[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17 [ 0.000000] Linux version 4.15.0-91-generic (XXX@XXX) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #92-Ubuntu SMP Fri Feb 28 11:09:48 UTC 2020 (Ubuntu 4.15.0-91.92-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-91-generic root=UUID=HASH_D38-272B-D055-6585-DF0B17E6E404 ro intel_idle.max_cstate=1 quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf77ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf780000-0x00000000cf7a2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf7a3000-0x00000000cf7dffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cf7e0000-0x00000000cf7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z68X-UD3P-B3/Z68X-UD3P-B3, BIOS F4 05/02/2011 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x42f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask E00000000 write-back [ 0.000000] 5 base 300000000 mask F00000000 write-back [ 0.000000] 6 base 400000000 mask FC0000000 write-back [ 0.000000] 7 base 430000000 mask FF0000000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 16384M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcf780 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5c70-0x000f5c7f] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] BRK [0x29b191000, 0x29b191fff] PGTABLE [ 0.000000] BRK [0x29b192000, 0x29b192fff] PGTABLE [ 0.000000] BRK [0x29b193000, 0x29b193fff] PGTABLE [ 0.000000] BRK [0x29b194000, 0x29b194fff] PGTABLE [ 0.000000] BRK [0x29b195000, 0x29b195fff] PGTABLE [ 0.000000] BRK [0x29b196000, 0x29b196fff] PGTABLE [ 0.000000] BRK [0x29b197000, 0x29b197fff] PGTABLE [ 0.000000] BRK [0x29b198000, 0x29b198fff] PGTABLE [ 0.000000] BRK [0x29b199000, 0x29b199fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x30cfb000-0x34674fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7830 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CF7A3040 000050 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CF7A3100 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CF7A31C0 004D19 (v01 GBT GBTUACPI 00001000 MSFT 04000000) [ 0.000000] ACPI: FACS 0x00000000CF780000 000040 [ 0.000000] ACPI: HPET 0x00000000CF7A8040 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CF7A80C0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: ASPT 0x00000000CF7A8200 000034 (v07 GBT PerfTune 312E3042 UTBG 01010101) [ 0.000000] ACPI: SSPT 0x00000000CF7A8240 002340 (v01 GBT SsptHead 312E3042 UTBG 01010101) [ 0.000000] ACPI: EUDS 0x00000000CF7AA580 0000C0 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: MATS 0x00000000CF7AA640 000034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 0x00000000CF7AA6A0 000A6A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 0x00000000CF7A7F40 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000CF7AB140 00314C (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: MATS 0x00000000CF7AE2C0 00A8F6 (v01 MATS RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f7fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x42f7c9000-0x42f7f3fff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000042f7fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf77ffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f7fffff] [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f7fffff] [ 0.000000] On node 0 totalpages: 4189982 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13214 pages used for memmap [ 0.000000] DMA32 zone: 845696 pages, LIFO batch:31 [ 0.000000] Normal zone: 52192 pages used for memmap [ 0.000000] Normal zone: 3340288 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf780000-0xcf7a2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf7a3000-0xcf7dffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf7e0000-0xcf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcf800000-0xf3ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4124491 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-91-generic root=UUID=HASH_D38-272B-D055-6585-DF0B17E6E404 ro intel_idle.max_cstate=1 quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16342900K/16759928K available (12300K kernel code, 2481K rwdata, 4264K rodata, 2432K init, 2712K bss, 417028K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39347 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 3410.059 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6820.11 BogoMIPS (lpj=13640236) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.028724] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.029642] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.029684] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029714] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.029874] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.029874] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.029884] CPU0: Thermal monitoring enabled (TM1) [ 0.029891] process: using mwait in idle threads [ 0.029893] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.029893] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.029894] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.029896] Spectre V2 : Mitigation: Full generic retpoline [ 0.029896] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.029896] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.029903] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.029903] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.029904] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.029924] MDS: Mitigation: Clear CPU buffers [ 0.030052] Freeing SMP alternatives memory: 36K [ 0.032055] TSC deadline timer enabled [ 0.032057] smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.032112] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.032128] ... version: 3 [ 0.032128] ... bit width: 48 [ 0.032128] ... generic registers: 4 [ 0.032129] ... value mask: 0000ffffffffffff [ 0.032129] ... max period: 00007fffffffffff [ 0.032130] ... fixed-purpose events: 3 [ 0.032130] ... event mask: 000000070000000f [ 0.032158] Hierarchical SRCU implementation. [ 0.032952] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.032965] smp: Bringing up secondary CPUs ... [ 0.033027] x86: Booting SMP configuration: [ 0.033028] .... node #0, CPUs: #1 #2 #3 #4 [ 0.042465] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.042465] #5 #6 #7 [ 0.048021] smp: Brought up 1 node, 8 CPUs [ 0.048021] smpboot: Max logical packages: 1 [ 0.048021] smpboot: Total of 8 processors activated (54560.94 BogoMIPS) [ 0.052393] devtmpfs: initialized [ 0.052393] x86/mm: Memory block size: 128MB [ 0.052933] evm: security.selinux [ 0.052933] evm: security.SMACK64 [ 0.052933] evm: security.SMACK64EXEC [ 0.052934] evm: security.SMACK64TRANSMUTE [ 0.052934] evm: security.SMACK64MMAP [ 0.052934] evm: security.apparmor [ 0.052935] evm: security.ima [ 0.052935] evm: security.capability [ 0.052947] PM: Registering ACPI NVS region [mem 0xcf780000-0xcf7a2fff] (143360 bytes) [ 0.052947] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.052947] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.052947] pinctrl core: initialized pinctrl subsystem [ 0.052947] RTC time: 7:03:23, date: 04/01/20 [ 0.052947] NET: Registered protocol family 16 [ 0.052947] cpuidle: using governor ladder [ 0.052947] cpuidle: using governor menu [ 0.052947] ACPI: bus type PCI registered [ 0.052947] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.052947] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.052947] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.052947] PCI: Using configuration type 1 for base access [ 0.052947] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.053001] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.053001] ACPI: Added _OSI(Module Device) [ 0.053001] ACPI: Added _OSI(Processor Device) [ 0.053001] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.053001] ACPI: Added _OSI(Processor Aggregator Device) [ 0.053001] ACPI: Added _OSI(Linux-Dell-Video) [ 0.053001] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.053001] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.061170] ACPI: Interpreter enabled [ 0.061182] ACPI: (supports S0 S3 S4 S5) [ 0.061183] ACPI: Using IOAPIC for interrupt routing [ 0.061200] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.061344] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.065247] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.065247] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.065247] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.065247] PCI host bridge to bus 0000:00 [ 0.065247] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.065247] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.065247] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.065247] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.065247] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.065247] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.065247] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.065247] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.065247] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.065247] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.065247] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.065247] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit] [ 0.065247] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.065247] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.065247] pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff] [ 0.065247] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.065247] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.065247] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit] [ 0.065247] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.065247] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.065247] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.065271] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401 [ 0.065348] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.065418] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.065495] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.065564] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.065640] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.065711] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.065788] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.065857] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 0.065934] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.066004] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.066024] pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff] [ 0.066100] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.066166] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100 [ 0.066324] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f [ 0.066338] pci 0000:00:1f.2: reg 0x10: [io 0xff00-0xff07] [ 0.066344] pci 0000:00:1f.2: reg 0x14: [io 0xfe00-0xfe03] [ 0.066350] pci 0000:00:1f.2: reg 0x18: [io 0xfd00-0xfd07] [ 0.066356] pci 0000:00:1f.2: reg 0x1c: [io 0xfc00-0xfc03] [ 0.066362] pci 0000:00:1f.2: reg 0x20: [io 0xfb00-0xfb0f] [ 0.066368] pci 0000:00:1f.2: reg 0x24: [io 0xfa00-0xfa0f] [ 