[ 0.000000] Linux version 4.9.155-nrj-desktop-1rosa-x86_64 (XXX@XXX) (gcc version 5.5.0 20171010 (ROSA) (Linaro GCC 5.5-2017.10) ) #1 SMP PREEMPT Fri Feb 8 12:09:09 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.155-nrj-desktop-1rosa-x86_64 root=UUID=HASH_69E-CE39-579B-EAA3-A654AC887FDC ro splash=silent logo.nologo quiet resume=UUID=HASH_BB6-6D34-494C-8227-66E93D707FBD [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfdf1000-0x00000000cfdfffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-870A-UD3/GA-870A-UD3, BIOS F5 08/01/2011 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back [ 0.000000] 5 base 000200000000 mask FFFFE0000000 write-back [ 0.000000] 6 base 000220000000 mask FFFFF0000000 write-back [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4250-0x000f425f] mapped at [ffff8800000f4250] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0xa51bd000, 0xa51bdfff] PGTABLE [ 0.000000] BRK [0xa51be000, 0xa51befff] PGTABLE [ 0.000000] BRK [0xa51bf000, 0xa51bffff] PGTABLE [ 0.000000] BRK [0xa51c0000, 0xa51c0fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x31b10000-0x34d7ffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F5C80 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000CFDF1000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000CFDF1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000CFDF1100 0079AF (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x00000000CFDF0000 000040 [ 0.000000] ACPI: SSDT 0x00000000CFDF8B80 00088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0x00000000CFDF9440 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000CFDF9480 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: MATS 0x00000000CFDF94C0 000034 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 0x00000000CFDF9530 0000F2 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 0x00000000CFDF8AC0 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x22fffa000-0x22fffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cfdeffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000022fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff] [ 0.000000] On node 0 totalpages: 2096526 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13240 pages used for memmap [ 0.000000] DMA32 zone: 847344 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1245184 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdf0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfdf1000-0xcfdfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff88022fc00000 s108952 r8192 d30312 u262144 [ 0.000000] pcpu-alloc: s108952 r8192 d30312 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063745 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.155-nrj-desktop-1rosa-x86_64 root=UUID=HASH_69E-CE39-579B-EAA3-A654AC887FDC ro splash=silent logo.nologo quiet resume=UUID=HASH_BB6-6D34-494C-8227-66E93D707FBD [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] AGP: Node 0: aperture [bus addr 0xfe0e000000-0xfe0fffffff] (32MB) [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup [ 0.000000] AGP: This costs you 64MB of RAM [ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.000000] Memory: 8052388K/8386104K available (8199K kernel code, 1382K rwdata, 3700K rodata, 1468K init, 932K bss, 333716K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:488 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3214.705 MHz processor [ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.41 BogoMIPS (lpj=3214705) [ 0.000021] pid_max: default: 32768 minimum: 301 [ 0.000027] ACPI: Core revision 20160831 [ 0.002552] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.002572] Security Framework initialized [ 0.002574] SELinux: Disabled at boot. [ 0.002886] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004921] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005869] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.005876] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.006146] mce: CPU supports 6 MCE banks [ 0.006151] LVT offset 0 assigned for vector 0xf9 [ 0.006155] process: using AMD E400 aware idle routine [ 0.006156] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.006157] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.006159] Spectre V2 : Mitigation: Full AMD retpoline [ 0.006159] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.013641] Freeing SMP alternatives memory: 32K [ 0.049655] ftrace: allocating 31102 entries in 122 pages [ 0.866691] smpboot: Max logical packages: 2 [ 0.867169] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.978866] smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (family: 0x10, model: 0x4, stepping: 0x3) [ 0.978870] Performance Events: AMD PMU driver. [ 0.978873] ... version: 0 [ 0.978873] ... bit width: 48 [ 0.978874] ... generic registers: 4 [ 0.978874] ... value mask: 0000ffffffffffff [ 0.978875] ... max period: 00007fffffffffff [ 0.978875] ... fixed-purpose events: 0 [ 0.978876] ... event mask: 000000000000000f [ 0.978916] process: System has AMD C1E enabled [ 0.978925] process: Switch to broadcast mode on CPU0 [ 0.987206] MCE: In-kernel MCE decoding enabled. [ 0.995958] x86: Booting SMP configuration: [ 0.995959] .... node #0, CPUs: #1 [ 0.998587] process: Switch to broadcast mode on CPU1 [ 1.004973] #2 [ 1.007551] process: Switch to broadcast mode on CPU2 [ 1.013967] #3 [ 1.016548] process: Switch to broadcast mode on CPU3 [ 1.016581] x86: Booted up 1 node, 4 CPUs [ 1.016583] smpboot: Total of 4 processors activated (25717.64 BogoMIPS) [ 1.021374] devtmpfs: initialized [ 1.021426] x86/mm: Memory block size: 128MB [ 1.024451] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf0fff] (4096 bytes) [ 1.024505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.024515] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.024567] xor: measuring software checksum speed [ 1.033944] prefetch64-sse: 15496.000 MB/sec [ 1.043943] generic_sse: 14372.000 MB/sec [ 1.043944] xor: using function: prefetch64-sse (15496.000 MB/sec) [ 1.043947] pinctrl core: initialized pinctrl subsystem [ 1.043982] RTC time: 10:00:41, date: 08/04/20 [ 1.044061] NET: Registered protocol family 16 [ 1.048984] cpuidle: using governor ladder [ 1.053982] cpuidle: using governor menu [ 1.053987] node 0 link 0: io port [9000, ffff] [ 1.053989] TOM: 00000000d0000000 aka 3328M [ 1.053991] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 1.053992] node 0 link 0: mmio [a0000, bffff] [ 1.053993] node 0 link 0: mmio [d0000000, dfffffff] [ 1.053995] node 0 link 0: mmio [f0000000, fe02ffff] [ 1.053996] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff] [ 1.053997] TOM2: 0000000230000000 aka 8960M [ 1.053999] bus: [bus 00-06] on node 0 link 0 [ 1.053999] bus: 00 [io 0x0000-0xffff] [ 1.054000] bus: 00 [mem 0x000a0000-0x000bffff] [ 1.054000] bus: 00 [mem 0xd0000000-0xdfffffff] [ 1.054001] bus: 00 [mem 0xe0700000-0xffffffff] [ 1.054001] bus: 00 [mem 0xe0100000-0xe06fffff] [ 1.054002] bus: 00 [mem 0x230000000-0xfcffffffff] [ 1.054049] ACPI: bus type PCI registered [ 1.054050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.054104] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.054105] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 1.054120] PCI: Using configuration type 1 for base access [ 1.054370] mtrr: your CPUs had inconsistent variable MTRR settings [ 1.054371] mtrr: probably