[ 0.000000] Linux version 5.4.0-47-generic (XXX@XXX) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #51~18.04.1-Ubuntu SMP Sat Sep 5 14:35:50 UTC 2020 (Ubuntu 5.4.0-47.51~18.04.1-generic 5.4.55) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-47-generic root=UUID=HASH_30E-7CB6-8281-41A5-B004E009A5FC ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b4b1efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b4b1f000-0x00000000b531ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b5320000-0x00000000b537bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b537c000-0x00000000b677bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b677c000-0x00000000bf17efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf17f000-0x00000000bf97efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf97f000-0x00000000bfb7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfb7f000-0x00000000bfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xb46c0018-0xb46cea57] usable ==> usable [ 0.000000] e820: update [mem 0xb46c0018-0xb46cea57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b46c0017] usable [ 0.000000] reserve setup_data: [mem 0x00000000b46c0018-0x00000000b46cea57] usable [ 0.000000] reserve setup_data: [mem 0x00000000b46cea58-0x00000000b4b1efff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b4b1f000-0x00000000b531ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b5320000-0x00000000b537bfff] usable [ 0.000000] reserve setup_data: [mem 0x00000000b537c000-0x00000000b677bfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b677c000-0x00000000bf17efff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bf17f000-0x00000000bf97efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000bf97f000-0x00000000bfb7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000bfb7f000-0x00000000bfbfefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000011effffff] usable [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI=0xbfbfe000 ACPI 2.0=0xbfbfe014 SMBIOS=0xbf97df18 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Aspire E1-522/Aspire E1-522, BIOS V2.09 11/19/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1497.184 MHz processor [ 0.000040] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000044] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000060] last_pfn = 0x11f000 max_arch_pfn = 0x400000000 [ 0.000069] MTRR default type: uncachable [ 0.000071] MTRR fixed ranges enabled: [ 0.000074] 00000-9FFFF write-back [ 0.000076] A0000-BFFFF uncachable [ 0.000079] C0000-FFFFF write-through [ 0.000080] MTRR variable ranges enabled: [ 0.000084] 0 base 0000000000 mask FF80000000 write-back [ 0.000087] 1 base 0080000000 mask FFC0000000 write-back [ 0.000090] 2 base 00BFB67000 mask FFFFFFF000 uncachable [ 0.000093] 3 base 00FFC00000 mask FFFFC00000 write-protect [ 0.000094] 4 disabled [ 0.000096] 5 disabled [ 0.000097] 6 disabled [ 0.000098] 7 disabled [ 0.000101] TOM2: 000000011f000000 aka 4592M [ 0.000803] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000943] last_pfn = 0xbfc00 max_arch_pfn = 0x400000000 [ 0.012125] check: Scanning 1 areas for low memory corruption [ 0.012136] Using GB pages for direct mapping [ 0.014094] secureboot: Secure boot enabled [ 0.014097] RAMDISK: [mem 0x3d90d000-0x3fffdfff] [ 0.014117] ACPI: Early table checksum verification disabled [ 0.014126] ACPI: RSDP 0x00000000BFBFE014 000024 (v02 ACRSYS) [ 0.014133] ACPI: XSDT 0x00000000BFBFE120 0000B4 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.014146] ACPI: FACP 0x00000000BFBFC000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014160] ACPI: DSDT 0x00000000BFBED000 00A01D (v01 ACRSYS ACRPRDCT F0000000 1025 00040000) [ 0.014168] ACPI: FACS 0x00000000BFB26000 000040 [ 0.014175] ACPI: UEFI 0x00000000BFBFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014183] ACPI: HPET 0x00000000BFBFB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014191] ACPI: APIC 0x00000000BFBFA000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014199] ACPI: MCFG 0x00000000BFBF9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014206] ACPI: ASF! 0x00000000BFBF8000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014214] ACPI: BOOT 0x00000000BFBEC000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014221] ACPI: WDRT 0x00000000BFBEB000 000047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 0.014229] ACPI: WDAT 0x00000000BFBEA000 0001AC (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014236] ACPI: FPDT 0x00000000BFBE9000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014244] ACPI: MSDM 0x00000000BFBE7000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014251] ACPI: SSDT 0x00000000BFBE6000 000B10 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014258] ACPI: SSDT 0x00000000BFBE1000 0046B7 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 0.014266] ACPI: VFCT 0x00000000BFBD2000 00EA84 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014273] ACPI: SSDT 0x00000000BFBD0000 0013CA (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014281] ACPI: SSDT 0x00000000BFBCF000 000D4E (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014288] ACPI: SSDT 0x00000000BFBCD000 0010C2 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014296] ACPI: BGRT 0x00000000BFBCC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 0.014318] ACPI: Local APIC address 0xfee00000 [ 0.014522] No NUMA configuration found [ 0.014525] Faking a node at [mem 0x0000000000000000-0x000000011effffff] [ 0.014550] NODE_DATA(0) allocated [mem 0x11efd5000-0x11effffff] [ 0.015487] Zone ranges: [ 0.015489] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.015492] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.015494] Normal [mem 0x0000000100000000-0x000000011effffff] [ 0.015497] Device empty [ 0.015498] Movable zone start for each node [ 0.015504] Early memory node ranges [ 0.015506] node 0: [mem 0x0000000000001000-0x000000000006dfff] [ 0.015509] node 0: [mem 0x0000000000070000-0x0000000000085fff] [ 0.015510] node 0: [mem 0x0000000000100000-0x00000000b4b1efff] [ 0.015513] node 0: [mem 0x00000000b5320000-0x00000000b537bfff] [ 0.015515] node 0: [mem 0x00000000b677c000-0x00000000bf17efff] [ 0.015516] node 0: [mem 0x00000000bfbff000-0x00000000bfbfffff] [ 0.015518] node 0: [mem 0x0000000100000000-0x000000011effffff] [ 0.015845] Zeroed struct page in unavailable ranges: 15102 pages [ 0.015848] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] [ 0.015851] On node 0 totalpages: 902402 [ 0.015854] DMA zone: 64 pages used for memmap [ 0.015855] DMA zone: 21 pages reserved [ 0.015857] DMA zone: 3971 pages, LIFO batch:0 [ 0.016029] DMA32 zone: 12054 pages used for memmap [ 0.016031] DMA32 zone: 771455 pages, LIFO batch:63 [ 0.047990] Normal zone: 1984 pages used for memmap [ 0.047996] Normal zone: 126976 pages, LIFO batch:31 [ 0.052780] ACPI: PM-Timer IO Port: 0x408 [ 0.052787] ACPI: Local APIC address 0xfee00000 [ 0.052806] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.052808] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.052810] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.052812] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.052828] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.052836] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.052841] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.052845] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.052849] ACPI: IRQ0 used by override. [ 0.052851] ACPI: IRQ9 used by override. [ 0.052856] Using ACPI (MADT) for SMP configuration information [ 0.052860] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.052886] e820: update [mem 0xbc3e0000-0xbc45afff] usable ==> reserved [ 0.052914] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.052974] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.052979] PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff] [ 0.052983] PM: Registered nosave memory: [mem 0x00086000-0x000bffff] [ 0.052985] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.052989] PM: Registered nosave memory: [mem 0xb46c0000-0xb46c0fff] [ 0.052993] PM: Registered nosave memory: [mem 0xb46ce000-0xb46cefff] [ 0.052997] PM: Registered nosave memory: [mem 0xb4b1f000-0xb531ffff] [ 0.053002] PM: Registered nosave memory: [mem 0xb537c000-0xb677bfff] [ 0.053006] PM: Registered nosave memory: [mem 0xbc3e0000-0xbc45afff] [ 0.053011] PM: Registered nosave memory: [mem 0xbf17f000-0xbf97efff] [ 0.053012] PM: Registered nosave memory: [mem 0xbf97f000-0xbfb7efff] [ 0.053013] PM: Registered nosave memory: [mem 0xbfb7f000-0xbfbfefff] [ 0.053018] PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff] [ 0.053019] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.053021] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.053022] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.053024] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.053025] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.053027] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.053028] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.053029] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.053031] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.053032] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.053034] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.053035] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.053040] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.053042] Booting paravirtualized kernel on bare hardware [ 0.053049] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.053068] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.053948] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288 [ 0.053975] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152 [ 0.053977] pcpu-alloc: [0] 0 1 2 3 [ 0.054066] Built 1 zonelists, mobility grouping on. Total pages: 888279 [ 0.054068] Policy zone: Normal [ 0.054072] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-47-generic root=UUID=HASH_30E-7CB6-8281-41A5-B004E009A5FC ro quiet splash vt.handoff=1 [ 0.055510] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.056147] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.056214] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.075909] Calgary: detecting Calgary via BIOS EBDA area [ 0.075915] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.101395] Memory: 3361612K/3609608K available (14339K kernel code, 2379K rwdata, 4928K rodata, 2704K init, 5020K bss, 247996K reserved, 0K cma-reserved) [ 0.101411] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0 [ 0.101766] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.101803] ftrace: allocating 44208 entries in 173 pages [ 0.142110] rcu: Hierarchical RCU implementation. [ 0.142115] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.142116] Tasks RCU enabled. [ 0.142118] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.142120] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.152144] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16 [ 0.152593] vt handoff: transparent VT on vt#1 [ 0.152615] Console: colour dummy device 80x25 [ 0.152625] printk: console [tty0] enabled [ 0.152666] ACPI: Core revision 20190816 [ 0.153158] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.153181] APIC: Switch to symmetric I/O mode setup [ 0.153846] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.173184] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1594be6d60a, max_idle_ns: 440795224424 ns [ 0.173194] Calibrating delay loop (skipped), value calculated using timer frequency.. 