Probe #a4356f45fe of libre-computer aml-s905x-cc
Log: dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.46-08797-g9c18484153bc (XXX@XXX) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP PREEMPT_DYNAMIC Thu Aug 17 01:39:41 PDT 2023
[ 0.000000] Machine model: Libre Computer AML-S905X-CC
[ 0.000000] efi: EFI v2.100 by Das U-Boot
[ 0.000000] efi: RTPROP=0x74e90040 SMBIOS=0x74e8f000 RNG=0x6c74a040 MEMRESERVE=0x6c749040
[ 0.000000] random: crng init done
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000059800000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000052fffff]
[ 0.000000] node 0: [mem 0x0000000005300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x0000000074e8efff]
[ 0.000000] node 0: [mem 0x0000000074e8f000-0x0000000074e90fff]
[ 0.000000] node 0: [mem 0x0000000074e91000-0x0000000074e91fff]
[ 0.000000] node 0: [mem 0x0000000074e92000-0x0000000074e97fff]
[ 0.000000] node 0: [mem 0x0000000074e98000-0x000000007deaffff]
[ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff]
[ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007fe5afff]
[ 0.000000] node 0: [mem 0x000000007fe5b000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 29 pages/cpu s80744 r8192 d29848 u118784
[ 0.000000] pcpu-alloc: s80744 r8192 d29848 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.46-08797-g9c18484153bc root=UUID=HASH_706-8DAD-8517-61F3-258E17CB8C52 ro noquiet splash vt.handoff=7
[ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.1.46-08797-g9c18484153bc", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1667212K/2097152K available (18752K kernel code, 3570K rwdata, 14160K rodata, 7488K init, 804K bss, 167796K reserved, 262144K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 59203 entries in 232 pages
[ 0.000000] ftrace: allocated 232 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] Dynamic Preempt: full
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000607] Console: colour dummy device 80x25
[ 0.001115] printk: console [tty0] enabled
[ 0.001154] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.001178] pid_max: default: 32768 minimum: 301
[ 0.001267] LSM: Security Framework initializing
[ 0.001293] Yama: becoming mindful.
[ 0.001403] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001430] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002786] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.002822] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.002895] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.002911] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.002987] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.003002] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.003181] rcu: Hierarchical SRCU implementation.
[ 0.003195] rcu: Max phase no-delay instances is 1000.
[ 0.004404] Remapping and enabling EFI services.
[ 0.004775] smp: Bringing up secondary CPUs ...
[ 0.005585] Detected VIPT I-cache on CPU1
[ 0.005725] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.006582] Detected VIPT I-cache on CPU2
[ 0.006716] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.007578] Detected VIPT I-cache on CPU3
[ 0.007707] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.007801] smp: Brought up 1 node, 4 CPUs
[ 0.007869] SMP: Total of 4 processors activated.
[ 0.007881] CPU features: detected: 32-bit EL0 Support
[ 0.007890] CPU features: detected: 32-bit EL1 Support
[ 0.007903] CPU features: detected: CRC32 instructions
[ 0.007980] CPU: All CPU(s) started at EL2
[ 0.007999] alternatives: applying system-wide alternatives
[ 0.009916] devtmpfs: initialized
[ 0.016008] Registered cp15_barrier emulation handler
[ 0.016047] Registered setend emulation handler
[ 0.016267] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.016297] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.022483] pinctrl core: initialized pinctrl subsystem
[ 0.022760] regulator-dummy: no parameters, enabled
[ 0.023044] SMBIOS 3.0 present.
[ 0.023076] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2023.07+ 07/01/2023
[ 0.023502] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.024663] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.025065] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.025272] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.026877] thermal_sys: Registered thermal governor 'fair_share'
[ 0.026892] thermal_sys: Registered thermal governor 'step_wise'
[ 0.026913] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.026999] cpuidle: using governor menu
[ 0.027157] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.027279] ASID allocator initialised with 32768 entries
[ 0.039290] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
[ 0.040619] platform d0100000.vpu: Fixed dependency cycle(s) with /cvbs-connector
[ 0.040974] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /hdmi-connector
[ 0.042949] KASLR enabled
[ 0.050269] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.050302] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.050316] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.050328] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.050340] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.050352] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.050364] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.050375] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.117087] raid6: neonx8 gen() 2140 MB/s
[ 0.185157] raid6: neonx4 gen() 2187 MB/s
[ 0.253213] raid6: neonx2 gen() 2087 MB/s
[ 0.321268] raid6: neonx1 gen() 1783 MB/s
[ 0.389328] raid6: int64x8 gen() 1367 MB/s
[ 0.457381] raid6: int64x4 gen() 1604 MB/s
[ 0.525439] raid6: int64x2 gen() 1402 MB/s
[ 0.593488] raid6: int64x1 gen() 1036 MB/s
[ 0.593502] raid6: using algorithm neonx4 gen() 2187 MB/s
[ 0.661542] raid6: .... xor() 1556 MB/s, rmw enabled
[ 0.661555] raid6: using neon recovery algorithm
[ 0.661822] fbcon: Taking over console
[ 0.662183] VCC_3V3: 3300 mV, enabled
[ 0.662308] reg-fixed-voltage regulator-vcc_3v3: VCC_3V3 supplying 3300000uV
[ 0.662430] VDDIO_AO18: 1800 mV, enabled
[ 0.662546] reg-fixed-voltage regulator-vddio_ao18: VDDIO_AO18 supplying 1800000uV
[ 0.662643] VDDIO_BOOT: will resolve supply early: vin
[ 0.662650] reg-fixed-voltage regulator-vddio_boot: Looking up vin-supply from device tree
[ 0.662662] VDDIO_BOOT: supplied by VCC_3V3
[ 0.662669] VCC_3V3: could not add device link regulator.3: -ENOENT
[ 0.662707] VDDIO_BOOT: 1800 mV, enabled
[ 0.662805] reg-fixed-voltage regulator-vddio_boot: VDDIO_BOOT supplying 1800000uV
[ 0.663279] iommu: Default domain type: Passthrough
[ 0.663645] SCSI subsystem initialized
[ 0.663828] libata version 3.00 loaded.
[ 0.664036] usbcore: registered new interface driver usbfs
[ 0.664089] usbcore: registered new interface driver hub
[ 0.664128] usbcore: registered new device driver usb
[ 0.664566] pps_core: LinuxPPS API ver. 1 registered
[ 0.664581] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX>
[ 0.664606] PTP clock support registered
[ 0.664732] EDAC MC: Ver: 3.0.0
[ 0.665417] Registered efivars operations
[ 0.665957] FPGA manager framework
[ 0.666072] Advanced Linux Sound Architecture Driver Initialized.
[ 0.666706] NetLabel: Initializing
[ 0.666724] NetLabel: domain hash size = 128
[ 0.666734] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.666798] NetLabel: unlabeled traffic allowed by default
[ 0.667202] clocksource: Switched to clocksource arch_sys_counter
[ 0.667580] VFS: Disk quotas dquot_6.6.0
[ 0.667645] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.667781] FS-Cache: Loaded
[ 0.672990] NET: Registered PF_INET protocol family
[ 0.673162] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.674830] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.674882] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.674906] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.675027] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.675448] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.675709] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.675800] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.675854] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.676031] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.679830] RPC: Registered named UNIX socket transport module.
[ 0.679866] RPC: Registered udp transport module.
[ 0.679876] RPC: Registered tcp transport module.
[ 0.679886] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.679905] NET: Registered PF_XDP protocol family
[ 0.679928] PCI: CLS 0 bytes, default 64
[ 0.680408] Trying to unpack rootfs image as initramfs...
[ 0.687303] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.687873] kvm [1]: IPA Size Limit: 40 bits
[ 0.690575] kvm [1]: vgic interrupt IRQ9
[ 0.690714] kvm [1]: Hyp mode initialized successfully
[ 1.159257] Initialise system trusted keyrings
[ 1.159609] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.166297] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.167182] NFS: Registering the id_resolver key type
[ 1.167264] Key type id_resolver registered
[ 1.167275] Key type id_legacy registered
[ 1.167388] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.167408] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.168341] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 1.169795] 9p: Installing v9fs 9p2000 file system support
[ 1.207250] xor: measuring software checksum speed
[ 1.211224] 8regs : 2520 MB/sec
[ 1.215156] 32regs : 2521 MB/sec
[ 1.219489] arm64_neon : 2311 MB/sec
[ 1.219519] xor: using function: 32regs (2521 MB/sec)
[ 1.219541] Key type asymmetric registered
[ 1.219560] Asymmetric key parser 'x509' registered
[ 1.282650] Freeing initrd memory: 58856K
[ 1.297681] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 1.297801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.297967] io scheduler mq-deadline registered
[ 1.297984] io scheduler kyber registered
[ 1.298125] io scheduler bfq registered
[ 1.298906] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 1.315667] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
[ 1.320152] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.329354] loop: module loaded
[ 1.329902] Loading iSCSI transport class v2.0-870.
[ 1.330417] iscsi: registered transport (tcp)
[ 1.331557] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 1.331724] db_root: cannot open: /etc/target
[ 1.334696] tun: Universal TUN/TAP device driver, 1.6
[ 1.335480] VFIO - User Level meta-driver version: 0.3
[ 1.337295] usbcore: registered new interface driver usb-storage
[ 1.338198] i2c_dev: i2c /dev entries driver
[ 1.342328] sdhci: Secure Digital Host Controller Interface driver
[ 1.342361] sdhci: Copyright(c) Pierre Ossman
[ 1.342768] Synopsys Designware Multimedia Card Interface Driver
[ 1.343389] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.344496] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.345653] meson-sm: secure-monitor enabled
[ 1.346231] hid: raw HID events driver (C) Jiri Kosina
[ 1.346368] usbcore: registered new interface driver usbhid
[ 1.346383] usbhid: USB HID core driver
[ 1.346769] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 1.348172] meson-saradc c1108680.adc: Looking up vref-supply from device tree
[ 1.422192] NET: Registered PF_PACKET protocol family
[ 1.422908] 9pnet: Installing 9P2000 support
[ 1.422991] Key type dns_resolver registered
[ 1.423816] registered taskstats version 1
[ 1.423871] Loading compiled-in X.509 certificates
[ 1.429073] zswap: loaded using pool zstd/z3fold
[ 1.430868] Key type .fscrypt registered
[ 1.430899] Key type fscrypt-provisioning registered
[ 1.431942] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[ 1.466504] phy phy-d0078020.phy.0: Looking up phy-supply from device tree
[ 1.466525] phy phy-d0078020.phy.0: Looking up phy-supply property in node /soc/apb@d0000000/phy@78020 failed
[ 1.470234] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
[ 2.816169] printk: console [ttyAML0] enabled
[ 2.825779] meson-gx-mmc d0074000.mmc: Looking up vmmc-supply from device tree
[ 2.825927] meson-gx-mmc d0074000.mmc: Looking up vqmmc-supply from device tree
[ 2.826111] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 2.826707] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 2.844176] HDMI_5V: 5000 mV, enabled
[ 2.844322] reg-fixed-voltage regulator-hdmi-5v: HDMI_5V supplying 5000000uV
[ 2.844550] VCC_CARD: 1800 <--> 3300 mV at 3300 mV, enabled
[ 2.844867] phy phy-d0078000.phy.1: Looking up phy-supply from device tree
[ 2.844887] HDMI_5V: could not add device link phy-d0078000.phy.1: -ENOENT
[ 2.846457] dwc3-meson-g12a d0078080.usb: Looking up vbus-supply from device tree
[ 2.846483] dwc3-meson-g12a d0078080.usb: Looking up vbus-supply property in node /soc/usb@d0078080 failed
[ 2.846674] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 2.846713] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 2.865628] meson-gx-mmc d0074000.mmc: no support for card's volts
[ 2.866183] mmc0: error -22 whilst initialising SDIO card
[ 3.360430] dwc2 c9100000.usb: Looking up vusb_d-supply from device tree
[ 3.360452] dwc2 c9100000.usb: Looking up vusb_d-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 3.360479] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 3.362076] dwc2 c9100000.usb: Looking up vusb_a-supply from device tree
[ 3.362084] dwc2 c9100000.usb: Looking up vusb_a-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 3.362098] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 3.369241] dwc2 c9100000.usb: Looking up vbus-supply from device tree
[ 3.369249] dwc2 c9100000.usb: Looking up vbus-supply property in node /soc/usb@d0078080/usb@c9100000 failed
[ 3.371180] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 3.379465] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.381532] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.389190] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
[ 3.395018] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 3.404369] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000
[ 3.410439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 3.418391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 3.425542] usb usb1: Product: xHCI Host Controller
[ 3.430369] usb usb1: Manufacturer: Linux 6.1.46-08797-g9c18484153bc xhci-hcd
[ 3.437443] usb usb1: SerialNumber: ...
[ 3.443073] hub 1-0:1.0: USB hub found
[ 3.446037] hub 1-0:1.0: 2 ports detected
[ 3.452354] meson-gx-mmc d0072000.mmc: Looking up vmmc-supply from device tree
[ 3.452475] meson-gx-mmc d0072000.mmc: Looking up vqmmc-supply from device tree
[ 3.452641] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 3.454107] of_cfs_init
[ 3.457195] of_cfs_init: OK
[ 3.460240] ALSA device list:
[ 3.462800] No soundcards found.
[ 3.485639] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
[ 3.487997] genirq: Setting trigger mode 3 for irq 27 failed (meson_gpio_irq_set_type+0x0/0x70)
[ 3.502733] Freeing unused kernel memory: 7488K
[ 3.545981] Checked W+X mappings: passed, no W+X pages found
[ 3.546064] Run /init as init process
[ 3.549664] with arguments:
[ 3.549668] /init
[ 3.549672] noquiet
[ 3.549676] splash
[ 3.549680] with environment:
[ 3.549683] HOME=/
[ 3.549687] TERM=linux
[ 3.549691] BOOT_IMAGE=/boot/vmlinuz-6.1.46-08797-g9c18484153bc
[ 3.611685] mmc1: new ultra high speed SDR104 SDHC card at address 5048
[ 3.613515] mmcblk1: mmc1:5048 SD32G 29.0 GiB
[ 3.620778] mmcblk1: p1 p2
[ 3.703262] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 3.852855] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 3.855486] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=...
[ 3.863138] usb 1-1: Product: USB2.0 Hub
[ 3.922822] hub 1-1:1.0: USB hub found
[ 3.923240] hub 1-1:1.0: 4 ports detected
[ 3.954311] [drm] Initialized simpledrm 1.0.0 20200625 for 7fe5b000.framebuffer on minor 0
[ 3.961059] Console: switching to colour frame buffer device 90x36
[ 3.970633] simple-framebuffer 7fe5b000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device
[ 3.983676] mmc0: Card stuck being busy! __mmc_poll_for_busy
[ 3.999503] simple-framebuffer simple-framebuffer.0: [drm] *ERROR* could not acquire memory range [mem 0x7fe5b000-0x7ffeffff flags 0x200]: error -16
[ 4.011102] simple-framebuffer: probe of simple-framebuffer.0 failed with error -16
[ 4.043026] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 4.044516] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 4.050626] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 4.057263] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 4.063762] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 4.071290] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 4.079848] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 4.086032] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 4.087522] meson-vrtc c81000a8.rtc: registered as rtc0
[ 4.088484] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 4.093722] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[ 4.100657] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 4.131248] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 4.134992] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 4.135519] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 4.149320] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 4.155855] lima d00c0000.gpu: Looking up mali-supply from device tree
[ 4.155884] lima d00c0000.gpu: Looking up mali-supply property in node /soc/apb@d0000000/gpu@c0000 failed
[ 4.179839] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[ 4.191760] Console: switching to colour dummy device 80x25
[ 4.205342] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[ 4.212762] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[ 4.215629] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
[ 4.220062] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[ 4.227947] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[ 4.231947] Trying to free nonexistent resource <000000007fe5b000-000000007ffeffff>
[ 4.249177] meson-dw-hdmi c883a000.hdmi-tx: Looking up hdmi-supply from device tree
[ 4.275329] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 4.287179] lima d00c0000.gpu: bus rate = 166666667
[ 4.287261] lima d00c0000.gpu: mod rate = 24000000
[ 4.292433] lima d00c0000.gpu: Looking up mali-supply from device tree
[ 4.292455] lima d00c0000.gpu: Looking up mali-supply property in node /soc/apb@d0000000/gpu@c0000 failed
[ 4.292485] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
[ 4.302855] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 4.303138] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 2
[ 4.308104] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
[ 4.311322] usb 1-1.3: new full-speed USB device number 3 using xhci-hcd
[ 4.323029] BTRFS: device label ... devid 1 transid 494 /dev/mmcblk1p2 scanned by systemd-udevd (177)
[ 4.329097] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 1
[ 4.395614] Console: switching to colour frame buffer device 90x36
[ 4.418372] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 4.430713] usb 1-1.3: New USB device found, idVendor=25a7, idProduct=fa07, bcdDevice=13.00
[ 4.433803] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 4.442686] usb 1-1.3: Product: 2.4G Wireless Receiver
[ 4.446194] usb 1-1.3: Manufacturer: Compx
[ 4.535856] input: Compx 2.4G Wireless Receiver as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:25A7:FA07.0001/input/input0
[ 4.546510] hid-generic 0003:25A7:FA07.0001: input,hidraw0: USB HID v1.10 Mouse [Compx 2.4G Wireless Receiver] on usb-xhci-hcd.0.auto-1.3/input0
[ 4.566743] input: Compx 2.4G Wireless Receiver Keyboard as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:FA07.0002/input/input1
[ 4.647527] input: Compx 2.4G Wireless Receiver as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:FA07.0002/input/input2
[ 4.667102] input: Compx 2.4G Wireless Receiver as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:FA07.0002/input/input3
[ 4.687023] hid-generic 0003:25A7:FA07.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Compx 2.4G Wireless Receiver] on usb-xhci-hcd.0.auto-1.3/input1
[ 6.142150] async_tx: api initialized (async)
[ 6.503772] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm
[ 6.506644] BTRFS info (device mmcblk1p2): disk space caching is enabled
[ 6.526326] BTRFS info (device mmcblk1p2): enabling ssd optimizations
[ 7.213533] systemd[1]: System time before build time, advancing clock.
[ 7.292418] NET: Registered PF_INET6 protocol family
[ 7.319320] Segment Routing with IPv6
[ 7.319425] RPL Segment Routing with IPv6
[ 7.321433] In-situ OAM (IOAM) with IPv6
[ 7.431868] systemd[1]: systemd 249.11-0ubuntu3.9 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 7.459491] systemd[1]: Detected architecture arm64.
[ 7.469054] systemd[1]: Hostname set to ...
[ 8.352767] systemd[1]: Condition check resulted in Root Slice being skipped.
[ 8.353103] systemd[1]: Condition check resulted in System Slice being skipped.
[ 8.368212] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.458723] systemd[1]: Created slice Slice /system/modprobe.
[ 8.463158] systemd[1]: Created slice Slice /system/serial-getty.
[ 8.471795] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 8.481282] systemd[1]: Created slice Slice /system/systemd-growfs.
[ 8.494597] systemd[1]: Created slice User and Session Slice.
[ 8.506879] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.521988] systemd[1]: Set up automount ...
[ 8.539097] systemd[1]: Reached target Slice Units.
[ 8.549058] systemd[1]: Reached target Mounting snaps.
[ 8.560029] systemd[1]: Reached target Local Verity Protected Volumes.
[ 8.569275] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 8.578489] systemd[1]: Listening on LVM2 poll daemon socket.
[ 8.586742] systemd[1]: Listening on multipathd control socket.
[ 8.597446] systemd[1]: Listening on Syslog Socket.
[ 8.605495] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.614440] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.624219] systemd[1]: Listening on Journal Audit Socket.
[ 8.631839] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.639986] systemd[1]: Listening on Journal Socket.
[ 8.647134] systemd[1]: Listening on Network Service Netlink Socket.
[ 8.655561] systemd[1]: Listening on udev Control Socket.
[ 8.662678] systemd[1]: Listening on udev Kernel Socket.
[ 8.707705] systemd[1]: Mounting Huge Pages File System...
[ 8.718583] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.730855] systemd[1]: Mounting Kernel Debug File System...
[ 8.742008] systemd[1]: Mounting Kernel Trace File System...
[ 8.757680] systemd[1]: Starting Journal Service...
[ 8.770875] systemd[1]: Starting Restore / save the current clock...
[ 8.786584] systemd[1]: Starting Set the console keyboard layout...
[ 8.800473] systemd[1]: Starting Create List of Static Device Nodes...
[ 8.814533] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 8.827332] systemd[1]: Condition check resulted in LXD - agent being skipped.
[ 8.841928] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 8.854484] systemd[1]: Starting Load Kernel Module configfs...
[ 8.865574] systemd[1]: Starting Load Kernel Module drm...
[ 8.876248] systemd[1]: Starting Load Kernel Module efi_pstore...
[ 8.893479] systemd[1]: Starting Load Kernel Module fuse...
[ 8.903486] systemd[1]: Starting Load Kernel Module pstore_blk...
[ 8.915009] systemd[1]: Starting Load Kernel Module pstore_zone...
[ 8.925781] systemd[1]: Starting Load Kernel Module ramoops...
[ 8.925828] fuse: init (API version 7.37)
[ 8.938611] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 8.947671] systemd[1]: Starting Load Kernel Modules...
[ 8.961395] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.974632] systemd[1]: Starting Coldplug All udev Devices...
[ 8.990314] systemd[1]: Mounted Huge Pages File System.
[ 8.993356] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.002018] systemd[1]: Mounted Kernel Debug File System.
[ 9.011766] systemd[1]: Mounted Kernel Trace File System.
[ 9.013842] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3
[ 9.015546] Asymmetric key parser 'pkcs8' registered
[ 9.034685] systemd[1]: Finished Restore / save the current clock.
[ 9.049999] systemd[1]: Finished Create List of Static Device Nodes.
[ 9.087616] systemd[1]: Started Journal Service.
[ 9.213120] alua: device handler registered
[ 9.221905] emc: device handler registered
[ 9.236414] rdac: device handler registered
[ 9.248931] systemd-journald[403]: Received client request to flush runtime journal.
[ 9.283983] systemd-journald[403]: File /var/log/journal/719b14afe42c42bc262cfd6564cd5839/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 9.392743] device-mapper: uevent: version 1.0.3
[ 9.393290] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX
[ 9.890955] loop0: detected capacity change from 0 to 121008
[ 9.894546] loop1: detected capacity change from 0 to 224472
[ 9.905526] loop2: detected capacity change from 0 to 88456
[ 10.713075] t9015-codec c8832000.audio-controller: Looking up AVDD-supply from device tree
[ 10.775717] mc: Linux media interface: v0.10
[ 10.777764] Registered IR keymap rc-cec
[ 10.777916] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[ 10.778059] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input4
[ 10.829769] videodev: Linux video capture interface: v2.00
[ 10.842987] Registered IR keymap rc-empty
[ 10.863274] rc rc1: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1
[ 10.881288] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[ 10.887382] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1/input5
[ 10.893325] meson-ir c8100580.ir: receiver initialized
[ 10.904565] simple-amplifier analog-amplifier: Looking up VCC-supply from device tree
[ 10.913673] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.928253] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 10.928426] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 11.247033] mousedev: PS/2 mouse device common for all mice
[ 16.903093] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 16.997908] meson8b-dwmac c9410000.ethernet eth0: PHY [mdio_mux-0.1:08] driver [Meson GXL Internal PHY] (irq=40)
[ 17.007279] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 17.007308] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 17.007881] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
[ 17.493255] openvswitch: Open vSwitch switching datapath
[ 18.171290] rc rc1: two consecutive events of type space
[ 18.618337] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.618599] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 19.794429] Adding 1048572k swap on /swapfile. Priority:-2 extents:1 across:1048572k FS
[ 20.266848] Bluetooth: Core ver 2.22
[ 20.267026] NET: Registered PF_BLUETOOTH protocol family
[ 20.267042] Bluetooth: HCI device and connection manager initialized
[ 20.267065] Bluetooth: HCI socket layer initialized
[ 20.267074] Bluetooth: L2CAP socket layer initialized
[ 20.267111] Bluetooth: SCO socket layer initialized
[ 23.080952] loop3: detected capacity change from 0 to 8