[ 0.000000] Linux version 6.8.0-41-generic (XXX@XXX) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #41-Ubuntu SMP PREEMPT_DYNAMIC Fri Aug 2 20:41:06 UTC 2024 (Ubuntu 6.8.0-41.41-generic 6.8.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-41-generic root=UUID=HASH_665-B01C-40A0-FA46-4E70180F7A69 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009601fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009602000-0x00000000097fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000009800000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000005cf10fff] usable [ 0.000000] BIOS-e820: [mem 0x000000005cf11000-0x000000005da39fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005da3a000-0x000000005dab6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000005dab7000-0x000000005dc65fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000005dc66000-0x000000005e4f2fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000005e4f3000-0x000000005effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000021f340000-0x000000021fffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0x5a2b4018-0x5a2c1457] usable ==> usable [ 0.000000] e820: update [mem 0x5a2b4018-0x5a2c1457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009601fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009602000-0x00000000097fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000009800000-0x000000000a1fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000000a20b000-0x000000005a2b4017] usable [ 0.000000] reserve setup_data: [mem 0x000000005a2b4018-0x000000005a2c1457] usable [ 0.000000] reserve setup_data: [mem 0x000000005a2c1458-0x000000005cf10fff] usable [ 0.000000] reserve setup_data: [mem 0x000000005cf11000-0x000000005da39fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000005da3a000-0x000000005dab6fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000005dab7000-0x000000005dc65fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000005dc66000-0x000000005e4f2fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000005e4f3000-0x000000005effffff] usable [ 0.000000] reserve setup_data: [mem 0x000000005f000000-0x00000000dfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f33ffff] usable [ 0.000000] reserve setup_data: [mem 0x000000021f340000-0x000000021fffffff] reserved [ 0.000000] efi: EFI v2.7 by American Megatrends [ 0.000000] efi: TPMFinalLog=0x5dc1e000 ACPI 2.0=0x5da53000 ACPI=0x5da53000 SMBIOS=0x5e2df000 SMBIOS 3.0=0x5e2de000 ESRT=0x5c336c18 MOKvar=0x5e318000 INITRD=0x5a2d4298 RNG=0x5da52018 TPMEventLog=0x5a2c2018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem227: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.000000] efi: Remove mem228: MMIO range=[0xfd000000-0xffffffff] (48MB) from e820 map [ 0.000000] e820: remove [mem 0xfd000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. VivoBook_ASUSLaptop X512DA_F512DA/X512DA, BIOS X512DA.318 09/28/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2096.011 MHz processor [ 0.000226] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000229] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000236] last_pfn = 0x21f340 max_arch_pfn = 0x400000000 [ 0.000244] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs [ 0.000246] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000543] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000553] last_pfn = 0x5f000 max_arch_pfn = 0x400000000 [ 0.004524] esrt: Reserving ESRT space from 0x000000005c336c18 to 0x000000005c336c50. [ 0.004532] e820: update [mem 0x5c336000-0x5c336fff] usable ==> reserved [ 0.004563] Using GB pages for direct mapping [ 0.005230] secureboot: Secure boot disabled [ 0.005231] RAMDISK: [mem 0x4d17c000-0x51024fff] [ 0.005677] ACPI: Early table checksum verification disabled [ 0.005681] ACPI: RSDP 0x000000005DA53000 000024 (v02 _ASUS_) [ 0.005685] ACPI: XSDT 0x000000005DA530A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005692] ACPI: FACP 0x000000005DA5E538 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005697] ACPI: DSDT 0x000000005DA53210 00B322 (v02 _ASUS_ Notebook 01072009 INTL 20120913) [ 0.005701] ACPI: FACS 0x000000005DC1DD80 000040 [ 0.005703] ACPI: APIC 0x000000005DA5E650 0000DE (v04 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005707] ACPI: FPDT 0x000000005DA5E730 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005709] ACPI: FIDT 0x000000005DA5E778 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005712] ACPI: ECDT 0x000000005DA5E818 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.005715] ACPI: SSDT 0x000000005DA5E8E0 005419 (v02 AMD AmdTable 00000002 MSFT 02000002) [ 0.005718] ACPI: MCFG 0x000000005DA63D00 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013) [ 0.005721] ACPI: MSDM 0x000000005DA63D40 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001) [ 0.005724] ACPI: HPET 0x000000005DA63D98 000038 (v01 _ASUS_ Notebook 01072009 AMI 00000005) [ 0.005727] ACPI: UEFI 0x000000005DA63DD0 000042 (v01 _ASUS_ Notebook 00000002 01000013) [ 0.005730] ACPI: VFCT 0x000000005DA63E18 00D484 (v01 _ASUS_ Notebook 00000001 AMD 31504F47) [ 0.005733] ACPI: BGRT 0x000000005DA712A0 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005736] ACPI: TPM2 0x000000005DA712D8 00004C (v04 _ASUS_ Notebook 00000001 AMI 00000000) [ 0.005739] ACPI: IVRS 0x000000005DA71328 00013E (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.005742] ACPI: SSDT 0x000000005DA71468 00119C (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.005745] ACPI: CRAT 0x000000005DA72608 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.005747] ACPI: CDIT 0x000000005DA72E18 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.005750] ACPI: SSDT 0x000000005DA72E48 000C77 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.005753] ACPI: SSDT 0x000000005DA73AC0 0010A5 (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.005756] ACPI: SSDT 0x000000005DA74B68 0023FF (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.005759] ACPI: WSMT 0x000000005DA76F68 000028 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.005762] ACPI: SSDT 0x000000005DA76F90 0002FE (v01 AMD AmdTable 00000001 INTL 20120913) [ 0.005764] ACPI: Reserving FACP table memory at [mem 0x5da5e538-0x5da5e64b] [ 0.005766] ACPI: Reserving DSDT table memory at [mem 0x5da53210-0x5da5e531] [ 0.005767] ACPI: Reserving FACS table memory at [mem 0x5dc1dd80-0x5dc1ddbf] [ 0.005768] ACPI: Reserving APIC table memory at [mem 0x5da5e650-0x5da5e72d] [ 0.005769] ACPI: Reserving FPDT table memory at [mem 0x5da5e730-0x5da5e773] [ 0.005770] ACPI: Reserving FIDT table memory at [mem 0x5da5e778-0x5da5e813] [ 0.005771] ACPI: Reserving ECDT table memory at [mem 0x5da5e818-0x5da5e8d8] [ 0.005772] ACPI: Reserving SSDT table memory at [mem 0x5da5e8e0-0x5da63cf8] [ 0.005773] ACPI: Reserving MCFG table memory at [mem 0x5da63d00-0x5da63d3b] [ 0.005774] ACPI: Reserving MSDM table memory at [mem 0x5da63d40-0x5da63d94] [ 0.005775] ACPI: Reserving HPET table memory at [mem 0x5da63d98-0x5da63dcf] [ 0.005776] ACPI: Reserving UEFI table memory at [mem 0x5da63dd0-0x5da63e11] [ 0.005777] ACPI: Reserving VFCT table memory at [mem 0x5da63e18-0x5da7129b] [ 0.005778] ACPI: Reserving BGRT table memory at [mem 0x5da712a0-0x5da712d7] [ 0.005778] ACPI: Reserving TPM2 table memory at [mem 0x5da712d8-0x5da71323] [ 0.005779] ACPI: Reserving IVRS table memory at [mem 0x5da71328-0x5da71465] [ 0.005780] ACPI: Reserving SSDT table memory at [mem 0x5da71468-0x5da72603] [ 0.005781] ACPI: Reserving CRAT table memory at [mem 0x5da72608-0x5da72e17] [ 0.005782] ACPI: Reserving CDIT table memory at [mem 0x5da72e18-0x5da72e40] [ 0.005783] ACPI: Reserving SSDT table memory at [mem 0x5da72e48-0x5da73abe] [ 0.005784] ACPI: Reserving SSDT table memory at [mem 0x5da73ac0-0x5da74b64] [ 0.005785] ACPI: Reserving SSDT table memory at [mem 0x5da74b68-0x5da76f66] [ 0.005786] ACPI: Reserving WSMT table memory at [mem 0x5da76f68-0x5da76f8f] [ 0.005787] ACPI: Reserving SSDT table memory at [mem 0x5da76f90-0x5da7728d] [ 0.005967] No NUMA configuration found [ 0.005969] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff] [ 0.005978] NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff] [ 0.006183] Zone ranges: [ 0.006183] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006185] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.006187] Normal [mem 0x0000000100000000-0x000000021f33ffff] [ 0.006188] Device empty [ 0.006189] Movable zone start for each node [ 0.006192] Early memory node ranges [ 0.006193] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.006194] node 0: [mem 0x0000000000100000-0x0000000009601fff] [ 0.006195] node 0: [mem 0x0000000009800000-0x000000000a1fffff] [ 0.006196] node 0: [mem 0x000000000a20b000-0x000000005cf10fff] [ 0.006197] node 0: [mem 0x000000005e4f3000-0x000000005effffff] [ 0.006198] node 0: [mem 0x0000000100000000-0x000000021f33ffff] [ 0.006200] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff] [ 0.006205] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006224] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.006384] On node 0, zone DMA32: 510 pages in unavailable ranges [ 0.009497] On node 0, zone DMA32: 11 pages in unavailable ranges [ 0.009590] On node 0, zone DMA32: 5602 pages in unavailable ranges [ 0.020859] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.020902] On node 0, zone Normal: 3264 pages in unavailable ranges [ 0.021094] ACPI: PM-Timer IO Port: 0x808 [ 0.021105] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.021121] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.021129] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.021131] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.021133] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.021137] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.021139] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.021151] e820: update [mem 0x5a84b000-0x5a879fff] usable ==> reserved [ 0.021164] smpboot: Allowing 16 CPUs, 8 hotplug CPUs [ 0.021181] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.021183] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.021184] PM: hibernation: Registered nosave memory: [mem 0x09602000-0x097fffff] [ 0.021186] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff] [ 0.021187] PM: hibernation: Registered nosave memory: [mem 0x5a2b4000-0x5a2b4fff] [ 0.021189] PM: hibernation: Registered nosave memory: [mem 0x5a2c1000-0x5a2c1fff] [ 0.021190] PM: hibernation: Registered nosave memory: [mem 0x5a84b000-0x5a879fff] [ 0.021192] PM: hibernation: Registered nosave memory: [mem 0x5c336000-0x5c336fff] [ 0.021193] PM: hibernation: Registered nosave memory: [mem 0x5cf11000-0x5da39fff] [ 0.021194] PM: hibernation: Registered nosave memory: [mem 0x5da3a000-0x5dab6fff] [ 0.021195] PM: hibernation: Registered nosave memory: [mem 0x5dab7000-0x5dc65fff] [ 0.021196] PM: hibernation: Registered nosave memory: [mem 0x5dc66000-0x5e4f2fff] [ 0.021197] PM: hibernation: Registered nosave memory: [mem 0x5f000000-0xdfffffff] [ 0.021198] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xffffffff] [ 0.021200] [mem 0xe0000000-0xffffffff] available for PCI devices [ 0.021201] Booting paravirtualized kernel on bare hardware [ 0.021205] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.021214] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.022964] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 [ 0.022975] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 [ 0.022978] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 [ 0.022984] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 [ 0.023011] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-41-generic root=UUID=HASH_665-B01C-40A0-FA46-4E70180F7A69 ro quiet splash vt.handoff=7 [ 0.023102] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.8.0-41-generic", will be passed to user space. [ 0.024321] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.024936] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.025054] Fallback order for Node 0: 0 [ 0.025062] Built 1 zonelists, mobility grouping on. Total pages: 1534759 [ 0.025063] Policy zone: Normal [ 0.025073] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.025125] software IO TLB: area num 16. [ 0.058572] Memory: 5881184K/6237136K available (22528K kernel code, 4441K rwdata, 14308K rodata, 4972K init, 4736K bss, 355692K reserved, 0K cma-reserved) [ 0.059556] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.059593] ftrace: allocating 57864 entries in 227 pages [ 0.070146] ftrace: allocated 227 pages with 5 groups [ 0.071093] Dynamic Preempt: voluntary [ 0.071194] rcu: Preemptible hierarchical RCU implementation. [ 0.071195] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.071196] Trampoline variant of Tasks RCU enabled. [ 0.071197] Rude variant of Tasks RCU enabled. [ 0.071197] Tracing variant of Tasks RCU enabled. [ 0.071198] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.071199] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.073826] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16 [ 0.074054] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.074173] Console: colour dummy device 80x25 [ 0.074176] printk: legacy console [tty0] enabled [ 0.074221] ACPI: Core revision 20230628 [ 0.074402] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.074429] APIC: Switch to symmetric I/O mode setup [ 0.075541] AMD-Vi: ivrs, add hid:PNP0D40, uid:, rdevid:152 [ 0.075543] AMD-Vi: Using global IVHD EFR:0x4f77ef22294ada, EFR2:0x0 [ 0.075947] APIC: Switched APIC routing to: physical flat [ 0.076803] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.081433] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e36782ae2a, max_idle_ns: 440795207700 ns [ 0.081439] Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.02 BogoMIPS (lpj=2096011) [ 0.081450] AMD Zen1 DIV0 bug detected. Disable SMT for full protection. [ 0.081487] LVT offset 1 assigned for vector 0xf9 [ 0.081536] LVT offset 2 assigned for vector 0xf4 [ 0.081550] process: using mwait in idle threads [ 0.081552] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.081553] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.081556] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.081559] Spectre V2 : Mitigation: Retpolines [ 0.081560] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.081560] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.081561] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.081562] RETBleed: Mitigation: untrained return thunk [ 0.081564] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.081566] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.081567] Speculative Return Stack Overflow: Mitigation: Safe RET [ 0.081571] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.081573] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.081574] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.081575] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.081576] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.112657] Freeing SMP alternatives memory: 48K [ 0.112663] pid_max: default: 32768 minimum: 301 [ 0.117220] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.117250] landlock: Up and running. [ 0.117252] Yama: becoming mindful. [ 0.117300] AppArmor: AppArmor initialized [ 0.117372] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.117389] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.220620] smpboot: CPU0: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x18, stepping: 0x1) [ 0.220884] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.220910] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.220932] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.220955] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.220965] ... version: 0 [ 0.220967] ... bit width: 48 [ 0.220968] ... generic registers: 6 [ 0.220970] ... value mask: 0000ffffffffffff [ 0.220971] ... max period: 00007fffffffffff [ 0.220973] ... fixed-purpose events: 0 [ 0.220974] ... event mask: 000000000000003f [ 0.221104] signal: max sigframe size: 1776 [ 0.221172] rcu: Hierarchical SRCU implementation. [ 0.221174] rcu: Max phase no-delay instances is 400. [ 