[ 0.000000] Linux version 4.15.0-desktop-60.7rosa-x86_64 (XXX@XXX) (gcc version 5.5.0 20171010 (ROSA) (Linaro GCC 5.5-2017.10)) #1 SMP PREEMPT Tue Sep 3 19:40:41 UTC 2019 () [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-desktop-60.7rosa-x86_64 root=UUID=HASH_F0F-A31F-D5FB-11AD-249285377AB1 ro splash=silent logo.nologo quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffadfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bffae000-0x00000000bffeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: MSI MS-7592/G41M-P33 Combo(MS-7592), BIOS V32.12 09/13/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] BRK [0x3c169000, 0x3c169fff] PGTABLE [ 0.000000] BRK [0x3c16a000, 0x3c16afff] PGTABLE [ 0.000000] BRK [0x3c16b000, 0x3c16bfff] PGTABLE [ 0.000000] BRK [0x3c16c000, 0x3c16cfff] PGTABLE [ 0.000000] BRK [0x3c16d000, 0x3c16dfff] PGTABLE [ 0.000000] BRK [0x3c16e000, 0x3c16efff] PGTABLE [ 0.000000] RAMDISK: [mem 0x302e7000-0x3416afff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F94F0 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x00000000BFFA0000 000040 (v01 7592MS A7592700 20130913 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000BFFA0200 000084 (v01 7592MS A7592700 20130913 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x00000000BFFA05C0 00610D (v01 A7592 A7592700 00000700 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BFFAE000 000040 [ 0.000000] ACPI: APIC 0x00000000BFFA0390 00006C (v01 7592MS A7592700 20130913 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000BFFA0400 00003C (v01 7592MS OEMMCFG 20130913 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000BFFAE040 000072 (v01 7592MS A7592700 20130913 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BFFA85C0 000038 (v01 7592MS OEMHPET 20130913 MSFT 00000097) [ 0.000000] ACPI: GSCI 0x00000000BFFAE0C0 002024 (v01 7592MS GMCHSCI 20130913 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000BFFB0570 000A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bff9ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0xbff75000-0xbff9ffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000bff9ffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff9ffff] [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bff9ffff] [ 0.000000] On node 0 totalpages: 786238 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12223 pages used for memmap [ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x524 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 773930 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-desktop-60.7rosa-x86_64 root=UUID=HASH_F0F-A31F-D5FB-11AD-249285377AB1 ro splash=silent logo.nologo quiet [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3002620K/3144952K available (12300K kernel code, 2710K rwdata, 4108K rodata, 2356K init, 2400K bss, 142332K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 38934 entries in 153 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.016666] tsc: Fast TSC calibration using PIT [ 0.019999] tsc: Detected 2133.191 MHz processor [ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4268.14 BogoMIPS (lpj=7110636) [ 0.019999] pid_max: default: 32768 minimum: 301 [ 0.019999] Security Framework initialized [ 0.019999] Yama: becoming mindful. [ 0.019999] SELinux: Disabled at boot. [ 0.025503] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.027022] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.027115] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027163] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027551] CPU0: Thermal monitoring enabled (TM2) [ 0.027555] process: using mwait in idle threads [ 0.027561] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.027562] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.027564] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.027566] Spectre V2 : Mitigation: Full generic retpoline [ 0.027567] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.027568] Speculative Store Bypass: Vulnerable [ 0.027610] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.027849] Freeing SMP alternatives memory: 32K [ 0.033333] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms [ 0.033333] APIC delta adjusted to PM-Timer: 1666643 (1999968) [ 0.033333] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (family: 0x6, model: 0xf, stepping: 0x6) [ 0.043347] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.043357] core: PEBS disabled due to CPU errata [ 0.043360] ... version: 2 [ 0.043362] ... bit width: 40 [ 0.043363] ... generic registers: 2 [ 0.043365] ... value mask: 000000ffffffffff [ 0.043366] ... max period: 000000007fffffff [ 0.043367] ... fixed-purpose events: 3 [ 0.043368] ... event mask: 0000000700000003 [ 0.046678] Hierarchical SRCU implementation. [ 0.053544] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.056682] smp: Bringing up secondary CPUs ... [ 0.076697] x86: Booting SMP configuration: [ 0.076699] .... node #0, CPUs: #1 [ 0.080014] smp: Brought up 1 node, 2 CPUs [ 0.080017] smpboot: Max logical packages: 2 [ 0.080020] smpboot: Total of 2 processors activated (8536.29 BogoMIPS) [ 0.081446] devtmpfs: initialized [ 0.081446] x86/mm: Memory block size: 128MB [ 0.081446] evm: security.selinux [ 0.081446] evm: security.SMACK64 [ 0.081446] evm: security.SMACK64EXEC [ 0.081446] evm: security.SMACK64TRANSMUTE [ 0.081446] evm: security.SMACK64MMAP [ 0.081446] evm: security.ima [ 0.081446] evm: security.capability [ 0.081446] PM: Registering ACPI NVS region [mem 0xbffae000-0xbffeffff] (270336 bytes) [ 0.081446] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.081446] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.081446] pinctrl core: initialized pinctrl subsystem [ 0.081446] RTC time: 14:44:25, date: 10/25/19 [ 0.081446] NET: Registered protocol family 