[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ 0.000000] Linux version 5.15.0-58-generic (XXX@XXX) (gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #64-Ubuntu SMP Thu Jan 5 11:43:13 UTC 2023 (Ubuntu 5.15.0-58.64-generic 5.15.74) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-58-generic root=UUID=HASH_D8E-3D7A-A4B2-7528-2D16DE4322A1 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c4226fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c4227000-0x00000000c422dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c422e000-0x00000000c467afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c467b000-0x00000000c4afdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c4afe000-0x00000000d4560fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d4561000-0x00000000d45eafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d45eb000-0x00000000d460efff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000d460f000-0x00000000d5320fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d5321000-0x00000000d5bfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d5bff000-0x00000000d5bfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d7000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc3c4b018-0xc3c5b057] usable ==> usable [ 0.000000] e820: update [mem 0xc3c4b018-0xc3c5b057] usable ==> usable [ 0.000000] e820: update [mem 0xc3c3b018-0xc3c4ac57] usable ==> usable [ 0.000000] e820: update [mem 0xc3c3b018-0xc3c4ac57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c3c3b017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c3c3b018-0x00000000c3c4ac57] usable [ 0.000000] reserve setup_data: [mem 0x00000000c3c4ac58-0x00000000c3c4b017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c3c4b018-0x00000000c3c5b057] usable [ 0.000000] reserve setup_data: [mem 0x00000000c3c5b058-0x00000000c4226fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c4227000-0x00000000c422dfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000c422e000-0x00000000c467afff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c467b000-0x00000000c4afdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c4afe000-0x00000000d4560fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d4561000-0x00000000d45eafff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d45eb000-0x00000000d460efff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000d460f000-0x00000000d5320fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000d5321000-0x00000000d5bfefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d5bff000-0x00000000d5bfffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d7000000-0x00000000df1fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021edfffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ESRT=0xd5b64818 ACPI=0xd45f2000 ACPI 2.0=0xd45f2000 SMBIOS=0xf0480 MOKvar=0xd5ac6000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO 10AM0007US/SHARKBAY, BIOS FBKT75AUS 04/01/2014 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.361 MHz processor [ 0.000659] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000662] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000671] last_pfn = 0x21ee00 max_arch_pfn = 0x400000000 [ 0.000793] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001400] total RAM covered: 8030M [ 0.001524] Found optimal setting for mtrr clean up [ 0.001524] gran_size: 64K chunk_size: 32M num_reg: 9 lose cover RAM: 0G [ 0.001835] e820: update [mem 0xd7000000-0xffffffff] usable ==> reserved [ 0.001839] last_pfn = 0xd5c00 max_arch_pfn = 0x400000000 [ 0.008447] found SMP MP-table at [mem 0x000fccb0-0x000fccbf] [ 0.008459] esrt: Reserving ESRT space from 0x00000000d5b64818 to 0x00000000d5b64850. [ 0.008468] Using GB pages for direct mapping [ 0.009228] secureboot: Secure boot disabled [ 0.009229] RAMDISK: [mem 0xb8aa5000-0xc0b1afff] [ 0.009234] ACPI: Early table checksum verification disabled [ 0.009237] ACPI: RSDP 0x00000000D45F2000 000024 (v02 LENOVO) [ 0.009240] ACPI: XSDT 0x00000000D45F2090 0000A4 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.009245] ACPI: FACP 0x00000000D4609740 00010C (v05 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.009250] ACPI: DSDT 0x00000000D45F21C8 017574 (v02 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.009254] ACPI: FACS 0x00000000D531F080 000040 [ 0.009256] ACPI: APIC 0x00000000D4609850 000072 (v03 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.009259] ACPI: FPDT 0x00000000D46098C8 000044 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.009261] ACPI: TCPA 0x00000000D4609910 000032 (v02 LENOVO TC-FB 000014B0 MSFT 01000013) [ 0.009264] ACPI: LPIT 0x00000000D4609948 00005C (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.009267] ACPI: MSDM 0x00000000D46099A8 000055 (v03 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.009270] ACPI: SSDT 0x00000000D4609A00 000539 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.009272] ACPI: SSDT 0x00000000D4609F40 000AD8 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.009275] ACPI: MCFG 0x00000000D460AA18 00003C (v01 LENOVO TC-FB 000014B0 MSFT 00000097) [ 0.009278] ACPI: SLIC 0x00000000D460AA58 000176 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.009281] ACPI: HPET 0x00000000D460ABD0 000038 (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.009284] ACPI: SSDT 0x00000000D460AC08 00036D (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.009286] ACPI: SSDT 0x00000000D460AF78 0034E1 (v01 LENOVO TC-FB 000014B0 INTL 20091112) [ 0.009289] ACPI: ASF! 0x00000000D460E460 0000A5 (v32 LENOVO TC-FB 000014B0 TFSM 000F4240) [ 0.009292] ACPI: BGRT 0x00000000D460E508 000038 (v00 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.009295] ACPI: DMAR 0x00000000D460E540 0000B8 (v01 LENOVO TC-FB 000014B0 INTL 00000001) [ 0.009297] ACPI: Reserving FACP table memory at [mem 0xd4609740-0xd460984b] [ 0.009299] ACPI: Reserving DSDT table memory at [mem 0xd45f21c8-0xd460973b] [ 0.009299] ACPI: Reserving FACS table memory at [mem 0xd531f080-0xd531f0bf] [ 0.009300] ACPI: Reserving APIC table memory at [mem 0xd4609850-0xd46098c1] [ 0.009301] ACPI: Reserving FPDT table memory at [mem 0xd46098c8-0xd460990b] [ 0.009302] ACPI: Reserving TCPA table memory at [mem 0xd4609910-0xd4609941] [ 0.009303] ACPI: Reserving LPIT table memory at [mem 0xd4609948-0xd46099a3] [ 0.009304] ACPI: Reserving MSDM table memory at [mem 0xd46099a8-0xd46099fc] [ 0.009305] ACPI: Reserving SSDT table memory at [mem 0xd4609a00-0xd4609f38] [ 0.009306] ACPI: Reserving SSDT table memory at [mem 0xd4609f40-0xd460aa17] [ 0.009306] ACPI: Reserving MCFG table memory at [mem 0xd460aa18-0xd460aa53] [ 0.009307] ACPI: Reserving SLIC table memory at [mem 0xd460aa58-0xd460abcd] [ 0.009308] ACPI: Reserving HPET table memory at [mem 0xd460abd0-0xd460ac07] [ 0.009309] ACPI: Reserving SSDT table memory at [mem 0xd460ac08-0xd460af74] [ 0.009310] ACPI: Reserving SSDT table memory at [mem 0xd460af78-0xd460e458] [ 0.009311] ACPI: Reserving ASF! table memory at [mem 0xd460e460-0xd460e504] [ 0.009312] ACPI: Reserving BGRT table memory at [mem 0xd460e508-0xd460e53f] [ 0.009313] ACPI: Reserving DMAR table memory at [mem 0xd460e540-0xd460e5f7] [ 0.009424] No NUMA configuration found [ 0.009425] Faking a node at [mem 0x0000000000000000-0x000000021edfffff] [ 0.009433] NODE_DATA(0) allocated [mem 0x21edd6000-0x21edfffff] [ 0.009706] Zone ranges: [ 0.009707] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009708] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.009710] Normal [mem 0x0000000100000000-0x000000021edfffff] [ 0.009711] Device empty [ 0.009712] Movable zone start for each node [ 0.009715] Early memory node ranges [ 0.009715] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.009717] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.009717] node 0: [mem 0x0000000000100000-0x00000000c4226fff] [ 0.009719] node 0: [mem 0x00000000c422e000-0x00000000c467afff] [ 0.009720] node 0: [mem 0x00000000c4afe000-0x00000000d4560fff] [ 0.009720] node 0: [mem 0x00000000d5bff000-0x00000000d5bfffff] [ 0.009721] node 0: [mem 0x0000000100000000-0x000000021edfffff] [ 0.009723] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff] [ 0.009726] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009728] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009761] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.019003] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.019787] On node 0, zone DMA32: 1155 pages in unavailable ranges [ 0.019859] On node 0, zone DMA32: 5790 pages in unavailable ranges [ 0.034003] On node 0, zone Normal: 9216 pages in unavailable ranges [ 0.034063] On node 0, zone Normal: 4608 pages in unavailable ranges [ 0.034075] Reserving Intel graphics memory at [mem 0xd7200000-0xdf1fffff] [ 0.034137] ACPI: PM-Timer IO Port: 0x1808 [ 0.034144] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.034160] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.034162] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.034164] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.034167] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.034168] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.034176] e820: update [mem 0xc83db000-0xc8422fff] usable ==> reserved [ 0.034189] TSC deadline timer available [ 0.034190] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.034210] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.034212] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.034214] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.034215] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.034217] PM: hibernation: Registered nosave memory: [mem 0xc3c3b000-0xc3c3bfff] [ 0.034218] PM: hibernation: Registered nosave memory: [mem 0xc3c4a000-0xc3c4afff] [ 0.034219] PM: hibernation: Registered nosave memory: [mem 0xc3c4b000-0xc3c4bfff] [ 0.034221] PM: hibernation: Registered nosave memory: [mem 0xc3c5b000-0xc3c5bfff] [ 0.034223] PM: hibernation: Registered nosave memory: [mem 0xc4227000-0xc422dfff] [ 0.034224] PM: hibernation: Registered nosave memory: [mem 0xc467b000-0xc4afdfff] [ 0.034226] PM: hibernation: Registered nosave memory: [mem 0xc83db000-0xc8422fff] [ 0.034228] PM: hibernation: Registered nosave memory: [mem 0xd4561000-0xd45eafff] [ 0.034229] PM: hibernation: Registered nosave memory: [mem 0xd45eb000-0xd460efff] [ 0.034230] PM: hibernation: Registered nosave memory: [mem 0xd460f000-0xd5320fff] [ 0.034230] PM: hibernation: Registered nosave memory: [mem 0xd5321000-0xd5bfefff] [ 0.034232] PM: hibernation: Registered nosave memory: [mem 0xd5c00000-0xd6ffffff] [ 0.034233] PM: hibernation: Registered nosave memory: [mem 0xd7000000-0xdf1fffff] [ 0.034234] PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ 0.034235] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.034236] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.034236] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.034237] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.034238] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.034239] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.034240] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.034240] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.034241] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.034242] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.034243] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.034244] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.034246] Booting paravirtualized kernel on bare hardware [ 0.034248] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034255] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.034518] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288 [ 0.034525] pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152 [ 0.034527] pcpu-alloc: [0] 0 1 2 3 [ 0.034555] Built 1 zonelists, mobility grouping on. Total pages: 2011164 [ 0.034556] Policy zone: Normal [ 0.034557] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-58-generic root=UUID=HASH_D8E-3D7A-A4B2-7528-2D16DE4322A1 ro quiet splash [ 0.034616] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-58-generic", will be passed to user space. [ 0.035334] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.035701] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.035747] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.081639] Memory: 7583976K/8174036K available (16393K kernel code, 4378K rwdata, 10812K rodata, 3232K init, 6568K bss, 589800K reserved, 0K cma-reserved) [ 0.082156] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.082179] Kernel/User page tables isolation: enabled [ 0.082194] ftrace: allocating 50532 entries in 198 pages [ 0.102187] ftrace: allocated 198 pages with 4 groups [ 0.102323] rcu: Hierarchical RCU implementation. [ 0.102325] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.102326] Rude variant of Tasks RCU enabled. [ 0.102327] Tracing variant of Tasks RCU enabled. [ 0.102327] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.102328] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.106129] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.106345] random: crng init done [ 0.106366] Console: colour dummy device 80x25 [ 0.106381] printk: console [tty0] enabled [ 0.106396] ACPI: Core revision 20210730 [ 0.106517] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.106531] APIC: Switch to symmetric I/O mode setup [ 0.106533] DMAR: Host address width 39 [ 0.106534] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.106538] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.106540] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.106542] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.106544] DMAR: RMRR base: 0x000000d5a70000 end: 0x000000d5a96fff [ 0.106545] DMAR: RMRR base: 0x000000d7000000 end: 0x000000df1fffff [ 0.106547] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.106548] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.106549] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.107296] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.107297] x2apic enabled [ 0.107303] Switched APIC routing to cluster x2apic. [ 0.107722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.126538] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0419c90d4, max_idle_ns: 440795348157 ns [ 0.126544] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.72 BogoMIPS (lpj=12769444) [ 0.126547] pid_max: default: 32768 minimum: 301 [ 0.131077] LSM: Security Framework initializing [ 0.131086] landlock: Up and running. [ 0.131087] Yama: becoming mindful. [ 0.131111] AppArmor: AppArmor initialized [ 0.131158] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.131183] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.131413] CPU0: Thermal monitoring enabled (TM1) [ 0.131445] process: using mwait in idle threads [ 0.131447] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.131449] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.131452] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.131454] Spectre V2 : Mitigation: Retpolines [ 0.131455] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.131455] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.131456] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.131457] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.131459] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.131461] MDS: Mitigation: Clear CPU buffers [ 0.131462] MMIO Stale Data: Unknown: No mitigations [ 0.131463] SRBDS: Mitigation: Microcode [ 0.147613] Freeing SMP alternatives memory: 40K [ 0.148901] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1088 [ 0.148914] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.149020] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.149048] ... version: 3 [ 0.149048] ... bit width: 48 [ 0.149049] ... generic registers: 8 [ 0.149049] ... value mask: 0000ffffffffffff [ 0.149050] ... max period: 00007fffffffffff [ 0.149051] ... fixed-purpose events: 3 [ 0.149052] ... event mask: 00000007000000ff [ 0.149138] rcu: Hierarchical SRCU implementation. [ 0.149683] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.149718] smp: Bringing up secondary CPUs ... [ 0.149786] x86: Booting SMP configuration: [ 0.149787] .... node #0, CPUs: #1 #2 #3 [ 0.152029] smp: Brought up 1 node, 4 CPUs [ 0.152029] smpboot: Max logical packages: 1 [ 0.152029] smpboot: Total of 4 processors activated (25538.88 BogoMIPS) [ 0.152029] devtmpfs: initialized [ 0.152029] x86/mm: Memory block size: 128MB [ 0.154993] ACPI: PM: Registering ACPI NVS region [mem 0xc4227000-0xc422dfff] (28672 bytes) [ 0.154993] ACPI: PM: Registering ACPI NVS region [mem 0xd460f000-0xd5320fff] (13705216 bytes) [ 0.154993] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.154993] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.154993] pinctrl core: initialized pinctrl subsystem [ 0.154993] PM: RTC time: 21:16:21, date: 2023-05-16 [ 0.154993] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.155056] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.155108] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.155159] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.155169] thermal_sys: Registered thermal governor 'fair_share' [ 0.155169] thermal_sys: Registered thermal governor 'bang_bang' [ 0.155169] thermal_sys: Registered thermal governor 'step_wise' [ 0.155169] thermal_sys: Registered thermal governor 'user_space' [ 0.155169] thermal_sys: Registered thermal governor 'power_allocator' [ 0.155169] EISA bus registered [ 0.155169] cpuidle: using governor ladder [ 0.155169] cpuidle: using governor menu [ 0.155169] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.155169] ACPI: bus type PCI registered [ 0.155169] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.155169] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.155169] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.155169] PCI: Using configuration type 1 for base access [ 0.155169] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.155169] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.155542] Kprobes globally optimized [ 0.155545] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.155545] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.155545] ACPI: Added _OSI(Module Device) [ 0.155545] ACPI: Added _OSI(Processor Device) [ 0.155545] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.155545] ACPI: Added _OSI(Processor Aggregator Device) [ 0.155545] ACPI: Added _OSI(Linux-Dell-Video) [ 0.155545] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.155545] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.170721] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.172093] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.174996] ACPI: Dynamic OEM Table Load: [ 0.175002] ACPI: SSDT 0xFFFF9A3500FF8C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.175925] ACPI: Dynamic OEM Table Load: [ 0.175930] ACPI: SSDT 0xFFFF9A35012AF800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.176856] ACPI: Dynamic OEM Table Load: [ 0.176860] ACPI: SSDT 0xFFFF9A35001F7C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.180642] ACPI: Interpreter enabled [ 0.180669] ACPI: PM: (supports S0 S3 S4 S5) [ 0.180671] ACPI: Using IOAPIC for interrupt routing [ 0.180696] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.180698] PCI: Using E820 reservations for host bridge windows [ 0.181337] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.191870] ACPI: PM: Power Resource [FN00] [ 0.191936] ACPI: PM: Power Resource [FN01] [ 0.192000] ACPI: PM: Power Resource [FN02] [ 0.192063] ACPI: PM: Power Resource [FN03] [ 0.192127] ACPI: PM: Power Resource [FN04] [ 0.193096] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.193102] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.193816] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] [ 0.193817] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.194303] PCI host bridge to bus 0000:00 [ 0.194306] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.194307] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.194309] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.194310] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.194311] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.194312] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.194359] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.194517] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.194524] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.194529] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.194533] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.194542] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.194545] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.194668] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.194674] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ 0.194828] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.194844] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ 0.194894] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.194998] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.195015] pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit] [ 0.195070] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.195185] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 [ 0.195196] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.195201] pci 0000:00:16.3: reg 0x14: [mem 0xf7c3e000-0xf7c3efff] [ 0.195393] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ 0.195405] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ 0.195412] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ 0.195420] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.195469] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.195604] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.195619] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff] [ 0.195691] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.195828] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.195842] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ 0.195896] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.196032] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.196047] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ 0.196120] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.196258] pci 0000:00:1f.0: [8086:8c4c] type 00 class 0x060100 [ 0.196477] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.196489] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.196495] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.196502] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.196508] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.196514] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.196520] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ 0.196551] pci 0000:00:1f.2: PME# supported from D3hot [ 0.196676] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.196691] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ 0.196709] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 0.198097] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.198167] ACPI: PCI: Interrupt link LNKB configured for IRQ 3 [ 