Probe #b2861f7a73 of Desktop Computer
Log: dmesg
[ 0.000000] microcode: microcode updated early to revision 0x11, date = 2018-05-08
[ 0.000000] Linux version 5.8.0-40-generic (XXX@XXX) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #45~20.04.1-Ubuntu SMP Fri Jan 15 11:35:04 UTC 2021 (Ubuntu 5.8.0-40.45~20.04.1-generic 5.8.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-40-generic root=UUID=HASH_8C2-2C5C-E40C-C607-DB9D06EAAA4B ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb77ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb780000-0x00000000bb78dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bb78e000-0x00000000bb7cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb7d0000-0x00000000bb7dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bb7ed000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 03/02/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2933.439 MHz processor
[ 0.001467] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001469] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001475] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.001479] MTRR default type: uncachable
[ 0.001480] MTRR fixed ranges enabled:
[ 0.001481] 00000-9FFFF write-back
[ 0.001482] A0000-BFFFF uncachable
[ 0.001483] C0000-CFFFF write-protect
[ 0.001484] D0000-DFFFF uncachable
[ 0.001485] E0000-E3FFF write-protect
[ 0.001485] E4000-E7FFF write-through
[ 0.001486] E8000-EBFFF write-protect
[ 0.001487] EC000-EFFFF write-through
[ 0.001488] F0000-FFFFF write-protect
[ 0.001489] MTRR variable ranges enabled:
[ 0.001490] 0 base 13C000000 mask FFC000000 uncachable
[ 0.001491] 1 base 000000000 mask F00000000 write-back
[ 0.001492] 2 base 100000000 mask FC0000000 write-back
[ 0.001493] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.001494] 4 base 0BC000000 mask FFC000000 uncachable
[ 0.001495] 5 disabled
[ 0.001495] 6 disabled
[ 0.001496] 7 disabled
[ 0.002250] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002427] total RAM covered: 3968M
[ 0.002864] Found optimal setting for mtrr clean up
[ 0.002866] gran_size: 64K chunk_size: 128M num_reg: 5 lose cover RAM: 0G
[ 0.003453] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[ 0.003459] last_pfn = 0xbb780 max_arch_pfn = 0x400000000
[ 0.012246] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[ 0.018636] check: Scanning 1 areas for low memory corruption
[ 0.018852] RAMDISK: [mem 0x31ca7000-0x34e4afff]
[ 0.018863] ACPI: Early table checksum verification disabled
[ 0.018868] ACPI: RSDP 0x00000000000F9790 000014 (v00 ACPIAM)
[ 0.018872] ACPI: RSDT 0x00000000BB780000 000038 (v01 030210 RSDT1145 20100302 MSFT 00000097)
[ 0.018879] ACPI: FACP 0x00000000BB780200 000084 (v01 030210 FACP1145 20100302 MSFT 00000097)
[ 0.018886] ACPI: DSDT 0x00000000BB780460 005E72 (v01 A130PA A130PA17 00000017 INTL 20051117)
[ 0.018890] ACPI: FACS 0x00000000BB78E000 000040
[ 0.018893] ACPI: APIC 0x00000000BB780390 00008C (v01 030210 APIC1145 20100302 MSFT 00000097)
[ 0.018897] ACPI: MCFG 0x00000000BB780420 00003C (v01 030210 OEMMCFG 20100302 MSFT 00000097)
[ 0.018900] ACPI: OEMB 0x00000000BB78E040 000072 (v01 030210 OEMB1145 20100302 MSFT 00000097)
[ 0.018904] ACPI: GSCI 0x00000000BB78E0C0 002024 (v01 030210 GMCHSCI 20100302 MSFT 00000097)
[ 0.018916] ACPI: Local APIC address 0xfee00000
[ 0.019029] No NUMA configuration found
[ 0.019030] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.019041] NODE_DATA(0) allocated [mem 0x137fd3000-0x137ffcfff]
[ 0.019477] Zone ranges:
[ 0.019478] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.019479] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.019480] Normal [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.019481] Device empty
[ 0.019482] Movable zone start for each node
[ 0.019485] Early memory node ranges
[ 0.019486] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.019487] node 0: [mem 0x0000000000100000-0x00000000bb77ffff]
[ 0.019488] node 0: [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.019844] Zeroed struct page in unavailable ranges: 18658 pages
[ 0.019845] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[ 0.019846] On node 0 totalpages: 997150
[ 0.019848] DMA zone: 64 pages used for memmap
[ 0.019848] DMA zone: 21 pages reserved
[ 0.019849] DMA zone: 3998 pages, LIFO batch:0
[ 0.019888] DMA32 zone: 11934 pages used for memmap
[ 0.019889] DMA32 zone: 763776 pages, LIFO batch:63
[ 0.029160] Normal zone: 3584 pages used for memmap
[ 0.029162] Normal zone: 229376 pages, LIFO batch:63
[ 0.031939] Reserving Intel graphics memory at [mem 0xbe000000-0xbfffffff]
[ 0.032086] ACPI: PM-Timer IO Port: 0x808
[ 0.032089] ACPI: Local APIC address 0xfee00000
[ 0.032109] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.032112] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.032114] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.032116] ACPI: IRQ0 used by override.
[ 0.032117] ACPI: IRQ9 used by override.
[ 0.032119] Using ACPI (MADT) for SMP configuration information
[ 0.032122] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.032142] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.032144] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.032145] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.032146] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.032147] PM: hibernation: Registered nosave memory: [mem 0xbb780000-0xbb78dfff]
[ 0.032148] PM: hibernation: Registered nosave memory: [mem 0xbb78e000-0xbb7cffff]
[ 0.032149] PM: hibernation: Registered nosave memory: [mem 0xbb7d0000-0xbb7dffff]
[ 0.032149] PM: hibernation: Registered nosave memory: [mem 0xbb7e0000-0xbb7ecfff]
[ 0.032150] PM: hibernation: Registered nosave memory: [mem 0xbb7ed000-0xbfffffff]
[ 0.032151] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xfed1ffff]
[ 0.032151] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed3ffff]
[ 0.032152] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfedfffff]
[ 0.032152] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.032153] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.032154] PM: hibernation: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.032156] [mem 0xc0000000-0xfed1ffff] available for PCI devices
[ 0.032157] Booting paravirtualized kernel on bare hardware
[ 0.032160] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.032170] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.032571] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
[ 0.032578] pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
[ 0.032579] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.032615] Built 1 zonelists, mobility grouping on. Total pages: 981547
[ 0.032615] Policy zone: Normal
[ 0.032617] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.8.0-40-generic root=UUID=HASH_8C2-2C5C-E40C-C607-DB9D06EAAA4B ro quiet splash vt.handoff=7
[ 0.033258] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.033543] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.033635] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.057930] Memory: 3767292K/3988600K available (14339K kernel code, 2563K rwdata, 5356K rodata, 2636K init, 4900K bss, 221308K reserved, 0K cma-reserved)
[ 0.057941] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[ 0.058129] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.058146] Kernel/User page tables isolation: enabled
[ 0.058167] ftrace: allocating 46188 entries in 181 pages
[ 0.079191] ftrace: allocated 181 pages with 5 groups
[ 0.079369] rcu: Hierarchical RCU implementation.
[ 0.079371] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.079372] Trampoline variant of Tasks RCU enabled.
[ 0.079372] Rude variant of Tasks RCU enabled.
[ 0.079373] Tracing variant of Tasks RCU enabled.
[ 0.079374] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.079374] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.084324] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.084735] vt handoff: transparent VT on vt#7
[ 0.084747] Console: colour dummy device 80x25
[ 0.084753] printk: console [tty0] enabled
[ 0.084776] ACPI: Core revision 20200528
[ 0.084872] APIC: Switch to symmetric I/O mode setup
[ 0.085399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.104872] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2a48a81159b, max_idle_ns: 440795340994 ns
[ 0.104879] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.87 BogoMIPS (lpj=11733756)
[ 0.104881] pid_max: default: 32768 minimum: 301
[ 0.104919] LSM: Security Framework initializing
[ 0.104931] Yama: becoming mindful.
[ 0.104962] AppArmor: AppArmor initialized
[ 0.105015] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.105026] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.105369] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.105379] process: using mwait in idle threads
[ 0.105382] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.105383] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.105386] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.105388] Spectre V2 : Mitigation: Full generic retpoline
[ 0.105388] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.105389] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.105391] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.105391] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.105393] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.105396] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.105611] Freeing SMP alternatives memory: 40K
[ 0.215984] smpboot: CPU0: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz (family: 0x6, model: 0x25, stepping: 0x2)
[ 0.216134] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[ 0.216141] core: CPUID marked event: 'bus cycles' unavailable
[ 0.216142] ... version: 3
[ 0.216143] ... bit width: 48
[ 0.216143] ... generic registers: 4
[ 0.216144] ... value mask: 0000ffffffffffff
[ 0.216145] ... max period: 000000007fffffff
[ 0.216145] ... fixed-purpose events: 3
[ 0.216146] ... event mask: 000000070000000f
[ 0.216193] rcu: Hierarchical SRCU implementation.
[ 0.216875] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.216875] smp: Bringing up secondary CPUs ...
