[ 0.000000] Linux version 5.4.0-132-generic (XXX@XXX) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #148-Ubuntu SMP Mon Oct 17 16:02:06 UTC 2022 (Ubuntu 5.4.0-132.148-generic 5.4.212) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-132-generic root=UUID=HASH_D7B-CB14-D665-AC4F-C87964AB6267 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000032fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770TA-UD3/GA-770TA-UD3, BIOS F3 05/13/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3225.958 MHz processor [ 0.004249] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.004251] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.012393] AGP: No AGP bridge found [ 0.012467] last_pfn = 0x330000 max_arch_pfn = 0x400000000 [ 0.012470] MTRR default type: uncachable [ 0.012471] MTRR fixed ranges enabled: [ 0.012472] 00000-9FFFF write-back [ 0.012473] A0000-BFFFF uncachable [ 0.012474] C0000-C7FFF write-protect [ 0.012474] C8000-FFFFF uncachable [ 0.012475] MTRR variable ranges enabled: [ 0.012476] 0 base 000000000000 mask FFFF80000000 write-back [ 0.012477] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.012478] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.012479] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable [ 0.012480] 4 base 000100000000 mask FFFF00000000 write-back [ 0.012481] 5 base 000200000000 mask FFFF00000000 write-back [ 0.012481] 6 base 000300000000 mask FFFFE0000000 write-back [ 0.012482] 7 base 000320000000 mask FFFFF0000000 write-back [ 0.012483] TOM2: 0000000330000000 aka 13056M [ 0.013672] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.013739] total RAM covered: 3327M [ 0.014243] Found optimal setting for mtrr clean up [ 0.014245] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G [ 0.015307] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved [ 0.015312] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.016761] found SMP MP-table at [mem 0x000f4590-0x000f459f] [ 0.028738] check: Scanning 1 areas for low memory corruption [ 0.028743] Using GB pages for direct mapping [ 0.028978] RAMDISK: [mem 0x31301000-0x34977fff] [ 0.028986] ACPI: Early table checksum verification disabled [ 0.028992] ACPI: RSDP 0x00000000000F5FA0 000014 (v00 GBT ) [ 0.028994] ACPI: RSDT 0x00000000CFEE3000 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.028999] ACPI: FACP 0x00000000CFEE3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.029004] ACPI: DSDT 0x00000000CFEE30C0 007475 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.029007] ACPI: FACS 0x00000000CFEE0000 000040 [ 0.029009] ACPI: SSDT 0x00000000CFEEA600 0012F6 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.029011] ACPI: HPET 0x00000000CFEEB900 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.029013] ACPI: MCFG 0x00000000CFEEB940 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.029015] ACPI: TAMG 0x00000000CFEEB980 00038A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.029017] ACPI: APIC 0x00000000CFEEA540 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.029019] ACPI: Reserving FACP table memory at [mem 0xcfee3040-0xcfee30b3] [ 0.029020] ACPI: Reserving DSDT table memory at [mem 0xcfee30c0-0xcfeea534] [ 0.029021] ACPI: Reserving FACS table memory at [mem 0xcfee0000-0xcfee003f] [ 0.029021] ACPI: Reserving SSDT table memory at [mem 0xcfeea600-0xcfeeb8f5] [ 0.029022] ACPI: Reserving HPET table memory at [mem 0xcfeeb900-0xcfeeb937] [ 0.029023] ACPI: Reserving MCFG table memory at [mem 0xcfeeb940-0xcfeeb97b] [ 0.029023] ACPI: Reserving TAMG table memory at [mem 0xcfeeb980-0xcfeebd09] [ 0.029024] ACPI: Reserving APIC table memory at [mem 0xcfeea540-0xcfeea5fb] [ 0.029036] ACPI: Local APIC address 0xfee00000 [ 0.029130] Scanning NUMA topology in Northbridge 24 [ 0.029162] No NUMA configuration found [ 0.029162] Faking a node at [mem 0x0000000000000000-0x000000032fffffff] [ 0.029171] NODE_DATA(0) allocated [mem 0x32ffd5000-0x32fffffff] [ 0.029452] Zone ranges: [ 0.029452] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.029453] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.029454] Normal [mem 0x0000000100000000-0x000000032fffffff] [ 0.029455] Device empty [ 0.029456] Movable zone start for each node [ 0.029459] Early memory node ranges [ 0.029460] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.029460] node 0: [mem 0x0000000000100000-0x00000000cfedffff] [ 0.029461] node 0: [mem 0x0000000100000000-0x000000032fffffff] [ 0.029469] Zeroed struct page in unavailable ranges: 386 pages [ 0.029470] Initmem setup node 0 [mem 0x0000000000001000-0x000000032fffffff] [ 0.029472] On node 0 totalpages: 3145342 [ 0.029473] DMA zone: 64 pages used for memmap [ 0.029473] DMA zone: 21 pages reserved [ 0.029474] DMA zone: 3998 pages, LIFO batch:0 [ 0.029530] DMA32 zone: 13244 pages used for memmap [ 0.029530] DMA32 zone: 847584 pages, LIFO batch:63 [ 0.045148] Normal zone: 35840 pages used for memmap [ 0.045149] Normal zone: 2293760 pages, LIFO batch:63 [ 0.086729] ACPI: PM-Timer IO Port: 0x4008 [ 0.086731] ACPI: Local APIC address 0xfee00000 [ 0.086738] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.086739] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.086739] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.086740] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.086740] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.086741] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.086742] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.086742] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.086755] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.086757] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.086758] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.086759] ACPI: IRQ0 used by override. [ 0.086760] ACPI: IRQ9 used by override. [ 0.086762] Using ACPI (MADT) for SMP configuration information [ 0.086763] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.086766] smpboot: Allowing 8 CPUs, 2 hotplug CPUs [ 0.086780] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.086782] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.086782] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.086783] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.086784] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff] [ 0.086784] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff] [ 0.086785] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff] [ 0.086785] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff] [ 0.086786] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.086786] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.086787] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.086789] [mem 0xcff00000-0xdfffffff] available for PCI devices [ 0.086790] Booting paravirtualized kernel on bare hardware [ 0.086793] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.086798] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.087607] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u262144 [ 0.087612] pcpu-alloc: s208896 r8192 d28672 u262144 alloc=1*2097152 [ 0.087613] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.087640] Built 1 zonelists, mobility grouping on. Total pages: 3096173 [ 0.087641] Policy zone: Normal [ 0.087642] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-132-generic root=UUID=HASH_D7B-CB14-D665-AC4F-C87964AB6267 ro quiet splash [ 0.092004] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.094169] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.094204] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.111541] AGP: Checking aperture... [ 0.119703] AGP: No AGP bridge found [ 0.119705] AGP: Node 0: aperture [bus addr 0xe68c000000-0xe68dffffff] (32MB) [ 0.119706] Aperture beyond 4GB. Ignoring. [ 0.119706] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.119707] AGP: Please enable the IOMMU option in the BIOS setup [ 0.119707] AGP: This costs you 64MB of RAM [ 0.119710] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB) [ 0.119712] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff] [ 0.182105] Memory: 12133808K/12581368K available (14339K kernel code, 2394K rwdata, 9496K rodata, 2756K init, 4952K bss, 447560K reserved, 0K cma-reserved) [ 0.182410] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.182431] ftrace: allocating 44629 entries in 175 pages [ 0.195477] rcu: Hierarchical RCU implementation. [ 0.195479] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.195481] Tasks RCU enabled. [ 0.195482] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.195482] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.198412] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.198713] spurious 8259A interrupt: IRQ7. [ 0.201054] Console: colour VGA+ 80x25 [ 0.201058] printk: console [tty0] enabled [ 0.201084] ACPI: Core revision 20190816 [ 0.201202] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.201224] APIC: Switch to symmetric I/O mode setup [ 0.201823] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.221225] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e80134563f, max_idle_ns: 440795241592 ns [ 0.221230] Calibrating delay loop (skipped), value calculated using timer frequency.. 6451.91 BogoMIPS (lpj=12903832) [ 0.221232] pid_max: default: 32768 minimum: 301 [ 0.221297] LSM: Security Framework initializing [ 0.221316] Yama: becoming mindful. [ 0.221383] AppArmor: AppArmor initialized [ 0.221493] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.221558] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.221586] *** VALIDATE tmpfs *** [ 0.221765] *** VALIDATE proc *** [ 0.221837] *** VALIDATE cgroup1 *** [ 0.221838] *** VALIDATE cgroup2 *** [ 0.221895] LVT offset 0 assigned for vector 0xf9 [ 0.221898] process: using AMD E400 aware idle routine [ 0.221899] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 [ 0.221900] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 [ 0.221903] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.221904] Spectre V2 : Mitigation: Retpolines [ 0.221905] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.221905] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.222022] Freeing SMP alternatives memory: 40K [ 0.225240] process: System has AMD C1E enabled [ 0.336737] process: Switch to broadcast mode on CPU0 [ 0.336748] smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (family: 0x10, model: 0xa, stepping: 0x0) [ 0.336890] Performance Events: AMD PMU driver. [ 0.336893] ... version: 0 [ 0.336893] ... bit width: 48 [ 0.336893] ... generic registers: 4 [ 0.336894] ... value mask: 0000ffffffffffff [ 0.336895] ... max period: 00007fffffffffff [ 0.336895] ... fixed-purpose events: 0 [ 0.336895] ... event mask: 000000000000000f [ 0.336937] rcu: Hierarchical SRCU implementation. [ 0.337226] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.337226] smp: Bringing up secondary CPUs ... [ 0.337226] x86: Booting SMP configuration: [ 0.337226] .... node #0, CPUs: #1 [ 0.006541] do_IRQ: 1.55 No irq handler for vector [ 0.006541] process: Switch to broadcast mode on CPU1 [ 0.337226] #2 [ 0.006541] do_IRQ: 2.55 No irq handler for vector [ 0.006541] process: Switch to broadcast mode on CPU2 [ 0.339565] #3 [ 0.006541] do_IRQ: 3.55 No irq handler for vector [ 0.006541] process: Switch to broadcast mode on CPU3 [ 0.341376] #4 [ 0.006541] do_IRQ: 4.55 No irq handler for vector [ 0.006541] process: Switch to broadcast mode on CPU4 [ 0.345360] #5 [ 0.006541] do_IRQ: 5.55 No irq handler for vector [ 0.006541] process: Switch to broadcast mode on CPU5 [ 0.347930] smp: Brought up 1 node, 6 CPUs [ 0.347930] smpboot: Max logical packages: 2 [ 0.347930] smpboot: Total of 6 processors activated (38711.49 BogoMIPS) [ 0.350383] devtmpfs: initialized [ 0.350383] x86/mm: Memory block size: 128MB [ 0.353638] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes) [ 0.353638] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.353638] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.353638] pinctrl core: initialized pinctrl subsystem [ 0.353638] PM: RTC time: 20:42:55, date: 2023-03-01 [ 0.353677] NET: Registered protocol family 16 [ 0.353776] EISA bus registered [ 0.353776] cpuidle: using governor ladder [ 0.353776] cpuidle: using governor menu [ 0.353776] node 0 link 0: io port [9000, ffff] [ 0.353776] TOM: 00000000d0000000 aka 3328M [ 0.353776] Fam 10h mmconf [mem 0xe0000000-0xe00fffff] [ 0.353776] node 0 link 0: mmio [a0000, bffff] [ 0.353776] node 0 link 0: mmio [d0000000, dfffffff] [ 0.353776] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.353776] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff] [ 0.353776] TOM2: 0000000330000000 aka 13056M [ 0.353776] bus: [bus 00-06] on node 0 link 0 [ 0.353776] bus: 00 [io 0x0000-0xffff] [ 0.353776] bus: 00 [mem 0x000a0000-0x000bffff] [ 0.353776] bus: 00 [mem 0xd0000000-0xdfffffff] [ 0.353776] bus: 00 [mem 0xe0700000-0xffffffff] [ 0.353776] bus: 00 [mem 0xe0100000-0xe06fffff] [ 0.353776] bus: 00 [mem 0x330000000-0xfcffffffff] [ 0.353776] ACPI: bus type PCI registered [ 0.353776] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.353776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.353776] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.353776] PCI: Using configuration type 1 for base access [ 0.355193] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.355193] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.357323] ACPI: Added _OSI(Module Device) [ 0.357324] ACPI: Added _OSI(Processor Device) [ 0.357324] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.357325] ACPI: Added _OSI(Processor Aggregator Device) [ 0.357326] ACPI: Added _OSI(Linux-Dell-Video) [ 0.357327] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.357327] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.364231] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.364479] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.364522] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.364561] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.364599] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.364642] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.364680] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.364717] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.364755] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.364798] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.364836] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.364876] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.364918] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.364965] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.365007] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.365049] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.365091] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.365138] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190816/dspkginit-438) [ 0.365180] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190816/dspkginit-438) [ 0.365180] ACPI: Interpreter enabled [ 0.365180] ACPI: (supports S0 S3 S4 S5) [ 0.365180] ACPI: Using IOAPIC for interrupt routing [ 0.365180] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.365185] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.375216] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.375223] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.375506] PCI host bridge to bus 0000:00 [ 0.375508] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.375509] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.375510] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.375511] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.375512] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] [ 0.375513] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.375522] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000 [ 0.375534] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 0.375629] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 [ 0.375646] pci 0000:00:02.0: enabling Extended Tags [ 0.375669] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.375763] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400 [ 0.375778] pci 0000:00:06.0: enabling Extended Tags [ 0.375798] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.375884] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400 [ 0.375899] pci 0000:00:07.0: enabling Extended Tags [ 0.375919] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.376008] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400 [ 0.376023] pci 0000:00:09.0: enabling Extended Tags [ 0.376043] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.376127] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400 [ 0.376142] pci 0000:00:0a.0: enabling Extended Tags [ 0.376162] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.376258] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.376278] pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07] [ 0.376286] pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03] [ 0.376294] pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07] [ 0.376302] pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03] [ 0.376310] pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f] [ 0.376318] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff] [ 0.376338] pci 0000:00:11.0: set SATA to AHCI mode [ 0.376458] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.376474] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff] [ 0.376608] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.376624] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff] [ 0.376767] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.376786] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff] [ 0.376860] pci 0000:00:12.2: supports D1 D2 [ 0.376861] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.376955] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.376972] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff] [ 0.377105] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.377121] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff] [ 0.377121] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.377121] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff] [ 0.377121] pci 0000:00:13.2: supports D1 D2 [ 0.377121] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.377121] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.377121] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.377121] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007] [ 0.377121] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003] [ 0.377121] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007] [ 0.377121] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003] [ 0.377121] pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f] [ 0.377121] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.377121] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.377121] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.377121] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.377121] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.377121] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit] [ 0.377121] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.377121] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.377121] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.377121] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.377121] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff] [ 0.377121] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.377121] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.377121] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.377121] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.377121] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.377121] pci 0000:01:00.0: [1002:6899] type 00 class 0x030000 [ 0.377121] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.377121] pci 0000:01:00.0: reg 0x18: [mem 0xfdfc0000-0xfdfdffff 64bit] [ 0.377121] pci 0000:01:00.0: reg 0x20: [io 0xae00-0xaeff] [ 0.377121] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.377121] pci 0000:01:00.0: enabling Extended Tags [ 0.377121] pci 0000:01:00.0: supports D1 D2 [ 0.377121] pci 0000:01:00.1: [1002:aa50] type 00 class 0x040300 [ 0.377121] pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit] [ 0.377121] pci 0000:01:00.1: enabling Extended Tags [ 0.377121] pci 0000:01:00.1: supports D1 D2 [ 0.377121] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.377121] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 0.377121] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.377121] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.377121] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185 [ 0.377121] pci 0000:02:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff] [ 0.377121] pci 0000:02:00.0: PME# supported from D3hot [ 0.377121] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185 [ 0.377121] pci 0000:02:00.1: reg 0x10: [io 0xef00-0xef07] [ 0.377121] pci 0000:02:00.1: reg 0x14: [io 0xee00-0xee03] [ 0.377121] pci 0000:02:00.1: reg 0x18: [io 0xed00-0xed07] [ 0.377121] pci 0000:02:00.1: reg 0x1c: [io 0xec00-0xec03] [ 0.377121] pci 0000:02:00.1: reg 0x20: [io 0xeb00-0xeb0f] [ 0.377121] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.377121] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.377121] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.377121] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.377121] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.377121] pci 0000:03:00.0: [1b4b:91a3] type 00 class 0x01018f [ 0.377121] pci 0000:03:00.0: reg 0x10: [io 0xdf00-0xdf07] [ 0.377121] pci 0000:03:00.0: reg 0x14: [io 0xde00-0xde03] [ 0.377121] pci 0000:03:00.0: reg 0x18: [io 0xdd00-0xdd07] [ 0.377121] pci 0000:03:00.0: reg 0x1c: [io 0xdc00-0xdc03] [ 0.377121] pci 0000:03:00.0: reg 0x20: [io 0xdb00-0xdb0f] [ 0.377121] pci 0000:03:00.0: reg 0x24: [mem 0xfdcff000-0xfdcff7ff] [ 0.377121] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.377121] pci 0000:03:00.0: PME# supported from D3hot [ 0.377121] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.377121] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.377121] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.377121] pci 0000:00:07.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.377121] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.377121] pci 0000:04:00.0: reg 0x10: [mem 0xfdafe000-0xfdafffff 64bit] [ 0.377121] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.377121] pci 0000:00:09.0: PCI bridge to [bus 04] [ 0.377121] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.377121] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.377121] pci 0000:00:09.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.377121] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.377121] pci 0000:05:00.0: reg 0x10: [io 0xbe00-0xbeff] [ 0.377121] pci 0000:05:00.0: reg 0x18: [mem 0xfd6ff000-0xfd6fffff 64bit pref] [ 0.377121] pci 0000:05:00.0: reg 0x20: [mem 0xfd6f8000-0xfd6fbfff 64bit pref] [ 0.377121] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.377121] pci 0000:05:00.0: supports D1 D2 [ 0.377121] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.377121] pci 0000:00:0a.0: PCI bridge to [bus 05] [ 0.377121] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 0.377121] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff] [ 0.377121] pci 0000:00:0a.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.377121] pci_bus 0000:06: extended config space not accessible [ 0.377121] pci 0000:06:06.0: [1102:0005] type 00 class 0x040100 [ 0.377121] pci 0000:06:06.0: reg 0x10: [io 0x9f00-0x9f1f] [ 0.377121] pci 0000:06:06.0: reg 0x14: [mem 0xfbc00000-0xfbdfffff 64bit] [ 0.377121] pci 0000:06:06.0: reg 0x1c: [mem 0xf4000000-0xf7ffffff 64bit] [ 0.377121] pci 0000:06:06.0: supports D1 D2 [ 0.377121] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode) [ 0.377121] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff] [ 0.377121] pci 0000:00:14.4: bridge window [mem 0xf4000000-0xfbffffff] [ 0.377121] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref] [ 0.377121] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.377121] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.377121] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.377121] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.377121] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode) [ 0.377121] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377121] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377121] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377121] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377121] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377121] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377134] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.381257] iommu: Default domain type: Translated [ 0.381497] SCSI subsystem initialized [ 0.381513] libata version 3.00 loaded. [ 0.381513] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.381513] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.381513] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.381513] vgaarb: loaded [ 0.381513] ACPI: bus type USB registered [ 0.381513] usbcore: registered new interface driver usbfs [ 0.381513] usbcore: registered new interface driver hub [ 0.381513] usbcore: registered new device driver usb [ 0.381513] pps_core: LinuxPPS API ver. 1 registered [ 0.381513] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.381513] PTP clock support registered [ 0.381513] EDAC MC: Ver: 3.0.0 [ 0.381513] PCI: Using ACPI for IRQ routing [ 0.391137] PCI: pci_cache_line_size set to 64 bytes [ 0.391198] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.391199] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff] [ 0.391316] NetLabel: Initializing [ 0.391316] NetLabel: domain hash size = 128 [ 0.391317] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.391329] NetLabel: unlabeled traffic allowed by default [ 0.391353] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.391353] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.393299] clocksource: Switched to clocksource tsc-early [ 0.407314] *** VALIDATE bpf *** [ 0.407395] VFS: Disk quotas dquot_6.6.0 [ 0.407414] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.407442] *** VALIDATE ramfs *** [ 0.407447] *** VALIDATE hugetlbfs *** [ 0.407549] AppArmor: AppArmor Filesystem Enabled [ 0.407573] pnp: PnP ACPI init [ 0.407720] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.407722] system 00:00: [io 0x0220-0x0225] has been reserved [ 0.407723] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.407728] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.408055] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.408061] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] [ 0.408064] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:05:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 0.408088] system 00:01: [io 0x4100-0x411f] has been reserved [ 0.408089] system 00:01: [io 0x0228-0x022f] has been reserved [ 0.408090] system 00:01: [io 0x040b] has been reserved [ 0.408091] system 00:01: [io 0x04d6] has been reserved [ 0.408092] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 0.408093] system 00:01: [io 0x0c14] has been reserved [ 0.408094] system 00:01: [io 0x0c50-0x0c52] has been reserved [ 0.408095] system 00:01: [io 0x0c6c-0x0c6d] has been reserved [ 0.408096] system 00:01: [io 0x0c6f] has been reserved [ 0.408097] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 0.408098] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 0.408099] system 00:01: [io 0x0cd4-0x0cdf] has been reserved [ 0.408100] system 00:01: [io 0x4000-0x40fe] has been reserved [ 0.408101] system 00:01: [io 0x4210-0x4217] has been reserved [ 0.408102] system 00:01: [io 0x0b00-0x0b0f] has been reserved [ 0.408103] system 00:01: [io 0x0b10-0x0b1f] has been reserved [ 0.408104] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 0.408106] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved [ 0.408109] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.408285] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.408727] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved [ 0.408730] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.409008] system 00:04: [mem 0x000cf600-0x000cffff] has been reserved [ 0.409010] system 00:04: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.409011] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.409012] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.409014] system 00:04: [mem 0xcfee0000-0xcfeeffff] could not be reserved [ 0.409015] system 00:04: [mem 0xffff0000-0xffffffff] has been reserved [ 0.409016] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.409017] system 00:04: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.409018] system 00:04: [mem 0xcfef0000-0xcfefffff] has been reserved [ 0.409023] system 00:04: [mem 0xcff00000-0xcfffffff] could not be reserved [ 0.409024] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.409026] system 00:04: [mem 0xfee00000-0xfee00fff] could not be reserved [ 0.409027] system 00:04: [mem 0xfff80000-0xfffeffff] has been reserved [ 0.409030] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.409053] pnp: PnP ACPI: found 5 devices [ 0.410598] thermal_sys: Registered thermal governor 'fair_share' [ 0.410599] thermal_sys: Registered thermal governor 'bang_bang' [ 0.410600] thermal_sys: Registered thermal governor 'step_wise' [ 0.410600] thermal_sys: Registered thermal governor 'user_space' [ 0.410601] thermal_sys: Registered thermal governor 'power_allocator' [ 0.415102] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.415146] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref] [ 0.415148] pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.415150] pci 0000:00:02.0: bridge window [io 0xa000-0xafff] [ 0.415153] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.415154] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.415157] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.415158] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.415159] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff] [ 0.415161] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.415164] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref] [ 0.415165] pci 0000:00:07.0: PCI bridge to [bus 03] [ 0.415166] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.415168] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff] [ 0.415169] pci 0000:00:07.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.415171] pci 0000:00:09.0: PCI bridge to [bus 04] [ 0.415173] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] [ 0.415174] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.415176] pci 0000:00:09.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.415178] pci 0000:05:00.0: BAR 6: assigned [mem 0xfd800000-0xfd81ffff pref] [ 0.415180] pci 0000:00:0a.0: PCI bridge to [bus 05] [ 0.415181] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] [ 0.415182] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff] [ 0.415184] pci 0000:00:0a.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.415187] pci 0000:00:14.4: PCI bridge to [bus 06] [ 0.415188] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff] [ 0.415192] pci 0000:00:14.4: bridge window [mem 0xf4000000-0xfbffffff] [ 0.415195] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff pref] [ 0.415201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.415202] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.415203] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.415204] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.415205] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window] [ 0.415206] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.415207] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff] [ 0.415208] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.415209] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.415210] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.415211] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] [ 0.415212] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.415213] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] [ 0.415214] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.415215] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.415216] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.415217] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] [ 0.415218] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] [ 0.415219] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff] [ 0.415220] pci_bus 0000:05: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref] [ 0.415221] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] [ 0.415222] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xfbffffff] [ 0.415223] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff pref] [ 0.415224] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.415225] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.415225] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.415226] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.415227] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xfebfffff window] [ 0.415308] NET: Registered protocol family 2 [ 0.415905] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.417534] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.417942] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.418375] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.418522] TCP: Hash tables configured (established 131072 bind 65536) [ 0.418660] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.418780] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.418874] NET: Registered protocol family 1 [ 0.418880] NET: Registered protocol family 44 [ 0.445101] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x670 took 25579 usecs [ 0.473098] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x670 took 27331 usecs [ 0.501088] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x670 took 27135 usecs [ 0.529076] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x670 took 27323 usecs [ 0.557096] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x670 took 27153 usecs [ 0.557117] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.557126] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.557133] pci 0000:02:00.0: async suspend disabled to avoid multi-function power-on ordering issue [ 0.557137] pci 0000:02:00.1: async suspend disabled to avoid multi-function power-on ordering issue [ 0.557342] PCI: CLS 64 bytes, default 64 [ 0.557408] Trying to unpack rootfs image as initramfs... [ 0.780552] Freeing initrd memory: 55772K [ 0.781287] PCI-DMA: Disabling AGP. [ 0.781385] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.781386] PCI-DMA: using GART IOMMU. [ 0.781388] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.783294] LVT offset 1 assigned for vector 0x400 [ 0.783304] LVT offset 1 assigned [ 0.783502] perf: AMD IBS detected (0x0000001f) [ 0.783580] check: Scanning for low memory corruption every 60 seconds [ 0.784037] Initialise system trusted keyrings [ 0.784047] Key type blacklist registered [ 0.784155] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.785586] zbud: loaded [ 0.785972] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.786210] fuse: init (API version 7.31) [ 0.786228] *** VALIDATE fuse *** [ 0.786230] *** VALIDATE fuse *** [ 0.786349] Platform Keyring initialized [ 0.789273] Key type asymmetric registered [ 0.789274] Asymmetric key parser 'x509' registered [ 0.789282] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.789386] io scheduler mq-deadline registered [ 0.790321] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.790453] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.790477] ACPI: Power Button [PWRB] [ 0.790514] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.790546] ACPI: Power Button [PWRF] [ 0.790570] ACPI: ACPI: processor limited to max C-state 1 [ 0.791067] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.792639] Linux agpgart interface v0.103 [ 0.940984] loop: module loaded [ 0.941270] tun: Universal TUN/TAP device driver, 1.6 [ 0.941326] PPP generic driver version 2.4.2 [ 0.941374] VFIO - User Level meta-driver version: 0.3 [ 0.941474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.941476] ehci-pci: EHCI PCI platform driver [ 0.941630] ehci-pci 0000:00:12.2: EHCI Host Controller [ 0.941640] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.941645] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.941654] ehci-pci 0000:00:12.2: debug port 1 [ 0.941717] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 0.956950] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.957013] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.957014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.957015] usb usb1: Product: EHCI Host Controller [ 0.957016] usb usb1: Manufacturer: Linux 5.4.0-132-generic ehci_hcd [ 0.957018] usb usb1: SerialNumber: ... [ 0.957125] hub 1-0:1.0: USB hub found [ 0.957131] hub 1-0:1.0: 6 ports detected [ 0.957453] ehci-pci 0000:00:13.2: EHCI Host Controller [ 0.957457] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.957460] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.957469] ehci-pci 0000:00:13.2: debug port 1 [ 0.957517] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000 [ 0.972952] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.972988] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.972989] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.972990] usb usb2: Product: EHCI Host Controller [ 0.972991] usb usb2: Manufacturer: Linux 5.4.0-132-generic ehci_hcd [ 0.972992] usb usb2: SerialNumber: ... [ 0.973094] hub 2-0:1.0: USB hub found [ 0.973099] hub 2-0:1.0: 6 ports detected [ 0.973270] ehci-platform: EHCI generic platform driver [ 0.973285] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.973289] ohci-pci: OHCI PCI platform driver [ 0.973423] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 0.973428] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 0.973467] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.036982] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 1.036983] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.036984] usb usb3: Product: OHCI PCI host controller [ 1.036985] usb usb3: Manufacturer: Linux 5.4.0-132-generic ohci_hcd [ 1.036986] usb usb3: SerialNumber: ... [ 1.037078] hub 3-0:1.0: USB hub found [ 1.037086] hub 3-0:1.0: 3 ports detected [ 1.037314] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.037319] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.037336] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.100976] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 1.100978] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.100979] usb usb4: Product: OHCI PCI host controller [ 1.100980] usb usb4: Manufacturer: Linux 5.4.0-132-generic ohci_hcd [ 1.100981] usb usb4: SerialNumber: ... [ 1.101070] hub 4-0:1.0: USB hub found [ 1.101077] hub 4-0:1.0: 3 ports detected [ 1.101313] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.101320] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.101351] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.164976] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 1.164978] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.164979] usb usb5: Product: OHCI PCI host controller [ 1.164980] usb usb5: Manufacturer: Linux 5.4.0-132-generic ohci_hcd [ 1.164981] usb usb5: SerialNumber: ... [ 1.165074] hub 5-0:1.0: USB hub found [ 1.165081] hub 5-0:1.0: 3 ports detected [ 1.165322] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.165327] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.165345] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.212955] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.228929] usb 2-2: new high-speed USB device number 2 using ehci-pci [ 1.228986] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 1.228987] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.228988] usb usb6: Product: OHCI PCI host controller [ 1.228989] usb usb6: Manufacturer: Linux 5.4.0-132-generic ohci_hcd [ 1.228990] usb usb6: SerialNumber: ... [ 1.229078] hub 6-0:1.0: USB hub found [ 1.229085] hub 6-0:1.0: 3 ports detected [ 1.229316] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.229321] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.229351] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.273283] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 1.273284] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.273285] usb usb7: Product: OHCI PCI host controller [ 1.273286] usb usb7: Manufacturer: Linux 5.4.0-132-generic ohci_hcd [ 1.273287] usb usb7: SerialNumber: ... [ 1.273381] hub 7-0:1.0: USB hub found [ 1.273388] hub 7-0:1.0: 2 ports detected [ 1.273504] ohci-platform: OHCI generic platform driver [ 1.273512] uhci_hcd: USB Universal Host Controller Interface driver [ 1.273610] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.273614] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 1.273709] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 1.273952] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.273954] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9 [ 1.273957] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 1.277085] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.277086] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.277087] usb usb8: Product: xHCI Host Controller [ 1.277087] usb usb8: Manufacturer: Linux 5.4.0-132-generic xhci-hcd [ 1.277088] usb usb8: SerialNumber: ... [ 1.277181] hub 8-0:1.0: USB hub found [ 1.277189] hub 8-0:1.0: 2 ports detected [ 1.277277] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.277292] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 1.277293] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.277294] usb usb9: Product: xHCI Host Controller [ 1.277294] usb usb9: Manufacturer: Linux 5.4.0-132-generic xhci-hcd [ 1.277295] usb usb9: SerialNumber: ... [ 1.277376] hub 9-0:1.0: USB hub found [ 1.277384] hub 9-0:1.0: 2 ports detected [ 1.277511] i8042: PNP: No PS/2 controller found. [ 1.277513] i8042: Probing ports directly. [ 1.277938] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.277942] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.278057] mousedev: PS/2 mouse device common for all mice [ 1.278161] rtc_cmos 00:02: RTC can wake from S4 [ 1.278337] rtc_cmos 00:02: registered as rtc0 [ 1.278349] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.278356] i2c /dev entries driver [ 1.278395] device-mapper: uevent: version 1.0.3 [ 1.278460] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 1.278472] platform eisa.0: Probing EISA bus 0 [ 1.278474] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.278475] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.278476] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.278477] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.278478] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.278479] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.278479] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.278480] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.278481] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.278482] platform eisa.0: EISA: Detected 0 cards [ 1.278602] ledtrig-cpu: registered to indicate activity on CPUs [ 1.278649] drop_monitor: Initializing network drop monitor service [ 1.278848] NET: Registered protocol family 10 [ 1.285081] Segment Routing with IPv6 [ 1.285105] NET: Registered protocol family 17 [ 1.285177] Key type dns_resolver registered [ 1.285597] RAS: Correctable Errors collector initialized. [ 1.285601] microcode: microcode updated early to new patch_level=0x010000dc [ 1.285643] microcode: CPU0: patch_level=0x010000dc [ 1.285657] microcode: CPU1: patch_level=0x010000dc [ 1.285661] microcode: CPU2: patch_level=0x010000dc [ 1.285667] microcode: CPU3: patch_level=0x010000dc [ 1.285680] microcode: CPU4: patch_level=0x010000dc [ 1.285690] microcode: CPU5: patch_level=0x010000dc [ 1.285718] microcode: Microcode Update Driver: v2.2. [ 1.285721] IPI shorthand broadcast: enabled [ 1.285729] sched_clock: Marking stable (1283172684, 2541306)->(1305595832, -19881842) [ 1.285800] registered taskstats version 1 [ 1.285811] Loading compiled-in X.509 certificates [ 1.286741] Loaded X.509 cert 'Build time autogenerated kernel key: 54b9c28d4b91a0104952244eb9172297b25d660e' [ 1.287522] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.288297] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.288298] blacklist: Loading compiled-in revocation X.509 certificates [ 1.288317] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.288368] zswap: loaded using pool lzo/zbud [ 1.288508] Key type ._fscrypt registered [ 1.288509] Key type .fscrypt registered [ 1.293887] Key type big_key registered [ 1.296380] Key type encrypted registered [ 1.296383] AppArmor: AppArmor sha1 policy hashing enabled [ 1.296394] ima: No TPM chip found, activating TPM-bypass! [ 1.296402] ima: Allocated hash algorithm: sha1 [ 1.296408] ima: No architecture policies found [ 1.296416] evm: Initialising EVM extended attributes: [ 1.296417] evm: security.selinux [ 1.296417] evm: security.SMACK64 [ 1.296418] evm: security.SMACK64EXEC [ 1.296418] evm: security.SMACK64TRANSMUTE [ 1.296418] evm: security.SMACK64MMAP [ 1.296419] evm: security.apparmor [ 1.296419] evm: security.ima [ 1.296419] evm: security.capability [ 1.296420] evm: HMAC attrs: 0x1 [ 1.296821] PM: Magic number: 15:860:749 [ 1.296822] PM: hash matches drivers/base/power/main.c:853 [ 1.296852] tty ttyS0: hash matches [ 1.297002] rtc_cmos 00:02: setting system clock to 2023-03-01T20:42:56 UTC (1677703376) [ 1.297204] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.299051] Freeing unused decrypted memory: 2040K [ 1.299946] Freeing unused kernel image memory: 2756K [ 1.321317] Write protecting the kernel read-only data: 26624k [ 1.322087] Freeing unused kernel image memory: 2036K [ 1.322405] Freeing unused kernel image memory: 744K [ 1.332275] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.332277] Run /init as init process [ 1.373283] usb 1-1: New USB device found, idVendor=2001, idProduct=3c15, bcdDevice= 1.01 [ 1.373286] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.373287] usb 1-1: Product: 802.11 n WLAN [ 1.373288] usb 1-1: Manufacturer: Ralink [ 1.373289] usb 1-1: SerialNumber: ... [ 1.395976] ahci 0000:00:11.0: version 3.0 [ 1.396278] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.396280] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.397301] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) [ 1.397745] scsi host1: pata_jmicron [ 1.399552] scsi host2: pata_jmicron [ 1.399635] ata5: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19 [ 1.399636] ata6: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19 [ 1.399670] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.401777] scsi host0: ahci [ 1.403020] scsi host3: ahci [ 1.404234] r8169 0000:05:00.0 eth0: RTL8168d/8111d, XXX, XID 283, IRQ 36 [ 1.404236] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.404250] scsi host4: ahci [ 1.404504] scsi host5: ahci [ 1.404569] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.404572] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.404574] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.404576] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.407219] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20190816/utaddress-204) [ 1.407226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.410687] scsi host6: pata_atiixp [ 1.410873] scsi host7: pata_atiixp [ 1.410911] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.410912] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.415003] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.415006] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.415345] scsi host8: ahci [ 1.415484] scsi host9: ahci [ 1.415542] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 18 [ 1.415544] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 18 [ 1.415693] ahci 0000:03:00.0: controller can do FBS, turning on CAP_FBS [ 1.425954] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl IDE mode [ 1.425956] ahci 0000:03:00.0: flags: 64bit ncq fbs pio [ 1.426523] usb 2-2: New USB device found, idVendor=0644, idProduct=0200, bcdDevice= 4.00 [ 1.426525] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.426527] usb 2-2: Product: CA-200 [ 1.426528] usb 2-2: Manufacturer: TEAC [ 1.426528] usb 2-2: SerialNumber: ... [ 1.427003] scsi host10: ahci [ 1.427150] scsi host11: ahci [ 1.427790] scsi host12: ahci [ 1.427940] scsi host13: ahci [ 1.428067] scsi host14: ahci [ 1.428170] scsi host15: ahci [ 1.428285] scsi host16: ahci [ 1.428393] scsi host17: ahci [ 1.428448] ata11: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff100 irq 37 [ 1.428450] ata12: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff180 irq 37 [ 1.428452] ata13: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff200 irq 37 [ 1.428454] ata14: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff280 irq 37 [ 1.428455] ata15: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff300 irq 37 [ 1.428457] ata16: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff380 irq 37 [ 1.428459] ata17: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff400 irq 37 [ 1.428461] ata18: SATA max UDMA/133 abar m2048@0xfdcff000 port 0xfdcff480 irq 37 [ 1.501306] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 1.553303] usb 2-6: new high-speed USB device number 3 using ehci-pci [ 1.598069] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, AX13, max UDMA/66 [ 1.600858] ata8.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 1.600860] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.600864] ata8.01: ATAPI: PBDS DVD+/-RW DH-16W1S, 2D14, max UDMA/100 [ 1.626319] ata7.01: HPA detected: current 312573551, native 312581808 [ 1.626322] ata7.01: ATA-7: ST3160212ACE, 3.ACB, max UDMA/100 [ 1.626323] ata7.01: 312573551 sectors, multi 16: LBA48 [ 1.657884] usb 1-3: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00 [ 1.657886] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.657887] usb 1-3: Product: USB2.0 HUB [ 1.658166] hub 1-3:1.0: USB hub found [ 1.658254] hub 1-3:1.0: 4 ports detected [ 1.724309] ata3: SATA link down (SStatus 0 SControl 300) [ 1.736689] ata9: SATA link down (SStatus 0 SControl 300) [ 1.736717] ata10: SATA link down (SStatus 0 SControl 300) [ 1.744719] ata16: SATA link down (SStatus 0 SControl 300) [ 1.744749] ata14: SATA link down (SStatus 0 SControl 300) [ 1.744778] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.744805] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.744831] ata13: SATA link down (SStatus 0 SControl 300) [ 1.744858] ata17: SATA link down (SStatus 0 SControl 300) [ 1.744883] ata15: SATA link down (SStatus 0 SControl 300) [ 1.769294] tsc: Refined TSC clocksource calibration: 3226.026 MHz [ 1.769317] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e8053ad1a9, max_idle_ns: 440795224433 ns [ 1.769340] clocksource: Switched to clocksource tsc [ 1.785291] usb 1-4: new high-speed USB device number 4 using ehci-pci [ 1.847693] ata11.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) [ 1.876574] usb 2-6: New USB device found, idVendor=046d, idProduct=09a6, bcdDevice= 0.09 [ 1.876575] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.876576] usb 2-6: SerialNumber: ... [ 1.880270] usb-storage 2-2:1.0: USB Mass Storage device detected [ 1.880434] scsi host18: usb-storage 2-2:1.0 [ 1.880541] usbcore: registered new interface driver usb-storage [ 1.881288] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.882057] ata2.00: ATA-7: HDS728080PLA380 40Y9028LEN, PF2OA65A, max UDMA/133 [ 1.882059] ata2.00: 156312576 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.882983] ata2.00: configured for UDMA/133 [ 1.889327] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.889583] ata4.00: ATA-9: SanDisk SSD U100 8GB, 10.56.00, max UDMA/133 [ 1.889584] ata4.00: 15649200 sectors, multi 1: LBA48 NCQ (depth 32) [ 1.889862] ata4.00: configured for UDMA/133 [ 1.893318] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.920184] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133 [ 1.920185] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.942420] usb 1-4: New USB device found, idVendor=152d, idProduct=a583, bcdDevice= 2.13 [ 1.942422] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.942423] usb 1-4: Product: External [ 1.942424] usb 1-4: Manufacturer: JMicron [ 1.942425] usb 1-4: SerialNumber: ... [ 1.959503] ata1.00: configured for UDMA/133 [ 1.959688] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5 [ 1.959899] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.960017] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.960034] sd 0:0:0:0: [sda] Write Protect is off [ 1.960036] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.960064] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.960108] scsi 3:0:0:0: Direct-Access ATA HDS728080PLA380 A65A PQ: 0 ANSI: 5 [ 1.960286] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 1.960355] sd 3:0:0:0: [sdb] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.960365] sd 3:0:0:0: [sdb] Write Protect is off [ 1.960367] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.960417] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.960523] scsi 5:0:0:0: Direct-Access ATA SanDisk SSD U100 6.00 PQ: 0 ANSI: 5 [ 1.960703] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1.960801] sd 5:0:0:0: [sdc] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.960814] sd 5:0:0:0: [sdc] Write Protect is off [ 1.960815] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.960828] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.964654] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B AX13 PQ: 0 ANSI: 5 [ 1.974186] sdc: sdc1 sdc2 < sdc5 > [ 1.981405] sda: sda1 sda2 [ 1.989557] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.997494] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.019804] sdb: sdb1 sdb4 < sdb5 sdb6 > [ 2.021299] usb 1-3.1: new high-speed USB device number 5 using ehci-pci [ 2.037525] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.042251] sr 6:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.042254] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.077347] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 2.077439] sr 6:0:0:0: Attached scsi generic sg3 type 5 [ 2.093395] scsi 6:0:1:0: Direct-Access ATA ST3160212ACE B PQ: 0 ANSI: 5 [ 2.093586] sd 6:0:1:0: Attached scsi generic sg4 type 0 [ 2.093790] scsi 7:0:0:0: Direct-Access ATA WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 2.093800] sd 6:0:1:0: [sdd] 312573551 512-byte logical blocks: (160 GB/149 GiB) [ 2.093819] sd 6:0:1:0: [sdd] Write Protect is off [ 2.093821] sd 6:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.093848] sd 6:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.094022] sd 7:0:0:0: Attached scsi generic sg5 type 0 [ 2.094060] sd 7:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.094062] sd 7:0:0:0: [sde] 4096-byte physical blocks [ 2.094077] sd 7:0:0:0: [sde] Write Protect is off [ 2.094079] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.094106] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.095144] scsi 7:0:1:0: CD-ROM PBDS DVD+-RW DH-16W1S 2D14 PQ: 0 ANSI: 5 [ 2.131497] usb 1-3.1: New USB device found, idVendor=18a5, idProduct=0302, bcdDevice=11.00 [ 2.131499] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.131500] usb 1-3.1: Product: STORE N GO [ 2.131501] usb 1-3.1: Manufacturer: Verbatim [ 2.131502] usb 1-3.1: SerialNumber: ... [ 2.131732] usb-storage 1-3.1:1.0: USB Mass Storage device detected [ 2.131864] scsi host19: usb-storage 1-3.1:1.0 [ 2.163364] sr 7:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.197276] sr 7:0:1:0: Attached scsi CD-ROM sr1 [ 2.197362] sr 7:0:1:0: Attached scsi generic sg6 type 5 [ 2.201289] sdd: sdd1 < sdd5 sdd6 sdd7 sdd8 > sdd2 [ 2.201496] sdd: p7 size 94362305 extends beyond EOD, enabling native capacity [ 2.249928] sde: sde1 sde2 sde3 < sde5 sde6 sde7 sde8 sde9 sde10 > sde4 [ 2.261328] usb 1-5: new high-speed USB device number 6 using ehci-pci [ 2.269503] sd 7:0:0:0: [sde] Attached SCSI disk [ 2.419022] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32 [ 2.419024] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.419025] usb 1-5: Product: USB2.0 Hub [ 2.419380] hub 1-5:1.0: USB hub found [ 2.419767] hub 1-5:1.0: 4 ports detected [ 2.425304] scsi host20: uas [ 2.425403] usbcore: registered new interface driver uas [ 2.426712] scsi 20:0:0:0: Direct-Access JMicron Tech 0213 PQ: 0 ANSI: 6 [ 2.427861] sd 20:0:0:0: Attached scsi generic sg7 type 0 [ 2.429198] sd 20:0:0:0: [sdf] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.429200] sd 20:0:0:0: [sdf] 4096-byte physical blocks [ 2.429438] sd 20:0:0:0: [sdf] Write Protect is off [ 2.429440] sd 20:0:0:0: [sdf] Mode Sense: 6b 00 00 08 [ 2.429944] sd 20:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.430318] sd 20:0:0:0: [sdf] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 2.497284] usb 1-3.3: new high-speed USB device number 7 using ehci-pci [ 2.561734] ata7.01: n_sectors mismatch 312573551 != 312581808 [ 2.561735] ata7.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated [ 2.671296] sd 6:0:1:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.671368] sdd: detected capacity change from 160037658112 to 160041885696 [ 2.756566] sdd: sdd1 < sdd5 sdd6 sdd7 sdd8 > sdd2 [ 2.773512] sd 6:0:1:0: [sdd] Attached SCSI disk [ 2.773773] sdd: detected capacity change from 0 to 160041885696 [ 2.807256] sdd: detected capacity change from 0 to 160041885696 [ 2.899196] scsi 18:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0 [ 2.902921] scsi 18:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0 [ 2.906906] scsi 18:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0 [ 2.910145] scsi 18:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0 [ 2.910356] sd 18:0:0:0: Attached scsi generic sg8 type 0 [ 2.910473] sd 18:0:0:1: Attached scsi generic sg9 type 0 [ 2.910585] sd 18:0:0:2: Attached scsi generic sg10 type 0 [ 2.910685] sd 18:0:0:3: Attached scsi generic sg11 type 0 [ 2.982004] sd 18:0:0:2: [sdi] Attached SCSI removable disk [ 2.990468] sd 18:0:0:1: [sdh] Attached SCSI removable disk [ 2.998063] sd 18:0:0:0: [sdg] Attached SCSI removable disk [ 3.010146] sd 18:0:0:3: [sdj] Attached SCSI removable disk [ 3.112617] usb 1-3.3: New USB device found, idVendor=0781, idProduct=55a0, bcdDevice=11.00 [ 3.112619] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.112621] usb 1-3.3: Product: Timeshift [ 3.112622] usb 1-3.3: Manufacturer: Sandisk [ 3.112623] usb 1-3.3: SerialNumber: ... [ 3.112853] usb-storage 1-3.3:1.0: USB Mass Storage device detected [ 3.113028] scsi host21: usb-storage 1-3.3:1.0 [ 3.189284] usb 1-5.2: new full-speed USB device number 8 using ehci-pci [ 3.301001] usb 1-5.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.301003] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.301004] usb 1-5.2: Product: USB Receiver [ 3.301005] usb 1-5.2: Manufacturer: Logitech [ 3.305216] hidraw: raw HID events driver (C) Jiri Kosina [ 3.377285] usb 1-3.4: new high-speed USB device number 9 using ehci-pci [ 3.489426] usb 1-3.4: New USB device found, idVendor=05e3, idProduct=0751, bcdDevice=14.04 [ 3.489428] usb 1-3.4: New USB device strings: Mfr=3, Product=4, SerialNumber=... [ 3.489429] usb 1-3.4: Product: USB Storage [ 3.489429] usb 1-3.4: Manufacturer: USB Storage [ 3.490089] usb-storage 1-3.4:1.0: USB Mass Storage device detected [ 3.490253] scsi host22: usb-storage 1-3.4:1.0 [ 3.569285] usb 1-5.3: new high-speed USB device number 10 using ehci-pci [ 3.636995] scsi 19:0:0:0: Direct-Access Verbatim STORE N GO 1100 PQ: 0 ANSI: 4 [ 3.637195] sd 19:0:0:0: Attached scsi generic sg12 type 0 [ 3.638573] sd 19:0:0:0: [sdk] 15669248 512-byte logical blocks: (8.02 GB/7.47 GiB) [ 3.639593] sd 19:0:0:0: [sdk] Write Protect is off [ 3.639595] sd 19:0:0:0: [sdk] Mode Sense: 43 00 00 00 [ 3.640740] sd 19:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.676075] sdk: sdk1 sdk2 [ 3.678153] usb 1-5.3: New USB device found, idVendor=0781, idProduct=5530, bcdDevice= 1.00 [ 3.678154] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.678155] usb 1-5.3: Product: Cruzer [ 3.678156] usb 1-5.3: Manufacturer: SanDisk [ 3.678157] usb 1-5.3: SerialNumber: ... [ 3.678296] usb-storage 1-5.3:1.0: USB Mass Storage device detected [ 3.678528] scsi host23: usb-storage 1-5.3:1.0 [ 3.697982] sd 19:0:0:0: [sdk] Attached SCSI removable disk [ 3.757288] usb 1-5.4: new full-speed USB device number 11 using ehci-pci [ 3.867807] usb 1-5.4: New USB device found, idVendor=3938, idProduct=1032, bcdDevice= 1.08 [ 3.867809] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.867810] usb 1-5.4: Product: 2.4G RF Keyboard & Mouse [ 3.867811] usb 1-5.4: Manufacturer: MOSART Semi. [ 3.879568] usbcore: registered new interface driver usbhid [ 3.879569] usbhid: USB HID core driver [ 4.473271] scsi 21:0:0:0: Direct-Access Sandisk Timeshift 1100 PQ: 0 ANSI: 4 [ 4.473517] sd 21:0:0:0: Attached scsi generic sg13 type 0 [ 4.474135] sd 21:0:0:0: [sdl] 15679488 512-byte logical blocks: (8.03 GB/7.48 GiB) [ 4.475129] sd 21:0:0:0: [sdl] Write Protect is off [ 4.475131] sd 21:0:0:0: [sdl] Mode Sense: 43 00 00 00 [ 4.476119] sd 21:0:0:0: [sdl] No Caching mode page found [ 4.476162] sd 21:0:0:0: [sdl] Assuming drive cache: write through [ 4.493807] sdl: sdl1 sdl2 [ 4.516220] sd 21:0:0:0: [sdl] Attached SCSI removable disk [ 4.522710] scsi 22:0:0:0: Direct-Access Generic STORAGE DEVICE 1404 PQ: 0 ANSI: 6 [ 4.522920] sd 22:0:0:0: Attached scsi generic sg14 type 0 [ 4.604010] sdf: sdf1 [ 4.631644] sd 20:0:0:0: [sdf] Attached SCSI disk [ 4.685821] scsi 23:0:0:0: Direct-Access SanDisk Cruzer 1.02 PQ: 0 ANSI: 2 [ 4.686087] sd 23:0:0:0: Attached scsi generic sg15 type 0 [ 4.686678] sd 23:0:0:0: [sdn] 7813120 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 4.687696] sd 23:0:0:0: [sdn] Write Protect is off [ 4.687698] sd 23:0:0:0: [sdn] Mode Sense: 03 00 00 00 [ 4.688685] sd 23:0:0:0: [sdn] No Caching mode page found [ 4.688727] sd 23:0:0:0: [sdn] Assuming drive cache: write through [ 4.725703] sdn: sdn1 sdn2 sdn3 sdn4 [ 4.748461] sd 23:0:0:0: [sdn] Attached SCSI removable disk [ 4.792287] sd 22:0:0:0: [sdm] 2095104000 512-byte logical blocks: (1.07 TB/999 GiB) [ 4.793779] sd 22:0:0:0: [sdm] Write Protect is off [ 4.793781] sd 22:0:0:0: [sdm] Mode Sense: 21 00 00 00 [ 4.795275] sd 22:0:0:0: [sdm] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.815699] sdm: sdm1 [ 4.853553] sd 22:0:0:0: [sdm] Attached SCSI removable disk [ 5.135351] random: crng init done [ 6.825327] ata18.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0) [ 6.825364] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6.826063] ata12.00: ATA-9: WDC WD5000LPVX-28V0TT0, 01.01A01, max UDMA/133 [ 6.826065] ata12.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 6.826772] ata12.00: configured for UDMA/133 [ 7.140997] ata18: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.141024] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.141070] ata18.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 [ 7.141184] ata18.00: configured for UDMA/66 [ 7.143344] ata11.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133 [ 7.143346] ata11.00: 398297088 sectors, multi 8: LBA48 NCQ (depth 32) [ 7.146685] ata11.00: configured for UDMA/133 [ 7.146830] scsi 10:0:0:0: Direct-Access ATA Maxtor 6V200E0 1630 PQ: 0 ANSI: 5 [ 7.147075] sd 10:0:0:0: Attached scsi generic sg16 type 0 [ 7.147201] sd 10:0:0:0: [sdo] 398297088 512-byte logical blocks: (204 GB/190 GiB) [ 7.147217] sd 10:0:0:0: [sdo] Write Protect is off [ 7.147219] sd 10:0:0:0: [sdo] Mode Sense: 00 3a 00 00 [ 7.147245] sd 10:0:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.147291] scsi 11:0:0:0: Direct-Access ATA WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5 [ 7.147504] sd 11:0:0:0: Attached scsi generic sg17 type 0 [ 7.147593] sd 11:0:0:0: [sdp] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 7.147594] sd 11:0:0:0: [sdp] 4096-byte physical blocks [ 7.147626] sd 11:0:0:0: [sdp] Write Protect is off [ 7.147628] sd 11:0:0:0: [sdp] Mode Sense: 00 3a 00 00 [ 7.147668] sd 11:0:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.147766] scsi 17:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5 [ 7.147885] scsi 17:0:0:0: Attached scsi generic sg18 type 3 [ 7.191616] sdo: sdo1 [ 7.205386] sd 10:0:0:0: [sdo] Attached SCSI disk [ 7.208402] sdp: sdp1 sdp2 sdp3 sdp4 sdp5 sdp6 sdp8 [ 7.229493] sd 11:0:0:0: [sdp] Attached SCSI disk [ 7.231569] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 7.236506] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.0/0003:046D:C52B.0001/input/input5 [ 7.297366] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.2-5.2/input0 [ 7.297705] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.1/0003:046D:C52B.0002/input/input6 [ 7.297812] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.1/0003:046D:C52B.0002/input/input7 [ 7.357420] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.1/0003:046D:C52B.0002/input/input8 [ 7.357528] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-5.2/input1 [ 7.357843] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-5.2/input2 [ 7.358076] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.0/0003:3938:1032.0004/input/input10 [ 7.417368] hid-generic 0003:3938:1032.0004: input,hidraw3: USB HID v1.10 Keyboard [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:12.2-5.4/input0 [ 7.417721] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.1/0003:3938:1032.0005/input/input11 [ 7.417804] input: MOSART Semi. 2.4G RF Keyboard & Mouse Consumer Control as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.1/0003:3938:1032.0005/input/input12 [ 7.477403] input: MOSART Semi. 2.4G RF Keyboard & Mouse System Control as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.1/0003:3938:1032.0005/input/input13 [ 7.477462] input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.4/1-5.4:1.1/0003:3938:1032.0005/input/input15 [ 7.477553] hid-generic 0003:3938:1032.0005: input,hiddev2,hidraw4: USB HID v1.10 Mouse [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:12.2-5.4/input1 [ 7.689979] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-5.2/input2 [ 7.811294] input: Logitech Unifying Device. Wireless PID:402d Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input16 [ 7.811365] input: Logitech Unifying Device. Wireless PID:402d Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input17 [ 7.811456] hid-generic 0003:046D:402D.0006: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:402d] on usb-0000:00:12.2-5.2/input2:1 [ 7.908570] logitech-hidpp-device 0003:046D:402D.0006: hidraw1: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:12.2-5.2/input2:1 [ 11.247647] EXT4-fs (sdp8): mounted filesystem with ordered data mode. Opts: (null) [ 13.026523] systemd[1]: Inserted module 'autofs4' [ 13.160532] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 13.177353] systemd[1]: Detected architecture x86-64. [ 13.199600] systemd[1]: Set hostname to ... [ 17.451142] systemd[1]: Configuration file /lib/systemd/system/impcremote.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 17.518058] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid \xe2\x86\x92 /run/teamviewerd.pid; please update the unit file accordingly. [ 18.173828] systemd[1]: Created slice system-modprobe.slice. [ 18.174021] systemd[1]: Created slice User and Session Slice. [ 18.174069] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 18.174235] systemd[1]: Set up automount ... [ 18.174284] systemd[1]: Reached target User and Group Name Lookups. [ 18.174295] systemd[1]: Reached target Remote File Systems. [ 18.174305] systemd[1]: Reached target Slices. [ 18.174316] systemd[1]: Reached target Mounting snaps. [ 18.174390] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 18.174458] systemd[1]: Listening on LVM2 poll daemon socket. [ 18.174518] systemd[1]: Listening on Syslog Socket. [ 18.174574] systemd[1]: Listening on fsck to fsckd communication Socket. [ 18.174614] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 18.174743] systemd[1]: Listening on Journal Audit Socket. [ 18.174798] systemd[1]: Listening on Journal Socket (/dev/log). [ 18.174869] systemd[1]: Listening on Journal Socket. [ 18.174962] systemd[1]: Listening on Network Service Netlink Socket. [ 18.175026] systemd[1]: Listening on udev Control Socket. [ 18.175071] systemd[1]: Listening on udev Kernel Socket. [ 18.175851] systemd[1]: Mounting Huge Pages File System... [ 18.176848] systemd[1]: Mounting POSIX Message Queue File System... [ 18.177892] systemd[1]: Mounting Kernel Debug File System... [ 18.178832] systemd[1]: Mounting Kernel Trace File System... [ 18.180225] systemd[1]: Starting Journal Service... [ 18.181103] systemd[1]: Starting Availability of block devices... [ 18.195747] systemd[1]: Starting Set the console keyboard layout... [ 18.196801] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 18.197691] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 18.198679] systemd[1]: Starting Load Kernel Module chromeos_pstore... [ 18.199568] systemd[1]: Starting Load Kernel Module drm... [ 18.200531] systemd[1]: Starting Load Kernel Module efi_pstore... [ 18.201482] systemd[1]: Starting Load Kernel Module pstore_blk... [ 18.202384] systemd[1]: Starting Load Kernel Module pstore_zone... [ 18.203305] systemd[1]: Starting Load Kernel Module ramoops... [ 18.203359] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped. [ 18.204260] systemd[1]: Started Nameserver information manager. [ 18.204399] systemd[1]: Reached target Network (Pre). [ 18.274615] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 18.274666] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 18.336336] systemd[1]: Starting Load Kernel Modules... [ 18.337165] systemd[1]: Starting Remount Root and Kernel File Systems... [ 18.338430] systemd[1]: Starting udev Coldplug all Devices... [ 18.339750] systemd[1]: Starting Uncomplicated firewall... [ 18.342051] systemd[1]: Mounted Huge Pages File System. [ 18.342167] systemd[1]: Mounted POSIX Message Queue File System. [ 18.342256] systemd[1]: Mounted Kernel Debug File System. [ 18.342346] systemd[1]: Mounted Kernel Trace File System. [ 18.342884] systemd[1]: Finished Availability of block devices. [ 18.402886] systemd[1]: Started Journal Service. [ 18.462522] EXT4-fs (sdp8): re-mounted. Opts: errors=remount-ro [ 18.810818] systemd-journald[377]: Received client request to flush runtime journal. [ 19.128375] lp: driver loaded but no devices found [ 19.132509] ppdev: user-space parallel port driver [ 24.671024] snd_ctxfi 0000:06:06.0: chip 20K1 model SB073x (1102:0029) is found [ 24.787668] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 24.843667] [drm] radeon kernel modesetting enabled. [ 24.843823] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff [ 24.843825] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xfdfc0000 -> 0xfdfdffff [ 24.843827] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 24.844455] Console: switching to colour dummy device 80x25 [ 24.844717] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899 0x1002:0x0B00 0x00). [ 24.844761] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:04 [mem 0x000cf600-0x000cffff] [ 24.844765] caller pci_map_rom+0x71/0x1a0 mapping multiple BARs [ 24.845546] ATOM BIOS: CYPRESS [ 24.845614] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 24.845615] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 24.845618] [drm] Detected VRAM RAM=1024M, BAR=256M [ 24.845619] [drm] RAM width 256bits DDR [ 24.845700] [TTM] Zone kernel: Available graphics memory: 6131558 KiB [ 24.845700] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 24.845701] [TTM] Initializing pool allocator [ 24.845705] [TTM] Initializing DMA pool allocator [ 24.845723] [drm] radeon: 1024M of VRAM memory ready [ 24.845724] [drm] radeon: 1024M of GTT memory ready. [ 24.845730] [drm] Loading CYPRESS Microcode [ 24.901958] mc: Linux media interface: v0.10 [ 24.915917] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input21 [ 24.923811] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 24.923813] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 24.923814] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 24.923815] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 24.923815] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 24.923889] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 24.923891] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 24.923892] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 24.923893] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 24.923894] snd_hda_codec_realtek hdaudioC1D0: CD=0x1c [ 24.923895] snd_hda_codec_realtek hdaudioC1D0: dig-in=0x1f [ 24.939752] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input22 [ 24.939810] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input23 [ 24.939854] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input24 [ 24.939899] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input25 [ 24.939939] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input26 [ 24.939980] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input27 [ 24.940022] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input28 [ 24.940093] snd_hda_intel 0000:00:14.2: device 1458:a002 is on the power_save blacklist, forcing power_save to 0 [ 25.017869] snd_ctxfi 0000:06:06.0: Use xfi-native timer [ 25.028800] videodev: Linux video capture interface: v2.00 [ 25.103642] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 25.104088] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 25.355959] kvm: disabled by bios [ 25.393960] kvm: disabled by bios [ 25.414263] usb 2-6: Warning! Unlikely big volume range (=5120), cval->res is probably wrong. [ 25.414265] usb 2-6: [5] FU [Mic Capture Volume] ch = 1, val = 2816/7936/1 [ 25.414547] usbcore: registered new interface driver snd-usb-audio [ 25.426557] kvm: disabled by bios [ 25.465976] kvm: disabled by bios [ 25.501574] MCE: In-kernel MCE decoding enabled. [ 25.502155] kvm: disabled by bios [ 25.533977] kvm: disabled by bios [ 25.578727] EDAC amd64: Node 0: DRAM ECC disabled. [ 25.578729] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 25.633826] EDAC amd64: Node 0: DRAM ECC disabled. [ 25.633827] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 25.634113] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a6) [ 25.673617] EDAC amd64: Node 0: DRAM ECC disabled. [ 25.673619] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 25.676048] input: UVC Camera (046d:09a6) as /devices/pci0000:00/0000:00:13.2/usb2/2-6/2-6:1.0/input/input29 [ 25.676122] usbcore: registered new interface driver uvcvideo [ 25.676123] USB Video Class driver (1.1.1) [ 25.693300] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 25.703170] [drm] Internal thermal controller with fan control [ 25.734067] [drm] radeon: dpm initialized [ 25.749722] EDAC amd64: Node 0: DRAM ECC disabled. [ 25.749724] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 25.799624] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 25.801074] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 25.805662] EDAC amd64: Node 0: DRAM ECC disabled. [ 25.805665] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 25.820710] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 25.820799] radeon 0000:01:00.0: WB enabled [ 25.820802] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000000052466e35 [ 25.820804] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x000000008cee056f [ 25.821166] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x000000000770d4aa [ 25.821168] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 25.821169] [drm] Driver supports precise vblank timestamp query. [ 25.821170] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 25.821219] radeon 0000:01:00.0: radeon: using MSI. [ 25.821320] [drm] radeon: irq initialized. [ 25.837905] [drm] ring test on 0 succeeded in 1 usecs [ 25.837911] [drm] ring test on 3 succeeded in 3 usecs [ 25.858520] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected [ 25.886661] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected [ 25.886926] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 25.887374] usbcore: registered new interface driver rt2800usb [ 26.023614] [drm] ring test on 5 succeeded in 1 usecs [ 26.023619] [drm] UVD initialized successfully. [ 26.023972] [drm] ib test on ring 0 succeeded in 0 usecs [ 26.024017] [drm] ib test on ring 3 succeeded in 0 usecs [ 26.201761] EDAC amd64: Node 0: DRAM ECC disabled. [ 26.201762] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 26.697298] [drm] ib test on ring 5 succeeded [ 26.697914] [drm] Radeon Display Connectors [ 26.697915] [drm] Connector 0: [ 26.697915] [drm] DP-1 [ 26.697916] [drm] HPD4 [ 26.697917] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 26.697917] [drm] Encoders: [ 26.697918] [drm] DFP1: INTERNAL_UNIPHY2 [ 26.697918] [drm] Connector 1: [ 26.697918] [drm] HDMI-A-1 [ 26.697919] [drm] HPD5 [ 26.697920] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 26.697920] [drm] Encoders: [ 26.697920] [drm] DFP2: INTERNAL_UNIPHY2 [ 26.697920] [drm] Connector 2: [ 26.697921] [drm] DVI-I-1 [ 26.697921] [drm] HPD1 [ 26.697922] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 26.697922] [drm] Encoders: [ 26.697922] [drm] DFP3: INTERNAL_UNIPHY1 [ 26.697923] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 26.697923] [drm] Connector 3: [ 26.697923] [drm] DVI-I-2 [ 26.697924] [drm] HPD6 [ 26.697924] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 26.697925] [drm] Encoders: [ 26.697925] [drm] DFP4: INTERNAL_UNIPHY [ 26.697925] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 26.797778] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD [ 26.797796] snd_hda_codec_hdmi hdaudioC2D0: HDMI ATI/AMD: no speaker allocation for ELD [ 26.881041] [drm] fb mappable at 0xD034D000 [ 26.881042] [drm] vram apper at 0xD0000000 [ 26.881043] [drm] size 8294400 [ 26.881043] [drm] fb depth is 24 [ 26.881043] [drm] pitch is 7680 [ 26.881135] fbcon: radeondrmfb (fb0) is primary device [ 26.911818] Console: switching to colour frame buffer device 240x67 [ 26.916933] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 26.930702] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 28.769287] usb 2-6: reset high-speed USB device number 3 using ehci-pci [ 28.844886] rt2800usb 1-1:1.0 wlx908d78204a2b: renamed from wlan0 [ 32.961267] Adding 2973692k swap on /dev/mapper/XXXXXXXXXXXX Priority:-2 extents:1 across:2973692k FS [ 46.113477] RTL8211B Gigabit Ethernet r8169-0-500:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-500:00, irq=IGNORE) [ 46.259443] r8169 0000:05:00.0 enp5s0: Link is Down [ 46.267578] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 46.354337] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 48.858524] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 48.858548] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready [ 49.007248] wlx908d78204a2b: authenticate with XXX [ 49.025961] wlx908d78204a2b: send auth to XXX (try 1/3) [ 49.029205] wlx908d78204a2b: authenticated [ 49.037347] wlx908d78204a2b: associate with XXX (try 1/3) [ 49.049972] wlx908d78204a2b: RX AssocResp from XXX (capab=0x1411 status=0 aid=2) [ 49.060626] wlx908d78204a2b: associated [ 49.320636] wlx908d78204a2b: Limiting TX power to 20 (20 - 0) dBm as advertised by XXX [ 49.322156] IPv6: ADDRCONF(NETDEV_CHANGE): wlx908d78204a2b: link becomes ready [ 86.515642] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.517634] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.525603] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.539569] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.547579] logitech-hidpp-device 0003:046D:402D.0006: HID++ 2.0 device connected. [ 86.555508] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.571448] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.587387] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.601334] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.617271] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.633189] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.647160] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.679037] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.694951] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.710957] logitech-hidpp-device 0003:046D:402D.0006: error in parameter [ 86.719122] input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0003/0003:046D:402D.0006/input/input30 [ 91.228006] rfkill: input handler disabled [ 99.103668] rfkill: input handler enabled [ 210.783083] EXT4-fs (dm-1): recovery complete [ 210.795587] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 213.483223] EXT4-fs (sdc1): recovery complete [ 213.483898] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 216.058148] EXT4-fs (sdb6): recovery complete [ 216.069382] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null) [ 218.118601] EXT4-fs (sdp5): recovery complete [ 218.138058] EXT4-fs (sdp5): mounted filesystem with ordered data mode. Opts: (null) [ 228.721255] EXT4-fs (sde9): recovery complete [ 228.735128] EXT4-fs (sde9): mounted filesystem with ordered data mode. Opts: (null) [ 230.706448] EXT4-fs (sdd7): recovery complete [ 230.714498] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null) [ 235.048114] EXT4-fs (sdp3): recovery complete [ 235.080337] EXT4-fs (sdp3): mounted filesystem with ordered data mode. Opts: (null) [ 237.068675] EXT4-fs (sde8): recovery complete [ 237.080916] EXT4-fs (sde8): mounted filesystem with ordered data mode. Opts: (null) [ 242.191547] EXT4-fs (sdd6): recovery complete [ 242.199466] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null) [ 250.501675] EXT4-fs (sdp2): recovery complete [ 250.547739] EXT4-fs (sdp2): mounted filesystem with ordered data mode. Opts: (null) [ 253.461495] EXT4-fs (sde7): recovery complete [ 253.472848] EXT4-fs (sde7): mounted filesystem with ordered data mode. Opts: (null) [ 257.204820] EXT4-fs (sdp1): recovery complete [ 257.245354] EXT4-fs (sdp1): mounted filesystem with ordered data mode. Opts: (null) [ 260.668870] EXT4-fs (sde6): recovery complete [ 260.676092] EXT4-fs (sde6): mounted filesystem with ordered data mode. Opts: (null) [ 264.365232] EXT4-fs (sdb1): recovery complete [ 264.378634] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 266.544503] EXT4-fs (sde4): recovery complete [ 266.551587] EXT4-fs (sde4): mounted filesystem with ordered data mode. Opts: (null) [ 277.167123] EXT4-fs (sde1): recovery complete [ 277.179130] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [ 283.640652] FAT-fs (sdk2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 286.795865] EXT4-fs (sdn4): recovery complete [ 286.797467] EXT4-fs (sdn4): mounted filesystem with ordered data mode. Opts: (null) [ 289.196638] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 289.198677] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 289.200358] ISO 9660 Extensions: RRIP_1991A [10903.952103] SGI XFS with ACLs, security attributes, realtime, no debug enabled [10904.041761] JFS: nTxBlock = 8192, nTxLock = 65536 [10904.118098] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [10904.208113] QNX4 filesystem 0.2.3 registered. [10904.407681] raid6: sse2x4 gen() 2295 MB/s [10904.455603] raid6: sse2x4 xor() 971 MB/s [10904.503581] raid6: sse2x2 gen() 1901 MB/s [10904.551536] raid6: sse2x2 xor() 1752 MB/s [10904.599497] raid6: sse2x1 gen() 1151 MB/s [10904.647452] raid6: sse2x1 xor() 1087 MB/s [10904.647455] raid6: using algorithm sse2x4 gen() 2295 MB/s [10904.647457] raid6: .... xor() 971 MB/s, rmw enabled [10904.647460] raid6: using intx1 recovery algorithm [10904.677998] xor: measuring software checksum speed [10904.715355] prefetch64-sse: 13306.000 MB/sec [10904.755319] generic_sse: 13405.000 MB/sec [10904.755320] xor: using function: generic_sse (13405.000 MB/sec) [10904.869037] Btrfs loaded, crc32c=crc32c-generic [11187.882533] ata18.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0 [11187.882544] ata18.00: irq_stat 0x40000001 [11187.882566] ata18.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 3 dma 16640 in Inquiry 12 01 80 00 ff 00res 40/00:00:00:00:20/00:00:00:00:00/00 Emask 0x1 (device error) [11187.882572] ata18.00: status: { DRDY } [11187.918495] ata18.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0 [11187.918504] ata18.00: irq_stat 0x40000001 [11187.918524] ata18.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 4 dma 16640 in Mode Sense(6) 1a 00 3f 00 ff 00res 40/00:00:00:00:20/00:00:00:00:00/00 Emask 0x1 (device error) [11187.918530] ata18.00: status: { DRDY }