Probe #1155ca8c5c of ASUSTek UX410UAK

Log: dmesg.1

[ 0.000000] microcode: updated early: 0x38 -> 0xf4, date = 2023-02-22 [ 0.000000] Linux version 6.5.0-14-generic (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #14~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Mon Nov 20 18:15:30 UTC 2 (Ubuntu 6.5.0-14.14~22.04.1-generic 6.5.3) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-14-generic root=UUID=HASH_719-F0E9-4A4C-3BDD-A155E5E32291 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094a61fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000094a62000-0x0000000094a62fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000094a63000-0x0000000094a63fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000094a64000-0x0000000099886fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000099887000-0x000000009a5b1fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009a5b2000-0x000000009a5f4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009a5f5000-0x000000009adb0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009adb1000-0x000000009b27efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009b27f000-0x000000009b2fefff] usable [ 0.000000] BIOS-e820: [mem 0x000000009b2ff000-0x000000009fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x8bab0018-0x8bac0057] usable ==> usable [ 0.000000] e820: update [mem 0x8bab0018-0x8bac0057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000008bab0017] usable [ 0.000000] reserve setup_data: [mem 0x000000008bab0018-0x000000008bac0057] usable [ 0.000000] reserve setup_data: [mem 0x000000008bac0058-0x0000000094a61fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000094a62000-0x0000000094a62fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000094a63000-0x0000000094a63fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000094a64000-0x0000000099886fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000099887000-0x000000009a5b1fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009a5b2000-0x000000009a5f4fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000009a5f5000-0x000000009adb0fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009adb1000-0x000000009b27efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009b27f000-0x000000009b2fefff] usable [ 0.000000] reserve setup_data: [mem 0x000000009b2ff000-0x000000009fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045effffff] usable [ 0.000000] efi: EFI v2.5 by American Megatrends [ 0.000000] efi: TPMFinalLog=0x9ad99000 ACPI=0x9a5bf000 ACPI 2.0=0x9a5bf000 SMBIOS=0x9b170000 SMBIOS 3.0=0x9b16f000 ESRT=0x98572f18 MOKvar=0x9af00000 TPMEventLog=0x8bac1018 [ 0.000000] efi: Remove mem40: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map [ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved [ 0.000000] efi: Not removing mem41: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem42: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem43: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem44: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX410UAK/UX410UAK, BIOS UX410UAK.300 10/05/2016 [ 0.000000] tsc: Detected 2900.000 MHz processor [ 0.000000] tsc: Detected 2899.886 MHz TSC [ 0.001044] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001048] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001059] last_pfn = 0x45f000 max_arch_pfn = 0x400000000 [ 0.001063] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs [ 0.001066] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001703] last_pfn = 0x9b2ff max_arch_pfn = 0x400000000 [ 0.017242] esrt: Reserving ESRT space from 0x0000000098572f18 to 0x0000000098572f50. [ 0.017247] e820: update [mem 0x98572000-0x98572fff] usable ==> reserved [ 0.017267] Using GB pages for direct mapping [ 0.018231] secureboot: Secure boot enabled [ 0.018232] RAMDISK: [mem 0x8bac9000-0x93246fff] ACPI: Early table checksum verification disabled [ 0.018242] ACPI: RSDP 0x000000009A5BF000 000024 (v02 _ASUS_) [ 0.018247] ACPI: XSDT 0x000000009A5BF0A8 0000D4 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.018253] ACPI: FACP 0x000000009A5E9838 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.018259] ACPI: DSDT 0x000000009A5BF210 02A621 (v02 _ASUS_ Notebook 01072009 INTL 20160422) [ 0.018263] ACPI: FACS 0x000000009AD97C40 000040 [ 0.018266] ACPI: APIC 0x000000009A5E9950 000084 (v03 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.018269] ACPI: FPDT 0x000000009A5E99D8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.018273] ACPI: ECDT 0x000000009A5E9A20 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005) [ 0.018276] ACPI: MCFG 0x000000009A5E9AE8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097) [ 0.018280] ACPI: FIDT 0x000000009A5E9B28 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.018283] ACPI: SSDT 0x000000009A5E9BC8 005D58 (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.018288] ACPI: MSDM 0x000000009A5EF920 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001) [ 0.018291] ACPI: SSDT 0x000000009A5EF978 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.018295] ACPI: HPET 0x000000009A5F2AD0 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.018298] ACPI: UEFI 0x000000009A5F2B08 000042 (v01 INTEL EDK2 00000002 01000013) [ 0.018303] ACPI: SSDT 0x000000009A5F2B50 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.018307] ACPI: SSDT 0x000000009A5F3A30 0003E3 (v02 PmRef Cpu0Tst 00003000 INTL 20160422) [ 0.018310] ACPI: SSDT 0x000000009A5F3E18 000471 (v02 PmRef ApTst 00003000 INTL 20160422) [ 0.018314] ACPI: LPIT 0x000000009A5F4290 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.018317] ACPI: WSMT 0x000000009A5F4328 000028 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.018320] ACPI: SSDT 0x000000009A5F4350 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.018324] ACPI: DBGP 0x000000009A5F45F0 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.018327] ACPI: DBG2 0x000000009A5F4628 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.018331] ACPI: BGRT 0x000000009A5F4680 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013) [ 0.018334] ACPI: DMAR 0x000000009A5F46B8 0000F0 (v01 INTEL KBL 00000001 INTL 00000001) [ 0.018337] ACPI: TPM2 0x000000009A5F47A8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) [ 0.018340] ACPI: Reserving FACP table memory at [mem 0x9a5e9838-0x9a5e994b] ACPI: Reserving DSDT table memory at [mem 0x9a5bf210-0x9a5e9830] ACPI: Reserving FACS table memory at [mem 0x9ad97c40-0x9ad97c7f] ACPI: Reserving APIC table memory at [mem 0x9a5e9950-0x9a5e99d3] ACPI: Reserving FPDT table memory at [mem 0x9a5e99d8-0x9a5e9a1b] ACPI: Reserving ECDT table memory at [mem 0x9a5e9a20-0x9a5e9ae0] ACPI: Reserving MCFG table memory at [mem 0x9a5e9ae8-0x9a5e9b23] ACPI: Reserving FIDT table memory at [mem 0x9a5e9b28-0x9a5e9bc3] ACPI: Reserving SSDT table memory at [mem 0x9a5e9bc8-0x9a5ef91f] ACPI: Reserving MSDM table memory at [mem 0x9a5ef920-0x9a5ef974] ACPI: Reserving SSDT table memory at [mem 0x9a5ef978-0x9a5f2acb] ACPI: Reserving HPET table memory at [mem 0x9a5f2ad0-0x9a5f2b07] ACPI: Reserving UEFI table memory at [mem 0x9a5f2b08-0x9a5f2b49] ACPI: Reserving SSDT table memory at [mem 0x9a5f2b50-0x9a5f3a2d] ACPI: Reserving SSDT table memory at [mem 0x9a5f3a30-0x9a5f3e12] ACPI: Reserving SSDT table memory at [mem 0x9a5f3e18-0x9a5f4288] ACPI: Reserving LPIT table memory at [mem 0x9a5f4290-0x9a5f4323] ACPI: Reserving WSMT table memory at [mem 0x9a5f4328-0x9a5f434f] ACPI: Reserving SSDT table memory at [mem 0x9a5f4350-0x9a5f45ee] ACPI: Reserving DBGP table memory at [mem 0x9a5f45f0-0x9a5f4623] ACPI: Reserving DBG2 table memory at [mem 0x9a5f4628-0x9a5f467b] ACPI: Reserving BGRT table memory at [mem 0x9a5f4680-0x9a5f46b7] ACPI: Reserving DMAR table memory at [mem 0x9a5f46b8-0x9a5f47a7] ACPI: Reserving TPM2 table memory at [mem 0x9a5f47a8-0x9a5f47db] No NUMA configuration found [ 0.018655] Faking a node at [mem 0x0000000000000000-0x000000045effffff] NODE_DATA(0) allocated [mem 0x45efd5000-0x45effffff] Zone ranges: [ 0.018856] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000045effffff] Device empty [ 0.018863] Movable zone start for each node [ 0.018866] Early memory node ranges [ 0.018866] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x0000000094a61fff] node 0: [mem 0x0000000094a64000-0x0000000099886fff] node 0: [mem 0x000000009b27f000-0x000000009b2fefff] node 0: [mem 0x0000000100000000-0x000000045effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000045effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018882] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.018903] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.023543] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.023613] On node 0, zone DMA32: 6648 pages in unavailable ranges [ 0.050237] On node 0, zone Normal: 19713 pages in unavailable ranges [ 0.050279] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.050295] Reserving Intel graphics memory at [mem 0x9c000000-0x9fffffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.050581] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.050583] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.050584] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.050585] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.050616] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.050620] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.050622] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.050626] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.050628] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.050634] e820: update [mem 0x98183000-0x981b1fff] usable ==> reserved [ 0.050649] TSC deadline timer available [ 0.050650] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.050667] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x8bab0000-0x8bab0fff] PM: hibernation: Registered nosave memory: [mem 0x8bac0000-0x8bac0fff] PM: hibernation: Registered nosave memory: [mem 0x94a62000-0x94a62fff] PM: hibernation: Registered nosave memory: [mem 0x94a63000-0x94a63fff] PM: hibernation: Registered nosave memory: [mem 0x98183000-0x981b1fff] PM: hibernation: Registered nosave memory: [mem 0x98572000-0x98572fff] PM: hibernation: Registered nosave memory: [mem 0x99887000-0x9a5b1fff] PM: hibernation: Registered nosave memory: [mem 0x9a5b2000-0x9a5f4fff] PM: hibernation: Registered nosave memory: [mem 0x9a5f5000-0x9adb0fff] PM: hibernation: Registered nosave memory: [mem 0x9adb1000-0x9b27efff] PM: hibernation: Registered nosave memory: [mem 0x9b2ff000-0x9fffffff] PM: hibernation: Registered nosave memory: [mem 0xa0000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [mem 0xa0000000-0xfdffffff] available for PCI devices [ 0.050698] Booting paravirtualized kernel on bare hardware [ 0.050700] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.050708] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.051081] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u524288 [ 0.051089] pcpu-alloc: s221184 r8192 d28672 u524288 alloc=1*2097152 [ 0.051092] pcpu-alloc: [0] 0 1 2 3 [ 0.051115] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.0-14-generic root=UUID=HASH_719-F0E9-4A4C-3BDD-A155E5E32291 ro quiet splash vt.handoff=7 [ 0.051199] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.5.0-14-generic", will be passed to user space. [ 0.051252] random: crng init done [ 0.053185] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.054181] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.054252] Fallback order for Node 0: 0 [ 0.054255] Built 1 zonelists, mobility grouping on. Total pages: 4098528 [ 0.054257] Policy zone: Normal [ 0.054262] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.054272] software IO TLB: area num 4. [ 0.115386] Memory: 16018252K/16654980K available (20480K kernel code, 4265K rwdata, 13180K rodata, 4792K init, 17396K bss, 636468K reserved, 0K cma-reserved) [ 0.115643] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.115656] Kernel/User page tables isolation: enabled [ 0.115691] ftrace: allocating 55226 entries in 216 pages [ 0.126776] ftrace: allocated 216 pages with 4 groups [ 0.127634] Dynamic Preempt: voluntary [ 0.127664] rcu: Preemptible hierarchical RCU implementation. [ 0.127665] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.127666] Trampoline variant of Tasks RCU enabled. [ 0.127667] Rude variant of Tasks RCU enabled. [ 0.127667] Tracing variant of Tasks RCU enabled. [ 0.127668] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.127669] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.130982] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.131213] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.131393] Console: colour dummy device 80x25 [ 0.131395] printk: console [tty0] enabled [ 0.131457] ACPI: Core revision 20230331 [ 0.131634] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.131636] APIC: Switch to symmetric I/O mode setup [ 0.131639] DMAR: Host address width 39 [ 0.131640] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.131649] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.131652] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.131656] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.131659] DMAR: RMRR base: 0x00000099d42000 end: 0x00000099d61fff [ 0.131660] DMAR: RMRR base: 0x0000009b800000 end: 0x0000009fffffff [ 0.131662] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.131663] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.131665] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.131667] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.131668] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.133418] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.133420] x2apic enabled [ 0.133436] Switched APIC routing to cluster x2apic. [ 0.137361] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns [ 0.137370] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544) [ 0.137399] x86/cpu: SGX disabled by BIOS. [ 0.137409] CPU0: Thermal monitoring enabled (TM1) [ 0.137453] process: using mwait in idle threads [ 0.137457] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.137459] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.137464] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.137466] Spectre