[ 0.216875] x86: Booting SMP configuration:
[ 0.216875] .... node #0, CPUs: #1 #2
[ 0.220898] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.221052] #3
[ 0.223276] smp: Brought up 1 node, 4 CPUs
[ 0.223276] smpboot: Max logical packages: 2
[ 0.223276] smpboot: Total of 4 processors activated (23467.51 BogoMIPS)
[ 0.225181] devtmpfs: initialized
[ 0.225181] x86/mm: Memory block size: 128MB
[ 0.225184] PM: Registering ACPI NVS region [mem 0xbb78e000-0xbb7cffff] (270336 bytes)
[ 0.225184] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.225184] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.225184] pinctrl core: initialized pinctrl subsystem
[ 0.225184] PM: RTC time: 14:01:31, date: 2021-01-28
[ 0.225184] thermal_sys: Registered thermal governor 'fair_share'
[ 0.225184] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.225184] thermal_sys: Registered thermal governor 'step_wise'
[ 0.225184] thermal_sys: Registered thermal governor 'user_space'
[ 0.225184] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.225194] NET: Registered protocol family 16
[ 0.225335] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.225392] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.225452] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.225479] EISA bus registered
[ 0.225479] cpuidle: using governor ladder
[ 0.225479] cpuidle: using governor menu
[ 0.225479] ACPI: bus type PCI registered
[ 0.225479] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.225479] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.225479] PCI: not using MMCONFIG
[ 0.225479] PCI: Using configuration type 1 for base access
[ 0.228924] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.228995] ACPI: Added _OSI(Module Device)
[ 0.228996] ACPI: Added _OSI(Processor Device)
[ 0.228997] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.228998] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.228999] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.229000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.229001] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.236259] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.237435] ACPI: Interpreter enabled
[ 0.237454] ACPI: (supports S0 S3 S4 S5)
[ 0.237455] ACPI: Using IOAPIC for interrupt routing
[ 0.237492] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.238837] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.238854] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.239067] ACPI: Enabled 14 GPEs in block 00 to 3F
[ 0.247867] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.247874] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.248160] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.248432] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.248791] PCI host bridge to bus 0000:00
[ 0.248794] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.248795] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.248796] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.248797] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.248798] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xdfffffff window]
[ 0.248799] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ 0.248800] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.248810] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[ 0.248833] pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.248932] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000
[ 0.248942] pci 0000:00:02.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
[ 0.248947] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.248950] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
[ 0.249090] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.249119] pci 0000:00:16.0: reg 0x10: [mem 0xfbdfa000-0xfbdfa00f 64bit]
[ 0.249207] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.249304] pci 0000:00:19.0: [8086:10ef] type 00 class 0x020000
[ 0.249320] pci 0000:00:19.0: reg 0x10: [mem 0xfbdc0000-0xfbddffff]
[ 0.249327] pci 0000:00:19.0: reg 0x14: [mem 0xfbdf8000-0xfbdf8fff]
[ 0.249333] pci 0000:00:19.0: reg 0x18: [io 0xd880-0xd89f]
[ 0.249383] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.249484] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
[ 0.249521] pci 0000:00:1a.0: reg 0x20: [io 0xd800-0xd81f]
[ 0.249648] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
[ 0.249686] pci 0000:00:1a.1: reg 0x20: [io 0xd480-0xd49f]
[ 0.249812] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
[ 0.249849] pci 0000:00:1a.2: reg 0x20: [io 0xd400-0xd41f]
[ 0.249981] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
[ 0.250000] pci 0000:00:1a.7: reg 0x10: [mem 0xfbdf6000-0xfbdf63ff]
[ 0.250072] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.250177] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.250195] pci 0000:00:1b.0: reg 0x10: [mem 0xfbdf0000-0xfbdf3fff 64bit]
[ 0.250259] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.250352] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.250467] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.250581] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.250695] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.250806] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
[ 0.250844] pci 0000:00:1d.0: reg 0x20: [io 0xd080-0xd09f]
[ 0.250970] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
[ 0.251008] pci 0000:00:1d.1: reg 0x20: [io 0xd000-0xd01f]
[ 0.251137] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
[ 0.251175] pci 0000:00:1d.2: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.251306] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
[ 0.251325] pci 0000:00:1d.7: reg 0x10: [mem 0xfbdf4000-0xfbdf43ff]
[ 0.251396] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.251499] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.251641] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[ 0.251831] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[ 0.251845] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
[ 0.251851] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
[ 0.251857] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
[ 0.251863] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
[ 0.251869] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc08f]
[ 0.251875] pci 0000:00:1f.2: reg 0x24: [io 0xc000-0xc00f]
[ 0.252000] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.252016] pci 0000:00:1f.3: reg 0x10: [mem 0xfbdee000-0xfbdee0ff 64bit]
[ 0.252032] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.252127] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[ 0.252140] pci 0000:00:1f.5: reg 0x10: [io 0xb880-0xb887]
[ 0.252146] pci 0000:00:1f.5: reg 0x14: [io 0xb800-0xb803]
[ 0.252152] pci 0000:00:1f.5: reg 0x18: [io 0xb480-0xb487]
[ 0.252158] pci 0000:00:1f.5: reg 0x1c: [io 0xb400-0xb403]
[ 0.252164] pci 0000:00:1f.5: reg 0x20: [io 0xb080-0xb08f]
[ 0.252170] pci 0000:00:1f.5: reg 0x24: [io 0xb000-0xb00f]
[ 0.252330] pci 0000:01:00.0: [168c:002a] type 00 class 0x028000
[ 0.252361] pci 0000:01:00.0: reg 0x10: [mem 0xfbef0000-0xfbefffff 64bit]
[ 0.252480] pci 0000:01:00.0: supports D1
[ 0.252481] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.252565] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.252573] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.252578] pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.252626] pci 0000:02:00.0: [197b:2360] type 00 class 0x010601
[ 0.252664] pci 0000:02:00.0: reg 0x10: [io 0xec00-0xec07]
[ 0.252676] pci 0000:02:00.0: reg 0x14: [io 0xe880-0xe883]
[ 0.252688] pci 0000:02:00.0: reg 0x18: [io 0xe800-0xe807]
[ 0.252699] pci 0000:02:00.0: reg 0x1c: [io 0xe480-0xe483]
[ 0.252711] pci 0000:02:00.0: reg 0x20: [io 0xe400-0xe40f]
[ 0.252723] pci 0000:02:00.0: reg 0x24: [mem 0xfbffe000-0xfbffffff]
[ 0.252792] pci 0000:02:00.0: PME# supported from D3hot
[ 0.252857] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.252866] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.252868] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.252871] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.252890] pci_bus 0000:03: extended config space not accessible
[ 0.252935] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.252942] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.252943] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.252944] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.252947] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.252949] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xdfffffff window] (subtractive decode)
[ 0.252950] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ 0.253645] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.253719] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.253790] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.253863] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.253935] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.254008] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.254080] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.254152] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.254291] iommu: Default domain type: Translated
[ 0.254291] SCSI subsystem initialized
[ 0.254291] libata version 3.00 loaded.
[ 0.254291] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.254291] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.254291] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.254291] vgaarb: loaded
[ 0.254291] ACPI: bus type USB registered
[ 0.254291] usbcore: registered new interface driver usbfs
[ 0.254291] usbcore: registered new interface driver hub
[ 0.254291] usbcore: registered new device driver usb
[ 0.254291] pps_core: LinuxPPS API ver. 1 registered
[ 0.254291] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX>
[ 0.254291] PTP clock support registered
[ 0.254291] EDAC MC: Ver: 3.0.0
[ 0.254291] NetLabel: Initializing
[ 0.254291] NetLabel: domain hash size = 128
[ 0.254291] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.254291] NetLabel: unlabeled traffic allowed by default
[ 0.254291] PCI: Using ACPI for IRQ routing
[ 0.256877] PCI: Discovered peer bus ff
[ 0.256877] PCI: root bus ff: using default resources
[ 0.256877] PCI: Probing PCI hardware (bus ff)
[ 0.256877] PCI host bridge to bus 0000:ff
[ 0.256877] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.256877] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.256877] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.256877] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.256877] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
[ 0.256877] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.256877] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.256877] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.256877] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.256877] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.256877] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.256877] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[ 0.256877] PCI: pci_cache_line_size set to 64 bytes
[ 0.256877] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.256877] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.256877] e820: reserve RAM buffer [mem 0xbb780000-0xbbffffff]
[ 0.260888] clocksource: Switched to clocksource tsc-early
[ 0.277797] VFS: Disk quotas dquot_6.6.0
[ 0.277819] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.277947] AppArmor: AppArmor Filesystem Enabled
[ 0.277981] pnp: PnP ACPI init
[ 0.278092] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 0.278094] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 0.278096] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[ 0.278099] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.278106] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.278196] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.278475] pnp 00:02: [dma 0 disabled]
[ 0.278528] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.278674] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.278679] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278888] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.278890] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.278891] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.278893] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.278894] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.278895] system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.278900] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279026] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.279030] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279190] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.279191] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.279196] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279273] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.279277] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279542] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.279544] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.279545] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.279547] system 00:08: [mem 0x00100000-0xbbffffff] could not be reserved
[ 0.279548] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.279552] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.279722] pnp: PnP ACPI: found 9 devices
[ 0.285863] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.285928] NET: Registered protocol family 2
[ 0.286150] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.286202] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.286344] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.286470] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.286581] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.286615] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.286679] NET: Registered protocol family 1
[ 0.286683] NET: Registered protocol family 44
[ 0.286693] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.286696] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.286698] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.286710] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286713] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.286715] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.286718] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.286721] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.286724] pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.286727] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286731] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.286733] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.286736] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.286738] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.286742] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.286751] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.286752] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.286753] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.286754] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.286755] pci_bus 0000:00: resource 8 [mem 0xbc000000-0xdfffffff window]
[ 0.286756] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.286758] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.286759] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.286760] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286761] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.286762] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.286763] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.286764] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.286766] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.286767] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.286768] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.286769] pci_bus 0000:03: resource 8 [mem 0xbc000000-0xdfffffff window]
[ 0.286770] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.286841] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.286842] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.286859] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.286866] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.288190] PCI: CLS 32 bytes, default 64
[ 0.288240] Trying to unpack rootfs image as initramfs...
[ 0.449682] Freeing initrd memory: 50832K
[ 0.449749] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.449751] software IO TLB: mapped [mem 0xb7780000-0xbb780000] (64MB)
[ 0.449935] check: Scanning for low memory corruption every 60 seconds
[ 0.450446] Initialise system trusted keyrings
[ 0.450457] Key type blacklist registered
[ 0.450492] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.451896] zbud: loaded
[ 0.452174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.452334] fuse: init (API version 7.31)
[ 0.452483] integrity: Platform Keyring initialized
[ 0.462121] Key type asymmetric registered
[ 0.462123] Asymmetric key parser 'x509' registered
[ 0.462132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.462177] io scheduler mq-deadline registered
[ 0.462297] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.462508] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 0.462534] pcieport 0000:00:1c.0: pciehp: Slot #128 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.462780] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[ 0.462805] pcieport 0000:00:1c.1: pciehp: Slot #129 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.462947] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.463001] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.463002] vesafb: scrolling: redraw
[ 0.463003] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.463024] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 5120k, total 5120k
[ 0.463066] fbcon: Deferring console take-over
[ 0.463067] fb0: VESA VGA frame buffer device
[ 0.463081] intel_idle: MWAIT substates: 0x1120
[ 0.463081] intel_idle: v0.5.1 model 0x25
[ 0.463242] intel_idle: Local APIC timer is reliable in all C-states
[ 0.463356] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.463380] ACPI: Power Button [PWRB]
[ 0.463413] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.463449] ACPI: Power Button [PWRF]
[ 0.463857] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.484288] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.487793] hpet_acpi_add: no address or irqs in _CRS
[ 0.487830] Linux agpgart interface v0.103
[ 0.491017] loop: module loaded
[ 0.491294] ata_piix 0000:00:1f.2: version 2.13
[ 0.491432] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.492804] scsi host0: ata_piix
[ 0.492940] scsi host1: ata_piix
[ 0.492978] ata1: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 19
[ 0.492981] ata2: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 19
[ 0.493092] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.494144] scsi host2: ata_piix
[ 0.494225] scsi host3: ata_piix
[ 0.494260] ata3: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 19
[ 0.494262] ata4: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 19
[ 0.494441] libphy: Fixed MDIO Bus: probed
[ 0.494442] tun: Universal TUN/TAP device driver, 1.6
[ 0.494490] PPP generic driver version 2.4.2
[ 0.494540] VFIO - User Level meta-driver version: 0.3
[ 0.494595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.494599] ehci-pci: EHCI PCI platform driver
[ 0.494718] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.494725] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.494736] ehci-pci 0000:00:1a.7: debug port 2
[ 0.498637] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.498652] ehci-pci 0000:00:1a.7: irq 16, io mem 0xfbdf6000
[ 0.513635] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.513774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.513776] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.513777] usb usb1: Product: EHCI Host Controller
[ 0.513778] usb usb1: Manufacturer: Linux 5.8.0-40-generic ehci_hcd
[ 0.513779] usb usb1: SerialNumber: ...
[ 0.514072] hub 1-0:1.0: USB hub found
[ 0.514089] hub 1-0:1.0: 6 ports detected
[ 0.514427] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.514432] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.514440] ehci-pci 0000:00:1d.7: debug port 2
[ 0.518353] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.518362] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbdf4000
[ 0.533634] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.533709] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 0.533712] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.533714] usb usb2: Product: EHCI Host Controller
[ 0.533716] usb usb2: Manufacturer: Linux 5.8.0-40-generic ehci_hcd
[ 0.533718] usb usb2: SerialNumber: ...
[ 0.534020] hub 2-0:1.0: USB hub found
[ 0.534036] hub 2-0:1.0: 8 ports detected
[ 0.534316] ehci-platform: EHCI generic platform driver
[ 0.534325] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.534328] ohci-pci: OHCI PCI platform driver
[ 0.534337] ohci-platform: OHCI generic platform driver
[ 0.534342] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.534458] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.534462] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.534467] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.534490] uhci_hcd 0000:00:1a.0: irq 21, io base 0x0000d800
[ 0.534533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 0.534534] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.534536] usb usb3: Product: UHCI Host Controller
[ 0.534537] usb usb3: Manufacturer: Linux 5.8.0-40-generic uhci_hcd
[ 0.534538] usb usb3: SerialNumber: ...
[ 0.534787] hub 3-0:1.0: USB hub found
[ 0.534803] hub 3-0:1.0: 2 ports detected
[ 0.535022] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.535027] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.535031] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.535052] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000d480
[ 0.535100] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 0.535101] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.535103] usb usb4: Product: UHCI Host Controller
[ 0.535104] usb usb4: Manufacturer: Linux 5.8.0-40-generic uhci_hcd
[ 0.535105] usb usb4: SerialNumber: ...
[ 0.535370] hub 4-0:1.0: USB hub found
[ 0.535385] hub 4-0:1.0: 2 ports detected
[ 0.535587] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.535591] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.535596] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.535612] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d400
[ 0.535655] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 0.535656] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.535657] usb usb5: Product: UHCI Host Controller
[ 0.535659] usb usb5: Manufacturer: Linux 5.8.0-40-generic uhci_hcd
[ 0.535660] usb usb5: SerialNumber: ...
[ 0.535978] hub 5-0:1.0: USB hub found
[ 0.535996] hub 5-0:1.0: 2 ports detected
[ 0.536186] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.536191] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.536196] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.536212] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000d080
[ 0.536253] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 0.536255] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.536256] usb usb6: Product: UHCI Host Controller
[ 0.536257] usb usb6: Manufacturer: Linux 5.8.0-40-generic uhci_hcd
[ 0.536258] usb usb6: SerialNumber: ...
[ 0.536577] hub 6-0:1.0: USB hub found
[ 0.536596] hub 6-0:1.0: 2 ports detected
[ 0.536801] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.536805] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.536810] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.536826] uhci_hcd 0000:00:1d.1: irq 16, io base 0x0000d000
[ 0.536867] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 0.536869] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.536870] usb usb7: Product: UHCI Host Controller
[ 0.536871] usb usb7: Manufacturer: Linux 5.8.0-40-generic uhci_hcd
[ 0.536872] usb usb7: SerialNumber: ...
[ 0.537176] hub 7-0:1.0: USB hub found
[ 0.537194] hub 7-0:1.0: 2 ports detected
[ 0.537384] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.537389] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.537394] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.537410] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cc00
[ 0.537462] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[ 0.537463] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 0.537465] usb usb8: Product: UHCI Host Controller
[ 0.537466] usb usb8: Manufacturer: Linux 5.8.0-40-generic uhci_hcd
[ 0.537467] usb usb8: SerialNumber: ...
[ 0.537730] hub 8-0:1.0: USB hub found
[ 0.537748] hub 8-0:1.0: 2 ports detected
[ 0.537875] i8042: PNP: No PS/2 controller found.
[ 0.537876] i8042: Probing ports directly.
[ 0.540940] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.540944] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.541299] mousedev: PS/2 mouse device common for all mice
[ 0.541587] rtc_cmos 00:01: RTC can wake from S4
[ 0.541676] rtc rtc0: invalid alarm value: 2021-01-28T15:59:63
[ 0.541949] rtc_cmos 00:01: registered as rtc0
[ 0.542041] rtc_cmos 00:01: setting system clock to 2021-01-28T14:01:31 UTC (1611842491)
[ 0.542066] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 0.542073] i2c /dev entries driver
[ 0.542116] device-mapper: uevent: version 1.0.3
[ 0.542280] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: XXX@XXX
[ 0.542331] platform eisa.0: Probing EISA bus 0
[ 0.542334] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.542337] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.542340] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.542343] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.542346] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.542348] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.542351] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.542353] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.542356] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.542359] platform eisa.0: EISA: Detected 0 cards
[ 0.542363] intel_pstate: CPU model not supported
[ 0.542500] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.542588] drop_monitor: Initializing network drop monitor service
[ 0.542762] NET: Registered protocol family 10
[ 0.549165] Segment Routing with IPv6
[ 0.549191] NET: Registered protocol family 17
[ 0.549239] Key type dns_resolver registered
[ 0.549610] microcode: sig=0x20652, pf=0x2, revision=0x11
[ 0.549651] microcode: Microcode Update Driver: v2.2.
[ 0.549655] IPI shorthand broadcast: enabled
[ 0.549662] sched_clock: Marking stable (549452823, 193342)->(553487737, -3841572)
[ 0.549739] registered taskstats version 1
[ 0.549751] Loading compiled-in X.509 certificates
[ 0.550636] Loaded X.509 cert 'Build time autogenerated kernel key: 6ad7eb942a0f093219d6f71e8640c70ffef8028c'
[ 0.550672] zswap: loaded using pool lzo/zbud
[ 0.550788] Key type ._fscrypt registered
[ 0.550789] Key type .fscrypt registered
[ 0.550789] Key type fscrypt-provisioning registered
[ 0.553716] Key type encrypted registered
[ 0.553720] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.553728] ima: No TPM chip found, activating TPM-bypass!
[ 0.553733] ima: Allocated hash algorithm: sha1
[ 0.553742] ima: No architecture policies found
[ 0.553752] evm: Initialising EVM extended attributes:
[ 0.553753] evm: security.selinux
[ 0.553753] evm: security.SMACK64
[ 0.553754] evm: security.SMACK64EXEC
[ 0.553754] evm: security.SMACK64TRANSMUTE
[ 0.553755] evm: security.SMACK64MMAP
[ 0.553755] evm: security.apparmor
[ 0.553755] evm: security.ima
[ 0.553756] evm: security.capability
[ 0.553757] evm: HMAC attrs: 0x1
[ 0.554180] PM: Magic number: 5:519:31
[ 0.554453] RAS: Correctable Errors collector initialized.
[ 0.852137] usb 1-4: new high-speed USB device number 2 using ehci-pci
[ 0.968184] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.970704] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.992435] ata4.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 0.992438] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.995057] ata3.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 0.995060] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.016445] ata4.00: configured for UDMA/133
[ 1.019003] ata3.00: configured for UDMA/133
[ 1.026037] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.60
[ 1.026040] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=...
[ 1.026042] usb 1-4: Product: USB2.0 Hub
[ 1.026692] hub 1-4:1.0: USB hub found
[ 1.027168] hub 1-4:1.0: 4 ports detected
[ 1.072146] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 1.247212] usb 6-2: New USB device found, idVendor=045e, idProduct=0800, bcdDevice= 9.34
[ 1.247216] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 1.247218] usb 6-2: Product: Microsoft\xc2\xae Nano Transceiver v2.0
[ 1.247220] usb 6-2: Manufacturer: Microsoft
[ 1.257005] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.257018] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.261008] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.261021] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.283553] ata1.00: ATA-9: Samsung SSD 840 Series, DXT09B0Q, max UDMA/133
[ 1.283556] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.283751] ata1.01: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 1.283754] ata1.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.286323] ata1.00: configured for UDMA/133
[ 1.297266] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 1.297269] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.297475] ata2.01: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 1.297478] ata2.01: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.305250] ata1.01: configured for UDMA/133
[ 1.305472] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 9B0Q PQ: 0 ANSI: 5
[ 1.305611] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.305701] ata1.00: Enabling discard_zeroes_data
[ 1.305837] scsi 0:0:1:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5
[ 1.306035] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.306053] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.306061] sd 0:0:0:0: [sda] Write Protect is off
[ 1.306063] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.306118] sd 0:0:1:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.306139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.306147] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.306149] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.306183] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.306280] ata1.00: Enabling discard_zeroes_data
[ 1.307050] sda: sda1 sda2 < sda5 >
[ 1.314792] ata1.00: Enabling discard_zeroes_data
[ 1.315407] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.315555] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.317248] ata2.00: configured for UDMA/133
[ 1.337237] ata2.01: configured for UDMA/133
[ 1.337375] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5
[ 1.337505] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.337716] sd 1:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.337748] scsi 1:0:1:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5
[ 1.337770] sd 1:0:0:0: [sdc] Write Protect is off
[ 1.337772] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.337907] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.337993] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 1.338016] sd 1:0:1:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.338026] sd 1:0:1:0: [sdd] Write Protect is off
[ 1.338028] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.338051] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.338116] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5
[ 1.338291] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 1.338363] sd 2:0:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.338371] sd 2:0:0:0: [sde] Write Protect is off
[ 1.338373] sd 2:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.338386] sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.338392] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1118 PQ: 0 ANSI: 5
[ 1.338546] sd 3:0:0:0: Attached scsi generic sg5 type 0
[ 1.338581] sd 3:0:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 1.338593] sd 3:0:0:0: [sdf] Write Protect is off
[ 1.338595] sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.338612] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.343118] sd 3:0:0:0: [sdf] Attached SCSI disk
[ 1.347244] sd 2:0:0:0: [sde] Attached SCSI disk
[ 1.366701] sdc: sdc1 sdc2 < sdc5 >
[ 1.378948] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 1.379042] sd 1:0:1:0: [sdd] Attached SCSI disk
[ 1.380572] Freeing unused decrypted memory: 2040K
[ 1.381101] Freeing unused kernel image (initmem) memory: 2636K
[ 1.396964] Write protecting the kernel read-only data: 22528k
[ 1.397723] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.397961] Freeing unused kernel image (rodata/data gap) memory: 788K
[ 1.449736] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.449795] x86/mm: Checking user space page tables
[ 1.500855] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.500861] tsc: Refined TSC clocksource calibration: 2933.297 MHz
[ 1.500866] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a4821a18a9, max_idle_ns: 440795258294 ns
[ 1.500929] clocksource: Switched to clocksource tsc
[ 1.500940] Run /init as init process
[ 1.500941] with arguments:
[ 1.500942] /init
[ 1.500942] splash
[ 1.500943] with environment:
[ 1.500943] HOME=/
[ 1.500944] TERM=linux
[ 1.500945] BOOT_IMAGE=/boot/vmlinuz-5.8.0-40-generic
[ 1.646233] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.646234] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.646450] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.647238] hid: raw HID events driver (C) Jiri Kosina
[ 1.649706] ahci 0000:02:00.0: version 3.0
[ 1.651264] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.659938] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.659942] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.663542] i2c i2c-0: 2/4 memory slots populated (from DMI)
[ 1.663545] i2c i2c-0: Memory type 0x0f not supported yet, not instantiating SPD
[ 1.666893] scsi host4: ahci
[ 1.666995] ata5: SATA max UDMA/133 abar m8192@0xfbffe000 port 0xfbffe100 irq 17
[ 1.677493] usbcore: registered new interface driver usbhid
[ 1.677495] usbhid: USB HID core driver
[ 1.693693] gpio_ich gpio_ich.2.auto: GPIO from 436 to 511
[ 1.696056] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:045E:0800.0001/input/input5
[ 1.753125] hid-generic 0003:045E:0800.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xc2\xae Nano Transceiver v2.0] on usb-0000:00:1d.0-2/input0
[ 1.757270] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/0003:045E:0800.0002/input/input6
[ 1.757407] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/0003:045E:0800.0002/input/input7
[ 1.757481] hid-generic 0003:045E:0800.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xc2\xae Nano Transceiver v2.0] on usb-0000:00:1d.0-2/input1
[ 1.757913] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:045E:0800.0003/input/input8
[ 1.782641] random: fast init done
[ 1.817143] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 System Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.2/0003:045E:0800.0003/input/input10
[ 1.817296] hid-generic 0003:045E:0800.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xc2\xae Nano Transceiver v2.0] on usb-0000:00:1d.0-2/input2
[ 1.869394] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX
[ 1.869396] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.869447] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: FFFFFF-0FF
[ 1.870409] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.980137] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.127004] fbcon: Taking over console
[ 2.127121] Console: switching to colour frame buffer device 160x64
[ 2.151699] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.340775] systemd[1]: Inserted module 'autofs4'
[ 2.360074] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.377147] systemd[1]: Detected architecture x86-64.
[ 2.397627] systemd[1]: Set hostname to ...
[ 2.691154] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 2.781722] systemd[1]: Created slice system-modprobe.slice.
[ 2.782004] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.782232] systemd[1]: Created slice User and Session Slice.
[ 2.782303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.782507] systemd[1]: Set up automount ...
[ 2.782555] systemd[1]: Reached target User and Group Name Lookups.
[ 2.782573] systemd[1]: Reached target Remote File Systems.
[ 2.782585] systemd[1]: Reached target Slices.
[ 2.782717] systemd[1]: Listening on Syslog Socket.
[ 2.782821] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.782886] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.783106] systemd[1]: Listening on Journal Audit Socket.
[ 2.783208] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.783332] systemd[1]: Listening on Journal Socket.
[ 2.783452] systemd[1]: Listening on udev Control Socket.
[ 2.783536] systemd[1]: Listening on udev Kernel Socket.
[ 2.784619] systemd[1]: Mounting Huge Pages File System...
[ 2.785663] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.787125] systemd[1]: Mounting Kernel Debug File System...
[ 2.788757] systemd[1]: Mounting Kernel Trace File System...
[ 2.790441] systemd[1]: Starting Journal Service...
[ 2.791926] systemd[1]: Starting Set the console keyboard layout...
[ 2.793610] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.795324] systemd[1]: Starting Load Kernel Module drm...
[ 2.797508] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.797579] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 2.800144] systemd[1]: Starting Load Kernel Modules...
[ 2.801932] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.803261] systemd[1]: Starting udev Coldplug all Devices...
[ 2.804931] systemd[1]: Starting Uncomplicated firewall...
[ 2.807712] systemd[1]: Mounted Huge Pages File System.
[ 2.807939] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.808134] systemd[1]: Mounted Kernel Debug File System.
[ 2.808318] systemd[1]: Mounted Kernel Trace File System.
[ 2.810535] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.811477] systemd[1]: Finished Uncomplicated firewall.
[ 2.827280] systemd[1]: XXX@XXX: Succeeded.
[ 2.827805] systemd[1]: Finished Load Kernel Module drm.
[ 2.830402] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 2.832575] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.834037] systemd[1]: Activating swap /swapfile...
[ 2.836605] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.836683] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 2.838477] systemd[1]: Starting Load/Save Random Seed...
[ 2.841460] systemd[1]: Starting Create System Users...
[ 2.846566] lp: driver loaded but no devices found
[ 2.851803] ppdev: user-space parallel port driver
[ 2.868908] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 2.869008] systemd[1]: Activated swap /swapfile.
[ 2.869186] systemd[1]: Reached target Swap.
[ 2.895399] systemd[1]: Finished Set the console keyboard layout.
[ 2.923304] systemd[1]: Finished udev Coldplug all Devices.
[ 3.286779] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 3.287358] parport0: irq 7 detected
[ 3.303645] systemd[1]: Finished Load/Save Random Seed.
[ 3.308914] systemd[1]: Finished Create System Users.
[ 3.310090] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.324188] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 3.324395] systemd[1]: Reached target Local File Systems (Pre).
[ 3.327705] systemd[1]: Mounting Mount unit for core18, revision 1880...
[ 3.330579] systemd[1]: Mounting Mount unit for gnome-3-34-1804, revision 36...
[ 3.334149] systemd[1]: Mounting Mount unit for gtk-common-themes, revision 1506...
[ 3.337170] systemd[1]: Mounting Mount unit for snap-store, revision 467...
[ 3.339883] systemd[1]: Mounting Mount unit for snapd, revision 8542...
[ 3.340973] systemd[1]: Starting udev Kernel Device Manager...
[ 3.385082] lp0: using parport0 (polling).
[ 3.388202] systemd[1]: Finished Load Kernel Modules.
[ 3.389518] systemd[1]: Mounting FUSE Control File System...
[ 3.390912] systemd[1]: Mounting Kernel Configuration File System...
[ 3.392209] systemd[1]: Starting Apply Kernel Variables...
[ 3.394455] systemd[1]: Mounted FUSE Control File System.
[ 3.396653] systemd[1]: Started Journal Service.
[ 3.406397] systemd-journald[268]: Received client request to flush runtime journal.
[ 3.819980] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.829136] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.901815] random: crng init done
[ 3.968554] pci 0000:00:00.0: Intel HD Graphics Chipset
[ 3.968574] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.969171] pci 0000:00:00.0: detected 32768K stolen memory
[ 3.969224] checking generic (d0000000 500000) vs hw (fb800000 400000)
[ 3.969225] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 3.969226] fb0: switching to inteldrmfb from VESA VGA
[ 3.969363] Console: switching to colour dummy device 80x25
[ 3.969420] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 3.971233] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.971921] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.000991] [drm] Initialized i915 1.6.0 20200515 for 0000:00:02.0 on minor 0
[ 4.042763] fbcon: i915drmfb (fb0) is primary device
[ 4.042845] Console: switching to colour frame buffer device 240x67
[ 4.042914] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 4.242129] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.263957] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 4.263960] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.263961] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.263962] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 4.263963] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 4.263964] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 4.263966] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 4.263968] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 4.263969] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 4.276824] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.276915] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.276996] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.277072] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.277145] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.441741] ath: EEPROM regdomain: 0x60
[ 4.441743] ath: EEPROM indicates we should expect a direct regpair map
[ 4.441745] ath: Country alpha2 being used: 00
[ 4.441746] ath: Regpair used: 0x60
[ 4.441815] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.445812] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.449797] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffff9da500660000, irq=16
[ 4.460643] ath9k 0000:01:00.0 wls128: renamed from wlan0
[ 10.987252] rfkill: input handler disabled
[ 11.313329] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 11.313478] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 98.785768] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 353.613919] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 828.592309] perf: interrupt took too long (3157 > 3140), lowering kernel.perf_event_max_sample_rate to 63250
[ 1231.165749] perf: interrupt took too long (3951 > 3946), lowering kernel.perf_event_max_sample_rate to 50500