[ 0.000000] Linux version 5.0.2-gentoo (XXX@XXX) (gcc version 8.3.0 (Gentoo 8.3.0 p1.0)) #1 SMP Thu Mar 14 14:12:01 CET 2019 [ 0.000000] Command line: BOOT_IMAGE=/kernel-genkernel-x86_64-5.0.2-gentoo root=/dev/mapper/XXXXXXX ro lvmraid=/dev/md/g8:0 domdadm dolvm rootfstype=ext4 quiet splash=verbose,theme:natural_gentoo video=uvesafb:mtrr:3,ywrap,1024x768-24@60 console=tty1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000099800-0x0000000000099bff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000f1de3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f1de4000-0x00000000f1dedfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f1dee000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040bffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP ProLiant MicroServer Gen8, BIOS J06 05/21/2018 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3292.628 MHz processor [ 0.000922] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000923] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000926] last_pfn = 0x40bfff max_arch_pfn = 0x400000000 [ 0.000929] MTRR default type: write-back [ 0.000929] MTRR fixed ranges enabled: [ 0.000930] 00000-9FFFF write-back [ 0.000931] A0000-BFFFF uncachable [ 0.000931] C0000-FFFFF write-protect [ 0.000932] MTRR variable ranges enabled: [ 0.000932] 0 base 0F4000000 mask FFC000000 uncachable [ 0.000933] 1 base 0F8000000 mask FF8000000 uncachable [ 0.000933] 2 disabled [ 0.000934] 3 disabled [ 0.000934] 4 disabled [ 0.000934] 5 disabled [ 0.000935] 6 disabled [ 0.000935] 7 disabled [ 0.000935] 8 disabled [ 0.000935] 9 disabled [ 0.001742] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001807] last_pfn = 0xf1de4 max_arch_pfn = 0x400000000 [ 0.004666] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [(____ptrval____)] [ 0.004675] check: Scanning 1 areas for low memory corruption [ 0.004676] Base memory trampoline at [(____ptrval____)] 93000 size 24576 [ 0.004681] BRK [0x02c01000, 0x02c01fff] PGTABLE [ 0.004683] BRK [0x02c02000, 0x02c02fff] PGTABLE [ 0.004684] BRK [0x02c03000, 0x02c03fff] PGTABLE [ 0.004721] BRK [0x02c04000, 0x02c04fff] PGTABLE [ 0.004801] BRK [0x02c05000, 0x02c05fff] PGTABLE [ 0.004933] BRK [0x02c06000, 0x02c06fff] PGTABLE [ 0.005076] RAMDISK: [mem 0x36f1d000-0x37785fff] [ 0.005081] ACPI: Early table checksum verification disabled [ 0.005115] ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP ) [ 0.005117] ACPI: XSDT 0x00000000F1DE6400 0000AC (v01 HP ProLiant 00000002 \xd2? 0000162E) [ 0.005121] ACPI: FACP 0x00000000F1DE6540 0000F4 (v03 HP ProLiant 00000002 \xd2? 0000162E) [ 0.005124] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20181213/tbfadt-569) [ 0.005126] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20181213/tbfadt-569) [ 0.005127] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20181213/tbfadt-674) [ 0.005128] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20181213/tbfadt-674) [ 0.005130] ACPI: DSDT 0x00000000F1DE6640 001C1A (v01 HP DSDT 00000001 INTL 20030228) [ 0.005132] ACPI: FACS 0x00000000F1DE4140 000040 [ 0.005134] ACPI: FACS 0x00000000F1DE4140 000040 [ 0.005135] ACPI: SPCR 0x00000000F1DE4180 000050 (v01 HP SPCRRBSU 00000001 \xd2? 0000162E) [ 0.005137] ACPI: MCFG 0x00000000F1DE4200 00003C (v01 HP ProLiant 00000001 00000000) [ 0.005139] ACPI: HPET 0x00000000F1DE4240 000038 (v01 HP ProLiant 00000002 \xd2? 0000162E) [ 0.005140] ACPI: FFFF 0x00000000F1DE4280 000064 (v02 HP ProLiant 00000002 \xd2? 0000162E) [ 0.005142] ACPI: SPMI 0x00000000F1DE4300 000040 (v05 HP ProLiant 00000001 \xd2? 0000162E) [ 0.005144] ACPI: ERST 0x00000000F1DE4340 000230 (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.005146] ACPI: APIC 0x00000000F1DE4580 000252 (v01 HP ProLiant 00000002 00000000) [ 0.005148] ACPI: FFFF 0x00000000F1DE4800 000176 (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.005149] ACPI: BERT 0x00000000F1DE4980 000030 (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.005151] ACPI: HEST 0x00000000F1DE49C0 0000BC (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.005153] ACPI: DMAR 0x00000000F1DE4A80 0003F0 (v01 HP ProLiant 00000001 \xd2? 0000162E) [ 0.005155] ACPI: FFFF 0x00000000F1DE63C0 00002D (v01 HP ProLiant 00000001 00000000) [ 0.005157] ACPI: SSDT 0x00000000F1DE8280 000137 (v03 HP CRSPCI0 00000002 HP 00000001) [ 0.005159] ACPI: SSDT 0x00000000F1DE83C0 000177 (v03 HP riser0 00000002 INTL 20030228) [ 0.005161] ACPI: SSDT 0x00000000F1DE8540 000377 (v01 HP pmab 00000001 INTL 20090625) [ 0.005163] ACPI: SSDT 0x00000000F1DE88C0 002864 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.005168] ACPI: Local APIC address 0xfee00000 [ 0.005198] No NUMA configuration found [ 0.005198] Faking a node at [mem 0x0000000000000000-0x000000040bffefff] [ 0.005206] NODE_DATA(0) allocated [mem 0x40bfdd000-0x40bffefff] [ 0.005523] Zone ranges: [ 0.005524] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005525] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.005525] Normal [mem 0x0000000100000000-0x000000040bffefff] [ 0.005526] Movable zone start for each node [ 0.005528] Early memory node ranges [ 0.005529] node 0: [mem 0x0000000000001000-0x0000000000098fff] [ 0.005530] node 0: [mem 0x0000000000100000-0x00000000f1de3fff] [ 0.005530] node 0: [mem 0x0000000100000000-0x000000040bffefff] [ 0.005868] Zeroed struct page in unavailable ranges: 25220 pages [ 0.005869] Initmem setup node 0 [mem 0x0000000000001000-0x000000040bffefff] [ 0.005870] On node 0 totalpages: 4185467 [ 0.005870] DMA zone: 64 pages used for memmap [ 0.005871] DMA zone: 21 pages reserved [ 0.005871] DMA zone: 3992 pages, LIFO batch:0 [ 0.005950] DMA32 zone: 16320 pages used for memmap [ 0.005950] DMA32 zone: 986596 pages, LIFO batch:63 [ 0.025183] Normal zone: 49920 pages used for memmap [ 0.025184] Normal zone: 3194879 pages, LIFO batch:63 [ 0.085430] ACPI: PM-Timer IO Port: 0x908 [ 0.085432] ACPI: Local APIC address 0xfee00000 [ 0.085437] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.085447] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.085448] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.085449] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.085450] ACPI: IRQ0 used by override. [ 0.085451] ACPI: IRQ9 used by override. [ 0.085453] Using ACPI (MADT) for SMP configuration information [ 0.085454] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.085457] ACPI: SPCR: SPCR table version 1 [ 0.085458] ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size [ 0.085459] ACPI: SPCR: console: uart,mmio,0x0,9600 [ 0.085461] smpboot: Allowing 64 CPUs, 56 hotplug CPUs [ 0.085471] [mem 0xf8000000-0xfebfffff] available for PCI devices [ 0.085473] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.154988] random: get_random_bytes called from start_kernel+0x88/0x46b with crng_init=0 [ 0.154993] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1 [ 0.156481] percpu: Embedded 43 pages/cpu @(____ptrval____) s136344 r8192 d31592 u262144 [ 0.156489] pcpu-alloc: s136344 r8192 d31592 u262144 alloc=1*2097152 [ 0.156489] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.156492] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.156495] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47 [ 0.156498] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63 [ 0.156523] Built 1 zonelists, mobility grouping on. Total pages: 4119142 [ 0.156524] Policy zone: Normal [ 0.156525] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-5.0.2-gentoo root=/dev/mapper/XXXXXXX ro lvmraid=/dev/md/g8:0 domdadm dolvm rootfstype=ext4 quiet splash=verbose,theme:natural_gentoo video=uvesafb:mtrr:3,ywrap,1024x768-24@60 console=tty1 [ 0.156718] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.156718] printk: log_buf_len total cpu_extra contributions: 258048 bytes [ 0.156718] printk: log_buf_len min size: 131072 bytes [ 0.156762] printk: log_buf_len: 524288 bytes [ 0.156762] printk: early log buf free: 121248(92%) [ 0.215118] Memory: 16362508K/16741868K available (12306K kernel code, 1982K rwdata, 3444K rodata, 1820K init, 3728K bss, 379360K reserved, 0K cma-reserved) [ 0.215273] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1 [ 0.215277] Kernel/User page tables isolation: enabled [ 0.215523] rcu: Hierarchical RCU implementation. [ 0.215524] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=64. [ 0.215524] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.215525] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64 [ 0.215655] NR_IRQS: 524544, nr_irqs: 936, preallocated irqs: 16 [ 0.215902] Console: colour dummy device 80x25 [ 0.215908] printk: console [tty1] enabled [ 0.215928] ACPI: Core revision 20181213 [ 0.216062] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.216069] hpet clockevent registered [ 0.216074] APIC: Switch to symmetric I/O mode setup [ 0.216075] DMAR: Host address width 39 [ 0.216076] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.216080] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da [ 0.216081] DMAR: RMRR base: 0x000000f1ffd000 end: 0x000000f1ffffff [ 0.216082] DMAR: RMRR base: 0x000000f1ff6000 end: 0x000000f1ffcfff [ 0.216082] DMAR: RMRR base: 0x000000f1f93000 end: 0x000000f1f94fff [ 0.216083] DMAR: RMRR base: 0x000000f1f8f000 end: 0x000000f1f92fff [ 0.216083] DMAR: RMRR base: 0x000000f1f7f000 end: 0x000000f1f8efff [ 0.216084] DMAR: RMRR base: 0x000000f1f7e000 end: 0x000000f1f7efff [ 0.216085] DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff [ 0.216085] DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff [ 0.216086] DMAR: RMRR base: 0x000000f1dee000 end: 0x000000f1deefff [ 0.216088] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.216088] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.216350] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.216352] Switched APIC routing to physical flat. [ 0.216728] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.266073] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f7618341c5, max_idle_ns: 440795321219 ns [ 0.266075] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.25 BogoMIPS (lpj=32926280) [ 0.266076] pid_max: default: 65536 minimum: 512 [ 0.266117] LSM: Security Framework initializing [ 0.268360] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.269493] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.269539] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.269577] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.269760] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.269761] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.269764] mce: CPU supports 9 MCE banks [ 0.269773] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.269781] process: using mwait in idle threads [ 0.269783] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.269784] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.269786] Spectre V2 : Mitigation: Full generic retpoline [ 0.269786] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.269787] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.269788] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.269788] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.269790] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.269934] Freeing SMP alternatives memory: 28K [ 0.270152] TSC deadline timer enabled [ 0.270156] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.270235] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Broken BIOS detected, complain to your hardware vendor. [ 0.270250] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) [ 0.270253] Intel PMU driver. [ 0.270255] ... version: 3 [ 0.270255] ... bit width: 48 [ 0.270256] ... generic registers: 4 [ 0.270256] ... value mask: 0000ffffffffffff [ 0.270257] ... max period: 00007fffffffffff [ 0.270257] ... fixed-purpose events: 3 [ 0.270258] ... event mask: 000000070000000f [ 0.270299] rcu: Hierarchical SRCU implementation. [ 0.270631] smp: Bringing up secondary CPUs ... [ 0.270685] x86: Booting SMP configuration: [ 0.270686] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.289619] smp: Brought up 1 node, 8 CPUs [ 0.289619] smpboot: Max logical packages: 8 [ 0.289619] smpboot: Total of 8 processors activated (52682.04 BogoMIPS) [ 0.296268] devtmpfs: initialized [ 0.296293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.296293] futex hash table entries: 16384 (order: 8, 1048576 bytes) [ 0.296403] xor: automatically using best checksumming function avx [ 0.296525] NET: Registered protocol family 16 [ 0.296745] cpuidle: using governor ladder [ 0.296745] cpuidle: using governor menu [ 0.296745] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.296745] ACPI: bus type PCI registered [ 0.296745] dca service started, version 1.12.1 [ 0.296745] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.296745] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.296745] PCI: Using configuration type 1 for base access [ 0.296745] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.298980] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.298980] cryptd: max_cpu_qlen set to 1000 [ 0.464789] raid6: sse2x4 gen() 14824 MB/s [ 0.634793] raid6: sse2x4 xor() 10017 MB/s [ 0.804796] raid6: sse2x2 gen() 12448 MB/s [ 0.974803] raid6: sse2x2 xor() 8219 MB/s [ 1.144809] raid6: sse2x1 gen() 10361 MB/s [ 1.314811] raid6: sse2x1 xor() 7241 MB/s [ 1.314811] raid6: using algorithm sse2x4 gen() 14824 MB/s [ 1.314812] raid6: .... xor() 10017 MB/s, rmw enabled [ 1.314813] raid6: using ssse3x2 recovery algorithm [ 1.316079] ACPI: Added _OSI(Module Device) [ 1.316079] ACPI: Added _OSI(Processor Device) [ 1.316079] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.316079] ACPI: Added _OSI(Processor Aggregator Device) [ 1.316079] ACPI: Added _OSI(Linux-Dell-Video) [ 1.316079] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.316079] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 1.316079] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 1.316755] ACPI: Interpreter enabled [ 1.316759] ACPI: (supports S0 S5) [ 1.316759] ACPI: Using IOAPIC for interrupt routing [ 1.316770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.318052] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-14]) [ 1.318055] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.318105] acpi PNP0A08:00: _OSC: platform does not support [PME AER PCIeCapability LTR] [ 1.318106] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 1.318108] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR] [ 1.318109] acpi PNP0A08:00: _OSC: platform willing to grant [] [ 1.318110] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 1.318123] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored [ 1.318135] PCI host bridge to bus 0000:00 [ 1.318136] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff window] [ 1.318138] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 1.318139] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.318139] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.318140] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window] [ 1.318142] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff window] [ 1.318142] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] [ 1.318143] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window] [ 1.318144] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.318146] pci_bus 0000:00: root bus resource [bus 00-14] [ 1.318152] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 1.318204] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 1.318230] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.318278] pci 0000:00:06.0: [8086:015d] type 01 class 0x060400 [ 1.318351] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 1.318422] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 1.318442] pci 0000:00:1a.0: reg 0x10: [mem 0xfacf0000-0xfacf03ff] [ 1.318516] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.318558] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 1.318632] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.318649] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.318651] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.318693] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 1.318765] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.318779] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 1.318781] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 1.318820] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 1.318890] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 1.318906] pci 0000:00:1c.6: Enabling MPC IRBNCE [ 1.318907] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled [ 1.318946] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 1.319017] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.319031] pci 0000:00:1c.7: Enabling MPC IRBNCE [ 1.319033] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled [ 1.319071] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 1.319090] pci 0000:00:1d.0: reg 0x10: [mem 0xface0000-0xface03ff] [ 1.319164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.319204] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 1.319278] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 1.319412] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 1.319427] pci 0000:00:1f.2: reg 0x10: [io 0x10c0-0x10c7] [ 1.319433] pci 0000:00:1f.2: reg 0x14: [io 0x10c8-0x10cb] [ 1.319439] pci 0000:00:1f.2: reg 0x18: [io 0x10d0-0x10d7] [ 1.319445] pci 0000:00:1f.2: reg 0x1c: [io 0x10d8-0x10db] [ 1.319451] pci 0000:00:1f.2: reg 0x20: [io 0x10e0-0x10ff] [ 1.319457] pci 0000:00:1f.2: reg 0x24: [mem 0xfacd0000-0xfacd07ff] [ 1.319491] pci 0000:00:1f.2: PME# supported from D3hot [ 1.319544] pci 0000:07:00.0: [10df:fe00] type 00 class 0x0c0400 [ 1.319558] pci 0000:07:00.0: reg 0x10: [mem 0xfbff0000-0xfbff0fff 64bit] [ 1.319566] pci 0000:07:00.0: reg 0x18: [mem 0xfbfe0000-0xfbfe00ff 64bit] [ 1.319571] pci 0000:07:00.0: reg 0x20: [io 0x5000-0x50ff] [ 1.319581] pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.319585] pci 0000:07:00.0: enabling Extended Tags [ 1.319695] pci 0000:07:00.1: [10df:fe00] type 00 class 0x0c0400 [ 1.319709] pci 0000:07:00.1: reg 0x10: [mem 0xfbfd0000-0xfbfd0fff 64bit] [ 1.319717] pci 0000:07:00.1: reg 0x18: [mem 0xfbfc0000-0xfbfc00ff 64bit] [ 1.319722] pci 0000:07:00.1: reg 0x20: [io 0x5400-0x54ff] [ 1.319732] pci 0000:07:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.319736] pci 0000:07:00.1: enabling Extended Tags [ 1.346094] pci 0000:00:01.0: PCI bridge to [bus 07] [ 1.346098] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 1.346101] pci 0000:00:01.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 1.346144] pci 0000:00:06.0: PCI bridge to [bus 02] [ 1.346191] pci 0000:00:1c.0: PCI bridge to [bus 0d] [ 1.346244] pci 0000:03:00.0: [14e4:165f] type 00 class 0x020000 [ 1.346281] pci 0000:03:00.0: reg 0x10: [mem 0xfabf0000-0xfabfffff 64bit pref] [ 1.346299] pci 0000:03:00.0: reg 0x18: [mem 0xfabe0000-0xfabeffff 64bit pref] [ 1.346316] pci 0000:03:00.0: reg 0x20: [mem 0xfabd0000-0xfabdffff 64bit pref] [ 1.346328] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.346427] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 1.346473] pci 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:1c.4 (capable of 8.000 Gb/s with 5 GT/s x2 link) [ 1.346507] pci 0000:03:00.1: [14e4:165f] type 00 class 0x020000 [ 1.346544] pci 0000:03:00.1: reg 0x10: [mem 0xfabc0000-0xfabcffff 64bit pref] [ 1.346561] pci 0000:03:00.1: reg 0x18: [mem 0xfabb0000-0xfabbffff 64bit pref] [ 1.346578] pci 0000:03:00.1: reg 0x20: [mem 0xfaba0000-0xfabaffff 64bit pref] [ 1.346590] pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.346688] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 1.376107] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.376118] pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref] [ 1.376189] pci 0000:04:00.0: [1912:0014] type 00 class 0x0c0330 [ 1.376237] pci 0000:04:00.0: reg 0x10: [mem 0xfbef0000-0xfbef1fff 64bit] [ 1.376419] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.406105] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 1.406111] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.406180] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000 [ 1.406209] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 1.406222] pci 0000:01:00.0: reg 0x14: [mem 0xfbdf0000-0xfbdf01ff] [ 1.406234] pci 0000:01:00.0: reg 0x18: [io 0x3400-0x34ff] [ 1.406413] pci 0000:01:00.1: [102b:0533] type 00 class 0x030000 [ 1.406442] pci 0000:01:00.1: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 1.406454] pci 0000:01:00.1: reg 0x14: [mem 0xfbde0000-0xfbde3fff] [ 1.406467] pci 0000:01:00.1: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 1.406638] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000 [ 1.406667] pci 0000:01:00.2: reg 0x10: [io 0x3800-0x38ff] [ 1.406679] pci 0000:01:00.2: reg 0x14: [mem 0xfaff0000-0xfaff00ff] [ 1.406692] pci 0000:01:00.2: reg 0x18: [mem 0xfae00000-0xfaefffff] [ 1.406704] pci 0000:01:00.2: reg 0x1c: [mem 0xfad80000-0xfadfffff] [ 1.406717] pci 0000:01:00.2: reg 0x20: [mem 0xfad70000-0xfad77fff] [ 1.406729] pci 0000:01:00.2: reg 0x24: [mem 0xfad60000-0xfad67fff] [ 1.406742] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.406808] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 1.406868] pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300 [ 1.406943] pci 0000:01:00.4: reg 0x20: [io 0x4000-0x401f] [ 1.436103] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 1.436107] pci 0000:00:1c.7: bridge window [io 0x3000-0x4fff] [ 1.436111] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff] [ 1.436118] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.436139] pci_bus 0000:14: extended config space not accessible [ 1.436194] pci 0000:00:1e.0: PCI bridge to [bus 14] (subtractive decode) [ 1.436201] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfbffffff window] (subtractive decode) [ 1.436202] pci 0000:00:1e.0: bridge window [io 0x1000-0xffff window] (subtractive decode) [ 1.436203] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 1.436204] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 1.436205] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode) [ 1.436206] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff window] (subtractive decode) [ 1.436207] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode) [ 1.436208] pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode) [ 1.436209] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 1.436238] pci_bus 0000:00: on NUMA node 0 [ 1.436364] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) [ 1.436391] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 1.436416] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) [ 1.436442] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 1.436467] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) [ 1.436492] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4 [ 1.436517] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. [ 1.436542] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. [ 1.436629] pci 0000:01:00.1: vgaarb: setting as boot VGA device [ 1.436629] pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.436629] pci 0000:01:00.1: vgaarb: bridge control possible [ 1.436629] vgaarb: loaded [ 1.436629] SCSI subsystem initialized [ 1.436629] libata version 3.00 loaded. [ 1.436629] ACPI: bus type USB registered [ 1.436629] usbcore: registered new interface driver usbfs [ 1.436629] usbcore: registered new interface driver hub [ 1.436629] usbcore: registered new device driver usb [ 1.436629] pps_core: LinuxPPS API ver. 1 registered [ 1.436629] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 1.436629] PTP clock support registered [ 1.436629] EDAC MC: Ver: 3.0.0 [ 1.436629] PCI: Using ACPI for IRQ routing [ 1.437389] PCI: pci_cache_line_size set to 64 bytes [ 1.437440] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff] [ 1.437441] e820: reserve RAM buffer [mem 0xf1de4000-0xf3ffffff] [ 1.437442] e820: reserve RAM buffer [mem 0x40bfff000-0x40bffffff] [ 1.437519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.437519] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.439313] clocksource: Switched to clocksource tsc-early [ 1.557957] VFS: Disk quotas dquot_6.6.0 [ 1.557983] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.558013] FS-Cache: Loaded [ 1.558068] CacheFiles: Loaded [ 1.558076] pnp: PnP ACPI init [ 1.558200] system 00:00: [io 0x0408-0x040f] has been reserved [ 1.558202] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 1.558203] system 00:00: [io 0x0310-0x0313] has been reserved [ 1.558204] system 00:00: [io 0x0316-0x0317] has been reserved [ 1.558205] system 00:00: [io 0x0700-0x071f] has been reserved [ 1.558206] system 00:00: [io 0x0880-0x08ff] has been reserved [ 1.558207] system 00:00: [io 0x0900-0x097f] has been reserved [ 1.558208] system 00:00: [io 0x0cd4-0x0cd7] has been reserved [ 1.558209] system 00:00: [io 0x0cd0-0x0cd3] has been reserved [ 1.558210] system 00:00: [io 0x0f50-0x0f58] has been reserved [ 1.558211] system 00:00: [io 0x0ca0-0x0ca1] has been reserved [ 1.558212] system 00:00: [io 0x0ca4-0x0ca5] has been reserved [ 1.558213] system 00:00: [io 0x02f8-0x02ff] has been reserved [ 1.558215] system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved [ 1.558216] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 1.558217] system 00:00: [mem 0xfed90000-0xfed91fff] could not be reserved [ 1.558221] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.558265] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.558279] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.558290] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 1.558367] pnp: PnP ACPI: found 4 devices [ 1.563656] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.563698] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf80fffff] [ 1.563701] pci 0000:07:00.0: BAR 6: assigned [mem 0xfbf00000-0xfbf3ffff pref] [ 1.563702] pci 0000:07:00.1: BAR 6: assigned [mem 0xfbf40000-0xfbf7ffff pref] [ 1.563703] pci 0000:00:01.0: PCI bridge to [bus 07] [ 1.563705] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] [ 1.563707] pci 0000:00:01.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 1.563710] pci 0000:00:06.0: PCI bridge to [bus 02] [ 1.563718] pci 0000:00:1c.0: PCI bridge to [bus 0d] [ 1.563729] pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref] [ 1.563730] pci 0000:03:00.1: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref] [ 1.563731] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.563735] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff] [ 1.563738] pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref] [ 1.563742] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 1.563746] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.563753] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] [ 1.563754] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 1.563756] pci 0000:00:1c.7: bridge window [io 0x3000-0x4fff] [ 1.563760] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff] [ 1.563762] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.563767] pci 0000:00:1e.0: PCI bridge to [bus 14] [ 1.563776] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfbffffff window] [ 1.563777] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 1.563778] pci_bus 0000:00: resource 6 [io 0x0000-0x03af window] [ 1.563779] pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window] [ 1.563780] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window] [ 1.563781] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff window] [ 1.563782] pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb window] [ 1.563783] pci_bus 0000:00: resource 11 [io 0x03c0-0x03df window] [ 1.563784] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff window] [ 1.563785] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff] [ 1.563786] pci_bus 0000:07: resource 1 [mem 0xfbf00000-0xfbffffff] [ 1.563787] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf80fffff] [ 1.563788] pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref] [ 1.563789] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] [ 1.563790] pci_bus 0000:01: resource 0 [io 0x3000-0x4fff] [ 1.563791] pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbdfffff] [ 1.563792] pci_bus 0000:01: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.563793] pci_bus 0000:14: resource 4 [mem 0xf8000000-0xfbffffff window] [ 1.563794] pci_bus 0000:14: resource 5 [io 0x1000-0xffff window] [ 1.563795] pci_bus 0000:14: resource 6 [io 0x0000-0x03af window] [ 1.563796] pci_bus 0000:14: resource 7 [io 0x03e0-0x0cf7 window] [ 1.563797] pci_bus 0000:14: resource 8 [io 0x0d00-0x0fff window] [ 1.563798] pci_bus 0000:14: resource 9 [mem 0xfed00000-0xfed44fff window] [ 1.563799] pci_bus 0000:14: resource 10 [io 0x03b0-0x03bb window] [ 1.563800] pci_bus 0000:14: resource 11 [io 0x03c0-0x03df window] [ 1.563801] pci_bus 0000:14: resource 12 [mem 0x000a0000-0x000bffff window] [ 1.563844] NET: Registered protocol family 2 [ 1.564070] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) [ 1.564115] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.564268] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.564380] TCP: Hash tables configured (established 131072 bind 65536) [ 1.564439] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.564477] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.564587] NET: Registered protocol family 1 [ 1.564670] RPC: Registered named UNIX socket transport module. [ 1.564671] RPC: Registered udp transport module. [ 1.564671] RPC: Registered tcp transport module. [ 1.564672] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.586186] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x5fc took 20997 usecs [ 1.616180] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x5fc took 29279 usecs [ 1.616324] pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.616443] PCI: CLS 64 bytes, default 64 [ 1.616473] Trying to unpack rootfs image as initramfs... [ 1.832359] Freeing initrd memory: 8612K [ 1.832395] DMAR: No ATSR found [ 1.832535] DMAR: dmar0: Using Queued invalidation [ 1.832543] DMAR: Setting RMRR: [ 1.832723] DMAR: Setting identity map for device 0000:01:00.0 [0xf1dee000 - 0xf1deefff] [ 1.832913] DMAR: Setting identity map for device 0000:01:00.2 [0xf1dee000 - 0xf1deefff] [ 1.833100] DMAR: Setting identity map for device 0000:01:00.4 [0xf1dee000 - 0xf1deefff] [ 1.833300] DMAR: Setting identity map for device 0000:00:1f.2 [0xe8000 - 0xe8fff] [ 1.833496] DMAR: Setting identity map for device 0000:07:00.0 [0xe8000 - 0xe8fff] [ 1.833689] DMAR: Setting identity map for device 0000:07:00.1 [0xe8000 - 0xe8fff] [ 1.833883] DMAR: Setting identity map for device 0000:03:00.0 [0xe8000 - 0xe8fff] [ 1.834071] DMAR: Setting identity map for device 0000:03:00.1 [0xe8000 - 0xe8fff] [ 1.834259] DMAR: Setting identity map for device 0000:04:00.0 [0xe8000 - 0xe8fff] [ 1.834266] DMAR: Setting identity map for device 0000:01:00.0 [0xe8000 - 0xe8fff] [ 1.834273] DMAR: Setting identity map for device 0000:01:00.2 [0xe8000 - 0xe8fff] [ 1.834280] DMAR: Setting identity map for device 0000:00:1f.2 [0xf4000 - 0xf4fff] [ 1.834282] DMAR: Setting identity map for device 0000:07:00.0 [0xf4000 - 0xf4fff] [ 1.834283] DMAR: Setting identity map for device 0000:07:00.1 [0xf4000 - 0xf4fff] [ 1.834285] DMAR: Setting identity map for device 0000:03:00.0 [0xf4000 - 0xf4fff] [ 