your BIOS does not setup all CPUs. [ 1.054371] mtrr: corrected configuration. [ 1.060132] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.060133] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.076945] raid6: sse2x1 gen() 4183 MB/s [ 1.093948] raid6: sse2x1 xor() 4478 MB/s [ 1.110948] raid6: sse2x2 gen() 6976 MB/s [ 1.127940] raid6: sse2x2 xor() 7335 MB/s [ 1.144951] raid6: sse2x4 gen() 8394 MB/s [ 1.146944] random: fast init done [ 1.161941] raid6: sse2x4 xor() 3675 MB/s [ 1.161942] raid6: using algorithm sse2x4 gen() 8394 MB/s [ 1.161943] raid6: .... xor() 3675 MB/s, rmw enabled [ 1.161944] raid6: using intx1 recovery algorithm [ 1.162001] ACPI: Added _OSI(Module Device) [ 1.162001] ACPI: Added _OSI(Processor Device) [ 1.162002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.162002] ACPI: Added _OSI(Processor Aggregator Device) [ 1.166189] ACPI: Interpreter enabled [ 1.166206] ACPI: (supports S0 S3 S4 S5) [ 1.166208] ACPI: Using IOAPIC for interrupt routing [ 1.166231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.170115] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.170120] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.170123] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.170321] PCI host bridge to bus 0000:00 [ 1.170323] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.170324] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.170326] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.170327] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.170328] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 1.170329] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.170337] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000 [ 1.170346] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.170424] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 1.170455] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 1.170496] pci 0000:00:02.0: System wakeup disabled by ACPI [ 1.170528] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400 [ 1.170556] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 1.170594] pci 0000:00:09.0: System wakeup disabled by ACPI [ 1.170620] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400 [ 1.170647] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 1.170686] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 1.170722] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 1.170736] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 1.170744] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 1.170752] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 1.170759] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 1.170767] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 1.170775] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 1.170793] pci 0000:00:11.0: set SATA to AHCI mode [ 1.170874] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 1.170885] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 1.170975] pci 0000:00:12.0: System wakeup disabled by ACPI [ 1.171005] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 1.171019] pci 0000:00:12.2: reg 0x10: [mem 0xfe02d000-0xfe02d0ff] [ 1.171086] pci 0000:00:12.2: supports D1 D2 [ 1.171087] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 1.171126] pci 0000:00:12.2: System wakeup disabled by ACPI [ 1.171158] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 1.171169] pci 0000:00:13.0: reg 0x10: [mem 0xfe02c000-0xfe02cfff] [ 1.171252] pci 0000:00:13.0: System wakeup disabled by ACPI [ 1.171283] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 1.171297] pci 0000:00:13.2: reg 0x10: [mem 0xfe02b000-0xfe02b0ff] [ 1.171364] pci 0000:00:13.2: supports D1 D2 [ 1.171365] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 1.171404] pci 0000:00:13.2: System wakeup disabled by ACPI [ 1.171435] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 1.171548] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 1.171559] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 1.171566] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 1.171574] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 1.171582] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 1.171589] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 1.171607] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.171608] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.171609] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.171609] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.171674] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 1.171691] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 1.171747] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 1.171785] pci 0000:00:14.2: System wakeup disabled by ACPI [ 1.171812] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 1.171926] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 1.171995] pci 0000:00:14.4: System wakeup disabled by ACPI [ 1.172022] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 1.172033] pci 0000:00:14.5: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 1.172116] pci 0000:00:14.5: System wakeup disabled by ACPI [ 1.172149] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 1.172211] pci 0000:00:15.0: supports D1 D2 [ 1.172253] pci 0000:00:15.0: System wakeup disabled by ACPI [ 1.172283] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 1.172345] pci 0000:00:15.1: supports D1 D2 [ 1.172388] pci 0000:00:15.1: System wakeup disabled by ACPI [ 1.172421] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 1.172432] pci 0000:00:16.0: reg 0x10: [mem 0xfe029000-0xfe029fff] [ 1.172516] pci 0000:00:16.0: System wakeup disabled by ACPI [ 1.172546] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 1.172559] pci 0000:00:16.2: reg 0x10: [mem 0xfe028000-0xfe0280ff] [ 1.172627] pci 0000:00:16.2: supports D1 D2 [ 1.172628] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 1.172668] pci 0000:00:16.2: System wakeup disabled by ACPI [ 1.172697] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 1.172756] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 1.172811] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 1.172867] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 1.172927] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 1.173028] pci 0000:01:00.0: [1002:6739] type 00 class 0x030000 [ 1.173042] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.173052] pci 0000:01:00.0: reg 0x18: [mem 0xfdec0000-0xfdedffff 64bit] [ 1.173059] pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff] [ 1.173071] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.173108] pci 0000:01:00.0: supports D1 D2 [ 1.173149] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300 [ 1.173163] pci 0000:01:00.1: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit] [ 1.173226] pci 0000:01:00.1: supports D1 D2 [ 1.175988] pci 0000:00:02.0: PCI bridge to [bus 01] [ 1.175992] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 1.175994] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff] [ 1.175996] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.176041] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330 [ 1.176057] pci 0000:02:00.0: reg 0x10: [mem 0xfdbfe000-0xfdbfffff 64bit] [ 1.176133] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.178987] pci 0000:00:09.0: PCI bridge to [bus 02] [ 1.178990] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.178992] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 1.178994] pci 0000:00:09.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 1.179038] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185 [ 1.179105] pci 0000:03:00.0: reg 0x24: [mem 0xfd5fe000-0xfd5fffff] [ 1.179157] pci 0000:03:00.0: PME# supported from D3hot [ 1.179205] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185 [ 1.179218] pci 0000:03:00.1: reg 0x10: [io 0xcf00-0xcf07] [ 1.179225] pci 0000:03:00.1: reg 0x14: [io 0xce00-0xce03] [ 1.179232] pci 0000:03:00.1: reg 0x18: [io 0xcd00-0xcd07] [ 1.179239] pci 0000:03:00.1: reg 0x1c: [io 0xcc00-0xcc03] [ 1.179246] pci 0000:03:00.1: reg 0x20: [io 0xcb00-0xcb0f] [ 1.179319] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.179325] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 1.179327] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 1.179328] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 1.179331] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.179378] pci 0000:04:0e.0: [104c:8024] type 00 class 0x0c0010 [ 1.179396] pci 0000:04:0e.0: reg 0x10: [mem 0xfddff000-0xfddff7ff] [ 1.179407] pci 0000:04:0e.0: reg 0x14: [mem 0xfddf8000-0xfddfbfff] [ 1.179489] pci 0000:04:0e.0: supports D1 D2 [ 1.179490] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot [ 1.179542] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) [ 1.179545] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 1.179548] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 1.179551] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 1.179552] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 1.179553] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.179554] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.179556] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 1.179557] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode) [ 1.179609] pci 0000:05:00.0: [197b:2363] type 00 class 0x010185 [ 1.179699] pci 0000:05:00.0: reg 0x24: [mem 0xfdafe000-0xfdafffff] [ 1.179766] pci 0000:05:00.0: PME# supported from D3hot [ 1.179817] pci 0000:05:00.1: [197b:2363] type 00 class 0x010185 [ 1.179836] pci 0000:05:00.1: reg 0x10: [io 0xaf00-0xaf07] [ 1.179845] pci 0000:05:00.1: reg 0x14: [io 0xae00-0xae03] [ 1.179854] pci 0000:05:00.1: reg 0x18: [io 0xad00-0xad07] [ 1.179864] pci 0000:05:00.1: reg 0x1c: [io 0xac00-0xac03] [ 1.179873] pci 0000:05:00.1: reg 0x20: [io 0xab00-0xab0f] [ 1.179975] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.179983] pci 0000:00:15.0: PCI bridge to [bus 05] [ 1.179987] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 1.179990] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff] [ 1.179994] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 1.180046] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 [ 1.180065] pci 0000:06:00.0: reg 0x10: [io 0x9e00-0x9eff] [ 1.180093] pci 0000:06:00.0: reg 0x18: [mem 0xfd7ff000-0xfd7fffff 64bit pref] [ 1.180110] pci 0000:06:00.0: reg 0x20: [mem 0xfd7f8000-0xfd7fbfff 64bit pref] [ 1.180121] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.180201] pci 0000:06:00.0: supports D1 D2 [ 1.180202] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.182992] pci 0000:00:15.1: PCI bridge to [bus 06] [ 1.182997] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff] [ 1.182999] pci 0000:00:15.1: bridge window [mem 0xfd800000-0xfd8fffff] [ 1.183003] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.183219] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 [ 1.183254] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 [ 1.183288] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 [ 1.183320] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 [ 1.183352] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 [ 1.183385] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 [ 1.183417] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 [ 1.183449] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 [ 1.183988] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 1.183989] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.183991] vgaarb: loaded [ 1.183991] vgaarb: bridge control possible 0000:01:00.0 [ 1.184132] SCSI subsystem initialized [ 1.184175] libata version 3.00 loaded. [ 1.184178] ACPI: bus type USB registered [ 1.184191] usbcore: registered new interface driver usbfs [ 1.184199] usbcore: registered new interface driver hub [ 1.184214] usbcore: registered new device driver usb [ 1.184311] PCI: Using ACPI for IRQ routing [ 1.191605] PCI: pci_cache_line_size set to 64 bytes [ 1.191673] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 1.191674] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff] [ 1.191750] NetLabel: Initializing [ 1.191751] NetLabel: domain hash size = 128 [ 1.191751] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.191761] NetLabel: unlabeled traffic allowed by default [ 1.191857] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.191860] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 1.193920] clocksource: Switched to clocksource hpet [ 1.200257] VFS: Disk quotas dquot_6.6.0 [ 1.200275] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.200346] pnp: PnP ACPI init [ 1.200435] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 1.200436] system 00:00: [io 0x0220-0x0225] has been reserved [ 1.200437] system 00:00: [io 0x0290-0x0294] has been reserved [ 1.200440] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.200647] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.200656] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.200676] system 00:01: [io 0x4100-0x411f] has been reserved [ 1.200677] system 00:01: [io 0x0228-0x022f] has been reserved [ 1.200678] system 00:01: [io 0x040b] has been reserved [ 1.200680] system 00:01: [io 0x04d6] has been reserved [ 1.200681] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 1.200682] system 00:01: [io 0x0c14] has been reserved [ 1.200683] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 1.200684] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 1.200685] system 00:01: [io 0x0c6f] has been reserved [ 1.200687] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 1.200688] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 1.200689] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 1.200690] system 00:01: [io 0x4000-0x40fe] has been reserved [ 1.200691] system 00:01: [io 0x4210-0x4217] has been reserved [ 1.200692] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 1.200694] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 1.200695] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 1.200696] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 1.200698] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.200805] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.201044] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.201201] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.201309] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.201311] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.201420] system 00:06: [mem 0x000f0000-0x000f3fff] could not be reserved [ 1.201422] system 00:06: [mem 0x000f4000-0x000f7fff] could not be reserved [ 1.201423] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved [ 1.201424] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved [ 1.201425] system 00:06: [mem 0xcfdf0000-0xcfdfffff] could not be reserved [ 1.201426] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved [ 1.201428] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.201429] system 00:06: [mem 0x00100000-0xcfdeffff] could not be reserved [ 1.201430] system 00:06: [mem 0xcfe00000-0xcfefffff] has been reserved [ 1.201431] system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved [ 1.201433] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.201434] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved [ 1.201435] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved [ 1.201437] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.201451] pnp: PnP ACPI: found 7 devices [ 1.208064] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.208096] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref] [ 1.208097] pci 0000:00:02.0: PCI bridge to [bus 01] [ 1.208099] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 1.208101] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff] [ 1.208103] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.208105] pci 0000:00:09.0: PCI bridge to [bus 02] [ 1.208107] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.208109] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 1.208110] pci 0000:00:09.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 1.208113] pci 0000:00:0a.0: PCI bridge to [bus 03] [ 1.208114] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] [ 1.208116] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff] [ 1.208117] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.208120] pci 0000:00:14.4: PCI bridge to [bus 04] [ 1.208122] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff] [ 1.208126] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff] [ 1.208129] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref] [ 1.208134] pci 0000:00:15.0: PCI bridge to [bus 05] [ 1.208135] pci 0000:00:15.0: bridge window [io 0xa000-0xafff] [ 1.208139] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff] [ 1.208141] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 1.208146] pci 0000:06:00.0: BAR 6: assigned [mem 0xfd800000-0xfd81ffff pref] [ 1.208147] pci 0000:00:15.1: PCI bridge to [bus 06] [ 1.208149] pci 0000:00:15.1: bridge window [io 0x9000-0x9fff] [ 1.208152] pci 0000:00:15.1: bridge window [mem 0xfd800000-0xfd8fffff] [ 1.208154] pci 0000:00:15.1: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.208160] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.208161] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.208162] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.208163] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 1.208164] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window] [ 1.208165] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.208166] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] [ 1.208167] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.208169] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 1.208170] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 1.208171] pci_bus 0000:02: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref] [ 1.208172] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 1.208173] pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd5fffff] [ 1.208174] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.208175] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 1.208176] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 1.208177] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref] [ 1.208178] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 1.208179] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 1.208180] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.208181] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window] [ 1.208182] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff window] [ 1.208184] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 1.208185] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff] [ 1.208186] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 1.208187] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] [ 1.208188] pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff] [ 1.208189] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref] [ 1.208240] NET: Registered protocol family 2 [ 1.208388] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 1.208536] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.208779] TCP: Hash tables configured (established 65536 bind 65536) [ 1.208818] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.208857] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.208939] NET: Registered protocol family 1 [ 1.473261] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.473388] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 1.473391] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 1.473397] pci 0000:05:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 1.473401] pci 0000:05:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 1.473407] PCI: CLS 64 bytes, default 64 [ 1.473455] Trying to unpack rootfs image as initramfs... [ 1.952292] Freeing initrd memory: 51648K [ 1.952534] PCI-DMA: Disabling AGP. [ 1.952621] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.952621] PCI-DMA: using GART IOMMU. [ 1.952623] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.955348] LVT offset 1 assigned for vector 0x400 [ 1.955356] IBS: LVT offset 1 assigned [ 1.955489] perf: AMD IBS detected (0x0000001f) [ 1.956206] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.957504] zbud: loaded [ 1.959958] Key type asymmetric registered [ 1.960001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.960042] io scheduler noop registered [ 1.960042] io scheduler deadline registered [ 1.960050] io scheduler cfq registered [ 1.960074] io scheduler bfq registered (default) [ 1.960075] BFQ I/O-scheduler: v8r7 (with cgroups support) [ 1.960683] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.960687] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.960716] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.960717] vesafb: scrolling: redraw [ 1.960718] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.960730] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001400000, using 3072k, total 3072k [ 1.976645] Console: switching to colour frame buffer device 128x48 [ 1.992417] fb0: VESA VGA frame buffer device [ 1.992475] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.992477] ACPI: Power Button [PWRB] [ 1.992509] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.992510] ACPI: Power Button [PWRF] [ 1.992528] ACPI: ACPI: processor limited to max C-state 1 [ 1.992767] GHES: HEST is not enabled! [ 1.992844] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.013469] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.013818] Linux agpgart interface v0.103 [ 2.016205] brd: module loaded [ 2.016326] ahci 0000:00:11.0: version 3.0 [ 2.016499] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.016501] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.016963] scsi host0: ahci [ 2.017075] scsi host1: ahci [ 2.017173] scsi host2: ahci [ 2.017268] scsi host3: ahci [ 2.017298] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 19 [ 2.017300] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 19 [ 2.017302] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 19 [ 2.017303] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 19 [ 2.017430] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.017432] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.017686] scsi host4: ahci [ 2.017782] scsi host5: ahci [ 2.017811] ata5: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe100 irq 18 [ 2.017813] ata6: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe180 irq 18 [ 2.028035] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.028037] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.028325] scsi host6: ahci [ 2.028428] scsi host7: ahci [ 2.028459] ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 17 [ 2.028461] ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 17 [ 2.028507] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.062156] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 2.062157] i8042: If AUX port is really absent please use the 'i8042.noaux' option [ 2.315057] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.315176] mousedev: PS/2 mouse device common for all mice [ 2.315289] rtc_cmos 00:02: RTC can wake from S4 [ 2.315397] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.315428] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.315463] device-mapper: uevent: version 1.0.3 [ 2.315516] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: XXX@XXX [ 2.315583] ledtrig-cpu: registered to indicate activity on CPUs [ 2.315677] Key type dns_resolver registered [ 2.315677] mpls_gso: MPLS GSO support [ 2.315850] microcode: CPU0: patch_level=0x010000c8 [ 2.315857] microcode: CPU1: patch_level=0x010000c8 [ 2.315864] microcode: CPU2: patch_level=0x010000c8 [ 2.315868] microcode: CPU3: patch_level=0x010000c8 [ 2.315900] microcode: Microcode Update Driver: v2.01 <XXX@XXX>, Peter Oruba [ 2.316044] registered taskstats version 1 [ 2.316064] zswap: loaded using pool lzo/zbud [ 2.316414] Btrfs loaded, crc32c=crc32c-generic [ 2.319165] Key type encrypted registered [ 2.319167] ima: No TPM chip found, activating TPM-bypass! [ 2.319169] ima: Allocated hash algorithm: sha1 [ 2.319445] Magic number: 0:333:21 [ 2.319476] pcieport 0000:00:09.0: hash matches [ 2.319491] memory memory61: hash matches [ 2.319530] rtc_cmos 00:02: setting system clock to 2020-08-04 10:00:42 UTC (1596535242) [ 2.319531] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.319531] EDD information not available. [ 2.319559] PM: Checking hibernation image partition UUID=HASH_BB6-6D34-494C-8227-66E93D707FBD [ 2.329171] ata5: SATA link down (SStatus 0 SControl 300) [ 2.329211] ata6: SATA link down (SStatus 0 SControl 300) [ 2.337086] ata7: SATA link down (SStatus 0 SControl 300) [ 2.337128] ata8: SATA link down (SStatus 0 SControl 300) [ 2.483044] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.483065] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.483087] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.483115] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.483178] ata2.00: ATA-11: KINGSTON SA400S37120G, SBFK71E0, max UDMA/133 [ 2.483179] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.483288] ata2.00: configured for UDMA/133 [ 2.483627] ata1.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100 [ 2.483628] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.484230] ata1.00: configured for UDMA/100 [ 2.484426] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5 [ 2.485213] ata3.00: ATAPI: ASUS DRW-24F1MT, 1.00, max UDMA/100 [ 2.485964] ata4.00: ATAPI: ATAPI iHAS122, ZL0E, max UDMA/100 [ 2.486067] ata3.00: configured for UDMA/100 [ 2.486749] ata4.00: configured for UDMA/100 [ 2.498147] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.498149] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.498253] scsi 1:0:0:0: Direct-Access ATA KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5 [ 2.498262] sd 0:0:0:0: [sda] Write Protect is off [ 2.498264] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.498301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.511139] sda: sda1 sda2 sda3 [ 2.511575] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.514084] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.514239] sd 1:0:0:0: [sdb] Write Protect is off [ 2.514241] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.514276] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.515213] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 2.515693] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.516172] scsi 2:0:0:0: CD-ROM ASUS DRW-24F1MT 1.00 PQ: 0 ANSI: 5 [ 2.533018] scsi 3:0:0:0: CD-ROM ATAPI iHAS122 ZL0E PQ: 0 ANSI: 5 [ 2.544689] PM: Hibernation image not present or could not be loaded. [ 2.962934] tsc: Refined TSC clocksource calibration: 3214.678 MHz [ 2.962946] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e56740c436, max_idle_ns: 440795289331 ns [ 3.144799] Freeing unused kernel memory: 1468K [ 3.144800] Write protecting the kernel read-only data: 14336k [ 3.147144] Freeing unused kernel memory: 2024K [ 3.148024] Freeing unused kernel memory: 396K [ 3.154158] systemd[1]: Inserted module 'autofs4' [ 3.171766] NET: Registered protocol family 10 [ 3.174371] cgroup: cgroup2: unknown option "nsdelegate" [ 3.174847] random: systemd: uninitialized urandom read (16 bytes read) [ 3.175015] systemd[1]: systemd 243 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 3.175100] systemd[1]: Detected architecture x86-64. [ 3.175102] systemd[1]: Running in initial RAM disk. [ 3.175129] random: systemd: uninitialized urandom read (16 bytes read) [ 3.175137] random: systemd: uninitialized urandom read (16 bytes read) [ 3.176887] systemd[1]: No hostname configured. [ 3.176890] systemd[1]: Set hostname to ... [ 3.176917] systemd[1]: Initializing machine ID from random generator. [ 3.233576] systemd[1]: system-systemd\x2dhibernate\x2dresume.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 3.233579] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 3.233977] systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. [ 3.234061] systemd[1]: Reached target Slices. [ 3.406496] RPC: Registered named UNIX socket transport module. [ 3.406498] RPC: Registered udp transport module. [ 3.406498] RPC: Registered tcp transport module. [ 3.406498] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.600665] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 3.612675] wmi: Mapper loaded [ 3.618746] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 3.624305] scsi host8: pata_jmicron [ 3.627021] QUIRK: Enable AMD PLL fix [ 3.627038] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 3.627044] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 3.627155] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004 [ 3.627296] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.627297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.627298] usb usb1: Product: xHCI Host Controller [ 3.627299] usb usb1: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 xhci-hcd [ 3.627300] usb usb1: SerialNumber: ... [ 3.627584] hub 1-0:1.0: USB hub found [ 3.627591] hub 1-0:1.0: 2 ports detected [ 3.627677] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 3.627680] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 3.628673] scsi host9: pata_jmicron [ 3.628717] ata9: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 19 [ 3.628718] ata10: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 19 [ 3.628851] pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001) [ 3.630527] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.630543] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 3.630544] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.630545] usb usb2: Product: xHCI Host Controller [ 3.630546] usb usb2: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 xhci-hcd [ 3.630547] usb usb2: SerialNumber: ... [ 3.630635] hub 2-0:1.0: USB hub found [ 3.630644] hub 2-0:1.0: 2 ports detected [ 3.630841] scsi host10: pata_jmicron [ 3.630972] scsi host11: pata_jmicron [ 3.631002] ata11: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17 [ 3.631003] ata12: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17 [ 3.634046] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.636798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.636799] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 3.637295] ehci-pci: EHCI PCI platform driver [ 3.637439] ehci-pci 0000:00:12.2: EHCI Host Controller [ 3.637443] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 3.637447] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.637455] ehci-pci 0000:00:12.2: debug port 1 [ 3.637483] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02d000 [ 3.645952] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.645954] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.646129] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 3.647865] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.647873] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.648254] r8169 0000:06:00.0 eth0: RTL8168d/8111d at 0xffffc90000d65000, XX:XX:XX:XX:XX:XX, XID 083000c0 IRQ 32 [ 3.648256] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.648481] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 3.648540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.648541] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.648542] usb usb3: Product: EHCI Host Controller [ 3.648543] usb usb3: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 ehci_hcd [ 3.648544] usb usb3: SerialNumber: ... [ 3.649306] hub 3-0:1.0: USB hub found [ 3.649314] hub 3-0:1.0: 5 ports detected [ 3.650969] scsi host12: pata_atiixp [ 3.652395] [drm] Initialized [ 3.658927] scsi host13: pata_atiixp [ 3.658978] ata13: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 3.658979] ata14: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 3.659159] ehci-pci 0000:00:13.2: EHCI Host Controller [ 3.659164] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 3.659168] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.659177] ehci-pci 0000:00:13.2: debug port 1 [ 3.659207] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe02b000 [ 3.665052] sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.665203] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 3.665920] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 3.665957] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.665958] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.665959] usb usb4: Product: EHCI Host Controller [ 3.665960] usb usb4: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 ehci_hcd [ 3.665961] usb usb4: SerialNumber: ... [ 3.666052] hub 4-0:1.0: USB hub found [ 3.666057] hub 4-0:1.0: 5 ports detected [ 3.667188] ehci-pci 0000:00:16.2: EHCI Host Controller [ 3.667193] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5 [ 3.667196] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 3.667205] ehci-pci 0000:00:16.2: debug port 1 [ 3.667234] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe028000 [ 3.673933] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 3.673992] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.673993] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.673994] usb usb5: Product: EHCI Host Controller [ 3.673995] usb usb5: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 ehci_hcd [ 3.673996] usb usb5: SerialNumber: ... [ 3.675434] hub 5-0:1.0: USB hub found [ 3.675440] hub 5-0:1.0: 4 ports detected [ 3.676438] ohci-pci: OHCI PCI platform driver [ 3.676560] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 3.676566] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 3.676585] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe02e000 [ 3.713129] PM: Starting manual resume from disk [ 3.713133] PM: Hibernation image partition 8:21 present [ 3.713133] PM: Looking for hibernation image. [ 3.720951] PM: Image not found (code -22) [ 3.720954] PM: Hibernation image not present or could not be loaded. [ 3.723001] [drm] radeon kernel modesetting enabled. [ 3.724976] AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 3.724977] AMD IOMMUv2 functionality not available on this system [ 3.726959] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 3.730328] CRAT table not found [ 3.730329] Finished initializing topology ret=0 [ 3.730345] kfd kfd: Initialized module [ 3.730534] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 3.730535] fb: switching to radeondrmfb from VESA VGA [ 3.730566] Console: switching to colour dummy device 80x25 [ 3.730812] [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x1787:0x2304 0x00). [ 3.730823] [drm] register mmio base: 0xFDEC0000 [ 3.730823] [drm] register mmio size: 131072 [ 3.731160] ATOM BIOS: BARTS [ 3.731317] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 3.731318] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 3.731321] [drm] Detected VRAM RAM=1024M, BAR=256M [ 3.731321] [drm] RAM width 256bits DDR [ 3.731369] [TTM] Zone kernel: Available graphics memory: 4086954 kiB [ 3.731370] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.731371] [TTM] Initializing pool allocator [ 3.731375] [TTM] Initializing DMA pool allocator [ 3.731399] [drm] radeon: 1024M of VRAM memory ready [ 3.731400] [drm] radeon: 1024M of GTT memory ready. [ 3.731408] [drm] Loading BARTS Microcode [ 3.731486] [drm] Internal thermal controller with fan control [ 3.733790] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.733792] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.733793] usb usb6: Product: OHCI PCI host controller [ 3.733794] usb usb6: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 ohci_hcd [ 3.733795] usb usb6: SerialNumber: ... [ 3.734128] hub 6-0:1.0: USB hub found [ 3.734144] hub 6-0:1.0: 5 ports detected [ 3.734663] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 3.734669] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 3.734703] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02c000 [ 3.736549] [drm] radeon: dpm initialized [ 3.736674] r8169 0000:06:00.0 enp6s0: renamed from eth0 [ 3.736678] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.737720] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 3.762849] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 3.762967] radeon 0000:01:00.0: WB enabled [ 3.762970] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880219427c00 [ 3.762971] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880219427c0c [ 3.763758] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001832118 [ 3.763760] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.763760] [drm] Driver supports precise vblank timestamp query. [ 3.763761] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 3.763805] radeon 0000:01:00.0: radeon: using MSI. [ 3.763842] [drm] radeon: irq initialized. [ 3.780330] [drm] ring test on 0 succeeded in 2 usecs [ 3.780341] [drm] ring test on 3 succeeded in 7 usecs [ 3.790006] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.790008] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.790009] usb usb7: Product: OHCI PCI host controller [ 3.790010] usb usb7: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 ohci_hcd [ 3.790011] usb usb7: SerialNumber: ... [ 3.790124] hub 7-0:1.0: USB hub found [ 3.790131] hub 7-0:1.0: 5 ports detected [ 3.790376] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 3.790380] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8 [ 3.790399] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe02a000 [ 3.845995] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.845997] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.845998] usb usb8: Product: OHCI PCI host controller [ 3.845999] usb usb8: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 ohci_hcd [ 3.846000] usb usb8: SerialNumber: ... [ 3.846115] hub 8-0:1.0: USB hub found [ 3.846122] hub 8-0:1.0: 2 ports detected [ 3.846337] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 3.846342] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9 [ 3.846363] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe029000 [ 3.901984] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.901986] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.901987] usb usb9: Product: OHCI PCI host controller [ 3.901988] usb usb9: Manufacturer: Linux 4.9.155-nrj-desktop-1rosa-x86_64 ohci_hcd [ 3.901989] usb usb9: SerialNumber: ... [ 3.902102] hub 9-0:1.0: USB hub found [ 3.902108] hub 9-0:1.0: 4 ports detected [ 3.958005] [drm] ring test on 5 succeeded in 2 usecs [ 3.958014] [drm] UVD initialized successfully. [ 3.958164] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.958218] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.962909] usb 3-3: new high-speed USB device number 2 using ehci-pci [ 3.971010] clocksource: Switched to clocksource tsc [ 4.083309] usb 3-3: New USB device found, idVendor=058f, idProduct=6364 [ 4.083310] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.083312] usb 3-3: Product: Mass Storage Device [ 4.083312] usb 3-3: Manufacturer: Generic [ 4.083313] usb 3-3: SerialNumber: ... [ 4.087648] usb-storage 3-3:1.0: USB Mass Storage device detected [ 4.089004] scsi host14: usb-storage 3-3:1.0 [ 4.089074] usbcore: registered new interface driver usb-storage [ 4.089745] hidraw: raw HID events driver (C) Jiri Kosina [ 4.090111] usbcore: registered new interface driver uas [ 4.093914] usbcore: registered new interface driver usbhid [ 4.093915] usbhid: USB HID core driver [ 4.095137] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:12.2-3/input1 [ 4.186941] usb 3-5: new high-speed USB device number 3 using ehci-pci [ 4.232945] usb 9-4: new full-speed USB device number 2 using ohci-pci [ 4.235027] firewire_core 0000:04:0e.0: created device fw0: GUID 00bee692006cf049, S400 [ 4.385989] usb 9-4: New USB device found, idVendor=062a, idProduct=4101 [ 4.385991] usb 9-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.385992] usb 9-4: Product: 2.4G Keyboard Mouse [ 4.385993] usb 9-4: Manufacturer: MOSART Semi. [ 4.392207] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.0/0003:062A:4101.0002/input/input3 [ 4.444038] hid-generic 0003:062A:4101.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:16.0-4/input0 [ 4.448419] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.1/0003:062A:4101.0003/input/input4 [ 4.500073] hid-generic 0003:062A:4101.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:16.0-4/input1 [ 4.610982] [drm] ib test on ring 5 succeeded [ 4.611407] [drm] Radeon Display Connectors [ 4.611408] [drm] Connector 0: [ 4.611408] [drm] DP-1 [ 4.611408] [drm] HPD4 [ 4.611410] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 4.611410] [drm] Encoders: [ 4.611411] [drm] DFP1: INTERNAL_UNIPHY2 [ 4.611411] [drm] Connector 1: [ 4.611411] [drm] DP-2 [ 4.611412] [drm] HPD5 [ 4.611413] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 4.611413] [drm] Encoders: [ 4.611413] [drm] DFP2: INTERNAL_UNIPHY2 [ 4.611414] [drm] Connector 2: [ 4.611414] [drm] HDMI-A-1 [ 4.611414] [drm] HPD3 [ 4.611415] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 4.611415] [drm] Encoders: [ 4.611416] [drm] DFP3: INTERNAL_UNIPHY1 [ 4.611416] [drm] Connector 3: [ 4.611416] [drm] DVI-D-1 [ 4.611417] [drm] HPD1 [ 4.611418] [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c [ 4.611418] [drm] Encoders: [ 4.611418] [drm] DFP4: INTERNAL_UNIPHY1 [ 4.611419] [drm] Connector 4: [ 4.611419] [drm] DVI-I-1 [ 4.611419] [drm] HPD6 [ 4.611420] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 4.611420] [drm] Encoders: [ 4.611421] [drm] DFP5: INTERNAL_UNIPHY [ 4.611421] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 6.346151] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large: [ 6.346157] clocksource: 'hpet' wd_now: 56eb292 wd_last: 4b1577d mask: ffffffff [ 6.346158] clocksource: 'tsc' cs_now: 15f3d97355 cs_last: 155b9e363b mask: ffffffffffffffff [ 7.068425] clocksource: Switched to clocksource hpet [ 7.501764] scsi 14:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 8.079552] hrtimer: interrupt took 577789495 ns [ 8.368467] usb 3-5: New USB device found, idVendor=046d, idProduct=082d [ 8.368468] usb 3-5: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 8.368469] usb 3-5: Product: HD Pro Webcam C920 [ 8.368470] usb 3-5: SerialNumber: ... [ 10.462984] CE: hpet increased min_delta_ns to 20115 nsec [ 10.680575] scsi 14:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 10.681519] sd 14:0:0:0: [sdc] Attached SCSI removable disk [ 10.682646] scsi 14:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 12.654478] random: crng init done [ 12.654480] random: 7 urandom warning(s) missed due to ratelimiting [ 12.655619] scsi 14:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS [ 12.680860] sd 14:0:0:1: [sdd] Attached SCSI removable disk [ 12.682873] sd 14:0:0:2: [sde] Attached SCSI removable disk [ 12.684240] sd 14:0:0:3: [sdf] Attached SCSI removable disk [ 12.736583] [drm] fb mappable at 0xD0363000 [ 12.736584] [drm] vram apper at 0xD0000000 [ 12.736585] [drm] size 8294400 [ 12.736585] [drm] fb depth is 24 [ 12.736586] [drm] pitch is 7680 [ 12.736664] fbcon: radeondrmfb (fb0) is primary device [ 12.759830] Console: switching to colour frame buffer device 240x67 [ 12.765271] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 12.769011] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0 [ 12.943202] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 13.345220] systemd-journald[178]: Received SIGTERM from PID 1 (systemd). [ 13.398813] systemd: 48 output lines suppressed due to ratelimiting [ 13.530662] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 13.566612] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 13.577019] systemd[1]: systemd 243 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 13.577101] systemd[1]: Detected architecture x86-64. [ 13.577654] systemd[1]: Set hostname to ... [ 13.797291] systemd[1]: Configuration file /lib/systemd/system/esets.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 13.797466] systemd[1]: /lib/systemd/system/esets.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/esets_daemon.pid \xe2\x86\x92 /run/esets_daemon.pid; please update the unit file accordingly. [ 13.828611] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm \xe2\x86\x92 /run/pcscd/pcscd.comm; please update the unit file accordingly. [ 13.829210] systemd[1]: /lib/systemd/system/cups.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/cups/cups.sock \xe2\x86\x92 /run/cups/cups.sock; please update the unit file accordingly. [ 13.829744] systemd[1]: /lib/systemd/system/acpid.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/acpid.socket \xe2\x86\x92 /run/acpid.socket; please update the unit file accordingly. [ 13.918456] systemd[1]: initrd-switch-root.service: Succeeded. [ 13.918583] systemd[1]: Stopped Switch Root. [ 13.942731] Adding 4094972k swap on /dev/sdb5. Priority:-1 extents:1 across:4094972k SSFS [ 13.983272] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 14.406639] systemd-journald[626]: Received client request to flush runtime journal. [ 15.575717] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160831/utaddress-247) [ 15.575723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 15.578299] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 15.578347] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x41 [ 15.578388] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 15.578406] sp5100_tco: Last reboot was not triggered by watchdog. [ 15.578450] sp5100_tco: initialized (0xffffc90000df5b00). heartbeat=60 sec (nowayout=1) [ 15.579796] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.586110] Uniform Multi-Platform E-IDE driver [ 15.633336] acpi_cpufreq: overriding BIOS provided _PSD data [ 15.649432] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 15.664050] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5 [ 15.668097] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 15.668100] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 15.668101] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 15.668102] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 15.668103] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 15.668104] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 15.668105] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 15.668106] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 15.668107] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 15.668108] snd_hda_codec_realtek hdaudioC0D0: dig-in=0x1f [ 15.687347] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 15.687396] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 15.687439] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 15.687481] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 15.687522] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input10 [ 15.687562] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 15.687603] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 15.687644] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 15.916069] parport_pc 00:04: reported by Plug and Play ACPI [ 15.916137] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.964015] media: Linux media interface: v0.10 [ 17.016015] Linux video capture interface: v2.00 [ 17.145466] usbcore: registered new interface driver snd-usb-audio [ 17.145604] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d) [ 17.146267] uvcvideo 3-5:1.0: Entity type for entity Processing 3 was not initialized! [ 17.146270] uvcvideo 3-5:1.0: Entity type for entity Extension 6 was not initialized! [ 17.146271] uvcvideo 3-5:1.0: Entity type for entity Extension 12 was not initialized! [ 17.146272] uvcvideo 3-5:1.0: Entity type for entity Camera 1 was not initialized! [ 17.146273] uvcvideo 3-5:1.0: Entity type for entity Extension 8 was not initialized! [ 17.146274] uvcvideo 3-5:1.0: Entity type for entity Extension 9 was not initialized! [ 17.146275] uvcvideo 3-5:1.0: Entity type for entity Extension 10 was not initialized! [ 17.146277] uvcvideo 3-5:1.0: Entity type for entity Extension 11 was not initialized! [ 17.146332] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:12.2/usb3/3-5/3-5:1.0/input/input14 [ 17.146374] usbcore: registered new interface driver uvcvideo [ 17.146374] USB Video Class driver (1.1.1) [ 17.382366] kvm: Nested Virtualization enabled [ 17.382371] kvm: Nested Paging enabled [ 17.385700] EDAC MC: Ver: 3.0.0 [ 17.393282] EDAC amd64: DRAM ECC disabled. [ 17.393288] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 17.404429] EDAC amd64: DRAM ECC disabled. [ 17.404433] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 17.416387] EDAC amd64: DRAM ECC disabled. [ 17.416391] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 18.791846] ppdev: user-space parallel port driver [ 19.348457] audit_printk_skb: 120 callbacks suppressed [ 19.478124] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 19.636901] it87: Found IT8720F chip at 0x228, revision 8 [ 19.636925] it87: Routing internal VCCH to in7 [ 19.636929] it87: Beeping is supported [ 20.516146] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready [ 20.617413] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 20.628017] r8169 0000:06:00.0 enp6s0: link down [ 20.628856] r8169 0000:06:00.0 enp6s0: link down [ 20.629055] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready [ 20.651157] Netfilter messages via NETLINK v0.30. [ 20.655824] ctnetlink v0.93: registering with nfnetlink. [ 21.133978] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 21.310205] nf_tables: (c) 4BE4-5A40 Patrick McHardy <XXX@XXX> [ 22.192835] r8169 0000:06:00.0 enp6s0: link up [ 22.192853] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready [ 22.286101] NET: Registered protocol family 17 [ 24.943816] audit_printk_skb: 525 callbacks suppressed [ 31.253561] Bluetooth: Core ver 2.22 [ 31.253575] NET: Registered protocol family 31 [ 31.253576] Bluetooth: HCI device and connection manager initialized [ 31.253579] Bluetooth: HCI socket layer initialized [ 31.253581] Bluetooth: L2CAP socket layer initialized [ 31.253586] Bluetooth: SCO socket layer initialized [ 31.306560] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 31.306562] Bluetooth: BNEP filters: protocol multicast [ 31.306566] Bluetooth: BNEP socket layer initialized [ 36.295760] usb 3-5: reset high-speed USB device number 3 using ehci-pci [ 39.540117] fuse init (API version 7.26) [ 247.272426] systemd: 76 output lines suppressed due to ratelimiting [ 247.278609] systemd[1]: systemd 243 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 247.278711] systemd[1]: Detected architecture x86-64. [ 247.407021] systemd[1]: Configuration file /lib/systemd/system/esets.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 1459.343492] ide-cd driver 5.00 [ 1459.358299] ide-gd driver 1.18 [ 1459.378775] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 1459.659236] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1459.659346] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1459.659443] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 1459.659544] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 1459.659656] sd 14:0:0:0: Attached scsi generic sg4 type 0 [ 1459.659751] sd 14:0:0:1: Attached scsi generic sg5 type 0 [ 1459.663469] sd 14:0:0:2: Attached scsi generic sg6 type 0 [ 1459.663561] sd 14:0:0:3: Attached scsi generic sg7 type 0 [ 1461.640672] r8169 0000:06:00.0: invalid short VPD tag 00 at offset 1