[ 9197.255206] wlp58s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [ 9197.703037] PM: hibernation: hibernation entry [ 9197.708025] Filesystems sync: 0.004 seconds [ 9197.708027] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 9197.710150] OOM killer disabled. [ 9197.710663] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 9197.710669] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff] [ 9197.710676] PM: hibernation: Marking nosave pages: [mem 0x927fc000-0x92844fff] [ 9197.710681] PM: hibernation: Marking nosave pages: [mem 0x966ab000-0x97c0efff] [ 9197.710860] PM: hibernation: Marking nosave pages: [mem 0x97c10000-0xffffffff] [ 9197.714015] PM: hibernation: Basic memory bitmaps created [ 9197.714018] PM: hibernation: Preallocating image memory [ 9198.579313] PM: hibernation: Allocated 2118984 pages for snapshot [ 9198.579316] PM: hibernation: Allocated 8475936 kbytes in 0.86 seconds (9855.73 MB/s) [ 9198.579318] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9198.581016] printk: Suspending console(s) (use no_console_suspend to debug) [ 9198.815464] ACPI: EC: interrupt blocked [ 9198.825628] Disabling non-boot CPUs ... [ 9198.827161] smpboot: CPU 1 is now offline [ 9198.829626] smpboot: CPU 2 is now offline [ 9198.832525] smpboot: CPU 3 is now offline [ 9198.834816] smpboot: CPU 4 is now offline [ 9198.836920] smpboot: CPU 5 is now offline [ 9198.839163] smpboot: CPU 6 is now offline [ 9198.841373] smpboot: CPU 7 is now offline [ 9198.844816] PM: hibernation: Creating image: [ 9199.150183] PM: hibernation: Need to copy 2097453 pages [ 9199.150185] PM: hibernation: Normal pages needed: 2097453 + 1024, available pages: 6240948 [ 9200.449459] PM: hibernation: Image created (2097453 pages copied) [ 9198.845836] Enabling non-boot CPUs ... [ 9198.846017] x86: Booting SMP configuration: [ 9198.846018] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9198.846683] CPU1 is up [ 9198.846839] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 9198.847477] CPU2 is up [ 9198.847622] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 9198.848267] CPU3 is up [ 9198.848406] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 9198.849139] CPU4 is up [ 9198.849275] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 9198.849904] CPU5 is up [ 9198.850032] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 9198.850674] CPU6 is up [ 9198.850816] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 9198.851459] CPU7 is up [ 9198.853913] ACPI: EC: interrupt unblocked [ 9198.907411] nvme nvme0: 8/0/0 default/read/poll queues [ 9198.917158] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 9198.917160] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 9199.143522] PM: Using 3 thread(s) for compression [ 9199.143526] PM: Compressing and saving image data (2101550 pages)... [ 9199.143539] PM: Image saving progress: 0% [ 9199.144766] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 9199.870672] PM: Image saving progress: 10% [ 9200.524343] PM: Image saving progress: 20% [ 9201.170446] PM: Image saving progress: 30% [ 9201.962381] PM: Image saving progress: 40% [ 9202.635209] PM: Image saving progress: 50% [ 9203.298419] PM: Image saving progress: 60% [ 9203.885793] PM: Image saving progress: 70% [ 9204.393267] PM: Image saving progress: 80% [ 9204.932868] PM: Image saving progress: 90% [ 9205.486921] PM: Image saving done [ 9205.486924] PM: hibernation: Wrote 8406200 kbytes in 6.34 seconds (1325.89 MB/s) [ 9205.487050] PM: S| [ 9205.652601] printk: Suspending console(s) (use no_console_suspend to debug) [ 9205.750260] e1000e: EEE TX LPI TIMER: 00000011 [ 9205.905373] ACPI: EC: interrupt blocked [ 9205.996099] ACPI: Preparing to enter system sleep state S3 [ 9205.997367] ACPI: EC: event blocked [ 9205.997368] ACPI: EC: EC stopped [ 9205.997369] PM: Saving platform NVS memory [ 9205.997391] Disabling non-boot CPUs ... [ 9205.998916] smpboot: CPU 1 is now offline [ 9206.000940] smpboot: CPU 2 is now offline [ 9206.003399] smpboot: CPU 3 is now offline [ 9206.005464] smpboot: CPU 4 is now offline [ 9206.007858] smpboot: CPU 5 is now offline [ 9206.009629] smpboot: CPU 6 is now offline [ 9206.011533] smpboot: CPU 7 is now offline [ 9206.015587] ACPI: Low-level resume complete [ 9206.015705] ACPI: EC: EC started [ 9206.015706] PM: Restoring platform NVS memory [ 9206.019495] Enabling non-boot CPUs ... [ 9206.019721] x86: Booting SMP configuration: [ 9206.019722] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 9206.023362] CPU1 is up [ 9206.023532] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 9206.025255] CPU2 is up [ 9206.025393] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 9206.027120] CPU3 is up [ 9206.027265] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 9206.027945] CPU4 is up [ 9206.028086] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 9206.028709] CPU5 is up [ 9206.028824] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 9206.029454] CPU6 is up [ 9206.029573] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 9206.030211] CPU7 is up [ 9206.032368] ACPI: Waking up from system sleep state S3 [ 9206.037586] hp_wmi: Unknown event_id - 23 - 0x0 [ 9206.100815] ACPI: EC: interrupt unblocked [ 9207.358891] ACPI: EC: event unblocked [ 9207.367289] hp_wmi: Unknown event_id - 23 - 0x1 [ 9207.378247] nvme nvme0: 8/0/0 default/read/poll queues [ 9207.616676] usb 1-9: reset high-speed USB device number 7 using xhci_hcd [ 9207.843749] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=1 [ 9207.897393] usb 1-10: reset full-speed USB device number 9 using xhci_hcd [ 9208.161188] usb 1-8: reset full-speed USB device number 6 using xhci_hcd [ 9208.423977] usb 1-2: reset high-speed USB device number 3 using xhci_hcd [ 9208.723874] psmouse serio3: synaptics: queried max coordinates: x [..5646], y [..4694] [ 9208.757264] psmouse serio3: synaptics: queried min coordinates: x [1294..], y [1156..] [ 9208.867457] usb 1-2.1: reset full-speed USB device number 5 using xhci_hcd [ 9209.037741] usb 1-2.2: reset full-speed USB device number 8 using xhci_hcd [ 9209.088186] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 9209.088191] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 9209.260229] acpi LNXPOWER:07: Turning OFF [ 9209.260460] acpi LNXPOWER:03: Turning OFF [ 9209.263259] acpi LNXPOWER:00: Turning OFF [ 9209.263747] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 9209.265513] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017 [ 9209.266537] Bluetooth: hci0: Device revision is 1 [ 9209.266543] Bluetooth: hci0: Secure boot is enabled [ 9209.266546] Bluetooth: hci0: OTP lock is enabled [ 9209.266548] Bluetooth: hci0: API lock is enabled [ 9209.266550] Bluetooth: hci0: Debug lock is disabled [ 9209.266552] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 9209.266947] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi [ 9209.331445] PM: hibernation: Basic memory bitmaps freed [ 9209.331448] OOM killer enabled. [ 9209.331448] Restarting tasks ... [ 9209.331554] pci_bus 0000:03: Allocating resources [ 9209.331571] pci_bus 0000:39: Allocating resources [ 9209.332954] done. [ 9209.366687] pci_bus 0000:03: Allocating resources [ 9209.366704] pci_bus 0000:39: Allocating resources [ 9209.374183] PM: hibernation: hibernation exit [ 9209.594358] i2c_hid i2c-SYNA3092:00: supply vdd not found, using dummy regulator [ 9209.594422] i2c_hid i2c-SYNA3092:00: supply vddl not found, using dummy regulator [ 9209.733544] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 9209.756278] input: SYNA3092:00 06CB:CD78 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.000E/input/input74 [ 9209.756533] input: SYNA3092:00 06CB:CD78 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.000E/input/input75 [ 9209.756825] hid-multitouch 0018:06CB:CD78.000E: input,hidraw6: I2C HID v1.00 Mouse [SYNA3092:00 06CB:CD78] on i2c-SYNA3092:00 [ 9210.988184] Bluetooth: hci0: Waiting for firmware download to complete [ 9210.988472] Bluetooth: hci0: Firmware loaded in 1683919 usecs [ 9210.988494] Bluetooth: hci0: Waiting for device to boot [ 9211.003478] Bluetooth: hci0: Device booted in 14650 usecs [ 9211.003503] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc [ 9211.005431] Bluetooth: hci0: Applying Intel DDC parameters completed [ 9211.008447] Bluetooth: hci0: Firmware revision 0.0 build 118 week 15 2021 [ 9211.582225] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 9211.582242] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 9211.582399] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 9215.643890] wlp58s0: authenticate with XXX [ 9215.648337] wlp58s0: send auth to XXX (try 1/3) [ 9215.691375] wlp58s0: authenticated [ 9215.696622] wlp58s0: associate with XXX (try 1/3) [ 9215.704741] wlp58s0: RX AssocResp from XXX (capab=0x411 status=0 aid=4) [ 9215.727430] wlp58s0: associated [ 9215.764889] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready [10117.554175] EXT4-fs error (device dm-0): ext4_validate_inode_bitmap:105: comm soffice.bin: Corrupt inode bitmap - block_group = 3504, inode_bitmap = 114819088 [12978.837892] wlp58s0: deauthenticating from XXX by local choice (Reason: 3=DEAUTH_LEAVING) [24521.859562] PM: hibernation: hibernation entry [24521.864181] Filesystems sync: 0.003 seconds [24521.864185] Freezing user space processes ... (elapsed 0.002 seconds) done. [24521.866355] OOM killer disabled. [24521.866547] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff] [24521.866550] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff] [24521.866552] PM: hibernation: Marking nosave pages: [mem 0x927fc000-0x92844fff] [24521.866554] PM: hibernation: Marking nosave pages: [mem 0x966ab000-0x97c0efff] [24521.866622] PM: hibernation: Marking nosave pages: [mem 0x97c10000-0xffffffff] [24521.867833] PM: hibernation: Basic memory bitmaps created [24521.867835] PM: hibernation: Preallocating image memory [24526.347392] PM: hibernation: Allocated 3221133 pages for snapshot [24526.347395] PM: hibernation: Allocated 12884532 kbytes in 4.47 seconds (2882.44 MB/s) [24526.347397] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [24526.349160] printk: Suspending console(s) (use no_console_suspend to debug) [24526.556717] ACPI: EC: interrupt blocked [24526.575401] Disabling non-boot CPUs ... [24526.576663] smpboot: CPU 1 is now offline [24526.578629] smpboot: CPU 2 is now offline [24526.580308] smpboot: CPU 3 is now offline [24526.581890] smpboot: CPU 4 is now offline [24526.583549] smpboot: CPU 5 is now offline [24526.585158] smpboot: CPU 6 is now offline [24526.586889] smpboot: CPU 7 is now offline [24526.589647] PM: hibernation: Creating image: [24526.861731] PM: hibernation: Need to copy 3215351 pages [24526.861733] PM: hibernation: Normal pages needed: 3215351 + 1024, available pages: 5123041 [24528.701756] PM: hibernation: Image created (3215351 pages copied) [24526.590714] Enabling non-boot CPUs ... [24526.590885] x86: Booting SMP configuration: [24526.590886] smpboot: Booting Node 0 Processor 1 APIC 0x2 [24526.591523] CPU1 is up [24526.591689] smpboot: Booting Node 0 Processor 2 APIC 0x4 [24526.592299] CPU2 is up [24526.592439] smpboot: Booting Node 0 Processor 3 APIC 0x6 [24526.593058] CPU3 is up [24526.593205] smpboot: Booting Node 0 Processor 4 APIC 0x1 [24526.593910] CPU4 is up [24526.594037] smpboot: Booting Node 0 Processor 5 APIC 0x3 [24526.594636] CPU5 is up [24526.594757] smpboot: Booting Node 0 Processor 6 APIC 0x5 [24526.595364] CPU6 is up [24526.595482] smpboot: Booting Node 0 Processor 7 APIC 0x7 [24526.596096] CPU7 is up [24526.598502] ACPI: EC: interrupt unblocked [24526.648913] nvme nvme0: 8/0/0 default/read/poll queues [24526.657735] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [24526.657738] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [24526.808487] PM: Using 3 thread(s) for compression [24526.808494] PM: Compressing and saving image data (3221631 pages)... [24526.808511] PM: Image saving progress: 0% [24526.808677] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [24527.911305] PM: Image saving progress: 10% [24529.103745] PM: Image saving progress: 20% [24530.037881] PM: Image saving progress: 30% [24530.974368] PM: Image saving progress: 40% [24532.105087] PM: Image saving progress: 50% [24533.232337] PM: Image saving progress: 60% [24534.337620] PM: Image saving progress: 70% [24538.550213] e1000e 0000:00:1f.6 enp0s31f6: Detected Hardware Unit Hang: TDH <0> TDT <8> next_to_use <8> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <1006ee73b> next_to_watch <0> jiffies <1006ef440> next_to_watch.status <0> MAC Status <43> PHY Status <796d> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> [24540.683758] e1000e 0000:00:1f.6 enp0s31f6: Detected Hardware Unit Hang: TDH <0> TDT <8> next_to_use <8> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <1006ee73b> next_to_watch <0> jiffies <1006ef6c0> next_to_watch.status <0> MAC Status <43> PHY Status <796d> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> [24542.603937] e1000e 0000:00:1f.6 enp0s31f6: Detected Hardware Unit Hang: TDH <0> TDT <8> next_to_use <8> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <1006ee73b> next_to_watch <0> jiffies <1006ef900> next_to_watch.status <0> MAC Status <43> PHY Status <796d> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> [24544.737167] e1000e 0000:00:1f.6 enp0s31f6: Detected Hardware Unit Hang: TDH <0> TDT <8> next_to_use <8> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <1006ee73b> next_to_watch <0> jiffies <1006efb80> next_to_watch.status <0> MAC Status <43> PHY Status <796d> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> [24546.240679] PM: hibernation: Wrote 12886524 kbytes in 19.43 seconds (663.22 MB/s) [24546.566277] PM: hibernation: Basic memory bitmaps freed [24546.566280] OOM killer enabled. [24546.566281] Restarting tasks ... done. [24546.575056] thermal thermal_zone13: failed to read out thermal zone (-61) [24546.579313] PM: hibernation: hibernation exit [24546.656774] e1000e 0000:00:1f.6 enp0s31f6: Detected Hardware Unit Hang: TDH <0> TDT <8> next_to_use <8> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <1006ee73b> next_to_watch <0> jiffies <1006efdc0> next_to_watch.status <0> MAC Status <43> PHY Status <796d> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> [24546.975649] i2c_hid i2c-SYNA3092:00: supply vdd not found, using dummy regulator [24546.975675] i2c_hid i2c-SYNA3092:00: supply vddl not found, using dummy regulator [24547.076918] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [24547.135618] input: SYNA3092:00 06CB:CD78 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.000F/input/input77 [24547.135674] input: SYNA3092:00 06CB:CD78 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.000F/input/input78 [24547.135733] hid-multitouch 0018:06CB:CD78.000F: input,hidraw6: I2C HID v1.00 Mouse [SYNA3092:00 06CB:CD78] on i2c-SYNA3092:00 [24548.811154] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [24548.811169] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [24548.811306] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [26347.453371] PM: hibernation: hibernation entry [26347.466546] Filesystems sync: 0.004 seconds [26347.466556] Freezing user space processes ... (elapsed 0.004 seconds) done. [26347.470770] OOM killer disabled. [26347.471364] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff] [26347.471371] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff] [26347.471379] PM: hibernation: Marking nosave pages: [mem 0x927fc000-0x92844fff] [26347.471386] PM: hibernation: Marking nosave pages: [mem 0x966ab000-0x97c0efff] [26347.471605] PM: hibernation: Marking nosave pages: [mem 0x97c10000-0xffffffff] [26347.475506] PM: hibernation: Basic memory bitmaps created [26347.475510] PM: hibernation: Preallocating image memory [26348.610696] PM: hibernation: Allocated 3140856 pages for snapshot [26348.610700] PM: hibernation: Allocated 12563424 kbytes in 1.13 seconds (11118.07 MB/s) [26348.610702] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [26348.612380] printk: Suspending console(s) (use no_console_suspend to debug) [26348.862212] ACPI: EC: interrupt blocked [26348.872094] Disabling non-boot CPUs ... [26348.873368] smpboot: CPU 1 is now offline [26348.875153] smpboot: CPU 2 is now offline [26348.876869] smpboot: CPU 3 is now offline [26348.878854] smpboot: CPU 4 is now offline [26348.880509] smpboot: CPU 5 is now offline [26348.882081] smpboot: CPU 6 is now offline [26348.883699] smpboot: CPU 7 is now offline [26348.886536] PM: hibernation: Creating image: [26349.169065] PM: hibernation: Need to copy 3134704 pages [26349.169067] PM: hibernation: Normal pages needed: 3134704 + 1024, available pages: 5203694 [26350.988600] PM: hibernation: Image created (3134704 pages copied) [26348.887598] Enabling non-boot CPUs ... [26348.887744] x86: Booting SMP configuration: [26348.887744] smpboot: Booting Node 0 Processor 1 APIC 0x2 [26348.888364] CPU1 is up [26348.888511] smpboot: Booting Node 0 Processor 2 APIC 0x4 [26348.889126] CPU2 is up [26348.889252] smpboot: Booting Node 0 Processor 3 APIC 0x6 [26348.889874] CPU3 is up [26348.890014] smpboot: Booting Node 0 Processor 4 APIC 0x1 [26348.890714] CPU4 is up [26348.890863] smpboot: Booting Node 0 Processor 5 APIC 0x3 [26348.891479] CPU5 is up [26348.891617] smpboot: Booting Node 0 Processor 6 APIC 0x5 [26348.892250] CPU6 is up [26348.892397] smpboot: Booting Node 0 Processor 7 APIC 0x7 [26348.893018] CPU7 is up [26348.895678] ACPI: EC: interrupt unblocked [26348.949412] nvme nvme0: 8/0/0 default/read/poll queues [26348.956344] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [26348.956352] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [26349.107544] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [26349.107842] PM: Using 3 thread(s) for compression [26349.107849] PM: Compressing and saving image data (3140827 pages)... [26349.107872] PM: Image saving progress: 0% [26350.143635] PM: Image saving progress: 10% [26351.277581] PM: Image saving progress: 20% [26352.247086] PM: Image saving progress: 30% [26353.134003] PM: Image saving progress: 40% [26354.191198] PM: Image saving progress: 50% [26355.276666] PM: Image saving progress: 60% [26356.404807] PM: Image saving progress: 70% [26357.385698] PM: Image saving progress: 80% [26358.125016] PM: hibernation: Wrote 12563308 kbytes in 9.01 seconds (1394.37 MB/s) [26358.451748] PM: hibernation: Basic memory bitmaps freed [26358.451752] OOM killer enabled. [26358.451753] Restarting tasks ... done. [26358.470831] thermal thermal_zone13: failed to read out thermal zone (-61) [26358.476312] PM: hibernation: hibernation exit [26358.628251] i2c_hid i2c-SYNA3092:00: supply vdd not found, using dummy regulator [26358.628278] i2c_hid i2c-SYNA3092:00: supply vddl not found, using dummy regulator [26358.735474] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [26358.787593] input: SYNA3092:00 06CB:CD78 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.0010/input/input80 [26358.787739] input: SYNA3092:00 06CB:CD78 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.0010/input/input81 [26358.787841] hid-multitouch 0018:06CB:CD78.0010: input,hidraw6: I2C HID v1.00 Mouse [SYNA3092:00 06CB:CD78] on i2c-SYNA3092:00 [26360.457032] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [26360.457038] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [26360.457128] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [29253.595326] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [45061.710981] PM: hibernation: hibernation entry [45061.716908] Filesystems sync: 0.003 seconds [45061.716915] Freezing user space processes ... (elapsed 0.004 seconds) done. [45061.720942] OOM killer disabled. [45061.721786] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff] [45061.721796] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff] [45061.721799] PM: hibernation: Marking nosave pages: [mem 0x927fc000-0x92844fff] [45061.721802] PM: hibernation: Marking nosave pages: [mem 0x966ab000-0x97c0efff] [45061.721880] PM: hibernation: Marking nosave pages: [mem 0x97c10000-0xffffffff] [45061.723268] PM: hibernation: Basic memory bitmaps created [45061.723278] PM: hibernation: Preallocating image memory [45074.445993] PM: hibernation: Allocated 3009725 pages for snapshot [45074.445996] PM: hibernation: Allocated 12038900 kbytes in 12.72 seconds (946.45 MB/s) [45074.445998] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [45074.447909] printk: Suspending console(s) (use no_console_suspend to debug) [45074.683152] ACPI: EC: interrupt blocked [45074.700892] Disabling non-boot CPUs ... [45074.702428] smpboot: CPU 1 is now offline [45074.704137] smpboot: CPU 2 is now offline [45074.705842] smpboot: CPU 3 is now offline [45074.707815] smpboot: CPU 4 is now offline [45074.709512] smpboot: CPU 5 is now offline [45074.711119] smpboot: CPU 6 is now offline [45074.712790] smpboot: CPU 7 is now offline [45074.715733] PM: hibernation: Creating image: [45075.012763] PM: hibernation: Need to copy 2995728 pages [45075.012765] PM: hibernation: Normal pages needed: 2995728 + 1024, available pages: 5342667 [45076.769129] PM: hibernation: Image created (2995728 pages copied) [45074.716786] Enabling non-boot CPUs ... [45074.716964] x86: Booting SMP configuration: [45074.716965] smpboot: Booting Node 0 Processor 1 APIC 0x2 [45074.717580] CPU1 is up [45074.717734] smpboot: Booting Node 0 Processor 2 APIC 0x4 [45074.718363] CPU2 is up [45074.718502] smpboot: Booting Node 0 Processor 3 APIC 0x6 [45074.719132] CPU3 is up [45074.719270] smpboot: Booting Node 0 Processor 4 APIC 0x1 [45074.719948] CPU4 is up [45074.720093] smpboot: Booting Node 0 Processor 5 APIC 0x3 [45074.720726] CPU5 is up [45074.720855] smpboot: Booting Node 0 Processor 6 APIC 0x5 [45074.721458] CPU6 is up [45074.721583] smpboot: Booting Node 0 Processor 7 APIC 0x7 [45074.722203] CPU7 is up [45074.724682] ACPI: EC: interrupt unblocked [45074.774484] nvme nvme0: 8/0/0 default/read/poll queues [45074.786541] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [45074.786543] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [45074.937205] PM: Using 3 thread(s) for compression [45074.937211] PM: Compressing and saving image data (3001580 pages)... [45074.937227] PM: Image saving progress: 0% [45074.937213] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [45075.887952] PM: Image saving progress: 10% [45076.840923] PM: Image saving progress: 20% [45077.740325] PM: Image saving progress: 30% [45078.417134] PM: hibernation: Wrote 12006320 kbytes in 3.47 seconds (3460.03 MB/s) [45078.689639] PM: hibernation: Basic memory bitmaps freed [45078.689642] OOM killer enabled. [45078.689643] Restarting tasks ... done. [45078.698846] thermal thermal_zone13: failed to read out thermal zone (-61) [45078.703518] PM: hibernation: hibernation exit [45079.791232] i2c_hid i2c-SYNA3092:00: supply vdd not found, using dummy regulator [45079.791331] i2c_hid i2c-SYNA3092:00: supply vddl not found, using dummy regulator [45079.855917] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [45079.951202] input: SYNA3092:00 06CB:CD78 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.0011/input/input83 [45079.951269] input: SYNA3092:00 06CB:CD78 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.0011/input/input84 [45079.951353] hid-multitouch 0018:06CB:CD78.0011: input,hidraw6: I2C HID v1.00 Mouse [SYNA3092:00 06CB:CD78] on i2c-SYNA3092:00 [45081.593354] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [45081.593367] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [45081.593505] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [84789.857712] usb 1-1: USB disconnect, device number 2 [84793.034034] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [84793.052719] usb 2-1: New USB device found, idVendor=0951, idProduct=168e, bcdDevice= 1.00 [84793.052738] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [84793.052747] usb 2-1: Product: DT Rubber 3.0 [84793.052753] usb 2-1: Manufacturer: Kingston [84793.052759] usb 2-1: SerialNumber: ... [84793.682044] usb-storage 2-1:1.0: USB Mass Storage device detected [84793.682307] scsi host0: usb-storage 2-1:1.0 [84793.682425] usbcore: registered new interface driver usb-storage [84793.685450] usbcore: registered new interface driver uas [84794.684781] scsi 0:0:0:0: Direct-Access Kingston DT Rubber 3.0 PMAP PQ: 0 ANSI: 6 [84794.685612] sd 0:0:0:0: Attached scsi generic sg0 type 0 [84794.686006] sd 0:0:0:0: [sda] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [84794.686875] sd 0:0:0:0: [sda] Write Protect is off [84794.686882] sd 0:0:0:0: [sda] Mode Sense: 2b 80 00 08 [84794.687749] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [84794.786951] sda: sda1 [84794.789097] sd 0:0:0:0: [sda] Write Protect is on [84794.789100] sd 0:0:0:0: [sda] Mode Sense: 2b 80 80 08 [84794.789965] sd 0:0:0:0: [sda] Attached SCSI removable disk [84808.709858] usb 2-1: USB disconnect, device number 2 [84811.663891] usb 1-1: new full-speed USB device number 14 using xhci_hcd [84811.807353] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11 [84811.807372] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [84811.807380] usb 1-1: Product: USB Receiver [84811.807386] usb 1-1: Manufacturer: Logitech [84811.816778] logitech-djreceiver 0003:046D:C52B.0014: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2 [84811.940162] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0014/0003:046D:406F.0015/input/input86 [84811.941778] logitech-hidpp-device 0003:046D:406F.0015: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.0-1/input2:1 [84814.890645] usb 1-2.4: new high-speed USB device number 15 using xhci_hcd [84815.115749] usb 1-2.4: New USB device found, idVendor=0951, idProduct=168e, bcdDevice= 1.00 [84815.115766] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [84815.115774] usb 1-2.4: Product: DT Rubber 3.0 [84815.115779] usb 1-2.4: Manufacturer: Kingston [84815.115784] usb 1-2.4: SerialNumber: ... [84815.120089] usb-storage 1-2.4:1.0: USB Mass Storage device detected [84815.120805] scsi host0: usb-storage 1-2.4:1.0 [84815.673874] logitech-hidpp-device 0003:046D:406F.0015: HID++ 4.5 device connected. [84816.124592] scsi 0:0:0:0: Direct-Access Kingston DT Rubber 3.0 PMAP PQ: 0 ANSI: 6 [84816.125256] sd 0:0:0:0: Attached scsi generic sg0 type 0 [84816.125755] sd 0:0:0:0: [sda] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [84816.126756] sd 0:0:0:0: [sda] Write Protect is off [84816.126764] sd 0:0:0:0: [sda] Mode Sense: 2b 80 00 08 [84816.127688] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [84816.229606] sda: sda1 [84816.231487] sd 0:0:0:0: [sda] Write Protect is on [84816.231489] sd 0:0:0:0: [sda] Mode Sense: 2b 80 80 08 [84816.232456] sd 0:0:0:0: [sda] Attached SCSI removable disk [84818.596900] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [84818.596909] EXT4-fs (sda1): write access unavailable, cannot proceed (try mounting with noload) [85048.414609] usb 1-2.4: USB disconnect, device number 15 [85050.410473] usb 1-2.4: new high-speed USB device number 16 using xhci_hcd [85050.631984] usb 1-2.4: New USB device found, idVendor=0951, idProduct=168e, bcdDevice= 1.00 [85050.632003] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [85050.632013] usb 1-2.4: Product: DT Rubber 3.0 [85050.632019] usb 1-2.4: Manufacturer: Kingston [85050.632024] usb 1-2.4: SerialNumber: ... [85050.633716] usb-storage 1-2.4:1.0: USB Mass Storage device detected [85050.634118] scsi host0: usb-storage 1-2.4:1.0 [85051.644449] scsi 0:0:0:0: Direct-Access Kingston DT Rubber 3.0 PMAP PQ: 0 ANSI: 6 [85051.645291] sd 0:0:0:0: Attached scsi generic sg0 type 0 [85051.645597] sd 0:0:0:0: [sda] 30703616 512-byte logical blocks: (15.7 GB/14.6 GiB) [85051.646552] sd 0:0:0:0: [sda] Write Protect is off [85051.646564] sd 0:0:0:0: [sda] Mode Sense: 2b 80 00 08 [85051.647564] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [85051.752172] sda: sda1 [85051.754279] sd 0:0:0:0: [sda] Write Protect is on [85051.754281] sd 0:0:0:0: [sda] Mode Sense: 2b 80 80 08 [85051.755416] sd 0:0:0:0: [sda] Attached SCSI removable disk [85185.886779] usb 1-2.4: USB disconnect, device number 16 [86880.564910] usb 1-2.4: new high-speed USB device number 17 using xhci_hcd [86880.659484] usb 1-2.4: New USB device found, idVendor=054c, idProduct=0243, bcdDevice= 1.00 [86880.659495] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [86880.659500] usb 1-2.4: Product: Storage Media [86880.659503] usb 1-2.4: Manufacturer: Sony [86880.659506] usb 1-2.4: SerialNumber: ... [86880.661097] usb-storage 1-2.4:1.0: USB Mass Storage device detected [86880.664009] scsi host0: usb-storage 1-2.4:1.0 [86881.670535] scsi 0:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS [86881.671486] sd 0:0:0:0: Attached scsi generic sg0 type 0 [86881.672829] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [86881.673329] sd 0:0:0:0: [sda] Write Protect is off [86881.673338] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [86881.673827] sd 0:0:0:0: [sda] No Caching mode page found [86881.673834] sd 0:0:0:0: [sda] Assuming drive cache: write through [86881.702822] sda: sda1 [86881.705959] sd 0:0:0:0: [sda] Attached SCSI removable disk [86884.396670] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [87780.107542] sda: sda1 sda2 [87787.108243] usb 1-2.4: USB disconnect, device number 17 [89654.330248] usb 1-2.4: new high-speed USB device number 18 using xhci_hcd [89654.427306] usb 1-2.4: New USB device found, idVendor=054c, idProduct=0243, bcdDevice= 1.00 [89654.427318] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [89654.427324] usb 1-2.4: Product: Storage Media [89654.427328] usb 1-2.4: Manufacturer: Sony [89654.427332] usb 1-2.4: SerialNumber: ... [89654.429085] usb-storage 1-2.4:1.0: USB Mass Storage device detected [89654.429531] scsi host0: usb-storage 1-2.4:1.0 [89655.454687] scsi 0:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS [89655.454978] sd 0:0:0:0: Attached scsi generic sg0 type 0 [89655.456037] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [89655.456480] sd 0:0:0:0: [sda] Write Protect is off [89655.456482] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [89655.456917] sd 0:0:0:0: [sda] No Caching mode page found [89655.456920] sd 0:0:0:0: [sda] Assuming drive cache: write through [89655.474872] sda: sda1 sda2 [89655.477015] sd 0:0:0:0: [sda] Attached SCSI removable disk [90579.835725] sda: sda1 sda2 [90637.929807] usb 1-2.4: USB disconnect, device number 18 [91176.678948] EXT4-fs (dm-0): error count since last fsck: 10755 [91176.679027] EXT4-fs (dm-0): initial error at time 1573657501: ext4_validate_block_bitmap:376 [91176.679045] EXT4-fs (dm-0): last error at time 1624258380: ext4_validate_inode_bitmap:105 [91951.161525] usb 1-2.4: new high-speed USB device number 19 using xhci_hcd [91951.256298] usb 1-2.4: New USB device found, idVendor=054c, idProduct=0243, bcdDevice= 1.00 [91951.256317] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [91951.256326] usb 1-2.4: Product: Storage Media [91951.256332] usb 1-2.4: Manufacturer: Sony [91951.256338] usb 1-2.4: SerialNumber: ... [91951.261536] usb-storage 1-2.4:1.0: USB Mass Storage device detected [91951.262145] scsi host0: usb-storage 1-2.4:1.0 [91952.279746] scsi 0:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS [91952.280122] sd 0:0:0:0: Attached scsi generic sg0 type 0 [91952.281456] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [91952.281966] sd 0:0:0:0: [sda] Write Protect is off [91952.281971] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [91952.282412] sd 0:0:0:0: [sda] No Caching mode page found [91952.282415] sd 0:0:0:0: [sda] Assuming drive cache: write through [91952.303462] sda: sda1 sda2 [91952.305729] sd 0:0:0:0: [sda] Attached SCSI removable disk [93345.912460] sda: sda1 sda2 [93356.911416] usb 1-2.4: USB disconnect, device number 19 [96189.508104] usb 1-2.4: new high-speed USB device number 20 using xhci_hcd [96189.602907] usb 1-2.4: New USB device found, idVendor=054c, idProduct=0243, bcdDevice= 1.00 [96189.602926] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [96189.602935] usb 1-2.4: Product: Storage Media [96189.602941] usb 1-2.4: Manufacturer: Sony [96189.602947] usb 1-2.4: SerialNumber: ... [96189.605094] usb-storage 1-2.4:1.0: USB Mass Storage device detected [96189.605686] scsi host0: usb-storage 1-2.4:1.0 [96190.627927] scsi 0:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 0 CCS [96190.628311] sd 0:0:0:0: Attached scsi generic sg0 type 0 [96190.629614] sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [96190.630125] sd 0:0:0:0: [sda] Write Protect is off [96190.630128] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [96190.630592] sd 0:0:0:0: [sda] No Caching mode page found [96190.630596] sd 0:0:0:0: [sda] Assuming drive cache: write through [96190.666149] sda: sda1 sda2 sda3 [96190.668400] sd 0:0:0:0: [sda] Attached SCSI removable disk [96813.301559] sda: sda1 sda2 [96816.502027] usb 1-2.4: USB disconnect, device number 20 [182053.215232] EXT4-fs (dm-0): error count since last fsck: 10755 [182053.215277] EXT4-fs (dm-0): initial error at time 1573657501: ext4_validate_block_bitmap:376 [182053.215294] EXT4-fs (dm-0): last error at time 1624258380: ext4_validate_inode_bitmap:105 [184203.400988] IPv6: ADDRCONF(NETDEV_CHANGE): vpn0: link becomes ready [198178.162877] retire_capture_urb: 2 callbacks suppressed [198183.492908] retire_capture_urb: 2 callbacks suppressed [198540.382499] retire_capture_urb: 1 callbacks suppressed [200518.175398] PM: hibernation: hibernation entry [200518.183110] Filesystems sync: 0.002 seconds [200518.183119] Freezing user space processes ... (elapsed 0.003 seconds) done. [200518.186215] OOM killer disabled. [200518.186502] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff] [200518.186506] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff] [200518.186509] PM: hibernation: Marking nosave pages: [mem 0x927fc000-0x92844fff] [200518.186512] PM: hibernation: Marking nosave pages: [mem 0x966ab000-0x97c0efff] [200518.186594] PM: hibernation: Marking nosave pages: [mem 0x97c10000-0xffffffff] [200518.188102] PM: hibernation: Basic memory bitmaps created [200518.188104] PM: hibernation: Preallocating image memory [200525.493543] PM: hibernation: Allocated 2845540 pages for snapshot [200525.493547] PM: hibernation: Allocated 11382160 kbytes in 7.30 seconds (1559.20 MB/s) [200525.493549] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [200525.495370] printk: Suspending console(s) (use no_console_suspend to debug) [200525.707173] ACPI: EC: interrupt blocked [200525.725875] Disabling non-boot CPUs ... [200525.727207] smpboot: CPU 1 is now offline [200525.729014] smpboot: CPU 2 is now offline [200525.731024] smpboot: CPU 3 is now offline [200525.732813] smpboot: CPU 4 is now offline [200525.734494] smpboot: CPU 5 is now offline [200525.736179] smpboot: CPU 6 is now offline [200525.737894] smpboot: CPU 7 is now offline [200525.740825] PM: hibernation: Creating image: [200526.062300] PM: hibernation: Need to copy 2838009 pages [200526.062303] PM: hibernation: Normal pages needed: 2838009 + 1024, available pages: 5500383 [200527.773736] PM: hibernation: Image created (2838009 pages copied) [200525.741871] Enabling non-boot CPUs ... [200525.742040] x86: Booting SMP configuration: [200525.742041] smpboot: Booting Node 0 Processor 1 APIC 0x2 [200525.742658] CPU1 is up [200525.742806] smpboot: Booting Node 0 Processor 2 APIC 0x4 [200525.743445] CPU2 is up [200525.743580] smpboot: Booting Node 0 Processor 3 APIC 0x6 [200525.744211] CPU3 is up [200525.744353] smpboot: Booting Node 0 Processor 4 APIC 0x1 [200525.745052] CPU4 is up [200525.745203] smpboot: Booting Node 0 Processor 5 APIC 0x3 [200525.745826] CPU5 is up [200525.745972] smpboot: Booting Node 0 Processor 6 APIC 0x5 [200525.746605] CPU6 is up [200525.746745] smpboot: Booting Node 0 Processor 7 APIC 0x7 [200525.747382] CPU7 is up [200525.749816] ACPI: EC: interrupt unblocked [200525.802221] nvme nvme0: 8/0/0 default/read/poll queues [200525.811500] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [200525.811503] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [200525.962051] PM: Using 3 thread(s) for compression [200525.962057] PM: Compressing and saving image data (2843552 pages)... [200525.962073] PM: Image saving progress: 0% [200525.962368] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [200526.827832] PM: Image saving progress: 10% [200527.730700] PM: Image saving progress: 20% [200528.628509] PM: Image saving progress: 30% [200529.568519] PM: Image saving progress: 40% [200531.530363] PM: hibernation: Wrote 11374208 kbytes in 5.56 seconds (2045.72 MB/s) [200531.803283] PM: hibernation: Basic memory bitmaps freed [200531.803286] OOM killer enabled. [200531.803287] Restarting tasks ... done. [200531.812404] thermal thermal_zone13: failed to read out thermal zone (-61) [200531.816612] PM: hibernation: hibernation exit [200532.744388] i2c_hid i2c-SYNA3092:00: supply vdd not found, using dummy regulator [200532.744419] i2c_hid i2c-SYNA3092:00: supply vddl not found, using dummy regulator [200532.807079] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [200532.902850] input: SYNA3092:00 06CB:CD78 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.0016/input/input87 [200532.902934] input: SYNA3092:00 06CB:CD78 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.0016/input/input88 [200532.903021] hid-multitouch 0018:06CB:CD78.0016: input,hidraw6: I2C HID v1.00 Mouse [SYNA3092:00 06CB:CD78] on i2c-SYNA3092:00 [200534.707008] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [200534.707019] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [200534.707145] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [210064.338195] PM: hibernation: hibernation entry [210064.347459] Filesystems sync: 0.003 seconds [210064.347467] Freezing user space processes ... (elapsed 0.003 seconds) done. [210064.351092] OOM killer disabled. [210064.351280] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff] [210064.351283] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff] [210064.351286] PM: hibernation: Marking nosave pages: [mem 0x927fc000-0x92844fff] [210064.351288] PM: hibernation: Marking nosave pages: [mem 0x966ab000-0x97c0efff] [210064.351352] PM: hibernation: Marking nosave pages: [mem 0x97c10000-0xffffffff] [210064.352467] PM: hibernation: Basic memory bitmaps created [210064.352467] PM: hibernation: Preallocating image memory [210076.597813] PM: hibernation: Allocated 3292811 pages for snapshot [210076.597816] PM: hibernation: Allocated 13171244 kbytes in 12.24 seconds (1076.08 MB/s) [210076.597818] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [210076.599642] printk: Suspending console(s) (use no_console_suspend to debug) [210076.826539] ACPI: EC: interrupt blocked [210076.836786] Disabling non-boot CPUs ... [210076.838045] smpboot: CPU 1 is now offline [210076.839713] smpboot: CPU 2 is now offline [210076.841437] smpboot: CPU 3 is now offline [210076.843416] smpboot: CPU 4 is now offline [210076.845014] smpboot: CPU 5 is now offline [210076.846570] smpboot: CPU 6 is now offline [210076.848189] smpboot: CPU 7 is now offline [210076.851012] PM: hibernation: Creating image: [210077.146571] PM: hibernation: Need to copy 3288867 pages [210077.146573] PM: hibernation: Normal pages needed: 3288867 + 1024, available pages: 5049527 [210079.062847] PM: hibernation: Image created (3288867 pages copied) [210076.852038] Enabling non-boot CPUs ... [210076.852222] x86: Booting SMP configuration: [210076.852223] smpboot: Booting Node 0 Processor 1 APIC 0x2 [210076.852850] CPU1 is up [210076.853008] smpboot: Booting Node 0 Processor 2 APIC 0x4 [210076.853645] CPU2 is up [210076.853790] smpboot: Booting Node 0 Processor 3 APIC 0x6 [210076.854443] CPU3 is up [210076.854589] smpboot: Booting Node 0 Processor 4 APIC 0x1 [210076.855285] CPU4 is up [210076.855432] smpboot: Booting Node 0 Processor 5 APIC 0x3 [210076.856047] CPU5 is up [210076.856195] smpboot: Booting Node 0 Processor 6 APIC 0x5 [210076.856805] CPU6 is up [210076.856945] smpboot: Booting Node 0 Processor 7 APIC 0x7 [210076.857566] CPU7 is up [210076.860074] ACPI: EC: interrupt unblocked [210076.909380] nvme nvme0: 8/0/0 default/read/poll queues [210076.920841] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [210076.920844] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [210077.070155] PM: Cannot get swap writer [210077.084592] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [210077.376618] PM: hibernation: Basic memory bitmaps freed [210077.376621] OOM killer enabled. [210077.376621] Restarting tasks ... done. [210077.390911] thermal thermal_zone13: failed to read out thermal zone (-61) [210077.398069] PM: hibernation: hibernation exit [210078.255631] i2c_hid i2c-SYNA3092:00: supply vdd not found, using dummy regulator [210078.255657] i2c_hid i2c-SYNA3092:00: supply vddl not found, using dummy regulator [210078.298876] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [210078.422251] input: SYNA3092:00 06CB:CD78 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.0017/input/input90 [210078.422339] input: SYNA3092:00 06CB:CD78 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-SYNA3092:00/0018:06CB:CD78.0017/input/input91 [210078.422571] hid-multitouch 0018:06CB:CD78.0017: input,hidraw6: I2C HID v1.00 Mouse [SYNA3092:00 06CB:CD78] on i2c-SYNA3092:00 [210080.050818] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [210080.050824] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [210080.050882] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [270079.768674] st: Version 20160209, fixed bufsize 32768, s/g segs 256