[23868.970097] wlp4s0: authenticate with XXX [23869.021000] wlp4s0: bad VHT capabilities, disabling VHT [23869.307723] wlp4s0: send auth to XXX (try 1/3) [23869.311026] wlp4s0: authenticated [23869.340978] wlp4s0: associate with XXX (try 1/3) [23869.351581] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [23869.351834] wlp4s0: associated [23869.378699] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [23869.437766] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [23956.715438] wlp4s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [23961.764949] wlp4s0: authenticate with XXX [23961.797673] wlp4s0: bad VHT capabilities, disabling VHT [23962.084377] wlp4s0: send auth to XXX (try 1/3) [23962.107539] wlp4s0: authenticated [23962.137626] wlp4s0: associate with XXX (try 1/3) [23962.144232] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [23962.144492] wlp4s0: associated [23962.153917] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [23962.244490] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [24524.413894] wlp4s0: Connection to AP XXX lost [24683.988337] wlp4s0: authenticate with XXX [24684.010901] wlp4s0: bad VHT capabilities, disabling VHT [24684.300980] wlp4s0: send auth to XXX (try 1/3) [24684.304279] wlp4s0: authenticated [24684.340900] wlp4s0: associate with XXX (try 1/3) [24684.347555] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [24684.347808] wlp4s0: associated [24684.437614] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [24684.437677] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [29003.957849] usb 1-2: USB disconnect, device number 4 [29004.500457] usb 1-2: new full-speed USB device number 5 using xhci_hcd [29004.660078] usb 1-2: New USB device found, idVendor=1b80, idProduct=b412, bcdDevice= 7.13 [29004.660086] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29004.660089] usb 1-2: Product: MECHREV Gaming Mouse [29004.660091] usb 1-2: Manufacturer: Jtech [29004.672341] input: Jtech MECHREV Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-2/1-2:1.0/0003:1B80:B412.0005/input/input20 [29004.672445] hid-generic 0003:1B80:B412.0005: input,hidraw0: USB HID v1.11 Mouse [Jtech MECHREV Gaming Mouse] on usb-0000:05:00.3-2/input0 [29004.679619] input: Jtech MECHREV Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-2/1-2:1.1/0003:1B80:B412.0006/input/input21 [29004.733990] hid-generic 0003:1B80:B412.0006: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Jtech MECHREV Gaming Mouse] on usb-0000:05:00.3-2/input1 [29028.026786] usb 1-2: USB disconnect, device number 5 [29028.540445] usb 1-2: new full-speed USB device number 6 using xhci_hcd [29028.697069] usb 1-2: New USB device found, idVendor=1b80, idProduct=b412, bcdDevice= 7.13 [29028.697075] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29028.697078] usb 1-2: Product: MECHREV Gaming Mouse [29028.697080] usb 1-2: Manufacturer: Jtech [29028.709280] input: Jtech MECHREV Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-2/1-2:1.0/0003:1B80:B412.0007/input/input22 [29028.709408] hid-generic 0003:1B80:B412.0007: input,hidraw0: USB HID v1.11 Mouse [Jtech MECHREV Gaming Mouse] on usb-0000:05:00.3-2/input0 [29028.716566] input: Jtech MECHREV Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-2/1-2:1.1/0003:1B80:B412.0008/input/input23 [29028.774236] hid-generic 0003:1B80:B412.0008: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Jtech MECHREV Gaming Mouse] on usb-0000:05:00.3-2/input1 [29036.325511] wlp4s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [29040.094305] PM: suspend entry (deep) [29040.154150] Filesystems sync: 0.059 seconds [29040.283748] rfkill: input handler enabled [29040.301124] Freezing user space processes ... (elapsed 0.002 seconds) done. [29040.303659] OOM killer disabled. [29040.303661] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [29040.305296] printk: Suspending console(s) (use no_console_suspend to debug) [29040.350475] sd 1:0:0:0: [sda] Synchronizing SCSI cache [29040.377276] sd 1:0:0:0: [sda] Stopping disk [29040.383890] [drm] free PSP TMR buffer [29041.344198] ACPI: EC: interrupt blocked [29041.693976] ACPI: PM: Preparing to enter system sleep state S3 [29042.024729] ACPI: EC: event blocked [29042.024734] ACPI: EC: EC stopped [29042.024736] ACPI: PM: Saving platform NVS memory [29042.024868] Disabling non-boot CPUs ... [29042.027243] smpboot: CPU 1 is now offline [29042.030250] smpboot: CPU 2 is now offline [29042.033108] smpboot: CPU 3 is now offline [29042.035782] smpboot: CPU 4 is now offline [29042.038332] smpboot: CPU 5 is now offline [29042.040814] smpboot: CPU 6 is now offline [29042.042915] smpboot: CPU 7 is now offline [29042.043350] ACPI: PM: Low-level resume complete [29042.043350] ACPI: EC: EC started [29042.043350] ACPI: PM: Restoring platform NVS memory [29042.043350] AMD-Vi: Virtual APIC enabled [29042.043350] AMD-Vi: Virtual APIC enabled [29042.044480] Enabling non-boot CPUs ... [29042.044546] x86: Booting SMP configuration: [29042.044547] smpboot: Booting Node 0 Processor 1 APIC 0x1 [29042.044074] microcode: CPU1: patch_level=0x08108102 [29042.045072] ACPI: \_PR_.P001: Found 2 idle states [29042.045415] CPU1 is up [29042.045493] smpboot: Booting Node 0 Processor 2 APIC 0x2 [29042.044884] microcode: CPU2: patch_level=0x08108102 [29042.046167] ACPI: \_PR_.P002: Found 2 idle states [29042.046701] CPU2 is up [29042.046742] smpboot: Booting Node 0 Processor 3 APIC 0x3 [29042.045783] microcode: CPU3: patch_level=0x08108102 [29042.047337] ACPI: \_PR_.P003: Found 2 idle states [29042.047738] CPU3 is up [29042.047776] smpboot: Booting Node 0 Processor 4 APIC 0x4 [29042.047055] microcode: CPU4: patch_level=0x08108102 [29042.048645] ACPI: \_PR_.P004: Found 2 idle states [29042.049070] CPU4 is up [29042.049120] smpboot: Booting Node 0 Processor 5 APIC 0x5 [29042.048279] microcode: CPU5: patch_level=0x08108102 [29042.049592] ACPI: \_PR_.P005: Found 2 idle states [29042.050108] CPU5 is up [29042.050146] smpboot: Booting Node 0 Processor 6 APIC 0x6 [29042.049346] microcode: CPU6: patch_level=0x08108102 [29042.050869] ACPI: \_PR_.P006: Found 2 idle states [29042.051777] CPU6 is up [29042.051819] smpboot: Booting Node 0 Processor 7 APIC 0x7 [29042.050473] microcode: CPU7: patch_level=0x08108102 [29042.052325] ACPI: \_PR_.P007: Found 2 idle states [29042.053057] CPU7 is up [29042.053748] ACPI: PM: Waking up from system sleep state S3 [29042.217647] ACPI: EC: interrupt unblocked [29042.595579] ACPI: EC: event unblocked [29042.596488] [drm] PCIE GART of 1024M enabled. [29042.596490] [drm] PTB located at 0x000000F400A00000 [29042.596507] [drm] PSP is resuming... [29042.602666] nvme nvme0: 16/0/0 default/read/poll queues [29042.605983] sd 1:0:0:0: [sda] Starting disk [29042.616525] [drm] reserve 0x400000 from 0xf401c00000 for PSP TMR [29042.713719] amdgpu 0000:05:00.0: amdgpu: RAS: optional ras ta ucode is not available [29042.727878] amdgpu 0000:05:00.0: amdgpu: RAP: optional rap ta ucode is not available [29042.734092] amdgpu: restore the fine grain parameters [29042.856081] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [29042.919165] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [29043.325024] [drm] kiq ring mec 2 pipe 1 q 0 [29043.336470] [drm] VCN decode and encode initialized successfully(under SPG Mode). [29043.336490] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [29043.336493] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [29043.336495] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [29043.336497] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [29043.336498] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [29043.336500] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [29043.336501] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [29043.336502] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [29043.336504] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [29043.336505] amdgpu 0000:05:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [29043.336506] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [29043.336508] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [29043.336509] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [29043.336510] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [29043.336512] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [29044.887178] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [29045.020981] ata2.00: configured for UDMA/133 [29045.068077] OOM killer enabled. [29045.068081] Restarting tasks ... done. [29045.072923] random: crng reseeded on system resumption [29045.074309] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [29045.077292] Bluetooth: hci0: RTL: rom_version status=0 version=3 [29045.077299] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [29045.083384] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [29045.086214] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35458 [29045.164391] PM: suspend exit [29045.438639] rfkill: input handler disabled [29045.536324] Bluetooth: hci0: RTL: fw version 0xffb8abd3 [29045.682327] Bluetooth: hci0: AOSP extensions version v1.00 [29045.682334] Bluetooth: hci0: AOSP quality report is supported [29063.327125] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [29063.520537] r8169 0000:02:00.0 enp2s0: Link is Down [29067.251347] wlp4s0: authenticate with XXX [29067.273785] wlp4s0: bad VHT capabilities, disabling VHT [29067.567210] wlp4s0: send auth to XXX (try 1/3) [29067.570548] wlp4s0: authenticated [29067.603776] wlp4s0: associate with XXX (try 1/3) [29067.610419] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [29067.610722] wlp4s0: associated [29067.684391] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [29067.833910] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [30686.523042] wlp4s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [30687.553546] PM: suspend entry (deep) [30688.631001] Filesystems sync: 1.077 seconds [30688.774732] rfkill: input handler enabled [30688.800723] Freezing user space processes ... (elapsed 0.002 seconds) done. [30688.802792] OOM killer disabled. [30688.802793] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [30688.803821] printk: Suspending console(s) (use no_console_suspend to debug) [30688.827252] sd 1:0:0:0: [sda] Synchronizing SCSI cache [30688.851095] sd 1:0:0:0: [sda] Stopping disk [30688.887820] [drm] free PSP TMR buffer [30689.831937] ACPI: EC: interrupt blocked [30690.180652] ACPI: PM: Preparing to enter system sleep state S3 [30690.504566] ACPI: EC: event blocked [30690.504572] ACPI: EC: EC stopped [30690.504573] ACPI: PM: Saving platform NVS memory [30690.504670] Disabling non-boot CPUs ... [30690.507555] smpboot: CPU 1 is now offline [30690.510284] smpboot: CPU 2 is now offline [30690.512656] smpboot: CPU 3 is now offline [30690.515249] smpboot: CPU 4 is now offline [30690.517452] smpboot: CPU 5 is now offline [30690.520101] smpboot: CPU 6 is now offline [30690.522232] smpboot: CPU 7 is now offline [30690.522505] ACPI: PM: Low-level resume complete [30690.522505] ACPI: EC: EC started [30690.522505] ACPI: PM: Restoring platform NVS memory [30690.522505] AMD-Vi: Virtual APIC enabled [30690.522505] AMD-Vi: Virtual APIC enabled [30690.522505] Enabling non-boot CPUs ... [30690.522505] x86: Booting SMP configuration: [30690.522505] smpboot: Booting Node 0 Processor 1 APIC 0x1 [30690.517456] microcode: CPU1: patch_level=0x08108102 [30690.523553] ACPI: \_PR_.P001: Found 2 idle states [30690.523914] CPU1 is up [30690.523984] smpboot: Booting Node 0 Processor 2 APIC 0x2 [30690.523284] microcode: CPU2: patch_level=0x08108102 [30690.524708] ACPI: \_PR_.P002: Found 2 idle states [30690.525025] CPU2 is up [30690.525074] smpboot: Booting Node 0 Processor 3 APIC 0x3 [30690.524357] microcode: CPU3: patch_level=0x08108102 [30690.525558] ACPI: \_PR_.P003: Found 2 idle states [30690.525993] CPU3 is up [30690.526030] smpboot: Booting Node 0 Processor 4 APIC 0x4 [30690.525302] microcode: CPU4: patch_level=0x08108102 [30690.527097] ACPI: \_PR_.P004: Found 2 idle states [30690.527766] CPU4 is up [30690.527801] smpboot: Booting Node 0 Processor 5 APIC 0x5 [30690.526728] microcode: CPU5: patch_level=0x08108102 [30690.528290] ACPI: \_PR_.P005: Found 2 idle states [30690.528791] CPU5 is up [30690.528843] smpboot: Booting Node 0 Processor 6 APIC 0x6 [30690.528038] microcode: CPU6: patch_level=0x08108102 [30690.529485] ACPI: \_PR_.P006: Found 2 idle states [30690.530476] CPU6 is up [30690.530512] smpboot: Booting Node 0 Processor 7 APIC 0x7 [30690.529149] microcode: CPU7: patch_level=0x08108102 [30690.531107] ACPI: \_PR_.P007: Found 2 idle states [30690.531754] CPU7 is up [30690.532488] ACPI: PM: Waking up from system sleep state S3 [30690.700947] ACPI: EC: interrupt unblocked [30691.082025] ACPI: EC: event unblocked [30691.083143] [drm] PCIE GART of 1024M enabled. [30691.083147] [drm] PTB located at 0x000000F400A00000 [30691.083169] [drm] PSP is resuming... [30691.088801] nvme nvme0: 16/0/0 default/read/poll queues [30691.092287] sd 1:0:0:0: [sda] Starting disk [30691.103188] [drm] reserve 0x400000 from 0xf401c00000 for PSP TMR [30691.200245] amdgpu 0000:05:00.0: amdgpu: RAS: optional ras ta ucode is not available [30691.214489] amdgpu 0000:05:00.0: amdgpu: RAP: optional rap ta ucode is not available [30691.220672] amdgpu: restore the fine grain parameters [30691.338397] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [30691.405514] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [30691.829404] [drm] kiq ring mec 2 pipe 1 q 0 [30691.840193] [drm] VCN decode and encode initialized successfully(under SPG Mode). [30691.840213] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [30691.840218] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [30691.840222] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [30691.840225] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [30691.840228] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [30691.840231] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [30691.840234] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [30691.840237] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [30691.840239] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [30691.840242] amdgpu 