[ 5.368568] Linux version 6.17.5-arch1-1 (XXX@XXX) (gcc (GCC) 15.2.1 20250813, GNU ld (GNU Binutils) 2.45.0) #1 SMP PREEMPT_DYNAMIC Thu, 23 Oct 2025 18:49:03 +0000 [ 5.368657] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=HASH_F60-89A1-6640-FDBC-7A13E2493A0B rw rootfstype=btrfs loglevel=2 [ 5.368678] BIOS-provided physical RAM map: [ 5.368692] BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable [ 5.368708] BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved [ 5.368726] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable [ 5.368743] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved [ 5.368759] BIOS-e820: [mem 0x0000000000100000-0x0000000009afffff] usable [ 5.368773] BIOS-e820: [mem 0x0000000009b00000-0x0000000009dfffff] reserved [ 5.368789] BIOS-e820: [mem 0x0000000009e00000-0x0000000009efffff] usable [ 5.368805] BIOS-e820: [mem 0x0000000009f00000-0x0000000009f0afff] ACPI NVS [ 5.368817] BIOS-e820: [mem 0x0000000009f0b000-0x00000000970f8fff] usable [ 5.368832] BIOS-e820: [mem 0x00000000970f9000-0x0000000097af8fff] reserved [ 5.368848] BIOS-e820: [mem 0x0000000097af9000-0x00000000add0efff] usable [ 5.368866] BIOS-e820: [mem 0x00000000add0f000-0x00000000ae0defff] type 20 [ 5.368884] BIOS-e820: [mem 0x00000000ae0df000-0x00000000aee8efff] reserved [ 5.368901] BIOS-e820: [mem 0x00000000aee8f000-0x00000000af77efff] ACPI NVS [ 5.368920] BIOS-e820: [mem 0x00000000af77f000-0x00000000af7fefff] ACPI data [ 5.368936] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable [ 5.368954] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved [ 5.368971] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 5.368988] BIOS-e820: [mem 0x00000000fdc00000-0x00000000fec00fff] reserved [ 5.369018] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 5.369031] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 5.369048] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 5.369065] BIOS-e820: [mem 0x00000000ff800000-0x00000000fff3ffff] reserved [ 5.369083] BIOS-e820: [mem 0x0000000100000000-0x000000020effffff] usable [ 5.369101] BIOS-e820: [mem 0x000000020f000000-0x000000024effffff] reserved [ 5.369114] NX (Execute Disable) protection: active [ 5.369131] APIC: Static calls initialized [ 5.369148] efi: EFI v2.7 by HUAWEI [ 5.369169] efi: ACPI=0xaf7fe000 ACPI 2.0=0xaf7fe014 TPMFinalLog=0xaf358000 SMBIOS=0xae2e0000 SMBIOS 3.0=0xae2de000 ESRT=0xae2dc018 MEMATTR=0x9e56b018 [ 5.369187] efi: Remove mem57: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 5.369203] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 5.369219] efi: Remove mem58: MMIO range=[0xfdc00000-0xfec00fff] (16MB) from e820 map [ 5.369236] e820: remove [mem 0xfdc00000-0xfec00fff] reserved [ 5.369253] efi: Not removing mem59: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map [ 5.369266] efi: Not removing mem60: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map [ 5.369283] efi: Not removing mem61: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 5.369294] efi: Remove mem62: MMIO range=[0xff800000-0xfff3ffff] (7MB) from e820 map [ 5.369308] e820: remove [mem 0xff800000-0xfff3ffff] reserved [ 5.369320] SMBIOS 3.11.1 present. [ 5.369332] DMI: HUAWEI NBLK-WAX9X/NBLK-WAX9X-PCB, BIOS 1.19 01/06/2023 [ 5.369341] DMI: Memory slots populated: 2/2 [ 5.369354] tsc: Fast TSC calibration using PIT [ 5.369368] tsc: Detected 2096.007 MHz processor [ 5.369387] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 5.369412] e820: remove [mem 0x000a0000-0x000fffff] usable [ 5.369435] last_pfn = 0x20f000 max_arch_pfn = 0x400000000 [ 5.369458] MTRR map: 7 entries (4 fixed + 3 variable; max 21), built from 9 variable MTRRs [ 5.369474] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 5.369493] last_pfn = 0xaf800 max_arch_pfn = 0x400000000 [ 5.369506] esrt: Reserving ESRT space from 0x00000000ae2dc018 to 0x00000000ae2dc050. [ 5.369522] Using GB pages for direct mapping [ 5.369539] Secure boot disabled [ 5.369554] RAMDISK: [mem 0x3313f000-0x35896fff] ACPI: Early table checksum verification disabled [ 5.369595] ACPI: RSDP 0x00000000AF7FE014 000024 (v02 HUAWEI) [ 5.369614] ACPI: XSDT 0x00000000AF7CA188 0000F4 (v01 HUAWEI EDK2 00000002 01000013) [ 5.369633] ACPI: FACP 0x00000000AF7F3000 00010C (v05 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369651] ACPI: DSDT 0x00000000AF7E2000 00A2F9 (v01 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369666] ACPI: FACS 0x00000000AF357000 000040 [ 5.369679] ACPI: UEFI 0x00000000AF77D000 000236 (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.369695] ACPI: SSDT 0x00000000AF7F7000 005419 (v02 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369710] ACPI: MSDM 0x00000000AF7F6000 000055 (v03 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.369730] ACPI: ASF! 0x00000000AF7F5000 0000A5 (v32 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369743] ACPI: BOOT 0x00000000AF7F4000 000028 (v01 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369757] ACPI: HPET 0x00000000AF7F2000 000038 (v01 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369770] ACPI: APIC 0x00000000AF7F1000 000138 (v03 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369788] ACPI: MCFG 0x00000000AF7F0000 00003C (v01 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369816] ACPI: WSMT 0x00000000AF7ED000 000028 (v01 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369836] ACPI: SSDT 0x00000000AF7E1000 000080 (v01 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369858] ACPI: VFCT 0x00000000AF7D2000 00D484 (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.369880] ACPI: SSDT 0x00000000AF7D1000 00046D (v01 HUAWEI EDK2 00001000 ACPI 00040000) [ 5.369900] ACPI: TPM2 0x00000000AF7D0000 000034 (v04 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.369920] ACPI: IVRS 0x00000000AF7CF000 00013E (v02 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.369933] ACPI: SSDT 0x00000000AF7CD000 00119C (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.369951] ACPI: CRAT 0x00000000AF7CC000 000810 (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.369965] ACPI: CDIT 0x00000000AF7CB000 000029 (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.369983] ACPI: SSDT 0x00000000AF7FD000 000A26 (v01 HUAWEI EDK2 00001000 ACPI 00040000) [ 5.370011] ACPI: SSDT 0x00000000AF7C9000 000C77 (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.370034] ACPI: SSDT 0x00000000AF7C7000 0010A5 (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.370056] ACPI: SSDT 0x00000000AF7C5000 001C69 (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.370071] ACPI: FPDT 0x00000000AF7C4000 000044 (v01 HUAWEI EDK2 00000002 ACPI 00040000) [ 5.370085] ACPI: SSDT 0x00000000AF7EF000 000164 (v01 HUAWEI EDK2 00001000 ACPI 00040000) [ 5.370098] ACPI: SSDT 0x00000000AF7EE000 0002EA (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.370112] ACPI: BGRT 0x00000000AF7C3000 000038 (v01 HUAWEI EDK2 00000001 ACPI 00040000) [ 5.370130] ACPI: Reserving FACP table memory at [mem 0xaf7f3000-0xaf7f310b] ACPI: Reserving DSDT table memory at [mem 0xaf7e2000-0xaf7ec2f8] ACPI: Reserving FACS table memory at [mem 0xaf357000-0xaf35703f] ACPI: Reserving UEFI table memory at [mem 0xaf77d000-0xaf77d235] ACPI: Reserving SSDT table memory at [mem 0xaf7f7000-0xaf7fc418] ACPI: Reserving MSDM table memory at [mem 0xaf7f6000-0xaf7f6054] ACPI: Reserving ASF! table memory at [mem 0xaf7f5000-0xaf7f50a4] ACPI: Reserving BOOT table memory at [mem 0xaf7f4000-0xaf7f4027] ACPI: Reserving HPET table memory at [mem 0xaf7f2000-0xaf7f2037] ACPI: Reserving APIC table memory at [mem 0xaf7f1000-0xaf7f1137] ACPI: Reserving MCFG table memory at [mem 0xaf7f0000-0xaf7f003b] ACPI: Reserving WSMT table memory at [mem 0xaf7ed000-0xaf7ed027] ACPI: Reserving SSDT table memory at [mem 0xaf7e1000-0xaf7e107f] ACPI: Reserving VFCT table memory at [mem 0xaf7d2000-0xaf7df483] ACPI: Reserving SSDT table memory at [mem 0xaf7d1000-0xaf7d146c] ACPI: Reserving TPM2 table memory at [mem 0xaf7d0000-0xaf7d0033] ACPI: Reserving IVRS table memory at [mem 0xaf7cf000-0xaf7cf13d] ACPI: Reserving SSDT table memory at [mem 0xaf7cd000-0xaf7ce19b] ACPI: Reserving CRAT table memory at [mem 0xaf7cc000-0xaf7cc80f] ACPI: Reserving CDIT table memory at [mem 0xaf7cb000-0xaf7cb028] ACPI: Reserving SSDT table memory at [mem 0xaf7fd000-0xaf7fda25] ACPI: Reserving SSDT table memory at [mem 0xaf7c9000-0xaf7c9c76] ACPI: Reserving SSDT table memory at [mem 0xaf7c7000-0xaf7c80a4] ACPI: Reserving SSDT table memory at [mem 0xaf7c5000-0xaf7c6c68] ACPI: Reserving FPDT table memory at [mem 0xaf7c4000-0xaf7c4043] ACPI: Reserving SSDT table memory at [mem 0xaf7ef000-0xaf7ef163] ACPI: Reserving SSDT table memory at [mem 0xaf7ee000-0xaf7ee2e9] ACPI: Reserving BGRT table memory at [mem 0xaf7c3000-0xaf7c3037] No NUMA configuration found [ 5.370513] Faking a node at [mem 0x0000000000000000-0x000000020effffff] NODE_DATA(0) allocated [mem 0x20efd52c0-0x20effffff] Zone ranges: [ 5.370560] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000020effffff] Device empty [ 5.370622] Movable zone start for each node [ 5.370632] Early memory node ranges [ 5.370645] node 0: [mem 0x0000000000001000-0x0000000000086fff] node 0: [mem 0x0000000000088000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x0000000009afffff] node 0: [mem 0x0000000009e00000-0x0000000009efffff] node 0: [mem 0x0000000009f0b000-0x00000000970f8fff] node 0: [mem 0x0000000097af9000-0x00000000add0efff] node 0: [mem 0x00000000af7ff000-0x00000000af7fffff] node 0: [mem 0x0000000100000000-0x000000020effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000020effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 5.370774] On node 0, zone DMA: 1 pages in unavailable ranges [ 5.370784] On node 0, zone DMA: 96 pages in unavailable ranges [ 5.370801] On node 0, zone DMA32: 768 pages in unavailable ranges [ 5.370812] On node 0, zone DMA32: 11 pages in unavailable ranges [ 5.370825] On node 0, zone DMA32: 2560 pages in unavailable ranges [ 5.370838] On node 0, zone DMA32: 6896 pages in unavailable ranges [ 5.370856] On node 0, zone Normal: 2048 pages in unavailable ranges [ 5.370870] On node 0, zone Normal: 4096 pages in unavailable ranges [ 5.370881] ACPI: PM-Timer IO Port: 0x408 [ 5.370894] CPU topo: Ignoring hot-pluggable APIC ID 0 in present package. [ 5.370907] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 5.370923] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 5.370938] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 5.370949] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 5.370962] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 5.370972] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 5.370982] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 5.370998] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 5.371025] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 5.371038] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 5.371051] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 5.371061] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 5.371071] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 5.371089] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 5.371105] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 5.371115] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 5.371129] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23 [ 5.371143] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55 [ 5.371153] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 5.371167] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 5.371177] ACPI: Using ACPI (MADT) for SMP configuration information [ 5.371190] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 5.371201] e820: update [mem 0x9e532000-0x9e55afff] usable ==> reserved [ 5.371217] CPU topo: Max. logical packages: 1 [ 5.371230] CPU topo: Max. logical dies: 1 [ 5.371248] CPU topo: Max. dies per package: 1 [ 5.371259] CPU topo: Max. threads per core: 2 [ 5.371272] CPU topo: Num. cores per package: 4 [ 5.371287] CPU topo: Num. threads per package: 8 [ 5.371297] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 5.371307] CPU topo: Rejected CPUs 8 [ 5.371317] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00087000-0x00087fff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x09b00000-0x09dfffff] PM: hibernation: Registered nosave memory: [mem 0x09f00000-0x09f0afff] PM: hibernation: Registered nosave memory: [mem 0x970f9000-0x97af8fff] PM: hibernation: Registered nosave memory: [mem 0x9e532000-0x9e55afff] PM: hibernation: Registered nosave memory: [mem 0xadd0f000-0xaf7fefff] PM: hibernation: Registered nosave memory: [mem 0xaf800000-0xffffffff] [mem 0xb0000000-0xfec0ffff] available for PCI devices [ 5.371446] Booting paravirtualized kernel on bare hardware [ 5.371465] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 5.371479] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 5.371489] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144 [ 5.371503] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152 [ 5.371519] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 5.371530] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=HASH_F60-89A1-6640-FDBC-7A13E2493A0B rw rootfstype=btrfs loglevel=2 [ 5.371547] random: crng init done [ 5.371558] printk: log buffer XXXX + meta XXXX: 131072 + 458752 = 589824 bytes [ 5.371569] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 5.371582] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 5.371596] software IO TLB: area num 8. [ 5.371612] Fallback order for Node 0: 0 [ 5.371626] Built 1 zonelists, mobility grouping on. Total pages: 1818531 [ 5.371639] Policy zone: Normal [ 5.371649] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 5.371663] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 5.371676] ftrace: allocating 56531 entries in 224 pages [ 5.371687] ftrace: allocated 224 pages with 3 groups [ 5.371703] Dynamic Preempt: full [ 5.371716] rcu: Preemptible hierarchical RCU implementation. [ 5.371729] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 5.371743] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 5.371758] Trampoline variant of Tasks RCU enabled. [ 5.371769] Rude variant of Tasks RCU enabled. [ 5.371780] Tracing variant of Tasks RCU enabled. [ 5.371790] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 5.371801] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 5.371811] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 5.371822] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 5.371836] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 5.371852] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 5.371867] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 5.371878] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 5.371889] Console: colour dummy device 80x25 [ 5.371900] printk: legacy console [tty0] enabled [ 5.371913] ACPI: Core revision 20250404 [ 5.371924] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 5.371938] APIC: Switch to symmetric I/O mode setup [ 5.371952] AMD-Vi: ivrs, add hid:PNP0D40, uid:, rdevid:0x98 [ 5.371963] AMD-Vi: Using global IVHD EFR:0x4f77ef22294ada, EFR2:0x0 [ 5.371976] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 5.371986] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e36749a135, max_idle_ns: 440795280167 ns [ 5.371997] Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.01 BogoMIPS (lpj=2096007) [ 5.372035] AMD Zen1 DIV0 bug detected. Disable SMT for full protection. [ 5.372049] LVT offset 1 assigned for vector 0xf9 [ 5.372060] LVT offset 2 assigned for vector 0xf4 [ 5.372070] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 5.372084] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 5.372095] process: using mwait in idle threads [ 5.372111] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto [ 5.372121] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 5.372132] Spectre V2 : Mitigation: Retpolines [ 5.372143] RETBleed: Mitigation: untrained return thunk [ 5.372154] Speculative Return Stack Overflow: Mitigation: Safe RET [ 5.372168] VMSCAPE: Mitigation: IBPB before exit to userspace [ 5.372178] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 5.372189] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 5.372202] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 5.372215] active return thunk: retbleed_return_thunk [ 5.372226] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 5.372236] active return thunk: srso_return_thunk [ 5.372247] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 5.372263] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 5.372274] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 5.372287] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 5.372298] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 5.372310] Freeing SMP alternatives memory: 56K [ 5.372321] pid_max: default: 32768 minimum: 301 [ 5.372334] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf [ 5.372345] landlock: Up and running. [ 5.372360] Yama: becoming mindful. [ 5.372371] LSM support for eBPF active [ 5.372382] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 5.372393] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 5.372403] smpboot: CPU0: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x18, stepping: 0x1) [ 5.372418] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 5.372429] ... version: 0 [ 5.372439] ... bit width: 48 [ 5.372450] ... generic registers: 6 [ 5.372463] ... value mask: 0000ffffffffffff [ 5.372474] ... max period: 00007fffffffffff [ 5.372484] ... fixed-purpose events: 0 [ 5.372498] ... event mask: 000000000000003f [ 5.372509] signal: max sigframe size: 1776 [ 5.372524] rcu: Hierarchical SRCU implementation. [ 5.372535] rcu: Max phase no-delay instances is 400. [ 5.372552] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 5.372563] MCE: In-kernel MCE decoding enabled. [ 5.372573] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 5.372584] smp: Bringing up secondary CPUs ... [ 5.372597] smpboot: x86: Booting SMP configuration: [ 5.372611] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 5.372622] VMSCAPE: SMT on, STIBP is required for full protection. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/vmscape.html for more details. [ 5.372635] smp: Brought up 1 node, 8 CPUs [ 5.372646] smpboot: Total of 8 processors activated (33536.11 BogoMIPS) [ 5.372658] Memory: 6960376K/7274124K available (20077K kernel code, 2945K rwdata, 16840K rodata, 4692K init, 4868K bss, 296336K reserved, 0K cma-reserved) [ 5.372668] devtmpfs: initialized [ 5.372682] x86/mm: Memory block size: 128MB [ 5.372692] ACPI: PM: Registering ACPI NVS region [mem 0x09f00000-0x09f0afff] (45056 bytes) [ 5.372703] ACPI: PM: Registering ACPI NVS region [mem 0xaee8f000-0xaf77efff] (9371648 bytes) [ 5.372713] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 5.372726] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 5.372737] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear). [ 5.372747] pinctrl core: initialized pinctrl subsystem [ 5.372758] PM: RTC time: 00:49:08, date: 2025-10-29 [ 5.372769] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 5.372780] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 5.372790] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 5.372801] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 5.372839] thermal_sys: Registered thermal governor 'fair_share' [ 5.372849] thermal_sys: Registered thermal governor 'bang_bang' [ 5.372860] thermal_sys: Registered thermal governor 'step_wise' [ 5.372871] thermal_sys: Registered thermal governor 'user_space' [ 5.372884] thermal_sys: Registered thermal governor 'power_allocator' [ 5.372895] cpuidle: using governor ladder [ 5.372906] cpuidle: using governor menu [ 5.372917] Simple Boot Flag at 0x44 set to 0x80 [ 5.372930] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 5.372940] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] PCI: Using configuration type 1 for base access [ 5.372965] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 5.372976] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 5.372986] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 5.372996] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 5.373017] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 5.373027] raid6: skipped pq benchmark and selected avx2x4 [ 5.373038] raid6: using avx2x2 recovery algorithm [ 5.373052] ACPI: Added _OSI(Module Device) [ 5.373063] ACPI: Added _OSI(Processor Device) [ 5.373073] ACPI: Added _OSI(Processor Aggregator Device) [ 5.373084] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 5.373095] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 5.373106] ACPI: EC: EC started [ 5.373119] ACPI: EC: interrupt blocked [ 5.373133] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 5.373144] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions [ 5.373157] ACPI: Interpreter enabled [ 5.373171] ACPI: PM: (supports S0 S3 S4 S5) [ 5.373182] ACPI: Using IOAPIC for interrupt routing [ 5.373192] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 5.373203] PCI: Ignoring E820 reservations for host bridge windows [ 5.373214] ACPI: Enabled 4 GPEs in block 00 to 1F [ 5.373224] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 5.373530] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge [ 5.374432] PCI host bridge to bus 0000:00 [ 5.374724] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xf7ffffff window] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 conventional PCI endpoint [ 5.377454] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 conventional PCI endpoint [ 5.377752] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint [ 5.378126] pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400 PCIe Root Port [ 5.378435] pci 0000:00:01.3: PCI bridge to [bus 01] pci 0000:00:01.3: bridge window [mem 0xc0700000-0xc07fffff] pci 0000:00:01.3: enabling Extended Tags [ 5.379351] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 5.379606] pci 0000:00:01.7: [1022:15d3] type 01 class 0x060400 PCIe Root Port [ 5.379844] pci 0000:00:01.7: PCI bridge to [bus 02] pci 0000:00:01.7: bridge window [io 0x2000-0x2fff] pci 0000:00:01.7: bridge window [mem 0xc0600000-0xc06fffff] pci 0000:00:01.7: enabling Extended Tags [ 5.380802] pci 0000:00:01.7: PME# supported from D0 D3hot D3cold [ 5.381171] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 conventional PCI endpoint [ 5.381410] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 PCIe Root Port [ 5.381646] pci 0000:00:08.1: PCI bridge to [bus 03] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff] pci 0000:00:08.1: bridge window [mem 0xc0200000-0xc05fffff] pci 0000:00:08.1: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] pci 0000:00:08.1: enabling Extended Tags [ 5.382831] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 5.383101] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint [ 5.383420] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint [ 5.383703] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 conventional PCI endpoint [ 5.383941] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 conventional PCI endpoint [ 5.384191] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 conventional PCI endpoint [ 5.384431] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 conventional PCI endpoint [ 5.384661] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 conventional PCI endpoint [ 5.384944] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 conventional PCI endpoint [ 5.385273] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 conventional PCI endpoint [ 5.385572] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 conventional PCI endpoint [ 5.385899] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802 PCIe Endpoint [ 5.386270] pci 0000:01:00.0: BAR 0 [mem 0xc0700000-0xc0703fff 64bit] pci 0000:00:01.3: PCI bridge to [bus 01] pci 0000:02:00.0: [10ec:c822] type 00 class 0x028000 PCIe Endpoint [ 5.387220] pci 0000:02:00.0: BAR 0 [io 0x2000-0x20ff] pci 0000:02:00.0: BAR 2 [mem 0xc0600000-0xc060ffff 64bit] pci 0000:02:00.0: supports D1 D2 [ 5.388303] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.388612] pci 0000:00:01.7: PCI bridge to [bus 02] pci 0000:03:00.0: [1002:15d8] type 00 class 0x030000 PCIe Legacy Endpoint [ 5.389298] pci 0000:03:00.0: BAR 0 [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:03:00.0: BAR 2 [mem 0xc0000000-0xc01fffff 64bit pref] pci 0000:03:00.0: BAR 4 [io 0x1000-0x10ff] pci 0000:03:00.0: BAR 5 [mem 0xc0500000-0xc057ffff] pci 0000:03:00.0: enabling Extended Tags [ 5.390582] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 5.390841] pci 0000:03:00.1: [1002:15de] type 00 class 0x040300 PCIe Legacy Endpoint [ 5.391089] pci 0000:03:00.1: BAR 0 [mem 0xc05c8000-0xc05cbfff] pci 0000:03:00.1: enabling Extended Tags [ 5.391566] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold [ 5.391807] pci 0000:03:00.2: [1022:15df] type 00 class 0x108000 PCIe Endpoint [ 5.392059] pci 0000:03:00.2: BAR 2 [mem 0xc0400000-0xc04fffff] pci 0000:03:00.2: BAR 5 [mem 0xc05cc000-0xc05cdfff] pci 0000:03:00.2: enabling Extended Tags [ 5.392882] pci 0000:03:00.3: [1022:15e0] type 00 class 0x0c0330 PCIe Endpoint [ 5.393189] pci 0000:03:00.3: BAR 0 [mem 0xc0300000-0xc03fffff 64bit] pci 0000:03:00.3: enabling Extended Tags [ 5.393679] pci 0000:03:00.3: PME# supported from D0 D3hot D3cold [ 5.393940] pci 0000:03:00.4: [1022:15e1] type 00 class 0x0c0330 PCIe Endpoint [ 5.394203] pci 0000:03:00.4: BAR 0 [mem 0xc0200000-0xc02fffff 64bit] pci 0000:03:00.4: enabling Extended Tags [ 5.394703] pci 0000:03:00.4: PME# supported from D0 D3hot D3cold [ 5.394943] pci 0000:03:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint [ 5.395192] pci 0000:03:00.5: BAR 0 [mem 0xc0580000-0xc05bffff] pci 0000:03:00.5: enabling Extended Tags [ 5.395683] pci 0000:03:00.5: PME# supported from D0 D3hot D3cold [ 5.395969] pci 0000:03:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint [ 5.396275] pci 0000:03:00.6: BAR 0 [mem 0xc05c0000-0xc05c7fff] pci 0000:03:00.6: enabling Extended Tags [ 5.396769] pci 0000:03:00.6: PME# supported from D0 D3hot D3cold [ 5.397012] pci 0000:00:08.1: PCI bridge to [bus 03] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 5.397050] ACPI: PCI: Interrupt link LNKA disabled [ 5.397062] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 5.397077] ACPI: PCI: Interrupt link LNKB disabled [ 5.397097] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 5.397115] ACPI: PCI: Interrupt link LNKC disabled [ 5.397137] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 5.397149] ACPI: PCI: Interrupt link LNKD disabled [ 5.397163] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 5.397176] ACPI: PCI: Interrupt link LNKE disabled [ 5.397188] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 5.397200] ACPI: PCI: Interrupt link LNKF disabled [ 5.397213] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 5.397225] ACPI: PCI: Interrupt link LNKG disabled [ 5.397237] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 5.397253] ACPI: PCI: Interrupt link LNKH disabled [ 5.397264] ACPI: EC: interrupt unblocked [ 5.397276] ACPI: EC: event unblocked [ 5.397289] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 5.397301] ACPI: EC: GPE=0x3 [ 5.397314] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete [ 5.397326] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events [ 5.397339] iommu: Default domain type: Translated [ 5.397354] iommu: DMA domain TLB invalidation policy: lazy mode [ 5.397367] SCSI subsystem initialized [ 5.397380] libata version 3.00 loaded. [ 5.397392] ACPI: bus type USB registered [ 5.397403] usbcore: registered new interface driver usbfs [ 5.397414] usbcore: registered new interface driver hub [ 5.397425] usbcore: registered new device driver usb [ 5.397436] EDAC MC: Ver: 3.0.0 [ 5.397448] efivars: Registered efivars operations [ 5.397460] NetLabel: Initializing [ 5.397471] NetLabel: domain hash size = 128 [ 5.397483] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 5.397498] NetLabel: unlabeled traffic allowed by default [ 5.397510] mctp: management component transport protocol core [ 5.397521] NET: Registered PF_MCTP protocol family [ 5.397534] PCI: Using ACPI for IRQ routing [ 5.397545] PCI: pci_cache_line_size set to 64 bytes [ 5.397557] e820: reserve RAM buffer [mem 0x00087000-0x0008ffff] e820: reserve RAM buffer [mem 0x09b00000-0x0bffffff] e820: reserve RAM buffer [mem 0x09f00000-0x0bffffff] e820: reserve RAM buffer [mem 0x970f9000-0x97ffffff] e820: reserve RAM buffer [mem 0x9e532000-0x9fffffff] e820: reserve RAM buffer [mem 0xadd0f000-0xafffffff] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff] e820: reserve RAM buffer [mem 0x20f000000-0x20fffffff] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 5.398180] pci 0000:03:00.0: vgaarb: bridge control possible [ 5.398428] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 5.398443] vgaarb: loaded [ 5.398455] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 5.398466] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 5.398483] clocksource: Switched to clocksource tsc-early [ 5.398495] VFS: Disk quotas dquot_6.6.0 [ 5.398512] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.398524] pnp: PnP ACPI init [ 5.398755] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 5.398980] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 5.399218] system 00:00: [mem 0xfde00000-0xfdefffff] has been reserved [ 5.399511] system 00:03: [io 0x0400-0x04cf] has been reserved [ 5.399792] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 5.400080] system 00:03: [io 0x04d6] has been reserved [ 5.400355] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 5.400622] system 00:03: [io 0x0c14] has been reserved [ 5.400888] system 00:03: [io 0x0c50-0x0c52] has been reserved [ 5.401172] system 00:03: [io 0x0c6c] has been reserved [ 5.401406] system 00:03: [io 0x0c6f] has been reserved [ 5.401629] system 00:03: [io 0x0cd0-0x0cdb] has been reserved [ 5.401859] system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved [ 5.402091] system 00:04: [mem 0xff800000-0xffffffff] has been reserved [ 5.402108] pnp: PnP ACPI: found 5 devices [ 5.402121] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 5.402133] NET: Registered PF_INET protocol family [ 5.402145] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 5.402157] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 5.402173] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 5.402185] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 5.402201] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 5.402213] TCP: Hash tables configured (established 65536 bind 65536) [ 5.402224] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 5.402237] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 5.402249] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 5.402260] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 5.402272] NET: Registered PF_XDP protocol family [ 5.402519] pci 0000:00:01.3: PCI bridge to [bus 01] pci 0000:00:01.3: bridge window [mem 0xc0700000-0xc07fffff] pci 0000:00:01.7: PCI bridge to [bus 02] pci 0000:00:01.7: bridge window [io 0x2000-0x2fff] pci 0000:00:01.7: bridge window [mem 0xc0600000-0xc06fffff] pci 0000:00:08.1: PCI bridge to [bus 03] pci 0000:00:08.1: bridge window [io 0x1000-0x1fff] pci 0000:00:08.1: bridge window [mem 0xc0200000-0xc05fffff] pci 0000:00:08.1: bridge window [mem 0xb0000000-0xc01fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window] pci_bus 0000:00: resource 9 [mem 0xb0000000-0xf7ffffff window] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0xc0200000-0xc05fffff] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 [ 5.407918] pci 0000:03:00.3: extending delay after power-on from D3hot to 20 msec [ 5.408176] pci 0000:03:00.4: extending delay after power-on from D3hot to 20 msec [ 5.408425] pci 0000:03:00.4: quirk_usb_early_handoff+0x0/0x760 took 15410 usecs [ 5.408442] PCI: CLS 64 bytes, default 64 [ 5.408669] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 5.408686] Trying to unpack rootfs image as initramfs... [ 5.408912] pci 0000:00:01.0: Adding to iommu group 0 [ 5.409161] pci 0000:00:01.3: Adding to iommu group 1 [ 5.409390] pci 0000:00:01.7: Adding to iommu group 2 [ 5.409619] pci 0000:00:08.0: Adding to iommu group 3 [ 5.409853] pci 0000:00:08.1: Adding to iommu group 4 [ 5.410091] pci 0000:00:14.0: Adding to iommu group 5 [ 5.410325] pci 0000:00:14.3: Adding to iommu group 5 [ 5.410559] pci 0000:00:18.0: Adding to iommu group 6 [ 5.410791] pci 0000:00:18.1: Adding to iommu group 6 [ 5.411045] pci 0000:00:18.2: Adding to iommu group 6 [ 5.411293] pci 0000:00:18.3: Adding to iommu group 6 [ 5.411534] pci 0000:00:18.4: Adding to iommu group 6 [ 5.411763] pci 0000:00:18.5: Adding to iommu group 6 [ 5.411993] pci 0000:00:18.6: Adding to iommu group 6 [ 5.412274] pci 0000:00:18.7: Adding to iommu group 6 [ 5.412540] pci 0000:01:00.0: Adding to iommu group 7 [ 5.412811] pci 0000:02:00.0: Adding to iommu group 8 [ 5.413092] pci 0000:03:00.0: Adding to iommu group 9 [ 5.413336] pci 0000:03:00.1: Adding to iommu group 10 [ 5.413585] pci 0000:03:00.2: Adding to iommu group 10 [ 5.413843] pci 0000:03:00.3: Adding to iommu group 10 [ 5.414110] pci 0000:03:00.4: Adding to iommu group 10 [ 5.414359] pci 0000:03:00.5: Adding to iommu group 10 [ 5.414602] pci 0000:03:00.6: Adding to iommu group 10 [ 5.414619] AMD-Vi: Extended features (0x4f77ef22294ada, 0x0): PPR NX GT IA GA PC GA_vAPIC [ 5.414631] AMD-Vi: Interrupt remapping enabled [ 5.414644] AMD-Vi: Virtual APIC enabled [ 5.414666] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 5.414679] software IO TLB: mapped [mem 0x00000000a93e4000-0x00000000ad3e4000] (64MB) [ 5.414691] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 5.414703] Initialise system trusted keyrings [ 5.414716] Key type blacklist registered [ 5.414728] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 5.414740] fuse: init (API version 7.44) [ 5.414752] integrity: Platform Keyring initialized [ 5.414764] integrity: Machine keyring initialized [ 5.414779] xor: automatically using best checksumming function avx [ 5.414791] Key type asymmetric registered [ 5.414803] Asymmetric key parser 'x509' registered [ 5.414816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 5.414829] io scheduler mq-deadline registered [ 5.414840] io scheduler kyber registered [ 5.414852] io scheduler bfq registered [ 5.414864] ledtrig-cpu: registered to indicate activity on CPUs [ 5.415115] pcieport 0000:00:01.3: PME: Signaling with IRQ 26 [ 5.415357] pcieport 0000:00:01.3: AER: enabled with IRQ 26 [ 5.415590] pcieport 0000:00:01.7: PME: Signaling with IRQ 27 [ 5.415822] pcieport 0000:00:01.7: AER: enabled with IRQ 27 [ 5.416068] pcieport 0000:00:08.1: PME: Signaling with IRQ 28 [ 5.416086] ACPI: AC: AC Adapter [ACAD] (on-line) [ 5.416099] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 5.416117] ACPI: button: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 5.416142] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 5.416166] ACPI: button: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state [ 5.416190] Could not retrieve perf counters (-19) [ 5.416202] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 5.416216] ACPI: battery: Slot [BAT1] (battery present) [ 5.416228] Non-volatile memory driver v1.3 [ 5.416240] Linux agpgart interface v0.103 [ 5.416252] Freeing initrd memory: 40288K [ 5.416497] tpm_crb MSFT0101:00: Disabling hwrng [ 5.416516] ACPI: bus type drm_connector registered [ 5.416756] xhci_hcd 0000:03:00.3: xHCI Host Controller [ 5.416996] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1 [ 5.417244] xhci_hcd 0000:03:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0004000840000010 [ 5.417493] xhci_hcd 0000:03:00.3: xHCI Host Controller [ 5.417735] xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 2 [ 5.417981] xhci_hcd 0000:03:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 5.418240] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17 [ 5.418441] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 5.418635] usb usb1: Product: xHCI Host Controller [ 5.418831] usb usb1: Manufacturer: Linux 6.17.5-arch1-1 xhci-hcd [ 5.419048] usb usb1: SerialNumber: ... [ 5.419328] hub 1-0:1.0: USB hub found [ 5.419593] hub 1-0:1.0: 4 ports detected [ 5.419885] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.420153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17 [ 5.420408] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 5.420686] usb usb2: Product: xHCI Host Controller [ 5.420958] usb usb2: Manufacturer: Linux 6.17.5-arch1-1 xhci-hcd [ 5.421224] usb usb2: SerialNumber: ... [ 5.421559] hub 2-0:1.0: USB hub found [ 5.421904] hub 2-0:1.0: 4 ports detected [ 5.422252] xhci_hcd 0000:03:00.4: xHCI Host Controller [ 5.422601] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 3 [ 5.422954] xhci_hcd 0000:03:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0004000840000010 [ 5.423314] xhci_hcd 0000:03:00.4: xHCI Host Controller [ 5.423614] xhci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 4 [ 5.423951] xhci_hcd 0000:03:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 5.424240] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17 [ 5.424484] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 5.424728] usb usb3: Product: xHCI Host Controller [ 5.424980] usb usb3: Manufacturer: Linux 6.17.5-arch1-1 xhci-hcd [ 5.425238] usb usb3: SerialNumber: ... [ 5.425520] hub 3-0:1.0: USB hub found [ 5.425819] hub 3-0:1.0: 2 ports detected [ 5.426120] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.426333] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17 [ 5.426566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 5.426766] usb usb4: Product: xHCI Host Controller [ 5.426977] usb usb4: Manufacturer: Linux 6.17.5-arch1-1 xhci-hcd [ 5.427240] usb usb4: SerialNumber: ... [ 5.427578] hub 4-0:1.0: USB hub found [ 5.427874] hub 4-0:1.0: 1 port detected [ 5.427892] usbcore: registered new interface driver usbserial_generic [ 5.427905] usbserial: USB Serial support registered for generic [ 5.427920] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 [ 5.427936] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 5.427950] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.428211] rtc_cmos 00:01: RTC can wake from S4 [ 5.428442] rtc_cmos 00:01: registered as rtc0 [ 5.428682] rtc_cmos 00:01: setting system clock to 2025-10-29T00:49:08 UTC (1761698948) [ 5.428963] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram [ 5.429123] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic [ 5.429147] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0 [ 5.429163] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 5.429184] fbcon: Deferring console take-over [ 5.429311] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 5.429331] hid: raw HID events driver (C) Jiri Kosina [ 5.429345] usbcore: registered new interface driver usbhid [ 5.429359] usbhid: USB HID core driver [ 5.429373] drop_monitor: Initializing network drop monitor service [ 5.429387] NET: Registered PF_INET6 protocol family [ 5.429401] Segment Routing with IPv6 [ 5.429416] RPL Segment Routing with IPv6 [ 5.429434] In-situ OAM (IOAM) with IPv6 [ 5.429448] NET: Registered PF_PACKET protocol family [ 5.429462] x86/amd: Previous system reset reason [0x00080800]: software wrote 0x6 to reset control register 0xCF9 [ 5.429477] microcode: Current revision: 0x08108109 [ 5.429491] IPI shorthand broadcast: enabled [ 5.429505] sched_clock: Marking stable (552943069, 380203)->(577480718, -24157446) [ 5.429519] registered taskstats version 1 [ 5.429532] Loading compiled-in X.509 certificates [ 5.429549] Loaded X.509 cert 'Build time autogenerated kernel key: 4c14fb9492bceb402a9e10d54352fc3dcf9cc666' [ 5.429563] zswap: loaded using pool zstd/zsmalloc [ 5.429577] Demotion targets for Node 0: null [ 5.429597] Key type .fscrypt registered [ 5.429611] Key type fscrypt-provisioning registered [ 5.429625] Btrfs loaded, zoned=yes, fsverity=yes [ 5.429639] Key type big_key registered [ 5.429654] PM: Magic number: 13:987:810 [ 5.429667] RAS: Correctable Errors collector initialized. [ 5.429682] clk: Disabling unused clocks [ 5.429694] PM: genpd: Disabling unused power domains [ 5.429706] Freeing unused decrypted memory: 2028K [ 5.429717] Freeing unused kernel image (initmem) memory: 4692K [ 5.429729] Write protecting the kernel read-only data: 38912k [ 5.429741] Freeing unused kernel image (text/rodata gap) memory: 400K [ 5.429753] Freeing unused kernel image (rodata/data gap) memory: 1592K [ 5.429766] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.429777] rodata_test: all tests were successful [ 5.429791] Run /init as init process [ 5.429803] with arguments: [ 5.429815] /init [ 5.429827] with environment: [ 5.429839] HOME=/ [ 5.429851] TERM=linux [ 5.429862] fbcon: Taking over console [ 5.429874] Console: switching to colour frame buffer device 240x67 [ 5.430209] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 5.430502] usb 3-1: new full-speed USB device number 2 using xhci_hcd [ 5.430722] usb 1-4: New USB device found, idVendor=13d3, idProduct=56f8, bcdDevice=19.02 [ 5.430932] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 5.431186] usb 1-4: Product: ov9734_azurewave_camera [ 5.431395] usb 1-4: Manufacturer: Azurewave [ 5.431604] usb 1-4: SerialNumber: ... [ 5.431827] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [ 5.432068] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.432283] usb 3-1: Product: Goodix Fingerprint Device [ 5.432488] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [ 5.432506] Key type psk registered [ 5.432521] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 5.432533] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/LNXVIDEO:01/input/input4 [ 5.432743] nvme nvme0: pci function 0000:01:00.0 [ 5.432952] nvme nvme0: D3 entry latency set to 8 seconds [ 5.433216] nvme nvme0: 8/0/0 default/read/poll queues [ 5.433234] nvme0n1: p1 p2 p3 [ 5.433522] usb 3-2: new full-speed USB device number 3 using xhci_hcd [ 5.433758] usb 3-2: New USB device found, idVendor=1358, idProduct=c123, bcdDevice= 0.00 [ 5.433967] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.434192] usb 3-2: Product: Bluetooth Radio [ 5.434397] usb 3-2: Manufacturer: Realtek [ 5.434615] usb 3-2: SerialNumber: ... [ 5.434632] tsc: Refined TSC clocksource calibration: 2096.061 MHz [ 5.434650] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36a769ed4, max_idle_ns: 440795206585 ns [ 5.434663] clocksource: Switched to clocksource tsc [ 5.434675] [drm] amdgpu kernel modesetting enabled. [ 5.434687] amdgpu: Virtual CRAT table created for CPU [ 5.434700] amdgpu: Topology: Add CPU node [ 5.434980] amdgpu 0000:03:00.0: amdgpu: initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x19E5:0x3E19 0xC2). [ 5.435240] amdgpu 0000:03:00.0: amdgpu: register mmio base: 0xC0500000 [ 5.435498] amdgpu 0000:03:00.0: amdgpu: register mmio size: 524288 [ 5.435748] amdgpu 0000:03:00.0: amdgpu: detected ip block number 0 <soc15_common> [ 5.435994] amdgpu 0000:03:00.0: amdgpu: detected ip block number 1 <gmc_v9_0> [ 5.436252] amdgpu 0000:03:00.0: amdgpu: detected ip block number 2 <vega10_ih> [ 5.436493] amdgpu 0000:03:00.0: amdgpu: detected ip block number 3 <psp> [ 5.436745] amdgpu 0000:03:00.0: amdgpu: detected ip block number 4 <powerplay> [ 5.436985] amdgpu 0000:03:00.0: amdgpu: detected ip block number 5 <dm> [ 5.437275] amdgpu 0000:03:00.0: amdgpu: detected ip block number 6 <gfx_v9_0> [ 5.437527] amdgpu 0000:03:00.0: amdgpu: detected ip block number 7 <sdma_v4_0> [ 5.437780] amdgpu 0000:03:00.0: amdgpu: detected ip block number 8 <vcn_v1_0> [ 5.438071] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT [ 5.438090] amdgpu: ATOM BIOS: 113-PICASSO-115 [ 5.438102] Console: switching to colour dummy device 80x25 [ 5.438384] amdgpu 0000:03:00.0: vgaarb: deactivate vga console [ 5.438677] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled [ 5.438964] amdgpu 0000:03:00.0: amdgpu: vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 5.439254] amdgpu 0000:03:00.0: amdgpu: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used) [ 5.439558] amdgpu 0000:03:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 5.439578] [drm] Detected VRAM RAM=1024M, BAR=1024M [ 5.439594] [drm] RAM width 128bits DDR4 [ 5.439868] amdgpu 0000:03:00.0: amdgpu: amdgpu: 1024M of VRAM memory ready [ 5.440205] amdgpu 0000:03:00.0: amdgpu: amdgpu: 3431M of GTT memory ready. [ 5.440234] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 5.440247] [drm] PCIE GART of 1024M enabled. [ 5.440259] [drm] PTB located at 0x000000F43FC00000 [ 5.440271] amdgpu: hwmgr_sw_init smu backed is smu10_smu [ 5.440553] amdgpu 0000:03:00.0: amdgpu: Found VCN firmware Version ENC: 1.15 DEC: 3 VEP: 0 Revision: 0 [ 5.440842] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [ 5.441130] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 5.441391] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 5.441657] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [ 5.441683] [drm] DM_PPLIB: values for F clock [ 5.441699] [drm] DM_PPLIB: 667000 in kHz, 2924 in mV [ 5.441714] [drm] DM_PPLIB: 933000 in kHz, 3249 in mV [ 5.441731] [drm] DM_PPLIB: 1067000 in kHz, 3924 in mV [ 5.441746] [drm] DM_PPLIB: 1200000 in kHz, 4074 in mV [ 5.441762] [drm] DM_PPLIB: values for DCF clock [ 5.441775] [drm] DM_PPLIB: 300000 in kHz, 2924 in mV [ 5.441791] [drm] DM_PPLIB: 600000 in kHz, 3249 in mV [ 5.441811] [drm] DM_PPLIB: 626000 in kHz, 3924 in mV [ 5.441824] [drm] DM_PPLIB: 654000 in kHz, 4074 in mV [ 5.442120] amdgpu 0000:03:00.0: amdgpu: [drm] Display Core v3.2.340 initialized on DCN 1.0 [ 5.442450] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [ 5.442671] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 5.442877] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1 [ 5.442898] amdgpu: Virtual CRAT table created for GPU [ 5.442913] amdgpu: Topology: Add dGPU node [0x15d8:0x1002] kfd kfd: amdgpu: added device 1002:15d8 [ 5.443411] amdgpu 0000:03:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8 [ 5.443656] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 5.443905] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 5.444160] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 5.444406] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 5.444650] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 5.444901] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 5.445155] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 5.445401] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 5.445653] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 5.445900] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [ 5.446154] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [ 5.446398] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [ 5.446642] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [ 5.446894] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [ 5.447157] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [ 5.447175] amdgpu: pp_dpm_get_sclk_od was not implemented. [ 5.447188] amdgpu: pp_dpm_get_mclk_od was not implemented. [ 5.447471] amdgpu 0000:03:00.0: amdgpu: Runtime PM not available [ 5.447761] amdgpu 0000:03:00.0: amdgpu: [drm] Using custom brightness curve [ 5.448053] amdgpu 0000:03:00.0: [drm] Registered 4 planes with drm panic [ 5.448076] [drm] Initialized amdgpu 3.64.0 for 0000:03:00.0 on minor 1 [ 5.448093] fbcon: amdgpudrmfb (fb0) is primary device [ 5.448114] Console: switching to colour frame buffer device 240x67 [ 5.448380] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 5.448402] BTRFS: device fsid HASH_F60-89A1-6640-FDBC-7A13E2493A0B devid 1 transid 639184 /dev/nvme0n1p3 (259:3) scanned by mount (268) [ 5.448419] BTRFS info (device nvme0n1p3): first mount of filesystem HASH_F60-89A1-6640-FDBC-7A13E2493A0B [ 5.448435] BTRFS info (device nvme0n1p3): using crc32c (crc32c-lib) checksum algorithm [ 5.448448] BTRFS info (device nvme0n1p3): bdev /dev/nvme0n1p3 errs: wr 0, rd 0, flush 0, corrupt 6, gen 0 [ 5.448463] BTRFS info (device nvme0n1p3): enabling ssd optimizations [ 5.448479] BTRFS info (device nvme0n1p3): turning on async discard [ 5.448498] BTRFS info (device nvme0n1p3): enabling free space tree [ 5.449476] loop: module loaded [ 5.449588] device-mapper: uevent: version 1.0.3 [ 5.449604] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: XXX@XXX [ 5.449881] Asymmetric key parser 'pkcs8' registered [ 5.826115] Adding 15124996k swap on /dev/nvme0n1p2. Priority:100 extents:1 across:15124996k SS [ 5.844020] snd_pci_acp3x 0000:03:00.5: ACP audio mode : 1 [ 5.850015] acpi_cpufreq: overriding BIOS provided _PSD data [ 5.883045] ccp 0000:03:00.2: ccp enabled [ 5.883858] ccp 0000:03:00.2: psp: unable to access the device: you might be running a broken BIOS. [ 5.891068] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 5.891116] mc: Linux media interface: v0.10 [ 5.891148] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer [ 5.891184] RAPL PMU: hw unit of domain package 2^-16 Joules [ 5.891209] RAPL PMU: hw unit of domain core 2^-16 Joules [ 5.910045] input: ELAN2204:00 04F3:3109 Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:3109.0001/input/input6 [ 5.910172] input: ELAN2204:00 04F3:3109 Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:3109.0001/input/input8 [ 5.910230] hid-generic 0018:04F3:3109.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN2204:00 04F3:3109] on i2c-ELAN2204:00 [ 5.949038] input: Huawei WMI hotkeys as /devices/platform/huawei-wmi/input/input9 [ 5.949217] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 5.949686] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 5.952027] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 5.952640] i2c i2c-11: Successfully instantiated SPD at 0x50 [ 5.953225] i2c i2c-11: Successfully instantiated SPD at 0x51 [ 5.957048] videodev: Linux video capture interface: v2.00 [ 5.969030] ACPI: battery: new hook: Huawei Battery Extension [ 5.975017] input: ELAN2204:00 04F3:3109 Mouse as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:3109.0001/input/input10 [ 5.975108] input: ELAN2204:00 04F3:3109 Touchpad as /devices/platform/AMDI0010:01/i2c-1/i2c-ELAN2204:00/0018:04F3:3109.0001/input/input12 [ 5.975177] hid-multitouch 0018:04F3:3109.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN2204:00 04F3:3109] on i2c-ELAN2204:00 [ 6.001038] Bluetooth: Core ver 2.22 [ 6.006021] NET: Registered PF_BLUETOOTH protocol family [ 6.006108] Bluetooth: HCI device and connection manager initialized [ 6.006156] Bluetooth: HCI socket layer initialized [ 6.006197] Bluetooth: L2CAP socket layer initialized [ 6.006227] Bluetooth: SCO socket layer initialized [ 6.034024] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 6.034156] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 6.034701] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 6.042032] mousedev: PS/2 mouse device common for all mice [ 6.044031] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.050116] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.050247] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 6.052022] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 [ 6.052438] cfg80211: failed to load regulatory.db [ 6.065026] ee1004 11-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.067442] ee1004 11-0051: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.223017] usbcore: registered new interface driver btusb [ 6.225023] usb 1-4: Found UVC 1.50 device ov9734_azurewave_camera (13d3:56f8) [ 6.228026] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 6.231054] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 6.231184] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 6.234063] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 6.236030] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [ 6.244087] usbcore: registered new interface driver uvcvideo [ 6.249059] kvm_amd: TSC scaling supported [ 6.249200] kvm_amd: Nested Virtualization enabled [ 6.249242] kvm_amd: Nested Paging enabled [ 6.249265] kvm_amd: LBR virtualization supported [ 6.249296] kvm_amd: SEV disabled (ASIDs 0 - 15) [ 6.249326] kvm_amd: SEV-ES disabled (ASIDs 0 - 4294967295) [ 6.249356] kvm_amd: Virtual VMLOAD VMSAVE supported [ 6.249404] kvm_amd: Virtual GIF supported [ 6.288049] snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client [ 6.306050] rtw88_8822ce 0000:02:00.0: Firmware version 9.9.15, H2C version 15 [ 6.306616] rtw88_8822ce 0000:02:00.0: WOW Firmware version 9.9.4, H2C version 15 [ 6.320041] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 6.325472] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:03:00.1/sound/card0/input13 [ 6.330062] amd_atl: AMD Address Translation Library initialized [ 6.332025] intel_rapl_common: Found RAPL domain package [ 6.332129] intel_rapl_common: Found RAPL domain core [ 6.350060] snd_hda_codec_alc269 hdaudioC1D0: ALC256: picked fixup for PCI SSID 19e5:0000 [ 6.350591] snd_hda_codec_alc269 hdaudioC1D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.350971] snd_hda_codec_alc269 hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.351371] snd_hda_codec_alc269 hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.351762] snd_hda_codec_alc269 hdaudioC1D0: mono: mono_out=0x0 [ 6.352220] snd_hda_codec_alc269 hdaudioC1D0: inputs: [ 6.352586] snd_hda_codec_alc269 hdaudioC1D0: Mic=0x12 [ 6.390032] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:03:00.6/sound/card1/input14 [ 6.715023] Bluetooth: hci0: RTL: fw version 0x2b66d962 [ 6.861070] Bluetooth: hci0: AOSP extensions version v1.00 [ 6.861159] Bluetooth: hci0: AOSP quality report is supported [ 7.147028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.147158] Bluetooth: BNEP filters: protocol multicast [ 7.147193] Bluetooth: BNEP socket layer initialized [ 7.149080] Bluetooth: MGMT ver 1.23 [ 7.161035] NET: Registered PF_ALG protocol family [ 8.597040] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large: [ 8.597160] clocksource: 'hpet' wd_nsec: 503111568 wd_now: 7489790 wd_last: 6daac56 mask: ffffffff [ 8.597223] clocksource: 'tsc' cs_nsec: 503994880 cs_now: 6969df9e0 cs_last: 657a687b3 mask: ffffffffffffffff [ 8.597276] clocksource: Clocksource 'tsc' skewed 883312 ns (0 ms) over watchdog 'hpet' interval of 503111568 ns (503 ms) [ 8.597335] clocksource: 'tsc' is current clocksource. [ 8.597392] tsc: Marking TSC unstable due to clocksource watchdog [ 8.597428] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 8.597459] sched_clock: Marking unstable (8596060057, 380662)<-(8620598115, -24157446) [ 8.597508] clocksource: Checking clocksource tsc synchronization from CPU 2 to CPUs 0-1,3-7. [ 8.597557] clocksource: Switched to clocksource hpet [ 10.882055] rfkill: input handler disabled [ 11.332046] Bluetooth: RFCOMM TTY layer initialized [ 11.332165] Bluetooth: RFCOMM socket layer initialized [ 11.332219] Bluetooth: RFCOMM ver 1.11 [ 12.786048] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 12.960049] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 12.964058] wlan0: authenticated [ 12.964185] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 12.967027] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=53) [ 12.967107] wlan0: associated [ 13.064045] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 16.686201] rfkill: input handler enabled [ 18.088046] rfkill: input handler disabled [ 18.602093] nvme nvme0: using unchecked XXXX buffer [ 176.467067] warning: `Socket Thread' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 1671.349061] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1672.548088] PM: suspend entry (deep) [ 1672.585088] Filesystems sync: 0.037 seconds [ 1673.613773] Freezing user space processes [ 1673.615321] Freezing user space processes completed (elapsed 0.002 seconds) [ 1673.617571] OOM killer disabled. [ 1673.618861] Freezing remaining freezable tasks [ 1673.619198] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 1673.619490] printk: Suspending console(s) (use no_console_suspend to debug) [ 1673.619828] ACPI: EC: interrupt blocked [ 1673.620199] ACPI: PM: Preparing to enter system sleep state S3 [ 1673.620579] ACPI: EC: event blocked [ 1673.620898] ACPI: EC: EC stopped [ 1673.621287] ACPI: PM: Saving platform NVS memory [ 1673.621573] Disabling non-boot CPUs ... [ 1673.623208] smpboot: CPU 7 is now offline [ 1673.623528] smpboot: CPU 6 is now offline [ 1673.623810] smpboot: CPU 5 is now offline [ 1673.624167] smpboot: CPU 4 is now offline [ 1673.624496] smpboot: CPU 3 is now offline [ 1673.624780] smpboot: CPU 2 is now offline [ 1673.625147] smpboot: CPU 1 is now offline [ 1673.625517] ACPI: PM: Low-level resume complete [ 1673.625829] ACPI: EC: EC started [ 1673.626134] ACPI: PM: Restoring platform NVS memory [ 1673.626382] AMD-Vi: Virtual APIC enabled [ 1673.626614] AMD-Vi: Virtual APIC enabled [ 1673.626678] Enabling non-boot CPUs ... [ 1673.626758] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1673.626869] CPU1 is up [ 1673.626982] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 1673.627173] CPU2 is up [ 1673.627338] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 1673.627474] CPU3 is up [ 1673.627609] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 1673.627733] CPU4 is up [ 1673.627878] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 1673.628075] CPU5 is up [ 1673.628261] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 1673.628398] CPU6 is up [ 1673.628538] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 1673.628677] CPU7 is up [ 1673.628811] ACPI: PM: Waking up from system sleep state S3 [ 1673.628936] ACPI: EC: interrupt unblocked [ 1673.629152] ACPI: EC: event unblocked [ 1673.629325] [drm] PCIE GART of 1024M enabled. [ 1673.629566] [drm] PTB located at 0x000000F43FC00000 [ 1673.629692] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [ 1673.632235] nvme nvme0: D3 entry latency set to 8 seconds [ 1673.633485] nvme nvme0: 8/0/0 default/read/poll queues [ 1673.634926] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [ 1673.639131] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 1673.639814] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 1673.640464] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [ 1673.641068] amdgpu: restore the fine grain parameters [ 1673.641765] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [ 1673.642573] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 1673.643318] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 1673.643965] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 1673.644948] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 1673.645601] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 1673.646281] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 1673.646747] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 1673.647367] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 1673.647875] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 1673.648468] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [ 1673.649307] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [ 1673.650084] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [ 1673.650910] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [ 1673.652311] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [ 1673.654606] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [ 1673.655693] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [ 1673.656722] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [ 1673.657747] OOM killer enabled. [ 1673.657950] Restarting tasks: Starting [ 1673.658040] usb 3-1: USB disconnect, device number 2 [ 1673.658244] Restarting tasks: Done [ 1673.658342] random: crng reseeded on system resumption [ 1673.658478] PM: suspend exit [ 1673.658560] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 1673.658640] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 1673.658702] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 1673.658760] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 1673.658826] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [ 1673.737148] usb 3-1: new full-speed USB device number 4 using xhci_hcd [ 1673.894046] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [ 1673.894675] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1673.895035] usb 3-1: Product: Goodix Fingerprint Device [ 1673.895396] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [ 1674.096071] Bluetooth: hci0: RTL: fw version 0x2b66d962 [ 1674.243198] Bluetooth: hci0: AOSP extensions version v1.00 [ 1674.243388] Bluetooth: hci0: AOSP quality report is supported [ 1674.243471] Bluetooth: MGMT ver 1.23 [ 1678.224157] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 1678.388063] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1678.391035] wlan0: authenticated [ 1678.393037] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1678.402099] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [ 1678.402317] wlan0: associated [ 1678.435099] wlan0: Limiting TX power to 17 (20 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [ 1724.007370] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1725.903083] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 1725.984196] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1725.988065] wlan0: authenticated [ 1725.990089] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1725.994076] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [ 1725.994236] wlan0: associated [ 1726.062083] wlan0: Limiting TX power to 17 (20 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [ 1771.007083] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1772.908056] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 1772.985212] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1772.989064] wlan0: authenticated [ 1772.991077] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1772.996118] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [ 1772.996333] wlan0: associated [ 1773.069364] wlan0: Limiting TX power to 17 (20 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [ 1818.002832] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1823.699097] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 1823.771094] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1823.775345] wlan0: authenticated [ 1823.777079] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1823.792060] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [ 1823.792257] wlan0: associated [ 1823.830064] wlan0: Limiting TX power to 17 (20 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [ 1869.014112] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 1870.942064] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 1871.015346] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 1871.018045] wlan0: authenticated [ 1871.020056] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 1871.125103] wlan0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [ 1871.132069] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=9) [ 1871.132314] wlan0: associated [ 1871.135054] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 2018.293115] usb 1-2: new low-speed USB device number 3 using xhci_hcd [ 2018.435070] usb 1-2: New USB device found, idVendor=0e6a, idProduct=6000, bcdDevice= 0.08 [ 2018.435905] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2018.436502] usb 1-2: Product: USB Device [ 2018.437080] usb 1-2: Manufacturer: Eleen [ 2018.462119] input: Eleen USB Device as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2:1.0/0003:0E6A:6000.0002/input/input15 [ 2018.538087] hid-generic 0003:0E6A:6000.0002: input,hidraw1: USB HID v1.10 Keyboard [Eleen USB Device] on usb-0000:03:00.3-2/input0 [ 2022.499071] input: MX Master 3 Keyboard as /devices/virtual/misc/uhid/0005:046D:B023.0003/input/input16 [ 2022.499325] input: MX Master 3 Mouse as /devices/virtual/misc/uhid/0005:046D:B023.0003/input/input17 [ 2022.500081] hid-generic 0005:046D:B023.0003: input,hidraw2: BLUETOOTH HID v0.15 Keyboard [MX Master 3] on XX:XX:XX:XX:XX:XX [ 2022.686119] input: Logitech Wireless Mouse MX Master 3 as /devices/virtual/misc/uhid/0005:046D:B023.0003/input/input19 [ 2022.687052] logitech-hidpp-device 0005:046D:B023.0003: input,hidraw2: BLUETOOTH HID v0.15 Keyboard [Logitech Wireless Mouse MX Master 3] on XX:XX:XX:XX:XX:XX [ 2022.724100] logitech-hidpp-device 0005:046D:B023.0003: HID++ 4.5 device connected. [ 2512.580064] hugetlbfs: paraview (10169): Using mlock ulimits for SHM_HUGETLB is obsolete [ 3433.620044] input: ... (AVRCP) as /devices/virtual/input/input20 [ 3666.743109] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [ 3670.902046] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 3671.052086] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3671.059046] wlan0: authenticated [ 3671.061043] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3671.070237] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=2) [ 3671.082982] wlan0: associated [ 3671.122077] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [ 3679.314333] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 3679.536193] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 3679.699058] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 3679.705187] wlan0: authenticated [ 3679.713054] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 3679.720058] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=17) [ 3679.721144] wlan0: associated [ 3679.799049] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 4779.433282] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 5475.341064] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [ 5475.604222] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 5475.684104] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 5475.692984] wlan0: authenticated [ 5475.695875] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 5475.696236] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=26) [ 5475.696474] wlan0: associated [ 5475.785061] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 5657.832806] perf: interrupt took too long (3145 > 3128), lowering kernel.perf_event_max_sample_rate to 63000 [ 6682.345868] perf: interrupt took too long (3954 > 3931), lowering kernel.perf_event_max_sample_rate to 50000 [ 7271.337157] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [ 7275.530050] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 7275.641126] rtw88_8822ce 0000:02:00.0: failed to do dpk calibration [ 7275.675058] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 7275.781052] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [ 7275.784043] wlan0: authenticated [ 7275.786035] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 7275.794037] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [ 7275.794157] wlan0: associated [ 7276.157089] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [ 7299.150834] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [ 7299.376226] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 7299.548054] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 7299.552261] wlan0: authenticated [ 7299.554055] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 7299.561119] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=36) [ 7299.562935] wlan0: associated [ 7299.658041] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 8177.586082] input: ... (AVRCP) as /devices/virtual/input/input21 [ 9095.408128] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [ 9095.653079] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [ 9095.724395] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 9095.727029] wlan0: authenticated [ 9095.727212] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 9095.735355] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=43) [ 9095.735613] wlan0: associated [ 9095.754092] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [ 9776.230829] perf: interrupt took too long (4965 > 4942), lowering kernel.perf_event_max_sample_rate to 40000 [10891.599066] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [10895.730084] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [10895.881095] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [10895.884383] wlan0: authenticated [10895.896032] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [10895.902056] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [10895.902341] wlan0: associated [10895.935065] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [10898.809039] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 15=4WAY_HANDSHAKE_TIMEOUT) [10902.950087] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [10903.121047] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [10903.125041] wlan0: authenticated [10903.132057] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [10903.148411] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=53) [10903.148706] wlan0: associated [10903.232040] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [12372.313254] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [12373.105033] PM: suspend entry (deep) [12373.140053] Filesystems sync: 0.035 seconds [12374.117813] Freezing user space processes [12374.118545] Freezing user space processes completed (elapsed 0.002 seconds) [12374.118646] OOM killer disabled. [12374.118717] Freezing remaining freezable tasks [12374.118859] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [12374.118944] printk: Suspending console(s) (use no_console_suspend to debug) [12374.119132] ACPI: EC: interrupt blocked [12374.119271] ACPI: PM: Preparing to enter system sleep state S3 [12374.119414] ACPI: EC: event blocked [12374.119559] ACPI: EC: EC stopped [12374.119675] ACPI: PM: Saving platform NVS memory [12374.119799] Disabling non-boot CPUs ... [12374.119885] smpboot: CPU 7 is now offline [12374.120026] smpboot: CPU 6 is now offline [12374.120103] smpboot: CPU 5 is now offline [12374.120220] smpboot: CPU 4 is now offline [12374.120312] smpboot: CPU 3 is now offline [12374.120383] smpboot: CPU 2 is now offline [12374.120458] smpboot: CPU 1 is now offline [12374.120568] ACPI: PM: Low-level resume complete [12374.121585] ACPI: EC: EC started [12374.121692] ACPI: PM: Restoring platform NVS memory [12374.121754] AMD-Vi: Virtual APIC enabled [12374.121800] AMD-Vi: Virtual APIC enabled [12374.121854] Enabling non-boot CPUs ... [12374.121976] smpboot: Booting Node 0 Processor 1 APIC 0x1 [12374.122137] CPU1 is up [12374.122272] smpboot: Booting Node 0 Processor 2 APIC 0x2 [12374.122412] CPU2 is up [12374.122523] smpboot: Booting Node 0 Processor 3 APIC 0x3 [12374.122634] CPU3 is up [12374.122729] smpboot: Booting Node 0 Processor 4 APIC 0x4 [12374.122839] CPU4 is up [12374.122952] smpboot: Booting Node 0 Processor 5 APIC 0x5 [12374.123123] CPU5 is up [12374.123246] smpboot: Booting Node 0 Processor 6 APIC 0x6 [12374.123363] CPU6 is up [12374.123474] smpboot: Booting Node 0 Processor 7 APIC 0x7 [12374.123589] CPU7 is up [12374.123771] ACPI: PM: Waking up from system sleep state S3 [12374.123871] ACPI: EC: interrupt unblocked [12374.124065] ACPI: EC: event unblocked [12374.124227] [drm] PCIE GART of 1024M enabled. [12374.124348] [drm] PTB located at 0x000000F43FC00000 [12374.124434] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [12374.125990] nvme nvme0: D3 entry latency set to 8 seconds [12374.126875] nvme nvme0: 8/0/0 default/read/poll queues [12374.127599] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [12374.128493] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [12374.129328] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [12374.131290] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [12374.132746] amdgpu: restore the fine grain parameters [12374.132844] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [12374.133269] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [12374.133654] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [12374.134401] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [12374.135281] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [12374.135653] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [12374.136073] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [12374.136455] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [12374.136963] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [12374.137480] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [12374.138639] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [12374.139560] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [12374.141394] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [12374.143136] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [12374.144782] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [12374.153648] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [12374.154726] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [12374.155567] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [12374.156341] OOM killer enabled. [12374.156562] Restarting tasks: Starting [12374.156735] usb 3-1: USB disconnect, device number 4 [12374.156939] Restarting tasks: Done [12374.157044] random: crng reseeded on system resumption [12374.157150] PM: suspend exit [12374.157203] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [12374.157258] Bluetooth: hci0: RTL: rom_version status=0 version=3 [12374.157310] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [12374.157379] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [12374.157440] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [12374.312209] usb 3-1: new full-speed USB device number 5 using xhci_hcd [12374.477052] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [12374.477456] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [12374.477928] usb 3-1: Product: Goodix Fingerprint Device [12374.478383] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [12374.604164] Bluetooth: hci0: RTL: fw version 0x2b66d962 [12374.750166] Bluetooth: hci0: AOSP extensions version v1.00 [12374.750308] Bluetooth: hci0: AOSP quality report is supported [12374.751179] Bluetooth: MGMT ver 1.23 [12378.777060] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [12378.867182] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [12378.870067] wlan0: authenticated [12378.872062] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [12378.877048] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=80) [12378.877251] wlan0: associated [12378.914079] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [12394.317072] input: Logitech Wireless Mouse MX Master 3 as /devices/virtual/misc/uhid/0005:046D:B023.0004/input/input22 [12394.317338] logitech-hidpp-device 0005:046D:B023.0004: input,hidraw2: BLUETOOTH HID v0.15 Keyboard [Logitech Wireless Mouse MX Master 3] on XX:XX:XX:XX:XX:XX [12394.348044] logitech-hidpp-device 0005:046D:B023.0004: HID++ 4.5 device connected. [14175.043247] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [14179.191038] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [14179.341034] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14179.345083] wlan0: authenticated [14179.357044] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14179.375130] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [14179.375295] wlan0: associated [14179.403037] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [14460.338254] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [14460.560138] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [14460.732039] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14460.739826] wlan0: authenticated [14460.741045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14460.746040] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=109) [14460.746231] wlan0: associated [14460.821125] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [14953.609161] usb 1-2: USB disconnect, device number 3 [14961.318133] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [14962.569156] PM: suspend entry (deep) [14962.612065] Filesystems sync: 0.042 seconds [14963.722971] Freezing user space processes [14963.724233] Freezing user space processes completed (elapsed 0.003 seconds) [14963.725641] OOM killer disabled. [14963.725831] Freezing remaining freezable tasks [14963.725983] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [14963.726440] printk: Suspending console(s) (use no_console_suspend to debug) [14963.726613] ACPI: EC: interrupt blocked [14963.726738] ACPI: PM: Preparing to enter system sleep state S3 [14963.726821] ACPI: EC: event blocked [14963.727172] ACPI: EC: EC stopped [14963.727271] ACPI: PM: Saving platform NVS memory [14963.727331] Disabling non-boot CPUs ... [14963.727433] smpboot: CPU 7 is now offline [14963.727537] smpboot: CPU 6 is now offline [14963.727602] smpboot: CPU 5 is now offline [14963.727667] smpboot: CPU 4 is now offline [14963.727743] smpboot: CPU 3 is now offline [14963.735020] smpboot: CPU 2 is now offline [14963.736836] smpboot: CPU 1 is now offline [14963.737811] ACPI: PM: Low-level resume complete [14963.737931] ACPI: EC: EC started [14963.738056] ACPI: PM: Restoring platform NVS memory [14963.738168] AMD-Vi: Virtual APIC enabled [14963.738271] AMD-Vi: Virtual APIC enabled [14963.738385] Enabling non-boot CPUs ... [14963.738491] smpboot: Booting Node 0 Processor 1 APIC 0x1 [14963.738604] CPU1 is up [14963.738709] smpboot: Booting Node 0 Processor 2 APIC 0x2 [14963.738836] CPU2 is up [14963.738974] smpboot: Booting Node 0 Processor 3 APIC 0x3 [14963.739140] CPU3 is up [14963.739304] smpboot: Booting Node 0 Processor 4 APIC 0x4 [14963.739466] CPU4 is up [14963.739627] smpboot: Booting Node 0 Processor 5 APIC 0x5 [14963.739814] CPU5 is up [14963.739955] smpboot: Booting Node 0 Processor 6 APIC 0x6 [14963.740110] CPU6 is up [14963.740291] smpboot: Booting Node 0 Processor 7 APIC 0x7 [14963.740436] CPU7 is up [14963.740598] ACPI: PM: Waking up from system sleep state S3 [14963.740646] ACPI: EC: interrupt unblocked [14963.740691] ACPI: EC: event unblocked [14963.740758] [drm] PCIE GART of 1024M enabled. [14963.740837] [drm] PTB located at 0x000000F43FC00000 [14963.740893] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [14963.741545] nvme nvme0: D3 entry latency set to 8 seconds [14963.742234] nvme nvme0: 8/0/0 default/read/poll queues [14963.742720] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [14963.743614] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [14963.745130] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [14963.748694] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [14963.749569] amdgpu: restore the fine grain parameters [14963.751028] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [14963.770482] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [14963.771912] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [14963.773930] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [14963.774897] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [14963.775731] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [14963.778185] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [14963.779163] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [14963.779988] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [14963.780780] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [14963.781605] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [14963.782383] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [14963.783178] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [14963.783805] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [14963.785673] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [14963.786399] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [14963.789126] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [14963.791675] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [14963.792573] OOM killer enabled. [14963.792677] Restarting tasks: Starting [14963.792765] Restarting tasks: Done [14963.792872] random: crng reseeded on system resumption [14963.792988] usb 3-1: USB disconnect, device number 5 [14963.793266] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [14963.793379] Bluetooth: hci0: RTL: rom_version status=0 version=3 [14963.793443] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [14963.793539] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [14963.793616] PM: suspend exit [14963.793712] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [14963.878798] usb 3-1: new full-speed USB device number 6 using xhci_hcd [14964.030077] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [14964.030402] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [14964.030550] usb 3-1: Product: Goodix Fingerprint Device [14964.030745] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [14964.208274] Bluetooth: hci0: RTL: fw version 0x2b66d962 [14964.354080] Bluetooth: hci0: AOSP extensions version v1.00 [14964.354328] Bluetooth: hci0: AOSP quality report is supported [14964.355068] Bluetooth: MGMT ver 1.23 [14968.576068] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [14968.748059] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14968.755056] wlan0: authenticated [14968.757101] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14968.762275] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [14968.762544] wlan0: associated [14968.816086] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [14975.964052] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [14976.180200] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [14976.351040] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14976.354054] wlan0: authenticated [14976.356035] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14976.377041] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=10) [14976.378107] wlan0: associated [14976.460039] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [14993.215056] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [14993.429178] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [14993.600062] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [14993.604074] wlan0: authenticated [14993.607498] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [14993.613589] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [14993.613822] wlan0: associated [14993.671052] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [15015.476046] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15015.693139] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15015.864048] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15015.869982] wlan0: authenticated [15015.870603] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15015.874061] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=1) [15015.874282] wlan0: associated [15015.884058] wlan0: Limiting TX power to 2 dBm as advertised by XX:XX:XX:XX:XX:XX [15027.099735] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15027.317060] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15027.488181] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15027.495380] wlan0: authenticated [15027.495483] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15027.514039] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [15027.514218] wlan0: associated [15027.615996] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [15072.003141] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [15073.867057] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15073.941429] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15073.944066] wlan0: authenticated [15073.944240] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15073.951816] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [15073.952482] wlan0: associated [15073.993067] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [15076.539123] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [15086.563053] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15086.644060] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15086.647512] wlan0: authenticated [15086.647623] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15086.653073] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [15086.653260] wlan0: associated [15086.738072] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [15088.346047] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [15128.810355] perf: interrupt took too long (6216 > 6206), lowering kernel.perf_event_max_sample_rate to 32000 [15129.295045] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15129.367785] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15129.369028] wlan0: authenticated [15129.369115] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15129.477080] wlan0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [15129.485056] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=9) [15129.485283] wlan0: associated [15129.574068] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [15355.706674] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [15355.707925] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [15355.805044] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [15355.805823] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [15355.909070] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [15355.910145] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [15355.989304] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [15355.990279] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [15356.159102] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [15356.160158] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [15356.240174] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [15356.241203] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [15356.354095] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [15356.355096] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [15356.416898] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [15356.417897] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [15398.118056] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15398.329063] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15398.498167] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15398.502063] wlan0: authenticated [15398.510060] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15398.516052] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=1) [15398.519899] wlan0: associated [15398.526057] wlan0: Limiting TX power to 2 dBm as advertised by XX:XX:XX:XX:XX:XX [15514.321048] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15514.532064] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15514.703160] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15514.707043] wlan0: authenticated [15514.715065] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15514.721547] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=9) [15514.723450] wlan0: associated [15514.813048] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [15849.758083] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [15850.968220] PM: suspend entry (deep) [15851.039051] Filesystems sync: 0.071 seconds [15852.011608] Freezing user space processes [15852.015125] Freezing user space processes completed (elapsed 0.003 seconds) [15852.016614] OOM killer disabled. [15852.018427] Freezing remaining freezable tasks [15852.019032] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [15852.019410] printk: Suspending console(s) (use no_console_suspend to debug) [15852.019692] ACPI: EC: interrupt blocked [15852.019904] ACPI: PM: Preparing to enter system sleep state S3 [15852.020252] ACPI: EC: event blocked [15852.020468] ACPI: EC: EC stopped [15852.021093] ACPI: PM: Saving platform NVS memory [15852.021504] Disabling non-boot CPUs ... [15852.021752] smpboot: CPU 7 is now offline [15852.021932] smpboot: CPU 6 is now offline [15852.023731] smpboot: CPU 5 is now offline [15852.024152] smpboot: CPU 4 is now offline [15852.024342] smpboot: CPU 3 is now offline [15852.024633] smpboot: CPU 2 is now offline [15852.024902] smpboot: CPU 1 is now offline [15852.025329] ACPI: PM: Low-level resume complete [15852.025622] ACPI: EC: EC started [15852.025796] ACPI: PM: Restoring platform NVS memory [15852.025998] AMD-Vi: Virtual APIC enabled [15852.026064] AMD-Vi: Virtual APIC enabled [15852.026108] Enabling non-boot CPUs ... [15852.026206] smpboot: Booting Node 0 Processor 1 APIC 0x1 [15852.026294] CPU1 is up [15852.026455] smpboot: Booting Node 0 Processor 2 APIC 0x2 [15852.026551] CPU2 is up [15852.026643] smpboot: Booting Node 0 Processor 3 APIC 0x3 [15852.026777] CPU3 is up [15852.026839] smpboot: Booting Node 0 Processor 4 APIC 0x4 [15852.026970] CPU4 is up [15852.027042] smpboot: Booting Node 0 Processor 5 APIC 0x5 [15852.027470] CPU5 is up [15852.027562] smpboot: Booting Node 0 Processor 6 APIC 0x6 [15852.027671] CPU6 is up [15852.027811] smpboot: Booting Node 0 Processor 7 APIC 0x7 [15852.038564] CPU7 is up [15852.039586] ACPI: PM: Waking up from system sleep state S3 [15852.041221] ACPI: EC: interrupt unblocked [15852.041462] ACPI: EC: event unblocked [15852.042335] [drm] PCIE GART of 1024M enabled. [15852.042613] [drm] PTB located at 0x000000F43FC00000 [15852.042842] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [15852.043841] nvme nvme0: D3 entry latency set to 8 seconds [15852.044761] nvme nvme0: 8/0/0 default/read/poll queues [15852.045274] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [15852.045780] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [15852.046561] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [15852.047652] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [15852.048516] amdgpu: restore the fine grain parameters [15852.048724] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [15852.051304] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [15852.053691] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [15852.056150] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [15852.057175] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [15852.058046] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [15852.058994] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [15852.061824] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [15852.062550] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [15852.064572] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [15852.072548] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [15852.073603] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [15852.074580] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [15852.132400] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [15852.133763] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [15852.135123] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [15852.136056] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [15852.137117] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [15852.138226] OOM killer enabled. [15852.138353] Restarting tasks: Starting [15852.138484] usb 3-1: USB disconnect, device number 6 [15852.138854] Restarting tasks: Done [15852.138984] random: crng reseeded on system resumption [15852.139165] PM: suspend exit [15852.139258] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [15852.139362] Bluetooth: hci0: RTL: rom_version status=0 version=3 [15852.139503] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [15852.139622] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [15852.139723] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [15852.150057] usb 3-1: new full-speed USB device number 7 using xhci_hcd [15852.312042] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [15852.312568] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [15852.312939] usb 3-1: Product: Goodix Fingerprint Device [15852.313432] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [15852.504275] Bluetooth: hci0: RTL: fw version 0x2b66d962 [15852.650202] Bluetooth: hci0: AOSP extensions version v1.00 [15852.650426] Bluetooth: hci0: AOSP quality report is supported [15852.661048] Bluetooth: MGMT ver 1.23 [15856.791541] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15856.963086] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15856.967050] wlan0: authenticated [15856.967225] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15856.973338] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=1) [15856.973589] wlan0: associated [15857.039762] wlan0: Limiting TX power to 2 dBm as advertised by XX:XX:XX:XX:XX:XX [15934.959116] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15935.178063] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15935.349250] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15935.353063] wlan0: authenticated [15935.353303] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15935.359056] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=11) [15935.359281] wlan0: associated [15935.419045] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [15992.590047] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [15992.805075] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [15992.985200] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15992.989180] wlan0: authenticated [15993.015061] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15993.021307] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=1) [15993.021509] wlan0: associated [15993.036039] wlan0: Limiting TX power to 2 dBm as advertised by XX:XX:XX:XX:XX:XX [16011.718041] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [16011.940044] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16012.112088] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16012.116818] wlan0: authenticated [16012.118217] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16012.122049] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=11) [16012.122314] wlan0: associated [16012.196042] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [16054.267078] i2c_hid_acpi i2c-ELAN2204:00: i2c_hid_get_input: IRQ triggered but there's no XXXX [16098.522063] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [16098.748164] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16098.919043] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16098.923731] wlan0: authenticated [16098.943053] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16098.949052] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=1) [16098.949323] wlan0: associated [16098.959069] wlan0: Limiting TX power to 2 dBm as advertised by XX:XX:XX:XX:XX:XX [16105.556062] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [16105.778191] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16105.940055] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16105.944050] wlan0: authenticated [16105.959044] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16105.965047] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=11) [16105.965284] wlan0: associated [16106.003050] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [16179.974048] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [16180.196095] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16180.367084] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16180.371490] wlan0: authenticated [16180.390045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16180.402061] wlan0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [16180.414043] wlan0: associate with XX:XX:XX:XX:XX:XX (try 3/3) [16180.423049] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=1) [16180.423220] wlan0: associated [16180.538050] wlan0: Limiting TX power to 2 dBm as advertised by XX:XX:XX:XX:XX:XX [16218.573045] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [16218.798078] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16218.982125] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16218.987579] wlan0: authenticated [16218.989045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16218.995039] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=11) [16218.996052] wlan0: associated [16219.020037] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [16234.487059] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [16234.710057] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16234.881079] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16234.885140] wlan0: authenticated [16234.893046] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16234.900051] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=1) [16234.900261] wlan0: associated [16234.956045] wlan0: Limiting TX power to 2 dBm as advertised by XX:XX:XX:XX:XX:XX [16272.064050] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [16272.287170] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16272.458037] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16272.462052] wlan0: authenticated [16272.470232] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16272.476053] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=12) [16272.476231] wlan0: associated [16272.499058] wlan0: Limiting TX power to 3 dBm as advertised by XX:XX:XX:XX:XX:XX [16326.607055] wlan0: AP XX:XX:XX:XX:XX:XX appears to change mode (expected VHT, found legacy) in beacon, disconnect [16328.048046] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16328.198175] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16328.202049] wlan0: authenticated [16328.207045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16328.213039] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [16328.213249] wlan0: associated [16328.403077] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [16354.613045] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [16355.849769] PM: suspend entry (deep) [16355.894066] Filesystems sync: 0.044 seconds [16356.749197] Freezing user space processes [16356.750679] Freezing user space processes completed (elapsed 0.002 seconds) [16356.752643] OOM killer disabled. [16356.752957] Freezing remaining freezable tasks [16356.753125] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [16356.753236] printk: Suspending console(s) (use no_console_suspend to debug) [16356.753352] ACPI: EC: interrupt blocked [16356.753977] ACPI: PM: Preparing to enter system sleep state S3 [16356.754119] ACPI: EC: event blocked [16356.754232] ACPI: EC: EC stopped [16356.754339] ACPI: PM: Saving platform NVS memory [16356.754452] Disabling non-boot CPUs ... [16356.754564] smpboot: CPU 7 is now offline [16356.754662] smpboot: CPU 6 is now offline [16356.754767] smpboot: CPU 5 is now offline [16356.754877] smpboot: CPU 4 is now offline [16356.754982] smpboot: CPU 3 is now offline [16356.755108] smpboot: CPU 2 is now offline [16356.755211] smpboot: CPU 1 is now offline [16356.755315] ACPI: PM: Low-level resume complete [16356.755425] ACPI: EC: EC started [16356.755560] ACPI: PM: Restoring platform NVS memory [16356.755657] AMD-Vi: Virtual APIC enabled [16356.755684] AMD-Vi: Virtual APIC enabled [16356.755715] Enabling non-boot CPUs ... [16356.755750] smpboot: Booting Node 0 Processor 1 APIC 0x1 [16356.755777] CPU1 is up [16356.755829] smpboot: Booting Node 0 Processor 2 APIC 0x2 [16356.755872] CPU2 is up [16356.755922] smpboot: Booting Node 0 Processor 3 APIC 0x3 [16356.755970] CPU3 is up [16356.756023] smpboot: Booting Node 0 Processor 4 APIC 0x4 [16356.756074] CPU4 is up [16356.756116] smpboot: Booting Node 0 Processor 5 APIC 0x5 [16356.756167] CPU5 is up [16356.756203] smpboot: Booting Node 0 Processor 6 APIC 0x6 [16356.756249] CPU6 is up [16356.756285] smpboot: Booting Node 0 Processor 7 APIC 0x7 [16356.756322] CPU7 is up [16356.756353] ACPI: PM: Waking up from system sleep state S3 [16356.756399] ACPI: EC: interrupt unblocked [16356.756441] ACPI: EC: event unblocked [16356.756486] [drm] PCIE GART of 1024M enabled. [16356.756529] [drm] PTB located at 0x000000F43FC00000 [16356.756566] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [16356.756925] nvme nvme0: D3 entry latency set to 8 seconds [16356.757200] nvme nvme0: 8/0/0 default/read/poll queues [16356.757430] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [16356.757733] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [16356.758328] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [16356.759153] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [16356.759462] amdgpu: restore the fine grain parameters [16356.759515] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [16356.759824] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [16356.760243] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [16356.760560] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [16356.760876] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [16356.761189] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [16356.761479] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [16356.761837] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [16356.762155] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [16356.762430] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [16356.762735] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [16356.763121] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [16356.763584] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [16356.764489] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [16356.765605] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [16356.765975] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [16356.766309] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [16356.766661] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [16356.766972] OOM killer enabled. [16356.767059] Restarting tasks: Starting [16356.767112] usb 3-1: USB disconnect, device number 7 [16356.767248] Restarting tasks: Done [16356.767300] random: crng reseeded on system resumption [16356.767354] PM: suspend exit [16356.767399] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [16356.767434] Bluetooth: hci0: RTL: rom_version status=0 version=3 [16356.767476] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [16356.767559] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [16356.767629] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [16356.872047] usb 3-1: new full-speed USB device number 8 using xhci_hcd [16357.031136] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [16357.031352] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [16357.031467] usb 3-1: Product: Goodix Fingerprint Device [16357.031589] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [16357.243043] Bluetooth: hci0: RTL: fw version 0x2b66d962 [16357.389052] Bluetooth: hci0: AOSP extensions version v1.00 [16357.389217] Bluetooth: hci0: AOSP quality report is supported [16357.401037] Bluetooth: MGMT ver 1.23 [16361.386041] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [16361.559034] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [16361.562041] wlan0: authenticated [16361.565045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [16361.569034] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=148) [16361.569151] wlan0: associated [16361.641044] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [16362.616049] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16362.617142] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16362.711041] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16362.711750] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16362.797049] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16362.797882] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16362.887177] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16362.887972] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16362.945057] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16362.945938] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16365.329997] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16365.330563] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16365.545045] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16365.545779] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16365.750793] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16365.751555] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16365.851058] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16365.851845] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16365.980051] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16365.980673] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.040123] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.040653] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.179719] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.180288] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.230046] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.230532] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.365574] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.366416] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.397092] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.398062] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.562037] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.562543] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.615808] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.616581] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.728811] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.729656] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.782737] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.783500] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.875148] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.875883] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16366.940237] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16366.940942] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16367.064965] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16367.065775] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16367.100049] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16367.100860] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16367.434695] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16367.435531] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16367.511655] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16367.512498] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16367.676040] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16367.676706] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16367.706146] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16367.706903] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16367.843743] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16367.844480] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16367.927041] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16367.927506] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16368.058591] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16368.059371] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16368.113039] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16368.113792] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [16368.266051] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [16368.266808] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18667.164046] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [18668.298299] PM: suspend entry (deep) [18668.523562] Filesystems sync: 0.225 seconds [18669.434811] Freezing user space processes [18669.436347] Freezing user space processes completed (elapsed 0.002 seconds) [18669.439739] OOM killer disabled. [18669.440128] Freezing remaining freezable tasks [18669.440407] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [18669.440665] printk: Suspending console(s) (use no_console_suspend to debug) [18669.440977] ACPI: EC: interrupt blocked [18669.442083] ACPI: PM: Preparing to enter system sleep state S3 [18669.442311] ACPI: EC: event blocked [18669.442515] ACPI: EC: EC stopped [18669.448050] ACPI: PM: Saving platform NVS memory [18669.456616] Disabling non-boot CPUs ... [18669.459950] smpboot: CPU 7 is now offline [18669.460273] smpboot: CPU 6 is now offline [18669.460558] smpboot: CPU 5 is now offline [18669.460776] smpboot: CPU 4 is now offline [18669.461112] smpboot: CPU 3 is now offline [18669.461280] smpboot: CPU 2 is now offline [18669.461631] smpboot: CPU 1 is now offline [18669.461809] ACPI: PM: Low-level resume complete [18669.462187] ACPI: EC: EC started [18669.462391] ACPI: PM: Restoring platform NVS memory [18669.462557] AMD-Vi: Virtual APIC enabled [18669.462741] AMD-Vi: Virtual APIC enabled [18669.462790] Enabling non-boot CPUs ... [18669.462878] smpboot: Booting Node 0 Processor 1 APIC 0x1 [18669.463023] CPU1 is up [18669.463120] smpboot: Booting Node 0 Processor 2 APIC 0x2 [18669.463195] CPU2 is up [18669.463295] smpboot: Booting Node 0 Processor 3 APIC 0x3 [18669.463374] CPU3 is up [18669.463447] smpboot: Booting Node 0 Processor 4 APIC 0x4 [18669.463566] CPU4 is up [18669.463889] smpboot: Booting Node 0 Processor 5 APIC 0x5 [18669.464218] CPU5 is up [18669.464415] smpboot: Booting Node 0 Processor 6 APIC 0x6 [18669.466329] CPU6 is up [18669.466618] smpboot: Booting Node 0 Processor 7 APIC 0x7 [18669.466695] CPU7 is up [18669.466774] ACPI: PM: Waking up from system sleep state S3 [18669.466843] ACPI: EC: interrupt unblocked [18669.466912] ACPI: EC: event unblocked [18669.466990] [drm] PCIE GART of 1024M enabled. [18669.467112] [drm] PTB located at 0x000000F43FC00000 [18669.467314] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [18669.468192] nvme nvme0: D3 entry latency set to 8 seconds [18669.468661] nvme nvme0: 8/0/0 default/read/poll queues [18669.469115] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [18669.469944] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [18669.473037] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [18669.474212] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [18669.475123] amdgpu: restore the fine grain parameters [18669.475348] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [18669.476161] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [18669.489339] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [18669.490057] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [18669.490770] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [18669.505122] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [18669.506505] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [18669.510290] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [18669.511352] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [18669.512419] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [18669.513458] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [18669.514486] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [18669.515475] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [18669.516620] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [18669.528728] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [18669.529730] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [18669.530615] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [18669.531610] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [18669.532610] OOM killer enabled. [18669.532733] Restarting tasks: Starting [18669.532824] usb 3-1: USB disconnect, device number 8 [18669.534112] Restarting tasks: Done [18669.534323] random: crng reseeded on system resumption [18669.534474] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [18669.534607] PM: suspend exit [18669.534701] Bluetooth: hci0: RTL: rom_version status=0 version=3 [18669.534834] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [18669.534943] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [18669.535068] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [18669.583945] usb 3-1: new full-speed USB device number 9 using xhci_hcd [18669.725158] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [18669.725474] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [18669.726056] usb 3-1: Product: Goodix Fingerprint Device [18669.726515] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [18669.923291] Bluetooth: hci0: RTL: fw version 0x2b66d962 [18670.069089] Bluetooth: hci0: AOSP extensions version v1.00 [18670.069388] Bluetooth: hci0: AOSP quality report is supported [18670.080074] Bluetooth: MGMT ver 1.23 [18673.821098] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [18674.003179] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [18674.012103] wlan0: authenticated [18674.012696] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [18674.013030] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=2) [18674.013182] wlan0: associated [18674.086047] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [18699.934065] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [18700.143333] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [18700.314062] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [18700.318042] wlan0: authenticated [18700.325081] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [18700.328065] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [18700.328351] wlan0: associated [18700.431072] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [18767.416157] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [18767.649053] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [18767.831051] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [18767.835679] wlan0: authenticated [18767.842039] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [18767.845085] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=2) [18767.845297] wlan0: associated [18767.879029] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [18806.199072] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [18806.200213] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18806.269499] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [18806.270453] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18806.371953] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [18806.372804] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18806.443085] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [18806.443892] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18806.530170] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [18806.531043] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18806.614211] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [18806.615045] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18806.920079] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [18806.920828] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18806.970220] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [18806.971057] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [18908.752054] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [18908.980068] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [18909.151057] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [18909.155040] wlan0: authenticated [18909.155204] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [18909.161059] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [18909.161274] wlan0: associated [18909.221052] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [18957.398051] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [18957.623078] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [18957.805073] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [18957.809054] wlan0: authenticated [18957.826046] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [18957.830041] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=2) [18957.831253] wlan0: associated [18957.871410] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [18984.402051] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [18984.623298] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [18984.794053] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [18984.799053] wlan0: authenticated [18984.806091] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [18984.812048] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [18984.813044] wlan0: associated [18984.842155] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19005.113080] amdgpu 0000:03:00.0: amdgpu: [drm] Failed to setup vendor infoframe on connector HDMI-A-1: -22 [19033.401070] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19033.622064] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19033.804071] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19033.808049] wlan0: authenticated [19033.808223] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19033.814073] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=2) [19033.814362] wlan0: associated [19033.909056] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19071.389066] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19071.620193] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19071.791061] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19071.795039] wlan0: authenticated [19071.795192] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19071.801044] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [19071.801245] wlan0: associated [19071.849056] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19131.377064] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19131.604174] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19131.786073] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19131.794924] wlan0: authenticated [19131.795493] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19131.797042] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [19131.797245] wlan0: associated [19131.883280] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19158.459054] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19158.671216] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19158.842068] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19158.846332] wlan0: authenticated [19158.853391] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19158.853482] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [19158.853558] wlan0: associated [19158.957063] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19174.780056] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19175.007374] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19175.189058] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19175.193091] wlan0: authenticated [19175.193287] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19175.199283] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [19175.203747] wlan0: associated [19175.231155] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19212.675049] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19212.890191] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19213.061137] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19213.066141] wlan0: authenticated [19213.066361] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19213.071304] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [19213.071870] wlan0: associated [19213.166036] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19272.444070] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19272.661149] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19272.843073] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19272.847296] wlan0: authenticated [19272.849054] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19272.855168] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=2) [19272.855457] wlan0: associated [19272.894173] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19332.369047] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19332.592045] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19332.754063] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19332.758257] wlan0: authenticated [19332.772044] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19332.778090] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [19332.779090] wlan0: associated [19332.865040] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19359.405071] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19359.626173] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19359.807063] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19359.917161] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [19359.920049] wlan0: authenticated [19359.920218] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19359.927060] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=2) [19359.927291] wlan0: associated [19360.002082] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19397.354055] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19397.590083] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19397.761203] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19397.776203] wlan0: authenticated [19397.782100] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19397.785328] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [19397.785500] wlan0: associated [19397.834046] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19413.725044] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19413.948160] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19414.130068] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19414.134338] wlan0: authenticated [19414.134461] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19414.140041] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=4) [19414.140236] wlan0: associated [19414.213033] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19506.459064] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19506.682145] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19506.853116] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19506.857050] wlan0: authenticated [19506.870042] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19506.873110] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=3) [19506.873294] wlan0: associated [19506.880038] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19533.330069] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19533.549077] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19533.731203] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19533.735355] wlan0: authenticated [19533.736063] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19533.741069] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=7) [19533.742062] wlan0: associated [19533.810958] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19560.553060] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19560.781157] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19560.952097] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19560.956110] wlan0: authenticated [19560.956254] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19560.962065] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=4) [19560.962269] wlan0: associated [19560.983066] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19576.752056] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19576.976073] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19577.158069] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19577.162286] wlan0: authenticated [19577.162372] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19577.168038] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=4) [19577.168216] wlan0: associated [19577.259042] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19680.015974] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [19681.201025] PM: suspend entry (deep) [19681.236071] Filesystems sync: 0.036 seconds [19682.181247] Freezing user space processes [19682.182691] Freezing user space processes completed (elapsed 0.002 seconds) [19682.185497] OOM killer disabled. [19682.186153] Freezing remaining freezable tasks [19682.186441] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [19682.186730] printk: Suspending console(s) (use no_console_suspend to debug) [19682.187129] ACPI: EC: interrupt blocked [19682.187517] ACPI: PM: Preparing to enter system sleep state S3 [19682.187803] ACPI: EC: event blocked [19682.188128] ACPI: EC: EC stopped [19682.188462] ACPI: PM: Saving platform NVS memory [19682.188810] Disabling non-boot CPUs ... [19682.189153] smpboot: CPU 7 is now offline [19682.191256] smpboot: CPU 6 is now offline [19682.191681] smpboot: CPU 5 is now offline [19682.192391] smpboot: CPU 4 is now offline [19682.196958] smpboot: CPU 3 is now offline [19682.197489] smpboot: CPU 2 is now offline [19682.197857] smpboot: CPU 1 is now offline [19682.198484] ACPI: PM: Low-level resume complete [19682.198879] ACPI: EC: EC started [19682.199187] ACPI: PM: Restoring platform NVS memory [19682.199523] AMD-Vi: Virtual APIC enabled [19682.199783] AMD-Vi: Virtual APIC enabled [19682.199835] Enabling non-boot CPUs ... [19682.199883] smpboot: Booting Node 0 Processor 1 APIC 0x1 [19682.199955] CPU1 is up [19682.200182] smpboot: Booting Node 0 Processor 2 APIC 0x2 [19682.200471] CPU2 is up [19682.200573] smpboot: Booting Node 0 Processor 3 APIC 0x3 [19682.200972] CPU3 is up [19682.201119] smpboot: Booting Node 0 Processor 4 APIC 0x4 [19682.201215] CPU4 is up [19682.201373] smpboot: Booting Node 0 Processor 5 APIC 0x5 [19682.201458] CPU5 is up [19682.201514] smpboot: Booting Node 0 Processor 6 APIC 0x6 [19682.201574] CPU6 is up [19682.201651] smpboot: Booting Node 0 Processor 7 APIC 0x7 [19682.201724] CPU7 is up [19682.201887] ACPI: PM: Waking up from system sleep state S3 [19682.201970] ACPI: EC: interrupt unblocked [19682.202111] ACPI: EC: event unblocked [19682.202209] [drm] PCIE GART of 1024M enabled. [19682.202279] [drm] PTB located at 0x000000F43FC00000 [19682.202343] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [19682.203259] nvme nvme0: D3 entry latency set to 8 seconds [19682.204555] nvme nvme0: 8/0/0 default/read/poll queues [19682.205717] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [19682.206657] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [19682.207758] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [19682.208626] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [19682.209272] amdgpu: restore the fine grain parameters [19682.209373] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [19682.210123] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [19682.210747] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [19682.211402] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [19682.211916] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [19682.212643] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [19682.213662] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [19682.214830] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [19682.215696] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [19682.216630] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [19682.218936] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [19682.220107] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [19682.221111] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [19682.222199] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [19682.223124] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [19682.224161] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [19682.224995] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [19682.226776] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [19682.228129] OOM killer enabled. [19682.228225] Restarting tasks: Starting [19682.228326] usb 3-1: USB disconnect, device number 9 [19682.228550] Restarting tasks: Done [19682.228657] random: crng reseeded on system resumption [19682.228781] PM: suspend exit [19682.228885] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [19682.228969] Bluetooth: hci0: RTL: rom_version status=0 version=3 [19682.229102] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [19682.229223] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [19682.229368] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [19682.307053] usb 3-1: new full-speed USB device number 10 using xhci_hcd [19682.466137] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [19682.466695] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19682.467097] usb 3-1: Product: Goodix Fingerprint Device [19682.467464] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [19682.666300] Bluetooth: hci0: RTL: fw version 0x2b66d962 [19682.812097] Bluetooth: hci0: AOSP extensions version v1.00 [19682.812361] Bluetooth: hci0: AOSP quality report is supported [19682.824080] Bluetooth: MGMT ver 1.23 [19686.447060] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19686.527290] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19686.528061] wlan0: authenticated [19686.528254] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19686.535053] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=4) [19686.535268] wlan0: associated [19686.616044] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [19746.323078] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [19746.546083] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19746.717192] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19746.721061] wlan0: authenticated [19746.729063] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19746.735197] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=4) [19746.736096] wlan0: associated [19746.799047] wlan0: Limiting TX power to 5 dBm as advertised by XX:XX:XX:XX:XX:XX [19747.045058] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [19748.303774] PM: suspend entry (deep) [19748.350265] Filesystems sync: 0.047 seconds [19749.202948] Freezing user space processes [19749.204466] Freezing user space processes completed (elapsed 0.002 seconds) [19749.206776] OOM killer disabled. [19749.207141] Freezing remaining freezable tasks [19749.207428] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [19749.207670] printk: Suspending console(s) (use no_console_suspend to debug) [19749.207900] ACPI: EC: interrupt blocked [19749.208228] ACPI: PM: Preparing to enter system sleep state S3 [19749.208449] ACPI: EC: event blocked [19749.208903] ACPI: EC: EC stopped [19749.209191] ACPI: PM: Saving platform NVS memory [19749.209430] Disabling non-boot CPUs ... [19749.209671] smpboot: CPU 7 is now offline [19749.209916] smpboot: CPU 6 is now offline [19749.211301] smpboot: CPU 5 is now offline [19749.212033] smpboot: CPU 4 is now offline [19749.212341] smpboot: CPU 3 is now offline [19749.212563] smpboot: CPU 2 is now offline [19749.212881] smpboot: CPU 1 is now offline [19749.213202] ACPI: PM: Low-level resume complete [19749.213505] ACPI: EC: EC started [19749.213742] ACPI: PM: Restoring platform NVS memory [19749.213995] AMD-Vi: Virtual APIC enabled [19749.214289] AMD-Vi: Virtual APIC enabled [19749.214354] Enabling non-boot CPUs ... [19749.214486] smpboot: Booting Node 0 Processor 1 APIC 0x1 [19749.214603] CPU1 is up [19749.214723] smpboot: Booting Node 0 Processor 2 APIC 0x2 [19749.214859] CPU2 is up [19749.215128] smpboot: Booting Node 0 Processor 3 APIC 0x3 [19749.215252] CPU3 is up [19749.215420] smpboot: Booting Node 0 Processor 4 APIC 0x4 [19749.215569] CPU4 is up [19749.215789] smpboot: Booting Node 0 Processor 5 APIC 0x5 [19749.219253] CPU5 is up [19749.219368] smpboot: Booting Node 0 Processor 6 APIC 0x6 [19749.219455] CPU6 is up [19749.222052] smpboot: Booting Node 0 Processor 7 APIC 0x7 [19749.222207] CPU7 is up [19749.222282] ACPI: PM: Waking up from system sleep state S3 [19749.224215] ACPI: EC: interrupt unblocked [19749.224340] ACPI: EC: event unblocked [19749.224614] [drm] PCIE GART of 1024M enabled. [19749.224852] [drm] PTB located at 0x000000F43FC00000 [19749.224967] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [19749.226134] nvme nvme0: D3 entry latency set to 8 seconds [19749.226692] nvme nvme0: 8/0/0 default/read/poll queues [19749.227215] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [19749.228083] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [19749.228849] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [19749.229655] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [19749.230486] amdgpu: restore the fine grain parameters [19749.230743] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [19749.231436] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [19749.232118] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [19749.232725] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [19749.233340] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [19749.233891] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [19749.235887] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [19749.236721] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [19749.237886] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [19749.242701] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [19749.246579] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [19749.250232] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [19749.252332] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [19749.255136] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [19749.256680] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [19749.258842] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [19749.260889] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [19749.261858] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [19749.262758] OOM killer enabled. [19749.262881] Restarting tasks: Starting [19749.262982] usb 3-1: USB disconnect, device number 10 [19749.263266] Restarting tasks: Done [19749.263354] random: crng reseeded on system resumption [19749.263461] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [19749.263559] PM: suspend exit [19749.263650] Bluetooth: hci0: RTL: rom_version status=0 version=3 [19749.263729] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [19749.263810] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [19749.263889] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [19749.373308] usb 3-1: new full-speed USB device number 11 using xhci_hcd [19749.485126] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [19749.485778] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19749.486276] usb 3-1: Product: Goodix Fingerprint Device [19749.486739] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [19749.695316] Bluetooth: hci0: RTL: fw version 0x2b66d962 [19749.841126] Bluetooth: hci0: AOSP extensions version v1.00 [19749.841377] Bluetooth: hci0: AOSP quality report is supported [19749.853368] Bluetooth: MGMT ver 1.23 [19753.818039] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [19753.891074] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19753.894092] wlan0: authenticated [19753.894238] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19753.901083] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=169) [19753.901341] wlan0: associated [19753.988079] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [19968.161074] Bluetooth: hci0: AOSP extensions version v1.00 [19968.174541] Bluetooth: hci0: AOSP quality report is supported [19980.902051] input: ... (AVRCP) as /devices/virtual/input/input23 [20419.415086] perf: interrupt took too long (7777 > 7770), lowering kernel.perf_event_max_sample_rate to 25000 [20444.546058] input: ... (AVRCP) as /devices/virtual/input/input24 [21966.588208] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [21967.753502] PM: suspend entry (deep) [21967.796119] Filesystems sync: 0.042 seconds [21968.921929] Freezing user space processes [21968.923563] Freezing user space processes completed (elapsed 0.003 seconds) [21968.934506] OOM killer disabled. [21968.935920] Freezing remaining freezable tasks [21968.937454] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [21968.937697] printk: Suspending console(s) (use no_console_suspend to debug) [21968.937910] ACPI: EC: interrupt blocked [21968.938215] ACPI: PM: Preparing to enter system sleep state S3 [21968.938450] ACPI: EC: event blocked [21968.938671] ACPI: EC: EC stopped [21968.938934] ACPI: PM: Saving platform NVS memory [21968.939180] Disabling non-boot CPUs ... [21968.939430] smpboot: CPU 7 is now offline [21968.939653] smpboot: CPU 6 is now offline [21968.939840] smpboot: CPU 5 is now offline [21968.940153] smpboot: CPU 4 is now offline [21968.940414] smpboot: CPU 3 is now offline [21968.940616] smpboot: CPU 2 is now offline [21968.940803] smpboot: CPU 1 is now offline [21968.941074] ACPI: PM: Low-level resume complete [21968.941298] ACPI: EC: EC started [21968.941515] ACPI: PM: Restoring platform NVS memory [21968.941704] AMD-Vi: Virtual APIC enabled [21968.941928] AMD-Vi: Virtual APIC enabled [21968.941978] Enabling non-boot CPUs ... [21968.942071] smpboot: Booting Node 0 Processor 1 APIC 0x1 [21968.942126] CPU1 is up [21968.942247] smpboot: Booting Node 0 Processor 2 APIC 0x2 [21968.942353] CPU2 is up [21968.942471] smpboot: Booting Node 0 Processor 3 APIC 0x3 [21968.942609] CPU3 is up [21968.942749] smpboot: Booting Node 0 Processor 4 APIC 0x4 [21968.942958] CPU4 is up [21968.943135] smpboot: Booting Node 0 Processor 5 APIC 0x5 [21968.943235] CPU5 is up [21968.943405] smpboot: Booting Node 0 Processor 6 APIC 0x6 [21968.943644] CPU6 is up [21968.945772] smpboot: Booting Node 0 Processor 7 APIC 0x7 [21968.946387] CPU7 is up [21968.946543] ACPI: PM: Waking up from system sleep state S3 [21968.946713] ACPI: EC: interrupt unblocked [21968.946844] ACPI: EC: event unblocked [21968.947039] [drm] PCIE GART of 1024M enabled. [21968.947216] [drm] PTB located at 0x000000F43FC00000 [21968.947353] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [21968.948737] nvme nvme0: D3 entry latency set to 8 seconds [21968.949785] nvme nvme0: 8/0/0 default/read/poll queues [21968.952544] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [21968.953522] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [21968.954239] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [21968.956795] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [21968.958593] amdgpu: restore the fine grain parameters [21968.958789] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [21968.960778] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [21968.961621] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [21968.962421] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [21968.963957] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [21968.965328] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [21968.966310] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [21968.967327] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [21968.969476] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [21968.970257] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [21968.971113] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [21968.974748] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [21968.975820] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [21968.979633] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [21968.981218] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [21968.982112] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [21968.982863] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [21968.983884] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [21968.984925] OOM killer enabled. [21968.985040] Restarting tasks: Starting [21968.985142] usb 3-1: USB disconnect, device number 11 [21968.985381] Restarting tasks: Done [21968.985477] random: crng reseeded on system resumption [21968.985581] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [21968.985673] Bluetooth: hci0: RTL: rom_version status=0 version=3 [21968.985742] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [21968.985860] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [21968.985970] PM: suspend exit [21968.986041] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [21969.044066] usb 3-1: new full-speed USB device number 12 using xhci_hcd [21969.203164] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [21969.203916] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [21969.204482] usb 3-1: Product: Goodix Fingerprint Device [21969.204997] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [21969.405056] Bluetooth: hci0: RTL: fw version 0x2b66d962 [21969.551058] Bluetooth: hci0: AOSP extensions version v1.00 [21969.551324] Bluetooth: hci0: AOSP quality report is supported [21969.551395] Bluetooth: MGMT ver 1.23 [21973.632068] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [21973.783069] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [21973.787030] wlan0: authenticated [21973.787150] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [21973.793060] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=4) [21973.794052] wlan0: associated [21973.855076] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [22021.570057] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [22021.787136] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [22021.939062] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [22021.943044] wlan0: authenticated [22021.947052] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [22021.953051] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [22021.953242] wlan0: associated [22021.957063] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [22154.688040] input: ... (AVRCP) as /devices/virtual/input/input25 [22780.411034] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [22780.634115] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [22780.785037] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [22780.789035] wlan0: authenticated [22780.795048] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [22780.801037] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=6) [22780.801280] wlan0: associated [22780.874044] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [22885.298037] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [22885.516139] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [22885.683041] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [22885.687037] wlan0: authenticated [22885.689032] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [22885.698049] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [22885.698228] wlan0: associated [22885.712046] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [23761.544047] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [23761.762170] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [23761.915047] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [23761.919056] wlan0: authenticated [23761.927038] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [23761.933037] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=6) [23761.933170] wlan0: associated [23762.026122] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [23999.483058] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [23999.708042] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [23999.871036] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [23999.875027] wlan0: authenticated [23999.877031] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [23999.899227] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [23999.899375] wlan0: associated [23999.967044] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [25965.021050] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [25966.239030] PM: suspend entry (deep) [25966.287268] Filesystems sync: 0.048 seconds [25967.258929] Freezing user space processes [25967.260140] Freezing user space processes completed (elapsed 0.002 seconds) [25967.260264] OOM killer disabled. [25967.260384] Freezing remaining freezable tasks [25967.260479] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [25967.260594] printk: Suspending console(s) (use no_console_suspend to debug) [25967.260728] ACPI: EC: interrupt blocked [25967.260855] ACPI: PM: Preparing to enter system sleep state S3 [25967.260987] ACPI: EC: event blocked [25967.261126] ACPI: EC: EC stopped [25967.261246] ACPI: PM: Saving platform NVS memory [25967.261367] Disabling non-boot CPUs ... [25967.261477] smpboot: CPU 7 is now offline [25967.261585] smpboot: CPU 6 is now offline [25967.261699] smpboot: CPU 5 is now offline [25967.262076] smpboot: CPU 4 is now offline [25967.262343] smpboot: CPU 3 is now offline [25967.262567] smpboot: CPU 2 is now offline [25967.262821] smpboot: CPU 1 is now offline [25967.263124] ACPI: PM: Low-level resume complete [25967.263388] ACPI: EC: EC started [25967.263614] ACPI: PM: Restoring platform NVS memory [25967.263792] AMD-Vi: Virtual APIC enabled [25967.264974] AMD-Vi: Virtual APIC enabled [25967.265229] Enabling non-boot CPUs ... [25967.265433] smpboot: Booting Node 0 Processor 1 APIC 0x1 [25967.265580] CPU1 is up [25967.265787] smpboot: Booting Node 0 Processor 2 APIC 0x2 [25967.265981] CPU2 is up [25967.266166] smpboot: Booting Node 0 Processor 3 APIC 0x3 [25967.266328] CPU3 is up [25967.266505] smpboot: Booting Node 0 Processor 4 APIC 0x4 [25967.266689] CPU4 is up [25967.266869] smpboot: Booting Node 0 Processor 5 APIC 0x5 [25967.267088] CPU5 is up [25967.267294] smpboot: Booting Node 0 Processor 6 APIC 0x6 [25967.267390] CPU6 is up [25967.267496] smpboot: Booting Node 0 Processor 7 APIC 0x7 [25967.267589] CPU7 is up [25967.268456] ACPI: PM: Waking up from system sleep state S3 [25967.268563] ACPI: EC: interrupt unblocked [25967.270195] ACPI: EC: event unblocked [25967.270303] [drm] PCIE GART of 1024M enabled. [25967.270391] [drm] PTB located at 0x000000F43FC00000 [25967.270460] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [25967.271563] nvme nvme0: D3 entry latency set to 8 seconds [25967.272483] nvme nvme0: 8/0/0 default/read/poll queues [25967.273073] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [25967.273884] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [25967.274708] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [25967.282510] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [25967.283440] amdgpu: restore the fine grain parameters [25967.283519] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [25967.308585] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [25967.310838] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [25967.312946] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [25967.313605] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [25967.314320] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [25967.315743] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [25967.316503] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [25967.317133] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [25967.317638] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [25967.318158] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [25967.318660] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [25967.321291] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [25967.321782] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [25967.322256] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [25967.322622] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [25967.323092] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [25967.323649] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [25967.324178] OOM killer enabled. [25967.324230] Restarting tasks: Starting [25967.324279] usb 3-1: USB disconnect, device number 12 [25967.324403] Restarting tasks: Done [25967.324453] random: crng reseeded on system resumption [25967.324509] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [25967.324561] PM: suspend exit [25967.324608] Bluetooth: hci0: RTL: rom_version status=0 version=3 [25967.324651] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [25967.324695] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [25967.324734] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [25967.378081] usb 3-1: new full-speed USB device number 13 using xhci_hcd [25967.540189] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [25967.540466] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [25967.540602] usb 3-1: Product: Goodix Fingerprint Device [25967.540718] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [25967.750045] Bluetooth: hci0: RTL: fw version 0x2b66d962 [25967.896056] Bluetooth: hci0: AOSP extensions version v1.00 [25967.896191] Bluetooth: hci0: AOSP quality report is supported [25967.897724] Bluetooth: MGMT ver 1.23 [25971.978116] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [25972.039047] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [25972.042025] wlan0: authenticated [25972.042124] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [25972.048037] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [25972.049267] wlan0: associated [25972.079043] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [26485.541181] input: ... (AVRCP) as /devices/virtual/input/input26 [26539.910064] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [26540.135121] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [26540.286036] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26540.290025] wlan0: authenticated [26540.290114] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [26540.296044] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=10) [26540.297052] wlan0: associated [26540.375045] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [26615.933051] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [26616.156052] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [26616.318036] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26616.322041] wlan0: authenticated [26616.327045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [26616.333053] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [26616.333271] wlan0: associated [26616.381053] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [27841.265062] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [27842.515054] PM: suspend entry (deep) [27842.580043] Filesystems sync: 0.065 seconds [27843.604172] Freezing user space processes [27843.604905] Freezing user space processes completed (elapsed 0.003 seconds) [27843.605951] OOM killer disabled. [27843.607043] Freezing remaining freezable tasks [27843.607297] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [27843.607515] printk: Suspending console(s) (use no_console_suspend to debug) [27843.607813] ACPI: EC: interrupt blocked [27843.608113] ACPI: PM: Preparing to enter system sleep state S3 [27843.608399] ACPI: EC: event blocked [27843.608631] ACPI: EC: EC stopped [27843.608894] ACPI: PM: Saving platform NVS memory [27843.609243] Disabling non-boot CPUs ... [27843.610472] smpboot: CPU 7 is now offline [27843.610954] smpboot: CPU 6 is now offline [27843.612176] smpboot: CPU 5 is now offline [27843.617930] smpboot: CPU 4 is now offline [27843.618497] smpboot: CPU 3 is now offline [27843.618793] smpboot: CPU 2 is now offline [27843.619111] smpboot: CPU 1 is now offline [27843.619527] ACPI: PM: Low-level resume complete [27843.620798] ACPI: EC: EC started [27843.621188] ACPI: PM: Restoring platform NVS memory [27843.621688] AMD-Vi: Virtual APIC enabled [27843.621882] AMD-Vi: Virtual APIC enabled [27843.622077] Enabling non-boot CPUs ... [27843.622130] smpboot: Booting Node 0 Processor 1 APIC 0x1 [27843.622172] CPU1 is up [27843.622322] smpboot: Booting Node 0 Processor 2 APIC 0x2 [27843.622513] CPU2 is up [27843.622613] smpboot: Booting Node 0 Processor 3 APIC 0x3 [27843.622959] CPU3 is up [27843.623132] smpboot: Booting Node 0 Processor 4 APIC 0x4 [27843.623224] CPU4 is up [27843.623288] smpboot: Booting Node 0 Processor 5 APIC 0x5 [27843.623346] CPU5 is up [27843.623423] smpboot: Booting Node 0 Processor 6 APIC 0x6 [27843.623598] CPU6 is up [27843.623689] smpboot: Booting Node 0 Processor 7 APIC 0x7 [27843.623752] CPU7 is up [27843.623833] ACPI: PM: Waking up from system sleep state S3 [27843.623944] ACPI: EC: interrupt unblocked [27843.624033] ACPI: EC: event unblocked [27843.624148] [drm] PCIE GART of 1024M enabled. [27843.624237] [drm] PTB located at 0x000000F43FC00000 [27843.624297] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [27843.625613] nvme nvme0: D3 entry latency set to 8 seconds [27843.626212] nvme nvme0: 8/0/0 default/read/poll queues [27843.626791] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [27843.628093] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [27843.628901] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [27843.629675] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [27843.630509] amdgpu: restore the fine grain parameters [27843.630660] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [27843.631403] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [27843.632394] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [27843.633060] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [27843.633687] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [27843.634374] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [27843.635158] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [27843.635945] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [27843.636638] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [27843.637383] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [27843.638253] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [27843.638967] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [27843.639600] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [27843.640196] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [27843.640767] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [27843.641414] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [27843.641995] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [27843.642702] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [27843.643380] OOM killer enabled. [27843.643444] Restarting tasks: Starting [27843.643518] usb 3-1: USB disconnect, device number 13 [27843.643701] Restarting tasks: Done [27843.643765] random: crng reseeded on system resumption [27843.643833] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [27843.643912] PM: suspend exit [27843.643980] Bluetooth: hci0: RTL: rom_version status=0 version=3 [27843.644073] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [27843.644137] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [27843.644208] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [27843.736062] usb 3-1: new full-speed USB device number 14 using xhci_hcd [27843.897084] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [27843.897896] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [27843.898618] usb 3-1: Product: Goodix Fingerprint Device [27843.899305] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [27844.087347] Bluetooth: hci0: RTL: fw version 0x2b66d962 [27844.233151] Bluetooth: hci0: AOSP extensions version v1.00 [27844.233318] Bluetooth: hci0: AOSP quality report is supported [27844.233399] Bluetooth: MGMT ver 1.23 [27846.566063] input: Logitech Wireless Mouse MX Master 3 as /devices/virtual/misc/uhid/0005:046D:B023.0005/input/input27 [27846.566234] logitech-hidpp-device 0005:046D:B023.0005: input,hidraw1: BLUETOOTH HID v0.15 Keyboard [Logitech Wireless Mouse MX Master 3] on XX:XX:XX:XX:XX:XX [27846.589051] logitech-hidpp-device 0005:046D:B023.0005: HID++ 4.5 device connected. [27848.198302] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [27848.347059] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [27848.351044] wlan0: authenticated [27848.353050] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [27848.357061] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=53) [27848.357309] wlan0: associated [27848.444506] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [27877.373314] usb 1-2: new low-speed USB device number 4 using xhci_hcd [27877.515063] usb 1-2: New USB device found, idVendor=0e6a, idProduct=6000, bcdDevice= 0.08 [27877.516232] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [27877.516956] usb 1-2: Product: USB Device [27877.517696] usb 1-2: Manufacturer: Eleen [27877.541082] input: Eleen USB Device as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2:1.0/0003:0E6A:6000.0006/input/input28 [27877.616061] hid-generic 0003:0E6A:6000.0006: input,hidraw2: USB HID v1.10 Keyboard [Eleen USB Device] on usb-0000:03:00.3-2/input0 [28110.650068] input: ... (AVRCP) as /devices/virtual/input/input29 [28153.583061] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [28153.806038] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [28153.967045] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28153.971053] wlan0: authenticated [28153.976040] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28153.982053] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=19) [28153.983182] wlan0: associated [28154.038046] wlan0: Limiting TX power to 17 (20 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [28181.276058] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [28182.267053] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [28182.349063] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [28182.349294] wlan0: authenticated [28182.350184] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [28182.461093] wlan0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [28182.467048] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=19) [28182.467224] wlan0: associated [28182.539044] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [29977.646165] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [29981.783044] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [29981.933143] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29981.937031] wlan0: authenticated [29981.943050] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29981.953064] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [29981.955923] wlan0: associated [29982.042058] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [29996.064050] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [29996.284180] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [29996.468040] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29996.472919] wlan0: authenticated [29996.479048] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29996.491062] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=26) [29996.492563] wlan0: associated [29996.525037] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [31792.197147] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [31792.447079] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [31792.536379] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [31792.538167] wlan0: authenticated [31792.538273] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [31792.544047] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=32) [31792.544234] wlan0: associated [31792.611068] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [33588.294054] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [33592.494052] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [33592.667199] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [33592.677133] wlan0: authenticated [33592.678058] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [33592.683039] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [33592.685833] wlan0: associated [33592.723050] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [33623.542050] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [33623.768129] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [33623.939066] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [33623.949347] wlan0: authenticated [33623.949429] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [33623.949625] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=34) [33623.949842] wlan0: associated [33624.015044] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [35419.465075] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [35419.720197] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [35419.795069] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [35419.799216] wlan0: authenticated [35419.799319] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [35419.812065] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=41) [35419.812330] wlan0: associated [35419.883070] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [36849.593072] input: ... (AVRCP) as /devices/virtual/input/input30 [37215.488284] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [37219.617040] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [37219.770156] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37219.774075] wlan0: authenticated [37219.776045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37219.783266] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [37219.783469] wlan0: associated [37219.811038] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [37290.222041] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [37290.446100] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [37290.629049] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37290.633045] wlan0: authenticated [37290.635044] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37290.646044] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=59) [37290.646219] wlan0: associated [37290.676036] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [39086.346075] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [39086.606309] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [39086.683045] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39086.692112] wlan0: authenticated [39086.692354] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39086.695062] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=77) [39086.695287] wlan0: associated [39086.774110] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [40329.847073] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [40330.627037] PM: suspend entry (deep) [40330.652162] Filesystems sync: 0.025 seconds [40331.645113] Freezing user space processes [40331.645817] Freezing user space processes completed (elapsed 0.002 seconds) [40331.645883] OOM killer disabled. [40331.645939] Freezing remaining freezable tasks [40331.645997] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [40331.646340] printk: Suspending console(s) (use no_console_suspend to debug) [40331.646432] ACPI: EC: interrupt blocked [40331.646494] ACPI: PM: Preparing to enter system sleep state S3 [40331.646552] ACPI: EC: event blocked [40331.646623] ACPI: EC: EC stopped [40331.646685] ACPI: PM: Saving platform NVS memory [40331.646738] Disabling non-boot CPUs ... [40331.646798] smpboot: CPU 7 is now offline [40331.646854] smpboot: CPU 6 is now offline [40331.646909] smpboot: CPU 5 is now offline [40331.646962] smpboot: CPU 4 is now offline [40331.647098] smpboot: CPU 3 is now offline [40331.647176] smpboot: CPU 2 is now offline [40331.647258] smpboot: CPU 1 is now offline [40331.647329] ACPI: PM: Low-level resume complete [40331.647393] ACPI: EC: EC started [40331.647441] ACPI: PM: Restoring platform NVS memory [40331.647474] AMD-Vi: Virtual APIC enabled [40331.647514] AMD-Vi: Virtual APIC enabled [40331.647561] Enabling non-boot CPUs ... [40331.647615] smpboot: Booting Node 0 Processor 1 APIC 0x1 [40331.647668] CPU1 is up [40331.647721] smpboot: Booting Node 0 Processor 2 APIC 0x2 [40331.647777] CPU2 is up [40331.647856] smpboot: Booting Node 0 Processor 3 APIC 0x3 [40331.647907] CPU3 is up [40331.647958] smpboot: Booting Node 0 Processor 4 APIC 0x4 [40331.648048] CPU4 is up [40331.648108] smpboot: Booting Node 0 Processor 5 APIC 0x5 [40331.648158] CPU5 is up [40331.648252] smpboot: Booting Node 0 Processor 6 APIC 0x6 [40331.648338] CPU6 is up [40331.648406] smpboot: Booting Node 0 Processor 7 APIC 0x7 [40331.648457] CPU7 is up [40331.648509] ACPI: PM: Waking up from system sleep state S3 [40331.648571] ACPI: EC: interrupt unblocked [40331.648624] pcieport 0000:00:08.1: PME: Spurious native interrupt! [40331.654348] ACPI: EC: event unblocked [40331.654850] [drm] PCIE GART of 1024M enabled. [40331.655343] [drm] PTB located at 0x000000F43FC00000 [40331.655473] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [40331.656035] nvme nvme0: D3 entry latency set to 8 seconds [40331.656434] nvme nvme0: 8/0/0 default/read/poll queues [40331.656868] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [40331.657343] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [40331.657752] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [40331.658200] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [40331.658699] amdgpu: restore the fine grain parameters [40331.658805] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [40331.659275] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [40331.659811] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [40331.660941] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [40331.662927] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [40331.664723] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [40331.665923] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [40331.668739] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [40331.683764] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [40331.686329] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [40331.687620] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [40331.688846] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [40331.689452] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [40331.690218] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [40331.691181] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [40331.691859] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [40331.692550] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [40331.693112] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [40331.694225] OOM killer enabled. [40331.694868] Restarting tasks: Starting [40331.695118] usb 3-1: USB disconnect, device number 14 [40331.695453] Restarting tasks: Done [40331.695597] random: crng reseeded on system resumption [40331.695641] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [40331.695707] PM: suspend exit [40331.695768] Bluetooth: hci0: RTL: rom_version status=0 version=3 [40331.695816] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [40331.695857] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [40331.695897] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [40331.768036] usb 3-1: new full-speed USB device number 15 using xhci_hcd [40331.929098] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [40331.929289] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [40331.929684] usb 3-1: Product: Goodix Fingerprint Device [40331.929984] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [40332.146042] Bluetooth: hci0: RTL: fw version 0x2b66d962 [40332.292106] Bluetooth: hci0: AOSP extensions version v1.00 [40332.292322] Bluetooth: hci0: AOSP quality report is supported [40332.292394] Bluetooth: MGMT ver 1.23 [40336.245157] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [40336.316081] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [40336.319193] wlan0: authenticated [40336.319291] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [40336.326129] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=5) [40336.326303] wlan0: associated [40336.383042] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [40346.151057] input: Logitech Wireless Mouse MX Master 3 as /devices/virtual/misc/uhid/0005:046D:B023.0007/input/input31 [40346.151269] logitech-hidpp-device 0005:046D:B023.0007: input,hidraw1: BLUETOOTH HID v0.15 Keyboard [Logitech Wireless Mouse MX Master 3] on XX:XX:XX:XX:XX:XX [40346.174056] logitech-hidpp-device 0005:046D:B023.0007: HID++ 4.5 device connected. [41677.611060] input: ... (AVRCP) as /devices/virtual/input/input32 [42132.536306] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [42136.694044] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [42136.854032] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [42136.858140] wlan0: authenticated [42136.864090] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [42136.870031] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=3) [42136.870144] wlan0: associated [42136.929052] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [42204.594040] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [42204.824177] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [42205.006033] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [42205.009146] wlan0: authenticated [42205.015074] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [42205.029051] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=9) [42205.029215] wlan0: associated [42205.070052] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [44000.671080] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [44000.921060] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [44001.004603] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [44001.005628] wlan0: authenticated [44001.005888] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [44001.012939] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=20) [44001.013214] wlan0: associated [44001.112056] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [44421.837071] input: Logitech Wireless Mouse MX Master 3 as /devices/virtual/misc/uhid/0005:046D:B023.0008/input/input33 [44421.843142] logitech-hidpp-device 0005:046D:B023.0008: input,hidraw1: BLUETOOTH HID v0.15 Keyboard [Logitech Wireless Mouse MX Master 3] on XX:XX:XX:XX:XX:XX [44421.873038] logitech-hidpp-device 0005:046D:B023.0008: HID++ 4.5 device connected. [45797.136083] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [45801.275052] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [45801.434197] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [45801.542051] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [45801.547695] wlan0: authenticated [45801.547981] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [45801.552416] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [45801.552517] wlan0: associated [45801.651057] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [45811.601050] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [45811.822170] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [45811.996050] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [45812.000155] wlan0: authenticated [45812.006057] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [45812.012261] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=29) [45812.013240] wlan0: associated [45812.024036] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [47607.801281] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [47608.052146] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [47608.134676] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [47608.136054] wlan0: authenticated [47608.136211] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [47608.143051] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=33) [47608.143290] wlan0: associated [47608.232050] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [49403.734095] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [49407.881072] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [49408.035194] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [49408.045165] wlan0: authenticated [49408.046553] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [49408.051195] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [49408.051482] wlan0: associated [49408.078051] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [49415.453062] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [49415.662053] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [49415.834059] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [49415.838211] wlan0: authenticated [49415.847053] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [49415.853075] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=39) [49415.854057] wlan0: associated [49415.931062] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [51211.618098] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [51211.888216] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [51211.968066] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [51211.971027] wlan0: authenticated [51211.971108] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [51211.978241] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=44) [51211.978442] wlan0: associated [51212.137055] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [53007.512152] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [53011.660043] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [53011.812045] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [53011.817063] wlan0: authenticated [53011.822082] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [53011.829663] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=2) [53011.829847] wlan0: associated [53011.871062] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [53019.825054] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [53020.056091] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [53020.230039] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [53020.234060] wlan0: authenticated [53020.241168] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [53020.247054] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=52) [53020.249153] wlan0: associated [53020.348311] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [54816.011151] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [54816.264216] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [54816.341070] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [54816.344057] wlan0: authenticated [54816.344201] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [54816.351505] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=70) [54816.351668] wlan0: associated [54816.445076] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [54919.431107] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [54920.304763] PM: suspend entry (deep) [54920.351265] Filesystems sync: 0.048 seconds [54921.244447] Freezing user space processes [54921.254567] Freezing user space processes completed (elapsed 0.002 seconds) [54921.256821] OOM killer disabled. [54921.257114] Freezing remaining freezable tasks [54921.257393] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [54921.257619] printk: Suspending console(s) (use no_console_suspend to debug) [54921.257834] ACPI: EC: interrupt blocked [54921.258097] ACPI: PM: Preparing to enter system sleep state S3 [54921.258555] ACPI: EC: event blocked [54921.258781] ACPI: EC: EC stopped [54921.259028] ACPI: PM: Saving platform NVS memory [54921.259230] Disabling non-boot CPUs ... [54921.259414] smpboot: CPU 7 is now offline [54921.259620] smpboot: CPU 6 is now offline [54921.259817] smpboot: CPU 5 is now offline [54921.260182] smpboot: CPU 4 is now offline [54921.260415] smpboot: CPU 3 is now offline [54921.260766] smpboot: CPU 2 is now offline [54921.261162] smpboot: CPU 1 is now offline [54921.261637] ACPI: PM: Low-level resume complete [54921.261801] ACPI: EC: EC started [54921.262188] ACPI: PM: Restoring platform NVS memory [54921.262524] AMD-Vi: Virtual APIC enabled [54921.262619] AMD-Vi: Virtual APIC enabled [54921.262663] Enabling non-boot CPUs ... [54921.262704] smpboot: Booting Node 0 Processor 1 APIC 0x1 [54921.263712] CPU1 is up [54921.263875] smpboot: Booting Node 0 Processor 2 APIC 0x2 [54921.263996] CPU2 is up [54921.264098] smpboot: Booting Node 0 Processor 3 APIC 0x3 [54921.264161] CPU3 is up [54921.264295] smpboot: Booting Node 0 Processor 4 APIC 0x4 [54921.264426] CPU4 is up [54921.264630] smpboot: Booting Node 0 Processor 5 APIC 0x5 [54921.264763] CPU5 is up [54921.264836] smpboot: Booting Node 0 Processor 6 APIC 0x6 [54921.264899] CPU6 is up [54921.264962] smpboot: Booting Node 0 Processor 7 APIC 0x7 [54921.271146] CPU7 is up [54921.271256] ACPI: PM: Waking up from system sleep state S3 [54921.271321] ACPI: EC: interrupt unblocked [54921.271402] ACPI: EC: event unblocked [54921.271463] [drm] PCIE GART of 1024M enabled. [54921.271545] [drm] PTB located at 0x000000F43FC00000 [54921.271607] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [54921.393897] nvme nvme0: D3 entry latency set to 8 seconds [54921.404961] nvme nvme0: 8/0/0 default/read/poll queues [54921.409929] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [54921.417570] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [54921.418835] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [54921.421638] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [54921.422601] amdgpu: restore the fine grain parameters [54921.422812] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [54921.423616] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [54921.427147] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [54921.428027] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [54921.428761] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [54921.429981] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [54921.430742] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [54921.431476] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [54921.432991] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [54921.434446] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [54921.435534] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [54921.436236] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [54921.436889] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [54921.437550] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [54921.438157] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [54921.438945] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [54921.439896] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [54921.441206] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [54921.442049] OOM killer enabled. [54921.442212] Restarting tasks: Starting [54921.442299] usb 3-1: USB disconnect, device number 15 [54921.442495] Restarting tasks: Done [54921.442614] random: crng reseeded on system resumption [54921.442725] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [54921.442790] PM: suspend exit [54921.442892] Bluetooth: hci0: RTL: rom_version status=0 version=3 [54921.442974] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [54921.443130] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [54921.443205] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [54921.443310] usb 3-1: new full-speed USB device number 16 using xhci_hcd [54921.545097] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [54921.545550] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [54921.546957] usb 3-1: Product: Goodix Fingerprint Device [54921.548456] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [54921.735437] Bluetooth: hci0: RTL: fw version 0x2b66d962 [54921.881041] Bluetooth: hci0: AOSP extensions version v1.00 [54921.881214] Bluetooth: hci0: AOSP quality report is supported [54921.881274] Bluetooth: MGMT ver 1.23 [54925.618085] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [54925.700215] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [54925.703053] wlan0: authenticated [54925.703177] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [54925.709085] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=70) [54925.709275] wlan0: associated [54925.743044] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [54935.193059] input: Logitech Wireless Mouse MX Master 3 as /devices/virtual/misc/uhid/0005:046D:B023.0009/input/input34 [54935.194058] logitech-hidpp-device 0005:046D:B023.0009: input,hidraw1: BLUETOOTH HID v0.15 Keyboard [Logitech Wireless Mouse MX Master 3] on XX:XX:XX:XX:XX:XX [54935.231043] logitech-hidpp-device 0005:046D:B023.0009: HID++ 4.5 device connected. [54993.815106] usb 1-2: USB disconnect, device number 4 [54999.035139] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [55000.044043] PM: suspend entry (deep) [55000.115051] Filesystems sync: 0.071 seconds [55000.976141] Freezing user space processes [55000.977125] Freezing user space processes completed (elapsed 0.002 seconds) [55000.977268] OOM killer disabled. [55000.977388] Freezing remaining freezable tasks [55000.977483] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [55000.977571] printk: Suspending console(s) (use no_console_suspend to debug) [55000.977677] ACPI: EC: interrupt blocked [55000.979583] ACPI: PM: Preparing to enter system sleep state S3 [55000.979702] ACPI: EC: event blocked [55000.979818] ACPI: EC: EC stopped [55000.979927] ACPI: PM: Saving platform NVS memory [55000.980097] Disabling non-boot CPUs ... [55000.980213] smpboot: CPU 7 is now offline [55000.980305] smpboot: CPU 6 is now offline [55000.980390] smpboot: CPU 5 is now offline [55000.980476] smpboot: CPU 4 is now offline [55000.980589] smpboot: CPU 3 is now offline [55000.980673] smpboot: CPU 2 is now offline [55000.980754] smpboot: CPU 1 is now offline [55000.980881] ACPI: PM: Low-level resume complete [55000.980990] ACPI: EC: EC started [55000.981071] ACPI: PM: Restoring platform NVS memory [55000.981118] AMD-Vi: Virtual APIC enabled [55000.981209] AMD-Vi: Virtual APIC enabled [55000.981279] Enabling non-boot CPUs ... [55000.981369] smpboot: Booting Node 0 Processor 1 APIC 0x1 [55000.981442] CPU1 is up [55000.981578] smpboot: Booting Node 0 Processor 2 APIC 0x2 [55000.981690] CPU2 is up [55000.981787] smpboot: Booting Node 0 Processor 3 APIC 0x3 [55000.981885] CPU3 is up [55000.982289] smpboot: Booting Node 0 Processor 4 APIC 0x4 [55000.982396] CPU4 is up [55000.982496] smpboot: Booting Node 0 Processor 5 APIC 0x5 [55000.982580] CPU5 is up [55000.982664] smpboot: Booting Node 0 Processor 6 APIC 0x6 [55000.982768] CPU6 is up [55000.982879] smpboot: Booting Node 0 Processor 7 APIC 0x7 [55000.982967] CPU7 is up [55000.983092] ACPI: PM: Waking up from system sleep state S3 [55000.983196] ACPI: EC: interrupt unblocked [55000.983279] ACPI: EC: event unblocked [55000.983451] [drm] PCIE GART of 1024M enabled. [55000.983548] [drm] PTB located at 0x000000F43FC00000 [55000.983633] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [55000.986993] nvme nvme0: D3 entry latency set to 8 seconds [55000.988616] nvme nvme0: 8/0/0 default/read/poll queues [55000.989211] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [55000.989920] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [55000.990841] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [55000.991795] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [55000.992698] amdgpu: restore the fine grain parameters [55000.992917] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [55000.993838] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [55000.994868] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [55000.996151] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [55000.997449] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [55000.998234] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [55000.999301] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [55001.000288] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [55001.001109] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [55001.001897] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [55001.002676] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [55001.003623] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [55001.004532] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [55001.005393] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [55001.006460] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [55001.010127] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [55001.028876] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [55001.032647] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [55001.035195] OOM killer enabled. [55001.035572] Restarting tasks: Starting [55001.035912] usb 3-1: USB disconnect, device number 16 [55001.036544] Restarting tasks: Done [55001.036858] random: crng reseeded on system resumption [55001.039377] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [55001.039493] PM: suspend exit [55001.039567] Bluetooth: hci0: RTL: rom_version status=0 version=3 [55001.039631] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [55001.039719] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [55001.039821] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [55001.108584] usb 3-1: new full-speed USB device number 17 using xhci_hcd [55001.279402] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [55001.280365] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [55001.281191] usb 3-1: Product: Goodix Fingerprint Device [55001.281914] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [55001.470281] Bluetooth: hci0: RTL: fw version 0x2b66d962 [55001.616071] Bluetooth: hci0: AOSP extensions version v1.00 [55001.616299] Bluetooth: hci0: AOSP quality report is supported [55001.617058] Bluetooth: MGMT ver 1.23 [55005.703099] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [55005.856089] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [55005.859055] wlan0: authenticated [55005.859186] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [55005.895098] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [55005.895377] wlan0: associated [55005.933072] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [55155.608067] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [55155.831042] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [55155.982040] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [55155.986044] wlan0: authenticated [55155.989054] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [55155.995047] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=17) [55155.996077] wlan0: associated [55156.075048] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [55206.814060] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [55207.029142] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [55207.187059] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [55207.198066] wlan0: authenticated [55207.200059] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [55207.211073] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=4) [55207.211265] wlan0: associated [55207.253063] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [56191.607084] input: ... (AVRCP) as /devices/virtual/input/input35 [56373.615059] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [56373.832050] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [56373.992057] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [56373.996165] wlan0: authenticated [56373.996270] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [56374.002065] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=21) [56374.002296] wlan0: associated [56374.024088] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [56751.603071] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [56751.825050] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [56751.976084] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [56751.980517] wlan0: authenticated [56751.991039] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [56751.997592] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=4) [56751.997809] wlan0: associated [56752.072080] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [57287.584299] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [57287.808071] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [57287.965819] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [57287.973269] wlan0: authenticated [57287.975474] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [57287.979051] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=21) [57287.980282] wlan0: associated [57288.043082] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [57324.949097] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [57325.171060] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [57325.322077] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [57325.326062] wlan0: authenticated [57325.336425] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [57325.342066] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=4) [57325.342332] wlan0: associated [57325.435060] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [57683.788067] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [57684.016156] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [57684.167110] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [57684.173360] wlan0: authenticated [57684.173569] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [57684.177463] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=22) [57684.177653] wlan0: associated [57684.230067] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [58847.578069] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [58847.784205] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [58847.937045] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [58847.941044] wlan0: authenticated [58847.943060] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [58847.964104] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=4) [58847.964513] wlan0: associated [58848.019071] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [59095.586064] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [59095.792120] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [59095.947240] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [59095.951308] wlan0: authenticated [59095.954370] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [59095.960069] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=25) [59095.963274] wlan0: associated [59096.032074] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [59551.609314] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [59551.847078] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [59552.002152] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [59552.009311] wlan0: authenticated [59552.011032] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [59552.016050] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=4) [59552.016270] wlan0: associated [59552.022127] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [60718.295082] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [60719.749156] PM: suspend entry (deep) [60719.807277] Filesystems sync: 0.058 seconds [60720.721577] Freezing user space processes [60720.722842] Freezing user space processes completed (elapsed 0.003 seconds) [60720.723248] OOM killer disabled. [60720.723543] Freezing remaining freezable tasks [60720.724088] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [60720.724303] printk: Suspending console(s) (use no_console_suspend to debug) [60720.724526] ACPI: EC: interrupt blocked [60720.724758] ACPI: PM: Preparing to enter system sleep state S3 [60720.724921] ACPI: EC: event blocked [60720.725125] ACPI: EC: EC stopped [60720.725288] ACPI: PM: Saving platform NVS memory [60720.725482] Disabling non-boot CPUs ... [60720.725647] smpboot: CPU 7 is now offline [60720.725836] smpboot: CPU 6 is now offline [60720.726036] smpboot: CPU 5 is now offline [60720.726229] smpboot: CPU 4 is now offline [60720.726390] smpboot: CPU 3 is now offline [60720.726556] smpboot: CPU 2 is now offline [60720.726750] smpboot: CPU 1 is now offline [60720.726906] ACPI: PM: Low-level resume complete [60720.727071] ACPI: EC: EC started [60720.727218] ACPI: PM: Restoring platform NVS memory [60720.727333] AMD-Vi: Virtual APIC enabled [60720.727377] AMD-Vi: Virtual APIC enabled [60720.727413] Enabling non-boot CPUs ... [60720.727452] smpboot: Booting Node 0 Processor 1 APIC 0x1 [60720.727495] CPU1 is up [60720.727553] smpboot: Booting Node 0 Processor 2 APIC 0x2 [60720.727636] CPU2 is up [60720.727707] smpboot: Booting Node 0 Processor 3 APIC 0x3 [60720.727763] CPU3 is up [60720.727842] smpboot: Booting Node 0 Processor 4 APIC 0x4 [60720.727915] CPU4 is up [60720.727986] smpboot: Booting Node 0 Processor 5 APIC 0x5 [60720.728094] CPU5 is up [60720.728179] smpboot: Booting Node 0 Processor 6 APIC 0x6 [60720.728248] CPU6 is up [60720.728323] smpboot: Booting Node 0 Processor 7 APIC 0x7 [60720.728403] CPU7 is up [60720.728627] ACPI: PM: Waking up from system sleep state S3 [60720.728705] ACPI: EC: interrupt unblocked [60720.728758] ACPI: EC: event unblocked [60720.728828] [drm] PCIE GART of 1024M enabled. [60720.728879] [drm] PTB located at 0x000000F43FC00000 [60720.728931] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [60720.733296] nvme nvme0: D3 entry latency set to 8 seconds [60720.734502] nvme nvme0: 8/0/0 default/read/poll queues [60720.735198] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [60720.735723] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [60720.736550] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [60720.737073] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [60720.737615] amdgpu: restore the fine grain parameters [60720.737678] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [60720.738240] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [60720.738684] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [60720.739231] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [60720.743087] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [60720.743975] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [60720.744635] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [60720.745343] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [60720.748959] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [60720.767222] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [60720.770209] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [60720.775557] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [60720.776433] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [60720.777458] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [60720.779676] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [60720.781389] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [60720.785194] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [60720.786690] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [60720.815793] OOM killer enabled. [60720.816561] Restarting tasks: Starting [60720.816795] usb 3-1: USB disconnect, device number 17 [60720.818443] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [60720.820858] Restarting tasks: Done [60720.823413] random: crng reseeded on system resumption [60720.825464] PM: suspend exit [60720.825774] Bluetooth: hci0: RTL: rom_version status=0 version=3 [60720.826099] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [60720.826188] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [60720.826271] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [60720.842897] usb 3-1: new full-speed USB device number 18 using xhci_hcd [60721.001120] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [60721.001635] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [60721.001996] usb 3-1: Product: Goodix Fingerprint Device [60721.002358] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [60721.208222] Bluetooth: hci0: RTL: fw version 0x2b66d962 [60721.354102] Bluetooth: hci0: AOSP extensions version v1.00 [60721.354653] Bluetooth: hci0: AOSP quality report is supported [60721.354737] Bluetooth: MGMT ver 1.23 [60724.936098] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [60725.088086] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [60725.092090] wlan0: authenticated [60725.094067] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [60725.099208] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=24) [60725.099479] wlan0: associated [60725.166081] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [60736.999087] input: ... (AVRCP) as /devices/virtual/input/input36 [60740.430067] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [60740.656177] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [60740.807082] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [60740.812090] wlan0: authenticated [60740.813405] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [60740.818066] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [60740.818319] wlan0: associated [60740.845034] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [60750.514051] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [60751.789276] PM: suspend entry (deep) [60751.838066] Filesystems sync: 0.048 seconds [60751.848045] Freezing user space processes [60752.673853] Freezing user space processes completed (elapsed 0.002 seconds) [60752.675279] OOM killer disabled. [60752.675407] Freezing remaining freezable tasks [60752.675546] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [60752.675663] printk: Suspending console(s) (use no_console_suspend to debug) [60752.675753] ACPI: EC: interrupt blocked [60752.675849] ACPI: PM: Preparing to enter system sleep state S3 [60752.675958] ACPI: EC: event blocked [60752.676137] ACPI: EC: EC stopped [60752.676409] ACPI: PM: Saving platform NVS memory [60752.676783] Disabling non-boot CPUs ... [60752.677028] smpboot: CPU 7 is now offline [60752.677268] smpboot: CPU 6 is now offline [60752.677446] smpboot: CPU 5 is now offline [60752.677649] smpboot: CPU 4 is now offline [60752.677859] smpboot: CPU 3 is now offline [60752.678072] smpboot: CPU 2 is now offline [60752.678277] smpboot: CPU 1 is now offline [60752.678521] ACPI: PM: Low-level resume complete [60752.678723] ACPI: EC: EC started [60752.678868] ACPI: PM: Restoring platform NVS memory [60752.679045] AMD-Vi: Virtual APIC enabled [60752.679222] AMD-Vi: Virtual APIC enabled [60752.679385] Enabling non-boot CPUs ... [60752.679591] smpboot: Booting Node 0 Processor 1 APIC 0x1 [60752.679770] CPU1 is up [60752.680030] smpboot: Booting Node 0 Processor 2 APIC 0x2 [60752.680250] CPU2 is up [60752.680473] smpboot: Booting Node 0 Processor 3 APIC 0x3 [60752.689633] CPU3 is up [60752.690804] smpboot: Booting Node 0 Processor 4 APIC 0x4 [60752.691666] CPU4 is up [60752.691768] smpboot: Booting Node 0 Processor 5 APIC 0x5 [60752.691880] CPU5 is up [60752.691968] smpboot: Booting Node 0 Processor 6 APIC 0x6 [60752.692108] CPU6 is up [60752.693070] smpboot: Booting Node 0 Processor 7 APIC 0x7 [60752.693227] CPU7 is up [60752.693350] ACPI: PM: Waking up from system sleep state S3 [60752.693455] ACPI: EC: interrupt unblocked [60752.693542] ACPI: EC: event unblocked [60752.693632] [drm] PCIE GART of 1024M enabled. [60752.693724] [drm] PTB located at 0x000000F43FC00000 [60752.693815] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [60752.694671] nvme nvme0: D3 entry latency set to 8 seconds [60752.695869] nvme nvme0: 8/0/0 default/read/poll queues [60752.697683] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [60752.698317] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [60752.698818] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [60752.699244] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [60752.699771] amdgpu: restore the fine grain parameters [60752.700395] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [60752.700857] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [60752.701342] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [60752.702196] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [60752.702857] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [60752.704281] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [60752.705235] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [60752.706701] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [60752.707206] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [60752.707640] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [60752.708705] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [60752.709469] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [60752.710059] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [60752.710643] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [60752.711290] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [60752.712044] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [60752.712776] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [60752.713297] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [60752.713740] OOM killer enabled. [60752.713793] Restarting tasks: Starting [60752.713843] usb 3-1: USB disconnect, device number 18 [60752.713996] Restarting tasks: Done [60752.714103] random: crng reseeded on system resumption [60752.714153] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [60752.714212] PM: suspend exit [60752.714272] Bluetooth: hci0: RTL: rom_version status=0 version=3 [60752.714328] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [60752.714394] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [60752.714449] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [60752.815703] usb 3-1: new full-speed USB device number 19 using xhci_hcd [60752.961123] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [60752.961653] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [60752.962031] usb 3-1: Product: Goodix Fingerprint Device [60752.962392] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [60753.166072] Bluetooth: hci0: RTL: fw version 0x2b66d962 [60753.312030] Bluetooth: hci0: AOSP extensions version v1.00 [60753.312178] Bluetooth: hci0: AOSP quality report is supported [60753.312237] Bluetooth: MGMT ver 1.23 [60754.345069] input: Logitech Wireless Mouse MX Master 3 as /devices/virtual/misc/uhid/0005:046D:B023.000A/input/input37 [60754.345267] logitech-hidpp-device 0005:046D:B023.000A: input,hidraw1: BLUETOOTH HID v0.15 Keyboard [Logitech Wireless Mouse MX Master 3] on XX:XX:XX:XX:XX:XX [60754.368092] logitech-hidpp-device 0005:046D:B023.000A: HID++ 4.5 device connected. [60757.250167] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [60757.422062] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [60757.426027] wlan0: authenticated [60757.426179] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [60757.432043] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [60757.432231] wlan0: associated [60757.525140] wlan0: Limiting TX power to 17 (20 - 3) dBm as advertised by XX:XX:XX:XX:XX:XX [60776.149092] usb 1-2: new low-speed USB device number 5 using xhci_hcd [60776.292061] usb 1-2: New USB device found, idVendor=0e6a, idProduct=6000, bcdDevice= 0.08 [60776.305650] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [60776.309330] usb 1-2: Product: USB Device [60776.309699] usb 1-2: Manufacturer: Eleen [60776.315029] input: Eleen USB Device as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-2/1-2:1.0/0003:0E6A:6000.000B/input/input38 [60776.382050] hid-generic 0003:0E6A:6000.000B: input,hidraw2: USB HID v1.10 Keyboard [Eleen USB Device] on usb-0000:03:00.3-2/input0 [60791.804189] input: ... (AVRCP) as /devices/virtual/input/input39 [60801.214553] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [60805.905058] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [60805.986179] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [60805.989051] wlan0: authenticated [60805.999035] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [60806.109062] wlan0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [60806.115050] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=8) [60806.115279] wlan0: associated [60806.185052] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [62601.730083] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [62605.860048] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [62606.011185] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [62606.015195] wlan0: authenticated [62606.020041] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [62606.026043] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [62606.030258] wlan0: associated [62606.093041] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [62622.793084] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [62623.007141] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [62623.193075] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [62623.198734] wlan0: authenticated [62623.200341] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [62623.206635] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [62623.206847] wlan0: associated [62623.242071] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [64418.821058] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [64419.051052] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [64419.141982] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [64419.142335] wlan0: authenticated [64419.142410] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [64419.142485] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=6) [64419.142589] wlan0: associated [64419.235051] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [66197.569052] input: ... (AVRCP) as /devices/virtual/input/input40 [66214.697060] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [66218.816084] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [66218.968280] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [66218.971925] wlan0: authenticated [66218.983068] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [66218.999053] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [66219.004334] wlan0: associated [66219.082139] wlan0: Limiting TX power to 7 dBm as advertised by XX:XX:XX:XX:XX:XX [66523.888060] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [66524.114467] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [66524.296044] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [66524.300058] wlan0: authenticated [66524.306056] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [66524.312052] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=10) [66524.313045] wlan0: associated [66524.399044] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [68320.027249] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [68320.288248] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [68320.368053] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [68320.371144] wlan0: authenticated [68320.371334] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [68320.378063] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=17) [68320.378415] wlan0: associated [68320.482071] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [70116.144201] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [70120.303094] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [70120.455197] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [70120.458558] wlan0: authenticated [70120.467048] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [70120.474225] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=2) [70120.474496] wlan0: associated [70120.659062] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [70425.313074] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [70425.542228] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [70425.705057] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [70425.709243] wlan0: authenticated [70425.715054] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [70425.721844] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=29) [70425.722098] wlan0: associated [70425.762050] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [70981.596080] input: ... (AVRCP) as /devices/virtual/input/input41 [72221.547073] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [72221.787060] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [72221.868419] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [72221.871052] wlan0: authenticated [72221.871205] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [72221.878081] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=40) [72221.878381] wlan0: associated [72221.961063] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [74018.120050] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [74022.309036] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [74022.390182] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [74022.393045] wlan0: authenticated [74022.396034] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [74022.403044] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=59) [74022.403217] wlan0: associated [74022.449451] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [75514.239041] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [75514.239175] wireguard: Copyright (C) A495-00C9 Jason A. Donenfeld <XXX@XXX>. All Rights Reserved. [75818.281053] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [75822.444039] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [75822.515189] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [75822.518043] wlan0: authenticated [75822.518230] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [75822.524046] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=70) [75822.525158] wlan0: associated [75822.613036] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [77618.187043] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [77622.373063] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [77622.524211] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [77622.527944] wlan0: authenticated [77622.538037] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [77622.544028] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [77622.544218] wlan0: associated [77622.683045] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [77927.283035] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [77927.515195] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [77927.690372] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [77927.694042] wlan0: authenticated [77927.700068] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [77927.706037] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=76) [77927.709156] wlan0: associated [77927.767106] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [78985.608048] input: ... (AVRCP) as /devices/virtual/input/input42 [79116.606057] input: ... (AVRCP) as /devices/virtual/input/input43 [79723.286089] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [79723.524053] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [79723.600186] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [79723.602067] wlan0: authenticated [79723.602488] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [79723.607079] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=78) [79723.608046] wlan0: associated [79723.654040] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [80211.157194] usb 1-3: new full-speed USB device number 6 using xhci_hcd [80211.297331] usb 1-3: New USB device found, idVendor=0d8c, idProduct=013c, bcdDevice= 1.00 [80211.299271] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [80211.300190] usb 1-3: Product: USB PnP Sound Device [80211.300913] usb 1-3: Manufacturer: C-Media Electronics Inc. [80211.316042] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:08.1/0000:03:00.3/usb1/1-3/1-3:1.3/0003:0D8C:013C.000C/input/input44 [80211.367065] hid-generic 0003:0D8C:013C.000C: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:03:00.3-3/input3 [80211.728061] usbcore: registered new interface driver snd-usb-audio [81353.996071] usb 1-3: USB disconnect, device number 6 [81519.350152] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [81523.505063] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [81523.658245] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [81523.662077] wlan0: authenticated [81523.671050] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [81523.677424] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [81523.684281] wlan0: associated [81523.732050] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [81535.616060] input: ... (AVRCP) as /devices/virtual/input/input45 [81579.784042] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [81580.010185] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [81580.189043] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [81580.193914] wlan0: authenticated [81580.196048] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [81580.206269] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=85) [81580.206449] wlan0: associated [81580.223067] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [83375.900100] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [83376.141050] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [83376.214525] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [83376.217101] wlan0: authenticated [83376.217184] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [83376.224319] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=87) [83376.224428] wlan0: associated [83376.314099] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [85171.972058] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [85176.165074] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [85176.315081] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [85176.319096] wlan0: authenticated [85176.331047] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [85176.337060] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [85176.342884] wlan0: associated [85176.400048] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [85242.969098] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [85243.192149] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [85243.374106] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [85243.377062] wlan0: authenticated [85243.379057] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [85243.394050] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=91) [85243.394298] wlan0: associated [85243.435066] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [87039.113188] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [87039.373248] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [87039.455039] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [87039.467885] wlan0: authenticated [87039.472743] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [87039.478790] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=94) [87039.479629] wlan0: associated [87039.530036] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [88835.336147] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [88839.476081] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [88839.625041] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [88839.635904] wlan0: authenticated [88839.639541] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [88839.642033] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [88839.642182] wlan0: associated [88839.716039] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [88873.551045] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [88873.763219] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [88873.937071] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [88873.941060] wlan0: authenticated [88873.953823] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [88873.954086] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=98) [88873.954351] wlan0: associated [88874.052061] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [90669.726068] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [90669.985247] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [90670.072674] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [90670.079469] wlan0: authenticated [90670.081709] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [90670.085446] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=109) [90670.085583] wlan0: associated [90670.142051] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [92465.757055] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 109=<unknown>) [92469.931044] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [92470.103047] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92470.112143] wlan0: authenticated [92470.119044] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92470.125042] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [92470.125340] wlan0: associated [92470.138043] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [92477.305070] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [92477.517069] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [92477.693065] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92477.697047] wlan0: authenticated [92477.702031] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92477.708032] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=121) [92477.708172] wlan0: associated [92477.722036] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [94273.404292] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 4=DISASSOC_DUE_TO_INACTIVITY) [94273.655315] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [94273.727657] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94273.733941] wlan0: authenticated [94273.734436] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [94273.739702] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=137) [94273.739972] wlan0: associated [94273.821056] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [94776.740340] wlan0: AP XX:XX:XX:XX:XX:XX appears to change mode (expected VHT, found legacy) in beacon, disconnect [94777.362125] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [94777.514176] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94777.526283] wlan0: authenticated [94777.526588] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [94777.539042] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x1431 status=0 aid=1) [94777.542090] wlan0: associated [94777.616119] wlan0: Limiting TX power to 4 dBm as advertised by XX:XX:XX:XX:XX:XX [94804.418079] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [94804.633052] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [94804.808071] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [94804.812084] wlan0: authenticated [94804.815055] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [94804.821285] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x1011 status=0 aid=139) [94804.822050] wlan0: associated [94804.837040] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [95664.287123] usb 1-2: USB disconnect, device number 5 [95674.029106] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [95675.046224] PM: suspend entry (deep) [95675.086043] Filesystems sync: 0.040 seconds [95676.161048] Freezing user space processes [95676.162177] Freezing user space processes completed (elapsed 0.002 seconds) [95676.164650] OOM killer disabled. [95676.164783] Freezing remaining freezable tasks [95676.164904] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [95676.164992] printk: Suspending console(s) (use no_console_suspend to debug) [95676.165126] ACPI: EC: interrupt blocked [95676.165350] ACPI: PM: Preparing to enter system sleep state S3 [95676.165512] ACPI: EC: event blocked [95676.165642] ACPI: EC: EC stopped [95676.165732] ACPI: PM: Saving platform NVS memory [95676.165846] Disabling non-boot CPUs ... [95676.168921] smpboot: CPU 7 is now offline [95676.170036] smpboot: CPU 6 is now offline [95676.170165] smpboot: CPU 5 is now offline [95676.170276] smpboot: CPU 4 is now offline [95676.170394] smpboot: CPU 3 is now offline [95676.170516] smpboot: CPU 2 is now offline [95676.170646] smpboot: CPU 1 is now offline [95676.170811] ACPI: PM: Low-level resume complete [95676.170923] ACPI: EC: EC started [95676.170985] ACPI: PM: Restoring platform NVS memory [95676.171063] AMD-Vi: Virtual APIC enabled [95676.171146] AMD-Vi: Virtual APIC enabled [95676.171194] Enabling non-boot CPUs ... [95676.171470] smpboot: Booting Node 0 Processor 1 APIC 0x1 [95676.171635] CPU1 is up [95676.171738] smpboot: Booting Node 0 Processor 2 APIC 0x2 [95676.171891] CPU2 is up [95676.171998] smpboot: Booting Node 0 Processor 3 APIC 0x3 [95676.172175] CPU3 is up [95676.172360] smpboot: Booting Node 0 Processor 4 APIC 0x4 [95676.172513] CPU4 is up [95676.172646] smpboot: Booting Node 0 Processor 5 APIC 0x5 [95676.172809] CPU5 is up [95676.172950] smpboot: Booting Node 0 Processor 6 APIC 0x6 [95676.173160] CPU6 is up [95676.173324] smpboot: Booting Node 0 Processor 7 APIC 0x7 [95676.173457] CPU7 is up [95676.173546] ACPI: PM: Waking up from system sleep state S3 [95676.173637] ACPI: EC: interrupt unblocked [95676.173758] ACPI: EC: event unblocked [95676.173876] [drm] PCIE GART of 1024M enabled. [95676.173970] [drm] PTB located at 0x000000F43FC00000 [95676.174073] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [95676.175380] nvme nvme0: D3 entry latency set to 8 seconds [95676.176598] nvme nvme0: 8/0/0 default/read/poll queues [95676.178493] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [95676.180961] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [95676.183569] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [95676.184534] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [95676.191197] amdgpu: restore the fine grain parameters [95676.197388] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [95676.204157] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [95676.204902] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [95676.205772] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [95676.206572] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [95676.207804] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [95676.213334] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [95676.215134] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [95676.215917] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [95676.220527] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [95676.221546] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [95676.224505] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [95676.225279] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [95676.227374] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [95676.228506] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [95676.229325] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [95676.230143] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [95676.230851] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [95676.231458] OOM killer enabled. [95676.231560] Restarting tasks: Starting [95676.231799] usb 3-1: USB disconnect, device number 19 [95676.231991] Restarting tasks: Done [95676.232113] random: crng reseeded on system resumption [95676.232177] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [95676.232232] PM: suspend exit [95676.232294] Bluetooth: hci0: RTL: rom_version status=0 version=3 [95676.232352] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [95676.232429] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [95676.232527] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [95676.289957] usb 3-1: new full-speed USB device number 20 using xhci_hcd [95676.445126] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [95676.445633] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [95676.446091] usb 3-1: Product: Goodix Fingerprint Device [95676.446483] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [95676.646223] Bluetooth: hci0: RTL: fw version 0x2b66d962 [95676.792139] Bluetooth: hci0: AOSP extensions version v1.00 [95676.792275] Bluetooth: hci0: AOSP quality report is supported [95676.792341] Bluetooth: MGMT ver 1.23 [95680.835034] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [95680.986036] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [95680.990034] wlan0: authenticated [95680.990128] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [95681.013043] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [95681.013234] wlan0: associated [95681.072042] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [95906.740896] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [95906.747606] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [95906.838037] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [95906.838669] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [95944.512038] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [95944.740122] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [95944.891059] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [95944.895034] wlan0: authenticated [95944.905054] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [95944.911046] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=41) [95944.911275] wlan0: associated [95944.943051] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [95992.807063] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [95993.026036] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [95993.190195] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [95993.194100] wlan0: authenticated [95993.194177] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [95993.203037] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [95993.204213] wlan0: associated [95993.291041] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [96132.652053] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [96132.871042] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [96133.023042] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [96133.027381] wlan0: authenticated [96133.033070] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [96133.054049] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=41) [96133.055633] wlan0: associated [96133.164026] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [96147.546030] input: ... (AVRCP) as /devices/virtual/input/input46 [96159.926148] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [96160.139039] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [96160.291369] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [96160.294148] wlan0: authenticated [96160.294276] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [96160.300872] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [96160.301409] wlan0: associated [96160.307047] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [97751.115028] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [97751.116426] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [97751.168039] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [97751.168701] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [98113.478052] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [98114.679289] PM: suspend entry (deep) [98114.714035] Filesystems sync: 0.035 seconds [98115.691961] Freezing user space processes [98115.692859] Freezing user space processes completed (elapsed 0.002 seconds) [98115.692995] OOM killer disabled. [98115.693101] Freezing remaining freezable tasks [98115.693149] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [98115.693197] printk: Suspending console(s) (use no_console_suspend to debug) [98115.693254] ACPI: EC: interrupt blocked [98115.693621] ACPI: PM: Preparing to enter system sleep state S3 [98115.693734] ACPI: EC: event blocked [98115.693824] ACPI: EC: EC stopped [98115.693889] ACPI: PM: Saving platform NVS memory [98115.693957] Disabling non-boot CPUs ... [98115.694224] smpboot: CPU 7 is now offline [98115.694352] smpboot: CPU 6 is now offline [98115.694498] smpboot: CPU 5 is now offline [98115.694608] smpboot: CPU 4 is now offline [98115.694763] smpboot: CPU 3 is now offline [98115.694889] smpboot: CPU 2 is now offline [98115.695101] smpboot: CPU 1 is now offline [98115.695263] ACPI: PM: Low-level resume complete [98115.695374] ACPI: EC: EC started [98115.695463] ACPI: PM: Restoring platform NVS memory [98115.695556] AMD-Vi: Virtual APIC enabled [98115.695636] AMD-Vi: Virtual APIC enabled [98115.695697] Enabling non-boot CPUs ... [98115.695844] smpboot: Booting Node 0 Processor 1 APIC 0x1 [98115.695946] CPU1 is up [98115.696105] smpboot: Booting Node 0 Processor 2 APIC 0x2 [98115.696245] CPU2 is up [98115.696343] smpboot: Booting Node 0 Processor 3 APIC 0x3 [98115.696456] CPU3 is up [98115.696571] smpboot: Booting Node 0 Processor 4 APIC 0x4 [98115.696693] CPU4 is up [98115.696844] smpboot: Booting Node 0 Processor 5 APIC 0x5 [98115.696978] CPU5 is up [98115.697148] smpboot: Booting Node 0 Processor 6 APIC 0x6 [98115.697298] CPU6 is up [98115.697411] smpboot: Booting Node 0 Processor 7 APIC 0x7 [98115.697542] CPU7 is up [98115.697671] ACPI: PM: Waking up from system sleep state S3 [98115.697797] ACPI: EC: interrupt unblocked [98115.697920] ACPI: EC: event unblocked [98115.698109] [drm] PCIE GART of 1024M enabled. [98115.699827] [drm] PTB located at 0x000000F43FC00000 [98115.699933] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [98115.701459] nvme nvme0: D3 entry latency set to 8 seconds [98115.703489] nvme nvme0: 8/0/0 default/read/poll queues [98115.704413] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [98115.705084] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [98115.705834] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [98115.707079] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [98115.708238] amdgpu: restore the fine grain parameters [98115.708470] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [98115.709615] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [98115.710733] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [98115.711709] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [98115.713894] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [98115.715235] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [98115.716781] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [98115.737692] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [98115.743919] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [98115.744953] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [98115.745713] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [98115.746487] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [98115.793206] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [98115.794033] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [98115.794854] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [98115.795763] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [98115.796556] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [98115.797375] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [98115.798090] OOM killer enabled. [98115.798264] Restarting tasks: Starting [98115.798545] usb 3-1: USB disconnect, device number 20 [98115.798884] Restarting tasks: Done [98115.799577] random: crng reseeded on system resumption [98115.799845] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [98115.800079] PM: suspend exit [98115.800434] Bluetooth: hci0: RTL: rom_version status=0 version=3 [98115.800542] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [98115.800595] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [98115.800669] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [98115.855644] usb 3-1: new full-speed USB device number 21 using xhci_hcd [98116.015344] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [98116.016049] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [98116.016500] usb 3-1: Product: Goodix Fingerprint Device [98116.017119] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [98116.178052] Bluetooth: hci0: RTL: fw version 0x2b66d962 [98116.324044] Bluetooth: hci0: AOSP extensions version v1.00 [98116.324177] Bluetooth: hci0: AOSP quality report is supported [98116.324225] Bluetooth: MGMT ver 1.23 [98119.930052] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [98119.990164] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [98120.011038] wlan0: authenticated [98120.011141] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [98120.017038] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [98120.018096] wlan0: associated [98120.098055] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [98123.945055] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [98123.945538] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [98124.145167] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [98124.145709] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [98136.556045] input: ... (AVRCP) as /devices/virtual/input/input47 [101994.405096] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [101994.411921] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [101994.472415] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [101994.472958] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [102005.296054] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [102005.520119] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [102005.673456] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [102005.676035] wlan0: authenticated [102005.686034] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [102005.713046] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=43) [102005.714043] wlan0: associated [102005.749042] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [102017.053046] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [102017.352055] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [102017.516209] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [102017.520038] wlan0: authenticated [102017.522030] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [102017.529034] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [102017.530027] wlan0: associated [102017.584032] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [102076.780046] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [102077.007158] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [102077.162049] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [102077.165045] wlan0: authenticated [102077.167074] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [102077.175042] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=43) [102077.177765] wlan0: associated [102077.225033] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [102357.747149] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [102357.973034] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [102358.137055] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [102358.141053] wlan0: authenticated [102358.146045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [102358.152037] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [102358.152229] wlan0: associated [102358.171049] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [103571.331034] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [103571.561034] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [103571.713037] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [103571.721119] wlan0: authenticated [103571.723034] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [103571.728050] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=41) [103571.728241] wlan0: associated [103571.761040] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [103864.695063] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [103864.922039] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [103865.085051] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [103865.088051] wlan0: authenticated [103865.090044] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [103865.098038] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [103865.099118] wlan0: associated [103865.109047] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104012.399054] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104012.616044] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104012.767057] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104012.771197] wlan0: authenticated [104012.771286] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104012.777049] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=42) [104012.777195] wlan0: associated [104012.799035] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104128.365160] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104128.596069] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104128.766134] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104128.770049] wlan0: authenticated [104128.770201] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104128.776038] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [104128.776183] wlan0: associated [104128.789035] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104198.555140] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104198.789039] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104198.951138] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104198.954028] wlan0: authenticated [104198.957032] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104198.964055] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=42) [104198.965045] wlan0: associated [104199.066054] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104480.016187] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104480.242075] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104480.405052] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104480.409054] wlan0: authenticated [104480.413051] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104480.419035] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [104480.420043] wlan0: associated [104480.436061] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104562.437035] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104562.664194] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104562.817053] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104562.824453] wlan0: authenticated [104562.826060] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104562.830052] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=41) [104562.831050] wlan0: associated [104562.894040] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104710.411037] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104710.646037] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104710.808045] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104710.812043] wlan0: authenticated [104710.814056] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104710.821047] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [104710.821251] wlan0: associated [104710.832260] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104736.369046] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104736.578037] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104736.732056] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104736.837156] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 2/3) [104736.840814] wlan0: authenticated [104736.841061] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104736.846046] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=43) [104736.847277] wlan0: associated [104736.867054] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104906.456051] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104906.670048] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104906.842049] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104906.851261] wlan0: authenticated [104906.851387] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104906.855031] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [104906.856269] wlan0: associated [104906.925101] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104922.188033] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104922.417046] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104922.579049] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104922.583041] wlan0: authenticated [104922.589034] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104922.595055] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=43) [104922.596090] wlan0: associated [104922.618031] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [104938.107041] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [104938.336058] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [104938.499056] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [104938.503038] wlan0: authenticated [104938.505029] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [104938.527046] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [104938.527245] wlan0: associated [104938.567063] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [105789.447064] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [105789.667050] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [105789.820052] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [105789.824088] wlan0: authenticated [105789.826137] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [105789.830045] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=42) [105789.830223] wlan0: associated [105789.843046] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [105860.299034] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [105860.528133] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [105860.702054] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [105860.705050] wlan0: authenticated [105860.707031] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [105860.715035] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [105860.715172] wlan0: associated [105860.784159] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [105877.078126] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [105877.305072] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [105877.467131] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [105877.470049] wlan0: authenticated [105877.473054] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [105877.477034] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=41) [105877.477235] wlan0: associated [105877.496051] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [105937.433047] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [105937.658040] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [105937.821052] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [105937.825049] wlan0: authenticated [105937.828031] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [105937.849034] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [105937.850233] wlan0: associated [105937.893052] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [107917.976038] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [107919.165034] PM: suspend entry (deep) [107919.216102] Filesystems sync: 0.051 seconds [107920.209581] Freezing user space processes [107920.212029] Freezing user space processes completed (elapsed 0.001 seconds) [107920.212114] OOM killer disabled. [107920.212276] Freezing remaining freezable tasks [107920.212858] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [107920.212960] printk: Suspending console(s) (use no_console_suspend to debug) [107920.213104] ACPI: EC: interrupt blocked [107920.213224] ACPI: PM: Preparing to enter system sleep state S3 [107920.213329] ACPI: EC: event blocked [107920.213422] ACPI: EC: EC stopped [107920.213509] ACPI: PM: Saving platform NVS memory [107920.213589] Disabling non-boot CPUs ... [107920.213684] smpboot: CPU 7 is now offline [107920.213788] smpboot: CPU 6 is now offline [107920.213893] smpboot: CPU 5 is now offline [107920.213985] smpboot: CPU 4 is now offline [107920.214122] smpboot: CPU 3 is now offline [107920.214214] smpboot: CPU 2 is now offline [107920.214297] smpboot: CPU 1 is now offline [107920.214386] ACPI: PM: Low-level resume complete [107920.214485] ACPI: EC: EC started [107920.214562] ACPI: PM: Restoring platform NVS memory [107920.214632] AMD-Vi: Virtual APIC enabled [107920.214703] AMD-Vi: Virtual APIC enabled [107920.214726] Enabling non-boot CPUs ... [107920.214754] smpboot: Booting Node 0 Processor 1 APIC 0x1 [107920.214778] CPU1 is up [107920.214826] smpboot: Booting Node 0 Processor 2 APIC 0x2 [107920.214868] CPU2 is up [107920.214910] smpboot: Booting Node 0 Processor 3 APIC 0x3 [107920.214947] CPU3 is up [107920.214984] smpboot: Booting Node 0 Processor 4 APIC 0x4 [107920.215051] CPU4 is up [107920.215093] smpboot: Booting Node 0 Processor 5 APIC 0x5 [107920.215129] CPU5 is up [107920.215169] smpboot: Booting Node 0 Processor 6 APIC 0x6 [107920.215205] CPU6 is up [107920.215250] smpboot: Booting Node 0 Processor 7 APIC 0x7 [107920.215279] CPU7 is up [107920.215320] ACPI: PM: Waking up from system sleep state S3 [107920.215365] ACPI: EC: interrupt unblocked [107920.215408] ACPI: EC: event unblocked [107920.215455] [drm] PCIE GART of 1024M enabled. [107920.215516] [drm] PTB located at 0x000000F43FC00000 [107920.215555] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [107920.216015] nvme nvme0: D3 entry latency set to 8 seconds [107920.216437] nvme nvme0: 8/0/0 default/read/poll queues [107920.216688] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [107920.216995] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [107920.217321] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [107920.217632] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [107920.218511] amdgpu: restore the fine grain parameters [107920.218570] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [107920.218956] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [107920.219387] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [107920.219747] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [107920.220160] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [107920.221381] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [107920.221800] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [107920.222373] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [107920.222791] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [107920.223166] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [107920.223474] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [107920.223777] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [107920.224089] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [107920.224407] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [107920.224717] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [107920.225019] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [107920.225316] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [107920.225710] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [107920.226064] OOM killer enabled. [107920.226104] Restarting tasks: Starting [107920.226154] usb 3-1: USB disconnect, device number 21 [107920.226248] Restarting tasks: Done [107920.226303] random: crng reseeded on system resumption [107920.226349] PM: suspend exit [107920.226392] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [107920.226437] Bluetooth: hci0: RTL: rom_version status=0 version=3 [107920.226483] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [107920.226529] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [107920.226574] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [107920.331541] usb 3-1: new full-speed USB device number 22 using xhci_hcd [107920.492377] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [107920.493535] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [107920.494528] usb 3-1: Product: Goodix Fingerprint Device [107920.495335] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [107920.691032] Bluetooth: hci0: RTL: fw version 0x2b66d962 [107920.837032] Bluetooth: hci0: AOSP extensions version v1.00 [107920.837122] Bluetooth: hci0: AOSP quality report is supported [107920.837212] Bluetooth: MGMT ver 1.23 [107924.814066] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [107924.876263] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [107924.879038] wlan0: authenticated [107924.879182] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [107924.885033] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [107924.886051] wlan0: associated [107924.895068] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [109013.558035] input: ... (AVRCP) as /devices/virtual/input/input48 [109653.546067] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [109654.720366] PM: suspend entry (deep) [109654.773056] Filesystems sync: 0.053 seconds [109655.874890] Freezing user space processes [109655.875920] Freezing user space processes completed (elapsed 0.002 seconds) [109655.883798] OOM killer disabled. [109655.885033] Freezing remaining freezable tasks [109655.887944] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [109655.888311] printk: Suspending console(s) (use no_console_suspend to debug) [109655.888876] ACPI: EC: interrupt blocked [109655.889022] ACPI: PM: Preparing to enter system sleep state S3 [109655.889128] ACPI: EC: event blocked [109655.890480] ACPI: EC: EC stopped [109655.890608] ACPI: PM: Saving platform NVS memory [109655.890719] Disabling non-boot CPUs ... [109655.890835] smpboot: CPU 7 is now offline [109655.890961] smpboot: CPU 6 is now offline [109655.908681] smpboot: CPU 5 is now offline [109655.909528] smpboot: CPU 4 is now offline [109655.909779] smpboot: CPU 3 is now offline [109655.909980] smpboot: CPU 2 is now offline [109655.916802] smpboot: CPU 1 is now offline [109655.917054] ACPI: PM: Low-level resume complete [109655.917182] ACPI: EC: EC started [109655.917289] ACPI: PM: Restoring platform NVS memory [109655.917408] AMD-Vi: Virtual APIC enabled [109655.917519] AMD-Vi: Virtual APIC enabled [109655.917612] Enabling non-boot CPUs ... [109655.917729] smpboot: Booting Node 0 Processor 1 APIC 0x1 [109655.917768] CPU1 is up [109655.917831] smpboot: Booting Node 0 Processor 2 APIC 0x2 [109655.917889] CPU2 is up [109655.917948] smpboot: Booting Node 0 Processor 3 APIC 0x3 [109655.918017] CPU3 is up [109655.918079] smpboot: Booting Node 0 Processor 4 APIC 0x4 [109655.918130] CPU4 is up [109655.918183] smpboot: Booting Node 0 Processor 5 APIC 0x5 [109655.918243] CPU5 is up [109655.918295] smpboot: Booting Node 0 Processor 6 APIC 0x6 [109655.918485] CPU6 is up [109655.918539] smpboot: Booting Node 0 Processor 7 APIC 0x7 [109655.918589] CPU7 is up [109655.918640] ACPI: PM: Waking up from system sleep state S3 [109655.918692] ACPI: EC: interrupt unblocked [109655.918754] ACPI: EC: event unblocked [109655.918819] [drm] PCIE GART of 1024M enabled. [109655.918872] [drm] PTB located at 0x000000F43FC00000 [109655.918922] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [109655.920310] nvme nvme0: D3 entry latency set to 8 seconds [109655.920903] nvme nvme0: 8/0/0 default/read/poll queues [109655.921458] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [109655.922095] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [109655.930625] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [109655.941666] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [109655.942375] amdgpu: restore the fine grain parameters [109655.942541] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [109655.943371] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [109655.943971] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [109655.977297] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [109655.977879] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [109655.978292] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [109655.978623] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [109655.978943] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [109655.979424] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [109655.979768] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [109655.980141] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [109655.980517] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [109655.980835] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [109655.981197] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [109655.981522] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [109655.981848] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [109655.982263] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [109655.982691] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [109655.983079] OOM killer enabled. [109655.983131] Restarting tasks: Starting [109655.983174] usb 3-1: USB disconnect, device number 22 [109655.983287] Restarting tasks: Done [109655.983325] random: crng reseeded on system resumption [109655.983366] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [109655.983432] PM: suspend exit [109655.983484] Bluetooth: hci0: RTL: rom_version status=0 version=3 [109655.983555] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [109655.983595] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [109655.983658] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [109656.006050] usb 3-1: new full-speed USB device number 23 using xhci_hcd [109656.167113] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [109656.167680] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [109656.168159] usb 3-1: Product: Goodix Fingerprint Device [109656.168589] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [109656.359070] Bluetooth: hci0: RTL: fw version 0x2b66d962 [109656.506124] Bluetooth: hci0: AOSP extensions version v1.00 [109656.506229] Bluetooth: hci0: AOSP quality report is supported [109656.506287] Bluetooth: MGMT ver 1.23 [109660.533052] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [109660.593065] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [109660.596042] wlan0: authenticated [109660.596103] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [109660.603190] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [109660.603286] wlan0: associated [109660.633032] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [109666.559088] input: ... (AVRCP) as /devices/virtual/input/input49 [110901.334169] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [110901.554044] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [110901.715202] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [110901.718041] wlan0: authenticated [110901.735061] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [110901.741039] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=43) [110901.741218] wlan0: associated [110901.826040] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [111996.502054] input: ... (AVRCP) as /devices/virtual/input/input50 [112561.806044] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [112562.017161] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [112562.182074] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [112562.186623] wlan0: authenticated [112562.189045] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [112562.196034] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [112562.196193] wlan0: associated [112562.228040] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [112655.055057] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [112655.282176] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [112655.433058] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [112655.444028] wlan0: authenticated [112655.444103] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [112655.450031] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=46) [112655.451035] wlan0: associated [112655.494038] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [112690.138092] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [112690.363058] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [112690.513062] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [112690.518056] wlan0: authenticated [112690.520033] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [112690.528037] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [112690.528159] wlan0: associated [112690.538135] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [116057.745044] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [116059.051864] PM: suspend entry (deep) [116059.090048] Filesystems sync: 0.039 seconds [116060.126646] Freezing user space processes [116060.127782] Freezing user space processes completed (elapsed 0.002 seconds) [116060.129186] OOM killer disabled. [116060.129304] Freezing remaining freezable tasks [116060.129373] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [116060.129439] printk: Suspending console(s) (use no_console_suspend to debug) [116060.129510] ACPI: EC: interrupt blocked [116060.129575] ACPI: PM: Preparing to enter system sleep state S3 [116060.129649] ACPI: EC: event blocked [116060.129708] ACPI: EC: EC stopped [116060.129815] ACPI: PM: Saving platform NVS memory [116060.129942] Disabling non-boot CPUs ... [116060.130030] smpboot: CPU 7 is now offline [116060.130125] smpboot: CPU 6 is now offline [116060.130238] smpboot: CPU 5 is now offline [116060.130305] smpboot: CPU 4 is now offline [116060.130375] smpboot: CPU 3 is now offline [116060.130458] smpboot: CPU 2 is now offline [116060.130673] smpboot: CPU 1 is now offline [116060.130759] ACPI: PM: Low-level resume complete [116060.130818] ACPI: EC: EC started [116060.130890] ACPI: PM: Restoring platform NVS memory [116060.130965] AMD-Vi: Virtual APIC enabled [116060.131077] AMD-Vi: Virtual APIC enabled [116060.131120] Enabling non-boot CPUs ... [116060.131158] smpboot: Booting Node 0 Processor 1 APIC 0x1 [116060.131194] CPU1 is up [116060.131273] smpboot: Booting Node 0 Processor 2 APIC 0x2 [116060.131383] CPU2 is up [116060.131466] smpboot: Booting Node 0 Processor 3 APIC 0x3 [116060.131537] CPU3 is up [116060.131609] smpboot: Booting Node 0 Processor 4 APIC 0x4 [116060.132193] CPU4 is up [116060.132272] smpboot: Booting Node 0 Processor 5 APIC 0x5 [116060.132330] CPU5 is up [116060.132390] smpboot: Booting Node 0 Processor 6 APIC 0x6 [116060.132451] CPU6 is up [116060.132513] smpboot: Booting Node 0 Processor 7 APIC 0x7 [116060.132586] CPU7 is up [116060.132643] ACPI: PM: Waking up from system sleep state S3 [116060.132696] ACPI: EC: interrupt unblocked [116060.132749] ACPI: EC: event unblocked [116060.132812] [drm] PCIE GART of 1024M enabled. [116060.132862] [drm] PTB located at 0x000000F43FC00000 [116060.132929] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [116060.136777] nvme nvme0: D3 entry latency set to 8 seconds [116060.137651] nvme nvme0: 8/0/0 default/read/poll queues [116060.138550] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [116060.139722] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [116060.142073] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [116060.145565] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [116060.146778] amdgpu: restore the fine grain parameters [116060.147232] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [116060.149565] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [116060.161405] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [116060.162852] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [116060.163705] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [116060.164496] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [116060.165395] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [116060.166159] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [116060.166828] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [116060.167510] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [116060.168255] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [116060.168971] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [116060.169702] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [116060.170457] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [116060.171121] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [116060.171724] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [116060.172368] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [116060.173385] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [116060.174336] OOM killer enabled. [116060.174420] Restarting tasks: Starting [116060.174477] usb 3-1: USB disconnect, device number 23 [116060.174677] Restarting tasks: Done [116060.174776] random: crng reseeded on system resumption [116060.174894] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [116060.174985] PM: suspend exit [116060.175087] Bluetooth: hci0: RTL: rom_version status=0 version=3 [116060.175161] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [116060.175215] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [116060.175307] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [116060.246044] usb 3-1: new full-speed USB device number 24 using xhci_hcd [116060.406155] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [116060.406950] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [116060.407612] usb 3-1: Product: Goodix Fingerprint Device [116060.408208] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [116060.614247] Bluetooth: hci0: RTL: fw version 0x2b66d962 [116060.761234] Bluetooth: hci0: AOSP extensions version v1.00 [116060.761398] Bluetooth: hci0: AOSP quality report is supported [116060.761608] Bluetooth: MGMT ver 1.23 [116064.766132] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [116064.832066] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [116064.836051] wlan0: authenticated [116064.836188] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [116064.850183] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=3) [116064.850427] wlan0: associated [116064.863078] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [116594.625073] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [116594.843039] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [116594.995063] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [116594.999060] wlan0: authenticated [116595.004039] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [116595.015237] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=54) [116595.015410] wlan0: associated [116595.031046] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [116689.396055] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [116689.628034] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [116689.782045] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [116689.785038] wlan0: authenticated [116689.786190] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [116689.820028] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=2) [116689.820140] wlan0: associated [116689.823045] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [117261.770066] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [117262.911559] PM: suspend entry (deep) [117262.947117] Filesystems sync: 0.035 seconds [117263.896484] Freezing user space processes [117263.897745] Freezing user space processes completed (elapsed 0.002 seconds) [117263.898972] OOM killer disabled. [117263.900118] Freezing remaining freezable tasks [117263.900404] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [117263.900689] printk: Suspending console(s) (use no_console_suspend to debug) [117263.900945] ACPI: EC: interrupt blocked [117263.901236] ACPI: PM: Preparing to enter system sleep state S3 [117263.901485] ACPI: EC: event blocked [117263.902035] ACPI: EC: EC stopped [117263.902326] ACPI: PM: Saving platform NVS memory [117263.902603] Disabling non-boot CPUs ... [117263.902870] smpboot: CPU 7 is now offline [117263.903206] smpboot: CPU 6 is now offline [117263.903538] smpboot: CPU 5 is now offline [117263.903834] smpboot: CPU 4 is now offline [117263.904108] smpboot: CPU 3 is now offline [117263.904361] smpboot: CPU 2 is now offline [117263.904655] smpboot: CPU 1 is now offline [117263.904934] ACPI: PM: Low-level resume complete [117263.905222] ACPI: EC: EC started [117263.905484] ACPI: PM: Restoring platform NVS memory [117263.905706] AMD-Vi: Virtual APIC enabled [117263.905937] AMD-Vi: Virtual APIC enabled [117263.906038] Enabling non-boot CPUs ... [117263.906194] smpboot: Booting Node 0 Processor 1 APIC 0x1 [117263.906308] CPU1 is up [117263.907423] smpboot: Booting Node 0 Processor 2 APIC 0x2 [117263.907532] CPU2 is up [117263.907629] smpboot: Booting Node 0 Processor 3 APIC 0x3 [117263.907777] CPU3 is up [117263.907941] smpboot: Booting Node 0 Processor 4 APIC 0x4 [117263.908244] CPU4 is up [117263.908353] smpboot: Booting Node 0 Processor 5 APIC 0x5 [117263.908471] CPU5 is up [117263.908582] smpboot: Booting Node 0 Processor 6 APIC 0x6 [117263.908695] CPU6 is up [117263.908819] smpboot: Booting Node 0 Processor 7 APIC 0x7 [117263.908923] CPU7 is up [117263.909040] ACPI: PM: Waking up from system sleep state S3 [117263.909153] ACPI: EC: interrupt unblocked [117263.909253] ACPI: EC: event unblocked [117263.909342] [drm] PCIE GART of 1024M enabled. [117263.909429] [drm] PTB located at 0x000000F43FC00000 [117263.909496] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [117263.910416] nvme nvme0: D3 entry latency set to 8 seconds [117263.911110] nvme nvme0: 8/0/0 default/read/poll queues [117263.911761] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [117263.912678] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [117263.913603] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [117263.914621] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [117263.916953] amdgpu: restore the fine grain parameters [117263.917601] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [117263.920367] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [117263.921715] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [117263.922929] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [117263.924539] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [117263.925913] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [117263.927106] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [117263.930612] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [117263.931911] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [117263.933285] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [117263.933996] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [117263.934748] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [117263.937236] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [117263.940239] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [117263.942914] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [117263.943904] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [117263.947639] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [117263.948462] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [117263.949054] OOM killer enabled. [117263.949139] Restarting tasks: Starting [117263.949204] usb 3-1: USB disconnect, device number 24 [117263.949372] Restarting tasks: Done [117263.949544] random: crng reseeded on system resumption [117263.949617] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [117263.949687] PM: suspend exit [117263.949740] Bluetooth: hci0: RTL: rom_version status=0 version=3 [117263.949798] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [117263.949869] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [117263.949931] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [117264.024893] usb 3-1: new full-speed USB device number 25 using xhci_hcd [117264.177545] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [117264.179593] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [117264.180167] usb 3-1: Product: Goodix Fingerprint Device [117264.180983] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [117264.391108] Bluetooth: hci0: RTL: fw version 0x2b66d962 [117264.536363] Bluetooth: hci0: AOSP extensions version v1.00 [117264.536528] Bluetooth: hci0: AOSP quality report is supported [117264.536616] Bluetooth: MGMT ver 1.23 [117268.612057] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [117268.764049] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [117268.767323] wlan0: authenticated [117268.769039] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [117268.774239] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=58) [117268.774451] wlan0: associated [117268.804076] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [117307.120088] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [117307.350080] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [117307.511068] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [117307.514053] wlan0: authenticated [117307.520031] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [117307.535067] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [117307.535314] wlan0: associated [117307.578077] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [117367.809042] input: ... (AVRCP) as /devices/virtual/input/input51 [117897.308422] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.311335] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117897.408034] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.408517] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117897.485040] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.485551] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117897.562105] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.562535] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117897.629044] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.629622] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117897.715052] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.716047] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117897.775069] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.776139] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117897.869790] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.870425] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117897.931584] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117897.932115] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117898.022058] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117898.023105] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117898.095142] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117898.096279] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117898.182087] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117898.183179] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117898.255031] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117898.255437] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117898.340042] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117898.340585] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117898.413040] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117898.413780] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117898.498041] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117898.498760] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.154053] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.154898] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.225046] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.225899] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.301750] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.302936] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.387069] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.387983] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.452052] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.452719] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.531050] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.531720] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.609046] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.609761] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.697046] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.697684] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.754062] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.754866] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.851074] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.851869] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117899.903066] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117899.903971] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117900.002154] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117900.003064] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117941.593032] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117941.593644] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117941.795055] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117941.796289] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117946.646046] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117946.646581] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117946.690898] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117946.691429] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117946.915461] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117946.916411] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117946.974189] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117946.975091] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117947.265056] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117947.266154] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117947.376934] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117947.377865] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117947.673826] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117947.674760] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117947.872091] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117947.873096] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117948.058131] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117948.058966] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117948.245125] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117948.246036] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117948.418040] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117948.419132] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117948.506800] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117948.507731] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117948.790076] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117948.790962] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [117948.909058] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [117948.909877] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [118020.289035] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [118020.515047] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [118020.667031] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [118020.672274] wlan0: authenticated [118020.672472] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [118020.677039] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=58) [118020.677196] wlan0: associated [118020.735044] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [118217.115052] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [118217.335231] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [118217.487067] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [118217.491078] wlan0: authenticated [118217.491179] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [118217.497041] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [118217.497236] wlan0: associated [118217.521053] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [118472.218041] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [118472.432070] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [118472.585050] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [118472.589031] wlan0: authenticated [118472.591645] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [118472.614031] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=57) [118472.615065] wlan0: associated [118472.630046] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [118801.211032] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [118801.430058] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [118801.582067] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [118801.586302] wlan0: authenticated [118801.586497] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [118801.592063] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [118801.592297] wlan0: associated [118801.617782] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [118874.287064] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [118874.504186] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [118874.657044] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [118874.661375] wlan0: authenticated [118874.661644] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [118874.667043] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=58) [118874.667235] wlan0: associated [118874.758132] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [119109.682065] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [119110.960030] PM: suspend entry (deep) [119111.035044] Filesystems sync: 0.075 seconds [119114.022880] Freezing user space processes [119114.023703] Freezing user space processes completed (elapsed 0.002 seconds) [119114.023774] OOM killer disabled. [119114.023841] Freezing remaining freezable tasks [119114.023892] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [119114.023964] printk: Suspending console(s) (use no_console_suspend to debug) [119114.024094] ACPI: EC: interrupt blocked [119114.024159] ACPI: PM: Preparing to enter system sleep state S3 [119114.024244] ACPI: EC: event blocked [119114.024312] ACPI: EC: EC stopped [119114.024427] ACPI: PM: Saving platform NVS memory [119114.024503] Disabling non-boot CPUs ... [119114.024570] smpboot: CPU 7 is now offline [119114.025915] smpboot: CPU 6 is now offline [119114.027856] smpboot: CPU 5 is now offline [119114.028165] smpboot: CPU 4 is now offline [119114.028397] smpboot: CPU 3 is now offline [119114.028608] smpboot: CPU 2 is now offline [119114.028734] smpboot: CPU 1 is now offline [119114.028855] ACPI: PM: Low-level resume complete [119114.028970] ACPI: EC: EC started [119114.029107] ACPI: PM: Restoring platform NVS memory [119114.029565] AMD-Vi: Virtual APIC enabled [119114.029676] AMD-Vi: Virtual APIC enabled [119114.029776] Enabling non-boot CPUs ... [119114.029874] smpboot: Booting Node 0 Processor 1 APIC 0x1 [119114.029979] CPU1 is up [119114.030132] smpboot: Booting Node 0 Processor 2 APIC 0x2 [119114.030230] CPU2 is up [119114.030356] smpboot: Booting Node 0 Processor 3 APIC 0x3 [119114.030477] CPU3 is up [119114.030589] smpboot: Booting Node 0 Processor 4 APIC 0x4 [119114.032395] CPU4 is up [119114.032558] smpboot: Booting Node 0 Processor 5 APIC 0x5 [119114.032696] CPU5 is up [119114.032847] smpboot: Booting Node 0 Processor 6 APIC 0x6 [119114.032917] CPU6 is up [119114.032991] smpboot: Booting Node 0 Processor 7 APIC 0x7 [119114.033101] CPU7 is up [119114.033156] ACPI: PM: Waking up from system sleep state S3 [119114.033203] ACPI: EC: interrupt unblocked [119114.033260] ACPI: EC: event unblocked [119114.033321] [drm] PCIE GART of 1024M enabled. [119114.033381] [drm] PTB located at 0x000000F43FC00000 [119114.033443] amdgpu 0000:03:00.0: amdgpu: PSP is resuming... [119114.034490] nvme nvme0: D3 entry latency set to 8 seconds [119114.035065] nvme nvme0: 8/0/0 default/read/poll queues [119114.035424] amdgpu 0000:03:00.0: amdgpu: reserve 0x400000 from 0xf43f800000 for PSP TMR [119114.035914] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not available [119114.036914] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available [119114.037473] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [119114.037949] usb 3-2: reset full-speed USB device number 3 using xhci_hcd [119114.038421] amdgpu 0000:03:00.0: amdgpu: psp gfx command LOAD_TA(0x1) failed and response status is (0xB) [119114.038857] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: Failed to initialize SECUREDISPLAY [119114.039306] amdgpu: restore the fine grain parameters [119114.039367] amdgpu 0000:03:00.0: amdgpu: kiq ring mec 2 pipe 1 q 0 [119114.039800] amdgpu 0000:03:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [119114.040241] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [119114.040653] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [119114.041087] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [119114.041549] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [119114.042074] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [119114.042512] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [119114.042926] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [119114.043375] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [119114.043808] amdgpu 0000:03:00.0: amdgpu: ring kiq_XXX.XXX.XXX.XXX uses VM inv eng 11 on hub 0 [119114.044262] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 8 [119114.044692] amdgpu 0000:03:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 8 [119114.045186] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 8 [119114.045684] amdgpu 0000:03:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 8 [119114.047105] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 8 [119114.048718] OOM killer enabled. [119114.048869] Restarting tasks: Starting [119114.048994] usb 3-1: USB disconnect, device number 25 [119114.051614] Restarting tasks: Done [119114.052342] random: crng reseeded on system resumption [119114.052634] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [119114.052714] PM: suspend exit [119114.057797] Bluetooth: hci0: RTL: rom_version status=0 version=3 [119114.058394] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [119114.058530] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [119114.058631] Bluetooth: hci0: RTL: cfg_sz 6, total sz 37274 [119114.140072] usb 3-1: new full-speed USB device number 26 using xhci_hcd [119114.298048] usb 3-1: New USB device found, idVendor=27c6, idProduct=5110, bcdDevice= 2.00 [119114.298303] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [119114.298902] usb 3-1: Product: Goodix Fingerprint Device [119114.299411] usb 3-1: Manufacturer: Shenzhen Goodix Technology Co.,Ltd. [119114.508034] Bluetooth: hci0: RTL: fw version 0x2b66d962 [119114.654072] Bluetooth: hci0: AOSP extensions version v1.00 [119114.654293] Bluetooth: hci0: AOSP quality report is supported [119114.655035] Bluetooth: MGMT ver 1.23 [119117.309290] amdgpu 0000:03:00.0: amdgpu: psp gfx command INVOKE_CMD(0x3) failed and response status is (0x0) [119118.716139] [drm] Failed to enable ASSR [119118.716278] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [119118.777060] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [119118.780060] wlan0: authenticated [119118.780212] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [119118.787060] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=58) [119118.787292] wlan0: associated [119118.807078] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [119119.836073] amdgpu 0000:03:00.0: amdgpu: psp gfx command INVOKE_CMD(0x3) failed and response status is (0x0) [119126.207703] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119126.208709] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119126.311259] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119126.311925] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119133.610052] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119133.611083] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119133.731094] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119133.732179] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119133.804138] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119133.805425] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119133.921061] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119133.921972] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119133.996067] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119133.997072] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119134.104048] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119134.104680] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119134.169064] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119134.169791] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119134.291059] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119134.291861] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119134.369048] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119134.369735] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119134.515179] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119134.515807] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119134.595057] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119134.596151] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119134.751064] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [119134.752082] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [119273.179046] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [119273.399049] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [119273.551054] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [119273.558034] wlan0: authenticated [119273.558133] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [119273.564050] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [119273.564254] wlan0: associated [119273.605048] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [119793.511053] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [119793.717157] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [119793.870057] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [119793.874055] wlan0: authenticated [119793.881025] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [119793.887045] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=59) [119793.888032] wlan0: associated [119793.938039] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [119906.355052] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [119906.579037] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [119906.730040] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [119906.733049] wlan0: authenticated [119906.740864] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [119906.743034] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [119906.744053] wlan0: associated [119906.756344] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [121298.548090] input: ... (AVRCP) as /devices/virtual/input/input52 [121555.754034] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121555.763435] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121555.835022] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121555.835675] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121555.892031] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121555.892522] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121555.960061] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121555.960942] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.033152] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.033987] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.111040] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.111687] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.183092] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.183637] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.269034] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.270116] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.344044] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.344827] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.424046] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.424504] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.479064] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.479699] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.572052] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.572574] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.635147] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.635929] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.720041] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.720447] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.790036] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.790747] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.883041] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.883537] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121556.944030] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121556.944598] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [121557.050044] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). [121557.050572] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. [123612.213073] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [123612.419051] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [123612.577089] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [123612.581168] wlan0: authenticated [123612.581297] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [123612.587048] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=58) [123612.587246] wlan0: associated [123612.640043] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [123660.312037] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [123660.543163] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [123660.696040] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [123660.699034] wlan0: authenticated [123660.702055] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [123660.709056] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [123660.709280] wlan0: associated [123660.766068] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [125020.801043] wlan0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [125021.042129] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [125021.102050] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [125021.105030] wlan0: authenticated [125021.105122] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [125021.111027] wlan0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [125021.112041] wlan0: associated [125021.258060] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [125257.423080] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [125257.641047] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [125257.793058] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [125257.797266] wlan0: authenticated [125257.797563] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [125257.803051] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=58) [125257.803274] wlan0: associated [125257.896095] wlan0: Limiting TX power to 28 (28 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [125293.231564] wlan0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [125293.451140] wlan0: authenticate with XX:XX:XX:XX:XX:XX (local address=XX:XX:XX:XX:XX:XX) [125293.613087] wlan0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [125293.617051] wlan0: authenticated [125293.619040] wlan0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [125293.626808] wlan0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x111 status=0 aid=1) [125293.626980] wlan0: associated [125293.643070] wlan0: Limiting TX power to 23 (23 - 0) dBm as advertised by XX:XX:XX:XX:XX:XX [126695.681286] wlan0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [126696.835040] PM: suspend entry (deep)