0.198231] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.198294] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.198357] ACPI: PCI: Interrupt link LNKE configured for IRQ 5 [ 0.198425] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.198426] ACPI: PCI: Interrupt link LNKF disabled [ 0.198493] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.198564] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.199043] iommu: Default domain type: Translated [ 0.199043] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.199043] SCSI subsystem initialized [ 0.199043] libata version 3.00 loaded. [ 0.199043] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.199043] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.199043] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.199043] vgaarb: loaded [ 0.199043] ACPI: bus type USB registered [ 0.199043] usbcore: registered new interface driver usbfs [ 0.199043] usbcore: registered new interface driver hub [ 0.199043] usbcore: registered new device driver usb [ 0.199043] pps_core: LinuxPPS API ver. 1 registered [ 0.199043] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.199043] PTP clock support registered [ 0.199043] EDAC MC: Ver: 3.0.0 [ 0.199043] Registered efivars operations [ 0.199043] NetLabel: Initializing [ 0.199043] NetLabel: domain hash size = 128 [ 0.199043] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.199043] NetLabel: unlabeled traffic allowed by default [ 0.199043] PCI: Using ACPI for IRQ routing [ 0.199849] PCI: pci_cache_line_size set to 64 bytes [ 0.199876] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.199878] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.199878] e820: reserve RAM buffer [mem 0xc3c3b018-0xc3ffffff] [ 0.199880] e820: reserve RAM buffer [mem 0xc3c4b018-0xc3ffffff] [ 0.199880] e820: reserve RAM buffer [mem 0xc4227000-0xc7ffffff] [ 0.199881] e820: reserve RAM buffer [mem 0xc467b000-0xc7ffffff] [ 0.199882] e820: reserve RAM buffer [mem 0xc83db000-0xcbffffff] [ 0.199883] e820: reserve RAM buffer [mem 0xd4561000-0xd7ffffff] [ 0.199884] e820: reserve RAM buffer [mem 0xd5c00000-0xd7ffffff] [ 0.199885] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff] [ 0.199888] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.199888] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.203580] clocksource: Switched to clocksource tsc-early [ 0.210673] VFS: Disk quotas dquot_6.6.0 [ 0.210685] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.210773] AppArmor: AppArmor Filesystem Enabled [ 0.210804] pnp: PnP ACPI init [ 0.211075] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.211079] system 00:00: [io 0xffff] has been reserved [ 0.211080] system 00:00: [io 0xffff] has been reserved [ 0.211081] system 00:00: [io 0xffff] has been reserved [ 0.211082] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.211083] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.211085] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.211086] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.211087] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.211088] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.211155] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.211305] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.211307] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.211308] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.211361] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.211564] pnp 00:05: [dma 0 disabled] [ 0.212608] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.212610] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.212611] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.212612] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.212614] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.212615] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.212616] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.212618] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.212619] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.212620] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.212621] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.212623] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.212993] pnp: PnP ACPI: found 8 devices [ 0.218344] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.218389] NET: Registered PF_INET protocol family [ 0.218492] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.219454] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.219482] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.219530] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.219649] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.219704] TCP: Hash tables configured (established 65536 bind 65536) [ 0.219754] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.219790] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.219810] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.219842] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.219845] NET: Registered PF_XDP protocol family [ 0.219854] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.219856] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.219857] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.219858] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.219859] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] [ 0.242629] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x160 took 21766 usecs [ 0.266625] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x160 took 23416 usecs [ 0.266645] PCI: CLS 64 bytes, default 64 [ 0.266671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.266672] software IO TLB: mapped [mem 0x00000000b4aa5000-0x00000000b8aa5000] (64MB) [ 0.266684] Trying to unpack rootfs image as initramfs... [ 0.267194] Initialise system trusted keyrings [ 0.267205] Key type blacklist registered [ 0.267238] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.268195] zbud: loaded [ 0.268385] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.268522] fuse: init (API version 7.34) [ 0.268671] integrity: Platform Keyring initialized [ 0.277079] Key type asymmetric registered [ 0.277080] Asymmetric key parser 'x509' registered [ 0.277096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.277123] io scheduler mq-deadline registered [ 0.277435] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.277866] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.277895] ACPI: button: Power Button [PWRB] [ 0.277924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.277941] ACPI: button: Power Button [PWRF] [ 0.278530] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.278532] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.278794] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.278795] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.279079] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.300113] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.302172] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 0.322542] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.323041] Linux agpgart interface v0.103 [ 0.326221] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) [ 0.386887] loop: module loaded [ 0.387102] tun: Universal TUN/TAP device driver, 1.6 [ 0.387142] PPP generic driver version 2.4.2 [ 0.387248] VFIO - User Level meta-driver version: 0.3 [ 0.387393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.387395] ehci-pci: EHCI PCI platform driver [ 0.387542] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.387548] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.387563] ehci-pci 0000:00:1a.0: debug port 2 [ 0.391503] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7c3c000 [ 0.406577] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.406648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 0.406650] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.406651] usb usb1: Product: EHCI Host Controller [ 0.406652] usb usb1: Manufacturer: Linux 5.15.0-58-generic ehci_hcd [ 0.406653] usb usb1: SerialNumber: ... [ 0.406807] hub 1-0:1.0: USB hub found [ 0.406812] hub 1-0:1.0: 3 ports detected [ 0.407080] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.407084] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.407093] ehci-pci 0000:00:1d.0: debug port 2 [ 0.410999] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ 0.426587] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.426641] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 0.426643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.426645] usb usb2: Product: EHCI Host Controller [ 0.426646] usb usb2: Manufacturer: Linux 5.15.0-58-generic ehci_hcd [ 0.426647] usb usb2: SerialNumber: ... [ 0.426803] hub 2-0:1.0: USB hub found [ 0.426808] hub 2-0:1.0: 3 ports detected [ 0.426958] ehci-platform: EHCI generic platform driver [ 0.426971] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.426974] ohci-pci: OHCI PCI platform driver [ 0.426982] ohci-platform: OHCI generic platform driver [ 0.426988] uhci_hcd: USB Universal Host Controller Interface driver [ 0.427025] i8042: PNP: No PS/2 controller found. [ 0.427199] mousedev: PS/2 mouse device common for all mice [ 0.427441] rtc_cmos 00:01: RTC can wake from S4 [ 0.427629] rtc_cmos 00:01: registered as rtc0 [ 0.427664] rtc_cmos 00:01: setting system clock to 2023-05-16T21:16:21 UTC (1684271781) [ 0.427677] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.427683] i2c_dev: i2c /dev entries driver [ 0.427766] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.427800] device-mapper: uevent: version 1.0.3 [ 0.427858] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 0.427885] platform eisa.0: Probing EISA bus 0 [ 0.427887] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.427888] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.427889] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.427890] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.427890] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.427891] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.427892] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.427893] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.427894] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.427894] platform eisa.0: EISA: Detected 0 cards [ 0.427898] intel_pstate: Intel P-state driver initializing [ 0.428189] ledtrig-cpu: registered to indicate activity on CPUs [ 0.428216] efifb: probing for efifb [ 0.428233] efifb: showing boot graphics [ 0.429454] efifb: framebuffer at 0xe0000000, using 9000k, total 9000k [ 0.429456] efifb: mode is 1920x1200x32, linelength=7680, pages=1 [ 0.429457] efifb: scrolling: redraw [ 0.429458] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.429496] fbcon: Deferring console take-over [ 0.429497] fb0: EFI VGA frame buffer device [ 0.429503] EFI Variables Facility v0.08 2004-May-17 [ 0.438278] drop_monitor: Initializing network drop monitor service [ 0.438404] NET: Registered PF_INET6 protocol family [ 0.742591] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.762568] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.874507] Freeing initrd memory: 131544K [ 0.880048] Segment Routing with IPv6 [ 0.880069] In-situ OAM (IOAM) with IPv6 [ 0.880092] NET: Registered PF_PACKET protocol family [ 0.880182] Key type dns_resolver registered [ 0.880558] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ 0.880637] microcode: Microcode Update Driver: v2.2. [ 0.880642] IPI shorthand broadcast: enabled [ 0.880649] sched_clock: Marking stable (880425421, 208811)->(884489506, -3855274) [ 0.880776] registered taskstats version 1 [ 0.880927] Loading compiled-in X.509 certificates [ 0.881606] Loaded X.509 cert 'Build time autogenerated kernel key: 506bbeb375a739f193260990a9361a99a99bed1c' [ 0.882133] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.882639] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.882640] blacklist: Loading compiled-in revocation X.509 certificates [ 0.882653] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.882763] zswap: loaded using pool lzo/zbud [ 0.883006] Key type ._fscrypt registered [ 0.883007] Key type .fscrypt registered [ 0.883008] Key type fscrypt-provisioning registered [ 0.883075] Key type trusted registered [ 0.885315] Key type encrypted registered [ 0.885316] AppArmor: AppArmor sha1 policy hashing enabled [ 0.885626] integrity: Loading X.509 certificate: UEFI:db [ 0.885647] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.885648] integrity: Loading X.509 certificate: UEFI:db [ 0.885665] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.885665] integrity: Loading X.509 certificate: UEFI:db [ 0.885971] integrity: Loaded X.509 cert 'Trust - Lenovo Certificate: ddfada488c169b80473d73f8a38a5d58' [ 0.886227] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.886400] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.886403] Loading compiled-in module X.509 certificates [ 0.886972] Loaded X.509 cert 'Build time autogenerated kernel key: 506bbeb375a739f193260990a9361a99a99bed1c' [ 0.886974] ima: Allocated hash algorithm: sha1 [ 0.907021] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.907035] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.907340] hub 1-1:1.0: USB hub found [ 0.907545] hub 1-1:1.0: 6 ports detected [ 0.927016] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.927021] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 0.927305] hub 2-1:1.0: USB hub found [ 0.927510] hub 2-1:1.0: 8 ports detected [ 0.979154] ima: No architecture policies found [ 0.979174] evm: Initialising EVM extended attributes: [ 0.979175] evm: security.selinux [ 0.979176] evm: security.SMACK64 [ 0.979177] evm: security.SMACK64EXEC [ 0.979178] evm: security.SMACK64TRANSMUTE [ 0.979178] evm: security.SMACK64MMAP [ 0.979179] evm: security.apparmor [ 0.979179] evm: security.ima [ 0.979180] evm: security.capability [ 0.979180] evm: HMAC attrs: 0x1 [ 0.979457] PM: Magic number: 7:145:298 [ 0.979697] RAS: Correctable Errors collector initialized. [ 0.980604] Freeing unused decrypted memory: 2036K [ 0.980995] Freeing unused kernel image (initmem) memory: 3232K [ 0.994605] Write protecting the kernel read-only data: 30720k [ 0.995133] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.995426] Freeing unused kernel image (rodata/data gap) memory: 1476K [ 1.057284] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.057286] x86/mm: Checking user space page tables [ 1.097418] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.097422] Run /init as init process [ 1.097423] with arguments: [ 1.097424] /init [ 1.097424] splash [ 1.097425] with environment: [ 1.097425] HOME=/ [ 1.097426] TERM=linux [ 1.097426] BOOT_IMAGE=/boot/vmlinuz-5.15.0-58-generic [ 1.171600] e1000e: Intel(R) PRO/1000 Network Driver [ 1.171602] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.171801] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.171807] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.171883] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20210730/utaddress-204) [ 1.171888] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.171896] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210730/utaddress-204) [ 1.171898] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.171899] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20210730/utaddress-204) [ 1.171902] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20210730/utaddress-204) [ 1.171904] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210730/utaddress-204) [ 1.171906] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.171907] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRE) (20210730/utaddress-204) [ 1.171910] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C1F (\GPBL) (20210730/utaddress-204) [ 1.171912] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20210730/utaddress-204) [ 1.171915] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20210730/utaddress-204) [ 1.171917] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 1.171917] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.172879] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.173049] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.173051] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.173053] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.173383] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.173395] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.173396] usb usb3: Product: xHCI Host Controller [ 1.173397] usb usb3: Manufacturer: Linux 5.15.0-58-generic xhci-hcd [ 1.173398] usb usb3: SerialNumber: ... [ 1.173509] hub 3-0:1.0: USB hub found [ 1.174675] hub 3-0:1.0: 14 ports detected [ 1.175202] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.176914] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 1.177044] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.177863] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 1.181365] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 1.182186] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.182188] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.182189] usb usb4: Product: xHCI Host Controller [ 1.182191] usb usb4: Manufacturer: Linux 5.15.0-58-generic xhci-hcd [ 1.182191] usb usb4: SerialNumber: ... [ 1.182273] hub 4-0:1.0: USB hub found [ 1.182289] hub 4-0:1.0: 6 ports detected [ 1.184492] ahci 0000:00:1f.2: version 3.0 [ 1.184633] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.184653] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode [ 1.184655] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.212132] cryptd: max_cpu_qlen set to 1000 [ 1.215098] scsi host0: ahci [ 1.215183] scsi host1: ahci [ 1.215239] scsi host2: ahci [ 1.215300] scsi host3: ahci [ 1.215359] scsi host4: ahci [ 1.215429] scsi host5: ahci [ 1.215460] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 28 [ 1.215463] ata2: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a180 irq 28 [ 1.215464] ata3: DUMMY [ 1.215467] ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 28 [ 1.215467] ata5: DUMMY [ 1.215468] ata6: DUMMY [ 1.222683] AVX2 version of gcm_enc/dec engaged. [ 1.222707] AES CTR mode by8 optimization enabled [ 1.250638] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.254502] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.255973] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.273427] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 1.275272] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.275528] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 1.286571] tsc: Refined TSC clocksource calibration: 3192.590 MHz [ 1.286577] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e04f1e405e, max_idle_ns: 440795268354 ns [ 1.296494] clocksource: Switched to clocksource tsc [ 1.311357] fbcon: i915drmfb (fb0) is primary device [ 1.311359] fbcon: Deferring console take-over [ 1.311361] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 1.316184] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XXX [ 1.316187] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.316240] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.514592] usb 3-2: new low-speed USB device number 2 using xhci_hcd [ 1.529662] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.531836] ata1.00: ATAPI: HL-DT-ST DVD-RAM GHB0N, JE00, max UDMA/133 [ 1.537888] ata1.00: configured for UDMA/133 [ 1.546616] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GHB0N JE00 PQ: 0 ANSI: 5 [ 1.619681] sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/8x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.619692] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.653190] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.653339] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.668424] usb 3-2: New USB device found, idVendor=0461, idProduct=4e24, bcdDevice= 1.16 [ 1.668430] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.668432] usb 3-2: Product: HP USB Multimedia Keyboard [ 1.668434] usb 3-2: Manufacturer: PRIMAX [ 1.675219] hid: raw HID events driver (C) Jiri Kosina [ 1.794632] usb 3-3: new high-speed USB device number 3 using xhci_hcd [ 1.949400] usb 3-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice=90.11 [ 1.949413] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.949419] usb 3-3: Product: USB2.0 Hub [ 1.949423] usb 3-3: Manufacturer: VIA Labs, Inc. [ 1.950639] hub 3-3:1.0: USB hub found [ 1.951505] hub 3-3:1.0: 4 ports detected [ 1.970433] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.974446] ata2.00: ATA-9: KingFast, U0326A0, max UDMA/133 [ 1.976874] ata2.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.986650] ata2.00: configured for UDMA/133 [ 1.986895] scsi 1:0:0:0: Direct-Access ATA KingFast 6A0 PQ: 0 ANSI: 5 [ 1.987344] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.987522] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.987539] sd 1:0:0:0: [sda] Write Protect is off [ 1.987543] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.987609] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.016687] sda: sda1 sda2 sda3 [ 2.030881] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.094621] usb 3-7: new high-speed USB device number 4 using xhci_hcd [ 2.243359] usb 3-7: New USB device found, idVendor=13b1, idProduct=0045, bcdDevice= 2.10 [ 2.243364] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.243365] usb 3-7: Product: WUSB6300 V2 [ 2.243366] usb 3-7: Manufacturer: Linksys [ 2.243367] usb 3-7: SerialNumber: ... [ 2.302004] ata4: SATA link down (SStatus 0 SControl 300) [ 2.305202] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 2.309351] usbcore: registered new interface driver usbhid [ 2.309355] usbhid: USB HID core driver [ 2.310984] input: PRIMAX HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:0461:4E24.0001/input/input3 [ 2.334588] usb 3-3.2: new high-speed USB device number 5 using xhci_hcd [ 2.370744] hid-generic 0003:0461:4E24.0001: input,hidraw0: USB HID v1.10 Keyboard [PRIMAX HP USB Multimedia Keyboard] on usb-0000:00:14.0-2/input0 [ 2.370895] input: PRIMAX HP USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:0461:4E24.0002/input/input4 [ 2.430695] input: PRIMAX HP USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:0461:4E24.0002/input/input5 [ 2.430876] hid-generic 0003:0461:4E24.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [PRIMAX HP USB Multimedia Keyboard] on usb-0000:00:14.0-2/input1 [ 2.528227] usb 3-3.2: New USB device found, idVendor=152d, idProduct=0565, bcdDevice=91.28 [ 2.528242] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.528243] usb 3-3.2: Product: External Disk 3.0 [ 2.528245] usb 3-3.2: Manufacturer: JMicron [ 2.528246] usb 3-3.2: SerialNumber: ... [ 2.532000] usbcore: registered new interface driver usb-storage [ 2.535206] scsi host6: uas [ 2.535259] usbcore: registered new interface driver uas [ 2.536023] scsi 6:0:0:0: Direct-Access JMicron Tech 9128 PQ: 0 ANSI: 6 [ 2.537675] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.539366] sd 6:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 2.539716] sd 6:0:0:0: [sdb] Write Protect is off [ 2.539718] sd 6:0:0:0: [sdb] Mode Sense: 67 00 10 08 [ 2.540383] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 2.540943] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes [ 2.639535] sdb: sdb1 sdb2 sdb3 [ 2.654591] usb 3-9: new high-speed USB device number 6 using xhci_hcd [ 2.656895] sd 6:0:0:0: [sdb] Attached SCSI disk [ 2.804389] usb 3-9: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 2.14 [ 2.804393] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.804394] usb 3-9: Product: USB2.0 Hub [ 2.804396] usb 3-9: Manufacturer: VIA Labs, Inc. [ 2.805352] hub 3-9:1.0: USB hub found [ 2.805546] hub 3-9:1.0: 4 ports detected [ 2.898556] usb 3-3.3: new high-speed USB device number 7 using xhci_hcd [ 3.011179] usb 3-3.3: New USB device found, idVendor=2357, idProduct=0109, bcdDevice= 2.00 [ 3.011183] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.011184] usb 3-3.3: Product: 802.11n NIC [ 3.011185] usb 3-3.3: Manufacturer: Realtek [ 3.011186] usb 3-3.3: SerialNumber: ... [ 3.538622] usb 3-9.1: new low-speed USB device number 8 using xhci_hcd [ 3.694560] raid6: avx2x4 gen() 33675 MB/s [ 3.762562] raid6: avx2x4 xor() 9849 MB/s [ 3.776876] usb 3-9.1: New USB device found, idVendor=0e8f, idProduct=00a8, bcdDevice= 3.11 [ 3.776879] usb 3-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.776880] usb 3-9.1: Product: 2.4G RX [ 3.776882] usb 3-9.1: Manufacturer: DaKai [ 3.785038] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0E8F:00A8.0003/input/input6 [ 3.830561] raid6: avx2x2 gen() 32262 MB/s [ 3.842700] hid-generic 0003:0E8F:00A8.0003: input,hidraw2: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:14.0-9.1/input0 [ 3.849309] input: DaKai 2.4G RX Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0E8F:00A8.0004/input/input7 [ 3.849543] input: DaKai 2.4G RX System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0E8F:00A8.0004/input/input8 [ 3.898560] raid6: avx2x2 xor() 20409 MB/s [ 3.906696] input: DaKai 2.4G RX Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0E8F:00A8.0004/input/input9 [ 3.906864] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0E8F:00A8.0004/input/input10 [ 3.907133] hid-generic 0003:0E8F:00A8.0004: input,hiddev1,hidraw3: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:14.0-9.1/input1 [ 3.966560] raid6: avx2x1 gen() 29588 MB/s [ 4.034561] raid6: avx2x1 xor() 18082 MB/s [ 4.034570] usb 3-9.2: new high-speed USB device number 9 using xhci_hcd [ 4.102561] raid6: sse2x4 gen() 19057 MB/s [ 4.170561] raid6: sse2x4 xor() 9683 MB/s [ 4.238561] raid6: sse2x2 gen() 18257 MB/s [ 4.263588] usb 3-9.2: New USB device found, idVendor=0bc2, idProduct=331a, bcdDevice= 9.11 [ 4.263590] usb 3-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.263592] usb 3-9.2: Product: Expansion Desk [ 4.263593] usb 3-9.2: Manufacturer: Seagate [ 4.263594] usb 3-9.2: SerialNumber: ... [ 4.267303] scsi host7: uas [ 4.267827] scsi 7:0:0:0: Direct-Access Seagate Expansion Desk 0911 PQ: 0 ANSI: 6 [ 4.268963] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 4.269684] sd 7:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 4.269686] sd 7:0:0:0: [sdc] 4096-byte physical blocks [ 4.269851] sd 7:0:0:0: [sdc] Write Protect is off [ 4.269852] sd 7:0:0:0: [sdc] Mode Sense: 53 00 00 08 [ 4.270167] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.270400] sd 7:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 4.306561] raid6: sse2x2 xor() 11414 MB/s [ 4.341552] sdc: sdc1 sdc2 [ 4.342960] sd 7:0:0:0: [sdc] Attached SCSI disk [ 4.374562] raid6: sse2x1 gen() 15637 MB/s [ 4.442561] raid6: sse2x1 xor() 10356 MB/s [ 4.442562] raid6: using algorithm avx2x4 gen() 33675 MB/s [ 4.442563] raid6: .... xor() 9849 MB/s, rmw enabled [ 4.442564] raid6: using avx2x2 recovery algorithm [ 4.445663] xor: automatically using best checksumming function avx [ 4.468104] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 46.050226] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 48.002266] systemd[1]: Inserted module 'autofs4' [ 48.223611] systemd[1]: systemd 249.11-0ubuntu3.9 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 48.242806] systemd[1]: Detected architecture x86-64. [ 55.378619] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid \xe2\x86\x92 /run/teamviewerd.pid; please update the unit file accordingly. [ 55.682371] systemd[1]: Queued start job for default target Graphical Interface. [ 55.684547] systemd[1]: Created slice Slice /system/modprobe. [ 55.685207] systemd[1]: Created slice Slice /system/systemd-fsck. [ 55.685712] systemd[1]: Created slice User and Session Slice. [ 55.685817] systemd[1]: Started ntp-systemd-netif.path. [ 55.685950] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 55.686287] systemd[1]: Set up automount ... [ 55.686428] systemd[1]: Reached target User and Group Name Lookups. [ 55.686460] systemd[1]: Reached target Remote File Systems. [ 55.686485] systemd[1]: Reached target Slice Units. [ 55.686562] systemd[1]: Reached target Local Verity Protected Volumes. [ 55.686746] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 55.686958] systemd[1]: Listening on LVM2 poll daemon socket. [ 55.687152] systemd[1]: Listening on Syslog Socket. [ 55.689809] systemd[1]: Listening on Process Core Dump Socket. [ 55.690009] systemd[1]: Listening on fsck to fsckd communication Socket. [ 55.690135] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 55.690589] systemd[1]: Listening on Journal Audit Socket. [ 55.690810] systemd[1]: Listening on Journal Socket (/dev/log). [ 55.691048] systemd[1]: Listening on Journal Socket. [ 55.710200] systemd[1]: Listening on udev Control Socket. [ 55.710496] systemd[1]: Listening on udev Kernel Socket. [ 55.712272] systemd[1]: Mounting Huge Pages File System... [ 55.713433] systemd[1]: Mounting POSIX Message Queue File System... [ 55.714238] systemd[1]: Mounting Kernel Debug File System... [ 55.715036] systemd[1]: Mounting Kernel Trace File System... [ 55.716419] systemd[1]: Starting Journal Service... [ 55.716546] systemd[1]: Finished Availability of block devices. [ 55.717348] systemd[1]: Starting Set the console keyboard layout... [ 55.717999] systemd[1]: Starting Create List of Static Device Nodes... [ 55.718564] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 55.719254] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 55.719910] systemd[1]: Starting Load Kernel Module configfs... [ 55.720552] systemd[1]: Starting Load Kernel Module drm... [ 55.721248] systemd[1]: Starting Load Kernel Module efi_pstore... [ 55.721927] systemd[1]: Starting Load Kernel Module fuse... [ 55.722675] systemd[1]: Starting Load Kernel Module pstore_blk... [ 55.723423] systemd[1]: Starting Load Kernel Module pstore_zone... [ 55.724132] systemd[1]: Starting Load Kernel Module ramoops... [ 55.724247] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 55.913864] pstore: Using crash dump compression: deflate [ 55.913872] pstore: Registered efi as persistent store backend [ 55.987721] systemd[1]: Starting Load Kernel Modules... [ 55.988414] systemd[1]: Starting Remount Root and Kernel File Systems... [ 55.989010] systemd[1]: Starting Coldplug All udev Devices... [ 55.990624] systemd[1]: Started Journal Service. [ 56.094995] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 56.311134] systemd-journald[392]: Received client request to flush runtime journal. [ 56.575656] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 56.627447] lp: driver loaded but no devices found [ 56.681232] ppdev: user-space parallel port driver [ 58.473938] at24 0-0053: supply vcc not found, using dummy regulator [ 58.474514] at24 0-0053: 256 byte spd EEPROM, read-only [ 58.479710] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 58.479712] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 58.479713] RAPL PMU: hw unit of domain package 2^-14 Joules [ 58.479714] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 58.479714] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 59.166981] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) [ 59.167105] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 59.167291] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 59.196617] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 59.196675] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 59.196734] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 59.196776] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 59.431021] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 59.431025] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 59.431027] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 59.431028] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 59.431029] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 59.431030] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 [ 59.431031] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 [ 59.431032] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 59.441490] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 59.441568] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 59.441605] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 59.441644] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18 [ 59.441686] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 [ 59.632762] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 59.632956] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 60.003497] intel_rapl_common: Found RAPL domain package [ 60.003500] intel_rapl_common: Found RAPL domain core [ 60.003501] intel_rapl_common: Found RAPL domain uncore [ 60.003502] intel_rapl_common: Found RAPL domain dram [ 60.003505] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 60.003510] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 60.125970] usb 3-3.3: Vendor: Realtek [ 60.125973] usb 3-3.3: Product: 802.11n NIC [ 60.125975] usb 3-3.3: Serial not available. [ 60.125975] usb 3-3.3: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes): [ 60.125977] usb 3-3.3: 00: 29 81 00 7c 01 40 03 00 [ 60.125979] usb 3-3.3: 08: 40 74 04 50 14 00 00 00 [ 60.125980] usb 3-3.3: 10: 27 28 29 2a 2a 2a 2b 2b [ 60.125981] usb 3-3.3: 18: 2b 2c 2c f2 ef ef ff ff [ 60.125982] usb 3-3.3: 20: ff ff ff ff ff ff ff ff [ 60.125983] usb 3-3.3: 28: ff ff ff ff ff ff ff ff [ 60.125984] usb 3-3.3: 30: ff ff ff ff ff ff ff ff [ 60.125985] usb 3-3.3: 38: ff ff 29 29 29 2a 2a 2a [ 60.125985] usb 3-3.3: 40: 2c 2b 2b 2b 2b f2 ef ef [ 60.125986] usb 3-3.3: 48: ff ff ff ff ff ff ff ff [ 60.125987] usb 3-3.3: 50: ff ff ff ff ff ff ff ff [ 60.125988] usb 3-3.3: 58: ff ff ff ff ff ff ff ff [ 60.125989] usb 3-3.3: 60: ff ff ff ff ff ff ff ff [ 60.125990] usb 3-3.3: 68: ff ff ff ff ff ff ff ff [ 60.125991] usb 3-3.3: 70: ff ff ff ff ff ff ff ff [ 60.125992] usb 3-3.3: 78: ff ff ff ff ff ff ff ff [ 60.125993] usb 3-3.3: 80: ff ff ff ff ff ff ff ff [ 60.125994] usb 3-3.3: 88: ff ff ff ff ff ff ff ff [ 60.125995] usb 3-3.3: 90: ff ff ff ff ff ff ff ff [ 60.125996] usb 3-3.3: 98: ff ff ff ff ff ff ff ff [ 60.125996] usb 3-3.3: a0: ff ff ff ff ff ff ff ff [ 60.125997] usb 3-3.3: a8: ff ff ff ff ff ff ff ff [ 60.125998] usb 3-3.3: b0: ff ff ff ff ff ff ff ff [ 60.125999] usb 3-3.3: b8: a2 1f 1e 00 00 00 ff ff [ 60.126000] usb 3-3.3: c0: ff 01 00 10 00 00 00 ff [ 60.126001] usb 3-3.3: c8: 00 00 ff ff ff ff ff ff [ 60.126002] usb 3-3.3: d0: 57 23 09 01 e7 47 02 6c [ 60.126003] usb 3-3.3: d8: 5a b0 4a a9 16 0a 03 52 [ 60.126004] usb 3-3.3: e0: 65 61 6c 74 65 6b 20 0e [ 60.126005] usb 3-3.3: e8: 03 38 30 32 2e 31 31 6e [ 60.126005] usb 3-3.3: f0: 20 4e 49 43 20 00 00 ff [ 60.126006] usb 3-3.3: f8: ff ff ff ff ff ff ff ff [ 60.126007] usb 3-3.3: 100: ff ff ff ff ff ff ff ff [ 60.126008] usb 3-3.3: 108: ff ff ff ff ff ff ff ff [ 60.126009] usb 3-3.3: 110: ff ff ff ff ff ff ff 0d [ 60.126010] usb 3-3.3: 118: 03 00 05 00 30 00 00 00 [ 60.126011] usb 3-3.3: 120: 00 93 ff ff ff ff ff ff [ 60.126012] usb 3-3.3: 128: ff ff ff ff ff ff ff ff [ 60.126013] usb 3-3.3: 130: f6 a8 98 2d 03 92 98 00 [ 60.126014] usb 3-3.3: 138: fc 8c 00 11 9b 44 02 0a [ 60.126015] usb 3-3.3: 140: ff ff ff ff ff ff ff ff [ 60.126015] usb 3-3.3: 148: ff ff ff ff ff ff ff ff [ 60.126016] usb 3-3.3: 150: ff ff ff ff ff ff ff ff [ 60.126017] usb 3-3.3: 158: ff ff ff ff ff ff ff ff [ 60.126018] usb 3-3.3: 160: ff ff ff ff ff ff ff ff [ 60.126019] usb 3-3.3: 168: ff ff ff ff ff ff ff ff [ 60.126020] usb 3-3.3: 170: ff ff ff ff ff ff ff ff [ 60.126021] usb 3-3.3: 178: ff ff ff ff ff ff ff ff [ 60.126022] usb 3-3.3: 180: ff ff ff ff ff ff ff ff [ 60.126023] usb 3-3.3: 188: ff ff ff ff ff ff ff ff [ 60.126024] usb 3-3.3: 190: ff ff ff ff ff ff ff ff [ 60.126025] usb 3-3.3: 198: ff ff ff ff ff ff ff ff [ 60.126025] usb 3-3.3: 1a0: ff ff ff ff ff ff ff ff [ 60.126026] usb 3-3.3: 1a8: ff ff ff ff ff ff ff ff [ 60.126027] usb 3-3.3: 1b0: ff ff ff ff ff ff ff ff [ 60.126028] usb 3-3.3: 1b8: ff ff ff ff ff ff ff ff [ 60.126029] usb 3-3.3: 1c0: ff ff ff ff ff ff ff ff [ 60.126030] usb 3-3.3: 1c8: ff ff ff ff ff ff ff ff [ 60.126031] usb 3-3.3: 1d0: ff ff ff ff ff ff ff ff [ 60.126032] usb 3-3.3: 1d8: ff ff ff ff ff ff ff ff [ 60.126033] usb 3-3.3: 1e0: ff ff ff ff ff ff ff ff [ 60.126034] usb 3-3.3: 1e8: ff ff ff ff ff ff ff ff [ 60.126034] usb 3-3.3: 1f0: ff ff ff ff ff ff ff ff [ 60.126035] usb 3-3.3: 1f8: ff ff ff ff ff ff ff ff [ 60.126036] usb 3-3.3: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 [ 60.126038] usb 3-3.3: RTL8192EU MAC: XXX [ 60.126040] usb 3-3.3: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin [ 60.197411] usb 3-3.3: Firmware revision 19.0 (signature 0x92e1) [ 61.222528] usbcore: registered new interface driver rtl8xxxu [ 61.225074] rtl8xxxu 3-3.3:1.0 wlx6c5ab04aa916: renamed from wlan0 [ 61.624245] spl: loading out-of-tree module taints kernel. [ 61.639763] znvpair: module license 'CDDL' taints kernel. [ 61.639766] Disabling lock debugging due to kernel taint [ 62.100670] ZFS: Loaded module v2.1.4-0ubuntu0.1, ZFS pool version 5000, ZFS filesystem version 5 [ 75.025079] wlx6c5ab04aa916: authenticate with XXX [ 75.029048] wlx6c5ab04aa916: send auth to XXX (try 1/3) [ 75.030482] wlx6c5ab04aa916: authenticated [ 75.038576] wlx6c5ab04aa916: associate with XXX (try 1/3) [ 75.047786] wlx6c5ab04aa916: RX AssocResp from XXX (capab=0x411 status=0 aid=7) [ 75.048560] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [ 75.049003] wlx6c5ab04aa916: associated [ 75.172196] IPv6: ADDRCONF(NETDEV_CHANGE): wlx6c5ab04aa916: link becomes ready [ 82.453914] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 82.457271] vboxdrv: Found 4 processor cores [ 82.474717] vboxdrv: TSC mode is Invariant, tentative frequency 3192577771 Hz [ 82.474720] vboxdrv: Successfully loaded version 6.1.38_Ubuntu r153438 (interface 0x00320000) [ 82.491530] VBoxNetFlt: Successfully started. [ 82.533303] VBoxNetAdp: Successfully started. [ 489.454047] EXT4-fs (sda2): 5 orphan inodes deleted [ 489.454051] EXT4-fs (sda2): recovery complete [ 489.456519] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none. [ 1606.313414] usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd [ 1606.350555] usb 4-5: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10 [ 1606.350568] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1606.350574] usb 4-5: Product: USB DISK 3.0 [ 1606.350578] usb 4-5: Manufacturer: [ 1606.350582] usb 4-5: SerialNumber: ... [ 1606.354666] usb-storage 4-5:1.0: USB Mass Storage device detected [ 1606.354924] scsi host8: usb-storage 4-5:1.0 [ 1607.367622] scsi 8:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 [ 1607.368104] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 1607.368502] sd 8:0:0:0: [sdd] 244285440 512-byte logical blocks: (125 GB/116 GiB) [ 1607.369168] sd 8:0:0:0: [sdd] Write Protect is off [ 1607.369175] sd 8:0:0:0: [sdd] Mode Sense: 45 00 00 00 [ 1607.369875] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1607.476024] sdd: sdd1 sdd2 sdd3 sdd4 [ 1607.478103] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 1622.675812] EXT4-fs (sdd4): recovery complete [ 1625.944955] EXT4-fs (sdd4): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none. [ 1628.007572] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1628.008248] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1628.008993] ISO 9660 Extensions: RRIP_1991A [ 1671.748523] sdd: detected capacity change from 244285440 to 0 [ 1698.955320] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1699.105578] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 1739.596944] usb 4-5: USB disconnect, device number 2 [ 1741.020801] usb 4-5: new SuperSpeed USB device number 3 using xhci_hcd [ 1741.053978] usb 4-5: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10 [ 1741.053992] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1741.053997] usb 4-5: Product: USB DISK 3.0 [ 1741.054002] usb 4-5: Manufacturer: [ 1741.054005] usb 4-5: SerialNumber: ... [ 1741.056154] usb-storage 4-5:1.0: USB Mass Storage device detected [ 1741.056450] scsi host8: usb-storage 4-5:1.0 [ 1742.091093] scsi 8:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 [ 1742.091772] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 1742.092153] sd 8:0:0:0: [sdd] 244285440 512-byte logical blocks: (125 GB/116 GiB) [ 1742.092954] sd 8:0:0:0: [sdd] Write Protect is off [ 1742.092961] sd 8:0:0:0: [sdd] Mode Sense: 45 00 00 00 [ 1742.093672] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1742.566538] sdd: sdd1 sdd2 sdd3 sdd4 [ 1742.568552] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 1804.390404] sdd: [ 1815.291352] sdd: [ 1815.437553] sdd: [ 2837.304185] perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 7871.273218] perf: interrupt took too long (3249 > 3148), lowering kernel.perf_event_max_sample_rate to 61500 [14394.504064] sdd: detected capacity change from 244285440 to 0 [14412.211394] usb 4-5: USB disconnect, device number 3 [14834.959344] perf: interrupt took too long (4085 > 4061), lowering kernel.perf_event_max_sample_rate to 48750 [17486.860915] perf: interrupt took too long (5132 > 5106), lowering kernel.perf_event_max_sample_rate to 38750 [22022.156828] perf: interrupt took too long (6464 > 6415), lowering kernel.perf_event_max_sample_rate to 30750 [87786.129422] perf: interrupt took too long (8100 > 8080), lowering kernel.perf_event_max_sample_rate to 24500 [94556.487498] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [94556.583287] wlx6c5ab04aa916: authenticate with XXX [94556.595886] wlx6c5ab04aa916: send auth to XXX (try 1/3) [94556.599640] wlx6c5ab04aa916: authenticated [94556.603347] wlx6c5ab04aa916: associate with XXX (try 1/3) [94556.609775] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [94556.612831] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [94556.620188] wlx6c5ab04aa916: associated [94591.863566] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [94591.928590] wlx6c5ab04aa916: authenticate with XXX [94591.932725] wlx6c5ab04aa916: send auth to XXX (try 1/3) [94591.934249] wlx6c5ab04aa916: authenticated [94591.935400] wlx6c5ab04aa916: associate with XXX (try 1/3) [94591.939021] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=3) [94591.939715] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [94591.940521] wlx6c5ab04aa916: associated [94838.396038] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [94838.484830] wlx6c5ab04aa916: authenticate with XXX [94838.488819] wlx6c5ab04aa916: send auth to XXX (try 1/3) [94838.493963] wlx6c5ab04aa916: authenticated [94838.495922] wlx6c5ab04aa916: associate with XXX (try 1/3) [94838.503142] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [94838.503728] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [94838.504295] wlx6c5ab04aa916: associated [94909.036176] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [94909.113004] wlx6c5ab04aa916: authenticate with XXX [94909.117089] wlx6c5ab04aa916: send auth to XXX (try 1/3) [94909.118537] wlx6c5ab04aa916: authenticated [94909.124064] wlx6c5ab04aa916: associate with XXX (try 1/3) [94909.127657] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=3) [94909.128217] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [94909.128660] wlx6c5ab04aa916: associated [95752.281700] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [95752.386781] wlx6c5ab04aa916: authenticate with XXX [95752.390803] wlx6c5ab04aa916: send auth to XXX (try 1/3) [95752.395697] wlx6c5ab04aa916: authenticated [95752.397560] wlx6c5ab04aa916: associate with XXX (try 1/3) [95752.405142] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [95752.406389] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [95752.406918] wlx6c5ab04aa916: associated [95893.457970] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [95893.518876] wlx6c5ab04aa916: authenticate with XXX [95893.522821] wlx6c5ab04aa916: send auth to XXX (try 1/3) [95893.524266] wlx6c5ab04aa916: authenticated [95893.525843] wlx6c5ab04aa916: associate with XXX (try 1/3) [95893.529372] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=8) [95893.529953] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [95893.530396] wlx6c5ab04aa916: associated [96069.910339] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [96070.015147] wlx6c5ab04aa916: authenticate with XXX [96070.019155] wlx6c5ab04aa916: send auth to XXX (try 1/3) [96070.024471] wlx6c5ab04aa916: authenticated [96070.030138] wlx6c5ab04aa916: associate with XXX (try 1/3) [96070.034737] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [96070.035387] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [96070.035911] wlx6c5ab04aa916: associated [96105.298437] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [96105.371279] wlx6c5ab04aa916: authenticate with XXX [96105.375379] wlx6c5ab04aa916: send auth to XXX (try 1/3) [96105.377786] wlx6c5ab04aa916: authenticated [96105.378227] wlx6c5ab04aa916: associate with XXX (try 1/3) [96105.385108] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=8) [96105.385668] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [96105.386118] wlx6c5ab04aa916: associated [104090.952998] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [104091.046060] wlx6c5ab04aa916: authenticate with XXX [104091.050548] wlx6c5ab04aa916: send auth to XXX (try 1/3) [104091.055416] wlx6c5ab04aa916: authenticated [104091.056885] wlx6c5ab04aa916: associate with XXX (try 1/3) [104091.061545] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [104091.062210] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [104091.062732] wlx6c5ab04aa916: associated [104337.549563] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [104337.610266] wlx6c5ab04aa916: authenticate with XXX [104337.614543] wlx6c5ab04aa916: send auth to XXX (try 1/3) [104337.618944] wlx6c5ab04aa916: authenticated [104337.625122] wlx6c5ab04aa916: associate with XXX (try 1/3) [104337.628710] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [104337.629312] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [104337.629756] wlx6c5ab04aa916: associated [106441.039961] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [106441.169502] wlx6c5ab04aa916: authenticate with XXX [106441.173983] wlx6c5ab04aa916: send auth to XXX (try 1/3) [106441.179986] wlx6c5ab04aa916: authenticated [106441.183842] wlx6c5ab04aa916: associate with XXX (try 1/3) [106441.191049] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [106441.191667] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [106441.195021] wlx6c5ab04aa916: associated [106476.476216] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [106476.556972] wlx6c5ab04aa916: authenticate with XXX [106476.560975] wlx6c5ab04aa916: send auth to XXX (try 1/3) [106476.563443] wlx6c5ab04aa916: authenticated [106476.563814] wlx6c5ab04aa916: associate with XXX (try 1/3) [106476.570889] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [106476.571589] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [106476.572034] wlx6c5ab04aa916: associated [106899.112455] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [106899.189098] wlx6c5ab04aa916: authenticate with XXX [106899.193089] wlx6c5ab04aa916: send auth to XXX (try 1/3) [106899.197894] wlx6c5ab04aa916: authenticated [106899.200068] wlx6c5ab04aa916: associate with XXX (try 1/3) [106899.207108] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [106899.207809] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [106899.208350] wlx6c5ab04aa916: associated [106934.468208] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [106934.525211] wlx6c5ab04aa916: authenticate with XXX [106934.529520] wlx6c5ab04aa916: send auth to XXX (try 1/3) [106934.530960] wlx6c5ab04aa916: authenticated [106934.532060] wlx6c5ab04aa916: associate with XXX (try 1/3) [106934.535609] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [106934.536227] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [106934.536660] wlx6c5ab04aa916: associated [108134.313009] usb 4-5: new SuperSpeed USB device number 4 using xhci_hcd [108134.346122] usb 4-5: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10 [108134.346136] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [108134.346142] usb 4-5: Product: USB DISK 3.0 [108134.346147] usb 4-5: Manufacturer: [108134.346151] usb 4-5: SerialNumber: ... [108134.348515] usb-storage 4-5:1.0: USB Mass Storage device detected [108134.348835] scsi host8: usb-storage 4-5:1.0 [108135.359150] scsi 8:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 [108135.359360] sd 8:0:0:0: Attached scsi generic sg4 type 0 [108135.362503] sd 8:0:0:0: [sdd] 244285440 512-byte logical blocks: (125 GB/116 GiB) [108135.363137] sd 8:0:0:0: [sdd] Write Protect is off [108135.363140] sd 8:0:0:0: [sdd] Mode Sense: 45 00 00 00 [108135.363782] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [108135.827889] sdd: [108135.830063] sd 8:0:0:0: [sdd] Attached SCSI removable disk [108220.626783] usb 4-5: USB disconnect, device number 4 [108220.627193] blk_update_request: I/O error, dev sdd, sector 71081414 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0 [108220.627205] Buffer I/O error on dev sdd, logical block 71081414, lost async page write [108220.627234] blk_update_request: I/O error, dev sdd, sector 1 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0 [108220.627240] Buffer I/O error on dev sdd, logical block 1, lost async page write [108220.627326] blk_update_request: I/O error, dev sdd, sector 59778 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0 [108220.627331] Buffer I/O error on dev sdd, logical block 59778, lost async page write [108220.670881] FAT-fs (sdd): unable to read boot sector to mark fs as dirty [110236.791074] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [110236.895766] wlx6c5ab04aa916: authenticate with XXX [110236.900249] wlx6c5ab04aa916: send auth to XXX (try 1/3) [110236.908571] wlx6c5ab04aa916: authenticated [110236.910753] wlx6c5ab04aa916: associate with XXX (try 1/3) [110237.114743] wlx6c5ab04aa916: associate with XXX (try 2/3) [110237.120372] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [110237.120978] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [110237.121501] wlx6c5ab04aa916: associated [110450.495062] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [110450.575937] wlx6c5ab04aa916: authenticate with XXX [110450.579814] wlx6c5ab04aa916: send auth to XXX (try 1/3) [110450.581385] wlx6c5ab04aa916: authenticated [110450.586941] wlx6c5ab04aa916: associate with XXX (try 1/3) [110450.591072] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [110450.591660] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [110450.592134] wlx6c5ab04aa916: associated [110767.667451] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [110767.764132] wlx6c5ab04aa916: authenticate with XXX [110767.768092] wlx6c5ab04aa916: send auth to XXX (try 1/3) [110767.772990] wlx6c5ab04aa916: authenticated [110767.775219] wlx6c5ab04aa916: associate with XXX (try 1/3) [110767.781579] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [110767.782576] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [110767.783098] wlx6c5ab04aa916: associated [110804.095385] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [110804.160067] wlx6c5ab04aa916: authenticate with XXX [110804.164085] wlx6c5ab04aa916: send auth to XXX (try 1/3) [110804.165565] wlx6c5ab04aa916: authenticated [110804.171231] wlx6c5ab04aa916: associate with XXX (try 1/3) [110804.181928] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [110804.183754] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [110804.184257] wlx6c5ab04aa916: associated [111262.331778] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [111262.416547] wlx6c5ab04aa916: authenticate with XXX [111262.420494] wlx6c5ab04aa916: send auth to XXX (try 1/3) [111262.426225] wlx6c5ab04aa916: authenticated [111262.431630] wlx6c5ab04aa916: associate with XXX (try 1/3) [111262.436243] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [111262.436954] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [111262.437478] wlx6c5ab04aa916: associated [111297.723801] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [111297.784866] wlx6c5ab04aa916: authenticate with XXX [111297.788984] wlx6c5ab04aa916: send auth to XXX (try 1/3) [111297.790451] wlx6c5ab04aa916: authenticated [111297.791672] wlx6c5ab04aa916: associate with XXX (try 1/3) [111297.795207] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [111297.795816] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [111297.796248] wlx6c5ab04aa916: associated [114805.196141] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [114805.304872] wlx6c5ab04aa916: authenticate with XXX [114805.308912] wlx6c5ab04aa916: send auth to XXX (try 1/3) [114805.313673] wlx6c5ab04aa916: authenticated [114805.315839] wlx6c5ab04aa916: associate with XXX (try 1/3) [114805.320528] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [114805.321213] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [114805.321736] wlx6c5ab04aa916: associated [114911.144121] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [114911.200828] wlx6c5ab04aa916: authenticate with XXX [114911.204885] wlx6c5ab04aa916: send auth to XXX (try 1/3) [114911.206368] wlx6c5ab04aa916: authenticated [114911.207914] wlx6c5ab04aa916: associate with XXX (try 1/3) [114911.211448] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [114911.212018] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [114911.212468] wlx6c5ab04aa916: associated [115859.549082] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [115859.654161] wlx6c5ab04aa916: authenticate with XXX [115859.658189] wlx6c5ab04aa916: send auth to XXX (try 1/3) [115859.662961] wlx6c5ab04aa916: authenticated [115859.668937] wlx6c5ab04aa916: associate with XXX (try 1/3) [115859.673614] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [115859.674370] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [115859.674892] wlx6c5ab04aa916: associated [116000.621250] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [116000.705864] wlx6c5ab04aa916: authenticate with XXX [116000.709880] wlx6c5ab04aa916: send auth to XXX (try 1/3) [116000.716376] wlx6c5ab04aa916: authenticated [116000.717128] wlx6c5ab04aa916: associate with XXX (try 1/3) [116000.720752] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [116000.721366] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [116000.721835] wlx6c5ab04aa916: associated [116459.989829] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [116460.074542] wlx6c5ab04aa916: authenticate with XXX [116460.078635] wlx6c5ab04aa916: send auth to XXX (try 1/3) [116460.084921] wlx6c5ab04aa916: authenticated [116460.089709] wlx6c5ab04aa916: associate with XXX (try 1/3) [116460.094336] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [116460.095215] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [116460.096595] wlx6c5ab04aa916: associated [116495.369844] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [116495.470842] wlx6c5ab04aa916: authenticate with XXX [116495.474774] wlx6c5ab04aa916: send auth to XXX (try 1/3) [116495.477072] wlx6c5ab04aa916: authenticated [116495.481716] wlx6c5ab04aa916: associate with XXX (try 1/3) [116495.485252] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [116495.485814] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [116495.486281] wlx6c5ab04aa916: associated [117865.444004] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [117865.580497] wlx6c5ab04aa916: authenticate with XXX [117865.584418] wlx6c5ab04aa916: send auth to XXX (try 1/3) [117865.791593] wlx6c5ab04aa916: send auth to XXX (try 2/3) [117865.794867] wlx6c5ab04aa916: authenticated [117865.795627] wlx6c5ab04aa916: associate with XXX (try 1/3) [117865.803135] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [117865.803817] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [117865.804349] wlx6c5ab04aa916: associated [117959.275872] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [117959.320879] wlx6c5ab04aa916: authenticate with XXX [117959.324835] wlx6c5ab04aa916: send auth to XXX (try 1/3) [117959.326323] wlx6c5ab04aa916: authenticated [117959.331751] wlx6c5ab04aa916: associate with XXX (try 1/3) [117959.335292] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [117959.335978] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [117959.336417] wlx6c5ab04aa916: associated [118029.896020] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [118029.980625] wlx6c5ab04aa916: authenticate with XXX [118029.984742] wlx6c5ab04aa916: send auth to XXX (try 1/3) [118029.989518] wlx6c5ab04aa916: authenticated [118029.991803] wlx6c5ab04aa916: associate with XXX (try 1/3) [118029.999123] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [118029.999884] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [118030.000467] wlx6c5ab04aa916: associated [118065.256055] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [118065.349429] wlx6c5ab04aa916: authenticate with XXX [118065.353447] wlx6c5ab04aa916: send auth to XXX (try 1/3) [118065.354892] wlx6c5ab04aa916: authenticated [118065.360028] wlx6c5ab04aa916: associate with XXX (try 1/3) [118065.363634] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [118065.364237] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [118065.364691] wlx6c5ab04aa916: associated [118558.736703] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [118558.821711] wlx6c5ab04aa916: authenticate with XXX [118558.825770] wlx6c5ab04aa916: send auth to XXX (try 1/3) [118558.830586] wlx6c5ab04aa916: authenticated [118558.836511] wlx6c5ab04aa916: associate with XXX (try 1/3) [118558.841150] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [118558.841802] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [118558.842330] wlx6c5ab04aa916: associated [118629.436726] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [118629.481440] wlx6c5ab04aa916: authenticate with XXX [118629.485468] wlx6c5ab04aa916: send auth to XXX (try 1/3) [118629.486993] wlx6c5ab04aa916: authenticated [118629.488605] wlx6c5ab04aa916: associate with XXX (try 1/3) [118629.493956] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [118629.494852] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [118629.495294] wlx6c5ab04aa916: associated [120733.991428] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [120734.200494] wlx6c5ab04aa916: authenticate with XXX [120734.204446] wlx6c5ab04aa916: send auth to XXX (try 1/3) [120734.210278] wlx6c5ab04aa916: authenticated [120734.211309] wlx6c5ab04aa916: associate with XXX (try 1/3) [120734.215966] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [120734.216590] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [120734.217136] wlx6c5ab04aa916: associated [120769.491532] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [120769.556345] wlx6c5ab04aa916: authenticate with XXX [120769.560314] wlx6c5ab04aa916: send auth to XXX (try 1/3) [120769.561773] wlx6c5ab04aa916: authenticated [120769.563359] wlx6c5ab04aa916: associate with XXX (try 1/3) [120769.566913] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [120769.567545] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [120769.567991] wlx6c5ab04aa916: associated [129624.172601] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [129624.257527] wlx6c5ab04aa916: authenticate with XXX [129624.261429] wlx6c5ab04aa916: send auth to XXX (try 1/3) [129624.266443] wlx6c5ab04aa916: authenticated [129624.268523] wlx6c5ab04aa916: associate with XXX (try 1/3) [129624.273147] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x431 status=0 aid=1) [129624.274167] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [129624.274691] wlx6c5ab04aa916: associated [129659.572698] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [129659.637348] wlx6c5ab04aa916: authenticate with XXX [129659.641332] wlx6c5ab04aa916: send auth to XXX (try 1/3) [129659.643940] wlx6c5ab04aa916: authenticated [129659.648532] wlx6c5ab04aa916: associate with XXX (try 1/3) [129659.654687] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=7) [129659.655370] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [129659.655813] wlx6c5ab04aa916: associated [148555.647884] kig[51531]: segfault at 0 ip 000055f7a80d05c8 sp 00007ffc6c70efd8 error 4 in kig[55f7a80cb000+9000] [148555.647901] Code: fa 49 89 c4 e9 45 c3 ff ff f3 0f 1e fa 48 89 c3 e9 44 c3 ff ff 90 66 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 8b 7f 50 <48> 8b 07 ff a0 e0 00 00 00 90 66 66 2e 0f 1f 84 00 00 00 00 00 0f [168117.822184] wlx6c5ab04aa916: deauthenticated from XXX (Reason: 16=GROUP_KEY_HANDSHAKE_TIMEOUT) [168118.129423] wlx6c5ab04aa916: authenticate with XXX [168118.136977] wlx6c5ab04aa916: send auth to XXX (try 1/3) [168118.141913] wlx6c5ab04aa916: authenticated [168118.148938] wlx6c5ab04aa916: associate with XXX (try 1/3) [168118.158907] wlx6c5ab04aa916: RX AssocResp from XXX (capab=0x431 status=0 aid=1) [168118.159513] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [168118.160034] wlx6c5ab04aa916: associated [168153.429193] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [168153.502110] wlx6c5ab04aa916: authenticate with XXX [168153.506150] wlx6c5ab04aa916: send auth to XXX (try 1/3) [168153.507593] wlx6c5ab04aa916: authenticated [168153.508992] wlx6c5ab04aa916: associate with XXX (try 1/3) [168153.512616] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=10) [168153.513243] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [168153.513687] wlx6c5ab04aa916: associated [227783.100600] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [227783.204351] wlx6c5ab04aa916: authenticate with XXX [227783.215348] wlx6c5ab04aa916: send auth to XXX (try 1/3) [227783.416377] wlx6c5ab04aa916: send auth to XXX (try 2/3) [227783.620387] wlx6c5ab04aa916: send auth to XXX (try 3/3) [227783.828387] wlx6c5ab04aa916: authentication with XXX timed out [227784.037107] wlx6c5ab04aa916: authenticate with XXX [227784.044652] wlx6c5ab04aa916: send auth to XXX (try 1/3) [227784.252405] wlx6c5ab04aa916: send auth to XXX (try 2/3) [227784.257368] wlx6c5ab04aa916: authenticated [227784.260414] wlx6c5ab04aa916: associate with XXX (try 1/3) [227784.464431] wlx6c5ab04aa916: associate with XXX (try 2/3) [227784.473981] wlx6c5ab04aa916: RX AssocResp from XXX (capab=0x411 status=0 aid=7) [227784.474818] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [227784.475337] wlx6c5ab04aa916: associated [235158.000839] wlx6c5ab04aa916: authenticate with XXX [235158.008274] wlx6c5ab04aa916: send auth to XXX (try 1/3) [235158.011634] wlx6c5ab04aa916: authenticated [235158.012291] wlx6c5ab04aa916: associate with XXX (try 1/3) [235158.017547] wlx6c5ab04aa916: RX AssocResp from XXX (capab=0x431 status=0 aid=2) [235158.018384] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [235158.018954] wlx6c5ab04aa916: associated [235164.012597] wlx6c5ab04aa916: disassociated from XXX (Reason: 8=DISASSOC_STA_HAS_LEFT) [235165.368950] wlx6c5ab04aa916: authenticate with XXX [235165.376519] wlx6c5ab04aa916: send auth to XXX (try 1/3) [235165.584334] wlx6c5ab04aa916: send auth to XXX (try 2/3) [235165.788330] wlx6c5ab04aa916: send auth to XXX (try 3/3) [235165.992315] wlx6c5ab04aa916: authentication with XXX timed out [235172.776898] wlx6c5ab04aa916: authenticate with XXX [235172.784386] wlx6c5ab04aa916: send auth to XXX (try 1/3) [235172.835069] wlx6c5ab04aa916: authenticated [235172.836315] wlx6c5ab04aa916: associate with XXX (try 1/3) [235172.842629] wlx6c5ab04aa916: RX AssocResp from XXX (capab=0x431 status=0 aid=4) [235172.843458] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [235172.843981] wlx6c5ab04aa916: associated [235208.184485] wlx6c5ab04aa916: disconnect from AP XXX for new auth to XXX [235208.253222] wlx6c5ab04aa916: authenticate with XXX [235208.259055] wlx6c5ab04aa916: send auth to XXX (try 1/3) [235208.260668] wlx6c5ab04aa916: authenticated [235208.264313] wlx6c5ab04aa916: associate with XXX (try 1/3) [235208.272511] wlx6c5ab04aa916: RX ReassocResp from XXX (capab=0x411 status=0 aid=5) [235208.273130] usb 3-3.3: rtl8xxxu_bss_info_changed: HT supported [235208.273566] wlx6c5ab04aa916: associated [419447.968378] perf: interrupt took too long (10204 > 10125), lowering kernel.perf_event_max_sample_rate to 19500 [446916.171592] ntfs3: Max link count 4000 [446916.171596] ntfs3: Enabled Linux POSIX ACLs support [446916.171597] ntfs3: Read-only LZX/Xpress compression included [446916.172164] ntfs3: Unknown parameter 'windows_names' [536765.200576] usb 4-5: new SuperSpeed USB device number 5 using xhci_hcd [536765.237009] usb 4-5: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10 [536765.237014] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [536765.237015] usb 4-5: Product: USB DISK 3.0 [536765.237017] usb 4-5: Manufacturer: [536765.237018] usb 4-5: SerialNumber: ... [536765.238575] usb-storage 4-5:1.0: USB Mass Storage device detected [536765.238656] scsi host8: usb-storage 4-5:1.0 [536766.258098] scsi 8:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 [536766.258321] sd 8:0:0:0: Attached scsi generic sg4 type 0 [536766.258532] sd 8:0:0:0: [sdd] 244285440 512-byte logical blocks: (125 GB/116 GiB) [536766.259163] sd 8:0:0:0: [sdd] Write Protect is off [536766.259167] sd 8:0:0:0: [sdd] Mode Sense: 45 00 00 00 [536766.259796] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [536766.292361] sdd: [536766.294314] sd 8:0:0:0: [sdd] Attached SCSI removable disk [536772.027654] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [536879.276956] sdd: detected capacity change from 244285440 to 0 [536879.283189] Thunar[1621]: segfault at 18 ip 000055f41da47335 sp 00007ffdb6aad190 error 4 in thunar[55f41d9f0000+7f000] [536879.283207] Code: fe ff ff 4c 63 c2 49 89 c1 eb ae e8 45 16 fb ff 0f 1f 44 00 00 41 54 55 48 83 ec 38 64 48 8b 04 25 28 00 00 00 48 89 44 24 28 <48> 8b 47 18 48 85 c0 74 52 48 89 fd 31 ff eb 0f 0f 1f 00 48 8b 40 [536891.201071] usb 4-5: USB disconnect, device number 5 [538008.675169] usb 4-5: new SuperSpeed USB device number 6 using xhci_hcd [538008.708224] usb 4-5: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10 [538008.708229] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [538008.708230] usb 4-5: Product: USB DISK 3.0 [538008.708232] usb 4-5: Manufacturer: [538008.708233] usb 4-5: SerialNumber: ... [538008.709763] usb-storage 4-5:1.0: USB Mass Storage device detected [538008.709872] scsi host8: usb-storage 4-5:1.0 [538009.741414] scsi 8:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 [538009.741676] sd 8:0:0:0: Attached scsi generic sg4 type 0 [538009.741906] sd 8:0:0:0: [sdd] 244285440 512-byte logical blocks: (125 GB/116 GiB) [538009.742541] sd 8:0:0:0: [sdd] Write Protect is off [538009.742543] sd 8:0:0:0: [sdd] Mode Sense: 45 00 00 00 [538009.743974] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [538009.782197] sdd: [538009.784057] sd 8:0:0:0: [sdd] Attached SCSI removable disk [538014.988172] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [538298.687003] sdd: detected capacity change from 244285440 to 0 [538310.812329] usb 4-5: USB disconnect, device number 6 [624901.965048] usb 4-5: new SuperSpeed USB device number 7 using xhci_hcd [624901.998202] usb 4-5: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10 [624901.998207] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [624901.998208] usb 4-5: Product: USB DISK 3.0 [624901.998210] usb 4-5: Manufacturer: [624901.998211] usb 4-5: SerialNumber: ... [624901.999854] usb-storage 4-5:1.0: USB Mass Storage device detected [624902.000155] scsi host8: usb-storage 4-5:1.0 [624903.027241] scsi 8:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 [624903.027506] sd 8:0:0:0: Attached scsi generic sg4 type 0 [624903.029674] sd 8:0:0:0: [sdd] 244285440 512-byte logical blocks: (125 GB/116 GiB) [624903.030982] sd 8:0:0:0: [sdd] Write Protect is off [624903.030985] sd 8:0:0:0: [sdd] Mode Sense: 45 00 00 00 [624903.031613] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [624903.087453] sdd: [624903.089411] sd 8:0:0:0: [sdd] Attached SCSI removable disk [624909.026013] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [625019.056194] sdd: detected capacity change from 244285440 to 0 [625030.427069] usb 4-5: USB disconnect, device number 7 [632572.114818] usb 4-5: new SuperSpeed USB device number 8 using xhci_hcd [632572.147910] usb 4-5: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10 [632572.147914] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [632572.147915] usb 4-5: Product: USB DISK 3.0 [632572.147917] usb 4-5: Manufacturer: [632572.147918] usb 4-5: SerialNumber: ... [632572.149687] usb-storage 4-5:1.0: USB Mass Storage device detected [632572.149799] scsi host8: usb-storage 4-5:1.0 [632573.164998] scsi 8:0:0:0: Direct-Access USB DISK 3.0 PMAP PQ: 0 ANSI: 6 [632573.165181] sd 8:0:0:0: Attached scsi generic sg4 type 0 [632573.165420] sd 8:0:0:0: [sdd] 244285440 512-byte logical blocks: (125 GB/116 GiB) [632573.166057] sd 8:0:0:0: [sdd] Write Protect is off [632573.166060] sd 8:0:0:0: [sdd] Mode Sense: 45 00 00 00 [632573.166692] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [632573.231197] sdd: [632573.234812] sd 8:0:0:0: [sdd] Attached SCSI removable disk [632579.023871] FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [632706.447374] sdd: detected capacity change from 244285440 to 0 [632712.831696] usb 4-5: USB disconnect, device number 8 [640300.615975] perf: interrupt took too long (12788 > 12755), lowering kernel.perf_event_max_sample_rate to 15500 [671228.025553] usb 3-7: USB disconnect, device number 4