Probe #08b959d9ec of Gigabyte H55M-USB3 Desktop Computer
Log: dmesg.1
[ 1.165766] i2c_dev: i2c /dev entries driver
[ 1.373239] tsc: Refined TSC clocksource calibration: 2799.974 MHz
[ 1.373249] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c289fcb0, max_idle_ns: 440795348079 ns
[ 1.373270] clocksource: Switched to clocksource tsc
[ 1.413806] device-mapper: uevent: version 1.0.3
[ 1.413885] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX
[ 1.438468] xor: measuring software checksum speed
[ 1.439610] prefetch64-sse : 8698 MB/sec
[ 1.440981] generic_sse : 7246 MB/sec
[ 1.440983] xor: using function: prefetch64-sse (8698 MB/sec)
[ 1.462241] raid6: sse2x4 gen() 3561 MB/s
[ 1.479238] raid6: sse2x2 gen() 4174 MB/s
[ 1.496237] raid6: sse2x1 gen() 3812 MB/s
[ 1.496239] raid6: using algorithm sse2x2 gen() 4174 MB/s
[ 1.513240] raid6: .... xor() 3100 MB/s, rmw enabled
[ 1.513242] raid6: using ssse3x2 recovery algorithm
[ 1.719429] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=no
[ 1.753778] ACPI: bus type USB registered
[ 1.753809] usbcore: registered new interface driver usbfs
[ 1.753821] usbcore: registered new interface driver hub
[ 1.753840] usbcore: registered new device driver usb
[ 1.759324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.266014] ehci-pci: EHCI PCI platform driver
[ 2.266727] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 2.266735] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.266748] ehci-pci 0000:00:1a.7: debug port 2
[ 2.271982] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
[ 2.277755] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.277797] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.280024] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.280286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 2.280290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.280293] usb usb1: Product: EHCI Host Controller
[ 2.280296] usb usb1: Manufacturer: Linux 5.19.5-desktop-1omv4090 ehci_hcd
[ 2.280298] usb usb1: SerialNumber: ...
[ 2.283478] hub 1-0:1.0: USB hub found
[ 2.283490] hub 1-0:1.0: 6 ports detected
[ 2.283969] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.284053] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.284066] ehci-pci 0000:00:1d.7: debug port 2
[ 2.289399] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
[ 2.291804] ACPI: button: Power Button [PWRF] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.300419] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 2.300424] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.300427] usb usb2: Product: EHCI Host Controller
[ 2.300429] usb usb2: Manufacturer: Linux 5.19.5-desktop-1omv4090 ehci_hcd
[ 2.300431] usb usb2: SerialNumber: ...
[ 2.325094] Linux agpgart interface v0.103
[ 2.328512] hub 2-0:1.0: USB hub found
[ 2.328526] hub 2-0:1.0: 6 ports detected
[ 2.333171] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.360499] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.360512] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.360552] uhci_hcd 0000:00:1a.0: irq 16, io port 0x0000ff00
[ 2.361058] SCSI subsystem initialized
[ 2.363269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 2.363274] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.363277] usb usb3: Product: UHCI Host Controller
[ 2.363280] usb usb3: Manufacturer: Linux 5.19.5-desktop-1omv4090 uhci_hcd
[ 2.363282] usb usb3: SerialNumber: ...
[ 2.363761] hub 3-0:1.0: USB hub found
[ 2.363772] hub 3-0:1.0: 2 ports detected
[ 2.364094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.364101] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.364134] uhci_hcd 0000:00:1a.1: irq 21, io port 0x0000fe00
[ 2.365804] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 2.365809] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.365812] usb usb4: Product: UHCI Host Controller
[ 2.365814] usb usb4: Manufacturer: Linux 5.19.5-desktop-1omv4090 uhci_hcd
[ 2.365817] usb usb4: SerialNumber: ...