V2 : Mitigation: IBRS [ 0.137467] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.137469] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.137470] RETBleed: Mitigation: IBRS [ 0.137472] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.137473] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.137475] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.137484] MDS: Mitigation: Clear CPU buffers [ 0.137485] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.137491] SRBDS: Mitigation: Microcode [ 0.137498] GDS: Mitigation: Microcode [ 0.137505] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.137507] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.137509] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.137511] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.137512] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.137514] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.137516] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.137518] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.137520] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.141365] Freeing SMP alternatives memory: 44K [ 0.141365] pid_max: default: 32768 minimum: 301 [ 0.141365] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.141365] landlock: Up and running. [ 0.141365] Yama: becoming mindful. [ 0.141365] AppArmor: AppArmor initialized [ 0.141365] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.141365] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.141365] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9) [ 0.141365] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.141365] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.141365] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.141365] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.141365] ... version: 4 [ 0.141365] ... bit width: 48 [ 0.141365] ... generic registers: 4 [ 0.141365] ... value mask: 0000ffffffffffff [ 0.141365] ... max period: 00007fffffffffff [ 0.141365] ... fixed-purpose events: 3 [ 0.141365] ... event mask: 000000070000000f [ 0.141365] signal: max sigframe size: 2032 [ 0.141365] Estimated ratio of average max frequency by base frequency (times 1024): 1235 [ 0.141365] rcu: Hierarchical SRCU implementation. [ 0.141365] rcu: Max phase no-delay instances is 1000. [ 0.141365] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.141365] smp: Bringing up secondary CPUs ... [ 0.141365] smpboot: x86: Booting SMP configuration: [ 0.141365] .... node #0, CPUs: #1 #2 #3 [ 0.146047] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.146047] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.146047] smp: Brought up 1 node, 4 CPUs [ 0.146047] smpboot: Max logical packages: 1 [ 0.146047] smpboot: Total of 4 processors activated (23199.08 BogoMIPS) [ 0.149682] devtmpfs: initialized [ 0.149682] x86/mm: Memory block size: 128MB [ 0.151239] ACPI: PM: Registering ACPI NVS region [mem 0x94a62000-0x94a62fff] (4096 bytes) [ 0.151239] ACPI: PM: Registering ACPI NVS region [mem 0x9a5f5000-0x9adb0fff] (8110080 bytes) [ 0.151239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.151239] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.151239] pinctrl core: initialized pinctrl subsystem [ 0.151239] PM: RTC time: 22:04:08, date: 2024-01-19 [ 0.151239] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.151239] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.151239] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.151239] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.153574] thermal_sys: Registered thermal governor 'fair_share' [ 0.153576] thermal_sys: Registered thermal governor 'bang_bang' [ 0.153577] thermal_sys: Registered thermal governor 'step_wise' [ 0.153578] thermal_sys: Registered thermal governor 'user_space' [ 0.153579] thermal_sys: Registered thermal governor 'power_allocator' [ 0.153593] EISA bus registered [ 0.153608] cpuidle: using governor ladder [ 0.153608] cpuidle: using governor menu [ 0.153608] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.153608] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.153608] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.153608] PCI: not using MMCONFIG [ 0.153608] PCI: Using configuration type 1 for base access [ 0.153745] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.153754] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.153754] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.153754] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.153754] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.153754] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.153754] fbcon: Taking over console [ 0.153754] ACPI: Added _OSI(Module Device) [ 0.153754] ACPI: Added _OSI(Processor Device) [ 0.153754] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.153754] ACPI: Added _OSI(Processor Aggregator Device) [ 0.211421] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.214081] ACPI: EC: EC started [ 0.214083] ACPI: EC: interrupt blocked [ 0.215517] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.215519] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.217371] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.223658] ACPI: Dynamic OEM Table Load: [ 0.223658] ACPI: SSDT 0xFFFF9714C0CF2800 0006F6 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.227087] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.229516] ACPI: Dynamic OEM Table Load: [ 0.229524] ACPI: SSDT 0xFFFF9714C0B04000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.232214] ACPI: Dynamic OEM Table Load: [ 0.232221] ACPI: SSDT 0xFFFF9714C0CF4000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.234863] ACPI: Dynamic OEM Table Load: [ 0.234870] ACPI: SSDT 0xFFFF9714C0229800 000197 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.236971] ACPI: Dynamic OEM Table Load: [ 0.236978] ACPI: SSDT 0xFFFF9714C0228800 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.241665] ACPI: Interpreter enabled [ 0.241712] ACPI: PM: (supports S0 S3 S4 S5) [ 0.241714] ACPI: Using IOAPIC for interrupt routing [ 0.244585] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.246802] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved as ACPI motherboard resource [ 0.246815] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.246817] PCI: Using E820 reservations for host bridge windows [ 0.248600] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.254893] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource [ 0.255086] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource [ 0.255274] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource [ 0.255459] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource [ 0.255642] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource [ 0.255827] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource [ 0.256011] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource [ 0.256201] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource [ 0.256387] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource [ 0.256571] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource [ 0.256756] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource [ 0.256940] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource [ 0.257128] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource [ 0.257313] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource [ 0.257512] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource [ 0.257700] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource [ 0.257884] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource [ 0.258435] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource [ 0.258621] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource [ 0.258806] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource [ 0.277664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.277673] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.282137] PCI host bridge to bus 0000:00 [ 0.282140] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xefffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-7e] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 [ 0.282386] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000 [ 0.282397] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.282434] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.282731] pci 0000:00:04.0: reg 0x10: [mem 0xef120000-0xef127fff 64bit] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.283222] pci 0000:00:14.0: reg 0x10: [mem 0xef110000-0xef11ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.284326] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.284351] pci 0000:00:14.2: reg 0x10: [mem 0xef138000-0xef138fff 64bit] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.284851] pci 0000:00:15.0: reg 0x10: [mem 0xef137000-0xef137fff 64bit] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.286389] pci 0000:00:15.1: reg 0x10: [mem 0xef136000-0xef136fff 64bit] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.287665] pci 0000:00:16.0: reg 0x10: [mem 0xef135000-0xef135fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.288182] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.288198] pci 0000:00:17.0: reg 0x10: [mem 0xef130000-0xef131fff] pci 0000:00:17.0: reg 0x14: [mem 0xef134000-0xef1340ff] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:17.0: reg 0x24: [mem 0xef133000-0xef1337ff] pci 0000:00:17.0: PME# supported from D3hot [ 0.288720] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 [ 0.288822] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.289711] pci 0000:00:1c.7: [8086:9d17] type 01 class 0x060400 [ 0.289828] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.290737] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100 [ 0.291242] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.291261] pci 0000:00:1f.2: reg 0x10: [mem 0xef12c000-0xef12ffff] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300 [ 0.291693] pci 0000:00:1f.3: reg 0x10: [mem 0xef128000-0xef12bfff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0xef100000-0xef10ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.292642] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.292705] pci 0000:00:1f.4: reg 0x10: [mem 0xef132000-0xef1320ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000 [ 0.293594] pci 0000:02:00.0: reg 0x10: [mem 0xef000000-0xef001fff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.295719] pci 0000:00:1c.7: PCI bridge to [bus 02] pci 0000:00:1c.7: bridge window [mem 0xef000000-0xef0fffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.299287] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.299388] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.299487] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.299586] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.299686] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.299785] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.299884] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.305824] ACPI: EC: interrupt unblocked [ 0.305826] ACPI: EC: event unblocked [ 0.305833] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.305835] ACPI: EC: GPE=0x50 [ 0.305837] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot ECDT EC initialization complete [ 0.305839] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.305922] iommu: Default domain type: Translated [ 0.305922] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.305922] SCSI subsystem initialized [ 0.305922] libata version 3.00 loaded. [ 0.305922] ACPI: bus type USB registered [ 0.305922] usbcore: registered new interface driver usbfs [ 0.305922] usbcore: registered new interface driver hub [ 0.305922] usbcore: registered new device driver usb [ 0.305922] pps_core: LinuxPPS API ver. 1 registered [ 0.305922] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.305922] PTP clock support registered [ 0.305922] EDAC MC: Ver: 3.0.0 [ 0.305922] efivars: Registered efivars operations [ 0.305922] NetLabel: Initializing [ 0.305922] NetLabel: domain hash size = 128 [ 0.305922] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.305922] NetLabel: unlabeled traffic allowed by default [ 0.305922] mctp: management component transport protocol core [ 0.305922] NET: Registered PF_MCTP protocol family [ 0.305922] PCI: Using ACPI for IRQ routing [ 0.320439] PCI: pci_cache_line_size set to 64 bytes [ 0.321091] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0x8bab0018-0x8bffffff] e820: reserve RAM buffer [mem 0x94a62000-0x97ffffff] e820: reserve RAM buffer [mem 0x98183000-0x9bffffff] e820: reserve RAM buffer [mem 0x98572000-0x9bffffff] e820: reserve RAM buffer [mem 0x99887000-0x9bffffff] e820: reserve RAM buffer [mem 0x9b2ff000-0x9bffffff] e820: reserve RAM buffer [mem 0x45f000000-0x45fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.321377] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.321378] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.321383] vgaarb: loaded [ 0.323115] clocksource: Switched to clocksource tsc-early [ 0.336956] VFS: Disk quotas dquot_6.6.0 [ 0.336979] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.337138] AppArmor: AppArmor Filesystem Enabled [ 0.337184] pnp: PnP ACPI init [ 0.337578] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.337582] system 00:00: [io 0xffff] has been reserved [ 0.337585] system 00:00: [io 0xffff] has been reserved [ 0.337587] system 00:00: [io 0xffff] has been reserved [ 0.337589] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.337591] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.337783] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.338407] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.338411] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.338413] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.338415] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.338417] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.338420] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.338422] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.338424] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.338426] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.338429] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved [ 0.338489] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.338492] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.338494] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.338496] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.338498] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.338500] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.338505] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.338924] system 00:06: [io 0xff00-0xfffe] has been reserved [ 0.340761] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.340765] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.340767] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.340769] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.340771] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.342478] pnp: PnP ACPI: found 8 devices [ 0.348820] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.348894] NET: Registered PF_INET protocol family [ 0.349035] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.352357] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.352394] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.352466] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.352695] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.352947] TCP: Hash tables configured (established 131072 bind 65536) [ 0.353060] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.353110] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.353152] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.353218] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.353228] NET: Registered PF_XDP protocol family [ 0.353236] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.353241] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.353244] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.353254] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0000000-0xa01fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0xa0200000-0xa03fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa01fffff] pci 0000:00:1c.0: bridge window [mem 0xa0200000-0xa03fffff 64bit pref] pci 0000:00:1c.7: PCI bridge to [bus 02] pci 0000:00:1c.7: bridge window [mem 0xef000000-0xef0fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xefffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xa01fffff] pci_bus 0000:01: resource 2 [mem 0xa0200000-0xa03fffff 64bit pref] pci_bus 0000:02: resource 1 [mem 0xef000000-0xef0fffff] PCI: CLS 64 bytes, default 64 [ 0.354365] DMAR: ACPI device "device:6d" under DMAR at fed91000 as 00:15.0 [ 0.354372] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.1 [ 0.354388] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.354389] software IO TLB: mapped [mem 0x0000000087ab0000-0x000000008bab0000] (64MB) [ 0.354423] Trying to unpack rootfs image as initramfs... [ 0.358779] Initialise system trusted keyrings [ 0.358793] Key type blacklist registered [ 0.358845] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.358869] zbud: loaded [ 0.359245] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.359353] fuse: init (API version 7.38) [ 0.359517] integrity: Platform Keyring initialized [ 0.359523] integrity: Machine keyring initialized [ 0.376759] Key type asymmetric registered [ 0.376765] Asymmetric key parser 'x509' registered [ 0.376800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.376865] io scheduler mq-deadline registered [ 0.377662] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.377717] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.378187] pcieport 0000:00:1c.7: PME: Signaling with IRQ 123 [ 0.378271] pcieport 0000:00:1c.7: AER: enabled with IRQ 123 [ 0.378392] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.378480] efifb: probing for efifb [ 0.378505] efifb: showing boot graphics [ 0.379762] efifb: framebuffer at 0xd0000000, using 8100k, total 8100k [ 0.379766] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.379769] efifb: scrolling: redraw [ 0.379770] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.379928] Console: switching to colour frame buffer device 240x67 [ 0.383349] fb0: EFI VGA frame buffer device [ 0.384099] ACPI: AC: AC Adapter [AC0] (on-line) [ 0.384194] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:01/PNP0C0D:00/input/input0 [ 0.384227] ACPI: button: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.384339] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.384414] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.384656] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.390165] ACPI: thermal: Thermal Zone [THRM] (37 C) [ 0.390514] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.399639] hpet_acpi_add: no address or irqs in _CRS [ 0.399697] Linux agpgart interface v0.103 [ 0.400851] ACPI: battery: Slot [BAT0] (battery present) [ 0.401268] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [ 0.401335] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [ 0.417937] loop: module loaded [ 0.418295] tun: Universal TUN/TAP device driver, 1.6 [ 0.418338] PPP generic driver version 2.4.2 [ 0.418469] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1 [ 0.418473] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.419264] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.419377] mousedev: PS/2 mouse device common for all mice [ 0.419568] rtc_cmos 00:01: RTC can wake from S4 [ 0.420296] rtc_cmos 00:01: registered as rtc0 [ 0.420431] rtc_cmos 00:01: setting system clock to 2024-01-19T22:04:09 UTC (1705701849) [ 0.420468] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.420480] i2c_dev: i2c /dev entries driver [ 0.420592] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.420606] device-mapper: uevent: version 1.0.3 [ 0.420652] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.420677] platform eisa.0: Probing EISA bus 0 [ 0.420680] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.420682] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.420684] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.420686] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.420687] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.420689] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.420690] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.420692] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.420694] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.420695] platform eisa.0: EISA: Detected 0 cards [ 0.420699] intel_pstate: Intel P-state driver initializing [ 0.420871] intel_pstate: HWP enabled [ 0.420902] ledtrig-cpu: registered to indicate activity on CPUs [ 0.420977] intel_pmc_core INT33A1:00: initialized [ 0.421085] drop_monitor: Initializing network drop monitor service [ 0.435411] NET: Registered PF_INET6 protocol family [ 0.459075] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.990806] Freeing initrd memory: 122360K [ 0.996948] Segment Routing with IPv6 [ 0.996962] In-situ OAM (IOAM) with IPv6 [ 0.996994] NET: Registered PF_PACKET protocol family [ 0.997104] Key type dns_resolver registered [ 0.997424] microcode: Microcode Update Driver: v2.2. [ 0.997429] IPI shorthand broadcast: enabled [ 0.998919] sched_clock: Marking stable (992002596, 6019965)->(1046698228, -48675667) [ 0.999043] registered taskstats version 1 [ 0.999216] Loading compiled-in X.509 certificates [ 0.999723] Loaded X.509 cert 'Build time autogenerated kernel key: 605c7c135229ebe23ab6a6fa2965fd12055e3c58' [ 1.000144] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.000581] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.000582] blacklist: Loading compiled-in revocation X.509 certificates [ 1.000597] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.000613] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 1.000627] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 1.000640] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 1.000653] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 1.000669] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 1.000682] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 1.000695] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 1.002465] Key type .fscrypt registered [ 1.002467] Key type fscrypt-provisioning registered [ 1.002647] Key type trusted registered [ 1.005691] Key type encrypted registered [ 1.005696] AppArmor: AppArmor sha1 policy hashing enabled [ 1.006690] integrity: Loading X.509 certificate: UEFI:db [ 1.007028] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' [ 1.007030] integrity: Loading X.509 certificate: UEFI:db [ 1.007171] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' [ 1.007172] integrity: Loading X.509 certificate: UEFI:db [ 1.007192] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.007193] integrity: Loading X.509 certificate: UEFI:db [ 1.007208] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.007209] integrity: Loading X.509 certificate: UEFI:db [ 1.007351] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 1.008205] integrity: Revoking X.509 certificate: UEFI:dbx [ 1.008222] blacklist: Revoked X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.008223] integrity: Revoking X.509 certificate: UEFI:dbx [ 1.008234] blacklist: Revoked X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 1.008417] blacklist: Duplicate blacklisted hash bin:HASH_D5E-2486-D39F-88E9-20BDC75BA496 [ 1.008492] blacklist: Duplicate blacklisted hash bin:HASH_E74-933C-7175-DCDF-C2731C4026DC [ 1.008537] blacklist: Duplicate blacklisted hash bin:HASH_D3D-D934-A885-156A-25EE4C623E1D [ 1.008562] blacklist: Duplicate blacklisted hash bin:HASH_F35-BB04-49F5-7893-D6E8E3B1E84B [ 1.008601] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 1.008749] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 1.008753] Loading compiled-in module X.509 certificates [ 1.009174] Loaded X.509 cert 'Build time autogenerated kernel key: 605c7c135229ebe23ab6a6fa2965fd12055e3c58' [ 1.009176] ima: Allocated hash algorithm: sha1 [ 1.048118] evm: Initialising EVM extended attributes: [ 1.048120] evm: security.selinux [ 1.048122] evm: security.SMACK64 [ 1.048123] evm: security.SMACK64EXEC [ 1.048124] evm: security.SMACK64TRANSMUTE [ 1.048125] evm: security.SMACK64MMAP [ 1.048126] evm: security.apparmor [ 1.048127] evm: security.ima [ 1.048128] evm: security.capability [ 1.048129] evm: HMAC attrs: 0x1 [ 1.048465] PM: Magic number: 8:245:98 [ 1.054863] RAS: Correctable Errors collector initialized. [ 1.054919] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 1.054942] clk: Disabling unused clocks [ 1.055949] Freeing unused decrypted memory: 2036K [ 1.056546] Freeing unused kernel image (initmem) memory: 4792K [ 1.070208] Write protecting the kernel read-only data: 34816k [ 1.070718] Freeing unused kernel image (rodata/data gap) memory: 1156K [ 1.126822] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.126824] x86/mm: Checking user space page tables [ 1.170363] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.170368] Run /init as init process [ 1.170370] with arguments: [ 1.170371] /init [ 1.170372] splash [ 1.170373] with environment: [ 1.170374] HOME=/ [ 1.170375] TERM=linux [ 1.170376] BOOT_IMAGE=/boot/vmlinuz-6.5.0-14-generic [ 1.329230] hid: raw HID events driver (C) Jiri Kosina [ 1.350938] ahci 0000:00:17.0: version 3.0 [ 1.350968] cryptd: max_cpu_qlen set to 1000 [ 1.353595] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode [ 1.353602] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.355027] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.355036] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.356127] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.356711] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.356715] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.356718] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.357713] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.357716] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.357718] usb usb1: Product: xHCI Host Controller [ 1.357719] usb usb1: Manufacturer: Linux 6.5.0-14-generic xhci-hcd [ 1.357721] usb usb1: SerialNumber: ... [ 1.357883] hub 1-0:1.0: USB hub found [ 1.357906] hub 1-0:1.0: 12 ports detected [ 1.364400] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 1.364405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.364407] usb usb2: Product: xHCI Host Controller [ 1.364411] usb usb2: Manufacturer: Linux 6.5.0-14-generic xhci-hcd [ 1.364412] usb usb2: SerialNumber: ... [ 1.364516] hub 2-0:1.0: USB hub found [ 1.364535] hub 2-0:1.0: 6 ports detected [ 1.366073] scsi host0: ahci [ 1.366765] scsi host1: ahci [ 1.366860] scsi host2: ahci [ 1.366908] ata1: SATA max UDMA/133 abar m2048@0xef133000 port 0xef133100 irq 124 [ 1.366910] ata2: DUMMY [ 1.366912] ata3: SATA max UDMA/133 abar m2048@0xef133000 port 0xef133200 irq 124 [ 1.381135] ACPI: bus type drm_connector registered [ 1.381167] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.381215] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.381301] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 [ 1.381376] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] tsc: Refined TSC clocksource calibration: 2903.998 MHz [ 1.382039] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc03c1beb, max_idle_ns: 440795205215 ns [ 1.382055] clocksource: Switched to clocksource tsc [ 1.385187] i2c i2c-0: 2/4 memory slots populated (from DMI) [ 1.385951] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 1.622097] usb 1-2: new full-speed USB device number 2 using xhci_hcd [ 1.681979] ata1: SATA link down (SStatus 4 SControl 300) [ 1.682062] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.683368] ata3.00: ATA-9: SanDisk SD8SN8U512G1002, X4131002, max UDMA/133 [ 1.683503] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.684400] ata3.00: Features: Dev-Sleep [ 1.686929] ata3.00: configured for UDMA/133 [ 1.697085] ahci 0000:00:17.0: port does not support device sleep [ 1.697594] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SN8U5 1002 PQ: 0 ANSI: 5 [ 1.699229] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.699404] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.699464] sd 2:0:0:0: [sda] Write Protect is off [ 1.699474] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.699562] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.699671] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.703655] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 [ 1.705084] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.734567] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.735640] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.749128] AVX2 version of gcm_enc/dec engaged. [ 1.749241] AES CTR mode by8 optimization enabled [ 1.766717] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 1.767675] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 1.772429] asus_wmi: ASUS WMI generic driver loaded [ 1.776416] usb 1-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 1.776430] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.776437] usb 1-2: Product: USB Receiver [ 1.776443] usb 1-2: Manufacturer: Logitech [ 1.914052] usb 1-6: new high-speed USB device number 3 using xhci_hcd [ 1.935938] input: ELAN1200:00 04F3:3022 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3022.0001/input/input5 [ 1.936362] input: ELAN1200:00 04F3:3022 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3022.0001/input/input6 [ 1.936716] hid-generic 0018:04F3:3022.