[ 0.000000] microcode: microcode updated early to revision 0x46, date = 2021-01-27 [ 0.000000] Linux version 5.13.0-35-generic (XXX@XXX) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #40~20.04.1-Ubuntu SMP Mon Mar 7 09:18:32 UTC 2022 (Ubuntu 5.13.0-35.40~20.04.1-generic 5.13.19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-35-generic root=UUID=HASH_DA8-34A8-3B1A-351E-CC2B518D961D ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000000010ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000110000-0x00000000da376fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da377000-0x00000000db6c0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db6c1000-0x00000000dbefefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbeff000-0x00000000dbfd0fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dbfd1000-0x00000000dbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xd3ff5018-0xd4014a57] usable ==> usable [ 0.000000] e820: update [mem 0xd3ff5018-0xd4014a57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000c0000-0x000000000010ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000110000-0x00000000d3ff5017] usable [ 0.000000] reserve setup_data: [mem 0x00000000d3ff5018-0x00000000d4014a57] usable [ 0.000000] reserve setup_data: [mem 0x00000000d4014a58-0x00000000da376fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000da377000-0x00000000db6c0fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000db6c1000-0x00000000dbefefff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000dbeff000-0x00000000dbfd0fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000dbfd1000-0x00000000dbffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041fffffff] usable [ 0.000000] efi: EFI v2.31 by EDK II BIOS ID: [ 0.000000] efi: ACPI=0xdbfd0000 ACPI 2.0=0xdbfd0014 SMBIOS=0xdb6c0000 MOKvar=0xd404a000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Hewlett-Packard HP Z440 Workstation/212B, BIOS M60 v01.65 11/19/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3492.121 MHz processor [ 0.000457] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000459] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000463] last_pfn = 0x420000 max_arch_pfn = 0x400000000 [ 0.000597] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001445] last_pfn = 0xdc000 max_arch_pfn = 0x400000000 [ 0.007461] e820: update [mem 0xd404a000-0xd404afff] usable ==> reserved [ 0.007494] Using GB pages for direct mapping [ 0.007642] secureboot: Secure boot disabled [ 0.007642] RAMDISK: [mem 0x39c46000-0x3fffdfff] [ 0.007648] ACPI: Early table checksum verification disabled [ 0.007650] ACPI: RSDP 0x00000000DBFD0014 000024 (v02 HPQOEM) [ 0.007654] ACPI: XSDT 0x00000000DBFCF0E8 00009C (v01 HPQOEM SLIC-WKS 00000000 01000013) [ 0.007658] ACPI: FACP 0x00000000DBFCA000 0000F4 (v04 HPQOEM SLIC-WKS 00000000 INTL 20091013) [ 0.007663] ACPI: DSDT 0x00000000DBF98000 021AB8 (v02 HPQOEM SLIC-WKS 00000003 INTL 20091013) [ 0.007666] ACPI: FACS 0x00000000DBC00000 000040 [ 0.007668] ACPI: TCPA 0x00000000DBFCE000 000032 (v02 HPQOEM EDK2 00000002 01000013) [ 0.007670] ACPI: SSDT 0x00000000DBFCD000 0003C2 (v01 HPQOEM TcgTable 00001000 INTL 20130328) [ 0.007673] ACPI: SSDT 0x00000000DBFCC000 000E58 (v01 COMPAQ Plat_Wmi 00000001 INTL 20130328) [ 0.007675] ACPI: UEFI 0x00000000DBECF000 000042 (v01 00000000 00000000) [ 0.007678] ACPI: BDAT 0x00000000DBFCB000 000030 (v01 HPQOEM SLIC-WKS 00000000 INTL 20091013) [ 0.007680] ACPI: HPET 0x00000000DBFC7000 000038 (v01 HPQOEM SLIC-WKS 00000001 INTL 20091013) [ 0.007683] ACPI: APIC 0x00000000DBFC6000 00085C (v02 HPQOEM SLIC-WKS 00000000 INTL 20091013) [ 0.007685] ACPI: MCFG 0x00000000DBFC3000 00003C (v01 HPQOEM SLIC-WKS 00000001 INTL 20091013) [ 0.007688] ACPI: PMCT 0x00000000DBFBF000 000064 (v01 HPQOEM SLIC-WKS 00000000 INTL 20091013) [ 0.007690] ACPI: WDDT 0x00000000DBFBA000 000040 (v01 HPQOEM SLIC-WKS 00000000 INTL 20091013) [ 0.007692] ACPI: SSDT 0x00000000DBF42000 05594B (v02 HPQOEM SSDT PM 00004000 INTL 20130328) [ 0.007695] ACPI: DMAR 0x00000000DBF41000 0000C0 (v01 HPQOEM SLIC-WKS 00000001 INTL 20091013) [ 0.007697] ACPI: ASF! 0x00000000DBF40000 000074 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.007700] ACPI: BGRT 0x00000000DBF3F000 000038 (v01 INTEL TIANO 00000001 MSFT 01000013) [ 0.007702] ACPI: Reserving FACP table memory at [mem 0xdbfca000-0xdbfca0f3] [ 0.007703] ACPI: Reserving DSDT table memory at [mem 0xdbf98000-0xdbfb9ab7] [ 0.007704] ACPI: Reserving FACS table memory at [mem 0xdbc00000-0xdbc0003f] [ 0.007705] ACPI: Reserving TCPA table memory at [mem 0xdbfce000-0xdbfce031] [ 0.007706] ACPI: Reserving SSDT table memory at [mem 0xdbfcd000-0xdbfcd3c1] [ 0.007707] ACPI: Reserving SSDT table memory at [mem 0xdbfcc000-0xdbfcce57] [ 0.007707] ACPI: Reserving UEFI table memory at [mem 0xdbecf000-0xdbecf041] [ 0.007708] ACPI: Reserving BDAT table memory at [mem 0xdbfcb000-0xdbfcb02f] [ 0.007709] ACPI: Reserving HPET table memory at [mem 0xdbfc7000-0xdbfc7037] [ 0.007710] ACPI: Reserving APIC table memory at [mem 0xdbfc6000-0xdbfc685b] [ 0.007711] ACPI: Reserving MCFG table memory at [mem 0xdbfc3000-0xdbfc303b] [ 0.007711] ACPI: Reserving PMCT table memory at [mem 0xdbfbf000-0xdbfbf063] [ 0.007712] ACPI: Reserving WDDT table memory at [mem 0xdbfba000-0xdbfba03f] [ 0.007713] ACPI: Reserving SSDT table memory at [mem 0xdbf42000-0xdbf9794a] [ 0.007714] ACPI: Reserving DMAR table memory at [mem 0xdbf41000-0xdbf410bf] [ 0.007715] ACPI: Reserving ASF! table memory at [mem 0xdbf40000-0xdbf40073] [ 0.007715] ACPI: Reserving BGRT table memory at [mem 0xdbf3f000-0xdbf3f037] [ 0.007723] ACPI: Local APIC address 0xfee00000 [ 0.007789] No NUMA configuration found [ 0.007790] Faking a node at [mem 0x0000000000000000-0x000000041fffffff] [ 0.007798] NODE_DATA(0) allocated [mem 0x41ffd4000-0x41fffdfff] [ 0.008049] Zone ranges: [ 0.008050] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008051] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.008053] Normal [mem 0x0000000100000000-0x000000041fffffff] [ 0.008054] Device empty [ 0.008055] Movable zone start for each node [ 0.008057] Early memory node ranges [ 0.008058] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.008059] node 0: [mem 0x0000000000110000-0x00000000da376fff] [ 0.008060] node 0: [mem 0x00000000dbfd1000-0x00000000dbffffff] [ 0.008061] node 0: [mem 0x0000000100000000-0x000000041fffffff] [ 0.008063] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fffffff] [ 0.008064] On node 0 totalpages: 4170549 [ 0.008065] DMA zone: 64 pages used for memmap [ 0.008066] DMA zone: 1183 pages reserved [ 0.008067] DMA zone: 3983 pages, LIFO batch:0 [ 0.008068] DMA32 zone: 13903 pages used for memmap [ 0.008069] DMA32 zone: 889766 pages, LIFO batch:63 [ 0.008069] Normal zone: 51200 pages used for memmap [ 0.008070] Normal zone: 3276800 pages, LIFO batch:63 [ 0.008072] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008093] On node 0, zone DMA: 112 pages in unavailable ranges [ 0.013640] On node 0, zone DMA32: 7258 pages in unavailable ranges [ 0.034670] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.034808] ACPI: PM-Timer IO Port: 0x408 [ 0.034810] ACPI: Local APIC address 0xfee00000 [ 0.034820] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.034821] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.034822] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.034823] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.034823] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.034824] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.034825] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.034825] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.034826] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) [ 0.034827] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) [ 0.034827] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) [ 0.034828] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) [ 0.034829] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) [ 0.034829] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) [ 0.034830] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) [ 0.034831] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) [ 0.034831] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) [ 0.034832] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) [ 0.034833] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) [ 0.034833] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) [ 0.034834] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) [ 0.034835] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) [ 0.034835] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) [ 0.034836] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) [ 0.034836] ACPI: LAPIC_NMI (acpi_id[0x18] high level lint[0x1]) [ 0.034837] ACPI: LAPIC_NMI (acpi_id[0x19] high level lint[0x1]) [ 0.034838] ACPI: LAPIC_NMI (acpi_id[0x1a] high level lint[0x1]) [ 0.034838] ACPI: LAPIC_NMI (acpi_id[0x1b] high level lint[0x1]) [ 0.034839] ACPI: LAPIC_NMI (acpi_id[0x1c] high level lint[0x1]) [ 0.034840] ACPI: LAPIC_NMI (acpi_id[0x1d] high level lint[0x1]) [ 0.034840] ACPI: LAPIC_NMI (acpi_id[0x1e] high level lint[0x1]) [ 0.034841] ACPI: LAPIC_NMI (acpi_id[0x1f] high level lint[0x1]) [ 0.034842] ACPI: LAPIC_NMI (acpi_id[0x20] high level lint[0x1]) [ 0.034842] ACPI: LAPIC_NMI (acpi_id[0x21] high level lint[0x1]) [ 0.034843] ACPI: LAPIC_NMI (acpi_id[0x22] high level lint[0x1]) [ 0.034844] ACPI: LAPIC_NMI (acpi_id[0x23] high level lint[0x1]) [ 0.034844] ACPI: LAPIC_NMI (acpi_id[0x24] high level lint[0x1]) [ 0.034845] ACPI: LAPIC_NMI (acpi_id[0x25] high level lint[0x1]) [ 0.034845] ACPI: LAPIC_NMI (acpi_id[0x26] high level lint[0x1]) [ 0.034846] ACPI: LAPIC_NMI (acpi_id[0x27] high level lint[0x1]) [ 0.034847] ACPI: LAPIC_NMI (acpi_id[0x28] high level lint[0x1]) [ 0.034847] ACPI: LAPIC_NMI (acpi_id[0x29] high level lint[0x1]) [ 0.034848] ACPI: LAPIC_NMI (acpi_id[0x2a] high level lint[0x1]) [ 0.034849] ACPI: LAPIC_NMI (acpi_id[0x2b] high level lint[0x1]) [ 0.034849] ACPI: LAPIC_NMI (acpi_id[0x2c] high level lint[0x1]) [ 0.034850] ACPI: LAPIC_NMI (acpi_id[0x2d] high level lint[0x1]) [ 0.034851] ACPI: LAPIC_NMI (acpi_id[0x2e] high level lint[0x1]) [ 0.034851] ACPI: LAPIC_NMI (acpi_id[0x2f] high level lint[0x1]) [ 0.034852] ACPI: LAPIC_NMI (acpi_id[0x30] high level lint[0x1]) [ 0.034852] ACPI: LAPIC_NMI (acpi_id[0x31] high level lint[0x1]) [ 0.034853] ACPI: LAPIC_NMI (acpi_id[0x32] high level lint[0x1]) [ 0.034854] ACPI: LAPIC_NMI (acpi_id[0x33] high level lint[0x1]) [ 0.034854] ACPI: LAPIC_NMI (acpi_id[0x34] high level lint[0x1]) [ 0.034855] ACPI: LAPIC_NMI (acpi_id[0x35] high level lint[0x1]) [ 0.034856] ACPI: LAPIC_NMI (acpi_id[0x36] high level lint[0x1]) [ 0.034856] ACPI: LAPIC_NMI (acpi_id[0x37] high level lint[0x1]) [ 0.034857] ACPI: LAPIC_NMI (acpi_id[0x38] high level lint[0x1]) [ 0.034857] ACPI: LAPIC_NMI (acpi_id[0x39] high level lint[0x1]) [ 0.034858] ACPI: LAPIC_NMI (acpi_id[0x3a] high level lint[0x1]) [ 0.034859] ACPI: LAPIC_NMI (acpi_id[0x3b] high level lint[0x1]) [ 0.034859] ACPI: LAPIC_NMI (acpi_id[0x3c] high level lint[0x1]) [ 0.034860] ACPI: LAPIC_NMI (acpi_id[0x3d] high level lint[0x1]) [ 0.034861] ACPI: LAPIC_NMI (acpi_id[0x3e] high level lint[0x1]) [ 0.034861] ACPI: LAPIC_NMI (acpi_id[0x3f] high level lint[0x1]) [ 0.034862] ACPI: LAPIC_NMI (acpi_id[0x40] high level lint[0x1]) [ 0.034862] ACPI: LAPIC_NMI (acpi_id[0x41] high level lint[0x1]) [ 0.034863] ACPI: LAPIC_NMI (acpi_id[0x42] high level lint[0x1]) [ 0.034864] ACPI: LAPIC_NMI (acpi_id[0x43] high level lint[0x1]) [ 0.034864] ACPI: LAPIC_NMI (acpi_id[0x44] high level lint[0x1]) [ 0.034865] ACPI: LAPIC_NMI (acpi_id[0x45] high level lint[0x1]) [ 0.034866] ACPI: LAPIC_NMI (acpi_id[0x46] high level lint[0x1]) [ 0.034866] ACPI: LAPIC_NMI (acpi_id[0x47] high level lint[0x1]) [ 0.034867] ACPI: LAPIC_NMI (acpi_id[0x48] high