1.834286] DMAR: Setting identity map for device 0000:03:00.1 [0xf4000 - 0xf4fff] [ 1.834287] DMAR: Setting identity map for device 0000:04:00.0 [0xf4000 - 0xf4fff] [ 1.834288] DMAR: Setting identity map for device 0000:01:00.0 [0xf4000 - 0xf4fff] [ 1.834289] DMAR: Setting identity map for device 0000:01:00.2 [0xf4000 - 0xf4fff] [ 1.834291] DMAR: Setting identity map for device 0000:00:1f.2 [0xf1f7e000 - 0xf1f7efff] [ 1.834298] DMAR: Setting identity map for device 0000:07:00.0 [0xf1f7e000 - 0xf1f7efff] [ 1.834304] DMAR: Setting identity map for device 0000:07:00.1 [0xf1f7e000 - 0xf1f7efff] [ 1.834311] DMAR: Setting identity map for device 0000:03:00.0 [0xf1f7e000 - 0xf1f7efff] [ 1.834318] DMAR: Setting identity map for device 0000:03:00.1 [0xf1f7e000 - 0xf1f7efff] [ 1.834325] DMAR: Setting identity map for device 0000:04:00.0 [0xf1f7e000 - 0xf1f7efff] [ 1.834331] DMAR: Setting identity map for device 0000:01:00.0 [0xf1f7e000 - 0xf1f7efff] [ 1.834335] DMAR: Setting identity map for device 0000:01:00.2 [0xf1f7e000 - 0xf1f7efff] [ 1.834339] DMAR: Setting identity map for device 0000:00:1f.2 [0xf1f7f000 - 0xf1f8efff] [ 1.834341] DMAR: Setting identity map for device 0000:07:00.0 [0xf1f7f000 - 0xf1f8efff] [ 1.834342] DMAR: Setting identity map for device 0000:07:00.1 [0xf1f7f000 - 0xf1f8efff] [ 1.834344] DMAR: Setting identity map for device 0000:03:00.0 [0xf1f7f000 - 0xf1f8efff] [ 1.834345] DMAR: Setting identity map for device 0000:03:00.1 [0xf1f7f000 - 0xf1f8efff] [ 1.834347] DMAR: Setting identity map for device 0000:04:00.0 [0xf1f7f000 - 0xf1f8efff] [ 1.834348] DMAR: Setting identity map for device 0000:01:00.0 [0xf1f7f000 - 0xf1f8efff] [ 1.834349] DMAR: Setting identity map for device 0000:01:00.2 [0xf1f7f000 - 0xf1f8efff] [ 1.834351] DMAR: Setting identity map for device 0000:00:1f.2 [0xf1f8f000 - 0xf1f92fff] [ 1.834352] DMAR: Setting identity map for device 0000:07:00.0 [0xf1f8f000 - 0xf1f92fff] [ 1.834353] DMAR: Setting identity map for device 0000:07:00.1 [0xf1f8f000 - 0xf1f92fff] [ 1.834354] DMAR: Setting identity map for device 0000:03:00.0 [0xf1f8f000 - 0xf1f92fff] [ 1.834355] DMAR: Setting identity map for device 0000:03:00.1 [0xf1f8f000 - 0xf1f92fff] [ 1.834356] DMAR: Setting identity map for device 0000:04:00.0 [0xf1f8f000 - 0xf1f92fff] [ 1.834357] DMAR: Setting identity map for device 0000:01:00.0 [0xf1f8f000 - 0xf1f92fff] [ 1.834359] DMAR: Setting identity map for device 0000:01:00.2 [0xf1f8f000 - 0xf1f92fff] [ 1.834360] DMAR: Setting identity map for device 0000:00:1f.2 [0xf1f93000 - 0xf1f94fff] [ 1.834361] DMAR: Setting identity map for device 0000:07:00.0 [0xf1f93000 - 0xf1f94fff] [ 1.834362] DMAR: Setting identity map for device 0000:07:00.1 [0xf1f93000 - 0xf1f94fff] [ 1.834363] DMAR: Setting identity map for device 0000:03:00.0 [0xf1f93000 - 0xf1f94fff] [ 1.834364] DMAR: Setting identity map for device 0000:03:00.1 [0xf1f93000 - 0xf1f94fff] [ 1.834365] DMAR: Setting identity map for device 0000:04:00.0 [0xf1f93000 - 0xf1f94fff] [ 1.834366] DMAR: Setting identity map for device 0000:01:00.0 [0xf1f93000 - 0xf1f94fff] [ 1.834367] DMAR: Setting identity map for device 0000:01:00.2 [0xf1f93000 - 0xf1f94fff] [ 1.834368] DMAR: Setting identity map for device 0000:01:00.0 [0xf1ff6000 - 0xf1ffcfff] [ 1.834369] DMAR: Setting identity map for device 0000:01:00.2 [0xf1ff6000 - 0xf1ffcfff] [ 1.834371] DMAR: Setting identity map for device 0000:01:00.4 [0xf1ff6000 - 0xf1ffcfff] [ 1.834550] DMAR: Setting identity map for device 0000:00:1a.0 [0xf1ffd000 - 0xf1ffffff] [ 1.834731] DMAR: Setting identity map for device 0000:00:1d.0 [0xf1ffd000 - 0xf1ffffff] [ 1.834738] DMAR: Prepare 0-16MiB unity mapping for LPC [ 1.834920] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] [ 1.834991] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 1.835023] iommu: Adding device 0000:00:00.0 to group 0 [ 1.835035] iommu: Adding device 0000:00:01.0 to group 1 [ 1.835044] iommu: Adding device 0000:00:06.0 to group 2 [ 1.835052] iommu: Adding device 0000:00:1a.0 to group 3 [ 1.835058] iommu: Adding device 0000:00:1c.0 to group 4 [ 1.835065] iommu: Adding device 0000:00:1c.4 to group 5 [ 1.835071] iommu: Adding device 0000:00:1c.6 to group 6 [ 1.835078] iommu: Adding device 0000:00:1c.7 to group 7 [ 1.835084] iommu: Adding device 0000:00:1d.0 to group 8 [ 1.835090] iommu: Adding device 0000:00:1e.0 to group 9 [ 1.835100] iommu: Adding device 0000:00:1f.0 to group 10 [ 1.835108] iommu: Adding device 0000:00:1f.2 to group 10 [ 1.835111] iommu: Adding device 0000:07:00.0 to group 1 [ 1.835115] iommu: Adding device 0000:07:00.1 to group 1 [ 1.835137] iommu: Adding device 0000:03:00.0 to group 11 [ 1.835155] iommu: Adding device 0000:03:00.1 to group 11 [ 1.835162] iommu: Adding device 0000:04:00.0 to group 12 [ 1.835183] iommu: Adding device 0000:01:00.0 to group 13 [ 1.835193] iommu: Adding device 0000:01:00.1 to group 13 [ 1.835203] iommu: Adding device 0000:01:00.2 to group 13 [ 1.835213] iommu: Adding device 0000:01:00.4 to group 13 [ 1.836567] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 1.836568] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 1.836568] RAPL PMU: hw unit of domain package 2^-16 Joules [ 1.836569] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 1.837346] check: Scanning for low memory corruption every 60 seconds [ 1.899005] AVX2 or AES-NI instructions are not detected. [ 1.899005] AVX2 instructions are not detected. [ 1.899680] workingset: timestamp_bits=52 max_order=22 bucket_order=0 [ 1.901767] NFS: Registering the id_resolver key type [ 1.901773] Key type id_resolver registered [ 1.901774] Key type id_legacy registered [ 1.901777] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.901777] Installing knfsd (copyright (C) 1996 XXX@XXX). [ 1.901914] fuse init (API version 7.28) [ 1.955597] NET: Registered protocol family 38 [ 1.955598] async_tx: api initialized (async) [ 1.955600] Key type asymmetric registered [ 1.955600] Asymmetric key parser 'x509' registered [ 1.955609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.955610] io scheduler mq-deadline registered [ 1.955611] io scheduler kyber registered [ 1.955642] io scheduler bfq registered [ 1.955681] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 1.956171] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.956171] vesafb: scrolling: redraw [ 1.956173] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.956182] vesafb: framebuffer at 0xf9000000, mapped to 0x0000000095b0abc8, using 3072k, total 3072k [ 2.032739] Console: switching to colour frame buffer device 128x48 [ 2.106086] fb0: VESA VGA frame buffer device [ 2.106092] intel_idle: MWAIT substates: 0x1120 [ 2.106093] intel_idle: v0.4.1 model 0x3A [ 2.106290] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.106291] IPMI message handler: version 39.2 [ 2.106296] ipmi device interface [ 2.106319] ipmi_si: IPMI System Interface driver [ 2.106324] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 2.106326] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 2.106327] ipmi_si: Adding SMBIOS-specified kcs state machine [ 2.106331] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 2.106343] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 [ 2.106344] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 2.106344] ipmi_si: Adding ACPI-specified kcs state machine [ 2.106357] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 2.846111] tsc: Refined TSC clocksource calibration: 3292.520 MHz [ 2.846113] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 2.846147] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns [ 2.846188] clocksource: Switched to clocksource tsc [ 3.174726] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13) [ 3.213935] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 3.213937] ipmi_ssif: IPMI SSIF Interface driver [ 3.219438] IPMI Watchdog: driver initialized [ 3.219440] IPMI poweroff: Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot [ 3.222925] IPMI poweroff: ATCA Detect mfg 0xB prod 0x2000 [ 3.222927] IPMI poweroff: Found a chassis style poweroff function [ 3.223097] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.223100] ACPI: Power Button [PWRF] [ 3.223428] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.223428] ACPI: Thermal Zone [THM0] (8 C) [ 3.223447] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 3.228817] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.249396] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.249924] Linux agpgart interface v0.103 [ 3.250668] Floppy drive(s): fd0 is 1.44M [ 3.251329] brd: module loaded [ 3.254790] loop: module loaded [ 3.255403] ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (20181213/utaddress-213) [ 3.255406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 3.255418] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.255446] Emulex LightPulse Fibre Channel SCSI driver XXX.XXX.XXX.XXX [ 3.255446] Copyright (C) CB1B-50E7 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries. [ 3.255936] scsi host0: Emulex LPe11000 PCIe Fibre Channel Adapter on PCI bus 07 device 00 irq 16 [ 5.181548] scsi host1: Emulex LPe11000 PCIe Fibre Channel Adapter on PCI bus 07 device 01 irq 17 [ 6.286248] floppy0: no floppy controllers found [ 6.286267] work still pending [ 7.110770] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 7.110805] SCSI Media Changer driver v0.25 [ 7.110836] ahci 0000:00:1f.2: version 3.0 [ 7.110954] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 7.121062] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 7.121067] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst [ 7.266472] scsi host2: ahci [ 7.266706] scsi host3: ahci [ 7.266931] scsi host4: ahci [ 7.267072] scsi host5: ahci [ 7.267181] scsi host6: ahci [ 7.267365] scsi host7: ahci [ 7.267397] ata1: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0100 irq 27 [ 7.267398] ata2: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0180 irq 27 [ 7.267399] ata3: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0200 irq 27 [ 7.267401] ata4: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0280 irq 27 [ 7.267402] ata5: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0300 irq 27 [ 7.267403] ata6: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0380 irq 27 [ 7.267427] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 7.267730] tun: Universal TUN/TAP device driver, 1.6 [ 7.267786] tg3.c:v3.137 (May 11, 2014) [ 7.303744] tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address XX:XX:XX:XX:XX:XX [ 7.303745] tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 7.303747] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 7.303748] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 7.333683] tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address XX:XX:XX:XX:XX:XX [ 7.333684] tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 7.333685] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 7.333686] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 7.333783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.333784] ehci-pci: EHCI PCI platform driver [ 7.333862] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 7.333866] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 7.333875] ehci-pci 0000:00:1a.0: debug port 2 [ 7.337770] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 7.337778] ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000 [ 7.366086] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 7.366274] hub 1-0:1.0: USB hub found [ 7.366280] hub 1-0:1.0: 2 ports detected [ 7.366406] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 7.366409] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.366418] ehci-pci 0000:00:1d.0: debug port 2 [ 7.370301] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 7.370311] ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000 [ 7.396113] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 7.396286] hub 2-0:1.0: USB hub found [ 7.396291] hub 2-0:1.0: 2 ports detected [ 7.396345] uhci_hcd: USB Universal Host Controller Interface driver [ 7.396394] uhci_hcd 0000:01:00.4: UHCI Host Controller [ 7.396397] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3 [ 7.396412] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports [ 7.396436] uhci_hcd 0000:01:00.4: irq 16, io base 0x00004000 [ 7.396600] hub 3-0:1.0: USB hub found [ 7.396606] hub 3-0:1.0: 2 ports detected [ 7.396727] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 7.396730] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 7.396759] xhci_hcd 0000:04:00.0: Zeroing 64bit base registers, expecting fault [ 7.456772] xhci_hcd 0000:04:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000000100000410 [ 7.457092] hub 4-0:1.0: USB hub found [ 7.457099] hub 4-0:1.0: 2 ports detected [ 7.457170] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 7.457172] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 [ 7.457173] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 7.460237] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.460314] hub 5-0:1.0: USB hub found [ 7.460321] hub 5-0:1.0: 2 ports detected [ 7.460390] usbcore: registered new interface driver usb-storage [ 7.460417] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 7.465793] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.465796] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.465857] mousedev: PS/2 mouse device common for all mice [ 7.465909] rtc_cmos 00:01: RTC can wake from S4 [ 7.466196] rtc_cmos 00:01: registered as rtc0 [ 7.466216] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs [ 7.466239] IR NEC protocol handler initialized [ 7.466239] IR RC5(x/sz) protocol handler initialized [ 7.466239] IR RC6 protocol handler initialized [ 7.466240] IR JVC protocol handler initialized [ 7.466240] IR Sony protocol handler initialized [ 7.466240] IR SANYO protocol handler initialized [ 7.466241] IR Sharp protocol handler initialized [ 7.466241] IR MCE Keyboard/mouse protocol handler initialized [ 7.466241] IR XMP protocol handler initialized [ 7.466732] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED) [ 7.466826] intel_pstate: Intel P-state driver initializing [ 7.467381] usbcore: registered new interface driver usbhid [ 7.467382] usbhid: USB HID core driver [ 7.467880] NET: Registered protocol family 10 [ 7.468382] Segment Routing with IPv6 [ 7.468415] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 7.468591] NET: Registered protocol family 17 [ 7.468610] Bridge firewalling registered [ 7.468623] 8021q: 802.1Q VLAN Support v1.8 [ 7.468637] Key type dns_resolver registered [ 7.469461] microcode: sig=0x306a9, pf=0x2, revision=0x20 [ 7.469615] microcode: Microcode Update Driver: v2.2. [ 7.469624] AVX version of gcm_enc/dec engaged. [ 7.469625] AES CTR mode by8 optimization enabled [ 7.496701] sched_clock: Marking stable (7496467609, 224797)->(7510679757, -13987351) [ 7.497123] registered taskstats version 1 [ 7.500543] Key type encrypted registered [ 7.501094] rtc_cmos 00:01: setting system clock to 2019-03-16T10:15:42 UTC (1552731342) [ 7.576115] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 7.607687] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.608433] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 7.608436] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 7.610423] ata1.00: configured for UDMA/133 [ 7.610733] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 7.611108] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 7.611369] sd 2:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 7.611372] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 7.611407] sd 2:0:0:0: [sda] Write Protect is off [ 7.611411] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.611495] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.654919] sda: sda1 sda2 [ 7.656093] sd 2:0:0:0: [sda] Attached SCSI disk [ 7.736129] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 7.766112] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 7.766129] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 7.937584] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.938325] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 7.938328] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 7.939174] ata2.00: configured for UDMA/133 [ 7.939467] scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 7.939809] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 7.940183] sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 7.940196] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 7.940259] sd 3:0:0:0: [sdb] Write Protect is off [ 7.940272] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.940384] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.946758] hub 1-1:1.0: USB hub found [ 7.946855] hub 1-1:1.0: 6 ports detected [ 7.976762] hub 2-1:1.0: USB hub found [ 7.976879] hub 2-1:1.0: 6 ports detected [ 7.981048] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/0003:03F0:7029.0001/input/input6 [ 7.990881] sdb: sdb1 sdb2 [ 7.992238] sd 3:0:0:0: [sdb] Attached SCSI disk [ 8.046173] hid-generic 0003:03F0:7029.0001: input: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0 [ 8.050602] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/0003:03F0:7029.0002/input/input7 [ 8.050734] hid-generic 0003:03F0:7029.0002: input: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1 [ 8.266109] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 8.267579] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.268321] ata3.00: ATA-10: WDC WD30EFRX-68N32N0, 82.00A82, max UDMA/133 [ 8.268324] ata3.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 8.269169] ata3.00: configured for UDMA/133 [ 8.269428] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68N 0A82 PQ: 0 ANSI: 5 [ 8.269783] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 8.270070] sd 4:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 8.270073] sd 4:0:0:0: [sdc] 4096-byte physical blocks [ 8.270128] sd 4:0:0:0: [sdc] Write Protect is off [ 8.270131] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 8.270234] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.296107] usb 2-1.3: new high-speed USB device number 3 using ehci-pci [ 8.312418] sdc: sdc1 sdc2 [ 8.313729] sd 4:0:0:0: [sdc] Attached SCSI disk [ 8.429796] usb-storage 1-1.5:1.0: USB Mass Storage device detected [ 8.430240] usb-storage 1-1.5:1.1: USB Mass Storage device detected [ 8.446779] hub 2-1.3:1.0: USB hub found [ 8.447022] hub 2-1.3:1.0: 2 ports detected [ 8.466307] usb-storage 1-1.5:1.2: USB Mass Storage device detected [ 8.597538] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.598259] ata4.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133 [ 8.598262] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 8.599106] ata4.00: configured for UDMA/133 [ 8.599396] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 5 [ 8.599785] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 8.599924] sd 5:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 8.599927] sd 5:0:0:0: [sdd] 4096-byte physical blocks [ 8.599968] sd 5:0:0:0: [sdd] Write Protect is off [ 8.599972] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 8.600026] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.616103] usb 1-1.6: new low-speed USB device number 4 using ehci-pci [ 8.656709] sdd: sdd1 sdd2 [ 8.658135] sd 5:0:0:0: [sdd] Attached SCSI disk [ 8.781887] input: Avocent IBM 73P5832 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:0624:0296.0003/input/input8 [ 8.846168] hid-generic 0003:0624:0296.0003: input: USB HID v1.10 Keyboard [Avocent IBM 73P5832] on usb-0000:00:1a.0-1.6/input0 [ 8.852502] input: Avocent IBM 73P5832 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0624:0296.0004/input/input9 [ 8.852648] input: Avocent IBM 73P5832 Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0624:0296.0004/input/input10 [ 8.916198] input: Avocent IBM 73P5832 System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0624:0296.0004/input/input11 [ 8.916247] hid-generic 0003:0624:0296.0004: input: USB HID v1.10 Mouse [Avocent IBM 73P5832] on usb-0000:00:1a.0-1.6/input1 [ 8.927542] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.928595] ata5.00: ATA-9: TS256GSSD370S, O1225G, max UDMA/133 [ 8.928598] ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 8.929456] ata5.00: configured for UDMA/133 [ 8.929691] scsi 6:0:0:0: Direct-Access ATA TS256GSSD370S 5G PQ: 0 ANSI: 5 [ 8.929950] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 8.930259] sd 6:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 8.930283] sd 6:0:0:0: [sde] Write Protect is off [ 8.930286] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 8.930335] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.932262] sde: sde1 [ 8.933309] sd 6:0:0:0: [sde] Attached SCSI disk [ 9.257546] ata6: SATA link down (SStatus 0 SControl 300) [ 9.258273] Freeing unused kernel image memory: 1820K [ 9.296123] Write protecting the kernel read-only data: 18432k [ 9.296967] Freeing unused kernel image memory: 2004K [ 9.297279] Freeing unused kernel image memory: 652K [ 9.297331] Run /init as init process [ 10.311950] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX [ 10.353924] device-mapper: raid: Loading target version 1.14.0 [ 10.958349] md: md0 stopped. [ 10.959824] random: fast init done [ 10.961873] md/raid:md0: device sda2 operational as raid disk 0 [ 10.961875] md/raid:md0: device sdb2 operational as raid disk 3 [ 10.961876] md/raid:md0: device sdc2 operational as raid disk 2 [ 10.961877] md/raid:md0: device sdd2 operational as raid disk 1 [ 10.962161] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2 [ 10.996101] md0: detected capacity change from 0 to 9001340239872 [ 11.013418] random: lvm: uninitialized urandom read (4 bytes read) [ 11.186046] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 12.241974] random: crng init done [ 15.449478] udevd[3987]: starting version 3.2.7 [ 15.693050] vboxdrv: loading out-of-tree module taints kernel. [ 15.696545] vboxdrv: Found 8 processor cores [ 15.726411] vboxdrv: TSC mode is Invariant, tentative frequency 3292518195 Hz [ 15.726413] vboxdrv: Successfully loaded version 6.0.4 (interface 0x00290008) [ 15.740007] VBoxNetFlt: Successfully started. [ 15.757225] VBoxNetAdp: Successfully started. [ 15.765754] udevd[3987]: starting eudev-3.2.7 [ 15.773035] VBoxPciLinuxInit [ 15.773043] vboxpci: IOMMU found [ 15.832106] tg3 0000:03:00.0 eno1: renamed from eth0 [ 15.906467] tg3 0000:03:00.1 eno2: renamed from eth1 [ 16.195617] usbcore: registered new interface driver option [ 16.195638] usbserial: USB Serial support registered for GSM modem (1-port) [ 16.195801] option 1-1.5:1.0: GSM modem (1-port) converter detected [ 16.195902] usb 1-1.5: GSM modem (1-port) converter now attached to ttyUSB0 [ 16.195945] option 1-1.5:1.1: GSM modem (1-port) converter detected [ 16.196025] usb 1-1.5: GSM modem (1-port) converter now attached to ttyUSB1 [ 16.196088] option 1-1.5:1.2: GSM modem (1-port) converter detected [ 16.196159] usb 1-1.5: GSM modem (1-port) converter now attached to ttyUSB2 [ 16.938599] udevd[4111]: conflicting device node '/dev/mapper/XXXXXXXX found, link to '/dev/dm-0' will not be created [ 17.154116] udevd[4074]: conflicting device node '/dev/mapper/XXXXXXXXXXXXX found, link to '/dev/dm-12' will not be created [ 17.160201] udevd[4072]: conflicting device node '/dev/mapper/XXXXXXXX found, link to '/dev/dm-11' will not be created [ 17.720998] udevd[4076]: conflicting device node '/dev/mapper/XXXXXXX' found, link to '/dev/dm-2' will not be created [ 17.774969] udevd[4113]: conflicting device node '/dev/mapper/XXXXXXXX found, link to '/dev/dm-1' will not be created [ 17.946826] udevd[4094]: conflicting device node '/dev/mapper/XXXXXX found, link to '/dev/dm-5' will not be created [ 17.954468] udevd[4078]: conflicting device node '/dev/mapper/XXXXXXXXXXXX found, link to '/dev/dm-9' will not be created [ 18.077668] udevd[4104]: conflicting device node '/dev/mapper/XXXXXXX found, link to '/dev/dm-8' will not be created [ 18.111612] udevd[4105]: conflicting device node '/dev/mapper/XXXXXXXXXXX found, link to '/dev/dm-6' will not be created [ 22.953313] EXT4-fs (dm-2): re-mounted. Opts: (null) [ 23.343122] Adding 16777212k swap on /dev/mapper/XXXXXXXX Priority:-2 extents:1 across:16777212k FS [ 23.514611] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 23.560803] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 23.614538] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 23.657937] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 23.709217] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 23.769542] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null) [ 23.812713] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 23.876929] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null) [ 23.973208] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) [ 24.050096] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null) [ 24.145410] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null) [ 24.231976] EXT4-fs (dm-16): mounted filesystem with ordered data mode. Opts: (null) [ 24.271220] EXT4-fs (dm-12): mounted filesystem with ordered data mode. Opts: (null) [ 24.301852] EXT4-fs (dm-13): mounted filesystem with ordered data mode. Opts: (null) [ 24.309110] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null) [ 24.420837] EXT4-fs (dm-17): mounted filesystem with ordered data mode. Opts: (null) [ 27.926069] 8021q: adding VLAN 0 to HW filter on device bond0 [ 28.011489] 8021q: adding VLAN 0 to HW filter on device bond0 [ 28.140368] bond0: Enslaving eno1 as a backup interface with a down link [ 28.268104] bond0: Enslaving eno2 as a backup interface with a down link [ 31.710587] tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex [ 31.710597] tg3 0000:03:00.0 eno1: Flow control is on for TX and on for RX [ 31.710600] tg3 0000:03:00.0 eno1: EEE is disabled [ 31.746150] bond0: link status definitely up for interface eno1, 1000 Mbps full duplex [ 31.746154] bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond [ 31.746161] bond0: first active interface up! [ 31.746212] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 31.844916] tg3 0000:03:00.1 eno2: Link is up at 1000 Mbps, full duplex [ 31.844925] tg3 0000:03:00.1 eno2: Flow control is on for TX and on for RX [ 31.844928] tg3 0000:03:00.1 eno2: EEE is disabled [ 31.856171] bond0: link status definitely up for interface eno2, 1000 Mbps full duplex [ 49.506183] usb 3-1: USB disconnect, device number 2 [ 75.352461] usb 3-1: new full-speed USB device number 3 using uhci_hcd [ 75.556512] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/0003:03F0:7029.0005/input/input12 [ 75.622481] hid-generic 0003:03F0:7029.0005: input: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0 [ 75.626500] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/0003:03F0:7029.0006/input/input13 [ 75.626735] hid-generic 0003:03F0:7029.0006: input: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1 [ 119.434228] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 119.452321] NFSD: starting 90-second grace period (net f00000a0) [ 214.240680] usb 3-1: USB disconnect, device number 3 [ 1633.371451] usb 3-1: new full-speed USB device number 4 using uhci_hcd [ 1633.575671] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/0003:03F0:7029.0007/input/input14 [ 1633.651551] hid-generic 0003:03F0:7029.0007: input: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0 [ 1633.655346] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/0003:03F0:7029.0008/input/input15 [ 1633.721591] hid-generic 0003:03F0:7029.0008: input: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1 [ 2196.254761] usb 3-1: USB disconnect, device number 4 [ 9082.372279] perl[43745]: segfault at 7ffd13b13fe8 ip 000055b10b4a89ca sp 00007ffd13b13ff0 error 6 in perl[55b10b410000+277000] [ 9082.372285] Code: 41 57 41 56 41 55 49 89 d5 41 54 49 89 fc 55 48 89 f5 48 89 d6 53 48 83 ec 38 64 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 <e8> 41 09 13 00 48 83 c0 01 48 89 44 24 18 48 3d ff ff ff 7f 0f 86 [ 9082.413272] perl[43757]: segfault at 7ffd3570dff8 ip 0000564ad9254e09 sp 00007ffd3570e000 error 6 in perl[564ad91bd000+277000] [ 9082.413279] Code: f3 3a 00 48 8d 05 a5 01 1f 00 48 0f 45 d0 89 de 48 8d 3d ca 21 1f 00 31 c0 e8 c3 36 11 00 0f 1f 00 41 56 41 55 41 54 49 89 fc <55> 48 89 d5 53 48 89 f3 48 83 ec 20 4c 8b 6e 08 64 48 8b 04 25 28 [ 9082.475698] perl[43789]: segfault at 7ffd8649eff8 ip 0000563fd15d580e sp 00007ffd8649eff0 error 6 in perl[563fd140d000+277000] [ 9082.475705] Code: 01 00 48 8b 44 24 08 49 8d 04 c7 e9 54 fd ff ff e8 47 35 fe ff 0f 1f 80 00 00 00 00 41 54 55 48 89 fd 53 48 89 f3 48 83 ec 10 <48> 89 54 24 08 f6 46 0e 80 0f 85 93 00 00 00 48 8b 03 48 8b 74 24 [ 9082.616546] perl[43884]: segfault at 7fff44863fe8 ip 000055d47afc4286 sp 00007fff44863ff0 error 6 in perl[55d47af2b000+277000] [ 9082.616553] Code: f0 e8 2e 72 1c 00 83 f8 ff 74 aa 8b 0b 85 c9 74 09 48 39 ab 08 01 00 00 74 4a 48 89 ab 08 01 00 00 48 89 ea 48 89 de 4c 89 f7 <e8> 75 eb ff ff 8b 13 85 d2 74 85 48 39 ab 08 01 00 00 0f 85 78 ff [ 9082.698411] perl[43934]: segfault at 7ffe1c292fe8 ip 0000557353dbce2c sp 00007ffe1c292ff0 error 6 in perl[557353d25000+277000] [ 9082.698420] Code: 41 55 41 54 49 89 fc 55 48 89 d5 53 48 89 f3 48 83 ec 20 4c 8b 6e 08 64 48 8b 04 25 28 00 00 00 48 89 44 24 18 31 c0 4c 89 ee <e8> 4f 28 14 00 48 85 c0 0f 84 ee 01 00 00 49 8d 94 24 50 01 00 00 [ 9082.858944] perl[44000]: segfault at 7ffd48cc5fd8 ip 0000556cef1f59ca sp 00007ffd48cc5fe0 error 6 in perl[556cef15d000+277000] [ 9082.858953] Code: 41 57 41 56 41 55 49 89 d5 41 54 49 89 fc 55 48 89 f5 48 89 d6 53 48 83 ec 38 64 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 <e8> 41 09 13 00 48 83 c0 01 48 89 44 24 18 48 3d ff ff ff 7f 0f 86 [ 9082.943001] perl[44020]: segfault at 7fff48c6aff8 ip 00005620267f816c sp 00007fff48c6b000 error 6 in perl[56202675f000+277000] [ 9082.943008] Code: 89 9d b0 00 00 00 48 89 85 b8 00 00 00 e9 30 fd ff ff e8 27 80 f6 ff 0f 1f 80 00 00 00 00 41 57 41 56 49 89 fe 41 55 41 54 55 <53> 48 89 f3 48 83 ec 18 44 8b 62 0c 48 8b 6a 10 41 81 e4 00 08 00 [ 9083.055921] perl[44079]: segfault at 7ffdc0d33f94 ip 00007f29e56e2199 sp 00007ffdc0d33f80 error 6 in libc-2.28.so[7f29e567a000+15d000] [ 9083.055928] Code: f1 fb ff ff 48 85 c0 75 d8 eb 96 66 0f 1f 44 00 00 48 89 ef e8 68 d0 ff ff e9 f6 fc ff ff 0f 1f 00 48 89 d8 48 89 df 48 89 d9 <44> 89 7c 24 14 48 c1 e8 06 48 c1 ef 09 48 89 de 48 89 44 24 38 48 [ 9083.133485] perl[44106]: segfault at 7fff50726ff4 ip 00007f7cd6065199 sp 00007fff50726fe0 error 6 in libc-2.28.so[7f7cd5ffd000+15d000] [ 9083.133493] Code: f1 fb ff ff 48 85 c0 75 d8 eb 96 66 0f 1f 44 00 00 48 89 ef e8 68 d0 ff ff e9 f6 fc ff ff 0f 1f 00 48 89 d8 48 89 df 48 89 d9 <44> 89 7c 24 14 48 c1 e8 06 48 c1 ef 09 48 89 de 48 89 44 24 38 48 [ 9083.170783] perl[44125]: segfault at 7ffdaebc3ff8 ip 00007f0747ecc446 sp 00007ffdaebc4000 error 6 in libc-2.28.so[7f0747e63000+15d000] [ 9083.170790] Code: 08 64 48 33 04 25 28 00 00 00 75 05 48 83 c4 18 c3 e8 ae ff 08 00 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 41 56 41 55 41 54 <55> 53 48 83 ec 20 64 48 8b 04 25 28 00 00 00 48 89 44 24 18 31 c0 [83689.214822] printk: udevd: 9 output lines suppressed due to ratelimiting [83689.239992] udevd[41015]: starting version 3.2.7 [83689.652505] udevd[41015]: starting eudev-3.2.7