector 1374336212 [4112235.429996] ata4: EH complete [4112363.111423] ata4: EH in SWNCQ mode,QC:qc_active 0x200 sactive 0x200 [4112363.118541] ata4: SWNCQ:qc_active 0x200 defer_bits 0x0 last_issue_tag 0x9 dhfis 0x200 dmafis 0x200 sdbfis 0x0 [4112363.132589] ata4: ATA_REG 0x41 ERR_REG 0x40 [4112363.139313] ata4: tag : dhfis dmafis sdbfis sactive [4112363.146141] ata4: tag 0x9: 1 1 0 1 [4112363.152684] ata4.00: exception Emask 0x1 SAct 0x200 SErr 0x0 action 0x6 frozen [4112363.159455] ata4.00: Ata error. fis:0x21 [4112363.166042] ata4.00: failed command: READ FPDMA QUEUED [4112363.172699] ata4.00: cmd 60/00:48:d4:39:2f/01:00:52:00:00/40 tag 9 ncq 131072 in res 41/40:4c:d4:39:2f/40:00:52:00:00/40 Emask 0x9 (media error) [4112363.186021] ata4.00: status: { DRDY ERR } [4112363.192694] ata4.00: error: { UNC } [4112363.199215] ata4: hard resetting link [4112363.199220] ata4: nv: skipping hardreset on occupied port [4112363.652462] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [4112363.659215] ata4.00: configured for UDMA/133 [4112363.659270] sd 3:0:0:0: [sdb] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=4s [4112363.659280] sd 3:0:0:0: [sdb] tag#9 Sense Key : Medium Error [current] [descriptor] [4112363.659288] sd 3:0:0:0: [sdb] tag#9 Add. Sense: Unrecovered read error - auto reallocate failed [4112363.659296] sd 3:0:0:0: [sdb] tag#9 CDB: Read(10) 28 00 52 2f 39 d4 00 01 00 00 [4112363.659301] blk_update_request: I/O error, dev sdb, sector 1378826708 [4112363.666712] ata4: EH complete [4112370.813528] ata4: EH in SWNCQ mode,QC:qc_active 0xC000 sactive 0xC000 [4112370.820783] ata4: SWNCQ:qc_active 0x4000 defer_bits 0x8000 last_issue_tag 0xe dhfis 0x4000 dmafis 0x4000 sdbfis 0x0 [4112370.834727] ata4: ATA_REG 0x41 ERR_REG 0x40 [4112370.841486] ata4: tag : dhfis dmafis sdbfis sactive [4112370.848286] ata4: tag 0xe: 1 1 0 1 [4112370.854980] ata4.00: exception Emask 0x1 SAct 0xc000 SErr 0x0 action 0x6 frozen [4112370.861748] ata4.00: Ata error. fis:0x21 [4112370.868304] ata4.00: failed command: READ FPDMA QUEUED [4112370.874908] ata4.00: cmd 60/80:70:d4:39:2f/00:00:52:00:00/40 tag 14 ncq 65536 in res 41/40:74:d4:39:2f/40:00:52:00:00/40 Emask 0x9 (media error) [4112370.888057] ata4.00: status: { DRDY ERR } [4112370.894677] ata4.00: error: { UNC } [4112370.901206] ata4.00: failed command: READ FPDMA QUEUED [4112370.907797] ata4.00: cmd 60/80:78:54:3a:2f/00:00:52:00:00/40 tag 15 ncq 65536 in res 41/40:74:d4:39:2f/40:00:52:00:00/40 Emask 0x9 (media error) [4112370.920924] ata4.00: status: { DRDY ERR } [4112370.927499] ata4.00: error: { UNC } [4112370.934008] ata4: hard resetting link [4112370.934012] ata4: nv: skipping hardreset on occupied port [4112371.387565] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [4112371.393852] ata4.00: configured for UDMA/133 [4112371.393896] sd 3:0:0:0: [sdb] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=7s [4112371.393904] sd 3:0:0:0: [sdb] tag#14 Sense Key : Medium Error [current] [descriptor] [4112371.393911] sd 3:0:0:0: [sdb] tag#14 Add. Sense: Unrecovered read error - auto reallocate failed [4112371.393918] sd 3:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 52 2f 39 d4 00 00 80 00 [4112371.393923] blk_update_request: I/O error, dev sdb, sector 1378826708 [4112371.401298] sd 3:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=7s [4112371.401306] sd 3:0:0:0: [sdb] tag#15 Sense Key : Medium Error [current] [descriptor] [4112371.401312] sd 3:0:0:0: [sdb] tag#15 Add. Sense: Unrecovered read error - auto reallocate failed [4112371.401318] sd 3:0:0:0: [sdb] tag#15 CDB: Read(10) 28 00 52 2f 3a 54 00 00 80 00 [4112371.401322] blk_update_request: I/O error, dev sdb, sector 1378826836 [4112371.407881] ata4: EH complete [4112371.410044] raid5_end_read_request: 22 callbacks suppressed [4112371.410050] md/raid:md127: read error corrected (8 sectors at 820214528 on sdb2) [4112371.410058] md/raid:md127: read error corrected (8 sectors at 820214536 on sdb2) [4112371.410063] md/raid:md127: read error corrected (8 sectors at 820214544 on sdb2) [4112371.410068] md/raid:md127: read error corrected (8 sectors at 820214552 on sdb2) [4112371.410072] md/raid:md127: read error corrected (8 sectors at 820214560 on sdb2) [4112371.410076] md/raid:md127: read error corrected (8 sectors at 820214568 on sdb2) [4112371.410081] md/raid:md127: read error corrected (8 sectors at 820214576 on sdb2) [4112371.410085] md/raid:md127: read error corrected (8 sectors at 820214584 on sdb2) [4112371.410090] md/raid:md127: read error corrected (8 sectors at 820214592 on sdb2) [4112371.410095] md/raid:md127: read error corrected (8 sectors at 820214600 on sdb2) [4119879.660788] md: md127: data-check done. [4701860.461703] md: data-check of RAID array md126 [4701866.601405] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [4706525.756731] md: md126: data-check done. [4706525.758149] md: data-check of RAID array md127 [4722693.721367] md: md127: data-check done. [5306747.286735] md: data-check of RAID array md126 [5306753.452250] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [5311222.435759] md: md126: data-check done. [5311222.437088] md: data-check of RAID array md127 [5326385.354927] md: md127: data-check done. [5911634.550936] md: data-check of RAID array md126 [5911640.810741] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [5916076.861854] md: md126: data-check done. [5916076.863431] md: data-check of RAID array md127 [5930883.315296] md: md127: data-check done. [6516522.004143] md: data-check of RAID array md126 [6516528.183727] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [6521020.971082] md: md126: data-check done. [6521020.972396] md: data-check of RAID array md127 [6536449.748244] md: md127: data-check done. [7121409.155478] md: data-check of RAID array md126 [7121415.314656] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [7126010.077809] md: md126: data-check done. [7126010.079237] md: data-check of RAID array md127 [7141843.806082] md: md127: data-check done. [7726296.501267] md: data-check of RAID array md126 [7726302.668663] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [7731158.119256] md: md126: data-check done. [7731158.120575] md: data-check of RAID array md127 [7748199.997421] md: md127: data-check done. [7962546.902849] RPC: fragment too large: 369295616 [7962546.904028] RPC: fragment too large: 369295616 [7962546.916416] RPC: fragment too large: 369295360 [7962546.917088] RPC: fragment too large: 369295360 [7962546.930894] RPC: fragment too large: 352518912 [7962546.931352] RPC: fragment too large: 352518912 [7962546.945089] RPC: fragment too large: 369295616 [7962546.946409] RPC: fragment too large: 369295616 [7962546.960949] RPC: fragment too large: 369295618 [7962546.961484] RPC: fragment too large: 369295618 [7962556.500983] net_ratelimit: 10 callbacks suppressed [7962556.500994] RPC: fragment too large: 1212501072 [7962556.501218] RPC: fragment too large: 1212501072 [7962560.493223] RPC: fragment too large: 50331667 [7962560.495195] RPC: fragment too large: 50331667 [7962560.525052] RPC: fragment too large: 50399744 [7962560.526897] RPC: fragment too large: 50399744 [7962574.968407] RPC: fragment too large: 369295618 [7962574.971191] RPC: fragment too large: 369295618 [7962575.018839] RPC: fragment too large: 1195725856 [7962575.021736] RPC: fragment too large: 369295618 [7962575.024281] RPC: fragment too large: 1195725856 [7962575.026886] RPC: fragment too large: 369295618 [7962575.086199] RPC: fragment too large: 1195725856 [7962575.088923] RPC: fragment too large: 1195725856 [7962575.096661] RPC: fragment too large: 1195725856 [7962575.099515] RPC: fragment too large: 1195725856 [7962585.716601] RPC: fragment too large: 1224736768 [7962585.718053] RPC: fragment too large: 1224736768 [7962668.931401] TCP: tcp_parse_options: Illegal window scaling value 123 >14 received [7962684.961019] RPC: fragment too large: 1533112946 [7962684.962732] RPC: fragment too large: 1533112946 [8331183.227989] md: data-check of RAID array md126 [8331189.411588] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [8335728.182987] md: md126: data-check done. [8335728.184395] md: data-check of RAID array md127 [8351421.192589] md: md127: data-check done. [8936070.975395] md: data-check of RAID array md126 [8936077.133392] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [8940722.313780] md: md126: data-check done. [8940722.315169] md: data-check of RAID array md127 [8956839.336474] md: md127: data-check done. [9540957.391189] md: data-check of RAID array md126 [9540963.536525] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [9545735.778655] md: md126: data-check done. [9545735.780192] md: data-check of RAID array md127 [9562306.000488] md: md127: data-check done. [9925617.909904] RPC: fragment too large: 218762506 [9925617.911789] RPC: fragment too large: 1195725856 [9925617.912470] RPC: fragment too large: 1330664521 [9925617.912893] RPC: fragment too large: 1330664521 [10145844.211814] md: data-check of RAID array md126 [10145850.379468] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [10150406.460806] md: md126: data-check done. [10150406.462371] md: data-check of RAID array md127 [10166032.545326] md: md127: data-check done. [10266839.331212] av61937 checking current message status [10266847.269104] av61937 checking current message status [10750732.209325] md: data-check of RAID array md126 [10750738.392352] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [10755093.275155] md: md126: data-check done. [10755093.276498] md: data-check of RAID array md127 [10770884.550998] md: md127: data-check done. [11355619.221820] md: data-check of RAID array md126 [11355625.364484] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [11360135.263969] md: md126: data-check done. [11360135.265347] md: data-check of RAID array md127 [11375349.364758] md: md127: data-check done. [11960506.340636] md: data-check of RAID array md126 [11960512.487610] md: delaying data-check of md127 until md126 has finished (they share one or more physical units) [11964864.987861] md: md126: data-check done. [11964864.989556] md: data-check of RAID array md127 [11980109.908232] md: md127: data-check done. [12257659.370386] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [12257659.667934] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found


Hardware for Linux and BSD

GitHub