[ 2.366957] hub 4-0:1.0: USB hub found
[ 2.366968] hub 4-0:1.0: 2 ports detected
[ 2.368750] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.368757] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.368782] uhci_hcd 0000:00:1a.2: irq 18, io port 0x0000fd00
[ 2.370512] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 2.370517] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.370520] usb usb5: Product: UHCI Host Controller
[ 2.370522] usb usb5: Manufacturer: Linux 5.19.5-desktop-1omv4090 uhci_hcd
[ 2.370525] usb usb5: SerialNumber: ...
[ 2.372455] hub 5-0:1.0: USB hub found
[ 2.372764] hub 5-0:1.0: 2 ports detected
[ 2.372954] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.372962] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[ 2.373082] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 2.373731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.373739] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 7
[ 2.373764] uhci_hcd 0000:00:1d.0: irq 23, io port 0x0000fc00
[ 2.374762] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 2.374767] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.374770] usb usb7: Product: UHCI Host Controller
[ 2.374772] usb usb7: Manufacturer: Linux 5.19.5-desktop-1omv4090 uhci_hcd
[ 2.374775] usb usb7: SerialNumber: ...
[ 2.384555] hub 7-0:1.0: USB hub found
[ 2.384569] hub 7-0:1.0: 2 ports detected
[ 2.384932] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.384939] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 8
[ 2.384973] uhci_hcd 0000:00:1d.1: irq 19, io port 0x0000fb00
[ 2.385032] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 2.385036] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.385039] usb usb8: Product: UHCI Host Controller
[ 2.385042] usb usb8: Manufacturer: Linux 5.19.5-desktop-1omv4090 uhci_hcd
[ 2.385044] usb usb8: SerialNumber: ...
[ 2.385436] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.387696] hub 8-0:1.0: USB hub found
[ 2.387706] hub 8-0:1.0: 2 ports detected
[ 2.388552] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[ 2.388559] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed
[ 2.388623] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 2.388627] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.388630] usb usb6: Product: xHCI Host Controller
[ 2.388632] usb usb6: Manufacturer: Linux 5.19.5-desktop-1omv4090 xhci-hcd
[ 2.388634] usb usb6: SerialNumber: ...
[ 2.390680] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.390856] hub 6-0:1.0: USB hub found
[ 2.390872] hub 6-0:1.0: 2 ports detected
[ 2.391032] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.391068] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[ 2.391072] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.391075] usb usb9: Product: xHCI Host Controller
[ 2.391077] usb usb9: Manufacturer: Linux 5.19.5-desktop-1omv4090 xhci-hcd
[ 2.391079] usb usb9: SerialNumber: ...
[ 2.392063] hub 9-0:1.0: USB hub found
[ 2.392079] hub 9-0:1.0: 2 ports detected
[ 2.394516] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 2.394542] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000fa00
[ 2.394608] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 2.394612] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 2.394615] usb usb10: Product: UHCI Host Controller
[ 2.394617] usb usb10: Manufacturer: Linux 5.19.5-desktop-1omv4090 uhci_hcd
[ 2.394620] usb usb10: SerialNumber: ...
[ 2.395164] hub 10-0:1.0: USB hub found
[ 2.395174] hub 10-0:1.0: 2 ports detected
[ 2.428327] firewire_ohci 0000:05:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.449219] ACPI: bus type drm_connector registered
[ 2.456457] libata version 3.00 loaded.
[ 2.461473] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 2.470268] scsi host0: pata_jmicron
[ 2.470565] scsi host1: pata_jmicron
[ 2.470623] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
[ 2.470627] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
[ 2.471042] ahci 0000:00:1f.2: version 3.0
[ 2.471323] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.481419] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.481425] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
[ 2.496802] scsi host2: ahci
[ 2.496971] scsi host3: ahci
[ 2.497117] scsi host4: ahci
[ 2.497295] scsi host5: ahci
[ 2.497461] scsi host6: ahci
[ 2.497645] scsi host7: ahci
[ 2.497728] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 39
[ 2.497731] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 39
[ 2.497734] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 39
[ 2.497737] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 39
[ 2.497739] ata7: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 39
[ 2.497742] ata8: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 39
[ 2.507959] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.507966] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.508291] scsi host8: ahci
[ 2.508460] scsi host9: ahci
[ 2.508656] ata9: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 16
[ 2.508660] ata10: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 16
[ 2.567246] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.631141] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H20L, 1.02, max UDMA/33
[ 2.639172] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H20L 1.02 PQ: 0 ANSI: 5
[ 2.696149] usb 2-2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[ 2.696154] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2.696157] usb 2-2: Product: 802.11n NIC
[ 2.696160] usb 2-2: Manufacturer: Realtek
[ 2.696162] usb 2-2: SerialNumber: ...