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3022] on i2c-ELAN1200:00 [ 2.112165] usb 1-6: New USB device found, idVendor=04f2, idProduct=b57a, bcdDevice=10.01 [ 2.112170] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.112172] usb 1-6: Product: USB2.0 HD UVC WebCam [ 2.112174] usb 1-6: Manufacturer: Chicony Electronics Co.,Ltd. [ 2.112175] usb 1-6: SerialNumber: ... [ 2.242075] usb 1-8: new full-speed USB device number 4 using xhci_hcd [ 2.391466] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01 [ 2.391469] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.463313] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C534.0002/input/input7 [ 2.465012] Console: switching to colour dummy device 80x25 [ 2.465078] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.466436] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.467009] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 2.520298] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 2.522989] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.523232] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 2.526309] hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 2.528492] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/input/input9 [ 2.528599] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/input/input10 [ 2.586497] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/input/input11 [ 2.587107] hid-generic 0003:046D:C534.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 2.587285] usbcore: registered new interface driver usbhid [ 2.587291] usbhid: USB HID core driver [ 2.646619] fbcon: i915drmfb (fb0) is primary device [ 2.652771] Console: switching to colour frame buffer device 240x67 [ 2.670645] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 2.806332] logitech-djreceiver 0003:046D:C534.0002: hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 3.007306] logitech-djreceiver 0003:046D:C534.0003: hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 3.067799] logitech-djreceiver 0003:046D:C534.0003: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 3.073412] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/0003:046D:4054.0004/input/input14 [ 3.073525] hid-generic 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-2/input1:2 [ 3.146000] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0003/0003:046D:4054.0004/input/input18 [ 3.146390] logitech-hidpp-device 0003:046D:4054.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-2/input1:2 [ 3.462772] EXT4-fs (sda5): mounted filesystem HASH_719-F0E9-4A4C-3BDD-A155E5E32291 ro with ordered data mode. Quota mode: none. [ 3.936374] block sda: the capability attribute has been deprecated. [ 4.114159] EXT4-fs (sda5): re-mounted HASH_719-F0E9-4A4C-3BDD-A155E5E32291 r/w. Quota mode: none. [ 4.130587] pstore: Using crash dump compression: deflate [ 4.158867] pstore: Registered efi_pstore as persistent store backend [ 4.169462] lp: driver loaded but no devices found [ 4.177510] ppdev: user-space parallel port driver [ 4.239491] loop0: detected capacity change from 0 to 129944 [ 4.239673] loop1: detected capacity change from 0 to 8 [ 4.244413] loop2: detected capacity change from 0 to 130888 [ 4.244469] loop3: detected capacity change from 0 to 151784 [ 4.246744] loop4: detected capacity change from 0 to 485800 [ 4.250879] loop5: detected capacity change from 0 to 503800 [ 4.251311] loop6: detected capacity change from 0 to 716176 [ 4.253686] loop7: detected capacity change from 0 to 1017816 [ 4.257914] loop8: detected capacity change from 0 to 187776 [ 4.261657] loop10: detected capacity change from 0 to 109072 [ 4.262159] loop9: detected capacity change from 0 to 82800 [ 4.462976] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input19 [ 4.480594] Consider using thermal netlink events interface [ 4.620886] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.663284] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.663750] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.681203] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only [ 4.701039] mc: Linux media interface: v0.10 [ 4.731549] input: ELAN1200:00 04F3:3022 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3022.0001/input/input20 [ 4.731783] asus_wmi: Initialization: 0x1 [ 4.731857] asus_wmi: BIOS WMI version: 9.0 [ 4.731920] asus_wmi: SFUN value: 0x2021 [ 4.731923] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS [ 4.731926] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue [ 4.735170] Intel(R) Wireless WiFi driver for Linux [ 4.735939] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 4.737419] input: ELAN1200:00 04F3:3022 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3022.0001/input/input21 [ 4.737457] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.ATKD.WMNB.GALS], AE_NOT_FOUND (20230331/psargs-330) [ 4.737468] [ 4.737470] Initialized Local Variables for Method [WMNB]: [ 4.737472] Local0: 000000002d1e081c <Obj> Integer 0000000053545344 [ 4.737479] [ 4.737480] Initialized Arguments for Method [WMNB]: (3 arguments defined for method invocation) [ 4.737482] Arg0: 000000009512e47c <Obj> Integer 0000000000000000 [ 4.737499] Arg1: 000000004ebe00e7 <Obj> Integer 0000000053545344 [ 4.737505] Arg2: 00000000f0fb9dcb <Obj> Buffer(24) 01 00 05 00 00 00 00 00 [ 4.737517] [ 4.737521] ACPI Error: Aborting method \_SB.ATKD.WMNB due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 4.738341] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 4.742278] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input22 [ 4.743450] iwlwifi 0000:02:00.0: Detected crf-id 0xbadcafe, cnv-id 0x3000000 wfpm id 0x80000000 [ 4.743505] iwlwifi 0000:02:00.0: PCI dev 24f3/0110, rev=0x201, rfid=0xd55555d5 [ 4.745451] hid-multitouch 0018:04F3:3022.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3022] on i2c-ELAN1200:00 [ 4.745485] intel_rapl_common: Found RAPL domain package [ 4.745487] intel_rapl_common: Found RAPL domain dram [ 4.761528] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19 [ 4.761856] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19 [ 4.774898] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8000C-36.ucode op_mode iwlmvm [ 4.813215] Bluetooth: Core ver 2.22 [ 4.813236] NET: Registered PF_BLUETOOTH protocol family [ 4.813238] Bluetooth: HCI device and connection manager initialized [ 4.813243] Bluetooth: HCI socket layer initialized [ 4.813245] Bluetooth: L2CAP socket layer initialized [ 4.813253] Bluetooth: SCO socket layer initialized [ 4.819032] videodev: Linux video capture interface: v2.00 [ 4.863606] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 4.863611] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.863613] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.863614] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.863616] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.863617] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 5.016026] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x201 [ 5.016437] thermal thermal_zone5: failed to read out thermal zone (-61) [ 5.044730] Adding 16654332k swap on /dev/sda6. Priority:-2 extents:1 across:16654332k SSFS [ 5.061363] usbcore: registered new interface driver btusb [ 5.093762] iwlwifi 0000:02:00.0: base HW address: D1D52F325132163101B7E64293D1FC62, OTP minor version: 0x0 [ 5.100207] Bluetooth: hci0: Firmware revision 0.0 build 14 week 44 2021 [ 5.102789] Bluetooth: hci0: Reading supported features failed (-16) [ 5.102795] Bluetooth: hci0: Error reading debug features [ 5.102797] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 5.117270] usb 1-6: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b57a) [ 5.124172] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 5.132865] intel_rapl_common: Found RAPL domain package [ 5.132870] intel_rapl_common: Found RAPL domain core [ 5.132872] intel_rapl_common: Found RAPL domain uncore [ 5.132874] intel_rapl_common: Found RAPL domain dram [ 5.132875] intel_rapl_common: Found RAPL domain psys [ 5.133720] usbcore: registered new interface driver uvcvideo [ 5.159674] EXT4-fs (sda7): mounted filesystem HASH_115-6DFE-BCE6-3FD3-760AC8ED7567 r/w with ordered data mode. Quota mode: none. [ 5.168597] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.207536] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.250913] intel_tcc_cooling: Programmable TCC Offset detected [ 5.274131] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.274805] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.342332] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 5.342339] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.342342] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 5.342345] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0 [ 5.342347] snd_hda_codec_generic hdaudioC0D0: inputs: [ 5.342349] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x1a [ 5.342352] snd_hda_codec_generic hdaudioC0D0: Mic=0x19 [ 5.413393] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 5.413458] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 5.413512] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 5.413567] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 5.413624] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 6.083329] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.083336] Bluetooth: BNEP filters: protocol multicast [ 6.083342] Bluetooth: BNEP socket layer initialized [ 6.088044] Bluetooth: MGMT ver 1.22 [ 6.112668] NET: Registered PF_ALG protocol family [ 6.368700] Lockdown: Xorg: raw io port access is restricted; see man kernel_lockdown.7 [ 6.388019] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 7.053371] loop11: detected capacity change from 0 to 8 [ 9.000801] Bluetooth: RFCOMM TTY layer initialized [ 9.000810] Bluetooth: RFCOMM socket layer initialized [ 9.000816] Bluetooth: RFCOMM ver 1.11 [ 9.807370] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [ 9.816980] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [ 9.926079] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [ 10.037706] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [ 10.142075] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [ 10.417477] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [ 10.417518] wlp2s0: 80 MHz not supported, disabling VHT [ 10.425671] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [ 10.433738] wlp2s0: authenticated [ 10.438156] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [ 10.442330] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [ 10.450292] wlp2s0: associated [ 16.479174] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 17.989199] ntfs3: Max link count 4000 [ 17.989204] ntfs3: Enabled Linux POSIX ACLs support [ 17.989205] ntfs3: Read-only LZX/Xpress compression included [ 18.005312] ntfs3: sda3: It is recommened to use chkdsk. [ 18.038234] ntfs3: sda3: volume is dirty and "force" flag is not set! [ 151.257967] logitech-hidpp-device 0003:046D:4054.0004: HID++ 4.5 device connected. [ 846.372494] workqueue: delayed_fput hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND [ 4058.878041] perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 5412.976877] perf: interrupt took too long (3151 > 3131), lowering kernel.perf_event_max_sample_rate to 63250 [ 7282.650740] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [ 7282.748650] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [ 7282.758959] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [ 7282.860510] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [ 7282.979873] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [ 7283.084514] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [ 7283.356380] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [ 7283.356434] wlp2s0: 80 MHz not supported, disabling VHT [ 7283.364893] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [ 7283.369626] wlp2s0: authenticated [ 7283.372674] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [ 7283.376892] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [ 7283.392393] wlp2s0: associated [ 7350.890980] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [ 7350.969120] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [ 7350.982942] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [ 7351.092332] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [ 7351.207667] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [ 7351.312310] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [ 7353.228208] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [ 7353.228325] wlp2s0: 80 MHz not supported, disabling VHT [ 7353.236575] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [ 7353.241552] wlp2s0: authenticated [ 7353.245475] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [ 7353.249942] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [ 7353.258420] wlp2s0: associated [ 7626.277003] perf: interrupt took too long (3961 > 3938), lowering kernel.perf_event_max_sample_rate to 50250 [12133.275089] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [12133.350200] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [12133.361491] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [12133.466252] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [12133.581946] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [12133.686320] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [12133.953345] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [12133.953386] wlp2s0: 80 MHz not supported, disabling VHT [12133.961488] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [12133.965273] wlp2s0: authenticated [12133.966104] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [12133.970248] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [12133.977943] wlp2s0: associated [12203.083028] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [12203.151772] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [12203.164147] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [12203.274072] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [12203.389613] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [12203.494069] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [12206.677205] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [12206.677239] wlp2s0: 80 MHz not supported, disabling VHT [12206.685286] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [12206.689962] wlp2s0: authenticated [12206.693993] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [12206.698015] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [12206.706902] wlp2s0: associated [13726.971204] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [13727.045568] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [13727.059088] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [13727.166239] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [13727.281846] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [13727.386294] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [13729.997561] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [13729.997602] wlp2s0: 80 MHz not supported, disabling VHT [13730.007522] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [13730.010251] wlp2s0: authenticated [13730.014245] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [13730.018381] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [13730.038158] wlp2s0: associated [13868.386136] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [13868.460205] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [13868.472767] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [13868.581019] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [13868.696540] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [13868.800906] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [13871.987995] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [13871.988037] wlp2s0: 80 MHz not supported, disabling VHT [13871.996162] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [13872.000231] wlp2s0: authenticated [13872.001101] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [13872.005123] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [13872.008392] wlp2s0: associated [13926.344321] perf: interrupt took too long (4972 > 4951), lowering kernel.perf_event_max_sample_rate to 40000 [14491.401908] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [14491.480108] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [14491.491306] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [14491.600823] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [14491.716142] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [14491.816815] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [14493.852422] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [14493.852465] wlp2s0: 80 MHz not supported, disabling VHT [14493.862439] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [14493.868839] wlp2s0: authenticated [14493.872839] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [14493.876910] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [14493.880324] wlp2s0: associated [16337.381101] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [16337.456596] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [16337.469153] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [16337.579908] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [16337.692453] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [16337.796058] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [16340.631829] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [16340.631872] wlp2s0: 80 MHz not supported, disabling VHT [16340.641145] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [16340.645172] wlp2s0: authenticated [16340.647965] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [16340.652003] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [16340.659279] wlp2s0: associated [18183.963201] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [18184.044400] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [18184.054708] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [18184.165978] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [18184.281396] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [18184.381966] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [18187.097588] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [18187.097636] wlp2s0: 80 MHz not supported, disabling VHT [18187.106001] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [18187.112003] wlp2s0: authenticated [18187.114223] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [18187.118303] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [18187.122164] wlp2s0: associated [20032.249901] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [20032.331295] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [20032.343490] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [20032.452678] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [20032.567917] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [20032.668574] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [20035.163855] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [20035.163896] wlp2s0: 80 MHz not supported, disabling VHT [20035.172990] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [20035.179304] wlp2s0: authenticated [20035.184659] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [20035.188729] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [20035.196305] wlp2s0: associated [21878.801142] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [21878.864663] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [21878.875409] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [21878.983836] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [21879.099294] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [21879.203704] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [21881.467683] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [21881.467730] wlp2s0: 80 MHz not supported, disabling VHT [21881.475943] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [21881.479765] wlp2s0: authenticated [21881.483690] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [21881.487751] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [21881.490981] wlp2s0: associated [23725.488084] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [23725.559422] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [23725.571297] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [23725.683287] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [23725.798756] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [23725.903101] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [23728.621602] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [23728.621625] wlp2s0: 80 MHz not supported, disabling VHT [23728.629305] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [23728.634475] wlp2s0: authenticated [23728.635169] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [23728.639107] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [23728.646331] wlp2s0: associated [25576.025062] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [25576.087267] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [25576.099399] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [25576.207950] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [25576.323564] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [25576.427853] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [25579.491533] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [25579.491577] wlp2s0: 80 MHz not supported, disabling VHT [25579.499697] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [25579.503574] wlp2s0: authenticated [25579.507799] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [25579.511868] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [25579.514787] wlp2s0: associated [27399.589698] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [27399.674476] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [27399.688310] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [27399.796801] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [27399.912296] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [27400.016803] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [27402.968322] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [27402.968363] wlp2s0: 80 MHz not supported, disabling VHT [27402.977239] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [27402.982115] wlp2s0: authenticated [27402.988682] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [27402.992798] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [27402.997967] wlp2s0: associated [29244.436652] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [29244.509699] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [29244.522412] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [29244.631433] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [29244.743611] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [29244.847428] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [29247.227362] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [29247.227408] wlp2s0: 80 MHz not supported, disabling VHT [29247.238210] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [29247.242608] wlp2s0: authenticated [29247.243684] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [29247.247714] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [29247.250687] wlp2s0: associated [29273.799789] wlp2s0: deauthenticating from 48A293BBD0456311299D96618706209D by local choice (Reason: 3=DEAUTH_LEAVING) [29274.123521] PM: suspend entry (deep) [29274.148023] Filesystems sync: 0.024 seconds [29274.169686] Freezing user space processes [29274.171865] Freezing user space processes completed (elapsed 0.002 seconds) [29274.171870] OOM killer disabled. [29274.171871] Freezing remaining freezable tasks [29274.173064] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [29274.173101] printk: Suspending console(s) (use no_console_suspend to debug) [29274.243218] sd 2:0:0:0: [sda] Synchronizing SCSI cache [29274.250080] sd 2:0:0:0: [sda] Stopping disk [29274.524878] ACPI: EC: interrupt blocked [29274.563458] ACPI: PM: Preparing to enter system sleep state S3 [29274.567208] ACPI: EC: event blocked [29274.567211] ACPI: EC: EC stopped [29274.567213] ACPI: PM: Saving platform NVS memory [29274.567365] Disabling non-boot CPUs ... [29274.569179] smpboot: CPU 1 is now offline [29274.575782] smpboot: CPU 2 is now offline [29274.578196] smpboot: CPU 3 is now offline [29274.582546] ACPI: PM: Low-level resume complete [29274.582601] ACPI: EC: EC started [29274.582602] ACPI: PM: Restoring platform NVS memory [29274.583368] Enabling non-boot CPUs ... [29274.583397] smpboot: Booting Node 0 Processor 1 APIC 0x2 [29274.586984] CPU1 is up [29274.587002] smpboot: Booting Node 0 Processor 2 APIC 0x1 [29274.587933] CPU2 is up [29274.587953] smpboot: Booting Node 0 Processor 3 APIC 0x3 [29274.588711] CPU3 is up [29274.590881] ACPI: PM: Waking up from system sleep state S3 [29274.605752] ACPI: EC: interrupt unblocked [29274.625309] ACPI: EC: event unblocked [29274.627578] xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit [29274.627585] usb usb1: root hub lost power or was reset [29274.627589] usb usb2: root hub lost power or was reset [29274.628893] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [29274.628902] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [29274.628908] i915 0000:00:02.0: [drm] [ENCODER:118:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [29274.927677] usb 1-8: reset full-speed USB device number 4 using xhci_hcd [29274.943146] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [29274.943335] ata1: SATA link down (SStatus 4 SControl 300) [29274.947892] ata3.00: configured for UDMA/133 [29274.958035] ahci 0000:00:17.0: port does not support device sleep [29275.203920] usb 1-6: reset high-speed USB device number 3 using xhci_hcd [29275.479902] usb 1-2: reset full-speed USB device number 2 using xhci_hcd [29275.641040] OOM killer enabled. [29275.641043] Restarting tasks ... [29275.641126] pcieport 0000:00:1c.7: PCI bridge to [bus 02] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [29275.641141] pcieport 0000:00:1c.7: bridge window [mem 0xef000000-0xef0fffff] done. [29275.644889] random: crng reseeded on system resumption [29275.645398] thermal thermal_zone5: failed to read out thermal zone (-61) [29275.673112] PM: suspend exit [29275.673979] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [29275.681000] Bluetooth: hci0: Device revision is 5 [29275.681006] Bluetooth: hci0: Secure boot is enabled [29275.681007] Bluetooth: hci0: OTP lock is enabled [29275.681009] Bluetooth: hci0: API lock is enabled [29275.681010] Bluetooth: hci0: Debug lock is disabled [29275.681011] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [29276.040300] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [29277.579609] Bluetooth: hci0: Waiting for firmware download to complete [29277.580027] Bluetooth: hci0: Firmware loaded in 1503637 usecs [29277.580110] Bluetooth: hci0: Waiting for device to boot [29277.592058] Bluetooth: hci0: Device booted in 11704 usecs [29277.592063] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [29277.599262] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [29277.603097] Bluetooth: hci0: Applying Intel DDC parameters completed [29277.604092] Bluetooth: hci0: Firmware revision 0.0 build 14 week 44 2021 [29277.606036] Bluetooth: hci0: Reading supported features failed (-16) [29277.606053] Bluetooth: hci0: Error reading debug features [29277.606060] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [29277.651496] Bluetooth: MGMT ver 1.22 [29279.834138] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [29279.842300] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [29279.848904] wlp2s0: authenticated [29279.851481] wlp2s0: associate with 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [29279.852863] wlp2s0: RX AssocResp from 64DC9C6CBB364976DCA0FBEDE567B8D2 (capab=0x11 status=0 aid=1) [29279.854862] wlp2s0: associated [29279.924100] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 64DC9C6CBB364976DCA0FBEDE567B8D2 [29296.060344] wlp2s0: disconnect from AP 64DC9C6CBB364976DCA0FBEDE567B8D2 for new auth to 48A293BBD0456311299D96618706209D [29296.134783] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [29296.134801] wlp2s0: 80 MHz not supported, disabling VHT [29296.141370] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [29296.151209] wlp2s0: authenticated [29296.155431] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [29296.159477] wlp2s0: RX ReassocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [29296.173475] wlp2s0: associated [29317.083341] workqueue: delayed_fput hogged CPU for >10000us 8 times, consider switching to WQ_UNBOUND [29824.226009] workqueue: delayed_fput hogged CPU for >10000us 16 times, consider switching to WQ_UNBOUND [31303.343821] perf: interrupt took too long (6231 > 6215), lowering kernel.perf_event_max_sample_rate to 32000 [33408.265639] asus_wmi: Unknown key code 0xcf [35763.975899] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [35764.034645] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [35764.046732] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [35764.158518] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [35764.270627] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [35764.374308] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [35764.649983] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [35764.650030] wlp2s0: 80 MHz not supported, disabling VHT [35764.661470] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [35764.668048] wlp2s0: authenticated [35764.670919] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [35764.674988] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [35764.678510] wlp2s0: associated [35832.851904] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [35832.926858] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [35832.940167] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [35833.050739] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [35833.166317] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [35833.270588] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [35835.186342] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [35835.186384] wlp2s0: 80 MHz not supported, disabling VHT [35835.196691] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [35835.201523] wlp2s0: authenticated [35835.202556] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [35835.206790] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [35835.210322] wlp2s0: associated [35901.248073] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [35901.329068] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [35901.343293] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [35901.451007] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [35901.567015] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [35901.671163] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [35903.926595] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [35903.926631] wlp2s0: 80 MHz not supported, disabling VHT [35903.937051] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [35903.943418] wlp2s0: authenticated [35903.946983] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [35903.951097] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [35903.954711] wlp2s0: associated [36037.961181] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [36038.039681] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [36038.051646] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [36038.160182] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [36038.275705] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [36038.379989] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [36040.094721] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [36040.094742] wlp2s0: 80 MHz not supported, disabling VHT [36040.104024] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [36040.107815] wlp2s0: authenticated [36040.112054] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [36040.116200] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [36040.119570] wlp2s0: associated [36639.595678] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [36639.669452] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [36639.683013] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [36639.790553] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [36639.906300] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [36640.010674] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [36641.922081] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [36641.922126] wlp2s0: 80 MHz not supported, disabling VHT [36641.932939] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [36641.938895] wlp2s0: authenticated [36641.942486] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [36641.946507] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [36641.952915] wlp2s0: associated [38497.429752] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [38497.510139] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [38497.523239] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [38497.632621] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [38497.747957] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [38497.848728] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [38501.372343] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [38501.372382] wlp2s0: 80 MHz not supported, disabling VHT [38501.381867] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [38501.387223] wlp2s0: authenticated [38501.388481] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [38501.392523] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [38501.396166] wlp2s0: associated [39901.232581] wlp2s0: deauthenticating from 48A293BBD0456311299D96618706209D by local choice (Reason: 3=DEAUTH_LEAVING) [39901.589621] PM: suspend entry (deep) [39901.620755] Filesystems sync: 0.031 seconds [39901.640661] Freezing user space processes [39901.642781] Freezing user space processes completed (elapsed 0.002 seconds) [39901.642785] OOM killer disabled. [39901.642786] Freezing remaining freezable tasks [39901.644128] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [39901.644253] printk: Suspending console(s) (use no_console_suspend to debug) [39901.672436] sd 2:0:0:0: [sda] Synchronizing SCSI cache [39901.672619] sd 2:0:0:0: [sda] Stopping disk [39901.972824] ACPI: EC: interrupt blocked [39902.012513] ACPI: PM: Preparing to enter system sleep state S3 [39902.016237] ACPI: EC: event blocked [39902.016241] ACPI: EC: EC stopped [39902.016244] ACPI: PM: Saving platform NVS memory [39902.016437] Disabling non-boot CPUs ... [39902.018245] smpboot: CPU 1 is now offline [39902.023977] smpboot: CPU 2 is now offline [39902.026507] smpboot: CPU 3 is now offline [39902.031066] ACPI: PM: Low-level resume complete [39902.031120] ACPI: EC: EC started [39902.031121] ACPI: PM: Restoring platform NVS memory [39902.031878] Enabling non-boot CPUs ... [39902.031908] smpboot: Booting Node 0 Processor 1 APIC 0x2 [39902.035463] CPU1 is up [39902.035482] smpboot: Booting Node 0 Processor 2 APIC 0x1 [39902.036357] CPU2 is up [39902.036376] smpboot: Booting Node 0 Processor 3 APIC 0x3 [39902.037121] CPU3 is up [39902.039288] ACPI: PM: Waking up from system sleep state S3 [39902.054393] ACPI: EC: interrupt unblocked [39902.074342] ACPI: EC: event unblocked [39902.076459] xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit [39902.076468] usb usb1: root hub lost power or was reset [39902.076472] usb usb2: root hub lost power or was reset [39902.077893] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [39902.077901] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [39902.077907] i915 0000:00:02.0: [drm] [ENCODER:118:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [39902.376750] usb 1-6: reset high-speed USB device number 3 using xhci_hcd [39902.396536] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [39902.396671] ata1: SATA link down (SStatus 4 SControl 300) [39902.401019] ata3.00: configured for UDMA/133 [39902.411146] ahci 0000:00:17.0: port does not support device sleep [39902.653055] usb 1-8: reset full-speed USB device number 4 using xhci_hcd [39902.928813] usb 1-2: reset full-speed USB device number 2 using xhci_hcd [39903.091290] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [39903.093592] OOM killer enabled. [39903.093599] Restarting tasks ... [39903.096159] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [39903.097656] done. [39903.097671] random: crng reseeded on system resumption [39903.104430] pcieport 0000:00:1c.7: PCI bridge to [bus 02] pcieport 0000:00:1c.7: bridge window [mem 0xef000000-0xef0fffff] thermal thermal_zone5: failed to read out thermal zone (-61) [39903.121222] Bluetooth: hci0: Device revision is 5 [39903.121229] Bluetooth: hci0: Secure boot is enabled [39903.121230] Bluetooth: hci0: OTP lock is enabled [39903.121232] Bluetooth: hci0: API lock is enabled [39903.121233] Bluetooth: hci0: Debug lock is disabled [39903.121234] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [39903.125911] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [39903.131279] PM: suspend exit [39904.618427] Bluetooth: hci0: Waiting for firmware download to complete [39904.619295] Bluetooth: hci0: Firmware loaded in 1458357 usecs [39904.619374] Bluetooth: hci0: Waiting for device to boot [39904.631264] Bluetooth: hci0: Device booted in 11670 usecs [39904.631284] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [39904.631331] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [39904.635358] Bluetooth: hci0: Applying Intel DDC parameters completed [39904.636349] Bluetooth: hci0: Firmware revision 0.0 build 14 week 44 2021 [39904.638333] Bluetooth: hci0: Reading supported features failed (-16) [39904.638358] Bluetooth: hci0: Error reading debug features [39904.638370] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [39904.683737] Bluetooth: MGMT ver 1.22 [39907.057056] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [39907.065554] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [39907.071330] wlp2s0: authenticated [39907.072647] wlp2s0: associate with 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [39907.073718] wlp2s0: RX AssocResp from 64DC9C6CBB364976DCA0FBEDE567B8D2 (capab=0x11 status=0 aid=3) [39907.075950] wlp2s0: associated [39907.153751] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 64DC9C6CBB364976DCA0FBEDE567B8D2 [40066.880259] wlp2s0: disconnect from AP 64DC9C6CBB364976DCA0FBEDE567B8D2 for new auth to 48A293BBD0456311299D96618706209D [40066.959035] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [40066.959091] wlp2s0: 80 MHz not supported, disabling VHT [40066.968453] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [40066.976952] wlp2s0: authenticated [40066.978851] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [40066.983028] wlp2s0: RX ReassocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [40066.988402] wlp2s0: associated [40100.167176] workqueue: delayed_fput hogged CPU for >10000us 32 times, consider switching to WQ_UNBOUND [41382.396013] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [41382.471327] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [41382.484715] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [41382.594759] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [41382.710492] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [41382.814855] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [41383.082069] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [41383.082112] wlp2s0: 80 MHz not supported, disabling VHT [41383.091859] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [41383.097942] wlp2s0: authenticated [41383.102769] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [41383.107134] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [41383.110452] wlp2s0: associated [41449.164977] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [41449.235076] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [41449.248410] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [41449.359528] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [41449.474961] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [41449.575615] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [41453.107249] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [41453.107289] wlp2s0: 80 MHz not supported, disabling VHT [41453.117390] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [41453.123163] wlp2s0: authenticated [41453.127532] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [41453.131732] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [41453.134885] wlp2s0: associated [41517.769775] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [41517.839566] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [41517.853530] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [41517.960479] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [41518.076095] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [41518.180332] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [41520.436082] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [41520.436121] wlp2s0: 80 MHz not supported, disabling VHT [41520.445505] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [41520.451323] wlp2s0: authenticated [41520.452419] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [41520.456456] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=4) [41520.459786] wlp2s0: associated [43065.289381] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [43065.360424] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [43065.369333] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [43065.476817] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [43065.592117] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [43065.692789] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [43067.853498] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [43067.853561] wlp2s0: 80 MHz not supported, disabling VHT [43067.862591] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [43067.868391] wlp2s0: authenticated [43067.872759] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [43067.876936] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [43067.880805] wlp2s0: associated [44395.118680] asus_wmi: Unknown key code 0xcf [46068.126691] workqueue: delayed_fput hogged CPU for >10000us 64 times, consider switching to WQ_UNBOUND [59399.266631] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [59399.363028] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [59399.374692] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [59399.382802] wlp2s0: authenticated [59399.385382] wlp2s0: associate with 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [59399.386925] wlp2s0: RX ReassocResp from 64DC9C6CBB364976DCA0FBEDE567B8D2 (capab=0x11 status=0 aid=1) [59399.405331] wlp2s0: associated [59399.470788] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 64DC9C6CBB364976DCA0FBEDE567B8D2 [59516.494623] wlp2s0: disconnect from AP 64DC9C6CBB364976DCA0FBEDE567B8D2 for new auth to 48A293BBD0456311299D96618706209D [59516.570669] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [59516.570702] wlp2s0: 80 MHz not supported, disabling VHT [59516.580865] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [59516.590008] wlp2s0: authenticated [59516.593264] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [59516.597308] wlp2s0: RX ReassocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [59516.600029] wlp2s0: associated [62403.346024] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [62403.412206] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [62403.423087] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [62403.528731] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [62403.644188] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [62403.752638] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [62404.035983] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [62404.036031] wlp2s0: 80 MHz not supported, disabling VHT [62404.047377] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [62404.053041] wlp2s0: authenticated [62404.056552] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [62404.060677] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [62404.064129] wlp2s0: associated [62666.928960] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [62667.009731] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [62667.021352] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [62667.127779] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [62667.240313] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [62667.343857] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [62670.879120] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [62670.879160] wlp2s0: 80 MHz not supported, disabling VHT [62670.889413] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [62670.894039] wlp2s0: authenticated [62670.903751] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [62670.907929] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [62670.911307] wlp2s0: associated [62745.773572] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [62745.852226] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [62745.861604] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [62745.968326] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [62746.083753] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [62746.184494] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [62748.911905] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [62748.911946] wlp2s0: 80 MHz not supported, disabling VHT [62748.921938] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [62748.926533] wlp2s0: authenticated [62748.928485] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [62748.932532] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [62748.935850] wlp2s0: associated [64532.975450] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [64533.045760] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [64533.057116] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [64533.166168] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [64533.281506] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [64533.382132] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [64535.874075] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [64535.874124] wlp2s0: 80 MHz not supported, disabling VHT [64535.883055] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [64535.889381] wlp2s0: authenticated [64535.890296] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [64535.894323] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [64535.917145] wlp2s0: associated [65323.209109] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [65323.287900] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [65323.300984] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [65323.411832] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [65323.527194] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [65323.627817] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [65326.119395] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [65326.119433] wlp2s0: 80 MHz not supported, disabling VHT [65326.129168] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [65326.134210] wlp2s0: authenticated [65326.139862] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [65326.145938] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [65326.148999] wlp2s0: associated [67686.877993] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [67686.947111] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [67686.958417] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [67687.068876] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [67687.184372] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [67687.288742] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [67689.432490] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [67689.432537] wlp2s0: 80 MHz not supported, disabling VHT [67689.442477] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [67689.446976] wlp2s0: authenticated [67689.448786] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [67689.452980] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [67689.461865] wlp2s0: associated [77204.901020] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [77204.971439] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [77204.981437] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [77205.083805] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [77205.199496] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [77205.303976] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [77205.571421] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [77205.571471] wlp2s0: 80 MHz not supported, disabling VHT [77205.580832] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [77205.585456] wlp2s0: authenticated [77205.588139] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [77205.595456] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [77205.601868] wlp2s0: associated [77388.802295] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [77388.865682] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [77388.878706] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [77388.989535] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [77389.104752] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [77389.205530] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [77391.701330] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [77391.701414] wlp2s0: 80 MHz not supported, disabling VHT [77391.711632] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [77391.715436] wlp2s0: authenticated [77391.717403] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [77391.722369] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [77391.726951] wlp2s0: associated [77594.048540] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [77594.129259] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [77594.141800] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [77594.251410] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [77594.366854] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [77594.471361] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [77597.306869] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [77597.306916] wlp2s0: 80 MHz not supported, disabling VHT [77597.317016] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [77597.322840] wlp2s0: authenticated [77597.327231] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [77597.331480] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [77597.335151] wlp2s0: associated [78005.352077] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [78005.432599] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [78005.442979] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [78005.550851] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [78005.666472] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [78005.770905] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [78008.486928] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [78008.486974] wlp2s0: 80 MHz not supported, disabling VHT [78008.496098] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [78008.501560] wlp2s0: authenticated [78008.503705] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [78008.507848] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [78008.513154] wlp2s0: associated [83813.226895] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [83813.280434] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [83813.294021] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [83813.400202] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [83813.516003] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [83813.620328] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [83813.887577] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [83813.887625] wlp2s0: 80 MHz not supported, disabling VHT [83813.896421] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [83813.904178] wlp2s0: authenticated [83813.908203] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [83813.912207] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [83813.915427] wlp2s0: associated [83880.196873] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [83880.263012] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [83880.275669] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [83880.383636] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [83880.499077] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [83880.603536] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [83882.667105] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [83882.667149] wlp2s0: 80 MHz not supported, disabling VHT [83882.676818] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [83882.679859] wlp2s0: authenticated [83882.683896] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [83882.687959] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [83882.691240] wlp2s0: associated [83951.976014] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [83952.053697] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [83952.065072] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [83952.174947] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [83952.286695] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [83952.390972] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [83955.106491] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [83955.106526] wlp2s0: 80 MHz not supported, disabling VHT [83955.117182] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [83955.120693] wlp2s0: authenticated [83955.122758] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [83955.126854] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [83955.130320] wlp2s0: associated [84090.726684] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [84090.803561] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [84090.815251] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [84090.925436] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [84091.040972] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [84091.145510] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [84094.112558] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [84094.112594] wlp2s0: 80 MHz not supported, disabling VHT [84094.122018] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [84094.127061] wlp2s0: authenticated [84094.129329] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [84094.133410] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [84094.138619] wlp2s0: associated [84695.667347] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [84695.740534] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [84695.755275] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [84695.866214] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [84695.981723] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [84696.086243] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [84698.345667] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [84698.345702] wlp2s0: 80 MHz not supported, disabling VHT [84698.356141] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [84698.362144] wlp2s0: authenticated [84698.366093] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [84698.370756] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [84698.388623] wlp2s0: associated [86499.394484] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [86499.475426] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [86499.488490] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [86499.597101] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [86499.712571] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [86499.817299] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [86502.308617] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [86502.308658] wlp2s0: 80 MHz not supported, disabling VHT [86502.318234] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [86502.321890] wlp2s0: authenticated [86502.329073] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [86502.335722] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [86502.340802] wlp2s0: associated [88307.484984] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [88307.579974] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [88307.591419] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [88307.699872] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [88307.815351] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [88307.915866] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [88309.943563] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [88309.943608] wlp2s0: 80 MHz not supported, disabling VHT [88309.953082] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [88309.956731] wlp2s0: authenticated [88309.963838] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [88309.967971] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [88309.973255] wlp2s0: associated [90119.062448] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [90119.140083] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [90119.153311] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [90119.261375] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [90119.377018] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [90119.481276] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [90122.328929] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [90122.328971] wlp2s0: 80 MHz not supported, disabling VHT [90122.338793] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [90122.344299] wlp2s0: authenticated [90122.345257] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [90122.349272] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [90122.352819] wlp2s0: associated [91928.803114] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [91928.876454] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [91928.889456] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [91928.998152] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [91929.113653] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [91929.218045] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [91931.477496] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [91931.477532] wlp2s0: 80 MHz not supported, disabling VHT [91931.487653] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [91931.491716] wlp2s0: authenticated [91931.498026] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [91931.502313] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [91931.509162] wlp2s0: associated [93734.177556] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [93734.247699] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [93734.260812] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [93734.368716] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [93734.483911] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [93734.584760] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [93736.620391] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [93736.620433] wlp2s0: 80 MHz not supported, disabling VHT [93736.630876] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [93736.637257] wlp2s0: authenticated [93736.640634] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [93736.647270] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [93736.650404] wlp2s0: associated [95540.981726] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [95541.043436] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [95541.055627] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [95541.164296] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [95541.279589] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [95541.384306] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [95543.412059] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [95543.412106] wlp2s0: 80 MHz not supported, disabling VHT [95543.421850] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [95543.427280] wlp2s0: authenticated [95543.428427] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [95543.432518] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [95543.435628] wlp2s0: associated [97346.114941] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [97346.184812] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [97346.197154] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [97346.306143] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [97346.421617] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [97346.526109] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [97349.124620] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [97349.124647] wlp2s0: 80 MHz not supported, disabling VHT [97349.134847] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [97349.141607] wlp2s0: authenticated [97349.145943] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [97349.150159] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [97349.156746] wlp2s0: associated [99150.712832] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [99150.777838] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [99150.789995] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [99150.903444] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [99151.018775] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [99151.119471] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [99153.035457] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [99153.035506] wlp2s0: 80 MHz not supported, disabling VHT [99153.046162] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [99153.050973] wlp2s0: authenticated [99153.055511] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [99153.059527] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [99153.062646] wlp2s0: associated [100952.655161] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [100952.729122] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [100952.741079] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [100952.850161] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [100952.965856] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [100953.070186] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [100955.569743] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [100955.569786] wlp2s0: 80 MHz not supported, disabling VHT [100955.579788] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [100955.584334] wlp2s0: authenticated [100955.586096] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [100955.590203] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [100955.598170] wlp2s0: associated [102801.094876] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [102801.176313] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [102801.188510] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [102801.196543] wlp2s0: authenticated [102801.197714] wlp2s0: associate with 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [102801.198820] wlp2s0: RX ReassocResp from 64DC9C6CBB364976DCA0FBEDE567B8D2 (capab=0x11 status=0 aid=2) [102801.201048] wlp2s0: associated [102801.280289] wlp2s0: Limiting TX power to 23 (23 - 0) dBm as advertised by 64DC9C6CBB364976DCA0FBEDE567B8D2 [104278.568895] wlp2s0: disconnect from AP 64DC9C6CBB364976DCA0FBEDE567B8D2 for new auth to 48A293BBD0456311299D96618706209D [104278.646464] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [104278.646498] wlp2s0: 80 MHz not supported, disabling VHT [104278.657252] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [104278.664852] wlp2s0: authenticated [104278.667648] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [104278.671722] wlp2s0: RX ReassocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [104278.676081] wlp2s0: associated [104344.588845] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [104344.674191] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [104344.687054] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [104344.795512] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [104344.910863] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [104345.011539] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [104345.295048] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [104345.295096] wlp2s0: 80 MHz not supported, disabling VHT [104345.304572] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [104345.310137] wlp2s0: authenticated [104345.311524] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [104345.315632] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [104345.319033] wlp2s0: associated [104412.896784] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [104412.953261] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [104412.966614] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [104413.075572] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [104413.191241] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [104413.295718] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [104415.670757] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [104415.670798] wlp2s0: 80 MHz not supported, disabling VHT [104415.680519] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [104415.684350] wlp2s0: authenticated [104415.687451] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [104415.691448] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [104415.694332] wlp2s0: associated [104482.152789] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [104482.230634] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [104482.243520] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [104482.351461] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [104482.470699] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [104482.571376] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [104486.106918] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [104486.106961] wlp2s0: 80 MHz not supported, disabling VHT [104486.115752] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [104486.121061] wlp2s0: authenticated [104486.123552] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [104486.127558] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [104486.130706] wlp2s0: associated [104616.352507] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [104616.422874] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [104616.435733] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [104616.547342] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [104616.662907] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [104616.767345] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [104620.306914] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [104620.306957] wlp2s0: 80 MHz not supported, disabling VHT [104620.315823] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [104620.321600] wlp2s0: authenticated [104620.323202] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [104620.327226] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [104620.330206] wlp2s0: associated [105248.783556] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [105248.869613] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [105248.881853] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [105248.994397] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [105249.109850] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [105249.214400] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [105252.745701] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [105252.745745] wlp2s0: 80 MHz not supported, disabling VHT [105252.756305] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [105252.760914] wlp2s0: authenticated [105252.762217] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [105252.766266] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [105252.769289] wlp2s0: associated [107058.102608] wlp2s0: disconnect from AP 48A293BBD0456311299D96618706209D for new auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 [107058.192027] wlp2s0: authenticate with 64DC9C6CBB364976DCA0FBEDE567B8D2 [107058.201081] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 1/3) [107058.309129] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 2/3) [107058.424472] wlp2s0: send auth to 64DC9C6CBB364976DCA0FBEDE567B8D2 (try 3/3) [107058.525200] wlp2s0: authentication with 64DC9C6CBB364976DCA0FBEDE567B8D2 timed out [107062.056741] wlp2s0: authenticate with 48A293BBD0456311299D96618706209D [107062.056784] wlp2s0: 80 MHz not supported, disabling VHT [107062.067315] wlp2s0: send auth to 48A293BBD0456311299D96618706209D (try 1/3) [107062.071357] wlp2s0: authenticated [107062.073258] wlp2s0: associate with 48A293BBD0456311299D96618706209D (try 1/3) [107062.077244] wlp2s0: RX AssocResp from 48A293BBD0456311299D96618706209D (capab=0x411 status=0 aid=3) [107062.083955] wlp2s0: associated [108310.534514] wlp2s0: deauthenticating from 48A293BBD0456311299D96618706209D by local choice (Reason: 3=DEAUTH_LEAVING) [108310.869267] PM: suspend entry (deep)


Hardware for Linux and BSD

GitHub