0.066451] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.066467] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit] [ 0.066485] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.066560] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185 [ 0.066574] pci 0000:00:1f.5: reg 0x10: [io 0xf800-0xf807] [ 0.066580] pci 0000:00:1f.5: reg 0x14: [io 0xf700-0xf703] [ 0.066586] pci 0000:00:1f.5: reg 0x18: [io 0xf600-0xf607] [ 0.066592] pci 0000:00:1f.5: reg 0x1c: [io 0xf500-0xf503] [ 0.066598] pci 0000:00:1f.5: reg 0x20: [io 0xf400-0xf40f] [ 0.066604] pci 0000:00:1f.5: reg 0x24: [io 0xf300-0xf30f] [ 0.066710] pci 0000:01:00.0: [10de:0fc1] type 00 class 0x030000 [ 0.066725] pci 0000:01:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff] [ 0.066734] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.066742] pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref] [ 0.066748] pci 0000:01:00.0: reg 0x24: [io 0xbf00-0xbf7f] [ 0.066755] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.066832] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300 [ 0.066845] pci 0000:01:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff] [ 0.080023] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.080026] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.080029] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff] [ 0.080033] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.080091] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.080163] pci 0000:03:00.0: [1283:8892] type 01 class 0x060401 [ 0.080313] pci 0000:03:00.0: supports D1 D2 [ 0.080313] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080347] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode) [ 0.080350] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.080353] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.080357] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.080358] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.080359] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.080360] pci 0000:00:1c.3: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.080361] pci 0000:00:1c.3: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.080362] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode) [ 0.080428] pci 0000:04:02.0: [1106:3044] type 00 class 0x0c0010 [ 0.080471] pci 0000:04:02.0: reg 0x10: [mem 0xfbbff000-0xfbbff7ff] [ 0.080491] pci 0000:04:02.0: reg 0x14: [io 0xef00-0xef7f] [ 0.080641] pci 0000:04:02.0: supports D2 [ 0.080642] pci 0000:04:02.0: PME# supported from D2 D3hot D3cold [ 0.080746] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode) [ 0.080756] pci 0000:03:00.0: bridge window [io 0xe000-0xefff] [ 0.080762] pci 0000:03:00.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.080772] pci 0000:03:00.0: bridge window [io 0xe000-0xefff] (subtractive decode) [ 0.080773] pci 0000:03:00.0: bridge window [mem 0xfbb00000-0xfbbfffff] (subtractive decode) [ 0.080774] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.080774] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.080775] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.080776] pci 0000:03:00.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.080777] pci 0000:03:00.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.080778] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode) [ 0.080840] pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.080878] pci 0000:05:00.0: reg 0x10: [mem 0xfbaf8000-0xfbafffff 64bit] [ 0.080947] pci 0000:05:00.0: enabling Extended Tags [ 0.081017] pci 0000:05:00.0: supports D1 D2 [ 0.081017] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092025] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.092032] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff] [ 0.092119] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330 [ 0.092157] pci 0000:06:00.0: reg 0x10: [mem 0xfbef8000-0xfbefffff 64bit] [ 0.092225] pci 0000:06:00.0: enabling Extended Tags [ 0.092294] pci 0000:06:00.0: supports D1 D2 [ 0.092295] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.104024] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 0.104030] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.104108] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 [ 0.104150] pci 0000:07:00.0: reg 0x10: [io 0xde00-0xdeff] [ 0.104182] pci 0000:07:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref] [ 0.104202] pci 0000:07:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref] [ 0.104312] pci 0000:07:00.0: supports D1 D2 [ 0.104312] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.116026] pci 0000:00:1c.6: PCI bridge to [bus 07] [ 0.116030] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 0.116039] pci 0000:00:1c.6: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 0.116119] pci 0000:08:00.0: [1b4b:917a] type 00 class 0x01018f [ 0.116145] pci 0000:08:00.0: reg 0x10: [io 0xcf00-0xcf07] [ 0.116157] pci 0000:08:00.0: reg 0x14: [io 0xce00-0xce03] [ 0.116168] pci 0000:08:00.0: reg 0x18: [io 0xcd00-0xcd07] [ 0.116179] pci 0000:08:00.0: reg 0x1c: [io 0xcc00-0xcc03] [ 0.116190] pci 0000:08:00.0: reg 0x20: [io 0xcb00-0xcb0f] [ 0.116201] pci 0000:08:00.0: reg 0x24: [mem 0xfbcff000-0xfbcff1ff] [ 0.116213] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.116228] pci 0000:08:00.0: Enabling fixed DMA alias to 00.1 [ 0.116278] pci 0000:08:00.0: PME# supported from D3hot [ 0.128020] pci 0000:00:1c.7: PCI bridge to [bus 08] [ 0.128024] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 0.128028] pci 0000:00:1c.7: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.128560] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.128615] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.128668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.128720] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.128773] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.128825] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.128878] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.128931] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.129150] SCSI subsystem initialized [ 0.129160] libata version 3.00 loaded. [ 0.129160] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.129160] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.129160] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.129160] vgaarb: loaded [ 0.129160] ACPI: bus type USB registered [ 0.129160] usbcore: registered new interface driver usbfs [ 0.129160] usbcore: registered new interface driver hub [ 0.129160] usbcore: registered new device driver usb [ 0.129160] EDAC MC: Ver: 3.0.0 [ 0.129160] PCI: Using ACPI for IRQ routing [ 0.129335] PCI: pci_cache_line_size set to 64 bytes [ 0.129398] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.129398] e820: reserve RAM buffer [mem 0xcf780000-0xcfffffff] [ 0.129399] e820: reserve RAM buffer [mem 0x42f800000-0x42fffffff] [ 0.129460] NetLabel: Initializing [ 0.129461] NetLabel: domain hash size = 128 [ 0.129461] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.129472] NetLabel: unlabeled traffic allowed by default [ 0.132437] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.132440] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.133022] clocksource: Switched to clocksource hpet [ 0.139549] VFS: Disk quotas dquot_6.6.0 [ 0.139564] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.139635] AppArmor: AppArmor Filesystem Enabled [ 0.139656] pnp: PnP ACPI init [ 0.139818] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.139819] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.139820] system 00:00: [io 0x0800-0x0805] has been reserved [ 0.139821] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.139822] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.139826] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.139889] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.140168] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.140254] system 00:03: [io 0x0400-0x04cf] has been reserved [ 0.140256] system 00:03: [io 0x04d2-0x04ff] has been reserved [ 0.140259] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.140289] system 00:04: [io 0x1000-0x107f] has been reserved [ 0.140290] system 00:04: [io 0x1080-0x10ff] has been reserved [ 0.140290] system 00:04: [io 0x1100-0x117f] has been reserved [ 0.140291] system 00:04: [io 0x1180-0x11ff] has been reserved [ 0.140294] system 00:04: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active) [ 0.140476] system 00:05: [io 0x0454-0x0457] has been reserved [ 0.140479] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.140516] system 00:06: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.140519] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.140725] system 00:07: [mem 0x000ce400-0x000cffff] has been reserved [ 0.140726] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.140727] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.140728] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.140729] system 00:07: [mem 0xcf780000-0xcf7dffff] could not be reserved [ 0.140730] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.140731] system 00:07: [mem 0x00100000-0xcf77ffff] could not be reserved [ 0.140731] system 00:07: [mem 0xcf7e0000-0xcf7fffff] has been reserved [ 0.140732] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.140734] system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.140734] system 00:07: [mem 0xfed20000-0xfed8ffff] could not be reserved [ 0.140735] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.140736] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.140737] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 0.140738] system 00:07: [mem 0x000e0000-0x000effff] has been reserved [ 0.140739] system 00:07: [mem 0x20000000-0x201fffff] could not be reserved [ 0.140740] system 00:07: [mem 0x40000000-0x400fffff] could not be reserved [ 0.140741] system 00:07: [mem 0xcf800000-0xcfffffff] could not be reserved [ 0.140744] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.140748] pnp: PnP ACPI: found 8 devices [ 0.146484] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.146498] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.146500] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.146501] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.146551] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff] [ 0.146555] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.146556] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 0.146558] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref] [ 0.146559] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.146561] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.146562] pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff] [ 0.146564] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref] [ 0.146566] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.146568] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.146571] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff] [ 0.146573] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.146578] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.146581] pci 0000:03:00.0: bridge window [io 0xe000-0xefff] [ 0.146589] pci 0000:03:00.0: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.146604] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.146606] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.146609] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.146616] pci 0000:00:1c.4: PCI bridge to [bus 05] [ 0.146620] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff] [ 0.146626] pci 0000:00:1c.5: PCI bridge to [bus 06] [ 0.146630] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.146636] pci 0000:00:1c.6: PCI bridge to [bus 07] [ 0.146638] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 0.146643] pci 0000:00:1c.6: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 0.146648] pci 0000:08:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc0ffff pref] [ 0.146649] pci 0000:00:1c.7: PCI bridge to [bus 08] [ 0.146651] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 0.146654] pci 0000:00:1c.7: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.146661] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.146662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.146663] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.146664] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.146665] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window] [ 0.146665] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff window] [ 0.146666] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.146667] pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff] [ 0.146668] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref] [ 0.146669] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.146670] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff] [ 0.146670] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.146671] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.146672] pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.146673] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.146673] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.146674] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.146675] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.146676] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window] [ 0.146676] pci_bus 0000:03: resource 9 [mem 0xd0000000-0xfebfffff window] [ 0.146677] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.146678] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.146679] pci_bus 0000:04: resource 4 [io 0xe000-0xefff] [ 0.146680] pci_bus 0000:04: resource 5 [mem 0xfbb00000-0xfbbfffff] [ 0.146680] pci_bus 0000:04: resource 6 [io 0x0000-0x0cf7 window] [ 0.146681] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window] [ 0.146682] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.146683] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.146683] pci_bus 0000:04: resource 10 [mem 0xfed40000-0xfed44fff window] [ 0.146684] pci_bus 0000:04: resource 11 [mem 0xd0000000-0xfebfffff window] [ 0.146685] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 0.146686] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.146687] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] [ 0.146688] pci_bus 0000:07: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref] [ 0.146688] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff] [ 0.146689] pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.146748] NET: Registered protocol family 2 [ 0.146865] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.147014] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.147109] TCP: Hash tables configured (established 131072 bind 65536) [ 0.147137] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.147171] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.147225] NET: Registered protocol family 1 [ 0.188164] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.188421] PCI: CLS 4 bytes, default 64 [ 0.188452] Unpacking initramfs... [ 0.783884] Freeing initrd memory: 58856K [ 0.783915] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.783916] software IO TLB: mapped [mem 0xcb780000-0xcf780000] (64MB) [ 0.784201] Scanning for low memory corruption every 60 seconds [ 0.784721] Initialise system trusted keyrings [ 0.784727] Key type blacklist registered [ 0.784752] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.785526] zbud: loaded [ 0.785872] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.785965] fuse init (API version 7.26) [ 0.787036] Key type asymmetric registered [ 0.787036] Asymmetric key parser 'x509' registered [ 0.787055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.787082] io scheduler noop registered [ 0.787083] io scheduler deadline registered [ 0.787100] io scheduler cfq registered (default) [ 0.787343] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.787733] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.787733] vesafb: scrolling: redraw [ 0.787735] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.787742] vesafb: framebuffer at 0xef000000, mapped to 0x (ptrval), using 5120k, total 5120k [ 0.787810] Console: switching to colour frame buffer device 160x64 [ 0.787825] fb0: VESA VGA frame buffer device [ 0.787834] intel_idle: MWAIT substates: 0x1120 [ 0.787835] intel_idle: v0.4.1 model 0x2A [ 0.787837] intel_idle: max_cstate 1 reached [ 0.787954] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.788014] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.788020] ACPI: Power Button [PWRB] [ 0.788049] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.788067] ACPI: Power Button [PWRF] [ 0.789361] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.809832] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.811237] Linux agpgart interface v0.103 [ 0.812581] loop: module loaded [ 0.812652] ata_piix 0000:00:1f.2: version 2.13 [ 0.812712] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.813286] scsi host0: ata_piix [ 0.813348] scsi host1: ata_piix [ 0.813371] ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 19 [ 0.813374] ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 19 [ 0.813438] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.813911] scsi host2: ata_piix [ 0.813977] scsi host3: ata_piix [ 0.814003] ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 [ 0.814005] ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 [ 0.814060] libphy: Fixed MDIO Bus: probed [ 0.814061] tun: Universal TUN/TAP device driver, 1.6 [ 0.814089] PPP generic driver version 2.4.2 [ 0.814117] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.814124] ehci-pci: EHCI PCI platform driver [ 0.814203] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.814207] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.814217] ehci-pci 0000:00:1a.0: debug port 2 [ 0.818123] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported [ 0.818131] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000 [ 0.836011] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.836037] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.836038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.836039] usb usb1: Product: EHCI Host Controller [ 0.836040] usb usb1: Manufacturer: Linux 4.15.0-91-generic ehci_hcd [ 0.836040] usb usb1: SerialNumber: ... [ 0.836112] hub 1-0:1.0: USB hub found [ 0.836116] hub 1-0:1.0: 2 ports detected [ 0.836263] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.836266] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.836274] ehci-pci 0000:00:1d.0: debug port 2 [ 0.840157] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported [ 0.840164] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000 [ 0.856013] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.856033] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.856034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.856035] usb usb2: Product: EHCI Host Controller [ 0.856036] usb usb2: Manufacturer: Linux 4.15.0-91-generic ehci_hcd [ 0.856036] usb usb2: SerialNumber: ... [ 0.856098] hub 2-0:1.0: USB hub found [ 0.856101] hub 2-0:1.0: 2 ports detected [ 0.856172] ehci-platform: EHCI generic platform driver [ 0.856177] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.856179] ohci-pci: OHCI PCI platform driver [ 0.856185] ohci-platform: OHCI generic platform driver [ 0.856190] uhci_hcd: USB Universal Host Controller Interface driver [ 0.856247] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 0.856250] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 [ 0.856360] xhci_hcd 0000:05:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 0.856512] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.856513] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.856514] usb usb3: Product: xHCI Host Controller [ 0.856515] usb usb3: Manufacturer: Linux 4.15.0-91-generic xhci-hcd [ 0.856516] usb usb3: SerialNumber: ... [ 0.856576] hub 3-0:1.0: USB hub found [ 0.856583] hub 3-0:1.0: 2 ports detected [ 0.856645] xhci_hcd 0000:05:00.0: xHCI Host Controller [ 0.856647] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4 [ 0.856649] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed [ 0.856661] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.856674] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.856675] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.856676] usb usb4: Product: xHCI Host Controller [ 0.856677] usb usb4: Manufacturer: Linux 4.15.0-91-generic xhci-hcd [ 0.856677] usb usb4: SerialNumber: ... [ 0.856730] hub 4-0:1.0: USB hub found [ 0.856736] hub 4-0:1.0: 2 ports detected [ 0.856839] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 0.856842] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5 [ 0.856949] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0000000000080490 [ 0.857096] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.857097] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.857098] usb usb5: Product: xHCI Host Controller [ 0.857099] usb usb5: Manufacturer: Linux 4.15.0-91-generic xhci-hcd [ 0.857100] usb usb5: SerialNumber: ... [ 0.857153] hub 5-0:1.0: USB hub found [ 0.857159] hub 5-0:1.0: 2 ports detected [ 0.857219] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 0.857220] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6 [ 0.857222] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 0.857234] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.857246] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.857246] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.857247] usb usb6: Product: xHCI Host Controller [ 0.857248] usb usb6: Manufacturer: Linux 4.15.0-91-generic xhci-hcd [ 0.857249] usb usb6: SerialNumber: ... [ 0.857300] hub 6-0:1.0: USB hub found [ 0.857307] hub 6-0:1.0: 2 ports detected [ 0.857387] i8042: PNP: No PS/2 controller found. [ 0.857387] i8042: Probing ports directly. [ 0.890894] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 0.890894] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 1.137010] ata4: SATA link down (SStatus 0 SControl 300) [ 1.148091] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.148147] mousedev: PS/2 mouse device common for all mice [ 1.148243] rtc_cmos 00:01: RTC can wake from S4 [ 1.148344] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.148367] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.148372] i2c /dev entries driver [ 1.148402] device-mapper: uevent: version 1.0.3 [ 1.148442] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: XXX@XXX [ 1.148445] intel_pstate: Intel P-state driver initializing [ 1.148636] ledtrig-cpu: registered to indicate activity on CPUs [ 1.148882] NET: Registered protocol family 10 [ 1.152288] Segment Routing with IPv6 [ 1.152301] NET: Registered protocol family 17 [ 1.152328] Key type dns_resolver registered [ 1.152590] mce: Using 9 MCE banks [ 1.152599] RAS: Correctable Errors collector initialized. [ 1.152621] microcode: sig=0x206a7, pf=0x2, revision=0x2f [ 1.152669] microcode: Microcode Update Driver: v2.2. [ 1.152675] sched_clock: Marking stable (1152666594, 0)->(1142006233, 10660361) [ 1.152808] registered taskstats version 1 [ 1.152816] Loading compiled-in X.509 certificates [ 1.154923] Loaded X.509 cert 'Build time autogenerated kernel key: d019e8c5f4cbc828f6af43369f65a014a3a68371' [ 1.154936] zswap: loaded using pool lzo/zbud [ 1.157963] Key type big_key registered [ 1.157965] Key type trusted registered [ 1.159395] Key type encrypted registered [ 1.159397] AppArmor: AppArmor sha1 policy hashing enabled [ 1.159398] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.159400] ima: Allocated hash algorithm: sha1 [ 1.159410] evm: HMAC attrs: 0x1 [ 1.159657] Magic number: 0:315:65 [ 1.159699] memory memory93: hash matches [ 1.159743] rtc_cmos 00:01: setting system clock to 2020-04-01 07:03:24 UTC (1585724604) [ 1.159774] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.159774] EDD information not available. [ 1.172010] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.192007] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.296047] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.298489] ata3.00: ATA-8: WDC WD10EARS-003BB1, 80.00A80, max UDMA/133 [ 1.298490] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.301523] ata3.00: configured for UDMA/133 [ 1.328289] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.328290] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.328428] hub 1-1:1.0: USB hub found [ 1.328537] hub 1-1:1.0: 6 ports detected [ 1.348288] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.348289] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.348425] hub 2-1:1.0: USB hub found [ 1.348537] hub 2-1:1.0: 8 ports detected [ 1.449042] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.449054] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.596056] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.596068] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.600885] ata1.00: ATA-8: OCZ-PETROL, 3.15.1, max UDMA/133 [ 1.600886] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.602264] ata1.01: ATA-8: ST93205620AS, SD26, max UDMA/133 [ 1.602264] ata1.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.616004] usb 1-1.5: new full-speed USB device number 3 using ehci-pci [ 1.626497] ata1.00: configured for UDMA/133 [ 1.632409] ata1.01: configured for UDMA/133 [ 1.632523] scsi 0:0:0:0: Direct-Access ATA OCZ-PETROL .1 PQ: 0 ANSI: 5 [ 1.632670] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.632674] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.632683] sd 0:0:0:0: [sda] Write Protect is off [ 1.632685] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.632700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.632810] scsi 0:0:1:0: Direct-Access ATA ST93205620AS SD26 PQ: 0 ANSI: 5 [ 1.632922] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.633027] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-003 0A80 PQ: 0 ANSI: 5 [ 1.633139] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.633192] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.633205] sd 2:0:0:0: [sdc] Write Protect is off [ 1.633206] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.633227] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.633411] sda: sda1 sda2 sda3 sda4 [ 1.633429] sd 0:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.633435] sd 0:0:1:0: [sdb] Write Protect is off [ 1.633436] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.633445] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.634112] sdb: sdb1 sdb2 sdb3 < sdb5 > sdb4 [ 1.634144] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.634316] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.636002] usb 2-1.7: new full-speed USB device number 3 using ehci-pci [ 1.663677] sdc: sdc1 sdc2 < sdc5 > sdc3 [ 1.663943] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.665602] Freeing unused kernel image memory: 2432K [ 1.692002] Write protecting the kernel read-only data: 20480k [ 1.692334] Freeing unused kernel image memory: 2008K [ 1.692533] Freeing unused kernel image memory: 1880K [ 1.698839] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.698840] x86/mm: Checking user space page tables [ 1.704825] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.736279] usb 1-1.5: New USB device found, idVendor=248a, idProduct=8366 [ 1.736281] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.736282] usb 1-1.5: Product: SVEN Wireless Mouse [ 1.736283] usb 1-1.5: Manufacturer: Telink [ 1.739357] hidraw: raw HID events driver (C) Jiri Kosina [ 1.743763] usbcore: registered new interface driver usbhid [ 1.743763] usbhid: USB HID core driver [ 1.745455] input: Telink SVEN Wireless Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:248A:8366.0001/input/input3 [ 1.750653] usb 2-1.7: New USB device found, idVendor=0603, idProduct=00f5 [ 1.750654] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.750655] usb 2-1.7: Product: Mechanical Keyboard [ 1.750656] usb 2-1.7: Manufacturer: SINO WEALTH [ 1.752044] input: SINO WEALTH Mechanical Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:0603:00F5.0002/input/input4 [ 1.771921] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.771929] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.772258] ahci 0000:08:00.0: version 3.0 [ 1.772440] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 1.772443] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.772518] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0x (ptrval), XX:XX:XX:XX:XX:XX, XID 0c900800 IRQ 26 [ 1.772520] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.774763] scsi host4: ahci [ 1.775206] scsi host5: ahci [ 1.775247] ata5: SATA max UDMA/133 abar m512@0xfbcff000 port 0xfbcff100 irq 27 [ 1.775250] ata6: SATA max UDMA/133 abar m512@0xfbcff000 port 0xfbcff180 irq 27 [ 1.788016] tsc: Refined TSC clocksource calibration: 3410.014 MHz [ 1.788023] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x312742bc088, max_idle_ns: 440795245657 ns [ 1.802392] r8169 0000:07:00.0 enp7s0: renamed from eth0 [ 1.804101] hid-generic 0003:248A:8366.0001: input,hidraw0: USB HID v1.11 Mouse [Telink SVEN Wireless Mouse] on usb-0000:00:1a.0-1.5/input0 [ 1.812671] random: fast init done [ 1.832065] firewire_ohci 0000:04:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 1.832159] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.832165] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.832179] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.868088] hid-generic 0003:0603:00F5.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH Mechanical Keyboard] on usb-0000:00:1d.0-1.7/input0 [ 1.870446] input: SINO WEALTH Mechanical Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/0003:0603:00F5.0003/input/input5 [ 1.928086] hid-generic 0003:0603:00F5.0003: input,hiddev0,hidraw2: USB HID v1.10 Keyboard [SINO WEALTH Mechanical Keyboard] on usb-0000:00:1d.0-1.7/input1 [ 2.090262] ata6: SATA link down (SStatus 0 SControl 300) [ 2.252016] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.252511] ata5.00: ATA-9: WDC WD20EZRZ-00Z5HB0, 80.00A80, max UDMA/133 [ 2.252513] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.253024] ata5.00: configured for UDMA/133 [ 2.253137] scsi 4:0:0:0: Direct-Access ATA WDC WD20EZRZ-00Z 0A80 PQ: 0 ANSI: 5 [ 2.253328] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.253337] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.253338] sd 4:0:0:0: [sdd] 4096-byte physical blocks [ 2.253351] sd 4:0:0:0: [sdd] Write Protect is off [ 2.253353] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.253377] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.328811] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 [ 2.329123] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 2.364048] firewire_core 0000:04:02.0: created device fw0: GUID 00656f1c1be2ca00, S400 [ 2.812040] clocksource: Switched to clocksource tsc [ 3.947996] raid6: sse2x1 gen() 10389 MB/s [ 3.995997] raid6: sse2x1 xor() 7114 MB/s [ 4.043997] raid6: sse2x2 gen() 12193 MB/s [ 4.091997] raid6: sse2x2 xor() 8275 MB/s [ 4.139996] raid6: sse2x4 gen() 14487 MB/s [ 4.187996] raid6: sse2x4 xor() 9638 MB/s [ 4.187997] raid6: using algorithm sse2x4 gen() 14487 MB/s [ 4.187997] raid6: .... xor() 9638 MB/s, rmw enabled [ 4.187998] raid6: using ssse3x2 recovery algorithm [ 4.190492] xor: automatically using best checksumming function avx [ 4.204699] Btrfs loaded, crc32c=crc32c-intel [ 4.316529] BTRFS: device fsid HASH_C23-4854-5DE8-2D33-C7FABAA80CFF devid 1 transid 365 /dev/sdd4 [ 4.316873] BTRFS: device label ... devid 1 transid 3946 /dev/sdc3 [ 4.364010] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 4.596651] ip_tables: (C) 0DB3-0E5D Netfilter Core Team [ 4.608630] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.628118] systemd[1]: Detected architecture x86-64. [ 4.629748] systemd[1]: Set hostname to ... [ 4.973552] systemd[1]: Reached target User and Group Name Lookups. [ 4.973603] systemd[1]: Reached target Remote File Systems. [ 4.974183] systemd[1]: Created slice System Slice. [ 4.974237] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.974279] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.974319] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.974457] systemd[1]: Set up automount ... [ 5.103783] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro [ 5.217674] random: crng init done [ 5.217675] random: 7 urandom warning(s) missed due to ratelimiting [ 5.229442] systemd-journald[426]: Received request to flush runtime journal from PID 1 [ 5.323132] lp: driver loaded but no devices found [ 5.329806] ppdev: user-space parallel port driver [ 5.435078] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 5.435080] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 5.435080] RAPL PMU: hw unit of domain package 2^-16 Joules [ 5.435080] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 5.535593] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.549219] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247) [ 5.549225] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247) [ 5.549229] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.549258] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.631360] AVX version of gcm_enc/dec engaged. [ 5.631361] AES CTR mode by8 optimization enabled [ 5.782884] ipmi message handler version 39.2 [ 5.812351] ipmi device interface [ 5.817233] intel_rapl: Found RAPL domain package [ 5.817235] intel_rapl: Found RAPL domain core [ 5.822831] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.822838] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.868379] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 5.868382] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.868384] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.868385] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 5.868387] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e [ 5.868388] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 5.868390] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 5.868392] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 5.868393] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 5.883278] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 5.883341] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 5.883401] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 5.883457] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.883512] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.883574] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.883641] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.883699] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 5.922964] gpio_ich: GPIO from 436 to 511 on gpio_ich [ 6.004784] nvidia: loading out-of-tree module taints kernel. [ 6.004792] nvidia: module license 'NVIDIA' taints kernel. [ 6.004793] Disabling lock debugging due to kernel taint [ 6.009372] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 6.016132] nvidia-nvlink: Nvlink Core is being initialized, major device number 240 [ 6.016412] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 6.115900] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 435.21 Sun Aug 25 08:17:57 CDT 2019 [ 6.132805] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 435.21 Sun Aug 25 08:07:52 CDT 2019 [ 6.140096] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 6.140098] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 6.167296] nvidia-uvm: Loaded the UVM driver, major device number 238. [ 6.388425] Adding 35333116k swap on /dev/sdd5. Priority:-2 extents:1 across:35333116k FS [ 6.560782] resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than pnp 00:07 [mem 0x000e0000-0x000effff] [ 6.560923] caller os_map_kernel_space.part.10+0x74/0x90 [nvidia] mapping multiple BARs [ 6.636406] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 6.636448] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 6.636491] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 6.746465] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 6.746632] caller os_map_kernel_space.part.10+0x74/0x90 [nvidia] mapping multiple BARs [ 7.101472] Adding 15361020k swap on /dev/sda3. Priority:-3 extents:1 across:15361020k SSFS [ 9.608605] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 9.781422] aufs 4.15-20180219 [ 9.805401] r8169 0000:07:00.0 enp7s0: link down [ 9.805403] r8169 0000:07:00.0 enp7s0: link down [ 9.805474] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 10.467030] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window] [ 10.467159] caller os_map_kernel_space.part.10+0x74/0x90 [nvidia] mapping multiple BARs [ 11.355046] r8169 0000:07:00.0 enp7s0: link up [ 11.355052] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [ 66.006398] Could not find key with description: [1177b16c35e399a0] [ 66.006401] process_request_key_err: No key [ 66.006402] Could not find valid key in user session keyring for sig specified in mount option: [1177b16c35e399a0] [ 66.006403] One or more global auth toks could not properly register; rc = [-2] [ 66.006404] Error parsing options; rc = [-2] [ 67.089225] FAT-fs (sdd3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 67.120696] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 67.122540] BTRFS info (device sdd4): disk space caching is enabled [ 67.122542] BTRFS info (device sdd4): has skinny extents [ 96.296625] usb 2-1.1: new full-speed USB device number 4 using ehci-pci [ 96.406873] usb 2-1.1: New USB device found, idVendor=24dc, idProduct=0101 [ 96.406877] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 96.406879] usb 2-1.1: Product: JaCarta [ 96.406880] usb 2-1.1: Manufacturer: ARDS [ 96.406882] usb 2-1.1: SerialNumber: ... [ 3391.505126] usb 2-1.2: new high-speed USB device number 5 using ehci-pci [ 3391.621132] usb 2-1.2: New USB device found, idVendor=058f, idProduct=6387 [ 3391.621135] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3391.621137] usb 2-1.2: Product: Mass Storage [ 3391.621139] usb 2-1.2: Manufacturer: Generic [ 3391.621141] usb 2-1.2: SerialNumber: ... [ 3391.639373] usb-storage 2-1.2:1.0: USB Mass Storage device detected [ 3391.639487] scsi host6: usb-storage 2-1.2:1.0 [ 3391.639554] usbcore: registered new interface driver usb-storage [ 3391.641457] usbcore: registered new interface driver uas [ 3391.644119] show_signal_msg: 32 callbacks suppressed [ 3391.644121] colord-sane[7823]: segfault at 0 ip 00007fdc93df7064 sp 00007fff27dd40b0 error 4 in libpmxnet-rxesg.so[7fdc93df5000+5000] [ 3392.659142] scsi 6:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 3392.659481] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 3392.660636] sd 6:0:0:0: [sde] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 3392.661762] sd 6:0:0:0: [sde] Write Protect is off [ 3392.661766] sd 6:0:0:0: [sde] Mode Sense: 23 00 00 00 [ 3392.662882] sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3392.668783] sde: sde1 [ 3392.672125] sd 6:0:0:0: [sde] Attached SCSI removable disk [ 3392.676229] colord-sane[7836]: segfault at 0 ip 00007f031c184064 sp 00007ffd67921b90 error 4 in libpmxnet-rxesg.so[7f031c182000+5000] [ 3393.445253] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 3547.441664] usb 2-1.2: USB disconnect, device number 5 [ 3547.475444] colord-sane[8117]: segfault at 0 ip 00007f8b95de0064 sp 00007ffe3e711210 error 4 in libpmxnet-rxesg.so[7f8b95dde000+5000] [22384.011566] usb 2-1.2: new high-speed USB device number 6 using ehci-pci [22384.120850] usb 2-1.2: New USB device found, idVendor=2717, idProduct=ff40 [22384.120853] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22384.120855] usb 2-1.2: Product: MI MAX 2 [22384.120856] usb 2-1.2: Manufacturer: Xiaomi [22384.120858] usb 2-1.2: SerialNumber: ... [22384.144381] show_signal_msg: 42 callbacks suppressed [22384.144382] colord-sane[21896]: segfault at 0 ip 00007f79465a5064 sp 00007ffff71900b0 error 4 in libpmxnet-rxesg.so[7f79465a3000+5000] [22401.710103] usb 2-1.2: USB disconnect, device number 6 [22401.731608] colord-sane[21948]: segfault at 0 ip 00007f5ed6bef064 sp 00007ffe04695a50 error 4 in libpmxnet-rxesg.so[7f5ed6bed000+5000] [22401.971572] usb 2-1.2: new high-speed USB device number 7 using ehci-pci [22402.084724] usb 2-1.2: New USB device found, idVendor=2717, idProduct=ff40 [22402.084726] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22402.084728] usb 2-1.2: Product: MI MAX 2 [22402.084729] usb 2-1.2: Manufacturer: Xiaomi [22402.084730] usb 2-1.2: SerialNumber: ... [22402.109990] colord-sane[21970]: segfault at 0 ip 00007fab716c9064 sp 00007ffcb76ae6f0 error 4 in libpmxnet-rxesg.so[7fab716c7000+5000] [22814.635220] usb 2-1.2: USB disconnect, device number 7 [22814.656482] colord-sane[22475]: segfault at 0 ip 00007f26a3bf1064 sp 00007ffebdfc2e80 error 4 in libpmxnet-rxesg.so[7f26a3bef000+5000] [23431.302963] usb 2-1.2: new high-speed USB device number 8 using ehci-pci [23431.412042] usb 2-1.2: New USB device found, idVendor=2717, idProduct=ff40 [23431.412045] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [23431.412047] usb 2-1.2: Product: MI MAX 2 [23431.412049] usb 2-1.2: Manufacturer: Xiaomi [23431.412050] usb 2-1.2: SerialNumber: ... [23431.443047] colord-sane[22802]: segfault at 0 ip 00007f3f30b46064 sp 00007ffc193fdd90 error 4 in libpmxnet-rxesg.so[7f3f30b44000+5000] [23438.246872] usb 2-1.2: USB disconnect, device number 8 [23438.267453] colord-sane[22849]: segfault at 0 ip 00007f52a24ec064 sp 00007ffdf11c2f80 error 4 in libpmxnet-rxesg.so[7f52a24ea000+5000] [23438.474976] usb 2-1.2: new high-speed USB device number 9 using ehci-pci [23438.583989] usb 2-1.2: New USB device found, idVendor=2717, idProduct=ff40 [23438.583990] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [23438.583992] usb 2-1.2: Product: MI MAX 2 [23438.583992] usb 2-1.2: Manufacturer: Xiaomi [23438.583993] usb 2-1.2: SerialNumber: ... [23438.604975] colord-sane[22871]: segfault at 0 ip 00007f6fcc61d064 sp 00007ffd0e431890 error 4 in libpmxnet-rxesg.so[7f6fcc61b000+5000] [24495.263489] usb 2-1.2: USB disconnect, device number 9 [24495.291996] colord-sane[24073]: segfault at 0 ip 00007fce879a5064 sp 00007fff6a0f7310 error 4 in libpmxnet-rxesg.so[7fce879a3000+5000] [25490.550472] usb 2-1.2: new high-speed USB device number 10 using ehci-pci [25490.660296] usb 2-1.2: New USB device found, idVendor=2717, idProduct=ff40 [25490.660299] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [25490.660301] usb 2-1.2: Product: MI MAX 2 [25490.660302] usb 2-1.2: Manufacturer: Xiaomi [25490.660304] usb 2-1.2: SerialNumber: ... [25490.688387] colord-sane[24538]: segfault at 0 ip 00007f3d3966d064 sp 00007ffc5070eee0 error 4 in libpmxnet-rxesg.so[7f3d3966b000+5000] [25517.720360] usb 2-1.2: USB disconnect, device number 10 [25517.742899] colord-sane[24586]: segfault at 0 ip 00007f9b4abef064 sp 00007ffebc722e50 error 4 in libpmxnet-rxesg.so[7f9b4abed000+5000] [25518.094513] usb 2-1.2: new high-speed USB device number 11 using ehci-pci [25518.203729] usb 2-1.2: New USB device found, idVendor=2717, idProduct=ff40 [25518.203732] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [25518.203733] usb 2-1.2: Product: MI MAX 2 [25518.203735] usb 2-1.2: Manufacturer: Xiaomi [25518.203736] usb 2-1.2: SerialNumber: ... [25518.232038] colord-sane[24610]: segfault at 0 ip 00007f9a498c3064 sp 00007ffcde705a90 error 4 in libpmxnet-rxesg.so[7f9a498c1000+5000] [25935.286307] perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [25964.693242] usb 2-1.2: USB disconnect, device number 11 [25964.719350] show_signal_msg: 2 callbacks suppressed [25964.719352] colord-sane[24996]: segfault at 0 ip 00007fef131a4064 sp 00007ffeae86e760 error 4 in libpmxnet-rxesg.so[7fef131a2000+5000] [39452.558018] perf: interrupt took too long (3171 > 3136), lowering kernel.perf_event_max_sample_rate to 63000 [41629.046081] PM: suspend entry (deep) [41629.046083] PM: Syncing filesystems ... done. [41630.039282] Freezing user space processes ... (elapsed 0.006 seconds) done. [41630.046178] OOM killer disabled. [41630.046179] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [41630.047442] Suspending console(s) (use no_console_suspend to debug) [41630.047950] serial 00:02: disabled [41630.070133] sd 0:0:1:0: [sdb] Synchronizing SCSI cache [41630.070187] sd 0:0:0:0: [sda] Synchronizing SCSI cache [41630.070189] sd 2:0:0:0: [sdc] Synchronizing SCSI cache [41630.070340] sd 0:0:1:0: [sdb] Stopping disk [41630.070378] sd 2:0:0:0: [sdc] Stopping disk [41630.070484] sd 0:0:0:0: [sda] Stopping disk [41630.074370] sd 4:0:0:0: [sdd] Synchronizing SCSI cache [41630.074445] sd 4:0:0:0: [sdd] Stopping disk [41631.178675] ACPI: Preparing to enter system sleep state S3 [41631.180378] PM: Saving platform NVS memory [41631.180492] Disabling non-boot CPUs ... [41631.195451] smpboot: CPU 1 is now offline [41631.219509] smpboot: CPU 2 is now offline [41631.243533] smpboot: CPU 3 is now offline [41631.267700] smpboot: CPU 4 is now offline [41631.294471] IRQ 23: no longer affine to CPU5 [41631.294490] IRQ 30: no longer affine to CPU5 [41631.295494] smpboot: CPU 5 is now offline [41631.318462] IRQ 17: no longer affine to CPU6 [41631.318468] IRQ 18: no longer affine to CPU6 [41631.318486] IRQ 27: no longer affine to CPU6 [41631.319490] smpboot: CPU 6 is now offline [41631.342462] IRQ 26: no longer affine to CPU7 [41631.343469] smpboot: CPU 7 is now offline [41631.347620] ACPI: Low-level resume complete [41631.347669] PM: Restoring platform NVS memory [41631.349588] Enabling non-boot CPUs ... [41631.349647] x86: Booting SMP configuration: [41631.349648] smpboot: Booting Node 0 Processor 1 APIC 0x2 [41631.353500] cache: parent cpu1 should not be sleeping [41631.353837] CPU1 is up [41631.353870] smpboot: Booting Node 0 Processor 2 APIC 0x4 [41631.357740] cache: parent cpu2 should not be sleeping [41631.358098] CPU2 is up [41631.358138] smpboot: Booting Node 0 Processor 3 APIC 0x6 [41631.362038] cache: parent cpu3 should not be sleeping [41631.362436] CPU3 is up [41631.362471] smpboot: Booting Node 0 Processor 4 APIC 0x1 [41631.365465] cache: parent cpu4 should not be sleeping [41631.366229] CPU4 is up [41631.366253] smpboot: Booting Node 0 Processor 5 APIC 0x3 [41631.368699] cache: parent cpu5 should not be sleeping [41631.369149] CPU5 is up [41631.369187] smpboot: Booting Node 0 Processor 6 APIC 0x5 [41631.371929] cache: parent cpu6 should not be sleeping [41631.372407] CPU6 is up [41631.372441] smpboot: Booting Node 0 Processor 7 APIC 0x7 [41631.375181] cache: parent cpu7 should not be sleeping [41631.375685] CPU7 is up [41631.381835] ACPI: Waking up from system sleep state S3 [41631.400509] firewire_ohci 0000:04:02.0: Refused to change power state, currently in D3 [41631.460772] usb usb1: root hub lost power or was reset [41631.460842] usb usb2: root hub lost power or was reset [41631.460901] usb usb3: root hub lost power or was reset [41631.460904] usb usb4: root hub lost power or was reset [41631.460946] usb usb5: root hub lost power or was reset [41631.460951] usb usb6: root hub lost power or was reset [41631.461878] serial 00:02: activated [41631.464665] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported [41631.464755] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported [41631.464912] sd 0:0:0:0: [sda] Starting disk [41631.464913] sd 2:0:0:0: [sdc] Starting disk [41631.464914] sd 0:0:1:0: [sdb] Starting disk [41631.464917] sd 4:0:0:0: [sdd] Starting disk [41631.480521] pci 0000:03:00.0: enabling device (0000 -> 0003) [41631.480572] firewire_ohci 0000:04:02.0: failed to reset ohci card [41631.480576] dpm_run_callback(): pci_pm_resume+0x0/0xb0 returns -19 [41631.480577] PM: Device 0000:04:02.0 failed to resume async: error -19 [41631.596122] r8169 0000:07:00.0 enp7s0: link down [41631.778706] ata6: SATA link down (SStatus 0 SControl 300) [41631.789672] ata4: SATA link down (SStatus 0 SControl 300) [41631.808521] usb 2-1: reset high-speed USB device number 2 using ehci-pci [41631.820511] usb 1-1: reset high-speed USB device number 2 using ehci-pci [41631.936545] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [41631.938875] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41631.938878] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41631.938880] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41631.940520] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [41631.941440] ata5.00: configured for UDMA/133 [41631.950680] ata3.00: configured for UDMA/133 [41632.101588] ata2.00: SATA link down (SStatus 0 SControl 300) [41632.101602] ata2.01: SATA link down (SStatus 0 SControl 300) [41632.244571] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [41632.244585] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [41632.246989] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41632.246991] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41632.246993] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41632.250418] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41632.250421] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41632.250423] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [41632.260520] usb 2-1.7: reset full-speed USB device number 3 using ehci-pci [41632.272512] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci [41632.275010] ata1.00: configured for UDMA/133 [41632.280640] ata1.01: configured for UDMA/133 [41632.448511] usb 2-1.1: reset full-speed USB device number 4 using ehci-pci [41632.559740] OOM killer enabled. [41632.559742] Restarting tasks ... done. [41632.569080] PM: suspend exit [41632.926981] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [41632.960366] usb 2-1.1: usbfs: process 3384 (pcscd) did not claim interface 0 before use [41633.061880] r8169 0000:07:00.0 enp7s0: link down [41633.061972] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [41634.636172] r8169 0000:07:00.0 enp7s0: link up [41634.636181] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [67015.271102] perf: interrupt took too long (3968 > 3963), lowering kernel.perf_event_max_sample_rate to 50250 [125602.731015] usb 2-1.1: USB disconnect, device number 4 [125613.960658] usb 2-1.1: new full-speed USB device number 12 using ehci-pci [125614.070942] usb 2-1.1: New USB device found, idVendor=24dc, idProduct=0101 [125614.070945] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [125614.070947] usb 2-1.1: Product: JaCarta [125614.070949] usb 2-1.1: Manufacturer: ARDS [125614.070951] usb 2-1.1: SerialNumber: ... [168751.370377] PM: suspend entry (deep) [168751.370378] PM: Syncing filesystems ... done. [168752.805802] Freezing user space processes ... (elapsed 0.033 seconds) done. [168752.839162] OOM killer disabled. [168752.839163] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [168752.840858] Suspending console(s) (use no_console_suspend to debug) [168752.841682] serial 00:02: disabled [168752.854290] sd 0:0:1:0: [sdb] Synchronizing SCSI cache [168752.854412] sd 0:0:1:0: [sdb] Stopping disk [168752.858271] sd 0:0:0:0: [sda] Synchronizing SCSI cache [168752.870507] sd 4:0:0:0: [sdd] Synchronizing SCSI cache [168752.870526] sd 2:0:0:0: [sdc] Synchronizing SCSI cache [168752.870675] sd 2:0:0:0: [sdc] Stopping disk [168752.899432] sd 4:0:0:0: [sdd] Stopping disk [168753.493208] sd 0:0:0:0: [sda] Stopping disk [168753.990973] ACPI: Preparing to enter system sleep state S3 [168753.992806] PM: Saving platform NVS memory [168753.992961] Disabling non-boot CPUs ... [168754.007858] smpboot: CPU 1 is now offline [168754.039821] smpboot: CPU 2 is now offline [168754.063785] smpboot: CPU 3 is now offline [168754.087957] smpboot: CPU 4 is now offline [168754.110665] IRQ 17: no longer affine to CPU5 [168754.110682] IRQ 24: no longer affine to CPU5 [168754.110685] IRQ 30: no longer affine to CPU5 [168754.111689] smpboot: CPU 5 is now offline [168754.134648] IRQ 19: no longer affine to CPU6 [168754.134667] IRQ 27: no longer affine to CPU6 [168754.135684] smpboot: CPU 6 is now offline [168754.158638] IRQ 26: no longer affine to CPU7 [168754.159656] smpboot: CPU 7 is now offline [168754.163330] ACPI: Low-level resume complete [168754.163379] PM: Restoring platform NVS memory [168754.165302] Enabling non-boot CPUs ... [168754.165389] x86: Booting SMP configuration: [168754.165390] smpboot: Booting Node 0 Processor 1 APIC 0x2 [168754.169253] cache: parent cpu1 should not be sleeping [168754.169601] CPU1 is up [168754.169636] smpboot: Booting Node 0 Processor 2 APIC 0x4 [168754.173491] cache: parent cpu2 should not be sleeping [168754.173859] CPU2 is up [168754.173905] smpboot: Booting Node 0 Processor 3 APIC 0x6 [168754.177776] cache: parent cpu3 should not be sleeping [168754.178173] CPU3 is up [168754.178219] smpboot: Booting Node 0 Processor 4 APIC 0x1 [168754.181200] cache: parent cpu4 should not be sleeping [168754.181977] CPU4 is up [168754.182001] smpboot: Booting Node 0 Processor 5 APIC 0x3 [168754.184440] cache: parent cpu5 should not be sleeping [168754.184913] CPU5 is up [168754.184954] smpboot: Booting Node 0 Processor 6 APIC 0x5 [168754.187696] cache: parent cpu6 should not be sleeping [168754.188182] CPU6 is up [168754.188219] smpboot: Booting Node 0 Processor 7 APIC 0x7 [168754.190970] cache: parent cpu7 should not be sleeping [168754.191474] CPU7 is up [168754.197648] ACPI: Waking up from system sleep state S3 [168754.216699] firewire_ohci 0000:04:02.0: Refused to change power state, currently in D3 [168754.276968] usb usb1: root hub lost power or was reset [168754.277034] usb usb2: root hub lost power or was reset [168754.277049] usb usb3: root hub lost power or was reset [168754.277051] usb usb4: root hub lost power or was reset [168754.277231] usb usb5: root hub lost power or was reset [168754.277235] usb usb6: root hub lost power or was reset [168754.279899] serial 00:02: activated [168754.280855] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported [168754.280946] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported [168754.281045] sd 0:0:0:0: [sda] Starting disk [168754.281046] sd 0:0:1:0: [sdb] Starting disk [168754.281047] sd 2:0:0:0: [sdc] Starting disk [168754.281048] sd 4:0:0:0: [sdd] Starting disk [168754.296695] pci 0000:03:00.0: enabling device (0000 -> 0003) [168754.296736] firewire_ohci 0000:04:02.0: failed to reset ohci card [168754.296741] dpm_run_callback(): pci_pm_resume+0x0/0xb0 returns -19 [168754.296742] PM: Device 0000:04:02.0 failed to resume async: error -19 [168754.430358] r8169 0000:07:00.0 enp7s0: link down [168754.594930] ata6: SATA link down (SStatus 0 SControl 300) [168754.601724] ata4: SATA link down (SStatus 0 SControl 300) [168754.624716] usb 2-1: reset high-speed USB device number 2 using ehci-pci [168754.632686] usb 1-1: reset high-speed USB device number 2 using ehci-pci [168754.756690] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [168754.757619] ata5.00: configured for UDMA/133 [168754.760737] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [168754.763065] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168754.763077] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168754.763079] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168754.771341] ata3.00: configured for UDMA/133 [168754.917756] ata2.00: SATA link down (SStatus 0 SControl 300) [168754.917776] ata2.01: SATA link down (SStatus 0 SControl 300) [168755.076686] usb 2-1.7: reset full-speed USB device number 3 using ehci-pci [168755.076739] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [168755.076753] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [168755.079158] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168755.079160] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168755.079162] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168755.082609] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168755.082612] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168755.082614] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [168755.084683] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci [168755.107186] ata1.00: configured for UDMA/133 [168755.112797] ata1.01: configured for UDMA/133 [168755.264675] usb 2-1.1: reset full-speed USB device number 12 using ehci-pci [168755.376022] OOM killer enabled. [168755.376023] Restarting tasks ... done. [168755.380976] PM: suspend exit [168755.468983] usb 2-1.2: new high-speed USB device number 13 using ehci-pci [168755.581888] usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0608 [168755.581890] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=... [168755.581891] usb 2-1.2: Product: USB2.0 Hub [168755.582295] hub 2-1.2:1.0: USB hub found [168755.582640] hub 2-1.2:1.0: 4 ports detected [168755.776647] usb 2-1.1: usbfs: process 2249 (pcscd) did not claim interface 0 before use [168755.981973] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [168756.114024] r8169 0000:07:00.0 enp7s0: link down [168756.114165] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [168757.784955] r8169 0000:07:00.0 enp7s0: link up [168757.784965] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [215982.188374] PM: suspend entry (deep) [215982.188376] PM: Syncing filesystems ... done. [215984.798303] Freezing user space processes ... (elapsed 0.017 seconds) done. [215984.815637] OOM killer disabled. [215984.815638] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [215984.817229] Suspending console(s) (use no_console_suspend to debug) [215984.817863] serial 00:02: disabled [215984.847076] sd 0:0:0:0: [sda] Synchronizing SCSI cache [215984.847077] sd 0:0:1:0: [sdb] Synchronizing SCSI cache [215984.847184] sd 4:0:0:0: [sdd] Synchronizing SCSI cache [215984.847205] sd 0:0:1:0: [sdb] Stopping disk [215984.847280] sd 4:0:0:0: [sdd] Stopping disk [215984.847339] sd 0:0:0:0: [sda] Stopping disk [215984.850854] sd 2:0:0:0: [sdc] Synchronizing SCSI cache [215984.850993] sd 2:0:0:0: [sdc] Stopping disk [215985.931694] ACPI: Preparing to enter system sleep state S3 [215985.933410] PM: Saving platform NVS memory [215985.933552] Disabling non-boot CPUs ... [215985.948468] smpboot: CPU 1 is now offline [215985.972440] smpboot: CPU 2 is now offline [215985.996384] smpboot: CPU 3 is now offline [215986.020553] smpboot: CPU 4 is now offline [215986.043285] IRQ 24: no longer affine to CPU5 [215986.043289] IRQ 30: no longer affine to CPU5 [215986.044294] smpboot: CPU 5 is now offline [215986.067247] IRQ 17: no longer affine to CPU6 [215986.067252] IRQ 18: no longer affine to CPU6 [215986.067257] IRQ 23: no longer affine to CPU6 [215986.067261] IRQ 27: no longer affine to CPU6 [215986.068267] smpboot: CPU 6 is now offline [215986.091254] IRQ 26: no longer affine to CPU7 [215986.092261] smpboot: CPU 7 is now offline [215986.095779] ACPI: Low-level resume complete [215986.095828] PM: Restoring platform NVS memory [215986.097781] Enabling non-boot CPUs ... [215986.097843] x86: Booting SMP configuration: [215986.097845] smpboot: Booting Node 0 Processor 1 APIC 0x2 [215986.101702] cache: parent cpu1 should not be sleeping [215986.102051] CPU1 is up [215986.102087] smpboot: Booting Node 0 Processor 2 APIC 0x4 [215986.105978] cache: parent cpu2 should not be sleeping [215986.106353] CPU2 is up [215986.106387] smpboot: Booting Node 0 Processor 3 APIC 0x6 [215986.110270] cache: parent cpu3 should not be sleeping [215986.110675] CPU3 is up [215986.110717] smpboot: Booting Node 0 Processor 4 APIC 0x1 [215986.113702] cache: parent cpu4 should not be sleeping [215986.114481] CPU4 is up [215986.114506] smpboot: Booting Node 0 Processor 5 APIC 0x3 [215986.116948] cache: parent cpu5 should not be sleeping [215986.117420] CPU5 is up [215986.117463] smpboot: Booting Node 0 Processor 6 APIC 0x5 [215986.120208] cache: parent cpu6 should not be sleeping [215986.120696] CPU6 is up [215986.120732] smpboot: Booting Node 0 Processor 7 APIC 0x7 [215986.123487] cache: parent cpu7 should not be sleeping [215986.124007] CPU7 is up [215986.130166] ACPI: Waking up from system sleep state S3 [215986.149617] firewire_ohci 0000:04:02.0: Refused to change power state, currently in D3 [215986.209810] usb usb1: root hub lost power or was reset [215986.209869] usb usb2: root hub lost power or was reset [215986.209901] usb usb3: root hub lost power or was reset [215986.209902] usb usb4: root hub lost power or was reset [215986.209955] usb usb5: root hub lost power or was reset [215986.209967] usb usb6: root hub lost power or was reset [215986.213044] serial 00:02: activated [215986.213696] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported [215986.213783] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported [215986.221356] sd 0:0:0:0: [sda] Starting disk [215986.221358] sd 0:0:1:0: [sdb] Starting disk [215986.221359] sd 2:0:0:0: [sdc] Starting disk [215986.221371] sd 4:0:0:0: [sdd] Starting disk [215986.229290] pci 0000:03:00.0: enabling device (0000 -> 0003) [215986.229335] firewire_ohci 0000:04:02.0: failed to reset ohci card [215986.229339] dpm_run_callback(): pci_pm_resume+0x0/0xb0 returns -19 [215986.229340] PM: Device 0000:04:02.0 failed to resume async: error -19 [215986.338872] r8169 0000:07:00.0 enp7s0: link down [215986.534343] ata4: SATA link down (SStatus 0 SControl 300) [215986.535501] ata6: SATA link down (SStatus 0 SControl 300) [215986.557276] usb 2-1: reset high-speed USB device number 2 using ehci-pci [215986.569284] usb 1-1: reset high-speed USB device number 2 using ehci-pci [215986.693308] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [215986.695634] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215986.695637] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215986.695639] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215986.697292] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [215986.698228] ata5.00: configured for UDMA/133 [215986.706515] ata3.00: configured for UDMA/133 [215986.850374] ata2.00: SATA link down (SStatus 0 SControl 300) [215986.850387] ata2.01: SATA link down (SStatus 0 SControl 300) [215987.009280] usb 2-1.7: reset full-speed USB device number 3 using ehci-pci [215987.009338] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [215987.009351] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [215987.011753] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215987.011755] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215987.011756] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215987.015218] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215987.015221] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215987.015223] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [215987.021275] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci [215987.039773] ata1.00: configured for UDMA/133 [215987.045392] ata1.01: configured for UDMA/133 [215987.197274] usb 2-1.1: reset full-speed USB device number 12 using ehci-pci [215987.385278] usb 2-1.2: reset high-speed USB device number 13 using ehci-pci [215987.604665] OOM killer enabled. [215987.604666] Restarting tasks ... done. [215987.607630] PM: suspend exit [215987.874403] r8169 0000:07:00.0 enp7s0: link up [215988.005721] usb 2-1.1: usbfs: process 2249 (pcscd) did not claim interface 0 before use [215988.535115] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [215988.678644] r8169 0000:07:00.0 enp7s0: link down [215988.678743] r8169 0000:07:00.0 enp7s0: link down [215988.678768] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [215990.223327] r8169 0000:07:00.0 enp7s0: link up [215990.223410] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [258206.994723] PM: suspend entry (deep) [258206.994725] PM: Syncing filesystems ... done. [258209.956642] Freezing user space processes ... (elapsed 0.289 seconds) done. [258210.245669] OOM killer disabled. [258210.245669] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [258210.247362] Suspending console(s) (use no_console_suspend to debug) [258210.248211] serial 00:02: disabled [258210.269906] sd 2:0:0:0: [sdc] Synchronizing SCSI cache [258210.269969] sd 0:0:0:0: [sda] Synchronizing SCSI cache [258210.269970] sd 0:0:1:0: [sdb] Synchronizing SCSI cache [258210.270052] sd 2:0:0:0: [sdc] Stopping disk [258210.270105] sd 0:0:0:0: [sda] Stopping disk [258210.270246] sd 0:0:1:0: [sdb] Stopping disk [258210.273904] sd 4:0:0:0: [sdd] Synchronizing SCSI cache [258210.322476] sd 4:0:0:0: [sdd] Stopping disk [258211.402572] ACPI: Preparing to enter system sleep state S3 [258211.404319] PM: Saving platform NVS memory [258211.404460] Disabling non-boot CPUs ... [258211.419510] smpboot: CPU 1 is now offline [258211.443473] smpboot: CPU 2 is now offline [258211.467459] smpboot: CPU 3 is now offline [258211.491616] smpboot: CPU 4 is now offline [258211.514329] IRQ 24: no longer affine to CPU5 [258211.514334] IRQ 30: no longer affine to CPU5 [258211.515338] smpboot: CPU 5 is now offline [258211.538306] IRQ 17: no longer affine to CPU6 [258211.538312] IRQ 23: no longer affine to CPU6 [258211.538316] IRQ 27: no longer affine to CPU6 [258211.539322] smpboot: CPU 6 is now offline [258211.562277] IRQ 18: no longer affine to CPU7 [258211.562317] IRQ 26: no longer affine to CPU7 [258211.563334] smpboot: CPU 7 is now offline [258211.566813] ACPI: Low-level resume complete [258211.566863] PM: Restoring platform NVS memory [258211.568775] Enabling non-boot CPUs ... [258211.568863] x86: Booting SMP configuration: [258211.568864] smpboot: Booting Node 0 Processor 1 APIC 0x2 [258211.572719] cache: parent cpu1 should not be sleeping [258211.573078] CPU1 is up [258211.573130] smpboot: Booting Node 0 Processor 2 APIC 0x4 [258211.577007] cache: parent cpu2 should not be sleeping [258211.577389] CPU2 is up [258211.577422] smpboot: Booting Node 0 Processor 3 APIC 0x6 [258211.581279] cache: parent cpu3 should not be sleeping [258211.581691] CPU3 is up [258211.581728] smpboot: Booting Node 0 Processor 4 APIC 0x1 [258211.584707] cache: parent cpu4 should not be sleeping [258211.585493] CPU4 is up [258211.585518] smpboot: Booting Node 0 Processor 5 APIC 0x3 [258211.587965] cache: parent cpu5 should not be sleeping [258211.588451] CPU5 is up [258211.588490] smpboot: Booting Node 0 Processor 6 APIC 0x5 [258211.591233] cache: parent cpu6 should not be sleeping [258211.591727] CPU6 is up [258211.591762] smpboot: Booting Node 0 Processor 7 APIC 0x7 [258211.594495] cache: parent cpu7 should not be sleeping [258211.595019] CPU7 is up [258211.601225] ACPI: Waking up from system sleep state S3 [258211.620353] firewire_ohci 0000:04:02.0: Refused to change power state, currently in D3 [258211.680669] usb usb1: root hub lost power or was reset [258211.680750] usb usb2: root hub lost power or was reset [258211.680864] usb usb3: root hub lost power or was reset [258211.680872] usb usb4: root hub lost power or was reset [258211.680912] usb usb5: root hub lost power or was reset [258211.680913] usb usb6: root hub lost power or was reset [258211.683387] serial 00:02: activated [258211.684587] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported [258211.684639] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported [258211.684719] sd 0:0:0:0: [sda] Starting disk [258211.684721] sd 0:0:1:0: [sdb] Starting disk [258211.684750] sd 2:0:0:0: [sdc] Starting disk [258211.684793] sd 4:0:0:0: [sdd] Starting disk [258211.700345] pci 0000:03:00.0: enabling device (0000 -> 0003) [258211.700390] firewire_ohci 0000:04:02.0: failed to reset ohci card [258211.700395] dpm_run_callback(): pci_pm_resume+0x0/0xb0 returns -19 [258211.700395] PM: Device 0000:04:02.0 failed to resume async: error -19 [258211.814007] r8169 0000:07:00.0 enp7s0: link down [258211.998560] ata6: SATA link down (SStatus 0 SControl 300) [258212.009434] ata4: SATA link down (SStatus 0 SControl 300) [258212.028339] usb 2-1: reset high-speed USB device number 2 using ehci-pci [258212.036342] usb 1-1: reset high-speed USB device number 2 using ehci-pci [258212.152364] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [258212.154685] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.154688] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.154690] ata3.