2994.36 BogoMIPS (lpj=5988736) [ 0.173200] pid_max: default: 32768 minimum: 301 [ 0.181310] LSM: Security Framework initializing [ 0.181343] Yama: becoming mindful. [ 0.181410] AppArmor: AppArmor initialized [ 0.181508] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.181527] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.181566] *** VALIDATE tmpfs *** [ 0.181907] *** VALIDATE proc *** [ 0.182043] *** VALIDATE cgroup1 *** [ 0.182046] *** VALIDATE cgroup2 *** [ 0.182145] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.182147] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 0.182156] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.182159] Spectre V2 : Mitigation: Full AMD retpoline [ 0.182161] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.182164] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.182518] Freeing SMP alternatives memory: 40K [ 0.299080] smpboot: CPU0: AMD A4-5000 APU with Radeon(TM) HD Graphics (family: 0x16, model: 0x0, stepping: 0x1) [ 0.299434] Performance Events: AMD PMU driver. [ 0.299441] ... version: 0 [ 0.299443] ... bit width: 48 [ 0.299444] ... generic registers: 4 [ 0.299446] ... value mask: 0000ffffffffffff [ 0.299447] ... max period: 00007fffffffffff [ 0.299448] ... fixed-purpose events: 0 [ 0.299450] ... event mask: 000000000000000f [ 0.299546] rcu: Hierarchical SRCU implementation. [ 0.301134] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.301188] smp: Bringing up secondary CPUs ... [ 0.301188] x86: Booting SMP configuration: [ 0.301188] .... node #0, CPUs: #1 [ 0.004705] do_IRQ: 1.55 No irq handler for vector [ 0.303368] #2 [ 0.004705] do_IRQ: 2.55 No irq handler for vector [ 0.307384] #3 [ 0.004705] do_IRQ: 3.55 No irq handler for vector [ 0.311458] smp: Brought up 1 node, 4 CPUs [ 0.311458] smpboot: Max logical packages: 1 [ 0.311458] smpboot: Total of 4 processors activated (11977.47 BogoMIPS) [ 0.313286] devtmpfs: initialized [ 0.313310] x86/mm: Memory block size: 128MB [ 0.314453] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes) [ 0.314453] PM: Registering ACPI NVS region [mem 0xbf97f000-0xbfb7efff] (2097152 bytes) [ 0.314453] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.314453] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.314453] pinctrl core: initialized pinctrl subsystem [ 0.314453] PM: RTC time: 00:45:46, date: 2020-09-20 [ 0.314453] NET: Registered protocol family 16 [ 0.314453] EISA bus registered [ 0.314453] cpuidle: using governor ladder [ 0.314453] cpuidle: using governor menu [ 0.314453] Simple Boot Flag at 0x44 set to 0x1 [ 0.314453] ACPI: bus type PCI registered [ 0.314453] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.314453] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.314453] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.314453] PCI: Using configuration type 1 for base access [ 0.322035] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.322035] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.325554] ACPI: Added _OSI(Module Device) [ 0.325557] ACPI: Added _OSI(Processor Device) [ 0.325559] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.325560] ACPI: Added _OSI(Processor Aggregator Device) [ 0.325563] ACPI: Added _OSI(Linux-Dell-Video) [ 0.325565] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.325568] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.366184] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.372373] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.382622] ACPI: EC: EC started [ 0.382623] ACPI: EC: interrupt blocked [ 0.397280] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.397285] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.397288] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions [ 0.397289] ACPI: Interpreter enabled [ 0.397342] ACPI: (supports S0 S3 S4 S5) [ 0.397345] ACPI: Using IOAPIC for interrupt routing [ 0.398155] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.401063] ACPI: Enabled 3 GPEs in block 00 to 1F [ 0.424995] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.425010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.425766] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR] [ 0.426481] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] [ 0.426522] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.427410] PCI host bridge to bus 0000:00 [ 0.427416] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.427420] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.427423] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.427426] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.427429] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.427433] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.427436] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.427439] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.427442] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.427445] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.427447] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.427450] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.427453] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.427456] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.427459] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.427462] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.427465] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] [ 0.427468] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window] [ 0.427472] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.427495] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 [ 0.427747] pci 0000:00:01.0: [1002:9832] type 00 class 0x030000 [ 0.427774] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.427786] pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref] [ 0.427795] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff] [ 0.427804] pci 0000:00:01.0: reg 0x24: [mem 0xf0200000-0xf023ffff] [ 0.427813] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.427822] pci 0000:00:01.0: enabling Extended Tags [ 0.427843] pci 0000:00:01.0: BAR 0: assigned to efifb [ 0.427883] pci 0000:00:01.0: supports D1 D2 [ 0.427886] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.428149] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.428173] pci 0000:00:01.1: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit] [ 0.428209] pci 0000:00:01.1: enabling Extended Tags [ 0.428261] pci 0000:00:01.1: supports D1 D2 [ 0.428457] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 [ 0.428685] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400 [ 0.428737] pci 0000:00:02.2: enabling Extended Tags [ 0.428799] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.429061] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 [ 0.429112] pci 0000:00:02.3: enabling Extended Tags [ 0.429173] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.429473] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.429504] pci 0000:00:10.0: reg 0x10: [mem 0xf0248000-0xf0249fff 64bit] [ 0.429623] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.429890] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 0.429915] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f] [ 0.429925] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127] [ 0.429934] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117] [ 0.429944] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123] [ 0.429954] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f] [ 0.429964] pci 0000:00:11.0: reg 0x24: [mem 0xf024e000-0xf024e3ff] [ 0.430024] pci 0000:00:11.0: PME# supported from D3hot [ 0.430466] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.430486] pci 0000:00:12.0: reg 0x10: [mem 0xf024d000-0xf024dfff] [ 0.430778] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.430801] pci 0000:00:12.2: reg 0x10: [mem 0xf024c000-0xf024c0ff] [ 0.430884] pci 0000:00:12.2: supports D1 D2 [ 0.430887] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.431127] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.431147] pci 0000:00:13.0: reg 0x10: [mem 0xf024b000-0xf024bfff] [ 0.431439] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.431462] pci 0000:00:13.2: reg 0x10: [mem 0xf024a000-0xf024a0ff] [ 0.431545] pci 0000:00:13.2: supports D1 D2 [ 0.431548] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.431786] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.432089] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.432117] pci 0000:00:14.2: reg 0x10: [mem 0xf0244000-0xf0247fff 64bit] [ 0.432195] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.432426] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.432730] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 [ 0.432949] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 [ 0.433151] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 [ 0.433364] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 [ 0.433573] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 [ 0.433778] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 [ 0.434108] pci 0000:01:00.0: [1969:10a1] type 00 class 0x020000 [ 0.434147] pci 0000:01:00.0: reg 0x10: [mem 0xf1000000-0xf103ffff 64bit] [ 0.434160] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x207f] [ 0.434293] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.434486] pci 0000:01:00.1: [1969:3010] type 00 class 0x080501 [ 0.434524] pci 0000:01:00.1: reg 0x10: [mem 0xf1040000-0xf10400ff 64bit] [ 0.434660] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.445316] pci 0000:00:02.2: PCI bridge to [bus 01-04] [ 0.445327] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff] [ 0.445333] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff] [ 0.445340] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.445543] pci 0000:05:00.0: [168c:0036] type 00 class 0x028000 [ 0.445584] pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf017ffff 64bit] [ 0.445636] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 0.445742] pci 0000:05:00.0: supports D1 D2 [ 0.445746] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.457293] pci 0000:00:02.3: PCI bridge to [bus 05] [ 0.457308] pci 0000:00:02.