[ 3.544184] SCSI subsystem initialized [ 3.552504] device-mapper: uevent: version 1.0.3 [ 3.552565] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 4.015011] xor: automatically using best checksumming function avx [ 4.049645] raid6: avx2x4 gen() 13328 MB/s [ 4.076645] raid6: avx2x2 gen() 15225 MB/s [ 4.096651] raid6: avx2x1 gen() 14036 MB/s [ 4.096653] raid6: using algorithm avx2x2 gen() 15225 MB/s [ 4.118645] raid6: .... xor() 8587 MB/s, rmw enabled [ 4.118647] raid6: using avx2x2 recovery algorithm [ 4.175659] tsc: Refined TSC clocksource calibration: 2399.999 MHz [ 4.175668] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns [ 4.175691] clocksource: Switched to clocksource tsc [ 4.196657] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 4.225945] ACPI: bus type USB registered [ 4.225974] usbcore: registered new interface driver usbfs [ 4.225983] usbcore: registered new interface driver hub [ 4.225994] usbcore: registered new device driver usb [ 4.763544] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 [ 4.768215] ACPI: button: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6 [ 4.771148] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 4.780312] ACPI: button: Power Button [PWRF] ACPI: battery: Slot [BAT0] (battery present) [ 4.842856] Linux agpgart interface v0.103 [ 4.854611] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.854620] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.855700] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 4.856042] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.856047] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.856050] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 4.856100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 4.856104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.856106] usb usb1: Product: xHCI Host Controller [ 4.856108] usb usb1: Manufacturer: Linux 6.2.6-desktop-1omv2390 xhci-hcd [ 4.856110] usb usb1: SerialNumber: ... [ 4.856255] hub 1-0:1.0: USB hub found [ 4.856272] hub 1-0:1.0: 12 ports detected [ 4.856961] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 4.856965] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.856968] usb usb2: Product: xHCI Host Controller [ 4.856970] usb usb2: Manufacturer: Linux 6.2.6-desktop-1omv2390 xhci-hcd [ 4.856971] usb usb2: SerialNumber: ... [ 4.857070] hub 2-0:1.0: USB hub found [ 4.857082] hub 2-0:1.0: 6 ports detected [ 4.857235] usb: port power management may be unreliable [ 4.873325] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002) [ 4.874801] libata version 3.00 loaded. [ 4.894650] cryptd: max_cpu_qlen set to 1000 [ 4.919954] AVX2 version of gcm_enc/dec engaged. [ 4.919985] AES CTR mode by8 optimization enabled [ 4.923898] ahci 0000:00:17.0: version 3.0 [ 4.924149] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 4.975855] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode [ 4.975863] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 4.989205] scsi host0: ahci [ 4.996700] scsi host1: ahci [ 5.001836] scsi host2: ahci [ 5.001909] ata1: SATA max UDMA/133 abar m2048@0xf132c000 port 0xf132c100 irq 126 [ 5.001913] ata2: SATA max UDMA/133 abar m2048@0xf132c000 port 0xf132c180 irq 126 [ 5.001915] ata3: SATA max UDMA/133 abar m2048@0xf132c000 port 0xf132c200 irq 126 [ 5.003369] ACPI: bus type drm_connector registered [ 5.097650] usb 1-1: new low-speed USB device number 2 using xhci_hcd [ 5.228765] usb 1-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00 [ 5.228769] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.228772] usb 1-1: Product: USB Keyboard [ 5.228774] usb 1-1: Manufacturer: Logitech [ 5.245868] hid: raw HID events driver (C) Jiri Kosina [ 5.308712] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.309407] ata1.00: ACPI cmd f5/E34E2A2BA64BE2132EE0E0037378BC8A(unknown) filtered out [ 5.309414] ata1.00: ATA-11: SanDisk SDSSDH3 512G, 40101000, max UDMA/133 [ 5.309911] ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 5.311421] ata1.00: Features: Dev-Sleep [ 5.312314] ata1.00: ACPI cmd f5/E34E2A2BA64BE2132EE0E0037378BC8A(unknown) filtered out [ 5.314613] ata1.00: configured for UDMA/133 [ 5.314709] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDH3 1000 PQ: 0 ANSI: 5 [ 5.351649] usb 1-2: new low-speed USB device number 3 using xhci_hcd [ 5.482007] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10 [ 5.482011] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 5.482014] usb 1-2: Product: Usb Mouse [ 5.482016] usb 1-2: Manufacturer: SIGMACHIP [ 5.496672] usbcore: registered new interface driver usbhid [ 5.496676] usbhid: USB HID core driver [ 5.601648] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 5.626494] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.629853] ata2.00: ATAPI: hp DVDRW DU8A6SH, DH61, max UDMA/133 [ 5.631012] ata2.00: configured for UDMA/133 [ 5.638783] scsi 1:0:0:0: CD-ROM hp DVDRW DU8A6SH DH61 PQ: 0 ANSI: 5 [ 5.757902] usb 1-6: New USB device found, idVendor=04f2, idProduct=b51d, bcdDevice=99.06 [ 5.757907] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 5.757910] usb 1-6: Product: HP HD Camera [ 5.757912] usb 1-6: Manufacturer: Generic [ 5.757914] usb 1-6: SerialNumber: ... [ 5.876648] usb 1-7: new full-speed USB device number 5 using xhci_hcd [ 5.956709] ata3: SATA link down (SStatus 4 SControl 300) [ 5.962717] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C31C.0001/input/input8 [ 5.995113] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 5.995123] sd 0:0:0:0: [sda] Write Protect is off [ 