[ 2.706240] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.817436] ata9: SATA link down (SStatus 0 SControl 300)
[ 2.817469] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.879822] usb 5-1: New USB device found, idVendor=1c4f, idProduct=0048, bcdDevice= 1.10
[ 2.879827] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2.879831] usb 5-1: Product: Usb Mouse
[ 2.879833] usb 5-1: Manufacturer: SIGMACHIP
[ 2.895173] hid: raw HID events driver (C) Jiri Kosina
[ 2.932305] firewire_core 0000:05:07.0: created device fw0: GUID 00175da8001c6f65, S400
[ 2.956250] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.968411] ata3.00: HPA detected: current 234439535, native 234441648
[ 2.968416] ata3.00: ATA-8: KINGSTON SV300S37A120G, 580ABBF0, max UDMA/133
[ 3.008969] ata3.00: 234439535 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 3.018096] ata3.00: configured for UDMA/133
[ 3.018194] scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 3.296306] random: crng init done
[ 3.484257] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.487094] ata4.00: HPA detected: current 156299375, native 156301488
[ 3.487098] ata4.00: ATA-7: SAMSUNG HD080HJ, ZH100-47, max UDMA7
[ 3.487161] ata4.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 3.515331] ata4.00: configured for UDMA/133
[ 3.515420] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD080HJ 0-47 PQ: 0 ANSI: 5
[ 3.554243] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 3.812819] usb 5-2: New USB device found, idVendor=05af, idProduct=0802, bcdDevice= 1.30
[ 3.812823] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 3.812826] usb 5-2: Product: USB Keyboard
[ 3.812829] usb 5-2: Manufacturer:
[ 3.826309] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.956937] usbcore: registered new interface driver usbhid
[ 3.956940] usbhid: USB HID core driver
[ 4.137422] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.441451] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.745444] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.758061] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:1C4F:0048.0001/input/input3
[ 4.758179] hid-generic 0003:1C4F:0048.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:1a.2-1/input0
[ 4.758760] input: USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:05AF:0802.0002/input/input4
[ 4.798923] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.798930] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.810354] hid-generic 0003:05AF:0802.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.2-2/input0
[ 4.810562] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:05AF:0802.0003/input/input5
[ 4.818558] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.818727] sd 2:0:0:0: [sda] 234439535 512-byte logical blocks: (120 GB/112 GiB)
[ 4.818742] sd 2:0:0:0: [sda] Write Protect is off
[ 4.818745] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.818764] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.818791] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 4.819063] sd 3:0:0:0: [sdb] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 4.819076] sd 3:0:0:0: [sdb] Write Protect is off
[ 4.819079] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.819099] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.819168] sd 3:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 4.835845] sda: sda1 sda2
[ 4.835990] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.842269] sdb: sdb1
[ 4.842346] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 4.863352] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:05AF:0802.0003/input/input6
[ 4.863435] hid-generic 0003:05AF:0802.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1a.2-2/input1
[ 5.233433] nouveau 0000:01:00.0: vgaarb: deactivate vga console
[ 5.234468] Console: switching to colour dummy device 80x25
[ 5.234742] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[ 5.359318] nouveau 0000:01:00.0: bios: version 70.18.5f.00.06
[ 5.362221] nouveau 0000:01:00.0: fb: 512 MiB DDR3
[ 5.362237] nouveau 0000:01:00.0: fb: memory controller reports 512 MiB VRAM
[ 6.067397] nouveau 0000:01:00.0: DRM: VRAM: 512 MiB
[ 6.067402] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 6.067407] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 6.067409] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 6.067413] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[ 6.067416] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[ 6.067419] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[ 6.067422] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[ 6.067426] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 6.067428] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[ 6.067431] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[ 6.070666] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 6.113828] nouveau 0000:01:00.0: DRM: allocated 1366x768 fb: 0x70000, bo 000000003ac24489
[ 6.113913] fbcon: nouveaudrmfb (fb0) is primary device
[ 6.155966] Console: switching to colour frame buffer device 170x48
[ 6.156717] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 6.164212] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 6.345538] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[ 7.653540] zram0: detected capacity change from 0 to 8102912
[ 7.719061] Adding 4051452k swap on /dev/zram0. Priority:100 extents:1 across:4051452k SSDscFS
[ 7.888746] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20220331/utaddress-204)
[ 7.888757] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 7.889437] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.911878] EDAC MC: Ver: 3.0.0
[ 7.912437] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 7.916917] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.947162] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
[ 7.947221] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 7.947269] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 7.947397] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[ 7.948909] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 7.958016] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 7.958035] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 7.989171] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input7
[ 7.989302] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input8
[ 7.989667] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input9
[ 7.989739] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input10
[ 7.991012] EEPROM ID = 0x8129
[ 7.992918] r8169 0000:03:00.0 eth0: RTL8168e/8111e, B5A584FB78E13DE7CC75988D814F2308, XID 2c2, IRQ 41
[ 7.992926] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] usbcore: registered new interface driver r8188eu
[ 8.066652] iTCO_vendor_support: vendor-support=0
[ 8.066989] gpio_ich gpio_ich.2.auto: GPIO from 948 to 1023
[ 8.068076] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.068082] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.068086] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.068089] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 8.068091] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
[ 8.068094] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 8.068097] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 8.068099] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 8.068102] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 8.068104] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
[ 8.080642] iTCO_wdt iTCO_wdt.1.auto: Found a H55 TCO device (Version=2, TCOBASE=0x0460)
[ 8.081573] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 8.093356] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.093575] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.093637] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.093696] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.093770] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 8.093831] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 8.093892] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 8.093950] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 8.097896] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 8.101355] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 8.106809] r8188eu 2-2:1.0 wlp0s29f7u2: renamed from wlan0
[ 9.505195] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.508405] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.676432] RTL8211DN Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 9.928884] r8169 0000:03:00.0 enp3s0: Link is Down
[ 9.937467] R8188EU: Firmware Version 11, SubVersion 1, Signature 0x88e1
[ 10.308755] MAC Address = 02990A9DC1407FF167241B29343D2E60
[ 10.454853] NET: Registered PF_PACKET protocol family
[ 13.070563] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084 failed with error -2
[ 13.070596] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084d failed with error -2
[ 13.070600] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 13.070603] nouveau 0000:01:00.0: msvld: init failed, -19
[ 14.358345] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u2: link becomes ready
[ 434.658019] Non-volatile memory driver v1.3
[ 434.835206] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 435.032354] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 435.032412] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 435.032473] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 437.349271] r8169 0000:03:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM
[ 439.505081] Bluetooth: Core ver 2.22
[ 439.505105] NET: Registered PF_BLUETOOTH protocol family
[ 439.505106] Bluetooth: HCI device and connection manager initialized
[ 439.505110] Bluetooth: HCI socket layer initialized
[ 439.505112] Bluetooth: L2CAP socket layer initialized
[ 439.505118] Bluetooth: SCO socket layer initialized
[ 441.238752] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084 failed with error -2
[ 441.238770] nouveau 0000:01:00.0: Direct firmware load for nouveau/nva8_fuc084d failed with error -2
[ 441.238772] nouveau 0000:01:00.0: msvld: unable to load firmware data
[ 441.238773] nouveau 0000:01:00.0: msvld: init failed, -19
[ 2013.254280] zram0: detected capacity change from 8102912 to 0