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.460417] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.460714] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.461024] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.461435] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.461695] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.461886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.462077] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.462268] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.462946] ACPI: EC: interrupt unblocked [ 0.462962] ACPI: EC: event unblocked [ 0.462972] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.462977] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions and events [ 0.465254] iommu: Default domain type: Translated [ 0.465800] SCSI subsystem initialized [ 0.465838] libata version 3.00 loaded. [ 0.465838] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.465838] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.465838] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.465838] vgaarb: loaded [ 0.465838] ACPI: bus type USB registered [ 0.465838] usbcore: registered new interface driver usbfs [ 0.465838] usbcore: registered new interface driver hub [ 0.465838] usbcore: registered new device driver usb [ 0.465838] pps_core: LinuxPPS API ver. 1 registered [ 0.465838] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.465838] PTP clock support registered [ 0.465838] EDAC MC: Ver: 3.0.0 [ 0.465838] Registered efivars operations [ 0.465838] PCI: Using ACPI for IRQ routing [ 0.466978] PCI: pci_cache_line_size set to 64 bytes [ 0.467060] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff] [ 0.467063] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] [ 0.467065] e820: reserve RAM buffer [mem 0xb46c0018-0xb7ffffff] [ 0.467068] e820: reserve RAM buffer [mem 0xb4b1f000-0xb7ffffff] [ 0.467070] e820: reserve RAM buffer [mem 0xb537c000-0xb7ffffff] [ 0.467072] e820: reserve RAM buffer [mem 0xbc3e0000-0xbfffffff] [ 0.467075] e820: reserve RAM buffer [mem 0xbf17f000-0xbfffffff] [ 0.467078] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff] [ 0.467080] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] [ 0.469194] NetLabel: Initializing [ 0.469194] NetLabel: domain hash size = 128 [ 0.469194] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.469194] NetLabel: unlabeled traffic allowed by default [ 0.469341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.469349] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.469349] clocksource: Switched to clocksource tsc-early [ 0.503918] *** VALIDATE bpf *** [ 0.504133] VFS: Disk quotas dquot_6.6.0 [ 0.504174] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.504240] *** VALIDATE ramfs *** [ 0.504249] *** VALIDATE hugetlbfs *** [ 0.504508] AppArmor: AppArmor Filesystem Enabled [ 0.504602] pnp: PnP ACPI init [ 0.505120] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.505126] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.505140] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.505581] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.505714] system 00:02: [io 0x0400-0x04cf] has been reserved [ 0.505718] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.505722] system 00:02: [io 0x04d6] has been reserved [ 0.505725] system 00:02: [io 0x0680-0x06ff] has been reserved [ 0.505729] system 00:02: [io 0x077a] has been reserved [ 0.505733] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.505736] system 00:02: [io 0x0c14] has been reserved [ 0.505740] system 00:02: [io 0x0c50-0x0c52] has been reserved [ 0.505743] system 00:02: [io 0x0c6c] has been reserved [ 0.505747] system 00:02: [io 0x0c6f] has been reserved [ 0.505751] system 00:02: [io 0x0cd0-0x0cdb] could not be reserved [ 0.505755] system 00:02: [io 0x0840-0x0847] has been reserved [ 0.505766] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.506006] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.506011] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.506021] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.506264] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.506398] pnp 00:05: Plug and Play ACPI device, IDs SYN1b74 SYN1b00 SYN0002 PNP0f13 (active) [ 0.508192] pnp: PnP ACPI: found 6 devices [ 0.512957] thermal_sys: Registered thermal governor 'fair_share' [ 0.512959] thermal_sys: Registered thermal governor 'bang_bang' [ 0.512961] thermal_sys: Registered thermal governor 'step_wise' [ 0.512962] thermal_sys: Registered thermal governor 'user_space' [ 0.512964] thermal_sys: Registered thermal governor 'power_allocator' [ 0.517479] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.517573] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with Reserved [mem 0xffc00000-0xffffffff] [ 0.517579] pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 0.517612] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0260000-0xf027ffff pref] [ 0.517619] pci 0000:00:02.2: PCI bridge to [bus 01-04] [ 0.517624] pci 0000:00:02.2: bridge window [io 0x2000-0x2fff] [ 0.517631] pci 0000:00:02.2: bridge window [mem 0xf1000000-0xf1ffffff] [ 0.517636] pci 0000:00:02.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.517645] pci 0000:05:00.0: BAR 6: assigned [mem 0xf0180000-0xf018ffff pref] [ 0.517649] pci 0000:00:02.3: PCI bridge to [bus 05] [ 0.517655] pci 0000:00:02.3: bridge window [mem 0xf0100000-0xf01fffff] [ 0.517667] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.517670] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.517674] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.517677] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.517680] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.517683] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.517686] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.517689] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.517691] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.517694] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.517697] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.517700] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.517703] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.517706] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.517709] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.517712] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff window] [ 0.517715] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window] [ 0.517718] pci_bus 0000:00: resource 21 [mem 0xfed45000-0xffffffff window] [ 0.517721] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.517724] pci_bus 0000:01: resource 1 [mem 0xf1000000-0xf1ffffff] [ 0.517727] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.517731] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff] [ 0.517988] NET: Registered protocol family 2 [ 0.518448] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.518542] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.518807] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.518942] TCP: Hash tables configured (established 32768 bind 32768) [ 0.519054] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.519099] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.519231] NET: Registered protocol family 1 [ 0.519249] NET: Registered protocol family 44 [ 0.519276] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.519289] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0 [ 0.540973] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6b0 took 18889 usecs [ 0.541327] pci 0000:00:12.2: PME# does not work under D3, disabling it [ 0.561013] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6b0 took 19199 usecs [ 0.561367] pci 0000:00:13.2: PME# does not work under D3, disabling it [ 0.561417] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag [ 0.561434] PCI: CLS 64 bytes, default 64 [ 0.561585] Trying to unpack rootfs image as initramfs... [ 1.876108] Freeing initrd memory: 39876K [ 1.876156] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.876159] software IO TLB: mapped [mem 0xb83e0000-0xbc3e0000] (64MB) [ 1.876278] amd_uncore: AMD NB counters detected [ 1.876284] amd_uncore: AMD LLC counters detected [ 1.876585] LVT offset 0 assigned for vector 0x400 [ 1.876662] perf: AMD IBS detected (0x000000ff) [ 1.876797] check: Scanning for low memory corruption every 60 seconds [ 1.877969] Initialise system trusted keyrings [ 1.877989] Key type blacklist registered [ 1.878098] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.882160] zbud: loaded [ 1.883115] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.883631] fuse: init (API version 7.31) [ 1.883677] *** VALIDATE fuse *** [ 1.883682] *** VALIDATE fuse *** [ 1.883925] Platform Keyring initialized [ 1.895052] Key type asymmetric registered [ 1.895055] Asymmetric key parser 'x509' registered [ 1.895074] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.895188] io scheduler mq-deadline registered [ 1.896356] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.896498] efifb: probing for efifb [ 1.896541] efifb: showing boot graphics [ 1.898839] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k [ 1.898841] efifb: mode is 1366x768x32, linelength=5632, pages=1 [ 1.898842] efifb: scrolling: redraw [ 1.898846] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.898987] fbcon: Deferring console take-over [ 1.898990] fb0: EFI VGA frame buffer device [ 1.899879] ACPI: AC Adapter [ADP1] (on-line) [ 1.899995] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.900049] ACPI: Power Button [PWRB] [ 1.900159] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.900244] ACPI: Lid Switch [LID0] [ 1.900326] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.900392] ACPI: Sleep Button [SLPB] [ 1.900475] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.900540] ACPI: Power Button [PWRF] [ 1.906447] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.906452] ACPI: Thermal Zone [TZS0] (47 C) [ 1.907376] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.907378] ACPI: Thermal Zone [TZS1] (29 C) [ 1.907836] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.909500] battery: ACPI: Battery Slot [BAT0] (battery present) [ 1.912711] Linux agpgart interface v0.103 [ 1.918694] loop: module loaded [ 1.919300] libphy: Fixed MDIO Bus: probed [ 1.919302] tun: Universal TUN/TAP device driver, 1.6 [ 1.919388] PPP generic driver version 2.4.2 [ 1.919566] VFIO - User Level meta-driver version: 0.3 [ 1.919778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.919785] ehci-pci: EHCI PCI platform driver [ 1.920148] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.920162] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.920170] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.920181] ehci-pci 0000:00:12.2: debug port 1 [ 1.920262] ehci-pci 0000:00:12.2: irq 17, io mem 0xf024c000 [ 1.933356] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.933512] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.933516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.933519] usb usb1: Product: EHCI Host Controller [ 1.933522] usb usb1: Manufacturer: Linux 5.4.0-47-generic ehci_hcd [ 1.933524] usb usb1: SerialNumber: ... [ 1.933874] hub 1-0:1.0: USB hub found [ 1.933904] hub 1-0:1.0: 4 ports detected [ 1.934551] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.934563] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.934571] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.934582] ehci-pci 0000:00:13.2: debug port 1 [ 1.934634] ehci-pci 0000:00:13.2: irq 17, io mem 0xf024a000 [ 1.949376] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.949551] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.949555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.949558] usb usb2: Product: EHCI Host Controller [ 1.949561] usb usb2: Manufacturer: Linux 5.4.0-47-generic ehci_hcd [ 1.949564] usb usb2: SerialNumber: ... [ 1.949906] hub 2-0:1.0: USB hub found [ 1.949925] hub 2-0:1.0: 4 ports detected [ 1.950381] ehci-platform: EHCI generic platform driver [ 1.950421] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.950428] ohci-pci: OHCI PCI platform driver [ 1.950741] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.950757] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.950813] ohci-pci 0000:00:12.0: irq 18, io mem 0xf024d000 [ 2.013497] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 2.013502] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.013506] usb usb3: Product: OHCI PCI host controller [ 2.013508] usb usb3: Manufacturer: Linux 5.4.0-47-generic ohci_hcd [ 2.013511] usb usb3: SerialNumber: ... [ 2.013906] hub 3-0:1.0: USB hub found [ 2.013927] hub 3-0:1.0: 4 ports detected [ 2.014549] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.014565] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 2.014625] ohci-pci 0000:00:13.0: irq 18, io mem 0xf024b000 [ 2.077499] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04 [ 2.077504] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.077507] usb usb4: Product: OHCI PCI host controller [ 2.077510] usb usb4: Manufacturer: Linux 5.4.0-47-generic ohci_hcd [ 2.077513] usb usb4: SerialNumber: ... [ 2.077930] hub 4-0:1.0: USB hub found [ 2.077951] hub 4-0:1.0: 4 ports detected [ 2.078426] ohci-platform: OHCI generic platform driver [ 2.078459] uhci_hcd: USB Universal Host Controller Interface driver [ 2.078800] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.078813] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 2.078999] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410 [ 2.079458] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 2.079462] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.079464] usb usb5: Product: xHCI Host Controller [ 2.079467] usb usb5: Manufacturer: Linux 5.4.0-47-generic xhci-hcd [ 2.079470] usb usb5: SerialNumber: ... [ 2.079716] hub 5-0:1.0: USB hub found [ 2.079736] hub 5-0:1.0: 2 ports detected [ 2.079998] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.080004] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 2.080011] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 2.082411] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.082478] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 2.082482] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.082484] usb usb6: Product: xHCI Host Controller [ 2.082487] usb usb6: Manufacturer: Linux 5.4.0-47-generic xhci-hcd [ 2.082490] usb usb6: SerialNumber: ... [ 2.082739] hub 6-0:1.0: USB hub found [ 2.082758] hub 6-0:1.0: 2 ports detected [ 2.083125] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.091151] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.091162] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.091506] mousedev: PS/2 mouse device common for all mice [ 2.091940] rtc_cmos 00:01: RTC can wake from S4 [ 2.092230] rtc_cmos 00:01: registered as rtc0 [ 2.092268] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.092284] i2c /dev entries driver [ 2.092385] device-mapper: uevent: version 1.0.3 [ 2.092540] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: XXX@XXX [ 2.092585] platform eisa.0: Probing EISA bus 0 [ 2.092589] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 2.092593] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 2.092596] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 2.092599] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 2.092602] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 2.092604] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 2.092607] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 2.092610] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 2.092613] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 2.092615] platform eisa.0: EISA: Detected 0 cards [ 2.092757] ledtrig-cpu: registered to indicate activity on CPUs [ 2.092763] EFI Variables Facility v0.08 2004-May-17 [ 2.100419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.121345] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending. [ 2.121415] drop_monitor: Initializing network drop monitor service [ 2.121876] NET: Registered protocol family 10 [ 2.131502] Segment Routing with IPv6 [ 2.131561] NET: Registered protocol family 17 [ 2.131659] Key type dns_resolver registered [ 2.132266] RAS: Correctable Errors collector initialized. [ 2.132273] microcode: microcode updated early to new patch_level=0x0700010f [ 2.132348] microcode: CPU0: patch_level=0x0700010f [ 2.132361] microcode: CPU1: patch_level=0x0700010f [ 2.132374] microcode: CPU2: patch_level=0x0700010f [ 2.132386] microcode: CPU3: patch_level=0x0700010f [ 2.132467] microcode: Microcode Update Driver: v2.2. [ 2.132478] IPI shorthand broadcast: enabled [ 2.132495] sched_clock: Marking stable (2131750262, 705758)->(3685117815, -1552661795) [ 2.132673] registered taskstats version 1 [ 2.132701] Loading compiled-in X.509 certificates [ 2.135027] Loaded X.509 cert 'Build time autogenerated kernel key: 2093e6a74e1dee62be74066ace6b1cd781ddeedf' [ 2.135110] zswap: loaded using pool lzo/zbud [ 2.135315] Key type ._fscrypt registered [ 2.135317] Key type .fscrypt registered [ 2.143942] Key type big_key registered [ 2.148063] Key type encrypted registered [ 2.148070] AppArmor: AppArmor sha1 policy hashing enabled [ 2.155917] integrity: Loading X.509 certificate: UEFI:db [ 2.156028] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 2.156030] integrity: Loading X.509 certificate: UEFI:db [ 2.156089] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 2.156091] integrity: Loading X.509 certificate: UEFI:db [ 2.157072] integrity: Loaded X.509 cert 'Wistron Secure Flash: 34988c042fea03ab4cf14666886666c5' [ 2.157074] integrity: Loading X.509 certificate: UEFI:db [ 2.157127] integrity: Loaded X.509 cert 'Acer: c4f0474ae6b5e67a509d99132f49a4ec13f7ac68' [ 2.163610] ima: No TPM chip found, activating TPM-bypass! [ 2.163632] ima: Allocated hash algorithm: sha1 [ 2.163648] ima: No architecture policies found [ 2.163679] evm: Initialising EVM extended attributes: [ 2.163680] evm: security.selinux [ 2.163681] evm: security.SMACK64 [ 2.163682] evm: security.SMACK64EXEC [ 2.163683] evm: security.SMACK64TRANSMUTE [ 2.163684] evm: security.SMACK64MMAP [ 2.163685] evm: security.apparmor [ 2.163686] evm: security.ima [ 2.163687] evm: security.capability [ 2.163689] evm: HMAC attrs: 0x1 [ 2.164857] PM: Magic number: 4:753:759 [ 2.165086] rtc_cmos 00:01: setting system clock to 2020-09-20T00:45:49 UTC (1600562749) [ 2.165436] acpi_cpufreq: overriding BIOS provided _PSD data [ 2.166129] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 2.169792] Freeing unused decrypted memory: 2040K [ 2.171147] Freeing unused kernel image memory: 2704K [ 2.189366] Write protecting the kernel read-only data: 22528k [ 2.190543] Freeing unused kernel image memory: 2008K [ 2.191173] Freeing unused kernel image memory: 1216K [ 2.223782] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.223789] Run /init as init process [ 2.289262] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.435870] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.436922] acpi device:00: registered as cooling_device4 [ 2.437055] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.446009] acpi PNP0C14:01: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:00) [ 2.468470] sdhci: Secure Digital Host Controller Interface driver [ 2.468473] sdhci: Copyright(c) Pierre Ossman [ 