0.225599] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.225791] smp: Bringing up secondary CPUs ... [ 0.225937] smpboot: x86: Booting SMP configuration: [ 0.225939] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.235493] smp: Brought up 1 node, 8 CPUs [ 0.235493] smpboot: Max logical packages: 2 [ 0.235493] smpboot: Total of 8 processors activated (33536.17 BogoMIPS) [ 0.237624] devtmpfs: initialized [ 0.237624] x86/mm: Memory block size: 128MB [ 0.239653] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes) [ 0.239653] ACPI: PM: Registering ACPI NVS region [mem 0x5dab7000-0x5dc65fff] (1765376 bytes) [ 0.239653] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.239674] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.239785] pinctrl core: initialized pinctrl subsystem [ 0.239928] PM: RTC time: 00:06:29, date: 2024-09-02 [ 0.240952] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.241343] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.241519] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.241680] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.241726] thermal_sys: Registered thermal governor 'fair_share' [ 0.241726] thermal_sys: Registered thermal governor 'bang_bang' [ 0.241726] thermal_sys: Registered thermal governor 'step_wise' [ 0.241726] thermal_sys: Registered thermal governor 'user_space' [ 0.241726] thermal_sys: Registered thermal governor 'power_allocator' [ 0.241726] EISA bus registered [ 0.241726] cpuidle: using governor ladder [ 0.241726] cpuidle: using governor menu [ 0.241764] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.241764] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.242481] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.242488] PCI: not using ECAM ([mem 0xf8000000-0xfbffffff] not reserved) [ 0.242491] PCI: Using configuration type 1 for base access [ 0.242493] PCI: Using configuration type 1 for extended access [ 0.242724] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.242733] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.242733] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.242733] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.242733] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.243642] ACPI: Added _OSI(Module Device) [ 0.243646] ACPI: Added _OSI(Processor Device) [ 0.243648] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.243651] ACPI: Added _OSI(Processor Aggregator Device) [ 0.272775] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.274627] ACPI: EC: EC started [ 0.274630] ACPI: EC: interrupt blocked [ 0.275519] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.275522] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.277189] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.283514] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.284119] ACPI: Interpreter enabled [ 0.284148] ACPI: PM: (supports S0 S3 S4 S5) [ 0.284151] ACPI: Using IOAPIC for interrupt routing [ 0.286372] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.286459] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource [ 0.286474] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.286476] PCI: Using E820 reservations for host bridge windows [ 0.287088] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.306847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.306857] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.307060] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] [ 0.307430] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.307433] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.307452] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.308281] PCI host bridge to bus 0000:00 [ 0.308284] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.308287] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.308290] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.308293] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.308296] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.308300] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window] [ 0.308302] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.308306] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.308330] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 conventional PCI endpoint [ 0.308506] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 conventional PCI endpoint [ 0.308674] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint [ 0.308803] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 PCIe Root Port [ 0.308870] pci 0000:00:01.2: PCI bridge to [bus 01] [ 0.308890] pci 0000:00:01.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.308940] pci 0000:00:01.2: enabling Extended Tags [ 0.309120] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.309479] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint [ 0.309586] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 PCIe Root Port [ 0.309615] pci 0000:00:08.1: PCI bridge to [bus 02] [ 0.309622] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 0.309627] pci 0000:00:08.1: bridge window [mem 0xfca00000-0xfcdfffff] [ 0.309637] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.309649] pci 0000:00:08.1: enabling Extended Tags [ 0.309705] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.309919] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 PCIe Root Port [ 0.309945] pci 0000:00:08.2: PCI bridge to [bus 03] [ 0.309954] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 0.309972] pci 0000:00:08.2: enabling Extended Tags [ 0.310028] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.310241] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint [ 0.310433] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint [ 0.310642] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 conventional PCI endpoint [ 0.310707] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 conventional PCI endpoint [ 0.310769] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 conventional PCI endpoint [ 0.310830] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 conventional PCI endpoint [ 0.310894] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 conventional PCI endpoint [ 0.310956] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 conventional PCI endpoint [ 0.311019] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 conventional PCI endpoint [ 0.311084] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 conventional PCI endpoint [ 0.311561] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000 PCIe Endpoint [ 0.311646] pci 0000:01:00.0: BAR 0 [mem 0xfcf00000-0xfcf01fff 64bit] [ 0.311987] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.312969] pci 0000:00:01.2: PCI bridge to [bus 01] [ 0.313140] pci 0000:02:00.0: [1002:15d8] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.313161] pci 0000:02:00.0: BAR 0 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.313175] pci 0000:02:00.0: BAR 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.313185] pci 0000:02:00.0: BAR 4 [io 0xf000-0xf0ff] [ 0.313195] pci 0000:02:00.0: BAR 5 [mem 0xfcd00000-0xfcd7ffff] [ 0.313210] pci 0000:02:00.0: enabling Extended Tags [ 0.313302] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.313521] pci 0000:02:00.1: [1002:15de] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.313536] pci 0000:02:00.1: BAR 0 [mem 0xfcdc8000-0xfcdcbfff] [ 0.313573] pci 0000:02:00.1: enabling Extended Tags [ 0.313626] pci 0000:02:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.313760] pci 0000:02:00.2: [1022:15df] type 00 class 0x108000 PCIe Endpoint [ 0.313784] pci 0000:02:00.2: BAR 2 [mem 0xfcc00000-0xfccfffff] [ 0.313801] pci 0000:02:00.2: BAR 5 [mem 0xfcdcc000-0xfcdcdfff] [ 0.313815] pci 0000:02:00.2: enabling Extended Tags [ 0.313994] pci 0000:02:00.3: [1022:15e0] type 00 class 0x0c0330 PCIe Endpoint [ 0.314014] pci 0000:02:00.3: BAR 0 [mem 0xfcb00000-0xfcbfffff 64bit] [ 0.314056] pci 0000:02:00.3: enabling Extended Tags [ 0.314113] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold [ 0.314278] pci 0000:02:00.4: [1022:15e1] type 00 class 0x0c0330 PCIe Endpoint [ 0.314298] pci 0000:02:00.4: BAR 0 [mem 0xfca00000-0xfcafffff 64bit] [ 0.314340] pci 0000:02:00.4: enabling Extended Tags [ 0.314396] pci 0000:02:00.4: PME# supported from D0 D3hot D3cold [ 0.314550] pci 0000:02:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint [ 0.314564] pci 0000:02:00.5: BAR 0 [mem 0xfcd80000-0xfcdbffff] [ 0.314601] pci 0000:02:00.5: enabling Extended Tags [ 0.314654] pci 0000:02:00.5: PME# supported from D0 D3hot D3cold [ 0.314797] pci 0000:02:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint [ 0.314811] pci 0000:02:00.6: BAR 0 [mem 0xfcdc0000-0xfcdc7fff] [ 0.314848] pci 0000:02:00.6: enabling Extended Tags [ 0.314901] pci 0000:02:00.6: PME# supported from D0 D3hot D3cold [ 0.315053] pci 0000:00:08.1: PCI bridge to [bus 02] [ 0.315164] pci 0000:03:00.0: [1022:7901] type 00 class 0x010601 PCIe Endpoint [ 0.315214] pci 0000:03:00.0: BAR 5 [mem 0xfce00000-0xfce007ff] [ 0.315229] pci 0000:03:00.0: enabling Extended Tags [ 0.315298] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.315486] pci 0000:00:08.2: PCI bridge to [bus 03] [ 0.316724] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.316840] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.316946] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.317071] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.317185] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.317277] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.317369] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.317465] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.319102] ACPI: EC: interrupt unblocked [ 0.319104] ACPI: EC: event unblocked [ 0.319108] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.319110] ACPI: EC: GPE=0x3 [ 0.319113] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot ECDT EC initialization complete [ 0.319116] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.319207] iommu: Default domain type: Translated [ 0.319207] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.319535] SCSI subsystem initialized [ 0.319548] libata version 3.00 loaded. [ 0.319548] ACPI: bus type USB registered [ 0.319548] usbcore: registered new interface driver usbfs [ 0.319548] usbcore: registered new interface driver hub [ 0.319548] usbcore: registered new device driver usb [ 0.323859] pps_core: LinuxPPS API ver. 1 registered [ 0.323862] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.323866] PTP clock support registered [ 0.323892] EDAC MC: Ver: 3.0.0 [ 0.323892] efivars: Registered efivars operations [ 0.324735] NetLabel: Initializing [ 0.324738] NetLabel: domain hash size = 128 [ 0.324739] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.324773] NetLabel: unlabeled traffic allowed by default [ 0.324799] mctp: management component transport protocol core [ 0.324799] NET: Registered PF_MCTP protocol family [ 0.324799] PCI: Using ACPI for IRQ routing [ 0.327339] PCI: pci_cache_line_size set to 64 bytes [ 0.327460] e820: reserve RAM buffer [mem 0x09602000-0x0bffffff] [ 0.327463] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.327465] e820: reserve RAM buffer [mem 0x5a2b4018-0x5bffffff] [ 0.327467] e820: reserve RAM buffer [mem 0x5a84b000-0x5bffffff] [ 0.327469] e820: reserve RAM buffer [mem 0x5c336000-0x5fffffff] [ 0.327472] e820: reserve RAM buffer [mem 0x5cf11000-0x5fffffff] [ 0.327474] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff] [ 0.327476] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff] [ 0.327529] pci 0000:02:00.0: vgaarb: setting as boot VGA device [ 0.327529] pci 0000:02:00.0: vgaarb: bridge control possible [ 0.327529] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.327529] vgaarb: loaded [ 0.327549] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.327556] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.330503] clocksource: Switched to clocksource tsc-early [ 0.330753] VFS: Disk quotas dquot_6.6.0 [ 0.330774] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.331011] AppArmor: AppArmor Filesystem Enabled [ 0.331054] pnp: PnP ACPI init [ 0.331156] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.332157] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.332162] system 00:03: [io 0x040b] has been reserved [ 0.332165] system 00:03: [io 0x04d6] has been reserved [ 0.332168] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.332171] system 00:03: [io 0x0c14] has been reserved [ 0.332174] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.332177] system 00:03: [io 0x0c52] has been reserved [ 0.332180] system 00:03: [io 0x0c6c] has been reserved [ 0.332182] system 00:03: [io 0x0c6f] has been reserved [ 0.332185] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.332188] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.332191] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.332194] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.332197] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.332200] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.332202] system 00:03: [io 0x0b00-0x0b0f] has been reserved [ 0.332205] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.332208] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.332211] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.332214] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.332218] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.332221] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.332224] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.332227] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.332230] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.332233] system 00:03: [mem 0xff000000-0xffffffff] has been reserved [ 0.333180] pnp: PnP ACPI: found 4 devices [ 0.340466] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.340573] NET: Registered PF_INET protocol family [ 0.340710] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.362484] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.362520] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.362578] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.362863] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.362993] TCP: Hash tables configured (established 65536 bind 65536) [ 0.363166] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.363207] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.363236] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.363338] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.363349] NET: Registered PF_XDP protocol family [ 0.363364] pci 0000:00:01.2: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.363370] pci 0000:00:01.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.363385] pci 0000:00:01.2: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]: assigned [ 0.363390] pci 0000:00:01.2: bridge window [io 0x1000-0x1fff]: assigned [ 0.363395] pci 0000:00:01.2: PCI bridge to [bus 01] [ 0.363401] pci 0000:00:01.2: bridge window [io 0x1000-0x1fff] [ 0.363411] pci 0000:00:01.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.363419] pci 0000:00:01.2: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.363433] pci 0000:00:08.1: PCI bridge to [bus 02] [ 0.363441] pci 0000:00:08.1: bridge window [io 0xf000-0xffff] [ 0.363446] pci 0000:00:08.1: bridge window [mem 0xfca00000-0xfcdfffff] [ 0.363451] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.363457] pci 0000:00:08.2: PCI bridge to [bus 03] [ 0.363462] pci 0000:00:08.2: bridge window [mem 0xfce00000-0xfcefffff] [ 0.363472] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.363475] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.363478] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.363481] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.363483] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.363486] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfebfffff window] [ 0.363489] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window] [ 0.363492] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.363495] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.363497] pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.363501] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 0.363503] pci_bus 0000:02: resource 1 [mem 0xfca00000-0xfcdfffff] [ 0.363506] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.363509] pci_bus 0000:03: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.363772] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0 [ 0.363790] pci 0000:02:00.3: extending delay after power-on from D3hot to 20 msec [ 0.364145] pci 0000:02:00.4: extending delay after power-on from D3hot to 20 msec [ 0.364267] PCI: CLS 64 bytes, default 64 [ 0.364283] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.364373] pci 0000:00:01.0: Adding to iommu group 0 [ 0.364397] Trying to unpack rootfs image as initramfs... [ 0.364399] pci 0000:00:01.2: Adding to iommu group 1 [ 0.364430] pci 0000:00:08.0: Adding to iommu group 2 [ 0.364453] pci 0000:00:08.1: Adding to iommu group 3 [ 0.364474] pci 0000:00:08.2: Adding to iommu group 4 [ 0.364510] pci 0000:00:14.0: Adding to iommu group 5 [ 0.364529] pci 0000:00:14.3: Adding to iommu group 5 [ 0.364616] pci 0000:00:18.0: Adding to iommu group 6 [ 0.364636] pci 0000:00:18.1: Adding to iommu group 6 [ 0.364655] pci 0000:00:18.2: Adding to iommu group 6 [ 0.364674] pci 0000:00:18.3: Adding to iommu group 6 [ 0.364693] pci 0000:00:18.4: Adding to iommu group 6 [ 0.364712] pci 0000:00:18.5: Adding to iommu group 6 [ 0.364732] pci 0000:00:18.6: Adding to iommu group 6 [ 0.364751] pci 0000:00:18.7: Adding to iommu group 6 [ 0.364776] pci 0000:01:00.0: Adding to iommu group 7 [ 0.364805] pci 0000:02:00.0: Adding to iommu group 8 [ 0.364876] pci 0000:02:00.1: Adding to iommu group 9 [ 0.364907] pci 0000:02:00.2: Adding to iommu group 9 [ 0.364933] pci 0000:02:00.3: Adding to iommu group 9 [ 0.364957] pci 0000:02:00.4: Adding to iommu group 9 [ 0.364983] pci 0000:02:00.5: Adding to iommu group 9 [ 0.365017] pci 0000:02:00.6: Adding to iommu group 9 [ 0.365043] pci 0000:03:00.0: Adding to iommu group 10 [ 0.367169] AMD-Vi: Extended features (0x4f77ef22294ada, 0x0): PPR NX GT IA GA PC GA_vAPIC [ 0.367187] AMD-Vi: Interrupt remapping enabled [ 0.367363] AMD-Vi: Virtual APIC enabled [ 0.367378] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.367380] software IO TLB: mapped [mem 0x00000000562b4000-0x000000005a2b4000] (64MB) [ 0.367495] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.368467] Initialise system trusted keyrings [ 0.368482] Key type blacklist registered [ 0.368545] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.368556] zbud: loaded [ 0.368927] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.369072] fuse: init (API version 7.39) [ 0.369258] integrity: Platform Keyring initialized [ 0.369264] integrity: Machine keyring initialized [ 0.384073] Key type asymmetric registered [ 0.384076] Asymmetric key parser 'x509' registered [ 0.384111] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.384197] io scheduler mq-deadline registered [ 0.387440] pcieport 0000:00:01.2: PME: Signaling with IRQ 26 [ 0.387599] pcieport 0000:00:01.2: AER: enabled with IRQ 26 [ 0.387650] pcieport 0000:00:01.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.388060] pcieport 0000:00:08.1: PME: Signaling with IRQ 27 [ 0.388414] pcieport 0000:00:08.2: PME: Signaling with IRQ 28 [ 0.388502] pcieport 0000:00:08.2: AER: enabled with IRQ 28 [ 0.388662] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.390199] ACPI: AC: AC Adapter [AC0] (on-line) [ 0.390318] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:37/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.390356] ACPI: button: Lid Switch [LID] [ 0.390418] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.390454] ACPI: button: Power Button [PWRB] [ 0.390526] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.390606] ACPI: button: Power Button [PWRF] [ 0.390668] Monitor-Mwait will be used to enter C-1 state [ 0.390676] ACPI: \_PR_.P000: Found 2 idle states [ 0.390847] ACPI: \_PR_.P001: Found 2 idle states [ 0.391080] ACPI: \_PR_.P002: Found 2 idle states [ 0.391204] ACPI: \_PR_.P003: Found 2 idle states [ 0.391331] ACPI: \_PR_.P004: Found 2 idle states [ 0.391521] ACPI: \_PR_.P005: Found 2 idle states [ 0.391728] ACPI: \_PR_.P006: Found 2 idle states [ 0.391926] ACPI: \_PR_.P007: Found 2 idle states [ 0.395158] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.395166] ACPI: thermal: Thermal Zone [THRM] (62 C) [ 0.395742] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.408712] Linux agpgart interface v0.103 [ 0.408829] ACPI: battery: Slot [BAT0] (battery present) [ 0.421461] tpm_crb MSFT0101:00: Disabling hwrng [ 0.430423] loop: module loaded [ 0.430909] ACPI: bus type drm_connector registered [ 0.431468] tun: Universal TUN/TAP device driver, 1.6 [ 0.431577] PPP generic driver version 2.4.2 [ 0.431837] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1 [ 0.431843] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.432761] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.432934] mousedev: PS/2 mouse device common for all mice [ 0.433261] rtc_cmos 00:01: RTC can wake from S4 [ 0.433663] rtc_cmos 00:01: registered as rtc0 [ 0.433720] rtc_cmos 00:01: setting system clock to 2024-09-02T00:06:29 UTC (1725235589) [ 0.433794] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram [ 0.433813] i2c_dev: i2c /dev entries driver [ 0.433926] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.433947] device-mapper: uevent: version 1.0.3 [ 0.434053] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.434102] platform eisa.0: Probing EISA bus 0 [ 0.434108] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.434113] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.434117] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.434121] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.434125] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.434129] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.434133] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.434137] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.434141] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.434145] platform eisa.0: EISA: Detected 0 cards [ 0.434150] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 0.435575] ledtrig-cpu: registered to indicate activity on CPUs [ 0.435940] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.437423] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.437634] fbcon: Deferring console take-over [ 0.437641] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.437848] drop_monitor: Initializing network drop monitor service [ 0.438083] NET: Registered PF_INET6 protocol family [ 0.504229] Freeing initrd memory: 64164K [ 0.515795] Segment Routing with IPv6 [ 0.515830] In-situ OAM (IOAM) with IPv6 [ 0.515896] NET: Registered PF_PACKET protocol family [ 0.515979] Key type dns_resolver registered [ 0.517259] microcode: Current revision: 0x08108109 [ 0.517460] IPI shorthand broadcast: enabled [ 0.521362] sched_clock: Marking stable (520698572, 344431)->(528645024, -7602021) [ 0.521540] registered taskstats version 1 [ 0.522030] Loading compiled-in X.509 certificates [ 0.522799] Loaded X.509 cert 'Build time autogenerated kernel key: d20b288af354b2a30a8094f4881ca576c390e95f' [ 0.523448] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.524080] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.524083] blacklist: Loading compiled-in revocation X.509 certificates [ 0.524118] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.524141] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 0.524164] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 0.524187] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 0.524209] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 0.524232] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 0.524257] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 0.524279] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 0.532774] Key type .fscrypt registered [ 0.532777] Key type fscrypt-provisioning registered [ 0.532855] Key type trusted registered [ 0.556665] Key type encrypted registered [ 0.556677] AppArmor: AppArmor sha256 policy hashing enabled [ 0.556855] integrity: Loading X.509 certificate: UEFI:db [ 0.557361] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' [ 0.557368] integrity: Loading X.509 certificate: UEFI:db [ 0.557755] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' [ 0.557760] integrity: Loading X.509 certificate: UEFI:db [ 0.557818] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.557823] integrity: Loading X.509 certificate: UEFI:db [ 0.557872] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.557876] integrity: Loading X.509 certificate: UEFI:db [ 0.558276] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.561163] Loading compiled-in module X.509 certificates [ 0.561997] Loaded X.509 cert 'Build time autogenerated kernel key: d20b288af354b2a30a8094f4881ca576c390e95f' [ 0.562001] ima: Allocated hash algorithm: sha256 [ 0.595133] ima: No architecture policies found [ 0.595165] evm: Initialising EVM extended attributes: [ 0.595167] evm: security.selinux [ 0.595170] evm: security.SMACK64 [ 0.595172] evm: security.SMACK64EXEC [ 0.595174] evm: security.SMACK64TRANSMUTE [ 0.595176] evm: security.SMACK64MMAP [ 0.595178] evm: security.apparmor [ 0.595180] evm: security.ima [ 0.595182] evm: security.capability [ 0.595184] evm: HMAC attrs: 0x1 [ 0.595686] PM: Magic number: 8:229:101 [ 0.596084] acpi_cpufreq: overriding BIOS provided _PSD data [ 0.616904] RAS: Correctable Errors collector initialized. [ 0.617175] clk: Disabling unused clocks [ 0.622577] Freeing unused decrypted memory: 2028K [ 0.624312] Freeing unused kernel image (initmem) memory: 4972K [ 0.624320] Write protecting the kernel read-only data: 36864k [ 0.625003] Freeing unused kernel image (rodata/data gap) memory: 28K [ 0.699722] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.699738] Run /init as init process [ 0.699740] with arguments: [ 0.699743] /init [ 0.699744] splash [ 0.699746] with environment: [ 0.699748] HOME=/ [ 0.699750] TERM=linux [ 0.699751] BOOT_IMAGE=/boot/vmlinuz-6.8.0-41-generic [ 0.885804] hid: raw HID events driver (C) Jiri Kosina [ 0.888058] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no) [ 0.897482] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/LNXVIDEO:00/input/input4 [ 0.907857] ahci 0000:03:00.0: version 3.0 [ 0.909948] xhci_hcd 0000:02:00.3: xHCI Host Controller [ 0.910270] xhci_hcd 0000:02:00.3: new USB bus registered, assigned bus number 1 [ 0.910517] xhci_hcd 0000:02:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410 [ 0.920316] xhci_hcd 0000:02:00.3: xHCI Host Controller [ 0.920332] xhci_hcd 0000:02:00.3: new USB bus registered, assigned bus number 2 [ 0.920341] xhci_hcd 0000:02:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 0.920856] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 0.920867] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.920872] usb usb1: Product: xHCI Host Controller [ 0.920877] usb usb1: Manufacturer: Linux 6.8.0-41-generic xhci-hcd [ 0.920881] usb usb1: SerialNumber: ... [ 0.925629] hub 1-0:1.0: USB hub found [ 0.925671] hub 1-0:1.0: 4 ports detected [ 0.926427] ahci 0000:03:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 0.926438] ahci 0000:03:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 0.930615] scsi host0: ahci [ 0.930933] scsi host1: ahci [ 0.931019] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.931036] ata1: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 34 lpm-pol 3 [ 0.931042] ata2: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00180 irq 35 lpm-pol 3 [ 0.931093] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 0.931099] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.931103] usb usb2: Product: xHCI Host Controller [ 0.931107] usb usb2: Manufacturer: Linux 6.8.0-41-generic xhci-hcd [ 0.931126] usb usb2: SerialNumber: ... [ 0.931361] hub 2-0:1.0: USB hub found [ 0.931394] hub 2-0:1.0: 4 ports detected [ 0.933660] xhci_hcd 0000:02:00.4: xHCI Host Controller [ 0.933671] xhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 3 [ 0.933874] xhci_hcd 0000:02:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410 [ 0.934348] xhci_hcd 0000:02:00.4: xHCI Host Controller [ 0.934356] xhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 4 [ 0.934362] xhci_hcd 0000:02:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 0.934498] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 0.934502] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.934505] usb usb3: Product: xHCI Host Controller [ 0.934508] usb usb3: Manufacturer: Linux 6.8.0-41-generic xhci-hcd [ 0.934510] usb usb3: SerialNumber: ... [ 0.934697] hub 3-0:1.0: USB hub found [ 0.934718] hub 3-0:1.0: 2 ports detected [ 0.935355] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.935411] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 0.935415] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.935417] usb usb4: Product: xHCI Host Controller [ 0.935420] usb usb4: Manufacturer: Linux 6.8.0-41-generic xhci-hcd [ 0.935423] usb usb4: SerialNumber: ... [ 0.935587] hub 4-0:1.0: USB hub found [ 0.935606] hub 4-0:1.0: 1 port detected [ 1.164355] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.172356] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.301780] usb 3-1: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 1.301789] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.301793] usb 3-1: Product: USB2.0-CRW [ 1.301796] usb 3-1: Manufacturer: Generic [ 1.301800] usb 3-1: SerialNumber: ... [ 1.315864] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07 [ 1.315881] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.315889] usb 1-3: Product: USB Receiver [ 1.315896] usb 1-3: Manufacturer: Logitech [ 1.386407] tsc: Refined TSC clocksource calibration: 2097.880 MHz [ 1.386417] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.386431] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e3d5ddb1ee, max_idle_ns: 440795273542 ns [ 1.386656] clocksource: Switched to clocksource tsc [ 1.386675] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.387232] ata2.00: ATA-10: TOSHIBA MQ04ABF100, JU0C0J, max UDMA/100 [ 1.387376] ata1.00: ATA-11: SanDisk SD9SN8W128G1102, X6106002, max UDMA/133 [ 1.387540] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.387772] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.388901] ata2.00: configured for UDMA/100 [ 1.390092] ata1.00: Features: Dev-Sleep [ 1.393859] ata1.00: configured for UDMA/133 [ 1.404498] scsi 0:0:0:0: Direct-Access ATA SanDisk SD9SN8W1 6002 PQ: 0 ANSI: 5 [ 1.405318] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.405467] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.405518] sd 0:0:0:0: [sda] Write Protect is off [ 1.405529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.405582] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.405646] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.405734] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ04ABF1 0J PQ: 0 ANSI: 5 [ 1.406550] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.406567] sd 1:0:0:0: [sdb] Drive-managed SMR disk [ 1.406578] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.406584] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.406611] sd 1:0:0:0: [sdb] Write Protect is off [ 1.406616] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.406658] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.406713] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 1.408616] sda: sda1 sda2 [ 1.409001] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.458874] sdb: sdb1 [ 1.459236] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.467231] input: ELAN1300:00 04F3:3087 Mouse as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1300:00/0018:04F3:3087.0001/input/input5 [ 1.467378] usb 3-2: new high-speed USB device number 3 using xhci_hcd [ 1.467784] input: ELAN1300:00 04F3:3087 Touchpad as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1300:00/0018:04F3:3087.0001/input/input6 [ 1.468881] hid-generic 0018:04F3:3087.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3087] on i2c-ELAN1300:00 [ 1.481794] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:02:00.3/usb1/1-3/1-3:1.0/0003:046D:C52B.0002/input/input7 [ 1.547599] hid-generic 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:02:00.3-3/input0 [ 1.553316] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:02:00.3/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input8 [ 1.569786] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:02:00.3/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input9 [ 1.579977] i2c_hid_acpi i2c-ELAN1300:00: device returned incorrect report (2 vs 14 expected) [ 1.579988] hid-multitouch 0018:04F3:3087.0001: failed to fetch feature 14 [ 1.580127] input: ELAN1300:00 04F3:3087 Mouse as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1300:00/0018:04F3:3087.0001/input/input12 [ 1.595199] usb 3-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37 [ 1.595205] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.595209] usb 3-2: Product: USB2.0 Hub [ 1.621574] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:02:00.3/usb1/1-3/1-3:1.1/0003:046D:C52B.0003/input/input10 [ 1.621780] input: ELAN1300:00 04F3:3087 Touchpad as /devices/platform/AMDI0010:01/i2c-0/i2c-ELAN1300:00/0018:04F3:3087.0001/input/input13 [ 1.622031] hid-generic 0003:046D:C52B.0003: input,hiddev0,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:00.3-3/input1 [ 1.622118] hid-multitouch 0018:04F3:3087.0001: input,hidraw2: I2C HID v1.00 Mouse [ELAN1300:00 04F3:3087] on i2c-ELAN1300:00 [ 1.627417] hid-generic 0003:046D:C52B.0004: hiddev1,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.3-3/input2 [ 1.627550] usbcore: registered new interface driver usbhid [ 1.627557] usbhid: USB HID core driver [ 1.639982] hub 3-2:1.0: USB hub found [ 1.640278] hub 3-2:1.0: 4 ports detected [ 1.663682] usbcore: registered new interface driver rtsx_usb [ 1.718494] logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.3-3/input2 [ 1.827964] input: Logitech Wireless Device PID:1028 Mouse as /devices/pci0000:00/0000:00:08.1/0000:02:00.3/usb1/1-3/1-3:1.2/0003:046D:C52B.0004/0003:046D:1028.0005/input/input14 [ 1.828474] hid-generic 0003:046D:1028.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:1028] on usb-0000:02:00.3-3/input2:1 [ 1.867118] input: Logitech M570 as /devices/pci0000:00/0000:00:08.1/0000:02:00.3/usb1/1-3/1-3:1.2/0003:046D:C52B.0004/0003:046D:1028.0005/input/input18 [ 1.867428] logitech-hidpp-device 0003:046D:1028.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:02:00.3-3/input2:1 [ 1.916374] usb 3-2.1: new full-speed USB device number 4 using xhci_hcd [ 2.011936] usb 3-2.1: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10 [ 2.011950] usb 3-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.082359] clocksource: timekeeping watchdog on CPU3: Marking clocksource 'tsc' as unstable because the skew is too large: [ 2.082366] clocksource: 'hpet' wd_nsec: 496422659 wd_now: 1b84899 wd_last: 14bd37c mask: ffffffff [ 2.082370] clocksource: 'tsc' cs_nsec: 495992454 cs_now: 4b9b23491 cs_last: 47baceff8 mask: ffffffffffffffff [ 2.082373] clocksource: Clocksource 'tsc' skewed -430205 ns (0 ms) over watchdog 'hpet' interval of 496422659 ns (496 ms) [ 2.082377] clocksource: 'tsc' is current clocksource. [ 2.082384] tsc: Marking TSC unstable due to clocksource watchdog [ 2.082394] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 2.082396] sched_clock: Marking unstable (2082049099, 344406)<-(2089995509, -7602021) [ 2.082573] clocksource: Checking clocksource tsc synchronization from CPU 1 to CPUs 0,4,6-7. [ 2.082643] clocksource: Switched to clocksource hpet [ 2.125387] usb 3-2.2: new high-speed USB device number 5 using xhci_hcd [ 2.160154] EXT4-fs (sda2): mounted filesystem HASH_665-B01C-40A0-FA46-4E70180F7A69 ro with ordered data mode. Quota mode: none. [ 2.229567] usb 3-2.2: New USB device found, idVendor=13d3, idProduct=56dc, bcdDevice=18.52 [ 2.229582] usb 3-2.2: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.229589] usb 3-2.2: Product: USB2.0 HD UVC WebCam [ 2.229594] usb 3-2.2: Manufacturer: Azurewave [ 2.229600] usb 3-2.2: SerialNumber: ... [ 2.317542] systemd[1]: Inserted module 'autofs4' [ 2.345024] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 2.345047] systemd[1]: Detected architecture x86-64. [ 2.345371] usb 3-2.3: new full-speed USB device number 6 using xhci_hcd [ 2.347288] systemd[1]: Hostname set to ... [ 2.451828] usb 3-2.3: New USB device found, idVendor=04f3, idProduct=0903, bcdDevice= 1.42 [ 2.451842] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.451849] usb 3-2.3: Product: ELAN:Fingerprint [ 2.451855] usb 3-2.3: Manufacturer: ELAN [ 2.453224] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 2.559991] systemd[1]: Queued start job for default target graphical.target. [ 2.577111] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 2.577769] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 2.578197] systemd[1]: Created slice user.slice - User and Session Slice. [ 2.578321] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 2.578619] systemd[1]: Set up automount ... [ 2.578659] systemd[1]: Expecting device dev-disk-by\x2duuid-....device - /dev/disk/by-uuid/06CA-A677... [ 2.578685] systemd[1]: Expecting device dev-sdb1.device - /dev/sdb1... [ 2.578729] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 2.578787] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 2.578815] systemd[1]: Reached target slices.target - Slice Units. [ 2.578846] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. [ 2.578899] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 2.579170] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 2.579326] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 2.579495] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 2.579664] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 2.579864] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 2.580131] systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket. [ 2.580197] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.580430] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 2.580586] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 2.582038] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 2.583131] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 2.584386] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 2.585522] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 2.588910] systemd[1]: Starting systemd-journald.service - Journal Service... [ 2.590976] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 2.592499] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 2.593923] systemd[1]: Starting XXX@XXX - Load Kernel Module configfs... [ 2.595500] systemd[1]: Starting XXX@XXX - Load Kernel Module dm_mod... [ 2.597182] systemd[1]: Starting XXX@XXX - Load Kernel Module drm... [ 2.602613] systemd[1]: Starting XXX@XXX - Load Kernel Module efi_pstore... [ 2.604162] systemd[1]: Starting XXX@XXX - Load Kernel Module fuse... [ 2.605841] systemd[1]: Starting XXX@XXX - Load Kernel Module loop... [ 2.606021] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 2.608665] pstore: Using crash dump compression: deflate [ 2.608966] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 2.609022] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.611024] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 2.611122] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.612884] pstore: Registered efi_pstore as persistent store backend [ 2.613910] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 2.616669] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 2.616920] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 2.617138] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 2.617337] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 2.617950] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 2.618621] systemd[1]: XXX@XXX: Deactivated successfully. [ 2.618984] systemd[1]: Finished XXX@XXX - Load Kernel Module configfs. [ 2.619518] systemd[1]: XXX@XXX: Deactivated successfully. [ 2.619845] systemd[1]: Finished XXX@XXX - Load Kernel Module dm_mod. [ 2.620364] systemd[1]: XXX@XXX: Deactivated successfully. [ 2.620678] systemd[1]: Finished XXX@XXX - Load Kernel Module drm. [ 2.621196] systemd[1]: XXX@XXX: Deactivated successfully. [ 2.621567] systemd[1]: Finished XXX@XXX - Load Kernel Module efi_pstore. [ 2.622013] systemd-journald[325]: Collecting audit messages is disabled. [ 2.622117] systemd[1]: XXX@XXX: Deactivated successfully. [ 2.622685] systemd[1]: Finished XXX@XXX - Load Kernel Module fuse. [ 2.623231] systemd[1]: XXX@XXX: Deactivated successfully. [ 2.623560] systemd[1]: Finished XXX@XXX - Load Kernel Module loop. [ 2.625563] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 2.626904] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 2.627017] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 2.628805] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully... [ 2.635699] lp: driver loaded but no devices found [ 2.635904] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 2.636139] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 2.640761] ppdev: user-space parallel port driver [ 2.642431] EXT4-fs (sda2): re-mounted HASH_665-B01C-40A0-FA46-4E70180F7A69 r/w. Quota mode: none. [ 2.644564] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 2.646315] systemd[1]: Activating swap swap.img.swap - /swap.img... [ 2.646978] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 2.647052] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 2.648737] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed... [ 2.648779] systemd[1]: systemd-tpm2-setup.service - TPM2 SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 2.658071] Adding 4194300k swap on /swap.img. Priority:-2 extents:33 across:108920832k SS [ 2.658136] systemd[1]: Finished systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully. [ 2.658444] systemd[1]: Activated swap swap.img.swap - /swap.img. [ 2.658592] systemd[1]: Reached target swap.target - Swaps. [ 2.658703] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 2.660360] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 2.666542] systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed. [ 2.670575] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 2.672420] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 2.678708] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ 2.680599] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... [ 2.683523] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 2.683774] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ 2.686153] systemd[1]: Mounting snap-bare-5.mount - Mount unit for bare, revision 5... [ 2.688027] systemd[1]: Mounting snap-core-17200.mount - Mount unit for core, revision 17200... [ 2.689870] systemd[1]: Mounting snap-core20-2318.mount - Mount unit for core20, revision 2318... [ 2.695376] systemd[1]: Mounting snap-core22-1564.mount - Mount unit for core22, revision 1564... [ 2.696940] loop0: detected capacity change from 0 to 213384 [ 2.697598] loop1: detected capacity change from 0 to 8 [ 2.697851] systemd[1]: Mounting snap-firefox-4793.mount - Mount unit for firefox, revision 4793... [ 2.698739] loop2: detected capacity change from 0 to 130960 [ 2.700700] systemd[1]: Mounting snap-firmware\x2dupdater-127.mount - Mount unit for firmware-updater, revision 127... [ 2.702030] loop3: detected capacity change from 0 to 152112 [ 2.702680] systemd[1]: Mounting snap-gimp-436.mount - Mount unit for gimp, revision 436... [ 2.705672] systemd[1]: Mounting snap-gnome\x2d3\x2d38\x2d2004-143.mount - Mount unit for gnome-3-38-2004, revision 143... [ 2.707604] loop4: detected capacity change from 0 to 552488 [ 2.708264] systemd[1]: Mounting snap-gnome\x2d42\x2d2204-176.mount - Mount unit for gnome-42-2204, revision 176... [ 2.710132] loop5: detected capacity change from 0 to 21952 [ 2.713661] systemd[1]: Mounting snap-gtk2\x2dcommon\x2dthemes-13.mount - Mount unit for gtk2-common-themes, revision 13... [ 2.713916] loop6: detected capacity change from 0 to 716176 [ 2.714036] loop7: detected capacity change from 0 to 1056096 [ 2.716176] systemd[1]: Mounting snap-gtk\x2dcommon\x2dthemes-1535.mount - Mount unit for gtk-common-themes, revision 1535... [ 2.718701] systemd[1]: Mounting snap-snap\x2dstore-1173.mount - Mount unit for snap-store, revision 1173... [ 2.719240] loop8: detected capacity change from 0 to 1034424 [ 2.720908] loop9: detected capacity change from 0 to 280 [ 2.721268] systemd[1]: Mounting snap-snapd-21759.mount - Mount unit for snapd, revision 21759... [ 2.724211] systemd[1]: Mounting snap-snapd\x2ddesktop\x2dintegration-178.mount - Mount unit for snapd-desktop-integration, revision 178... [ 2.727873] systemd[1]: Mounting snap-thunderbird-507.mount - Mount unit for thunderbird, revision 507... [ 2.728950] loop11: detected capacity change from 0 to 21584 [ 2.729211] loop10: detected capacity change from 0 to 187776 [ 2.732097] loop12: detected capacity change from 0 to 79520 [ 2.735427] loop13: detected capacity change from 0 to 1000 [ 2.736213] loop14: detected capacity change from 0 to 306448 [ 2.745360] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.802808] systemd-journald[325]: Received client request to flush runtime journal. [ 2.821476] systemd-journald[325]: /var/log/journal/75f8b486dca14a4b871684c025069058/system.journal: Journal file uses a different sequence number ID, rotating. [ 2.821492] systemd-journald[325]: Rotating system journal. [ 3.030475] ccp 0000:02:00.2: enabling device (0000 -> 0002) [ 3.036214] ccp 0000:02:00.2: ccp enabled [ 3.037369] ccp 0000:02:00.2: tee enabled [ 3.037481] ccp 0000:02:00.2: psp enabled [ 3.037867] snd_pci_acp3x 0000:02:00.5: enabling device (0000 -> 0002) [ 3.038054] snd_pci_acp3x 0000:02:00.5: ACP audio mode : 2 [ 3.114433] mc: Linux media interface: v0.10 [ 3.115782] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 3.115790] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 3.117321] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 3.117331] RAPL PMU: hw unit of domain package 2^-16 Joules [ 3.122910] cryptd: max_cpu_qlen set to 1000 [ 3.125650] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 3.129134] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.129524] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.129822] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.142824] asus_wmi: ASUS WMI generic driver loaded [ 3.142859] videodev: Linux video capture interface: v2.00 [ 3.152071] asus_wmi: Initialization: 0x1 [ 3.152242] asus_wmi: BIOS WMI version: 9.0 [ 3.152989] asus_wmi: SFUN value: 0x21 [ 3.153003] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS [ 3.153009] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue [ 3.160822] AVX2 version of gcm_enc/dec engaged. [ 3.170181] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input19 [ 3.176223] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19 [ 3.176957] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19 [ 3.177544] asus_wmi: fan_curve_get_factory_default (0x00110032) failed: -19 [ 3.191910] ACPI: battery: new extension: ASUS Battery Extension [ 3.203603] AES CTR mode by8 optimization enabled [ 3.231688] Bluetooth: Core ver 2.22 [ 3.232109] NET: Registered PF_BLUETOOTH protocol family [ 3.232114] Bluetooth: HCI device and connection manager initialized [ 3.232122] Bluetooth: HCI socket layer initialized [ 3.232126] Bluetooth: L2CAP socket layer initialized [ 3.232137] Bluetooth: SCO socket layer initialized [ 3.236563] Intel(R) Wireless WiFi driver for Linux [ 3.236787] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 3.239438] iwlwifi 0000:01:00.0: Detected crf-id 0xbadcafe, cnv-id 0x10 wfpm id 0x80000000 [ 3.239546] iwlwifi 0000:01:00.0: PCI dev 24fd/0110, rev=0x230, rfid=0xd55555d5 [ 3.249427] iwlwifi 0000:01:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm [ 3.267388] usb 3-2.2: Found UVC 1.50 device USB2.0 HD UVC WebCam (13d3:56dc) [ 3.281910] usbcore: registered new interface driver uvcvideo [ 3.297197] usbcore: registered new interface driver btusb [ 3.303089] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [ 3.315078] Bluetooth: hci0: Reading supported features failed (-16) [ 3.315092] Bluetooth: hci0: Error reading debug features [ 3.315097] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 3.498126] kvm_amd: TSC scaling supported [ 3.498137] kvm_amd: Nested Virtualization enabled [ 3.498140] kvm_amd: Nested Paging enabled [ 3.498145] kvm_amd: SEV enabled (ASIDs 0 - 15) [ 3.498148] kvm_amd: SEV-ES enabled (ASIDs 0 - 4294967295) [ 3.498167] snd_hda_intel 0000:02:00.1: enabling device (0000 -> 0002) [ 3.498180] kvm_amd: Virtual VMLOAD VMSAVE supported [ 3.498183] kvm_amd: Virtual GIF supported [ 3.498185] kvm_amd: LBR virtualization supported [ 3.498400] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client [ 3.498834] snd_hda_intel 0000:02:00.6: enabling device (0000 -> 0002) [ 3.537385] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 3.537791] thermal thermal_zone1: failed to read out thermal zone (-61) [ 3.547768] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 3.547780] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.547785] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 3.547790] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 3.547793] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 3.547797] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ 3.547801] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 3.550337] MCE: In-kernel MCE decoding enabled. [ 3.552729] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:02:00.1/sound/card0/input20 [ 3.621309] iwlwifi 0000:01:00.0: base HW address: XXX, OTP minor version: 0x4 [ 3.696773] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 3.707441] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 3.711988] EXT4-fs (sdb1): mounted filesystem HASH_9E5-C1A5-96C5-9118-CDDD7724FBD6 r/w with ordered data mode. Quota mode: none. [ 6.537851] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:02:00.6/sound/card1/input21 [ 6.555121] intel_rapl_common: Found RAPL domain package [ 6.555131] intel_rapl_common: Found RAPL domain core [ 6.560005] [drm] amdgpu kernel modesetting enabled. [ 6.591258] amdgpu: Virtual CRAT table created for CPU [ 6.591318] amdgpu: Topology: Add CPU node [ 6.591870] amdgpu 0000:02:00.0: enabling device (0006 -> 0007) [ 6.592002] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1043:0x1821 0xC2). [ 6.592388] [drm] register mmio base: 0xFCD00000 [ 6.592393] [drm] register mmio size: 524288 [ 6.593157] [drm] add ip block number 0 <soc15_common> [ 6.593165] [drm] add ip block number 1 <gmc_v9_0> [ 6.593168] [drm] add ip block number 2 <vega10_ih> [ 6.593172] [drm] add ip block number 3 <psp> [ 6.593175] [drm] add ip block number 4 <powerplay> [ 6.593179] [drm] add ip block number 5 <dm> [ 6.593183] [drm] add ip block number 6 <gfx_v9_0> [ 6.593186] [drm] add ip block number 7 <sdma_v4_0> [ 6.593189] [drm] add ip block number 8 <vcn_v1_0> [ 6.599129] amdgpu 0000:02:00.0: amdgpu: Fetched VBIOS from VFCT [ 6.599150] amdgpu: ATOM BIOS: 113-PICASSO-117 [ 6.612873] [drm] VCN decode is enabled in VM mode [ 6.612889] [drm] VCN encode is enabled in VM mode [ 6.612891] [drm] JPEG decode is enabled in VM mode [ 6.633828] amdgpu 0000:02:00.0: vgaarb: deactivate vga console [ 6.633840] amdgpu 0000:02:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled [ 6.633899] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 6.633922] amdgpu 0000:02:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 6.633928] amdgpu 0000:02:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 6.633943] [drm] Detected VRAM RAM=2048M, BAR=2048M [ 6.633946] [drm] RAM width 128bits DDR4 [ 6.636290] [drm] amdgpu: 2048M of VRAM memory ready [ 6.636301] [drm] amdgpu: 2934M of GTT memory ready. [ 6.636432] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 6.636717] [drm] PCIE GART of 1024M enabled. [ 6.636721] [drm] PTB located at 0x000000F400A00000 [ 6.638414] amdgpu: hwmgr_sw_init smu backed is smu10_smu [ 6.640239] [drm] Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0 [ 6.640262] amdgpu 0000:02:00.0: amdgpu: Will use PSP to load VCN firmware [ 6.662222] [drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR [ 6.740171] amdgpu 0000:02:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 6.749596] amdgpu 0000:02:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 6.755180] [drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [ 6.755308] [drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4) [ 6.755314] amdgpu 0000:02:00.0: amdgpu: Secure display: Generic Failure. [ 6.755323] amdgpu 0000:02:00.0: amdgpu: SECUREDISPLAY: query securedisplay TA failed. ret 0x0 [ 6.756253] [drm] DM_PPLIB: values for F clock [ 6.756258] [drm] DM_PPLIB: 400000 in kHz, 3024 in mV [ 6.756263] [drm] DM_PPLIB: 933000 in kHz, 3299 in mV [ 6.756268] [drm] DM_PPLIB: 1067000 in kHz, 3924 in mV [ 6.756272] [drm] DM_PPLIB: 1200000 in kHz, 4074 in mV [ 6.756277] [drm] DM_PPLIB: values for DCF clock [ 6.756281] [drm] DM_PPLIB: 300000 in kHz, 3024 in mV [ 6.756285] [drm] DM_PPLIB: 600000 in kHz, 3299 in mV [ 6.756288] [drm] DM_PPLIB: 626000 in kHz, 3924 in mV [ 6.756292] [drm] DM_PPLIB: 654000 in kHz, 4074 in mV [ 6.756631] [drm] Display Core v3.2.266 initialized on DCN 1.0 [ 6.770345] snd_hda_intel 0000:02:00.1: bound 0000:02:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 6.851468] [drm] kiq ring mec 2 pipe 1 q 0 [ 6.866219] [drm] VCN decode and encode initialized successfully(under SPG Mode). [ 6.895985] amdgpu: HMM registered 2048MB device memory [ 6.899605] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 6.899647] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1 [ 6.899873] amdgpu: Virtual CRAT table created for GPU [ 6.900011] amdgpu: Topology: Add dGPU node [0x15d8:0x1002] [ 6.900016] kfd kfd: amdgpu: added device 1002:15d8 [ 6.900039] amdgpu 0000:02:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8 [ 6.900050] amdgpu 0000:02:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 6.900054] amdgpu 0000:02:00.0: amdgpu: ring gfx_low uses VM inv eng 1 on hub 0 [ 6.900058] amdgpu 0000:02:00.0: amdgpu: ring gfx_high uses VM inv eng 4 on hub 0 [ 6.900062] amdgpu 0000:02:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 5 on hub 0 [ 6.900066] amdgpu 0000:02:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 6 on hub 0 [ 6.900069] amdgpu 0000:02:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 7 on hub 0 [ 6.900073] amdgpu 0000:02:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 8 on hub 0 [ 6.900077] amdgpu 0000:02:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 9 on hub 0 [ 6.900081] amdgpu 0000:02:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 10 on hub 0 [ 6.900085] amdgpu 0000:02:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 11 on hub 0 [ 6.900089] amdgpu 0000:02:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 12 on hub 0 [ 6.900092] amdgpu 0000:02:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 13 on hub 0 [ 6.900096] amdgpu 0000:02:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [ 6.900100] amdgpu 0000:02:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [ 6.900103] amdgpu 0000:02:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [ 6.900106] amdgpu 0000:02:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [ 6.900110] amdgpu 0000:02:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [ 6.915648] amdgpu: pp_dpm_get_sclk_od was not implemented. [ 6.915663] amdgpu: pp_dpm_get_mclk_od was not implemented. [ 6.917250] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:02:00.0 on minor 1 [ 6.933102] fbcon: amdgpudrmfb (fb0) is primary device [ 6.933108] fbcon: Deferring console take-over [ 6.933115] amdgpu 0000:02:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 6.977649] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.977659] Bluetooth: BNEP filters: protocol multicast [ 6.977667] Bluetooth: BNEP socket layer initialized [ 6.984111] Bluetooth: MGMT ver 1.22 [ 6.990937] NET: Registered PF_ALG protocol family [ 7.278729] NET: Registered PF_QIPCRTR protocol family [ 7.289934] loop15: detected capacity change from 0 to 8 [ 8.272281] iwlwifi 0000:01:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 9.168692] Bluetooth: RFCOMM TTY layer initialized [ 9.168704] Bluetooth: RFCOMM socket layer initialized [ 9.168714] Bluetooth: RFCOMM ver 1.11 [ 10.791582] rfkill: input handler disabled [ 11.555241] wlp1s0: authenticate with XXX (local address=XXX) [ 11.556537] wlp1s0: send auth to XXX (try 1/3) [ 11.562271] wlp1s0: authenticated [ 11.563384] wlp1s0: associate with XXX (try 1/3) [ 11.566380] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [ 11.568678] wlp1s0: associated [ 11.635229] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [ 23.956975] systemd-journald[325]: /var/log/journal/75f8b486dca14a4b871684c025069058/user-XXXX.journal: Journal file uses a different sequence number ID, rotating. [ 24.372820] rfkill: input handler enabled [ 25.924466] rfkill: input handler disabled [ 38.859310] logitech-hidpp-device 0003:046D:1028.0005: HID++ 1.0 device connected. [ 337.718434] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [31990.474240] wlp1s0: Connection to AP XXX lost [32008.362448] wlp1s0: authenticate with XXX (local address=XXX) [32008.363892] wlp1s0: send auth to XXX (try 1/3) [32008.369665] wlp1s0: authenticated [32008.370384] wlp1s0: associate with XXX (try 1/3) [32008.373328] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32008.376657] wlp1s0: associated [32008.892465] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32014.948067] wlp1s0: Connection to AP XXX lost [32016.010100] wlp1s0: authenticate with XXX (local address=XXX) [32016.011543] wlp1s0: send auth to XXX (try 1/3) [32016.016164] wlp1s0: authenticated [32016.017401] wlp1s0: associate with XXX (try 1/3) [32016.020398] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32016.023652] wlp1s0: associated [32016.366895] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32029.488578] wlp1s0: Connection to AP XXX lost [32030.559263] wlp1s0: authenticate with XXX (local address=XXX) [32030.560652] wlp1s0: send auth to XXX (try 1/3) [32030.566084] wlp1s0: authenticated [32030.567394] wlp1s0: associate with XXX (try 1/3) [32030.570504] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32030.573967] wlp1s0: associated [32030.703116] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32045.975748] wlp1s0: Connection to AP XXX lost [32047.044425] wlp1s0: authenticate with XXX (local address=XXX) [32047.045791] wlp1s0: send auth to XXX (try 1/3) [32047.049660] wlp1s0: authenticated [32047.050408] wlp1s0: associate with XXX (try 1/3) [32047.053532] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32047.057102] wlp1s0: associated [32047.906479] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32052.222204] wlp1s0: Connection to AP XXX lost [32053.284156] wlp1s0: authenticate with XXX (local address=XXX) [32053.285573] wlp1s0: send auth to XXX (try 1/3) [32053.288882] wlp1s0: authenticated [32053.289398] wlp1s0: associate with XXX (try 1/3) [32053.292518] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32053.295937] wlp1s0: associated [32054.255543] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32058.161651] wlp1s0: Connection to AP XXX lost [32060.864418] wlp1s0: authenticate with XXX (local address=XXX) [32060.865796] wlp1s0: send auth to XXX (try 1/3) [32060.870110] wlp1s0: authenticated [32060.871393] wlp1s0: associate with XXX (try 1/3) [32060.874427] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32060.877940] wlp1s0: associated [32062.038438] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32063.728598] wlp1s0: Connection to AP XXX lost [32070.656492] wlp1s0: authenticate with XXX (local address=XXX) [32070.657897] wlp1s0: send auth to XXX (try 1/3) [32070.662753] wlp1s0: authenticated [32070.663385] wlp1s0: associate with XXX (try 1/3) [32070.666555] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32070.669907] wlp1s0: associated [32071.049237] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32087.755687] wlp1s0: Connection to AP XXX lost [32088.848664] wlp1s0: authenticate with XXX (local address=XXX) [32088.850047] wlp1s0: send auth to XXX (try 1/3) [32088.854555] wlp1s0: authenticated [32088.855402] wlp1s0: associate with XXX (try 1/3) [32088.858436] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32088.862910] wlp1s0: associated [32088.968940] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32119.602597] wlp1s0: Connection to AP XXX lost [32120.670522] wlp1s0: authenticate with XXX (local address=XXX) [32120.671859] wlp1s0: send auth to XXX (try 1/3) [32120.679817] wlp1s0: authenticated [32120.680383] wlp1s0: associate with XXX (try 1/3) [32120.683367] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32120.687013] wlp1s0: associated [32121.022064] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32131.890807] wlp1s0: Connection to AP XXX lost [32140.435002] wlp1s0: authenticate with XXX (local address=XXX) [32140.436433] wlp1s0: send auth to XXX (try 1/3) [32140.440145] wlp1s0: authenticated [32140.441399] wlp1s0: associate with XXX (try 1/3) [32140.444419] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32140.447873] wlp1s0: associated [32140.990016] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32152.268670] wlp1s0: Connection to AP XXX lost [32160.192591] wlp1s0: authenticate with XXX (local address=XXX) [32160.193936] wlp1s0: send auth to XXX (try 1/3) [32160.197895] wlp1s0: authenticated [32160.198543] wlp1s0: associate with XXX (try 1/3) [32160.201569] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32160.205020] wlp1s0: associated [32160.856110] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32162.545232] wlp1s0: Connection to AP XXX lost [32171.059633] wlp1s0: authenticate with XXX (local address=XXX) [32171.060929] wlp1s0: send auth to XXX (try 1/3) [32171.063867] wlp1s0: authenticated [32171.065375] wlp1s0: associate with XXX (try 1/3) [32171.069249] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32171.072688] wlp1s0: associated [32171.094884] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32174.276907] wlp1s0: Connection to AP XXX lost [32187.641971] wlp1s0: authenticate with XXX (local address=XXX) [32187.643329] wlp1s0: send auth to XXX (try 1/3) [32187.647928] wlp1s0: authenticated [32187.650418] wlp1s0: associate with XXX (try 1/3) [32187.653547] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32187.664734] wlp1s0: associated [32187.683153] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32217.805660] wlp1s0: Connection to AP XXX lost [32218.814790] wlp1s0: authenticate with XXX (local address=XXX) [32218.816235] wlp1s0: send auth to XXX (try 1/3) [32218.824467] wlp1s0: authenticated [32218.825389] wlp1s0: associate with XXX (try 1/3) [32218.828812] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32218.831842] wlp1s0: associated [32219.531225] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32221.901174] wlp1s0: Connection to AP XXX lost [32230.435184] wlp1s0: authenticate with XXX (local address=XXX) [32230.436604] wlp1s0: send auth to XXX (try 1/3) [32230.440427] wlp1s0: authenticated [32230.441475] wlp1s0: associate with XXX (try 1/3) [32230.444510] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32230.448602] wlp1s0: associated [32230.795887] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32232.693612] wlp1s0: Connection to AP XXX lost [32233.721842] wlp1s0: authenticate with XXX (local address=XXX) [32233.723256] wlp1s0: send auth to XXX (try 1/3) [32233.727137] wlp1s0: authenticated [32233.728392] wlp1s0: associate with XXX (try 1/3) [32233.731476] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32233.735759] wlp1s0: associated [32235.098620] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32237.403108] wlp1s0: Connection to AP XXX lost [32238.441292] wlp1s0: authenticate with XXX (local address=XXX) [32238.442645] wlp1s0: send auth to XXX (try 1/3) [32238.447800] wlp1s0: authenticated [32238.448400] wlp1s0: associate with XXX (try 1/3) [32238.451449] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32238.455659] wlp1s0: associated [32240.168344] wlp1s0: Connection to AP XXX lost [32242.830854] wlp1s0: authenticate with XXX (local address=XXX) [32242.832220] wlp1s0: send auth to XXX (try 1/3) [32242.837048] wlp1s0: authenticated [32242.838423] wlp1s0: associate with XXX (try 1/3) [32242.841580] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32242.845717] wlp1s0: associated [32244.415906] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32246.415333] wlp1s0: Connection to AP XXX lost [32247.439264] wlp1s0: authenticate with XXX (local address=XXX) [32247.440731] wlp1s0: send auth to XXX (try 1/3) [32247.443814] wlp1s0: authenticated [32247.444394] wlp1s0: associate with XXX (try 1/3) [32247.447452] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32247.459385] wlp1s0: associated [32247.492662] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32249.179528] wlp1s0: Connection to AP XXX lost [32250.232734] wlp1s0: authenticate with XXX (local address=XXX) [32250.234120] wlp1s0: send auth to XXX (try 1/3) [32250.238903] wlp1s0: authenticated [32250.239398] wlp1s0: associate with XXX (try 1/3) [32250.242487] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32250.246548] wlp1s0: associated [32251.944912] wlp1s0: Connection to AP XXX lost [32252.970683] wlp1s0: authenticate with XXX (local address=XXX) [32252.972070] wlp1s0: send auth to XXX (try 1/3) [32252.976434] wlp1s0: authenticated [32252.977385] wlp1s0: associate with XXX (try 1/3) [32252.980418] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32252.984602] wlp1s0: associated [32253.015572] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32256.914719] wlp1s0: Connection to AP XXX lost [32266.171514] wlp1s0: authenticate with XXX (local address=XXX) [32266.172868] wlp1s0: send auth to XXX (try 1/3) [32266.178108] wlp1s0: authenticated [32266.178377] wlp1s0: associate with XXX (try 1/3) [32266.181335] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32266.192898] wlp1s0: associated [32266.841160] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32268.691235] wlp1s0: Connection to AP XXX lost [32269.741927] wlp1s0: authenticate with XXX (local address=XXX) [32269.743283] wlp1s0: send auth to XXX (try 1/3) [32269.748997] wlp1s0: authenticated [32269.749388] wlp1s0: associate with XXX (try 1/3) [32269.752398] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32269.762941] wlp1s0: associated [32270.424664] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32275.558911] wlp1s0: Connection to AP XXX lost [32276.707449] wlp1s0: authenticate with XXX (local address=XXX) [32276.708853] wlp1s0: send auth to XXX (try 1/3) [32276.713999] wlp1s0: authenticated [32276.715403] wlp1s0: associate with XXX (try 1/3) [32276.718489] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32276.730255] wlp1s0: associated [32278.105135] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32281.286661] wlp1s0: Connection to AP XXX lost [32284.021145] wlp1s0: authenticate with XXX (local address=XXX) [32284.022566] wlp1s0: send auth to XXX (try 1/3) [32284.027468] wlp1s0: authenticated [32284.029402] wlp1s0: associate with XXX (try 1/3) [32284.032491] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32284.036959] wlp1s0: associated [32284.556446] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32286.249071] wlp1s0: Connection to AP XXX lost [32293.294522] wlp1s0: authenticate with XXX (local address=XXX) [32293.295876] wlp1s0: send auth to XXX (try 1/3) [32293.301251] wlp1s0: authenticated [32293.302377] wlp1s0: associate with XXX (try 1/3) [32293.305399] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32293.316455] wlp1s0: associated [32295.015413] wlp1s0: Connection to AP XXX lost [32296.094212] wlp1s0: authenticate with XXX (local address=XXX) [32296.095614] wlp1s0: send auth to XXX (try 1/3) [32296.101136] wlp1s0: authenticated [32296.102387] wlp1s0: associate with XXX (try 1/3) [32296.105495] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32296.109457] wlp1s0: associated [32297.254239] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32299.663628] wlp1s0: Connection to AP XXX lost [32309.338130] wlp1s0: authenticate with XXX (local address=XXX) [32309.339481] wlp1s0: send auth to XXX (try 1/3) [32309.345541] wlp1s0: authenticated [32309.346383] wlp1s0: associate with XXX (try 1/3) [32309.349448] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32309.353386] wlp1s0: associated [32309.952866] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32311.643759] wlp1s0: Connection to AP XXX lost [32312.711303] wlp1s0: authenticate with XXX (local address=XXX) [32312.712685] wlp1s0: send auth to XXX (try 1/3) [32312.717651] wlp1s0: authenticated [32312.718423] wlp1s0: associate with XXX (try 1/3) [32312.721973] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32312.725827] wlp1s0: associated [32313.126222] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32553.681947] wlp1s0: Connection to AP XXX lost [32560.742576] wlp1s0: authenticate with XXX (local address=XXX) [32560.743962] wlp1s0: send auth to XXX (try 1/3) [32560.752461] wlp1s0: authenticated [32560.753398] wlp1s0: associate with XXX (try 1/3) [32560.756619] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32560.760211] wlp1s0: associated [32561.143438] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32566.482167] wlp1s0: Connection to AP XXX lost [32575.136379] wlp1s0: authenticate with XXX (local address=XXX) [32575.137713] wlp1s0: send auth to XXX (try 1/3) [32575.141850] wlp1s0: authenticated [32575.143413] wlp1s0: associate with XXX (try 1/3) [32575.146573] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32575.150465] wlp1s0: associated [32576.401269] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32581.535635] wlp1s0: Connection to AP XXX lost [32582.616105] wlp1s0: authenticate with XXX (local address=XXX) [32582.617560] wlp1s0: send auth to XXX (try 1/3) [32582.622515] wlp1s0: authenticated [32582.623403] wlp1s0: associate with XXX (try 1/3) [32582.626499] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32582.630103] wlp1s0: associated [32582.646104] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32585.623902] wlp1s0: Connection to AP XXX lost [32586.868041] wlp1s0: authenticate with XXX (local address=XXX) [32586.869421] wlp1s0: send auth to XXX (try 1/3) [32586.875073] wlp1s0: authenticated [32586.876400] wlp1s0: associate with XXX (try 1/3) [32586.879535] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32586.891383] wlp1s0: associated [32587.152885] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32591.563539] wlp1s0: Connection to AP XXX lost [32598.671630] wlp1s0: authenticate with XXX (local address=XXX) [32598.673032] wlp1s0: send auth to XXX (try 1/3) [32598.678244] wlp1s0: authenticated [32598.679407] wlp1s0: associate with XXX (try 1/3) [32598.682480] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32598.686108] wlp1s0: associated [32598.929159] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32602.835313] wlp1s0: Connection to AP XXX lost [32605.562147] wlp1s0: authenticate with XXX (local address=XXX) [32605.563528] wlp1s0: send auth to XXX (try 1/3) [32605.569043] wlp1s0: authenticated [32605.570418] wlp1s0: associate with XXX (try 1/3) [32605.573467] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32605.591697] wlp1s0: associated [32605.591993] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32608.774978] wlp1s0: Connection to AP XXX lost [32609.889551] wlp1s0: authenticate with XXX (local address=XXX) [32609.890930] wlp1s0: send auth to XXX (try 1/3) [32609.895466] wlp1s0: authenticated [32609.896483] wlp1s0: associate with XXX (try 1/3) [32609.899673] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32609.903840] wlp1s0: associated [32611.012449] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32614.438566] wlp1s0: Connection to AP XXX lost [32615.507566] wlp1s0: authenticate with XXX (local address=XXX) [32615.509008] wlp1s0: send auth to XXX (try 1/3) [32615.513771] wlp1s0: authenticated [32615.514403] wlp1s0: associate with XXX (try 1/3) [32615.517491] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32615.521076] wlp1s0: associated [32615.621588] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32618.502720] wlp1s0: Connection to AP XXX lost [32627.081003] wlp1s0: authenticate with XXX (local address=XXX) [32627.082442] wlp1s0: send auth to XXX (try 1/3) [32627.088431] wlp1s0: authenticated [32627.089406] wlp1s0: associate with XXX (try 1/3) [32627.092468] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32627.104604] wlp1s0: associated [32627.294866] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32636.012789] wlp1s0: Connection to AP XXX lost [32649.791519] wlp1s0: authenticate with XXX (local address=XXX) [32649.792927] wlp1s0: send auth to XXX (try 1/3) [32649.799565] wlp1s0: authenticated [32649.800396] wlp1s0: associate with XXX (try 1/3) [32649.803695] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32649.808032] wlp1s0: associated [32650.028570] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32653.760392] wlp1s0: Connection to AP XXX lost [32656.451397] wlp1s0: authenticate with XXX (local address=XXX) [32656.452792] wlp1s0: send auth to XXX (try 1/3) [32656.458099] wlp1s0: authenticated [32656.459416] wlp1s0: associate with XXX (try 1/3) [32656.463072] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32656.466699] wlp1s0: associated [32658.165238] wlp1s0: Connection to AP XXX lost [32659.246289] wlp1s0: authenticate with XXX (local address=XXX) [32659.247775] wlp1s0: send auth to XXX (try 1/3) [32659.252467] wlp1s0: authenticated [32659.253405] wlp1s0: associate with XXX (try 1/3) [32659.256471] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32659.260029] wlp1s0: associated [32660.927891] wlp1s0: Connection to AP XXX lost [32662.012098] wlp1s0: authenticate with XXX (local address=XXX) [32662.013416] wlp1s0: send auth to XXX (try 1/3) [32662.018333] wlp1s0: authenticated [32662.019404] wlp1s0: associate with XXX (try 1/3) [32662.022477] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32662.026051] wlp1s0: associated [32662.110747] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [32664.378638] wlp1s0: Connection to AP XXX lost [32665.460408] wlp1s0: authenticate with XXX (local address=XXX) [32665.461851] wlp1s0: send auth to XXX (try 1/3) [32665.465261] wlp1s0: authenticated [32665.466386] wlp1s0: associate with XXX (try 1/3) [32665.469368] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32665.473270] wlp1s0: associated [32667.174340] wlp1s0: Connection to AP XXX lost [32668.241992] wlp1s0: authenticate with XXX (local address=XXX) [32668.243345] wlp1s0: send auth to XXX (try 1/3) [32668.247762] wlp1s0: authenticated [32668.248437] wlp1s0: associate with XXX (try 1/3) [32668.251452] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=8) [32668.255378] wlp1s0: associated [32668.562303] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [39313.467081] loop15: detected capacity change from 0 to 152112 [42991.081741] wlp1s0: Connection to AP XXX lost [42993.869645] wlp1s0: authenticate with XXX (local address=XXX) [42993.871016] wlp1s0: send auth to XXX (try 1/3) [42993.879292] wlp1s0: authenticated [42993.880401] wlp1s0: associate with XXX (try 1/3) [42993.883476] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [42993.885988] wlp1s0: associated [42993.938682] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44204.763340] wlp1s0: Connection to AP XXX lost [44205.915388] wlp1s0: authenticate with XXX (local address=XXX) [44205.916747] wlp1s0: send auth to XXX (try 1/3) [44205.926111] wlp1s0: authenticated [44205.928376] wlp1s0: associate with XXX (try 1/3) [44205.931344] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44205.933953] wlp1s0: associated [44207.629471] wlp1s0: Connection to AP XXX lost [44210.411385] wlp1s0: authenticate with XXX (local address=XXX) [44210.412778] wlp1s0: send auth to XXX (try 1/3) [44210.417453] wlp1s0: authenticated [44210.418386] wlp1s0: associate with XXX (try 1/3) [44210.421384] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44210.432048] wlp1s0: associated [44210.790221] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44217.051514] wlp1s0: Connection to AP XXX lost [44224.273515] wlp1s0: authenticate with XXX (local address=XXX) [44224.274922] wlp1s0: send auth to XXX (try 1/3) [44224.280153] wlp1s0: authenticated [44224.281409] wlp1s0: associate with XXX (try 1/3) [44224.284572] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44224.290886] wlp1s0: associated [44226.021805] wlp1s0: Connection to AP XXX lost [44240.645018] wlp1s0: authenticate with XXX (local address=XXX) [44240.646412] wlp1s0: send auth to XXX (try 1/3) [44240.652122] wlp1s0: authenticated [44240.653410] wlp1s0: associate with XXX (try 1/3) [44240.656446] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44240.667065] wlp1s0: associated [44241.920568] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44256.374102] wlp1s0: Connection to AP XXX lost [44257.487553] wlp1s0: authenticate with XXX (local address=XXX) [44257.488897] wlp1s0: send auth to XXX (try 1/3) [44257.490835] wlp1s0: authenticated [44257.491397] wlp1s0: associate with XXX (try 1/3) [44257.494439] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44257.497489] wlp1s0: associated [44257.690732] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44264.259098] wlp1s0: Connection to AP XXX lost [44265.347223] wlp1s0: authenticate with XXX (local address=XXX) [44265.348627] wlp1s0: send auth to XXX (try 1/3) [44265.354580] wlp1s0: authenticated [44265.355397] wlp1s0: associate with XXX (try 1/3) [44265.358397] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44265.361331] wlp1s0: associated [44266.804417] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44274.396929] wlp1s0: Connection to AP XXX lost [44275.553073] wlp1s0: authenticate with XXX (local address=XXX) [44275.554424] wlp1s0: send auth to XXX (try 1/3) [44275.560011] wlp1s0: authenticated [44275.561433] wlp1s0: associate with XXX (try 1/3) [44275.564450] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44275.567250] wlp1s0: associated [44276.736869] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44295.389635] wlp1s0: Connection to AP XXX lost [44296.484022] wlp1s0: authenticate with XXX (local address=XXX) [44296.485394] wlp1s0: send auth to XXX (try 1/3) [44296.495577] wlp1s0: authenticated [44296.496400] wlp1s0: associate with XXX (try 1/3) [44296.499676] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44296.502727] wlp1s0: associated [44296.602799] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44300.099312] wlp1s0: Connection to AP XXX lost [44302.839151] wlp1s0: authenticate with XXX (local address=XXX) [44302.840589] wlp1s0: send auth to XXX (try 1/3) [44302.842637] wlp1s0: authenticated [44302.843389] wlp1s0: associate with XXX (try 1/3) [44302.846450] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44302.849450] wlp1s0: associated [44303.669161] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44305.383712] wlp1s0: Connection to AP XXX lost [44318.565089] wlp1s0: authenticate with XXX (local address=XXX) [44318.566444] wlp1s0: send auth to XXX (try 1/3) [44318.569905] wlp1s0: authenticated [44318.570390] wlp1s0: associate with XXX (try 1/3) [44318.573326] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44318.576470] wlp1s0: associated [44318.618629] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44321.255073] wlp1s0: Connection to AP XXX lost [44329.963752] wlp1s0: authenticate with XXX (local address=XXX) [44329.965159] wlp1s0: send auth to XXX (try 1/3) [44329.970345] wlp1s0: authenticated [44329.973410] wlp1s0: associate with XXX (try 1/3) [44329.976548] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44329.979445] wlp1s0: associated [44329.985279] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44331.700046] wlp1s0: Connection to AP XXX lost [44338.771771] wlp1s0: authenticate with XXX (local address=XXX) [44338.773144] wlp1s0: send auth to XXX (try 1/3) [44338.777995] wlp1s0: authenticated [44338.781389] wlp1s0: associate with XXX (try 1/3) [44338.784370] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44338.803440] wlp1s0: associated [44340.023024] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44352.427601] wlp1s0: Connection to AP XXX lost [44353.638748] wlp1s0: authenticate with XXX (local address=XXX) [44353.640114] wlp1s0: send auth to XXX (try 1/3) [44353.645337] wlp1s0: authenticated [44353.646418] wlp1s0: associate with XXX (try 1/3) [44353.649586] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44353.652594] wlp1s0: associated [44353.948920] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44488.417708] wlp1s0: Connection to AP XXX lost [44497.173439] wlp1s0: authenticate with XXX (local address=XXX) [44497.174779] wlp1s0: send auth to XXX (try 1/3) [44497.184076] wlp1s0: authenticated [44497.185388] wlp1s0: associate with XXX (try 1/3) [44497.188364] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44497.191763] wlp1s0: associated [44498.541152] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44501.414984] wlp1s0: Connection to AP XXX lost [44517.738627] wlp1s0: authenticate with XXX (local address=XXX) [44517.739932] wlp1s0: send auth to XXX (try 1/3) [44517.741736] wlp1s0: authenticated [44517.742378] wlp1s0: associate with XXX (try 1/3) [44517.745363] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44517.748681] wlp1s0: associated [44518.202635] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [44519.913702] wlp1s0: Connection to AP XXX lost [44521.023711] wlp1s0: authenticate with XXX (local address=XXX) [44521.025119] wlp1s0: send auth to XXX (try 1/3) [44521.030225] wlp1s0: authenticated [44521.031395] wlp1s0: associate with XXX (try 1/3) [44521.034391] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [44521.045245] wlp1s0: associated [44521.068141] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [45065.041818] wlp1s0: Connection to AP XXX lost [45066.322334] wlp1s0: authenticate with XXX (local address=XXX) [45066.323656] wlp1s0: send auth to XXX (try 1/3) [45066.333487] wlp1s0: authenticated [45066.335409] wlp1s0: associate with XXX (try 1/3) [45066.338441] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [45066.342303] wlp1s0: associated [45066.664780] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [85090.727039] perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [86993.627461] perf: interrupt took too long (3164 > 3138), lowering kernel.perf_event_max_sample_rate to 63000 [96609.805683] perf: interrupt took too long (3956 > 3955), lowering kernel.perf_event_max_sample_rate to 50000 [122441.954925] perf: interrupt took too long (4950 > 4945), lowering kernel.perf_event_max_sample_rate to 40000 [168014.242903] perf: interrupt took too long (6188 > 6187), lowering kernel.perf_event_max_sample_rate to 32000 [185856.693122] wlp1s0: Connection to AP XXX lost [185870.438301] wlp1s0: authenticate with XXX (local address=XXX) [185870.439669] wlp1s0: send auth to XXX (try 1/3) [185870.449175] wlp1s0: authenticated [185870.450390] wlp1s0: associate with XXX (try 1/3) [185870.453409] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [185870.456415] wlp1s0: associated [185870.914332] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [185902.981643] wlp1s0: Connection to AP XXX lost [185911.839779] wlp1s0: authenticate with XXX (local address=XXX) [185911.841181] wlp1s0: send auth to XXX (try 1/3) [185911.850040] wlp1s0: authenticated [185911.851394] wlp1s0: associate with XXX (try 1/3) [185911.854396] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [185911.857939] wlp1s0: associated [185911.978238] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [185921.619331] wlp1s0: Connection to AP XXX lost [185929.482144] wlp1s0: authenticate with XXX (local address=XXX) [185929.483529] wlp1s0: send auth to XXX (try 1/3) [185929.489691] wlp1s0: authenticated [185929.490394] wlp1s0: associate with XXX (try 1/3) [185929.493420] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [185929.504213] wlp1s0: associated [185929.796756] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [185980.094844] wlp1s0: Connection to AP XXX lost [185981.318556] wlp1s0: authenticate with XXX (local address=XXX) [185981.319873] wlp1s0: send auth to XXX (try 1/3) [185981.326729] wlp1s0: authenticated [185981.327381] wlp1s0: associate with XXX (try 1/3) [185981.330449] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [185981.341123] wlp1s0: associated [185981.411327] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [185994.943670] wlp1s0: Connection to AP XXX lost [185996.045027] wlp1s0: authenticate with XXX (local address=XXX) [185996.046345] wlp1s0: send auth to XXX (try 1/3) [185996.049954] wlp1s0: authenticated [185996.051395] wlp1s0: associate with XXX (try 1/3) [185996.054501] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [185996.057772] wlp1s0: associated [185996.976554] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186029.659635] wlp1s0: Connection to AP XXX lost [186032.358277] wlp1s0: authenticate with XXX (local address=XXX) [186032.359642] wlp1s0: send auth to XXX (try 1/3) [186032.367293] wlp1s0: authenticated [186032.368393] wlp1s0: associate with XXX (try 1/3) [186032.371475] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [186032.374477] wlp1s0: associated [186033.025718] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186054.134456] wlp1s0: Connection to AP XXX lost [186055.186376] wlp1s0: authenticate with XXX (local address=XXX) [186055.187723] wlp1s0: send auth to XXX (try 1/3) [186055.197045] wlp1s0: authenticated [186055.198412] wlp1s0: associate with XXX (try 1/3) [186055.201474] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=5) [186055.204107] wlp1s0: associated [186055.450153] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186538.510197] wlp1s0: Connection to AP XXX lost [186545.559802] wlp1s0: authenticate with XXX (local address=XXX) [186545.561174] wlp1s0: send auth to XXX (try 1/3) [186545.570175] wlp1s0: authenticated [186545.572381] wlp1s0: associate with XXX (try 1/3) [186545.575375] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186545.578578] wlp1s0: associated [186547.199829] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186555.713150] wlp1s0: Connection to AP XXX lost [186564.456224] wlp1s0: authenticate with XXX (local address=XXX) [186564.457614] wlp1s0: send auth to XXX (try 1/3) [186564.463143] wlp1s0: authenticated [186564.465417] wlp1s0: associate with XXX (try 1/3) [186564.468438] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186564.471684] wlp1s0: associated [186564.812748] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186566.531066] wlp1s0: Connection to AP XXX lost [186567.784569] wlp1s0: authenticate with XXX (local address=XXX) [186567.785950] wlp1s0: send auth to XXX (try 1/3) [186567.788180] wlp1s0: authenticated [186567.789385] wlp1s0: associate with XXX (try 1/3) [186567.792364] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186567.795818] wlp1s0: associated [186568.501215] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186573.224253] wlp1s0: Connection to AP XXX lost [186580.377252] wlp1s0: authenticate with XXX (local address=XXX) [186580.378665] wlp1s0: send auth to XXX (try 1/3) [186580.384074] wlp1s0: authenticated [186580.386414] wlp1s0: associate with XXX (try 1/3) [186580.390286] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186580.393799] wlp1s0: associated [186581.402174] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186589.711698] wlp1s0: Connection to AP XXX lost [186605.761286] wlp1s0: authenticate with XXX (local address=XXX) [186605.762709] wlp1s0: send auth to XXX (try 1/3) [186605.768770] wlp1s0: authenticated [186605.769384] wlp1s0: associate with XXX (try 1/3) [186605.773320] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186605.777995] wlp1s0: associated [186606.900523] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186615.414431] wlp1s0: Connection to AP XXX lost [186616.672577] wlp1s0: authenticate with XXX (local address=XXX) [186616.673959] wlp1s0: send auth to XXX (try 1/3) [186616.675709] wlp1s0: authenticated [186616.676392] wlp1s0: associate with XXX (try 1/3) [186616.679328] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186616.682627] wlp1s0: associated [186617.141099] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186623.607342] wlp1s0: Connection to AP XXX lost [186626.338265] wlp1s0: authenticate with XXX (local address=XXX) [186626.339648] wlp1s0: send auth to XXX (try 1/3) [186626.345043] wlp1s0: authenticated [186626.348403] wlp1s0: associate with XXX (try 1/3) [186626.351366] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186626.355133] wlp1s0: associated [186626.356075] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186628.514557] wlp1s0: Connection to AP XXX lost [186629.772466] wlp1s0: authenticate with XXX (local address=XXX) [186629.773792] wlp1s0: send auth to XXX (try 1/3) [186629.782710] wlp1s0: authenticated [186629.783390] wlp1s0: associate with XXX (try 1/3) [186629.786305] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186629.789821] wlp1s0: associated [186630.760370] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186632.477699] wlp1s0: Connection to AP XXX lost [186633.634375] wlp1s0: authenticate with XXX (local address=XXX) [186633.635741] wlp1s0: send auth to XXX (try 1/3) [186633.640950] wlp1s0: authenticated [186633.643396] wlp1s0: associate with XXX (try 1/3) [186633.646335] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186633.649651] wlp1s0: associated [186634.959311] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186638.250968] wlp1s0: Connection to AP XXX lost [186645.528037] wlp1s0: authenticate with XXX (local address=XXX) [186645.529427] wlp1s0: send auth to XXX (try 1/3) [186645.535125] wlp1s0: authenticated [186645.537391] wlp1s0: associate with XXX (try 1/3) [186645.540382] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186645.551392] wlp1s0: associated [186645.710714] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186652.177880] wlp1s0: Connection to AP XXX lost [186654.909993] wlp1s0: authenticate with XXX (local address=XXX) [186654.911376] wlp1s0: send auth to XXX (try 1/3) [186654.917122] wlp1s0: authenticated [186654.919405] wlp1s0: associate with XXX (try 1/3) [186654.922360] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186654.926857] wlp1s0: associated [186654.926915] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186659.038203] wlp1s0: Connection to AP XXX lost [186666.427247] wlp1s0: authenticate with XXX (local address=XXX) [186666.428645] wlp1s0: send auth to XXX (try 1/3) [186666.434117] wlp1s0: authenticated [186666.437403] wlp1s0: associate with XXX (try 1/3) [186666.440919] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186666.444329] wlp1s0: associated [186667.523612] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [186673.375323] wlp1s0: Connection to AP XXX lost [186680.608571] wlp1s0: authenticate with XXX (local address=XXX) [186680.609891] wlp1s0: send auth to XXX (try 1/3) [186680.615037] wlp1s0: authenticated [186680.618390] wlp1s0: associate with XXX (try 1/3) [186680.621401] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186680.624667] wlp1s0: associated [186682.347639] wlp1s0: Connection to AP XXX lost [186691.174554] wlp1s0: authenticate with XXX (local address=XXX) [186691.175888] wlp1s0: send auth to XXX (try 1/3) [186691.181085] wlp1s0: authenticated [186691.185403] wlp1s0: associate with XXX (try 1/3) [186691.188371] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [186691.191766] wlp1s0: associated [186691.485717] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [192652.886906] wlp1s0: Connection to AP XXX lost [192654.417534] wlp1s0: authenticate with XXX (local address=XXX) [192654.418953] wlp1s0: send auth to XXX (try 1/3) [192654.425831] wlp1s0: authenticated [192654.426388] wlp1s0: associate with XXX (try 1/3) [192654.429378] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [192654.432045] wlp1s0: associated [192654.509543] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199243.840951] wlp1s0: Connection to AP XXX lost [199260.333411] wlp1s0: authenticate with XXX (local address=XXX) [199260.334767] wlp1s0: send auth to XXX (try 1/3) [199260.341130] wlp1s0: authenticated [199260.342396] wlp1s0: associate with XXX (try 1/3) [199260.345420] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199260.348700] wlp1s0: associated [199261.028604] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199262.735504] wlp1s0: Connection to AP XXX lost [199263.971966] wlp1s0: authenticate with XXX (local address=XXX) [199263.973375] wlp1s0: send auth to XXX (try 1/3) [199263.978511] wlp1s0: authenticated [199263.979381] wlp1s0: associate with XXX (try 1/3) [199263.982695] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199263.985831] wlp1s0: associated [199264.305369] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199270.873627] wlp1s0: Connection to AP XXX lost [199286.611541] wlp1s0: authenticate with XXX (local address=XXX) [199286.612896] wlp1s0: send auth to XXX (try 1/3) [199286.619173] wlp1s0: authenticated [199286.620389] wlp1s0: associate with XXX (try 1/3) [199286.623511] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199286.626627] wlp1s0: associated [199287.139210] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199296.984129] wlp1s0: Connection to AP XXX lost [199304.534566] wlp1s0: authenticate with XXX (local address=XXX) [199304.535937] wlp1s0: send auth to XXX (try 1/3) [199304.541009] wlp1s0: authenticated [199304.542407] wlp1s0: associate with XXX (try 1/3) [199304.545510] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199304.548785] wlp1s0: associated [199304.648699] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199306.355249] wlp1s0: Connection to AP XXX lost [199307.536991] wlp1s0: authenticate with XXX (local address=XXX) [199307.538447] wlp1s0: send auth to XXX (try 1/3) [199307.543513] wlp1s0: authenticated [199307.544410] wlp1s0: associate with XXX (try 1/3) [199307.547421] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199307.550598] wlp1s0: associated [199309.222264] wlp1s0: Connection to AP XXX lost [199311.882469] wlp1s0: authenticate with XXX (local address=XXX) [199311.883797] wlp1s0: send auth to XXX (try 1/3) [199311.887929] wlp1s0: authenticated [199311.888405] wlp1s0: associate with XXX (try 1/3) [199311.891446] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199311.894987] wlp1s0: associated [199311.917794] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199313.625110] wlp1s0: Connection to AP XXX lost [199314.822572] wlp1s0: authenticate with XXX (local address=XXX) [199314.823982] wlp1s0: send auth to XXX (try 1/3) [199314.828389] wlp1s0: authenticated [199314.829403] wlp1s0: associate with XXX (try 1/3) [199314.832519] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199314.835761] wlp1s0: associated [199316.526202] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199318.745491] wlp1s0: Connection to AP XXX lost [199320.019393] wlp1s0: authenticate with XXX (local address=XXX) [199320.020839] wlp1s0: send auth to XXX (try 1/3) [199320.023929] wlp1s0: authenticated [199320.025382] wlp1s0: associate with XXX (try 1/3) [199320.028374] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199320.031907] wlp1s0: associated [199320.724569] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199327.292468] wlp1s0: Connection to AP XXX lost [199342.762488] wlp1s0: authenticate with XXX (local address=XXX) [199342.763847] wlp1s0: send auth to XXX (try 1/3) [199342.773294] wlp1s0: authenticated [199342.774389] wlp1s0: associate with XXX (try 1/3) [199342.777323] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199342.788421] wlp1s0: associated [199344.071281] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199347.209449] wlp1s0: Connection to AP XXX lost [199354.741159] wlp1s0: authenticate with XXX (local