[ 0.000000] microcode: microcode updated early to revision 0x5d, date = 2010-10-02 [ 0.000000] Linux version 4.9.41-nrj-desktop-1rosa-x86_64 (XXX@XXX) (gcc version 4.9.4 20160726 (ROSA) (Linaro GCC 4.9-2017.01) ) #1 SMP PREEMPT Fri Aug 11 11:00:08 UTC 2017 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.41-nrj-desktop-1rosa-x86_64 root=UUID=HASH_832-1989-B26F-8FC4-446B71F9373B ro splash=silent logo.nologo quiet resume=UUID=HASH_832-1989-B26F-8FC4-446B71F9373B resume_offset=34816 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffdffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: ASUSTek Computer INC. P5PL2-E/P5PL2-E, BIOS 0701 01/30/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x43fce000, 0x43fcefff] PGTABLE [ 0.000000] BRK [0x43fcf000, 0x43fcffff] PGTABLE [ 0.000000] BRK [0x43fd0000, 0x43fd0fff] PGTABLE [ 0.000000] BRK [0x43fd1000, 0x43fd1fff] PGTABLE [ 0.000000] BRK [0x43fd2000, 0x43fd2fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x356ae000-0x36b4efff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FAD20 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x000000007FF90000 000038 (v01 A_M_I_ OEMRSDT 01000730 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000007FF90200 000081 (v01 A_M_I_ OEMFACP 01000730 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000007FF90410 00859F (v01 A0665 A0665000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000007FF9E000 000040 [ 0.000000] ACPI: APIC 0x000000007FF90390 000080 (v01 A_M_I_ OEMAPIC 01000730 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000007FF9E040 000066 (v01 A_M_I_ AMI_OEM 01000730 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000007FF989B0 000038 (v01 A_M_I_ OEMHPET 01000730 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000007FF989F0 00003C (v01 A_M_I_ OEMMCFG 01000730 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7ff8c000-0x7ff8ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ff8ffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff8ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff8ffff] [ 0.000000] On node 0 totalpages: 524078 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8127 pages used for memmap [ 0.000000] DMA32 zone: 520080 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xffb7ffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff88007fc00000 s108376 r8192 d30888 u524288 [ 0.000000] pcpu-alloc: s108376 r8192 d30888 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515866 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.41-nrj-desktop-1rosa-x86_64 root=UUID=HASH_832-1989-B26F-8FC4-446B71F9373B ro splash=silent logo.nologo quiet resume=UUID=HASH_832-1989-B26F-8FC4-446B71F9373B resume_offset=34816 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2025476K/2096312K available (8085K kernel code, 1444K rwdata, 3704K rodata, 1448K init, 956K bss, 70836K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1605.721 MHz processor [ 0.001016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3211.44 BogoMIPS (lpj=1605721) [ 0.001020] pid_max: default: 32768 minimum: 301 [ 0.001031] ACPI: Core revision 20160831 [ 0.007624] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.007665] Security Framework initialized [ 0.007667] SELinux: Disabled at boot. [ 0.007888] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009324] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.010144] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.010150] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.010678] CPU: Physical Processor ID: 0 [ 0.010681] CPU: Processor Core ID: 0 [ 0.010683] mce: CPU supports 6 MCE banks [ 0.010693] CPU0: Thermal monitoring enabled (TM2) [ 0.010700] process: using mwait in idle threads [ 0.010706] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.010707] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.011225] Freeing SMP alternatives memory: 32K (ffffffffbced5000 - ffffffffbcedd000) [ 0.014010] ftrace: allocating 31086 entries in 122 pages [ 0.026172] smpboot: Max logical packages: 2 [ 0.026560] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.037000] smpboot: CPU0: Genuine Intel(R) CPU 2140 @ 1.60GHz (family: 0x6, model: 0xf, stepping: 0x2) [ 0.037000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.037000] core: PEBS disabled due to CPU errata [ 0.037000] ... version: 2 [ 0.037000] ... bit width: 40 [ 0.037000] ... generic registers: 2 [ 0.037000] ... value mask: 000000ffffffffff [ 0.037000] ... max period: 000000007fffffff [ 0.037000] ... fixed-purpose events: 3 [ 0.037000] ... event mask: 0000000700000003 [ 0.054032] x86: Booting SMP configuration: [ 0.054036] .... node #0, CPUs: #1 [ 0.115035] x86: Booted up 1 node, 2 CPUs [ 0.115035] smpboot: Total of 2 processors activated (6422.75 BogoMIPS) [ 0.116255] devtmpfs: initialized [ 0.116255] x86/mm: Memory block size: 128MB [ 0.122062] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffdffff] (270336 bytes) [ 0.122156] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.122167] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.122237] xor: measuring software checksum speed [ 0.131970] prefetch64-sse: 8988.000 MB/sec [ 0.141969] generic_sse: 7536.000 MB/sec [ 0.141971] xor: using function: prefetch64-sse (8988.000 MB/sec) [ 0.141976] pinctrl core: initialized pinctrl subsystem [ 0.142052] RTC time: 19:53:29, date: 12/07/17 [ 0.142202] NET: Registered protocol family 16 [ 0.146007] cpuidle: using governor ladder [ 0.150005] cpuidle: using governor menu [ 0.150087] ACPI: bus type PCI registered [ 0.150089] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.150221] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.150223] PCI: not using MMCONFIG [ 0.150225] PCI: Using configuration type 1 for base access [ 0.150285] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.150285] mtrr: probably your BIOS does not setup all CPUs. [ 0.150285] mtrr: corrected configuration. [ 0.156084] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.173005] raid6: sse2x1 gen() 2621 MB/s [ 0.190010] raid6: sse2x1 xor() 2779 MB/s [ 0.207018] raid6: sse2x2 gen() 3105 MB/s [ 0.224009] raid6: sse2x2 xor() 3404 MB/s [ 0.241008] raid6: sse2x4 gen() 4839 MB/s [ 0.258009] raid6: sse2x4 xor() 3931 MB/s [ 0.258011] raid6: using algorithm sse2x4 gen() 4839 MB/s [ 0.258012] raid6: .... xor() 3931 MB/s, rmw enabled [ 0.258014] raid6: using ssse3x2 recovery algorithm [ 0.258129] ACPI: Added _OSI(Module Device) [ 0.258131] ACPI: Added _OSI(Processor Device) [ 0.258132] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.258134] ACPI: Added _OSI(Processor Aggregator Device) [ 0.258377] ACPI: Executed 1 blocks of module-level executable AML code [ 0.265362] ACPI: Dynamic OEM Table Load: [ 0.265371] ACPI: SSDT 0xFFFF88007CA2F400 0001C6 (v01 AMI CPU1PM 00000001 INTL 20051117) [ 0.265705] ACPI: Dynamic OEM Table Load: [ 0.265711] ACPI: SSDT 0xFFFF88007CA2F600 00013A (v01 AMI CPU2PM 00000001 INTL 20051117) [ 0.266397] ACPI: Interpreter enabled [ 0.266429] ACPI: (supports S0 S1 S3 S4 S5) [ 0.266431] ACPI: Using IOAPIC for interrupt routing [ 0.266481] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.268320] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.268337] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.276218] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.276225] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.276233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.276245] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.276523] PCI host bridge to bus 0000:00 [ 0.276526] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.276529] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.276531] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.276533] pci_bus 0000:00: root bus resource [mem 0x80010000-0xffffffff window] [ 0.276536] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.276549] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000 [ 0.276708] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400 [ 0.276766] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.276831] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.276934] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.276954] pci 0000:00:1b.0: reg 0x10: [mem 0xe3df8000-0xe3dfbfff 64bit] [ 0.277047] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.277172] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.277257] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.277328] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.277399] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.277483] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.277551] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.277619] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.277665] pci 0000:00:1d.0: reg 0x20: [io 0x8000-0x801f] [ 0.277751] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.277816] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.277862] pci 0000:00:1d.1: reg 0x20: [io 0x8400-0x841f] [ 0.277948] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.278020] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.278067] pci 0000:00:1d.2: reg 0x20: [io 0x8800-0x881f] [ 0.278153] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.278222] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.278268] pci 0000:00:1d.3: reg 0x20: [io 0x9000-0x901f] [ 0.278356] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.278428] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.278447] pci 0000:00:1d.7: reg 0x10: [mem 0xe3dffc00-0xe3dfffff] [ 0.278539] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.278601] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.278668] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.278781] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.278850] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.278940] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 0.278946] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.278951] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) [ 0.279099] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.279114] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.279125] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.279135] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.279146] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.279156] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf] [ 0.279178] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.279180] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.279183] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.279185] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.279305] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.279321] pci 0000:00:1f.2: reg 0x10: [io 0xa800-0xa807] [ 0.279330] pci 0000:00:1f.2: reg 0x14: [io 0xa400-0xa403] [ 0.279339] pci 0000:00:1f.2: reg 0x18: [io 0xa000-0xa007] [ 0.279349] pci 0000:00:1f.2: reg 0x1c: [io 0x9800-0x9803] [ 0.279358] pci 0000:00:1f.2: reg 0x20: [io 0x9400-0x940f] [ 0.279402] pci 0000:00:1f.2: PME# supported from D3hot [ 0.279523] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.279579] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.279775] pci 0000:04:00.0: [10de:1040] type 00 class 0x030000 [ 0.279790] pci 0000:04:00.0: reg 0x10: [mem 0xe4000000-0xe4ffffff] [ 0.279803] pci 0000:04:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref] [ 0.279816] pci 0000:04:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff 64bit pref] [ 0.279825] pci 0000:04:00.0: reg 0x24: [io 0xe800-0xe87f] [ 0.279834] pci 0000:04:00.0: reg 0x30: [mem 0xe5f00000-0xe5f7ffff pref] [ 0.279958] pci 0000:04:00.1: [10de:0e08] type 00 class 0x040300 [ 0.279972] pci 0000:04:00.1: reg 0x10: [mem 0xe5ffc000-0xe5ffffff] [ 0.283029] pci 0000:00:01.0: PCI bridge to [bus 04] [ 0.283034] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.283039] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff] [ 0.283046] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bit pref] [ 0.283126] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.283132] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.283243] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.283267] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff] [ 0.283301] pci 0000:02:00.0: reg 0x18: [mem 0xe3fff000-0xe3ffffff 64bit] [ 0.283341] pci 0000:02:00.0: reg 0x30: [mem 0xe3fe0000-0xe3feffff pref] [ 0.283444] pci 0000:02:00.0: supports D1 D2 [ 0.283446] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.283544] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.283555] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.283559] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.283564] pci 0000:00:1c.3: bridge window [mem 0xe3f00000-0xe3ffffff] [ 0.283627] pci 0000:01:01.0: [1102:0007] type 00 class 0x040100 [ 0.283645] pci 0000:01:01.0: reg 0x10: [io 0xb800-0xb81f] [ 0.283734] pci 0000:01:01.0: supports D1 D2 [ 0.283798] pci 0000:01:02.0: [1131:7130] type 00 class 0x048000 [ 0.283817] pci 0000:01:02.0: reg 0x10: [mem 0xe3effc00-0xe3efffff] [ 0.283906] pci 0000:01:02.0: supports D1 D2 [ 0.284000] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.284000] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.284004] pci 0000:00:1e.0: bridge window [mem 0xe3e00000-0xe3efffff] [ 0.284011] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.284014] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.284016] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.284019] pci 0000:00:1e.0: bridge window [mem 0x80010000-0xffffffff window] (subtractive decode) [ 0.285348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.285433] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.285513] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.285593] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.285674] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.285753] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.285833] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.285912] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.286198] vgaarb: setting as boot device: PCI:0000:04:00.0 [ 0.286198] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.286198] vgaarb: loaded [ 0.286198] vgaarb: bridge control possible 0000:04:00.0 [ 0.286361] SCSI subsystem initialized [ 0.286429] libata version 3.00 loaded. [ 0.286429] ACPI: bus type USB registered [ 0.286429] usbcore: registered new interface driver usbfs [ 0.286429] usbcore: registered new interface driver hub [ 0.286429] usbcore: registered new device driver usb [ 0.286429] PCI: Using ACPI for IRQ routing [ 0.288620] PCI: pci_cache_line_size set to 64 bytes [ 0.288687] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.288689] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff] [ 0.288871] NetLabel: Initializing [ 0.288873] NetLabel: domain hash size = 128 [ 0.288874] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.288899] NetLabel: unlabeled traffic allowed by default [ 0.289037] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.289041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.289047] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.292037] clocksource: Switched to clocksource hpet [ 0.306845] VFS: Disk quotas dquot_6.6.0 [ 0.306888] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.307086] pnp: PnP ACPI init [ 0.307229] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved [ 0.307236] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.307310] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.307680] pnp 00:02: [dma 2] [ 0.307758] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.308186] pnp 00:03: [dma 3] [ 0.308351] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.308454] system 00:04: [io 0x0290-0x0297] has been reserved [ 0.308459] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.308686] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.308690] system 00:05: [io 0x0800-0x087f] has been reserved [ 0.308693] system 00:05: [io 0x0480-0x04bf] has been reserved [ 0.308695] system 00:05: [io 0x0900-0x091f] has been reserved [ 0.308699] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.308702] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.308705] system 00:05: [mem 0xffb00000-0xffbfffff] could not be reserved [ 0.308708] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved [ 0.308713] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.308964] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.308967] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.308972] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.309536] pnp 00:07: [dma 0 disabled] [ 0.309636] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.309762] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.309767] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.309988] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.309992] system 00:09: [mem 0x000c0000-0x000dffff] could not be reserved [ 0.309994] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.309997] system 00:09: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.310013] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.310190] pnp: PnP ACPI: found 10 devices [ 0.318045] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.318074] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.318077] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000 [ 0.318105] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.318108] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.318111] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.318114] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.318121] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff] [ 0.318126] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref] [ 0.318132] pci 0000:00:01.0: PCI bridge to [bus 04] [ 0.318135] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.318140] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff] [ 0.318143] pci 0000:00:01.0: bridge window [mem 0xe6000000-0xefffffff 64bit pref] [ 0.318149] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.318152] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.318157] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff] [ 0.318162] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x804fffff 64bit pref] [ 0.318169] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.318172] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.318177] pci 0000:00:1c.3: bridge window [mem 0xe3f00000-0xe3ffffff] [ 0.318187] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.318190] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.318196] pci 0000:00:1e.0: bridge window [mem 0xe3e00000-0xe3efffff] [ 0.318206] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.318208] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.318211] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.318213] pci_bus 0000:00: resource 7 [mem 0x80010000-0xffffffff window] [ 0.318216] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 0.318218] pci_bus 0000:04: resource 1 [mem 0xe4000000-0xe5ffffff] [ 0.318220] pci_bus 0000:04: resource 2 [mem 0xe6000000-0xefffffff 64bit pref] [ 0.318223] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.318225] pci_bus 0000:03: resource 1 [mem 0x80100000-0x802fffff] [ 0.318227] pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref] [ 0.318230] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.318232] pci_bus 0000:02: resource 1 [mem 0xe3f00000-0xe3ffffff] [ 0.318235] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.318237] pci_bus 0000:01: resource 1 [mem 0xe3e00000-0xe3efffff] [ 0.318239] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window] [ 0.318242] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window] [ 0.318244] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.318246] pci_bus 0000:01: resource 7 [mem 0x80010000-0xffffffff window] [ 0.318354] NET: Registered protocol family 2 [ 0.318624] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.318701] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.318812] TCP: Hash tables configured (established 16384 bind 16384) [ 0.318869] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.318885] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.318973] NET: Registered protocol family 1 [ 0.319970] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.319991] PCI: CLS 16 bytes, default 64 [ 0.320117] Trying to unpack rootfs image as initramfs... [ 0.863971] Freeing initrd memory: 21124K (ffff8800356ae000 - ffff880036b4f000) [ 0.865476] workingset: timestamp_bits=40 max_order=19 bucket_order=0 [ 0.869033] zbud: loaded [ 0.871921] Key type asymmetric registered [ 0.872025] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.872082] io scheduler noop registered [ 0.872084] io scheduler deadline registered [ 0.872101] io scheduler cfq registered [ 0.872162] io scheduler bfq registered (default) [ 0.872164] BFQ I/O-scheduler: v8r7 (with cgroups support) [ 0.872987] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.872997] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.873099] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.873100] vesafb: scrolling: redraw [ 0.873103] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.873122] vesafb: framebuffer at 0xe7000000, mapped to 0xffffc90000800000, using 3072k, total 3072k [ 0.912962] Console: switching to colour frame buffer device 128x48 [ 0.952566] fb0: VESA VGA frame buffer device [ 0.952596] intel_idle: does not run on family 6 model 15 [ 0.952721] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.952725] ACPI: Power Button [PWRB] [ 0.952795] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.952798] ACPI: Power Button [PWRF] [ 0.953206] GHES: HEST is not enabled! [ 0.953347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.973957] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.974579] Linux agpgart interface v0.103 [ 0.979422] brd: module loaded [ 0.979808] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.982482] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.982547] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.982712] mousedev: PS/2 mouse device common for all mice [ 0.982927] rtc_cmos 00:01: RTC can wake from S4 [ 0.983116] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.983148] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.983242] device-mapper: uevent: version 1.0.3 [ 0.983358] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: XXX@XXX [ 0.983389] ledtrig-cpu: registered to indicate activity on CPUs [ 0.983555] Key type dns_resolver registered [ 0.983557] mpls_gso: MPLS GSO support [ 0.983812] microcode: sig=0x6f2, pf=0x1, revision=0x5d [ 0.983873] microcode: Microcode Update Driver: v2.01 <XXX@XXX>, Peter Oruba [ 0.984099] registered taskstats version 1 [ 0.984140] zswap: loaded using pool lzo/zbud [ 0.984865] Btrfs loaded, crc32c=crc32c-generic [ 0.992435] Key type encrypted registered [ 0.992441] ima: No TPM chip found, activating TPM-bypass! [ 0.992821] Magic number: 13:916:899 [ 0.992950] rtc_cmos 00:01: setting system clock to 2017-12-07 19:53:30 UTC (1512676410) [ 0.992953] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.992954] EDD information not available. [ 0.993045] PM: Checking hibernation image partition UUID=HASH_832-1989-B26F-8FC4-446B71F9373B [ 1.004296] PM: Hibernation image not present or could not be loaded. [ 1.006835] Freeing unused kernel memory: 1448K (ffffffffbcd6b000 - ffffffffbced5000) [ 1.006840] Write protecting the kernel read-only data: 12288k [ 1.007199] Freeing unused kernel memory: 92K (ffff8800437e9000 - ffff880043800000) [ 1.009143] Freeing unused kernel memory: 392K (ffff880043b9e000 - ffff880043c00000) [ 1.016816] systemd[1]: Inserted module 'autofs4' [ 1.052601] NET: Registered protocol family 10 [ 1.053166] systemd[1]: Inserted module 'ipv6' [ 1.053951] random: systemd: uninitialized urandom read (16 bytes read) [ 1.054450] random: systemd: uninitialized urandom read (16 bytes read) [ 1.054471] random: systemd: uninitialized urandom read (16 bytes read) [ 1.056471] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.056732] systemd[1]: Detected architecture x86-64. [ 1.056735] systemd[1]: Running in initial RAM disk. [ 1.056778] systemd[1]: Set hostname to ... [ 1.113460] random: systemd: uninitialized urandom read (16 bytes read) [ 1.113497] random: systemd: uninitialized urandom read (16 bytes read) [ 1.113552] random: systemd: uninitialized urandom read (16 bytes read) [ 1.113650] random: systemd: uninitialized urandom read (16 bytes read) [ 1.114641] random: systemd: uninitialized urandom read (16 bytes read) [ 1.115054] random: systemd: uninitialized urandom read (16 bytes read) [ 1.115444] random: systemd: uninitialized urandom read (16 bytes read) [ 1.122896] systemd[1]: Created slice Root Slice. [ 1.122914] systemd[1]: Starting Root Slice. [ 1.122986] systemd[1]: Listening on udev Control Socket. [ 1.122999] systemd[1]: Starting udev Control Socket. [ 1.123044] systemd[1]: Reached target Timers. [ 1.123056] systemd[1]: Starting Timers. [ 1.650253] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.683629] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.684632] ehci-pci: EHCI PCI platform driver [ 1.684848] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.684859] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.684874] ehci-pci 0000:00:1d.7: debug port 1 [ 1.691632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.691653] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.701564] ehci-pci 0000:00:1d.7: cache line size of 16 is not supported [ 1.701603] ehci-pci 0000:00:1d.7: irq 20, io mem 0xe3dffc00 [ 1.701672] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc90000345000, XXX, XID 18000000 IRQ 27 [ 1.701676] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.708045] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.708163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.708167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.708169] usb usb1: Product: EHCI Host Controller [ 1.708172] usb usb1: Manufacturer: Linux 4.9.41-nrj-desktop-1rosa-x86_64 ehci_hcd [ 1.708174] usb usb1: SerialNumber: ... [ 1.708445] hub 1-0:1.0: USB hub found [ 1.708460] hub 1-0:1.0: 8 ports detected [ 1.711046] ata_piix 0000:00:1f.1: version 2.13 [ 1.714530] uhci_hcd: USB Universal Host Controller Interface driver [ 1.720150] scsi host0: ata_piix [ 1.726768] scsi host1: ata_piix [ 1.726890] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.726893] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.727367] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.734087] scsi host2: ata_piix [ 1.743176] scsi host3: ata_piix [ 1.743377] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 23 [ 1.743381] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 23 [ 1.744490] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.744507] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.744518] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.744544] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008000 [ 1.744652] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.744655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.744658] usb usb2: Product: UHCI Host Controller [ 1.744661] usb usb2: Manufacturer: Linux 4.9.41-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.744663] usb usb2: SerialNumber: ... [ 1.744955] hub 2-0:1.0: USB hub found [ 1.744979] hub 2-0:1.0: 2 ports detected [ 1.747493] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.747506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.747516] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.747558] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400 [ 1.747655] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.747658] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.747661] usb usb3: Product: UHCI Host Controller [ 1.747664] usb usb3: Manufacturer: Linux 4.9.41-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.747666] usb usb3: SerialNumber: ... [ 1.747879] hub 3-0:1.0: USB hub found [ 1.747891] hub 3-0:1.0: 2 ports detected [ 1.750249] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.750262] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.750272] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.750319] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008800 [ 1.750439] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.750443] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.750445] usb usb4: Product: UHCI Host Controller [ 1.750448] usb usb4: Manufacturer: Linux 4.9.41-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.750450] usb usb4: SerialNumber: ... [ 1.750680] hub 4-0:1.0: USB hub found [ 1.750694] hub 4-0:1.0: 2 ports detected [ 1.750999] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.753056] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.753071] uhci_hcd 0000:00:1d.3: detected 2 ports [ 1.753123] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009000 [ 1.753850] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.753854] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.753857] usb usb5: Product: UHCI Host Controller [ 1.753859] usb usb5: Manufacturer: Linux 4.9.41-nrj-desktop-1rosa-x86_64 uhci_hcd [ 1.753861] usb usb5: SerialNumber: ... [ 1.755801] hub 5-0:1.0: USB hub found [ 1.756238] hub 5-0:1.0: 2 ports detected [ 1.781338] [drm] Initialized [ 1.786355] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.817198] wmi: Mapper loaded [ 1.892028] tsc: Refined TSC clocksource calibration: 1605.681 MHz [ 1.892037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17251b95a55, max_idle_ns: 440795262765 ns [ 1.894055] ata1.00: ATAPI: ATAPI iHAP122 W, LL06, max UDMA/66 [ 1.898654] ata1.00: configured for UDMA/66 [ 1.921516] ata3.00: ATA-8: WDC WD5000AADS-56S9B1, 01.00A02, max UDMA/133 [ 1.921519] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.926537] ata3.00: configured for UDMA/133 [ 1.926880] checking generic (e7000000 300000) vs hw (e8000000 8000000) [ 1.926882] checking generic (e7000000 300000) vs hw (e6000000 2000000) [ 1.926884] fb: switching to nouveaufb from VESA VGA [ 1.956607] Console: switching to colour dummy device 80x25 [ 1.957867] nouveau 0000:04:00.0: NVIDIA GF119 (0d9000a1) [ 2.102518] nouveau 0000:04:00.0: bios: version 75.19.1b.00.00 [ 2.103937] nouveau 0000:04:00.0: fb: 2048 MiB DDR3 [ 2.162744] [TTM] Zone kernel: Available graphics memory: 1024282 kiB [ 2.162746] [TTM] Initializing pool allocator [ 2.162755] [TTM] Initializing DMA pool allocator [ 2.162779] nouveau 0000:04:00.0: DRM: VRAM: 2048 MiB [ 2.162782] nouveau 0000:04:00.0: DRM: GART: 1048576 MiB [ 2.162788] nouveau 0000:04:00.0: DRM: TMDS table version 2.0 [ 2.162791] nouveau 0000:04:00.0: DRM: DCB version 4.0 [ 2.162794] nouveau 0000:04:00.0: DRM: DCB outp 00: 02000300 00000000 [ 2.162798] nouveau 0000:04:00.0: DRM: DCB outp 01: 01000302 00020030 [ 2.162800] nouveau 0000:04:00.0: DRM: DCB outp 02: 02011362 00020010 [ 2.162803] nouveau 0000:04:00.0: DRM: DCB outp 03: 04022310 00000000 [ 2.162806] nouveau 0000:04:00.0: DRM: DCB conn 00: 00001030 [ 2.162808] nouveau 0000:04:00.0: DRM: DCB conn 01: 00002161 [ 2.162811] nouveau 0000:04:00.0: DRM: DCB conn 02: 00000200 [ 2.165633] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.165635] [drm] Driver supports precise vblank timestamp query. [ 2.211479] nouveau 0000:04:00.0: DRM: MM: using COPY0 for buffer copies [ 2.320609] nouveau 0000:04:00.0: DRM: allocated 1280x1024 fb: 0x60000, bo ffff88003677d400 [ 2.320742] fbcon: nouveaufb (fb0) is primary device [ 2.388018] usb 2-2: new low-speed USB device number 2 using uhci_hcd [ 2.454928] Console: switching to colour frame buffer device 160x64 [ 2.456473] nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device [ 2.460045] [drm] Initialized nouveau 1.3.1 20120801 for 0000:04:00.0 on minor 0 [ 2.477519] nvidia: loading out-of-tree module taints kernel. [ 2.477532] nvidia: module license 'NVIDIA' taints kernel. [ 2.477534] Disabling lock debugging due to kernel taint [ 2.505312] nvidia-nvlink: Nvlink Core is being initialized, major device number 247 [ 2.505340] NVRM: The NVIDIA probe routine was not called for 1 device(s). [ 2.505372] NVRM: This can occur when a driver such as: NVRM: nouveau, rivafb, nvidiafb or rivatv NVRM: was loaded and obtained ownership of the NVIDIA device(s). [ 2.505395] NVRM: Try unloading the conflicting kernel module (and/or NVRM: reconfigure your kernel without the conflicting NVRM: driver(s)), then try loading the NVIDIA kernel module NVRM: again. [ 2.505418] NVRM: No NVIDIA graphics adapter probed! [ 2.505428] nvidia-nvlink: Unregistered the Nvlink Core, major device number 247 [ 2.555955] nvidia-nvlink: Nvlink Core is being initialized, major device number 247 [ 2.555987] NVRM: The NVIDIA probe routine was not called for 1 device(s). [ 2.556068] NVRM: This can occur when a driver such as: NVRM: nouveau, rivafb, nvidiafb or rivatv NVRM: was loaded and obtained ownership of the NVIDIA device(s). [ 2.556095] NVRM: Try unloading the conflicting kernel module (and/or NVRM: reconfigure your kernel without the conflicting NVRM: driver(s)), then try loading the NVIDIA kernel module NVRM: again. [ 2.556126] NVRM: No NVIDIA graphics adapter probed! [ 2.556136] nvidia-nvlink: Unregistered the Nvlink Core, major device number 247 [ 2.656522] usb 2-2: New USB device found, idVendor=046e, idProduct=5503 [ 2.656525] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.656528] usb 2-2: Product: USB Multimedia Keyboard [ 2.656530] usb 2-2: Manufacturer: BTC [ 2.715758] hidraw: raw HID events driver (C) Jiri Kosina [ 2.880042] usb 3-2: new low-speed USB device number 2 using uhci_hcd [ 2.891225] usbcore: registered new interface driver usbhid [ 2.891228] usbhid: USB HID core driver [ 2.894419] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:046E:5503.0001/input/input5 [ 2.896113] clocksource: Switched to clocksource tsc [ 2.946443] hid-generic 0003:046E:5503.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input0 [ 2.976383] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:046E:5503.0002/input/input6 [ 3.033413] hid-generic 0003:046E:5503.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input1 [ 3.047047] usb 3-2: New USB device found, idVendor=04fc, idProduct=0538 [ 3.047051] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.047054] usb 3-2: Product: Defender 2.4GHz mouse [ 3.047057] usb 3-2: Manufacturer: MLK [ 3.089394] input: MLK Defender 2.4GHz mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:04FC:0538.0003/input/input7 [ 3.141613] hid-generic 0003:04FC:0538.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MLK Defender 2.4GHz mouse] on usb-0000:00:1d.1-2/input0 [ 3.656226] usb 4-2: new full-speed USB device number 2 using uhci_hcd [ 3.801244] random: fast init done [ 3.819251] usb 4-2: New USB device found, idVendor=09da, idProduct=054f [ 3.819255] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.819258] usb 4-2: Product: USB Device [ 3.819262] usb 4-2: Manufacturer: A4TECH [ 3.825545] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:09DA:054F.0004/input/input8 [ 3.877460] hid-generic 0003:09DA:054F.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.2-2/input0 [ 3.880986] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:09DA:054F.0005/input/input9 [ 3.881306] hid-generic 0003:09DA:054F.0005: input,hidraw4: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.2-2/input1 [ 23.019100] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 23.019119] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in Inquiry 12 00 00 00 60 00res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 23.019126] ata1.00: status: { DRDY } [ 28.065201] ata1: link is slow to respond, please be patient (ready=0) [ 33.058202] ata1: device not ready (errno=-16), forcing hardreset [ 33.058212] ata1: soft resetting link [ 33.223307] ata1.00: configured for UDMA/66 [ 34.678687] ata1: EH complete [ 34.678697] scsi 0:0:0:0: scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device [ 34.679226] scsi 0:0:0:0: CD-ROM ATAPI iHAP122 W LL06 PQ: 0 ANSI: 5 [ 34.691190] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AADS-5 0A02 PQ: 0 ANSI: 5 [ 34.705411] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 34.705487] sd 2:0:0:0: [sda] Write Protect is off [ 34.705491] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 34.705523] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 34.762088] sda: sda1 sda2 < sda5 sda6 > [ 34.762856] sd 2:0:0:0: [sda] Attached SCSI disk [ 35.212827] PM: Starting manual resume from disk [ 35.212832] PM: Hibernation image partition 8:6 present [ 35.212833] PM: Looking for hibernation image. [ 35.221230] PM: Image not found (code -22) [ 35.221233] PM: Hibernation image not present or could not be loaded. [ 35.222888] audit_printk_skb: 6 callbacks suppressed [ 66.027123] ata1.00: limiting speed to UDMA/44:PIO4 [ 66.027129] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 66.027147] ata1.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in Mode Sense(10) 5a 00 2a 00 00 00 00 00 80 00res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 66.027153] ata1.00: status: { DRDY } [ 71.072181] ata1: link is slow to respond, please be patient (ready=0) [ 76.064130] ata1: device not ready (errno=-16), forcing hardreset [ 76.064140] ata1: soft resetting link [ 76.223772] ata1.00: configured for UDMA/44 [ 76.599269] ata1: EH complete [ 76.599282] sr 0:0:0:0: [sr0] scsi-1 drive [ 76.599286] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 76.599617] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 83.757080] ata1.00: limiting speed to UDMA/33:PIO4 [ 83.757086] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 83.757104] ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in Xdread, Read track info 52 01 00 00 00 01 00 00 20 00res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 83.757110] ata1.00: status: { DRDY } [ 85.729453] random: crng init done [ 88.808141] ata1: link is slow to respond, please be patient (ready=0) [ 93.800044] ata1: device not ready (errno=-16), forcing hardreset [ 93.800054] ata1: soft resetting link [ 93.959303] ata1.00: configured for UDMA/33 [ 94.335172] ata1: EH complete [ 94.588869] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 95.068478] systemd-journald[138]: Received SIGTERM from PID 1 (systemd). [ 95.454269] systemd: 34 output lines suppressed due to ratelimiting [ 96.006475] ip_tables: (C) FCB9-52CA Netfilter Core Team [ 96.006518] systemd[1]: Inserted module 'ip_tables' [ 96.737190] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/mandi.service with real service [ 96.737340] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/checkflashboot.service with real service [ 96.737414] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/apmd.service with real service [ 96.737487] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/mandrake_firstime.service with real service [ 96.737531] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/pppoe.service with real service [ 96.737574] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/netconsole.service with real service [ 96.737618] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/wlan.service with real service [ 96.737663] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/preload.service with real service [ 96.737723] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/pptp.service with real service [ 96.737769] systemd-sysv-generator[499]: Overwriting existing symlink /run/systemd/generator.late/network.service with real service [ 96.738093] systemd-sysv-ge: 2 output lines suppressed due to ratelimiting [ 98.232235] EXT4-fs (sda6): re-mounted. Opts: acl [ 98.772496] Adding 3071996k swap on /swap. Priority:-1 extents:7 across:3244028k FS [ 99.017350] systemd-journald[502]: Received request to flush runtime journal from PID 1 [ 99.561992] audit_printk_skb: 135 callbacks suppressed [ 101.895501] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 102.212391] parport_pc 00:03: reported by Plug and Play ACPI [ 102.212492] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 102.258453] MPU-401 device not found or device busy [ 102.392638] snd_hda_intel 0000:04:00.1: Disabling MSI [ 102.392651] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client [ 102.624976] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input10 [ 102.625360] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input11 [ 102.700704] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\_SB.PCI0.SBRG.ASOC.SMRG) (20160831/utaddress-247) [ 102.700716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 102.723229] intel_rng: FWH not detected [ 102.827591] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPIO) (20160831/utaddress-247) [ 102.827601] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 102.827603] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPIO) (20160831/utaddress-247) [ 102.827609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 102.827611] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 102.838709] leds_ss4200: no LED devices found [ 102.861107] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1986A: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 102.861112] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 102.861115] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x1a/0x0/0x0/0x0/0x0) [ 102.861117] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 102.861119] snd_hda_codec_analog hdaudioC0D0: dig-out=0x25/0x0 [ 102.861121] snd_hda_codec_analog hdaudioC0D0: inputs: [ 102.861124] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x1d [ 102.861127] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x1f [ 102.861129] snd_hda_codec_analog hdaudioC0D0: Line=0x1c [ 102.861132] snd_hda_codec_analog hdaudioC0D0: CD=0x22 [ 102.881775] Uniform Multi-Platform E-IDE driver [ 102.882429] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 102.883491] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 102.883605] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 102.883706] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 102.883806] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 102.883904] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 103.134760] media: Linux media interface: v0.10 [ 103.333804] snd_ca0106 0000:01:01.0: Model 100a Rev 00000000 Serial ... [ 103.361103] Linux video capture interface: v2.00 [ 103.578601] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 103.578786] saa7134: saa7130[0]: found at 0000:01:02.0, rev: 1, irq: 22, latency: 64, mmio: 0xe3effc00 [ 103.578797] saa7134: saa7130[0]: subsystem: 1461:2115, board: AverMedia AverTV Studio 305 [card=35,autodetected] [ 103.578820] saa7134: saa7130[0]: board init: gpio is 10538 [ 103.609058] Registered IR keymap rc-avermedia [ 103.609242] input: saa7134 IR (AverMedia AverTV St as /devices/pci0000:00/0000:00:1e.0/0000:01:02.0/rc/rc0/input18 [ 103.609356] rc rc0: saa7134 IR (AverMedia AverTV St as /devices/pci0000:00/0000:00:1e.0/0000:01:02.0/rc/rc0 [ 103.650419] nvidia-nvlink: Nvlink Core is being initialized, major device number 245 [ 103.650459] NVRM: The NVIDIA probe routine was not called for 1 device(s). [ 103.650465] NVRM: This can occur when a driver such as: NVRM: nouveau, rivafb, nvidiafb or rivatv NVRM: was loaded and obtained ownership of the NVIDIA device(s). [ 103.650470] NVRM: Try unloading the conflicting kernel module (and/or NVRM: reconfigure your kernel without the conflicting NVRM: driver(s)), then try loading the NVIDIA kernel module NVRM: again. [ 103.650474] NVRM: No NVIDIA graphics adapter probed! [ 103.650478] nvidia-nvlink: Unregistered the Nvlink Core, major device number 245 [ 103.850052] saa7134: i2c eeprom 00: 61 14 15 21 ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850055] saa7134: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850057] saa7134: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850058] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850059] saa7134: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850061] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850062] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850063] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850065] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850066] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850067] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850069] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850070] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850071] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850073] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.850074] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 103.909063] nvidia-nvlink: Nvlink Core is being initialized, major device number 245 [ 103.909096] NVRM: The NVIDIA probe routine was not called for 1 device(s). [ 103.909104] NVRM: This can occur when a driver such as: NVRM: nouveau, rivafb, nvidiafb or rivatv NVRM: was loaded and obtained ownership of the NVIDIA device(s). [ 103.909109] NVRM: Try unloading the conflicting kernel module (and/or NVRM: reconfigure your kernel without the conflicting NVRM: driver(s)), then try loading the NVIDIA kernel module NVRM: again. [ 103.909113] NVRM: No NVIDIA graphics adapter probed! [ 103.909117] nvidia-nvlink: Unregistered the Nvlink Core, major device number 245 [ 103.973403] tda9887 12-0043: creating new instance [ 103.973407] tda9887 12-0043: tda988[5/6/7] found [ 103.977315] tuner 12-0043: Tuner 74 found with type(s) Radio TV. [ 103.988288] tuner 12-0061: Tuner -1 found with type(s) Radio TV. [ 104.004058] tuner-simple 12-0061: creating new instance [ 104.004062] tuner-simple 12-0061: type set to 51 (Philips PAL/SECAM_D (FM 1256 I-H3)) [ 104.036208] coretemp coretemp.0: Using relative temperature scale! [ 104.036236] coretemp coretemp.0: Using relative temperature scale! [ 104.037812] saa7134: saa7130[0]: registered device video0 [v4l2] [ 104.038063] saa7134: saa7130[0]: registered device vbi0 [ 104.038265] saa7134: saa7130[0]: registered device radio0 [ 104.195652] intel_powerclamp: No package C-state available [ 105.471021] ppdev: user-space parallel port driver [ 106.093154] iTCO_vendor_support: vendor-support=0 [ 106.094855] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 106.094931] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 106.095398] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 164.843125] ata1.00: limiting speed to PIO4 [ 164.843131] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 164.843149] ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in Xpwrite, Read disk info 51 00 00 00 00 00 00 00 20 00res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 164.843155] ata1.00: status: { DRDY } [ 167.547031] ata1: soft resetting link [ 167.711255] ata1.00: configured for PIO4 [ 168.061403] ata1: EH complete [ 172.030298] w83627ehf: Found W83627EHG chip at 0x290 [ 172.030355] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_SB.PCI0.SBRG.SIOR.HWRE) (20160831/utaddress-247) [ 172.030364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 177.262990] audit_printk_skb: 45 callbacks suppressed [ 180.853119] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 181.044512] Netfilter messages via NETLINK v0.30. [ 181.048486] ctnetlink v0.93: registering with nfnetlink. [ 183.423508] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 183.430390] r8169 0000:02:00.0 enp2s0: link down [ 183.430392] r8169 0000:02:00.0 enp2s0: link down [ 183.430535] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 183.590237] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 186.006084] r8169 0000:02:00.0 enp2s0: link up [ 186.006101] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 186.380596] NET: Registered protocol family 17 [ 187.579651] audit_printk_skb: 393 callbacks suppressed [ 231.004479] Bluetooth: Core ver 2.22 [ 231.004517] NET: Registered protocol family 31 [ 231.004519] Bluetooth: HCI device and connection manager initialized [ 231.004526] Bluetooth: HCI socket layer initialized [ 231.004533] Bluetooth: L2CAP socket layer initialized [ 231.004544] Bluetooth: SCO socket layer initialized [ 231.070350] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 231.070354] Bluetooth: BNEP filters: protocol multicast [ 231.070364] Bluetooth: BNEP socket layer initialized [ 631.227776] fuse init (API version 7.26) [ 1326.018631] ide-cd driver 5.00 [ 1326.037718] ide-gd driver 1.18 [ 1326.134245] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 1327.968817] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1327.968938] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1330.129453] r8169 0000:02:00.0: invalid short VPD tag 00 at offset 1