0000:05:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [30691.840245] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [30691.840248] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [30691.840250] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [30691.840253] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [30691.840276] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [30693.260324] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [30693.414405] ata2.00: configured for UDMA/133 [30693.461369] OOM killer enabled. [30693.461373] Restarting tasks ... [30693.464479] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [30693.465461] done. [30693.465479] random: crng reseeded on system resumption [30693.467483] Bluetooth: hci0: RTL: rom_version status=0 version=3 [30693.467492] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [30693.467515] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [30693.467543] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35458 [30693.540987] PM: suspend exit [30693.788497] rfkill: input handler disabled [30693.918486] Bluetooth: hci0: RTL: fw version 0xffb8abd3 [30694.064492] Bluetooth: hci0: AOSP extensions version v1.00 [30694.064499] Bluetooth: hci0: AOSP quality report is supported [30711.706993] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [30711.860372] r8169 0000:02:00.0 enp2s0: Link is Down [30716.094075] wlp4s0: authenticate with XXX [30716.120301] wlp4s0: bad VHT capabilities, disabling VHT [30716.407053] wlp4s0: send auth to XXX (try 1/3) [30716.410674] wlp4s0: authenticated [30716.436969] wlp4s0: associate with XXX (try 1/3) [30716.447593] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [30716.447844] wlp4s0: associated [30716.520410] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [30716.540512] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [32883.653448] usb 3-2: new full-speed USB device number 3 using xhci_hcd [32883.823499] usb 3-2: New USB device found, idVendor=2563, idProduct=0580, bcdDevice= 1.00 [32883.823506] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [32883.823509] usb 3-2: Product: Redgear [32883.823511] usb 3-2: Manufacturer: hongjingda [32883.877012] input: hongjingda Redgear as /devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-2/3-2:1.0/0003:2563:0580.0009/input/input24 [32883.877103] hid-generic 0003:2563:0580.0009: input,hidraw2: USB HID v1.11 Gamepad [hongjingda Redgear] on usb-0000:05:00.4-2/input0 [32883.951774] usb 3-2: USB disconnect, device number 3 [32884.403399] usb 3-2: new full-speed USB device number 4 using xhci_hcd [32884.579975] usb 3-2: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10 [32884.579981] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [32884.579983] usb 3-2: Product: Redgear [32884.579984] usb 3-2: Manufacturer: hongjingda [32884.579985] usb 3-2: SerialNumber: ... [32884.656270] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:08.1/0000:05:00.4/usb3/3-2/3-2:1.0/input/input25 [32884.656373] usbcore: registered new interface driver xpad [34788.926298] wlp4s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [34789.900361] PM: suspend entry (deep) [34790.086681] Filesystems sync: 0.186 seconds [34790.246396] rfkill: input handler enabled [34790.266488] Freezing user space processes ... (elapsed 0.002 seconds) done. [34790.268895] OOM killer disabled. [34790.268896] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [34790.270088] printk: Suspending console(s) (use no_console_suspend to debug) [34790.299883] sd 1:0:0:0: [sda] Synchronizing SCSI cache [34790.323300] sd 1:0:0:0: [sda] Stopping disk [34790.351062] [drm] free PSP TMR buffer [34791.365622] ACPI: EC: interrupt blocked [34791.713037] ACPI: PM: Preparing to enter system sleep state S3 [34792.050788] ACPI: EC: event blocked [34792.050794] ACPI: EC: EC stopped [34792.050795] ACPI: PM: Saving platform NVS memory [34792.050925] Disabling non-boot CPUs ... [34792.053569] smpboot: CPU 1 is now offline [34792.056781] smpboot: CPU 2 is now offline [34792.059391] smpboot: CPU 3 is now offline [34792.062208] smpboot: CPU 4 is now offline [34792.064647] smpboot: CPU 5 is now offline [34792.067268] smpboot: CPU 6 is now offline [34792.069383] smpboot: CPU 7 is now offline [34792.069901] ACPI: PM: Low-level resume complete [34792.069901] ACPI: EC: EC started [34792.069901] ACPI: PM: Restoring platform NVS memory [34792.069901] AMD-Vi: Virtual APIC enabled [34792.069901] AMD-Vi: Virtual APIC enabled [34792.069901] Enabling non-boot CPUs ... [34792.069901] x86: Booting SMP configuration: [34792.069901] smpboot: Booting Node 0 Processor 1 APIC 0x1 [34792.069422] microcode: CPU1: patch_level=0x08108102 [34792.071518] ACPI: \_PR_.P001: Found 2 idle states [34792.071848] CPU1 is up [34792.071899] smpboot: Booting Node 0 Processor 2 APIC 0x2 [34792.071272] microcode: CPU2: patch_level=0x08108102 [34792.072546] ACPI: \_PR_.P002: Found 2 idle states [34792.073071] CPU2 is up [34792.073099] smpboot: Booting Node 0 Processor 3 APIC 0x3 [34792.072192] microcode: CPU3: patch_level=0x08108102 [34792.073741] ACPI: \_PR_.P003: Found 2 idle states [34792.074131] CPU3 is up [34792.074164] smpboot: Booting Node 0 Processor 4 APIC 0x4 [34792.073542] microcode: CPU4: patch_level=0x08108102 [34792.075012] ACPI: \_PR_.P004: Found 2 idle states [34792.075465] CPU4 is up [34792.075502] smpboot: Booting Node 0 Processor 5 APIC 0x5 [34792.074681] microcode: CPU5: patch_level=0x08108102 [34792.075976] ACPI: \_PR_.P005: Found 2 idle states [34792.076548] CPU5 is up [34792.076573] smpboot: Booting Node 0 Processor 6 APIC 0x6 [34792.075732] microcode: CPU6: patch_level=0x08108102 [34792.077265] ACPI: \_PR_.P006: Found 2 idle states [34792.078226] CPU6 is up [34792.078258] smpboot: Booting Node 0 Processor 7 APIC 0x7 [34792.076876] microcode: CPU7: patch_level=0x08108102 [34792.078749] ACPI: \_PR_.P007: Found 2 idle states [34792.079474] CPU7 is up [34792.080223] ACPI: PM: Waking up from system sleep state S3 [34792.241342] ACPI: EC: interrupt unblocked [34792.614797] ACPI: EC: event unblocked [34792.615688] [drm] PCIE GART of 1024M enabled. [34792.615692] [drm] PTB located at 0x000000F400A00000 [34792.615711] [drm] PSP is resuming... [34792.621775] nvme nvme0: 16/0/0 default/read/poll queues [34792.625175] sd 1:0:0:0: [sda] Starting disk [34792.635729] [drm] reserve 0x400000 from 0xf401c00000 for PSP TMR [34792.734075] amdgpu 0000:05:00.0: amdgpu: RAS: optional ras ta ucode is not available [34792.748285] amdgpu 0000:05:00.0: amdgpu: RAP: optional rap ta ucode is not available [34792.754572] amdgpu: restore the fine grain parameters [34792.919261] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [34792.938310] usb 1-4: reset full-speed USB device number 3 using xhci_hcd [34793.354296] [drm] kiq ring mec 2 pipe 1 q 0 [34793.365062] [drm] VCN decode and encode initialized successfully(under SPG Mode). [34793.365076] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [34793.365080] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [34793.365081] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [34793.365083] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [34793.365084] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [34793.365085] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [34793.365087] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [34793.365088] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [34793.365089] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [34793.365090] amdgpu 0000:05:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [34793.365092] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [34793.365093] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [34793.365095] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [34793.365096] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [34793.365097] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [34794.733287] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [34794.899756] ata2.00: configured for UDMA/133 [34794.947523] OOM killer enabled. [34794.947527] Restarting tasks ... [34794.949264] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [34794.952595] Bluetooth: hci0: RTL: rom_version status=0 version=3 [34794.952603] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [34794.953480] done. [34794.953497] random: crng reseeded on system resumption [34794.960366] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [34794.963868] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35458 [34795.013740] PM: suspend exit [34795.298892] rfkill: input handler disabled [34795.412260] Bluetooth: hci0: RTL: fw version 0xffb8abd3 [34795.558281] Bluetooth: hci0: AOSP extensions version v1.00 [34795.558289] Bluetooth: hci0: AOSP quality report is supported [34813.206558] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [34813.396631] r8169 0000:02:00.0 enp2s0: Link is Down [34818.520776] wlp4s0: authenticate with XXX [34818.543212] wlp4s0: bad VHT capabilities, disabling VHT [34818.853303] wlp4s0: send auth to XXX (try 1/3) [34818.856631] wlp4s0: authenticated [34818.896533] wlp4s0: associate with XXX (try 1/3) [34818.903161] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [34818.903458] wlp4s0: associated [34818.913541] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [34819.019986] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [35930.167911] usb 1-2: USB disconnect, device number 6 [35930.646429] usb 1-2: new full-speed USB device number 7 using xhci_hcd [35930.803362] usb 1-2: New USB device found, idVendor=1b80, idProduct=b412, bcdDevice= 7.13 [35930.803368] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [35930.803370] usb 1-2: Product: MECHREV Gaming Mouse [35930.803371] usb 1-2: Manufacturer: Jtech [35930.815578] input: Jtech MECHREV Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-2/1-2:1.0/0003:1B80:B412.000A/input/input26 [35930.815738] hid-generic 0003:1B80:B412.000A: input,hidraw0: USB HID v1.11 Mouse [Jtech MECHREV Gaming Mouse] on usb-0000:05:00.3-2/input0 [35930.822787] input: Jtech MECHREV Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:05:00.3/usb1/1-2/1-2:1.1/0003:1B80:B412.000B/input/input27 [35930.876658] hid-generic 0003:1B80:B412.000B: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Jtech MECHREV Gaming Mouse] on usb-0000:05:00.3-2/input1 [40070.523124] wlp4s0: authenticate with XXX [40070.542687] wlp4s0: bad VHT capabilities, disabling VHT [40070.832769] wlp4s0: send auth to XXX (try 1/3) [40070.836099] wlp4s0: authenticated [40070.866012] wlp4s0: associate with XXX (try 1/3) [40070.872636] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [40070.872914] wlp4s0: associated [40071.058585] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [44626.936003] wlp4s0: authenticate with XXX [44626.962231] wlp4s0: bad VHT capabilities, disabling VHT [44627.255647] wlp4s0: send auth to XXX (try 1/3) [44627.262230] wlp4s0: authenticated [44627.285559] wlp4s0: associate with XXX (try 1/3) [44627.294859] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [44627.295112] wlp4s0: associated [44627.387748] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [45491.741629] wlp4s0: Connection to AP XXX lost [45500.862593] wlp4s0: authenticate with XXX [45500.892144] wlp4s0: bad VHT capabilities, disabling VHT [45501.185565] wlp4s0: send auth to XXX (try 1/3) [45501.192151] wlp4s0: authenticated [45501.218805] wlp4s0: associate with XXX (try 1/3) [45501.226478] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [45501.226726] wlp4s0: associated [45501.278871] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [45526.490316] wlp4s0: Connection to AP XXX lost [45530.392599] wlp4s0: authenticate with XXX [45530.415474] wlp4s0: bad VHT capabilities, disabling VHT [45530.705552] wlp4s0: send auth to XXX (try 1/3) [45530.722499] wlp4s0: authenticated [45530.762132] wlp4s0: associate with XXX (try 1/3) [45530.875462] wlp4s0: associate with XXX (try 2/3) [45530.982137] wlp4s0: associate with XXX (try 3/3) [45530.988733] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [45530.989009] wlp4s0: associated [45534.289354] wlp4s0: Connection to AP XXX lost [45558.097903] wlp4s0: authenticate with XXX [45558.128896] wlp4s0: bad VHT capabilities, disabling VHT [45558.435558] wlp4s0: send auth to XXX (try 1/3) [45558.438869] wlp4s0: authenticated [45558.468801] wlp4s0: associate with XXX (try 1/3) [45558.475419] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [45558.475704] wlp4s0: associated [45558.502713] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [45558.572297] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [50104.717404] wlp4s0: Connection to AP XXX lost [50105.045016] rtw_8822ce 0000:04:00.0: timed out to flush queue 1 [50105.185001] rtw_8822ce 0000:04:00.0: timed out to flush queue 1 [50364.248792] wlp4s0: authenticate with XXX [50364.275057] wlp4s0: bad VHT capabilities, disabling VHT [50364.558412] wlp4s0: send auth to XXX (try 1/3) [50364.561716] wlp4s0: authenticated [50364.594980] wlp4s0: associate with XXX (try 1/3) [50364.601588] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [50364.601849] wlp4s0: associated [50364.685140] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [50364.725032] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [57999.678432] fossilize_repla[73904]: segfault at 18 ip 00005631fb8fe17e sp 00007ffc238d0180 error 4 in fossilize_replay[5631fb895000+23e000] [57999.678456] Code: 85 db 75 d8 49 8b 9f 60 02 00 00 48 85 db 74 2c 0f 1f 40 00 48 8b 73 10 48 85 f6 0f 84 83 02 00 00 49 8b 87 f8 0c 00 00 31 d2 <48> 8b 78 18 ff 15 50 45 21 00 48 8b 1b 48 85 db 75 d8 49 8b 9f 98 [58019.885413] fossilize_repla[73881]: segfault at 18 ip 00005631fb8fe17e sp 00007ffc238d0180 error 4 in fossilize_replay[5631fb895000+23e000] [58019.885432] Code: 85 db 75 d8 49 8b 9f 60 02 00 00 48 85 db 74 2c 0f 1f 40 00 48 8b 73 10 48 85 f6 0f 84 83 02 00 00 49 8b 87 f8 0c 00 00 31 d2 <48> 8b 78 18 ff 15 50 45 21 00 48 8b 1b 48 85 db 75 d8 49 8b 9f 98 [58213.518882] wlp4s0: Connection to AP XXX lost [58217.387979] wlp4s0: authenticate with XXX [58217.414354] wlp4s0: bad VHT capabilities, disabling VHT [58217.704680] wlp4s0: send auth to XXX (try 1/3) [58217.729215] wlp4s0: send auth to XXX (try 2/3) [58217.757365] wlp4s0: authenticated [58217.780958] wlp4s0: associate with XXX (try 1/3) [58217.794336] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [58217.794646] wlp4s0: associated [58217.821846] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [59825.071419] wlp4s0: Connection to AP XXX lost [59867.954679] wlp4s0: authenticate with XXX [59867.980737] wlp4s0: bad VHT capabilities, disabling VHT [59868.270827] wlp4s0: send auth to XXX (try 1/3) [59868.274171] wlp4s0: authenticated [59868.297397] wlp4s0: associate with XXX (try 1/3) [59868.304096] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [59868.304344] wlp4s0: associated [59868.360902] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [59868.420766] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [65387.863520] usb 1-3: new high-speed USB device number 8 using xhci_hcd [65388.009558] usb 1-3: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 2.01 [65388.009565] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [65388.009567] usb 1-3: Product: Cruzer Blade [65388.009569] usb 1-3: Manufacturer: SanDisk [65388.009571] usb 1-3: SerialNumber: ... [65388.062419] usb-storage 1-3:1.0: USB Mass Storage device detected [65388.062623] scsi host2: usb-storage 1-3:1.0 [65388.062725] usbcore: registered new interface driver usb-storage [65388.068434] usbcore: registered new interface driver uas [65389.087906] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6 [65389.089499] sd 2:0:0:0: Attached scsi generic sg1 type 0 [65389.090579] sd 2:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.73 GiB) [65389.091824] sd 2:0:0:0: [sdb] Write Protect is off [65389.091829] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [65389.092180] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [65389.105347] sdb: sdb1 [65389.105485] sd 2:0:0:0: [sdb] Attached SCSI disk [65390.532431] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none. [65526.431274] wlp4s0: authenticate with XXX [65526.453702] wlp4s0: bad VHT capabilities, disabling VHT [65526.743960] wlp4s0: send auth to XXX (try 1/3) [65526.750596] wlp4s0: authenticated [65526.780133] wlp4s0: associate with XXX (try 1/3) [65526.786797] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [65526.787078] wlp4s0: associated [65526.980223] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [66685.801359] wlp4s0: authenticate with XXX [66685.816719] wlp4s0: bad VHT capabilities, disabling VHT [66686.103437] wlp4s0: send auth to XXX (try 1/3) [66686.106761] wlp4s0: authenticated [66686.136724] wlp4s0: associate with XXX (try 1/3) [66686.143404] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [66686.143678] wlp4s0: associated [66686.176392] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [67939.031239] gameoverlayui[78917]: segfault at 0 ip 0000000000000000 sp 00000000ff9f195c error 14 in gameoverlayui[565a9000+1000] [67939.031268] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [71376.461912] wlp4s0: Connection to AP XXX lost [72228.270538] wlp4s0: authenticate with XXX [72228.289466] wlp4s0: bad VHT capabilities, disabling VHT [72228.576221] wlp4s0: send auth to XXX (try 1/3) [72228.579542] wlp4s0: authenticated [72228.602880] wlp4s0: associate with XXX (try 1/3) [72228.609513] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [72228.609769] wlp4s0: associated [72228.689523] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [72228.689583] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [72252.671090] wlp4s0: Connection to AP XXX lost [72272.226440] wlp4s0: authenticate with XXX [72272.252801] wlp4s0: bad VHT capabilities, disabling VHT [72272.546220] wlp4s0: send auth to XXX (try 1/3) [72272.563716] wlp4s0: authenticated [72272.589453] wlp4s0: associate with XXX (try 1/3) [72272.602832] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [72272.603090] wlp4s0: associated [72272.711579] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [72273.709600] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [72275.709611] wlp4s0: Connection to AP XXX lost [72314.977318] wlp4s0: authenticate with XXX [72315.006183] wlp4s0: bad VHT capabilities, disabling VHT [72315.299545] wlp4s0: send auth to XXX (try 1/3) [72315.320850] wlp4s0: send auth to XXX (try 2/3) [72315.349475] wlp4s0: send auth to XXX (try 3/3) [72315.375683] wlp4s0: authentication with XXX timed out [72337.000002] wlp4s0: authenticate with XXX [72337.019477] wlp4s0: bad VHT capabilities, disabling VHT [72337.309547] wlp4s0: send auth to XXX (try 1/3) [72337.335997] wlp4s0: send auth to XXX (try 2/3) [72337.361650] wlp4s0: send auth to XXX (try 3/3) [72337.382639] wlp4s0: authentication with XXX timed out [72344.270246] wlp4s0: authenticate with XXX [72344.302809] wlp4s0: bad VHT capabilities, disabling VHT [72344.592876] wlp4s0: send auth to XXX (try 1/3) [72344.596215] wlp4s0: authenticated [72344.626114] wlp4s0: associate with XXX (try 1/3) [72344.632777] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [72344.633043] wlp4s0: associated [72344.716272] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [72344.906388] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [72351.314976] wlp4s0: Connection to AP XXX lost [72360.670028] wlp4s0: authenticate with XXX [72360.689461] wlp4s0: bad VHT capabilities, disabling VHT [72360.982872] wlp4s0: send auth to XXX (try 1/3) [72360.986202] wlp4s0: authenticated [72361.016129] wlp4s0: associate with XXX (try 1/3) [72361.022755] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [72361.023039] wlp4s0: associated [72362.315052] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [72385.080543] wlp4s0: Connection to AP XXX lost [72388.956558] wlp4s0: authenticate with XXX [72389.006120] wlp4s0: bad VHT capabilities, disabling VHT [72389.296202] wlp4s0: send auth to XXX (try 1/3) [72389.299501] wlp4s0: authenticated [72389.339452] wlp4s0: associate with XXX (try 1/3) [72389.354600] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [72389.354862] wlp4s0: associated [72389.554509] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [72490.502833] wlp4s0: cannot understand ECSA IE operating class, 4, ignoring [72490.524972] wlp4s0: cannot understand ECSA IE operating class, 4, ignoring [72490.627373] wlp4s0: cannot understand ECSA IE operating class, 4, ignoring [72493.464299] wlp4s0: Connection to AP XXX lost [72493.802785] rtw_8822ce 0000:04:00.0: timed out to flush queue 1 [72502.923287] wlp4s0: authenticate with XXX [72502.952793] wlp4s0: bad VHT capabilities, disabling VHT [72503.387671] wlp4s0: send auth to XXX (try 1/3) [72503.395809] wlp4s0: authenticated [72503.426101] wlp4s0: associate with XXX (try 1/3) [72503.432866] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [72503.433150] wlp4s0: associated [72503.552806] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [74082.833421] usb 1-3: USB disconnect, device number 8 [74082.868378] EXT4-fs (sdb1): unmounting filesystem. [74082.868501] Buffer I/O error on dev sdb1, logical block 425984, lost sync page write [74082.868506] JBD2: Error -5 detected when updating journal superblock for sdb1-8. [74082.868509] Aborting journal on device sdb1-8. [74082.868514] Buffer I/O error on dev sdb1, logical block 425984, lost sync page write [74082.868516] JBD2: Error -5 detected when updating journal superblock for sdb1-8. [74082.868543] EXT4-fs error (device sdb1): ext4_put_super:1223: comm umount: Couldn't clean up the journal [74082.868547] EXT4-fs (sdb1): Remounting filesystem read-only [74161.505118] wlp4s0: Connection to AP XXX lost [74165.399751] wlp4s0: authenticate with XXX [74165.435945] wlp4s0: bad VHT capabilities, disabling VHT [74165.732698] wlp4s0: send auth to XXX (try 1/3) [74165.742162] wlp4s0: authenticated [74165.772626] wlp4s0: associate with XXX (try 1/3) [74165.792602] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [74165.792867] wlp4s0: associated [74167.902929] wlp4s0: Connection to AP XXX lost [74171.826463] wlp4s0: authenticate with XXX [74171.845938] wlp4s0: bad VHT capabilities, disabling VHT [74172.139356] wlp4s0: send auth to XXX (try 1/3) [74172.142687] wlp4s0: authenticated [74172.172602] wlp4s0: associate with XXX (try 1/3) [74172.179210] wlp4s0: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [74172.179486] wlp4s0: associated [74172.434503] wlp4s0: Limiting TX power to 0 (-128 - 0) dBm as advertised by XXX [74484.615932] usb 1-3: new high-speed USB device number 9 using xhci_hcd [74484.765106] usb 1-3: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 2.01 [74484.765117] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [74484.765120] usb 1-3: Product: Cruzer Blade [74484.765123] usb 1-3: Manufacturer: SanDisk [74484.765126] usb 1-3: SerialNumber: ... [74484.766185] usb-storage 1-3:1.0: USB Mass Storage device detected [74484.766614] scsi host2: usb-storage 1-3:1.0 [74485.783802] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 2.01 PQ: 0 ANSI: 6 [74485.785578] sd 2:0:0:0: Attached scsi generic sg1 type 0 [74485.786718] sd 2:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.73 GiB) [74485.787944] sd 2:0:0:0: [sdb] Write Protect is off [74485.787950] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [74485.788324] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [74485.802048] sdb: sdb1 [74485.802351] sd 2:0:0:0: [sdb] Attached SCSI disk [74486.185553] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none. [76830.350740] st: Version 20160209, fixed bufsize 32768, s/g segs 256