16 [ 0.083352] cpuidle: using governor ladder [ 0.090013] cpuidle: using governor menu [ 0.090082] ACPI: bus type PCI registered [ 0.090085] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.090190] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.090194] PCI: not using MMCONFIG [ 0.090195] PCI: Using configuration type 1 for base access [ 0.090241] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.090241] mtrr: probably your BIOS does not setup all CPUs. [ 0.090241] mtrr: corrected configuration. [ 0.091844] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.091844] ACPI: Added _OSI(Module Device) [ 0.091844] ACPI: Added _OSI(Processor Device) [ 0.091844] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.091844] ACPI: Added _OSI(Processor Aggregator Device) [ 0.091844] ACPI: Added _OSI(Linux-Dell-Video) [ 0.091844] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.091844] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.091844] ACPI: Executed 1 blocks of module-level executable AML code [ 0.098653] ACPI: Dynamic OEM Table Load: [ 0.098661] ACPI: SSDT 0xFFFF8BC03B9B4C00 000235 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.099266] ACPI: Dynamic OEM Table Load: [ 0.099273] ACPI: SSDT 0xFFFF8BC03B9B7800 000235 (v01 DpgPmm P002Ist 00000012 INTL 20051117) [ 0.100187] ACPI: Interpreter enabled [ 0.100212] ACPI: (supports S0 S1 S4 S5) [ 0.100214] ACPI: Using IOAPIC for interrupt routing [ 0.100260] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.102450] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.102470] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.102911] ACPI: GPE 0x1B active on init [ 0.102925] ACPI: Enabled 12 GPEs in block 00 to 1F [ 0.115043] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.115050] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.115057] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.115508] PCI host bridge to bus 0000:00 [ 0.115511] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.115513] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.115515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.115517] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.115518] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] [ 0.115520] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window] [ 0.115522] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.115533] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 [ 0.115561] DMAR: Forcing write-buffer flush capability [ 0.115562] DMAR: Disabling IOMMU for graphics on this chipset [ 0.115677] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400 [ 0.115724] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.115873] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.115895] pci 0000:00:1b.0: reg 0x10: [mem 0xf7ffc000-0xf7ffffff 64bit] [ 0.115967] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.116085] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.116157] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.116286] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.116362] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.116494] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.116536] pci 0000:00:1d.0: reg 0x20: [io 0xdc00-0xdc1f] [ 0.116685] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.116728] pci 0000:00:1d.1: reg 0x20: [io 0xd880-0xd89f] [ 0.116866] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.116908] pci 0000:00:1d.2: reg 0x20: [io 0xd800-0xd81f] [ 0.117046] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.117088] pci 0000:00:1d.3: reg 0x20: [io 0xd480-0xd49f] [ 0.117229] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.117250] pci 0000:00:1d.7: reg 0x10: [mem 0xf7ffbc00-0xf7ffbfff] [ 0.117329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.117446] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.117607] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.117691] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.117695] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.117699] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.117702] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017) [ 0.117705] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff) [ 0.117836] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.117853] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.117862] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.117870] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] [ 0.117879] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb] [ 0.117888] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.117906] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.117908] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.117909] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.117911] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.118031] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.118047] pci 0000:00:1f.2: reg 0x10: [io 0xd400-0xd407] [ 0.118055] pci 0000:00:1f.2: reg 0x14: [io 0xd080-0xd083] [ 0.118062] pci 0000:00:1f.2: reg 0x18: [io 0xd000-0xd007] [ 0.118069] pci 0000:00:1f.2: reg 0x1c: [io 0xcc00-0xcc03] [ 0.118077] pci 0000:00:1f.2: reg 0x20: [io 0xc880-0xc88f] [ 0.118114] pci 0000:00:1f.2: PME# supported from D3hot [ 0.118228] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.118282] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.118455] pci 0000:01:00.0: [10de:0140] type 00 class 0x030000 [ 0.118470] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff] [ 0.118480] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.118490] pci 0000:01:00.0: reg 0x1c: [mem 0xfd000000-0xfdffffff 64bit] [ 0.118502] pci 