2.476052] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [XX:XX:XX:XX:XX:XX] [ 2.481743] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 2.481749] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.481752] usb 2-1: Product: SPCA2082 PC Camera [ 2.481755] usb 2-1: Manufacturer: SunplusIT Inc [ 2.483447] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20190816/utaddress-213) [ 2.483462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.487202] sdhci-pci 0000:01:00.1: SDHCI controller found [1969:3010] (rev 13) [ 2.488381] ahci 0000:00:11.0: version 3.0 [ 2.488747] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.488753] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 2.492522] scsi host0: ahci [ 2.495067] mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA [ 2.495421] scsi host1: ahci [ 2.495600] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100 irq 35 [ 2.495604] ata2: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e180 irq 35 [ 2.540902] alx 0000:01:00.0 enp1s0f0: renamed from eth0 [ 2.565242] usb 3-2: new full-speed USB device number 2 using ohci-pci [ 2.766305] usb 3-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 2.766311] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.766314] usb 3-2: Product: USB Receiver [ 2.766317] usb 3-2: Manufacturer: Logitech [ 2.780451] hidraw: raw HID events driver (C) Jiri Kosina [ 2.793000] usbcore: registered new interface driver usbhid [ 2.793003] usbhid: USB HID core driver [ 2.798419] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:046D:C534.0001/input/input8 [ 2.857724] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2/input0 [ 2.858633] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input9 [ 2.858917] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input10 [ 2.901381] tsc: Refined TSC clocksource calibration: 1497.191 MHz [ 2.901401] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1594c522ce2, max_idle_ns: 440795237962 ns [ 2.901438] clocksource: Switched to clocksource tsc [ 2.917679] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input11 [ 2.918003] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input1 [ 2.925364] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 2.969260] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.969897] ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133 [ 2.969900] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.970523] ata1.00: configured for UDMA/133 [ 2.970870] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5 [ 2.971323] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.971564] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.971568] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.971607] sd 0:0:0:0: [sda] Write Protect is off [ 2.971612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.971678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.973245] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.974755] ata2.00: ATAPI: MATSHITADVD-RAM UJ8E2Q, 1.00, max UDMA/133 [ 2.975854] ata2.00: configured for UDMA/133 [ 2.977085] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E2Q 1.00 PQ: 0 ANSI: 5 [ 2.981968] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2/input0 [ 3.047706] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.047711] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.069823] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.069994] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.085052] sda: sda1 sda2 [ 3.086125] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.142291] random: fast init done [ 3.142316] usb 4-2: New USB device found, idVendor=04ca, idProduct=300b, bcdDevice= 0.01 [ 3.142320] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.142599] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.142615] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.142655] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.170604] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2/input1 [ 3.236283] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 3.237187] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input14 [ 3.237472] hid-generic 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:12.0-2/input1:2 [ 3.297762] psmouse serio1: synaptics: queried max coordinates: x [..5722], y [..4816] [ 3.336372] psmouse serio1: synaptics: queried min coordinates: x [1226..], y [1130..] [ 3.397411] usb 2-1: USB disconnect, device number 2 [ 3.414068] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00273/0x240000/0xa2400/0x0, board id: 2729, fw id: 1454696 [ 3.446363] logitech-hidpp-device 0003:046D:4054.0003: HID++ 4.5 device connected. [ 3.464351] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 3.669376] usb 2-1: new high-speed USB device number 4 using ehci-pci [ 3.861863] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 3.861869] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.861872] usb 2-1: Product: SPCA2082 PC Camera [ 3.861875] usb 2-1: Manufacturer: SunplusIT Inc [ 3.984649] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/0003:046D:4054.0003/input/input18 [ 3.984993] logitech-hidpp-device 0003:046D:4054.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:12.0-2/input1:2 [ 4.065045] fbcon: Taking over console [ 4.065286] Console: switching to colour frame buffer device 170x48 [ 4.145848] usb 2-1: USB disconnect, device number 4 [ 4.290474] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.453355] usb 2-1: new high-speed USB device number 5 using ehci-pci [ 4.813372] usb 2-1: device descriptor read/64, error -71 [ 5.114039] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 5.114045] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.114049] usb 2-1: Product: SPCA2082 PC Camera [ 5.114052] usb 2-1: Manufacturer: SunplusIT Inc [ 6.067750] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.085748] systemd[1]: Detected architecture x86-64. [ 6.127018] systemd[1]: Set hostname to ... [ 6.163103] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 6.512115] random: crng init done [ 6.512120] random: 7 urandom warning(s) missed due to ratelimiting [ 8.913231] usb 2-1: USB disconnect, device number 5 [ 9.221363] usb 2-1: new high-speed USB device number 6 using ehci-pci [ 9.413955] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 9.413960] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 9.413963] usb 2-1: Product: SPCA2082 PC Camera [ 9.413966] usb 2-1: Manufacturer: SunplusIT Inc [ 9.515649] usb 2-1: USB disconnect, device number 6 [ 9.627647] systemd[1]: Set up automount ... [ 9.627772] systemd[1]: Reached target Remote File Systems. [ 9.628314] systemd[1]: Created slice User and Session Slice. [ 9.628356] systemd[1]: Reached target User and Group Name Lookups. [ 9.628746] systemd[1]: Created slice System Slice. [ 9.628935] systemd[1]: Listening on fsck to fsckd communication Socket. [ 9.629157] systemd[1]: Listening on Journal Socket. [ 9.812384] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.821361] usb 2-1: new high-speed USB device number 7 using ehci-pci [ 10.013737] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 10.013742] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 10.013745] usb 2-1: Product: SPCA2082 PC Camera [ 10.013747] usb 2-1: Manufacturer: SunplusIT Inc [ 10.192676] lp: driver loaded but no devices found [ 10.329259] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 10.334446] ppdev: user-space parallel port driver [ 10.369765] usb 2-1: USB disconnect, device number 7 [ 10.438101] systemd-journald[277]: Received request to flush runtime journal from PID 1 [ 10.677377] usb 2-1: new high-speed USB device number 8 using ehci-pci [ 10.869758] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 10.869764] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 10.869768] usb 2-1: Product: SPCA2082 PC Camera [ 10.869771] usb 2-1: Manufacturer: SunplusIT Inc [ 10.873457] usb 2-1: USB disconnect, device number 8 [ 11.161376] usb 2-1: new high-speed USB device number 9 using ehci-pci [ 11.353801] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 11.353807] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 11.353811] usb 2-1: Product: SPCA2082 PC Camera [ 11.353813] usb 2-1: Manufacturer: SunplusIT Inc [ 13.039934] usb 2-1: USB disconnect, device number 9 [ 13.345363] usb 2-1: new high-speed USB device number 10 using ehci-pci [ 13.550282] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 13.550289] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 13.550292] usb 2-1: Product: SPCA2082 PC Camera [ 13.550295] usb 2-1: Manufacturer: SunplusIT Inc [ 18.753369] mc: Linux media interface: v0.10 [ 18.798882] videodev: Linux video capture interface: v2.00 [ 18.854768] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 18.855469] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 19.094893] [drm] radeon kernel modesetting enabled. [ 19.094987] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff [ 19.094991] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0800000 -> 0xf0ffffff [ 19.094994] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xf0200000 -> 0xf023ffff [ 19.094998] checking generic (e0000000 420000) vs hw (e0000000 10000000) [ 19.094999] fb0: switching to radeondrmfb from EFI VGA [ 19.095245] Console: switching to colour dummy device 80x25 [ 19.095334] radeon 0000:00:01.0: vgaarb: deactivate vga console [ 19.095929] [drm] initializing kernel modesetting (KABINI 0x1002:0x9832 0x1025:0x076B 0x00). [ 19.095967] [drm] doorbell mmio base: 0xF0800000 [ 19.095969] [drm] doorbell mmio size: 8388608 [ 19.096020] ATOM BIOS: AMD [ 19.096093] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 19.096097] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF [ 19.096105] [drm] Detected VRAM RAM=512M, BAR=256M [ 19.096107] [drm] RAM width 128bits DDR [ 19.096277] [TTM] Zone kernel: Available graphics memory: 1726826 KiB [ 19.096279] [TTM] Initializing pool allocator [ 19.096294] [TTM] Initializing DMA pool allocator [ 19.096330] [drm] radeon: 512M of VRAM memory ready [ 19.096332] [drm] radeon: 2048M of GTT memory ready. [ 19.096348] [drm] Loading kabini Microcode [ 19.407223] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 19.407227] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 19.407228] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 19.411557] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 19.411562] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 19.411565] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 19.411733] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input19 [ 19.411901] usbcore: registered new interface driver uvcvideo [ 19.411903] USB Video Class driver (1.1.1) [ 19.473111] [drm] Internal thermal controller without fan control [ 19.474293] [drm] radeon: dpm initialized [ 19.495404] ath: phy0: WB335 2-ANT card detected [ 19.495409] ath: phy0: Set BT/WLAN RX diversity capability [ 19.502762] ath: phy0: Enable LNA combining [ 19.503885] ath: phy0: ASPM enabled: 0x42 [ 19.503889] ath: EEPROM regdomain: 0x65 [ 19.503890] ath: EEPROM indicates we should expect a direct regpair map [ 19.503894] ath: Country alpha2 being used: 00 [ 19.503895] ath: Regpair used: 0x65 [ 19.506461] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 19.507571] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffff9a6f80b00000, irq=37 [ 19.530044] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [ 19.583363] Bluetooth: Core ver 2.22 [ 19.583402] NET: Registered protocol family 31 [ 19.583404] Bluetooth: HCI device and connection manager initialized [ 19.583412] Bluetooth: HCI socket layer initialized [ 19.583416] Bluetooth: L2CAP socket layer initialized [ 19.583425] Bluetooth: SCO socket layer initialized [ 19.589933] [drm] Found VCE firmware/feedback version 40.2.2 / 15! [ 19.589971] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 19.633414] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000). [ 19.633631] radeon 0000:00:01.0: WB enabled [ 19.633662] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x000000006947a24a [ 19.633667] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x00000000be3b9396 [ 19.633671] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x0000000039be8540 [ 19.633674] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x00000000d1fb80dd [ 19.633678] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x000000004539a759 [ 19.634560] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x00000000e283c6e7 [ 19.634899] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x00000000ad2c00ed [ 19.634903] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x00000000c599d48a [ 19.634906] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 19.634907] [drm] Driver supports precise vblank timestamp query. [ 19.634990] radeon 0000:00:01.0: radeon: using MSI. [ 19.635032] [drm] radeon: irq initialized. [ 19.639230] [drm] ring test on 0 succeeded in 2 usecs [ 19.639325] [drm] ring test on 1 succeeded in 3 usecs [ 19.639349] [drm] ring test on 2 succeeded in 3 usecs [ 19.639579] [drm] ring test on 3 succeeded in 4 usecs [ 19.639588] [drm] ring test on 4 succeeded in 4 usecs [ 19.685351] [drm] ring test on 5 succeeded in 2 usecs [ 19.705240] [drm] UVD initialized successfully. [ 19.743689] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 19.758113] usbcore: registered new interface driver btusb [ 19.814518] [drm] ring test on 6 succeeded in 16 usecs [ 19.814533] [drm] ring test on 7 succeeded in 3 usecs [ 19.814534] [drm] VCE initialized successfully. [ 19.816229] [drm] ib test on ring 0 succeeded in 0 usecs [ 19.816392] [drm] ib test on ring 1 succeeded in 0 usecs [ 19.816550] [drm] ib test on ring 2 succeeded in 0 usecs [ 19.816712] [drm] ib test on ring 3 succeeded in 0 usecs [ 19.816870] [drm] ib test on ring 4 succeeded in 0 usecs [ 19.848182] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input20 [ 20.261180] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 20.261191] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 20.261214] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 20.261216] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 20.261219] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 20.261222] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1b [ 20.273124] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input21 [ 20.285463] usb 4-2: USB disconnect, device number 2 [ 20.286416] usbcore: registered new interface driver ath3k [ 20.341403] [drm] ib test on ring 5 succeeded [ 20.362116] [drm] ib test on ring 6 succeeded [ 20.362829] [drm] ib test on ring 7 succeeded [ 20.368641] [drm] radeon atom DIG backlight initialized [ 20.368645] [drm] Radeon Display Connectors [ 20.368646] [drm] Connector 0: [ 20.368648] [drm] eDP-1 [ 20.368649] [drm] HPD1 [ 20.368652] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 20.368653] [drm] Encoders: [ 20.368654] [drm] LCD1: INTERNAL_UNIPHY [ 20.368656] [drm] Connector 1: [ 20.368657] [drm] HDMI-A-1 [ 20.368657] [drm] HPD2 [ 20.368660] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 20.368661] [drm] Encoders: [ 20.368662] [drm] DFP1: INTERNAL_UNIPHY [ 20.368663] [drm] Connector 2: [ 20.368664] [drm] VGA-1 [ 20.368667] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc [ 20.368667] [drm] Encoders: [ 20.368669] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 20.945794] cryptd: max_cpu_qlen set to 1000 [ 21.035409] [drm] fb mappable at 0xE0731000 [ 21.035414] [drm] vram apper at 0xE0000000 [ 21.035416] [drm] size 4325376 [ 21.035417] [drm] fb depth is 24 [ 21.035418] [drm] pitch is 5632 [ 21.035635] fbcon: radeondrmfb (fb0) is primary device [ 21.035855] Console: switching to colour frame buffer device 170x48 [ 21.035913] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 21.062270] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0 [ 21.321347] usb 4-2: new full-speed USB device number 3 using ohci-pci [ 21.483994] AVX version of gcm_enc/dec engaged. [ 21.483998] AES CTR mode by8 optimization enabled [ 22.035872] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 22.035876] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 22.365819] [drm] amdgpu kernel modesetting enabled. [ 22.365997] CRAT table not found [ 22.366016] Virtual CRAT table created for CPU [ 22.366018] Parsing CRAT table with 1 nodes [ 22.366021] Creating topology SYSFS entries [ 22.366053] Topology: Add CPU node [ 22.366054] Finished initializing topology [ 23.154894] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 24.220548] kvm: disabled by bios [ 24.250711] kvm: disabled by bios [ 24.294715] kvm: disabled by bios [ 24.342152] MCE: In-kernel MCE decoding enabled. [ 24.342993] kvm: disabled by bios [ 24.346456] EDAC amd64: Node 0: DRAM ECC disabled. [ 24.346460] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 24.346460] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 24.346460] (Note that use of the override may cause unknown side effects.) [ 24.421926] EDAC amd64: Node 0: DRAM ECC disabled. [ 24.421931] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 24.421931] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 24.421931] (Note that use of the override may cause unknown side effects.) [ 24.465992] EDAC amd64: Node 0: DRAM ECC disabled. [ 24.465997] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 24.465997] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 24.465997] (Note that use of the override may cause unknown side effects.) [ 24.514122] EDAC amd64: Node 0: DRAM ECC disabled. [ 24.514126] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 24.514126] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 24.514126] (Note that use of the override may cause unknown side effects.) [ 26.692739] usb 4-2: New USB device found, idVendor=04ca, idProduct=300b, bcdDevice= 0.02 [ 26.692747] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 40.665233] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 40.665236] Bluetooth: BNEP filters: protocol multicast [ 40.665245] Bluetooth: BNEP socket layer initialized [ 41.823304] Lockdown: udisksd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 51.065417] wlp5s0: authenticate with XX:XX:XX:XX:XX:XX [ 51.079948] wlp5s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 51.084023] wlp5s0: authenticated [ 51.085378] wlp5s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 51.092010] wlp5s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x431 status=0 aid=5) [ 51.092145] wlp5s0: associated [ 51.143426] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready [ 63.284373] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 82.975895] Bluetooth: RFCOMM TTY layer initialized [ 82.975910] Bluetooth: RFCOMM socket layer initialized [ 82.975932] Bluetooth: RFCOMM ver 1.11 [ 85.527149] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [ 87.240865] rfkill: input handler disabled [ 156.560018] Lockdown: fwupd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 499.449858] usb 1-1: new high-speed USB device number 3 using ehci-pci [ 499.612433] usb 1-1: New USB device found, idVendor=0930, idProduct=1400, bcdDevice= 1.00 [ 499.612444] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 499.612451] usb 1-1: Product: TOSHIBA USB DRV [ 499.612456] usb 1-1: Manufacturer: TOSHIBA [ 499.612461] usb 1-1: SerialNumber: ... [ 499.708297] usb-storage 1-1:1.0: USB Mass Storage device detected [ 499.708632] scsi host2: usb-storage 1-1:1.0 [ 499.708871] usbcore: registered new interface driver usb-storage [ 499.729546] usbcore: registered new interface driver uas [ 501.953990] scsi 2:0:0:0: Direct-Access TOSHIBA TOSHIBA USB DRV PMAP PQ: 0 ANSI: 4 [ 501.954982] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 501.955903] sd 2:0:0:0: [sdb] 60555264 512-byte logical blocks: (31.0 GB/28.9 GiB) [ 501.957139] sd 2:0:0:0: [sdb] Write Protect is off [ 501.957148] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 501.958397] sd 2:0:0:0: [sdb] No Caching mode page found [ 501.958412] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 501.993288] sdb: sdb1 [ 501.998434] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 502.571327] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 645.195769] usb 1-1: USB disconnect, device number 3 [ 968.899468] usb 2-1: USB disconnect, device number 10 [ 968.900926] uvcvideo: Failed to resubmit video URB (-19). [ 968.904913] uvcvideo: Failed to resubmit video URB (-19). [ 968.908941] uvcvideo: Failed to resubmit video URB (-19). [ 968.912902] uvcvideo: Failed to resubmit video URB (-19). [ 968.916914] uvcvideo: Failed to resubmit video URB (-19). [ 969.228208] usb 2-1: new high-speed USB device number 12 using ehci-pci [ 969.792117] usb 2-1: device not accepting address 12, error -71 [ 970.456119] usb 4-1: new full-speed USB device number 4 using ohci-pci [ 970.645986] usb 4-1: not running at top speed; connect to a high speed hub [ 970.686973] usb 4-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 970.686978] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 970.686982] usb 4-1: Product: SPCA2082 PC Camera [ 970.686985] usb 4-1: Manufacturer: SunplusIT Inc [ 970.699017] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 970.699021] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 970.699022] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 970.706280] uvcvideo 4-1:1.0: Entity type for entity Extension 4 was not initialized! [ 970.706285] uvcvideo 4-1:1.0: Entity type for entity Processing 2 was not initialized! [ 970.706288] uvcvideo 4-1:1.0: Entity type for entity Camera 1 was not initialized! [ 970.706472] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/input/input22 [ 971.834300] usb 4-1: USB disconnect, device number 4 [ 972.352057] usb 2-1: new high-speed USB device number 14 using ehci-pci [ 972.544405] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 972.544411] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 972.544415] usb 2-1: Product: SPCA2082 PC Camera [ 972.544418] usb 2-1: Manufacturer: SunplusIT Inc [ 972.578240] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 972.578253] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 972.578254] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 972.594662] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 972.594674] uvcvideo: Failed to initialize the device (-5). [ 972.595147] usb 2-1: USB disconnect, device number 14 [ 972.864033] usb 2-1: new high-speed USB device number 15 using ehci-pci [ 973.056456] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 973.056462] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 973.056466] usb 2-1: Product: SPCA2082 PC Camera [ 973.056469] usb 2-1: Manufacturer: SunplusIT Inc [ 973.064019] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 973.064022] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 973.064023] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 973.068624] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 973.068630] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 973.068634] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 973.069703] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input23 [ 973.087909] usb 2-1: USB disconnect, device number 15 [ 973.424001] usb 2-1: new high-speed USB device number 16 using ehci-pci [ 974.083997] usb 4-1: new full-speed USB device number 5 using ohci-pci [ 974.273950] usb 4-1: not running at top speed; connect to a high speed hub [ 974.314989] usb 4-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 974.314993] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 974.314997] usb 4-1: Product: SPCA2082 PC Camera [ 974.315000] usb 4-1: Manufacturer: SunplusIT Inc [ 974.327027] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 974.327031] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 974.327032] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 974.333971] uvcvideo: Failed to query (129) UVC probe control : -62 (exp. 26). [ 974.333979] uvcvideo: Failed to initialize the device (-5). [ 974.334310] usb 4-1: USB disconnect, device number 5 [ 974.619975] usb 2-1: device descriptor read/64, error -71 [ 975.287959] usb 2-1: device not accepting address 16, error -71 [ 975.623936] usb 2-1: new high-speed USB device number 17 using ehci-pci [ 975.808464] usb 2-1: device descriptor read/all, error -71 [ 975.815934] usb usb2-port1: attempt power cycle [ 976.767909] usb 4-1: new full-speed USB device number 6 using ohci-pci [ 976.957956] usb 4-1: not running at top speed; connect to a high speed hub [ 976.998979] usb 4-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 976.998985] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 976.998988] usb 4-1: Product: SPCA2082 PC Camera [ 976.998991] usb 4-1: Manufacturer: SunplusIT Inc [ 977.011045] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 977.011050] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 977.011051] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 977.018546] uvcvideo 4-1:1.0: Entity type for entity Extension 4 was not initialized! [ 977.018553] uvcvideo 4-1:1.0: Entity type for entity Processing 2 was not initialized! [ 977.018556] uvcvideo 4-1:1.0: Entity type for entity Camera 1 was not initialized! [ 977.018836] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/input/input24 [ 977.035999] usb 4-1: USB disconnect, device number 6 [ 977.515856] usb 2-1: new high-speed USB device number 18 using ehci-pci [ 977.947843] usb 2-1: device not accepting address 18, error -71 [ 978.283861] usb 2-1: new high-speed USB device number 19 using ehci-pci [ 978.350012] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 978.350017] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 978.350021] usb 2-1: Product: SPCA2082 PC Camera [ 978.350023] usb 2-1: Manufacturer: SunplusIT Inc [ 978.356924] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 978.356927] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 978.356928] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 978.361569] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 978.361576] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 978.361580] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 978.361859] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input25 [ 979.177091] usb 2-1: USB disconnect, device number 19 [ 979.511809] usb 2-1: new high-speed USB device number 20 using ehci-pci [ 979.708201] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 979.708207] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 979.708210] usb 2-1: Product: SPCA2082 PC Camera [ 979.708213] usb 2-1: Manufacturer: SunplusIT Inc [ 979.742029] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 979.742033] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 979.742034] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 979.758448] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 979.758457] uvcvideo: Failed to initialize the device (-5). [ 979.758844] usb 2-1: USB disconnect, device number 20 [ 980.027823] usb 2-1: new high-speed USB device number 21 using ehci-pci [ 980.220130] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 980.220136] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 980.220140] usb 2-1: Product: SPCA2082 PC Camera [ 980.220143] usb 2-1: Manufacturer: SunplusIT Inc [ 980.240798] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 980.240802] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 980.240803] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 980.257249] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 980.257258] uvcvideo: Failed to initialize the device (-5). [ 980.257649] usb 2-1: USB disconnect, device number 21 [ 980.527785] usb 2-1: new high-speed USB device number 22 using ehci-pci [ 980.720188] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 980.720194] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 980.720197] usb 2-1: Product: SPCA2082 PC Camera [ 980.720200] usb 2-1: Manufacturer: SunplusIT Inc [ 980.726858] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 980.726861] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 980.726862] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 980.731077] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 980.731082] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 980.731086] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 980.731267] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input26 [ 981.012105] usb 2-1: USB disconnect, device number 22 [ 981.355741] usb 2-1: new high-speed USB device number 23 using ehci-pci [ 981.715755] usb 2-1: device descriptor read/64, error -71 [ 982.191700] usb 2-1: device descriptor read/64, error -71 [ 982.427748] usb 2-1: new high-speed USB device number 24 using ehci-pci [ 982.620074] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 982.620081] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 982.620084] usb 2-1: Product: SPCA2082 PC Camera [ 982.620087] usb 2-1: Manufacturer: SunplusIT Inc [ 982.626753] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 982.626757] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 982.626758] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 982.631307] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 982.631314] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 982.631318] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 982.631709] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input27 [ 983.255307] usb 2-1: USB disconnect, device number 24 [ 983.599703] usb 2-1: new high-speed USB device number 25 using ehci-pci [ 983.792028] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 983.792035] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 983.792038] usb 2-1: Product: SPCA2082 PC Camera [ 983.792041] usb 2-1: Manufacturer: SunplusIT Inc [ 983.798825] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 983.798829] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 983.798830] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 983.802990] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 983.802995] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 983.802999] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 983.803175] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input28 [ 984.703050] usb 2-1: USB disconnect, device number 25 [ 985.027679] usb 2-1: new high-speed USB device number 26 using ehci-pci [ 985.224266] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 985.224276] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 985.224283] usb 2-1: Product: SPCA2082 PC Camera [ 985.224288] usb 2-1: Manufacturer: SunplusIT Inc [ 985.261520] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 985.261526] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 985.261528] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 985.278859] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 985.278874] uvcvideo: Failed to initialize the device (-5). [ 985.279541] usb 2-1: USB disconnect, device number 26 [ 985.551666] usb 2-1: new high-speed USB device number 27 using ehci-pci [ 986.111746] usb 2-1: device not accepting address 27, error -71 [ 986.447727] usb 2-1: new high-speed USB device number 28 using ehci-pci [ 986.644190] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 986.644201] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 986.644207] usb 2-1: Product: SPCA2082 PC Camera [ 986.644212] usb 2-1: Manufacturer: SunplusIT Inc [ 986.679704] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 986.679710] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 986.679713] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 986.697430] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 986.697445] uvcvideo: Failed to initialize the device (-5). [ 986.698080] usb 2-1: USB disconnect, device number 28 [ 986.971598] usb 2-1: new high-speed USB device number 29 using ehci-pci [ 987.164158] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 987.164169] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 987.164175] usb 2-1: Product: SPCA2082 PC Camera [ 987.164180] usb 2-1: Manufacturer: SunplusIT Inc [ 987.172015] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 987.172021] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 987.172023] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 987.176500] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 987.176510] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 987.176517] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 987.176845] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input29 [ 987.465807] usb 2-1: USB disconnect, device number 29 [ 987.779570] usb 2-1: new high-speed USB device number 30 using ehci-pci [ 987.972110] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 987.972116] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 987.972119] usb 2-1: Product: SPCA2082 PC Camera [ 987.972122] usb 2-1: Manufacturer: SunplusIT Inc [ 988.005598] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 988.005602] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 988.005603] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 988.021980] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 988.021990] uvcvideo: Failed to initialize the device (-5). [ 988.022380] usb 2-1: USB disconnect, device number 30 [ 988.291721] usb 2-1: new high-speed USB device number 31 using ehci-pci [ 988.484365] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 988.484376] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 988.484383] usb 2-1: Product: SPCA2082 PC Camera [ 988.484388] usb 2-1: Manufacturer: SunplusIT Inc [ 988.521157] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 988.521164] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 988.521166] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 988.539004] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 988.539030] uvcvideo: Failed to initialize the device (-5). [ 988.539764] usb 2-1: USB disconnect, device number 31 [ 988.811665] usb 2-1: new high-speed USB device number 32 using ehci-pci [ 989.004158] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 989.004169] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 989.004175] usb 2-1: Product: SPCA2082 PC Camera [ 989.004180] usb 2-1: Manufacturer: SunplusIT Inc [ 989.039522] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 989.039528] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 989.039531] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 989.056486] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 989.056502] uvcvideo: Failed to initialize the device (-5). [ 989.057128] usb 2-1: USB disconnect, device number 32 [ 989.331652] usb 2-1: new high-speed USB device number 33 using ehci-pci [ 989.553685] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 989.553694] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 989.566024] usb 2-1: can't set config #1, error -71 [ 989.566396] usb 2-1: USB disconnect, device number 33 [ 989.871556] usb 2-1: new high-speed USB device number 34 using ehci-pci [ 990.231640] usb 2-1: device descriptor read/64, error -71 [ 990.703649] usb 2-1: device descriptor read/64, error -71 [ 991.471612] usb 4-1: new full-speed USB device number 7 using ohci-pci [ 991.661120] usb 4-1: not running at top speed; connect to a high speed hub [ 991.702134] usb 4-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 991.702145] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 991.702152] usb 4-1: Product: SPCA2082 PC Camera [ 991.702157] usb 4-1: Manufacturer: SunplusIT Inc [ 991.716130] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 991.716136] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 991.716138] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 991.723705] uvcvideo 4-1:1.0: Entity type for entity Extension 4 was not initialized! [ 991.723716] uvcvideo 4-1:1.0: Entity type for entity Processing 2 was not initialized! [ 991.723723] uvcvideo 4-1:1.0: Entity type for entity Camera 1 was not initialized! [ 991.724081] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/input/input30 [ 992.632170] usb 4-1: USB disconnect, device number 7 [ 993.655362] usb 2-1: new high-speed USB device number 36 using ehci-pci [ 993.847838] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 993.847848] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 993.847854] usb 2-1: Product: SPCA2082 PC Camera [ 993.847860] usb 2-1: Manufacturer: SunplusIT Inc [ 993.883684] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 993.883690] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 993.883692] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 993.901080] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 993.901095] uvcvideo: Failed to initialize the device (-5). [ 993.901727] usb 2-1: USB disconnect, device number 36 [ 994.171518] usb 2-1: new high-speed USB device number 37 using ehci-pci [ 994.363813] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 994.363823] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 994.363830] usb 2-1: Product: SPCA2082 PC Camera [ 994.363835] usb 2-1: Manufacturer: SunplusIT Inc [ 994.375468] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 994.375474] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 994.375475] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 994.380484] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 994.380492] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 994.380497] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 994.380730] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input31 [ 3228.127100] usb 2-1: USB disconnect, device number 37 [ 3228.443103] usb 2-1: new high-speed USB device number 38 using ehci-pci [ 3228.639545] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 3228.639552] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3228.639556] usb 2-1: Product: SPCA2082 PC Camera [ 3228.639559] usb 2-1: Manufacturer: SunplusIT Inc [ 3228.649786] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 3228.649791] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 3228.649793] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 3228.654219] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 3228.654228] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 3228.654233] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 3228.654468] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input32 [ 3228.931933] usb 2-1: USB disconnect, device number 38 [ 3229.243059] usb 2-1: new high-speed USB device number 39 using ehci-pci [ 3229.807102] usb 2-1: device not accepting address 39, error -71 [ 3230.143134] usb 2-1: new high-speed USB device number 40 using ehci-pci [ 3230.503077] usb 2-1: device descriptor read/64, error -71 [ 3230.803816] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 3230.803827] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3230.803834] usb 2-1: Product: SPCA2082 PC Camera [ 3230.803839] usb 2-1: Manufacturer: SunplusIT Inc [ 3230.828273] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 3230.828279] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 3230.828281] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 3230.846297] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 3230.846312] uvcvideo: Failed to initialize the device (-5). [ 3230.846936] usb 2-1: USB disconnect, device number 40 [ 3231.123146] usb 2-1: new high-speed USB device number 41 using ehci-pci [ 3231.315738] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 3231.315748] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3231.315755] usb 2-1: Product: SPCA2082 PC Camera [ 3231.315760] usb 2-1: Manufacturer: SunplusIT Inc [ 3231.323435] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 3231.323441] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 3231.323443] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 3231.333354] uvcvideo: Failed to query (129) UVC probe control : -71 (exp. 26). [ 3231.333370] uvcvideo: Failed to initialize the device (-5). [ 3231.334071] usb 2-1: USB disconnect, device number 41 [ 3231.603153] usb 2-1: new high-speed USB device number 42 using ehci-pci [ 3231.795783] usb 2-1: New USB device found, idVendor=1bcf, idProduct=2082, bcdDevice= 1.00 [ 3231.795793] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3231.795800] usb 2-1: Product: SPCA2082 PC Camera [ 3231.795805] usb 2-1: Manufacturer: SunplusIT Inc [ 3231.803503] uvcvideo: Found UVC 1.00 device SPCA2082 PC Camera (1bcf:2082) [ 3231.803510] uvcvideo: Forcing device quirks to 0x100 by module parameter for testing purpose. [ 3231.803512] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list. [ 3231.808080] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 3231.808091] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 3231.808097] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 3231.808418] input: SPCA2082 PC Camera : SPCA2082 P as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input33