[ 0.000000] Linux version 4.12.14-lp151.28.40-default (XXX@XXX) (gcc version 7.5.0 (SUSE Linux) ) #1 SMP Fri Mar 6 13:48:15 UTC 2020 (f0f1262) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.40-default root=/dev/mapper/XXXXXXXXXXX splash=silent resume=/dev/system/swap mitigations=auto quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfba133f] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfba3340-0x00000000dfba339f] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfba33a0-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011bffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq dc7900 Convertible Minitower/3032h, BIOS 786G1 v01.26 07/12/2011 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 0DFE00000 mask FFFE00000 uncachable [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] e820: update [mem 0xdfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdfba1 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffffffffff200bf0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x0308e000, 0x0308efff] PGTABLE [ 0.000000] BRK [0x0308f000, 0x0308ffff] PGTABLE [ 0.000000] BRK [0x03090000, 0x03090fff] PGTABLE [ 0.000000] BRK [0x03091000, 0x03091fff] PGTABLE [ 0.000000] BRK [0x03092000, 0x03092fff] PGTABLE [ 0.000000] BRK [0x03093000, 0x03093fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36357000-0x371a2fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E5810 000014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 0x00000000DFBC5440 000040 (v01 HPQOEM SLIC-BPC 20110712 00000000) [ 0.000000] ACPI: FACP 0x00000000DFBC54E8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000050/0x0 (20170303/tbfadt-624) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20170303/tbfadt-674) [ 0.000000] ACPI: DSDT 0x00000000DFBC5A27 00A6ED (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x00000000DFBC5400 000040 [ 0.000000] ACPI: APIC 0x00000000DFBC555C 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: ASF! 0x00000000DFBC55E0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: MCFG 0x00000000DFBC5643 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: TCPA 0x00000000DFBC567F 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: SLIC 0x00000000DFBC56B1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: HPET 0x00000000DFBC5827 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011bffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11bfe8000-0x11bffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011bffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dfba0fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011bffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011bffffff] [ 0.000000] On node 0 totalpages: 1030975 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14255 pages used for memmap [ 0.000000] DMA32 zone: 912289 pages, LIFO batch:63 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 114688 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfba1000-0xdfba3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfba3000-0xdfba3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfba4000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 48 pages/cpu @ffff88011bc00000 s159744 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s159744 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1014843 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-lp151.28.40-default root=/dev/mapper/XXXXXXXXXXX splash=silent resume=/dev/system/swap mitigations=auto quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Memory: 3943396K/4123900K available (10256K kernel code, 1479K rwdata, 3356K rodata, 2104K init, 9888K bss, 180504K reserved, 0K cma-reserved) [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 34429 entries in 135 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3158.902 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6317.80 BogoMIPS (lpj=12635608) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170303 [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.009198] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010065] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010106] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010138] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010386] CPU0: Thermal monitoring enabled (TM2) [ 0.010388] process: using mwait in idle threads [ 0.010393] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.010393] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.010395] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.010397] Spectre V2 : Mitigation: Full generic retpoline [ 0.010397] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.010398] Speculative Store Bypass: Vulnerable [ 0.010426] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.010574] Freeing SMP alternatives memory: 32K [ 0.012454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.056000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.056000] ... version: 2 [ 0.056000] ... bit width: 40 [ 0.056000] ... generic registers: 2 [ 0.056000] ... value mask: 000000ffffffffff [ 0.056000] ... max period: 000000007fffffff [ 0.056000] ... fixed-purpose events: 3 [ 0.056000] ... event mask: 0000000700000003 [ 0.056000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.056000] smp: Bringing up secondary CPUs ... [ 0.056000] x86: Booting SMP configuration: [ 0.056000] .... node #0, CPUs: #1 [ 0.056028] smp: Brought up 1 node, 2 CPUs [ 0.056028] smpboot: Max logical packages: 2 [ 0.056028] smpboot: Total of 2 processors activated (12635.60 BogoMIPS) [ 0.058387] devtmpfs: initialized [ 0.058387] x86/mm: Memory block size: 128MB [ 0.061373] evm: security.selinux [ 0.061374] evm: security.ima [ 0.061374] evm: security.capability [ 0.061404] PM: Registering ACPI NVS region [mem 0xdfba3340-0xdfba339f] (96 bytes) [ 0.061404] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.061404] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.061404] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.061404] pinctrl core: initialized pinctrl subsystem [ 0.061404] RTC time: 14:33:27, date: 03/24/20 [ 0.061404] NET: Registered protocol family 16 [ 0.061404] cpuidle: using governor ladder [ 0.061404] cpuidle: using governor menu [ 0.061404] ACPI: bus type PCI registered [ 0.061404] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.061404] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.061404] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.061404] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override. [ 0.061404] PCI: Using configuration type 1 for base access [ 0.061404] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.061404] ACPI: Added _OSI(Module Device) [ 0.061404] ACPI: Added _OSI(Processor Device) [ 0.061404] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.061404] ACPI: Added _OSI(Processor Aggregator Device) [ 0.067029] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.068075] ACPI: Dynamic OEM Table Load: [ 0.068080] ACPI: SSDT 0xFFFF88011660BC00 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) [ 0.068336] ACPI: Dynamic OEM Table Load: [ 0.068336] ACPI: SSDT 0xFFFF880116619400 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E) [ 0.068351] ACPI: Interpreter enabled [ 0.068369] ACPI: (supports S0 S3 S4 S5) [ 0.068370] ACPI: Using IOAPIC for interrupt routing [ 0.068392] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.068580] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.072347] acpi LNXCPU:00: Invalid PBLK length [7] [ 0.072359] acpi LNXCPU:01: Invalid PBLK length [7] [ 0.076039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.076043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.076047] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20170303/nsarguments-164) [ 0.076118] ACPI BIOS Error (bug): Failure creating [\_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20170303/dsfield-179) [ 0.076125] ACPI Error: Method parse/execution failed \_SB.PCI0._OSC, AE_ALREADY_EXISTS (20170303/psparse-516) [ 0.076135] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 0.076146] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.076586] PCI host bridge to bus 0000:00 [ 0.076588] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window] [ 0.076589] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.076590] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff window] [ 0.076591] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff window] [ 0.076593] pci_bus 0000:00: root bus resource [io 0x7000-0xafff window] [ 0.076594] pci_bus 0000:00: root bus resource [io 0xb000-0xffff window] [ 0.076595] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.076596] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff window] [ 0.076597] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.076598] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.076605] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 [ 0.076624] DMAR: Forcing write-buffer flush capability [ 0.076624] DMAR: Disabling IOMMU for graphics on this chipset [ 0.076706] pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400 [ 0.076738] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.076830] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000 [ 0.076852] pci 0000:00:03.0: reg 0x10: [mem 0xf0027100-0xf002710f 64bit] [ 0.076937] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.077017] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185 [ 0.077029] pci 0000:00:03.2: reg 0x10: [io 0x2230-0x2237] [ 0.077035] pci 0000:00:03.2: reg 0x14: [io 0x2258-0x225b] [ 0.077041] pci 0000:00:03.2: reg 0x18: [io 0x2238-0x223f] [ 0.077047] pci 0000:00:03.2: reg 0x1c: [io 0x225c-0x225f] [ 0.077053] pci 0000:00:03.2: reg 0x20: [io 0x2220-0x222f] [ 0.077156] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002 [ 0.077175] pci 0000:00:03.3: reg 0x10: [io 0x2240-0x2247] [ 0.077185] pci 0000:00:03.3: reg 0x14: [mem 0xf0024000-0xf0024fff] [ 0.077372] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 [ 0.077384] pci 0000:00:19.0: reg 0x10: [mem 0xf0000000-0xf001ffff] [ 0.077391] pci 0000:00:19.0: reg 0x14: [mem 0xf0025000-0xf0025fff] [ 0.077397] pci 0000:00:19.0: reg 0x18: [io 0x2100-0x211f] [ 0.077445] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.077532] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 [ 0.077565] pci 0000:00:1a.0: reg 0x20: [io 0x2120-0x213f] [ 0.077678] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 [ 0.077711] pci 0000:00:1a.1: reg 0x20: [io 0x2140-0x215f] [ 0.077823] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 [ 0.077857] pci 0000:00:1a.2: reg 0x20: [io 0x2160-0x217f] [ 0.077974] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 [ 0.077988] pci 0000:00:1a.7: reg 0x10: [mem 0xf0026800-0xf0026bff] [ 0.078059] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.078150] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 [ 0.078164] pci 0000:00:1b.0: reg 0x10: [mem 0xf0020000-0xf0023fff 64bit] [ 0.078223] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.078310] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400 [ 0.078370] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.078468] pci 0000:00:1c.4: [8086:3a78] type 01 class 0x060400 [ 0.078530] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.078627] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 [ 0.078660] pci 0000:00:1d.0: reg 0x20: [io 0x2180-0x219f] [ 0.078772] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 [ 0.078806] pci 0000:00:1d.1: reg 0x20: [io 0x21a0-0x21bf] [ 0.078918] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 [ 0.078951] pci 0000:00:1d.2: reg 0x20: [io 0x21c0-0x21df] [ 0.079069] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 [ 0.079084] pci 0000:00:1d.7: reg 0x10: [mem 0xf0026c00-0xf0026fff] [ 0.079154] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.079243] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.079363] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100 [ 0.079526] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601 [ 0.079538] pci 0000:00:1f.2: reg 0x10: [io 0x2248-0x224f] [ 0.079544] pci 0000:00:1f.2: reg 0x14: [io 0x2260-0x2263] [ 0.079549] pci 0000:00:1f.2: reg 0x18: [io 0x2250-0x2257] [ 0.079555] pci 0000:00:1f.2: reg 0x1c: [io 0x2264-0x2267] [ 0.079561] pci 0000:00:1f.2: reg 0x20: [io 0x21e0-0x21ff] [ 0.079567] pci 0000:00:1f.2: reg 0x24: [mem 0xf0026000-0xf00267ff] [ 0.079601] pci 0000:00:1f.2: PME# supported from D3hot [ 0.079745] pci 0000:01:00.0: [1002:9598] type 00 class 0x030000 [ 0.079758] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.079766] pci 0000:01:00.0: reg 0x18: [mem 0xf0100000-0xf010ffff 64bit] [ 0.079772] pci 0000:01:00.0: reg 0x20: [io 0x1100-0x11ff] [ 0.079782] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.079814] pci 0000:01:00.0: supports D1 D2 [ 0.079871] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.079873] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.079874] pci 0000:00:01.0: bridge window [mem 0xf0100000-0xf01fffff] [ 0.079877] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.079939] pci 0000:00:1c.0: PCI bridge to [bus 