0000:01:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.118586] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.118593] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.118597] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfebfffff] [ 0.118601] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.118649] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.118719] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000 [ 0.118747] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe8ff] [ 0.118774] pci 0000:03:00.0: reg 0x18: [mem 0xf6fff000-0xf6ffffff 64bit pref] [ 0.118791] pci 0000:03:00.0: reg 0x20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref] [ 0.118885] pci 0000:03:00.0: supports D1 D2 [ 0.118887] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.126693] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.126698] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.126706] pci 0000:00:1c.1: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.126796] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.126807] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.126810] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.126812] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.126815] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.126817] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode) [ 0.126820] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode) [ 0.128144] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.128256] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.128366] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.128476] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.128585] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.128695] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.128805] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.128916] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.129373] SCSI subsystem initialized [ 0.129453] libata version 3.00 loaded. [ 0.129476] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.129476] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.129476] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.129476] vgaarb: loaded [ 0.129476] ACPI: bus type USB registered [ 0.129476] usbcore: registered new interface driver usbfs [ 0.129476] usbcore: registered new interface driver hub [ 0.129476] usbcore: registered new device driver usb [ 0.129476] EDAC MC: Ver: 3.0.0 [ 0.129476] PCI: Using ACPI for IRQ routing [ 0.132558] PCI: pci_cache_line_size set to 64 bytes [ 0.132603] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.132605] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff] [ 0.133334] NetLabel: Initializing [ 0.133334] NetLabel: domain hash size = 128 [ 0.133334] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.133334] NetLabel: unlabeled traffic allowed by default [ 0.133876] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.133881] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.133886] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.136708] clocksource: Switched to clocksource hpet [ 0.157696] VFS: Disk quotas dquot_6.6.0 [ 0.157726] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.157844] pnp: PnP ACPI init [ 0.157988] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.157991] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.157998] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.158116] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.158512] pnp 00:02: [dma 0 disabled] [ 0.158593] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.159237] pnp 00:03: [dma 0 disabled] [ 0.159405] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.159635] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.159638] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.159640] system 00:04: [io 0x0480-0x04bf] has been reserved [ 0.159642] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.159644] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.159647] system 00:04: [mem 0xffa00000-0xffffffff] could not be reserved [ 0.159653] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.159828] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved [ 0.159834] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.160051] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.160054] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.160060] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.160142] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.160251] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.160452] system 00:09: [io 0x0a00-0x0adf] has been reserved [ 0.160455] system 00:09: [io 0x0ae0-0x0aef] has been reserved [ 0.160461] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.160588] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved [ 0.160594] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.160938] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.160941] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.160943] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.160945] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.160951] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.161191] pnp: PnP ACPI: found 12 devices [ 0.168351] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.168373] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.168376] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.168379] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.168387] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000 [ 0.168403] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 0.168409] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.168412] pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0400000-0xc07fffff] [ 0.168415] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.168419] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.168423] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfebfffff] [ 0.168425] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.168429] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.168432] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.168436] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 0.168440] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.168445] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.168448] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.168452] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc07fffff] [ 0.168456] pci 0000:00:1c.1: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.168461] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.168472] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.168474] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.168476] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.168477] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.168479] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window] [ 0.168481] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window] [ 0.168483] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfebfffff] [ 0.168485] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 0.168487] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.168489] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff] [ 0.168490] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 0.168492] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.168494] pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc07fffff] [ 0.168496] pci_bus 0000:03: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.168498] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.168499] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.168501] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.168503] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.168505] pci_bus 0000:04: resource 8 [mem 0xc0000000-0xdfffffff window] [ 0.168507] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff window] [ 0.168627] NET: Registered protocol family 2 [ 0.169026] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.169180] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.169426] TCP: Hash tables configured (established 32768 bind 32768) [ 0.169499] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.169532] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.169613] NET: Registered protocol family 1 [ 0.170615] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.170620] PCI: CLS 32 bytes, default 64 [ 0.170684] Unpacking initramfs... [ 1.169061] Freeing initrd memory: 64016K [ 1.169309] Scanning for low memory corruption every 60 seconds [ 1.170217] Initialise system trusted keyrings [ 1.170235] Key type blacklist registered [ 1.170330] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.172328] zbud: loaded [ 1.173031] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.173258] fuse init (API version 7.26) [ 1.175429] Key type asymmetric registered [ 1.175431] Asymmetric key parser 'x509' registered [ 1.175494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.175542] io scheduler noop registered [ 1.175544] io scheduler deadline registered [ 1.175584] io scheduler cfq registered (default) [ 1.175618] io scheduler bfq registered [ 1.176022] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) [ 1.176507] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.176508] vesafb: scrolling: redraw [ 1.176510] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.176528] vesafb: framebuffer at 0xd8000000, mapped to 0x (ptrval), using 3072k, total 3072k [ 1.200522] Console: switching to colour frame buffer device 128x48 [ 1.224324] fb0: VESA VGA frame buffer device [ 1.224346] intel_idle: does not run on family 6 model 15 [ 1.224478] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.224514] ACPI: Power Button [PWRB] [ 1.224572] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.224595] ACPI: Power Button [PWRF] [ 1.224995] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.245594] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.248540] Linux agpgart interface v0.103 [ 1.250867] loop: module loaded [ 1.251046] ata_piix 0000:00:1f.1: version 2.13 [ 1.252861] scsi host0: ata_piix [ 1.253031] scsi host1: ata_piix [ 1.253087] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.253089] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.253214] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.258420] scsi host2: ata_piix [ 1.258596] scsi host3: ata_piix [ 1.258675] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19 [ 1.258676] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19 [ 1.258813] libphy: Fixed MDIO Bus: probed [ 1.258815] tun: Universal TUN/TAP device driver, 1.6 [ 1.258880] PPP generic driver version 2.4.2 [ 1.258945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.258960] ehci-pci: EHCI PCI platform driver [ 1.259111] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.259119] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.259132] ehci-pci 0000:00:1d.7: debug port 1 [ 1.263045] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.263059] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7ffbc00 [ 1.273414] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.273552] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.273556] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.273561] usb usb1: Product: EHCI Host Controller [ 1.273565] usb usb1: Manufacturer: Linux 4.15.0-desktop-60.7rosa-x86_64 ehci_hcd [ 1.273568] usb usb1: SerialNumber: ... [ 1.273728] hub 1-0:1.0: USB hub found [ 1.273738] hub 1-0:1.0: 8 ports detected [ 1.273988] ehci-platform: EHCI generic platform driver [ 1.274003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.274007] ohci-pci: OHCI PCI platform driver [ 1.274019] ohci-platform: OHCI generic platform driver [ 1.274029] uhci_hcd: USB Universal Host Controller Interface driver [ 1.274137] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.274144] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.274151] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.274169] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00 [ 1.274226] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.274228] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.274230] usb usb2: Product: UHCI Host Controller [ 1.274232] usb usb2: Manufacturer: Linux 4.15.0-desktop-60.7rosa-x86_64 uhci_hcd [ 1.274233] usb usb2: SerialNumber: ... [ 1.274355] hub 2-0:1.0: USB hub found [ 1.274363] hub 2-0:1.0: 2 ports detected [ 1.274571] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.274580] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.274586] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.274604] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 [ 1.274658] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.274660] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.274662] usb usb3: Product: UHCI Host Controller [ 1.274664] usb usb3: Manufacturer: Linux 4.15.0-desktop-60.7rosa-x86_64 uhci_hcd [ 1.274666] usb usb3: SerialNumber: ... [ 1.274791] hub 3-0:1.0: USB hub found [ 1.274799] hub 3-0:1.0: 2 ports detected [ 1.275005] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.275011] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.275017] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.275047] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 1.275102] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.275104] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.275106] usb usb4: Product: UHCI Host Controller [ 1.275107] usb usb4: Manufacturer: Linux 4.15.0-desktop-60.7rosa-x86_64 uhci_hcd [ 1.275109] usb usb4: SerialNumber: ... [ 1.275226] hub 4-0:1.0: USB hub found [ 1.275234] hub 4-0:1.0: 2 ports detected [ 1.275438] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.275444] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.275450] uhci_hcd 0000:00:1d.3: detected 2 ports [ 1.275475] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480 [ 1.275531] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.275533] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.275535] usb usb5: Product: UHCI Host Controller [ 1.275537] usb usb5: Manufacturer: Linux 4.15.0-desktop-60.7rosa-x86_64 uhci_hcd [ 1.275539] usb usb5: SerialNumber: ... [ 1.275653] hub 5-0:1.0: USB hub found [ 1.275661] hub 5-0:1.0: 2 ports detected [ 1.275861] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.276236] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.276279] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.276401] mousedev: PS/2 mouse device common for all mice [ 1.276591] rtc_cmos 00:01: RTC can wake from S4 [ 1.276726] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.276749] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.276761] i2c /dev entries driver [ 1.276838] device-mapper: uevent: version 1.0.3 [ 1.276921] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: XXX@XXX [ 1.276950] ledtrig-cpu: registered to indicate activity on CPUs [ 1.277419] NET: Registered protocol family 10 [ 1.284838] Segment Routing with IPv6 [ 1.284875] NET: Registered protocol family 17 [ 1.284940] Key type dns_resolver registered [ 1.285168] mce: Using 6 MCE banks [ 1.285187] RAS: Correctable Errors collector initialized. [ 1.285239] microcode: sig=0x6f6, pf=0x1, revision=0xd0 [ 1.285292] microcode: Microcode Update Driver: v2.2. [ 1.285306] sched_clock: Marking stable (1285286300, 0)->(1401894462, -116608162) [ 1.285534] registered taskstats version 1 [ 1.285551] Loading compiled-in X.509 certificates [ 1.285573] zswap: loaded using pool lzo/zbud [ 1.290089] Key type big_key registered [ 1.290095] Key type trusted registered [ 1.292256] Key type encrypted registered [ 1.292261] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.292270] ima: Allocated hash algorithm: sha1 [ 1.292297] evm: HMAC attrs: 0x1 [ 1.292581] Magic number: 7:74:739 [ 1.292741] rtc_cmos 00:01: setting system clock to 2019-10-25 14:44:26 UTC (1572014666) [ 1.293526] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.293527] EDD information not available. [ 1.298650] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.409405] ata1.00: ATA-6: WDC WD800BB-75JHC0, 06.01C06, max UDMA/100 [ 1.409408] ata1.00: 156250000 sectors, multi 16: LBA [ 1.409414] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.419394] ata3.00: ATA-8: WDC WD2500AAKX-00ERMA0, 15.01H15, max UDMA/133 [ 1.419396] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.421154] ata1.00: configured for UDMA/33 [ 1.421288] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-75JH 1C06 PQ: 0 ANSI: 5 [ 1.421487] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.421499] sd 0:0:0:0: [sda] Write Protect is off [ 1.421502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.421519] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.421537] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.424111] ata3.00: configured for UDMA/133 [ 1.431215] scsi 2:0:0:0: Direct-Access ATA WDC WD2500AAKX-0 1H15 PQ: 0 ANSI: 5 [ 1.431396] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.431405] sd 2:0:0:0: [sdb] Write Protect is off [ 1.431407] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.431419] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.431610] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.464482] ata4.00: ATA-8: WDC WD10EARX-00N0YB0, 51.0AB51, max UDMA/133 [ 1.464485] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.464493] ata4.01: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN00, max UDMA/133 [ 1.487208] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 1.487505] ata4.00: configured for UDMA/133 [ 1.487883] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.498544] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.499069] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.510167] ata4.01: configured for UDMA/133 [ 1.510798] scsi 3:0:0:0: Direct-Access ATA WDC WD10EARX-00N AB51 PQ: 0 ANSI: 5 [ 1.510978] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.510980] sd 3:0:0:0: [sdc] 4096-byte physical blocks [ 1.510989] sd 3:0:0:0: [sdc] Write Protect is off [ 1.510991] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.511003] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.511018] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.518863] scsi 3:0:1:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN00 PQ: 0 ANSI: 5 [ 1.606738] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.607870] sr 3:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.607872] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.608118] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 1.608183] sr 3:0:1:0: Attached scsi generic sg3 type 5 [ 1.751092] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1.751908] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.756098] Freeing unused kernel image memory: 2356K [ 1.756160] Write protecting the kernel read-only data: 20480k [ 1.757391] Freeing unused kernel image memory: 2012K [ 1.758320] Freeing unused kernel image memory: 2036K [ 1.769250] random: fast init done [ 1.771199] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.771305] x86/mm: Checking user space page tables [ 1.783009] usb 1-1: New USB device found, idVendor=0ac8, idProduct=3420 [ 1.783014] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.783018] usb 1-1: Product: A4tech USB2.0 Camera [ 1.783022] usb 1-1: Manufacturer: Vimicro Corp. [ 1.784219] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.791380] random: systemd: uninitialized urandom read (16 bytes read) [ 1.791690] random: systemd: uninitialized urandom read (16 bytes read) [ 1.791703] random: systemd: uninitialized urandom read (16 bytes read) [ 1.793600] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.810209] systemd[1]: Detected architecture x86-64. [ 1.810215] systemd[1]: Running in initial RAM disk. [ 1.810234] systemd[1]: No hostname configured. [ 1.810243] systemd[1]: Set hostname to ... [ 1.810277] systemd[1]: Initializing machine ID from random generator. [ 1.860624] systemd[1]: [/run/systemd/generator/dev-disk-by\x2duuid-....device.d/timeout.conf:3] Unknown lvalue 'JobRunningTimeoutSec' in section 'Unit' [ 1.861652] systemd[1]: Listening on Journal Socket. [ 1.861750] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.861801] systemd[1]: Listening on udev Kernel Socket. [ 2.103323] RPC: Registered named UNIX socket transport module. [ 2.103327] RPC: Registered udp transport module. [ 2.103327] RPC: Registered tcp transport module. [ 2.103328] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.106752] usb 2-2: new full-speed USB device number 2 using uhci_hcd [ 2.183431] tsc: Refined TSC clocksource calibration: 2133.307 MHz [ 2.183439] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1ec0188ba59, max_idle_ns: 440795300846 ns [ 2.438844] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.438858] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.439364] r8169 0000:03:00.0 eth0: RTL8105e at 0x (ptrval), XX:XX:XX:XX:XX:XX, XID 00a00000 IRQ 24 [ 2.514789] usb 2-2: New USB device found, idVendor=03f0, idProduct=0317 [ 2.514797] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.514801] usb 2-2: Product: HP LaserJet 1200 [ 2.514806] usb 2-2: Manufacturer: HewLett Packard [ 2.514810] usb 2-2: SerialNumber: ... [ 2.552653] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 2.659130] checking generic (d8000000 300000) vs hw (d8000000 8000000) [ 2.659134] fb: switching to nouveaufb from VESA VGA [ 2.659178] Console: switching to colour dummy device 80x25 [ 2.659420] nouveau 0000:01:00.0: NVIDIA NV43 (043000a4) [ 2.692149] nouveau 0000:01:00.0: bios: version XXX.XXX.XXX.XXX.00 [ 2.693031] nouveau 0000:01:00.0: fb: 128 MiB GDDR3 [ 2.743033] [TTM] Zone kernel: Available graphics memory: 1536536 kiB [ 2.743035] [TTM] Initializing pool allocator [ 2.743042] [TTM] Initializing DMA pool allocator [ 2.743068] nouveau 0000:01:00.0: DRM: VRAM: 124 MiB [ 2.743070] nouveau 0000:01:00.0: DRM: GART: 512 MiB [ 2.743074] nouveau 0000:01:00.0: DRM: TMDS table version 1.1 [ 2.743076] nouveau 0000:01:00.0: DRM: DCB version 3.0 [ 2.743079] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028 [ 2.743082] nouveau 0000:01:00.0: DRM: DCB outp 01: 03000302 00000000 [ 2.743084] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028 [ 2.743086] nouveau 0000:01:00.0: DRM: DCB outp 03: 04011312 00000080 [ 2.743088] nouveau 0000:01:00.0: DRM: DCB outp 04: 020223f1 0004c083 [ 2.743090] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030 [ 2.743092] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130 [ 2.743094] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210 [ 2.743096] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211 [ 2.743098] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213 [ 2.745442] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.745444] [drm] Driver supports precise vblank timestamp query. [ 2.747111] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies [ 2.747124] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 4) [ 2.887019] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo (ptrval) [ 2.890439] fbcon: nouveaufb (fb0) is primary device [ 3.038149] nouveau 0000:01:00.0: DRM: 0xD4E4: Parsing digital output script table [ 3.088223] Console: switching to colour frame buffer device 160x64 [ 3.196845] clocksource: Switched to clocksource tsc [ 3.220862] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 3.240119] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 5.163282] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 5.749905] systemd-journald[166]: Received SIGTERM from PID 1 (systemd). [ 6.041872] systemd: 22 output lines suppressed due to ratelimiting [ 6.785457] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 7.251330] systemd-fstab-generator[555]: ... [ 12.083433] EXT4-fs (sda5): re-mounted. Opts: acl [ 15.608591] systemd-journald[558]: Received request to flush runtime journal from PID 1 [ 19.190380] parport_pc 00:03: reported by Plug and Play ACPI [ 19.190457] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 19.336675] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 19.336679] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 19.336681] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 19.336683] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 19.336685] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 19.336686] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 19.336689] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 19.336691] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 19.336693] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 19.345845] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.351972] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 19.352057] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 19.352132] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 19.352209] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 19.352285] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 20.077014] intel_rng: FWH not detected [ 20.207064] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247) [ 20.207074] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247) [ 20.207081] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 20.207119] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 20.267828] leds_ss4200: no LED devices found [ 20.449145] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 20.491281] usblp 2-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317 [ 20.491326] usbcore: registered new interface driver usblp [ 22.340179] media: Linux media interface: v0.10 [ 22.388256] Linux video capture interface: v2.00 [ 22.478309] coretemp coretemp.0: Using relative temperature scale! [ 22.479021] coretemp coretemp.0: Using relative temperature scale! [ 22.499528] intel_powerclamp: No package C-state available [ 22.500159] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input9 [ 22.517360] intel_powerclamp: No package C-state available [ 22.870045] ppdev: user-space parallel port driver [ 23.122627] iTCO_vendor_support: vendor-support=0 [ 23.125376] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 23.125436] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 23.125968] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.144735] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 26.508919] usbcore: registered new interface driver snd-usb-audio [ 26.509617] uvcvideo: Found UVC 1.00 device A4tech USB2.0 Camera (0ac8:3420) [ 26.512874] uvcvideo 1-1:1.0: Entity type for entity Processing 2 was not initialized! [ 26.512878] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized! [ 26.512880] uvcvideo 1-1:1.0: Entity type for entity Extension 4 was not initialized! [ 26.513097] input: A4tech USB2.0 Camera: A4tech US as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input10 [ 26.514199] usbcore: registered new interface driver uvcvideo [ 26.514200] USB Video Class driver (1.1.1) [ 33.296220] f71882fg: Found f71889fg chip at 0xa00, revision 21 [ 33.296394] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode [ 33.296417] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode [ 33.296438] f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode [ 33.296453] f71882fg f71882fg.2560: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 35.054810] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl [ 44.294579] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 46.428552] r8169 0000:03:00.0 enp3s0: link down [ 46.428558] r8169 0000:03:00.0 enp3s0: link down [ 46.428667] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 47.958679] r8169 0000:03:00.0 enp3s0: link up [ 47.958693] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 54.072565] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 54.447190] Netfilter messages via NETLINK v0.30. [ 54.504850] ctnetlink v0.93: registering with nfnetlink. [ 57.524704] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 58.601474] random: crng init done [ 58.601479] random: 7 urandom warning(s) missed due to ratelimiting [ 61.827570] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 65.601591] usblp0: removed [ 65.616011] usblp 2-2:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317 [ 107.453781] Bluetooth: Core ver 2.22 [ 107.453826] NET: Registered protocol family 31 [ 107.453827] Bluetooth: HCI device and connection manager initialized [ 107.453835] Bluetooth: HCI socket layer initialized [ 107.453838] Bluetooth: L2CAP socket layer initialized [ 107.453847] Bluetooth: SCO socket layer initialized [ 107.820046] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 107.820049] Bluetooth: BNEP filters: protocol multicast [ 107.820054] Bluetooth: BNEP socket layer initialized [ 207.319285] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 207.509297] usb 5-2: New USB device found, idVendor=0b05, idProduct=17cb [ 207.509301] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 207.509304] usb 5-2: Product: BCM20702A0 [ 207.509306] usb 5-2: Manufacturer: Broadcom Corp [ 207.509308] usb 5-2: SerialNumber: ... [ 207.663346] usbcore: registered new interface driver btusb [ 207.790313] Bluetooth: hci0: BCM: chip id 63 [ 207.792319] Bluetooth: hci0: BCM: features 0x07 [ 207.824312] Bluetooth: hci0: ... [ 207.826305] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 207.840903] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2 [ 207.840907] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found [ 208.189757] NET: Registered protocol family 38 [ 208.245116] Bluetooth: RFCOMM TTY layer initialized [ 208.245126] Bluetooth: RFCOMM socket layer initialized [ 208.245134] Bluetooth: RFCOMM ver 1.11 [ 528.149738] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input11 [ 706.884700] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input12 [ 741.663038] perf: interrupt took too long (2565 > 2500), lowering kernel.perf_event_max_sample_rate to 77700 [ 972.178932] perf: interrupt took too long (3215 > 3206), lowering kernel.perf_event_max_sample_rate to 62100 [ 1273.755905] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input13 [ 1407.577401] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 1411.281132] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 1414.436893] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1414.577887] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1416.297296] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1417.070178] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1417.857078] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1418.870240] perf: interrupt took too long (4020 > 4018), lowering kernel.perf_event_max_sample_rate to 49500 [ 1419.062505] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1556.035010] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 1556.801969] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 1557.826742] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 1557.919119] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 1560.510606] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1561.248864] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1561.837966] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1562.592964] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1563.421486] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1564.362989] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1565.111131] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1566.226989] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1567.069838] sdc: sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 sdc15 > [ 1872.400032] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input14 [ 2093.625130] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input15 [ 2255.494755] perf: interrupt took too long (5026 > 5025), lowering kernel.perf_event_max_sample_rate to 39600 [ 2791.473362] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input16 [ 3705.399650] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input17 [ 4359.686804] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input18 [ 4403.164811] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input19 [ 4517.538872] usb 5-2: USB disconnect, device number 2 [ 4528.984078] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 4529.011942] ISOFS: changing to secondary root [ 4700.216022] usb 5-2: new full-speed USB device number 3 using uhci_hcd [ 4700.410042] usb 5-2: New USB device found, idVendor=0b05, idProduct=17cb [ 4700.410047] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4700.410050] usb 5-2: Product: BCM20702A0 [ 4700.410052] usb 5-2: Manufacturer: Broadcom Corp [ 4700.410054] usb 5-2: SerialNumber: ... [ 4700.530049] Bluetooth: hci0: BCM: chip id 63 [ 4700.532031] Bluetooth: hci0: BCM: features 0x07 [ 4700.563058] Bluetooth: hci0: ... [ 4700.565066] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 4700.656271] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2 [ 4700.656278] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found [ 4926.510587] input: XX:XX:XX:XX:XX:XX as /devices/virtual/input/input20 [ 5968.928154] VFS: busy inodes on changed media or resized disk sr0 [ 6687.315289] sr 3:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6687.315294] sr 3:0:1:0: [sr0] tag#0 Sense Key : Not Ready [deferred] [ 6687.315298] sr 3:0:1:0: [sr0] tag#0 Add. Sense: Medium not present - tray closed [ 6687.315303] sr 3:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 1c 00 00 01 00 [ 6687.315306] print_req_error: I/O error, dev sr0, sector 112 [ 6687.346971] sr 3:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6687.346976] sr 3:0:1:0: [sr0] tag#0 Sense Key : Not Ready [deferred] [ 6687.346979] sr 3:0:1:0: [sr0] tag#0 Add. Sense: Medium not present - tray closed [ 6687.346984] sr 3:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 1c 00 00 01 00 [ 6687.346987] print_req_error: I/O error, dev sr0, sector 112 [ 6687.373619] sr 3:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6687.373624] sr 3:0:1:0: [sr0] tag#0 Sense Key : Not Ready [deferred] [ 6687.373628] sr 3:0:1:0: [sr0] tag#0 Add. Sense: Medium not present - tray closed [ 6687.373632] sr 3:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 1c 00 00 01 00 [ 6687.373635] print_req_error: I/O error, dev sr0, sector 112 [ 6687.403890] sr 3:0:1:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 6687.403895] sr 3:0:1:0: [sr0] tag#0 Sense Key : Not Ready [deferred] [ 6687.403899] sr 3:0:1:0: [sr0] tag#0 Add. Sense: Medium not present - tray closed [ 6687.403903] sr 3:0:1:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 1c 00 00 01 00 [ 6687.403905] print_req_error: I/O error, dev sr0, sector 112 [ 6702.105818] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 6704.746131] r8169 0000:03:00.0: invalid large VPD tag 7f at offset 0