level lint[0x1]) [ 0.034867] ACPI: LAPIC_NMI (acpi_id[0x49] high level lint[0x1]) [ 0.034868] ACPI: LAPIC_NMI (acpi_id[0x4a] high level lint[0x1]) [ 0.034869] ACPI: LAPIC_NMI (acpi_id[0x4b] high level lint[0x1]) [ 0.034869] ACPI: LAPIC_NMI (acpi_id[0x4c] high level lint[0x1]) [ 0.034870] ACPI: LAPIC_NMI (acpi_id[0x4d] high level lint[0x1]) [ 0.034871] ACPI: LAPIC_NMI (acpi_id[0x4e] high level lint[0x1]) [ 0.034871] ACPI: LAPIC_NMI (acpi_id[0x4f] high level lint[0x1]) [ 0.034872] ACPI: LAPIC_NMI (acpi_id[0x50] high level lint[0x1]) [ 0.034873] ACPI: LAPIC_NMI (acpi_id[0x51] high level lint[0x1]) [ 0.034873] ACPI: LAPIC_NMI (acpi_id[0x52] high level lint[0x1]) [ 0.034874] ACPI: LAPIC_NMI (acpi_id[0x53] high level lint[0x1]) [ 0.034874] ACPI: LAPIC_NMI (acpi_id[0x54] high level lint[0x1]) [ 0.034875] ACPI: LAPIC_NMI (acpi_id[0x55] high level lint[0x1]) [ 0.034876] ACPI: LAPIC_NMI (acpi_id[0x56] high level lint[0x1]) [ 0.034876] ACPI: LAPIC_NMI (acpi_id[0x57] high level lint[0x1]) [ 0.034877] ACPI: LAPIC_NMI (acpi_id[0x58] high level lint[0x1]) [ 0.034878] ACPI: LAPIC_NMI (acpi_id[0x59] high level lint[0x1]) [ 0.034878] ACPI: LAPIC_NMI (acpi_id[0x5a] high level lint[0x1]) [ 0.034879] ACPI: LAPIC_NMI (acpi_id[0x5b] high level lint[0x1]) [ 0.034880] ACPI: LAPIC_NMI (acpi_id[0x5c] high level lint[0x1]) [ 0.034880] ACPI: LAPIC_NMI (acpi_id[0x5d] high level lint[0x1]) [ 0.034881] ACPI: LAPIC_NMI (acpi_id[0x5e] high level lint[0x1]) [ 0.034881] ACPI: LAPIC_NMI (acpi_id[0x5f] high level lint[0x1]) [ 0.034882] ACPI: LAPIC_NMI (acpi_id[0x60] high level lint[0x1]) [ 0.034883] ACPI: LAPIC_NMI (acpi_id[0x61] high level lint[0x1]) [ 0.034883] ACPI: LAPIC_NMI (acpi_id[0x62] high level lint[0x1]) [ 0.034884] ACPI: LAPIC_NMI (acpi_id[0x63] high level lint[0x1]) [ 0.034885] ACPI: LAPIC_NMI (acpi_id[0x64] high level lint[0x1]) [ 0.034885] ACPI: LAPIC_NMI (acpi_id[0x65] high level lint[0x1]) [ 0.034886] ACPI: LAPIC_NMI (acpi_id[0x66] high level lint[0x1]) [ 0.034886] ACPI: LAPIC_NMI (acpi_id[0x67] high level lint[0x1]) [ 0.034887] ACPI: LAPIC_NMI (acpi_id[0x68] high level lint[0x1]) [ 0.034888] ACPI: LAPIC_NMI (acpi_id[0x69] high level lint[0x1]) [ 0.034888] ACPI: LAPIC_NMI (acpi_id[0x6a] high level lint[0x1]) [ 0.034889] ACPI: LAPIC_NMI (acpi_id[0x6b] high level lint[0x1]) [ 0.034890] ACPI: LAPIC_NMI (acpi_id[0x6c] high level lint[0x1]) [ 0.034890] ACPI: LAPIC_NMI (acpi_id[0x6d] high level lint[0x1]) [ 0.034891] ACPI: LAPIC_NMI (acpi_id[0x6e] high level lint[0x1]) [ 0.034892] ACPI: LAPIC_NMI (acpi_id[0x6f] high level lint[0x1]) [ 0.034892] ACPI: LAPIC_NMI (acpi_id[0x70] high level lint[0x1]) [ 0.034893] ACPI: LAPIC_NMI (acpi_id[0x71] high level lint[0x1]) [ 0.034893] ACPI: LAPIC_NMI (acpi_id[0x72] high level lint[0x1]) [ 0.034894] ACPI: LAPIC_NMI (acpi_id[0x73] high level lint[0x1]) [ 0.034895] ACPI: LAPIC_NMI (acpi_id[0x74] high level lint[0x1]) [ 0.034895] ACPI: LAPIC_NMI (acpi_id[0x75] high level lint[0x1]) [ 0.034896] ACPI: LAPIC_NMI (acpi_id[0x76] high level lint[0x1]) [ 0.034897] ACPI: LAPIC_NMI (acpi_id[0x77] high level lint[0x1]) [ 0.034897] ACPI: LAPIC_NMI (acpi_id[0x78] high level lint[0x1]) [ 0.034898] ACPI: LAPIC_NMI (acpi_id[0x79] high level lint[0x1]) [ 0.034898] ACPI: LAPIC_NMI (acpi_id[0x7a] high level lint[0x1]) [ 0.034899] ACPI: LAPIC_NMI (acpi_id[0x7b] high level lint[0x1]) [ 0.034900] ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1]) [ 0.034900] ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1]) [ 0.034901] ACPI: LAPIC_NMI (acpi_id[0x7d] high level lint[0x1]) [ 0.034902] ACPI: LAPIC_NMI (acpi_id[0x7e] high level lint[0x1]) [ 0.034902] ACPI: LAPIC_NMI (acpi_id[0x7f] high level lint[0x1]) [ 0.034903] ACPI: LAPIC_NMI (acpi_id[0x80] high level lint[0x1]) [ 0.034903] ACPI: LAPIC_NMI (acpi_id[0x81] high level lint[0x1]) [ 0.034904] ACPI: LAPIC_NMI (acpi_id[0x82] high level lint[0x1]) [ 0.034905] ACPI: LAPIC_NMI (acpi_id[0x83] high level lint[0x1]) [ 0.034905] ACPI: LAPIC_NMI (acpi_id[0x84] high level lint[0x1]) [ 0.034906] ACPI: LAPIC_NMI (acpi_id[0x85] high level lint[0x1]) [ 0.034907] ACPI: LAPIC_NMI (acpi_id[0x86] high level lint[0x1]) [ 0.034907] ACPI: LAPIC_NMI (acpi_id[0x87] high level lint[0x1]) [ 0.034908] ACPI: LAPIC_NMI (acpi_id[0x88] high level lint[0x1]) [ 0.034908] ACPI: LAPIC_NMI (acpi_id[0x89] high level lint[0x1]) [ 0.034909] ACPI: LAPIC_NMI (acpi_id[0x8a] high level lint[0x1]) [ 0.034910] ACPI: LAPIC_NMI (acpi_id[0x8b] high level lint[0x1]) [ 0.034910] ACPI: LAPIC_NMI (acpi_id[0x8c] high level lint[0x1]) [ 0.034911] ACPI: LAPIC_NMI (acpi_id[0x8d] high level lint[0x1]) [ 0.034912] ACPI: LAPIC_NMI (acpi_id[0x8f] high level lint[0x1]) [ 0.034921] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.034925] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47 [ 0.034928] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.034930] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.034932] ACPI: IRQ0 used by override. [ 0.034933] ACPI: IRQ9 used by override. [ 0.034936] Using ACPI (MADT) for SMP configuration information [ 0.034937] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.034942] efi_bgrt: Ignoring BGRT: invalid image address [ 0.034943] TSC deadline timer available [ 0.034944] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.034956] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.034957] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000bffff] [ 0.034958] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x0010ffff] [ 0.034960] PM: hibernation: Registered nosave memory: [mem 0xd3ff5000-0xd3ff5fff] [ 0.034961] PM: hibernation: Registered nosave memory: [mem 0xd4014000-0xd4014fff] [ 0.034962] PM: hibernation: Registered nosave memory: [mem 0xd404a000-0xd404afff] [ 0.034964] PM: hibernation: Registered nosave memory: [mem 0xda377000-0xdb6c0fff] [ 0.034964] PM: hibernation: Registered nosave memory: [mem 0xdb6c1000-0xdbefefff] [ 0.034965] PM: hibernation: Registered nosave memory: [mem 0xdbeff000-0xdbfd0fff] [ 0.034967] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xdfffffff] [ 0.034967] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.034968] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfed1bfff] [ 0.034969] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.034969] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xffffffff] [ 0.034971] [mem 0xf0000000-0xfed1bfff] available for PCI devices [ 0.034972] Booting paravirtualized kernel on bare hardware [ 0.034974] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034981] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035297] percpu: Embedded 65 pages/cpu s229376 r8192 d28672 u524288 [ 0.035301] pcpu-alloc: s229376 r8192 d28672 u524288 alloc=1*2097152 [ 0.035304] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.035326] Built 1 zonelists, mobility grouping on. Total pages: 4104199 [ 0.035328] Policy zone: Normal [ 0.035329] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.13.0-35-generic root=UUID=HASH_DA8-34A8-3B1A-351E-CC2B518D961D ro quiet splash vt.handoff=7 [ 0.036412] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.036962] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037029] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.076581] Memory: 16042440K/16682196K available (16393K kernel code, 3512K rwdata, 10492K rodata, 2904K init, 5724K bss, 639496K reserved, 0K cma-reserved) [ 0.076588] random: get_random_u64 called from __kmem_cache_create+0x2d/0x440 with crng_init=0 [ 0.076685] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.076695] Kernel/User page tables isolation: enabled [ 0.076708] ftrace: allocating 49241 entries in 193 pages [ 0.089479] ftrace: allocated 193 pages with 3 groups [ 0.089570] rcu: Hierarchical RCU implementation. [ 0.089572] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.089573] Rude variant of Tasks RCU enabled. [ 0.089573] Tracing variant of Tasks RCU enabled. [ 0.089574] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.089575] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.092597] NR_IRQS: 524544, nr_irqs: 896, preallocated irqs: 16 [ 0.092801] random: crng done (trusting CPU's manufacturer) [ 0.092817] vt handoff: transparent VT on vt#7 [ 0.092821] Console: colour dummy device 80x25 [ 0.092840] printk: console [tty0] enabled [ 0.092852] ACPI: Core revision 20210331 [ 0.093155] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.093166] APIC: Switch to symmetric I/O mode setup [ 0.093167] DMAR: Host address width 46 [ 0.093168] DMAR: DRHD base: 0x000000fbffd000 flags: 0x0 [ 0.093172] DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b [ 0.093174] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 0.093177] DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df [ 0.093178] DMAR: RMRR base: 0x000000da8e9000 end: 0x000000da8ebfff [ 0.093180] DMAR: ATSR flags: 0x0 [ 0.093181] DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 1 [ 0.093183] DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 1 [ 0.093183] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 0.093184] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.093603] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.093604] x2apic enabled [ 0.093611] Switched APIC routing to cluster x2apic. [ 0.094084] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.113166] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32563e6108b, max_idle_ns: 440795304287 ns [ 0.113171] Calibrating delay loop (skipped), value calculated using timer frequency.. 6984.24 BogoMIPS (lpj=13968484) [ 0.113173] pid_max: default: 32768 minimum: 301 [ 0.116208] LSM: Security Framework initializing [ 0.116216] Yama: becoming mindful. [ 0.116236] AppArmor: AppArmor initialized [ 0.116279] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.116310] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.116505] CPU0: Thermal monitoring enabled (TM1) [ 0.116565] process: using mwait in idle threads [ 0.116567] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.116568] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.116571] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.116572] Spectre V2 : Mitigation: Retpolines [ 0.116572] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.116573] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.116574] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.116575] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.116576] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.116578] MDS: Mitigation: Clear CPU buffers [ 0.120216] Freeing SMP alternatives memory: 40K [ 0.120366] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1053 [ 0.120371] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz (family: 0x6, model: 0x3f, stepping: 0x2) [ 0.120468] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.120487] ... version: 3 [ 0.120488] ... bit width: 48 [ 0.120489] ... generic registers: 4 [ 0.120489] ... value mask: 0000ffffffffffff [ 0.120490] ... max period: 00007fffffffffff [ 0.120490] ... fixed-purpose events: 3 [ 0.120491] ... event mask: 000000070000000f [ 0.120572] rcu: Hierarchical SRCU implementation. [ 0.121169] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.121169] smp: Bringing up secondary CPUs ... [ 0.121169] x86: Booting SMP configuration: [ 0.121169] .... node #0, CPUs: #1 #2 #3 #4 [ 0.125877] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.125877] #5 #6 #7 [ 0.125877] smp: Brought up 1 node, 8 CPUs [ 0.125877] smpboot: Max logical packages: 1 [ 0.125877] smpboot: Total of 8 processors activated (55873.93 BogoMIPS) [ 0.129689] devtmpfs: initialized [ 0.129689] x86/mm: Memory block size: 128MB [ 0.129997] PM: Registering ACPI NVS region [mem 0xdb6c1000-0xdbefefff] (8642560 bytes) [ 0.129997] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.129997] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.129997] pinctrl core: initialized pinctrl subsystem [ 0.129997] PM: RTC time: 02:42:06, date: 2022-03-17 [ 0.129997] NET: Registered protocol family 16 [ 0.129997] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.129997] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.129997] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.130005] thermal_sys: Registered thermal governor 'fair_share' [ 0.130005] thermal_sys: Registered thermal governor 'bang_bang' [ 0.130005] thermal_sys: Registered thermal governor 'step_wise' [ 0.130005] thermal_sys: Registered thermal governor 'user_space' [ 0.130005] thermal_sys: Registered thermal governor 'power_allocator' [ 0.130005] EISA bus registered [ 0.130005] cpuidle: using governor ladder [ 0.130005] cpuidle: using governor menu [ 0.130005] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.130005] ACPI: bus type PCI registered [ 0.130005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.130005] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.130005] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.130005] PCI: Using configuration type 1 for base access [ 0.130005] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.130005] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.130077] Kprobes globally optimized [ 0.130081] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.130081] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.133226] ACPI: Added _OSI(Module Device) [ 0.133228] ACPI: Added _OSI(Processor Device) [ 0.133228] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.133229] ACPI: Added _OSI(Processor Aggregator Device) [ 0.133230] ACPI: Added _OSI(Linux-Dell-Video) [ 0.133231] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.133231] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.200389] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.207423] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.210787] ACPI: Interpreter enabled [ 0.210800] ACPI: (supports S0 S3 S4 S5) [ 0.210801] ACPI: Using IOAPIC for interrupt routing [ 0.210818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.211255] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.227014] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.227020] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.227053] PCI host bridge to bus 0000:ff [ 0.227055] pci_bus 0000:ff: root bus resource [bus ff] [ 0.227066] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000 [ 0.227112] pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100 [ 0.227144] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100 [ 0.227176] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000 [ 0.227207] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000 [ 0.227236] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000 [ 0.227266] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000 [ 0.227301] pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000 [ 0.227332] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000 [ 0.227364] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000 [ 0.227394] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000 [ 0.227424] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000 [ 0.227454] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000 [ 0.227484] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100 [ 0.227515] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000 [ 0.227548] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100 [ 0.227577] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000 [ 0.227607] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000 [ 0.227639] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100 [ 0.227674] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000 [ 0.227708] pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000 [ 0.227741] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000 [ 0.227776] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000 [ 0.227814] pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000 [ 0.227847] pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000 [ 0.227881] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000 [ 0.227913] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000 [ 0.227946] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000 [ 0.227980] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000 [ 0.228014] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000 [ 0.228049] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000 [ 0.228087] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000 [ 0.228123] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000 [ 0.228155] pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000 [ 0.228189] pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000 [ 0.228223] pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000 [ 0.228258] pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000 [ 0.228294] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000 [ 0.228329] pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000 [ 0.228364] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000 [ 0.228397] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000 [ 0.228430] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000 [ 0.228462] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000 [ 0.228494] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000 [ 0.228526] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000 [ 0.228562] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000 [ 0.228593] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000 [ 0.228627] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000 [ 0.228658] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000 [ 0.228682] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000 [ 0.228714] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000 [ 0.228746] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000 [ 0.231403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.231407] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.231530] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR] [ 0.231642] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.231643] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.232179] PCI host bridge to bus 0000:00 [ 0.232182] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.232184] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.232185] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.232186] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.232187] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000cbfff window] [ 0.232188] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffbfff window] [ 0.232202] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000 [ 0.232352] pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400 [ 0.232398] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.232525] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400 [ 0.232570] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.232695] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400 [ 0.232739] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.232855] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000 [ 0.232977] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000 [ 0.233106] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000 [ 0.233215] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020 [ 0.233221] pci 0000:00:05.4: reg 0x10: [mem 0xfb33e000-0xfb33efff] [ 0.233342] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 0.233532] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601 [ 0.233545] pci 0000:00:11.4: reg 0x10: [io 0x20a0-0x20a7] [ 0.233552] pci 0000:00:11.4: reg 0x14: [io 0x20b4-0x20b7] [ 0.233559] pci 0000:00:11.4: reg 0x18: [io 0x2098-0x209f] [ 0.233566] pci 0000:00:11.4: reg 0x1c: [io 0x20b0-0x20b3] [ 0.233573] pci 0000:00:11.4: reg 0x20: [io 0x2060-0x207f] [ 0.233580] pci 0000:00:11.4: reg 0x24: [mem 0xfb33d000-0xfb33d7ff] [ 0.233616] pci 0000:00:11.4: PME# supported from D3hot [ 0.233721] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 0.233736] pci 0000:00:14.0: reg 0x10: [mem 0xfb320000-0xfb32ffff 64bit] [ 0.233783] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.233889] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 0.233904] pci 0000:00:16.0: reg 0x10: [mem 0xfb335000-0xfb33500f 64bit] [ 0.233959] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.234060] pci 0000:00:16.3: [8086:8d3d] type 00 class 0x070002 [ 0.234071] pci 0000:00:16.3: reg 0x10: [io 0x2090-0x2097] [ 0.234076] pci 0000:00:16.3: reg 0x14: [mem 0xfb33c000-0xfb33cfff] [ 0.234222] pci 0000:00:19.0: [8086:15a0] type 00 class 0x020000 [ 0.234231] pci 0000:00:19.0: reg 0x10: [mem 0xfb300000-0xfb31ffff] [ 0.234237] pci 0000:00:19.0: reg 0x14: [mem 0xfb33b000-0xfb33bfff] [ 0.234242] pci 0000:00:19.0: reg 0x18: [io 0x2040-0x205f] [ 0.234285] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.234392] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 [ 0.234406] pci 0000:00:1a.0: reg 0x10: [mem 0xfb33a000-0xfb33a3ff] [ 0.234480] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.234584] pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300 [ 0.234597] pci 0000:00:1b.0: reg 0x10: [mem 0xfb330000-0xfb333fff 64bit] [ 0.234653] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.234755] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 0.234822] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.234939] pci 0000:00:1c.1: [8086:8d12] type 01 class 0x060400 [ 0.235007] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.235122] pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060401 [ 0.235190] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.235307] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 0.235375] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.235494] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 0.235508] pci 0000:00:1d.0: reg 0x10: [mem 0xfb339000-0xfb3393ff] [ 0.235582] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.235689] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 [ 0.235879] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 0.235889] pci 0000:00:1f.2: reg 0x10: [io 0x2088-0x208f] [ 0.235895] pci 0000:00:1f.2: reg 0x14: [io 0x20ac-0x20af] [ 0.235901] pci 0000:00:1f.2: reg 0x18: [io 0x2080-0x2087] [ 0.235907] pci 0000:00:1f.2: reg 0x1c: [io 0x20a8-0x20ab] [ 0.235913] pci 0000:00:1f.2: reg 0x20: [io 0x2020-0x203f] [ 0.235919] pci 0000:00:1f.2: reg 0x24: [mem 0xfb338000-0xfb3387ff] [ 0.235949] pci 0000:00:1f.2: PME# supported from D3hot [ 0.236048] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 0.236061] pci 0000:00:1f.3: reg 0x10: [mem 0xfb334000-0xfb3340ff 64bit] [ 0.236074] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f] [ 0.236331] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.236487] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.236659] pci 0000:03:00.0: [10de:107d] type 00 class 0x030000 [ 0.236668] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.236676] pci 0000:03:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.236683] pci 0000:03:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref] [ 0.236688] pci 0000:03:00.0: reg 0x24: [io 0x1000-0x107f] [ 0.236693] pci 0000:03:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.236708] pci 0000:03:00.0: BAR 3: assigned to efifb [ 0.236806] pci 0000:03:00.1: [10de:0e08] type 00 class 0x040300 [ 0.236814] pci 0000:03:00.1: reg 0x10: [mem 0xfb000000-0xfb003fff] [ 0.236916] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.236919] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 0.236920] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.236923] pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.236953] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.237025] pci 0000:05:00.0: [8086:4238] type 00 class 0x028000 [ 0.237059] pci 0000:05:00.0: reg 0x10: [mem 0xfb200000-0xfb201fff 64bit] [ 0.237210] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.237324] pci 0000:00:1c.1: PCI bridge to [bus 05] [ 0.237329] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.237389] pci 0000:06:00.0: [1283:8893] type 01 class 0x060401 [ 0.237521] pci 0000:06:00.0: supports D1 D2 [ 0.237521] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.237583] pci 0000:00:1c.3: PCI bridge to [bus 06-07] (subtractive decode) [ 0.237591] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.237592] pci 0000:00:1c.3: bridge window [io 0x1000-0xffff window] (subtractive decode) [ 0.237593] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.237594] pci 0000:00:1c.3: bridge window [mem 0x000c4000-0x000cbfff window] (subtractive decode) [ 0.237595] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xfbffbfff window] (subtractive decode) [ 0.237634] pci_bus 0000:07: extended config space not accessible [ 0.237711] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode) [ 0.237732] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.237733] pci 0000:06:00.0: bridge window [io 0x1000-0xffff window] (subtractive decode) [ 0.237734] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.237735] pci 0000:06:00.0: bridge window [mem 0x000c4000-0x000cbfff window] (subtractive decode) [ 0.237736] pci 0000:06:00.0: bridge window [mem 0xf0000000-0xfbffbfff window] (subtractive decode) [ 0.237818] pci 0000:08:00.0: [8086:24fb] type 00 class 0x028000 [ 0.237853] pci 0000:08:00.0: reg 0x10: [mem 0xfb100000-0xfb101fff 64bit] [ 0.238033] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.238167] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.238171] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.238455] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.238505] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.238552] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.238599] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.238645] ACPI: PCI: Interrupt link LNKE configured for IRQ 9 [ 0.238692] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.238692] ACPI: PCI: Interrupt link LNKF disabled [ 0.238739] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.238785] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.238786] ACPI: PCI: Interrupt link LNKH disabled [ 0.239174] iommu: Default domain type: Translated [ 0.239174] SCSI subsystem initialized [ 0.239174] libata version 3.00 loaded. [ 0.239174] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 0.239174] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.239174] pci 0000:03:00.0: vgaarb: bridge control possible [ 0.239174] vgaarb: loaded [ 0.239174] ACPI: bus type USB registered [ 0.239174] usbcore: registered new interface driver usbfs [ 0.239174] usbcore: registered new interface driver hub [ 0.239174] usbcore: registered new device driver usb [ 0.239174] pps_core: LinuxPPS API ver. 1 registered [ 0.239174] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.239174] PTP clock support registered [ 0.239174] EDAC MC: Ver: 3.0.0 [ 0.239174] Registered efivars operations [ 0.239174] NetLabel: Initializing [ 0.239174] NetLabel: domain hash size = 128 [ 0.239174] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.239174] NetLabel: unlabeled traffic allowed by default [ 0.239174] PCI: Using ACPI for IRQ routing [ 0.245239] PCI: pci_cache_line_size set to 64 bytes [ 0.245327] e820: reserve RAM buffer [mem 0xd3ff5018-0xd3ffffff] [ 0.245329] e820: reserve RAM buffer [mem 0xd404a000-0xd7ffffff] [ 0.245330] e820: reserve RAM buffer [mem 0xda377000-0xdbffffff] [ 0.245920] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.245926] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.247970] clocksource: Switched to clocksource tsc-early [ 0.253290] VFS: Disk quotas dquot_6.6.0 [ 0.253304] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.253394] AppArmor: AppArmor Filesystem Enabled [ 0.253418] pnp: PnP ACPI init [ 0.254000] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.254095] system 00:01: [io 0x0500-0x053f] has been reserved [ 0.254097] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.254098] system 00:01: [io 0x0540-0x057f] has been reserved [ 0.254100] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.254101] system 00:01: [io 0x0ca0-0x0ca5] has been reserved [ 0.254102] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.254103] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.254104] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.254106] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.254107] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.254108] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.254109] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.254110] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.254111] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.254117] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.254195] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.254231] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.254267] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.254314] pnp: PnP ACPI: found 5 devices [ 0.259689] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.259734] NET: Registered protocol family 2 [ 0.259936] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.261654] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.261761] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.261933] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.261995] TCP: Hash tables configured (established 131072 bind 65536) [ 0.262083] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.262158] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.262202] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.262250] NET: Registered protocol family 1 [ 0.262254] NET: Registered protocol family 44 [ 0.262259] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.262285] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.262291] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.262297] pci 0000:03:00.0: BAR 6: assigned [mem 0xfb080000-0xfb0fffff pref] [ 0.262299] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.262300] pci 0000:00:03.0: bridge window [io 0x1000-0x1fff] [ 0.262303] pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.262305] pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.262308] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.262316] pci 0000:00:1c.1: PCI bridge to [bus 05] [ 0.262319] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.262324] pci 0000:06:00.0: PCI bridge to [bus 07] [ 0.262343] pci 0000:00:1c.3: PCI bridge to [bus 06-07] [ 0.262351] pci 0000:00:1c.4: PCI bridge to [bus 08] [ 0.262354] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.262360] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.262361] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.262362] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.262363] pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000cbfff window] [ 0.262364] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfbffbfff window] [ 0.262365] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.262366] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.262367] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref] [ 0.262369] pci_bus 0000:05: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.262370] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.262371] pci_bus 0000:06: resource 5 [io 0x1000-0xffff window] [ 0.262372] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.262373] pci_bus 0000:06: resource 7 [mem 0x000c4000-0x000cbfff window] [ 0.262374] pci_bus 0000:06: resource 8 [mem 0xf0000000-0xfbffbfff window] [ 0.262375] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window] [ 0.262376] pci_bus 0000:07: resource 5 [io 0x1000-0xffff window] [ 0.262377] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.262378] pci_bus 0000:07: resource 7 [mem 0x000c4000-0x000cbfff window] [ 0.262379] pci_bus 0000:07: resource 8 [mem 0xf0000000-0xfbffbfff window] [ 0.262380] pci_bus 0000:08: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.262565] pci 0000:00:05.0: disabled boot interrupts on device [8086:2f28] [ 0.262977] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.263006] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 0.263016] pci 0000:06:00.0: CLS mismatch (32 != 64), using 64 bytes [ 0.263070] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.263071] software IO TLB: mapped [mem 0x00000000cde2c000-0x00000000d1e2c000] (64MB) [ 0.263089] Trying to unpack rootfs image as initramfs... [ 0.269766] Initialise system trusted keyrings [ 0.269780] Key type blacklist registered [ 0.269810] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.270637] zbud: loaded [ 0.270848] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.270952] fuse: init (API version 7.34) [ 0.271076] integrity: Platform Keyring initialized [ 0.279439] Key type asymmetric registered [ 0.279443] Asymmetric key parser 'x509' registered [ 0.279457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.279491] io scheduler mq-deadline registered [ 0.279897] pcieport 0000:00:01.0: AER: enabled with IRQ 25 [ 0.280105] pcieport 0000:00:02.0: AER: enabled with IRQ 26 [ 0.280304] pcieport 0000:00:03.0: AER: enabled with IRQ 27 [ 0.280855] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.280914] efifb: probing for efifb [ 0.280928] efifb: No BGRT, not showing boot graphics [ 0.280928] efifb: framebuffer at 0xf9000000, using 3072k, total 3072k [ 0.280930] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.280931] efifb: scrolling: redraw [ 0.280931] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.280968] fbcon: Deferring console take-over [ 0.280969] fb0: EFI VGA frame buffer device [ 0.281032] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.281074] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.281113] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.281153] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.281203] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.281243] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.281283] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.281323] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.281792] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.281825] ACPI: button: Power Button [PWRB] [ 0.281868] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.281884] ACPI: button: Power Button [PWRF] [ 0.290280] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.291261] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 0.311621] 0000:00:16.3: ttyS4 at I/O 0x2090 (irq = 17, base_baud = 115200) is a 16550A [ 0.312597] Linux agpgart interface v0.103 [ 0.337220] tpm_tis 00:04: 1.2 TPM (device-id 0x1A, rev-id 16) [ 0.456803] Freeing initrd memory: 102112K [ 0.625281] loop: module loaded [ 0.625652] libphy: Fixed MDIO Bus: probed [ 0.625654] tun: Universal TUN/TAP device driver, 1.6 [ 0.625703] PPP generic driver version 2.4.2 [ 0.625741] VFIO - User Level meta-driver version: 0.3 [ 0.625811] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.625815] ehci-pci: EHCI PCI platform driver [ 0.625987] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.625993] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.626004] ehci-pci 0000:00:1a.0: debug port 2 [ 0.629906] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb33a000 [ 0.645232] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.645307] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 0.645312] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.645316] usb usb1: Product: EHCI Host Controller [ 0.645319] usb usb1: Manufacturer: Linux 5.13.0-35-generic ehci_hcd [ 0.645321] usb usb1: SerialNumber: ... [ 0.645512] hub 1-0:1.0: USB hub found [ 0.645522] hub 1-0:1.0: 2 ports detected [ 0.645777] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.645782] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.645791] ehci-pci 0000:00:1d.0: debug port 2 [ 0.649700] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb339000 [ 0.665246] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.665311] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 0.665313] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.665315] usb usb2: Product: EHCI Host Controller [ 0.665316] usb usb2: Manufacturer: Linux 5.13.0-35-generic ehci_hcd [ 0.665317] usb usb2: SerialNumber: ... [ 0.665393] hub 2-0:1.0: USB hub found [ 0.665397] hub 2-0:1.0: 2 ports detected [ 0.665524] ehci-platform: EHCI generic platform driver [ 0.665531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.665538] ohci-pci: OHCI PCI platform driver [ 0.665549] ohci-platform: OHCI generic platform driver [ 0.665553] uhci_hcd: USB Universal Host Controller Interface driver [ 0.665601] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.667999] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.668003] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.668099] mousedev: PS/2 mouse device common for all mice [ 0.668175] rtc_cmos 00:00: RTC can wake from S4 [ 0.668360] rtc_cmos 00:00: registered as rtc0 [ 0.668414] rtc_cmos 00:00: setting system clock to 2022-03-17T02:42:06 UTC (1647484926) [ 0.668428] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.668434] i2c /dev entries driver [ 0.668551] device-mapper: uevent: version 1.0.3 [ 0.668587] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 0.668602] platform eisa.0: Probing EISA bus 0 [ 0.668603] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.668604] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.668605] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.668606] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.668607] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.668608] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.668609] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.668610] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.668610] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.668611] platform eisa.0: EISA: Detected 0 cards [ 0.668618] intel_pstate: Intel P-state driver initializing [ 0.668927] ledtrig-cpu: registered to indicate activity on CPUs [ 0.668940] EFI Variables Facility v0.08 2004-May-17 [ 0.693809] drop_monitor: Initializing network drop monitor service [ 0.694103] NET: Registered protocol family 10 [ 0.702167] Segment Routing with IPv6 [ 0.702189] NET: Registered protocol family 17 [ 0.702230] Key type dns_resolver registered [ 0.702913] microcode: sig=0x306f2, pf=0x1, revision=0x46 [ 0.702975] microcode: Microcode Update Driver: v2.2. [ 0.703051] resctrl: L3 monitoring detected [ 0.703055] IPI shorthand broadcast: enabled [ 0.703065] sched_clock: Marking stable (702649471, 391293)->(710892023, -7851259) [ 0.703300] registered taskstats version 1 [ 0.703317] Loading compiled-in X.509 certificates [ 0.704104] Loaded X.509 cert 'Build time autogenerated kernel key: 5f6c510aaa10fd3fcaa8fd7597766fc3e127b77c' [ 0.704790] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.705481] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.705483] blacklist: Loading compiled-in revocation X.509 certificates [ 0.705500] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.705862] zswap: loaded using pool lzo/zbud [ 0.706008] Key type ._fscrypt registered [ 0.706010] Key type .fscrypt registered [ 0.706011] Key type fscrypt-provisioning registered [ 0.706144] Key type trusted registered [ 0.708949] Key type encrypted registered [ 0.708954] AppArmor: AppArmor sha1 policy hashing enabled [ 0.709225] integrity: Loading X.509 certificate: UEFI:db [ 0.709251] integrity: Loaded X.509 cert 'Hewlett-Packard UEFI Secure Boot DB Key: e7203ac28b848d3c03432f6a485dd1f4c7b8e529' [ 0.709252] integrity: Loading X.509 certificate: UEFI:db [ 0.709273] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.709274] integrity: Loading X.509 certificate: UEFI:db [ 0.709292] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.709662] integrity: Revoking X.509 certificate: UEFI:dbx [ 0.709681] blacklist: Revoked X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.709682] integrity: Revoking X.509 certificate: UEFI:dbx [ 0.709693] blacklist: Revoked X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 0.710118] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.710449] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.710455] Loading compiled-in module X.509 certificates [ 0.711112] Loaded X.509 cert 'Build time autogenerated kernel key: 5f6c510aaa10fd3fcaa8fd7597766fc3e127b77c' [ 0.711114] ima: Allocated hash algorithm: sha1 [ 0.901307] ima: No architecture policies found [ 0.901328] evm: Initialising EVM extended attributes: [ 0.901330] evm: security.selinux [ 0.901332] evm: security.SMACK64 [ 0.901333] evm: security.SMACK64EXEC [ 0.901335] evm: security.SMACK64TRANSMUTE [ 0.901336] evm: security.SMACK64MMAP [ 0.901337] evm: security.apparmor [ 0.901339] evm: security.ima [ 0.901340] evm: security.capability [ 0.901341] evm: HMAC attrs: 0x1 [ 0.901778] PM: Magic number: 14:152:713 [ 0.901909] acpi LNXCPU:1d: hash matches [ 0.902062] RAS: Correctable Errors collector initialized. [ 0.903754] Freeing unused decrypted memory: 2036K [ 0.904376] Freeing unused kernel image (initmem) memory: 2904K [ 0.904411] Write protecting the kernel read-only data: 30720k [ 0.904994] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.905441] Freeing unused kernel image (rodata/data gap) memory: 1796K [ 0.955830] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.955832] x86/mm: Checking user space page tables [ 0.981199] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.998548] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.998576] Run /init as init process [ 0.998578] with arguments: [ 0.998579] /init [ 0.998580] splash [ 0.998581] with environment: [ 0.998582] HOME=/ [ 0.998582] TERM=linux [ 0.998583] BOOT_IMAGE=/boot/vmlinuz-5.13.0-35-generic [ 1.001221] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.113646] e1000e: Intel(R) PRO/1000 Network Driver [ 1.113650] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.113690] e1000e 0000:00:19.0: enabling device (0140 -> 0142) [ 1.113947] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.115097] ahci 0000:00:11.4: version 3.0 [ 1.115292] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.115296] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems sxs apst [ 1.115319] i801_smbus 0000:00:1f.3: enabling device (0100 -> 0103) [ 1.119227] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 1.119250] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.120493] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.120499] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.121738] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.121875] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13 [ 1.121877] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.121879] usb usb3: Product: xHCI Host Controller [ 1.121880] usb usb3: Manufacturer: Linux 5.13.0-35-generic xhci-hcd [ 1.121881] usb usb3: SerialNumber: ... [ 1.121993] hub 3-0:1.0: USB hub found [ 1.122011] hub 3-0:1.0: 15 ports detected [ 1.125887] acpi PNP0C14:01: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:00) [ 1.128682] acpi PNP0C14:02: duplicate WMI GUID HASH_53E-EB5B-24B1-6EAA-86C4E644BCE5 (first instance was on PNP0C14:00) [ 1.128685] acpi PNP0C14:02: duplicate WMI GUID HASH_6E6-08F5-4E4B-AC3D-6648CE768713 (first instance was on PNP0C14:00) [ 1.128843] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.128849] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.128853] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.128897] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13 [ 1.128901] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.128902] usb usb4: Product: xHCI Host Controller [ 1.128904] usb usb4: Manufacturer: Linux 5.13.0-35-generic xhci-hcd [ 1.128906] usb usb4: SerialNumber: ... [ 1.129028] hub 4-0:1.0: USB hub found [ 1.129041] hub 4-0:1.0: 6 ports detected [ 1.130404] usb: port power management may be unreliable [ 1.130464] cryptd: max_cpu_qlen set to 1000 [ 1.131897] i2c i2c-0: 2/8 memory slots populated (from DMI) [ 1.131901] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 1.134322] AVX2 version of gcm_enc/dec engaged. [ 1.134357] AES CTR mode by8 optimization enabled [ 1.141551] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05 [ 1.141556] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.141607] usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05 [ 1.141610] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.141842] hub 1-1:1.0: USB hub found [ 1.141887] hub 2-1:1.0: USB hub found [ 1.141924] hub 1-1:1.0: 6 ports detected [ 1.141933] hub 2-1:1.0: 8 ports detected [ 1.157484] scsi host0: ahci [ 1.157605] scsi host1: ahci [ 1.157678] scsi host2: ahci [ 1.157754] scsi host3: ahci [ 1.157783] ata1: SATA max UDMA/133 abar m2048@0xfb33d000 port 0xfb33d100 irq 33 [ 1.157786] ata2: SATA max UDMA/133 abar m2048@0xfb33d000 port 0xfb33d180 irq 33 [ 1.157787] ata3: SATA max UDMA/133 abar m2048@0xfb33d000 port 0xfb33d200 irq 33 [ 1.157789] ata4: SATA max UDMA/133 abar m2048@0xfb33d000 port 0xfb33d280 irq 33 [ 1.157994] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode [ 1.157998] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems sxs apst [ 1.173656] scsi host4: ahci [ 1.173741] scsi host5: ahci [ 1.173825] scsi host6: ahci [ 1.173904] scsi host7: ahci [ 1.173935] ata5: SATA max UDMA/133 abar m2048@0xfb338000 port 0xfb338100 irq 34 [ 1.173937] ata6: SATA max UDMA/133 abar m2048@0xfb338000 port 0xfb338180 irq 34 [ 1.173938] ata7: DUMMY [ 1.173939] ata8: DUMMY [ 1.198421] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.265070] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XXX [ 1.265076] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.265114] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.266210] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 1.277235] tsc: Refined TSC clocksource calibration: 3491.913 MHz [ 1.277248] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255790e5ea, max_idle_ns: 440795224414 ns [ 1.277295] clocksource: Switched to clocksource tsc [ 1.445254] usb 3-9: new low-speed USB device number 2 using xhci_hcd [ 1.472266] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.472565] ata3: SATA link down (SStatus 0 SControl 300) [ 1.472592] ata4: SATA link down (SStatus 0 SControl 300) [ 1.472627] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.472711] ata1.00: ATA-8: MB2000EAZNL, HPG3, max UDMA/133 [ 1.472718] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 1.473230] ata1.00: configured for UDMA/133 [ 1.473445] scsi 0:0:0:0: Direct-Access ATA MB2000EAZNL HPG3 PQ: 0 ANSI: 5 [ 1.473513] ata2.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133 [ 1.473520] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.473744] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.473792] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.473809] sd 0:0:0:0: [sda] Write Protect is off [ 1.473812] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.473841] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.474509] ata2.00: configured for UDMA/133 [ 1.474667] scsi 1:0:0:0: Direct-Access ATA HGST HTS725050A7 B550 PQ: 0 ANSI: 5 [ 1.474973] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.475009] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.475013] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.475020] sd 1:0:0:0: [sdb] Write Protect is off [ 1.475022] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.475038] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.492690] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.492718] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.493337] ata5.00: ATA-9: WDC WD10JPVX-75JC3T0, 02.01A02, max UDMA/133 [ 1.493344] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 1.494149] ata5.00: configured for UDMA/133 [ 1.494307] scsi 4:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A02 PQ: 0 ANSI: 5 [ 1.494610] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.494645] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.494651] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 1.494662] sd 4:0:0:0: [sdc] Write Protect is off [ 1.494666] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.494683] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.522410] ata6.00: ATA-8: ST500VT001-1K6142, 0001SDC1, max UDMA/133 [ 1.522417] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32) [ 1.529055] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 1.547368] sdb: sdb1 sdb5 sdb6 sdb7 sdb8 [ 1.569344] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 1.577334] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 1.599568] usb 3-9: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 1.599577] usb 3-9: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 1.599581] usb 3-9: Product: Dell KB216 Wired Keyboard [ 1.651453] ata6.00: configured for UDMA/133 [ 1.651654] scsi 5:0:0:0: Direct-Access ATA ST500VT001-1K614 SDC1 PQ: 0 ANSI: 5 [ 1.651940] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1.651999] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.652008] sd 5:0:0:0: [sdd] 4096-byte physical blocks [ 1.652030] sd 5:0:0:0: [sdd] Write Protect is off [ 1.652034] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.652052] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.722023] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 1.722027] GPT:209715199 != 976773167 [ 1.722030] GPT:Alternate GPT header not at the end of the disk. [ 1.722031] GPT:209715199 != 976773167 [ 1.722033] GPT: Use GNU Parted to correct GPT errors. [ 1.722044] sdd: sdd1 sdd2 [ 1.725310] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd [ 1.745535] usb 4-4: New USB device found, idVendor=0451, idProduct=8140, bcdDevice= 1.00 [ 1.745543] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.746306] hub 4-4:1.0: USB hub found [ 1.746867] hub 4-4:1.0: 4 ports detected [ 1.757328] sd 5:0:0:0: [sdd] Attached SCSI removable disk [ 1.873256] usb 3-11: new high-speed USB device number 3 using xhci_hcd [ 1.878900] sdc: sdc1 sdc2 sdc3 sdc4 sdc5 sdc6 sdc7 [ 1.909390] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 2.026903] usb 3-11: New USB device found, idVendor=05e3, idProduct=0605, bcdDevice= 6.0b [ 2.026912] usb 3-11: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.026916] usb 3-11: Product: USB2.0 Hub [ 2.027592] hub 3-11:1.0: USB hub found [ 2.027853] hub 3-11:1.0: 4 ports detected [ 2.157243] usb 3-13: new high-speed USB device number 4 using xhci_hcd [ 2.305536] usb 3-13: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00 [ 2.305545] usb 3-13: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.305549] usb 3-13: SerialNumber: ... [ 2.306032] hub 3-13:1.0: USB hub found [ 2.306059] hub 3-13:1.0: 4 ports detected [ 2.433210] usb 3-14: new low-speed USB device number 5 using xhci_hcd [ 2.585398] usb 3-14: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00 [ 2.585406] usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.585410] usb 3-14: Product: Dell MS116 USB Optical Mouse [ 2.585413] usb 3-14: Manufacturer: PixArt [ 2.594570] hid: raw HID events driver (C) Jiri Kosina [ 2.606855] usbcore: registered new interface driver usbhid [ 2.606860] usbhid: USB HID core driver [ 2.612005] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:413C:2113.0001/input/input5 [ 2.669406] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-9/input0 [ 2.669637] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:413C:2113.0002/input/input6 [ 2.729430] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:413C:2113.0002/input/input7 [ 2.729567] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:00:14.0-9/input1 [ 2.729777] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:413C:301A.0003/input/input8 [ 2.729947] hid-generic 0003:413C:301A.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-14/input0 [ 4.717193] raid6: avx2x4 gen() 482995 MB/s [ 4.765192] raid6: avx2x4 xor() 155737 MB/s [ 4.813192] raid6: avx2x2 gen() 508648 MB/s [ 4.861192] raid6: avx2x2 xor() 307992 MB/s [ 4.909192] raid6: avx2x1 gen() 429206 MB/s [ 4.957193] raid6: avx2x1 xor() 273711 MB/s [ 5.005193] raid6: sse2x4 gen() 268864 MB/s [ 5.053193] raid6: sse2x4 xor() 151255 MB/s [ 5.101193] raid6: sse2x2 gen() 284739 MB/s [ 5.149194] raid6: sse2x2 xor() 173448 MB/s [ 5.197193] raid6: sse2x1 gen() 221777 MB/s [ 5.245192] raid6: sse2x1 xor() 142639 MB/s [ 5.245193] raid6: using algorithm avx2x2 gen() 22481 MB/s [ 5.245194] raid6: .... xor() 307992 MB/s, rmw enabled [ 5.245195] raid6: using avx2x2 recovery algorithm [ 5.246349] xor: automatically using best checksumming function avx [ 5.247396] async_tx: api initialized (async) [ 5.294585] Btrfs loaded, crc32c=crc32c-intel, zoned=yes [ 16.309261] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 17.182467] systemd[1]: Inserted module 'autofs4' [ 17.379039] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 17.397426] systemd[1]: Detected architecture x86-64. [ 17.430201] systemd[1]: Set hostname to ... [ 20.692900] systemd[1]: Configuration file /etc/systemd/system/update-info-sys.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 20.753361] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid \xe2\x86\x92 /run/anydesk.pid; please update the unit file accordingly. [ 20.783050] systemd[1]: Created slice system-modprobe.slice. [ 20.783274] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 20.783491] systemd[1]: Created slice User and Session Slice. [ 20.783551] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 20.783723] systemd[1]: Set up automount ... [ 20.783767] systemd[1]: Reached target User and Group Name Lookups. [ 20.783778] systemd[1]: Reached target Remote File Systems. [ 20.783785] systemd[1]: Reached target Slices. [ 20.783859] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 20.783951] systemd[1]: Listening on LVM2 poll daemon socket. [ 20.784035] systemd[1]: Listening on Syslog Socket. [ 20.784116] systemd[1]: Listening on fsck to fsckd communication Socket. [ 20.784165] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 20.784329] systemd[1]: Listening on Journal Audit Socket. [ 20.784408] systemd[1]: Listening on Journal Socket (/dev/log). [ 20.784504] systemd[1]: Listening on Journal Socket. [ 20.784598] systemd[1]: Listening on udev Control Socket. [ 20.784679] systemd[1]: Listening on udev Kernel Socket. [ 20.785545] systemd[1]: Mounting Huge Pages File System... [ 20.786346] systemd[1]: Mounting POSIX Message Queue File System... [ 20.787240] systemd[1]: Mounting Kernel Debug File System... [ 20.788153] systemd[1]: Mounting Kernel Trace File System... [ 20.789388] systemd[1]: Starting Journal Service... [ 20.790215] systemd[1]: Starting Availability of block devices... [ 20.791232] systemd[1]: Starting Set the console keyboard layout... [ 20.792168] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 20.792993] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 20.793997] systemd[1]: Starting Load Kernel Module drm... [ 20.794089] systemd[1]: Condition check resulted in Calculate and configure fs.inotify.max_user_watches based on available memory being skipped. [ 20.862673] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 20.862713] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 20.888446] systemd[1]: Starting Load Kernel Modules... [ 20.889572] systemd[1]: Starting Remount Root and Kernel File Systems... [ 20.890353] systemd[1]: Starting udev Coldplug all Devices... [ 20.891044] systemd[1]: Starting Uncomplicated firewall... [ 20.892334] systemd[1]: Mounted Huge Pages File System. [ 20.892471] systemd[1]: Mounted POSIX Message Queue File System. [ 20.892583] systemd[1]: Mounted Kernel Debug File System. [ 20.892696] systemd[1]: Mounted Kernel Trace File System. [ 20.893089] systemd[1]: Finished Availability of block devices. [ 20.893555] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 20.893773] systemd[1]: XXX@XXX: Succeeded. [ 20.894022] systemd[1]: Finished Load Kernel Module drm. [ 20.941220] systemd[1]: Started Journal Service. [ 21.055855] EXT4-fs (sda3): re-mounted. Opts: (null). Quota mode: none. [ 21.135232] systemd-journald[415]: Received client request to flush runtime journal. [ 21.221964] lp: driver loaded but no devices found [ 21.226776] ppdev: user-space parallel port driver [ 21.378263] IPMI message handler: version 39.2 [ 21.417842] ipmi device interface [ 21.434928] systemd-journald[415]: File /var/log/journal/343ebafbdd7941bf84c9b9fc29143546/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 21.536614] loop0: detected capacity change from 0 to 89352 [ 21.581511] loop1: detected capacity change from 0 to 126760 [ 21.625469] loop2: detected capacity change from 0 to 512664 [ 22.435047] pstore: Using crash dump compression: deflate [ 22.435061] pstore: Registered efi as persistent store backend [ 22.435134] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 22.435137] RAPL PMU: hw unit of domain package 2^-14 Joules [ 22.435138] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 22.621322] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.621509] ACPI Error: Needed [Buffer/String/Package], found [Integer] 000000003d49502e (20210331/exresop-557) [ 22.621516] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20210331/dswexec-431) [ 22.621521] Initialized Local Variables for Method [WVPO]: [ 22.621522] Local1: 00000000a2043f29 <Obj> Buffer(12) 00 00 00 00 00 00 00 00 [ 22.621530] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 22.621531] Arg0: 00000000dd075154 <Obj> Integer 0000000000000004 [ 22.621534] Arg1: 000000003d49502e <Obj> Integer 0000000000000000 [ 22.621538] ACPI Error: Aborting method \_SB.WMIV.WVPO due to previous error (AE_AML_OPERAND_TYPE) (20210331/psparse-529) [ 22.621544] ACPI Error: Aborting method \_SB.WMIV.WMPV due to previous error (AE_AML_OPERAND_TYPE) (20210331/psparse-529) [ 22.621609] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.622698] ACPI Error: Needed [Buffer/String/Package], found [Integer] 0000000036f8cec4 (20210331/exresop-557) [ 22.622703] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20210331/dswexec-431) [ 22.622708] Initialized Local Variables for Method [WVPO]: [ 22.622709] Local1: 000000000087a153 <Obj> Buffer(136) 00 00 00 00 00 00 00 00 [ 22.622716] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 22.622717] Arg0: 0000000077c56fd2 <Obj> Integer 0000000000000080 [ 22.622720] Arg1: 0000000036f8cec4 <Obj> Integer 0000000000000000 [ 22.622724] ACPI Error: Aborting method \_SB.WMIV.WVPO due to previous error (AE_AML_OPERAND_TYPE) (20210331/psparse-529) [ 22.622729] ACPI Error: Aborting method \_SB.WMIV.WMPV due to previous error (AE_AML_OPERAND_TYPE) (20210331/psparse-529) [ 22.622766] input: HP WMI hotkeys as /devices/virtual/input/input9 [ 22.625713] ACPI Error: Needed [Buffer/String/Package], found [Integer] 000000000d610664 (20210331/exresop-557) [ 22.625718] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Index] (20210331/dswexec-431) [ 22.625722] Initialized Local Variables for Method [WVPO]: [ 22.625723] Local1: 000000007d023e0e <Obj> Buffer(136) 00 00 00 00 00 00 00 00 [ 22.625731] Initialized Arguments for Method [WVPO]: (2 arguments defined for method invocation) [ 22.625732] Arg0: 0000000051815a63 <Obj> Integer 0000000000000080 [ 22.625735] Arg1: 000000000d610664 <Obj> Integer 0000000000000000 [ 22.625739] ACPI Error: Aborting method \_SB.WMIV.WVPO due to previous error (AE_AML_OPERAND_TYPE) (20210331/psparse-529) [ 22.625744] ACPI Error: Aborting method \_SB.WMIV.WMPV due to previous error (AE_AML_OPERAND_TYPE) (20210331/psparse-529) [ 22.757769] Intel(R) Wireless WiFi driver for Linux [ 22.757843] iwlwifi 0000:05:00.0: enabling device (0100 -> 0102) [ 22.757911] iwlwifi 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 22.758101] iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2 [ 22.758161] iwlwifi 0000:08:00.0: enabling device (0100 -> 0102) [ 22.758215] iwlwifi 0000:05:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2 [ 22.788882] iwlwifi 0000:08:00.0: loaded firmware version 29.1654887522.0 3168-29.ucode op_mode iwlmvm [ 22.838083] iwlwifi 0000:05:00.0: loaded firmware version XXX.XXX.XXX.XXX build 25532 6000-4.ucode op_mode iwldvm [ 22.918884] fbcon: Taking over console [ 22.918954] Console: switching to colour frame buffer device 128x48 [ 22.932610] EDAC sbridge: Seeking for: PCI ID 8086:2fa0 [ 22.932619] EDAC sbridge: Seeking for: PCI ID 8086:2fa0 [ 22.932627] EDAC sbridge: Seeking for: PCI ID 8086:2f60 [ 22.932630] EDAC sbridge: Seeking for: PCI ID 8086:2fa8 [ 22.932632] EDAC sbridge: Seeking for: PCI ID 8086:2fa8 [ 22.932635] EDAC sbridge: Seeking for: PCI ID 8086:2f71 [ 22.932638] EDAC sbridge: Seeking for: PCI ID 8086:2f71 [ 22.932641] EDAC sbridge: Seeking for: PCI ID 8086:2faa [ 22.932643] EDAC sbridge: Seeking for: PCI ID 8086:2faa [ 22.932646] EDAC sbridge: Seeking for: PCI ID 8086:2fab [ 22.932648] EDAC sbridge: Seeking for: PCI ID 8086:2fab [ 22.932651] EDAC sbridge: Seeking for: PCI ID 8086:2fac [ 22.932653] EDAC sbridge: Seeking for: PCI ID 8086:2fac [ 22.932656] EDAC sbridge: Seeking for: PCI ID 8086:2fad [ 22.932658] EDAC sbridge: Seeking for: PCI ID 8086:2fad [ 22.932661] EDAC sbridge: Seeking for: PCI ID 8086:2f68 [ 22.932663] EDAC sbridge: Seeking for: PCI ID 8086:2f79 [ 22.932666] EDAC sbridge: Seeking for: PCI ID 8086:2f6a [ 22.932670] EDAC sbridge: Seeking for: PCI ID 8086:2f6b [ 22.932673] EDAC sbridge: Seeking for: PCI ID 8086:2f6c [ 22.932676] EDAC sbridge: Seeking for: PCI ID 8086:2f6d [ 22.932680] EDAC sbridge: Seeking for: PCI ID 8086:2ffc [ 22.932681] EDAC sbridge: Seeking for: PCI ID 8086:2ffc [ 22.932685] EDAC sbridge: Seeking for: PCI ID 8086:2ffd [ 22.932687] EDAC sbridge: Seeking for: PCI ID 8086:2ffd [ 22.932690] EDAC sbridge: Seeking for: PCI ID 8086:2fbd [ 22.932693] EDAC sbridge: Seeking for: PCI ID 8086:2fbf [ 22.932696] EDAC sbridge: Seeking for: PCI ID 8086:2fbf [ 22.932698] EDAC sbridge: Seeking for: PCI ID 8086:2fb9 [ 22.932701] EDAC sbridge: Seeking for: PCI ID 8086:2fb9 [ 22.932703] EDAC sbridge: Seeking for: PCI ID 8086:2fbb [ 22.932706] EDAC sbridge: Seeking for: PCI ID 8086:2fbb [ 22.932759] EDAC MC0: Giving out device to module sb_edac controller Haswell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT) [ 22.932761] EDAC sbridge: Ver: 1.1.2 [ 22.990600] intel_rapl_common: Found RAPL domain package [ 22.990607] intel_rapl_common: Found RAPL domain dram [ 22.990610] intel_rapl_common: DRAM domain energy unit 15300pj [ 23.026003] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 23.026005] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 23.026006] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 23.026007] iwlwifi 0000:05:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 [ 23.059071] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 23.194979] iwlwifi 0000:05:00.0 wls1: renamed from wlan0 [ 23.222244] iwlwifi 0000:08:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220 [ 23.228589] thermal thermal_zone1: failed to read out thermal zone (-61) [ 23.240185] iwlwifi 0000:08:00.0: base HW address: XXX [ 23.269408] ieee80211 phy1: Selected rate control algorithm 'iwl-mvm-rs' [ 23.631778] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102) [ 23.632240] snd_hda_intel 0000:03:00.1: enabling device (0100 -> 0102) [ 23.632363] snd_hda_intel 0000:03:00.1: Disabling MSI [ 23.632396] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client [ 23.650525] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input10 [ 23.650635] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input11 [ 23.764755] nvidia: loading out-of-tree module taints kernel. [ 23.764763] nvidia: module license 'NVIDIA' taints kernel. [ 23.764764] Disabling lock debugging due to kernel taint [ 23.771075] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 23.780442] nvidia-nvlink: Nvlink Core is being initialized, major device number 511 [ 23.780788] nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 23.780872] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.144 Wed Jun 2 23:02:41 UTC 2021 (using threaded interrupts) [ 23.868945] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.144 Wed Jun 2 22:58:46 UTC 2021 [ 23.884958] [drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver [ 23.884961] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 0 [ 23.926410] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 23.926415] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 23.926417] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 23.926418] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 23.926419] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 23.926420] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x1a [ 23.926421] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18 [ 23.926422] snd_hda_codec_realtek hdaudioC0D0: Line=0x1b [ 23.974954] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 23.975034] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 23.975109] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 23.975167] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 23.975231] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 24.578729] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c4000-0x000cbfff window] [ 24.578735] caller os_map_kernel_space+0x125/0x160 [nvidia] mapping multiple BARs [ 32.089215] Adding 102399996k swap on /dev/sda4. Priority:-2 extents:1 across:102399996k FS [ 41.455078] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 47.351797] process '/usr/bin/anydesk' started with executable stack [ 49.381406] iwlwifi 0000:05:00.0: Radio type=0x0-0x3-0x1 [ 49.635207] iwlwifi 0000:05:00.0: Radio type=0x0-0x3-0x1 [ 50.900617] e1000e 0000:00:19.0 eno1: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 50.900622] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO [ 50.900667] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 54.676068] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c4000-0x000cbfff window] [ 54.676073] caller os_map_kernel_space+0x125/0x160 [nvidia] mapping multiple BARs [ 54.786688] loop3: detected capacity change from 0 to 8 [ 96.101518] wls1: authenticate with XXX [ 96.123080] wls1: send auth to XXX (try 1/3) [ 96.159217] wls1: authenticated [ 96.163159] wls1: associate with XXX (try 1/3) [ 96.164159] wls1: RX AssocResp from XXX (capab=0x11 status=0 aid=1) [ 96.167152] wls1: associated [ 96.534880] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [ 1782.810215] wls1: deauthenticated from XXX (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 1785.894400] wls1: authenticate with XXX [ 1785.896681] wls1: send auth to XXX (try 1/3) [ 1785.898042] wls1: authenticated [ 1785.898334] wls1: associate with XXX (try 1/3) [ 1785.899449] wls1: RX AssocResp from XXX (capab=0x11 status=0 aid=1) [ 1785.902435] wls1: associated [12298.526846] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [17407.002352] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [17413.086918] wls1: authenticate with XXX [17413.117606] wls1: send auth to XXX (try 1/3) [17413.121039] wls1: authenticated [17413.122727] wls1: associate with XXX (try 1/3) [17413.127287] wls1: RX AssocResp from XXX (capab=0x401 status=0 aid=1) [17413.130112] wls1: associated [17413.130626] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [17492.617581] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [17492.787951] wls1: authenticate with XXX [17492.790125] wls1: send auth to XXX (try 1/3) [17492.791877] wls1: authenticated [17492.795963] wls1: associate with XXX (try 1/3) [17492.806518] wls1: RX AssocResp from XXX (capab=0x401 status=0 aid=1) [17492.814977] wls1: associated [17492.815449] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [17495.600470] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [17496.173323] wls1: authenticate with XXX [17496.175392] wls1: send auth to XXX (try 1/3) [17496.178202] wls1: authenticated [17496.182499] wls1: associate with XXX (try 1/3) [17496.188016] wls1: RX AssocResp from XXX (capab=0x401 status=0 aid=1) [17496.190649] wls1: associated [17496.190953] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [17967.573732] Bluetooth: Core ver 2.22 [17967.573762] NET: Registered protocol family 31 [17967.573763] Bluetooth: HCI device and connection manager initialized [17967.573766] Bluetooth: HCI socket layer initialized [17967.573768] Bluetooth: L2CAP socket layer initialized [17967.573770] Bluetooth: SCO socket layer initialized [17977.901080] device wls1 entered promiscuous mode [18204.929290] device wls1 left promiscuous mode [19533.881355] wls1: authenticate with XXX [19533.883215] wls1: send auth to XXX (try 1/3) [19533.884956] wls1: authenticated [19533.888173] wls1: associate with XXX (try 1/3) [19533.898748] wls1: RX AssocResp from XXX (capab=0x401 status=0 aid=1) [19533.906453] wls1: associated [19533.906914] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [19735.511534] usb 3-10: new full-speed USB device number 6 using xhci_hcd [19735.662198] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [19735.662207] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19735.662211] usb 3-10: Product: Power Control Tools [19735.662214] usb 3-10: Manufacturer: WNC MoCA Adatpor [19735.664871] hid-generic 0003:04B4:6285.0004: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [19737.511907] usb 3-10: USB disconnect, device number 6 [19738.003594] usb 3-10: new full-speed USB device number 7 using xhci_hcd [19738.154117] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [19738.154126] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19738.154130] usb 3-10: Product: Power Control Tools [19738.154133] usb 3-10: Manufacturer: WNC MoCA Adatpor [19738.156074] hid-generic 0003:04B4:6285.0005: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [19837.757511] usb 3-10: USB disconnect, device number 7 [19839.351241] usb 3-10: new full-speed USB device number 8 using xhci_hcd [19839.505822] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [19839.505830] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19839.505833] usb 3-10: Product: Power Control Tools [19839.505836] usb 3-10: Manufacturer: WNC MoCA Adatpor [19839.507378] hid-generic 0003:04B4:6285.0006: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [20841.073423] usb 3-10: USB disconnect, device number 8 [20844.114932] usb 3-10: new full-speed USB device number 9 using xhci_hcd [20844.242983] usb 3-10: Device not responding to setup address. [20844.450952] usb 3-10: Device not responding to setup address. [20844.658900] usb 3-10: device not accepting address 9, error -71 [20844.994908] usb 3-10: new full-speed USB device number 10 using xhci_hcd [20845.145541] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [20845.145550] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [20845.145554] usb 3-10: Product: Power Control Tools [20845.145557] usb 3-10: Manufacturer: WNC MoCA Adatpor [20845.147143] hid-generic 0003:04B4:6285.0007: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [20927.771160] usb 3-10: USB disconnect, device number 10 [21016.021513] usb 3-10: new full-speed USB device number 11 using xhci_hcd [21016.172112] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [21016.172122] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [21016.172126] usb 3-10: Product: Power Control Tools [21016.172129] usb 3-10: Manufacturer: WNC MoCA Adatpor [21016.173640] hid-generic 0003:04B4:6285.0008: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [21023.229663] e1000e 0000:00:19.0 eno1: NIC Link is Down [21047.067753] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [21076.254212] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [21298.481846] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [21298.481915] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [27010.381655] usb 3-10: USB disconnect, device number 11 [27036.598693] usb 3-10: new full-speed USB device number 12 using xhci_hcd [27036.749365] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [27036.749374] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [27036.749378] usb 3-10: Product: Power Control Tools [27036.749381] usb 3-10: Manufacturer: WNC MoCA Adatpor [27036.750942] hid-generic 0003:04B4:6285.0009: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [27622.652838] wls1: authenticate with XXX [27622.653640] wls1: send auth to XXX (try 1/3) [27622.655460] wls1: authenticated [27622.656277] wls1: associate with XXX (try 1/3) [27622.667275] wls1: RX AssocResp from XXX (capab=0x401 status=0 aid=1) [27622.675913] wls1: associated [27622.676260] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [27838.555950] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [27851.699710] wls1: authenticate with XXX [27851.722982] wls1: send auth to XXX (try 1/3) [27851.774324] wls1: authenticated [27851.775294] wls1: associate with XXX (try 1/3) [27851.776259] wls1: RX AssocResp from XXX (capab=0x11 status=0 aid=1) [27851.779154] wls1: associated [27852.015590] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [27946.378349] usb 3-10: USB disconnect, device number 12 [27946.798969] usb 3-10: new full-speed USB device number 13 using xhci_hcd [27946.949473] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [27946.949482] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [27946.949486] usb 3-10: Product: Power Control Tools [27946.949489] usb 3-10: Manufacturer: WNC MoCA Adatpor [27946.950994] hid-generic 0003:04B4:6285.000A: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [28044.189177] usb 3-10: USB disconnect, device number 13 [28057.858492] usb 3-10: new full-speed USB device number 14 using xhci_hcd [28058.009148] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [28058.009157] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [28058.009161] usb 3-10: Product: Power Control Tools [28058.009164] usb 3-10: Manufacturer: WNC MoCA Adatpor [28058.010744] hid-generic 0003:04B4:6285.000B: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [28473.432868] e1000e 0000:00:19.0 eno1: NIC Link is Down [28476.370961] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [28500.509191] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [28719.404624] wls1: authenticate with XXX [28719.435266] wls1: send auth to XXX (try 1/3) [28719.437061] wls1: authenticated [28719.439712] wls1: associate with XXX (try 1/3) [28719.450112] wls1: RX AssocResp from XXX (capab=0x401 status=0 aid=1) [28719.458384] wls1: associated [28719.458810] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [28932.453734] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [28949.629957] wls1: authenticate with XXX [28949.651278] wls1: send auth to XXX (try 1/3) [28949.746629] wls1: authenticated [28949.746798] wls1: waiting for beacon from XXX [28949.846754] wls1: associate with XXX (try 1/3) [28949.849501] wls1: RX AssocResp from XXX (capab=0x1111 status=0 aid=2) [28949.852533] wls1: associated [28949.899040] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [28949.946105] wls1: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [29298.365175] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [29311.392082] usb 3-10: USB disconnect, device number 14 [29314.017242] usb 3-10: new full-speed USB device number 15 using xhci_hcd [29314.167811] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [29314.167822] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29314.167826] usb 3-10: Product: Power Control Tools [29314.167829] usb 3-10: Manufacturer: WNC MoCA Adatpor [29314.169418] hid-generic 0003:04B4:6285.000C: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [29314.410886] usb 3-10: USB disconnect, device number 15 [29317.265240] usb 3-10: new full-speed USB device number 16 using xhci_hcd [29317.415864] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [29317.415874] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29317.415877] usb 3-10: Product: Power Control Tools [29317.415880] usb 3-10: Manufacturer: WNC MoCA Adatpor [29317.417418] hid-generic 0003:04B4:6285.000D: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [29317.891133] usb 3-10: USB disconnect, device number 16 [29318.313202] usb 3-10: new full-speed USB device number 17 using xhci_hcd [29318.463771] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [29318.463781] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29318.463785] usb 3-10: Product: Power Control Tools [29318.463788] usb 3-10: Manufacturer: WNC MoCA Adatpor [29318.465301] hid-generic 0003:04B4:6285.000E: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [29354.275928] usb 3-10: USB disconnect, device number 17 [29356.509097] usb 3-10: new full-speed USB device number 19 using xhci_hcd [29361.849176] e1000e 0000:00:19.0 eno1: NIC Link is Down [29372.257042] usb 3-10: device descriptor read/64, error -110 [29372.515559] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [29372.515569] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29372.515573] usb 3-10: Product: Power Control Tools [29372.515576] usb 3-10: Manufacturer: WNC MoCA Adatpor [29372.517149] hid-generic 0003:04B4:6285.000F: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [29408.380943] usb 3-10: USB disconnect, device number 19 [29410.524882] usb 3-10: new full-speed USB device number 20 using xhci_hcd [29410.675482] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [29410.675491] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29410.675495] usb 3-10: Product: Power Control Tools [29410.675497] usb 3-10: Manufacturer: WNC MoCA Adatpor [29410.678409] hid-generic 0003:04B4:6285.0010: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [29410.752446] usb 3-10: USB disconnect, device number 20 [29411.452868] usb 3-10: new full-speed USB device number 21 using xhci_hcd [29411.603458] usb 3-10: New USB device found, idVendor=04b4, idProduct=6285, bcdDevice= 1.17 [29411.603467] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=... [29411.603471] usb 3-10: Product: Power Control Tools [29411.603474] usb 3-10: Manufacturer: WNC MoCA Adatpor [29411.605688] hid-generic 0003:04B4:6285.0011: hiddev0,hidraw3: USB HID v1.11 Device [WNC MoCA Adatpor Power Control Tools] on usb-0000:00:14.0-10/input0 [29411.871120] usb 3-10: USB disconnect, device number 21 [29480.604580] usb 3-13.1: new full-speed USB device number 22 using xhci_hcd [29481.434383] usb 3-13.1: New USB device found, idVendor=06e6, idProduct=c200, bcdDevice= 0.05 [29481.434392] usb 3-13.1: New USB device strings: Mfr=16, Product=32, SerialNumber=... [29481.434396] usb 3-13.1: Product: USB Internet Phone by TigerJet [29481.434399] usb 3-13.1: Manufacturer: TigerJet Network, Inc. [29481.434402] usb 3-13.1: SerialNumber: ... [29481.444278] hid-generic 0003:06E6:C200.0012: hiddev0,hidraw3: USB HID v1.00 Device [TigerJet Network, Inc. USB Internet Phone by TigerJet] on usb-0000:00:14.0-13.1/input4 [29481.648320] usb-storage 3-13.1:1.0: USB Mass Storage device detected [29481.648533] scsi host8: usb-storage 3-13.1:1.0 [29481.648619] usbcore: registered new interface driver usb-storage [29481.650917] mc: Linux media interface: v0.10 [29481.711715] usbcore: registered new interface driver uas [29481.722185] usbcore: registered new interface driver snd-usb-audio [29482.669074] scsi 8:0:0:0: CD-ROM YMaxCorp magicJackPlus CD 3.00 PQ: 0 ANSI: 2 [29482.669699] sr 8:0:0:0: Power-on or device reset occurred [29482.670627] sr 8:0:0:0: [sr0] scsi3-mmc drive: 0x/0x caddy [29482.670633] cdrom: Uniform CD-ROM driver Revision: 3.20 [29482.716587] sr 8:0:0:0: Attached scsi CD-ROM sr0 [29482.716758] sr 8:0:0:0: Attached scsi generic sg4 type 5 [30325.409672] wls1: authenticate with XXX [30325.411725] wls1: send auth to XXX (try 1/3) [30325.489087] wls1: authenticated [30325.493054] wls1: associate with XXX (try 1/3) [30325.496096] wls1: RX AssocResp from XXX (capab=0x1111 status=0 aid=2) [30325.499471] wls1: associated [30325.553269] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [30325.588277] wls1: Limiting TX power to 30 (30 - 0) dBm as advertised by XXX [35760.872771] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [40893.929817] perf: interrupt took too long (3140 > 3133), lowering kernel.perf_event_max_sample_rate to 63500 [52095.833418] perf: interrupt took too long (3946 > 3925), lowering kernel.perf_event_max_sample_rate to 50500 [75974.226241] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [75974.226245] Bluetooth: BNEP filters: protocol multicast [75974.226249] Bluetooth: BNEP socket layer initialized [76386.144819] show_signal_msg: 18 callbacks suppressed [76386.144832] kcmshell5[337662]: segfault at 900000000 ip 00007f0c7586c0f8 sp 00007ffc462cf8d0 error 4 in kcm_kwindecoration.so[7f0c75861000+14000] [76386.144849] Code: 24 08 31 c0 48 89 e5 e8 66 20 00 00 48 89 ef 48 89 c6 e8 8b 1d 00 00 48 8b 14 24 4c 89 e7 48 63 42 08 48 01 c3 48 8b 44 da 10 <8b> 30 e8 61 1f 00 00 48 89 ef e8 f9 19 00 00 48 8b 44 24 08 64 48 [143721.222582] kcmshell5[599438]: segfault at 562601215730 ip 00007f11b82d89a3 sp 00007ffe610661c0 error 4 in libQt5Gui.so.5.15.3[7f11b8287000+4c8000] [143721.222597] Code: 8b 2d 39 3c 58 00 48 89 07 48 8b 55 00 48 63 42 08 8b 4a 0c 29 c1 85 c9 0f 8e 86 00 00 00 31 db 0f 1f 80 00 00 00 00 48 01 d8 <4c> 8b 6c c2 10 4c 89 ef e8 b0 ed 00 00 84 c0 74 54 4c 89 ef e8 14 [143722.572290] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c4000-0x000cbfff window] [143722.572295] caller os_map_kernel_space+0x125/0x160 [nvidia] mapping multiple BARs [166686.843916] usb 3-13.1: USB disconnect, device number 22 [166701.777142] usb 3-13.1: new high-speed USB device number 23 using xhci_hcd [166702.063303] usb 3-13.1: New USB device found, idVendor=13b1, idProduct=000d, bcdDevice= 0.04 [166702.063312] usb 3-13.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [166702.063316] usb 3-13.1: Product: Wireless-G USB Network Adapter [166702.063319] usb 3-13.1: Manufacturer: Cisco-Linksys [166702.205396] usb 3-13.1: reset high-speed USB device number 23 using xhci_hcd [166702.486339] ieee80211 phy2: rt2x00_set_chip: Info - Chipset detected - rt: 2570, rf: 0005, rev: 0003 [166702.486643] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' [166702.487810] usbcore: registered new interface driver rt2500usb [166702.504562] rt2500usb 3-13.1:1.0 wlx0012179bb63a: renamed from wlan1 [167129.143918] ieee80211 phy2: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x04e0 with error -71 [167129.212386] usb 3-13.1: USB disconnect, device number 23 [167428.095401] wls1: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [167430.487160] wls1: authenticate with XXX [167430.518193] wls1: send auth to XXX (try 1/3) [167430.520005] wls1: authenticated [167430.525783] wls1: associate with XXX (try 1/3) [167430.536347] wls1: RX AssocResp from XXX (capab=0x401 status=0 aid=1) [167430.545489] wls1: associated [167430.546026] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready [170594.738981] perf: interrupt took too long (4996 > 4932), lowering kernel.perf_event_max_sample_rate to 40000