address=XXX) [199354.742541] wlp1s0: send auth to XXX (try 1/3) [199354.748202] wlp1s0: authenticated [199354.749381] wlp1s0: associate with XXX (try 1/3) [199354.752473] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199354.755684] wlp1s0: associated [199354.924320] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199372.756501] wlp1s0: Connection to AP XXX lost [199375.475277] wlp1s0: authenticate with XXX (local address=XXX) [199375.476719] wlp1s0: send auth to XXX (try 1/3) [199375.486427] wlp1s0: authenticated [199375.487382] wlp1s0: associate with XXX (try 1/3) [199375.490750] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199375.493931] wlp1s0: associated [199376.737462] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199384.122491] wlp1s0: Connection to AP XXX lost [199386.304316] wlp1s0: authenticate with XXX (local address=XXX) [199386.305699] wlp1s0: send auth to XXX (try 1/3) [199386.309487] wlp1s0: authenticated [199386.310415] wlp1s0: associate with XXX (try 1/3) [199386.313366] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199386.316573] wlp1s0: associated [199387.998702] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199392.211767] wlp1s0: Connection to AP XXX lost [199393.418586] wlp1s0: authenticate with XXX (local address=XXX) [199393.419924] wlp1s0: send auth to XXX (try 1/3) [199393.424195] wlp1s0: authenticated [199393.426378] wlp1s0: associate with XXX (try 1/3) [199393.430291] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199393.434043] wlp1s0: associated [199394.347130] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199402.041581] wlp1s0: Connection to AP XXX lost [199403.144623] wlp1s0: authenticate with XXX (local address=XXX) [199403.145993] wlp1s0: send auth to XXX (try 1/3) [199403.151689] wlp1s0: authenticated [199403.152398] wlp1s0: associate with XXX (try 1/3) [199403.155399] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199403.166484] wlp1s0: associated [199403.255060] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199411.461398] wlp1s0: Connection to AP XXX lost [199414.162007] wlp1s0: authenticate with XXX (local address=XXX) [199414.163384] wlp1s0: send auth to XXX (try 1/3) [199414.167568] wlp1s0: authenticated [199414.168398] wlp1s0: associate with XXX (try 1/3) [199414.171894] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199414.175440] wlp1s0: associated [199414.416977] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199417.802313] wlp1s0: Connection to AP XXX lost [199419.081205] wlp1s0: authenticate with XXX (local address=XXX) [199419.082582] wlp1s0: send auth to XXX (try 1/3) [199419.087540] wlp1s0: authenticated [199419.088385] wlp1s0: associate with XXX (try 1/3) [199419.091383] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199419.094631] wlp1s0: associated [199419.126079] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199425.592689] wlp1s0: Connection to AP XXX lost [199439.315039] wlp1s0: authenticate with XXX (local address=XXX) [199439.316426] wlp1s0: send auth to XXX (try 1/3) [199439.325687] wlp1s0: authenticated [199439.326380] wlp1s0: associate with XXX (try 1/3) [199439.329392] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199439.340440] wlp1s0: associated [199439.503054] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199491.945434] wlp1s0: Connection to AP XXX lost [199494.654112] wlp1s0: authenticate with XXX (local address=XXX) [199494.655461] wlp1s0: send auth to XXX (try 1/3) [199494.663749] wlp1s0: authenticated [199494.664390] wlp1s0: associate with XXX (try 1/3) [199494.667325] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199494.670707] wlp1s0: associated [199494.900834] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199498.600513] wlp1s0: Connection to AP XXX lost [199512.421548] wlp1s0: authenticate with XXX (local address=XXX) [199512.423085] wlp1s0: send auth to XXX (try 1/3) [199512.427320] wlp1s0: authenticated [199512.428392] wlp1s0: associate with XXX (try 1/3) [199512.431375] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199512.443296] wlp1s0: associated [199514.114189] wlp1s0: Connection to AP XXX lost [199522.763810] wlp1s0: authenticate with XXX (local address=XXX) [199522.765242] wlp1s0: send auth to XXX (try 1/3) [199522.770046] wlp1s0: authenticated [199522.771400] wlp1s0: associate with XXX (try 1/3) [199522.774472] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199522.778063] wlp1s0: associated [199523.058612] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199524.763236] wlp1s0: Connection to AP XXX lost [199532.090338] wlp1s0: authenticate with XXX (local address=XXX) [199532.091712] wlp1s0: send auth to XXX (try 1/3) [199532.097131] wlp1s0: authenticated [199532.098407] wlp1s0: associate with XXX (try 1/3) [199532.101442] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199532.104729] wlp1s0: associated [199532.684339] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199535.515397] wlp1s0: Connection to AP XXX lost [199542.701340] wlp1s0: authenticate with XXX (local address=XXX) [199542.702783] wlp1s0: send auth to XXX (try 1/3) [199542.706063] wlp1s0: authenticated [199542.707389] wlp1s0: associate with XXX (try 1/3) [199542.710449] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199542.719414] wlp1s0: associated [199544.423279] wlp1s0: Connection to AP XXX lost [199547.139219] wlp1s0: authenticate with XXX (local address=XXX) [199547.140599] wlp1s0: send auth to XXX (try 1/3) [199547.146120] wlp1s0: authenticated [199547.148406] wlp1s0: associate with XXX (try 1/3) [199547.151434] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199547.154843] wlp1s0: associated [199547.940873] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199913.311155] wlp1s0: Connection to AP XXX lost [199920.502485] wlp1s0: authenticate with XXX (local address=XXX) [199920.503873] wlp1s0: send auth to XXX (try 1/3) [199920.511676] wlp1s0: authenticated [199920.512400] wlp1s0: associate with XXX (try 1/3) [199920.518752] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199920.522584] wlp1s0: associated [199920.874182] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199922.573427] wlp1s0: Connection to AP XXX lost [199923.790708] wlp1s0: authenticate with XXX (local address=XXX) [199923.792125] wlp1s0: send auth to XXX (try 1/3) [199923.794879] wlp1s0: authenticated [199923.795398] wlp1s0: associate with XXX (try 1/3) [199923.798366] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199923.809771] wlp1s0: associated [199925.480992] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199928.001009] wlp1s0: Connection to AP XXX lost [199930.648259] wlp1s0: authenticate with XXX (local address=XXX) [199930.649714] wlp1s0: send auth to XXX (try 1/3) [199930.652377] wlp1s0: authenticated [199930.653386] wlp1s0: associate with XXX (try 1/3) [199930.656334] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199930.660118] wlp1s0: associated [199931.318878] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199933.018556] wlp1s0: Connection to AP XXX lost [199934.101219] wlp1s0: authenticate with XXX (local address=XXX) [199934.102605] wlp1s0: send auth to XXX (try 1/3) [199934.107763] wlp1s0: authenticated [199934.109402] wlp1s0: associate with XXX (try 1/3) [199934.112436] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199934.124019] wlp1s0: associated [199935.209672] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [199936.909672] wlp1s0: Connection to AP XXX lost [199944.948236] wlp1s0: authenticate with XXX (local address=XXX) [199944.949645] wlp1s0: send auth to XXX (try 1/3) [199944.953934] wlp1s0: authenticated [199944.954400] wlp1s0: associate with XXX (try 1/3) [199944.957374] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=2) [199944.969599] wlp1s0: associated [199945.039556] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [213267.093950] wlp1s0: Connection to AP XXX lost [213268.583165] wlp1s0: authenticate with XXX (local address=XXX) [213268.584616] wlp1s0: send auth to XXX (try 1/3) [213268.591403] wlp1s0: authenticated [213268.593390] wlp1s0: associate with XXX (try 1/3) [213268.597056] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [213268.607898] wlp1s0: associated [213268.613975] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [213295.663468] wlp1s0: Connection to AP XXX lost [213310.833724] wlp1s0: authenticate with XXX (local address=XXX) [213310.835019] wlp1s0: send auth to XXX (try 1/3) [213310.841963] wlp1s0: authenticated [213310.842386] wlp1s0: associate with XXX (try 1/3) [213310.845458] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [213310.848950] wlp1s0: associated [213311.008894] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [213330.583060] wlp1s0: Connection to AP XXX lost [213331.781021] wlp1s0: authenticate with XXX (local address=XXX) [213331.782422] wlp1s0: send auth to XXX (try 1/3) [213331.792064] wlp1s0: authenticated [213331.793401] wlp1s0: associate with XXX (try 1/3) [213331.796321] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [213331.799690] wlp1s0: associated [213331.899846] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [213339.901642] wlp1s0: Connection to AP XXX lost [213347.129303] wlp1s0: authenticate with XXX (local address=XXX) [213347.130707] wlp1s0: send auth to XXX (try 1/3) [213347.136170] wlp1s0: authenticated [213347.138393] wlp1s0: associate with XXX (try 1/3) [213347.141542] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [213347.144786] wlp1s0: associated [213347.464040] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [213357.616866] wlp1s0: Connection to AP XXX lost [213366.480048] wlp1s0: authenticate with XXX (local address=XXX) [213366.481492] wlp1s0: send auth to XXX (try 1/3) [213366.486995] wlp1s0: authenticated [213366.487400] wlp1s0: associate with XXX (try 1/3) [213366.490445] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [213366.493921] wlp1s0: associated [213367.432911] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [213371.952757] wlp1s0: Connection to AP XXX lost [213373.230555] wlp1s0: authenticate with XXX (local address=XXX) [213373.231838] wlp1s0: send auth to XXX (try 1/3) [213373.234013] wlp1s0: authenticated [213373.234387] wlp1s0: associate with XXX (try 1/3) [213373.237284] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [213373.239776] wlp1s0: associated [213373.882994] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [213377.891538] wlp1s0: Connection to AP XXX lost [213378.998580] wlp1s0: authenticate with XXX (local address=XXX) [213378.999951] wlp1s0: send auth to XXX (try 1/3) [213379.002702] wlp1s0: authenticated [213379.003393] wlp1s0: associate with XXX (try 1/3) [213379.006319] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [213379.009902] wlp1s0: associated [213379.209715] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [213489.514505] wlp1s0: Connection to AP XXX lost [213490.805029] wlp1s0: authenticate with XXX (local address=XXX) [213490.806462] wlp1s0: send auth to XXX (try 1/3) [213490.813313] wlp1s0: authenticated [213490.814377] wlp1s0: associate with XXX (try 1/3) [213490.817301] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [213490.823694] wlp1s0: associated [213490.933222] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [296742.351322] loop16: detected capacity change from 0 to 555496 [315999.267656] perf: interrupt took too long (7758 > 7735), lowering kernel.perf_event_max_sample_rate to 25000 [327312.906930] loop17: detected capacity change from 0 to 152112 [371246.632019] wlp1s0: Connection to AP XXX lost [371248.677744] wlp1s0: authenticate with XXX (local address=XXX) [371248.679192] wlp1s0: send auth to XXX (try 1/3) [371248.686384] wlp1s0: authenticated [371248.687409] wlp1s0: associate with XXX (try 1/3) [371248.690447] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [371248.694132] wlp1s0: associated [371248.767534] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [371456.764684] wlp1s0: Connection to AP XXX lost [371458.137194] wlp1s0: authenticate with XXX (local address=XXX) [371458.138553] wlp1s0: send auth to XXX (try 1/3) [371458.147045] wlp1s0: authenticated [371458.148498] wlp1s0: associate with XXX (try 1/3) [371458.151481] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [371458.162731] wlp1s0: associated [371459.002403] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [371469.257721] wlp1s0: Connection to AP XXX lost [371470.412421] wlp1s0: authenticate with XXX (local address=XXX) [371470.413863] wlp1s0: send auth to XXX (try 1/3) [371470.419311] wlp1s0: authenticated [371470.420408] wlp1s0: associate with XXX (try 1/3) [371470.423625] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [371470.427109] wlp1s0: associated [371470.676201] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [383388.097862] wlp1s0: Connection to AP XXX lost [383401.504010] wlp1s0: authenticate with XXX (local address=XXX) [383401.505358] wlp1s0: send auth to XXX (try 1/3) [383401.514137] wlp1s0: authenticated [383401.515409] wlp1s0: associate with XXX (try 1/3) [383401.518889] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [383401.521897] wlp1s0: associated [383401.599034] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [383460.804497] wlp1s0: Connection to AP XXX lost [383475.537043] wlp1s0: authenticate with XXX (local address=XXX) [383475.538416] wlp1s0: send auth to XXX (try 1/3) [383475.548247] wlp1s0: authenticated [383475.549424] wlp1s0: associate with XXX (try 1/3) [383475.552366] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [383475.555860] wlp1s0: associated [383475.637643] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [395983.871643] wlp1s0: Connection to AP XXX lost [395993.251210] wlp1s0: authenticate with XXX (local address=XXX) [395993.253190] wlp1s0: send auth to XXX (try 1/3) [395993.256840] wlp1s0: authenticated [395993.258389] wlp1s0: associate with XXX (try 1/3) [395993.261426] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [395993.264269] wlp1s0: associated [395993.276737] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [396065.384966] wlp1s0: Connection to AP XXX lost [396072.555304] wlp1s0: authenticate with XXX (local address=XXX) [396072.556581] wlp1s0: send auth to XXX (try 1/3) [396072.565946] wlp1s0: authenticated [396072.566403] wlp1s0: associate with XXX (try 1/3) [396072.569484] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [396072.572118] wlp1s0: associated [396072.639554] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [396079.516607] wlp1s0: Connection to AP XXX lost [396080.526500] wlp1s0: authenticate with XXX (local address=XXX) [396080.527797] wlp1s0: send auth to XXX (try 1/3) [396080.533513] wlp1s0: authenticated [396080.534397] wlp1s0: associate with XXX (try 1/3) [396080.537377] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [396080.540081] wlp1s0: associated [396080.628375] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [396122.935695] wlp1s0: Connection to AP XXX lost [396137.881175] wlp1s0: authenticate with XXX (local address=XXX) [396137.882583] wlp1s0: send auth to XXX (try 1/3) [396137.891935] wlp1s0: authenticated [396137.892395] wlp1s0: associate with XXX (try 1/3) [396137.895413] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [396137.898580] wlp1s0: associated [396137.973419] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [408404.293274] wlp1s0: Connection to AP XXX lost [408405.549867] wlp1s0: authenticate with XXX (local address=XXX) [408405.551325] wlp1s0: send auth to XXX (try 1/3) [408405.553044] wlp1s0: authenticated [408405.553389] wlp1s0: associate with XXX (try 1/3) [408405.556313] wlp1s0: RX AssocResp from XXX (capab=0x1511 status=0 aid=1) [408405.566773] wlp1s0: associated [408405.612667] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [417102.840524] workqueue: acpi_os_execute_deferred hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND [427016.130810] loop18: detected capacity change from 0 to 23032 [427044.802572] loop19: detected capacity change from 0 to 895688 [427113.394950] printk: hwinfo (159288): Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated).