Probe #d25972e4e0 of Multilaser MLX11 EDUC

Log: dmesg

[ 0.700912] ACPI: Added _OSI(Processor Device) [ 0.700914] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.700917] ACPI: Added _OSI(Processor Aggregator Device) [ 0.700920] ACPI: Added _OSI(Linux-Dell-Video) [ 0.700923] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.700925] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.736958] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.746573] ACPI: Dynamic OEM Table Load: [ 0.746591] ACPI: SSDT 0xFFFF9A6C3A892600 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.750498] ACPI: Dynamic OEM Table Load: [ 0.750512] ACPI: SSDT 0xFFFF9A6C3A893E00 00015F (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.753571] ACPI: Dynamic OEM Table Load: [ 0.753584] ACPI: SSDT 0xFFFF9A6C3B2FC3C0 00008D (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.757942] ACPI: EC: EC started [ 0.757945] ACPI: EC: interrupt blocked [ 0.944165] ACPI: \_SB_.PCI0.SBRG.H_EC: Used as first EC [ 0.944171] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x2a, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.944175] ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions [ 0.944177] ACPI: Interpreter enabled [ 0.944257] ACPI: (supports S0 S3 S4 S5) [ 0.944261] ACPI: Using IOAPIC for interrupt routing [ 0.944382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.945787] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.967753] ACPI: Power Resource [SDPR] (on) [ 0.981152] ACPI: Power Resource [PXP] (off) [ 0.982607] ACPI: Power Resource [PXP] (off) [ 0.984044] ACPI: Power Resource [PXP] (off) [ 0.985479] ACPI: Power Resource [PXP] (off) [ 0.986925] ACPI: Power Resource [PXP] (off) [ 0.988360] ACPI: Power Resource [PXP] (off) [ 1.000017] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.000035] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.003210] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 1.006214] PCI host bridge to bus 0000:00 [ 1.006221] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 1.006225] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 1.006229] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 1.006233] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.006237] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] [ 1.006240] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window] [ 1.006244] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] [ 1.006247] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] [ 1.006252] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.006282] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000 [ 1.007320] pci 0000:00:00.1: [8086:5a8c] type 00 class 0x118000 [ 1.007374] pci 0000:00:00.1: reg 0x10: [mem 0x91310000-0x91317fff 64bit] [ 1.008454] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000 [ 1.008483] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 1.008499] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 1.008510] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 1.008550] pci 0000:00:02.0: BAR 2: assigned to efifb [ 1.009620] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380 [ 1.009669] pci 0000:00:0e.0: reg 0x10: [mem 0x91318000-0x9131bfff 64bit] [ 1.009701] pci 0000:00:0e.0: reg 0x20: [mem 0x91000000-0x910fffff 64bit] [ 1.009803] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold [ 1.010940] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000 [ 1.010995] pci 0000:00:0f.0: reg 0x10: [mem 0x91345000-0x91345fff 64bit] [ 1.011160] pci 0000:00:0f.0: PME# supported from D3hot [ 1.012111] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601 [ 1.012146] pci 0000:00:12.0: reg 0x10: [mem 0x9131c000-0x9131dfff] [ 1.012159] pci 0000:00:12.0: reg 0x14: [mem 0x91342000-0x913420ff] [ 1.012171] pci 0000:00:12.0: reg 0x18: [io 0xf090-0xf097] [ 1.012183] pci 0000:00:12.0: reg 0x1c: [io 0xf080-0xf083] [ 1.012195] pci 0000:00:12.0: reg 0x20: [io 0xf060-0xf07f] [ 1.012208] pci 0000:00:12.0: reg 0x24: [mem 0x91341000-0x913417ff] [ 1.012297] pci 0000:00:12.0: PME# supported from D3hot [ 1.013209] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400 [ 1.013343] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold [ 1.014323] pci 0000:00:13.1: [8086:5ad9] type 01 class 0x060400 [ 1.014454] pci 0000:00:13.1: PME# supported from D0 D3hot D3cold [ 1.015412] pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400 [ 1.015542] pci 0000:00:13.2: PME# supported from D0 D3hot D3cold [ 1.016538] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330 [ 1.016577] pci 0000:00:15.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit] [ 1.016690] pci 0000:00:15.0: PME# supported from D3hot D3cold [ 1.017668] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000 [ 1.017709] pci 0000:00:16.0: reg 0x10: [mem 0x91340000-0x91340fff 64bit] [ 1.017731] pci 0000:00:16.0: reg 0x18: [mem 0x9133f000-0x9133ffff 64bit] [ 1.018753] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000 [ 1.018798] pci 0000:00:16.1: reg 0x10: [mem 0x9133e000-0x9133efff 64bit] [ 1.018820] pci 0000:00:16.1: reg 0x18: [mem 0x9133d000-0x9133dfff 64bit] [ 1.019816] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000 [ 1.019861] pci 0000:00:16.2: reg 0x10: [mem 0x9133c000-0x9133cfff 64bit] [ 1.019883] pci 0000:00:16.2: reg 0x18: [mem 0x9133b000-0x9133bfff 64bit] [ 1.020891] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000 [ 1.020936] pci 0000:00:16.3: reg 0x10: [mem 0x9133a000-0x9133afff 64bit] [ 1.020957] pci 0000:00:16.3: reg 0x18: [mem 0x91339000-0x91339fff 64bit] [ 1.021974] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000 [ 1.022019] pci 0000:00:17.0: reg 0x10: [mem 0x91338000-0x91338fff 64bit] [ 1.022039] pci 0000:00:17.0: reg 0x18: [mem 0x91337000-0x91337fff 64bit] [ 1.023073] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000 [ 1.023118] pci 0000:00:17.1: reg 0x10: [mem 0x91336000-0x91336fff 64bit] [ 1.023139] pci 0000:00:17.1: reg 0x18: [mem 0x91335000-0x91335fff 64bit] [ 1.024160] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000 [ 1.024204] pci 0000:00:17.2: reg 0x10: [mem 0x91334000-0x91334fff 64bit] [ 1.024225] pci 0000:00:17.2: reg 0x18: [mem 0x91333000-0x91333fff 64bit] [ 1.025223] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000 [ 1.025268] pci 0000:00:17.3: reg 0x10: [mem 0x91332000-0x91332fff 64bit] [ 1.025289] pci 0000:00:17.3: reg 0x18: [mem 0x91331000-0x91331fff 64bit] [ 1.026308] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000 [ 1.026353] pci 0000:00:18.0: reg 0x10: [mem 0x91330000-0x91330fff 64bit] [ 1.026374] pci 0000:00:18.0: reg 0x18: [mem 0x9132f000-0x9132ffff 64bit] [ 1.027375] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000 [ 1.027419] pci 0000:00:18.1: reg 0x10: [mem 0x9132e000-0x9132efff 64bit] [ 1.027439] pci 0000:00:18.1: reg 0x18: [mem 0x9132d000-0x9132dfff 64bit] [ 1.028458] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000 [ 1.028501] pci 0000:00:18.2: reg 0x10: [mem 0xfea10000-0xfea10fff 64bit] [ 1.028521] pci 0000:00:18.2: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.029529] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000 [ 1.029588] pci 0000:00:18.3: reg 0x10: [mem 0x9132c000-0x9132cfff 64bit] [ 1.029608] pci 0000:00:18.3: reg 0x18: [mem 0x9132b000-0x9132bfff 64bit] [ 1.030636] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000 [ 1.030680] pci 0000:00:19.0: reg 0x10: [mem 0x9132a000-0x9132afff 64bit] [ 1.030700] pci 0000:00:19.0: reg 0x18: [mem 0x91329000-0x91329fff 64bit] [ 1.031718] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000 [ 1.031761] pci 0000:00:19.1: reg 0x10: [mem 0x91328000-0x91328fff 64bit] [ 1.031781] pci 0000:00:19.1: reg 0x18: [mem 0x91327000-0x91327fff 64bit] [ 1.032788] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000 [ 1.032833] pci 0000:00:19.2: reg 0x10: [mem 0x91326000-0x91326fff 64bit] [ 1.032856] pci 0000:00:19.2: reg 0x18: [mem 0x91325000-0x91325fff 64bit] [ 1.033884] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501 [ 1.033926] pci 0000:00:1b.0: reg 0x10: [mem 0x91324000-0x91324fff 64bit] [ 1.033941] pci 0000:00:1b.0: reg 0x18: [mem 0x91323000-0x91323fff 64bit] [ 1.035040] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501 [ 1.035077] pci 0000:00:1c.0: reg 0x10: [mem 0x91322000-0x91322fff 64bit] [ 1.035096] pci 0000:00:1c.0: reg 0x18: [mem 0x91321000-0x91321fff 64bit] [ 1.036173] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501 [ 1.036210] pci 0000:00:1e.0: reg 0x10: [mem 0x91320000-0x91320fff 64bit] [ 1.036227] pci 0000:00:1e.0: reg 0x18: [mem 0x9131f000-0x9131ffff 64bit] [ 1.037215] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100 [ 1.038391] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500 [ 1.038469] pci 0000:00:1f.1: reg 0x10: [mem 0x9131e000-0x9131e0ff 64bit] [ 1.038554] pci 0000:00:1f.1: reg 0x20: [io 0xf040-0xf05f] [ 1.039628] pci 0000:00:13.0: PCI bridge to [bus 01] [ 1.040123] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000 [ 1.040440] pci 0000:02:00.0: reg 0x10: [mem 0x91200000-0x91201fff 64bit] [ 1.041067] pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256) [ 1.041224] pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128) [ 1.041990] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.043236] pci 0000:00:13.1: PCI bridge to [bus 02] [ 1.043246] pci 0000:00:13.1: bridge window [mem 0x91200000-0x912fffff] [ 1.043395] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 1.043439] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 1.043495] pci 0000:03:00.0: reg 0x18: [mem 0x91104000-0x91104fff 64bit] [ 1.043522] pci 0000:03:00.0: reg 0x20: [mem 0x91100000-0x91103fff 64bit] [ 1.043551] pci 0000:03:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256) [ 1.043561] pci 0000:03:00.0: Max Payload Size set to 128 (was 128, max 128) [ 1.043688] pci 0000:03:00.0: supports D1 D2 [ 1.043692] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.043974] pci 0000:00:13.2: PCI bridge to [bus 03] [ 1.043981] pci 0000:00:13.2: bridge window [io 0xe000-0xefff] [ 1.043988] pci 0000:00:13.2: bridge window [mem 0x91100000-0x911fffff] [ 1.048017] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 1.048289] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 1.048558] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 1.048826] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 1.049096] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 1.049365] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 1.049636] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 1.049905] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. [ 1.057221] ACPI: EC: interrupt unblocked [ 1.057221] ACPI: EC: event unblocked [ 1.057221] ACPI: \_SB_.PCI0.SBRG.H_EC: GPE=0x2a, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 1.057221] ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions and events [ 1.057221] iommu: Default domain type: Translated [ 1.057221] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.057221] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.057221] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.057221] vgaarb: loaded [ 1.057297] ACPI: bus type USB registered [ 1.057332] usbcore: registered new interface driver usbfs [ 1.057369] usbcore: registered new interface driver hub [ 1.057414] usbcore: registered new device driver usb [ 1.057485] pps_core: LinuxPPS API ver. 1 registered [ 1.057488] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 1.057494] PTP clock support registered [ 1.057518] EDAC MC: Ver: 3.0.0 [ 1.060650] Registered efivars operations [ 1.063976] PCI: Using ACPI for IRQ routing [ 1.093388] PCI: pci_cache_line_size set to 64 bytes [ 1.093623] pci 0000:00:18.2: can't claim BAR 0 [mem 0xfea10000-0xfea10fff 64bit]: no compatible bridge window [ 1.093884] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 1.093892] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 1.093895] e820: reserve RAM buffer [mem 0x73fb2000-0x73ffffff] [ 1.093897] e820: reserve RAM buffer [mem 0x7598f000-0x77ffffff] [ 1.093899] e820: reserve RAM buffer [mem 0x768c5000-0x77ffffff] [ 1.093902] e820: reserve RAM buffer [mem 0x7a15b000-0x7bffffff] [ 1.093905] e820: reserve RAM buffer [mem 0x7a776000-0x7bffffff] [ 1.093907] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff] [ 1.094183] NetLabel: Initializing [ 1.094185] NetLabel: domain hash size = 128 [ 1.094187] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.094223] NetLabel: unlabeled traffic allowed by default [ 1.096134] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.096148] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 1.100553] clocksource: Switched to clocksource tsc-early [ 1.140424] *** VALIDATE bpf *** [ 1.140610] VFS: Disk quotas dquot_6.6.0 [ 1.140653] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.140736] *** VALIDATE ramfs *** [ 1.140752] *** VALIDATE hugetlbfs *** [ 1.140888] pnp: PnP ACPI init [ 1.141888] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.142010] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.142394] system 00:02: [io 0x06a4] has been reserved [ 1.142399] system 00:02: [io 0x06a0] has been reserved [ 1.142413] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.142762] system 00:03: [io 0x0680-0x069f] has been reserved [ 1.142768] system 00:03: [io 0x0400-0x047f] could not be reserved [ 1.142772] system 00:03: [io 0x0500-0x05fe] has been reserved [ 1.142776] system 00:03: [io 0x0600-0x061f] has been reserved [ 1.142781] system 00:03: [io 0x164e-0x164f] has been reserved [ 1.142794] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.143837] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved [ 1.143843] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved [ 1.143847] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.143851] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.143856] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved [ 1.143860] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved [ 1.143864] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved [ 1.143868] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.143873] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.143918] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.144825] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.145534] pnp: PnP ACPI: found 6 devices [ 1.150712] thermal_sys: Registered thermal governor 'fair_share' [ 1.150715] thermal_sys: Registered thermal governor 'bang_bang' [ 1.150718] thermal_sys: Registered thermal governor 'step_wise' [ 1.150720] thermal_sys: Registered thermal governor 'user_space' [ 1.150722] thermal_sys: Registered thermal governor 'power_allocator' [ 1.155271] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.155419] pci 0000:00:18.2: BAR 0: assigned [mem 0x91343000-0x91343fff 64bit] [ 1.155450] pci 0000:00:18.2: BAR 2: assigned [mem 0x91344000-0x91344fff 64bit] [ 1.155469] pci 0000:00:13.0: PCI bridge to [bus 01] [ 1.155485] pci 0000:00:13.1: PCI bridge to [bus 02] [ 1.155493] pci 0000:00:13.1: bridge window [mem 0x91200000-0x912fffff] [ 1.155503] pci 0000:00:13.2: PCI bridge to [bus 03] [ 1.155509] pci 0000:00:13.2: bridge window [io 0xe000-0xefff] [ 1.155516] pci 0000:00:13.2: bridge window [mem 0x91100000-0x911fffff] [ 1.155530] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 1.155534] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 1.155538] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 1.155541] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.155545] pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window] [ 1.155549] pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window] [ 1.155553] pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window] [ 1.155557] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window] [ 1.155563] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff] [ 1.155567] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 1.155571] pci_bus 0000:03: resource 1 [mem 0x91100000-0x911fffff] [ 1.156009] NET: Registered protocol family 2 [ 1.156432] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.156538] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.156881] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 1.157273] TCP: Hash tables configured (established 32768 bind 32768) [ 1.157408] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.157495] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.157829] NET: Registered protocol family 1 [ 1.157843] NET: Registered protocol family 44 [ 1.157881] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.158945] PCI: CLS 0 bytes, default 64 [ 1.159104] Trying to unpack rootfs image as initramfs... [ 1.514193] Freeing initrd memory: 11636K [ 1.514200] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.514204] software IO TLB: mapped [mem 0x6d70a000-0x7170a000] (64MB) [ 1.514295] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns [ 1.514332] clocksource: Switched to clocksource tsc [ 1.514535] check: Scanning for low memory corruption every 60 seconds [ 1.515637] Initialise system trusted keyrings [ 1.515666] Key type blacklist registered [ 1.515811] workingset: timestamp_bits=41 max_order=20 bucket_order=0 [ 1.519855] zbud: loaded [ 1.531831] Key type asymmetric registered [ 1.531836] Asymmetric key parser 'x509' registered [ 1.531864] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.531994] io scheduler mq-deadline registered [ 1.531998] io scheduler kyber registered [ 1.532083] io scheduler bfq registered [ 1.533163] pcieport 0000:00:13.0: PME: Signaling with IRQ 120 [ 1.533734] pcieport 0000:00:13.1: PME: Signaling with IRQ 121 [ 1.534286] pcieport 0000:00:13.2: PME: Signaling with IRQ 122 [ 1.534444] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.534716] efifb: probing for efifb [ 1.534772] efifb: Ignoring BGRT: unexpected or invalid BMP data [ 1.534775] efifb: framebuffer at 0x80000000, using 3072k, total 3072k [ 1.534778] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.534780] efifb: scrolling: redraw [ 1.534783] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.534911] fbcon: Deferring console take-over [ 1.534915] fb0: EFI VGA frame buffer device [ 1.534940] intel_idle: Please enable MWAIT in BIOS SETUP [ 1.535106] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.535167] ACPI: Sleep Button [SLPB] [ 1.535285] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.535341] ACPI: Lid Switch [LID0] [ 1.535430] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.535483] ACPI: Power Button [PWRB] [ 1.539904] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.539909] ACPI: Thermal Zone [TZ01] (27 C) [ 1.540542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.541810] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <XXX@XXX> [ 1.541813] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 1.543114] usbcore: registered new interface driver usbserial_generic [ 1.543134] usbserial: USB Serial support registered for generic [ 1.543194] rtc_cmos 00:05: RTC can wake from S4 [ 1.543856] rtc_cmos 00:05: registered as rtc0 [ 1.543923] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.544097] intel_pstate: Intel P-state driver initializing [ 1.544574] ledtrig-cpu: registered to indicate activity on CPUs [ 1.545083] drop_monitor: Initializing network drop monitor service [ 1.545759] NET: Registered protocol family 10 [ 1.565723] Segment Routing with IPv6 [ 1.565761] NET: Registered protocol family 17 [ 1.569975] RAS: Correctable Errors collector initialized. [ 1.570124] microcode: sig=0x506c9, pf=0x1, revision=0x3c [ 1.570210] microcode: Microcode Update Driver: v2.2. [ 1.570473] *** VALIDATE rdt *** [ 1.570494] resctrl: L2 allocation detected [ 1.570502] IPI shorthand broadcast: enabled [ 1.570525] sched_clock: Marking stable (1569479551, 914860)->(1573869754, -3475343) [ 1.570738] registered taskstats version 1 [ 1.570753] Loading compiled-in X.509 certificates [ 1.580066] Loaded X.509 cert 'Build time autogenerated kernel key: b40fbb4f6172ea4048b8d1bd2be6906112fb7bea' [ 1.580132] zswap: loaded using pool lzo/zbud [ 1.583984] Key type ._fscrypt registered [ 1.583987] Key type .fscrypt registered [ 1.600352] Key type big_key registered [ 1.601285] PM: Magic number: 4:858:544 [ 1.601592] rtc_cmos 00:05: setting system clock to 2020-01-20T18:31:28 UTC (1579545088) [ 1.607038] Freeing unused decrypted memory: 2040K [ 1.607796] Freeing unused kernel image memory: 1656K [ 1.634264] Write protecting the kernel read-only data: 18432k [ 1.635705] Freeing unused kernel image memory: 2012K [ 1.661869] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.661872] Run /init as init process [ 1.927434] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.927436] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.930162] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.957324] SCSI subsystem initialized [ 1.967239] libata version 3.00 loaded. [ 1.972477] ahci 0000:00:12.0: version 3.0 [ 1.976107] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.976117] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 1.977209] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.977215] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported [ 1.977504] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.977506] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.977508] usb usb1: Product: xHCI Host Controller [ 1.977510] usb usb1: Manufacturer: Linux 5.4.13-3-MANJARO xhci-hcd [ 1.977512] usb usb1: SerialNumber: ... [ 1.977716] sdhci: Secure Digital Host Controller Interface driver [ 1.977719] sdhci: Copyright(c) Pierre Ossman [ 1.977757] hub 1-0:1.0: USB hub found [ 1.977775] hub 1-0:1.0: 8 ports detected [ 1.978769] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 1.978780] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 1.978785] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed [ 1.978849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 1.978851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.978853] usb usb2: Product: xHCI Host Controller [ 1.978855] usb usb2: Manufacturer: Linux 5.4.13-3-MANJARO xhci-hcd [ 1.978857] usb usb2: SerialNumber: ... [ 1.979005] hub 2-0:1.0: USB hub found [ 1.979021] hub 2-0:1.0: 7 ports detected [ 1.979210] usb: port power management may be unreliable [ 1.982908] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.982913] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst [ 1.983605] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev b) [ 1.983619] sdhci-pci 0000:00:1b.0: enabling device (0000 -> 0002) [ 1.987550] scsi host0: ahci [ 1.987733] ata1: SATA max UDMA/133 abar m2048@0x91341000 port 0x91341100 irq 123 [ 1.997933] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit [ 1.998043] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b) [ 2.001178] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit [ 2.001281] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b) [ 2.001294] sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002) [ 2.028024] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit [ 2.047386] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.307425] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 2.454051] usb 1-1: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [ 2.454060] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.454065] usb 1-1: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [ 2.454070] usb 1-1: Manufacturer: DigitalPersona, Inc. [ 2.454075] usb 1-1: SerialNumber: ... [ 2.457422] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.512633] ata1.00: ATA-8: TOSHIBA MQ01ABF050M, AM0P2A, max UDMA/100 [ 2.512642] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.515181] ata1.00: configured for UDMA/100 [ 2.516054] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 2A PQ: 0 ANSI: 5 [ 2.529316] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.529319] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.529338] sd 0:0:0:0: [sda] Write Protect is off [ 2.529340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.529385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.577455] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 2.630053] sda: sda1 sda2 sda3 [ 2.631503] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.719089] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 2.719097] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.844131] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 2.943641] usb 1-6: New USB device found, idVendor=2d27, idProduct=18e7, bcdDevice= 0.06 [ 2.943649] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.943654] usb 1-6: Product: Integrated Camera 2M [ 2.943658] usb 1-6: Manufacturer: globaloptics [ 2.943662] usb 1-6: SerialNumber: ... [ 3.055944] random: fast init done [ 4.421042] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 6.132170] systemd[1]: systemd 242.153-2-manjaro running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 6.147652] systemd[1]: Detected architecture x86-64. [ 6.200976] systemd[1]: Set hostname to ... [ 6.474578] random: crng init done [ 9.084238] systemd[1]: Listening on Journal Audit Socket. [ 9.084825] systemd[1]: Listening on udev Control Socket. [ 9.085035] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.085245] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 9.085958] systemd[1]: Set up automount ... [ 9.093817] systemd[1]: Listening on Process Core Dump Socket. [ 9.095211] systemd[1]: Created slice system-getty.slice. [ 9.238280] EXT4-fs (sda3): re-mounted. Opts: (null) [ 11.005648] systemd-journald[278]: Received request to flush runtime journal from PID 1 [ 11.085403] systemd-journald[278]: File /var/log/journal/7b9a01e60efc499482aeb5bd61869471/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 11.849692] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 11.855147] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 11.860199] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 11.868692] idma64 idma64.3: Found Intel integrated DMA 64-bit [ 11.873694] idma64 idma64.4: Found Intel integrated DMA 64-bit [ 11.878732] idma64 idma64.5: Found Intel integrated DMA 64-bit [ 11.882608] input: Intel Virtual Button driver as /devices/platform/INT33D6:00/input/input4 [ 11.894741] idma64 idma64.6: Found Intel integrated DMA 64-bit [ 11.903531] idma64 idma64.7: Found Intel integrated DMA 64-bit [ 11.921346] idma64 idma64.8: Found Intel integrated DMA 64-bit [ 11.921951] idma64 idma64.9: Found Intel integrated DMA 64-bit [ 11.923293] idma64 idma64.11: Found Intel integrated DMA 64-bit [ 11.924568] ACPI Warning: \_SB.IETM._ART: Return Package has no elements (empty) (20190816/nsprepkg-94) [ 11.925707] idma64 idma64.12: Found Intel integrated DMA 64-bit [ 11.926326] idma64 idma64.13: Found Intel integrated DMA 64-bit [ 11.969863] proc_thermal 0000:00:00.1: Creating sysfs group for PROC_THERMAL_PCI [ 12.025137] hidraw: raw HID events driver (C) Jiri Kosina [ 12.085969] i2c_hid i2c-SIS0817:00: i2c-SIS0817:00 supply vdd not found, using dummy regulator [ 12.086000] i2c_hid i2c-SIS0817:00: i2c-SIS0817:00 supply vddl not found, using dummy regulator [ 12.124328] i2c_hid i2c-ELAN2001:00: i2c-ELAN2001:00 supply vdd not found, using dummy regulator [ 12.124369] i2c_hid i2c-ELAN2001:00: i2c-ELAN2001:00 supply vddl not found, using dummy regulator [ 12.149526] Linux agpgart interface v0.103 [ 12.184103] battery: ACPI: Battery Slot [BAT1] (battery present) [ 12.284496] ACPI: AC Adapter [ADP1] (on-line) [ 12.322792] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 12.382691] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 12.382696] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 12.382697] RAPL PMU: hw unit of domain package 2^-14 Joules [ 12.382698] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 12.382699] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 12.457923] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A [ 12.457927] i801_smbus 0000:00:1f.1: PCI INT A: not connected [ 12.457952] i801_smbus 0000:00:1f.1: SPD Write Disable is set [ 12.457977] i801_smbus 0000:00:1f.1: SMBus using polling [ 12.617395] libphy: r8169: probed [ 12.617629] r8169 0000:03:00.0 eth0: RTL8168h/8111h, XX:XX:XX:XX:XX:XX, XID 541, IRQ 130 [ 12.617633] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 12.647584] intel_rapl_common: Found RAPL domain package [ 12.647589] intel_rapl_common: Found RAPL domain core [ 12.647592] intel_rapl_common: Found RAPL domain uncore [ 12.647594] intel_rapl_common: Found RAPL domain dram [ 12.679676] cryptd: max_cpu_qlen set to 1000 [ 12.787432] checking generic (80000000 300000) vs hw (80000000 10000000) [ 12.787436] fb0: switching to inteldrmfb from EFI VGA [ 12.787544] i915 0000:00:02.0: vgaarb: deactivate vga console [ 12.787675] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.787676] [drm] Driver supports precise vblank timestamp query. [ 12.787807] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 12.816673] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 [ 12.818524] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 12.819036] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 12.819281] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 12.823635] fbcon: i915drmfb (fb0) is primary device [ 12.823637] fbcon: Deferring console take-over [ 12.823642] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 12.847595] dw-apb-uart.8: ttyS0 at MMIO 0x91330000 (irq = 4, base_baud = 115200) is a 16550A [ 12.866440] dw-apb-uart.9: ttyS1 at MMIO 0x9132e000 (irq = 5, base_baud = 115200) is a 16550A [ 12.879464] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.880884] dw-apb-uart.10: ttyS2 at MMIO 0x9132c000 (irq = 7, base_baud = 115200) is a 16550A [ 12.904733] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.015909] input: SIS0817:00 0457:129E Touchscreen as /devices/pci0000:00/0000:00:16.1/i2c_designware.1/i2c-1/i2c-SIS0817:00/0018:0457:129E.0001/input/input7 [ 13.019802] hid-generic 0018:0457:129E.0001: input,hidraw0: I2C HID v1.00 Device [SIS0817:00 0457:129E] on i2c-SIS0817:00 [ 13.020116] input: ELAN2001:00 04F3:0400 as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-4/i2c-ELAN2001:00/0018:04F3:0400.0002/input/input9 [ 13.020211] hid-generic 0018:04F3:0400.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN2001:00 04F3:0400] on i2c-ELAN2001:00 [ 13.058766] SSE version of gcm_enc/dec engaged. [ 13.060957] input: SIS0817:00 0457:129E as /devices/pci0000:00/0000:00:16.1/i2c_designware.1/i2c-1/i2c-SIS0817:00/0018:0457:129E.0001/input/input10 [ 13.061077] hid-multitouch 0018:0457:129E.0001: input,hidraw0: I2C HID v1.00 Device [SIS0817:00 0457:129E] on i2c-SIS0817:00 [ 13.101156] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7) [ 13.217356] intel-spi intel-spi: mx25u6435f (8192 Kbytes) [ 13.269059] Intel(R) Wireless WiFi driver for Linux [ 13.269062] Copyright(c) 2003- 2015 Intel Corporation [ 13.269368] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 13.269818] bmc150_accel_i2c i2c-BSG2150:00-bmc150_accel.0: mounting matrix not found: using identity... [ 13.293386] iwlwifi 0000:02:00.0: Found debug destination: EXTERNAL_DRAM [ 13.293390] iwlwifi 0000:02:00.0: Found debug configuration: 0 [ 13.294035] iwlwifi 0000:02:00.0: loaded firmware version 29.1654887522.0 op_mode iwlmvm [ 13.300798] bmc150_magn_i2c i2c-BSG2150:00-bmc150_magn.1: mounting matrix not found: using identity... [ 13.320442] Creating 1 MTD partitions on "intel-spi": [ 13.320449] 0x000000000000-0x0000007ff000 : "BIOS" [ 13.369798] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 13.369802] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.369805] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 13.369806] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 13.369807] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 13.369810] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 13.369812] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 13.369952] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 13.514630] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12 [ 13.514715] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13 [ 13.514788] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14 [ 13.514861] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15 [ 13.514935] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16 [ 13.515013] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input17 [ 13.515088] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input18 [ 13.515155] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input19 [ 13.609563] mousedev: PS/2 mouse device common for all mice [ 13.889248] Bluetooth: Core ver 2.22 [ 13.889805] NET: Registered protocol family 31 [ 13.889807] Bluetooth: HCI device and connection manager initialized [ 13.889814] Bluetooth: HCI socket layer initialized [ 13.889817] Bluetooth: L2CAP socket layer initialized [ 13.889823] Bluetooth: SCO socket layer initialized [ 14.104502] usbcore: registered new interface driver btusb [ 14.130880] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 14.144454] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210 [ 14.158818] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 14.161604] iwlwifi 0000:02:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 14.171016] iwlwifi 0000:02:00.0: base HW address: XX:XX:XX:XX:XX:XX [ 14.234172] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 14.234818] thermal thermal_zone4: failed to read out thermal zone (-61) [ 14.248633] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.e.bseq [ 14.260473] mc: Linux media interface: v0.10 [ 14.328768] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 14.540926] Bluetooth: hci0: unexpected event for opcode 0xfc2f [ 14.556970] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0 [ 14.557017] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0 [ 14.557062] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0 [ 14.557104] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0 [ 14.557148] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0 [ 14.557190] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0 [ 14.557857] Bluetooth: hci0: Intel firmware patch completed and activated [ 14.557947] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0 [ 14.558040] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0 [ 14.558082] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0 [ 14.558123] EDAC pnd2: d_cr_drp0=0c000c005 ret=0 [ 14.558164] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 14.558205] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 14.558246] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 14.558248] EDAC pnd2: ECC disabled on channel 0 [ 14.558249] EDAC pnd2: Failed to register device with error -22. [ 14.592126] videodev: Linux video capture interface: v2.00 [ 14.595328] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0 [ 14.595371] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0 [ 14.595413] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0 [ 14.595456] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0 [ 14.595497] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0 [ 14.595539] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0 [ 14.595580] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0 [ 14.595662] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0 [ 14.595703] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0 [ 14.595745] EDAC pnd2: d_cr_drp0=0c000c005 ret=0 [ 14.595786] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 14.596649] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 14.596692] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 14.596695] EDAC pnd2: ECC disabled on channel 0 [ 14.596697] EDAC pnd2: Failed to register device with error -22. [ 14.646195] mod_usbdpfp: loading out-of-tree module taints kernel. [ 14.651116] mod_usbdpfp: module verification failed: signature and/or required key missing - tainting kernel [ 14.655603] usbcore: registered new interface driver mod_usbdpfp [ 14.809436] intel_telemetry_core Init [ 15.017445] Invalid pltconfig, ensure IPC1 device is enabled in BIOS [ 15.048955] Invalid pltconfig, ensure IPC1 device is enabled in BIOS [ 15.185537] uvcvideo: Found UVC 1.00 device Integrated Camera 2M (2d27:18e7) [ 15.199868] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized! [ 15.199874] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized! [ 15.199877] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized! [ 15.200120] input: Integrated Camera 2M: Integrate as /devices/pci0000:00/0000:00:15.0/usb1/1-6/1-6:1.0/input/input20 [ 15.200537] usbcore: registered new interface driver uvcvideo [ 15.200539] USB Video Class driver (1.1.1) [ 19.713637] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.713640] Bluetooth: BNEP filters: protocol multicast [ 19.713647] Bluetooth: BNEP socket layer initialized [ 19.771328] NET: Registered protocol family 38 [ 20.051087] loop: module loaded [ 20.106662] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 22.190134] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 22.295392] r8169 0000:03:00.0 enp3s0: Link is Down [ 22.318993] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 22.399178] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 22.400627] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring [ 22.444334] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 22.525441] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 22.526734] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring [ 25.695877] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off [ 25.695912] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 28.475804] fuse: init (API version 7.31) [ 28.477747] *** VALIDATE fuse *** [ 28.477755] *** VALIDATE fuse *** [ 35.875337] systemd-journald[278]: File /var/log/journal/7b9a01e60efc499482aeb5bd61869471/user-XXXX.journal corrupted or uncleanly shut down, renaming and replacing. [ 42.527827] Bluetooth: RFCOMM TTY layer initialized [ 42.527838] Bluetooth: RFCOMM socket layer initialized [ 42.527854] Bluetooth: RFCOMM ver 1.11 [ 77.820100] usb 1-1: USB disconnect, device number 2 [ 439.414067] usb 1-5: new full-speed USB device number 5 using xhci_hcd [ 439.563609] usb 1-5: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [ 439.563619] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 439.563625] usb 1-5: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [ 439.563630] usb 1-5: Manufacturer: DigitalPersona, Inc. [ 439.563635] usb 1-5: SerialNumber: ... [ 739.514141] atkbd serio0: Unknown key pressed (translated set 2, code 0x97 on isa0060/serio0). [ 739.514150] atkbd serio0: Use 'setkeycodes e017 <keycode>' to make it known. [ 739.523696] atkbd serio0: Unknown key released (translated set 2, code 0x97 on isa0060/serio0). [ 739.523706] atkbd serio0: Use 'setkeycodes e017 <keycode>' to make it known. [ 741.569970] r8169 0000:03:00.0 enp3s0: Link is Down [ 742.226193] PM: suspend entry (deep) [ 742.695868] Filesystems sync: 0.469 seconds [ 742.698283] Freezing user space processes ... (elapsed 0.224 seconds) done. [ 742.923223] OOM killer disabled. [ 742.923226] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 742.924973] printk: Suspending console(s) (use no_console_suspend to debug) [ 742.970495] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 742.985776] sd 0:0:0:0: [sda] Stopping disk [ 743.829226] ACPI: EC: interrupt blocked [ 743.860516] acpi device:4d: Cannot transition from D3cold to D3hot [ 743.867199] acpi device:4b: Cannot transition from D3cold to D3hot [ 743.867593] ACPI: Preparing to enter system sleep state S3 [ 743.868440] ACPI: EC: event blocked [ 743.868442] ACPI: EC: EC stopped [ 743.868444] PM: Saving platform NVS memory [ 743.868454] Disabling non-boot CPUs ... [ 743.870358] smpboot: CPU 1 is now offline [ 743.876206] ACPI: Low-level resume complete [ 743.876482] ACPI: EC: EC started [ 743.876488] PM: Restoring platform NVS memory [ 743.877625] Enabling non-boot CPUs ... [ 743.877830] x86: Booting SMP configuration: [ 743.877837] smpboot: Booting Node 0 Processor 1 APIC 0x4 [ 743.881807] CPU1 is up [ 743.882126] ACPI: Waking up from system sleep state S3 [ 744.058797] acpi LNXPOWER:03: Turning ON [ 744.059996] ACPI: EC: interrupt unblocked [ 744.084613] ACPI: EC: event unblocked [ 744.091246] sd 0:0:0:0: [sda] Starting disk [ 744.098642] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 744.182951] iwlwifi 0000:02:00.0: Applying debug destination EXTERNAL_DRAM [ 744.184059] iwlwifi 0000:02:00.0: FW already configured (0) - re-configuring [ 744.323634] usb 1-6: reset high-speed USB device number 4 using xhci_hcd [ 744.352716] bmc150_accel_i2c i2c-BSG2150:00-bmc150_accel.0: Error writing reg_pmu_lpw [ 744.870143] ACPI: button: The lid device is not compliant to SW_LID. [ 745.523471] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 745.526748] ata1.00: configured for UDMA/100 [ 746.868554] OOM killer enabled. [ 746.868556] Restarting tasks ... [ 746.868626] usb 1-5: USB disconnect, device number 5 [ 746.884699] done. [ 747.113551] PM: suspend exit [ 747.177300] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 747.281234] r8169 0000:03:00.0 enp3s0: Link is Down [ 751.480725] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off [ 751.480744] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready [ 2649.513145] usb 1-5: new full-speed USB device number 6 using xhci_hcd [ 2649.662478] usb 1-5: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [ 2649.662482] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2649.662485] usb 1-5: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [ 2649.662488] usb 1-5: Manufacturer: DigitalPersona, Inc. [ 2649.662490] usb 1-5: SerialNumber: ... [ 5655.590838] usb 1-5: USB disconnect, device number 6 [ 5771.175945] usb 1-5: new full-speed USB device number 7 using xhci_hcd [ 5771.325273] usb 1-5: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [ 5771.325277] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5771.325279] usb 1-5: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [ 5771.325281] usb 1-5: Manufacturer: DigitalPersona, Inc. [ 5771.325282] usb 1-5: SerialNumber: ... [ 5778.682531] usb 1-5: USB disconnect, device number 7 [ 5784.165950] usb 1-5: new full-speed USB device number 8 using xhci_hcd [ 5784.315272] usb 1-5: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [ 5784.315275] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5784.315277] usb 1-5: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [ 5784.315279] usb 1-5: Manufacturer: DigitalPersona, Inc. [ 5784.315280] usb 1-5: SerialNumber: ... [ 5952.405748] /opt/DigitalPersona/urusdk-linux/Linux/drivers/source/usbdpfp/usbdpfp.c: **ERROR** usbdpfp_ioctl: 1725: device minor 0: Invalid ioctol code 0x80685600 [ 8083.424674] usbcore: deregistering interface driver mod_usbdpfp [ 8885.003231] usbcore: registered new interface driver mod_usbdpfp [ 8949.263349] usb 1-5: USB disconnect, device number 8 [ 8952.392081] usb 1-5: new full-speed USB device number 9 using xhci_hcd [ 8952.541406] usb 1-5: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [ 8952.541411] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8952.541414] usb 1-5: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [ 8952.541417] usb 1-5: Manufacturer: DigitalPersona, Inc. [ 8952.541420] usb 1-5: SerialNumber: ... [ 9187.317637] /opt/DigitalPersona/urusdk-linux/Linux/drivers/source/usbdpfp/usbdpfp.c: **ERROR** usbdpfp_ioctl: 1725: device minor 0: Invalid ioctol code 0x80685600 [ 9729.084078] usbcore: deregistering interface driver mod_usbdpfp [10019.925091] usbcore: registered new interface driver mod_usbdpfp [16773.527770] usb 1-5: USB disconnect, device number 9 [16775.637426] usb 1-5: new full-speed USB device number 10 using xhci_hcd [16775.786751] usb 1-5: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [16775.786755] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [16775.786758] usb 1-5: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [16775.786761] usb 1-5: Manufacturer: DigitalPersona, Inc. [16775.786764] usb 1-5: SerialNumber: ... [17396.857071] Non-volatile memory driver v1.3 [17397.231399] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [17397.262685] sd 0:0:0:0: Attached scsi generic sg0 type 0 [18021.423557] usb 1-5: USB disconnect, device number 10 [18024.643879] usb 1-5: new full-speed USB device number 11 using xhci_hcd [18024.793195] usb 1-5: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [18024.793198] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [18024.793200] usb 1-5: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [18024.793202] usb 1-5: Manufacturer: DigitalPersona, Inc. [18024.793204] usb 1-5: SerialNumber: ... [18039.418118] usb 1-5: USB disconnect, device number 11 [18045.830555] usb 1-5: new full-speed USB device number 12 using xhci_hcd [18045.979913] usb 1-5: New USB device found, idVendor=05ba, idProduct=000a, bcdDevice= 1.03 [18045.979920] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [18045.979925] usb 1-5: Product: U.are.U\xc2\xae 4500 Fingerprint Reader [18045.979930] usb 1-5: Manufacturer: DigitalPersona, Inc. [18045.979934] usb 1-5: SerialNumber: ... [18335.321368] /opt/DigitalPersona/urusdk-linux/Linux/drivers/source/usbdpfp/usbdpfp.c: **ERROR** usbdpfp_ioctl: 1725: device minor 0: Invalid ioctol code 0x80685600


Hardware for Linux and BSD

GitHub