20] [ 0.080008] pci 0000:00:1c.4: PCI bridge to [bus 30] [ 0.080147] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 0.080154] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode) [ 0.080155] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.080156] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff window] (subtractive decode) [ 0.080157] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff window] (subtractive decode) [ 0.080158] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff window] (subtractive decode) [ 0.080159] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff window] (subtractive decode) [ 0.080161] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.080162] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff window] (subtractive decode) [ 0.080163] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.080614] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.080694] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.080773] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.080852] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.080931] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.081010] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.081089] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.081168] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.081381] iommu: Default domain type: Passthrough [ 0.081394] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.081394] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.081394] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.081394] vgaarb: loaded [ 0.081394] SCSI subsystem initialized [ 0.081394] libata version 3.00 loaded. [ 0.081394] Linux cec interface: v0.10 [ 0.081394] EDAC MC: Ver: 3.0.0 [ 0.081394] PCI: Using ACPI for IRQ routing [ 0.081394] PCI: pci_cache_line_size set to 64 bytes [ 0.081394] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.081394] e820: reserve RAM buffer [mem 0xdfba1340-0xdfffffff] [ 0.081394] NetLabel: Initializing [ 0.081394] NetLabel: domain hash size = 128 [ 0.081394] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.081394] NetLabel: unlabeled traffic allowed by default [ 0.081394] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.081394] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0 [ 0.081394] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.085017] hpet: hpet2 irq 24 for MSI [ 0.085025] hpet: hpet3 irq 25 for MSI [ 0.085026] clocksource: Switched to clocksource hpet [ 0.096627] VFS: Disk quotas dquot_6.6.0 [ 0.096657] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.096781] AppArmor: AppArmor Filesystem Enabled [ 0.096825] pnp: PnP ACPI init [ 0.096912] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.096939] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.096963] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.097256] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.097472] pnp 00:04: [dma 2] [ 0.097498] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.097546] pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.097837] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.097886] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.097889] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.097940] system 00:08: [io 0x0400-0x041f] has been reserved [ 0.097941] system 00:08: [io 0x0420-0x043f] has been reserved [ 0.097942] system 00:08: [io 0x0440-0x045f] has been reserved [ 0.097944] system 00:08: [io 0x0460-0x047f] has been reserved [ 0.097945] system 00:08: [io 0x0800-0x087f] has been reserved [ 0.097946] system 00:08: [io 0x0880-0x08ff] has been reserved [ 0.097948] system 00:08: [io 0xf800-0xf81f] has been reserved [ 0.097950] system 00:08: [io 0xf820-0xf83f] has been reserved [ 0.097951] system 00:08: [io 0xf840-0xf85f] has been reserved [ 0.097952] system 00:08: [io 0xf860-0xf87f] has been reserved [ 0.097954] system 00:08: [io 0xfa00-0xfa3f] has been reserved [ 0.097955] system 00:08: [io 0xfc00-0xfc7f] has been reserved [ 0.097956] system 00:08: [io 0xfc80-0xfcff] has been reserved [ 0.097958] system 00:08: [io 0xfe00-0xfe7f] has been reserved [ 0.097959] system 00:08: [io 0xfe80-0xfeff] has been reserved [ 0.097961] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.098368] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.098370] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.098371] system 00:09: [mem 0x000e4000-0x000fffff] could not be reserved [ 0.098372] system 00:09: [mem 0xfec01000-0xfecfffff] has been reserved [ 0.098374] system 00:09: [mem 0xfed00400-0xfed3ffff] has been reserved [ 0.098375] system 00:09: [mem 0xfed45000-0xffffffff] has been reserved [ 0.098376] system 00:09: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.098378] system 00:09: [mem 0x000d1c00-0x000e3fff] has been reserved [ 0.098380] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.098391] pnp: PnP ACPI: found 10 devices [ 0.104389] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.104404] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000 [ 0.104407] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000 [ 0.104408] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000 add_align 100000 [ 0.104414] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000 [ 0.104416] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 add_align 100000 [ 0.104418] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 add_align 100000 [ 0.104429] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff] [ 0.104433] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.104434] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8400000-0xf85fffff] [ 0.104437] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.104439] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.104441] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 0.104444] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0120000-0xf013ffff pref] [ 0.104446] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.104448] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.104450] pci 0000:00:01.0: bridge window [mem 0xf0100000-0xf01fffff] [ 0.104452] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.104455] pci 0000:00:1c.0: PCI bridge to [bus 20] [ 0.104456] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.104459] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff] [ 0.104462] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.104466] pci 0000:00:1c.4: PCI bridge to [bus 30] [ 0.104468] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.104471] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff] [ 0.104473] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.104478] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 0.104486] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window] [ 0.104487] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window] [ 0.104488] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff window] [ 0.104489] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff window] [ 0.104490] pci_bus 0000:00: resource 8 [io 0x7000-0xafff window] [ 0.104491] pci_bus 0000:00: resource 9 [io 0xb000-0xffff window] [ 0.104493] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.104494] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff window] [ 0.104495] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window] [ 0.104496] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.104497] pci_bus 0000:01: resource 1 [mem 0xf0100000-0xf01fffff] [ 0.104498] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.104499] pci_bus 0000:20: resource 0 [io 0x3000-0x3fff] [ 0.104500] pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff] [ 0.104502] pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.104503] pci_bus 0000:30: resource 0 [io 0x4000-0x4fff] [ 0.104504] pci_bus 0000:30: resource 1 [mem 0xf8400000-0xf85fffff] [ 0.104505] pci_bus 0000:30: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.104506] pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff window] [ 0.104507] pci_bus 0000:07: resource 5 [io 0x0000-0x0cf7 window] [ 0.104509] pci_bus 0000:07: resource 6 [io 0x1000-0x2fff window] [ 0.104510] pci_bus 0000:07: resource 7 [io 0x3000-0x6fff window] [ 0.104511] pci_bus 0000:07: resource 8 [io 0x7000-0xafff window] [ 0.104512] pci_bus 0000:07: resource 9 [io 0xb000-0xffff window] [ 0.104513] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.104514] pci_bus 0000:07: resource 11 [mem 0xe0000000-0xf3ffffff window] [ 0.104515] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff window] [ 0.104594] NET: Registered protocol family 2 [ 0.104762] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.104891] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.105118] TCP: Hash tables configured (established 32768 bind 32768) [ 0.105173] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.105207] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.105269] NET: Registered protocol family 1 [ 0.105274] NET: Registered protocol family 44 [ 0.107625] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.107626] PCI: CLS 64 bytes, default 64 [ 0.107659] Unpacking initramfs... [ 0.688010] random: fast init done [ 1.457582] Freeing initrd memory: 14640K [ 1.457654] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.457657] software IO TLB [mem 0xdbba1000-0xdfba1000] (64MB) mapped at [ffff8800dbba1000-ffff8800dfba0fff] [ 1.457802] Scanning for low memory corruption every 60 seconds [ 1.458578] workingset: timestamp_bits=37 max_order=20 bucket_order=0 [ 1.458601] zbud: loaded [ 1.460058] Key type asymmetric registered [ 1.460059] Asymmetric key parser 'x509' registered [ 1.460066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.460094] io scheduler noop registered [ 1.460094] io scheduler deadline registered [ 1.460105] io scheduler cfq registered (default) [ 1.460106] io scheduler mq-deadline registered [ 1.460107] io scheduler kyber registered [ 1.460113] io scheduler bfq registered [ 1.460777] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.460799] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.460800] vesafb: scrolling: redraw [ 1.460801] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.460811] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000a00000, using 1216k, total 1216k [ 1.468372] Console: switching to colour frame buffer device 80x30 [ 1.475824] fb0: VESA VGA frame buffer device [ 1.475835] intel_idle: does not run on family 6 model 23 [ 1.475895] Monitor-Mwait will be used to enter C-1 state [ 1.475898] Monitor-Mwait will be used to enter C-2 state [ 1.475900] tsc: Marking TSC unstable due to TSC halts in idle [ 1.476067] GHES: HEST is not enabled! [ 1.476147] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.496540] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.517875] 0000:00:03.3: ttyS4 at I/O 0x2240 (irq = 17, base_baud = 115200) is a 16550A [ 1.518078] Non-volatile memory driver v1.3 [ 1.518099] Linux agpgart interface v0.103 [ 1.521358] tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16) [ 1.539186] tpm tpm0: TPM is disabled/deactivated (0x7) [ 1.544945] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.547820] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.547823] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.547920] mousedev: PS/2 mouse device common for all mice [ 1.547982] rtc_cmos 00:00: RTC can wake from S4 [ 1.548089] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.548108] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.548127] ledtrig-cpu: registered to indicate activity on CPUs [ 1.548137] hidraw: raw HID events driver (C) Jiri Kosina [ 1.548248] NET: Registered protocol family 10 [ 1.553046] Segment Routing with IPv6 [ 1.553196] mce: Using 6 MCE banks [ 1.553220] microcode: sig=0x1067a, pf=0x1, revision=0xa0b [ 1.553249] microcode: Microcode Update Driver: v2.2. [ 1.553355] registered taskstats version 1 [ 1.553368] zswap: loaded using pool lzo/zbud [ 1.553426] page_owner is disabled [ 1.557531] Key type big_key registered [ 1.559579] Key type encrypted registered [ 1.559581] AppArmor: AppArmor sha1 policy hashing enabled [ 1.563696] ima: No TPM chip found, activating TPM-bypass! (rc=7) [ 1.563699] ima: Allocated hash algorithm: sha256 [ 1.563719] evm: HMAC attrs: 0x1 [ 1.563900] Magic number: 12:299:587 [ 1.564014] rtc_cmos 00:00: setting system clock to 2020-03-24 14:33:29 UTC (1585060409) [ 1.564040] PM: Checking hibernation image partition /dev/system/swap [ 1.576894] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.464019] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2d88a20c27f, max_idle_ns: 440795203806 ns [ 2.486479] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input2 [ 2.489479] PM: Hibernation image not present or could not be loaded. [ 2.491579] Freeing unused kernel memory: 2104K [ 2.504014] Write protecting the kernel read-only data: 16384k [ 2.504907] Freeing unused kernel memory: 2020K [ 2.506482] Freeing unused kernel memory: 740K [ 2.513196] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) [ 2.513306] systemd[1]: Detected architecture x86-64. [ 2.513309] systemd[1]: Running in initial RAM disk. [ 2.513325] systemd[1]: Set hostname to ... [ 2.554829] random: systemd: uninitialized urandom read (16 bytes read) [ 2.554869] systemd[1]: Listening on udev Control Socket. [ 2.554914] random: systemd: uninitialized urandom read (16 bytes read) [ 2.555335] systemd[1]: Created slice System Slice. [ 2.555352] random: systemd: uninitialized urandom read (16 bytes read) [ 2.555362] systemd[1]: Reached target Swap. [ 2.555413] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.555463] systemd[1]: Listening on udev Kernel Socket. [ 2.555485] systemd[1]: Reached target Slices. [ 2.583534] alua: device handler registered [ 2.583791] emc: device handler registered [ 2.583997] rdac: device handler registered [ 2.586658] device-mapper: uevent: version 1.0.3 [ 2.586701] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX [ 3.011386] ACPI: bus type USB registered [ 3.011409] usbcore: registered new interface driver usbfs [ 3.011416] usbcore: registered new interface driver hub [ 3.011442] usbcore: registered new device driver usb [ 3.012518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.013045] uhci_hcd: USB Universal Host Controller Interface driver [ 3.013270] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.013275] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.013281] uhci_hcd 0000:00:1a.0: detected 2 ports [ 3.013305] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120 [ 3.016930] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.016932] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.016933] usb usb1: Product: UHCI Host Controller [ 3.016934] usb usb1: Manufacturer: Linux 4.12.14-lp151.28.40-default uhci_hcd [ 3.016935] usb usb1: SerialNumber: ... [ 3.017056] hub 1-0:1.0: USB hub found [ 3.017062] hub 1-0:1.0: 2 ports detected [ 3.017330] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.017334] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.017339] uhci_hcd 0000:00:1a.1: detected 2 ports [ 3.017360] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140 [ 3.017402] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.017403] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.017404] usb usb2: Product: UHCI Host Controller [ 3.017405] usb usb2: Manufacturer: Linux 4.12.14-lp151.28.40-default uhci_hcd [ 3.017407] usb usb2: SerialNumber: ... [ 3.017486] hub 2-0:1.0: USB hub found [ 3.017491] hub 2-0:1.0: 2 ports detected [ 3.025510] ehci-pci: EHCI PCI platform driver [ 3.040148] scsi host0: ata_generic [ 3.077883] FDC 0 is a National Semiconductor PC87306 [ 3.093672] scsi host1: ata_generic [ 3.093727] ata1: PATA max UDMA/100 cmd 0x2230 ctl 0x2258 bmdma 0x2220 irq 18 [ 3.093729] ata2: PATA max UDMA/100 cmd 0x2238 ctl 0x225c bmdma 0x2228 irq 18 [ 3.103135] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.103140] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 3.103151] ehci-pci 0000:00:1a.7: debug port 1 [ 3.107043] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 3.107053] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0026800 [ 3.124018] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.124065] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.124066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.124068] usb usb3: Product: EHCI Host Controller [ 3.124069] usb usb3: Manufacturer: Linux 4.12.14-lp151.28.40-default ehci_hcd [ 3.124070] usb usb3: SerialNumber: ... [ 3.124188] hub 3-0:1.0: USB hub found [ 3.124194] hub 3-0:1.0: 6 ports detected [ 3.142204] [drm] radeon kernel modesetting enabled. [ 3.142277] checking generic (e0000000 130000) vs hw (e0000000 10000000) [ 3.142278] fb: switching to radeondrmfb from VESA VGA [ 3.142300] Console: switching to colour dummy device 80x25 [ 3.142595] [drm] initializing kernel modesetting (RV635 0x1002:0x9598 0x1002:0x0B42 0x00). [ 3.142622] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:09 [mem 0x000d1c00-0x000e3fff] [ 3.142626] caller pci_map_rom+0x58/0xc0 mapping multiple BARs [ 3.142669] ATOM BIOS: 113 [ 3.142689] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 3.142690] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 3.142692] [drm] Detected VRAM RAM=512M, BAR=256M [ 3.142693] [drm] RAM width 128bits DDR [ 3.156759] hub 1-0:1.0: USB hub found [ 3.156768] hub 1-0:1.0: 2 ports detected [ 3.156846] [TTM] Zone kernel: Available graphics memory: 1981466 kiB [ 3.156847] [TTM] Initializing pool allocator [ 3.156851] [TTM] Initializing DMA pool allocator [ 3.156867] [drm] radeon: 512M of VRAM memory ready [ 3.156868] [drm] radeon: 512M of GTT memory ready. [ 3.156877] [drm] Loading RV635 Microcode [ 3.156940] [drm] Internal thermal controller with fan control [ 3.156965] [drm] radeon: power management initialized [ 3.157019] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 3.157685] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 3.184257] hub 2-0:1.0: USB hub found [ 3.184265] hub 2-0:1.0: 2 ports detected [ 3.184536] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.184541] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 3.184551] ehci-pci 0000:00:1d.7: debug port 1 [ 3.188465] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 3.188471] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0026c00 [ 3.208012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.208071] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.208072] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.208073] usb usb4: Product: EHCI Host Controller [ 3.208074] usb usb4: Manufacturer: Linux 4.12.14-lp151.28.40-default ehci_hcd [ 3.208075] usb usb4: SerialNumber: ... [ 3.208272] hub 4-0:1.0: USB hub found [ 3.208348] hub 4-0:1.0: 6 ports detected [ 3.208986] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 3.208991] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 3.208996] uhci_hcd 0000:00:1a.2: detected 2 ports [ 3.209013] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00002160 [ 3.209074] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.209075] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.209076] usb usb5: Product: UHCI Host Controller [ 3.209077] usb usb5: Manufacturer: Linux 4.12.14-lp151.28.40-default uhci_hcd [ 3.209078] usb usb5: SerialNumber: ... [ 3.209164] hub 5-0:1.0: USB hub found [ 3.209171] hub 5-0:1.0: 2 ports detected [ 3.209383] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.209387] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 3.209391] uhci_hcd 0000:00:1d.0: detected 2 ports [ 3.209407] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002180 [ 3.209451] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.209453] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.209454] usb usb6: Product: UHCI Host Controller [ 3.209455] usb usb6: Manufacturer: Linux 4.12.14-lp151.28.40-default uhci_hcd [ 3.209456] usb usb6: SerialNumber: ... [ 3.209536] hub 6-0:1.0: USB hub found [ 3.209542] hub 6-0:1.0: 2 ports detected [ 3.209748] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.209751] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 3.209756] uhci_hcd 0000:00:1d.1: detected 2 ports [ 3.209772] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000021a0 [ 3.209819] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.209821] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.209822] usb usb7: Product: UHCI Host Controller [ 3.209823] usb usb7: Manufacturer: Linux 4.12.14-lp151.28.40-default uhci_hcd [ 3.209824] usb usb7: SerialNumber: ... [ 3.209906] hub 7-0:1.0: USB hub found [ 3.209912] hub 7-0:1.0: 2 ports detected [ 3.219133] ahci 0000:00:1f.2: version 3.0 [ 3.219397] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1f impl SATA mode [ 3.219399] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part sxs [ 3.225357] [drm] PCIE GART of 512M enabled (table at 0x0000000000142000). [ 3.225384] radeon 0000:01:00.0: WB enabled [ 3.225387] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801120a4c00 [ 3.225605] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xffffc900012121d0 [ 3.225607] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.225607] [drm] Driver supports precise vblank timestamp query. [ 3.225608] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 3.225633] radeon 0000:01:00.0: radeon: using MSI. [ 3.225647] [drm] radeon: irq initialized. [ 3.267865] scsi host2: ahci [ 3.288013] scsi host3: ahci [ 3.296015] [drm] ring test on 0 succeeded in 0 usecs [ 3.400012] scsi host4: ahci [ 3.412011] scsi host5: ahci [ 3.412202] scsi host6: ahci [ 3.424032] scsi host7: ahci [ 3.424072] ata3: SATA max UDMA/133 abar m2048@0xf0026000 port 0xf0026100 irq 28 [ 3.424074] ata4: SATA max UDMA/133 abar m2048@0xf0026000 port 0xf0026180 irq 28 [ 3.424075] ata5: SATA max UDMA/133 abar m2048@0xf0026000 port 0xf0026200 irq 28 [ 3.424077] ata6: SATA max UDMA/133 abar m2048@0xf0026000 port 0xf0026280 irq 28 [ 3.424078] ata7: SATA max UDMA/133 abar m2048@0xf0026000 port 0xf0026300 irq 28 [ 3.424079] ata8: DUMMY [ 3.424476] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.424481] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 3.424486] uhci_hcd 0000:00:1d.2: detected 2 ports [ 3.424504] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021c0 [ 3.424566] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.424567] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.424568] usb usb8: Product: UHCI Host Controller [ 3.424569] usb usb8: Manufacturer: Linux 4.12.14-lp151.28.40-default uhci_hcd [ 3.424571] usb usb8: SerialNumber: ... [ 3.424743] hub 8-0:1.0: USB hub found [ 3.424819] hub 8-0:1.0: 2 ports detected [ 3.470728] [drm] ring test on 5 succeeded in 1 usecs [ 3.470734] [drm] UVD initialized successfully. [ 3.470855] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.738249] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.738923] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.738925] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.744015] usb 4-5: new high-speed USB device number 2 using ehci-pci [ 3.754923] ata3.00: ACPI cmd c6/XX:XX:XX:XX:XX:XX (SET MULTIPLE MODE) succeeded [ 3.755054] ata3.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 3.755055] ata3.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.755057] ata3.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.755058] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.755665] ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA5KA, max UDMA/100 [ 3.755666] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.756355] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.756356] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.756481] ata3.00: ACPI cmd c6/XX:XX:XX:XX:XX:XX (SET MULTIPLE MODE) succeeded [ 3.756628] ata3.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 3.756630] ata3.00: ACPI cmd b1/XX:XX:XX:XX:XX:XX (DEVICE CONFIGURATION OVERLAY) filtered out [ 3.756631] ata3.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.756632] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.757239] ata3.00: configured for UDMA/100 [ 3.757363] scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72502 A5KA PQ: 0 ANSI: 5 [ 3.757660] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.757748] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 3.757760] sd 2:0:0:0: [sda] Write Protect is off [ 3.757761] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.757780] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.778238] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.779900] sda: sda1 sda2 [ 3.780333] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.781906] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.781907] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.781909] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.781910] ata4.00: ATAPI: HL-DT-ST DVD-RAM GH40L, RB02, max UDMA/100 [ 3.782226] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.783777] ata5.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.783778] ata5.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.783825] ata5.00: ACPI cmd c6/XX:XX:XX:XX:XX:XX (SET MULTIPLE MODE) succeeded [ 3.784030] ata5.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 3.784032] ata5.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.785657] ata5.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133 [ 3.785659] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.786390] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.786392] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.786393] ata4.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.786396] ata4.00: configured for UDMA/100 [ 3.787267] ata5.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.787269] ata5.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [ 3.787315] ata5.00: ACPI cmd c6/XX:XX:XX:XX:XX:XX (SET MULTIPLE MODE) succeeded [ 3.787530] ata5.00: ACPI cmd e3/XX:XX:XX:XX:XX:XX (IDLE) succeeded [ 3.787532] ata5.00: ACPI cmd f5/XX:XX:XX:XX:XX:XX (SECURITY FREEZE LOCK) filtered out [ 3.789150] ata5.00: configured for UDMA/133 [ 3.794943] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40L RB02 PQ: 0 ANSI: 5 [ 3.821676] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 3.821777] scsi 4:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5 [ 3.821910] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.821985] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.821995] sd 4:0:0:0: [sdb] Write Protect is off [ 3.821996] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.822014] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.830425] ata6: SATA link down (SStatus 0 SControl 300) [ 3.837391] sdb: sdb1 [ 3.837571] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.838260] ata7: SATA link down (SStatus 0 SControl 300) [ 3.891738] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.891741] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.891935] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.916018] usb 4-5: New USB device found, idVendor=148f, idProduct=5572 [ 3.916019] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.916021] usb 4-5: Product: 802.11 n WLAN [ 3.916022] usb 4-5: Manufacturer: Ralink [ 3.916023] usb 4-5: SerialNumber: ... [ 4.031164] random: crng init done [ 4.031166] random: 7 urandom warning(s) missed due to ratelimiting [ 4.084024] usb 2-2: new low-speed USB device number 2 using uhci_hcd [ 4.128047] [drm] ib test on ring 5 succeeded [ 4.128426] [drm] Radeon Display Connectors [ 4.128427] [drm] Connector 0: [ 4.128427] [drm] DP-1 [ 4.128428] [drm] HPD1 [ 4.128429] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 4.128429] [drm] Encoders: [ 4.128430] [drm] DFP1: INTERNAL_UNIPHY [ 4.128431] [drm] Connector 1: [ 4.128431] [drm] DP-2 [ 4.128431] [drm] HPD3 [ 4.128432] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 4.128433] [drm] Encoders: [ 4.128433] [drm] DFP2: INTERNAL_UNIPHY [ 4.128434] [drm] Connector 2: [ 4.128434] [drm] DVI-I-1 [ 4.128435] [drm] HPD2 [ 4.128436] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 4.128436] [drm] Encoders: [ 4.128437] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.128437] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 4.228012] usb 3-5: new high-speed USB device number 3 using ehci-pci [ 4.231699] radeon 0000:01:00.0: DVI-I-1: EDID is invalid: [ 4.231701] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 4.231701] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 4.231702] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 4.231703] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 4.231703] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 4.231704] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 4.231704] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 4.231705] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 4.232335] [drm] fb mappable at 0xE0243000 [ 4.232336] [drm] vram apper at 0xE0000000 [ 4.232337] [drm] size 3145728 [ 4.232337] [drm] fb depth is 24 [ 4.232338] [drm] pitch is 4096 [ 4.232463] fbcon: radeondrmfb (fb0) is primary device [ 4.262356] Console: switching to colour frame buffer device 128x48 [ 4.263754] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 4.276049] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 4.280406] usb 2-2: New USB device found, idVendor=046d, idProduct=c00e [ 4.280408] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.280409] usb 2-2: Product: USB-PS/2 Optical Mouse [ 4.280410] usb 2-2: Manufacturer: Logitech [ 4.299213] usbcore: registered new interface driver usbhid [ 4.299214] usbhid: USB HID core driver [ 4.299962] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/0003:046D:C00E.0001/input/input3 [ 4.301023] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2/input0 [ 4.384969] usb 3-5: New USB device found, idVendor=152d, idProduct=2338 [ 4.384972] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.384973] usb 3-5: Product: USB to ATA/ATAPI bridge [ 4.384974] usb 3-5: Manufacturer: JMicron [ 4.384975] usb 3-5: SerialNumber: ... [ 4.389139] usb-storage 3-5:1.0: USB Mass Storage device detected [ 4.389217] scsi host8: usb-storage 3-5:1.0 [ 4.389271] usbcore: registered new interface driver usb-storage [ 4.389711] usbcore: registered new interface driver uas [ 5.428379] scsi 8:0:0:0: Direct-Access ST500LM0 21-1KJ152 PQ: 0 ANSI: 5 [ 5.428582] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 5.429992] sd 8:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 5.431165] sd 8:0:0:0: [sdc] Write Protect is off [ 5.431166] sd 8:0:0:0: [sdc] Mode Sense: 28 00 00 00 [ 5.432100] sd 8:0:0:0: [sdc] No Caching mode page found [ 5.432103] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 5.485623] sdc: sdc1 sdc2 [ 5.488611] sd 8:0:0:0: [sdc] Attached SCSI disk [ 6.250299] PM: Starting manual resume from disk [ 6.250302] PM: Hibernation image partition 254:0 present [ 6.250302] PM: Looking for hibernation image. [ 6.250870] PM: Image not found (code -22) [ 6.250871] PM: Hibernation image not present or could not be loaded. [ 6.749316] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 7.382422] systemd-journald[140]: Received SIGTERM from PID 1 (systemd). [ 7.673143] systemd: 18 output lines suppressed due to ratelimiting [ 12.946003] EXT4-fs (dm-1): re-mounted. Opts: acl,user_xattr [ 13.595425] systemd-journald[556]: Received request to flush runtime journal from PID 1 [ 15.995177] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 15.995223] ACPI: Power Button [PBTN] [ 15.995261] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 15.995291] ACPI: Power Button [PWRF] [ 16.743895] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 16.859694] pps_core: LinuxPPS API ver. 1 registered [ 16.859696] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 17.175631] PTP clock support registered [ 17.480211] input: HP WMI hotkeys as /devices/virtual/input/input7 [ 17.551363] iTCO_vendor_support: vendor-support=0 [ 17.707382] gpio_ich: GPIO from 440 to 511 on gpio_ich [ 17.909605] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 17.909653] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 17.957954] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 17.957955] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 17.958240] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 18.152337] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 18.152339] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 18.152372] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF [ 18.353777] kvm: disabled by bios [ 18.382848] kvm: disabled by bios [ 18.657548] intel_powerclamp: No package C-state available [ 18.692403] intel_powerclamp: No package C-state available [ 19.153055] Adding 3964924k swap on /dev/mapper/XXXXXXXXXXXX Priority:-1 extents:1 across:3964924k FS [ 20.440985] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1884A: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 20.440987] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0) [ 20.440988] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 20.440989] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 20.440990] snd_hda_codec_analog hdaudioC0D0: inputs: [ 20.440992] snd_hda_codec_analog hdaudioC0D0: Mic=0x14 [ 20.440993] snd_hda_codec_analog hdaudioC0D0: Line=0x15 [ 20.450995] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 20.451048] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 20.451093] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 20.451137] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 20.451184] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.504023] usb 4-5: reset high-speed USB device number 2 using ehci-pci [ 20.675143] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected [ 20.703891] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected [ 20.876109] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 20.876375] usbcore: registered new interface driver rt2800usb [ 20.878120] rt2800usb 4-5:1.0 RETE_RITA: renamed from wlan0 [ 21.360160] loop: module loaded [ 22.332790] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 23.940789] SGI XFS with ACLs, security attributes, no debug enabled [ 23.950750] XFS (dm-2): Mounting V5 Filesystem [ 24.262760] XFS (dm-2): Ending clean mount [ 29.602960] vboxdrv: loading out-of-tree module taints kernel. [ 29.611050] vboxdrv: Found 2 processor cores [ 29.611226] vboxdrv: fAsync=0 offMin=0x299 offMax=0x9fb [ 29.711337] vboxdrv: TSC mode is Synchronous, tentative frequency 3158752019 Hz [ 29.711338] vboxdrv: Successfully loaded version 6.0.12_SUSE (interface 0x00290008) [ 31.223633] VBoxNetFlt: Successfully started. [ 31.776865] VBoxNetAdp: Successfully started. [ 31.826744] VBoxPciLinuxInit [ 31.826749] vboxpci: IOMMU not found (not registered) [ 40.034599] ip_tables: (C) 0DB3-0E5D Netfilter Core Team [ 40.264326] ip6_tables: (C) 0DB3-0E5D Netfilter Core Team [ 41.643695] Loading iSCSI transport class v2.0-870. [ 41.787509] Ebtables v2.0 registered [ 42.503723] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 43.506895] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 43.506952] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 43.532128] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 43.859675] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 44.595442] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 44.609846] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.820200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 44.820222] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 44.996918] Bridge firewalling registered [ 45.918331] Netfilter messages via NETLINK v0.30. [ 46.255979] ip_set: protocol 6 [ 46.356767] NET: Registered protocol family 17 [ 46.392634] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 55.182557] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 85.005364] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 85.844328] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 87.085790] fuse init (API version 7.26) [ 120.436251] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 240.452044] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 241.320351] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 282.608330] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 583.796174] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 792.536020] usb 3-3: new high-speed USB device number 4 using ehci-pci [ 792.693255] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860 [ 792.693257] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 792.693259] usb 3-3: Product: SAMSUNG_Android [ 792.693261] usb 3-3: Manufacturer: SAMSUNG [ 792.693263] usb 3-3: SerialNumber: ... [ 792.838602] cdc_acm 3-3:1.1: ttyACM0: USB ACM device [ 792.838821] usbcore: registered new interface driver cdc_acm [ 792.838821] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 858.533920] usb 3-3: USB disconnect, device number 4 [ 859.368015] usb 3-3: new high-speed USB device number 5 using ehci-pci [ 859.525012] usb 3-3: New USB device found, idVendor=04e8, idProduct=6860 [ 859.525014] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 859.525015] usb 3-3: Product: SAMSUNG_Android [ 859.525016] usb 3-3: Manufacturer: SAMSUNG [ 859.525017] usb 3-3: SerialNumber: ... [ 859.525963] cdc_acm 3-3:1.1: ttyACM0: USB ACM device [ 899.723332] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 906.244010] usb 4-6: new high-speed USB device number 3 using ehci-pci [ 906.401686] usb 4-6: New USB device found, idVendor=0480, idProduct=0901 [ 906.401687] usb 4-6: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 906.401689] usb 4-6: Product: External USB 3.0 [ 906.401690] usb 4-6: Manufacturer: TOSHIBA [ 906.401691] usb 4-6: SerialNumber: ... [ 906.401971] usb-storage 4-6:1.0: USB Mass Storage device detected [ 906.408109] scsi host9: usb-storage 4-6:1.0 [ 907.424832] scsi 9:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6 [ 907.425556] sd 9:0:0:0: Attached scsi generic sg4 type 0 [ 907.429699] sd 9:0:0:0: [sdd] Spinning up disk... [ 908.448013] ..ready [ 909.499450] sd 9:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 909.500697] sd 9:0:0:0: [sdd] Write Protect is off [ 909.500698] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 909.501819] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 909.511455] sdd: sdd1 sdd2 sdd3 sdd4 [ 909.515198] sd 9:0:0:0: [sdd] Attached SCSI disk [ 987.003002] perf: interrupt took too long (3145 > 3135), lowering kernel.perf_event_max_sample_rate to 63500 [ 1056.819066] perf: interrupt took too long (3942 > 3931), lowering kernel.perf_event_max_sample_rate to 50500 [ 1139.363448] IPv6: ADDRCONF(NETDEV_UP): RETE_RITA: link is not ready [ 1164.597454] RETE_RITA: authenticate with XX:XX:XX:XX:XX:XX [ 1164.690271] RETE_RITA: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1164.693678] RETE_RITA: authenticated [ 1164.696014] RETE_RITA: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1164.700246] RETE_RITA: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=4) [ 1164.710992] RETE_RITA: associated [ 1164.711045] IPv6: ADDRCONF(NETDEV_CHANGE): RETE_RITA: link becomes ready [ 1164.807888] RETE_RITA: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX