[ 0.000000] Linux version 6.0.7-artix1-1 (XXX@XXX) (gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0) #1 SMP PREEMPT_DYNAMIC Thu, 03 Nov 2022 21:10:08 +0000 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=HASH_80F-93C4-2047-E168-6FC2F4A9C872 rw loglevel=3 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20c000-0x00000000db733fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db734000-0x00000000db8c8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db8c9000-0x00000000dba4cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dba4d000-0x00000000dbe6afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbe6b000-0x00000000dcc11fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dcc12000-0x00000000dcca2fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dcca3000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xdbde7000 ACPI=0xdbde7000 SMBIOS=0xdcafc000 SMBIOS 3.0=0xdcafb000 MEMATTR=0xda08a018 ESRT=0xda0bea98 [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X570 AORUS ELITE WIFI/X570 AORUS ELITE WIFI, BIOS F11 12/06/2019 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x81f380 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 3583M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdc2c0000-0xdc2cffff] usable ==> reserved [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000da0bea98 to 0x00000000da0bead0. [ 0.000000] e820: update [mem 0xda0be000-0xda0befff] usable ==> reserved [ 0.000000] Using GB pages for direct mapping [ 0.000000] Secure boot disabled [ 0.000000] RAMDISK: [mem 0x372dd000-0x37965fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DBDE7000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DBDE70A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DBDEDFD0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DBDE7200 006DCB (v02 ALASKA A M I 01072009 INTL 20160930) [ 0.000000] ACPI: FACS 0x00000000DBE53E00 000040 [ 0.000000] ACPI: APIC 0x00000000DBDEE0E8 00015E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DBDEE248 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000DBDEE290 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DBDEE330 0000FC (v02 ALASKA A M I 01072009 AMI 01072009) [ 0.000000] ACPI: SSDT 0x00000000DBDEE430 008C98 (v02 ALASKA A M I 00000002 MSFT 04000000) [ 0.000000] ACPI: SSDT 0x00000000DBDF70C8 00374D (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.000000] ACPI: MCFG 0x00000000DBDFA818 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 0x00000000DBDFA858 0093B7 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.000000] ACPI: HPET 0x00000000DBE03C10 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000DBE03C48 000024 (v01 ALASKA A M I 00001000 INTL 20160930) [ 0.000000] ACPI: UEFI 0x00000000DBE03C70 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.000000] ACPI: BGRT 0x00000000DBE03CB8 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: IVRS 0x00000000DBE03CF0 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000) [ 0.000000] ACPI: PCCT 0x00000000DBE03DC0 00006E (v01 ALASKA A M I 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000DBE03E30 003EC9 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000DBE07D00 000ED8 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000DBE08BD8 000029 (v01 ALASKA A M I 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DBE08C08 001EC3 (v01 ALASKA A M I 00000001 INTL 20160930) [ 0.000000] ACPI: WSMT 0x00000000DBE0AAD0 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Reserving FACP table memory at [mem 0xdbdedfd0-0xdbdee0e3] [ 0.000000] ACPI: Reserving DSDT table memory at [mem 0xdbde7200-0xdbdedfca] [ 0.000000] ACPI: Reserving FACS table memory at [mem 0xdbe53e00-0xdbe53e3f] [ 0.000000] ACPI: Reserving APIC table memory at [mem 0xdbdee0e8-0xdbdee245] [ 0.000000] ACPI: Reserving FPDT table memory at [mem 0xdbdee248-0xdbdee28b] [ 0.000000] ACPI: Reserving FIDT table memory at [mem 0xdbdee290-0xdbdee32b] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbdee330-0xdbdee42b] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbdee430-0xdbdf70c7] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbdf70c8-0xdbdfa814] [ 0.000000] ACPI: Reserving MCFG table memory at [mem 0xdbdfa818-0xdbdfa853] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbdfa858-0xdbe03c0e] [ 0.000000] ACPI: Reserving HPET table memory at [mem 0xdbe03c10-0xdbe03c47] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbe03c48-0xdbe03c6b] [ 0.000000] ACPI: Reserving UEFI table memory at [mem 0xdbe03c70-0xdbe03cb1] [ 0.000000] ACPI: Reserving BGRT table memory at [mem 0xdbe03cb8-0xdbe03cef] [ 0.000000] ACPI: Reserving IVRS table memory at [mem 0xdbe03cf0-0xdbe03dbf] [ 0.000000] ACPI: Reserving PCCT table memory at [mem 0xdbe03dc0-0xdbe03e2d] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbe03e30-0xdbe07cf8] [ 0.000000] ACPI: Reserving CRAT table memory at [mem 0xdbe07d00-0xdbe08bd7] [ 0.000000] ACPI: Reserving CDIT table memory at [mem 0xdbe08bd8-0xdbe08c00] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xdbe08c08-0xdbe0aaca] [ 0.000000] ACPI: Reserving WSMT table memory at [mem 0xdbe0aad0-0xdbe0aaf7] [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x81f37c000-0x81f37ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000081f37ffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009e01fff] [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.000000] node 0: [mem 0x000000000a20c000-0x00000000db733fff] [ 0.000000] node 0: [mem 0x00000000db8c9000-0x00000000dba4cfff] [ 0.000000] node 0: [mem 0x00000000dcca3000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000081f37ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 510 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 12 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 405 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 4694 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] e820: update [mem 0xd7b4c000-0xd7ba2fff] usable ==> reserved [ 0.000000] smpboot: Allowing 32 CPUs, 16 hotplug CPUs [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09e02000-0x09ffffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20bfff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7b4c000-0xd7ba2fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xda0be000-0xda0befff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdb734000-0xdb8c8fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdba4d000-0xdbe6afff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdbe6b000-0xdcc11fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdcc12000-0xdcca2fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff] [ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:32 nr_node_ids:1 [ 0.000000] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8244564 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=HASH_80F-93C4-2047-E168-6FC2F4A9C872 rw loglevel=3 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space. [ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 126976 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 262144 bytes [ 0.000000] printk: early log buf free: 119384(91%) [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] software IO TLB: area num 32. [ 0.000000] Memory: 32697252K/33502376K available (14343K kernel code, 2078K rwdata, 11324K rodata, 2124K init, 3540K bss, 804864K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.000000] ftrace: allocating 45784 entries in 179 pages [ 0.000000] ftrace: allocated 179 pages with 5 groups [ 0.000000] Dynamic Preempt: full [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=32. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.000000] NR_IRQS: 20736, nr_irqs: 1224, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.000000] random: crng init done [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] printk: console [tty0] enabled [ 0.000000] ACPI: Core revision 20220331 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] AMD-Vi: Using global IVHD EFR:0x58f77ef22294ade, EFR2:0x0 [ 0.000000] Switched APIC routing to physical flat. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023333] tsc: PIT calibration matches HPET. 2 loops [ 0.023333] tsc: Detected 3593.299 MHz processor [ 0.000001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cb98b6cda, max_idle_ns: 440795238440 ns [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 7189.03 BogoMIPS (lpj=11977663) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.002748] LSM: Security Framework initializing [ 0.002752] landlock: Up and running. [ 0.002753] Yama: becoming mindful. [ 0.002758] LSM support for eBPF active [ 0.002800] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.002832] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.002981] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.003020] LVT offset 1 assigned for vector 0xf9 [ 0.003150] LVT offset 2 assigned for vector 0xf4 [ 0.003181] process: using mwait in idle threads [ 0.003181] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.003182] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 0.003185] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.003186] Spectre V2 : Mitigation: Retpolines [ 0.003186] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.003187] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.003187] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.003188] RETBleed: Mitigation: untrained return thunk [ 0.003189] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.003189] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation [ 0.003190] Spectre V2 : User space: Mitigation: STIBP always-on protection [ 0.003191] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.009511] Freeing SMP alternatives memory: 36K [ 0.116706] smpboot: CPU0: AMD Ryzen 7 3700X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0) [ 0.116788] cblist_init_generic: Setting adjustable number of callback queues. [ 0.116791] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.116799] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.116810] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.116817] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.116819] ... version: 0 [ 0.116820] ... bit width: 48 [ 0.116820] ... generic registers: 6 [ 0.116821] ... value mask: 0000ffffffffffff [ 0.116821] ... max period: 00007fffffffffff [ 0.116822] ... fixed-purpose events: 0 [ 0.116822] ... event mask: 000000000000003f [ 0.116865] rcu: Hierarchical SRCU implementation. [ 0.116865] rcu: Max phase no-delay instances is 1000. [ 0.117144] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.117289] smp: Bringing up secondary CPUs ... [ 0.117346] x86: Booting SMP configuration: [ 0.117346] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 [ 0.135565] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 0.135565] #9 #10 #11 #12 #13 #14 #15 [ 0.150033] smp: Brought up 1 node, 16 CPUs [ 0.150033] smpboot: Max logical packages: 2 [ 0.150033] smpboot: Total of 16 processors activated (115031.63 BogoMIPS) [ 0.151662] devtmpfs: initialized [ 0.151662] x86/mm: Memory block size: 128MB [ 0.154285] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes) [ 0.154285] ACPI: PM: Registering ACPI NVS region [mem 0xdba4d000-0xdbe6afff] (4317184 bytes) [ 0.154285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.154285] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.154285] pinctrl core: initialized pinctrl subsystem [ 0.154285] PM: RTC time: 02:17:32, date: 2022-11-29 [ 0.154285] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.154285] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.154285] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.154438] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.154455] thermal_sys: Registered thermal governor 'fair_share' [ 0.154455] thermal_sys: Registered thermal governor 'bang_bang' [ 0.154455] thermal_sys: Registered thermal governor 'step_wise' [ 0.154455] thermal_sys: Registered thermal governor 'user_space' [ 0.154455] thermal_sys: Registered thermal governor 'power_allocator' [ 0.154455] cpuidle: using governor ladder [ 0.154455] cpuidle: using governor menu [ 0.154455] Detected 1 PCC Subspaces [ 0.154455] Registering PCC driver as Mailbox controller [ 0.154455] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.154455] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.154455] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.154455] PCI: Using configuration type 1 for base access [ 0.156710] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.160020] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.160020] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.160020] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.160020] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.160070] ACPI: Added _OSI(Module Device) [ 0.160071] ACPI: Added _OSI(Processor Device) [ 0.160071] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.160072] ACPI: Added _OSI(Processor Aggregator Device) [ 0.160073] ACPI: Added _OSI(Linux-Dell-Video) [ 0.160073] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.160074] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.172254] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.173558] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.180957] ACPI: Interpreter enabled [ 0.180957] ACPI: PM: (supports S0 S3 S4 S5) [ 0.180957] ACPI: Using IOAPIC for interrupt routing [ 0.180957] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.180957] PCI: Using E820 reservations for host bridge windows [ 0.180957] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.187269] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.187274] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.187347] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] [ 0.187486] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.187493] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.187837] PCI host bridge to bus 0000:00 [ 0.187839] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.187840] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.187841] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.187842] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.187843] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.187844] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec02fff window] [ 0.187845] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.187846] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.187858] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 [ 0.187931] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 [ 0.188008] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 [ 0.188055] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400 [ 0.188080] pci 0000:00:01.1: enabling Extended Tags [ 0.188126] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.188272] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 [ 0.188297] pci 0000:00:01.2: enabling Extended Tags [ 0.188343] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.188449] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 [ 0.188500] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 [ 0.188545] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 [ 0.188614] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.188760] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 [ 0.188810] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 [ 0.188860] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 [ 0.188905] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 [ 0.188928] pci 0000:00:07.1: enabling Extended Tags [ 0.188966] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.189042] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 [ 0.189088] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 [ 0.189113] pci 0000:00:08.1: enabling Extended Tags [ 0.189154] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.189235] pci 0000:00:08.2: [1022:1484] type 01 class 0x060400 [ 0.189260] pci 0000:00:08.2: enabling Extended Tags [ 0.189301] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.189378] pci 0000:00:08.3: [1022:1484] type 01 class 0x060400 [ 0.189403] pci 0000:00:08.3: enabling Extended Tags [ 0.189445] pci 0000:00:08.3: PME# supported from D0 D3hot D3cold [ 0.189539] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.189640] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.189748] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 [ 0.189771] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 [ 0.189793] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 [ 0.189815] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 [ 0.189837] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 [ 0.189858] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 [ 0.189881] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 [ 0.189903] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 [ 0.189972] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802 [ 0.189991] pci 0000:01:00.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit] [ 0.190185] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.190189] pci 0000:00:01.1: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.190236] pci 0000:02:00.0: [1022:57ad] type 01 class 0x060400 [ 0.190292] pci 0000:02:00.0: enabling Extended Tags [ 0.190375] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.190473] pci 0000:02:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link) [ 0.190542] pci 0000:00:01.2: PCI bridge to [bus 02-09] [ 0.190545] pci 0000:00:01.2: bridge window [io 0xf000-0xffff] [ 0.190547] pci 0000:00:01.2: bridge window [mem 0xf7200000-0xf78fffff] [ 0.190792] pci 0000:03:03.0: [1022:57a3] type 01 class 0x060400 [ 0.190863] pci 0000:03:03.0: enabling Extended Tags [ 0.191115] pci 0000:03:03.0: PME# supported from D0 D3hot D3cold [ 0.191435] pci 0000:03:04.0: [1022:57a3] type 01 class 0x060400 [ 0.191506] pci 0000:03:04.0: enabling Extended Tags [ 0.191741] pci 0000:03:04.0: PME# supported from D0 D3hot D3cold [ 0.192187] pci 0000:03:06.0: [1022:57a3] type 01 class 0x060400 [ 0.192258] pci 0000:03:06.0: enabling Extended Tags [ 0.192494] pci 0000:03:06.0: PME# supported from D0 D3hot D3cold [ 0.192824] pci 0000:03:08.0: [1022:57a4] type 01 class 0x060400 [ 0.192911] pci 0000:03:08.0: enabling Extended Tags [ 0.193069] pci 0000:03:08.0: PME# supported from D0 D3hot D3cold [ 0.193263] pci 0000:03:09.0: [1022:57a4] type 01 class 0x060400 [ 0.193333] pci 0000:03:09.0: enabling Extended Tags [ 0.193494] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold [ 0.193667] pci 0000:03:0a.0: [1022:57a4] type 01 class 0x060400 [ 0.193737] pci 0000:03:0a.0: enabling Extended Tags [ 0.193895] pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold [ 0.194079] pci 0000:02:00.0: PCI bridge to [bus 03-09] [ 0.194085] pci 0000:02:00.0: bridge window [io 0xf000-0xffff] [ 0.194089] pci 0000:02:00.0: bridge window [mem 0xf7200000-0xf78fffff] [ 0.194218] pci 0000:04:00.0: [8086:24fb] type 00 class 0x028000 [ 0.194263] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf7801fff 64bit] [ 0.194488] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.194704] pci 0000:03:03.0: PCI bridge to [bus 04] [ 0.194712] pci 0000:03:03.0: bridge window [mem 0xf7800000-0xf78fffff] [ 0.194836] pci 0000:05:00.0: [8086:1539] type 00 class 0x020000 [ 0.194869] pci 0000:05:00.0: reg 0x10: [mem 0xf7700000-0xf771ffff] [ 0.194902] pci 0000:05:00.0: reg 0x18: [io 0xf000-0xf01f] [ 0.194919] pci 0000:05:00.0: reg 0x1c: [mem 0xf7720000-0xf7723fff] [ 0.195095] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.195270] pci 0000:03:04.0: PCI bridge to [bus 05] [ 0.195276] pci 0000:03:04.0: bridge window [io 0xf000-0xffff] [ 0.195280] pci 0000:03:04.0: bridge window [mem 0xf7700000-0xf77fffff] [ 0.195386] pci 0000:06:00.0: [1b73:1100] type 00 class 0x0c0330 [ 0.195419] pci 0000:06:00.0: reg 0x10: [mem 0xf7600000-0xf760ffff 64bit] [ 0.195440] pci 0000:06:00.0: reg 0x18: [mem 0xf7611000-0xf7611fff 64bit] [ 0.195460] pci 0000:06:00.0: reg 0x20: [mem 0xf7610000-0xf7610fff 64bit] [ 0.195556] pci 0000:06:00.0: supports D1 [ 0.195557] pci 0000:06:00.0: PME# supported from D0 D1 D3hot [ 0.195685] pci 0000:03:06.0: PCI bridge to [bus 06] [ 0.195694] pci 0000:03:06.0: bridge window [mem 0xf7600000-0xf76fffff] [ 0.195809] pci 0000:07:00.0: [1022:1485] type 00 class 0x130000 [ 0.195877] pci 0000:07:00.0: enabling Extended Tags [ 0.196037] pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.196197] pci 0000:07:00.1: [1022:149c] type 00 class 0x0c0330 [ 0.196523] pci 0000:07:00.1: reg 0x10: [mem 0xf7300000-0xf73fffff 64bit] [ 0.197352] pci 0000:07:00.1: enabling Extended Tags [ 0.197851] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold [ 0.198192] pci 0000:07:00.3: [1022:149c] type 00 class 0x0c0330 [ 0.198219] pci 0000:07:00.3: reg 0x10: [mem 0xf7200000-0xf72fffff 64bit] [ 0.198278] pci 0000:07:00.3: enabling Extended Tags [ 0.198350] pci 0000:07:00.3: PME# supported from D0 D3hot D3cold [ 0.198481] pci 0000:03:08.0: PCI bridge to [bus 07] [ 0.198489] pci 0000:03:08.0: bridge window [mem 0xf7200000-0xf73fffff] [ 0.198584] pci 0000:08:00.0: [1022:7901] type 00 class 0x010601 [ 0.198655] pci 0000:08:00.0: reg 0x24: [mem 0xf7500000-0xf75007ff] [ 0.198674] pci 0000:08:00.0: enabling Extended Tags [ 0.198771] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 0.198851] pci 0000:08:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.198900] pci 0000:03:09.0: PCI bridge to [bus 08] [ 0.198908] pci 0000:03:09.0: bridge window [mem 0xf7500000-0xf75fffff] [ 0.199004] pci 0000:09:00.0: [1022:7901] type 00 class 0x010601 [ 0.199074] pci 0000:09:00.0: reg 0x24: [mem 0xf7400000-0xf74007ff] [ 0.199094] pci 0000:09:00.0: enabling Extended Tags [ 0.199190] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.199270] pci 0000:09:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.199318] pci 0000:03:0a.0: PCI bridge to [bus 09] [ 0.199327] pci 0000:03:0a.0: bridge window [mem 0xf7400000-0xf74fffff] [ 0.199411] pci 0000:0a:00.0: [10de:2206] type 00 class 0x030000 [ 0.199421] pci 0000:0a:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.199430] pci 0000:0a:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.199439] pci 0000:0a:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.199444] pci 0000:0a:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.199450] pci 0000:0a:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.199464] pci 0000:0a:00.0: BAR 1: assigned to efifb [ 0.199468] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.199508] pci 0000:0a:00.0: PME# supported from D0 D3hot [ 0.199601] pci 0000:0a:00.1: [10de:1aef] type 00 class 0x040300 [ 0.199612] pci 0000:0a:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.199729] pci 0000:00:03.1: PCI bridge to [bus 0a] [ 0.199732] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.199734] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] [ 0.199737] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.199772] pci 0000:0b:00.0: [1022:148a] type 00 class 0x130000 [ 0.199799] pci 0000:0b:00.0: enabling Extended Tags [ 0.199906] pci 0000:00:07.1: PCI bridge to [bus 0b] [ 0.199954] pci 0000:0c:00.0: [1022:1485] type 00 class 0x130000 [ 0.200004] pci 0000:0c:00.0: enabling Extended Tags [ 0.200115] pci 0000:0c:00.1: [1022:1486] type 00 class 0x108000 [ 0.200131] pci 0000:0c:00.1: reg 0x18: [mem 0xf7a00000-0xf7afffff] [ 0.200142] pci 0000:0c:00.1: reg 0x24: [mem 0xf7b08000-0xf7b09fff] [ 0.200150] pci 0000:0c:00.1: enabling Extended Tags [ 0.200247] pci 0000:0c:00.3: [1022:149c] type 00 class 0x0c0330 [ 0.200261] pci 0000:0c:00.3: reg 0x10: [mem 0xf7900000-0xf79fffff 64bit] [ 0.200290] pci 0000:0c:00.3: enabling Extended Tags [ 0.200334] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold [ 0.200412] pci 0000:0c:00.4: [1022:1487] type 00 class 0x040300 [ 0.200422] pci 0000:0c:00.4: reg 0x10: [mem 0xf7b00000-0xf7b07fff] [ 0.200448] pci 0000:0c:00.4: enabling Extended Tags [ 0.200490] pci 0000:0c:00.4: PME# supported from D0 D3hot D3cold [ 0.200568] pci 0000:00:08.1: PCI bridge to [bus 0c] [ 0.200572] pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf7bfffff] [ 0.200611] pci 0000:0d:00.0: [1022:7901] type 00 class 0x010601 [ 0.200646] pci 0000:0d:00.0: reg 0x24: [mem 0xf7d00000-0xf7d007ff] [ 0.200655] pci 0000:0d:00.0: enabling Extended Tags [ 0.200711] pci 0000:0d:00.0: PME# supported from D3hot D3cold [ 0.200795] pci 0000:00:08.2: PCI bridge to [bus 0d] [ 0.200799] pci 0000:00:08.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.200838] pci 0000:0e:00.0: [1022:7901] type 00 class 0x010601 [ 0.200872] pci 0000:0e:00.0: reg 0x24: [mem 0xf7c00000-0xf7c007ff] [ 0.200882] pci 0000:0e:00.0: enabling Extended Tags [ 0.200938] pci 0000:0e:00.0: PME# supported from D3hot D3cold [ 0.201022] pci 0000:00:08.3: PCI bridge to [bus 0e] [ 0.201026] pci 0000:00:08.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.201264] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.201308] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.201345] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.201392] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.201433] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.201468] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.201502] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.201537] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.202115] iommu: Default domain type: Translated [ 0.202116] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.202207] SCSI subsystem initialized [ 0.203349] libata version 3.00 loaded. [ 0.203349] ACPI: bus type USB registered [ 0.203352] usbcore: registered new interface driver usbfs [ 0.203356] usbcore: registered new interface driver hub [ 0.203361] usbcore: registered new device driver usb [ 0.203370] pps_core: LinuxPPS API ver. 1 registered [ 0.203371] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.203373] PTP clock support registered [ 0.203378] EDAC MC: Ver: 3.0.0 [ 0.203506] Registered efivars operations [ 0.203506] NetLabel: Initializing [ 0.203506] NetLabel: domain hash size = 128 [ 0.203506] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.203506] NetLabel: unlabeled traffic allowed by default [ 0.203506] mctp: management component transport protocol core [ 0.203506] NET: Registered PF_MCTP protocol family [ 0.203506] PCI: Using ACPI for IRQ routing [ 0.204216] PCI: pci_cache_line_size set to 64 bytes [ 0.204314] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.204315] e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff] [ 0.204317] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.204317] e820: reserve RAM buffer [mem 0xd7b4c000-0xd7ffffff] [ 0.204318] e820: reserve RAM buffer [mem 0xda0be000-0xdbffffff] [ 0.204319] e820: reserve RAM buffer [mem 0xdb734000-0xdbffffff] [ 0.204319] e820: reserve RAM buffer [mem 0xdba4d000-0xdbffffff] [ 0.204320] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.204321] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff] [ 0.204327] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.204327] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.204327] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.204327] vgaarb: loaded [ 0.206693] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.206695] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.208759] clocksource: Switched to clocksource tsc-early [ 0.208830] VFS: Disk quotas dquot_6.6.0 [ 0.208840] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.208878] pnp: PnP ACPI init [ 0.208936] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.208967] system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved [ 0.208967] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.208967] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.208967] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.208967] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.208967] system 00:04: [io 0x040b] has been reserved [ 0.208967] system 00:04: [io 0x04d6] has been reserved [ 0.208967] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.208967] system 00:04: [io 0x0c14] has been reserved [ 0.208967] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.208967] system 00:04: [io 0x0c52] has been reserved [ 0.208967] system 00:04: [io 0x0c6c] has been reserved [ 0.208967] system 00:04: [io 0x0c6f] has been reserved [ 0.208967] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.208967] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.208967] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.208967] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.208967] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.208967] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.208967] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.208967] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.208967] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.208967] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.208967] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.208967] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.208967] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.208967] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.208967] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.208967] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.208967] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.208967] pnp: PnP ACPI: found 5 devices [ 0.212896] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.212947] NET: Registered PF_INET protocol family [ 0.213078] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.215013] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.215043] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.215158] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.215396] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.215458] TCP: Hash tables configured (established 262144 bind 65536) [ 0.215561] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.215620] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.215679] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.215748] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.215752] NET: Registered PF_XDP protocol family [ 0.215764] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.215768] pci 0000:00:01.1: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.215774] pci 0000:03:03.0: PCI bridge to [bus 04] [ 0.215778] pci 0000:03:03.0: bridge window [mem 0xf7800000-0xf78fffff] [ 0.215788] pci 0000:03:04.0: PCI bridge to [bus 05] [ 0.215790] pci 0000:03:04.0: bridge window [io 0xf000-0xffff] [ 0.215795] pci 0000:03:04.0: bridge window [mem 0xf7700000-0xf77fffff] [ 0.215804] pci 0000:03:06.0: PCI bridge to [bus 06] [ 0.215809] pci 0000:03:06.0: bridge window [mem 0xf7600000-0xf76fffff] [ 0.215818] pci 0000:03:08.0: PCI bridge to [bus 07] [ 0.215822] pci 0000:03:08.0: bridge window [mem 0xf7200000-0xf73fffff] [ 0.215831] pci 0000:03:09.0: PCI bridge to [bus 08] [ 0.215836] pci 0000:03:09.0: bridge window [mem 0xf7500000-0xf75fffff] [ 0.215845] pci 0000:03:0a.0: PCI bridge to [bus 09] [ 0.215850] pci 0000:03:0a.0: bridge window [mem 0xf7400000-0xf74fffff] [ 0.215859] pci 0000:02:00.0: PCI bridge to [bus 03-09] [ 0.215861] pci 0000:02:00.0: bridge window [io 0xf000-0xffff] [ 0.215866] pci 0000:02:00.0: bridge window [mem 0xf7200000-0xf78fffff] [ 0.215875] pci 0000:00:01.2: PCI bridge to [bus 02-09] [ 0.215876] pci 0000:00:01.2: bridge window [io 0xf000-0xffff] [ 0.215878] pci 0000:00:01.2: bridge window [mem 0xf7200000-0xf78fffff] [ 0.215884] pci 0000:00:03.1: PCI bridge to [bus 0a] [ 0.215885] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.215887] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff] [ 0.215889] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.215893] pci 0000:00:07.1: PCI bridge to [bus 0b] [ 0.215899] pci 0000:00:08.1: PCI bridge to [bus 0c] [ 0.215902] pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf7bfffff] [ 0.215906] pci 0000:00:08.2: PCI bridge to [bus 0d] [ 0.215908] pci 0000:00:08.2: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.215912] pci 0000:00:08.3: PCI bridge to [bus 0e] [ 0.215915] pci 0000:00:08.3: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.215920] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.215921] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.215922] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.215923] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.215924] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.215925] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec02fff window] [ 0.215925] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window] [ 0.215927] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.215928] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 0.215929] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf78fffff] [ 0.215930] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ 0.215930] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf78fffff] [ 0.215931] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff] [ 0.215932] pci_bus 0000:05: resource 0 [io 0xf000-0xffff] [ 0.215933] pci_bus 0000:05: resource 1 [mem 0xf7700000-0xf77fffff] [ 0.215934] pci_bus 0000:06: resource 1 [mem 0xf7600000-0xf76fffff] [ 0.215935] pci_bus 0000:07: resource 1 [mem 0xf7200000-0xf73fffff] [ 0.215936] pci_bus 0000:08: resource 1 [mem 0xf7500000-0xf75fffff] [ 0.215937] pci_bus 0000:09: resource 1 [mem 0xf7400000-0xf74fffff] [ 0.215938] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff] [ 0.215939] pci_bus 0000:0a: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.215939] pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.215941] pci_bus 0000:0c: resource 1 [mem 0xf7900000-0xf7bfffff] [ 0.215941] pci_bus 0000:0d: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.215942] pci_bus 0000:0e: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.216433] pci 0000:0a:00.1: D0 power state depends on 0000:0a:00.0 [ 0.216554] PCI: CLS 64 bytes, default 64 [ 0.216562] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.216585] pci 0000:00:01.0: Adding to iommu group 0 [ 0.216586] Trying to unpack rootfs image as initramfs... [ 0.216593] pci 0000:00:01.1: Adding to iommu group 1 [ 0.216600] pci 0000:00:01.2: Adding to iommu group 2 [ 0.216608] pci 0000:00:02.0: Adding to iommu group 3 [ 0.216617] pci 0000:00:03.0: Adding to iommu group 4 [ 0.216624] pci 0000:00:03.1: Adding to iommu group 5 [ 0.216633] pci 0000:00:04.0: Adding to iommu group 6 [ 0.216641] pci 0000:00:05.0: Adding to iommu group 7 [ 0.216651] pci 0000:00:07.0: Adding to iommu group 8 [ 0.216658] pci 0000:00:07.1: Adding to iommu group 9 [ 0.216670] pci 0000:00:08.0: Adding to iommu group 10 [ 0.216677] pci 0000:00:08.1: Adding to iommu group 11 [ 0.216685] pci 0000:00:08.2: Adding to iommu group 12 [ 0.216692] pci 0000:00:08.3: Adding to iommu group 13 [ 0.216703] pci 0000:00:14.0: Adding to iommu group 14 [ 0.216709] pci 0000:00:14.3: Adding to iommu group 14 [ 0.216735] pci 0000:00:18.0: Adding to iommu group 15 [ 0.216741] pci 0000:00:18.1: Adding to iommu group 15 [ 0.216747] pci 0000:00:18.2: Adding to iommu group 15 [ 0.216753] pci 0000:00:18.3: Adding to iommu group 15 [ 0.216759] pci 0000:00:18.4: Adding to iommu group 15 [ 0.216765] pci 0000:00:18.5: Adding to iommu group 15 [ 0.216771] pci 0000:00:18.6: Adding to iommu group 15 [ 0.216777] pci 0000:00:18.7: Adding to iommu group 15 [ 0.216784] pci 0000:01:00.0: Adding to iommu group 16 [ 0.216791] pci 0000:02:00.0: Adding to iommu group 17 [ 0.216820] pci 0000:03:03.0: Adding to iommu group 18 [ 0.216850] pci 0000:03:04.0: Adding to iommu group 19 [ 0.216880] pci 0000:03:06.0: Adding to iommu group 20 [ 0.216903] pci 0000:03:08.0: Adding to iommu group 21 [ 0.216916] pci 0000:03:09.0: Adding to iommu group 22 [ 0.216932] pci 0000:03:0a.0: Adding to iommu group 23 [ 0.216962] pci 0000:04:00.0: Adding to iommu group 24 [ 0.216992] pci 0000:05:00.0: Adding to iommu group 25 [ 0.217021] pci 0000:06:00.0: Adding to iommu group 26 [ 0.217024] pci 0000:07:00.0: Adding to iommu group 21 [ 0.217026] pci 0000:07:00.1: Adding to iommu group 21 [ 0.217029] pci 0000:07:00.3: Adding to iommu group 21 [ 0.217031] pci 0000:08:00.0: Adding to iommu group 22 [ 0.217035] pci 0000:09:00.0: Adding to iommu group 23 [ 0.217046] pci 0000:0a:00.0: Adding to iommu group 27 [ 0.217054] pci 0000:0a:00.1: Adding to iommu group 27 [ 0.217060] pci 0000:0b:00.0: Adding to iommu group 28 [ 0.217068] pci 0000:0c:00.0: Adding to iommu group 29 [ 0.217076] pci 0000:0c:00.1: Adding to iommu group 30 [ 0.217084] pci 0000:0c:00.3: Adding to iommu group 31 [ 0.217092] pci 0000:0c:00.4: Adding to iommu group 32 [ 0.217099] pci 0000:0d:00.0: Adding to iommu group 33 [ 0.217106] pci 0000:0e:00.0: Adding to iommu group 34 [ 0.221063] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.221066] AMD-Vi: Extended features (0x58f77ef22294ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC [ 0.221070] AMD-Vi: Interrupt remapping enabled [ 0.221070] AMD-Vi: X2APIC enabled [ 0.221079] AMD-Vi: Virtual APIC enabled [ 0.221155] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.221156] software IO TLB: mapped [mem 0x00000000d32cc000-0x00000000d72cc000] (64MB) [ 0.221180] LVT offset 0 assigned for vector 0x400 [ 0.221295] perf: AMD IBS detected (0x000003ff) [ 0.221299] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.222385] Initialise system trusted keyrings [ 0.222392] Key type blacklist registered [ 0.222415] workingset: timestamp_bits=41 max_order=23 bucket_order=0 [ 0.223104] zbud: loaded [ 0.223217] integrity: Platform Keyring initialized [ 0.223218] integrity: Machine keyring initialized [ 0.225523] Key type asymmetric registered [ 0.225524] Asymmetric key parser 'x509' registered [ 0.244006] Freeing initrd memory: 6692K [ 0.245594] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.245609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.245640] io scheduler mq-deadline registered [ 0.245641] io scheduler kyber registered [ 0.245661] io scheduler bfq registered [ 0.246820] pcieport 0000:00:01.1: PME: Signaling with IRQ 27 [ 0.246858] pcieport 0000:00:01.1: AER: enabled with IRQ 27 [ 0.246956] pcieport 0000:00:01.2: PME: Signaling with IRQ 28 [ 0.247000] pcieport 0000:00:01.2: AER: enabled with IRQ 28 [ 0.247093] pcieport 0000:00:03.1: PME: Signaling with IRQ 29 [ 0.247129] pcieport 0000:00:03.1: AER: enabled with IRQ 29 [ 0.247279] pcieport 0000:00:07.1: PME: Signaling with IRQ 31 [ 0.247313] pcieport 0000:00:07.1: AER: enabled with IRQ 31 [ 0.247393] pcieport 0000:00:08.1: PME: Signaling with IRQ 32 [ 0.247435] pcieport 0000:00:08.1: AER: enabled with IRQ 32 [ 0.247547] pcieport 0000:00:08.2: PME: Signaling with IRQ 33 [ 0.247579] pcieport 0000:00:08.2: AER: enabled with IRQ 33 [ 0.247689] pcieport 0000:00:08.3: PME: Signaling with IRQ 34 [ 0.247721] pcieport 0000:00:08.3: AER: enabled with IRQ 34 [ 0.249219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.249293] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.249303] ACPI: button: Power Button [PWRB] [ 0.249322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.249347] ACPI: button: Power Button [PWRF] [ 0.252345] Estimated ratio of average max frequency by base frequency (times 1024): 1155 [ 0.252355] Monitor-Mwait will be used to enter C-1 state [ 0.252360] ACPI: \_PR_.C000: Found 2 idle states [ 0.252434] ACPI: \_PR_.C002: Found 2 idle states [ 0.252513] ACPI: \_PR_.C004: Found 2 idle states [ 0.252575] ACPI: \_PR_.C006: Found 2 idle states [ 0.252653] ACPI: \_PR_.C008: Found 2 idle states [ 0.252737] ACPI: \_PR_.C00A: Found 2 idle states [ 0.252819] ACPI: \_PR_.C00C: Found 2 idle states [ 0.252894] ACPI: \_PR_.C00E: Found 2 idle states [ 0.252948] ACPI: \_PR_.C001: Found 2 idle states [ 0.252999] ACPI: \_PR_.C003: Found 2 idle states [ 0.253073] ACPI: \_PR_.C005: Found 2 idle states [ 0.253145] ACPI: \_PR_.C007: Found 2 idle states [ 0.253226] ACPI: \_PR_.C009: Found 2 idle states [ 0.253307] ACPI: \_PR_.C00B: Found 2 idle states [ 0.253390] ACPI: \_PR_.C00D: Found 2 idle states [ 0.253469] ACPI: \_PR_.C00F: Found 2 idle states [ 1.227111] tsc: Refined TSC clocksource calibration: 3593.248 MHz [ 1.227123] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb68e6ea4, max_idle_ns: 440795288133 ns [ 1.227151] clocksource: Switched to clocksource tsc [ 2.375384] ACPI: \_TZ_.TZ10: Invalid passive threshold [ 2.375625] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.375626] ACPI: thermal: Thermal Zone [TZ10] (17 C) [ 2.375684] ACPI: \_TZ_.PCT0: Invalid passive threshold [ 2.375728] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.375728] ACPI: thermal: Thermal Zone [PCT0] (17 C) [ 2.376056] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.376892] Non-volatile memory driver v1.3 [ 2.376893] Linux agpgart interface v0.103 [ 2.376938] AMD-Vi: AMD IOMMUv2 loaded and initialized [ 2.376968] ACPI: bus type drm_connector registered [ 2.377923] ahci 0000:08:00.0: version 3.0 [ 2.378189] ahci 0000:08:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode [ 2.378191] ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs [ 2.378394] scsi host0: ahci [ 2.378464] scsi host1: ahci [ 2.378512] scsi host2: ahci [ 2.378558] scsi host3: ahci [ 2.378578] ata1: DUMMY [ 2.378579] ata2: DUMMY [ 2.378581] ata3: SATA max UDMA/133 abar m2048@0xf7500000 port 0xf7500200 irq 45 [ 2.378584] ata4: SATA max UDMA/133 abar m2048@0xf7500000 port 0xf7500280 irq 46 [ 2.378862] ahci 0000:09:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x33 impl SATA mode [ 2.378864] ahci 0000:09:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs [ 2.379124] scsi host4: ahci [ 2.379172] scsi host5: ahci [ 2.379216] scsi host6: ahci [ 2.379258] scsi host7: ahci [ 2.379300] scsi host8: ahci [ 2.379342] scsi host9: ahci [ 2.379360] ata5: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400100 irq 59 [ 2.379363] ata6: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400180 irq 60 [ 2.379363] ata7: DUMMY [ 2.379364] ata8: DUMMY [ 2.379366] ata9: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400300 irq 63 [ 2.379368] ata10: SATA max UDMA/133 abar m2048@0xf7400000 port 0xf7400380 irq 64 [ 2.379464] ahci 0000:0d:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 2.379466] ahci 0000:0d:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 2.379545] scsi host10: ahci [ 2.379563] ata11: SATA max UDMA/133 abar m2048@0xf7d00000 port 0xf7d00100 irq 76 [ 2.379651] ahci 0000:0e:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 2.379652] ahci 0000:0e:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 2.379727] scsi host11: ahci [ 2.379745] ata12: SATA max UDMA/133 abar m2048@0xf7c00000 port 0xf7c00100 irq 78 [ 2.379765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.379767] ehci-pci: EHCI PCI platform driver [ 2.379773] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.379774] ohci-pci: OHCI PCI platform driver [ 2.379781] uhci_hcd: USB Universal Host Controller Interface driver [ 2.379799] usbcore: registered new interface driver usbserial_generic [ 2.379802] usbserial: USB Serial support registered for generic [ 2.379842] rtc_cmos 00:02: RTC can wake from S4 [ 2.380029] rtc_cmos 00:02: registered as rtc0 [ 2.380057] rtc_cmos 00:02: setting system clock to 2022-11-29T02:17:34 UTC (1669688254) [ 2.380066] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.380208] ledtrig-cpu: registered to indicate activity on CPUs [ 2.380296] efifb: probing for efifb [ 2.380314] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 2.380315] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 2.380316] efifb: scrolling: redraw [ 2.380317] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.380337] fbcon: Deferring console take-over [ 2.380337] fb0: EFI VGA frame buffer device [ 2.380349] hid: raw HID events driver (C) Jiri Kosina [ 2.380396] drop_monitor: Initializing network drop monitor service [ 2.388460] Initializing XFRM netlink socket [ 2.388512] NET: Registered PF_INET6 protocol family [ 2.390949] Segment Routing with IPv6 [ 2.390953] RPL Segment Routing with IPv6 [ 2.390962] In-situ OAM (IOAM) with IPv6 [ 2.390987] NET: Registered PF_PACKET protocol family [ 2.391777] microcode: CPU0: patch_level=0x08701013 [ 2.391789] microcode: CPU1: patch_level=0x08701013 [ 2.391803] microcode: CPU2: patch_level=0x08701013 [ 2.391807] microcode: CPU3: patch_level=0x08701013 [ 2.391811] microcode: CPU4: patch_level=0x08701013 [ 2.391824] microcode: CPU5: patch_level=0x08701013 [ 2.391828] microcode: CPU6: patch_level=0x08701013 [ 2.391832] microcode: CPU7: patch_level=0x08701013 [ 2.391837] microcode: CPU8: patch_level=0x08701013 [ 2.391842] microcode: CPU9: patch_level=0x08701013 [ 2.391847] microcode: CPU10: patch_level=0x08701013 [ 2.391852] microcode: CPU11: patch_level=0x08701013 [ 2.391856] microcode: CPU12: patch_level=0x08701013 [ 2.391860] microcode: CPU13: patch_level=0x08701013 [ 2.391864] microcode: CPU14: patch_level=0x08701013 [ 2.391868] microcode: CPU15: patch_level=0x08701013 [ 2.391871] microcode: Microcode Update Driver: v2.2. [ 2.391983] resctrl: L3 allocation detected [ 2.391984] resctrl: MB allocation detected [ 2.391985] resctrl: L3 monitoring detected [ 2.391988] IPI shorthand broadcast: enabled [ 2.392001] sched_clock: Marking stable (2415307459, -23330007)->(2394077320, -2099868) [ 2.392294] registered taskstats version 1 [ 2.392509] Loading compiled-in X.509 certificates [ 2.394719] Loaded X.509 cert 'Build time autogenerated kernel key: 4aa9929e26ca561251c2da855f9cb17cdc53e6c9' [ 2.395312] zswap: loaded using pool lz4/z3fold [ 2.395492] Key type ._fscrypt registered [ 2.395493] Key type .fscrypt registered [ 2.395494] Key type fscrypt-provisioning registered [ 2.396760] PM: Magic number: 14:140:259 [ 2.396781] event_source ibs_op: hash matches [ 2.396887] RAS: Correctable Errors collector initialized. [ 2.687662] ata3: SATA link down (SStatus 0 SControl 300) [ 2.689841] ata4: SATA link down (SStatus 0 SControl 300) [ 2.690148] ata12: SATA link down (SStatus 0 SControl 300) [ 2.692921] ata11: SATA link down (SStatus 0 SControl 300) [ 2.692929] ata9: SATA link down (SStatus 0 SControl 300) [ 2.847125] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.847162] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.848113] ata5.00: ATA-9: WDC WD40EZRZ-00WN9B0, 80.00A80, max UDMA/133 [ 2.848488] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.849399] ata5.00: configured for UDMA/133 [ 2.849723] scsi 4:0:0:0: Direct-Access ATA WDC WD40EZRZ-00W 0A80 PQ: 0 ANSI: 5 [ 2.850030] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.850205] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.850210] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 2.850220] sd 4:0:0:0: [sda] Write Protect is off [ 2.850223] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.850236] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.850252] sd 4:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 2.850434] ata6.00: ATA-9: WDC WD100EMAZ-00WJTA0, 83.H0A83, max UDMA/133 [ 2.854477] ata10.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133 [ 2.857096] ata6.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.857098] ata6.00: Features: NCQ-sndrcv NCQ-prio [ 2.867448] ata6.00: configured for UDMA/133 [ 2.870232] scsi 5:0:0:0: Direct-Access ATA WDC WD100EMAZ-00 0A83 PQ: 0 ANSI: 5 [ 2.870385] sd 5:0:0:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB) [ 2.870386] sd 5:0:0:0: [sdb] 4096-byte physical blocks [ 2.870394] sd 5:0:0:0: [sdb] Write Protect is off [ 2.870397] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.870409] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.870425] sd 5:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.896743] ata10.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.904124] ata10.00: configured for UDMA/133 [ 2.914761] scsi 9:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 2.914966] sd 9:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 2.914972] sd 9:0:0:0: [sdc] Write Protect is off [ 2.914973] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.914980] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.914989] sd 9:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 2.928673] sdc: sdc1 sdc2 [ 2.928767] sd 9:0:0:0: [sdc] Attached SCSI removable disk [ 2.951421] sdb: sdb1 [ 2.951516] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 3.436653] sd 4:0:0:0: [sda] Attached SCSI removable disk [ 3.437663] Freeing unused decrypted memory: 2036K [ 3.437849] Freeing unused kernel image (initmem) memory: 2124K [ 3.437852] Write protecting the kernel read-only data: 28672k [ 3.438125] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 3.438229] Freeing unused kernel image (rodata/data gap) memory: 964K [ 3.466457] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.466460] rodata_test: all tests were successful [ 3.466464] Run /init as init process [ 3.466465] with arguments: [ 3.466466] /init [ 3.466466] with environment: [ 3.466467] HOME=/ [ 3.466467] TERM=linux [ 3.466468] BOOT_IMAGE=/boot/vmlinuz-linux [ 3.489497] fbcon: Taking over console [ 3.489539] Console: switching to colour frame buffer device 128x48 [ 3.556252] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 3.556257] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 1 [ 3.556480] xhci_hcd 0000:06:00.0: hcc params 0x200071e1 hci version 0x100 quirks 0x0000000000000410 [ 3.556858] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 3.556860] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 2 [ 3.556862] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 3.556897] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 3.556900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.556902] usb usb1: Product: xHCI Host Controller [ 3.556903] usb usb1: Manufacturer: Linux 6.0.7-artix1-1 xhci-hcd [ 3.556904] usb usb1: SerialNumber: ... [ 3.556975] hub 1-0:1.0: USB hub found [ 3.556987] hub 1-0:1.0: 4 ports detected [ 3.557095] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.557112] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00 [ 3.557114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.557115] usb usb2: Product: xHCI Host Controller [ 3.557116] usb usb2: Manufacturer: Linux 6.0.7-artix1-1 xhci-hcd [ 3.557117] usb usb2: SerialNumber: ... [ 3.560508] hub 2-0:1.0: USB hub found [ 3.560520] hub 2-0:1.0: 4 ports detected [ 3.560796] xhci_hcd 0000:07:00.1: xHCI Host Controller [ 3.560801] xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 3 [ 3.560975] xhci_hcd 0000:07:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 3.561485] xhci_hcd 0000:07:00.1: xHCI Host Controller [ 3.561488] xhci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 4 [ 3.561490] xhci_hcd 0000:07:00.1: Host supports USB 3.1 Enhanced SuperSpeed [ 3.561520] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 3.561522] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.561523] usb usb3: Product: xHCI Host Controller [ 3.561524] usb usb3: Manufacturer: Linux 6.0.7-artix1-1 xhci-hcd [ 3.561525] usb usb3: SerialNumber: ... [ 3.561686] hub 3-0:1.0: USB hub found [ 3.561697] hub 3-0:1.0: 6 ports detected [ 3.561935] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.561953] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00 [ 3.561955] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.561956] usb usb4: Product: xHCI Host Controller [ 3.561957] usb usb4: Manufacturer: Linux 6.0.7-artix1-1 xhci-hcd [ 3.561958] usb usb4: SerialNumber: ... [ 3.562030] hub 4-0:1.0: USB hub found [ 3.562039] hub 4-0:1.0: 4 ports detected [ 3.562218] xhci_hcd 0000:07:00.3: xHCI Host Controller [ 3.562221] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 5 [ 3.562375] xhci_hcd 0000:07:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 3.562740] xhci_hcd 0000:07:00.3: xHCI Host Controller [ 3.562742] xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 6 [ 3.562743] xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 3.562767] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 3.562769] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.562770] usb usb5: Product: xHCI Host Controller [ 3.562771] usb usb5: Manufacturer: Linux 6.0.7-artix1-1 xhci-hcd [ 3.562771] usb usb5: SerialNumber: ... [ 3.562843] hub 5-0:1.0: USB hub found [ 3.562855] hub 5-0:1.0: 6 ports detected [ 3.563052] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.563064] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00 [ 3.563065] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.563066] usb usb6: Product: xHCI Host Controller [ 3.563067] usb usb6: Manufacturer: Linux 6.0.7-artix1-1 xhci-hcd [ 3.563068] usb usb6: SerialNumber: ... [ 3.563132] hub 6-0:1.0: USB hub found [ 3.563141] hub 6-0:1.0: 4 ports detected [ 3.563182] usb: port power management may be unreliable [ 3.563314] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 3.563317] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 7 [ 3.563420] xhci_hcd 0000:0c:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 3.563695] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 3.563697] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 8 [ 3.563698] xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 3.563720] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 3.563721] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.563722] usb usb7: Product: xHCI Host Controller [ 3.563723] usb usb7: Manufacturer: Linux 6.0.7-artix1-1 xhci-hcd [ 3.563723] usb usb7: SerialNumber: ... [ 3.563790] hub 7-0:1.0: USB hub found [ 3.563796] hub 7-0:1.0: 4 ports detected [ 3.563933] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.563945] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00 [ 3.563947] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.563947] usb usb8: Product: xHCI Host Controller [ 3.563948] usb usb8: Manufacturer: Linux 6.0.7-artix1-1 xhci-hcd [ 3.563949] usb usb8: SerialNumber: ... [ 3.564017] hub 8-0:1.0: USB hub found [ 3.564025] hub 8-0:1.0: 4 ports detected [ 3.569109] nvme nvme0: pci function 0000:01:00.0 [ 3.575695] nvme nvme0: missing or invalid SUBNQN field. [ 3.575710] nvme nvme0: Shutdown timeout set to 8 seconds [ 3.602100] nvme nvme0: 32/0/0 default/read/poll queues [ 3.606243] nvme0n1: p1 [ 3.810007] usb 5-5: new full-speed USB device number 2 using xhci_hcd [ 3.810007] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 3.810013] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 3.813339] usb 7-4: new full-speed USB device number 2 using xhci_hcd [ 3.886199] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Quota mode: none. [ 3.950315] usb 1-2: New USB device found, idVendor=1d5c, idProduct=5011, bcdDevice= 1.00 [ 3.950318] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.950320] usb 1-2: Product: USB2.0 Hub [ 3.950321] usb 1-2: Manufacturer: Fresco Logic, Inc. [ 3.950984] hub 1-2:1.0: USB hub found [ 3.951012] hub 1-2:1.0: 4 ports detected [ 3.975768] usb 5-5: New USB device found, idVendor=8087, idProduct=0aa7, bcdDevice= 0.01 [ 3.975771] usb 5-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.978510] usb 3-2: New USB device found, idVendor=445a, idProduct=1421, bcdDevice= 0.02 [ 3.978513] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.978514] usb 3-2: Product: DZ65RGB [ 3.978515] usb 3-2: Manufacturer: DZTECH [ 3.982726] usb 7-4: New USB device found, idVendor=046d, idProduct=c086, bcdDevice= 7.02 [ 3.982729] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.982730] usb 7-4: Product: Logitech G903 Wired/Wireless Gaming Mouse [ 3.982731] usb 7-4: Manufacturer: Logitech [ 3.982731] usb 7-4: SerialNumber: ... [ 4.073365] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 4.090347] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [ 4.090349] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.090351] usb 2-2: Product: USB3.0 Hub [ 4.090352] usb 2-2: Manufacturer: Fresco Logic, Inc. [ 4.090996] hub 2-2:1.0: USB hub found [ 4.091024] hub 2-2:1.0: 4 ports detected [ 4.103342] usb 5-6: new high-speed USB device number 3 using xhci_hcd [ 4.106678] usb 3-3: new high-speed USB device number 3 using xhci_hcd [ 4.246247] usb 5-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 [ 4.246250] usb 5-6: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 4.246251] usb 5-6: Product: USB2.0 Hub [ 4.249616] usb 3-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 [ 4.249618] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 4.249619] usb 3-3: Product: USB2.0 Hub [ 4.297929] hub 3-3:1.0: USB hub found [ 4.298491] hub 3-3:1.0: 4 ports detected [ 4.299162] hub 5-6:1.0: USB hub found [ 4.299745] hub 5-6:1.0: 4 ports detected [ 4.353477] acpi_cpufreq: overriding BIOS provided _PSD data [ 4.354273] acpi PNP0C14:01: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:00) [ 4.370536] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20220331/utaddress-204) [ 4.370544] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.374235] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 4.378565] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 4.378639] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 4.378795] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 4.380442] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 4.380445] RAPL PMU: hw unit of domain package 2^-16 Joules [ 4.386771] ccp 0000:0c:00.1: enabling device (0000 -> 0002) [ 4.386911] ccp 0000:0c:00.1: ccp: unable to access the device: you might be running a broken BIOS. [ 4.386934] ccp 0000:0c:00.1: psp enabled [ 4.387843] cryptd: max_cpu_qlen set to 1000 [ 4.408702] AVX2 version of gcm_enc/dec engaged. [ 4.408749] AES CTR mode by8 optimization enabled [ 4.423356] usb 3-4: new full-speed USB device number 4 using xhci_hcd [ 4.493875] input: DZTECH DZ65RGB as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.1/usb3/3-2/3-2:1.0/0003:445A:1421.0001/input/input3 [ 4.500214] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Quota mode: none. [ 4.524127] fuse: init (API version 7.36) [ 4.526531] snd_hda_intel 0000:0a:00.1: Disabling MSI [ 4.526549] snd_hda_intel 0000:0a:00.1: Handle vga_switcheroo audio client [ 4.526800] snd_hda_intel 0000:0c:00.4: enabling device (0000 -> 0002) [ 4.550130] hid-generic 0003:445A:1421.0001: input,hidraw0: USB HID v1.11 Keyboard [DZTECH DZ65RGB] on usb-0000:07:00.1-2/input0 [ 4.553688] input: DZTECH DZ65RGB Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.1/usb3/3-2/3-2:1.1/0003:445A:1421.0002/input/input4 [ 4.553715] input: DZTECH DZ65RGB System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.1/usb3/3-2/3-2:1.1/0003:445A:1421.0002/input/input5 [ 4.586510] usb 3-4: New USB device found, idVendor=048d, idProduct=8297, bcdDevice= 0.03 [ 4.586513] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.586514] usb 3-4: Product: ITE Device(8595) [ 4.586515] usb 3-4: Manufacturer: ITE Tech. Inc. [ 4.596624] hid-generic 0003:048D:8297.0003: hiddev96,hidraw1: USB HID v1.10 Device [ITE Tech. Inc. ITE Device(8595)] on usb-0000:07:00.1-4/input0 [ 4.610063] input: DZTECH DZ65RGB Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.1/usb3/3-2/3-2:1.1/0003:445A:1421.0002/input/input6 [ 4.610096] input: DZTECH DZ65RGB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.1/usb3/3-2/3-2:1.1/0003:445A:1421.0002/input/input7 [ 4.610211] hid-generic 0003:445A:1421.0002: input,hidraw2: USB HID v1.11 Mouse [DZTECH DZ65RGB] on usb-0000:07:00.1-2/input1 [ 4.616814] input: Logitech Logitech G903 Wired/Wireless Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb7/7-4/7-4:1.0/0003:046D:C086.0004/input/input8 [ 4.616843] hid-generic 0003:046D:C086.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Logitech G903 Wired/Wireless Gaming Mouse] on usb-0000:0c:00.3-4/input0 [ 4.624889] input: Logitech Logitech G903 Wired/Wireless Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb7/7-4/7-4:1.1/0003:046D:C086.0005/input/input9 [ 4.640014] usb 3-3.3: new full-speed USB device number 5 using xhci_hcd [ 4.648453] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input12 [ 4.663230] snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000 [ 4.663709] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 4.663712] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.663714] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 4.663716] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.663717] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 4.663718] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.663724] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 4.663726] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 4.663727] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 4.665156] SVM: TSC scaling supported [ 4.665158] kvm: Nested Virtualization enabled [ 4.665158] SVM: kvm: Nested Paging enabled [ 4.665159] SEV supported: 509 ASIDs [ 4.665176] SVM: Virtual VMLOAD VMSAVE supported [ 4.665177] SVM: Virtual GIF supported [ 4.665177] SVM: LBR virtualization supported [ 4.674686] MCE: In-kernel MCE decoding enabled. [ 4.680102] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input13 [ 4.680101] hid-generic 0003:046D:C086.0005: input,hiddev97,hidraw4: USB HID v1.11 Keyboard [Logitech Logitech G903 Wired/Wireless Gaming Mouse] on usb-0000:0c:00.3-4/input1 [ 4.680132] usbcore: registered new interface driver usbhid [ 4.680134] usbhid: USB HID core driver [ 4.680141] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input14 [ 4.680172] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input15 [ 4.680200] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input16 [ 4.680232] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input17 [ 4.680259] input: HDA NVidia HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:03.1/0000:0a:00.1/sound/card0/input18 [ 4.714039] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input19 [ 4.714075] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input20 [ 4.714100] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input21 [ 4.714132] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input22 [ 4.714190] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input23 [ 4.714247] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input24 [ 4.714279] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.4/sound/card1/input25 [ 4.756491] usb 3-3.3: New USB device found, idVendor=14ed, idProduct=1012, bcdDevice= 0.02 [ 4.756495] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.756496] usb 3-3.3: Product: Shure MV7 [ 4.756497] usb 3-3.3: Manufacturer: Shure Inc [ 4.836882] input: Logitech Logitech G903 Wired/Wireless Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb7/7-4/7-4:1.0/0003:046D:C086.0004/input/input26 [ 4.836924] logitech-hidpp-device 0003:046D:C086.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Logitech G903 Wired/Wireless Gaming Mouse] on usb-0000:0c:00.3-4/input0 [ 4.846172] nvidia: loading out-of-tree module taints kernel. [ 4.846181] nvidia: module license 'NVIDIA' taints kernel. [ 4.846182] Disabling lock debugging due to kernel taint [ 4.916879] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 4.921732] intel_rapl_common: Found RAPL domain package [ 4.921734] intel_rapl_common: Found RAPL domain core [ 4.929570] hid-generic 0003:14ED:1012.0006: hiddev97,hidraw4: USB HID v1.11 Device [Shure Inc Shure MV7] on usb-0000:07:00.1-3.3/input3 [ 4.940554] input: Shure Inc Shure MV7 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.1/usb3/3-3/3-3.3/3-3.3:1.4/0003:14ED:1012.0007/input/input27 [ 4.976741] logitech-hidpp-device 0003:046D:C086.0005: HID++ 4.2 device connected. [ 4.996713] hid-generic 0003:14ED:1012.0007: input,hidraw5: USB HID v1.11 Device [Shure Inc Shure MV7] on usb-0000:07:00.1-3.3/input4 [ 5.040926] input: Logitech G903 Wired/Wireless Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:0c:00.3/usb7/7-4/7-4:1.1/0003:046D:C086.0005/input/input28 [ 5.096746] logitech-hidpp-device 0003:046D:C086.0005: input,hiddev98,hidraw6: USB HID v1.11 Keyboard [Logitech G903 Wired/Wireless Gaming Mouse] on usb-0000:0c:00.3-4/input1 [ 5.238971] mc: Linux media interface: v0.10 [ 5.240054] dca service started, version 1.12.1 [ 5.240345] mousedev: PS/2 mouse device common for all mice [ 5.240622] nvidia-nvlink: Nvlink Core is being initialized, major device number 236 [ 5.241457] nvidia 0000:0a:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 5.253793] igb: Intel(R) Gigabit Ethernet Network Driver [ 5.253796] igb: Copyright (c) 3B2C-7BF4 Intel Corporation. [ 5.282881] pps pps0: new PPS source ptp0 [ 5.282899] igb 0000:05:00.0: added PHC on eth0 [ 5.282900] igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection [ 5.282901] igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) XXX [ 5.282902] igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF [ 5.282903] igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 5.287142] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 520.56.06 Thu Oct 6 21:38:55 UTC 2022 [ 5.321554] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.321739] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.360128] Bluetooth: Core ver 2.22 [ 5.360147] NET: Registered PF_BLUETOOTH protocol family [ 5.360148] Bluetooth: HCI device and connection manager initialized [ 5.360153] Bluetooth: HCI socket layer initialized [ 5.360154] Bluetooth: L2CAP socket layer initialized [ 5.360157] Bluetooth: SCO socket layer initialized [ 5.374878] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 520.56.06 Thu Oct 6 21:22:53 UTC 2022 [ 5.379778] [drm] [nvidia-drm] [GPU ID 0x00000a00] Loading driver [ 5.379780] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0a:00.0 on minor 0 [ 5.380397] Intel(R) Wireless WiFi driver for Linux [ 5.380433] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002) [ 5.399384] iwlwifi 0000:04:00.0: loaded firmware version 29.198743027.0 3168-29.ucode op_mode iwlmvm [ 5.516692] usbcore: registered new interface driver btusb [ 5.530747] Bluetooth: hci0: Legacy ROM 2.x revision 5.0 build 25 week 20 2015 [ 5.536110] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.f.bseq [ 5.678950] iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220 [ 5.679006] thermal thermal_zone2: failed to read out thermal zone (-61) [ 5.696595] usbcore: registered new interface driver snd-usb-audio [ 5.696642] iwlwifi 0000:04:00.0: base HW address: XXX, OTP minor version: 0x0 [ 5.726131] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.119732] Bluetooth: hci0: Intel BT fw patch 0x43 completed & activated [ 7.865078] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint. [ 7.965084] nvidia-uvm: Loaded the UVM driver, major device number 234. [ 7.972288] i2c_dev: i2c /dev entries driver [ 7.989442] vboxdrv: Found 16 processor cores/threads [ 8.013435] vboxdrv: TSC mode is Invariant, tentative frequency 3593247621 Hz [ 8.013437] vboxdrv: Successfully loaded version 7.0.2 r154219 (interface 0x00330003) [ 8.016559] VBoxNetAdp: Successfully started. [ 8.019983] VBoxNetFlt: Successfully started. [ 8.988857] elogind[1731]: New seat seat0. [ 8.989658] elogind[1731]: Watching system buttons on /dev/input/event1 (Power Button) [ 8.989691] elogind[1731]: Watching system buttons on /dev/input/event0 (Power Button) [ 8.989754] elogind[1731]: Watching system buttons on /dev/input/event3 (DZTECH DZ65RGB) [ 8.989813] elogind[1731]: Watching system buttons on /dev/input/event5 (DZTECH DZ65RGB System Control) [ 8.989875] elogind[1731]: Watching system buttons on /dev/input/event6 (DZTECH DZ65RGB Consumer Control) [ 8.989939] elogind[1731]: Watching system buttons on /dev/input/event7 (DZTECH DZ65RGB Keyboard) [ 8.990365] elogind[1731]: Watching system buttons on /dev/input/event24 (Logitech G903 Wired/Wireless Gaming Mouse) [ 9.430789] zram: Added device: zram0 [ 9.820556] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 9.926906] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.361588] wlan0: authenticate with XXX [ 10.382118] wlan0: send auth to XXX (try 1/3) [ 10.383102] wlan0: authenticated [ 10.420065] wlan0: associate with XXX (try 1/3) [ 10.423284] wlan0: RX AssocResp from XXX (capab=0x911 status=0 aid=1) [ 10.424621] wlan0: associated [ 10.436733] zram0: detected capacity change from 0 to 16408232 [ 10.469908] Adding 8204112k swap on /dev/zram0. Priority:32767 extents:1 across:8204112k SSDscFS [ 11.310185] elogind[1731]: New session c1 of user ... [ 14.349318] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 16.647016] wlan0: deauthenticated from XXX (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [ 761.930731] elogind[1731]: New session 1 of user ... [ 761.968670] elogind[1731]: Removed session c1. [ 764.497554] wlan0: authenticate with XXX [ 764.550843] wlan0: send auth to XXX (try 1/3) [ 764.551841] wlan0: authenticated [ 764.570661] wlan0: associate with XXX (try 1/3) [ 764.571854] wlan0: RX AssocResp from XXX (capab=0x911 status=0 aid=2) [ 764.579277] wlan0: associated [ 765.165031] iwlwifi 0000:04:00.0: No beacon heard and the time event is over already... [ 765.165042] wlan0: Connection to AP XXX lost [ 776.184233] wlan0: authenticate with XXX [ 776.224093] wlan0: send auth to XXX (try 1/3) [ 776.225239] wlan0: authenticated [ 776.250482] wlan0: associate with XXX (try 1/3) [ 776.251743] wlan0: RX AssocResp from XXX (capab=0x911 status=0 aid=2) [ 776.252869] wlan0: associated [ 776.838265] iwlwifi 0000:04:00.0: No beacon heard and the time event is over already... [ 776.838277] wlan0: Connection to AP XXX lost [ 797.037147] wlan0: authenticate with XXX [ 797.080371] wlan0: send auth to XXX (try 1/3) [ 797.081519] wlan0: authenticated [ 797.126838] wlan0: associate with XXX (try 1/3) [ 797.127933] wlan0: RX AssocResp from XXX (capab=0x911 status=0 aid=2) [ 797.136099] wlan0: associated [ 797.694562] iwlwifi 0000:04:00.0: No beacon heard and the time event is over already... [ 797.694575] wlan0: Connection to AP XXX lost [ 818.180335] wlan0: authenticate with XXX [ 818.203445] wlan0: send auth to XXX (try 1/3) [ 818.204581] wlan0: authenticated [ 818.223190] wlan0: associate with XXX (try 1/3) [ 818.224412] wlan0: RX AssocResp from XXX (capab=0x911 status=0 aid=2) [ 818.232565] wlan0: associated [ 818.817613] iwlwifi 0000:04:00.0: No beacon heard and the time event is over already... [ 818.817622] wlan0: Connection to AP XXX lost [ 4874.313069] usb 3-3.1: new high-speed USB device number 6 using xhci_hcd [ 4874.407454] usb 3-3.1: New USB device found, idVendor=18d1, idProduct=4ee7, bcdDevice= 5.10 [ 4874.407457] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4874.407458] usb 3-3.1: Product: Pixel 6 Pro [ 4874.407459] usb 3-3.1: Manufacturer: Google [ 4874.407460] usb 3-3.1: SerialNumber: ... [ 4982.900353] usb 3-3.1: USB disconnect, device number 6 [43121.822913] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [43121.822954] usb 2-2: Failed to suspend device, error -110 [43122.129497] usb 2-2: USB disconnect, device number 2 [43122.129502] usb 2-2: Failed to suspend device, error -19 [43122.389535] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd [43122.409840] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [43122.409845] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [43122.409848] usb 2-2: Product: USB3.0 Hub [43122.409850] usb 2-2: Manufacturer: Fresco Logic, Inc. [43122.410578] hub 2-2:1.0: USB hub found [43122.410600] hub 2-2:1.0: 4 ports detected [45294.403989] usb 2-2: USB disconnect, device number 3 [45299.277297] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [45299.277316] usb 2-2: Failed to suspend device, error -71 [45299.533934] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [45299.550911] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [45299.550916] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [45299.550918] usb 2-2: Product: USB3.0 Hub [45299.550920] usb 2-2: Manufacturer: Fresco Logic, Inc. [45299.551634] hub 2-2:1.0: USB hub found [45299.551656] hub 2-2:1.0: 4 ports detected [50218.872732] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [50218.872759] usb 2-2: Failed to suspend device, error -110 [50219.179353] usb 2-2: USB disconnect, device number 4 [50219.179358] usb 2-2: Failed to suspend device, error -19 [50219.436040] usb 2-2: new SuperSpeed USB device number 5 using xhci_hcd [50219.453017] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [50219.453022] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [50219.453024] usb 2-2: Product: USB3.0 Hub [50219.453026] usb 2-2: Manufacturer: Fresco Logic, Inc. [50219.453744] hub 2-2:1.0: USB hub found [50219.453766] hub 2-2:1.0: 4 ports detected [51275.047235] usb 2-2: USB disconnect, device number 5 [51279.757355] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [51279.757397] usb 2-2: Failed to suspend device, error -71 [51280.017223] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd [51280.037504] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [51280.037509] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [51280.037511] usb 2-2: Product: USB3.0 Hub [51280.037513] usb 2-2: Manufacturer: Fresco Logic, Inc. [51280.038244] hub 2-2:1.0: USB hub found [51280.038267] hub 2-2:1.0: 4 ports detected [51345.842871] usb 2-2: USB disconnect, device number 6 [51350.582612] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [51350.582633] usb 2-2: Failed to suspend device, error -71 [51350.839270] usb 2-2: new SuperSpeed USB device number 7 using xhci_hcd [51350.856248] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [51350.856253] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [51350.856256] usb 2-2: Product: USB3.0 Hub [51350.856258] usb 2-2: Manufacturer: Fresco Logic, Inc. [51350.856960] hub 2-2:1.0: USB hub found [51350.856982] hub 2-2:1.0: 4 ports detected [51621.821242] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [51631.201460] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [51638.294283] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [51714.479980] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [51975.198882] usb 2-2: Failed to suspend device, error -71 [51975.504796] usb 2-2: USB disconnect, device number 7 [51975.761489] usb 2-2: new SuperSpeed USB device number 8 using xhci_hcd [51975.778467] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [51975.778472] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [51975.778474] usb 2-2: Product: USB3.0 Hub [51975.778476] usb 2-2: Manufacturer: Fresco Logic, Inc. [51975.779195] hub 2-2:1.0: USB hub found [51975.779217] hub 2-2:1.0: 4 ports detected [52692.105383] usb 2-2: USB disconnect, device number 8 [52696.905507] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [52696.905529] usb 2-2: Failed to suspend device, error -71 [52697.161990] usb 2-2: new SuperSpeed USB device number 9 using xhci_hcd [52697.178964] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [52697.178969] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [52697.178971] usb 2-2: Product: USB3.0 Hub [52697.178973] usb 2-2: Manufacturer: Fresco Logic, Inc. [52697.179697] hub 2-2:1.0: USB hub found [52697.179719] hub 2-2:1.0: 4 ports detected [53356.020221] usb 2-2: USB disconnect, device number 9 [53360.786860] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [53360.786878] usb 2-2: Failed to suspend device, error -71 [53361.043502] usb 2-2: new SuperSpeed USB device number 10 using xhci_hcd [53361.060472] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [53361.060476] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [53361.060478] usb 2-2: Product: USB3.0 Hub [53361.060480] usb 2-2: Manufacturer: Fresco Logic, Inc. [53361.061199] hub 2-2:1.0: USB hub found [53361.061221] hub 2-2:1.0: 4 ports detected [53543.413565] usb 2-2: USB disconnect, device number 10 [53548.303538] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [53548.303557] usb 2-2: Failed to suspend device, error -71 [53548.560172] usb 2-2: new SuperSpeed USB device number 11 using xhci_hcd [53548.577149] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [53548.577154] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [53548.577156] usb 2-2: Product: USB3.0 Hub [53548.577158] usb 2-2: Manufacturer: Fresco Logic, Inc. [53548.577878] hub 2-2:1.0: USB hub found [53548.577900] hub 2-2:1.0: 4 ports detected [53551.552066] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [53551.853398] usb 2-2: USB disconnect, device number 11 [53551.853592] usb 2-2: Failed to suspend device, error -19 [53552.120088] usb 2-2: new SuperSpeed USB device number 12 using xhci_hcd [53552.137067] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [53552.137072] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [53552.137075] usb 2-2: Product: USB3.0 Hub [53552.137076] usb 2-2: Manufacturer: Fresco Logic, Inc. [53552.137802] hub 2-2:1.0: USB hub found [53552.137824] hub 2-2:1.0: 4 ports detected [53671.254622] usb 2-2: USB disconnect, device number 12 [53676.087930] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [53676.087953] usb 2-2: Failed to suspend device, error -71 [53676.344548] usb 2-2: new SuperSpeed USB device number 13 using xhci_hcd [53676.361530] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [53676.361535] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [53676.361537] usb 2-2: Product: USB3.0 Hub [53676.361539] usb 2-2: Manufacturer: Fresco Logic, Inc. [53676.362248] hub 2-2:1.0: USB hub found [53676.362270] hub 2-2:1.0: 4 ports detected [54078.907251] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [54093.227406] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [54097.956875] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [54395.964250] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [54396.264180] usb 2-2: USB disconnect, device number 13 [54396.264189] usb 2-2: Failed to suspend device, error -19 [54396.520888] usb 2-2: new SuperSpeed USB device number 14 using xhci_hcd [54396.537866] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [54396.537871] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [54396.537873] usb 2-2: Product: USB3.0 Hub [54396.537875] usb 2-2: Manufacturer: Fresco Logic, Inc. [54396.538585] hub 2-2:1.0: USB hub found [54396.538607] hub 2-2:1.0: 4 ports detected [54824.865850] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [54824.865873] usb 2-2: Failed to suspend device, error -110 [54825.172451] usb 2-2: USB disconnect, device number 14 [54825.172474] usb 2-2: Failed to suspend device, error -19 [54825.432474] usb 2-2: new SuperSpeed USB device number 15 using xhci_hcd [54825.452784] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [54825.452789] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [54825.452791] usb 2-2: Product: USB3.0 Hub [54825.452792] usb 2-2: Manufacturer: Fresco Logic, Inc. [54825.453489] hub 2-2:1.0: USB hub found [54825.453508] hub 2-2:1.0: 4 ports detected [55872.715475] usb 2-2: USB disconnect, device number 15 [55873.408844] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [55873.408922] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [55873.668816] usb 2-2: new SuperSpeed USB device number 16 using xhci_hcd [55873.685794] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [55873.685798] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [55873.685800] usb 2-2: Product: USB3.0 Hub [55873.685802] usb 2-2: Manufacturer: Fresco Logic, Inc. [55873.686510] hub 2-2:1.0: USB hub found [55873.686533] hub 2-2:1.0: 4 ports detected [56627.797653] usb 2-2: USB disconnect, device number 16 [56628.511051] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [56628.511132] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [56628.767669] usb 2-2: new SuperSpeed USB device number 17 using xhci_hcd [56628.784660] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [56628.784665] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [56628.784667] usb 2-2: Product: USB3.0 Hub [56628.784669] usb 2-2: Manufacturer: Fresco Logic, Inc. [56628.785386] hub 2-2:1.0: USB hub found [56628.785408] hub 2-2:1.0: 4 ports detected [56796.585103] usb 2-2: Failed to suspend device, error -71 [56796.897763] usb 2-2: USB disconnect, device number 17 [56797.157787] usb 2-2: new SuperSpeed USB device number 18 using xhci_hcd [56797.174769] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [56797.174774] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [56797.174776] usb 2-2: Product: USB3.0 Hub [56797.174778] usb 2-2: Manufacturer: Fresco Logic, Inc. [56797.175501] hub 2-2:1.0: USB hub found [56797.175524] hub 2-2:1.0: 4 ports detected [57878.837213] usb 2-2: USB disconnect, device number 18 [57883.580499] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [57883.580521] usb 2-2: Failed to suspend device, error -71 [57883.837157] usb 2-2: new SuperSpeed USB device number 19 using xhci_hcd [57883.854133] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [57883.854136] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [57883.854138] usb 2-2: Product: USB3.0 Hub [57883.854139] usb 2-2: Manufacturer: Fresco Logic, Inc. [57883.854819] hub 2-2:1.0: USB hub found [57883.854840] hub 2-2:1.0: 4 ports detected [59157.583185] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [59157.583216] usb 2-2: Failed to suspend device, error -110 [59157.886743] usb 2-2: USB disconnect, device number 19 [59157.886767] usb 2-2: Failed to suspend device, error -19 [59158.149830] usb 2-2: new SuperSpeed USB device number 20 using xhci_hcd [59158.166809] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [59158.166814] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [59158.166817] usb 2-2: Product: USB3.0 Hub [59158.166819] usb 2-2: Manufacturer: Fresco Logic, Inc. [59158.167549] hub 2-2:1.0: USB hub found [59158.167572] hub 2-2:1.0: 4 ports detected [60486.411681] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [60486.411722] usb 2-2: Failed to suspend device, error -110 [60486.714952] usb 2-2: USB disconnect, device number 20 [60486.714975] usb 2-2: Failed to suspend device, error -19 [60486.971628] usb 2-2: new SuperSpeed USB device number 21 using xhci_hcd [60486.988601] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [60486.988605] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [60486.988607] usb 2-2: Product: USB3.0 Hub [60486.988609] usb 2-2: Manufacturer: Fresco Logic, Inc. [60486.989336] hub 2-2:1.0: USB hub found [60486.989358] hub 2-2:1.0: 4 ports detected [62695.820541] usb 2-2: USB disconnect, device number 21 [62700.560498] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [62700.560512] usb 2-2: Failed to suspend device, error -71 [62700.823833] usb 2-2: new SuperSpeed USB device number 22 using xhci_hcd [62700.840782] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [62700.840787] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [62700.840789] usb 2-2: Product: USB3.0 Hub [62700.840792] usb 2-2: Manufacturer: Fresco Logic, Inc. [62700.841585] hub 2-2:1.0: USB hub found [62700.841609] hub 2-2:1.0: 4 ports detected [63185.881513] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [63185.881538] usb 2-2: Failed to suspend device, error -110 [63186.188125] usb 2-2: USB disconnect, device number 22 [63186.188129] usb 2-2: Failed to suspend device, error -19 [63186.448150] usb 2-2: new SuperSpeed USB device number 23 using xhci_hcd [63186.465125] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [63186.465130] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [63186.465133] usb 2-2: Product: USB3.0 Hub [63186.465135] usb 2-2: Manufacturer: Fresco Logic, Inc. [63186.465893] hub 2-2:1.0: USB hub found [63186.465913] hub 2-2:1.0: 4 ports detected [63521.094633] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [63521.401917] usb 2-2: USB disconnect, device number 23 [63521.401923] usb 2-2: Failed to suspend device, error -19 [63521.658612] usb 2-2: new SuperSpeed USB device number 24 using xhci_hcd [63521.675587] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [63521.675592] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [63521.675594] usb 2-2: Product: USB3.0 Hub [63521.675596] usb 2-2: Manufacturer: Fresco Logic, Inc. [63521.676325] hub 2-2:1.0: USB hub found [63521.676347] hub 2-2:1.0: 4 ports detected [63589.717321] usb 2-2: USB disconnect, device number 24 [63594.620587] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [63594.620609] usb 2-2: Failed to suspend device, error -71 [63594.877261] usb 2-2: new SuperSpeed USB device number 25 using xhci_hcd [63594.894229] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [63594.894234] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [63594.894237] usb 2-2: Product: USB3.0 Hub [63594.894239] usb 2-2: Manufacturer: Fresco Logic, Inc. [63594.894973] hub 2-2:1.0: USB hub found [63594.894996] hub 2-2:1.0: 4 ports detected [64078.451637] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [64078.451658] usb 2-2: Failed to suspend device, error -110 [64078.758283] usb 2-2: USB disconnect, device number 25 [64078.758290] usb 2-2: Failed to suspend device, error -19 [64079.014969] usb 2-2: new SuperSpeed USB device number 26 using xhci_hcd [64079.035276] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [64079.035281] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [64079.035284] usb 2-2: Product: USB3.0 Hub [64079.035286] usb 2-2: Manufacturer: Fresco Logic, Inc. [64079.036012] hub 2-2:1.0: USB hub found [64079.036034] hub 2-2:1.0: 4 ports detected [65110.965933] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [65110.965955] usb 2-2: Failed to suspend device, error -110 [65111.275874] usb 2-2: USB disconnect, device number 26 [65111.275880] usb 2-2: Failed to suspend device, error -19 [65111.532565] usb 2-2: new SuperSpeed USB device number 27 using xhci_hcd [65111.552876] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [65111.552881] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [65111.552884] usb 2-2: Product: USB3.0 Hub [65111.552886] usb 2-2: Manufacturer: Fresco Logic, Inc. [65111.553674] hub 2-2:1.0: USB hub found [65111.553696] hub 2-2:1.0: 4 ports detected [66055.161850] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [66055.161875] usb 2-2: Failed to suspend device, error -110 [66055.471787] usb 2-2: USB disconnect, device number 27 [66055.471793] usb 2-2: Failed to suspend device, error -19 [66055.731813] usb 2-2: new SuperSpeed USB device number 28 using xhci_hcd [66055.748785] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [66055.748789] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [66055.748790] usb 2-2: Product: USB3.0 Hub [66055.748791] usb 2-2: Manufacturer: Fresco Logic, Inc. [66055.749475] hub 2-2:1.0: USB hub found [66055.749493] hub 2-2:1.0: 4 ports detected [67714.701220] usb 2-2: USB disconnect, device number 28 [67719.557856] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [67719.557877] usb 2-2: Failed to suspend device, error -71 [67719.814491] usb 2-2: new SuperSpeed USB device number 29 using xhci_hcd [67719.831465] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [67719.831470] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [67719.831473] usb 2-2: Product: USB3.0 Hub [67719.831475] usb 2-2: Manufacturer: Fresco Logic, Inc. [67719.832199] hub 2-2:1.0: USB hub found [67719.832223] hub 2-2:1.0: 4 ports detected [68784.498254] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [68784.498281] usb 2-2: Failed to suspend device, error -110 [68784.498317] usb 2-2: Failed to suspend device, error -19 [68784.808189] usb 2-2: USB disconnect, device number 29 [68785.064886] usb 2-2: new SuperSpeed USB device number 30 using xhci_hcd [68785.081858] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [68785.081862] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [68785.081865] usb 2-2: Product: USB3.0 Hub [68785.081867] usb 2-2: Manufacturer: Fresco Logic, Inc. [68785.082587] hub 2-2:1.0: USB hub found [68785.082609] hub 2-2:1.0: 4 ports detected [68866.324105] usb 2-2: Failed to suspend device, error -19 [68866.630013] usb 2-2: USB disconnect, device number 30 [68866.890044] usb 2-2: new SuperSpeed USB device number 31 using xhci_hcd [68866.907016] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [68866.907020] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [68866.907023] usb 2-2: Product: USB3.0 Hub [68866.907024] usb 2-2: Manufacturer: Fresco Logic, Inc. [68866.907752] hub 2-2:1.0: USB hub found [68866.907774] hub 2-2:1.0: 4 ports detected [69140.051654] usb 2-2: USB disconnect, device number 31 [69144.811616] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [69144.811638] usb 2-2: Failed to suspend device, error -71 [69145.068261] usb 2-2: new SuperSpeed USB device number 32 using xhci_hcd [69145.085237] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [69145.085243] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [69145.085246] usb 2-2: Product: USB3.0 Hub [69145.085247] usb 2-2: Manufacturer: Fresco Logic, Inc. [69145.085965] hub 2-2:1.0: USB hub found [69145.085988] hub 2-2:1.0: 4 ports detected [71029.036984] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [71029.340241] usb 2-2: USB disconnect, device number 32 [71029.340252] usb 2-2: Failed to suspend device, error -19 [71029.600270] usb 2-2: new SuperSpeed USB device number 33 using xhci_hcd [71029.617246] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [71029.617252] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [71029.617255] usb 2-2: Product: USB3.0 Hub [71029.617257] usb 2-2: Manufacturer: Fresco Logic, Inc. [71029.617990] hub 2-2:1.0: USB hub found [71029.618012] hub 2-2:1.0: 4 ports detected [72604.801329] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [72604.801350] usb 2-2: Failed to suspend device, error -110 [72605.107949] usb 2-2: USB disconnect, device number 33 [72605.107955] usb 2-2: Failed to suspend device, error -19 [72605.371304] usb 2-2: new SuperSpeed USB device number 34 using xhci_hcd [72605.388279] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [72605.388284] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [72605.388287] usb 2-2: Product: USB3.0 Hub [72605.388289] usb 2-2: Manufacturer: Fresco Logic, Inc. [72605.389007] hub 2-2:1.0: USB hub found [72605.389029] hub 2-2:1.0: 4 ports detected [74006.878852] usb 2-2: USB disconnect, device number 34 [74011.708815] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [74011.708833] usb 2-2: Failed to suspend device, error -71 [74011.972121] usb 2-2: new SuperSpeed USB device number 35 using xhci_hcd [74011.989096] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [74011.989102] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [74011.989104] usb 2-2: Product: USB3.0 Hub [74011.989106] usb 2-2: Manufacturer: Fresco Logic, Inc. [74011.989835] hub 2-2:1.0: USB hub found [74011.989857] hub 2-2:1.0: 4 ports detected [74165.305988] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [74165.306011] usb 2-2: Failed to suspend device, error -110 [74165.609261] usb 2-2: USB disconnect, device number 35 [74165.609267] usb 2-2: Failed to suspend device, error -19 [74165.869291] usb 2-2: new SuperSpeed USB device number 36 using xhci_hcd [74165.886268] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [74165.886273] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [74165.886275] usb 2-2: Product: USB3.0 Hub [74165.886277] usb 2-2: Manufacturer: Fresco Logic, Inc. [74165.886995] hub 2-2:1.0: USB hub found [74165.887018] hub 2-2:1.0: 4 ports detected [75019.150248] usb 2-2: USB disconnect, device number 36 [75023.956851] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [75023.956874] usb 2-2: Failed to suspend device, error -71 [75024.223531] usb 2-2: new SuperSpeed USB device number 37 using xhci_hcd [75024.240495] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [75024.240500] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [75024.240503] usb 2-2: Product: USB3.0 Hub [75024.240505] usb 2-2: Manufacturer: Fresco Logic, Inc. [75024.241229] hub 2-2:1.0: USB hub found [75024.241252] hub 2-2:1.0: 4 ports detected [75305.765007] xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. [75305.765032] usb 2-2: Failed to suspend device, error -110 [75306.081642] usb 2-2: USB disconnect, device number 37 [75306.081652] usb 2-2: Failed to suspend device, error -19 [75306.338339] usb 2-2: new SuperSpeed USB device number 38 using xhci_hcd [75306.355313] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00 [75306.355318] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [75306.355320] usb 2-2: Product: USB3.0 Hub [75306.355322] usb 2-2: Manufacturer: Fresco Logic, Inc. [75306.356058] hub 2-2:1.0: USB hub found [75306.356083] hub 2-2:1.0: 4 ports detected [75996.879519] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [76003.725651] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [76110.054121] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [76136.133216] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [76139.333563] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [76225.821572] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [76229.005246] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [76255.124366] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [76258.321383] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [76501.666503] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Down [76504.970170] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [78011.484271] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [78011.494461] sd 4:0:0:0: Attached scsi generic sg0 type 0 [78011.494499] sd 5:0:0:0: Attached scsi generic sg1 type 0 [78011.494527] sd 9:0:0:0: Attached scsi generic sg2 type 0