[ 0.000000] Linux version 5.3.0-19-generic (XXX@XXX) (gcc version 8.3.0 (Debian 8.3.0-6endless1bem1)) #20+dev112.9019cf8beos3.7.2 SMP Tue Oct 29 23:29:49 UTC 2019 (Ubuntu 5.3.0-19.20+dev112.9019cf8beos3.7.2-generic 5.3.1) [ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos2)/boot/ostree/eos-HASH_08E-8B3D-0F6D-BBE9-9D1704B139AD/vmlinuz-5.3.0-19-generic root=UUID=HASH_C0C-D336-650C-80B4-5E7332B227F4 rw splash plymouth.ignore-serial-consoles quiet loglevel=0 ostree=/ostree/boot.0/eos/HASH_08E-8B3D-0F6D-BBE9-9D1704B139AD/0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f493fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f494000-0x000000007f573fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f574000-0x000000007f5befff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f5bf000-0x000000007f5ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f5ec000-0x000000007f5fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f5ff000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LG Electronics X140-A.BG11P1/UL2, BIOS UL2F3F73 06/03/2010 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1829.001 MHz processor [ 0.004344] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.004349] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.004366] last_pfn = 0x7f494 max_arch_pfn = 0x400000000 [ 0.004376] MTRR default type: uncachable [ 0.004378] MTRR fixed ranges enabled: [ 0.004382] 00000-9FFFF write-back [ 0.004385] A0000-BFFFF uncachable [ 0.004389] C0000-DFFFF write-through [ 0.004392] E0000-FFFFF write-protect [ 0.004395] MTRR variable ranges enabled: [ 0.004399] 0 base 0FFF00000 mask 0FFF00000 write-protect [ 0.004403] 1 base 000000000 mask 0C0000000 write-back [ 0.004407] 2 base 040000000 mask 0C0000000 write-back [ 0.004410] 3 base 07F800000 mask 0FF800000 uncachable [ 0.004413] 4 disabled [ 0.004415] 5 disabled [ 0.004417] 6 disabled [ 0.004602] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.014824] check: Scanning 1 areas for low memory corruption [ 0.014842] BRK [0x20001000, 0x20001fff] PGTABLE [ 0.014847] BRK [0x20002000, 0x20002fff] PGTABLE [ 0.014851] BRK [0x20003000, 0x20003fff] PGTABLE [ 0.014944] BRK [0x20004000, 0x20004fff] PGTABLE [ 0.014948] BRK [0x20005000, 0x20005fff] PGTABLE [ 0.015216] BRK [0x20006000, 0x20006fff] PGTABLE [ 0.015357] RAMDISK: [mem 0x32cc9000-0x3565bfff] [ 0.015376] ACPI: Early table checksum verification disabled [ 0.015389] ACPI: RSDP 0x00000000000FE020 000024 (v02 LGE ) [ 0.015398] ACPI: XSDT 0x000000007F5FE120 00005C (v01 LGE LGPC 00000001 01000013) [ 0.015414] ACPI: FACP 0x000000007F5FD000 0000F4 (v04 LGE LGPC 00000001 MSFT 01000013) [ 0.015431] ACPI: DSDT 0x000000007F5F0000 00920D (v01 LGE LGPC 00000001 MSFT 01000013) [ 0.015442] ACPI: FACS 0x000000007F582000 000040 [ 0.015450] ACPI: FACS 0x000000007F582000 000040 [ 0.015459] ACPI: HPET 0x000000007F5FC000 000038 (v01 LGE LGPC 00000001 MSFT 01000013) [ 0.015470] ACPI: APIC 0x000000007F5FB000 000078 (v02 LGE LGPC 00000001 MSFT 01000013) [ 0.015480] ACPI: MCFG 0x000000007F5FA000 00003C (v01 LGE LGPC 00000001 MSFT 01000013) [ 0.015491] ACPI: SLIC 0x000000007F5EF000 000176 (v01 LGE LGPC 00000001 MSFT 01000013) [ 0.015502] ACPI: BOOT 0x000000007F5EE000 000028 (v01 LGE LGPC 00000001 MSFT 01000013) [ 0.015512] ACPI: SSDT 0x000000007F5EC000 0004C4 (v02 LGE LGPC 00003000 INTL 20051117) [ 0.015539] ACPI: Local APIC address 0xfee00000 [ 0.015960] No NUMA configuration found [ 0.015963] Faking a node at [mem 0x0000000000000000-0x000000007f493fff] [ 0.016015] NODE_DATA(0) allocated [mem 0x7f469000-0x7f493fff] [ 0.017159] Zone ranges: [ 0.017163] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.017167] DMA32 [mem 0x0000000001000000-0x000000007f493fff] [ 0.017171] Normal empty [ 0.017174] Device empty [ 0.017176] Movable zone start for each node [ 0.017183] Early memory node ranges [ 0.017186] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.017189] node 0: [mem 0x0000000000100000-0x000000007f493fff] [ 0.017197] Zeroed struct page in unavailable ranges: 98 pages [ 0.017200] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f493fff] [ 0.017204] On node 0 totalpages: 521266 [ 0.017208] DMA zone: 64 pages used for memmap [ 0.017210] DMA zone: 21 pages reserved [ 0.017213] DMA zone: 3998 pages, LIFO batch:0 [ 0.017414] DMA32 zone: 8083 pages used for memmap [ 0.017417] DMA32 zone: 517268 pages, LIFO batch:63 [ 0.043113] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff] [ 0.043334] ACPI: PM-Timer IO Port: 0x408 [ 0.043340] ACPI: Local APIC address 0xfee00000 [ 0.043363] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.043367] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.043390] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.043397] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.043402] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.043407] ACPI: IRQ0 used by override. [ 0.043410] ACPI: IRQ9 used by override. [ 0.043417] Using ACPI (MADT) for SMP configuration information [ 0.043421] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.043437] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.043489] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.043495] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.043497] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.043500] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.043506] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.043509] Booting paravirtualized kernel on bare hardware [ 0.043518] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.043541] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.047189] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u524288 [ 0.047212] pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152 [ 0.047215] pcpu-alloc: [0] 0 1 2 3 [ 0.047320] Built 1 zonelists, mobility grouping on. Total pages: 513098 [ 0.047323] Policy zone: DMA32 [ 0.047330] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/boot/ostree/eos-HASH_08E-8B3D-0F6D-BBE9-9D1704B139AD/vmlinuz-5.3.0-19-generic root=UUID=HASH_C0C-D336-650C-80B4-5E7332B227F4 rw splash plymouth.ignore-serial-consoles quiet loglevel=0 ostree=/ostree/boot.0/eos/HASH_08E-8B3D-0F6D-BBE9-9D1704B139AD/0 [ 0.049622] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.050616] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.050730] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.050738] Calgary: detecting Calgary via BIOS EBDA area [ 0.050747] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.089717] Memory: 1970992K/2085064K available (14339K kernel code, 2359K rwdata, 4780K rodata, 2652K init, 5100K bss, 114072K reserved, 0K cma-reserved) [ 0.089737] random: get_random_u64 called from __kmem_cache_create+0x42/0x520 with crng_init=0 [ 0.090327] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.090377] ftrace: allocating 42874 entries in 168 pages [ 0.136100] rcu: Hierarchical RCU implementation. [ 0.136107] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.136109] Tasks RCU enabled. [ 0.136112] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.136114] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.150085] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.153402] Console: colour VGA+ 80x25 [ 0.153411] printk: console [tty0] enabled [ 0.153480] ACPI: Core revision 20190703 [ 0.153806] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.153835] APIC: Switch to symmetric I/O mode setup [ 0.154506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.173838] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1a5d2dc35a0, max_idle_ns: 440795236176 ns [ 0.173849] Calibrating delay loop (skipped), value calculated using timer frequency.. 3658.00 BogoMIPS (lpj=7316004) [ 0.173856] pid_max: default: 32768 minimum: 301 [ 0.173992] LSM: Security Framework initializing [ 0.174031] Yama: becoming mindful. [ 0.174126] AppArmor: AppArmor initialized [ 0.174249] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.174267] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.174775] *** VALIDATE proc *** [ 0.174975] *** VALIDATE cgroup1 *** [ 0.174980] *** VALIDATE cgroup2 *** [ 0.175080] Disabled fast string operations [ 0.175124] mce: CPU0: Thermal monitoring enabled (TM2) [ 0.175130] process: using mwait in idle threads [ 0.175139] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0 [ 0.175142] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0 [ 0.175405] Freeing SMP alternatives memory: 36K [ 0.287304] smpboot: CPU0: Intel(R) Atom(TM) CPU N470 @ 1.83GHz (family: 0x6, model: 0x1c, stepping: 0xa) [ 0.287812] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver. [ 0.287827] ... version: 3 [ 0.287830] ... bit width: 40 [ 0.287831] ... generic registers: 2 [ 0.287834] ... value mask: 000000ffffffffff [ 0.287836] ... max period: 000000007fffffff [ 0.287837] ... fixed-purpose events: 3 [ 0.287839] ... event mask: 0000000700000003 [ 0.288032] rcu: Hierarchical SRCU implementation. [ 0.289842] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.289842] smp: Bringing up secondary CPUs ... [ 0.289842] x86: Booting SMP configuration: [ 0.289842] .... node #0, CPUs: #1 [ 0.007349] Disabled fast string operations [ 0.294055] smp: Brought up 1 node, 2 CPUs [ 0.294055] smpboot: Max logical packages: 2 [ 0.294055] smpboot: Total of 2 processors activated (7316.00 BogoMIPS) [ 0.294721] devtmpfs: initialized [ 0.294721] x86/mm: Memory block size: 128MB [ 0.297868] PM: Registering ACPI NVS region [mem 0x7f574000-0x7f5befff] (307200 bytes) [ 0.298095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.298095] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.298187] pinctrl core: initialized pinctrl subsystem [ 0.298187] PM: RTC time: 13:27:09, date: 2019-11-28 [ 0.298578] NET: Registered protocol family 16 [ 0.299061] EISA bus registered [ 0.299061] cpuidle: using governor ladder [ 0.299061] cpuidle: using governor menu [ 0.299061] Simple Boot Flag at 0x44 set to 0x1 [ 0.299061] ACPI: bus type PCI registered [ 0.299061] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.299061] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.299061] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.299096] PCI: Using configuration type 1 for base access [ 0.306621] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.318276] ACPI: Added _OSI(Module Device) [ 0.318279] ACPI: Added _OSI(Processor Device) [ 0.318281] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.318284] ACPI: Added _OSI(Processor Aggregator Device) [ 0.318289] ACPI: Added _OSI(Linux-Dell-Video) [ 0.318292] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.318294] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.346324] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.349478] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.351308] ACPI: Dynamic OEM Table Load: [ 0.351324] ACPI: SSDT 0xFFFF8B793C15F800 0001F7 (v02 LGE LGPC 00003000 INTL 20051117) [ 0.353747] ACPI: Dynamic OEM Table Load: [ 0.353761] ACPI: SSDT 0xFFFF8B793C15E400 0001C1 (v02 LGE LGPC 00003001 INTL 20051117) [ 0.356862] ACPI: Dynamic OEM Table Load: [ 0.356877] ACPI: SSDT 0xFFFF8B793CAA7600 0000D0 (v02 LGE LGPC 00003000 INTL 20051117) [ 0.358575] ACPI: Dynamic OEM Table Load: [ 0.358575] ACPI: SSDT 0xFFFF8B793C0D8300 000083 (v02 LGE LGPC 00003000 INTL 20051117) [ 0.360952] ACPI: EC: EC started [ 0.360955] ACPI: EC: interrupt blocked [ 0.372989] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC [ 0.372997] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.373002] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions [ 0.373003] ACPI: Interpreter enabled [ 0.373112] ACPI: (supports S0 S3 S4 S5) [ 0.373116] ACPI: Using IOAPIC for interrupt routing [ 0.373250] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.374085] ACPI: Enabled 7 GPEs in block 00 to 1F [ 0.401387] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.401409] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.401738] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20190703/dsfield-183) [ 0.401760] Initialized Local Variables for Method [_OSC]: [ 0.401763] Local0: (____ptrval____) <Obj> Integer 0000000000000002 [ 0.401773] Local1: (____ptrval____) <Obj> Integer 0000000000000001 [ 0.401780] Local2: (____ptrval____) <Obj> Integer 0000000000000004 [ 0.401790] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation) [ 0.401791] Arg0: (____ptrval____) <Obj> Buffer(16) 5B 4D DB 33 F7 1F 1C 40 [ 0.401806] Arg1: (____ptrval____) <Obj> Integer 0000000000000001 [ 0.401813] Arg2: (____ptrval____) <Obj> Integer 0000000000000003 [ 0.401820] Arg3: (____ptrval____) <Obj> Buffer(12) 01 00 00 00 1F 01 00 00 [ 0.401854] ACPI Error: Aborting method \_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20190703/psparse-531) [ 0.401886] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM [ 0.404488] PCI host bridge to bus 0000:00 [ 0.404497] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.404501] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.404506] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.404510] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] [ 0.404515] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.404545] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000 [ 0.404831] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000 [ 0.404848] pci 0000:00:02.0: reg 0x10: [mem 0x94180000-0x941fffff] [ 0.404856] pci 0000:00:02.0: reg 0x14: [io 0x30c0-0x30c7] [ 0.404864] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.404871] pci 0000:00:02.0: reg 0x1c: [mem 0x94000000-0x940fffff] [ 0.405198] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000 [ 0.405215] pci 0000:00:02.1: reg 0x10: [mem 0x94100000-0x9417ffff] [ 0.405532] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.405568] pci 0000:00:1b.0: reg 0x10: [mem 0x94200000-0x94203fff 64bit] [ 0.405686] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.405986] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.406134] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.406430] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.406577] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.406873] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.406929] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f] [ 0.407224] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.407281] pci 0000:00:1d.1: reg 0x20: [io 0x3060-0x307f] [ 0.407585] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.407642] pci 0000:00:1d.2: reg 0x20: [io 0x3040-0x305f] [ 0.407936] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.407993] pci 0000:00:1d.3: reg 0x20: [io 0x3020-0x303f] [ 0.408290] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.408338] pci 0000:00:1d.7: reg 0x10: [mem 0x94204400-0x942047ff] [ 0.419173] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.419458] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.419809] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 [ 0.420228] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601 [ 0.420257] pci 0000:00:1f.2: reg 0x10: [io 0x30b8-0x30bf] [ 0.420271] pci 0000:00:1f.2: reg 0x14: [io 0x30cc-0x30cf] [ 0.420283] pci 0000:00:1f.2: reg 0x18: [io 0x30b0-0x30b7] [ 0.420295] pci 0000:00:1f.2: reg 0x1c: [io 0x30c8-0x30cb] [ 0.420306] pci 0000:00:1f.2: reg 0x20: [io 0x30a0-0x30af] [ 0.420320] pci 0000:00:1f.2: reg 0x24: [mem 0x94204000-0x942043ff] [ 0.420386] pci 0000:00:1f.2: PME# supported from D3hot [ 0.420648] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.420727] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.426299] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.426343] pci 0000:01:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.426382] pci 0000:01:00.0: reg 0x18: [mem 0x90010000-0x90010fff 64bit pref] [ 0.426408] pci 0000:01:00.0: reg 0x20: [mem 0x90000000-0x9000ffff 64bit pref] [ 0.426426] pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.426567] pci 0000:01:00.0: supports D1 D2 [ 0.426571] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.426868] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.426877] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.426883] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] [ 0.426892] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.427070] pci 0000:02:00.0: [10ec:8172] type 00 class 0x028000 [ 0.427114] pci 0000:02:00.0: reg 0x10: [io 0x1000-0x10ff] [ 0.427132] pci 0000:02:00.0: reg 0x14: [mem 0x92000000-0x92003fff] [ 0.427322] pci 0000:02:00.0: supports D1 D2 [ 0.427326] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.427576] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.427583] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.427589] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] [ 0.427598] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 0.427628] pci_bus 0000:03: extended config space not accessible [ 0.427746] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.427762] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.427766] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.427770] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.427775] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) [ 0.428214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.428588] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 0.428957] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.429356] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.429725] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.430105] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.430472] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.430838] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.432902] ACPI: EC: interrupt unblocked [ 0.432925] ACPI: EC: event unblocked [ 0.432940] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.432946] ACPI: \_SB_.PCI0.LPC_.EC0_: Boot DSDT EC used to handle transactions and events [ 0.434645] SCSI subsystem initialized [ 0.434790] libata version 3.00 loaded. [ 0.434790] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.434790] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.434790] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.434790] vgaarb: loaded [ 0.434790] ACPI: bus type USB registered [ 0.434790] usbcore: registered new interface driver usbfs [ 0.434790] usbcore: registered new interface driver hub [ 0.434790] usbcore: registered new device driver usb [ 0.434790] pps_core: LinuxPPS API ver. 1 registered [ 0.434790] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.434790] PTP clock support registered [ 0.434790] EDAC MC: Ver: 3.0.0 [ 0.434790] PCI: Using ACPI for IRQ routing [ 0.444587] PCI: pci_cache_line_size set to 64 bytes [ 0.444671] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.444676] e820: reserve RAM buffer [mem 0x7f494000-0x7fffffff] [ 0.445842] NetLabel: Initializing [ 0.445842] NetLabel: domain hash size = 128 [ 0.445842] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.445842] NetLabel: unlabeled traffic allowed by default [ 0.448126] hpet: 3 channels of 0 reserved for per-cpu timers [ 0.448133] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.448142] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.449912] clocksource: Switched to clocksource tsc-early [ 0.502861] VFS: Disk quotas dquot_6.6.0 [ 0.502916] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.502994] *** VALIDATE hugetlbfs *** [ 0.503320] AppArmor: AppArmor Filesystem Enabled [ 0.503426] pnp: PnP ACPI init [ 0.505342] system 00:00: [io 0x0600-0x060f] has been reserved [ 0.505348] system 00:00: [io 0x0610] has been reserved [ 0.505352] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.505357] system 00:00: [io 0x0810-0x0817] has been reserved [ 0.505361] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.505366] system 00:00: [io 0x0500-0x053f] has been reserved [ 0.505370] system 00:00: [io 0x0380-0x0381] has been reserved [ 0.505377] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.505382] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.505387] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.505392] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.505396] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.505402] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.505407] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.505426] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.505653] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.505945] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.506118] pnp 00:03: Plug and Play ACPI device, IDs SYN014f SYN0100 SYN0002 PNP0f13 (active) [ 0.506481] pnp: PnP ACPI: found 4 devices [ 0.513260] thermal_sys: Registered thermal governor 'fair_share' [ 0.513264] thermal_sys: Registered thermal governor 'bang_bang' [ 0.513267] thermal_sys: Registered thermal governor 'step_wise' [ 0.513269] thermal_sys: Registered thermal governor 'user_space' [ 0.513271] thermal_sys: Registered thermal governor 'power_allocator' [ 0.517813] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.517932] pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.517977] pci 0000:01:00.0: BAR 6: assigned [mem 0x93000000-0x9300ffff pref] [ 0.517983] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.517991] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.517999] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] [ 0.518006] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 0.518015] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.518020] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 0.518028] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] [ 0.518035] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 0.518045] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.518062] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.518066] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.518070] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.518074] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window] [ 0.518078] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.518082] pci_bus 0000:01: resource 1 [mem 0x93000000-0x93ffffff] [ 0.518086] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref] [ 0.518090] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.518094] pci_bus 0000:02: resource 1 [mem 0x92000000-0x92ffffff] [ 0.518098] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref] [ 0.518102] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.518106] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.518110] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.518114] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff window] [ 0.518511] NET: Registered protocol family 2 [ 0.518996] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.519063] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.519246] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.519376] TCP: Hash tables configured (established 16384 bind 16384) [ 0.519564] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.519614] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.520029] NET: Registered protocol family 1 [ 0.520057] NET: Registered protocol family 44 [ 0.520093] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.545957] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x644 took 21595 usecs [ 0.545998] PCI: CLS 64 bytes, default 64 [ 0.546165] Trying to unpack rootfs image as initramfs... [ 2.405457] Freeing initrd memory: 42572K [ 2.406015] check: Scanning for low memory corruption every 60 seconds [ 2.407443] Initialise system trusted keyrings [ 2.407470] Key type blacklist registered [ 2.407669] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 2.413964] zbud: loaded [ 2.415548] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.416413] fuse: init (API version 7.31) [ 2.416897] Platform Keyring initialized [ 2.428280] Key type asymmetric registered [ 2.428284] Asymmetric key parser 'x509' registered [ 2.428326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 2.428481] io scheduler mq-deadline registered [ 2.430614] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.430896] intel_idle: MWAIT substates: 0x20220 [ 2.430900] intel_idle: v0.4.1 model 0x1C [ 2.430910] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2 [ 2.431338] clocksource: Switched to clocksource hpet [ 2.431339] intel_idle: lapic_timer_reliable_states 0x2 [ 2.432757] ACPI: AC Adapter [ACAD] (on-line) [ 2.432960] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.432987] ACPI: Power Button [PWRB] [ 2.433106] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 2.433134] ACPI: Sleep Button [SLPB] [ 2.433265] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 2.433285] ACPI: Lid Switch [LID0] [ 2.433444] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.433503] ACPI: Power Button [PWRF] [ 2.441733] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.441737] ACPI: Thermal Zone [TZ01] (59 C) [ 2.442462] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.454180] Linux agpgart interface v0.103 [ 2.466265] loop: module loaded [ 2.467136] libphy: Fixed MDIO Bus: probed [ 2.467140] tun: Universal TUN/TAP device driver, 1.6 [ 2.467303] PPP generic driver version 2.4.2 [ 2.467570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.467584] ehci-pci: EHCI PCI platform driver [ 2.468302] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.468400] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.468425] ehci-pci 0000:00:1d.7: debug port 1 [ 2.472354] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 2.472396] ehci-pci 0000:00:1d.7: irq 16, io mem 0x94204400 [ 2.478887] battery: ACPI: Battery Slot [BAT0] (battery present) [ 2.490012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.490210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 2.490215] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.490219] usb usb1: Product: EHCI Host Controller [ 2.490222] usb usb1: Manufacturer: Linux 5.3.0-19-generic ehci_hcd [ 2.490226] usb usb1: SerialNumber: ... [ 2.490709] hub 1-0:1.0: USB hub found [ 2.490736] hub 1-0:1.0: 8 ports detected [ 2.491761] ehci-platform: EHCI generic platform driver [ 2.491812] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.491831] ohci-pci: OHCI PCI platform driver [ 2.491868] ohci-platform: OHCI generic platform driver [ 2.491891] uhci_hcd: USB Universal Host Controller Interface driver [ 2.492469] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.492490] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.492505] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.492541] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 [ 2.492767] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.492772] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.492776] usb usb2: Product: UHCI Host Controller [ 2.492780] usb usb2: Manufacturer: Linux 5.3.0-19-generic uhci_hcd [ 2.492783] usb usb2: SerialNumber: ... [ 2.493204] hub 2-0:1.0: USB hub found [ 2.493231] hub 2-0:1.0: 2 ports detected [ 2.494226] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.494248] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.494264] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.494328] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003060 [ 2.494534] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.494539] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.494543] usb usb3: Product: UHCI Host Controller [ 2.494546] usb usb3: Manufacturer: Linux 5.3.0-19-generic uhci_hcd [ 2.494550] usb usb3: SerialNumber: ... [ 2.495004] hub 3-0:1.0: USB hub found [ 2.495030] hub 3-0:1.0: 2 ports detected [ 2.496053] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.496072] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.496088] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.496140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 [ 2.496360] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.496365] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.496369] usb usb4: Product: UHCI Host Controller [ 2.496373] usb usb4: Manufacturer: Linux 5.3.0-19-generic uhci_hcd [ 2.496376] usb usb4: SerialNumber: ... [ 2.496830] hub 4-0:1.0: USB hub found [ 2.496857] hub 4-0:1.0: 2 ports detected [ 2.497939] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.497958] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.497991] uhci_hcd 0000:00:1d.3: detected 2 ports [ 2.498043] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020 [ 2.498267] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03 [ 2.498272] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.498276] usb usb5: Product: UHCI Host Controller [ 2.498279] usb usb5: Manufacturer: Linux 5.3.0-19-generic uhci_hcd [ 2.498283] usb usb5: SerialNumber: ... [ 2.498739] hub 5-0:1.0: USB hub found [ 2.498767] hub 5-0:1.0: 2 ports detected [ 2.499442] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 2.510704] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.510725] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.511207] mousedev: PS/2 mouse device common for all mice [ 2.511935] rtc_cmos 00:01: RTC can wake from S4 [ 2.512300] rtc_cmos 00:01: registered as rtc0 [ 2.512374] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.512402] i2c /dev entries driver [ 2.512618] device-mapper: uevent: version 1.0.3 [ 2.513023] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: XXX@XXX [ 2.513187] platform eisa.0: Probing EISA bus 0 [ 2.513194] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.513198] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.513202] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.513205] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.513209] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.513212] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.513216] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.513220] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.513223] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.513227] platform eisa.0: EISA: Detected 0 cards [ 2.513234] intel_pstate: CPU model not supported [ 2.513306] ledtrig-cpu: registered to indicate activity on CPUs [ 2.514297] NET: Registered protocol family 10 [ 2.515934] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.553784] Segment Routing with IPv6 [ 2.553896] NET: Registered protocol family 17 [ 2.554089] Key type dns_resolver registered [ 2.554744] RAS: Correctable Errors collector initialized. [ 2.554855] microcode: sig=0x106ca, pf=0x4, revision=0x107 [ 2.555025] microcode: Microcode Update Driver: v2.2. [ 2.555562] registered taskstats version 1 [ 2.555593] Loading compiled-in X.509 certificates [ 2.567029] Loaded X.509 cert 'Build time autogenerated kernel key: 33d29ff586fb896a3c94b1890ca292c642995ff7' [ 2.567102] Loaded X.509 cert 'Endless Secure Boot Signer: 00abe94c46' [ 2.567204] zswap: loaded using pool lzo/zbud [ 2.605149] Key type big_key registered [ 2.623799] Key type encrypted registered [ 2.623824] AppArmor: AppArmor sha1 policy hashing enabled [ 2.623847] ima: No TPM chip found, activating TPM-bypass! [ 2.623866] ima: Allocated hash algorithm: sha1 [ 2.623881] No architecture policies found [ 2.623931] evm: Initialising EVM extended attributes: [ 2.623934] evm: security.selinux [ 2.623935] evm: security.SMACK64 [ 2.623937] evm: security.SMACK64EXEC [ 2.623938] evm: security.SMACK64TRANSMUTE [ 2.623940] evm: security.SMACK64MMAP [ 2.623941] evm: security.apparmor [ 2.623942] evm: security.ima [ 2.623944] evm: security.capability [ 2.623946] evm: HMAC attrs: 0x1 [ 2.625112] PM: Magic number: 11:440:484 [ 2.625423] rtc_cmos 00:01: setting system clock to 2019-11-28T13:27:12 UTC (1574947632) [ 2.627659] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 2.633106] Freeing unused decrypted memory: 2040K [ 2.635569] Freeing unused kernel image memory: 2652K [ 2.650000] Write protecting the kernel read-only data: 22528k [ 2.652194] Freeing unused kernel image memory: 2008K [ 2.653485] Freeing unused kernel image memory: 1364K [ 2.692594] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.692645] Run /init as init process [ 2.741575] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.762269] systemd[1]: Detected architecture x86-64. [ 2.762283] systemd[1]: Running in initial RAM disk. [ 2.766576] systemd[1]: No hostname configured. [ 2.766597] systemd[1]: Set hostname to ... [ 2.766693] random: systemd: uninitialized urandom read (16 bytes read) [ 2.766719] systemd[1]: Initializing machine ID from random generator. [ 2.767851] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 2.916907] random: systemd: uninitialized urandom read (16 bytes read) [ 2.917377] systemd[1]: Listening on udev Control Socket. [ 2.917653] random: systemd: uninitialized urandom read (16 bytes read) [ 2.918204] systemd[1]: Listening on Journal Socket. [ 2.918303] systemd[1]: Condition check resulted in Install custom splash theme to runtime dir being skipped. [ 3.033959] usb 3-2: new full-speed USB device number 2 using uhci_hcd [ 3.237031] usb 3-2: New USB device found, idVendor=18e8, idProduct=6260, bcdDevice= 5.40 [ 3.237040] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.237046] usb 3-2: Product: Bluetooth USB [ 3.237051] usb 3-2: Manufacturer: Broadcom Corp [ 3.237060] usb 3-2: SerialNumber: ... [ 3.730229] usb 1-8: new high-speed USB device number 3 using ehci-pci [ 3.896851] usb 1-8: New USB device found, idVendor=5986, idProduct=01aa, bcdDevice=18.04 [ 3.896859] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.896863] usb 1-8: Product: LG Webcam [ 3.896868] usb 1-8: Manufacturer: Etron Technologies [ 3.958963] ahci 0000:00:1f.2: version 3.0 [ 3.959960] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 3.960018] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 3.960027] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part [ 3.993914] scsi host0: ahci [ 4.026772] scsi host1: ahci [ 4.077973] scsi host2: ahci [ 4.086457] scsi host3: ahci [ 4.086884] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 26 [ 4.086892] ata2: DUMMY [ 4.086897] ata3: DUMMY [ 4.086900] ata4: DUMMY [ 4.112337] pci 0000:00:00.0: Intel GMA3150 Chipset [ 4.112388] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 4.112487] pci 0000:00:00.0: detected 8192K stolen memory [ 4.112573] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.113458] Console: switching to colour dummy device 80x25 [ 4.118643] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.118653] [drm] Driver supports precise vblank timestamp query. [ 4.134550] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.170852] [drm] RC6 disabled, disabling runtime PM support [ 4.171228] [drm] Initialized overlay support. [ 4.172473] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 4.176267] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 4.201494] acpi device:22: registered as cooling_device2 [ 4.201907] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 4.222781] fbcon: i915drmfb (fb0) is primary device [ 4.400988] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.401705] ata1.00: unexpected _GTF length (4) [ 4.473480] ata1.00: ATA-8: TOSHIBA MK1652GSX, LV010A, max UDMA/100 [ 4.473488] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 4.474562] ata1.00: unexpected _GTF length (4) [ 4.474817] ata1.00: configured for UDMA/100 [ 4.475371] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1652GS 0A PQ: 0 ANSI: 5 [ 4.476765] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 4.476842] sd 0:0:0:0: [sda] Write Protect is off [ 4.476849] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.477049] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.482091] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.533995] sda: sda1 sda2 [ 4.536085] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.788618] random: fast init done [ 4.956322] Console: switching to colour frame buffer device 128x37 [ 4.978483] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 6.313464] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 8.236535] systemd-journald[193]: Received SIGTERM from PID 1 (systemd). [ 8.630211] printk: systemd: 23 output lines suppressed due to ratelimiting [ 9.056410] random: crng init done [ 9.056416] random: 7 urandom warning(s) missed due to ratelimiting [ 11.351590] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 11.370171] systemd[1]: Detected architecture x86-64. [ 11.392635] systemd[1]: Set hostname to ... [ 11.400465] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 18.989477] systemd[1]: initrd-switch-root.service: Succeeded. [ 18.991123] systemd[1]: Stopped Switch Root. [ 18.991993] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart. [ 18.992345] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 18.992429] systemd[1]: Stopped Journal Service. [ 18.997575] systemd[1]: Starting Journal Service... [ 18.998038] systemd[1]: Reached target Remote Encrypted Volumes. [ 18.999040] systemd[1]: systemd-fsck-root.service: Succeeded. [ 19.001473] systemd[1]: Stopped File System Check on Root Device. [ 19.002809] systemd[1]: Listening on udev Control Socket. [ 19.217736] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 20.635658] systemd-journald[294]: Received request to flush runtime journal from PID 1 [ 34.906192] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20190703/utaddress-213) [ 34.906215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 34.906225] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053E (\GPIO) (20190703/utaddress-213) [ 34.906241] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 34.906247] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053E (\GPIO) (20190703/utaddress-213) [ 34.906263] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 34.906267] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 36.454343] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 36.454353] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 36.454359] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 36.454363] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 36.454367] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 36.454374] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 36.454380] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 36.484180] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 36.484753] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 36.837913] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 36.928738] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 36.964044] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 36.999438] libphy: r8169: probed [ 37.000039] r8169 0000:01:00.0 eth0: RTL8102e/RTL8103e, XX:XX:XX:XX:XX:XX, XID 24e, IRQ 16 [ 37.449925] io scheduler bfq registered [ 37.643301] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 37.643315] cfg80211: failed to load regulatory.db [ 38.257345] Bluetooth: Core ver 2.22 [ 38.257443] NET: Registered protocol family 31 [ 38.257448] Bluetooth: HCI device and connection manager initialized [ 38.257461] Bluetooth: HCI socket layer initialized [ 38.257470] Bluetooth: L2CAP socket layer initialized [ 38.257492] Bluetooth: SCO socket layer initialized [ 38.533757] mc: Linux media interface: v0.10 [ 38.586395] rtl8192se: FW Power Save off (module option) [ 38.648391] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE Loading firmware rtlwifi/rtl8192sefw.bin [ 38.676483] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 38.976906] usbcore: registered new interface driver btusb [ 39.018282] videodev: Linux video capture interface: v2.00 [ 39.097143] psmouse serio1: synaptics: queried max coordinates: x [..5812], y [..5148] [ 39.176701] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0400/0x0, board id: 0, fw id: 642912 [ 39.230810] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 39.421462] intel_powerclamp: No package C-state available [ 39.473401] intel_powerclamp: No package C-state available [ 39.633677] uvcvideo: Found UVC 1.00 device LG Webcam (5986:01aa) [ 39.653903] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 39.655346] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized! [ 39.655355] uvcvideo 1-8:1.0: Entity type for entity Processing 3 was not initialized! [ 39.655363] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized! [ 39.655716] input: LG Webcam: LG Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10 [ 39.656060] usbcore: registered new interface driver uvcvideo [ 39.656064] USB Video Class driver (1.1.1) [ 45.800293] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 45.894556] rtl8192se 0000:02:00.0 wlp2s0: renamed from wlan0 [ 93.952130] zram: Added device: zram0 [ 94.045916] zram0: detected capacity change from 0 to 3105275904 [ 95.890782] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 95.890787] Bluetooth: BNEP filters: protocol multicast [ 95.890800] Bluetooth: BNEP socket layer initialized [ 98.525038] RTL8201CP Ethernet r8169-100:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 98.629115] r8169 0000:01:00.0 enp1s0: Link is Down [ 100.260049] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 100.260088] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 107.732126] perf: interrupt took too long (2554 > 2500), lowering kernel.perf_event_max_sample_rate to 78250 [ 110.677747] Bluetooth: RFCOMM TTY layer initialized [ 110.677764] Bluetooth: RFCOMM socket layer initialized [ 110.677786] Bluetooth: RFCOMM ver 1.11 [ 116.737960] Adding 3032492k swap on /dev/zram0. Priority:-2 extents:1 across:3032492k SSFS [ 126.046903] rfkill: input handler disabled [ 126.074727] perf: interrupt took too long (3235 > 3192), lowering kernel.perf_event_max_sample_rate to 61750 [ 158.500434] perf: interrupt took too long (4061 > 4043), lowering kernel.perf_event_max_sample_rate to 49250 [ 170.656466] rfkill: input handler enabled [ 173.744653] gdm-session-wor (2914): drop_caches: 2 [ 209.359913] perf: interrupt took too long (5096 > 5076), lowering kernel.perf_event_max_sample_rate to 39000 [ 211.316751] rfkill: input handler disabled [ 252.337356] perf: interrupt took too long (6374 > 6370), lowering kernel.perf_event_max_sample_rate to 31250 [ 2259.242940] perf: interrupt took too long (7985 > 7967), lowering kernel.perf_event_max_sample_rate to 25000 [ 2351.537424] perf: interrupt took too long (9988 > 9981), lowering kernel.perf_event_max_sample_rate to 20000 [ 5636.155538] r8169 0000:01:00.0 enp1s0: Link is Down [ 6067.281302] PM: suspend entry (deep) [ 6067.345330] Filesystems sync: 0.064 seconds [ 6067.488595] Freezing user space processes ... (elapsed 0.008 seconds) done. [ 6067.496886] OOM killer disabled. [ 6067.496888] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6067.498382] printk: Suspending console(s) (use no_console_suspend to debug) [ 6067.510119] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6067.512958] sd 0:0:0:0: [sda] Stopping disk [ 6068.046869] ACPI: EC: interrupt blocked [ 6068.066315] ACPI: Preparing to enter system sleep state S3 [ 6068.071964] ACPI: EC: event blocked [ 6068.071966] ACPI: EC: EC stopped [ 6068.071968] PM: Saving platform NVS memory [ 6068.073056] Disabling non-boot CPUs ... [ 6068.075035] smpboot: CPU 1 is now offline [ 6068.079176] ACPI: Low-level resume complete [ 6068.079176] ACPI: EC: EC started [ 6068.079176] PM: Restoring platform NVS memory [ 6068.079176] Enabling non-boot CPUs ... [ 6068.079176] x86: Booting SMP configuration: [ 6068.079176] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6068.079144] Disabled fast string operations [ 6068.080859] CPU1 is up [ 6068.081348] ACPI: Waking up from system sleep state S3 [ 6068.146623] ACPI: EC: interrupt unblocked [ 6068.168912] usb usb2: root hub lost power or was reset [ 6068.169077] usb usb3: root hub lost power or was reset [ 6068.169158] usb usb4: root hub lost power or was reset [ 6068.169249] usb usb5: root hub lost power or was reset [ 6068.173216] ACPI: EC: event unblocked [ 6068.174803] sd 0:0:0:0: [sda] Starting disk [ 6068.529952] usb 1-8: reset high-speed USB device number 3 using ehci-pci [ 6068.533981] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [ 6068.707994] OOM killer enabled. [ 6068.707997] Restarting tasks ... done. [ 6068.792386] video LNXVIDEO:00: Restoring backlight state [ 6068.797085] PM: suspend exit [ 6068.946786] psmouse serio1: synaptics: queried max coordinates: x [..5812], y [..5148] [ 6068.986020] usb 1-7: new high-speed USB device number 4 using ehci-pci [ 6069.157382] usb 1-7: New USB device found, idVendor=0bda, idProduct=0158, bcdDevice=58.88 [ 6069.157395] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6069.157399] usb 1-7: Product: USB2.0-CRW [ 6069.157402] usb 1-7: Manufacturer: Generic [ 6069.157406] usb 1-7: SerialNumber: ... [ 6069.722024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6069.722943] ata1.00: unexpected _GTF length (4) [ 6069.724191] ata1.00: unexpected _GTF length (4) [ 6069.724403] ata1.00: configured for UDMA/100 [ 6071.149450] RTL8201CP Ethernet r8169-100:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 6071.256141] r8169 0000:01:00.0 enp1s0: Link is Down [ 6071.887880] usbcore: registered new interface driver usb-storage [ 6072.060029] usbcore: registered new interface driver uas [ 6072.266548] ums-realtek 1-7:1.0: USB Mass Storage device detected [ 6072.318625] scsi host4: usb-storage 1-7:1.0 [ 6072.319146] usbcore: registered new interface driver ums-realtek [ 6072.904116] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 6072.904145] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 6073.340737] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 6073.350122] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 6073.356140] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 7271.467677] r8169 0000:01:00.0 enp1s0: Link is Down [ 7276.462153] PM: suspend entry (deep) [ 7276.615856] Filesystems sync: 0.153 seconds [ 7276.616345] Freezing user space processes ... (elapsed 0.007 seconds) done. [ 7276.623638] OOM killer disabled. [ 7276.623640] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7276.625424] printk: Suspending console(s) (use no_console_suspend to debug) [ 7276.638228] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 7276.638459] sd 0:0:0:0: [sda] Stopping disk [ 7277.150966] ACPI: EC: interrupt blocked [ 7277.170336] ACPI: Preparing to enter system sleep state S3 [ 7277.177425] ACPI: EC: event blocked [ 7277.177427] ACPI: EC: EC stopped [ 7277.177429] PM: Saving platform NVS memory [ 7277.178579] Disabling non-boot CPUs ... [ 7277.180683] smpboot: CPU 1 is now offline [ 7277.183237] ACPI: Low-level resume complete [ 7277.183237] ACPI: EC: EC started [ 7277.183237] PM: Restoring platform NVS memory [ 7277.183237] Enabling non-boot CPUs ... [ 7277.183237] x86: Booting SMP configuration: [ 7277.183237] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 7277.180543] Disabled fast string operations [ 7277.184985] CPU1 is up [ 7277.185468] ACPI: Waking up from system sleep state S3 [ 7277.250668] ACPI: EC: interrupt unblocked [ 7277.273148] usb usb2: root hub lost power or was reset [ 7277.273312] usb usb3: root hub lost power or was reset [ 7277.273394] usb usb4: root hub lost power or was reset [ 7277.273483] usb usb5: root hub lost power or was reset [ 7277.275709] sd 0:0:0:0: [sda] Starting disk [ 7277.276983] ACPI: EC: event unblocked [ 7277.642031] usb 1-7: reset high-speed USB device number 4 using ehci-pci [ 7277.649934] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [ 7277.930011] usb 1-8: reset high-speed USB device number 3 using ehci-pci [ 7277.999919] psmouse serio1: synaptics: queried max coordinates: x [..5812], y [..5148] [ 7278.104209] OOM killer enabled. [ 7278.104213] Restarting tasks ... done. [ 7278.196921] video LNXVIDEO:00: Restoring backlight state [ 7278.199558] PM: suspend exit [ 7278.789975] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7278.790987] ata1.00: unexpected _GTF length (4) [ 7278.793314] ata1.00: unexpected _GTF length (4) [ 7278.794491] ata1.00: configured for UDMA/100 [ 7279.157827] RTL8201CP Ethernet r8169-100:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 7279.282970] r8169 0000:01:00.0 enp1s0: Link is Down [ 7280.912356] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 7280.912386] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 8123.512053] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [ 8123.674112] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 8123.676852] wlp2s0: authenticated [ 8123.681926] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 8123.685441] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [ 8123.686916] rtl8192se: switch case 0x5e not processed [ 8123.686977] wlp2s0: associated [ 8124.196592] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 8124.198085] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 8938.017968] r8169 0000:01:00.0 enp1s0: Link is Down [ 9200.013987] usb 1-1: new high-speed USB device number 5 using ehci-pci [ 9200.171411] usb 1-1: New USB device found, idVendor=0e8d, idProduct=2008, bcdDevice=ff.ff [ 9200.171417] usb 1-1: New USB device strings: Mfr=3, Product=4, SerialNumber=... [ 9200.171421] usb 1-1: Product: MIX [ 9200.171424] usb 1-1: Manufacturer: MediaTek [ 9200.171428] usb 1-1: SerialNumber: ... [ 9205.770009] usb 1-1: reset high-speed USB device number 5 using ehci-pci [ 9206.077994] usb 1-1: reset high-speed USB device number 5 using ehci-pci [10703.164596] PM: suspend entry (deep) [10703.280068] Filesystems sync: 0.115 seconds [10703.280432] Freezing user space processes ... (elapsed 0.007 seconds) done. [10703.288387] OOM killer disabled. [10703.288389] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [10703.290197] printk: Suspending console(s) (use no_console_suspend to debug) [10703.291750] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [10703.314127] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10703.314270] sd 0:0:0:0: [sda] Stopping disk [10703.842938] ACPI: EC: interrupt blocked [10703.862277] ACPI: Preparing to enter system sleep state S3 [10703.867461] ACPI: EC: event blocked [10703.867463] ACPI: EC: EC stopped [10703.867465] PM: Saving platform NVS memory [10703.868535] Disabling non-boot CPUs ... [10703.870540] smpboot: CPU 1 is now offline [10703.871324] ACPI: Low-level resume complete [10703.871324] ACPI: EC: EC started [10703.871324] PM: Restoring platform NVS memory [10703.871324] Enabling non-boot CPUs ... [10703.871324] x86: Booting SMP configuration: [10703.871324] smpboot: Booting Node 0 Processor 1 APIC 0x1 [10703.869868] Disabled fast string operations [10703.874888] CPU1 is up [10703.875376] ACPI: Waking up from system sleep state S3 [10703.942652] ACPI: EC: interrupt unblocked [10703.965724] usb usb2: root hub lost power or was reset [10703.965970] usb usb3: root hub lost power or was reset [10703.966061] usb usb4: root hub lost power or was reset [10703.966150] usb usb5: root hub lost power or was reset [10703.969762] ACPI: EC: event unblocked [10703.972820] sd 0:0:0:0: [sda] Starting disk [10704.393987] usb 3-2: reset full-speed USB device number 2 using uhci_hcd [10704.394015] usb 1-8: reset high-speed USB device number 3 using ehci-pci [10704.689980] usb 1-7: reset high-speed USB device number 4 using ehci-pci [10704.691815] psmouse serio1: synaptics: queried max coordinates: x [..5812], y [..5148] [10704.855759] OOM killer enabled. [10704.855762] Restarting tasks ... done. [10704.917025] video LNXVIDEO:00: Restoring backlight state [10704.920328] PM: suspend exit [10705.489944] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10705.490913] ata1.00: unexpected _GTF length (4) [10705.492216] ata1.00: unexpected _GTF length (4) [10705.492473] ata1.00: configured for UDMA/100 [10706.622926] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [10706.664180] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [10706.668896] wlp2s0: authenticated [10706.673932] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [10706.677514] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [10706.679198] rtl8192se: switch case 0x5e not processed [10706.679247] wlp2s0: associated [10706.768657] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [10707.076402] wlp2s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [10707.401494] RTL8201CP Ethernet r8169-100:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [10707.509899] r8169 0000:01:00.0 enp1s0: Link is Down [10709.959948] wlp2s0: authenticate with XX:XX:XX:XX:XX:XX [10710.121303] wlp2s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [10710.123488] wlp2s0: authenticated [10710.125962] wlp2s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [10710.130097] wlp2s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1411 status=0 aid=3) [10710.131555] rtl8192se: switch case 0x5e not processed [10710.131606] wlp2s0: associated [10710.148591] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [10710.166884] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready