[ 0.000000] Linux version 5.4.25+ (XXX@XXX) (Chromium OS 11.0_pre383902_p20200312-r7 clang version 11.0.0 (/var/cache/chromeos-cache/distfiles/host/egit-src/llvm-project e21b39a86dd6e8d1a5a5fe7e0286f8570732834d)) #15 SMP Tue Sep 1 22:26:10 UTC 2020 [ 0.000000] Command line: BOOT_IMAGE=vmlinuz.A init=/sbin/init boot=local rootwait ro noresume noswap quiet loglevel=3 noinitrd console= dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=1 root=/dev/dm-0 i915.modeset=1 cros_legacy cros_debug dm="1 vroot none ro 1,0 6082560 verity payload=PARTUUID=HASH_AEA-FBD1-E7C4-B587-F084A4F00DF8 hashtree=PARTUUID=HASH_AEA-FBD1-E7C4-B587-F084A4F00DF8 hashstart=6082560 alg=sha256 root_hexdigest=HASH_DC4-2634-FB2D-A661-E62B70124B34 salt=HASH_202-4B7D-B33E-C8D1-00386A05CB86" [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000075139fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007513a000-0x000000007515bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007515c000-0x000000007846bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007846c000-0x0000000078a6bfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078a6c000-0x0000000078b6bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000078b6c000-0x0000000078babfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000078bac000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. Inspiron 3646/0V6D8J, BIOS A10 02/07/2018 [ 0.000000] tsc: Initial usec timer 12226443 [ 0.000000] tsc: Detected 2415.700 MHz processor [ 0.001408] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001412] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001426] last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.001430] MTRR default type: uncachable [ 0.001432] MTRR fixed ranges enabled: [ 0.001435] 00000-9FFFF write-back [ 0.001437] A0000-BFFFF uncachable [ 0.001439] C0000-FFFFF write-protect [ 0.001441] MTRR variable ranges enabled: [ 0.001443] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.001446] 1 base 0FFB00000 mask FFFF00000 write-protect [ 0.001448] 2 base 000000000 mask F80000000 write-back [ 0.001450] 3 base 07C000000 mask FFC000000 uncachable [ 0.001452] 4 base 07B000000 mask FFF000000 uncachable [ 0.001454] 5 base 07AE00000 mask FFFE00000 uncachable [ 0.001456] 6 base 100000000 mask F80000000 write-back [ 0.001458] 7 disabled [ 0.001545] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001655] last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 0.006666] check: Scanning 1 areas for low memory corruption [ 0.006681] BRK [0x146c01000, 0x146c01fff] PGTABLE [ 0.006685] BRK [0x146c02000, 0x146c02fff] PGTABLE [ 0.006687] BRK [0x146c03000, 0x146c03fff] PGTABLE [ 0.006776] BRK [0x146c04000, 0x146c04fff] PGTABLE [ 0.006780] BRK [0x146c05000, 0x146c05fff] PGTABLE [ 0.007023] BRK [0x146c06000, 0x146c06fff] PGTABLE [ 0.007148] BRK [0x146c07000, 0x146c07fff] PGTABLE [ 0.007221] BRK [0x146c08000, 0x146c08fff] PGTABLE [ 0.007297] BRK [0x146c09000, 0x146c09fff] PGTABLE [ 0.007497] BRK [0x146c0a000, 0x146c0afff] PGTABLE [ 0.007663] BRK [0x146c0b000, 0x146c0bfff] PGTABLE [ 0.007895] ACPI: Early table checksum verification disabled [ 0.007901] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.007906] ACPI: XSDT 0x0000000078BAB120 0000AC (v01 DELL WN09 00000003 01000013) [ 0.007915] ACPI: FACP 0x0000000078BA7000 00010C (v05 DELL WN09 00000003 ASL 00040000) [ 0.007925] ACPI: DSDT 0x0000000078B96000 00B354 (v02 DELL WN09 00000003 ASL 00040000) [ 0.007931] ACPI: FACS 0x0000000078AC4000 000040 [ 0.007936] ACPI: UEFI 0x0000000078BAA000 000236 (v01 DELL WN09 00000001 ASL 00040000) [ 0.007942] ACPI: MSDM 0x0000000078BA9000 000055 (v03 DELL WN09 00000001 ASL 00040000) [ 0.007947] ACPI: UEFI 0x0000000078BA8000 000042 (v01 DELL WN09 00000000 ASL 00040000) [ 0.007953] ACPI: HPET 0x0000000078BA6000 000038 (v01 DELL WN09 00000003 ASL 00040000) [ 0.007959] ACPI: LPIT 0x0000000078BA5000 000104 (v01 DELL WN09 00000003 ASL 00040000) [ 0.007964] ACPI: APIC 0x0000000078BA4000 000084 (v03 DELL WN09 00000003 ASL 00040000) [ 0.007970] ACPI: MCFG 0x0000000078BA3000 00003C (v01 DELL WN09 00000003 ASL 00040000) [ 0.007975] ACPI: SLIC 0x0000000078BA2000 000176 (v01 DELL WN09 00000003 ASL 00040000) [ 0.007981] ACPI: SSDT 0x0000000078B94000 0007DB (v01 INSYDE SgPch 00000003 ACPI 00040000) [ 0.007987] ACPI: SSDT 0x0000000078B93000 000507 (v01 INSYDE Cpu0Ist 00003000 ACPI 00040000) [ 0.007992] ACPI: SSDT 0x0000000078B92000 000433 (v01 INSYDE Cpu0Cst 00003001 ACPI 00040000) [ 0.007998] ACPI: SSDT 0x0000000078B91000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000) [ 0.008003] ACPI: SSDT 0x0000000078B90000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000) [ 0.008009] ACPI: SSDT 0x0000000078B8F000 00022B (v01 INSYDE IsctTabl 00001000 ACPI 00040000) [ 0.008015] ACPI: SSDT 0x0000000078B8E000 00017C (v01 INSYDE SIOACPI 00001000 ACPI 00040000) [ 0.008020] ACPI: FPDT 0x0000000078B8D000 000044 (v01 DELL WN09 00000001 ASL 00040000) [ 0.008033] ACPI: Local APIC address 0xfee00000 [ 0.008066] Zone ranges: [ 0.008068] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008070] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.008073] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.008075] Movable zone start for each node [ 0.008076] Early memory node ranges [ 0.008077] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.008080] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.008081] node 0: [mem 0x000000001f100000-0x000000001fffffff] [ 0.008083] node 0: [mem 0x0000000020100000-0x0000000075139fff] [ 0.008085] node 0: [mem 0x000000007515c000-0x000000007846bfff] [ 0.008086] node 0: [mem 0x0000000078bac000-0x0000000079ffffff] [ 0.008088] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.008561] Zeroed struct page in unavailable ranges: 27077 pages [ 0.008563] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.008567] On node 0 totalpages: 1021499 [ 0.008570] DMA zone: 64 pages used for memmap [ 0.008571] DMA zone: 22 pages reserved [ 0.008573] DMA zone: 3997 pages, LIFO batch:0 [ 0.008672] DMA32 zone: 7707 pages used for memmap [ 0.008673] DMA32 zone: 493214 pages, LIFO batch:63 [ 0.023308] Normal zone: 8192 pages used for memmap [ 0.023310] Normal zone: 524288 pages, LIFO batch:63 [ 0.035437] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.035448] Reserving Intel graphics memory at [mem 0x7b000000-0x7effffff] [ 0.035531] ACPI: PM-Timer IO Port: 0x408 [ 0.035536] ACPI: Local APIC address 0xfee00000 [ 0.035547] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.035549] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.035550] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.035552] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.035565] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 0.035569] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.035572] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.035575] ACPI: IRQ0 used by override. [ 0.035577] ACPI: IRQ9 used by override. [ 0.035580] Using ACPI (MADT) for SMP configuration information [ 0.035582] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.035591] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.035637] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.035639] Booting paravirtualized kernel on bare hardware [ 0.035644] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.181870] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.182714] percpu: Embedded 51 pages/cpu s168680 r8192 d32024 u524288 [ 0.182729] pcpu-alloc: s168680 r8192 d32024 u524288 alloc=1*2097152 [ 0.182731] pcpu-alloc: [0] 0 1 2 3 [ 0.182770] Built 1 zonelists, mobility grouping on. Total pages: 1005514 [ 0.182776] Kernel command line: BOOT_IMAGE=vmlinuz.A init=/sbin/init boot=local rootwait ro noresume noswap quiet loglevel=3 noinitrd console= dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=1 root=/dev/dm-0 i915.modeset=1 cros_legacy cros_debug dm="1 vroot none ro 1,0 6082560 verity payload=PARTUUID=HASH_AEA-FBD1-E7C4-B587-F084A4F00DF8 hashtree=PARTUUID=HASH_AEA-FBD1-E7C4-B587-F084A4F00DF8 hashstart=6082560 alg=sha256 root_hexdigest=HASH_DC4-2634-FB2D-A661-E62B70124B34 salt=HASH_202-4B7D-B33E-C8D1-00386A05CB86" [ 0.184385] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.185053] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.185108] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.236441] Memory: 3922808K/4085996K available (12296K kernel code, 1389K rwdata, 3580K rodata, 1624K init, 760K bss, 163188K reserved, 0K cma-reserved) [ 0.236574] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.236596] Kernel/User page tables isolation: enabled [ 0.236626] ftrace: allocating 43623 entries in 171 pages [ 0.256756] rcu: Hierarchical RCU implementation. [ 0.256760] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.256762] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.256764] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.261385] NR_IRQS: 16640, nr_irqs: 1024, preallocated irqs: 16 [ 0.261834] random: crng done (trusting CPU's manufacturer) [ 0.261879] ACPI: Core revision 20190816 [ 0.262080] APIC: Switch to symmetric I/O mode setup [ 0.262925] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22d226b40b0, max_idle_ns: 440795220115 ns [ 0.262929] Calibrating delay loop (skipped), value calculated using timer frequency.. 4831.40 BogoMIPS (lpj=2415700) [ 0.262933] pid_max: default: 32768 minimum: 301 [ 0.262976] LSM: Security Framework initializing [ 0.262984] Yama: becoming mindful. [ 0.262991] LoadPin: ready to pin (currently enforcing) [ 0.262995] Chromium OS LSM: enabled [ 0.263030] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.263048] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.263431] process: using mwait in idle threads [ 0.263436] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.263438] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.263440] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.263449] Spectre V2 : Mitigation: Full generic retpoline [ 0.263450] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.263451] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.263456] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.263458] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.263723] Freeing SMP alternatives memory: 40K [ 0.263927] TSC deadline timer enabled [ 0.263927] smpboot: CPU0: Intel(R) Pentium(R) CPU J2900 @ 2.41GHz (family: 0x6, model: 0x37, stepping: 0x8) [ 0.263927] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.263927] ... version: 3 [ 0.263927] ... bit width: 40 [ 0.263927] ... generic registers: 2 [ 0.263927] ... value mask: 000000ffffffffff [ 0.263927] ... max period: 0000007fffffffff [ 0.263927] ... fixed-purpose events: 3 [ 0.263927] ... event mask: 0000000700000003 [ 0.263927] rcu: Hierarchical SRCU implementation. [ 0.264252] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.264377] smp: Bringing up secondary CPUs ... [ 0.264594] x86: Booting SMP configuration: [ 0.264596] .... node #0, CPUs: #1 #2 #3 [ 0.265262] smp: Brought up 1 node, 4 CPUs [ 0.265262] smpboot: Max logical packages: 1 [ 0.265262] smpboot: Total of 4 processors activated (19325.60 BogoMIPS) [ 0.266191] devtmpfs: initialized [ 0.267061] PM: Registering ACPI NVS region [mem 0x7513a000-0x7515bfff] (139264 bytes) [ 0.267066] PM: Registering ACPI NVS region [mem 0x78a6c000-0x78b6bfff] (1048576 bytes) [ 0.267191] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.267199] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.267324] pinctrl core: initialized pinctrl subsystem [ 0.267515] PM: RTC time: 19:06:07, date: 2020-09-14 [ 0.267519] thermal_sys: Registered thermal governor 'bang_bang' [ 0.267520] thermal_sys: Registered thermal governor 'step_wise' [ 0.267522] thermal_sys: Registered thermal governor 'user_space' [ 0.267693] NET: Registered protocol family 16 [ 0.268207] cpuidle: using governor ladder [ 0.268216] cpuidle: using governor menu [ 0.268470] ACPI: bus type PCI registered [ 0.268472] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.268539] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.268561] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.268576] PCI: Using configuration type 1 for base access [ 0.269000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.277026] gpio-f7188x: Not a Fintek device at 0x0000002e [ 0.277045] gpio-f7188x: Not a Fintek device at 0x0000004e [ 0.277179] ACPI: Added _OSI(Module Device) [ 0.277181] ACPI: Added _OSI(Processor Device) [ 0.277183] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.277185] ACPI: Added _OSI(Processor Aggregator Device) [ 0.277187] ACPI: Added _OSI(Linux-Dell-Video) [ 0.277189] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.277191] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.299285] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.306202] ACPI: Dynamic OEM Table Load: [ 0.306214] ACPI: SSDT 0xFFFF9453FA88E800 00015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.307822] ACPI: Dynamic OEM Table Load: [ 0.307831] ACPI: SSDT 0xFFFF9453FA87CD80 00008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.312298] ACPI: Interpreter enabled [ 0.312333] ACPI: (supports S0 S3 S5) [ 0.312336] ACPI: Using IOAPIC for interrupt routing [ 0.312414] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.313328] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.317222] ACPI: Power Resource [USBC] (on) [ 0.317570] ACPI: Power Resource [PC05] (on) [ 0.326298] ACPI: Power Resource [PLPE] (on) [ 0.326927] ACPI: Power Resource [PLPE] (on) [ 0.336346] ACPI: Power Resource [CLK0] (on) [ 0.336443] ACPI: Power Resource [CLK1] (on) [ 0.409451] ACPI: Power Resource [FN00] (off) [ 0.410825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.410838] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.831083] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.831090] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.831844] PCI host bridge to bus 0000:00 [ 0.831848] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.831852] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.831854] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.831857] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.831860] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.831862] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.831865] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.831867] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe window] [ 0.831870] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.831889] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.832117] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.832132] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 0.832143] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.832153] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057] [ 0.832377] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.832398] pci 0000:00:13.0: reg 0x10: [io 0x2048-0x204f] [ 0.832407] pci 0000:00:13.0: reg 0x14: [io 0x205c-0x205f] [ 0.832416] pci 0000:00:13.0: reg 0x18: [io 0x2040-0x2047] [ 0.832425] pci 0000:00:13.0: reg 0x1c: [io 0x2058-0x205b] [ 0.832434] pci 0000:00:13.0: reg 0x20: [io 0x2020-0x203f] [ 0.832443] pci 0000:00:13.0: reg 0x24: [mem 0x90914000-0x909147ff] [ 0.832492] pci 0000:00:13.0: PME# supported from D3hot [ 0.832679] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.832701] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit] [ 0.832762] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.832953] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.832983] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff] [ 0.832996] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff] [ 0.833099] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.833295] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.833320] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit] [ 0.833393] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.833577] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.833653] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.833846] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.833921] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.834113] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.834188] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.834386] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.834637] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.834680] pci 0000:00:1f.3: reg 0x10: [mem 0x90916000-0x9091601f] [ 0.834749] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f] [ 0.835106] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.835207] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000 [ 0.835266] pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x9067ffff 64bit] [ 0.835350] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.835484] pci 0000:02:00.0: supports D1 D2 [ 0.835486] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.835699] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.835706] pci 0000:00:1c.2: bridge window [mem 0x90600000-0x906fffff] [ 0.835790] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.835820] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] [ 0.835847] pci 0000:03:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit] [ 0.835865] pci 0000:03:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref] [ 0.835970] pci 0000:03:00.0: supports D1 D2 [ 0.835973] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.836144] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.836148] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.836152] pci 0000:00:1c.3: bridge window [mem 0x90500000-0x905fffff] [ 0.836158] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff 64bit pref] [ 0.836173] pci_bus 0000:00: on NUMA node 0 [ 0.837579] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.837792] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.838008] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.838224] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.838435] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.838646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.838857] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.839070] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.842971] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.842971] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.842971] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.842971] vgaarb: loaded [ 0.843244] SCSI subsystem initialized [ 0.843267] libata version 3.00 loaded. [ 0.843267] ACPI: bus type USB registered [ 0.843267] usbcore: registered new interface driver usbfs [ 0.843267] usbcore: registered new interface driver hub [ 0.843934] usbcore: registered new device driver usb [ 0.843934] Advanced Linux Sound Architecture Driver Initialized. [ 0.843934] PCI: Using ACPI for IRQ routing [ 0.844995] PCI: pci_cache_line_size set to 64 bytes [ 0.845048] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.845051] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 0.845053] e820: reserve RAM buffer [mem 0x7513a000-0x77ffffff] [ 0.845055] e820: reserve RAM buffer [mem 0x7846c000-0x7bffffff] [ 0.845057] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.846685] clocksource: Switched to clocksource tsc-early [ 0.871030] pnp: PnP ACPI init [ 0.871133] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.871285] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.871289] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.871292] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.871296] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.871306] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.872339] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.872343] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.872346] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.872350] system 00:02: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.872353] system 00:02: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.872356] system 00:02: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.872359] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.872363] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.872366] system 00:02: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.872375] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.875619] pnp: PnP ACPI: found 3 devices [ 0.880667] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.880773] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.880780] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.880785] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.880788] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.880792] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.880796] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.880810] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000] [ 0.880813] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000] [ 0.880821] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.880824] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.880832] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.880834] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.880840] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.880845] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff] [ 0.880854] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.880856] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.880861] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000] [ 0.880864] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000] [ 0.880871] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.880874] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.880878] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.880882] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.880893] pci 0000:02:00.0: BAR 6: assigned [mem 0x90680000-0x9068ffff pref] [ 0.880896] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.880900] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.880904] pci 0000:00:1c.2: bridge window [mem 0x90600000-0x906fffff] [ 0.880911] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.880915] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.880919] pci 0000:00:1c.3: bridge window [mem 0x90500000-0x905fffff] [ 0.880923] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff 64bit pref] [ 0.880936] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.880939] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.880942] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.880944] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.880947] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.880949] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.880952] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.880955] pci_bus 0000:00: resource 11 [mem 0x80000000-0x909ffffe window] [ 0.880958] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.880960] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.880963] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff] [ 0.880966] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.880968] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff] [ 0.880971] pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref] [ 0.881149] NET: Registered protocol family 2 [ 0.881379] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes, linear) [ 0.881405] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.881496] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.881759] TCP: Hash tables configured (established 32768 bind 32768) [ 0.881869] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear) [ 0.881982] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear) [ 0.882153] NET: Registered protocol family 1 [ 0.882185] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.882610] PCI: CLS 64 bytes, default 64 [ 0.882693] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.882696] software IO TLB: mapped [mem 0x7113a000-0x7513a000] (64MB) [ 0.883326] kvm: already loaded the other module [ 0.883331] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22d226b40b0, max_idle_ns: 440795220115 ns [ 0.883356] clocksource: Switched to clocksource tsc [ 0.883997] check: Scanning for low memory corruption every 60 seconds [ 0.884576] Initialise system trusted keyrings [ 0.884669] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.888372] Key type asymmetric registered [ 0.888375] Asymmetric key parser 'x509' registered [ 0.888392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.888470] io scheduler mq-deadline registered [ 0.888472] io scheduler kyber registered [ 0.889666] vmlfb: initializing [ 0.889705] intel_idle: MWAIT substates: 0x33000020 [ 0.889708] intel_idle: v0.4.1 model 0x37 [ 0.890080] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.890283] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.890350] ACPI: Power Button [PWRB] [ 0.890416] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.890450] ACPI: Sleep Button [SLPB] [ 0.890523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.890574] ACPI: Power Button [PWRF] [ 0.895636] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.895638] ACPI: Thermal Zone [TZ01] (28 C) [ 0.896749] hpet: number irqs doesn't agree with number of timers [ 0.897060] Non-volatile memory driver v1.3 [ 0.897571] Linux agpgart interface v0.103 [ 0.898625] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.898627] [drm] Driver supports precise vblank timestamp query. [ 0.900556] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.912685] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 0.914646] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 0.915093] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input3 [ 0.915566] usbcore: registered new interface driver udl [ 0.918811] loop: module loaded [ 0.923930] drbd: initialized. Version: 8.4.11 (api:1/proto:86-101) [ 0.923948] drbd: built-in [ 0.923950] drbd: registered as block device major 147 [ 0.924119] lkdtm: No crash points registered, enable through debugfs [ 0.926913] ahci 0000:00:13.0: version 3.0 [ 0.927151] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 0.927234] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 0.927239] ahci 0000:00:13.0: flags: 64bit ncq led clo pio slum part deso [ 0.928114] scsi host0: ahci [ 0.928609] scsi host1: ahci [ 0.928720] ata1: SATA max UDMA/133 abar m2048@0x90914000 port 0x90914100 irq 91 [ 0.928722] ata2: DUMMY [ 0.929171] mdio_bus fixed-0: GPIO lookup for consumer reset [ 0.929174] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 0.929177] mdio_bus fixed-0: No GPIO consumer reset found [ 0.929185] libphy: Fixed MDIO Bus: probed [ 0.929186] sky2: driver version 1.30 [ 0.929208] PPP generic driver version 2.4.2 [ 0.929562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.929568] ehci-pci: EHCI PCI platform driver [ 0.929586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.929591] ohci-pci: OHCI PCI platform driver [ 0.929607] uhci_hcd: USB Universal Host Controller Interface driver [ 0.929903] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.930437] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.931517] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.931523] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.931753] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 0.931756] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.931759] usb usb1: Product: xHCI Host Controller [ 0.931761] usb usb1: Manufacturer: Linux 5.4.25+ xhci-hcd [ 0.931763] usb usb1: SerialNumber: ... [ 0.932554] hub 1-0:1.0: USB hub found [ 0.932570] hub 1-0:1.0: 6 ports detected [ 0.933581] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.933776] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.933783] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.933855] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 0.933858] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.933860] usb usb2: Product: xHCI Host Controller [ 0.933862] usb usb2: Manufacturer: Linux 5.4.25+ xhci-hcd [ 0.933865] usb usb2: SerialNumber: ... [ 0.934124] hub 2-0:1.0: USB hub found [ 0.934138] hub 2-0:1.0: 1 port detected [ 0.934423] usbcore: registered new interface driver cdc_acm [ 0.934424] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.934452] usbcore: registered new interface driver usb-storage [ 0.934472] usbcore: registered new interface driver ums-realtek [ 0.934508] usbcore: registered new interface driver usbserial_generic [ 0.934517] usbserial: USB Serial support registered for generic [ 0.934552] i8042: PNP: No PS/2 controller found. [ 0.935035] rtc_cmos 00:00: RTC can wake from S4 [ 0.935407] rtc_cmos 00:00: registered as rtc0 [ 0.935410] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 0.935708] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.942503] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 0.949666] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 0.949744] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 0.950746] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.950762] iTCO_vendor_support: vendor-support=0 [ 0.951530] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 0.951732] device-mapper: verity-chromeos: dm-verity-chromeos registered [ 0.951739] intel_pstate: Intel P-state driver initializing [ 0.952545] sdhci: Secure Digital Host Controller Interface driver [ 0.952548] sdhci: Copyright(c) Pierre Ossman [ 0.953239] ledtrig-cpu: registered to indicate activity on CPUs [ 0.953301] hidraw: raw HID events driver (C) Jiri Kosina [ 0.953574] usbcore: registered new interface driver usbhid [ 0.953576] usbhid: USB HID core driver [ 0.953759] ashmem: initialized [ 0.954442] intel_rapl_common: Found RAPL domain package [ 0.954446] intel_rapl_common: Found RAPL domain core [ 0.957059] Initializing XFRM netlink socket [ 0.957693] NET: Registered protocol family 10 [ 0.958918] Segment Routing with IPv6 [ 0.958998] NET: Registered protocol family 17 [ 0.961427] microcode: sig=0x30678, pf=0x4, revision=0x836 [ 0.961841] microcode: Microcode Update Driver: v2.2. [ 0.961848] IPI shorthand broadcast: enabled [ 0.961884] sched_clock: Marking stable (960611495, 1210156)->(975710816, -13889165) [ 0.962119] registered taskstats version 1 [ 0.962122] Loading compiled-in X.509 certificates [ 0.965127] Loaded X.509 cert 'Neverware: autogenerated kernel key: 1b5ae8e90d05aa3d9a41a852b3f86f8ecf736f12' [ 0.965173] Key type ._fscrypt registered [ 0.965175] Key type .fscrypt registered [ 0.966128] PM: Magic number: 4:152:142 [ 0.966224] acpi device:13: hash matches [ 0.966588] device-mapper: init: waiting for all devices to be available before creating mapped devices [ 1.236711] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.238839] ata1.00: ATA-8: ST500DM002-1BD142, KC47, max UDMA/133 [ 1.238845] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32) [ 1.241525] ata1.00: configured for UDMA/133 [ 1.242336] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC47 PQ: 0 ANSI: 5 [ 1.243923] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.243952] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.243999] sd 0:0:0:0: [sda] Write Protect is off [ 1.244006] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.244181] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.256301] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 1.275171] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37 [ 1.275177] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.275182] usb 1-4: Product: USB2.0 Hub [ 1.277841] hub 1-4:1.0: USB hub found [ 1.278852] hub 1-4:1.0: 4 ports detected [ 1.281123] usb: port power management may be unreliable [ 1.284715] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 [ 1.290659] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.291332] device-mapper: verity: sha256 using implementation "sha256-generic" [ 1.291707] device-mapper: ioctl: dm-0 (vroot) is ready [ 1.291949] ALSA device list: [ 1.291954] No soundcards found. [ 1.291979] Warning: unable to open an initial console. [ 1.334320] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem [ 1.351885] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) [ 1.351925] VFS: Mounted root (ext2 filesystem) readonly on device 254:0. [ 1.380026] devtmpfs: mounted [ 1.398452] Freeing unused kernel image memory: 1624K [ 1.398999] Write protecting the kernel read-only data: 18432k [ 1.401421] Freeing unused kernel image memory: 1988K [ 1.402969] Freeing unused kernel image memory: 516K [ 1.403763] Run /sbin/init as init process [ 1.562105] usb 1-4.1: new high-speed USB device number 3 using xhci_hcd [ 1.590606] usb 1-4.1: New USB device found, idVendor=0bda, idProduct=0158, bcdDevice=58.88 [ 1.590613] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.590617] usb 1-4.1: Product: USB2.0-CRW [ 1.590621] usb 1-4.1: Manufacturer: Generic [ 1.590625] usb 1-4.1: SerialNumber: ... [ 1.599879] ums-realtek 1-4.1:1.0: USB Mass Storage device detected [ 1.609119] scsi host2: usb-storage 1-4.1:1.0 [ 1.677280] usb 1-4.2: new full-speed USB device number 4 using xhci_hcd [ 1.758351] usb 1-4.2: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 1.758358] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.644965] usb 1-4.3: new low-speed USB device number 5 using xhci_hcd [ 2.665490] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 2.680345] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 2.730757] usb 1-4.3: New USB device found, idVendor=1a2c, idProduct=0b2a, bcdDevice= 1.10 [ 2.730764] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.730768] usb 1-4.3: Product: USB Keyboard [ 2.730772] usb 1-4.3: Manufacturer: SEM [ 2.738506] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/0003:1A2C:0B2A.0001/input/input4 [ 2.791436] hid-generic 0003:1A2C:0B2A.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-4.3/input0 [ 2.794280] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.1/0003:1A2C:0B2A.0002/input/input5 [ 2.794478] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.1/0003:1A2C:0B2A.0002/input/input6 [ 2.794761] hid-generic 0003:1A2C:0B2A.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-4.3/input1 [ 4.514756] udevd[141]: starting version 225 [ 4.612286] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 5.974721] usb 1-4.4: new low-speed USB device number 6 using xhci_hcd [ 6.056147] usb 1-4.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00 [ 6.056154] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.056158] usb 1-4.4: Product: USB OPTICAL MOUSE [ 6.056162] usb 1-4.4: Manufacturer: PIXART [ 6.062894] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:093A:2510.0003/input/input7 [ 6.063499] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-4.4/input0 [ 6.724566] LoadPin: dm-0 (254:0): read-only [ 6.724570] LoadPin: load pinning engaged. [ 6.724596] LoadPin: kernel-module pinned obj="/lib/modules/5.4.25+/kernel/drivers/input/joydev.ko" pid=187 cmdline="udevd --daemon" [ 7.458557] EXT4-fs (sda16): recovery complete [ 7.460177] frecon[277]: Frecon using drm driver i915, version 1.6, date(20190822), desc(Intel Graphics) using atomic [ 7.494138] frecon[277]: tsm_screen: new screen [ 7.494177] frecon[277]: tsm_vte: new vte object [ 7.498044] EXT4-fs (sda16): mounted filesystem with ordered data mode. Opts: commit=600 [ 7.502754] frecon[277]: tsm_screen: new screen [ 7.502782] frecon[277]: tsm_vte: new vte object [ 7.510145] frecon[277]: tsm_screen: new screen [ 7.510179] frecon[277]: tsm_vte: new vte object [ 7.516631] frecon[277]: tsm_screen: new screen [ 7.516658] frecon[277]: tsm_vte: new vte object [ 7.555319] libpng warning: iCCP: known incorrect sRGB profile [ 7.585736] EXT4-fs (sda23): recovery complete [ 7.598020] EXT4-fs (sda23): mounted filesystem with ordered data mode. Opts: (null) [ 8.554267] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,commit=600 [ 8.594816] EXT4-fs (dm-1): resizing filesystem from 4096 to 35424248 blocks [ 10.596702] EXT4-fs (dm-1): resized filesystem to 35424248 [ 11.444091] EXT4-fs (sda16): re-mounted. Opts: resgid=20119,commit=600 [ 11.733017] low_mem: threshold[0] 306 MB [ 11.733022] low_mem: threshold[1] 1533 MB [ 11.926080] zram: Added device: zram0 [ 12.213141] zram0: detected capacity change from 0 to 5890465792 [ 12.296241] Adding 5752404k swap on /dev/zram0. Priority:-2 extents:1 across:5752404k SS [ 12.385760] systemd-journald[526]: Running without systemd. [ 12.435253] systemd-journald[526]: Received request to flush runtime journal from PID 562 [ 13.400305] frecon[277]: DBUS connected after 5.8 seconds [ 13.469532] frecon[277]: drmModeDirtyFB failed: Permission denied [ 13.488679] frecon[277]: drmModeDirtyFB failed: Permission denied [ 13.511188] frecon[277]: drmModeDirtyFB failed: Permission denied [ 13.823007] neverware_client_id: starting service [ 14.590133] neverware_client_id: reading client_id from /usr/share/oem/client_id [ 14.618130] neverware_client_id: read client_id XX:XX:XX:XX:XX:XX [ 14.618293] neverware_client_id: client_id valid [ 14.618377] neverware_client_id: reading client_id from /usr/share/oem/client_id [ 14.618492] neverware_client_id: read client_id XX:XX:XX:XX:XX:XX [ 14.618595] neverware_client_id: client_id valid [ 14.618666] neverware_client_id: copying /usr/share/oem/client_id to /run/neverware_client_id [ 14.840140] init: tcsd main process (660) terminated with status 137 [ 14.840174] init: tcsd main process ended, respawning [ 15.439440] neverware_client_id: reading client_id from /run/neverware_client_id [ 15.439531] neverware_client_id: read client_id XX:XX:XX:XX:XX:XX [ 15.439591] neverware_client_id: reading client_id from /run/neverware_client_id [ 15.439662] neverware_client_id: read client_id XX:XX:XX:XX:XX:XX [ 17.125571] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 17.126125] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 17.286710] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 44.925400] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 45.005334] input: Dell AIO WMI hotkeys as /devices/virtual/input/input9 [ 45.054967] Bluetooth: af_bluetooth.c:bt_init() Core ver 2.22 [ 45.055001] NET: Registered protocol family 31 [ 45.055003] Bluetooth: af_bluetooth.c:bt_init() HCI device and connection manager initialized [ 45.055011] Bluetooth: hci_sock.c:hci_sock_init() HCI socket layer initialized [ 45.055014] Bluetooth: l2cap_sock.c:l2cap_init_sockets() L2CAP socket layer initialized [ 45.055022] Bluetooth: sco.c:sco_init() SCO socket layer initialized [ 45.146281] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 45.151443] mdio_bus r8169-300: GPIO lookup for consumer reset [ 45.151448] mdio_bus r8169-300: using lookup tables for GPIO lookup [ 45.151450] mdio_bus r8169-300: No GPIO consumer reset found [ 45.154184] mdio_bus r8169-300:00: GPIO lookup for consumer reset [ 45.154188] mdio_bus r8169-300:00: using lookup tables for GPIO lookup [ 45.154192] mdio_bus r8169-300:00: No GPIO consumer reset found [ 45.154332] libphy: r8169: probed [ 45.154715] r8169 0000:03:00.0 eth0: RTL8168g/8111g, XX:XX:XX:XX:XX:XX, XID 4c0, IRQ 94 [ 45.154720] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 45.308870] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3) [ 45.530445] Bluetooth: hci_ldisc.c:hci_uart_init() HCI UART driver ver 2.3 [ 45.530451] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol H4 registered [ 45.530453] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol BCSP registered [ 45.530485] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol LL registered [ 45.530487] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol ATH3K registered [ 45.530514] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol Three-wire (H5) registered [ 45.530565] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol Intel registered [ 45.530631] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol Broadcom registered [ 45.530653] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol QCA registered [ 45.530655] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol AG6XX registered [ 45.530691] Bluetooth: hci_ldisc.c:hci_uart_register_proto() HCI UART protocol Marvell registered [ 45.630673] usbcore: registered new interface driver btusb [ 45.813294] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffffa4c95310) [ 45.901019] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 45.928818] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 45.928823] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 45.928826] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 45.928828] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 45.928830] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 45.928833] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19 [ 45.928836] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18 [ 45.928838] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 45.930015] usbcore: registered new interface driver ath3k [ 45.932559] ath: phy0: WB335 1-ANT card detected [ 45.932562] ath: phy0: Set BT/WLAN RX diversity capability [ 45.941891] ath: phy0: Enable LNA combining [ 45.945387] ath: phy0: ASPM enabled: 0x43 [ 45.945391] ath: EEPROM regdomain: 0x60 [ 45.945393] ath: EEPROM indicates we should expect a direct regpair map [ 45.945396] ath: Country alpha2 being used: 00 [ 45.945397] ath: Regpair used: 0x60 [ 46.004130] r8169 0000:03:00.0 eth0: Link is Down [ 46.008059] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 46.008480] usb 1-4.2: USB disconnect, device number 4 [ 46.008676] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffae1942580000, irq=16 [ 46.015567] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 46.016439] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 46.020436] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 46.020560] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 46.020667] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 46.020760] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 46.182961] usb 1-4.2: new full-speed USB device number 7 using xhci_hcd [ 46.255791] udevd[1153]: Process '/usr/sbin/iw dev wlan0 set power_save on' failed with exit code 161. [ 46.260176] usb 1-4.2: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 46.260183] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 46.267728] usb 1-4.2: GPIO lookup for consumer reset [ 46.267734] usb 1-4.2: using ACPI for GPIO lookup [ 46.267741] acpi device:11: GPIO: looking up reset-gpios [ 46.267746] acpi device:11: GPIO: looking up reset-gpio [ 46.267750] usb 1-4.2: using lookup tables for GPIO lookup [ 46.267755] usb 1-4.2: No GPIO consumer reset found [ 46.302015] udevd[1144]: Process '/usr/sbin/alsactl restore 0' failed with exit code 99. [ 47.411530] EXT4-fs (sda16): re-mounted. Opts: resgid=20119,commit=600 [ 47.537956] fuse: init (API version 7.31) [ 47.679262] init: conntrackd pre-start process (1356) terminated with status 1 [ 47.698855] vboxdrv: loading out-of-tree module taints kernel. [ 47.722911] vboxdrv: Found 4 processor cores [ 47.747417] init: conntrackd post-stop process (1464) terminated with status 3 [ 47.750214] vboxdrv: TSC mode is Invariant, tentative frequency 2415700068 Hz [ 47.750217] vboxdrv: Successfully loaded version 5.2.36 (interface 0x00290001) [ 47.774727] VBoxNetFlt: Successfully started. [ 47.800055] VBoxNetAdp: Successfully started. [ 47.827415] EXT4-fs (sda16): re-mounted. Opts: resgid=20119,commit=600 [ 48.407575] i2c /dev entries driver [ 49.273756] Bluetooth: tty.c:rfcomm_init_ttys() RFCOMM TTY layer initialized [ 49.273772] Bluetooth: sock.c:rfcomm_init_sockets() RFCOMM socket layer initialized [ 49.273790] Bluetooth: core.c:rfcomm_init() RFCOMM ver 1.11 [ 124.615920] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 124.634190] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 124.636720] wlan0: authenticated [ 124.638117] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 124.642348] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [ 124.642519] wlan0: associated [ 124.707218] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 163.798487] MountThread (pid 1016) is setting deprecated v1 encryption policy; recommend upgrading to v2. [ 163.817590] fscrypt: AES-256-CTS-CBC using implementation "cts(cbc(aes-generic))" [ 163.861596] cryptd: max_cpu_qlen set to 1000 [ 163.934188] fscrypt: AES-256-XTS using implementation "xts(ecb(aes-generic))" [ 193.451865] neverware_client_id: reading client_id from /run/neverware_client_id [ 193.452107] neverware_client_id: read client_id XX:XX:XX:XX:XX:XX [ 245.720904] debugfs: File 'le_min_key_size' in directory 'hci0' already present! [ 245.720912] debugfs: File 'le_max_key_size' in directory 'hci0' already present! [ 245.720916] debugfs: File 'force_bredr_smp' in directory 'hci0' already present! [ 339.319322] device-mapper: verity: sha256 using implementation "sha256-generic" [ 339.361613] EXT4-fs (dm-2): mounted filesystem without journal. Opts: [ 342.349619] NET: Registered protocol family 40 [ 343.047061] tun: Universal TUN/TAP device driver, 1.6 [ 513.387945] debugfs: File 'le_min_key_size' in directory 'hci0' already present! [ 513.388000] debugfs: File 'le_max_key_size' in directory 'hci0' already present! [ 513.388009] debugfs: File 'force_bredr_smp' in directory 'hci0' already present! [ 612.327001] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 612.343087] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 612.346296] wlan0: authenticated [ 612.347065] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 612.606010] wlan0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [ 612.822015] wlan0: associate with XX:XX:XX:XX:XX:XX (try 3/3) [ 612.933989] wlan0: association with XX:XX:XX:XX:XX:XX timed out [ 618.653738] usb 1-4.2: USB disconnect, device number 7 [ 618.938000] usb 1-4.2: new full-speed USB device number 8 using xhci_hcd [ 619.016220] usb 1-4.2: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 619.016227] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 619.421927] usb 1-4.2: USB disconnect, device number 8 [ 619.596997] usb 1-4.2: new full-speed USB device number 9 using xhci_hcd [ 619.674482] usb 1-4.2: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 619.674489] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 619.682433] usb 1-4.2: GPIO lookup for consumer reset [ 619.682439] usb 1-4.2: using ACPI for GPIO lookup [ 619.682446] acpi device:11: GPIO: looking up reset-gpios [ 619.682451] acpi device:11: GPIO: looking up reset-gpio [ 619.682456] usb 1-4.2: using lookup tables for GPIO lookup [ 619.682460] usb 1-4.2: No GPIO consumer reset found [ 628.718215] wlan0: authenticate with XX:XX:XX:XX:XX:XX [ 628.733819] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 628.735938] wlan0: authenticated [ 633.615885] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 633.619961] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [ 633.620129] wlan0: associated [ 634.020052] usb 1-4.2: USB disconnect, device number 9 [ 634.020305] Bluetooth: hci_request.c:start_discov_update() Failed to start discovery: status 0x1f [ 634.308992] usb 1-4.2: new full-speed USB device number 10 using xhci_hcd [ 634.386237] usb 1-4.2: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 634.386242] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 634.532024] usb 1-4.2: USB disconnect, device number 10 [ 634.705989] usb 1-4.2: new full-speed USB device number 11 using xhci_hcd [ 634.783404] usb 1-4.2: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 634.783410] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 634.790872] usb 1-4.2: GPIO lookup for consumer reset [ 634.790878] usb 1-4.2: using ACPI for GPIO lookup [ 634.790884] acpi device:11: GPIO: looking up reset-gpios [ 634.790889] acpi device:11: GPIO: looking up reset-gpio [ 634.790893] usb 1-4.2: using lookup tables for GPIO lookup [ 634.790897] usb 1-4.2: No GPIO consumer reset found [ 785.873215] ata1.00: exception Emask 0x10 SAct 0xf00000 SErr 0x4040000 action 0xe frozen [ 785.873221] ata1.00: irq_stat 0x00000040, connection status changed [ 785.873226] ata1: SError: { CommWake DevExch } [ 785.873232] ata1.00: failed command: WRITE FPDMA QUEUED [ 785.873244] ata1.00: cmd 61/40:a0:10:c1:64/05:00:15:00:00/40 tag 20 ncq dma 688128 out res 40/00:98:a0:07:9d/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 785.873248] ata1.00: status: { DRDY } [ 785.873252] ata1.00: failed command: WRITE FPDMA QUEUED [ 785.873263] ata1.00: cmd 61/c0:a8:50:c6:64/02:00:15:00:00/40 tag 21 ncq dma 360448 out res 40/00:98:a0:07:9d/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 785.873266] ata1.00: status: { DRDY } [ 785.873270] ata1.00: failed command: WRITE FPDMA QUEUED [ 785.873281] ata1.00: cmd 61/40:b0:10:c9:64/05:00:15:00:00/40 tag 22 ncq dma 688128 out res 40/00:98:a0:07:9d/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 785.873284] ata1.00: status: { DRDY } [ 785.873288] ata1.00: failed command: WRITE FPDMA QUEUED [ 785.873299] ata1.00: cmd 61/c0:b8:50:ce:64/02:00:15:00:00/40 tag 23 ncq dma 360448 out res 40/00:98:a0:07:9d/00:00:00:00:00/40 Emask 0x10 (ATA bus error) [ 785.873302] ata1.00: status: { DRDY } [ 785.873310] ata1: hard resetting link [ 789.087164] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 789.089942] ata1.00: configured for UDMA/133 [ 789.091022] ata1: EH complete [ 1638.606032] usb 1-1: new high-speed USB device number 12 using xhci_hcd [ 1638.618427] usb 1-1: New USB device found, idVendor=0bda, idProduct=f179, bcdDevice= 0.00 [ 1638.618434] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1638.618438] usb 1-1: Product: 802.11n [ 1638.618442] usb 1-1: Manufacturer: Realtek [ 1638.618445] usb 1-1: SerialNumber: ... [ 2688.614745] perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79000