[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13 [ 0.000000] Linux version 5.4.0-47-generic (XXX@XXX) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #51-Ubuntu SMP Fri Sep 4 19:50:52 UTC 2020 (Ubuntu 5.4.0-47.51-generic 5.4.55) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-47-generic root=UUID=HASH_C3D-02FF-81B9-FED6-869CC91A8766 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9f28fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9f29000-0x00000000da534fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da535000-0x00000000da79afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da79b000-0x00000000da7a6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da7a7000-0x00000000da7b4fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da7b5000-0x00000000da7b9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da7ba000-0x00000000da7fcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da7fd000-0x00000000dae0ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dae10000-0x00000000daff2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daff3000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x0bdb7018-0x0bdc7057] usable ==> usable [ 0.000000] e820: update [mem 0x0bdb7018-0x0bdc7057] usable ==> usable [ 0.000000] e820: update [mem 0x0bdc8018-0x0bdd3057] usable ==> usable [ 0.000000] e820: update [mem 0x0bdc8018-0x0bdd3057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000bdb7017] usable [ 0.000000] reserve setup_data: [mem 0x000000000bdb7018-0x000000000bdc7057] usable [ 0.000000] reserve setup_data: [mem 0x000000000bdc7058-0x000000000bdc8017] usable [ 0.000000] reserve setup_data: [mem 0x000000000bdc8018-0x000000000bdd3057] usable [ 0.000000] reserve setup_data: [mem 0x000000000bdd3058-0x000000001fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x00000000d9f28fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d9f29000-0x00000000da534fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000da535000-0x00000000da79afff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000da79b000-0x00000000da7a6fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000da7a7000-0x00000000da7b4fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000da7b5000-0x00000000da7b9fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000da7ba000-0x00000000da7fcfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000da7fd000-0x00000000dae0ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dae10000-0x00000000daff2fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000daff3000-0x00000000daffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000011f5fffff] usable [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xda79b000 ACPI 2.0=0xda79b000 SMBIOS=0xf0480 MPS=0xfc910 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./, BIOS 4.6.5 06/29/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.351 MHz processor [ 0.001505] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001507] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001513] last_pfn = 0x11f600 max_arch_pfn = 0x400000000 [ 0.001516] MTRR default type: uncachable [ 0.001517] MTRR fixed ranges enabled: [ 0.001518] 00000-9FFFF write-back [ 0.001519] A0000-BFFFF uncachable [ 0.001519] C0000-CFFFF write-protect [ 0.001520] D0000-DFFFF uncachable [ 0.001520] E0000-FFFFF write-protect [ 0.001521] MTRR variable ranges enabled: [ 0.001522] 0 base 000000000 mask F00000000 write-back [ 0.001523] 1 base 100000000 mask FE0000000 write-back [ 0.001523] 2 base 0E0000000 mask FE0000000 uncachable [ 0.001524] 3 base 0DC000000 mask FFC000000 uncachable [ 0.001525] 4 base 0DB800000 mask FFF800000 uncachable [ 0.001525] 5 base 11F800000 mask FFF800000 uncachable [ 0.001526] 6 base 11F600000 mask FFFE00000 uncachable [ 0.001526] 7 disabled [ 0.001527] 8 disabled [ 0.001527] 9 disabled [ 0.001933] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002076] total RAM covered: 4014M [ 0.002304] Found optimal setting for mtrr clean up [ 0.002305] gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G [ 0.002632] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.002634] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.010456] found SMP MP-table at [mem 0x000fcc80-0x000fcc8f] [ 0.010488] check: Scanning 1 areas for low memory corruption [ 0.011485] secureboot: Secure boot disabled [ 0.011485] RAMDISK: [mem 0x3a554000-0x3d492fff] [ 0.011492] ACPI: Early table checksum verification disabled [ 0.011495] ACPI: RSDP 0x00000000DA79B000 000024 (v02 ALASKA) [ 0.011497] ACPI: XSDT 0x00000000DA79B070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.011502] ACPI: FACP 0x00000000DA7A5330 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.011507] ACPI: DSDT 0x00000000DA79B168 00A1C8 (v02 ALASKA A M I 00000013 INTL 20051117) [ 0.011509] ACPI: FACS 0x00000000DA7B3F80 000040 [ 0.011511] ACPI: APIC 0x00000000DA7A5428 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.011513] ACPI: ASF! 0x00000000DA7A54A0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.011515] ACPI: MCFG 0x00000000DA7A5548 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.011518] ACPI: HPET 0x00000000DA7A5588 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.011520] ACPI: SSDT 0x00000000DA7A55C0 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112) [ 0.011522] ACPI: SSDT 0x00000000DA7A5A20 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.011525] ACPI: BGRT 0x00000000DA7A64B8 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.011533] ACPI: Local APIC address 0xfee00000 [ 0.011603] No NUMA configuration found [ 0.011604] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff] [ 0.011612] NODE_DATA(0) allocated [mem 0x11f5d5000-0x11f5fffff] [ 0.011839] Zone ranges: [ 0.011840] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011841] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011841] Normal [mem 0x0000000100000000-0x000000011f5fffff] [ 0.011842] Device empty [ 0.011843] Movable zone start for each node [ 0.011845] Early memory node ranges [ 0.011846] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.011846] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.011847] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.011848] node 0: [mem 0x0000000040005000-0x00000000d9f28fff] [ 0.011848] node 0: [mem 0x00000000da7fd000-0x00000000dae0ffff] [ 0.011849] node 0: [mem 0x00000000daff3000-0x00000000daffffff] [ 0.011849] node 0: [mem 0x0000000100000000-0x000000011f5fffff] [ 0.012091] Zeroed struct page in unavailable ranges: 26394 pages [ 0.012093] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff] [ 0.012094] On node 0 totalpages: 1022182 [ 0.012095] DMA zone: 64 pages used for memmap [ 0.012095] DMA zone: 24 pages reserved [ 0.012096] DMA zone: 3998 pages, LIFO batch:0 [ 0.012147] DMA32 zone: 13902 pages used for memmap [ 0.012147] DMA32 zone: 889672 pages, LIFO batch:63 [ 0.024813] Normal zone: 2008 pages used for memmap [ 0.024814] Normal zone: 128512 pages, LIFO batch:31 [ 0.026534] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff] [ 0.026687] ACPI: PM-Timer IO Port: 0x408 [ 0.026689] ACPI: Local APIC address 0xfee00000 [ 0.026695] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.026706] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.026708] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.026710] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.026711] ACPI: IRQ0 used by override. [ 0.026711] ACPI: IRQ9 used by override. [ 0.026713] Using ACPI (MADT) for SMP configuration information [ 0.026714] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.026727] e820: update [mem 0x0bf81000-0x0c0e0fff] usable ==> reserved [ 0.026735] TSC deadline timer available [ 0.026736] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.026757] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.026759] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.026759] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.026761] PM: Registered nosave memory: [mem 0x0bdb7000-0x0bdb7fff] [ 0.026762] PM: Registered nosave memory: [mem 0x0bdc7000-0x0bdc7fff] [ 0.026762] PM: Registered nosave memory: [mem 0x0bdc8000-0x0bdc8fff] [ 0.026764] PM: Registered nosave memory: [mem 0x0bdd3000-0x0bdd3fff] [ 0.026765] PM: Registered nosave memory: [mem 0x0bf81000-0x0c0e0fff] [ 0.026767] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.026768] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.026769] PM: Registered nosave memory: [mem 0xd9f29000-0xda534fff] [ 0.026770] PM: Registered nosave memory: [mem 0xda535000-0xda79afff] [ 0.026770] PM: Registered nosave memory: [mem 0xda79b000-0xda7a6fff] [ 0.026770] PM: Registered nosave memory: [mem 0xda7a7000-0xda7b4fff] [ 0.026771] PM: Registered nosave memory: [mem 0xda7b5000-0xda7b9fff] [ 0.026771] PM: Registered nosave memory: [mem 0xda7ba000-0xda7fcfff] [ 0.026773] PM: Registered nosave memory: [mem 0xdae10000-0xdaff2fff] [ 0.026774] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.026774] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.026775] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.026775] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.026776] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.026776] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.026776] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.026777] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.026777] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.026778] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.026778] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.026779] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.026779] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.026779] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.026781] [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.026782] Booting paravirtualized kernel on bare hardware [ 0.026785] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.026791] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.027136] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.027141] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.027142] pcpu-alloc: [0] 0 1 2 3 [ 0.027168] Built 1 zonelists, mobility grouping on. Total pages: 1006184 [ 0.027169] Policy zone: Normal [ 0.027170] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-47-generic root=UUID=HASH_C3D-02FF-81B9-FED6-869CC91A8766 ro quiet splash vt.handoff=7 [ 0.027647] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.027855] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.027899] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.034539] Calgary: detecting Calgary via BIOS EBDA area [ 0.034541] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.050050] Memory: 3681188K/4088728K available (14339K kernel code, 2398K rwdata, 4956K rodata, 2716K init, 4988K bss, 407540K reserved, 0K cma-reserved) [ 0.050056] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0 [ 0.050173] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.050186] Kernel/User page tables isolation: enabled [ 0.050201] ftrace: allocating 44505 entries in 174 pages [ 0.063935] rcu: Hierarchical RCU implementation. [ 0.063937] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.063937] Tasks RCU enabled. [ 0.063938] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.063938] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.066587] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.066810] vt handoff: transparent VT on vt#7 [ 0.066816] Console: colour dummy device 80x25 [ 0.066820] printk: console [tty0] enabled [ 0.066836] ACPI: Core revision 20190816 [ 0.066919] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.066934] APIC: Switch to symmetric I/O mode setup [ 0.067332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086935] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f751300631, max_idle_ns: 440795335218 ns [ 0.086939] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.70 BogoMIPS (lpj=13169404) [ 0.086941] pid_max: default: 32768 minimum: 301 [ 0.096026] LSM: Security Framework initializing [ 0.096036] Yama: becoming mindful. [ 0.096068] AppArmor: AppArmor initialized [ 0.096109] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.096122] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.096138] *** VALIDATE tmpfs *** [ 0.096280] *** VALIDATE proc *** [ 0.096330] *** VALIDATE cgroup1 *** [ 0.096331] *** VALIDATE cgroup2 *** [ 0.096380] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.096387] process: using mwait in idle threads [ 0.096390] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.096391] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.096393] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.096395] Spectre V2 : Mitigation: Full generic retpoline [ 0.096395] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.096395] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.096396] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.096397] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.096398] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.096401] MDS: Mitigation: Clear CPU buffers [ 0.096543] Freeing SMP alternatives memory: 40K [ 0.099020] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.099105] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.099111] ... version: 3 [ 0.099111] ... bit width: 48 [ 0.099112] ... generic registers: 4 [ 0.099112] ... value mask: 0000ffffffffffff [ 0.099113] ... max period: 00007fffffffffff [ 0.099113] ... fixed-purpose events: 3 [ 0.099113] ... event mask: 000000070000000f [ 0.099147] rcu: Hierarchical SRCU implementation. [ 0.099864] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.099916] smp: Bringing up secondary CPUs ... [ 0.100000] x86: Booting SMP configuration: [ 0.100001] .... node #0, CPUs: #1 #2 [ 0.105282] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.105282] #3 [ 0.106989] smp: Brought up 1 node, 4 CPUs [ 0.106989] smpboot: Max logical packages: 1 [ 0.106989] smpboot: Total of 4 processors activated (26338.80 BogoMIPS) [ 0.108199] devtmpfs: initialized [ 0.108199] x86/mm: Memory block size: 128MB [ 0.108199] PM: Registering ACPI NVS region [mem 0xda535000-0xda79afff] (2514944 bytes) [ 0.108199] PM: Registering ACPI NVS region [mem 0xda7a7000-0xda7b4fff] (57344 bytes) [ 0.108199] PM: Registering ACPI NVS region [mem 0xda7ba000-0xda7fcfff] (274432 bytes) [ 0.108199] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.108199] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.108199] pinctrl core: initialized pinctrl subsystem [ 0.108199] PM: RTC time: 19:27:46, date: 2020-09-12 [ 0.108199] NET: Registered protocol family 16 [ 0.108199] EISA bus registered [ 0.108199] cpuidle: using governor ladder [ 0.108199] cpuidle: using governor menu [ 0.108199] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.108199] ACPI: bus type PCI registered [ 0.108199] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.108199] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.108199] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.108199] PCI: Using configuration type 1 for base access [ 0.108199] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.108199] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.108199] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.111006] ACPI: Added _OSI(Module Device) [ 0.111007] ACPI: Added _OSI(Processor Device) [ 0.111007] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.111008] ACPI: Added _OSI(Processor Aggregator Device) [ 0.111009] ACPI: Added _OSI(Linux-Dell-Video) [ 0.111009] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.111010] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.118452] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.119428] ACPI BIOS Error (bug): Could not resolve symbol [\_PR.CPU0._PPC], AE_NOT_FOUND (20190816/psargs-330) [ 0.119428] No Local Variables are initialized for Method [_PDC] [ 0.119428] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation) [ 0.119428] Arg0: (____ptrval____) <Obj> Buffer(12) 01 00 00 00 01 00 00 00 [ 0.119428] ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_NOT_FOUND) (20190816/psparse-529) [ 0.119428] ACPI: Dynamic OEM Table Load: [ 0.119428] ACPI: SSDT 0xFFFF9A82D9D78000 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.119972] ACPI: Interpreter enabled [ 0.119990] ACPI: (supports S0 S1 S4 S5) [ 0.119991] ACPI: Using IOAPIC for interrupt routing [ 0.120016] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.120338] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.126734] ACPI: Power Resource [FN00] (off) [ 0.126812] ACPI: Power Resource [FN01] (off) [ 0.126886] ACPI: Power Resource [FN02] (off) [ 0.126960] ACPI: Power Resource [FN03] (off) [ 0.127036] ACPI: Power Resource [FN04] (off) [ 0.127676] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.127681] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.127837] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.128439] PCI host bridge to bus 0000:00 [ 0.128440] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.128441] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.128442] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.128443] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.128444] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.128445] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.128445] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.128446] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.128447] pci_bus 0000:00: root bus resource [mem 0x11f600000-0x51f5fffff window] [ 0.128448] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.128456] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.128549] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.128557] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.128561] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.128564] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.128573] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.128679] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.128703] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit] [ 0.128775] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.128867] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.128888] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff] [ 0.128968] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.129061] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.129081] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.129147] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.129237] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.129330] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.129427] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.129519] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.129629] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.129650] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c06000-0xf7c063ff] [ 0.129730] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.129823] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.129961] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100 [ 0.130144] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f [ 0.130160] pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117] [ 0.130167] pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103] [ 0.130174] pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7] [ 0.130181] pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3] [ 0.130188] pci 0000:00:1f.2: reg 0x20: [io 0xf0d0-0xf0df] [ 0.130195] pci 0000:00:1f.2: reg 0x24: [io 0xf0c0-0xf0cf] [ 0.130303] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.130320] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit] [ 0.130340] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.130438] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185 [ 0.130454] pci 0000:00:1f.5: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.130461] pci 0000:00:1f.5: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.130468] pci 0000:00:1f.5: reg 0x18: [io 0xf090-0xf097] [ 0.130475] pci 0000:00:1f.5: reg 0x1c: [io 0xf080-0xf083] [ 0.130482] pci 0000:00:1f.5: reg 0x20: [io 0xf070-0xf07f] [ 0.130488] pci 0000:00:1f.5: reg 0x24: [io 0xf060-0xf06f] [ 0.130639] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.130711] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000 [ 0.130745] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.130777] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.130798] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.130914] pci 0000:02:00.0: supports D1 D2 [ 0.130915] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131044] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.131047] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.131054] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.131071] pci_bus 0000:03: extended config space not accessible [ 0.131118] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.131126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.131127] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.131129] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.131130] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) [ 0.131131] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) [ 0.131132] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) [ 0.131132] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) [ 0.131133] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode) [ 0.131134] pci 0000:00:1e.0: bridge window [mem 0x11f600000-0x51f5fffff window] (subtractive decode) [ 0.131666] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.131730] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *11 12 14 15) [ 0.131799] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *11 12 14 15) [ 0.131862] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 *10 11) [ 0.131923] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 11 12 14 15) *0, disabled. [ 0.131985] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 11 12 14 15) *0, disabled. [ 0.132047] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 11 12 14 15) [ 0.132108] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 11 12 14 15) [ 0.135010] iommu: Default domain type: Translated [ 0.135091] SCSI subsystem initialized [ 0.135102] libata version 3.00 loaded. [ 0.135102] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.135102] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.135102] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.135102] vgaarb: loaded [ 0.135102] ACPI: bus type USB registered [ 0.135102] usbcore: registered new interface driver usbfs [ 0.135102] usbcore: registered new interface driver hub [ 0.135102] usbcore: registered new device driver usb [ 0.135102] pps_core: LinuxPPS API ver. 1 registered [ 0.135102] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.135102] PTP clock support registered [ 0.135102] EDAC MC: Ver: 3.0.0 [ 0.135102] Registered efivars operations [ 0.135102] PCI: Using ACPI for IRQ routing [ 0.136424] PCI: pci_cache_line_size set to 64 bytes [ 0.136462] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.136463] e820: reserve RAM buffer [mem 0x0bdb7018-0x0bffffff] [ 0.136463] e820: reserve RAM buffer [mem 0x0bdc8018-0x0bffffff] [ 0.136464] e820: reserve RAM buffer [mem 0x0bf81000-0x0bffffff] [ 0.136465] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.136465] e820: reserve RAM buffer [mem 0xd9f29000-0xdbffffff] [ 0.136467] e820: reserve RAM buffer [mem 0xdae10000-0xdbffffff] [ 0.136467] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.136468] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff] [ 0.136554] NetLabel: Initializing [ 0.136555] NetLabel: domain hash size = 128 [ 0.136555] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.136566] NetLabel: unlabeled traffic allowed by default [ 0.136578] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.136578] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.139973] clocksource: Switched to clocksource tsc-early [ 0.149293] *** VALIDATE bpf *** [ 0.149370] VFS: Disk quotas dquot_6.6.0 [ 0.149386] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.149408] *** VALIDATE ramfs *** [ 0.149411] *** VALIDATE hugetlbfs *** [ 0.149477] AppArmor: AppArmor Filesystem Enabled [ 0.149500] pnp: PnP ACPI init [ 0.149620] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.149625] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.149711] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.149712] system 00:01: [io 0x0200-0x020f] has been reserved [ 0.149714] system 00:01: [io 0xffff] has been reserved [ 0.149715] system 00:01: [io 0xffff] has been reserved [ 0.149715] system 00:01: [io 0x0400-0x0453] has been reserved [ 0.149716] system 00:01: [io 0x0458-0x047f] has been reserved [ 0.149717] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.149718] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.149721] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.149742] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.149789] system 00:03: [io 0x0454-0x0457] has been reserved [ 0.149792] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.149881] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.149884] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150045] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.150048] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150288] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.150289] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.150290] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.150291] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.150292] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.150293] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.150294] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.150295] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.150296] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.150297] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.150298] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.150301] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150472] system 00:07: [mem 0x20000000-0x201fffff] has been reserved [ 0.150473] system 00:07: [mem 0x40004000-0x40004fff] has been reserved [ 0.150476] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.150496] pnp: PnP ACPI: found 8 devices [ 0.151690] thermal_sys: Registered thermal governor 'fair_share' [ 0.151691] thermal_sys: Registered thermal governor 'bang_bang' [ 0.151691] thermal_sys: Registered thermal governor 'step_wise' [ 0.151692] thermal_sys: Registered thermal governor 'user_space' [ 0.151693] thermal_sys: Registered thermal governor 'power_allocator' [ 0.156188] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.156216] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.156218] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.156220] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.156226] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff] [ 0.156230] pci 0000:00:1c.0: BAR 15: assigned [mem 0x11f600000-0x11f7fffff 64bit pref] [ 0.156232] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.156234] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.156237] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.156241] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff] [ 0.156245] pci 0000:00:1c.0: bridge window [mem 0x11f600000-0x11f7fffff 64bit pref] [ 0.156251] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.156253] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.156260] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.156265] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.156275] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.156276] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.156277] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.156278] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.156278] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.156279] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.156280] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.156281] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 0.156282] pci_bus 0000:00: resource 12 [mem 0x11f600000-0x51f5fffff window] [ 0.156283] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.156284] pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff] [ 0.156284] pci_bus 0000:01: resource 2 [mem 0x11f600000-0x11f7fffff 64bit pref] [ 0.156285] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.156286] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.156287] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.156288] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.156289] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.156290] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window] [ 0.156291] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window] [ 0.156292] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window] [ 0.156292] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window] [ 0.156293] pci_bus 0000:03: resource 11 [mem 0xdfa00000-0xfeafffff window] [ 0.156294] pci_bus 0000:03: resource 12 [mem 0x11f600000-0x51f5fffff window] [ 0.156401] NET: Registered protocol family 2 [ 0.156585] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.156615] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.156698] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.156792] TCP: Hash tables configured (established 32768 bind 32768) [ 0.156825] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.156839] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.156873] NET: Registered protocol family 1 [ 0.156878] NET: Registered protocol family 44 [ 0.156893] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling [ 0.156898] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.179075] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 21648 usecs [ 0.203064] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23412 usecs [ 0.203083] PCI: CLS 64 bytes, default 64 [ 0.203121] Trying to unpack rootfs image as initramfs... [ 0.313692] Initramfs unpacking failed: Decoding failed [ 0.319435] Freeing initrd memory: 48380K [ 0.319522] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.319523] software IO TLB: mapped [mem 0xd5f29000-0xd9f29000] (64MB) [ 0.319717] check: Scanning for low memory corruption every 60 seconds [ 0.320080] Initialise system trusted keyrings [ 0.320088] Key type blacklist registered [ 0.320116] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.321110] zbud: loaded [ 0.321401] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.321525] fuse: init (API version 7.31) [ 0.321538] *** VALIDATE fuse *** [ 0.321539] *** VALIDATE fuse *** [ 0.321617] Platform Keyring initialized [ 0.324650] Key type asymmetric registered [ 0.324651] Asymmetric key parser 'x509' registered [ 0.324660] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.324697] io scheduler mq-deadline registered [ 0.325164] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.325203] efifb: probing for efifb [ 0.325218] efifb: showing boot graphics [ 0.326179] efifb: framebuffer at 0xe0000000, using 1876k, total 1875k [ 0.326180] efifb: mode is 800x600x32, linelength=3200, pages=1 [ 0.326181] efifb: scrolling: redraw [ 0.326182] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.326222] fbcon: Deferring console take-over [ 0.326223] fb0: EFI VGA frame buffer device [ 0.326230] intel_idle: MWAIT substates: 0x1120 [ 0.326230] intel_idle: v0.4.1 model 0x3A [ 0.326343] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.326452] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.326483] ACPI: Power Button [PWRB] [ 0.326511] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.326530] ACPI: Power Button [PWRF] [ 0.327215] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.327216] ACPI: Thermal Zone [TZ00] (28 C) [ 0.327477] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.327478] ACPI: Thermal Zone [TZ01] (30 C) [ 0.327645] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.329283] Linux agpgart interface v0.103 [ 0.330909] loop: module loaded [ 0.331031] ata_piix 0000:00:1f.2: version 2.13 [ 0.331141] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.491420] scsi host0: ata_piix [ 0.491624] scsi host1: ata_piix [ 0.491666] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19 [ 0.491670] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19 [ 0.491782] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.650970] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 0.651281] scsi host2: ata_piix [ 0.651414] scsi host3: ata_piix [ 0.651451] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19 [ 0.651452] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19 [ 0.651519] libphy: Fixed MDIO Bus: probed [ 0.651520] tun: Universal TUN/TAP device driver, 1.6 [ 0.651555] PPP generic driver version 2.4.2 [ 0.651611] VFIO - User Level meta-driver version: 0.3 [ 0.651655] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.651661] ehci-pci: EHCI PCI platform driver [ 0.651767] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.651771] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.651782] ehci-pci 0000:00:1a.0: debug port 2 [ 0.655696] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.655705] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c07000 [ 0.670965] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.671039] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.671040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.671041] usb usb1: Product: EHCI Host Controller [ 0.671042] usb usb1: Manufacturer: Linux 5.4.0-47-generic ehci_hcd [ 0.671042] usb usb1: SerialNumber: ... [ 0.671179] hub 1-0:1.0: USB hub found [ 0.671186] hub 1-0:1.0: 2 ports detected [ 0.671429] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.671432] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.671442] ehci-pci 0000:00:1d.0: debug port 2 [ 0.675349] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.675357] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c06000 [ 0.690965] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.691030] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.691031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.691032] usb usb2: Product: EHCI Host Controller [ 0.691033] usb usb2: Manufacturer: Linux 5.4.0-47-generic ehci_hcd [ 0.691034] usb usb2: SerialNumber: ... [ 0.691191] hub 2-0:1.0: USB hub found [ 0.691197] hub 2-0:1.0: 2 ports detected [ 0.691321] ehci-platform: EHCI generic platform driver [ 0.691329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.691332] ohci-pci: OHCI PCI platform driver [ 0.691339] ohci-platform: OHCI generic platform driver [ 0.691343] uhci_hcd: USB Universal Host Controller Interface driver [ 0.691382] i8042: PNP: No PS/2 controller found. [ 0.691382] i8042: Probing ports directly. [ 1.346985] tsc: Refined TSC clocksource calibration: 3292.526 MHz [ 1.346991] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b8841aa, max_idle_ns: 440795368500 ns [ 1.728013] i8042: No controller found [ 1.728033] ata2.00: failed to resume link (SControl 30) [ 1.728107] mousedev: PS/2 mouse device common for all mice [ 1.728212] rtc_cmos 00:02: RTC can wake from S4 [ 1.728295] clocksource: Switched to clocksource tsc [ 1.728473] rtc_cmos 00:02: registered as rtc0 [ 1.728490] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.728496] i2c /dev entries driver [ 1.728531] device-mapper: uevent: version 1.0.3 [ 1.728598] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 1.728615] platform eisa.0: Probing EISA bus 0 [ 1.728617] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.728617] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.728618] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.728619] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.728620] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.728620] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.728621] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.728622] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.728623] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.728623] platform eisa.0: EISA: Detected 0 cards [ 1.728628] intel_pstate: Intel P-state driver initializing [ 1.728798] ledtrig-cpu: registered to indicate activity on CPUs [ 1.728800] EFI Variables Facility v0.08 2004-May-17 [ 1.782102] drop_monitor: Initializing network drop monitor service [ 1.782241] NET: Registered protocol family 10 [ 1.786952] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.786954] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.787511] Segment Routing with IPv6 [ 1.787532] NET: Registered protocol family 17 [ 1.787568] Key type dns_resolver registered [ 1.787766] RAS: Correctable Errors collector initialized. [ 1.787794] microcode: sig=0x306a9, pf=0x2, revision=0x21 [ 1.787828] microcode: Microcode Update Driver: v2.2. [ 1.787832] IPI shorthand broadcast: enabled [ 1.787840] sched_clock: Marking stable (1787659476, 165449)->(1794993368, -7168443) [ 1.787896] registered taskstats version 1 [ 1.787904] Loading compiled-in X.509 certificates [ 1.788555] Loaded X.509 cert 'Build time autogenerated kernel key: 52d16be8a47f13ed569e4734dd7da053d9d3759d' [ 1.788581] zswap: loaded using pool lzo/zbud [ 1.788638] Key type ._fscrypt registered [ 1.788639] Key type .fscrypt registered [ 1.793113] Key type big_key registered [ 1.795287] Key type encrypted registered [ 1.795291] AppArmor: AppArmor sha1 policy hashing enabled [ 1.816138] ima: No TPM chip found, activating TPM-bypass! [ 1.816145] ima: Allocated hash algorithm: sha1 [ 1.816151] ima: No architecture policies found [ 1.816159] evm: Initialising EVM extended attributes: [ 1.816160] evm: security.selinux [ 1.816160] evm: security.SMACK64 [ 1.816160] evm: security.SMACK64EXEC [ 1.816161] evm: security.SMACK64TRANSMUTE [ 1.816161] evm: security.SMACK64MMAP [ 1.816161] evm: security.apparmor [ 1.816162] evm: security.ima [ 1.816162] evm: security.capability [ 1.816163] evm: HMAC attrs: 0x1 [ 1.816481] PM: Magic number: 4:861:495 [ 1.816591] rtc_cmos 00:02: setting system clock to 2020-09-12T19:27:47 UTC (1599938867) [ 1.943320] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.943323] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.943444] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.943446] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.943573] hub 2-1:1.0: USB hub found [ 1.943711] hub 2-1:1.0: 8 ports detected [ 1.943770] hub 1-1:1.0: USB hub found [ 1.943950] hub 1-1:1.0: 6 ports detected [ 2.230966] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 2.340654] usb 1-1.1: New USB device found, idVendor=2001, idProduct=3310, bcdDevice= 0.00 [ 2.340655] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.340656] usb 1-1.1: Product: DWA-123 11n Adapter [ 2.340657] usb 1-1.1: Manufacturer: Realtek [ 2.340658] usb 1-1.1: SerialNumber: ... [ 2.418965] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 2.532549] usb 1-1.2: New USB device found, idVendor=04ca, idProduct=009b, bcdDevice= 3.25 [ 2.532550] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.532551] usb 1-1.2: Product: Wireless Device [ 2.532552] usb 1-1.2: Manufacturer: Lite-On Technology Corp. [ 2.558969] ata1.01: failed to resume link (SControl 0) [ 2.610965] usb 1-1.3: new high-speed USB device number 5 using ehci-pci [ 2.719033] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.719043] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2.721834] ata1.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133 [ 2.721835] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.726810] ata1.00: configured for UDMA/133 [ 2.727038] scsi 0:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5 [ 2.727340] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.727370] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.727372] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.727384] sd 0:0:0:0: [sda] Write Protect is off [ 2.727385] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.727396] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.735357] usb 1-1.3: New USB device found, idVendor=03f0, idProduct=8e07, bcdDevice= 0.15 [ 2.735361] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.735364] usb 1-1.3: Product: HP Webcam 3100 [ 2.735366] usb 1-1.3: Manufacturer: HP [ 2.763118] sda: sda1 sda2 [ 2.763861] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.766950] ata2.01: failed to resume link (SControl 0) [ 2.778457] ata2.00: SATA link down (SStatus 4 SControl 30) [ 2.778471] ata2.01: SATA link down (SStatus 0 SControl 0) [ 2.779450] Freeing unused decrypted memory: 2040K [ 2.779889] Freeing unused kernel image memory: 2716K [ 2.782971] Write protecting the kernel read-only data: 22528k [ 2.783476] Freeing unused kernel image memory: 2008K [ 2.783711] Freeing unused kernel image memory: 1188K [ 2.791952] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.791953] x86/mm: Checking user space page tables [ 2.800012] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.800014] Run /init as init process [ 2.893562] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-204) [ 2.893567] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.893569] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 2.893571] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.893572] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 2.893574] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.893574] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-204) [ 2.893576] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.893576] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.897560] hidraw: raw HID events driver (C) Jiri Kosina [ 2.897744] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.898320] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.901242] libphy: r8169: probed [ 2.902237] r8169 0000:02:00.0 eth0: RTL8105e, XX:XX:XX:XX:XX:XX, XID 40c, IRQ 26 [ 2.929601] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.936462] usbcore: registered new interface driver usbhid [ 2.936463] usbhid: USB HID core driver [ 2.939284] input: Lite-On Technology Corp. Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04CA:009B.0001/input/input2 [ 3.003214] hid-generic 0003:04CA:009B.0001: input,hidraw0: USB HID v1.11 Keyboard [Lite-On Technology Corp. Wireless Device] on usb-0000:00:1a.0-1.2/input0 [ 3.003439] input: Lite-On Technology Corp. Wireless Device Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04CA:009B.0002/input/input3 [ 3.003566] input: Lite-On Technology Corp. Wireless Device Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04CA:009B.0002/input/input4 [ 3.063121] input: Lite-On Technology Corp. Wireless Device System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04CA:009B.0002/input/input5 [ 3.063252] hid-generic 0003:04CA:009B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Lite-On Technology Corp. Wireless Device] on usb-0000:00:1a.0-1.2/input1 [ 3.257072] random: fast init done [ 3.338003] fbcon: Taking over console [ 3.338082] Console: switching to colour frame buffer device 100x37 [ 3.338137] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.338147] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.338231] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.436363] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.388116] systemd[1]: Inserted module 'autofs4' [ 4.700660] urandom_read: 3 callbacks suppressed [ 4.700661] random: systemd: uninitialized urandom read (16 bytes read) [ 4.722779] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.739096] systemd[1]: Detected architecture x86-64. [ 4.739145] random: systemd: uninitialized urandom read (16 bytes read) [ 4.739153] random: systemd: uninitialized urandom read (16 bytes read) [ 4.755837] systemd[1]: Set hostname to ... [ 5.944574] random: crng init done [ 5.944577] random: 1 urandom warning(s) missed due to ratelimiting [ 6.100660] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly. [ 6.455312] systemd[1]: Created slice system-modprobe.slice. [ 6.455508] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.455662] systemd[1]: Created slice User and Session Slice. [ 6.455714] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.455889] systemd[1]: Set up automount ... [ 6.455923] systemd[1]: Reached target User and Group Name Lookups. [ 6.455936] systemd[1]: Reached target Remote File Systems. [ 6.455944] systemd[1]: Reached target Slices. [ 6.456056] systemd[1]: Listening on Syslog Socket. [ 6.456134] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.456178] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.456331] systemd[1]: Listening on Journal Audit Socket. [ 6.456403] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.456490] systemd[1]: Listening on Journal Socket. [ 6.456570] systemd[1]: Listening on udev Control Socket. [ 6.456630] systemd[1]: Listening on udev Kernel Socket. [ 6.457401] systemd[1]: Mounting Huge Pages File System... [ 6.458223] systemd[1]: Mounting POSIX Message Queue File System... [ 6.459465] systemd[1]: Mounting Kernel Debug File System... [ 6.460304] systemd[1]: Mounting Kernel Trace File System... [ 6.461485] systemd[1]: Starting Journal Service... [ 6.462351] systemd[1]: Starting Set the console keyboard layout... [ 6.463370] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.464587] systemd[1]: Starting Load Kernel Module drm... [ 6.478094] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.478146] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.486480] systemd[1]: Starting Load Kernel Modules... [ 6.487538] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.488633] systemd[1]: Starting udev Coldplug all Devices... [ 6.489660] systemd[1]: Starting Uncomplicated firewall... [ 6.491448] systemd[1]: Mounted Huge Pages File System. [ 6.491564] systemd[1]: Mounted POSIX Message Queue File System. [ 6.491653] systemd[1]: Mounted Kernel Debug File System. [ 6.491744] systemd[1]: Mounted Kernel Trace File System. [ 6.492111] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.573600] systemd[1]: Finished Uncomplicated firewall. [ 6.690725] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.691968] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.692717] systemd[1]: Activating swap /swapfile... [ 6.814181] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 6.814243] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.815050] systemd[1]: Starting Load/Save Random Seed... [ 6.815771] systemd[1]: Starting Create System Users... [ 6.816114] systemd[1]: XXX@XXX: Succeeded. [ 6.816402] systemd[1]: Finished Load Kernel Module drm. [ 6.843844] systemd[1]: Started Journal Service. [ 6.892583] systemd-journald[270]: Received client request to flush runtime journal. [ 6.934535] lp: driver loaded but no devices found [ 6.946948] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 7.048662] ppdev: user-space parallel port driver [ 10.522669] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 10.522671] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 10.522672] RAPL PMU: hw unit of domain package 2^-16 Joules [ 10.522673] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 10.777519] cryptd: max_cpu_qlen set to 1000 [ 11.290794] checking generic (e0000000 1d5000) vs hw (e0000000 10000000) [ 11.290795] fb0: switching to inteldrmfb from EFI VGA [ 11.290874] Console: switching to colour dummy device 80x25 [ 11.290917] i915 0000:00:02.0: vgaarb: deactivate vga console [ 11.291500] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.291500] [drm] Driver supports precise vblank timestamp query. [ 11.292164] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 11.301342] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 11.301889] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.302079] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 11.418210] fbcon: i915drmfb (fb0) is primary device [ 11.418285] Console: switching to colour frame buffer device 240x67 [ 11.418316] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 11.901920] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.903037] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.008664] lib80211: common routines for IEEE802.11 drivers [ 12.008665] lib80211_crypt: registered algorithm 'NULL' [ 12.246719] mc: Linux media interface: v0.10 [ 12.397898] videodev: Linux video capture interface: v2.00 [ 12.574619] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 12.574867] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 12.581478] kvm: disabled by bios [ 12.628362] kvm: disabled by bios [ 12.640944] r8188eu: module is from the staging directory, the quality is unknown, you have been warned. [ 12.641956] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0) [ 12.672406] kvm: disabled by bios [ 12.675402] usbcore: registered new interface driver r8188eu [ 12.717034] kvm: disabled by bios [ 12.760655] r8188eu 1-1.1:1.0 wlxd8fee357618c: renamed from wlan0 [ 12.840933] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 12.840935] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.840936] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 12.840937] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 12.840937] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 12.840939] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 12.840940] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 12.840941] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 12.907466] intel_rapl_common: Found RAPL domain package [ 12.907468] intel_rapl_common: Found RAPL domain core [ 12.907469] intel_rapl_common: Found RAPL domain uncore [ 12.907473] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 12.910065] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 12.910137] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 12.910195] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 12.910251] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 12.910305] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 12.910360] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 13.015466] usb 1-1.3: current rate 32955 is different from the runtime rate 48000 [ 13.016943] usb 1-1.3: Warning! Unlikely big volume range (=7680), cval->res is probably wrong. [ 13.016945] usb 1-1.3: [5] FU [Mic Capture Volume] ch = 1, val = 512/8192/1 [ 13.017080] usbcore: registered new interface driver snd-usb-audio [ 13.017755] uvcvideo: Found UVC 1.00 device HP Webcam 3100 (03f0:8e07) [ 13.022249] uvcvideo 1-1.3:1.0: Entity type for entity Extension 5 was not initialized! [ 13.022251] uvcvideo 1-1.3:1.0: Entity type for entity Processing 4 was not initialized! [ 13.022252] uvcvideo 1-1.3:1.0: Entity type for entity Selector 3 was not initialized! [ 13.022253] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! [ 13.022331] input: HP Webcam 3100: HP Webcam 3100 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13 [ 13.022401] usbcore: registered new interface driver uvcvideo [ 13.022402] USB Video Class driver (1.1.1) [ 48.190987] ata1: lost interrupt (Status 0x50) [ 49.946974] ata1.01: failed to resume link (SControl 0) [ 50.107041] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 50.107053] ata1.01: SATA link down (SStatus 0 SControl 0) [ 50.133714] ata1.00: configured for UDMA/133 [ 50.133781] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 50.133783] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 50.133784] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 50.133786] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 68 ce 38 00 01 00 00 [ 50.133788] blk_update_request: I/O error, dev sda, sector 6868536 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0 [ 62.818466] RTL8208 Fast Ethernet r8169-200:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 63.093681] r8169 0000:02:00.0 enp2s0: Link is Down [ 64.713908] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control off [ 64.713920] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 71.934193] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 72.595588] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 72.932821] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 83.695929] rfkill: input handler disabled [ 117.822297] ata1: lost interrupt (Status 0x50) [ 119.574128] ata1.01: failed to resume link (SControl 0) [ 119.734174] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 119.734186] ata1.01: SATA link down (SStatus 0 SControl 0) [ 119.763045] ata1.00: configured for UDMA/133 [ 119.763058] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 119.763060] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 119.763061] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 119.763064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 6e 5f 50 00 01 00 00 [ 119.763065] blk_update_request: I/O error, dev sda, sector 7233360 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0 [ 128.233182] rfkill: input handler enabled [ 128.903324] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 129.204443] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 129.531940] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 160.829246] ata1: lost interrupt (Status 0x50) [ 162.581263] ata1.01: failed to resume link (SControl 0) [ 162.741320] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 162.741332] ata1.01: SATA link down (SStatus 0 SControl 0) [ 162.768072] ata1.00: configured for UDMA/133 [ 162.768090] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 162.768093] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 162.768096] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 162.768100] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 53 72 48 00 00 60 00 [ 162.768103] blk_update_request: I/O error, dev sda, sector 5468744 op 0x0:(READ) flags 0x80700 phys_seg 12 prio class 0 [ 166.849890] rfkill: input handler disabled [ 244.799283] ata1: lost interrupt (Status 0x50) [ 244.799302] ata1.00: limiting SATA link speed to 3.0 Gbps [ 246.551217] ata1.01: failed to resume link (SControl 0) [ 246.711300] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 246.711311] ata1.01: SATA link down (SStatus 0 SControl 0) [ 246.738026] ata1.00: configured for UDMA/133 [ 246.738045] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 246.738049] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 246.738051] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 246.738055] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 1f 9f b8 28 00 00 10 00 [ 246.738066] blk_update_request: I/O error, dev sda, sector 530561064 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 519.232465] ata1: lost interrupt (Status 0x50) [ 520.984473] ata1.01: failed to resume link (SControl 0) [ 521.144547] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 521.144558] ata1.01: SATA link down (SStatus 0 SControl 0) [ 521.171268] ata1.00: configured for UDMA/133 [ 521.171295] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 521.171298] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 521.171301] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 521.171313] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 21 d0 39 08 00 00 f8 00 [ 521.171315] blk_update_request: I/O error, dev sda, sector 567294216 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0 [ 1311.812992] ata1: lost interrupt (Status 0x50) [ 1313.564922] ata1.01: failed to resume link (SControl 0) [ 1313.724987] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 1313.724999] ata1.01: SATA link down (SStatus 0 SControl 0) [ 1313.753887] ata1.00: configured for UDMA/133 [ 1399.877407] ata1: lost interrupt (Status 0x50) [ 1401.629418] ata1.01: failed to resume link (SControl 0) [ 1401.789483] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 1401.789495] ata1.01: SATA link down (SStatus 0 SControl 0) [ 1401.836224] ata1.00: configured for UDMA/133 [ 1432.649660] ata1: lost interrupt (Status 0x50) [ 1434.401605] ata1.01: failed to resume link (SControl 0) [ 1434.561669] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 1434.561680] ata1.01: SATA link down (SStatus 0 SControl 0) [ 1434.588384] ata1.00: configured for UDMA/133 [ 1455.152256] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 1637.317683] r8169 0000:02:00.0 enp2s0: Link is Down [ 1653.874083] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control off [ 1763.502109] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 1765.419679] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 1773.426047] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 1795.178384] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 1798.549069] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 1831.230120] usb 1-1.3: current rate 17580 is different from the runtime rate 44100 [ 2014.280940] ata1: lost interrupt (Status 0x50) [ 2016.032883] ata1.01: failed to resume link (SControl 0) [ 2016.192947] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2016.192959] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2016.219613] ata1.00: configured for UDMA/133 [ 2016.219632] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2016.219635] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 2016.219638] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 2016.219642] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 5a f0 00 00 02 40 00 [ 2016.219646] blk_update_request: I/O error, dev sda, sector 5959680 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 0 [ 2051.145086] ata1: lost interrupt (Status 0x50) [ 2052.897090] ata1.01: failed to resume link (SControl 0) [ 2053.057156] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2053.057167] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2053.103846] ata1.00: configured for UDMA/133 [ 2053.103864] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2053.103875] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 2053.103876] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 2053.103878] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 03 7a 3b f8 00 00 98 00 [ 2053.103880] blk_update_request: I/O error, dev sda, sector 58342392 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0 [ 2671.656876] ata1: lost interrupt (Status 0x50) [ 2673.408816] ata1.01: failed to resume link (SControl 0) [ 2673.568876] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2673.568888] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2673.615548] ata1.00: configured for UDMA/133 [ 2728.999087] ata1: lost interrupt (Status 0x50) [ 2730.751031] ata1.01: failed to resume link (SControl 0) [ 2730.911094] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2730.911106] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2730.957795] ata1.00: configured for UDMA/133 [ 2730.957813] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2730.957816] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 2730.957819] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 2730.957832] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 1f d4 0a 70 00 00 08 00 [ 2730.957834] blk_update_request: I/O error, dev sda, sector 533990000 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 2765.862096] ata1: lost interrupt (Status 0x50) [ 2767.613977] ata1.01: failed to resume link (SControl 0) [ 2767.774014] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 2767.774025] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2767.800729] ata1.00: configured for UDMA/133 [ 2767.800746] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2767.800749] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 2767.800752] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 2767.800756] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 1f d4 34 00 00 00 08 00 [ 2767.800759] blk_update_request: I/O error, dev sda, sector 534000640 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 2804.772974] ata1: lost interrupt (Status 0x50) [ 2804.772997] ata1.00: limiting SATA link speed to 1.5 Gbps [ 2806.524922] ata1.01: failed to resume link (SControl 0) [ 2806.684993] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2806.685005] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2806.711734] ata1.00: configured for UDMA/133 [ 2847.567870] usb 2-1.6: new high-speed USB device number 3 using ehci-pci [ 2847.676967] usb 2-1.6: New USB device found, idVendor=14cd, idProduct=6116, bcdDevice= 2.20 [ 2847.676971] usb 2-1.6: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 2847.676973] usb 2-1.6: Product: USB Mass Storage Device [ 2847.676974] usb 2-1.6: Manufacturer: Generic [ 2847.676976] usb 2-1.6: SerialNumber: ... [ 2848.209206] usb 2-1.6: USB disconnect, device number 3 [ 2848.431857] usb 2-1.6: new high-speed USB device number 4 using ehci-pci [ 2849.111843] usb 2-1.6: device descriptor read/64, error -71 [ 2849.671822] usb 2-1.6: device descriptor read/64, error -71 [ 2849.859806] usb 2-1.6: new high-speed USB device number 5 using ehci-pci [ 2850.683784] usb 2-1.6: device descriptor read/64, error -71 [ 2851.667761] usb 2-1.6: device descriptor read/64, error -71 [ 2851.779811] usb 2-1-port6: attempt power cycle [ 2852.383757] usb 2-1.6: new high-speed USB device number 6 using ehci-pci [ 2852.483175] usb 2-1.6: device descriptor read/8, error -71 [ 2852.620176] usb 2-1.6: device descriptor read/8, error -71 [ 2853.019736] usb 2-1.6: new high-speed USB device number 7 using ehci-pci [ 2854.863908] usb 2-1.6: device descriptor read/8, error -71 [ 2855.004280] usb 2-1.6: device descriptor read/8, error -71 [ 2855.111833] usb 2-1-port6: unable to enumerate USB device [ 2855.335676] usb 2-1.6: new high-speed USB device number 8 using ehci-pci [ 2860.631555] usb 2-1.6: device descriptor read/64, error -110 [ 2863.539495] usb 2-1.6: device descriptor read/64, error -71 [ 2863.727498] usb 2-1.6: new high-speed USB device number 9 using ehci-pci [ 2864.283457] usb 2-1.6: device descriptor read/64, error -71 [ 2878.507131] ata1: lost interrupt (Status 0x50) [ 2879.831084] usb 2-1.6: device descriptor read/64, error -110 [ 2879.939216] usb 2-1-port6: attempt power cycle [ 2880.271073] ata1.01: failed to resume link (SControl 0) [ 2880.431130] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2880.431143] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2880.457932] ata1.00: configured for UDMA/133 [ 2880.547069] usb 2-1.6: new high-speed USB device number 10 using ehci-pci [ 2880.588393] usbcore: registered new interface driver usb-storage [ 2880.776334] usbcore: registered new interface driver uas [ 2885.642174] usb 2-1.6: device descriptor read/8, error -110 [ 2891.018119] usb 2-1.6: device descriptor read/8, error -110 [ 2891.202836] usb 2-1.6: new high-speed USB device number 11 using ehci-pci [ 2896.393930] usb 2-1.6: device descriptor read/8, error -110 [ 2899.044776] usb 2-1.6: device descriptor read/8, error -71 [ 2899.150816] usb 2-1-port6: unable to enumerate USB device [ 2899.374651] usb 2-1.6: new high-speed USB device number 12 using ehci-pci [ 2904.662535] usb 2-1.6: device descriptor read/64, error -110 [ 2909.194413] usb 2-1.6: device descriptor read/64, error -71 [ 2909.382423] usb 2-1.6: new high-speed USB device number 13 using ehci-pci [ 2914.650293] usb 2-1.6: device descriptor read/64, error -110 [ 2926.066058] usb 2-1.6: device descriptor read/64, error -71 [ 2926.174205] usb 2-1-port6: attempt power cycle [ 2926.778040] usb 2-1.6: new high-speed USB device number 14 using ehci-pci [ 2931.746010] ata1: lost interrupt (Status 0x50) [ 2931.977157] usb 2-1.6: device descriptor read/8, error -110 [ 2933.497901] ata1.01: failed to resume link (SControl 0) [ 2933.657971] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2933.657983] ata1.01: SATA link down (SStatus 0 SControl 0) [ 2933.704546] ata1.00: configured for UDMA/133 [ 2937.353095] usb 2-1.6: device descriptor read/8, error -110 [ 2937.541805] usb 2-1.6: new high-speed USB device number 15 using ehci-pci [ 2940.949412] usb 2-1.6: device descriptor read/8, error -71 [ 2941.086160] usb 2-1.6: device descriptor read/8, error -71 [ 2941.193816] usb 2-1-port6: unable to enumerate USB device [ 2941.417724] usb 2-1.6: new high-speed USB device number 16 using ehci-pci [ 2942.557699] usb 2-1.6: device descriptor read/64, error -71 [ 2949.861557] usb 2-1.6: device descriptor read/64, error -71 [ 2950.049542] usb 2-1.6: new high-speed USB device number 17 using ehci-pci [ 2955.349430] usb 2-1.6: device descriptor read/64, error -110 [ 2970.965108] usb 2-1.6: device descriptor read/64, error -110 [ 2971.073234] usb 2-1-port6: attempt power cycle [ 2971.677094] usb 2-1.6: new high-speed USB device number 18 using ehci-pci [ 2976.776345] usb 2-1.6: device descriptor read/8, error -110 [ 2982.152182] usb 2-1.6: device descriptor read/8, error -110 [ 2982.336878] usb 2-1.6: new high-speed USB device number 19 using ehci-pci [ 2987.528136] usb 2-1.6: device descriptor read/8, error -110 [ 2992.903951] usb 2-1.6: device descriptor read/8, error -110 [ 2993.008790] usb 2-1-port6: unable to enumerate USB device [ 2993.284667] usb 2-1.6: new high-speed USB device number 20 using ehci-pci [ 2998.612556] usb 2-1.6: device descriptor read/64, error -110 [ 3003.480463] usb 2-1.6: device descriptor read/64, error -71 [ 3003.668470] usb 2-1.6: new high-speed USB device number 21 using ehci-pci [ 3004.184444] usb 2-1.6: device descriptor read/64, error -71 [ 3004.604438] usb 2-1.6: device descriptor read/64, error -71 [ 3004.712517] usb 2-1-port6: attempt power cycle [ 3012.400290] usb 2-1.5: new high-speed USB device number 23 using ehci-pci [ 3012.509854] usb 2-1.5: New USB device found, idVendor=14cd, idProduct=6116, bcdDevice= 2.20 [ 3012.509858] usb 2-1.5: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 3012.509860] usb 2-1.5: Product: USB Mass Storage Device [ 3012.509862] usb 2-1.5: Manufacturer: Generic [ 3012.509863] usb 2-1.5: SerialNumber: ... [ 3012.510228] usb-storage 2-1.5:1.0: USB Mass Storage device detected [ 3012.511480] scsi host4: usb-storage 2-1.5:1.0 [ 3013.541317] scsi 4:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 [ 3013.541608] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3013.542212] sd 4:0:0:0: [sdb] 1953525166 512-byte logical blocks: (1.00 TB/932 GiB) [ 3013.542786] sd 4:0:0:0: [sdb] Write Protect is off [ 3013.542787] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3013.543557] sd 4:0:0:0: [sdb] No Caching mode page found [ 3013.543564] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 3013.586935] sdb: sdb1 sdb2 sdb3 [ 3013.589289] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3069.585705] usb 2-1.5: USB disconnect, device number 23 [ 3069.839226] usb 2-1.5: new high-speed USB device number 24 using ehci-pci [ 3209.120983] usb 2-1.5: new high-speed USB device number 25 using ehci-pci [ 3209.230404] usb 2-1.5: New USB device found, idVendor=14cd, idProduct=6116, bcdDevice= 2.20 [ 3209.230407] usb 2-1.5: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 3209.230409] usb 2-1.5: Product: USB Mass Storage Device [ 3209.230411] usb 2-1.5: Manufacturer: Generic [ 3209.230412] usb 2-1.5: SerialNumber: ... [ 3209.230770] usb-storage 2-1.5:1.0: USB Mass Storage device detected [ 3209.231637] scsi host4: usb-storage 2-1.5:1.0 [ 3210.241968] scsi 4:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 [ 3210.242220] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3210.242962] sd 4:0:0:0: [sdb] 1953525166 512-byte logical blocks: (1.00 TB/932 GiB) [ 3210.243584] sd 4:0:0:0: [sdb] Write Protect is off [ 3210.243586] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 3210.244214] sd 4:0:0:0: [sdb] No Caching mode page found [ 3210.244217] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 3210.282440] sdb: sdb1 sdb2 sdb3 [ 3210.284588] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3264.649017] usb 2-1.5: USB disconnect, device number 25 [ 3264.675309] Buffer I/O error on dev sdb3, logical block 8429990, async page read [ 3264.675638] Buffer I/O error on dev sdb3, logical block 8429990, async page read [ 3394.586614] ata1: lost interrupt (Status 0x50) [ 3396.338526] ata1.01: failed to resume link (SControl 0) [ 3396.498573] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3396.498586] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3396.527422] ata1.00: configured for UDMA/133 [ 3396.527442] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3396.527445] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 3396.527448] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 3396.527451] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 03 85 15 c0 00 00 08 00 [ 3396.527463] blk_update_request: I/O error, dev sda, sector 59053504 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 3427.366168] ata1: lost interrupt (Status 0x50) [ 3427.366195] ata1.00: limiting speed to UDMA/100:PIO4 [ 3429.118153] ata1.01: failed to resume link (SControl 0) [ 3429.278228] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3429.278240] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3429.305006] ata1.00: configured for UDMA/100 [ 3429.305020] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3429.305022] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 3429.305023] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 3429.305026] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 1e 33 05 00 00 00 e0 00 [ 3429.305028] blk_update_request: I/O error, dev sda, sector 506660096 op 0x0:(READ) flags 0x80700 phys_seg 14 prio class 0 [ 3466.265749] ata1: lost interrupt (Status 0x50) [ 3468.017723] ata1.01: failed to resume link (SControl 0) [ 3468.177787] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3468.177799] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3468.206640] ata1.00: configured for UDMA/100 [ 3607.576380] ata1: lost interrupt (Status 0x50) [ 3609.332295] ata1.01: failed to resume link (SControl 0) [ 3609.492358] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3609.492370] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3609.521180] ata1.00: configured for UDMA/100 [ 3609.521199] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3609.521202] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 3609.521205] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 3609.521208] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 20 d4 cf c8 00 00 10 00 [ 3609.521212] blk_update_request: I/O error, dev sda, sector 550817736 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0 [ 3787.798734] ata1: lost interrupt (Status 0x50) [ 3789.550719] ata1.01: failed to resume link (SControl 0) [ 3789.710782] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3789.710794] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3789.737515] ata1.00: configured for UDMA/100 [ 3789.737538] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3789.737542] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 3789.737544] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 3789.737556] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 2a d0 0f 00 00 01 00 00 [ 3789.737559] blk_update_request: I/O error, dev sda, sector 718278400 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0 [ 3859.478173] ata1: lost interrupt (Status 0x50) [ 3859.478197] ata1.00: limiting speed to UDMA/33:PIO4 [ 3861.230142] ata1.01: failed to resume link (SControl 0) [ 3861.390222] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3861.390235] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3861.416870] ata1.00: configured for UDMA/33 [ 3906.581809] ata1: lost interrupt (Status 0x50) [ 3908.333791] ata1.01: failed to resume link (SControl 0) [ 3908.493859] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3908.493870] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3908.520569] ata1.00: configured for UDMA/33 [ 3943.445600] ata1: lost interrupt (Status 0x50) [ 3945.197519] ata1.01: failed to resume link (SControl 0) [ 3945.357584] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3945.357596] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3945.404333] ata1.00: configured for UDMA/33 [ 3945.404344] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3945.404346] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 3945.404347] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 3945.404349] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 25 14 22 78 00 00 08 00 [ 3945.404351] blk_update_request: I/O error, dev sda, sector 622076536 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 3988.501206] ata1: lost interrupt (Status 0x50) [ 3990.253195] ata1.01: failed to resume link (SControl 0) [ 3990.413262] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3990.413274] ata1.01: SATA link down (SStatus 0 SControl 0) [ 3990.459939] ata1.00: configured for UDMA/33 [ 4027.413002] ata1: lost interrupt (Status 0x50) [ 4029.164920] ata1.01: failed to resume link (SControl 0) [ 4029.324985] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4029.324997] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4029.353891] ata1.00: configured for UDMA/33 [ 4064.276769] ata1: lost interrupt (Status 0x50) [ 4066.028671] ata1.01: failed to resume link (SControl 0) [ 4066.188731] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4066.188742] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4066.215393] ata1.00: configured for UDMA/33 [ 4066.215407] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4066.215409] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 4066.215416] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 4066.215418] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 21 d9 2e 78 00 00 08 00 [ 4066.215420] blk_update_request: I/O error, dev sda, sector 567881336 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 4115.476335] ata1: lost interrupt (Status 0x50) [ 4117.228324] ata1.01: failed to resume link (SControl 0) [ 4117.392385] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4117.392396] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4117.419008] ata1.00: configured for UDMA/33 [ 4148.231789] ata1: lost interrupt (Status 0x50) [ 4149.983661] ata1.01: failed to resume link (SControl 0) [ 4150.143709] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4150.143721] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4150.170421] ata1.00: configured for UDMA/33 [ 4187.153489] ata1: lost interrupt (Status 0x50) [ 4188.905385] ata1.01: failed to resume link (SControl 0) [ 4189.065456] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4189.065469] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4189.092221] ata1.00: configured for UDMA/33 [ 4221.967543] ata1: lost interrupt (Status 0x50) [ 4223.723446] ata1.01: failed to resume link (SControl 0) [ 4223.883503] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4223.883515] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4223.930209] ata1.00: configured for UDMA/33 [ 4254.733804] ata1: lost interrupt (Status 0x50) [ 4256.485709] ata1.01: failed to resume link (SControl 0) [ 4256.645764] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4256.645776] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4256.674660] ata1.00: configured for UDMA/33 [ 4326.410352] ata1: lost interrupt (Status 0x50) [ 4328.162205] ata1.01: failed to resume link (SControl 0) [ 4328.322260] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4328.322272] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4328.369009] ata1.00: configured for UDMA/33 [ 4365.320597] ata1: lost interrupt (Status 0x50) [ 4367.072448] ata1.01: failed to resume link (SControl 0) [ 4367.232510] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4367.232522] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4367.279287] ata1.00: configured for UDMA/33 [ 4404.230870] ata1: lost interrupt (Status 0x50) [ 4405.982797] ata1.01: failed to resume link (SControl 0) [ 4406.142870] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4406.142883] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4406.189582] ata1.00: configured for UDMA/33 [ 4418.406289] ata1.01: failed to resume link (SControl 0) [ 4418.566345] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4418.566357] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4418.574137] ata1.00: configured for UDMA/33 [ 4606.975593] ata1: lost interrupt (Status 0x50) [ 4608.727472] ata1.01: failed to resume link (SControl 0) [ 4608.887529] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4608.887541] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4608.911972] ata1.00: configured for UDMA/33 [ 4608.911992] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4608.911995] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 4608.911998] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 4608.912002] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 df 43 28 00 00 80 00 [ 4608.912013] blk_update_request: I/O error, dev sda, sector 14631720 op 0x0:(READ) flags 0x80700 phys_seg 16 prio class 0 [ 4641.790517] ata1: lost interrupt (Status 0x50) [ 4643.542393] ata1.01: failed to resume link (SControl 0) [ 4643.702454] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4643.702466] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4643.731256] ata1.00: configured for UDMA/33 [ 4643.731269] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4643.731271] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 4643.731272] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 4643.731274] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 1e 30 27 28 00 01 00 00 [ 4643.731277] blk_update_request: I/O error, dev sda, sector 506472232 op 0x0:(READ) flags 0x80700 phys_seg 16 prio class 0 [ 4721.660140] ata1: lost interrupt (Status 0x50) [ 4723.412094] ata1.01: failed to resume link (SControl 0) [ 4723.572153] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4723.572166] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4723.618940] ata1.00: configured for UDMA/33 [ 4809.721901] ata1: lost interrupt (Status 0x50) [ 4811.473783] ata1.01: failed to resume link (SControl 0) [ 4811.633849] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4811.633861] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4811.662708] ata1.00: configured for UDMA/33 [ 4811.662727] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4811.662730] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 4811.662733] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 4811.662745] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 1e 30 6f 10 00 00 10 00 [ 4811.662748] blk_update_request: I/O error, dev sda, sector 506490640 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0 [ 4920.311225] ata1: lost interrupt (Status 0x50) [ 4922.063188] ata1.01: failed to resume link (SControl 0) [ 4922.223247] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4922.223259] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4922.252150] ata1.00: configured for UDMA/33 [ 4959.222440] ata1: lost interrupt (Status 0x50) [ 4960.974333] ata1.01: failed to resume link (SControl 0) [ 4961.134396] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4961.134408] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4961.161125] ata1.00: configured for UDMA/33 [ 4991.989659] ata1: lost interrupt (Status 0x50) [ 4993.741619] ata1.01: failed to resume link (SControl 0) [ 4993.901675] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 4993.901687] ata1.01: SATA link down (SStatus 0 SControl 0) [ 4993.926078] ata1.00: configured for UDMA/33 [ 4993.926093] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 4993.926096] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 4993.926098] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 4993.926102] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 57 94 0b f8 00 00 08 00 [ 4993.926104] blk_update_request: I/O error, dev sda, sector 1469320184 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 5057.524347] ata1: lost interrupt (Status 0x50) [ 5059.280315] ata1.01: failed to resume link (SControl 0) [ 5059.440394] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5059.440406] ata1.01: SATA link down (SStatus 0 SControl 0) [ 5059.487179] ata1.00: configured for UDMA/33 [ 5096.443586] ata1: lost interrupt (Status 0x50) [ 5098.199547] ata1.01: failed to resume link (SControl 0) [ 5098.359631] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5098.359643] ata1.01: SATA link down (SStatus 0 SControl 0) [ 5098.404034] ata1.00: configured for UDMA/33 [ 5098.404047] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 5098.404048] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 5098.404050] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 5098.404052] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 9f 90 00 00 00 08 00 [ 5098.404054] blk_update_request: I/O error, dev sda, sector 10457088 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 5137.394828] ata1: lost interrupt (Status 0x50) [ 5139.146790] ata1.01: failed to resume link (SControl 0) [ 5139.306865] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5139.306877] ata1.01: SATA link down (SStatus 0 SControl 0) [ 5139.335721] ata1.00: configured for UDMA/33 [ 5176.306117] ata1: lost interrupt (Status 0x50) [ 5178.058084] ata1.01: failed to resume link (SControl 0) [ 5178.218143] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5178.218155] ata1.01: SATA link down (SStatus 0 SControl 0) [ 5178.247012] ata1.00: configured for UDMA/33 [ 5211.121568] ata1: lost interrupt (Status 0x50) [ 5212.889456] ata1.01: failed to resume link (SControl 0) [ 5213.049527] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5213.049539] ata1.01: SATA link down (SStatus 0 SControl 0) [ 5213.096235] ata1.00: configured for UDMA/33 [ 5213.096248] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 5213.096250] sd 0:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] [ 5213.096252] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 5213.096254] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 02 55 5b 40 00 00 80 00 [ 5213.096256] blk_update_request: I/O error, dev sda, sector 39148352 op 0x0:(READ) flags 0x80700 phys_seg 15 prio class 0 [ 5242.668529] r8169 0000:02:00.0: invalid short VPD tag 00 at offset 1