[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x706f8018-0x70708057] usable ==> usable [ 0.000000] e820: update [mem 0x706f8018-0x70708057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000706f8017] usable [ 0.000000] reserve setup_data: [mem 0x00000000706f8018-0x0000000070708057] usable [ 0.000000] reserve setup_data: [mem 0x0000000070708058-0x000000007157dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000007157e000-0x000000007157efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000007157f000-0x000000007157ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000071580000-0x00000000731e7fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000731e8000-0x0000000073ae7fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000073ae8000-0x0000000089cfdfff] usable [ 0.000000] reserve setup_data: [mem 0x0000000089cfe000-0x000000008a88dfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000008a88e000-0x000000008af7dfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000008af7e000-0x000000008affdfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000008affe000-0x000000008affefff] usable [ 0.000000] reserve setup_data: [mem 0x000000008afff000-0x000000008fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026effffff] usable [ 0.000000] efi: EFI v2.50 by INSYDE Corp. [ 0.000000] efi: ACPI 2.0=0x8affd014 SMBIOS=0x8a099000 SMBIOS 3.0=0x8a097000 ESRT=0x8a0950d8 MEMATTR=0x7a677018 TPMEventLog=0x70709018 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Acer Aspire A517-51/Dragonite_KL, BIOS V1.22 10/09/2018 [ 0.000000] tsc: Detected 1800.000 MHz processor [ 0.001534] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001535] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001540] last_pfn = 0x26f000 max_arch_pfn = 0x400000000 [ 0.001550] MTRR default type: write-back [ 0.001550] MTRR fixed ranges enabled: [ 0.001551] 00000-9FFFF write-back [ 0.001552] A0000-BFFFF uncachable [ 0.001552] C0000-FFFFF write-protect [ 0.001553] MTRR variable ranges enabled: [ 0.001554] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.001555] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.001555] 2 base 0090000000 mask 7FF0000000 uncachable [ 0.001556] 3 base 008C000000 mask 7FFC000000 uncachable [ 0.001556] 4 base 008B800000 mask 7FFF800000 uncachable [ 0.001556] 5 disabled [ 0.001557] 6 disabled [ 0.001557] 7 disabled [ 0.001557] 8 disabled [ 0.001558] 9 disabled [ 0.001959] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002129] last_pfn = 0x8afff max_arch_pfn = 0x400000000 [ 0.013104] esrt: Reserving ESRT space from 0x000000008a0950d8 to 0x000000008a095110. [ 0.013110] check: Scanning 1 areas for low memory corruption [ 0.013113] Using GB pages for direct mapping [ 0.013115] BRK [0x1f3801000, 0x1f3801fff] PGTABLE [ 0.013116] BRK [0x1f3802000, 0x1f3802fff] PGTABLE [ 0.013117] BRK [0x1f3803000, 0x1f3803fff] PGTABLE [ 0.013159] BRK [0x1f3804000, 0x1f3804fff] PGTABLE [ 0.013161] BRK [0x1f3805000, 0x1f3805fff] PGTABLE [ 0.013324] BRK [0x1f3806000, 0x1f3806fff] PGTABLE [ 0.013361] BRK [0x1f3807000, 0x1f3807fff] PGTABLE [ 0.013458] BRK [0x1f3808000, 0x1f3808fff] PGTABLE [ 0.013495] BRK [0x1f3809000, 0x1f3809fff] PGTABLE [ 0.013528] BRK [0x1f380a000, 0x1f380afff] PGTABLE [ 0.013581] BRK [0x1f380b000, 0x1f380bfff] PGTABLE [ 0.013652] BRK [0x1f380c000, 0x1f380cfff] PGTABLE [ 0.013735] RAMDISK: [mem 0x3d5fa000-0x3fffafff] [ 0.013741] ACPI: Early table checksum verification disabled [ 0.013743] ACPI: RSDP 0x000000008AFFD014 000024 (v02 ACRSYS) [ 0.013745] ACPI: XSDT 0x000000008AFBD188 00011C (v01 ACRSYS ACRPRDCT 00000000 01000013) [ 0.013749] ACPI: FACP 0x000000008AFE8000 00010C (v05 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.013753] ACPI: DSDT 0x000000008AFC2000 0215A4 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.013755] ACPI: FACS 0x000000008AF59000 000040 [ 0.013756] ACPI: UEFI 0x000000008AFFB000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.013758] ACPI: SSDT 0x000000008AFF3000 0004C3 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.013760] ACPI: TPM2 0x000000008AFF1000 000034 (v03 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.013762] ACPI: ASF! 0x000000008AFEC000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013763] ACPI: BOOT 0x000000008AFEA000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013765] ACPI: HPET 0x000000008AFE7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013767] ACPI: MCFG 0x000000008AFE5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013769] ACPI: SSDT 0x000000008AFC0000 000F6B (v02 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.013771] ACPI: WSMT 0x000000008AFBE000 000028 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.013772] ACPI: SSDT 0x000000008AFBB000 000346 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.013774] ACPI: SSDT 0x000000008AFB6000 00051E (v02 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.013776] ACPI: DBG2 0x000000008AFB4000 000054 (v00 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.013778] ACPI: DMAR 0x000000008AFE4000 0000F0 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013779] ACPI: SSDT 0x000000008AFF5000 0058C1 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.013781] ACPI: SSDT 0x000000008AFED000 00312B (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.013783] ACPI: DBGP 0x000000008AFE9000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013785] ACPI: SSDT 0x000000008AFC1000 000517 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.013787] ACPI: SSDT 0x000000008AFBC000 00029F (v02 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.013789] ACPI: DBGP 0x000000008AFB5000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.013790] ACPI: SSDT 0x000000008AFB0000 0017AE (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.013792] ACPI: FPDT 0x000000008AFAE000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.013794] ACPI: SSDT 0x000000008AFF2000 000046 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 0.013796] ACPI: APIC 0x000000008AFE6000 00012C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013798] ACPI: SSDT 0x000000008AFB7000 003002 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.013799] ACPI: NHLT 0x000000008AFAF000 00002D (v00 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.013801] ACPI: ASPT 0x000000008AFEB000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013803] ACPI: SSDT 0x000000008AFB2000 0012E6 (v02 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 0.013805] ACPI: LPIT 0x000000008AFBF000 000094 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.013806] ACPI: UEFI 0x000000008AFFC000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013808] ACPI: BGRT 0x000000008AFAD000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.013814] ACPI: Local APIC address 0xfee00000 [ 0.013960] No NUMA configuration found [ 0.013961] Faking a node at [mem 0x0000000000000000-0x000000026effffff] [ 0.013968] NODE_DATA(0) allocated [mem 0x26efd5000-0x26effffff] [ 0.014139] Zone ranges: [ 0.014140] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.014141] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.014141] Normal [mem 0x0000000100000000-0x000000026effffff] [ 0.014142] Device empty [ 0.014142] Movable zone start for each node [ 0.014145] Early memory node ranges [ 0.014145] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.014146] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.014146] node 0: [mem 0x0000000000100000-0x000000007157dfff] [ 0.014147] node 0: [mem 0x0000000071580000-0x00000000731e7fff] [ 0.014147] node 0: [mem 0x0000000073ae8000-0x0000000089cfdfff] [ 0.014148] node 0: [mem 0x000000008affe000-0x000000008affefff] [ 0.014148] node 0: [mem 0x0000000100000000-0x000000026effffff] [ 0.014286] Zeroed struct page in unavailable ranges: 27751 pages [ 0.014287] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff] [ 0.014288] On node 0 totalpages: 2065305 [ 0.014289] DMA zone: 64 pages used for memmap [ 0.014289] DMA zone: 21 pages reserved [ 0.014290] DMA zone: 3996 pages, LIFO batch:0 [ 0.014328] DMA32 zone: 8720 pages used for memmap [ 0.014328] DMA32 zone: 558077 pages, LIFO batch:63 [ 0.019888] Normal zone: 23488 pages used for memmap [ 0.019889] Normal zone: 1503232 pages, LIFO batch:63 [ 0.030987] tboot: non-0 tboot_addr but it is not of type E820_TYPE_RESERVED [ 0.030995] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff] [ 0.031147] ACPI: PM-Timer IO Port: 0x1808 [ 0.031148] ACPI: Local APIC address 0xfee00000 [ 0.031153] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.031154] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.031154] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.031155] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.031155] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.031155] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.031156] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.031156] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.031157] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.031157] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.031157] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.031158] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.031158] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.031158] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.031159] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.031159] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.031185] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.031187] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.031188] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.031189] ACPI: IRQ0 used by override. [ 0.031189] ACPI: IRQ9 used by override. [ 0.031191] Using ACPI (MADT) for SMP configuration information [ 0.031192] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.031195] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.031212] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.031213] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.031214] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.031215] PM: Registered nosave memory: [mem 0x706f8000-0x706f8fff] [ 0.031216] PM: Registered nosave memory: [mem 0x70708000-0x70708fff] [ 0.031217] PM: Registered nosave memory: [mem 0x7157e000-0x7157efff] [ 0.031218] PM: Registered nosave memory: [mem 0x7157f000-0x7157ffff] [ 0.031219] PM: Registered nosave memory: [mem 0x731e8000-0x73ae7fff] [ 0.031220] PM: Registered nosave memory: [mem 0x89cfe000-0x8a88dfff] [ 0.031220] PM: Registered nosave memory: [mem 0x8a88e000-0x8af7dfff] [ 0.031221] PM: Registered nosave memory: [mem 0x8af7e000-0x8affdfff] [ 0.031222] PM: Registered nosave memory: [mem 0x8afff000-0x8fffffff] [ 0.031222] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff] [ 0.031223] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.031223] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff] [ 0.031223] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] [ 0.031224] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff] [ 0.031224] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.031225] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.031225] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.031225] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] [ 0.031226] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.031226] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] [ 0.031226] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff] [ 0.031227] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff] [ 0.031227] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.031227] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff] [ 0.031228] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff] [ 0.031229] [mem 0x90000000-0xdfffffff] available for PCI devices [ 0.031229] Booting paravirtualized kernel on bare hardware [ 0.031232] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.031236] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.031363] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.031368] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.031369] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.031390] Built 1 zonelists, mobility grouping on. Total pages: 2033012 [ 0.031390] Policy zone: Normal [ 0.031391] Kernel command line: BOOT_IMAGE=(hd1,gpt3)/boot/ostree/eos-HASH_63C-3E7C-2A61-26D9-B63A797AA9C0/vmlinuz-5.3.0-28-generic root=UUID=HASH_F5E-FEAE-A019-5627-52701104269C rw splash plymouth.ignore-serial-consoles quiet loglevel=2 ostree=/ostree/boot.0/eos/HASH_63C-3E7C-2A61-26D9-B63A797AA9C0/0 [ 0.031784] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.031944] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.032002] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.034396] Calgary: detecting Calgary via BIOS EBDA area [ 0.034398] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.047888] Memory: 7935300K/8261220K available (14339K kernel code, 2359K rwdata, 4776K rodata, 2652K init, 5100K bss, 325920K reserved, 0K cma-reserved) [ 0.047989] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.047997] Kernel/User page tables isolation: enabled [ 0.048008] ftrace: allocating 42900 entries in 168 pages [ 0.060163] rcu: Hierarchical RCU implementation. [ 0.060164] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.060164] Tasks RCU enabled. [ 0.060165] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.060165] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.062541] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.062798] random: crng done (trusting CPU's manufacturer) [ 0.062822] Console: colour dummy device 80x25 [ 0.062825] printk: console [tty0] enabled [ 0.062836] ACPI: Core revision 20190703 [ 0.063132] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.063197] APIC: Switch to symmetric I/O mode setup [ 0.063198] DMAR: Host address width 39 [ 0.063199] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.063203] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.063204] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.063206] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.063207] DMAR: RMRR base: 0x0000008a76a000 end: 0x0000008a789fff [ 0.063208] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff [ 0.063209] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.063209] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.063210] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.063210] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.063211] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.064661] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.064662] x2apic enabled [ 0.064674] Switched APIC routing to cluster x2apic. [ 0.068666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.087171] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 0.087174] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000) [ 0.087176] pid_max: default: 32768 minimum: 301 [ 0.089263] LSM: Security Framework initializing [ 0.089271] Yama: becoming mindful. [ 0.089300] AppArmor: AppArmor initialized [ 0.089333] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.089341] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.089458] *** VALIDATE proc *** [ 0.089497] *** VALIDATE cgroup1 *** [ 0.089498] *** VALIDATE cgroup2 *** [ 0.089539] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.089555] process: using mwait in idle threads [ 0.089556] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.089557] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.089559] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.089561] Spectre V2 : Mitigation: Full generic retpoline [ 0.089561] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.089561] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.089562] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.089563] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.089564] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.089566] MDS: Mitigation: Clear CPU buffers [ 0.089748] Freeing SMP alternatives memory: 36K [ 0.091225] TSC deadline timer enabled [ 0.091229] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.091301] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.091305] ... version: 4 [ 0.091306] ... bit width: 48 [ 0.091306] ... generic registers: 4 [ 0.091307] ... value mask: 0000ffffffffffff [ 0.091307] ... max period: 00007fffffffffff [ 0.091307] ... fixed-purpose events: 3 [ 0.091308] ... event mask: 000000070000000f [ 0.091335] rcu: Hierarchical SRCU implementation. [ 0.092118] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.092170] smp: Bringing up secondary CPUs ... [ 0.092225] x86: Booting SMP configuration: [ 0.092226] .... node #0, CPUs: #1 #2 #3 #4 [ 0.096738] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.096738] #5 #6 #7 [ 0.096738] smp: Brought up 1 node, 8 CPUs [ 0.096738] smpboot: Max logical packages: 1 [ 0.096738] smpboot: Total of 8 processors activated (28800.00 BogoMIPS) [ 0.099359] devtmpfs: initialized [ 0.099359] x86/mm: Memory block size: 128MB [ 0.099734] PM: Registering ACPI NVS region [mem 0x7157e000-0x7157efff] (4096 bytes) [ 0.099734] PM: Registering ACPI NVS region [mem 0x8a88e000-0x8af7dfff] (7274496 bytes) [ 0.099734] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.099734] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.099734] pinctrl core: initialized pinctrl subsystem [ 0.099734] PM: RTC time: 12:29:12, date: 2020-02-16 [ 0.099734] NET: Registered protocol family 16 [ 0.099734] EISA bus registered [ 0.099734] cpuidle: using governor ladder [ 0.099734] cpuidle: using governor menu [ 0.099734] Simple Boot Flag at 0x44 set to 0x1 [ 0.099734] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.099734] ACPI: bus type PCI registered [ 0.099734] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.099734] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.099734] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.099734] PCI: Using configuration type 1 for base access [ 0.099734] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.099873] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.099873] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.103234] ACPI: Added _OSI(Module Device) [ 0.103235] ACPI: Added _OSI(Processor Device) [ 0.103235] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.103236] ACPI: Added _OSI(Processor Aggregator Device) [ 0.103237] ACPI: Added _OSI(Linux-Dell-Video) [ 0.103237] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.103238] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.134621] ACPI: 13 ACPI AML tables successfully acquired and loaded [ 0.136815] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.139860] ACPI: Dynamic OEM Table Load: [ 0.139872] ACPI: SSDT 0xFFFF958FE5817000 00058B (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.140404] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.144635] ACPI: Dynamic OEM Table Load: [ 0.144642] ACPI: SSDT 0xFFFF958FE4F51000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.145808] ACPI: Dynamic OEM Table Load: [ 0.145814] ACPI: SSDT 0xFFFF958FE4FA50C0 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.146908] ACPI: Dynamic OEM Table Load: [ 0.146913] ACPI: SSDT 0xFFFF958FE48BB000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.148359] ACPI: Dynamic OEM Table Load: [ 0.148367] ACPI: SSDT 0xFFFF958FE4CAE000 000D14 (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.150161] ACPI: Dynamic OEM Table Load: [ 0.150166] ACPI: SSDT 0xFFFF958FE4F51C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.151378] ACPI: Dynamic OEM Table Load: [ 0.151383] ACPI: SSDT 0xFFFF958FE4F57C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.157439] ACPI: EC: EC started [ 0.157439] ACPI: EC: interrupt blocked [ 0.157773] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.157774] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.157775] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.157775] ACPI: Interpreter enabled [ 0.157812] ACPI: (supports S0 S3 S4 S5) [ 0.157813] ACPI: Using IOAPIC for interrupt routing [ 0.157845] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.161021] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.180640] ACPI: Power Resource [FN00] (off) [ 0.180726] ACPI: Power Resource [FN01] (off) [ 0.180807] ACPI: Power Resource [FN02] (off) [ 0.180888] ACPI: Power Resource [FN03] (off) [ 0.180970] ACPI: Power Resource [FN04] (off) [ 0.182054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.182058] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.182212] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.182356] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.182357] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.184106] PCI host bridge to bus 0000:00 [ 0.184108] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.184109] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.184109] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.184110] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.184111] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.184111] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.184112] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.184113] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.184113] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.184114] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.184115] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.184115] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.184116] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.184117] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.184117] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.184118] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.184119] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] [ 0.184119] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.184120] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.184127] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 [ 0.184998] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 [ 0.185006] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit] [ 0.185010] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.185013] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.185025] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.185771] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.185793] pci 0000:00:14.0: reg 0x10: [mem 0xb1310000-0xb131ffff 64bit] [ 0.185858] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.186634] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.186662] pci 0000:00:15.0: reg 0x10: [mem 0xb132a000-0xb132afff 64bit] [ 0.187442] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.187470] pci 0000:00:15.1: reg 0x10: [mem 0xb132b000-0xb132bfff 64bit] [ 0.188265] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.188290] pci 0000:00:16.0: reg 0x10: [mem 0xb132c000-0xb132cfff 64bit] [ 0.188361] pci 0000:00:16.0: PME# supported from D3hot [ 0.189120] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.189137] pci 0000:00:17.0: reg 0x10: [mem 0xb1328000-0xb1329fff] [ 0.189144] pci 0000:00:17.0: reg 0x14: [mem 0xb132f000-0xb132f0ff] [ 0.189151] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] [ 0.189158] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] [ 0.189165] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] [ 0.189172] pci 0000:00:17.0: reg 0x24: [mem 0xb132d000-0xb132d7ff] [ 0.189212] pci 0000:00:17.0: PME# supported from D3hot [ 0.189923] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.189996] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.190751] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.190824] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.191576] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.192374] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.192390] pci 0000:00:1f.2: reg 0x10: [mem 0xb1324000-0xb1327fff] [ 0.193136] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380 [ 0.193164] pci 0000:00:1f.3: reg 0x10: [mem 0xb1320000-0xb1323fff 64bit] [ 0.193196] pci 0000:00:1f.3: reg 0x20: [mem 0xb1300000-0xb130ffff 64bit] [ 0.193244] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.194029] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.194089] pci 0000:00:1f.4: reg 0x10: [mem 0xb132e000-0xb132e0ff 64bit] [ 0.194158] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f] [ 0.194968] pci 0000:01:00.0: [10ec:5287] type 00 class 0xff0000 [ 0.194998] pci 0000:01:00.0: reg 0x10: [mem 0xb1205000-0xb1205fff] [ 0.195057] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.195150] pci 0000:01:00.0: supports D1 D2 [ 0.195151] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.195252] pci 0000:01:00.1: [10ec:8168] type 00 class 0x020000 [ 0.195280] pci 0000:01:00.1: reg 0x10: [io 0x3000-0x30ff] [ 0.195306] pci 0000:01:00.1: reg 0x18: [mem 0xb1204000-0xb1204fff 64bit] [ 0.195322] pci 0000:01:00.1: reg 0x20: [mem 0xb1200000-0xb1203fff 64bit] [ 0.195421] pci 0000:01:00.1: supports D1 D2 [ 0.195422] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195541] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.195544] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.195546] pci 0000:00:1c.0: bridge window [mem 0xb1200000-0xb12fffff] [ 0.195700] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000 [ 0.195897] pci 0000:02:00.0: reg 0x10: [mem 0xb1000000-0xb11fffff 64bit] [ 0.196675] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.197332] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.197335] pci 0000:00:1c.5: bridge window [mem 0xb1000000-0xb11fffff] [ 0.199707] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.199759] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.199810] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.199861] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.199913] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.199963] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.200013] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.200062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.203175] ACPI: EC: interrupt unblocked [ 0.203175] ACPI: EC: event unblocked [ 0.203175] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.203175] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events [ 0.203291] SCSI subsystem initialized [ 0.203300] libata version 3.00 loaded. [ 0.203300] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.203300] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.203300] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.203300] vgaarb: loaded [ 0.203300] ACPI: bus type USB registered [ 0.203300] usbcore: registered new interface driver usbfs [ 0.203300] usbcore: registered new interface driver hub [ 0.203300] usbcore: registered new device driver usb [ 0.203300] pps_core: LinuxPPS API ver. 1 registered [ 0.203300] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.203300] PTP clock support registered [ 0.203300] EDAC MC: Ver: 3.0.0 [ 0.203302] Registered efivars operations [ 0.203302] PCI: Using ACPI for IRQ routing [ 0.233222] PCI: pci_cache_line_size set to 64 bytes [ 0.233389] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.233390] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.233391] e820: reserve RAM buffer [mem 0x706f8018-0x73ffffff] [ 0.233393] e820: reserve RAM buffer [mem 0x7157e000-0x73ffffff] [ 0.233394] e820: reserve RAM buffer [mem 0x731e8000-0x73ffffff] [ 0.233395] e820: reserve RAM buffer [mem 0x89cfe000-0x8bffffff] [ 0.233396] e820: reserve RAM buffer [mem 0x8afff000-0x8bffffff] [ 0.233397] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff] [ 0.233547] NetLabel: Initializing [ 0.233548] NetLabel: domain hash size = 128 [ 0.233548] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.233568] NetLabel: unlabeled traffic allowed by default [ 0.233588] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.233588] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.236211] clocksource: Switched to clocksource tsc-early [ 0.251487] VFS: Disk quotas dquot_6.6.0 [ 0.251508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.251546] *** VALIDATE hugetlbfs *** [ 0.251650] AppArmor: AppArmor Filesystem Enabled [ 0.251686] pnp: PnP ACPI init [ 0.251972] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.251975] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.251977] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.251978] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.251980] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.251982] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.251984] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.251990] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252531] system 00:01: [io 0x2000-0x20fe] has been reserved [ 0.252536] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252784] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.252786] system 00:02: [io 0xfd60-0xfd63] has been reserved [ 0.252788] system 00:02: [io 0xffff] has been reserved [ 0.252790] system 00:02: [io 0xffff] has been reserved [ 0.252791] system 00:02: [io 0xffff] has been reserved [ 0.252793] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.252795] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.252799] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252970] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.253032] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.253036] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.253092] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.253259] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 (active) [ 0.255378] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.256643] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.256645] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.256647] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.256649] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.256651] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.256653] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.256655] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.256657] system 00:08: [mem 0xff000000-0xff000fff] has been reserved [ 0.256658] system 00:08: [mem 0xff010000-0xffffffff] could not be reserved [ 0.256660] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.256662] system 00:08: [mem 0x90000000-0x9001ffff] has been reserved [ 0.256667] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.257605] pnp: PnP ACPI: found 9 devices [ 0.259435] thermal_sys: Registered thermal governor 'fair_share' [ 0.259436] thermal_sys: Registered thermal governor 'bang_bang' [ 0.259437] thermal_sys: Registered thermal governor 'step_wise' [ 0.259438] thermal_sys: Registered thermal governor 'user_space' [ 0.259439] thermal_sys: Registered thermal governor 'power_allocator' [ 0.263954] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.263997] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.264009] pci 0000:01:00.0: BAR 6: assigned [mem 0xb1210000-0xb121ffff pref] [ 0.264011] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.264017] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.264022] pci 0000:00:1c.0: bridge window [mem 0xb1200000-0xb12fffff] [ 0.264030] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.264034] pci 0000:00:1c.5: bridge window [mem 0xb1000000-0xb11fffff] [ 0.264042] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.264044] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.264046] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.264048] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.264049] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.264050] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.264052] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.264053] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.264055] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.264056] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.264058] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.264059] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.264060] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.264062] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.264063] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.264065] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.264066] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window] [ 0.264068] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window] [ 0.264069] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.264071] pci_bus 0000:01: resource 1 [mem 0xb1200000-0xb12fffff] [ 0.264072] pci_bus 0000:02: resource 1 [mem 0xb1000000-0xb11fffff] [ 0.264342] NET: Registered protocol family 2 [ 0.264529] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.264589] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.264768] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.264878] TCP: Hash tables configured (established 65536 bind 65536) [ 0.264931] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.264964] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.265074] NET: Registered protocol family 1 [ 0.265080] NET: Registered protocol family 44 [ 0.265092] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.266806] PCI: CLS 64 bytes, default 64 [ 0.266849] Trying to unpack rootfs image as initramfs... [ 1.317835] Freeing initrd memory: 43012K [ 1.317880] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.0 [ 1.317884] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.1 [ 1.335248] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.335251] software IO TLB: mapped [mem 0x8574c000-0x8974c000] (64MB) [ 1.335651] check: Scanning for low memory corruption every 60 seconds [ 1.338630] Initialise system trusted keyrings [ 1.338643] Key type blacklist registered [ 1.338692] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.340587] zbud: loaded [ 1.341103] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.341341] fuse: init (API version 7.31) [ 1.341488] Platform Keyring initialized [ 1.348741] Key type asymmetric registered [ 1.348742] Asymmetric key parser 'x509' registered [ 1.348752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.348803] io scheduler mq-deadline registered [ 1.349350] pcieport 0000:00:1c.0: AER: enabled with IRQ 122 [ 1.349690] pcieport 0000:00:1c.5: AER: enabled with IRQ 123 [ 1.349774] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.349865] efifb: probing for efifb [ 1.349883] efifb: showing boot graphics [ 1.351679] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k [ 1.351680] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.351681] efifb: scrolling: redraw [ 1.351683] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.351735] fbcon: Deferring console take-over [ 1.351736] fb0: EFI VGA frame buffer device [ 1.351748] intel_idle: MWAIT substates: 0x11142120 [ 1.351749] intel_idle: v0.4.1 model 0x8E [ 1.352352] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.352570] ACPI: AC Adapter [ACAD] (off-line) [ 1.352672] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C0D:00/input/input0 [ 1.352680] ACPI: Lid Switch [LID0] [ 1.352743] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.352753] ACPI: Sleep Button [SLPB] [ 1.352789] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.352805] ACPI: Power Button [PWRB] [ 1.352846] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.352855] ACPI: Power Button [PWRF] [ 1.476059] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.476061] ACPI: Thermal Zone [TZ00] (28 C) [ 1.476374] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.476376] ACPI: Thermal Zone [TZ01] (30 C) [ 1.476725] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.477991] battery: ACPI: Battery Slot [BAT1] (battery present) [ 1.479559] Linux agpgart interface v0.103 [ 1.490533] loop: module loaded [ 1.490833] libphy: Fixed MDIO Bus: probed [ 1.490834] tun: Universal TUN/TAP device driver, 1.6 [ 1.490895] PPP generic driver version 2.4.2 [ 1.490963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.490966] ehci-pci: EHCI PCI platform driver [ 1.490981] ehci-platform: EHCI generic platform driver [ 1.490994] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.490996] ohci-pci: OHCI PCI platform driver [ 1.491006] ohci-platform: OHCI generic platform driver [ 1.491015] uhci_hcd: USB Universal Host Controller Interface driver [ 1.491278] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.491285] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.492373] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.492379] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.492598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 1.492600] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.492602] usb usb1: Product: xHCI Host Controller [ 1.492603] usb usb1: Manufacturer: Linux 5.3.0-28-generic xhci-hcd [ 1.492604] usb usb1: SerialNumber: ... [ 1.492772] hub 1-0:1.0: USB hub found [ 1.492790] hub 1-0:1.0: 12 ports detected [ 1.493716] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.493720] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.493723] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.493767] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 1.493768] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.493770] usb usb2: Product: xHCI Host Controller [ 1.493771] usb usb2: Manufacturer: Linux 5.3.0-28-generic xhci-hcd [ 1.493773] usb usb2: SerialNumber: ... [ 1.493928] hub 2-0:1.0: USB hub found [ 1.493944] hub 2-0:1.0: 6 ports detected [ 1.494247] usb: port power management may be unreliable [ 1.494760] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.522804] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.522809] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.523007] mousedev: PS/2 mouse device common for all mice [ 1.523199] rtc_cmos 00:03: RTC can wake from S4 [ 1.523656] rtc_cmos 00:03: registered as rtc0 [ 1.523676] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.523684] i2c /dev entries driver [ 1.523743] device-mapper: uevent: version 1.0.3 [ 1.523811] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: XXX@XXX [ 1.523835] platform eisa.0: Probing EISA bus 0 [ 1.523837] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.523839] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.523840] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.523842] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.523843] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.523844] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.523845] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.523846] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.523848] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.523849] platform eisa.0: EISA: Detected 0 cards [ 1.523853] intel_pstate: Intel P-state driver initializing [ 1.525186] intel_pstate: HWP enabled [ 1.525324] ledtrig-cpu: registered to indicate activity on CPUs [ 1.525334] EFI Variables Facility v0.08 2004-May-17 [ 1.539359] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.604395] intel_pmc_core INT33A1:00: initialized [ 1.604753] NET: Registered protocol family 10 [ 1.619705] Segment Routing with IPv6 [ 1.619735] NET: Registered protocol family 17 [ 1.619913] Key type dns_resolver registered [ 1.620965] RAS: Correctable Errors collector initialized. [ 1.621006] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [ 1.621387] microcode: Microcode Update Driver: v2.2. [ 1.621401] sched_clock: Marking stable (1620970739, 411359)->(1628310269, -6928171) [ 1.621788] registered taskstats version 1 [ 1.621798] Loading compiled-in X.509 certificates [ 1.625255] Loaded X.509 cert 'Build time autogenerated kernel key: 0a77735f9e285a570b5bb9008b697e679763fab1' [ 1.625276] Loaded X.509 cert 'Endless Secure Boot Signer: 00abe94c46' [ 1.625325] zswap: loaded using pool lzo/zbud [ 1.639716] Key type big_key registered [ 1.639723] Key type trusted registered [ 1.646828] Key type encrypted registered [ 1.646833] AppArmor: AppArmor sha1 policy hashing enabled [ 1.649827] integrity: Loading X.509 certificate: UEFI:db [ 1.649883] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.649884] integrity: Loading X.509 certificate: UEFI:db [ 1.649915] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.649916] integrity: Loading X.509 certificate: UEFI:db [ 1.649936] integrity: Loaded X.509 cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' [ 1.649937] integrity: Loading X.509 certificate: UEFI:db [ 1.653156] integrity: Loaded X.509 cert 'Linpus: linpus.com: 2e092cab5e97a89f94a6e272ec7267c267cf4483' [ 1.653157] integrity: Loading X.509 certificate: UEFI:db [ 1.653162] integrity: Problem loading X.509 certificate -65 [ 1.653163] Error adding keys to platform keyring UEFI:db [ 1.653164] integrity: Loading X.509 certificate: UEFI:db [ 1.653167] integrity: Problem loading X.509 certificate -65 [ 1.653167] Error adding keys to platform keyring UEFI:db [ 1.654335] integrity: Loading X.509 certificate: UEFI:MokListRT [ 1.654673] integrity: Loaded X.509 cert 'Endless Secure Boot CA: 34ed74bcc9d5eea297f54bdcd6e6cd0fbae5eeb9' [ 1.657019] ima: Allocated hash algorithm: sha1 [ 1.670371] No architecture policies found [ 1.670386] evm: Initialising EVM extended attributes: [ 1.670387] evm: security.selinux [ 1.670387] evm: security.SMACK64 [ 1.670388] evm: security.SMACK64EXEC [ 1.670389] evm: security.SMACK64TRANSMUTE [ 1.670389] evm: security.SMACK64MMAP [ 1.670390] evm: security.apparmor [ 1.670391] evm: security.ima [ 1.670391] evm: security.capability [ 1.670392] evm: HMAC attrs: 0x1 [ 1.672116] PM: Magic number: 8:375:481 [ 1.672374] rtc_cmos 00:03: setting system clock to 2020-02-16T12:29:13 UTC (1581856153) [ 1.672609] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 1.674186] Freeing unused decrypted memory: 2040K [ 1.674802] Freeing unused kernel image memory: 2652K [ 1.711684] Write protecting the kernel read-only data: 22528k [ 1.712485] Freeing unused kernel image memory: 2008K [ 1.712901] Freeing unused kernel image memory: 1368K [ 1.727509] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.727511] x86/mm: Checking user space page tables [ 1.741831] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.741833] Run /init as init process [ 1.831244] usb 1-5: new full-speed USB device number 2 using xhci_hcd [ 1.887796] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.907823] systemd[1]: Detected architecture x86-64. [ 1.907828] systemd[1]: Running in initial RAM disk. [ 1.911102] systemd[1]: No hostname configured. [ 1.911110] systemd[1]: Set hostname to ... [ 1.911144] systemd[1]: Initializing machine ID from random generator. [ 1.911498] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 1.911590] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 1.913959] Lockdown: systemd: BPF is restricted; see man kernel_lockdown.7 [ 1.932894] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.932898] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 1.946203] systemd[1]: Listening on udev Kernel Socket. [ 1.980225] usb 1-5: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping [ 1.980228] usb 1-5: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping [ 1.980236] usb 1-5: New USB device found, idVendor=04ca, idProduct=3015, bcdDevice= 0.01 [ 1.980238] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.107199] usb 1-7: new high-speed USB device number 3 using xhci_hcd [ 2.121408] ahci 0000:00:17.0: version 3.0 [ 2.121809] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode [ 2.121814] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 2.122769] scsi host0: ahci [ 2.125557] scsi host1: ahci [ 2.131450] scsi host2: ahci [ 2.131561] ata1: SATA max UDMA/133 abar m2048@0xb132d000 port 0xb132d100 irq 126 [ 2.131565] ata2: SATA max UDMA/133 abar m2048@0xb132d000 port 0xb132d180 irq 126 [ 2.131568] ata3: SATA max UDMA/133 abar m2048@0xb132d000 port 0xb132d200 irq 126 [ 2.185509] checking generic (a0000000 7e9000) vs hw (a0000000 10000000) [ 2.185510] fb0: switching to inteldrmfb from EFI VGA [ 2.185593] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.187353] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.187354] [drm] Driver supports precise vblank timestamp query. [ 2.188129] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.188628] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 2.213017] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 2.216535] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.217186] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.222014] fbcon: i915drmfb (fb0) is primary device [ 2.222015] fbcon: Deferring console take-over [ 2.222018] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 2.269341] usb 1-7: New USB device found, idVendor=0408, idProduct=a060, bcdDevice= 0.01 [ 2.269344] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.269346] usb 1-7: Product: HD WebCam [ 2.269347] usb 1-7: Manufacturer: Generic [ 2.269349] usb 1-7: SerialNumber: ... [ 2.367302] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 2.367312] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 2.367369] clocksource: Switched to clocksource tsc [ 2.443682] ata1: SATA link down (SStatus 4 SControl 300) [ 2.443708] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.449061] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.450638] ata3.00: ATA-10: Micron_1100_MTFDDAV256TBN, M0MA020, max UDMA/133 [ 2.450641] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.453512] ata3.00: configured for UDMA/133 [ 2.463666] ahci 0000:00:17.0: port does not support device sleep [ 2.569525] ata2.00: ATA-10: ST1000LM035-1RK172, SDM3, max UDMA/133 [ 2.569528] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.620651] ata2.00: configured for UDMA/133 [ 2.630528] scsi 1:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SDM3 PQ: 0 ANSI: 5 [ 2.630998] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.631155] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.631157] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 2.631213] sd 1:0:0:0: [sda] Write Protect is off [ 2.631216] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.631267] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.631316] scsi 2:0:0:0: Direct-Access ATA Micron_1100_MTFD A020 PQ: 0 ANSI: 5 [ 2.631538] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.631593] ata3.00: Enabling discard_zeroes_data [ 2.631722] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.631748] sd 2:0:0:0: [sdb] Write Protect is off [ 2.631752] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.631794] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.631991] ata3.00: Enabling discard_zeroes_data [ 2.638018] sdb: sdb1 sdb2 sdb3 sdb5 [ 2.638499] ata3.00: Enabling discard_zeroes_data [ 2.638867] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.652621] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.828524] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 3.404407] systemd-journald[244]: Received SIGTERM from PID 1 (systemd). [ 3.441916] printk: systemd: 27 output lines suppressed due to ratelimiting [ 3.589274] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.607857] systemd[1]: Detected architecture x86-64. [ 3.608798] systemd[1]: Set hostname to ... [ 3.609194] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 3.756575] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.756579] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.958457] systemd[1]: initrd-switch-root.service: Succeeded. [ 3.958903] systemd[1]: Stopped Switch Root. [ 3.959127] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart. [ 3.959258] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 3.984211] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro [ 4.068563] systemd-journald[360]: Received request to flush runtime journal from PID 1 [ 4.393484] zram: Added device: zram0 [ 4.412439] zram0: detected capacity change from 0 to 12324737024 [ 5.131685] Lockdown: Xorg: ioperm is restricted; see man kernel_lockdown.7 [ 5.292279] broken atomic modeset userspace detected, disabling atomic [ 5.788505] input: Acer Wireless Radio Control as /devices/LNXSYSTM:00/10251229:00/input/input7 [ 6.082507] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 6.096319] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 6.170378] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 6.171112] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 6.217463] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 6.222102] r8169 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control [ 6.251498] libphy: r8169: probed [ 6.251930] r8169 0000:01:00.1 eth0: RTL8411b, XX:XX:XX:XX:XX:XX, XID 5c8, IRQ 129 [ 6.251935] r8169 0000:01:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.359102] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.507497] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.507502] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.507506] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.507508] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.507511] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.507514] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 6.507517] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 6.536911] io scheduler bfq registered [ 6.575317] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.575857] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.587067] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 6.587240] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 6.587370] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 6.587496] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 6.587616] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 6.587740] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 6.612475] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 6.612478] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.612479] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.612480] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.612481] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.612483] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 6.639610] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.639616] cfg80211: failed to load regulatory.db [ 6.647810] acer_wmi: Acer Laptop ACPI-WMI Extras [ 6.647859] acer_wmi: Function bitmap for Communication Button: 0x801 [ 6.676503] cryptd: max_cpu_qlen set to 1000 [ 6.676680] Bluetooth: Core ver 2.22 [ 6.676752] NET: Registered protocol family 31 [ 6.676754] Bluetooth: HCI device and connection manager initialized [ 6.676760] Bluetooth: HCI socket layer initialized [ 6.676763] Bluetooth: L2CAP socket layer initialized [ 6.676770] Bluetooth: SCO socket layer initialized [ 6.694087] usbcore: registered new interface driver btusb [ 6.703636] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 6.703640] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 6.740693] AVX2 version of gcm_enc/dec engaged. [ 6.740696] AES CTR mode by8 optimization enabled [ 6.759823] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 6.760098] input: Acer WMI hotkeys as /devices/virtual/input/input15 [ 6.761324] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 6.815371] mc: Linux media interface: v0.10 [ 6.867678] videodev: Linux video capture interface: v2.00 [ 6.935614] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5 [ 6.935634] pcieport 0000:00:1c.5: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 6.935638] pcieport 0000:00:1c.5: AER: device [8086:9d15] error status/mask=00000041/00002000 [ 6.935641] pcieport 0000:00:1c.5: AER: [ 0] RxErr [ 6.935643] pcieport 0000:00:1c.5: AER: [ 6] BadTLP [ 6.935651] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5 [ 6.935668] pcieport 0000:00:1c.5: AER: can't find device of ID00e5 [ 6.935670] pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5 [ 6.935677] pcieport 0000:00:1c.5: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 6.935679] pcieport 0000:00:1c.5: AER: device [8086:9d15] error status/mask=00001000/00002000 [ 6.935682] pcieport 0000:00:1c.5: AER: [12] Timeout [ 6.977197] uvcvideo: Found UVC 1.00 device HD WebCam (0408:a060) [ 7.005183] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized! [ 7.005189] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized! [ 7.005192] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized! [ 7.005440] input: HD WebCam: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input16 [ 7.005720] usbcore: registered new interface driver uvcvideo [ 7.005722] USB Video Class driver (1.1.1) [ 7.045304] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 11ad:08a6 [ 7.045310] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 7.046424] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877 [ 7.116728] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a [ 7.122880] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [ 7.175155] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [ 7.175164] psmouse serio1: synaptics: Your touchpad (PNP: PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 7.199866] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 7.218569] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 7.239592] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3218, fw id: 2311988 [ 7.289080] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 7.305237] ath: EEPROM regdomain: 0x69 [ 7.305238] ath: EEPROM indicates we should expect a direct regpair map [ 7.305241] ath: Country alpha2 being used: 00 [ 7.305242] ath: Regpair used: 0x69 [ 7.305548] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 7.306663] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 7.307779] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 7.308892] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 7.310013] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 [ 7.310017] psmouse serio1: issuing reconnect request [ 7.450874] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.786328] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.786330] Bluetooth: BNEP filters: protocol multicast [ 7.786338] Bluetooth: BNEP socket layer initialized [ 7.821593] Bluetooth: RFCOMM TTY layer initialized [ 7.821601] Bluetooth: RFCOMM socket layer initialized [ 7.821607] Bluetooth: RFCOMM ver 1.11 [ 8.006486] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [ 8.046376] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [ 8.303610] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null) [ 9.312806] r8169 0000:01:00.1 enp1s0f1: renamed from eth0 [ 9.570389] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 9.628734] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 9.646478] intel_rapl_common: Found RAPL domain package [ 9.646481] intel_rapl_common: Found RAPL domain core [ 9.646484] intel_rapl_common: Found RAPL domain uncore [ 9.646485] intel_rapl_common: Found RAPL domain dram [ 9.901722] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [ 10.035252] r8169 0000:01:00.1 enp1s0f1: Link is Down [ 10.050197] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5 [ 10.050210] pcieport 0000:00:1c.5: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 10.050215] pcieport 0000:00:1c.5: AER: device [8086:9d15] error status/mask=00000001/00002000 [ 10.050219] pcieport 0000:00:1c.5: AER: [ 0] RxErr [ 10.085073] pcieport 0000:00:1c.5: AER: Multiple Corrected error received: 0000:00:1c.5 [ 10.085087] pcieport 0000:00:1c.5: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [ 10.085090] pcieport 0000:00:1c.5: AER: device [8086:9d15] error status/mask=00000001/00002000 [ 10.085094] pcieport 0000:00:1c.5: AER: [ 0] RxErr [ 10.143222] Adding 12035872k swap on /dev/zram0. Priority:-2 extents:1 across:12035872k SSFS [ 10.288799] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 12.396325] rfkill: input handler disabled [ 15.082090] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 15.116263] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 15.219251] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 15.323244] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 15.427242] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 20.136638] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 20.167736] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 20.271293] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 20.375272] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 20.479285] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 25.589578] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 25.620414] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 25.723227] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 25.827234] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 25.931228] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 31.537920] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 31.569373] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 31.671694] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 31.775674] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 31.879663] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 41.542528] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 41.574306] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 41.679291] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 41.787301] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 41.891285] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 56.509948] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 56.542307] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 56.546906] wlp2s0: authenticated [ 56.551195] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 56.558815] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=1) [ 56.561514] wlp2s0: associated [ 56.571501] ath: EEPROM regdomain: 0x8283 [ 56.571502] ath: EEPROM indicates we should expect a country code [ 56.571504] ath: doing EEPROM country->regdmn map search [ 56.571505] ath: country maps to regdmn code: 0x3d [ 56.571506] ath: Country alpha2 being used: RU [ 56.571506] ath: Regpair used: 0x3d [ 56.571508] ath: regdomain 0x8283 dynamically updated by country element [ 56.614820] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 56.642450] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 8487.026526] PM: suspend entry (deep) [ 8487.029712] Filesystems sync: 0.003 seconds [ 8487.030843] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 8487.033686] OOM killer disabled. [ 8487.033686] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8487.035067] printk: Suspending console(s) (use no_console_suspend to debug) [ 8487.065195] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 8487.080251] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 8487.080662] sd 1:0:0:0: [sda] Stopping disk [ 8487.084572] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 8487.088221] sd 2:0:0:0: [sdb] Stopping disk [ 8488.019717] ACPI: EC: interrupt blocked [ 8488.060652] ACPI: Preparing to enter system sleep state S3 [ 8488.061286] ACPI: EC: event blocked [ 8488.061287] ACPI: EC: EC stopped [ 8488.061288] PM: Saving platform NVS memory [ 8488.061359] Disabling non-boot CPUs ... [ 8488.062822] smpboot: CPU 1 is now offline [ 8488.066178] smpboot: CPU 2 is now offline [ 8488.069732] smpboot: CPU 3 is now offline [ 8488.073263] smpboot: CPU 4 is now offline [ 8488.077048] smpboot: CPU 5 is now offline [ 8488.080773] smpboot: CPU 6 is now offline [ 8488.084284] smpboot: CPU 7 is now offline [ 8488.088724] ACPI: Low-level resume complete [ 8488.088832] ACPI: EC: EC started [ 8488.088833] PM: Restoring platform NVS memory [ 8488.092254] Enabling non-boot CPUs ... [ 8488.092318] x86: Booting SMP configuration: [ 8488.092319] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 8488.095245] microcode: sig=0x806ea, pf=0x80, revision=0x84 [ 8488.097725] microcode: updated to revision 0xc6, date = 2019-08-14 [ 8488.098134] CPU1 is up [ 8488.098179] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 8488.101602] CPU2 is up [ 8488.101645] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 8488.105091] CPU3 is up [ 8488.105133] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 8488.105796] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [ 8488.106346] CPU4 is up [ 8488.106395] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 8488.107371] CPU5 is up [ 8488.107414] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 8488.108405] CPU6 is up [ 8488.108445] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 8488.109466] CPU7 is up [ 8488.113875] ACPI: Waking up from system sleep state S3 [ 8488.122690] ACPI: button: The lid device is not compliant to SW_LID. [ 8488.123114] ACPI: EC: interrupt unblocked [ 8488.220050] ACPI: EC: event unblocked [ 8488.220501] sd 1:0:0:0: [sda] Starting disk [ 8488.220504] sd 2:0:0:0: [sdb] Starting disk [ 8488.429564] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 8488.459232] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 8488.534577] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 8488.534599] ata1: SATA link down (SStatus 4 SControl 300) [ 8488.648971] ata3.00: configured for UDMA/133 [ 8488.659142] ahci 0000:00:17.0: port does not support device sleep [ 8488.686682] ata3.00: Enabling discard_zeroes_data [ 8488.735399] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [ 8488.917167] OOM killer enabled. [ 8488.917168] Restarting tasks ... [ 8488.919508] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 8488.921679] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 8488.921684] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 8488.928303] done. [ 8488.965243] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [ 8488.975915] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 8488.989683] PM: suspend exit [ 8488.999069] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [ 8493.539028] ata2: link is slow to respond, please be patient (ready=0) [ 8493.629985] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 8493.661600] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 8493.763046] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 8493.867047] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 8493.971094] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 8498.247028] ata2: COMRESET failed (errno=-16) [ 8498.562953] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8498.674580] ata2.00: configured for UDMA/133 [ 8498.920721] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [ 8499.031254] r8169 0000:01:00.1 enp1s0f1: Link is Down [ 8503.934174] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 8503.967660] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 8504.070930] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 8504.174958] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [ 8504.278932] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [ 8508.996605] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 8509.027759] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 8509.035149] wlp2s0: authenticated [ 8509.038946] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 8509.049072] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=2) [ 8509.051665] wlp2s0: associated [ 8509.060242] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 8509.068844] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 8509.094350] ath: EEPROM regdomain: 0x8283 [ 8509.094352] ath: EEPROM indicates we should expect a country code [ 8509.094353] ath: doing EEPROM country->regdmn map search [ 8509.094354] ath: country maps to regdmn code: 0x3d [ 8509.094355] ath: Country alpha2 being used: RU [ 8509.094356] ath: Regpair used: 0x3d [ 8509.094358] ath: regdomain 0x8283 dynamically updated by country element [ 9957.594424] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 9957.615622] usb 2-1: New USB device found, idVendor=0951, idProduct=16ae, bcdDevice= 1.10 [ 9957.615625] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9957.615627] usb 2-1: Product: DT microDuo 3C [ 9957.615628] usb 2-1: Manufacturer: Kingston [ 9957.615630] usb 2-1: SerialNumber: ... [ 9957.636520] usb-storage 2-1:1.0: USB Mass Storage device detected [ 9957.636857] scsi host3: usb-storage 2-1:1.0 [ 9957.636997] usbcore: registered new interface driver usb-storage [ 9957.639843] usbcore: registered new interface driver uas [ 9958.640362] scsi 3:0:0:0: Direct-Access Kingston DT microDuo 3C PMAP PQ: 0 ANSI: 6 [ 9958.640802] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 9958.641883] sd 3:0:0:0: [sdc] 121110528 512-byte logical blocks: (62.0 GB/57.8 GiB) [ 9958.642486] sd 3:0:0:0: [sdc] Write Protect is off [ 9958.642490] sd 3:0:0:0: [sdc] Mode Sense: 45 00 00 00 [ 9958.643095] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 9958.668005] sdc: sdc1 [ 9958.672400] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 9974.128000] acer_wmi: Unknown function number - 8 - 1 [10848.312367] usb 2-1: USB disconnect, device number 2 [12388.868605] acer_wmi: Unknown function number - 8 - 0 [12892.097355] acer_wmi: Unknown function number - 8 - 1 [14076.863819] acer_wmi: Unknown function number - 8 - 0 [15633.756468] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [19047.801540] perf: interrupt took too long (3136 > 3131), lowering kernel.perf_event_max_sample_rate to 63750 [21417.857411] acer_wmi: Unknown function number - 8 - 1 [24128.019297] acer_wmi: Unknown function number - 8 - 0 [29237.231275] acer_wmi: Unknown function number - 8 - 1 [31953.099165] mce: CPU4: Core temperature above threshold, cpu clock throttled (total events = 1) [31953.099166] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [31953.099167] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [31953.099168] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1) [31953.099169] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [31953.099170] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1) [31953.099171] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [31953.099172] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1) [31953.099203] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [31953.099203] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1) [31953.102164] mce: CPU0: Core temperature/speed normal [31953.102164] mce: CPU4: Core temperature/speed normal [31953.102165] mce: CPU2: Package temperature/speed normal [31953.102166] mce: CPU3: Package temperature/speed normal [31953.102167] mce: CPU6: Package temperature/speed normal [31953.102168] mce: CPU1: Package temperature/speed normal [31953.102168] mce: CPU5: Package temperature/speed normal [31953.102169] mce: CPU7: Package temperature/speed normal [31953.102169] mce: CPU4: Package temperature/speed normal [31953.102170] mce: CPU0: Package temperature/speed normal [33443.824846] acer_wmi: Unknown function number - 8 - 0 [33707.293894] perf: interrupt took too long (3925 > 3920), lowering kernel.perf_event_max_sample_rate to 50750 [39400.120659] PM: suspend entry (deep) [39400.217875] Filesystems sync: 0.097 seconds [39400.218428] Freezing user space processes ... (elapsed 0.002 seconds) done. [39400.220831] OOM killer disabled. [39400.220831] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [39400.222134] printk: Suspending console(s) (use no_console_suspend to debug) [39400.222591] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [39400.242508] sd 1:0:0:0: [sda] Synchronizing SCSI cache [39400.242598] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [39400.243430] sd 2:0:0:0: [sdb] Stopping disk [39400.252518] sd 1:0:0:0: [sda] Stopping disk [39401.233884] ACPI: EC: interrupt blocked [39401.274903] ACPI: Preparing to enter system sleep state S3 [39401.275525] ACPI: EC: event blocked [39401.275525] ACPI: EC: EC stopped [39401.275526] PM: Saving platform NVS memory [39401.275597] Disabling non-boot CPUs ... [39401.277046] smpboot: CPU 1 is now offline [39401.280187] smpboot: CPU 2 is now offline [39401.283650] smpboot: CPU 3 is now offline [39401.287278] smpboot: CPU 4 is now offline [39401.290341] smpboot: CPU 5 is now offline [39401.293393] smpboot: CPU 6 is now offline [39401.296421] smpboot: CPU 7 is now offline [39401.300355] ACPI: Low-level resume complete [39401.300463] ACPI: EC: EC started [39401.300464] PM: Restoring platform NVS memory [39401.303711] Enabling non-boot CPUs ... [39401.303777] x86: Booting SMP configuration: [39401.303779] smpboot: Booting Node 0 Processor 1 APIC 0x2 [39401.304307] microcode: sig=0x806ea, pf=0x80, revision=0x84 [39401.307184] CPU1 is up [39401.307230] smpboot: Booting Node 0 Processor 2 APIC 0x4 [39401.310645] CPU2 is up [39401.310688] smpboot: Booting Node 0 Processor 3 APIC 0x6 [39401.314119] CPU3 is up [39401.314162] smpboot: Booting Node 0 Processor 4 APIC 0x1 [39401.314811] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [39401.315357] CPU4 is up [39401.315406] smpboot: Booting Node 0 Processor 5 APIC 0x3 [39401.316374] CPU5 is up [39401.316416] smpboot: Booting Node 0 Processor 6 APIC 0x5 [39401.317413] CPU6 is up [39401.317455] smpboot: Booting Node 0 Processor 7 APIC 0x7 [39401.318475] CPU7 is up [39401.322869] ACPI: Waking up from system sleep state S3 [39401.329527] ACPI: EC: interrupt unblocked [39401.430220] ACPI: EC: event unblocked [39401.431091] sd 1:0:0:0: [sda] Starting disk [39401.431093] sd 2:0:0:0: [sdb] Starting disk [39401.640083] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [39401.669518] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [39401.745897] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [39401.745919] ata1: SATA link down (SStatus 4 SControl 300) [39401.853166] ata3.00: configured for UDMA/133 [39401.863301] ahci 0000:00:17.0: port does not support device sleep [39401.865963] ata3.00: Enabling discard_zeroes_data [39401.945554] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [39402.107771] OOM killer enabled. [39402.107772] Restarting tasks ... [39402.113390] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [39402.114174] done. [39402.114606] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [39402.114610] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [39402.160861] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [39402.169083] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [39402.175944] PM: suspend exit [39402.193740] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [39403.805335] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [39403.869905] ata2.00: failed to read native max address (err_mask=0x100) [39403.869906] ata2.00: HPA support seems broken, skipping HPA handling [39403.869908] ata2.00: revalidation failed (errno=-5) [39406.822304] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [39406.853886] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39406.957275] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [39407.065215] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [39407.169288] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [39409.276799] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [39409.312777] ata2.00: configured for UDMA/133 [39409.642130] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [39409.749282] r8169 0000:01:00.1 enp1s0f1: Link is Down [39414.619297] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [39414.652739] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39414.657327] wlp2s0: authenticated [39414.661185] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39414.669092] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=10) [39414.671907] wlp2s0: associated [39414.683747] ath: EEPROM regdomain: 0x8283 [39414.683748] ath: EEPROM indicates we should expect a country code [39414.683749] ath: doing EEPROM country->regdmn map search [39414.683751] ath: country maps to regdmn code: 0x3d [39414.683752] ath: Country alpha2 being used: RU [39414.683752] ath: Regpair used: 0x3d [39414.683754] ath: regdomain 0x8283 dynamically updated by country element [39414.689310] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [39414.710099] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [45179.268586] acer_wmi: Unknown function number - 8 - 1 [47007.639029] acer_wmi: Unknown function number - 8 - 0 [47029.718895] acer_wmi: Unknown function number - 8 - 1 [52283.979590] PM: suspend entry (deep) [52284.076191] Filesystems sync: 0.096 seconds [52284.076721] Freezing user space processes ... (elapsed 0.001 seconds) done. [52284.078647] OOM killer disabled. [52284.078647] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [52284.079881] printk: Suspending console(s) (use no_console_suspend to debug) [52284.080650] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [52284.108783] sd 1:0:0:0: [sda] Synchronizing SCSI cache [52284.108799] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [52284.109586] sd 2:0:0:0: [sdb] Stopping disk [52284.131770] sd 1:0:0:0: [sda] Stopping disk [52285.087950] ACPI: EC: interrupt blocked [52285.128944] ACPI: Preparing to enter system sleep state S3 [52285.129300] ACPI: EC: event blocked [52285.129300] ACPI: EC: EC stopped [52285.129300] PM: Saving platform NVS memory [52285.129345] Disabling non-boot CPUs ... [52285.130592] smpboot: CPU 1 is now offline [52285.132692] smpboot: CPU 2 is now offline [52285.134794] smpboot: CPU 3 is now offline [52285.137085] smpboot: CPU 4 is now offline [52285.139155] smpboot: CPU 5 is now offline [52285.141145] smpboot: CPU 6 is now offline [52285.143294] smpboot: CPU 7 is now offline [52285.145962] ACPI: Low-level resume complete [52285.146046] ACPI: EC: EC started [52285.146047] PM: Restoring platform NVS memory [52285.148105] Enabling non-boot CPUs ... [52285.148148] x86: Booting SMP configuration: [52285.148149] smpboot: Booting Node 0 Processor 1 APIC 0x2 [52285.148449] microcode: sig=0x806ea, pf=0x80, revision=0x84 [52285.150070] CPU1 is up [52285.150097] smpboot: Booting Node 0 Processor 2 APIC 0x4 [52285.152021] CPU2 is up [52285.152048] smpboot: Booting Node 0 Processor 3 APIC 0x6 [52285.153993] CPU3 is up [52285.154019] smpboot: Booting Node 0 Processor 4 APIC 0x1 [52285.154370] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [52285.154707] CPU4 is up [52285.154737] smpboot: Booting Node 0 Processor 5 APIC 0x3 [52285.155315] CPU5 is up [52285.155342] smpboot: Booting Node 0 Processor 6 APIC 0x5 [52285.155930] CPU6 is up [52285.155956] smpboot: Booting Node 0 Processor 7 APIC 0x7 [52285.156557] CPU7 is up [52285.159308] ACPI: Waking up from system sleep state S3 [52285.163128] ACPI: EC: interrupt unblocked [52285.267791] ACPI: EC: event unblocked [52285.268452] sd 1:0:0:0: [sda] Starting disk [52285.268463] sd 2:0:0:0: [sdb] Starting disk [52285.481471] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [52285.503286] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [52285.582647] ata1: SATA link down (SStatus 4 SControl 300) [52285.582983] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [52285.688855] ata3.00: configured for UDMA/133 [52285.699012] ahci 0000:00:17.0: port does not support device sleep [52285.699251] ata3.00: Enabling discard_zeroes_data [52285.779260] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [52285.941440] OOM killer enabled. [52285.941441] Restarting tasks ... [52285.950620] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [52285.951299] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [52285.951303] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [52285.951465] done. [52285.996535] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [52286.005654] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [52286.013298] PM: suspend exit [52286.031239] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [52290.606954] ata2: link is slow to respond, please be patient (ready=0) [52290.647204] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [52290.678794] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [52290.686528] wlp2s0: authenticated [52290.694899] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [52290.704335] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=5) [52290.706583] wlp2s0: associated [52290.717312] ath: EEPROM regdomain: 0x8283 [52290.717314] ath: EEPROM indicates we should expect a country code [52290.717315] ath: doing EEPROM country->regdmn map search [52290.717316] ath: country maps to regdmn code: 0x3d [52290.717317] ath: Country alpha2 being used: RU [52290.717317] ath: Regpair used: 0x3d [52290.717319] ath: regdomain 0x8283 dynamically updated by country element [52290.761334] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [52295.290882] ata2: COMRESET failed (errno=-16) [52295.606061] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [52296.116866] ata2.00: configured for UDMA/133 [52296.368227] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [52296.391409] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [52296.498914] r8169 0000:01:00.1 enp1s0f1: Link is Down [52301.413042] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [52301.446231] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [52301.451937] wlp2s0: authenticated [52301.454897] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [52301.462755] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=4) [52301.465562] wlp2s0: associated [52301.473930] ath: EEPROM regdomain: 0x8283 [52301.473931] ath: EEPROM indicates we should expect a country code [52301.473933] ath: doing EEPROM country->regdmn map search [52301.473934] ath: country maps to regdmn code: 0x3d [52301.473935] ath: Country alpha2 being used: RU [52301.473935] ath: Regpair used: 0x3d [52301.473937] ath: regdomain 0x8283 dynamically updated by country element [52301.476288] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [52301.511861] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [55063.926092] PM: suspend entry (deep) [55064.149465] Filesystems sync: 0.223 seconds [55064.149853] Freezing user space processes ... (elapsed 0.002 seconds) done. [55064.152295] OOM killer disabled. [55064.152296] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [55064.153694] printk: Suspending console(s) (use no_console_suspend to debug) [55064.154663] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [55064.168155] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [55064.168946] sd 2:0:0:0: [sdb] Stopping disk [55064.176172] sd 1:0:0:0: [sda] Synchronizing SCSI cache [55064.204796] sd 1:0:0:0: [sda] Stopping disk [55065.263595] ACPI: EC: interrupt blocked [55065.304594] ACPI: Preparing to enter system sleep state S3 [55065.305223] ACPI: EC: event blocked [55065.305224] ACPI: EC: EC stopped [55065.305225] PM: Saving platform NVS memory [55065.305296] Disabling non-boot CPUs ... [55065.306754] smpboot: CPU 1 is now offline [55065.309487] smpboot: CPU 2 is now offline [55065.312133] smpboot: CPU 3 is now offline [55065.315368] smpboot: CPU 4 is now offline [55065.318086] smpboot: CPU 5 is now offline [55065.320647] smpboot: CPU 6 is now offline [55065.323399] smpboot: CPU 7 is now offline [55065.327037] ACPI: Low-level resume complete [55065.327145] ACPI: EC: EC started [55065.327146] PM: Restoring platform NVS memory [55065.330375] Enabling non-boot CPUs ... [55065.330445] x86: Booting SMP configuration: [55065.330446] smpboot: Booting Node 0 Processor 1 APIC 0x2 [55065.330975] microcode: sig=0x806ea, pf=0x80, revision=0x84 [55065.333853] CPU1 is up [55065.333897] smpboot: Booting Node 0 Processor 2 APIC 0x4 [55065.337308] CPU2 is up [55065.337353] smpboot: Booting Node 0 Processor 3 APIC 0x6 [55065.340795] CPU3 is up [55065.340837] smpboot: Booting Node 0 Processor 4 APIC 0x1 [55065.341506] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [55065.342051] CPU4 is up [55065.342100] smpboot: Booting Node 0 Processor 5 APIC 0x3 [55065.343079] CPU5 is up [55065.343125] smpboot: Booting Node 0 Processor 6 APIC 0x5 [55065.344123] CPU6 is up [55065.344166] smpboot: Booting Node 0 Processor 7 APIC 0x7 [55065.345178] CPU7 is up [55065.349572] ACPI: Waking up from system sleep state S3 [55065.356209] ACPI: EC: interrupt unblocked [55065.459909] ACPI: EC: event unblocked [55065.460918] sd 2:0:0:0: [sdb] Starting disk [55065.460928] sd 1:0:0:0: [sda] Starting disk [55065.669392] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [55065.695195] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [55065.774340] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [55065.774367] ata1: SATA link down (SStatus 4 SControl 300) [55065.884062] ata3.00: configured for UDMA/133 [55065.894214] ahci 0000:00:17.0: port does not support device sleep [55065.895490] ata3.00: Enabling discard_zeroes_data [55065.971240] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [55066.121867] OOM killer enabled. [55066.121868] Restarting tasks ... [55066.124251] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [55066.124808] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [55066.124812] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [55066.128466] done. [55066.179228] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [55066.197477] PM: suspend exit [55066.256520] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [55066.290726] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [55070.814954] ata2: link is slow to respond, please be patient (ready=0) [55070.832779] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [55070.864550] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [55070.966971] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [55071.070898] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [55071.174986] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [55075.494851] ata2: COMRESET failed (errno=-16) [55075.810336] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [55075.847485] ata2.00: configured for UDMA/133 [55076.134676] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [55076.246747] r8169 0000:01:00.1 enp1s0f1: Link is Down [55081.145333] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [55081.179084] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [55081.282838] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [55081.386825] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [55081.490769] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [55086.212351] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [55086.243489] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [55086.346764] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [55086.450766] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [55086.554758] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [55091.660496] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [55091.691681] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [55091.794683] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [55091.898702] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [55092.002698] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [55097.610023] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [55097.642011] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [55097.646447] wlp2s0: authenticated [55097.654556] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [55097.662109] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=4) [55097.664636] wlp2s0: associated [55097.675567] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [55097.676577] ath: EEPROM regdomain: 0x8283 [55097.676579] ath: EEPROM indicates we should expect a country code [55097.676581] ath: doing EEPROM country->regdmn map search [55097.676583] ath: country maps to regdmn code: 0x3d [55097.676584] ath: Country alpha2 being used: RU [55097.676585] ath: Regpair used: 0x3d [55097.676587] ath: regdomain 0x8283 dynamically updated by country element [55097.744962] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [62682.292943] acer_wmi: Unknown function number - 8 - 1 [64753.479317] acer_wmi: Unknown function number - 8 - 0 [69063.178091] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [69063.199472] usb 2-1: New USB device found, idVendor=0951, idProduct=16ae, bcdDevice= 1.10 [69063.199474] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [69063.199477] usb 2-1: Product: DT microDuo 3C [69063.199478] usb 2-1: Manufacturer: Kingston [69063.199479] usb 2-1: SerialNumber: ... [69063.200943] usb-storage 2-1:1.0: USB Mass Storage device detected [69063.201296] scsi host3: usb-storage 2-1:1.0 [69064.231990] scsi 3:0:0:0: Direct-Access Kingston DT microDuo 3C PMAP PQ: 0 ANSI: 6 [69064.232377] sd 3:0:0:0: Attached scsi generic sg2 type 0 [69064.233439] sd 3:0:0:0: [sdc] 121110528 512-byte logical blocks: (62.0 GB/57.8 GiB) [69064.234074] sd 3:0:0:0: [sdc] Write Protect is off [69064.234077] sd 3:0:0:0: [sdc] Mode Sense: 45 00 00 00 [69064.234709] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [69064.415307] sdc: sdc1 [69064.418557] sd 3:0:0:0: [sdc] Attached SCSI removable disk [69472.034744] acer_wmi: Unknown function number - 8 - 1 [70160.537448] acer_wmi: Unknown function number - 8 - 0 [70184.707499] usb 2-1: USB disconnect, device number 3 [73827.796533] acer_wmi: Unknown function number - 8 - 1 [75317.423565] perf: interrupt took too long (4909 > 4906), lowering kernel.perf_event_max_sample_rate to 40500 [77133.956258] usb 2-1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [77133.977383] usb 2-1: New USB device found, idVendor=0951, idProduct=16ae, bcdDevice= 1.10 [77133.977384] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [77133.977385] usb 2-1: Product: DT microDuo 3C [77133.977386] usb 2-1: Manufacturer: Kingston [77133.977387] usb 2-1: SerialNumber: ... [77133.978867] usb-storage 2-1:1.0: USB Mass Storage device detected [77133.979083] scsi host3: usb-storage 2-1:1.0 [77135.006075] scsi 3:0:0:0: Direct-Access Kingston DT microDuo 3C PMAP PQ: 0 ANSI: 6 [77135.006324] sd 3:0:0:0: Attached scsi generic sg2 type 0 [77135.007360] sd 3:0:0:0: [sdc] 121110528 512-byte logical blocks: (62.0 GB/57.8 GiB) [77135.007955] sd 3:0:0:0: [sdc] Write Protect is off [77135.007956] sd 3:0:0:0: [sdc] Mode Sense: 45 00 00 00 [77135.008511] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [77137.000333] sdc: sdc1 [77137.003963] sd 3:0:0:0: [sdc] Attached SCSI removable disk [77367.024006] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 1) [77367.024007] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 1) [77367.024008] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 3) [77367.024009] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 3) [77367.024010] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 3) [77367.024011] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 3) [77367.024011] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 3) [77367.024013] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 3) [77367.024052] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 3) [77367.024052] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 3) [77367.025027] mce: CPU7: Core temperature/speed normal [77367.025028] mce: CPU3: Core temperature/speed normal [77367.025029] mce: CPU1: Package temperature/speed normal [77367.025030] mce: CPU0: Package temperature/speed normal [77367.025030] mce: CPU4: Package temperature/speed normal [77367.025031] mce: CPU2: Package temperature/speed normal [77367.025032] mce: CPU5: Package temperature/speed normal [77367.025033] mce: CPU6: Package temperature/speed normal [77367.025033] mce: CPU3: Package temperature/speed normal [77367.025034] mce: CPU7: Package temperature/speed normal [77676.174718] usb 2-1: USB disconnect, device number 4 [77712.355228] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 12) [77712.355229] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 43) [77712.355230] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 43) [77712.355231] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 12) [77712.355232] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 43) [77712.355233] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 43) [77712.355234] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 43) [77712.355235] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 43) [77712.355259] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 43) [77712.355260] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 43) [77712.356186] mce: CPU7: Core temperature/speed normal [77712.356187] mce: CPU3: Core temperature/speed normal [77712.356188] mce: CPU0: Package temperature/speed normal [77712.356189] mce: CPU5: Package temperature/speed normal [77712.356189] mce: CPU1: Package temperature/speed normal [77712.356190] mce: CPU4: Package temperature/speed normal [77712.356191] mce: CPU3: Package temperature/speed normal [77712.356192] mce: CPU7: Package temperature/speed normal [77712.356216] mce: CPU2: Package temperature/speed normal [77712.356217] mce: CPU6: Package temperature/speed normal [78472.853647] mce: CPU4: Core temperature above threshold, cpu clock throttled (total events = 37) [78472.853648] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 37) [78472.853649] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 110) [78472.853650] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 110) [78472.853651] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 110) [78472.853652] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 110) [78472.853653] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 110) [78472.853654] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 110) [78472.853675] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 110) [78472.853676] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 110) [78472.857592] mce: CPU4: Core temperature/speed normal [78472.857593] mce: CPU6: Package temperature/speed normal [78472.857594] mce: CPU3: Package temperature/speed normal [78472.857595] mce: CPU5: Package temperature/speed normal [78472.857595] mce: CPU2: Package temperature/speed normal [78472.857596] mce: CPU7: Package temperature/speed normal [78472.857596] mce: CPU1: Package temperature/speed normal [78472.857598] mce: CPU0: Core temperature/speed normal [78472.857599] mce: CPU0: Package temperature/speed normal [78472.857599] mce: CPU4: Package temperature/speed normal [79089.827988] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 90) [79089.827989] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 90) [79089.827990] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 162) [79089.827991] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 162) [79089.827992] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 162) [79089.827993] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 162) [79089.827994] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 162) [79089.827995] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 162) [79089.827996] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 162) [79089.827998] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 162) [79831.700475] acer_wmi: Unknown function number - 8 - 0 [85106.134134] acer_wmi: Unknown function number - 8 - 1 [86160.408884] acer_wmi: Unknown function number - 8 - 0 [89226.218316] acer_wmi: Unknown function number - 8 - 1 [90418.158000] PM: suspend entry (deep) [90418.750419] Filesystems sync: 0.592 seconds [90418.751364] Freezing user space processes ... (elapsed 0.002 seconds) done. [90418.753425] OOM killer disabled. [90418.753425] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [90418.754812] printk: Suspending console(s) (use no_console_suspend to debug) [90418.755554] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [90418.784553] sd 1:0:0:0: [sda] Synchronizing SCSI cache [90418.784605] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [90418.785625] sd 2:0:0:0: [sdb] Stopping disk [90418.804923] sd 1:0:0:0: [sda] Stopping disk [90420.055695] ACPI: EC: interrupt blocked [90420.096703] ACPI: Preparing to enter system sleep state S3 [90420.097049] ACPI: EC: event blocked [90420.097049] ACPI: EC: EC stopped [90420.097050] PM: Saving platform NVS memory [90420.097095] Disabling non-boot CPUs ... [90420.098347] smpboot: CPU 1 is now offline [90420.100808] smpboot: CPU 2 is now offline [90420.102947] smpboot: CPU 3 is now offline [90420.105182] smpboot: CPU 4 is now offline [90420.107479] smpboot: CPU 5 is now offline [90420.109756] smpboot: CPU 6 is now offline [90420.111986] smpboot: CPU 7 is now offline [90420.114935] ACPI: Low-level resume complete [90420.115019] ACPI: EC: EC started [90420.115020] PM: Restoring platform NVS memory [90420.117079] Enabling non-boot CPUs ... [90420.117121] x86: Booting SMP configuration: [90420.117122] smpboot: Booting Node 0 Processor 1 APIC 0x2 [90420.117423] microcode: sig=0x806ea, pf=0x80, revision=0x84 [90420.119041] CPU1 is up [90420.119069] smpboot: Booting Node 0 Processor 2 APIC 0x4 [90420.121000] CPU2 is up [90420.121027] smpboot: Booting Node 0 Processor 3 APIC 0x6 [90420.123062] CPU3 is up [90420.123090] smpboot: Booting Node 0 Processor 4 APIC 0x1 [90420.123439] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [90420.123780] CPU4 is up [90420.123810] smpboot: Booting Node 0 Processor 5 APIC 0x3 [90420.124390] CPU5 is up [90420.124417] smpboot: Booting Node 0 Processor 6 APIC 0x5 [90420.125002] CPU6 is up [90420.125029] smpboot: Booting Node 0 Processor 7 APIC 0x7 [90420.125633] CPU7 is up [90420.128400] ACPI: Waking up from system sleep state S3 [90420.132200] ACPI: EC: interrupt unblocked [90420.231011] ACPI: EC: event unblocked [90420.231349] sd 2:0:0:0: [sdb] Starting disk [90420.231349] sd 1:0:0:0: [sda] Starting disk [90420.440798] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [90420.466885] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [90420.542659] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [90420.542675] ata1: SATA link down (SStatus 4 SControl 300) [90420.557409] ata3.00: configured for UDMA/133 [90420.567500] ahci 0000:00:17.0: port does not support device sleep [90420.567796] ata3.00: Enabling discard_zeroes_data [90420.747097] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [90420.897517] OOM killer enabled. [90420.897517] Restarting tasks ... [90420.900116] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [90420.900395] done. [90420.900513] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [90420.900515] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [90420.954676] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [90420.960037] PM: suspend exit [90420.963343] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [90420.994521] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [90422.782748] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [90422.786449] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [90422.786450] ata2.00: revalidation failed (errno=-5) [90425.607489] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [90425.639255] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90425.742874] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [90425.846841] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [90425.950848] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [90427.078015] acer_wmi: Unknown function number - 8 - 0 [90428.285265] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [90429.360437] ata2.00: configured for UDMA/133 [90429.554683] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [90429.662902] r8169 0000:01:00.1 enp1s0f1: Link is Down [90434.578935] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [90434.612150] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90434.714994] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [90434.819015] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [90434.922901] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [90439.629068] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [90439.660031] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90439.763499] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [90439.867468] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [90439.971469] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [90445.085295] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [90445.116267] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90445.219594] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [90445.323597] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [90445.427566] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [90451.040053] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [90451.071705] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90451.175664] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [90451.279664] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [90451.383662] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [90461.053516] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [90461.084477] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90461.187353] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [90461.291451] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [90461.395451] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [90476.003765] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [90476.035383] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90476.039712] wlp2s0: authenticated [90476.047663] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [90476.056143] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=1) [90476.059136] wlp2s0: associated [90476.070122] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [90476.076973] ath: EEPROM regdomain: 0x8283 [90476.076975] ath: EEPROM indicates we should expect a country code [90476.076977] ath: doing EEPROM country->regdmn map search [90476.076979] ath: country maps to regdmn code: 0x3d [90476.076980] ath: Country alpha2 being used: RU [90476.076981] ath: Regpair used: 0x3d [90476.076984] ath: regdomain 0x8283 dynamically updated by country element [90476.102651] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [93781.655530] acer_wmi: Unknown function number - 8 - 1 [95962.311796] acer_wmi: Unknown function number - 8 - 0 [99275.878142] usb 2-1: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [99275.899514] usb 2-1: New USB device found, idVendor=0951, idProduct=16ae, bcdDevice= 1.10 [99275.899517] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [99275.899519] usb 2-1: Product: DT microDuo 3C [99275.899520] usb 2-1: Manufacturer: Kingston [99275.899522] usb 2-1: SerialNumber: ... [99275.901514] usb-storage 2-1:1.0: USB Mass Storage device detected [99275.901767] scsi host3: usb-storage 2-1:1.0 [99276.919857] scsi 3:0:0:0: Direct-Access Kingston DT microDuo 3C PMAP PQ: 0 ANSI: 6 [99276.921181] sd 3:0:0:0: [sdc] 121110528 512-byte logical blocks: (62.0 GB/57.8 GiB) [99276.921720] sd 3:0:0:0: [sdc] Write Protect is off [99276.921725] sd 3:0:0:0: [sdc] Mode Sense: 45 00 00 00 [99276.921964] sd 3:0:0:0: Attached scsi generic sg2 type 0 [99276.922299] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [99277.147883] sdc: sdc1 [99277.150589] sd 3:0:0:0: [sdc] Attached SCSI removable disk [100453.478700] usb 2-1: USB disconnect, device number 5 [101898.916593] acer_wmi: Unknown function number - 8 - 1 [103311.050232] PM: suspend entry (deep) [103311.052474] Filesystems sync: 0.002 seconds [103311.053084] Freezing user space processes ... (elapsed 0.002 seconds) done. [103311.055254] OOM killer disabled. [103311.055254] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [103311.056701] printk: Suspending console(s) (use no_console_suspend to debug) [103311.057480] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [103311.085589] sd 1:0:0:0: [sda] Synchronizing SCSI cache [103311.086216] sd 1:0:0:0: [sda] Stopping disk [103311.089537] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [103311.089685] sd 2:0:0:0: [sdb] Stopping disk [103311.992782] ACPI: EC: interrupt blocked [103312.033774] ACPI: Preparing to enter system sleep state S3 [103312.034128] ACPI: EC: event blocked [103312.034129] ACPI: EC: EC stopped [103312.034129] PM: Saving platform NVS memory [103312.034175] Disabling non-boot CPUs ... [103312.035430] smpboot: CPU 1 is now offline [103312.037683] smpboot: CPU 2 is now offline [103312.039868] smpboot: CPU 3 is now offline [103312.042302] smpboot: CPU 4 is now offline [103312.044403] smpboot: CPU 5 is now offline [103312.046546] smpboot: CPU 6 is now offline [103312.048737] smpboot: CPU 7 is now offline [103312.051584] ACPI: Low-level resume complete [103312.051668] ACPI: EC: EC started [103312.051669] PM: Restoring platform NVS memory [103312.053716] Enabling non-boot CPUs ... [103312.053760] x86: Booting SMP configuration: [103312.053761] smpboot: Booting Node 0 Processor 1 APIC 0x2 [103312.054062] microcode: sig=0x806ea, pf=0x80, revision=0x84 [103312.055685] CPU1 is up [103312.055713] smpboot: Booting Node 0 Processor 2 APIC 0x4 [103312.057679] CPU2 is up [103312.057707] smpboot: Booting Node 0 Processor 3 APIC 0x6 [103312.059653] CPU3 is up [103312.059680] smpboot: Booting Node 0 Processor 4 APIC 0x1 [103312.060000] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [103312.060340] CPU4 is up [103312.060370] smpboot: Booting Node 0 Processor 5 APIC 0x3 [103312.060954] CPU5 is up [103312.060980] smpboot: Booting Node 0 Processor 6 APIC 0x5 [103312.061574] CPU6 is up [103312.061601] smpboot: Booting Node 0 Processor 7 APIC 0x7 [103312.062201] CPU7 is up [103312.064964] ACPI: Waking up from system sleep state S3 [103312.068775] ACPI: EC: interrupt unblocked [103312.168613] ACPI: EC: event unblocked [103312.169175] sd 1:0:0:0: [sda] Starting disk [103312.169176] sd 2:0:0:0: [sdb] Starting disk [103312.377834] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [103312.404768] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [103312.482531] ata1: SATA link down (SStatus 4 SControl 300) [103312.482551] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [103312.583440] ata3.00: configured for UDMA/133 [103312.593536] ahci 0000:00:17.0: port does not support device sleep [103312.595992] ata3.00: Enabling discard_zeroes_data [103312.680830] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [103312.832007] OOM killer enabled. [103312.832007] Restarting tasks ... [103312.833158] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [103312.835272] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [103312.835276] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [103312.839890] done. [103312.890088] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [103312.904568] PM: suspend exit [103312.988985] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [103313.020811] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [103314.767760] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [103314.770643] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [103314.770644] ata2.00: revalidation failed (errno=-5) [103317.542651] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [103317.574735] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [103317.578442] wlp2s0: authenticated [103317.579723] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [103317.585629] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=10) [103317.588073] wlp2s0: associated [103317.597559] ath: EEPROM regdomain: 0x8283 [103317.597559] ath: EEPROM indicates we should expect a country code [103317.597560] ath: doing EEPROM country->regdmn map search [103317.597561] ath: country maps to regdmn code: 0x3d [103317.597561] ath: Country alpha2 being used: RU [103317.597561] ath: Regpair used: 0x3d [103317.597562] ath: regdomain 0x8283 dynamically updated by country element [103317.663645] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [103320.120863] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [103320.159255] ata2.00: configured for UDMA/133 [103320.363422] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [103320.378987] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [103320.487742] r8169 0000:01:00.1 enp1s0f1: Link is Down [103320.831057] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [103325.565015] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [103325.600322] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [103325.604106] wlp2s0: authenticated [103325.607965] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [103325.614674] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=5) [103325.617010] wlp2s0: associated [103325.620886] ath: EEPROM regdomain: 0x8283 [103325.620886] ath: EEPROM indicates we should expect a country code [103325.620887] ath: doing EEPROM country->regdmn map search [103325.620887] ath: country maps to regdmn code: 0x3d [103325.620888] ath: Country alpha2 being used: RU [103325.620888] ath: Regpair used: 0x3d [103325.620889] ath: regdomain 0x8283 dynamically updated by country element [103325.637110] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [103325.651083] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [106107.762571] acer_wmi: Unknown function number - 8 - 0 [106340.075431] PM: suspend entry (deep) [106340.078797] Filesystems sync: 0.003 seconds [106340.079181] Freezing user space processes ... (elapsed 0.002 seconds) done. [106340.082131] OOM killer disabled. [106340.082132] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [106340.083527] printk: Suspending console(s) (use no_console_suspend to debug) [106340.084340] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [106340.114159] sd 1:0:0:0: [sda] Synchronizing SCSI cache [106340.114559] sd 1:0:0:0: [sda] Stopping disk [106340.118236] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [106340.119033] sd 2:0:0:0: [sdb] Stopping disk [106340.881624] ACPI: EC: interrupt blocked [106340.922601] ACPI: Preparing to enter system sleep state S3 [106340.923240] ACPI: EC: event blocked [106340.923241] ACPI: EC: EC stopped [106340.923242] PM: Saving platform NVS memory [106340.923313] Disabling non-boot CPUs ... [106340.924778] smpboot: CPU 1 is now offline [106340.927963] smpboot: CPU 2 is now offline [106340.930572] smpboot: CPU 3 is now offline [106340.933540] smpboot: CPU 4 is now offline [106340.936032] smpboot: CPU 5 is now offline [106340.938589] smpboot: CPU 6 is now offline [106340.941234] smpboot: CPU 7 is now offline [106340.944911] ACPI: Low-level resume complete [106340.945020] ACPI: EC: EC started [106340.945020] PM: Restoring platform NVS memory [106340.948285] Enabling non-boot CPUs ... [106340.948354] x86: Booting SMP configuration: [106340.948355] smpboot: Booting Node 0 Processor 1 APIC 0x2 [106340.948884] microcode: sig=0x806ea, pf=0x80, revision=0x84 [106340.951759] CPU1 is up [106340.951807] smpboot: Booting Node 0 Processor 2 APIC 0x4 [106340.955214] CPU2 is up [106340.955256] smpboot: Booting Node 0 Processor 3 APIC 0x6 [106340.958687] CPU3 is up [106340.958729] smpboot: Booting Node 0 Processor 4 APIC 0x1 [106340.959370] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [106340.959914] CPU4 is up [106340.959962] smpboot: Booting Node 0 Processor 5 APIC 0x3 [106340.960953] CPU5 is up [106340.960996] smpboot: Booting Node 0 Processor 6 APIC 0x5 [106340.961989] CPU6 is up [106340.962031] smpboot: Booting Node 0 Processor 7 APIC 0x7 [106340.963058] CPU7 is up [106340.967466] ACPI: Waking up from system sleep state S3 [106340.974086] ACPI: EC: interrupt unblocked [106341.073948] ACPI: EC: event unblocked [106341.074935] sd 1:0:0:0: [sda] Starting disk [106341.074941] sd 2:0:0:0: [sdb] Starting disk [106341.283691] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [106341.309234] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [106341.388895] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [106341.388922] ata1: SATA link down (SStatus 4 SControl 300) [106341.492788] ata3.00: configured for UDMA/133 [106341.502874] ahci 0000:00:17.0: port does not support device sleep [106341.506442] ata3.00: Enabling discard_zeroes_data [106341.585281] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [106341.735881] OOM killer enabled. [106341.735882] Restarting tasks ... [106341.737996] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [106341.738935] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [106341.738941] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [106341.743873] done. [106341.792961] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [106341.807551] PM: suspend exit [106341.809791] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [106341.840890] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [106346.433015] ata2: link is slow to respond, please be patient (ready=0) [106346.443975] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [106346.475673] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [106346.577055] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [106346.680910] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [106346.785009] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [106351.112986] ata2: COMRESET failed (errno=-16) [106351.428965] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [106351.467150] ata2.00: configured for UDMA/133 [106351.794319] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [106351.900886] r8169 0000:01:00.1 enp1s0f1: Link is Down [106356.815735] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [106356.849184] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [106356.952859] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [106357.056852] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [106357.160842] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [106361.870700] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [106361.901393] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [106362.004861] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [106362.108858] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [106362.212903] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [106367.318517] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [106367.349623] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [106367.358547] wlp2s0: authenticated [106367.360873] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [106367.372745] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=6) [106367.375616] wlp2s0: associated [106367.385210] ath: EEPROM regdomain: 0x8283 [106367.385211] ath: EEPROM indicates we should expect a country code [106367.385212] ath: doing EEPROM country->regdmn map search [106367.385214] ath: country maps to regdmn code: 0x3d [106367.385215] ath: Country alpha2 being used: RU [106367.385215] ath: Regpair used: 0x3d [106367.385217] ath: regdomain 0x8283 dynamically updated by country element [106367.390003] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [106367.473756] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [109452.995797] acer_wmi: Unknown function number - 8 - 1 [109721.444285] usb 1-1: new high-speed USB device number 4 using xhci_hcd [109722.336087] usb 2-1: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd [109722.356925] usb 2-1: New USB device found, idVendor=0951, idProduct=16ae, bcdDevice= 1.10 [109722.356926] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [109722.356927] usb 2-1: Product: DT microDuo 3C [109722.356928] usb 2-1: Manufacturer: Kingston [109722.356929] usb 2-1: SerialNumber: ... [109722.359021] usb-storage 2-1:1.0: USB Mass Storage device detected [109722.359152] scsi host3: usb-storage 2-1:1.0 [109723.366401] scsi 3:0:0:0: Direct-Access Kingston DT microDuo 3C PMAP PQ: 0 ANSI: 6 [109723.366666] scsi 3:0:0:0: Attached scsi generic sg2 type 0 [109723.367312] sd 3:0:0:0: [sdc] 121110528 512-byte logical blocks: (62.0 GB/57.8 GiB) [109723.367822] sd 3:0:0:0: [sdc] Write Protect is off [109723.367823] sd 3:0:0:0: [sdc] Mode Sense: 45 00 00 00 [109723.368404] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [109723.486931] sdc: sdc1 [109723.490045] sd 3:0:0:0: [sdc] Attached SCSI removable disk [109753.819891] sd 3:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [109753.819894] sd 3:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] [109753.819897] sd 3:0:0:0: [sdc] tag#0 Add. Sense: Medium not present [109753.819899] sd 3:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 08 78 00 00 08 00 [109753.819902] blk_update_request: I/O error, dev sdc, sector 2168 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [109753.821306] sd 3:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [109753.821309] sd 3:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] [109753.821311] sd 3:0:0:0: [sdc] tag#0 Add. Sense: Medium not present [109753.821313] sd 3:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 08 78 00 00 08 00 [109753.821315] blk_update_request: I/O error, dev sdc, sector 2168 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0 [109753.821318] Buffer I/O error on dev sdc1, logical block 120, async page read [109753.821319] Buffer I/O error on dev sdc1, logical block 121, async page read [109753.821320] Buffer I/O error on dev sdc1, logical block 122, async page read [109753.821321] Buffer I/O error on dev sdc1, logical block 123, async page read [109753.821322] Buffer I/O error on dev sdc1, logical block 124, async page read [109753.821323] Buffer I/O error on dev sdc1, logical block 125, async page read [109753.821324] Buffer I/O error on dev sdc1, logical block 126, async page read [109753.821325] Buffer I/O error on dev sdc1, logical block 127, async page read [109757.224480] usb 2-1: USB disconnect, device number 6 [110967.636837] PM: suspend entry (deep) [110967.643099] Filesystems sync: 0.006 seconds [110967.643379] Freezing user space processes ... (elapsed 0.002 seconds) done. [110967.645878] OOM killer disabled. [110967.645879] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [110967.647156] printk: Suspending console(s) (use no_console_suspend to debug) [110967.647987] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [110967.670924] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [110967.670964] sd 1:0:0:0: [sda] Synchronizing SCSI cache [110967.671379] sd 1:0:0:0: [sda] Stopping disk [110967.671864] sd 2:0:0:0: [sdb] Stopping disk [110968.446258] ACPI: EC: interrupt blocked [110968.487247] ACPI: Preparing to enter system sleep state S3 [110968.487597] ACPI: EC: event blocked [110968.487598] ACPI: EC: EC stopped [110968.487598] PM: Saving platform NVS memory [110968.487644] Disabling non-boot CPUs ... [110968.488885] smpboot: CPU 1 is now offline [110968.491198] smpboot: CPU 2 is now offline [110968.493224] smpboot: CPU 3 is now offline [110968.495509] smpboot: CPU 4 is now offline [110968.497629] smpboot: CPU 5 is now offline [110968.499648] smpboot: CPU 6 is now offline [110968.501735] smpboot: CPU 7 is now offline [110968.504461] ACPI: Low-level resume complete [110968.504545] ACPI: EC: EC started [110968.504545] PM: Restoring platform NVS memory [110968.506607] Enabling non-boot CPUs ... [110968.506650] x86: Booting SMP configuration: [110968.506650] smpboot: Booting Node 0 Processor 1 APIC 0x2 [110968.506951] microcode: sig=0x806ea, pf=0x80, revision=0x84 [110968.508577] CPU1 is up [110968.508605] smpboot: Booting Node 0 Processor 2 APIC 0x4 [110968.510527] CPU2 is up [110968.510555] smpboot: Booting Node 0 Processor 3 APIC 0x6 [110968.512497] CPU3 is up [110968.512523] smpboot: Booting Node 0 Processor 4 APIC 0x1 [110968.512890] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [110968.513236] CPU4 is up [110968.513267] smpboot: Booting Node 0 Processor 5 APIC 0x3 [110968.513845] CPU5 is up [110968.513870] smpboot: Booting Node 0 Processor 6 APIC 0x5 [110968.514460] CPU6 is up [110968.514487] smpboot: Booting Node 0 Processor 7 APIC 0x7 [110968.515089] CPU7 is up [110968.517839] ACPI: Waking up from system sleep state S3 [110968.521640] ACPI: EC: interrupt unblocked [110968.625586] ACPI: EC: event unblocked [110968.625967] sd 2:0:0:0: [sdb] Starting disk [110968.625968] sd 1:0:0:0: [sda] Starting disk [110968.835736] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [110968.861613] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [110968.942359] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [110968.942381] ata1: SATA link down (SStatus 4 SControl 300) [110969.045250] ata3.00: configured for UDMA/133 [110969.055339] ahci 0000:00:17.0: port does not support device sleep [110969.059586] ata3.00: Enabling discard_zeroes_data [110969.137834] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [110969.288680] OOM killer enabled. [110969.288681] Restarting tasks ... [110969.291157] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [110969.293559] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [110969.293563] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [110969.316468] done. [110969.347809] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [110969.375579] PM: suspend exit [110969.440986] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [110969.473656] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [110971.229277] ata2: SATA link down (SStatus 0 SControl 300) [110971.229282] ata2.00: link offline, clearing class 1 to NONE [110971.553260] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [110971.559520] ata2.00: failed to enable AA (error_mask=0x100) [110971.559522] ata2.00: revalidation failed (errno=-5) [110971.559524] ata2: limiting SATA link speed to 3.0 Gbps [110974.003864] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [110974.035553] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [110974.041449] wlp2s0: authenticated [110974.045198] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [110974.054448] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=9) [110974.057735] wlp2s0: associated [110974.067570] ath: EEPROM regdomain: 0x8283 [110974.067573] ath: EEPROM indicates we should expect a country code [110974.067575] ath: doing EEPROM country->regdmn map search [110974.067576] ath: country maps to regdmn code: 0x3d [110974.067578] ath: Country alpha2 being used: RU [110974.067579] ath: Regpair used: 0x3d [110974.067581] ath: regdomain 0x8283 dynamically updated by country element [110974.155507] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [110976.980780] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [110976.995843] ata2.00: configured for UDMA/133 [110977.184770] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [110977.231761] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [110977.337443] r8169 0000:01:00.1 enp1s0f1: Link is Down [110982.259148] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [110982.292416] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [110982.397263] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [110982.501245] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [110982.549424] wlp2s0: authenticated [110982.553182] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [110982.561838] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=5) [110982.564868] wlp2s0: associated [110982.575654] ath: EEPROM regdomain: 0x8283 [110982.575655] ath: EEPROM indicates we should expect a country code [110982.575657] ath: doing EEPROM country->regdmn map search [110982.575658] ath: country maps to regdmn code: 0x3d [110982.575659] ath: Country alpha2 being used: RU [110982.575660] ath: Regpair used: 0x3d [110982.575662] ath: regdomain 0x8283 dynamically updated by country element [110982.575696] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [110982.654407] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [119080.126576] PM: suspend entry (deep) [119080.133865] Filesystems sync: 0.007 seconds [119080.134380] Freezing user space processes ... (elapsed 0.003 seconds) done. [119080.137709] OOM killer disabled. [119080.137709] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [119080.139130] printk: Suspending console(s) (use no_console_suspend to debug) [119080.139680] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [119080.171453] sd 1:0:0:0: [sda] Synchronizing SCSI cache [119080.171872] sd 1:0:0:0: [sda] Stopping disk [119080.175566] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [119080.176444] sd 2:0:0:0: [sdb] Stopping disk [119080.942814] ACPI: EC: interrupt blocked [119080.983828] ACPI: Preparing to enter system sleep state S3 [119080.984476] ACPI: EC: event blocked [119080.984476] ACPI: EC: EC stopped [119080.984477] PM: Saving platform NVS memory [119080.984548] Disabling non-boot CPUs ... [119080.985994] smpboot: CPU 1 is now offline [119080.988902] smpboot: CPU 2 is now offline [119080.991748] smpboot: CPU 3 is now offline [119080.994979] smpboot: CPU 4 is now offline [119080.997725] smpboot: CPU 5 is now offline [119081.000560] smpboot: CPU 6 is now offline [119081.003380] smpboot: CPU 7 is now offline [119081.007172] ACPI: Low-level resume complete [119081.007281] ACPI: EC: EC started [119081.007281] PM: Restoring platform NVS memory [119081.010711] Enabling non-boot CPUs ... [119081.010778] x86: Booting SMP configuration: [119081.010779] smpboot: Booting Node 0 Processor 1 APIC 0x2 [119081.011308] microcode: sig=0x806ea, pf=0x80, revision=0x84 [119081.014203] CPU1 is up [119081.014249] smpboot: Booting Node 0 Processor 2 APIC 0x4 [119081.017672] CPU2 is up [119081.017713] smpboot: Booting Node 0 Processor 3 APIC 0x6 [119081.021154] CPU3 is up [119081.021197] smpboot: Booting Node 0 Processor 4 APIC 0x1 [119081.021853] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [119081.022410] CPU4 is up [119081.022459] smpboot: Booting Node 0 Processor 5 APIC 0x3 [119081.023429] CPU5 is up [119081.023469] smpboot: Booting Node 0 Processor 6 APIC 0x5 [119081.024458] CPU6 is up [119081.024500] smpboot: Booting Node 0 Processor 7 APIC 0x7 [119081.025517] CPU7 is up [119081.029914] ACPI: Waking up from system sleep state S3 [119081.036551] ACPI: EC: interrupt unblocked [119081.135148] ACPI: EC: event unblocked [119081.135599] sd 2:0:0:0: [sdb] Starting disk [119081.135626] sd 1:0:0:0: [sda] Starting disk [119081.344729] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [119081.370445] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [119081.449676] ata1: SATA link down (SStatus 4 SControl 300) [119081.449706] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [119081.554030] ata3.00: configured for UDMA/133 [119081.564167] ahci 0000:00:17.0: port does not support device sleep [119081.566395] ata3.00: Enabling discard_zeroes_data [119081.646522] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [119081.808808] OOM killer enabled. [119081.808809] Restarting tasks ... [119081.814234] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [119081.814703] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [119081.814707] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [119081.822155] done. [119081.868566] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [119081.868932] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [119081.884269] PM: suspend exit [119081.899530] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [119083.738217] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [119083.753337] ata2.00: configured for UDMA/133 [119083.945957] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [119084.054105] r8169 0000:01:00.1 enp1s0f1: Link is Down [119084.378236] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [119084.396558] ata2.00: configured for UDMA/133 [119088.916287] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [119088.950195] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [119088.957329] wlp2s0: authenticated [119088.958112] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [119088.968338] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=1) [119088.971221] wlp2s0: associated [119088.978058] ath: EEPROM regdomain: 0x8283 [119088.978059] ath: EEPROM indicates we should expect a country code [119088.978061] ath: doing EEPROM country->regdmn map search [119088.978062] ath: country maps to regdmn code: 0x3d [119088.978063] ath: Country alpha2 being used: RU [119088.978063] ath: Regpair used: 0x3d [119088.978065] ath: regdomain 0x8283 dynamically updated by country element [119088.995344] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [119089.013540] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [122780.331857] acer_wmi: Unknown function number - 8 - 1 [123955.541205] PM: suspend entry (deep) [123955.544170] Filesystems sync: 0.002 seconds [123955.544345] Freezing user space processes ... (elapsed 0.002 seconds) done. [123955.546368] OOM killer disabled. [123955.546369] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [123955.547756] printk: Suspending console(s) (use no_console_suspend to debug) [123955.548492] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [123955.572555] sd 1:0:0:0: [sda] Synchronizing SCSI cache [123955.573090] sd 1:0:0:0: [sda] Stopping disk [123955.576739] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [123955.577642] sd 2:0:0:0: [sdb] Stopping disk [123956.479904] ACPI: EC: interrupt blocked [123956.520897] ACPI: Preparing to enter system sleep state S3 [123956.521252] ACPI: EC: event blocked [123956.521253] ACPI: EC: EC stopped [123956.521253] PM: Saving platform NVS memory [123956.521298] Disabling non-boot CPUs ... [123956.522540] smpboot: CPU 1 is now offline [123956.524631] smpboot: CPU 2 is now offline [123956.526722] smpboot: CPU 3 is now offline [123956.529033] smpboot: CPU 4 is now offline [123956.531032] smpboot: CPU 5 is now offline [123956.533005] smpboot: CPU 6 is now offline [123956.535052] smpboot: CPU 7 is now offline [123956.537769] ACPI: Low-level resume complete [123956.537853] ACPI: EC: EC started [123956.537853] PM: Restoring platform NVS memory [123956.539912] Enabling non-boot CPUs ... [123956.539956] x86: Booting SMP configuration: [123956.539957] smpboot: Booting Node 0 Processor 1 APIC 0x2 [123956.540257] microcode: sig=0x806ea, pf=0x80, revision=0x84 [123956.541879] CPU1 is up [123956.541907] smpboot: Booting Node 0 Processor 2 APIC 0x4 [123956.543834] CPU2 is up [123956.543865] smpboot: Booting Node 0 Processor 3 APIC 0x6 [123956.545806] CPU3 is up [123956.545833] smpboot: Booting Node 0 Processor 4 APIC 0x1 [123956.546200] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [123956.546535] CPU4 is up [123956.546566] smpboot: Booting Node 0 Processor 5 APIC 0x3 [123956.547137] CPU5 is up [123956.547164] smpboot: Booting Node 0 Processor 6 APIC 0x5 [123956.547751] CPU6 is up [123956.547777] smpboot: Booting Node 0 Processor 7 APIC 0x7 [123956.548379] CPU7 is up [123956.551136] ACPI: Waking up from system sleep state S3 [123956.554946] ACPI: EC: interrupt unblocked [123956.655313] ACPI: EC: event unblocked [123956.655644] sd 2:0:0:0: [sdb] Starting disk [123956.655645] sd 1:0:0:0: [sda] Starting disk [123956.865352] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [123956.891115] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [123956.970820] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [123956.970841] ata1: SATA link down (SStatus 4 SControl 300) [123957.077236] ata3.00: configured for UDMA/133 [123957.087323] ahci 0000:00:17.0: port does not support device sleep [123957.090914] ata3.00: Enabling discard_zeroes_data [123957.167281] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [123957.329475] OOM killer enabled. [123957.329476] Restarting tasks ... [123957.337676] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [123957.338136] done. [123957.338219] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [123957.338222] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [123957.392370] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [123957.394109] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [123957.397667] PM: suspend exit [123957.425328] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [123959.014975] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [123959.030151] ata2.00: configured for UDMA/133 [123959.218974] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [123959.330958] r8169 0000:01:00.1 enp1s0f1: Link is Down [123959.642477] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [123959.661275] ata2.00: configured for UDMA/133 [123964.209558] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [123964.244943] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [123964.346983] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [123964.450947] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [123964.554947] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [123969.260867] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [123969.292412] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [123969.298429] wlp2s0: authenticated [123969.298850] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [123969.307798] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=5) [123969.310314] wlp2s0: associated [123969.321883] ath: EEPROM regdomain: 0x8283 [123969.321884] ath: EEPROM indicates we should expect a country code [123969.321885] ath: doing EEPROM country->regdmn map search [123969.321886] ath: country maps to regdmn code: 0x3d [123969.321887] ath: Country alpha2 being used: RU [123969.321888] ath: Regpair used: 0x3d [123969.321890] ath: regdomain 0x8283 dynamically updated by country element [123969.334954] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [123969.361781] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [124948.593726] PM: suspend entry (deep) [124948.604419] Filesystems sync: 0.010 seconds [124948.604871] Freezing user space processes ... (elapsed 0.002 seconds) done. [124948.607799] OOM killer disabled. [124948.607800] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [124948.609158] printk: Suspending console(s) (use no_console_suspend to debug) [124948.633743] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [124948.653195] sd 1:0:0:0: [sda] Synchronizing SCSI cache [124948.653709] sd 1:0:0:0: [sda] Stopping disk [124948.657253] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [124948.660714] sd 2:0:0:0: [sdb] Stopping disk [124949.580676] ACPI: EC: interrupt blocked [124949.621657] ACPI: Preparing to enter system sleep state S3 [124949.622301] ACPI: EC: event blocked [124949.622302] ACPI: EC: EC stopped [124949.622303] PM: Saving platform NVS memory [124949.622375] Disabling non-boot CPUs ... [124949.623816] smpboot: CPU 1 is now offline [124949.626473] smpboot: CPU 2 is now offline [124949.629137] smpboot: CPU 3 is now offline [124949.631774] smpboot: CPU 4 is now offline [124949.634804] smpboot: CPU 5 is now offline [124949.637252] smpboot: CPU 6 is now offline [124949.639888] smpboot: CPU 7 is now offline [124949.643492] ACPI: Low-level resume complete [124949.643600] ACPI: EC: EC started [124949.643601] PM: Restoring platform NVS memory [124949.646834] Enabling non-boot CPUs ... [124949.646901] x86: Booting SMP configuration: [124949.646902] smpboot: Booting Node 0 Processor 1 APIC 0x2 [124949.647430] microcode: sig=0x806ea, pf=0x80, revision=0x84 [124949.650306] CPU1 is up [124949.650352] smpboot: Booting Node 0 Processor 2 APIC 0x4 [124949.653761] CPU2 is up [124949.653802] smpboot: Booting Node 0 Processor 3 APIC 0x6 [124949.657245] CPU3 is up [124949.657288] smpboot: Booting Node 0 Processor 4 APIC 0x1 [124949.657913] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [124949.658464] CPU4 is up [124949.658514] smpboot: Booting Node 0 Processor 5 APIC 0x3 [124949.659487] CPU5 is up [124949.659531] smpboot: Booting Node 0 Processor 6 APIC 0x5 [124949.660553] CPU6 is up [124949.660597] smpboot: Booting Node 0 Processor 7 APIC 0x7 [124949.661630] CPU7 is up [124949.666037] ACPI: Waking up from system sleep state S3 [124949.672662] ACPI: EC: interrupt unblocked [124949.772975] ACPI: EC: event unblocked [124949.773735] sd 1:0:0:0: [sda] Starting disk [124949.773758] sd 2:0:0:0: [sdb] Starting disk [124949.982619] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [124950.019083] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [124950.088052] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [124950.088073] ata1: SATA link down (SStatus 4 SControl 300) [124950.188491] ata3.00: configured for UDMA/133 [124950.198598] ahci 0000:00:17.0: port does not support device sleep [124950.202047] ata3.00: Enabling discard_zeroes_data [124950.292390] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [124950.443001] OOM killer enabled. [124950.443002] Restarting tasks ... [124950.448043] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [124950.448509] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [124950.448515] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [124950.451992] done. [124950.502636] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [124950.518700] PM: suspend exit [124950.519217] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [124950.550161] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [124952.500102] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [124952.515268] ata2.00: configured for UDMA/133 [124952.721872] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [124952.827963] r8169 0000:01:00.1 enp1s0f1: Link is Down [124957.683759] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [124957.717589] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [124957.723649] wlp2s0: authenticated [124957.724017] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [124957.732834] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=2) [124957.735564] wlp2s0: associated [124957.743115] ath: EEPROM regdomain: 0x8283 [124957.743117] ath: EEPROM indicates we should expect a country code [124957.743118] ath: doing EEPROM country->regdmn map search [124957.743119] ath: country maps to regdmn code: 0x3d [124957.743120] ath: Country alpha2 being used: RU [124957.743121] ath: Regpair used: 0x3d [124957.743123] ath: regdomain 0x8283 dynamically updated by country element [124957.753121] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [124957.795396] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [125515.123567] PM: suspend entry (deep) [125515.132615] Filesystems sync: 0.009 seconds [125515.133006] Freezing user space processes ... (elapsed 0.003 seconds) done. [125515.136295] OOM killer disabled. [125515.136296] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [125515.137433] printk: Suspending console(s) (use no_console_suspend to debug) [125515.138185] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [125515.157315] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [125515.158154] sd 2:0:0:0: [sdb] Stopping disk [125515.161319] sd 1:0:0:0: [sda] Synchronizing SCSI cache [125515.161741] sd 1:0:0:0: [sda] Stopping disk [125515.920359] ACPI: EC: interrupt blocked [125515.961331] ACPI: Preparing to enter system sleep state S3 [125515.961972] ACPI: EC: event blocked [125515.961972] ACPI: EC: EC stopped [125515.961973] PM: Saving platform NVS memory [125515.962044] Disabling non-boot CPUs ... [125515.963511] smpboot: CPU 1 is now offline [125515.966197] smpboot: CPU 2 is now offline [125515.968893] smpboot: CPU 3 is now offline [125515.971409] smpboot: CPU 4 is now offline [125515.974331] smpboot: CPU 5 is now offline [125515.976764] smpboot: CPU 6 is now offline [125515.979341] smpboot: CPU 7 is now offline [125515.982865] ACPI: Low-level resume complete [125515.982973] ACPI: EC: EC started [125515.982973] PM: Restoring platform NVS memory [125515.986224] Enabling non-boot CPUs ... [125515.986290] x86: Booting SMP configuration: [125515.986292] smpboot: Booting Node 0 Processor 1 APIC 0x2 [125515.986820] microcode: sig=0x806ea, pf=0x80, revision=0x84 [125515.989691] CPU1 is up [125515.989741] smpboot: Booting Node 0 Processor 2 APIC 0x4 [125515.993160] CPU2 is up [125515.993200] smpboot: Booting Node 0 Processor 3 APIC 0x6 [125515.996632] CPU3 is up [125515.996674] smpboot: Booting Node 0 Processor 4 APIC 0x1 [125515.997301] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [125515.997849] CPU4 is up [125515.997898] smpboot: Booting Node 0 Processor 5 APIC 0x3 [125515.998886] CPU5 is up [125515.998926] smpboot: Booting Node 0 Processor 6 APIC 0x5 [125515.999929] CPU6 is up [125515.999972] smpboot: Booting Node 0 Processor 7 APIC 0x7 [125516.000987] CPU7 is up [125516.005387] ACPI: Waking up from system sleep state S3 [125516.012083] ACPI: EC: interrupt unblocked [125516.112578] ACPI: EC: event unblocked [125516.113199] sd 2:0:0:0: [sdb] Starting disk [125516.113201] sd 1:0:0:0: [sda] Starting disk [125516.322061] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [125516.347782] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [125516.428041] ata1: SATA link down (SStatus 4 SControl 300) [125516.428068] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [125516.530647] ata3.00: configured for UDMA/133 [125516.540751] ahci 0000:00:17.0: port does not support device sleep [125516.542644] ata3.00: Enabling discard_zeroes_data [125516.623707] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [125516.786063] OOM killer enabled. [125516.786065] Restarting tasks ... [125516.790680] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [125516.791346] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [125516.791349] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [125516.798484] done. [125516.845688] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [125516.849021] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [125516.862202] PM: suspend exit [125516.883386] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [125518.850321] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [125518.865523] ata2.00: configured for UDMA/133 [125519.080828] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [125519.186037] r8169 0000:01:00.1 enp1s0f1: Link is Down [125524.116161] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [125524.149969] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [125524.251536] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [125524.355443] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [125524.459356] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [125529.185302] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [125529.216417] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [125529.320943] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [125529.424937] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [125529.528872] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [125534.635170] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [125534.666560] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [125534.669509] wlp2s0: authenticated [125534.674183] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [125534.685489] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=3) [125534.687771] wlp2s0: associated [125534.698360] ath: EEPROM regdomain: 0x8283 [125534.698362] ath: EEPROM indicates we should expect a country code [125534.698363] ath: doing EEPROM country->regdmn map search [125534.698364] ath: country maps to regdmn code: 0x3d [125534.698365] ath: Country alpha2 being used: RU [125534.698366] ath: Regpair used: 0x3d [125534.698367] ath: regdomain 0x8283 dynamically updated by country element [125534.701185] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [125534.704664] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [131529.723821] acer_wmi: Unknown function number - 8 - 1 [135548.767327] acer_wmi: Unknown function number - 8 - 0 [142609.007715] PM: suspend entry (deep) [142609.020099] Filesystems sync: 0.012 seconds [142609.020531] Freezing user space processes ... (elapsed 0.002 seconds) done. [142609.023231] OOM killer disabled. [142609.023232] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [142609.024601] printk: Suspending console(s) (use no_console_suspend to debug) [142609.025128] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [142609.047665] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [142609.048466] sd 2:0:0:0: [sdb] Stopping disk [142609.056021] sd 1:0:0:0: [sda] Synchronizing SCSI cache [142609.056435] sd 1:0:0:0: [sda] Stopping disk [142609.971100] ACPI: EC: interrupt blocked [142610.012113] ACPI: Preparing to enter system sleep state S3 [142610.012761] ACPI: EC: event blocked [142610.012761] ACPI: EC: EC stopped [142610.012762] PM: Saving platform NVS memory [142610.012836] Disabling non-boot CPUs ... [142610.014724] smpboot: CPU 1 is now offline [142610.017651] smpboot: CPU 2 is now offline [142610.020544] smpboot: CPU 3 is now offline [142610.023982] smpboot: CPU 4 is now offline [142610.026837] smpboot: CPU 5 is now offline [142610.029730] smpboot: CPU 6 is now offline [142610.032576] smpboot: CPU 7 is now offline [142610.036580] ACPI: Low-level resume complete [142610.036687] ACPI: EC: EC started [142610.036688] PM: Restoring platform NVS memory [142610.039947] Enabling non-boot CPUs ... [142610.040014] x86: Booting SMP configuration: [142610.040015] smpboot: Booting Node 0 Processor 1 APIC 0x2 [142610.040543] microcode: sig=0x806ea, pf=0x80, revision=0x84 [142610.043414] CPU1 is up [142610.043459] smpboot: Booting Node 0 Processor 2 APIC 0x4 [142610.046881] CPU2 is up [142610.046920] smpboot: Booting Node 0 Processor 3 APIC 0x6 [142610.050367] CPU3 is up [142610.050411] smpboot: Booting Node 0 Processor 4 APIC 0x1 [142610.051044] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [142610.051599] CPU4 is up [142610.051647] smpboot: Booting Node 0 Processor 5 APIC 0x3 [142610.052625] CPU5 is up [142610.052671] smpboot: Booting Node 0 Processor 6 APIC 0x5 [142610.053664] CPU6 is up [142610.053707] smpboot: Booting Node 0 Processor 7 APIC 0x7 [142610.054739] CPU7 is up [142610.059125] ACPI: Waking up from system sleep state S3 [142610.065745] ACPI: EC: interrupt unblocked [142610.162963] ACPI: EC: event unblocked [142610.163594] sd 1:0:0:0: [sda] Starting disk [142610.163596] sd 2:0:0:0: [sdb] Starting disk [142610.372899] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [142610.398730] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [142610.476241] ata1: SATA link down (SStatus 4 SControl 300) [142610.476443] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [142610.580777] ata3.00: configured for UDMA/133 [142610.590876] ahci 0000:00:17.0: port does not support device sleep [142610.592830] ata3.00: Enabling discard_zeroes_data [142610.674770] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [142610.837031] OOM killer enabled. [142610.837032] Restarting tasks ... [142610.842573] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [142610.843458] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [142610.843461] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [142610.844181] done. [142610.897439] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [142610.904929] PM: suspend exit [142610.919663] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [142610.951117] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [142612.518497] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [142612.533493] ata2.00: configured for UDMA/133 [142612.736964] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [142612.842552] r8169 0000:01:00.1 enp1s0f1: Link is Down [142617.722637] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [142617.756424] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [142617.858393] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [142617.962456] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [142618.066456] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [142622.776168] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [142622.807287] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [142622.910400] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [142623.014435] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [142623.118414] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [142628.231950] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [142628.263050] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [142628.366367] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [142628.470378] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [142628.507163] wlp2s0: authenticated [142628.510385] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [142628.519681] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=1) [142628.522173] wlp2s0: associated [142628.529924] ath: EEPROM regdomain: 0x8283 [142628.529926] ath: EEPROM indicates we should expect a country code [142628.529927] ath: doing EEPROM country->regdmn map search [142628.529928] ath: country maps to regdmn code: 0x3d [142628.529929] ath: Country alpha2 being used: RU [142628.529930] ath: Regpair used: 0x3d [142628.529931] ath: regdomain 0x8283 dynamically updated by country element [142628.539883] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [142628.576226] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [148281.001643] acer_wmi: Unknown function number - 8 - 1 [150607.036858] acer_wmi: Unknown function number - 8 - 0 [150640.699237] acer_wmi: Unknown function number - 8 - 1 [153470.042922] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 134) [153470.042923] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 134) [153470.042924] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 261) [153470.042925] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 261) [153470.042926] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 261) [153470.042927] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 261) [153470.042928] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 261) [153470.042929] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 261) [153470.042959] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 261) [153470.042960] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 261) [153470.049908] mce: CPU0: Package temperature/speed normal [153470.049909] mce: CPU7: Core temperature/speed normal [153470.049909] mce: CPU4: Package temperature/speed normal [153470.049910] mce: CPU5: Package temperature/speed normal [153470.049911] mce: CPU3: Core temperature/speed normal [153470.049912] mce: CPU2: Package temperature/speed normal [153470.049912] mce: CPU6: Package temperature/speed normal [153470.049913] mce: CPU1: Package temperature/speed normal [153470.049914] mce: CPU7: Package temperature/speed normal [153470.049915] mce: CPU3: Package temperature/speed normal [155552.315321] acer_wmi: Unknown function number - 8 - 0 [157266.797645] acer_wmi: Unknown function number - 8 - 1 [158437.032426] PM: suspend entry (deep) [158437.402636] Filesystems sync: 0.370 seconds [158437.402963] Freezing user space processes ... (elapsed 0.002 seconds) done. [158437.405035] OOM killer disabled. [158437.405035] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [158437.406279] printk: Suspending console(s) (use no_console_suspend to debug) [158437.406475] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [158437.415636] queueing ieee80211 work while going to suspend [158437.415636] queueing ieee80211 work while going to suspend [158437.433390] sd 1:0:0:0: [sda] Synchronizing SCSI cache [158437.437220] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [158437.438225] sd 2:0:0:0: [sdb] Stopping disk [158437.476215] sd 1:0:0:0: [sda] Stopping disk [158438.532463] ACPI: EC: interrupt blocked [158438.573464] ACPI: Preparing to enter system sleep state S3 [158438.573816] ACPI: EC: event blocked [158438.573816] ACPI: EC: EC stopped [158438.573817] PM: Saving platform NVS memory [158438.573862] Disabling non-boot CPUs ... [158438.575113] smpboot: CPU 1 is now offline [158438.577426] smpboot: CPU 2 is now offline [158438.579529] smpboot: CPU 3 is now offline [158438.581777] smpboot: CPU 4 is now offline [158438.583869] smpboot: CPU 5 is now offline [158438.585928] smpboot: CPU 6 is now offline [158438.588082] smpboot: CPU 7 is now offline [158438.590859] ACPI: Low-level resume complete [158438.590943] ACPI: EC: EC started [158438.590944] PM: Restoring platform NVS memory [158438.592990] Enabling non-boot CPUs ... [158438.593034] x86: Booting SMP configuration: [158438.593035] smpboot: Booting Node 0 Processor 1 APIC 0x2 [158438.593334] microcode: sig=0x806ea, pf=0x80, revision=0x84 [158438.594956] CPU1 is up [158438.594984] smpboot: Booting Node 0 Processor 2 APIC 0x4 [158438.596923] CPU2 is up [158438.596950] smpboot: Booting Node 0 Processor 3 APIC 0x6 [158438.598895] CPU3 is up [158438.598921] smpboot: Booting Node 0 Processor 4 APIC 0x1 [158438.599278] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [158438.599641] CPU4 is up [158438.599671] smpboot: Booting Node 0 Processor 5 APIC 0x3 [158438.600253] CPU5 is up [158438.600280] smpboot: Booting Node 0 Processor 6 APIC 0x5 [158438.600877] CPU6 is up [158438.600904] smpboot: Booting Node 0 Processor 7 APIC 0x7 [158438.601507] CPU7 is up [158438.604269] ACPI: Waking up from system sleep state S3 [158438.608084] ACPI: EC: interrupt unblocked [158438.707880] ACPI: EC: event unblocked [158438.708185] sd 1:0:0:0: [sda] Starting disk [158438.708186] sd 2:0:0:0: [sdb] Starting disk [158438.917520] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [158438.944341] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [158439.021355] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [158439.021372] ata1: SATA link down (SStatus 4 SControl 300) [158439.122111] ata3.00: configured for UDMA/133 [158439.132207] ahci 0000:00:17.0: port does not support device sleep [158439.163786] ata3.00: Enabling discard_zeroes_data [158439.220188] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [158439.383745] OOM killer enabled. [158439.383745] Restarting tasks ... [158439.389328] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [158439.389765] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [158439.389767] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [158439.401639] done. [158439.443729] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [158439.464255] PM: suspend exit [158439.539701] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [158439.572579] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [158441.071496] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [158441.086408] ata2.00: configured for UDMA/133 [158441.290655] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [158441.395440] r8169 0000:01:00.1 enp1s0f1: Link is Down [158442.122120] acer_wmi: Unknown function number - 8 - 0 [158446.320491] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [158446.354397] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [158446.459456] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [158446.563447] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [158446.667449] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [158451.372821] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [158451.403610] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [158451.507417] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [158451.611479] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [158451.715490] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [158456.821994] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [158456.853400] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [158456.959459] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [158457.063463] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [158457.167448] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [158462.777472] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [158462.808614] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [158462.817291] wlp2s0: authenticated [158462.819410] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [158462.835479] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=3) [158462.838291] wlp2s0: associated [158462.850150] ath: EEPROM regdomain: 0x8283 [158462.850151] ath: EEPROM indicates we should expect a country code [158462.850152] ath: doing EEPROM country->regdmn map search [158462.850153] ath: country maps to regdmn code: 0x3d [158462.850154] ath: Country alpha2 being used: RU [158462.850155] ath: Regpair used: 0x3d [158462.850156] ath: regdomain 0x8283 dynamically updated by country element [158462.854767] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [158462.877286] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [160154.937502] acer_wmi: Unknown function number - 8 - 1 [164421.428915] PM: suspend entry (deep) [164421.431842] Filesystems sync: 0.002 seconds [164421.432085] Freezing user space processes ... (elapsed 0.001 seconds) done. [164421.433937] OOM killer disabled. [164421.433938] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [164421.435097] printk: Suspending console(s) (use no_console_suspend to debug) [164421.435855] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [164421.463437] sd 1:0:0:0: [sda] Synchronizing SCSI cache [164421.463479] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [164421.463522] sd 2:0:0:0: [sdb] Stopping disk [164421.463731] sd 1:0:0:0: [sda] Stopping disk [164422.374213] ACPI: EC: interrupt blocked [164422.415207] ACPI: Preparing to enter system sleep state S3 [164422.415560] ACPI: EC: event blocked [164422.415560] ACPI: EC: EC stopped [164422.415561] PM: Saving platform NVS memory [164422.415605] Disabling non-boot CPUs ... [164422.416857] smpboot: CPU 1 is now offline [164422.418983] smpboot: CPU 2 is now offline [164422.421054] smpboot: CPU 3 is now offline [164422.423380] smpboot: CPU 4 is now offline [164422.425471] smpboot: CPU 5 is now offline [164422.427500] smpboot: CPU 6 is now offline [164422.429629] smpboot: CPU 7 is now offline [164422.432381] ACPI: Low-level resume complete [164422.432464] ACPI: EC: EC started [164422.432464] PM: Restoring platform NVS memory [164422.434646] Enabling non-boot CPUs ... [164422.434688] x86: Booting SMP configuration: [164422.434688] smpboot: Booting Node 0 Processor 1 APIC 0x2 [164422.434989] microcode: sig=0x806ea, pf=0x80, revision=0x84 [164422.436613] CPU1 is up [164422.436641] smpboot: Booting Node 0 Processor 2 APIC 0x4 [164422.438565] CPU2 is up [164422.438592] smpboot: Booting Node 0 Processor 3 APIC 0x6 [164422.440539] CPU3 is up [164422.440564] smpboot: Booting Node 0 Processor 4 APIC 0x1 [164422.440915] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [164422.441263] CPU4 is up [164422.441294] smpboot: Booting Node 0 Processor 5 APIC 0x3 [164422.441875] CPU5 is up [164422.441902] smpboot: Booting Node 0 Processor 6 APIC 0x5 [164422.442492] CPU6 is up [164422.442518] smpboot: Booting Node 0 Processor 7 APIC 0x7 [164422.443120] CPU7 is up [164422.445871] ACPI: Waking up from system sleep state S3 [164422.449690] ACPI: EC: interrupt unblocked [164422.550050] ACPI: EC: event unblocked [164422.550688] sd 1:0:0:0: [sda] Starting disk [164422.550689] sd 2:0:0:0: [sdb] Starting disk [164422.759550] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [164422.785510] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [164422.864655] ata1: SATA link down (SStatus 4 SControl 300) [164422.864686] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [164422.965324] ata3.00: configured for UDMA/133 [164422.975389] ahci 0000:00:17.0: port does not support device sleep [164422.979309] ata3.00: Enabling discard_zeroes_data [164423.061605] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [164423.212097] OOM killer enabled. [164423.212098] Restarting tasks ... done. [164423.236131] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [164423.236688] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [164423.236691] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [164423.279814] PM: suspend exit [164423.290960] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [164423.364109] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [164423.396482] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [164424.929292] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [164424.944369] ata2.00: configured for UDMA/133 [164425.145610] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [164425.261246] r8169 0000:01:00.1 enp1s0f1: Link is Down [164430.136305] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [164430.170223] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [164430.273208] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [164430.377180] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [164430.481242] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [164435.203210] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [164435.234527] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [164435.337133] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [164435.441125] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [164435.545237] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [164440.651949] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [164440.683113] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [164440.785112] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [164440.889213] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [164440.993148] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [164446.611783] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [164446.642989] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [164446.749077] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [164446.857156] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [164446.961215] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [164456.645464] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [164456.676602] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [164456.685814] wlp2s0: authenticated [164456.689091] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [164456.697727] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=4) [164456.700097] wlp2s0: associated [164456.708562] ath: EEPROM regdomain: 0x8283 [164456.708564] ath: EEPROM indicates we should expect a country code [164456.708565] ath: doing EEPROM country->regdmn map search [164456.708566] ath: country maps to regdmn code: 0x3d [164456.708567] ath: Country alpha2 being used: RU [164456.708568] ath: Regpair used: 0x3d [164456.708569] ath: regdomain 0x8283 dynamically updated by country element [164456.715221] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [164456.787934] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [172397.861927] PM: suspend entry (deep) [172399.590675] Filesystems sync: 1.728 seconds [172399.590967] Freezing user space processes ... (elapsed 0.002 seconds) done. [172399.593795] OOM killer disabled. [172399.593796] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [172399.595256] printk: Suspending console(s) (use no_console_suspend to debug) [172399.596200] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [172399.611119] sd 1:0:0:0: [sda] Synchronizing SCSI cache [172399.619192] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [172399.620552] sd 1:0:0:0: [sda] Stopping disk [172399.622817] sd 2:0:0:0: [sdb] Stopping disk [172400.594538] ACPI: EC: interrupt blocked [172400.635576] ACPI: Preparing to enter system sleep state S3 [172400.636208] ACPI: EC: event blocked [172400.636209] ACPI: EC: EC stopped [172400.636209] PM: Saving platform NVS memory [172400.636283] Disabling non-boot CPUs ... [172400.637739] smpboot: CPU 1 is now offline [172400.640519] smpboot: CPU 2 is now offline [172400.643761] smpboot: CPU 3 is now offline [172400.646865] smpboot: CPU 4 is now offline [172400.649566] smpboot: CPU 5 is now offline [172400.652247] smpboot: CPU 6 is now offline [172400.654966] smpboot: CPU 7 is now offline [172400.658657] ACPI: Low-level resume complete [172400.658766] ACPI: EC: EC started [172400.658766] PM: Restoring platform NVS memory [172400.662014] Enabling non-boot CPUs ... [172400.662080] x86: Booting SMP configuration: [172400.662081] smpboot: Booting Node 0 Processor 1 APIC 0x2 [172400.662610] microcode: sig=0x806ea, pf=0x80, revision=0x84 [172400.665492] CPU1 is up [172400.665538] smpboot: Booting Node 0 Processor 2 APIC 0x4 [172400.669133] CPU2 is up [172400.669178] smpboot: Booting Node 0 Processor 3 APIC 0x6 [172400.672625] CPU3 is up [172400.672669] smpboot: Booting Node 0 Processor 4 APIC 0x1 [172400.673325] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [172400.673872] CPU4 is up [172400.673933] smpboot: Booting Node 0 Processor 5 APIC 0x3 [172400.674911] CPU5 is up [172400.674955] smpboot: Booting Node 0 Processor 6 APIC 0x5 [172400.675950] CPU6 is up [172400.675990] smpboot: Booting Node 0 Processor 7 APIC 0x7 [172400.677005] CPU7 is up [172400.681415] ACPI: Waking up from system sleep state S3 [172400.688071] ACPI: EC: interrupt unblocked [172400.786915] ACPI: EC: event unblocked [172400.787480] sd 1:0:0:0: [sda] Starting disk [172400.787481] sd 2:0:0:0: [sdb] Starting disk [172401.000804] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [172401.022304] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [172401.101571] ata1: SATA link down (SStatus 4 SControl 300) [172401.101597] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [172401.207910] ata3.00: configured for UDMA/133 [172401.217947] ahci 0000:00:17.0: port does not support device sleep [172401.219933] ata3.00: Enabling discard_zeroes_data [172401.298324] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [172401.460518] OOM killer enabled. [172401.460519] Restarting tasks ... [172401.466714] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [172401.467341] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [172401.467344] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [172401.470256] done. [172401.521628] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [172401.524751] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [172401.532528] PM: suspend exit [172401.555759] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [172403.145957] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [172403.161189] ata2.00: configured for UDMA/133 [172403.400864] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [172403.505964] r8169 0000:01:00.1 enp1s0f1: Link is Down [172408.413331] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [172408.447579] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [172408.457060] wlp2s0: authenticated [172408.457874] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [172408.467509] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=9) [172408.470482] wlp2s0: associated [172408.479680] ath: EEPROM regdomain: 0x8283 [172408.479681] ath: EEPROM indicates we should expect a country code [172408.479682] ath: doing EEPROM country->regdmn map search [172408.479683] ath: country maps to regdmn code: 0x3d [172408.479684] ath: Country alpha2 being used: RU [172408.479685] ath: Regpair used: 0x3d [172408.479686] ath: regdomain 0x8283 dynamically updated by country element [172408.481804] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [172408.488844] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [175951.254458] acer_wmi: Unknown function number - 8 - 1 [179159.158561] acer_wmi: Unknown function number - 8 - 0 [180402.765772] acer_wmi: Unknown function number - 8 - 1 [183055.552805] acer_wmi: Unknown function number - 8 - 0 [188880.081944] PM: suspend entry (deep) [188880.084832] Filesystems sync: 0.002 seconds [188880.085337] Freezing user space processes ... (elapsed 0.002 seconds) done. [188880.087613] OOM killer disabled. [188880.087614] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [188880.088970] printk: Suspending console(s) (use no_console_suspend to debug) [188880.089266] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [188880.111572] sd 1:0:0:0: [sda] Synchronizing SCSI cache [188880.111668] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [188880.111772] sd 2:0:0:0: [sdb] Stopping disk [188880.111932] sd 1:0:0:0: [sda] Stopping disk [188881.015373] ACPI: EC: interrupt blocked [188881.055944] ACPI: Preparing to enter system sleep state S3 [188881.056581] ACPI: EC: event blocked [188881.056581] ACPI: EC: EC stopped [188881.056582] PM: Saving platform NVS memory [188881.056655] Disabling non-boot CPUs ... [188881.058566] smpboot: CPU 1 is now offline [188881.061504] smpboot: CPU 2 is now offline [188881.064370] smpboot: CPU 3 is now offline [188881.067848] smpboot: CPU 4 is now offline [188881.070710] smpboot: CPU 5 is now offline [188881.073663] smpboot: CPU 6 is now offline [188881.076717] smpboot: CPU 7 is now offline [188881.080576] ACPI: Low-level resume complete [188881.080684] ACPI: EC: EC started [188881.080684] PM: Restoring platform NVS memory [188881.084131] Enabling non-boot CPUs ... [188881.084197] x86: Booting SMP configuration: [188881.084198] smpboot: Booting Node 0 Processor 1 APIC 0x2 [188881.084728] microcode: sig=0x806ea, pf=0x80, revision=0x84 [188881.087608] CPU1 is up [188881.087653] smpboot: Booting Node 0 Processor 2 APIC 0x4 [188881.091068] CPU2 is up [188881.091110] smpboot: Booting Node 0 Processor 3 APIC 0x6 [188881.094564] CPU3 is up [188881.094607] smpboot: Booting Node 0 Processor 4 APIC 0x1 [188881.095262] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [188881.095808] CPU4 is up [188881.095859] smpboot: Booting Node 0 Processor 5 APIC 0x3 [188881.096829] CPU5 is up [188881.096871] smpboot: Booting Node 0 Processor 6 APIC 0x5 [188881.097863] CPU6 is up [188881.097905] smpboot: Booting Node 0 Processor 7 APIC 0x7 [188881.098922] CPU7 is up [188881.103331] ACPI: Waking up from system sleep state S3 [188881.109943] ACPI: EC: interrupt unblocked [188881.207270] ACPI: EC: event unblocked [188881.207776] sd 1:0:0:0: [sda] Starting disk [188881.207778] sd 2:0:0:0: [sdb] Starting disk [188881.420812] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [188881.446523] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [188881.522158] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [188881.522180] ata1: SATA link down (SStatus 4 SControl 300) [188881.626098] ata3.00: configured for UDMA/133 [188881.636253] ahci 0000:00:17.0: port does not support device sleep [188881.638277] ata3.00: Enabling discard_zeroes_data [188881.722694] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [188881.872937] OOM killer enabled. [188881.872938] Restarting tasks ... [188881.878443] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [188881.878890] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [188881.878893] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [188881.880565] done. [188881.931276] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [188881.933141] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [188881.945468] PM: suspend exit [188881.963173] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [188883.558369] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [188883.573583] ata2.00: configured for UDMA/133 [188883.772016] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [188883.878449] r8169 0000:01:00.1 enp1s0f1: Link is Down [188888.785494] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [188888.819284] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [188888.922264] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [188889.026320] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [188889.130327] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [188893.835875] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [188893.866608] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [188893.872259] wlp2s0: authenticated [188893.876081] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [188893.884734] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=2) [188893.887254] wlp2s0: associated [188893.895466] ath: EEPROM regdomain: 0x8283 [188893.895468] ath: EEPROM indicates we should expect a country code [188893.895469] ath: doing EEPROM country->regdmn map search [188893.895470] ath: country maps to regdmn code: 0x3d [188893.895471] ath: Country alpha2 being used: RU [188893.895471] ath: Regpair used: 0x3d [188893.895473] ath: regdomain 0x8283 dynamically updated by country element [188893.895509] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [188893.978566] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [192803.194571] acer_wmi: Unknown function number - 8 - 1 [193969.193850] PM: suspend entry (deep) [193969.196928] Filesystems sync: 0.003 seconds [193969.197171] Freezing user space processes ... (elapsed 0.002 seconds) done. [193969.199579] OOM killer disabled. [193969.199579] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [193969.201003] printk: Suspending console(s) (use no_console_suspend to debug) [193969.201675] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [193969.222249] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [193969.223184] sd 2:0:0:0: [sdb] Stopping disk [193969.234233] sd 1:0:0:0: [sda] Synchronizing SCSI cache [193969.234642] sd 1:0:0:0: [sda] Stopping disk [193970.157361] ACPI: EC: interrupt blocked [193970.198258] ACPI: Preparing to enter system sleep state S3 [193970.198614] ACPI: EC: event blocked [193970.198614] ACPI: EC: EC stopped [193970.198615] PM: Saving platform NVS memory [193970.198660] Disabling non-boot CPUs ... [193970.199903] smpboot: CPU 1 is now offline [193970.202036] smpboot: CPU 2 is now offline [193970.204047] smpboot: CPU 3 is now offline [193970.206308] smpboot: CPU 4 is now offline [193970.208306] smpboot: CPU 5 is now offline [193970.210322] smpboot: CPU 6 is now offline [193970.212405] smpboot: CPU 7 is now offline [193970.215089] ACPI: Low-level resume complete [193970.215171] ACPI: EC: EC started [193970.215172] PM: Restoring platform NVS memory [193970.217229] Enabling non-boot CPUs ... [193970.217271] x86: Booting SMP configuration: [193970.217272] smpboot: Booting Node 0 Processor 1 APIC 0x2 [193970.217573] microcode: sig=0x806ea, pf=0x80, revision=0x84 [193970.219191] CPU1 is up [193970.219220] smpboot: Booting Node 0 Processor 2 APIC 0x4 [193970.221139] CPU2 is up [193970.221166] smpboot: Booting Node 0 Processor 3 APIC 0x6 [193970.223107] CPU3 is up [193970.223133] smpboot: Booting Node 0 Processor 4 APIC 0x1 [193970.223483] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [193970.223819] CPU4 is up [193970.223850] smpboot: Booting Node 0 Processor 5 APIC 0x3 [193970.224434] CPU5 is up [193970.224462] smpboot: Booting Node 0 Processor 6 APIC 0x5 [193970.225048] CPU6 is up [193970.225074] smpboot: Booting Node 0 Processor 7 APIC 0x7 [193970.225684] CPU7 is up [193970.228437] ACPI: Waking up from system sleep state S3 [193970.232217] ACPI: EC: interrupt unblocked [193970.333183] ACPI: EC: event unblocked [193970.333690] sd 2:0:0:0: [sdb] Starting disk [193970.333694] sd 1:0:0:0: [sda] Starting disk [193970.542678] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [193970.568653] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [193970.647836] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [193970.648310] ata1: SATA link down (SStatus 4 SControl 300) [193970.739465] ata3.00: configured for UDMA/133 [193970.749602] ahci 0000:00:17.0: port does not support device sleep [193970.774250] ata3.00: Enabling discard_zeroes_data [193970.844696] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [193970.995007] OOM killer enabled. [193970.995008] Restarting tasks ... [193970.999815] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [193971.000413] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [193971.000416] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [193971.003015] done. [193971.054867] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [193971.062799] PM: suspend exit [193971.134125] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [193971.165647] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [193972.688397] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [193972.703598] ata2.00: configured for UDMA/133 [193972.901178] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [193973.008421] r8169 0000:01:00.1 enp1s0f1: Link is Down [193977.934341] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [193977.968053] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [193977.974298] wlp2s0: authenticated [193977.976365] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [193977.986595] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=8) [193977.989068] wlp2s0: associated [193977.995935] ath: EEPROM regdomain: 0x8283 [193977.995936] ath: EEPROM indicates we should expect a country code [193977.995937] ath: doing EEPROM country->regdmn map search [193977.995938] ath: country maps to regdmn code: 0x3d [193977.995939] ath: Country alpha2 being used: RU [193977.995940] ath: Regpair used: 0x3d [193977.995941] ath: regdomain 0x8283 dynamically updated by country element [193978.009943] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [193978.113583] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [200052.172998] acer_wmi: Unknown function number - 8 - 1 [201640.448426] acer_wmi: Unknown function number - 8 - 0 [207167.374283] PM: suspend entry (deep) [207167.377302] Filesystems sync: 0.003 seconds [207167.377693] Freezing user space processes ... (elapsed 0.002 seconds) done. [207167.380662] OOM killer disabled. [207167.380663] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [207167.382073] printk: Suspending console(s) (use no_console_suspend to debug) [207167.382683] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [207167.422626] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [207167.422674] sd 1:0:0:0: [sda] Synchronizing SCSI cache [207167.423086] sd 1:0:0:0: [sda] Stopping disk [207167.423295] sd 2:0:0:0: [sdb] Stopping disk [207168.357820] ACPI: EC: interrupt blocked [207168.398342] ACPI: Preparing to enter system sleep state S3 [207168.398982] ACPI: EC: event blocked [207168.398983] ACPI: EC: EC stopped [207168.398984] PM: Saving platform NVS memory [207168.399055] Disabling non-boot CPUs ... [207168.400967] smpboot: CPU 1 is now offline [207168.403766] smpboot: CPU 2 is now offline [207168.407039] smpboot: CPU 3 is now offline [207168.410435] smpboot: CPU 4 is now offline [207168.413317] smpboot: CPU 5 is now offline [207168.416215] smpboot: CPU 6 is now offline [207168.419164] smpboot: CPU 7 is now offline [207168.423081] ACPI: Low-level resume complete [207168.423191] ACPI: EC: EC started [207168.423191] PM: Restoring platform NVS memory [207168.426488] Enabling non-boot CPUs ... [207168.426553] x86: Booting SMP configuration: [207168.426554] smpboot: Booting Node 0 Processor 1 APIC 0x2 [207168.427083] microcode: sig=0x806ea, pf=0x80, revision=0x84 [207168.429956] CPU1 is up [207168.430002] smpboot: Booting Node 0 Processor 2 APIC 0x4 [207168.433419] CPU2 is up [207168.433465] smpboot: Booting Node 0 Processor 3 APIC 0x6 [207168.436930] CPU3 is up [207168.436973] smpboot: Booting Node 0 Processor 4 APIC 0x1 [207168.437584] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [207168.438140] CPU4 is up [207168.438189] smpboot: Booting Node 0 Processor 5 APIC 0x3 [207168.439164] CPU5 is up [207168.439208] smpboot: Booting Node 0 Processor 6 APIC 0x5 [207168.440212] CPU6 is up [207168.440256] smpboot: Booting Node 0 Processor 7 APIC 0x7 [207168.441278] CPU7 is up [207168.445685] ACPI: Waking up from system sleep state S3 [207168.452293] ACPI: EC: interrupt unblocked [207168.549665] ACPI: EC: event unblocked [207168.552083] sd 1:0:0:0: [sda] Starting disk [207168.552085] sd 2:0:0:0: [sdb] Starting disk [207168.759560] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [207168.784904] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [207168.864718] ata1: SATA link down (SStatus 4 SControl 300) [207168.869818] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [207168.990686] ata3.00: configured for UDMA/133 [207169.000770] ahci 0000:00:17.0: port does not support device sleep [207169.001146] ata3.00: Enabling discard_zeroes_data [207169.061049] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [207169.223249] OOM killer enabled. [207169.223250] Restarting tasks ... [207169.225469] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [207169.225976] done. [207169.226820] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [207169.226823] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [207169.280990] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [207169.291086] PM: suspend exit [207169.331293] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [207169.362011] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [207170.920723] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [207170.935945] ata2.00: configured for UDMA/133 [207171.163408] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [207171.268665] r8169 0000:01:00.1 enp1s0f1: Link is Down [207176.172052] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [207176.206033] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [207176.213365] wlp2s0: authenticated [207176.216744] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [207176.228645] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=5) [207176.231633] wlp2s0: associated [207176.242677] ath: EEPROM regdomain: 0x8283 [207176.242679] ath: EEPROM indicates we should expect a country code [207176.242680] ath: doing EEPROM country->regdmn map search [207176.242682] ath: country maps to regdmn code: 0x3d [207176.242683] ath: Country alpha2 being used: RU [207176.242684] ath: Regpair used: 0x3d [207176.242686] ath: regdomain 0x8283 dynamically updated by country element [207176.249239] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [207176.252064] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [212019.582431] acer_wmi: Unknown function number - 8 - 1 [213359.479758] acer_wmi: Unknown function number - 8 - 0 [215420.157975] PM: suspend entry (deep) [215420.160735] Filesystems sync: 0.002 seconds [215420.161144] Freezing user space processes ... (elapsed 0.006 seconds) done. [215420.167238] OOM killer disabled. [215420.167239] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [215420.168745] printk: Suspending console(s) (use no_console_suspend to debug) [215420.169534] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [215420.197119] sd 1:0:0:0: [sda] Synchronizing SCSI cache [215420.197533] sd 1:0:0:0: [sda] Stopping disk [215420.200803] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [215420.200977] sd 2:0:0:0: [sdb] Stopping disk [215420.964217] ACPI: EC: interrupt blocked [215421.005212] ACPI: Preparing to enter system sleep state S3 [215421.005856] ACPI: EC: event blocked [215421.005856] ACPI: EC: EC stopped [215421.005857] PM: Saving platform NVS memory [215421.005929] Disabling non-boot CPUs ... [215421.007386] smpboot: CPU 1 is now offline [215421.010229] smpboot: CPU 2 is now offline [215421.013487] smpboot: CPU 3 is now offline [215421.016783] smpboot: CPU 4 is now offline [215421.019519] smpboot: CPU 5 is now offline [215421.022226] smpboot: CPU 6 is now offline [215421.025041] smpboot: CPU 7 is now offline [215421.028791] ACPI: Low-level resume complete [215421.028899] ACPI: EC: EC started [215421.028900] PM: Restoring platform NVS memory [215421.032145] Enabling non-boot CPUs ... [215421.032211] x86: Booting SMP configuration: [215421.032212] smpboot: Booting Node 0 Processor 1 APIC 0x2 [215421.032742] microcode: sig=0x806ea, pf=0x80, revision=0x84 [215421.035779] CPU1 is up [215421.035825] smpboot: Booting Node 0 Processor 2 APIC 0x4 [215421.039250] CPU2 is up [215421.039293] smpboot: Booting Node 0 Processor 3 APIC 0x6 [215421.042737] CPU3 is up [215421.042778] smpboot: Booting Node 0 Processor 4 APIC 0x1 [215421.043387] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [215421.043950] CPU4 is up [215421.044000] smpboot: Booting Node 0 Processor 5 APIC 0x3 [215421.044972] CPU5 is up [215421.045013] smpboot: Booting Node 0 Processor 6 APIC 0x5 [215421.046004] CPU6 is up [215421.046047] smpboot: Booting Node 0 Processor 7 APIC 0x7 [215421.047058] CPU7 is up [215421.051467] ACPI: Waking up from system sleep state S3 [215421.058136] ACPI: EC: interrupt unblocked [215421.156523] ACPI: EC: event unblocked [215421.157253] sd 1:0:0:0: [sda] Starting disk [215421.157254] sd 2:0:0:0: [sdb] Starting disk [215421.366087] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [215421.395751] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [215421.471638] ata1: SATA link down (SStatus 4 SControl 300) [215421.471668] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [215421.563303] ata3.00: configured for UDMA/133 [215421.573370] ahci 0000:00:17.0: port does not support device sleep [215421.597844] ata3.00: Enabling discard_zeroes_data [215421.671917] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [215421.822591] OOM killer enabled. [215421.822592] Restarting tasks ... [215421.829053] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [215421.829599] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [215421.829603] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [215421.831954] done. [215421.883725] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [215421.899729] PM: suspend exit [215421.916218] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [215421.947533] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [215423.535628] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [215423.550763] ata2.00: configured for UDMA/133 [215423.739453] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [215423.855477] r8169 0000:01:00.1 enp1s0f1: Link is Down [215426.410223] acer_wmi: Unknown function number - 8 - 1 [215428.756370] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [215428.790158] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [215428.891494] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [215428.995483] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [215429.103585] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [215433.813098] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [215433.843929] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [215433.951555] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [215434.055625] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [215434.159486] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [215439.273054] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [215439.303998] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [215439.407446] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [215439.511468] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [215439.619518] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [215445.233868] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [215445.264656] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [215445.269346] wlp2s0: authenticated [215445.271359] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [215445.279405] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=10) [215445.282201] wlp2s0: associated [215445.293783] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [215445.294542] ath: EEPROM regdomain: 0x8283 [215445.294544] ath: EEPROM indicates we should expect a country code [215445.294545] ath: doing EEPROM country->regdmn map search [215445.294547] ath: country maps to regdmn code: 0x3d [215445.294548] ath: Country alpha2 being used: RU [215445.294549] ath: Regpair used: 0x3d [215445.294551] ath: regdomain 0x8283 dynamically updated by country element [215445.330142] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [215795.724324] acer_wmi: Unknown function number - 8 - 0 [216748.366204] acer_wmi: Unknown function number - 8 - 1 [219329.272682] acer_wmi: Unknown function number - 8 - 0 [220215.599631] acer_wmi: Unknown function number - 8 - 1 [220816.125291] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [220816.157296] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [220816.163404] wlp2s0: authenticated [220816.170260] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [220816.180909] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=5) [220816.183222] wlp2s0: associated [220816.192591] ath: EEPROM regdomain: 0x8283 [220816.192592] ath: EEPROM indicates we should expect a country code [220816.192592] ath: doing EEPROM country->regdmn map search [220816.192593] ath: country maps to regdmn code: 0x3d [220816.192593] ath: Country alpha2 being used: RU [220816.192594] ath: Regpair used: 0x3d [220816.192594] ath: regdomain 0x8283 dynamically updated by country element [220816.206172] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [220816.266338] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [222365.513620] acer_wmi: Unknown function number - 8 - 0 [222758.697981] acer_wmi: Unknown function number - 8 - 1 [224313.918173] acer_wmi: Unknown function number - 8 - 0 [230664.843575] acer_wmi: Unknown function number - 8 - 1 [232809.305750] acer_wmi: Unknown function number - 8 - 0 [238147.192038] PM: suspend entry (deep) [238147.486158] Filesystems sync: 0.294 seconds [238147.487464] Freezing user space processes ... (elapsed 0.003 seconds) done. [238147.490632] OOM killer disabled. [238147.490633] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [238147.491920] printk: Suspending console(s) (use no_console_suspend to debug) [238147.492390] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [238147.527337] sd 1:0:0:0: [sda] Synchronizing SCSI cache [238147.527780] sd 1:0:0:0: [sda] Stopping disk [238147.531314] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [238147.532269] sd 2:0:0:0: [sdb] Stopping disk [238148.170303] ACPI: EC: interrupt blocked [238148.211730] ACPI: Preparing to enter system sleep state S3 [238148.212378] ACPI: EC: event blocked [238148.212378] ACPI: EC: EC stopped [238148.212379] PM: Saving platform NVS memory [238148.212451] Disabling non-boot CPUs ... [238148.213923] smpboot: CPU 1 is now offline [238148.217051] smpboot: CPU 2 is now offline [238148.220543] smpboot: CPU 3 is now offline [238148.224043] smpboot: CPU 4 is now offline [238148.227061] smpboot: CPU 5 is now offline [238148.229980] smpboot: CPU 6 is now offline [238148.232983] smpboot: CPU 7 is now offline [238148.236939] ACPI: Low-level resume complete [238148.237048] ACPI: EC: EC started [238148.237049] PM: Restoring platform NVS memory [238148.240389] Enabling non-boot CPUs ... [238148.240457] x86: Booting SMP configuration: [238148.240458] smpboot: Booting Node 0 Processor 1 APIC 0x2 [238148.240987] microcode: sig=0x806ea, pf=0x80, revision=0x84 [238148.243864] CPU1 is up [238148.243909] smpboot: Booting Node 0 Processor 2 APIC 0x4 [238148.247323] CPU2 is up [238148.247368] smpboot: Booting Node 0 Processor 3 APIC 0x6 [238148.250812] CPU3 is up [238148.250854] smpboot: Booting Node 0 Processor 4 APIC 0x1 [238148.251496] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [238148.252042] CPU4 is up [238148.252095] smpboot: Booting Node 0 Processor 5 APIC 0x3 [238148.253079] CPU5 is up [238148.253121] smpboot: Booting Node 0 Processor 6 APIC 0x5 [238148.254126] CPU6 is up [238148.254168] smpboot: Booting Node 0 Processor 7 APIC 0x7 [238148.255184] CPU7 is up [238148.259584] ACPI: Waking up from system sleep state S3 [238148.266224] ACPI: EC: interrupt unblocked [238148.366483] ACPI: EC: event unblocked [238148.366867] sd 1:0:0:0: [sda] Starting disk [238148.366890] sd 2:0:0:0: [sdb] Starting disk [238148.576934] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [238148.602269] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [238148.680406] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [238148.680432] ata1: SATA link down (SStatus 4 SControl 300) [238148.777123] ata3.00: configured for UDMA/133 [238148.787260] ahci 0000:00:17.0: port does not support device sleep [238148.818385] ata3.00: Enabling discard_zeroes_data [238148.878501] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [238149.028999] OOM killer enabled. [238149.029000] Restarting tasks ... [238149.034266] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [238149.034762] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [238149.034767] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [238149.037465] done. [238149.088944] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [238149.096936] PM: suspend exit [238149.109560] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [238149.140504] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [238150.726154] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [238150.741185] ata2.00: configured for UDMA/133 [238150.968523] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [238151.074053] r8169 0000:01:00.1 enp1s0f1: Link is Down [238155.995993] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [238156.029824] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [238156.134118] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [238156.238097] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [238156.342109] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [238161.047400] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [238161.078202] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [238161.182106] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [238161.286099] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [238161.390074] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [238166.508375] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [238166.539284] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [238166.543980] wlp2s0: authenticated [238166.546010] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [238166.553659] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=2) [238166.556244] wlp2s0: associated [238166.566118] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [238166.570000] ath: EEPROM regdomain: 0x8283 [238166.570002] ath: EEPROM indicates we should expect a country code [238166.570004] ath: doing EEPROM country->regdmn map search [238166.570005] ath: country maps to regdmn code: 0x3d [238166.570007] ath: Country alpha2 being used: RU [238166.570009] ath: Regpair used: 0x3d [238166.570011] ath: regdomain 0x8283 dynamically updated by country element [238166.635790] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [240543.392606] acer_wmi: Unknown function number - 8 - 1 [240566.684478] PM: suspend entry (deep) [240566.690507] Filesystems sync: 0.006 seconds [240566.691252] Freezing user space processes ... (elapsed 0.002 seconds) done. [240566.693924] OOM killer disabled. [240566.693924] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [240566.695220] printk: Suspending console(s) (use no_console_suspend to debug) [240566.723500] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [240566.743154] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [240566.746859] sd 2:0:0:0: [sdb] Stopping disk [240566.746905] sd 1:0:0:0: [sda] Synchronizing SCSI cache [240566.747482] sd 1:0:0:0: [sda] Stopping disk [240567.510265] ACPI: EC: interrupt blocked [240567.551266] ACPI: Preparing to enter system sleep state S3 [240567.551619] ACPI: EC: event blocked [240567.551619] ACPI: EC: EC stopped [240567.551620] PM: Saving platform NVS memory [240567.551665] Disabling non-boot CPUs ... [240567.552914] smpboot: CPU 1 is now offline [240567.555138] smpboot: CPU 2 is now offline [240567.557066] smpboot: CPU 3 is now offline [240567.559178] smpboot: CPU 4 is now offline [240567.561105] smpboot: CPU 5 is now offline [240567.563010] smpboot: CPU 6 is now offline [240567.565027] smpboot: CPU 7 is now offline [240567.567637] ACPI: Low-level resume complete [240567.567721] ACPI: EC: EC started [240567.567721] PM: Restoring platform NVS memory [240567.569881] Enabling non-boot CPUs ... [240567.569922] x86: Booting SMP configuration: [240567.569923] smpboot: Booting Node 0 Processor 1 APIC 0x2 [240567.570223] microcode: sig=0x806ea, pf=0x80, revision=0x84 [240567.571846] CPU1 is up [240567.571874] smpboot: Booting Node 0 Processor 2 APIC 0x4 [240567.573796] CPU2 is up [240567.573822] smpboot: Booting Node 0 Processor 3 APIC 0x6 [240567.575763] CPU3 is up [240567.575791] smpboot: Booting Node 0 Processor 4 APIC 0x1 [240567.576140] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [240567.576475] CPU4 is up [240567.576504] smpboot: Booting Node 0 Processor 5 APIC 0x3 [240567.577084] CPU5 is up [240567.577112] smpboot: Booting Node 0 Processor 6 APIC 0x5 [240567.577706] CPU6 is up [240567.577734] smpboot: Booting Node 0 Processor 7 APIC 0x7 [240567.578331] CPU7 is up [240567.581069] ACPI: Waking up from system sleep state S3 [240567.584887] ACPI: EC: interrupt unblocked [240567.681602] ACPI: EC: event unblocked [240567.681820] sd 2:0:0:0: [sdb] Starting disk [240567.681870] sd 1:0:0:0: [sda] Starting disk [240567.891690] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [240567.917526] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [240567.996169] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [240567.996191] ata1: SATA link down (SStatus 4 SControl 300) [240568.097947] ata3.00: configured for UDMA/133 [240568.108056] ahci 0000:00:17.0: port does not support device sleep [240568.110671] ata3.00: Enabling discard_zeroes_data [240568.193607] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [240568.344359] OOM killer enabled. [240568.344360] Restarting tasks ... [240568.346713] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [240568.347320] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [240568.347323] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [240568.357236] done. [240568.401529] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [240568.420194] PM: suspend exit [240568.425460] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [240568.458723] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [240570.057319] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [240570.072527] ata2.00: configured for UDMA/133 [240570.267115] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [240570.381244] r8169 0000:01:00.1 enp1s0f1: Link is Down [240575.275799] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [240575.309914] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [240575.413255] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [240575.517191] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [240575.621243] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [240580.327376] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [240580.358729] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [240580.465189] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [240580.569192] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [240580.673125] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [240585.782150] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [240585.812947] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [240585.817621] wlp2s0: authenticated [240585.821023] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [240585.829183] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=8) [240585.831568] wlp2s0: associated [240585.840676] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [240585.842596] ath: EEPROM regdomain: 0x8283 [240585.842598] ath: EEPROM indicates we should expect a country code [240585.842599] ath: doing EEPROM country->regdmn map search [240585.842601] ath: country maps to regdmn code: 0x3d [240585.842602] ath: Country alpha2 being used: RU [240585.842603] ath: Regpair used: 0x3d [240585.842606] ath: regdomain 0x8283 dynamically updated by country element [240585.865663] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [246195.271438] acer_wmi: Unknown function number - 8 - 1 [247288.671951] acer_wmi: Unknown function number - 8 - 0 [250267.821009] acer_wmi: Unknown function number - 8 - 1 [250670.507318] acer_wmi: Unknown function number - 8 - 0 [255636.715023] acer_wmi: Unknown function number - 8 - 1 [258151.195001] acer_wmi: Unknown function number - 8 - 0 [263363.826395] acer_wmi: Unknown function number - 8 - 1 [263582.759441] usb 1-1: new high-speed USB device number 5 using xhci_hcd [263582.909545] usb 1-1: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 3.18 [263582.909546] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [263582.909547] usb 1-1: Product: LG-H870 [263582.909548] usb 1-1: Manufacturer: LGE [263582.909549] usb 1-1: SerialNumber: ... [263583.668892] usb 1-1: USB disconnect, device number 5 [263584.111438] usb 1-1: new high-speed USB device number 6 using xhci_hcd [263584.260679] usb 1-1: New USB device found, idVendor=1004, idProduct=633e, bcdDevice= 3.18 [263584.260681] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [263584.260682] usb 1-1: Product: LG-H870 [263584.260682] usb 1-1: Manufacturer: LGE [263584.260683] usb 1-1: SerialNumber: ... [264018.227971] usb 1-1: reset high-speed USB device number 6 using xhci_hcd [264023.752500] usb 1-1: USB disconnect, device number 6 [267707.087924] acer_wmi: Unknown function number - 8 - 0 [268993.810552] PM: suspend entry (deep) [268993.819480] Filesystems sync: 0.008 seconds [268993.819991] Freezing user space processes ... (elapsed 0.002 seconds) done. [268993.822870] OOM killer disabled. [268993.822870] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [268993.824238] printk: Suspending console(s) (use no_console_suspend to debug) [268993.824991] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [268993.851217] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [268993.851347] sd 1:0:0:0: [sda] Synchronizing SCSI cache [268993.851749] sd 1:0:0:0: [sda] Stopping disk [268993.852090] sd 2:0:0:0: [sdb] Stopping disk [268994.766550] ACPI: EC: interrupt blocked [268994.807620] ACPI: Preparing to enter system sleep state S3 [268994.808266] ACPI: EC: event blocked [268994.808267] ACPI: EC: EC stopped [268994.808268] PM: Saving platform NVS memory [268994.808339] Disabling non-boot CPUs ... [268994.809789] smpboot: CPU 1 is now offline [268994.812910] smpboot: CPU 2 is now offline [268994.816063] smpboot: CPU 3 is now offline [268994.819605] smpboot: CPU 4 is now offline [268994.822598] smpboot: CPU 5 is now offline [268994.825490] smpboot: CPU 6 is now offline [268994.828506] smpboot: CPU 7 is now offline [268994.832484] ACPI: Low-level resume complete [268994.832594] ACPI: EC: EC started [268994.832594] PM: Restoring platform NVS memory [268994.836038] Enabling non-boot CPUs ... [268994.836104] x86: Booting SMP configuration: [268994.836106] smpboot: Booting Node 0 Processor 1 APIC 0x2 [268994.836634] microcode: sig=0x806ea, pf=0x80, revision=0x84 [268994.839503] CPU1 is up [268994.839547] smpboot: Booting Node 0 Processor 2 APIC 0x4 [268994.842968] CPU2 is up [268994.843011] smpboot: Booting Node 0 Processor 3 APIC 0x6 [268994.846445] CPU3 is up [268994.846485] smpboot: Booting Node 0 Processor 4 APIC 0x1 [268994.847127] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [268994.847678] CPU4 is up [268994.847729] smpboot: Booting Node 0 Processor 5 APIC 0x3 [268994.848711] CPU5 is up [268994.848753] smpboot: Booting Node 0 Processor 6 APIC 0x5 [268994.849745] CPU6 is up [268994.849787] smpboot: Booting Node 0 Processor 7 APIC 0x7 [268994.850809] CPU7 is up [268994.855220] ACPI: Waking up from system sleep state S3 [268994.862031] ACPI: EC: interrupt unblocked [268994.958473] ACPI: EC: event unblocked [268994.959049] sd 2:0:0:0: [sdb] Starting disk [268994.959051] sd 1:0:0:0: [sda] Starting disk [268995.168461] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [268995.198179] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [268995.274643] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [268995.274666] ata1: SATA link down (SStatus 4 SControl 300) [268995.365392] ata3.00: configured for UDMA/133 [268995.375501] ahci 0000:00:17.0: port does not support device sleep [268995.407277] ata3.00: Enabling discard_zeroes_data [268995.474362] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [268995.624836] OOM killer enabled. [268995.624837] Restarting tasks ... done. [268995.628111] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [268995.628546] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [268995.628550] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [268995.682000] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [268995.682779] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [268995.700547] PM: suspend exit [268995.713014] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [268997.313999] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [268997.329030] ata2.00: configured for UDMA/133 [268997.550021] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [268997.665854] r8169 0000:01:00.1 enp1s0f1: Link is Down [269002.533260] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [269002.567267] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [269002.575068] wlp2s0: authenticated [269002.577941] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [269002.593503] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=2) [269002.596258] wlp2s0: associated [269002.602968] ath: EEPROM regdomain: 0x8283 [269002.602969] ath: EEPROM indicates we should expect a country code [269002.602971] ath: doing EEPROM country->regdmn map search [269002.602973] ath: country maps to regdmn code: 0x3d [269002.602974] ath: Country alpha2 being used: RU [269002.602975] ath: Regpair used: 0x3d [269002.602976] ath: regdomain 0x8283 dynamically updated by country element [269002.615909] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [269002.692005] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [273622.333965] acer_wmi: Unknown function number - 8 - 1 [275189.713570] PM: suspend entry (deep) [275190.085201] Filesystems sync: 0.371 seconds [275190.085566] Freezing user space processes ... (elapsed 0.001 seconds) done. [275190.087131] OOM killer disabled. [275190.087132] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [275190.088493] printk: Suspending console(s) (use no_console_suspend to debug) [275190.089207] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [275190.110930] sd 1:0:0:0: [sda] Synchronizing SCSI cache [275190.110952] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [275190.111880] sd 2:0:0:0: [sdb] Stopping disk [275190.139672] sd 1:0:0:0: [sda] Stopping disk [275191.278359] ACPI: EC: interrupt blocked [275191.319350] ACPI: Preparing to enter system sleep state S3 [275191.319701] ACPI: EC: event blocked [275191.319702] ACPI: EC: EC stopped [275191.319702] PM: Saving platform NVS memory [275191.319747] Disabling non-boot CPUs ... [275191.320997] smpboot: CPU 1 is now offline [275191.323142] smpboot: CPU 2 is now offline [275191.325325] smpboot: CPU 3 is now offline [275191.327713] smpboot: CPU 4 is now offline [275191.329842] smpboot: CPU 5 is now offline [275191.331906] smpboot: CPU 6 is now offline [275191.334003] smpboot: CPU 7 is now offline [275191.336972] ACPI: Low-level resume complete [275191.337055] ACPI: EC: EC started [275191.337056] PM: Restoring platform NVS memory [275191.339099] Enabling non-boot CPUs ... [275191.339143] x86: Booting SMP configuration: [275191.339144] smpboot: Booting Node 0 Processor 1 APIC 0x2 [275191.339445] microcode: sig=0x806ea, pf=0x80, revision=0x84 [275191.341071] CPU1 is up [275191.341097] smpboot: Booting Node 0 Processor 2 APIC 0x4 [275191.343045] CPU2 is up [275191.343074] smpboot: Booting Node 0 Processor 3 APIC 0x6 [275191.345024] CPU3 is up [275191.345051] smpboot: Booting Node 0 Processor 4 APIC 0x1 [275191.345421] microcode: sig=0x806ea, pf=0x80, revision=0xc6 [275191.345747] CPU4 is up [275191.345779] smpboot: Booting Node 0 Processor 5 APIC 0x3 [275191.346358] CPU5 is up [275191.346383] smpboot: Booting Node 0 Processor 6 APIC 0x5 [275191.346972] CPU6 is up [275191.346998] smpboot: Booting Node 0 Processor 7 APIC 0x7 [275191.347606] CPU7 is up [275191.350370] ACPI: Waking up from system sleep state S3 [275191.354179] ACPI: EC: interrupt unblocked [275191.453761] ACPI: EC: event unblocked [275191.453987] sd 1:0:0:0: [sda] Starting disk [275191.453988] sd 2:0:0:0: [sdb] Starting disk [275191.663496] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [275191.689951] usb 1-5: reset full-speed USB device number 2 using xhci_hcd [275191.768546] ata1: SATA link down (SStatus 4 SControl 300) [275191.768570] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [275191.863057] ata3.00: configured for UDMA/133 [275191.873740] ahci 0000:00:17.0: port does not support device sleep [275191.897535] ata3.00: Enabling discard_zeroes_data [275191.966047] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [275192.129958] OOM killer enabled. [275192.129959] Restarting tasks ... [275192.133103] mei_hdcp mei::HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [275192.133580] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [275192.133582] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [275192.141329] done. [275192.187649] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [275192.210161] PM: suspend exit [275192.277763] psmouse serio1: synaptics: queried max coordinates: x [..5658], y [..4652] [275192.309831] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1246..] [275193.817387] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [275193.833033] ata2.00: configured for UDMA/133 [275193.960744] Generic Realtek PHY r8169-101:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-101:00, irq=IGNORE) [275194.065583] r8169 0000:01:00.1 enp1s0f1: Link is Down [275194.449450] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [275194.468163] ata2.00: configured for UDMA/133 [275195.739975] acer_wmi: Unknown function number - 8 - 0 [275198.951264] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [275198.985088] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [275199.089461] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [275199.193495] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [275199.297419] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [275204.004082] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [275204.036678] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [275204.141872] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [275204.245517] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [275204.349894] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [275209.457124] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [275209.488844] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [275209.593936] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [275209.697909] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [275209.801912] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [275215.410683] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [275215.442409] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [275215.545945] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [275215.649936] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [275215.753597] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [275224.793571] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [275224.825210] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [275224.929550] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [275225.033554] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [275225.137602] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [275234.729491] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [275234.760400] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [275234.865658] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [275234.969649] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 3/3) [275235.073648] wlp2s0: authentication with XX:XX:XX:XX:XX:XX timed out [275253.798453] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [275253.832094] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [275253.836466] wlp2s0: authenticated [275253.837671] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [275253.846687] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1631 status=0 aid=2) [275253.849781] wlp2s0: associated [275253.849838] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [275253.857984] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [275253.858274] ath: EEPROM regdomain: 0x8283 [275253.858276] ath: EEPROM indicates we should expect a country code [275253.858278] ath: doing EEPROM country->regdmn map search [275253.858279] ath: country maps to regdmn code: 0x3d [275253.858280] ath: Country alpha2 being used: RU [275253.858281] ath: Regpair used: 0x3d [275253.858283] ath: regdomain 0x8283 dynamically updated by country element