5.995126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.995137] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.995152] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 6.003656] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01 [ 6.003662] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 6.007954] sda: sda1 sda2 [ 6.008222] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.008857] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.008860] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.014848] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0 [ 6.015111] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input9 [ 6.025590] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.066738] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C31C.0002/input/input10 [ 6.066881] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1 [ 6.066993] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1C4F:0034.0003/input/input11 [ 6.067110] hid-generic 0003:1C4F:0034.0003: input,hidraw2: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-2/input0 [ 6.167512] EXT4-fs (sda2): orphan cleanup on readonly fs [ 6.168008] EXT4-fs (sda2): mounted filesystem HASH_40F-282A-A886-054E-EBA99C1EAC3E with ordered data mode. Quota mode: none. [ 6.271021] i915 0000:00:02.0: vgaarb: deactivate vga console [ 6.282689] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.286778] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 6.310518] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 6.310524] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 7.406030] i915 0000:00:02.0: [drm] Skipping intel_backlight registration [ 7.406220] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 7.408709] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.408937] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 7.416455] fbcon: i915drmfb (fb0) is primary device [ 7.422219] Console: switching to colour frame buffer device 170x48 [ 7.440171] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 7.995112] zram0: detected capacity change from 0 to 16274432 [ 8.086159] ACPI: AC: AC Adapter [AC] (on-line) [ 8.091489] Adding 8137212k swap on /dev/zram0. Priority:100 extents:1 across:8137212k SSDscFS [ 8.106162] input: Wireless hotkeys as /devices/virtual/input/input13 [ 8.114374] hp_accel: laptop model unknown, using default axes configuration [ 8.118320] tpm_tis 00:09: 1.2 TPM (device-id 0x1B, rev-id 16) [ 8.132695] tpm tpm0: TPM is disabled/deactivated (0x7) [ 8.132702] tpm tpm0: tpm_read_log_acpi: TCPA log area empty [ 8.171092] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 8.204588] mc: Linux media interface: v0.10 [ 8.228119] lis3lv02d: 8 bits 3DC sensor found [ 8.245670] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 8.245844] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 8.245881] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 8.245925] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 [ 8.245983] pci 0000:00:1f.1: reg 0x10: [mem 0xfd000000-0xfdffffff 64bit] i2c i2c-5: 2/2 memory slots populated (from DMI) [ 8.247573] i2c i2c-5: Successfully instantiated SPD at 0x50 [ 8.270697] Bluetooth: Core ver 2.22 [ 8.270898] NET: Registered PF_BLUETOOTH protocol family [ 8.270900] Bluetooth: HCI device and connection manager initialized [ 8.270905] Bluetooth: HCI socket layer initialized [ 8.270908] Bluetooth: L2CAP socket layer initialized [ 8.270909] Bluetooth: SCO socket layer initialized [ 8.273473] videodev: Linux video capture interface: v2.00 [ 8.286232] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.290579] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.305656] usbcore: registered new interface driver btusb [ 8.317777] usb 1-6: Found UVC 1.00 device HP HD Camera (04f2:b51d) [ 8.318146] hp_wmi: query 0x4 returned error 0x5 [ 8.321008] input: HP WMI hotkeys as /devices/virtual/input/input14 [ 8.328573] Intel(R) Wireless WiFi driver for Linux [ 8.336150] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 8.339195] input: HP HD Camera: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input15 [ 8.339385] usbcore: registered new interface driver uvcvideo [ 8.342319] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 8.348407] Bluetooth: hci0: Device revision is 5 [ 8.348412] Bluetooth: hci0: Secure boot is enabled [ 8.348413] Bluetooth: hci0: OTP lock is enabled [ 8.348415] Bluetooth: hci0: API lock is enabled [ 8.348416] Bluetooth: hci0: Debug lock is disabled [ 8.348417] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 8.379709] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input16 [ 8.381841] thermal LNXTHERM:00: registered as thermal_zone1 [ 8.381845] ACPI: thermal: Thermal Zone [CPUZ] (53 C) [ 8.383242] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 8.397962] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 8.405595] thermal LNXTHERM:01: registered as thermal_zone2 [ 8.405600] ACPI: thermal: Thermal Zone [GFXZ] (0 C) [ 8.408766] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 046444B5D9144F4FF789F33DF07645DA, XID 541, IRQ 129 [ 8.408772] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 8.413597] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 8.448026] thermal LNXTHERM:02: registered as thermal_zone3 [ 8.448030] ACPI: thermal: Thermal Zone [EXTZ] (39 C) [ 8.458080] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8000C-36.ucode op_mode iwlmvm [ 8.458335] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 8.465796] thermal LNXTHERM:03: registered as thermal_zone4 [ 8.465801] ACPI: thermal: Thermal Zone [LOCZ] (41 C) [ 8.466805] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 8.466809] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 8.466810] RAPL PMU: hw unit of domain package 2^-14 Joules [ 8.466812] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 8.466813] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 8.466814] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 8.483797] intel_tcc_cooling: Programmable TCC Offset detected [ 8.487436] thermal LNXTHERM:04: registered as thermal_zone6 [ 8.487441] ACPI: thermal: Thermal Zone [BATZ] (28 C) [ 8.488096] thermal LNXTHERM:05: registered as thermal_zone7 [ 8.488099] ACPI: thermal: Thermal Zone [PCHZ] (127 C) [ 8.496534] snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing. [ 8.497095] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 8.497102] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.497107] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 8.497111] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 8.497113] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 8.497115] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 8.497117] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 8.527185] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 8.527247] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 8.527305] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 8.527369] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 8.527420] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 8.527471] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 8.543674] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x201 [ 8.543761] thermal thermal_zone8: failed to read out thermal zone (-61) [ 8.587560] ee1004 5-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 8.588361] iTCO_vendor_support: vendor-support=0 [ 8.603927] iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 8.618977] iwlwifi 0000:02:00.0: base HW address: 96B226F66DC4CC831CD0BD6AF83DF3F4, OTP minor version: 0x0 [ 8.629737] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { P513 } 21 jiffies s: 273 root: 0x0/T [ 8.629746] rcu: blocking rcu_node structures (internal RCU debug): [ 8.692830] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 8.744870] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 8.780886] intel_rapl_common: Found RAPL domain package [ 8.780890] intel_rapl_common: Found RAPL domain core [ 8.780891] intel_rapl_common: Found RAPL domain uncore [ 8.780892] intel_rapl_common: Found RAPL domain dram [ 8.780893] intel_rapl_common: Found RAPL domain psys [ 8.886316] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 9.154217] psmouse serio3: synaptics: queried max coordinates: x [..5716], y [..4886] psmouse serio3: synaptics: queried min coordinates: x [1220..], y [986..] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400/0x0, board id: 2654, fw id: 1323623 [ 9.250667] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) [ 9.278728] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input19 [ 9.419683] r8169 0000:01:00.0 enp1s0: Link is Down [ 9.751760] Bluetooth: hci0: Waiting for firmware download to complete [ 9.752304] Bluetooth: hci0: Firmware loaded in 1322594 usecs [ 9.752335] Bluetooth: hci0: Waiting for device to boot [ 9.763313] Bluetooth: hci0: Device booted in 10732 usecs [ 9.763318] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 9.766573] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 9.770320] Bluetooth: hci0: Applying Intel DDC parameters completed [ 9.771316] Bluetooth: hci0: Firmware revision 0.0 build 14 week 44 2021 [ 9.987226] NET: Registered PF_PACKET protocol family [ 12.644814] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.644828] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 420.539095] Non-volatile memory driver v1.3 [ 420.927675] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 421.061202] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 421.061289] sr 1:0:0:0: Attached scsi generic sg1 type 5 [29571.151825] mmap: Media (2834): VmData 8590036992 exceed data ulimit 8589934592. Update limits or use boot option ignore_rlimit_data. [29571.324266] traps: Media[2834] trap invalid opcode ip:56087087e186 sp:7fc8294e7040 error:0 in vivaldi-bin[560868b3e000+c6b7000] r8169 0000:01:00.0 enp1s0: Link is Down [48759.917831] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx [48770.681406] r8169 0000:01:00.0 enp1s0: Link is Down [48773.837219] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx [48784.642204] r8169 0000:01:00.0 enp1s0: Link is Down [48792.812915] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx [48793.616013] r8169 0000:01:00.0 enp1s0: Link is Down [48818.137340] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx [56670.773184] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [56670.773196] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [56670.773197] pcieport 0000:00:1c.0: device [8086:9d14] error status/mask=00000001/00002000 [56670.773200] pcieport 0000:00:1c.0: [ 0] RxErr (First) [215537.729653] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [215537.729686] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [215537.729696] pcieport 0000:00:1c.0: device [8086:9d14] error status/mask=00000001/00002000 [215537.729708] pcieport 0000:00:1c.0: [ 0] RxErr (First) [215537.851239] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:00:1c.0 [215537.851273] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) [215537.851283] pcieport 0000:00:1c.0: device [8086:9d14] error status/mask=00000001/00002000 [215537.851295] pcieport 0000:00:1c.0: [ 0] RxErr (First) [297419.362732] zram0: detected capacity change from 16274432 to 0