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.160335] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [258212.161257] ata5.00: configured for UDMA/133 [258212.167673] ata3.00: configured for UDMA/133 [258212.321508] ata2.00: SATA link down (SStatus 0 SControl 300) [258212.321523] ata2.01: SATA link down (SStatus 0 SControl 300) [258212.468392] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [258212.468407] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [258212.470813] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.470816] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.470818] ata1.01: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.474343] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.474346] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.474348] ata1.00: ACPI cmd ef/XX:XX:XX:XX:XX:XX (SET FEATURES) filtered out [258212.480341] usb 2-1.7: reset full-speed USB device number 3 using ehci-pci [258212.488340] usb 1-1.5: reset full-speed USB device number 3 using ehci-pci [258212.498831] ata1.00: configured for UDMA/133 [258212.504462] ata1.01: configured for UDMA/133 [258212.668330] usb 2-1.1: reset full-speed USB device number 12 using ehci-pci [258212.856339] usb 2-1.2: reset high-speed USB device number 13 using ehci-pci [258213.075827] OOM killer enabled. [258213.075828] Restarting tasks ... done. [258213.081948] PM: suspend exit [258213.400176] r8169 0000:07:00.0 enp7s0: link up [258213.478012] usb 2-1.1: usbfs: process 2249 (pcscd) did not claim interface 0 before use [258216.796913] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [258216.957711] r8169 0000:07:00.0 enp7s0: link down [258216.957745] r8169 0000:07:00.0 enp7s0: link down [258216.957886] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [258218.529939] r8169 0000:07:00.0 enp7s0: link up [258218.529952] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [258748.028138] usb 2-1.1: USB disconnect, device number 12 [258775.900005] usb 2-1.1: new full-speed USB device number 14 using ehci-pci [258776.010193] usb 2-1.1: New USB device found, idVendor=24dc, idProduct=0101 [258776.010196] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [258776.010197] usb 2-1.1: Product: JaCarta [258776.010198] usb 2-1.1: Manufacturer: ARDS [258776.010199] usb 2-1.1: SerialNumber: ... [293696.323907] r8169 0000:07:00.0 enp7s0: link down [293701.030152] r8169 0000:07:00.0 enp7s0: link up [293708.244820] r8169 0000:07:00.0 enp7s0: link down [293710.635142] r8169 0000:07:00.0 enp7s0: link up [293727.663374] r8169 0000:07:00.0 enp7s0: link down [293729.425694] r8169 0000:07:00.0 enp7s0: link up [297877.304519] usb 2-1.2.1: new high-speed USB device number 15 using ehci-pci [297877.561853] usb 2-1.2.1: New USB device found, idVendor=0bda, idProduct=58b0 [297877.561857] usb 2-1.2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [297877.561859] usb 2-1.2.1: Product: FULL HD 1080P Webcam [297877.561861] usb 2-1.2.1: Manufacturer: Generic [297877.561862] usb 2-1.2.1: SerialNumber: ... [297878.440862] colord-sane[9104]: segfault at 0 ip 00007f6452bef064 sp 00007ffc83d72340 error 4 in libpmxnet-rxesg.so[7f6452bed000+5000] [297878.592375] media: Linux media interface: v0.10 [297878.602090] Linux video capture interface: v2.00 [297886.276046] usbcore: registered new interface driver snd-usb-audio [297886.277265] uvcvideo: Found UVC 1.00 device FULL HD 1080P Webcam (0bda:58b0) [297886.288953] uvcvideo 2-1.2.1:1.0: Entity type for entity Extension 4 was not initialized! [297886.288957] uvcvideo 2-1.2.1:1.0: Entity type for entity Processing 2 was not initialized! [297886.288958] uvcvideo 2-1.2.1:1.0: Entity type for entity Camera 1 was not initialized! [297886.289177] input: FULL HD 1080P Webcam: FULL HD 1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input21 [297886.289354] usbcore: registered new interface driver uvcvideo [297886.289355] USB Video Class driver (1.1.1) [297886.294029] colord-sane[9123]: segfault at 0 ip 00007fe4fdb23064 sp 00007ffe5f1bfc20 error 4 in libpmxnet-rxesg.so[7fe4fdb21000+5000] [298353.036976] webcamoid[11003]: segfault at 10 ip 00007fa9d0b97ff3 sp 00007ffdef8a6440 error 4 in libQt5Core.so.5.9.5[7fa9d08de000+53b000] [298453.985830] webcamoid[11213]: segfault at 10 ip 00007fe7d6d26ff3 sp 00007fffe9762150 error 4 in libQt5Core.so.5.9.5[7fe7d6a6d000+53b000] [298514.407032] usb 2-1.2.1: USB disconnect, device number 15 [298529.982543] usb 5-1: new high-speed USB device number 2 using xhci_hcd [298530.282308] usb 5-1: New USB device found, idVendor=0bda, idProduct=58b0 [298530.282312] usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [298530.282314] usb 5-1: Product: FULL HD 1080P Webcam [298530.282316] usb 5-1: Manufacturer: Generic [298530.282318] usb 5-1: SerialNumber: ... [298530.291187] uvcvideo: Found UVC 1.00 device FULL HD 1080P Webcam (0bda:58b0) [298530.303312] uvcvideo 5-1:1.0: Entity type for entity Extension 4 was not initialized! [298530.303315] uvcvideo 5-1:1.0: Entity type for entity Processing 2 was not initialized! [298530.303317] uvcvideo 5-1:1.0: Entity type for entity Camera 1 was not initialized! [298530.303562] input: FULL HD 1080P Webcam: FULL HD 1 as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-1/5-1:1.0/input/input22 [298630.091647] webcamoid[12767]: segfault at 10 ip 00007fe5d095fff3 sp 00007ffe932ff6f0 error 4 in libQt5Core.so.5.9.5[7fe5d06a6000+53b000] [298854.136796] usbcore: deregistering interface driver uvcvideo [298860.714425] media: Linux media interface: v0.10 [298860.720298] Linux video capture interface: v2.00 [298860.849551] uvcvideo: Found UVC 1.00 device FULL HD 1080P Webcam (0bda:58b0) [298860.861719] uvcvideo 5-1:1.0: Entity type for entity Extension 4 was not initialized! [298860.861721] uvcvideo 5-1:1.0: Entity type for entity Processing 2 was not initialized! [298860.861722] uvcvideo 5-1:1.0: Entity type for entity Camera 1 was not initialized! [298860.861830] input: FULL HD 1080P Webcam: FULL HD 1 as /devices/pci0000:00/0000:00:1c.5/0000:06:00.0/usb5/5-1/5-1:1.0/input/input23 [298860.861914] usbcore: registered new interface driver uvcvideo [298860.861915] USB Video Class driver (1.1.1) [298867.761590] webcamoid[14243]: segfault at 10 ip 00007fea8dee4ff3 sp 00007ffec7190c20 error 4 in libQt5Core.so.5.9.5[7fea8dc2b000+53b000] [299505.006129] usb 5-1: USB disconnect, device number 2 [299514.414043] usb 2-1.2.1: new high-speed USB device number 16 using ehci-pci [299514.672052] usb 2-1.2.1: New USB device found, idVendor=0bda, idProduct=58b0 [299514.672055] usb 2-1.2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [299514.672057] usb 2-1.2.1: Product: FULL HD 1080P Webcam [299514.672059] usb 2-1.2.1: Manufacturer: Generic [299514.672061] usb 2-1.2.1: SerialNumber: ... [299514.676310] uvcvideo: Found UVC 1.00 device FULL HD 1080P Webcam (0bda:58b0) [299514.687541] uvcvideo 2-1.2.1:1.0: Entity type for entity Extension 4 was not initialized! [299514.687544] uvcvideo 2-1.2.1:1.0: Entity type for entity Processing 2 was not initialized! [299514.687546] uvcvideo 2-1.2.1:1.0: Entity type for entity Camera 1 was not initialized! [299514.687711] input: FULL HD 1080P Webcam: FULL HD 1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input24 [299530.595063] usb 2-1.2.1: USB disconnect, device number 16 [299542.317911] usb 2-1.2.1: new high-speed USB device number 17 using ehci-pci [299542.575986] usb 2-1.2.1: New USB device found, idVendor=0bda, idProduct=58b0 [299542.575990] usb 2-1.2.1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [299542.575992] usb 2-1.2.1: Product: FULL HD 1080P Webcam [299542.575994] usb 2-1.2.1: Manufacturer: Generic [299542.575995] usb 2-1.2.1: SerialNumber: ... [299542.580113] uvcvideo: Found UVC 1.00 device FULL HD 1080P Webcam (0bda:58b0) [299542.591336] uvcvideo 2-1.2.1:1.0: Entity type for entity Extension 4 was not initialized! [299542.591340] uvcvideo 2-1.2.1:1.0: Entity type for entity Processing 2 was not initialized! [299542.591342] uvcvideo 2-1.2.1:1.0: Entity type for entity Camera 1 was not initialized! [299542.591523] input: FULL HD 1080P Webcam: FULL HD 1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input25 [299621.775717] webcamoid[20942]: segfault at 10 ip 00007f00edeffff3 sp 00007ffe89d85a50 error 4 in libQt5Core.so.5.9.5[7f00edc46000+53b000] [299762.324799] traps: chromium-browse[21512] trap int3 ip:56132438dd0a sp:7ffdd7f42530 error:0 in chromium-browser[56132313e000+903c000] [299762.442084] traps: chromium-browse[21495] trap int3 ip:55586d6e6195 sp:7fffdcb5f7b0 error:0 in chromium-browser[5558685dd000+903c000] [299768.864071] traps: chromium-browse[21676] trap int3 ip:55fcf2021d0a sp:7ffe0a7c2940 error:0 in chromium-browser[55fcf0dd2000+903c000] [299768.978996] traps: chromium-browse[21640] trap int3 ip:55fac7924195 sp:7fffbee161b0 error:0 in chromium-browser[55fac281b000+903c000] [299954.137359] usb 2-1.2.1: USB disconnect, device number 17 [299968.092511] usb 2-1.1: USB disconnect, device number 14 [299970.652494] usb 2-1.2: USB disconnect, device number 13 [299974.204728] usb 2-1.1: new high-speed USB device number 18 using ehci-pci [299974.462843] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=58b0 [299974.462846] usb 2-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [299974.462849] usb 2-1.1: Product: FULL HD 1080P Webcam [299974.462850] usb 2-1.1: Manufacturer: Generic [299974.462852] usb 2-1.1: SerialNumber: ... [299974.466981] uvcvideo: Found UVC 1.00 device FULL HD 1080P Webcam (0bda:58b0) [299974.478339] uvcvideo 2-1.1:1.0: Entity type for entity Extension 4 was not initialized! [299974.478344] uvcvideo 2-1.1:1.0: Entity type for entity Processing 2 was not initialized! [299974.478347] uvcvideo 2-1.1:1.0: Entity type for entity Camera 1 was not initialized! [299974.478538] input: FULL HD 1080P Webcam: FULL HD 1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input26 [300432.119755] r8169 0000:07:00.0: invalid short VPD tag 00 at offset 1