-- Logs begin at Fri 2022-07-08 14:37:00 CEST, end at Thu 2023-09-28 07:04:00 CEST. -- [ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28 [ 0.000000] Linux version 4.18.16-desktop-1bP (XXX@XXX) (gcc version 8.2.1 20180824 (blackPanther 8.2.1-0.20180824.1bP)) #1 SMP Tue Oct 23 22:47:49 CEST 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.16-desktop-1bP root=UUID=HASH_68C-182A-402C-4045-0AC43D0A1D3A ro quiet splash resume=UUID=HASH_323-D770-E1FF-0796-CC1D622E8A14 loglevel=0 vga=791 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007b96bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007b96c000-0x000000007b9befff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007b9bf000-0x000000007ba81fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ba82000-0x000000007babefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007babf000-0x000000007baebfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007baec000-0x000000007bafefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007baff000-0x000000007bafffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bb00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: eMachines eMachines E725 /eMachines E725 , BIOS V1.06 07/11/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x7bb00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF00000 mask FFFF00000 write-protect [ 0.000000] 1 base 0FFFC0000 mask FFFFE0000 uncachable [ 0.000000] 2 base 000000000 mask FC0000000 write-back [ 0.000000] 3 base 040000000 mask FC0000000 write-back [ 0.000000] 4 base 07C000000 mask FFC000000 uncachable [ 0.000000] 5 base 07BC00000 mask FFFC00000 uncachable [ 0.000000] 6 base 07BB00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576 [ 0.000000] BRK [0x118e2000, 0x118e2fff] PGTABLE [ 0.000000] BRK [0x118e3000, 0x118e3fff] PGTABLE [ 0.000000] BRK [0x118e4000, 0x118e4fff] PGTABLE [ 0.000000] BRK [0x118e5000, 0x118e5fff] PGTABLE [ 0.000000] BRK [0x118e6000, 0x118e6fff] PGTABLE [ 0.000000] BRK [0x118e7000, 0x118e7fff] PGTABLE [ 0.000000] BRK [0x118e8000, 0x118e8fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36638000-0x37313fff] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x000000007BAFE120 000064 (v01 ACRSYS ACRPRDCT 00000001 01000013) [ 0.000000] ACPI: FACP 0x000000007BAFD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: DSDT 0x000000007BAEE000 00937D (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: FACS 0x000000007BA8F000 000040 [ 0.000000] ACPI: FACS 0x000000007BA8F000 000040 [ 0.000000] ACPI: HPET 0x000000007BAFC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: APIC 0x000000007BAFB000 00006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: MCFG 0x000000007BAFA000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: ASF! 0x000000007BAF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: NSLI 0x000000007BAF8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: BOOT 0x000000007BAED000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013) [ 0.000000] ACPI: SSDT 0x000000007BAEC000 000655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bafffff] NODE_DATA(0) allocated [mem 0x7bae8000-0x7baebfff] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x000000007bafffff] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x000000007b96bfff] node 0: [mem 0x000000007b9bf000-0x000000007ba81fff] node 0: [mem 0x000000007babf000-0x000000007baebfff] node 0: [mem 0x000000007baff000-0x000000007bafffff] Reserved but unavailable: 17926 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bafffff] On node 0 totalpages: 506362 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7852 pages used for memmap [ 0.000000] DMA32 zone: 502365 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: Registered nosave memory: [mem 0x7b96c000-0x7b9befff] PM: Registered nosave memory: [mem 0x7ba82000-0x7babefff] PM: Registered nosave memory: [mem 0x7baec000-0x7bafefff] [mem 0x80000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x93/0x51a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu @(____ptrval____) s145816 r8192 d30312 u524288 [ 0.000000] pcpu-alloc: s145816 r8192 d30312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 498425 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.16-desktop-1bP root=UUID=HASH_68C-182A-402C-4045-0AC43D0A1D3A ro quiet splash resume=UUID=HASH_323-D770-E1FF-0796-CC1D622E8A14 loglevel=0 vga=791 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1953112K/2025448K available (12300K kernel code, 1346K rwdata, 3672K rodata, 1568K init, 656K bss, 72336K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 34488 entries in 135 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.005000] tsc: Fast TSC calibration using PIT [ 0.006000] tsc: Detected 2094.838 MHz processor [ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e32241662d, max_idle_ns: 440795209926 ns [ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.67 BogoMIPS (lpj=2094838) [ 0.006000] pid_max: default: 32768 minimum: 301 [ 0.006000] Security Framework initialized [ 0.006000] TOMOYO Linux initialized [ 0.007402] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008017] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.008060] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.008080] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.008390] mce: CPU supports 6 MCE banks [ 0.008398] CPU0: Thermal monitoring enabled (TM1) [ 0.008401] process: using mwait in idle threads [ 0.008406] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.008407] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.008410] Spectre V2 : Mitigation: Full generic retpoline [ 0.008411] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.008412] Speculative Store Bypass: Vulnerable [ 0.008577] Freeing SMP alternatives memory: 32K [ 0.011000] smpboot: CPU0: Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.011000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.011000] ... version: 2 [ 0.011000] ... bit width: 40 [ 0.011000] ... generic registers: 2 [ 0.011000] ... value mask: 000000ffffffffff [ 0.011000] ... max period: 000000007fffffff [ 0.011000] ... fixed-purpose events: 3 [ 0.011000] ... event mask: 0000000700000003 [ 0.011000] Hierarchical SRCU implementation. [ 0.011136] smp: Bringing up secondary CPUs ... [ 0.011305] x86: Booting SMP configuration: [ 0.011307] .... node #0, CPUs: #1 [ 0.013044] smp: Brought up 1 node, 2 CPUs [ 0.013044] smpboot: Max logical packages: 2 [ 0.013044] smpboot: Total of 2 processors activated (8379.35 BogoMIPS) [ 0.014226] devtmpfs: initialized [ 0.014226] x86/mm: Memory block size: 128MB [ 0.015006] PM: Registering ACPI NVS region [mem 0x7ba82000-0x7babefff] (249856 bytes) [ 0.015024] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.015024] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.015102] xor: measuring software checksum speed [ 0.025002] prefetch64-sse: 11936.000 MB/sec [ 0.035001] generic_sse: 10116.000 MB/sec [ 0.035003] xor: using function: prefetch64-sse (11936.000 MB/sec) [ 0.035006] pinctrl core: initialized pinctrl subsystem [ 0.035146] RTC time: 6:11:37, date: 09/17/23 [ 0.035332] NET: Registered protocol family 16 [ 0.035487] cpuidle: using governor ladder [ 0.035487] cpuidle: using governor menu [ 0.035487] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.035487] Simple Boot Flag at 0x44 set to 0x1 [ 0.035487] ACPI: bus type PCI registered [ 0.035487] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.036020] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.036034] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.036034] PCI: Using configuration type 1 for base access [ 0.036134] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.036135] mtrr: probably your BIOS does not setup all CPUs. [ 0.036136] mtrr: corrected configuration. [ 0.037474] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.054017] raid6: sse2x1 gen() 3167 MB/s [ 0.071008] raid6: sse2x1 xor() 3603 MB/s [ 0.088007] raid6: sse2x2 gen() 3628 MB/s [ 0.105002] raid6: sse2x2 xor() 4466 MB/s [ 0.122003] raid6: sse2x4 gen() 6507 MB/s [ 0.139006] raid6: sse2x4 xor() 4257 MB/s [ 0.139008] raid6: using algorithm sse2x4 gen() 6507 MB/s [ 0.139009] raid6: .... xor() 4257 MB/s, rmw enabled [ 0.139010] raid6: using ssse3x2 recovery algorithm [ 0.139124] ACPI: Added _OSI(Module Device) [ 0.139126] ACPI: Added _OSI(Processor Device) [ 0.139127] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.139128] ACPI: Added _OSI(Processor Aggregator Device) [ 0.139129] ACPI: Added _OSI(Linux-Dell-Video) [ 0.145210] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.148183] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.148552] ACPI: Dynamic OEM Table Load: [ 0.148560] ACPI: SSDT 0xFFFF8B69F8A00400 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.148900] ACPI: Dynamic OEM Table Load: [ 0.148906] ACPI: SSDT 0xFFFF8B69F8A2F000 000537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.149469] ACPI: Dynamic OEM Table Load: [ 0.149475] ACPI: SSDT 0xFFFF8B69F8A25E00 0001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.149740] ACPI: Dynamic OEM Table Load: [ 0.149745] ACPI: SSDT 0xFFFF8B69F89C5840 00008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.150226] ACPI: EC: EC started [ 0.150227] ACPI: EC: interrupt blocked [ 0.155073] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as first EC [ 0.155076] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.155078] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions [ 0.155079] ACPI: Interpreter enabled [ 0.155110] ACPI: (supports S0 S3 S4 S5) [ 0.155111] ACPI: Using IOAPIC for interrupt routing [ 0.155151] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.155403] ACPI: Enabled 15 GPEs in block 00 to 3F [ 0.163039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.163046] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.163069] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.163507] PCI host bridge to bus 0000:00 [ 0.163510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.163564] DMAR: Forcing write-buffer flush capability [ 0.163565] DMAR: Disabling IOMMU for graphics on this chipset [ 0.163673] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.163688] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x50f0-0x50f7] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.163836] pci 0000:00:02.1: reg 0x10: [mem 0x93400000-0x934fffff 64bit] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.164086] pci 0000:00:1a.0: reg 0x20: [io 0x50c0-0x50df] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.165822] pci 0000:00:1a.7: reg 0x10: [mem 0x96704c00-0x96704fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.171011] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.171040] pci 0000:00:1b.0: reg 0x10: [mem 0x96700000-0x96703fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.171255] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.171373] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.171494] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.171608] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.171729] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.171836] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.171963] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.172051] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.172306] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.172551] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300 [ 0.172806] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.174409] pci 0000:00:1d.7: reg 0x10: [mem 0x96704800-0x96704bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.179582] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.179745] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100 [ 0.180043] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.180068] pci 0000:00:1f.2: reg 0x10: [io 0x50e8-0x50ef] pci 0000:00:1f.2: reg 0x14: [io 0x50fc-0x50ff] pci 0000:00:1f.2: reg 0x18: [io 0x50e0-0x50e7] pci 0000:00:1f.2: reg 0x1c: [io 0x50f8-0x50fb] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f] pci 0000:00:1f.2: reg 0x24: [mem 0x96704000-0x967047ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.180284] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.180311] pci 0000:00:1f.3: reg 0x10: [mem 0x96705000-0x967050ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f] acpiphp: Slot [1] registered [ 0.180548] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref] pci 0000:04:00.0: [168c:002b] type 00 class 0x028000 [ 0.180698] pci 0000:04:00.0: reg 0x10: [mem 0x94600000-0x9460ffff 64bit] pci 0000:04:00.0: supports D1 [ 0.180896] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.181052] pci 0000:00:1c.1: PCI bridge to [bus 04] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref] pci 0000:05:00.0: [1969:1062] type 00 class 0x020000 [ 0.181199] pci 0000:05:00.0: reg 0x10: [mem 0x93500000-0x9353ffff 64bit] pci 0000:05:00.0: reg 0x18: [io 0x1000-0x107f] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.181493] pci 0000:00:1c.2: PCI bridge to [bus 05] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x945fffff] pci 0000:00:1c.2: bridge window [mem 0x92400000-0x933fffff 64bit pref] pci_bus 0000:06: extended config space not accessible [ 0.181607] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.181620] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.181622] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.181625] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.181627] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) [ 0.288238] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.288314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.288389] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.288462] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) [ 0.288535] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.288608] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.288683] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.288755] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 0.289494] ACPI: EC: interrupt unblocked [ 0.289515] ACPI: EC: event unblocked [ 0.289525] ACPI: \_SB_.PCI0.LPC_.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.289528] ACPI: \_SB_.PCI0.LPC_.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.289645] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.289645] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.289645] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.289645] vgaarb: loaded [ 0.289645] SCSI subsystem initialized [ 0.290022] libata version 3.00 loaded. [ 0.290101] EDAC MC: Ver: 3.0.0 [ 0.290146] PCI: Using ACPI for IRQ routing [ 0.292608] PCI: pci_cache_line_size set to 64 bytes [ 0.292696] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0x7b96c000-0x7bffffff] e820: reserve RAM buffer [mem 0x7ba82000-0x7bffffff] e820: reserve RAM buffer [mem 0x7baec000-0x7bffffff] e820: reserve RAM buffer [mem 0x7bb00000-0x7bffffff] NetLabel: Initializing [ 0.292853] NetLabel: domain hash size = 128 [ 0.292854] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.292877] NetLabel: unlabeled traffic allowed by default [ 0.293026] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.293032] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.293037] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.295028] clocksource: Switched to clocksource tsc-early [ 0.317876] VFS: Disk quotas dquot_6.6.0 [ 0.317909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.318049] pnp: PnP ACPI init [ 0.424104] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff] system 00:00: [io 0x0600-0x060f] has been reserved [ 0.424187] system 00:00: [io 0x0610] has been reserved [ 0.424189] system 00:00: [io 0x0800-0x080f] has been reserved [ 0.424191] system 00:00: [io 0x0810-0x0817] has been reserved [ 0.424194] system 00:00: [io 0x0820-0x0823] has been reserved [ 0.424196] system 00:00: [io 0x0400-0x047f] has been reserved [ 0.424198] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.424201] system 00:00: [io 0xff2c-0xff2f] has been reserved [ 0.424204] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.424207] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.424209] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.424212] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.424214] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.424217] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.424219] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.424221] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.424230] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.424301] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.424389] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.424482] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1d SYN1b00 SYN0002 PNP0f13 (active) [ 0.424654] pnp: PnP ACPI: found 4 devices [ 0.431014] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.431067] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 04] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff] pci 0000:00:1c.1: bridge window [mem 0x91400000-0x923fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 05] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff] pci 0000:00:1c.2: bridge window [mem 0x93500000-0x945fffff] pci 0000:00:1c.2: bridge window [mem 0x92400000-0x933fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0x95700000-0x966fffff] pci_bus 0000:02: resource 2 [mem 0x90400000-0x913fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] pci_bus 0000:04: resource 1 [mem 0x94600000-0x956fffff] pci_bus 0000:04: resource 2 [mem 0x91400000-0x923fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] pci_bus 0000:05: resource 1 [mem 0x93500000-0x945fffff] pci_bus 0000:05: resource 2 [mem 0x92400000-0x933fffff 64bit pref] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:06: resource 7 [mem 0x80000000-0xfebfffff window] NET: Registered protocol family 2 [ 0.431537] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 0.431556] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.431631] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.431738] TCP: Hash tables configured (established 16384 bind 16384) [ 0.431812] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.431833] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.431937] NET: Registered protocol family 1 [ 0.431946] NET: Registered protocol family 44 [ 0.431965] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x6c3 took 12363 usecs [ 0.459048] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6c3 took 12443 usecs [ 0.459076] pci 0000:05:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 0.459081] PCI: CLS 64 bytes, default 64 [ 0.459146] Trying to unpack rootfs image as initramfs... [ 0.678884] Freeing initrd memory: 13168K [ 0.679815] Initialise system trusted keyrings [ 0.679926] workingset: timestamp_bits=56 max_order=19 bucket_order=0 [ 0.682624] zbud: loaded [ 0.683677] pstore: using deflate compression [ 0.684759] Key type asymmetric registered [ 0.684761] Asymmetric key parser 'x509' registered [ 0.684823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.684867] io scheduler noop registered [ 0.684869] io scheduler deadline registered [ 0.684925] io scheduler cfq registered (default) [ 0.684926] io scheduler mq-deadline registered [ 0.684927] io scheduler kyber registered [ 0.684975] io scheduler bfq registered [ 0.685269] pcieport 0000:00:1c.0: enabling device (0001 -> 0003) [ 0.686107] vesafb: mode is 1024x768x16, linelength=2048, pages=41 [ 0.686108] vesafb: scrolling: redraw [ 0.686110] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.686129] vesafb: framebuffer at 0x80000000, mapped to 0x(____ptrval____), using 3072k, total 65472k [ 0.698294] Console: switching to colour frame buffer device 128x48 [ 0.710300] fb0: VESA VGA frame buffer device [ 0.710322] intel_idle: does not run on family 6 model 23 [ 0.710445] Monitor-Mwait will be used to enter C-1 state [ 0.710452] Monitor-Mwait will be used to enter C-2 state [ 0.710457] tsc: Marking TSC unstable due to TSC halts in idle [ 0.710544] clocksource: Switched to clocksource hpet [ 0.711157] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.711703] Linux agpgart interface v0.103 [ 0.714795] brd: module loaded [ 0.715353] ahci 0000:00:1f.2: version 3.0 [ 0.715706] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.715747] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.715751] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs [ 0.726747] scsi host0: ahci [ 0.726954] scsi host1: ahci [ 0.727113] scsi host2: ahci [ 0.727237] scsi host3: ahci [ 0.727366] scsi host4: ahci [ 0.727496] scsi host5: ahci [ 0.727544] ata1: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704100 irq 24 [ 0.727547] ata2: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704180 irq 24 [ 0.727548] ata3: DUMMY [ 0.727549] ata4: DUMMY [ 0.727551] ata5: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704300 irq 24 [ 0.727554] ata6: SATA max UDMA/133 abar m2048@0x96704000 port 0x96704380 irq 24 [ 0.727726] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 0.754688] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.754695] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.754901] mousedev: PS/2 mouse device common for all mice [ 0.756242] rtc_cmos 00:01: RTC can wake from S4 [ 0.756431] rtc_cmos 00:01: registered as rtc0 [ 0.756453] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.756499] ledtrig-cpu: registered to indicate activity on CPUs [ 0.756748] Key type dns_resolver registered [ 0.756750] mpls_gso: MPLS GSO support [ 0.756957] microcode: sig=0x1067a, pf=0x80, revision=0xa0b [ 0.757032] microcode: Microcode Update Driver: v2.2. [ 0.757222] registered taskstats version 1 [ 0.757223] Loading compiled-in X.509 certificates [ 0.757279] zswap: loaded using pool lzo/zbud [ 0.757939] Btrfs loaded, crc32c=crc32c-generic [ 0.761245] Key type encrypted registered [ 0.761737] Magic number: 7:546:165 [ 0.761907] rtc_cmos 00:01: setting system clock to 2023-09-17 06:11:38 UTC (1694931098) [ 0.761989] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 0.784810] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.200077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.233800] ata1.00: ATA-8: WDC WD2500BEVT-00ZCT0, 11.01A11, max UDMA/133 [ 1.233802] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 1.235828] ata1.00: configured for UDMA/133 [ 1.236073] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-0 1A11 PQ: 0 ANSI: 5 [ 1.236393] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.236408] sd 0:0:0:0: [sda] Write Protect is off [ 1.236410] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.236435] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.275894] sda: sda1 sda2 [ 1.276272] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.506252] random: fast init done [ 1.704076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.705879] ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100 [ 1.708565] ata2.00: configured for UDMA/100 [ 1.714492] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.00 PQ: 0 ANSI: 5 [ 2.045915] ata5: SATA link down (SStatus 0 SControl 300) [ 2.356976] ata6: SATA link down (SStatus 0 SControl 300) [ 2.357030] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 2.359936] Freeing unused kernel image memory: 1568K [ 2.367055] Write protecting the kernel read-only data: 18432k [ 2.368521] Freeing unused kernel image memory: 2016K [ 2.368887] Freeing unused kernel image memory: 424K [ 2.466124] laci-pc dracut: dracut-046 [ 2.953198] pci 0000:00:00.0: Intel GM45 Chipset [ 2.953221] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 2.953522] pci 0000:00:00.0: detected 65536K stolen memory [ 2.953560] checking generic (80000000 3ff0000) vs hw (80000000 10000000) [ 2.953562] fb: switching to inteldrmfb from VESA VGA [ 2.953600] Console: switching to colour dummy device 80x25 [ 2.954226] [drm] Replacing VGA console driver [ 2.954985] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.954987] [drm] Driver supports precise vblank timestamp query. [ 2.955628] [drm] applying inverted panel brightness quirk [ 2.955678] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.976462] [drm] RC6 disabled, disabling runtime PM support [ 2.977389] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 2.978118] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 3.296107] acpi device:06: registered as cooling_device2 [ 3.296195] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input2 [ 3.307204] fbcon: inteldrmfb (fb0) is primary device [ 4.008566] Console: switching to colour frame buffer device 170x48 [ 4.027358] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.045660] laci-pc dracut: Starting plymouth daemon [ 4.359643] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.359648] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.359921] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.394498] ACPI: bus type USB registered [ 4.394531] usbcore: registered new interface driver usbfs [ 4.394544] usbcore: registered new interface driver hub [ 4.396683] usbcore: registered new device driver usb [ 4.418346] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.419212] ehci-pci: EHCI PCI platform driver [ 4.419535] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 4.419545] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.419563] ehci-pci 0000:00:1a.7: debug port 1 [ 4.423481] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 4.436068] ehci-pci 0000:00:1a.7: irq 21, io mem 0x96704c00 [ 4.443036] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.443215] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 4.443217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.443220] usb usb1: Product: EHCI Host Controller [ 4.443221] usb usb1: Manufacturer: Linux 4.18.16-desktop-1bP ehci_hcd [ 4.443223] usb usb1: SerialNumber: ... [ 4.443468] hub 1-0:1.0: USB hub found [ 4.443478] hub 1-0:1.0: 2 ports detected [ 4.443947] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 4.443959] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.443974] ehci-pci 0000:00:1d.7: debug port 1 [ 4.447928] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 4.449066] ehci-pci 0000:00:1d.7: irq 23, io mem 0x96704800 [ 4.456035] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.456155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 4.456158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.456160] usb usb2: Product: EHCI Host Controller [ 4.456162] usb usb2: Manufacturer: Linux 4.18.16-desktop-1bP ehci_hcd [ 4.456164] usb usb2: SerialNumber: ... [ 4.456371] hub 2-0:1.0: USB hub found [ 4.456381] hub 2-0:1.0: 8 ports detected [ 4.460789] uhci_hcd: USB Universal Host Controller Interface driver [ 4.461156] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.461164] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.461177] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.461217] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050c0 [ 4.464074] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.464077] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.464079] usb usb3: Product: UHCI Host Controller [ 4.464081] usb usb3: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.464083] usb usb3: SerialNumber: ... [ 4.464677] hub 3-0:1.0: USB hub found [ 4.464687] hub 3-0:1.0: 2 ports detected [ 4.465149] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.465158] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 4.465172] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.465200] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0 [ 4.465276] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.465278] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.465280] usb usb4: Product: UHCI Host Controller [ 4.465282] usb usb4: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.465284] usb usb4: SerialNumber: ... [ 4.465510] hub 4-0:1.0: USB hub found [ 4.465519] hub 4-0:1.0: 2 ports detected [ 4.465933] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.465943] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 4.465953] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.466032] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080 [ 4.466121] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.466124] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.466126] usb usb5: Product: UHCI Host Controller [ 4.466127] usb usb5: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.466129] usb usb5: SerialNumber: ... [ 4.469153] hub 5-0:1.0: USB hub found [ 4.469165] hub 5-0:1.0: 2 ports detected [ 4.469634] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.469646] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 4.469657] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.469695] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005060 [ 4.469777] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.469779] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.469781] usb usb6: Product: UHCI Host Controller [ 4.469783] usb usb6: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.469785] usb usb6: SerialNumber: ... [ 4.469995] hub 6-0:1.0: USB hub found [ 4.470024] hub 6-0:1.0: 2 ports detected [ 4.470443] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 4.470454] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7 [ 4.470465] uhci_hcd 0000:00:1d.3: detected 2 ports [ 4.470518] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040 [ 4.470594] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 4.470597] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.470599] usb usb7: Product: UHCI Host Controller [ 4.470601] usb usb7: Manufacturer: Linux 4.18.16-desktop-1bP uhci_hcd [ 4.470603] usb usb7: SerialNumber: ... [ 4.470819] hub 7-0:1.0: USB hub found [ 4.470828] hub 7-0:1.0: 2 ports detected [ 4.785289] PM: Image not found (code -22) [ 4.818440] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 4.818442] EXT4-fs (sda1): write access will be enabled during recovery [ 4.969035] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 5.004383] random: crng init done [ 5.145107] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 [ 5.145110] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 5.145132] usb 4-1: Product: CSR8510 A10 [ 5.665038] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 5.830750] usb 2-4: New USB device found, idVendor=04f2, idProduct=b044, bcdDevice=11.12 [ 5.830753] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 5.830755] usb 2-4: Product: CNF7017 [ 5.830756] usb 2-4: Manufacturer: Chicony Electronics Co., Ltd. [ 5.830758] usb 2-4: SerialNumber: ... [ 13.296209] EXT4-fs (sda1): recovery complete [ 13.339146] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 13.508921] laci-pc dracut: Checking ext4: /dev/disk/by-uuid/HASH_68C-182A-402C-4045-0AC43D0A1D3A [ 13.509213] laci-pc dracut: issuing e2fsck -a /dev/disk/by-uuid/HASH_68C-182A-402C-4045-0AC43D0A1D3A [ 13.624139] laci-pc dracut: /dev/disk/by-uuid/HASH_68C-182A-402C-4045-0AC43D0A1D3A: clean, 463315/15020640 files, 9580889/59965440 blocks [ 13.627320] laci-pc dracut: Mounting /dev/disk/by-uuid/HASH_68C-182A-402C-4045-0AC43D0A1D3A with -o rw,noatime,ro [ 13.736374] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 13.948192] laci-pc dracut: Mounted root filesystem /dev/sda1 [ 14.345693] laci-pc dracut: Switching root [ 14.354049] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 15.636878] NET: Registered protocol family 10 [ 15.637395] Segment Routing with IPv6 [ 21.575630] vboxsf: err -19 connecting to guest PCI-device [ 21.575695] vboxsf: make sure you are inside a VirtualBox VM [ 21.575761] vboxsf: and check dmesg for vboxguest errors [ 21.600403] EXT4-fs (sda1): re-mounted. Opts: (null) [ 25.700260] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input3 [ 25.700274] ACPI: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input4 [ 25.700355] ACPI: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input5 [ 25.700420] ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 25.700536] ACPI: Power Button [PWRF] wmi_bus wmi_bus-PNP0C14:00: WQXM data block query control method not found [ 26.351437] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 26.402555] atl1c 0000:05:00.0: version XXX.XXX.XXX.XXX-NAPI [ 26.451483] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 26.683975] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 26.683979] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 26.683982] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 26.683983] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 26.683985] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 26.683988] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 26.695516] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 26.695848] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 26.695924] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 26.733908] ACPI: AC Adapter [AC] (on-line) [ 26.989456] ath: phy0: Enable LNA combining [ 26.992143] ath: phy0: ASPM enabled: 0x43 [ 26.992146] ath: EEPROM regdomain: 0x65 [ 26.992147] ath: EEPROM indicates we should expect a direct regpair map [ 26.992151] ath: Country alpha2 being used: 00 [ 26.992151] ath: Regpair used: 0x65 [ 27.080650] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 27.081170] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa8b840830000, irq=17 [ 27.135071] ACPI: Battery Slot [BAT0] (battery absent) [ 27.874756] thermal LNXTHERM:00: registered as thermal_zone0 [ 27.874761] ACPI: Thermal Zone [TZ01] (39 C) [ 28.488948] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 28.511626] wl: loading out-of-tree module taints kernel. [ 28.511635] wl: module license 'MIXED/Proprietary' taints kernel. [ 28.511636] Disabling lock debugging due to kernel taint [ 29.700853] Bluetooth: Core ver 2.22 [ 29.700911] NET: Registered protocol family 31 [ 29.700912] Bluetooth: HCI device and connection manager initialized [ 29.702912] Bluetooth: HCI socket layer initialized [ 29.702917] Bluetooth: L2CAP socket layer initialized [ 29.702935] Bluetooth: SCO socket layer initialized [ 29.748722] usbcore: registered new interface driver btusb [ 29.840708] media: Linux media interface: v0.10 [ 29.983770] videodev: Linux video capture interface: v2.00 [ 30.243341] uvcvideo: Found UVC 1.00 device CNF7017 (04f2:b044) [ 30.311124] uvcvideo 2-4:1.0: Entity type for entity Extension 5 was not initialized! [ 30.311128] uvcvideo 2-4:1.0: Entity type for entity Extension 4 was not initialized! [ 30.311130] uvcvideo 2-4:1.0: Entity type for entity Processing 3 was not initialized! [ 30.311133] uvcvideo 2-4:1.0: Entity type for entity Camera 1 was not initialized! [ 30.311263] input: CNF7017: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input11 [ 30.311386] usbcore: registered new interface driver uvcvideo [ 30.311387] USB Video Class driver (1.1.1) [ 30.402802] intel_powerclamp: No package C-state available [ 30.551706] Adding 4334700k swap on /dev/sda2. Priority:-2 extents:1 across:4334700k FS [ 31.354129] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000/0x0, board id: 0, fw id: 502560 [ 31.525425] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 32.468694] acer_wmi: Acer Laptop ACPI-WMI Extras [ 32.470318] acer_wmi: Function bitmap for Communication Device: 0x1 [ 32.843311] vboxsf: err -19 connecting to guest PCI-device [ 32.843395] vboxsf: make sure you are inside a VirtualBox VM [ 32.843468] vboxsf: and check dmesg for vboxguest errors [ 33.184482] iTCO_vendor_support: vendor-support=0 [ 33.186063] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 33.186130] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) [ 33.186773] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 33.246772] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 33.316925] gpio_ich: GPIO from 451 to 511 on gpio_ich [ 33.412187] vboxsf: err -19 connecting to guest PCI-device [ 33.412266] vboxsf: make sure you are inside a VirtualBox VM [ 33.412342] vboxsf: and check dmesg for vboxguest errors [ 33.728989] atl1c 0000:05:00.0 enp5s0: renamed from eth0 [ 34.270181] device-mapper: uevent: version 1.0.3 [ 34.274216] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: XXX@XXX [ 36.779742] CAPI 2.0 started up with major 68 (middleware) [ 38.328579] Adding 8388604k swap on /var/swap. Priority:-3 extents:27 across:12435452k FS [ 41.650269] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 41.650271] Bluetooth: BNEP filters: protocol multicast [ 41.650277] Bluetooth: BNEP socket layer initialized [ 41.858795] NET: Registered protocol family 38 [ 43.860982] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 43.873724] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 43.879754] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 43.895478] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 43.919085] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 51.075283] NET: Registered protocol family 17 [ 51.152731] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 52.075130] loop: module loaded [ 52.702198] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 56.230876] Initializing XFRM netlink socket [ 57.161466] cryptd: max_cpu_qlen set to 1000 [ 59.747311] AVX or AES-NI instructions are not detected. [ 59.758841] AVX or AES-NI instructions are not detected. [ 63.989397] IPv4 over IPsec tunneling driver [ 65.300139] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 65.333919] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 65.358603] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 67.989960] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 67.998119] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 68.022291] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 78.259364] Bluetooth: RFCOMM TTY layer initialized [ 78.259374] Bluetooth: RFCOMM socket layer initialized [ 78.259388] Bluetooth: RFCOMM ver 1.11 [ 115.195733] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 143.448487] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 143.467604] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 143.469275] wlp4s0: authenticated [ 143.472136] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 143.492929] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 143.493089] wlp4s0: associated [ 143.513782] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 162.402152] fuse init (API version 7.27) [ 6626.043838] pci 0000:00:1e.0: PCI bridge to [bus 06] pci_bus 0000:06: Allocating resources [ 6626.043962] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 6626.043966] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 6626.043969] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000 [ 6626.043981] pci 0000:00:1e.0: BAR 14: assigned [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: BAR 15: assigned [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [ 6626.152227] pci_bus 0000:04: Allocating resources [ 6626.152260] pci_bus 0000:05: Allocating resources [ 6626.152286] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] PM: suspend entry (deep) [ 6635.480805] PM: Syncing filesystems ... [ 6636.759091] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6638.368948] done. [ 6638.433675] Freezing user space processes ... (elapsed 0.331 seconds) done. [ 6638.765218] OOM killer disabled. [ 6638.765218] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 6638.766232] Suspending console(s) (use no_console_suspend to debug) [ 6638.781095] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6638.781306] sd 0:0:0:0: [sda] Stopping disk [ 6639.152447] ACPI: EC: interrupt blocked [ 6639.166233] ACPI: Preparing to enter system sleep state S3 [ 6639.166390] ACPI: EC: event blocked [ 6639.166391] ACPI: EC: EC stopped [ 6639.166391] PM: Saving platform NVS memory [ 6639.166713] Disabling non-boot CPUs ... [ 6639.173536] smpboot: CPU 1 is now offline [ 6639.174047] ACPI: Low-level resume complete [ 6639.174047] ACPI: EC: EC started [ 6639.174047] PM: Restoring platform NVS memory [ 6639.180411] Enabling non-boot CPUs ... [ 6639.180467] x86: Booting SMP configuration: [ 6639.180468] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6639.391969] cache: parent cpu1 should not be sleeping [ 6639.612060] CPU1 is up [ 6639.613971] ACPI: Waking up from system sleep state S3 [ 6639.616989] ACPI: EC: interrupt unblocked [ 6639.630796] usb usb3: root hub lost power or was reset [ 6639.630882] usb usb4: root hub lost power or was reset [ 6639.630935] usb usb5: root hub lost power or was reset [ 6639.630948] usb usb6: root hub lost power or was reset [ 6639.630991] usb usb7: root hub lost power or was reset [ 6639.632093] ath: phy0: ASPM enabled: 0x43 [ 6639.636427] ACPI: button: The lid device is not compliant to SW_LID. [ 6639.636465] sd 0:0:0:0: [sda] Starting disk [ 6639.736559] ACPI: EC: event unblocked [ 6639.873080] usb 2-4: reset high-speed USB device number 3 using ehci-pci [ 6639.949393] ata6: SATA link down (SStatus 0 SControl 300) [ 6639.949425] ata5: SATA link down (SStatus 0 SControl 300) [ 6639.969061] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [ 6640.103074] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6640.110675] ata2.00: configured for UDMA/100 [ 6640.831757] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6642.840771] ata1.00: configured for UDMA/133 [ 6642.861434] OOM killer enabled. [ 6642.861435] Restarting tasks ... done. [ 6642.870074] video LNXVIDEO:01: Restoring backlight state [ 6642.870923] PM: suspend exit [ 6645.414082] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 6645.426992] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [ 6645.580474] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6646.066524] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6648.326950] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6652.670774] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 6652.685030] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6652.686983] wlp4s0: authenticated [ 6652.688439] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6652.753781] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 6652.753944] wlp4s0: associated [ 6652.780566] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 6698.005575] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 6698.264710] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6698.331691] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6699.273301] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 6700.296250] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [ 6700.317090] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 6700.318988] wlp4s0: authenticated [ 6700.320284] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 6700.385670] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [ 6700.385841] wlp4s0: associated [ 6700.393554] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [20009.427657] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [20009.427796] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [20009.536021] pci_bus 0000:04: Allocating resources [20009.536048] pci_bus 0000:05: Allocating resources [20009.536067] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] PM: suspend entry (deep) [20016.037908] PM: Syncing filesystems ... [20016.857762] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [20017.542240] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20017.996550] done. [20018.045834] Freezing user space processes ... (elapsed 0.306 seconds) done. [20018.352220] OOM killer disabled. [20018.352221] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [20018.353253] Suspending console(s) (use no_console_suspend to debug) [20018.366928] sd 0:0:0:0: [sda] Synchronizing SCSI cache [20018.443821] sd 0:0:0:0: [sda] Stopping disk [20018.859460] ACPI: EC: interrupt blocked [20018.872228] ACPI: Preparing to enter system sleep state S3 [20018.872384] ACPI: EC: event blocked [20018.872385] ACPI: EC: EC stopped [20018.872386] PM: Saving platform NVS memory [20018.872715] Disabling non-boot CPUs ... [20018.879486] smpboot: CPU 1 is now offline [20018.879538] ACPI: Low-level resume complete [20018.879538] ACPI: EC: EC started [20018.879538] PM: Restoring platform NVS memory [20018.886261] Enabling non-boot CPUs ... [20018.886318] x86: Booting SMP configuration: [20018.886319] smpboot: Booting Node 0 Processor 1 APIC 0x1 [20019.822150] cache: parent cpu1 should not be sleeping [20019.918901] CPU1 is up [20019.921613] ACPI: Waking up from system sleep state S3 [20019.924931] ACPI: EC: interrupt unblocked [20019.938469] usb usb3: root hub lost power or was reset [20019.938564] usb usb4: root hub lost power or was reset [20019.938616] usb usb5: root hub lost power or was reset [20019.938638] usb usb6: root hub lost power or was reset [20019.938674] usb usb7: root hub lost power or was reset [20019.939777] ath: phy0: ASPM enabled: 0x43 [20019.939838] sd 0:0:0:0: [sda] Starting disk [20020.047596] ACPI: EC: event unblocked [20020.180068] usb 2-4: reset high-speed USB device number 3 using ehci-pci [20020.260683] ata5: SATA link down (SStatus 0 SControl 300) [20020.260718] ata6: SATA link down (SStatus 0 SControl 300) [20020.283082] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [20020.415077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [20020.419645] ata2.00: configured for UDMA/100 [20021.139356] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [20022.580491] ata1.00: configured for UDMA/133 [20022.583823] OOM killer enabled. [20022.583825] Restarting tasks ... done. [20022.594098] video LNXVIDEO:01: Restoring backlight state [20022.596071] PM: suspend exit [20022.704884] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20023.046494] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20023.532385] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [20023.544791] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [20023.553868] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20026.643292] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [20030.810378] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [20030.824428] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [20030.826205] wlp4s0: authenticated [20030.827053] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [20030.847837] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [20030.847992] wlp4s0: associated [20030.857510] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [29068.581774] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [29068.581907] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [29068.688131] pci_bus 0000:04: Allocating resources [29068.688161] pci_bus 0000:05: Allocating resources [29068.688185] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [29071.220112] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [29071.253626] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [29071.321342] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [29074.054425] PM: suspend entry (deep) [29074.054428] PM: Syncing filesystems ... [29075.293101] done. [29075.332385] Freezing user space processes ... (elapsed 0.089 seconds) done. [29075.422380] OOM killer disabled. [29075.422381] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done. [29075.426828] Suspending console(s) (use no_console_suspend to debug) [29075.435534] sd 0:0:0:0: [sda] Synchronizing SCSI cache [29075.542019] sd 0:0:0:0: [sda] Stopping disk [29075.882473] ACPI: EC: interrupt blocked [29075.896227] ACPI: Preparing to enter system sleep state S3 [29075.896392] ACPI: EC: event blocked [29075.896393] ACPI: EC: EC stopped [29075.896394] PM: Saving platform NVS memory [29075.896723] Disabling non-boot CPUs ... [29075.903478] smpboot: CPU 1 is now offline [29075.903542] ACPI: Low-level resume complete [29075.903542] ACPI: EC: EC started [29075.903542] PM: Restoring platform NVS memory [29075.910256] Enabling non-boot CPUs ... [29075.910312] x86: Booting SMP configuration: [29075.910314] smpboot: Booting Node 0 Processor 1 APIC 0x1 [29076.067178] cache: parent cpu1 should not be sleeping [29076.197088] CPU1 is up [29076.198657] ACPI: Waking up from system sleep state S3 [29076.201609] ACPI: EC: interrupt unblocked [29076.215348] usb usb3: root hub lost power or was reset [29076.215624] usb usb4: root hub lost power or was reset [29076.215695] usb usb5: root hub lost power or was reset [29076.215755] usb usb6: root hub lost power or was reset [29076.215825] usb usb7: root hub lost power or was reset [29076.217020] ath: phy0: ASPM enabled: 0x43 [29076.221049] sd 0:0:0:0: [sda] Starting disk [29076.319598] ACPI: EC: event unblocked [29076.459067] usb 2-4: reset high-speed USB device number 3 using ehci-pci [29076.540648] ata5: SATA link down (SStatus 0 SControl 300) [29076.540674] ata6: SATA link down (SStatus 0 SControl 300) [29076.554078] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [29076.696080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [29076.703615] ata2.00: configured for UDMA/100 [29077.413096] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [29079.595420] ata1.00: configured for UDMA/133 [29079.616537] OOM killer enabled. [29079.616538] Restarting tasks ... done. [29079.633112] video LNXVIDEO:01: Restoring backlight state [29079.633924] PM: suspend exit [29079.677241] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [29079.689890] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [29079.694328] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [29079.780271] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [29080.026279] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [29081.075664] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [29082.672686] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [29082.693317] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [29082.697920] wlp4s0: authenticated [29082.699362] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [29082.764742] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [29082.764891] wlp4s0: associated [29082.894405] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [31094.622932] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [31094.623110] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [31094.735963] pci_bus 0000:04: Allocating resources [31094.735991] pci_bus 0000:05: Allocating resources [31094.736039] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [31095.445719] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [31095.481159] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [31095.542345] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [31099.981943] PM: suspend entry (deep) [31099.981946] PM: Syncing filesystems ... [31102.596721] done. [31102.623146] Freezing user space processes ... (elapsed 0.024 seconds) done. [31102.647753] OOM killer disabled. [31102.647754] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [31102.649185] Suspending console(s) (use no_console_suspend to debug) [31102.664156] sd 0:0:0:0: [sda] Synchronizing SCSI cache [31102.823335] sd 0:0:0:0: [sda] Stopping disk [31103.144467] ACPI: EC: interrupt blocked [31103.157206] ACPI: Preparing to enter system sleep state S3 [31103.157341] ACPI: EC: event blocked [31103.157342] ACPI: EC: EC stopped [31103.157343] PM: Saving platform NVS memory [31103.157635] Disabling non-boot CPUs ... [31103.164480] smpboot: CPU 1 is now offline [31103.164674] ACPI: Low-level resume complete [31103.164674] ACPI: EC: EC started [31103.164674] PM: Restoring platform NVS memory [31103.171288] Enabling non-boot CPUs ... [31103.171347] x86: Booting SMP configuration: [31103.171348] smpboot: Booting Node 0 Processor 1 APIC 0x1 [31103.702155] cache: parent cpu1 should not be sleeping [31103.815313] CPU1 is up [31103.817750] ACPI: Waking up from system sleep state S3 [31103.820680] ACPI: EC: interrupt unblocked [31103.834601] usb usb3: root hub lost power or was reset [31103.834883] usb usb4: root hub lost power or was reset [31103.834944] usb usb5: root hub lost power or was reset [31103.835008] usb usb6: root hub lost power or was reset [31103.835097] usb usb7: root hub lost power or was reset [31103.836244] ath: phy0: ASPM enabled: 0x43 [31103.837346] sd 0:0:0:0: [sda] Starting disk [31103.943792] ACPI: EC: event unblocked [31104.083069] usb 2-4: reset high-speed USB device number 3 using ehci-pci [31104.156614] ata6: SATA link down (SStatus 0 SControl 300) [31104.156659] ata5: SATA link down (SStatus 0 SControl 300) [31104.171079] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [31104.312079] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [31104.316647] ata2.00: configured for UDMA/100 [31105.028065] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [31106.837446] ata1.00: configured for UDMA/133 [31106.858466] OOM killer enabled. [31106.858468] Restarting tasks ... done. [31106.868843] video LNXVIDEO:01: Restoring backlight state [31106.874088] PM: suspend exit [31106.942493] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [31106.955757] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [31106.960361] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [31107.021078] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [31107.076851] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [31108.080393] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [31109.136832] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [31109.155691] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [31109.157368] wlp4s0: authenticated [31109.159567] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [31109.180345] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [31109.180503] wlp4s0: associated [31109.187199] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [36542.605263] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [36542.605417] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [36542.711977] pci_bus 0000:04: Allocating resources [36542.712028] pci_bus 0000:05: Allocating resources [36542.712049] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [36544.737127] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [36544.778567] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [36544.862146] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [36548.248196] PM: suspend entry (deep) [36548.248201] PM: Syncing filesystems ... [36552.405664] done. [36552.457221] Freezing user space processes ... (elapsed 0.024 seconds) done. [36552.481476] OOM killer disabled. [36552.481477] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [36552.482945] Suspending console(s) (use no_console_suspend to debug) [36552.496148] sd 0:0:0:0: [sda] Synchronizing SCSI cache [36552.694521] sd 0:0:0:0: [sda] Stopping disk [36553.015453] ACPI: EC: interrupt blocked [36553.028224] ACPI: Preparing to enter system sleep state S3 [36553.028358] ACPI: EC: event blocked [36553.028359] ACPI: EC: EC stopped [36553.028360] PM: Saving platform NVS memory [36553.028650] Disabling non-boot CPUs ... [36553.035478] smpboot: CPU 1 is now offline [36553.035540] ACPI: Low-level resume complete [36553.035540] ACPI: EC: EC started [36553.035540] PM: Restoring platform NVS memory [36553.042267] Enabling non-boot CPUs ... [36553.042324] x86: Booting SMP configuration: [36553.042325] smpboot: Booting Node 0 Processor 1 APIC 0x1 [36553.485001] cache: parent cpu1 should not be sleeping [36553.578111] CPU1 is up [36553.579802] ACPI: Waking up from system sleep state S3 [36553.582749] ACPI: EC: interrupt unblocked [36553.596730] usb usb3: root hub lost power or was reset [36553.596825] usb usb4: root hub lost power or was reset [36553.596882] usb usb5: root hub lost power or was reset [36553.596884] usb usb6: root hub lost power or was reset [36553.596935] usb usb7: root hub lost power or was reset [36553.598038] ath: phy0: ASPM enabled: 0x43 [36553.598855] sd 0:0:0:0: [sda] Starting disk [36553.704739] ACPI: EC: event unblocked [36553.841052] usb 2-4: reset high-speed USB device number 3 using ehci-pci [36553.917616] ata6: SATA link down (SStatus 0 SControl 300) [36553.924833] ata5: SATA link down (SStatus 0 SControl 300) [36553.937064] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [36554.071080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [36554.078620] ata2.00: configured for UDMA/100 [36554.803411] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [36556.759214] ata1.00: configured for UDMA/133 [36556.782393] OOM killer enabled. [36556.782394] Restarting tasks ... done. [36556.807066] video LNXVIDEO:01: Restoring backlight state [36556.808616] PM: suspend exit [36556.942075] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [36556.954869] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [36556.957685] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [36556.999399] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [36557.288202] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [36558.326999] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [36559.520249] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [36559.539910] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [36559.546039] wlp4s0: authenticated [36559.551051] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [36559.616413] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [36559.616564] wlp4s0: associated [36559.623477] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [37789.608892] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [37789.609062] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [37789.720556] pci_bus 0000:04: Allocating resources [37789.720583] pci_bus 0000:05: Allocating resources [37789.720608] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [37790.648589] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [37790.692288] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [37790.802164] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [37794.983742] PM: suspend entry (deep) [37794.983745] PM: Syncing filesystems ... done. [37797.817935] Freezing user space processes ... (elapsed 0.001 seconds) done. [37797.819813] OOM killer disabled. [37797.819814] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [37797.821239] Suspending console(s) (use no_console_suspend to debug) [37797.834175] sd 0:0:0:0: [sda] Synchronizing SCSI cache [37797.987810] sd 0:0:0:0: [sda] Stopping disk [37798.309466] ACPI: EC: interrupt blocked [37798.323243] ACPI: Preparing to enter system sleep state S3 [37798.323402] ACPI: EC: event blocked [37798.323403] ACPI: EC: EC stopped [37798.323404] PM: Saving platform NVS memory [37798.323730] Disabling non-boot CPUs ... [37798.330489] smpboot: CPU 1 is now offline [37798.331081] ACPI: Low-level resume complete [37798.331081] ACPI: EC: EC started [37798.331081] PM: Restoring platform NVS memory [37798.337363] Enabling non-boot CPUs ... [37798.337421] x86: Booting SMP configuration: [37798.337423] smpboot: Booting Node 0 Processor 1 APIC 0x1 [37798.638021] cache: parent cpu1 should not be sleeping [37798.736124] CPU1 is up [37798.737771] ACPI: Waking up from system sleep state S3 [37798.740705] ACPI: EC: interrupt unblocked [37798.754286] usb usb3: root hub lost power or was reset [37798.754577] usb usb4: root hub lost power or was reset [37798.754643] usb usb5: root hub lost power or was reset [37798.754697] usb usb6: root hub lost power or was reset [37798.754762] usb usb7: root hub lost power or was reset [37798.755938] ath: phy0: ASPM enabled: 0x43 [37798.768569] sd 0:0:0:0: [sda] Starting disk [37798.863581] ACPI: EC: event unblocked [37798.994062] usb 2-4: reset high-speed USB device number 3 using ehci-pci [37799.076324] ata5: SATA link down (SStatus 0 SControl 300) [37799.076592] ata6: SATA link down (SStatus 0 SControl 300) [37799.089044] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [37799.231060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [37799.238593] ata2.00: configured for UDMA/100 [37799.956971] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [37802.025559] ata1.00: configured for UDMA/133 [37802.046456] OOM killer enabled. [37802.046457] Restarting tasks ... done. [37802.065198] video LNXVIDEO:01: Restoring backlight state [37802.067071] PM: suspend exit [37802.082660] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [37802.095824] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [37802.099183] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [37802.183097] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [37802.349983] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [37803.385821] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [37804.440256] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [37804.459644] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [37804.464076] wlp4s0: authenticated [37804.468708] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [37804.536537] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [37804.536694] wlp4s0: associated [37804.545167] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [39568.241707] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [39568.241836] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [39568.352331] pci_bus 0000:04: Allocating resources [39568.352360] pci_bus 0000:05: Allocating resources [39568.352385] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [39568.885493] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [39568.918530] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [39568.988874] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [39571.802157] PM: suspend entry (deep) [39571.802159] PM: Syncing filesystems ... done. [39572.692801] Freezing user space processes ... (elapsed 0.023 seconds) done. [39572.716762] OOM killer disabled. [39572.716764] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [39572.718190] Suspending console(s) (use no_console_suspend to debug) [39572.731135] sd 0:0:0:0: [sda] Synchronizing SCSI cache [39572.830981] sd 0:0:0:0: [sda] Stopping disk [39573.169471] ACPI: EC: interrupt blocked [39573.182206] ACPI: Preparing to enter system sleep state S3 [39573.182362] ACPI: EC: event blocked [39573.182363] ACPI: EC: EC stopped [39573.182364] PM: Saving platform NVS memory [39573.182685] Disabling non-boot CPUs ... [39573.189476] smpboot: CPU 1 is now offline [39573.189663] ACPI: Low-level resume complete [39573.189663] ACPI: EC: EC started [39573.189663] PM: Restoring platform NVS memory [39573.196256] Enabling non-boot CPUs ... [39573.196314] x86: Booting SMP configuration: [39573.196316] smpboot: Booting Node 0 Processor 1 APIC 0x1 [39573.429995] cache: parent cpu1 should not be sleeping [39573.568062] CPU1 is up [39573.569790] ACPI: Waking up from system sleep state S3 [39573.572737] ACPI: EC: interrupt unblocked [39573.586737] usb usb3: root hub lost power or was reset [39573.586941] usb usb5: root hub lost power or was reset [39573.586962] usb usb4: root hub lost power or was reset [39573.586998] usb usb6: root hub lost power or was reset [39573.587006] usb usb7: root hub lost power or was reset [39573.588157] ath: phy0: ASPM enabled: 0x43 [39573.591891] sd 0:0:0:0: [sda] Starting disk [39573.695773] ACPI: EC: event unblocked [39573.833079] usb 2-4: reset high-speed USB device number 3 using ehci-pci [39573.908561] ata5: SATA link down (SStatus 0 SControl 300) [39573.908590] ata6: SATA link down (SStatus 0 SControl 300) [39573.923089] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [39574.063079] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [39574.070607] ata2.00: configured for UDMA/100 [39574.803970] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [39576.853035] ata1.00: configured for UDMA/133 [39576.873499] OOM killer enabled. [39576.873500] Restarting tasks ... done. [39576.880313] video LNXVIDEO:01: Restoring backlight state [39576.881280] PM: suspend exit [39576.993574] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [39577.007802] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [39577.012051] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [39577.067996] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [39577.186876] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [39578.214169] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [39579.240624] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [39579.260093] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39579.261766] wlp4s0: authenticated [39579.263041] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39579.328378] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [39579.328535] wlp4s0: associated [39579.335850] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [43261.743134] CE: hpet increased min_delta_ns to 20115 nsec [53236.882795] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [53236.882926] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [53236.992239] pci_bus 0000:04: Allocating resources [53236.992270] pci_bus 0000:05: Allocating resources [53236.992297] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [53239.955537] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [53240.039575] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [53240.128077] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [53242.316228] PM: suspend entry (deep) [53242.316232] PM: Syncing filesystems ... done. [53243.282680] Freezing user space processes ... (elapsed 0.023 seconds) done. [53243.306240] OOM killer disabled. [53243.306241] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [53243.307251] Suspending console(s) (use no_console_suspend to debug) [53243.324106] sd 0:0:0:0: [sda] Synchronizing SCSI cache [53243.471771] sd 0:0:0:0: [sda] Stopping disk [53243.869467] ACPI: EC: interrupt blocked [53243.882214] ACPI: Preparing to enter system sleep state S3 [53243.882349] ACPI: EC: event blocked [53243.882350] ACPI: EC: EC stopped [53243.882351] PM: Saving platform NVS memory [53243.882644] Disabling non-boot CPUs ... [53243.889461] smpboot: CPU 1 is now offline [53243.889523] ACPI: Low-level resume complete [53243.889523] ACPI: EC: EC started [53243.889523] PM: Restoring platform NVS memory [53243.896235] Enabling non-boot CPUs ... [53243.896292] x86: Booting SMP configuration: [53243.896293] smpboot: Booting Node 0 Processor 1 APIC 0x1 [53244.185064] cache: parent cpu1 should not be sleeping [53244.282109] CPU1 is up [53244.283814] ACPI: Waking up from system sleep state S3 [53244.286742] ACPI: EC: interrupt unblocked [53244.300497] usb usb3: root hub lost power or was reset [53244.300780] usb usb5: root hub lost power or was reset [53244.300799] usb usb4: root hub lost power or was reset [53244.300837] usb usb6: root hub lost power or was reset [53244.300856] usb usb7: root hub lost power or was reset [53244.301976] ath: phy0: ASPM enabled: 0x43 [53244.302539] sd 0:0:0:0: [sda] Starting disk [53244.408630] ACPI: EC: event unblocked [53244.545032] usb 2-4: reset high-speed USB device number 3 using ehci-pci [53244.620618] ata6: SATA link down (SStatus 0 SControl 300) [53244.620649] ata5: SATA link down (SStatus 0 SControl 300) [53244.642047] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [53244.775057] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [53244.792353] ata2.00: configured for UDMA/100 [53245.502012] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [53247.624991] ata1.00: configured for UDMA/133 [53247.628263] OOM killer enabled. [53247.628265] Restarting tasks ... done. [53247.642947] video LNXVIDEO:01: Restoring backlight state [53247.643835] PM: suspend exit [53247.658861] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [53247.671737] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [53247.676278] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [53247.716272] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [53248.168861] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [53249.186689] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [53250.591355] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [53250.608564] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [53250.610322] wlp4s0: authenticated [53250.616080] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [53250.682594] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [53250.682789] wlp4s0: associated [53250.688953] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [54904.314772] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [54904.314900] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [54904.427388] pci_bus 0000:04: Allocating resources [54904.427419] pci_bus 0000:05: Allocating resources [54904.427446] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [54904.671934] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [54904.705639] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [54905.051782] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [54907.367272] PM: suspend entry (deep) [54907.367276] PM: Syncing filesystems ... done. [54908.692244] Freezing user space processes ... (elapsed 0.001 seconds) done. [54908.694169] OOM killer disabled. [54908.694170] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [54908.695237] Suspending console(s) (use no_console_suspend to debug) [54908.711089] sd 0:0:0:0: [sda] Synchronizing SCSI cache [54908.851675] sd 0:0:0:0: [sda] Stopping disk [54909.170482] ACPI: EC: interrupt blocked [54909.183232] ACPI: Preparing to enter system sleep state S3 [54909.183391] ACPI: EC: event blocked [54909.183392] ACPI: EC: EC stopped [54909.183392] PM: Saving platform NVS memory [54909.183718] Disabling non-boot CPUs ... [54909.190491] smpboot: CPU 1 is now offline [54909.190658] ACPI: Low-level resume complete [54909.190658] ACPI: EC: EC started [54909.190658] PM: Restoring platform NVS memory [54909.197252] Enabling non-boot CPUs ... [54909.197309] x86: Booting SMP configuration: [54909.197311] smpboot: Booting Node 0 Processor 1 APIC 0x1 [54909.600907] cache: parent cpu1 should not be sleeping [54909.692405] CPU1 is up [54909.693763] ACPI: Waking up from system sleep state S3 [54909.696682] ACPI: EC: interrupt unblocked [54909.710491] usb usb5: root hub lost power or was reset [54909.710493] usb usb3: root hub lost power or was reset [54909.710727] usb usb7: root hub lost power or was reset [54909.710812] usb usb6: root hub lost power or was reset [54909.710896] usb usb4: root hub lost power or was reset [54909.711715] sd 0:0:0:0: [sda] Starting disk [54909.712640] ath: phy0: ASPM enabled: 0x43 [54909.815628] ACPI: EC: event unblocked [54909.955084] usb 2-4: reset high-speed USB device number 3 using ehci-pci [54910.028656] ata5: SATA link down (SStatus 0 SControl 300) [54910.036629] ata6: SATA link down (SStatus 0 SControl 300) [54910.051075] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [54910.191072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [54910.198600] ata2.00: configured for UDMA/100 [54910.913940] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [54912.834694] ata1.00: configured for UDMA/133 [54912.854525] OOM killer enabled. [54912.854527] Restarting tasks ... done. [54912.867148] video LNXVIDEO:01: Restoring backlight state [54912.868216] PM: suspend exit [54912.898032] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [54912.910898] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [54912.917604] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [54912.987649] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [54913.090644] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [54914.120869] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [54915.225856] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [54915.246583] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [54915.252135] wlp4s0: authenticated [54915.255389] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [54915.320764] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=1) [54915.320931] wlp4s0: associated [54915.327722] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [59036.733230] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [59036.733360] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [59036.839925] pci_bus 0000:04: Allocating resources [59036.839953] pci_bus 0000:05: Allocating resources [59036.839971] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [59037.386517] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [59037.418565] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [59037.469246] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [59037.668585] PM: suspend entry (deep) [59037.668589] PM: Syncing filesystems ... done. [59038.333863] Freezing user space processes ... (elapsed 0.031 seconds) done. [59038.365191] OOM killer disabled. [59038.365192] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [59038.366227] Suspending console(s) (use no_console_suspend to debug) [59038.379124] sd 0:0:0:0: [sda] Synchronizing SCSI cache [59038.475475] sd 0:0:0:0: [sda] Stopping disk [59038.814474] ACPI: EC: interrupt blocked [59038.827246] ACPI: Preparing to enter system sleep state S3 [59038.827381] ACPI: EC: event blocked [59038.827382] ACPI: EC: EC stopped [59038.827383] PM: Saving platform NVS memory [59038.827678] Disabling non-boot CPUs ... [59038.834464] smpboot: CPU 1 is now offline [59038.834638] ACPI: Low-level resume complete [59038.834638] ACPI: EC: EC started [59038.834638] PM: Restoring platform NVS memory [59038.841227] Enabling non-boot CPUs ... [59038.841286] x86: Booting SMP configuration: [59038.841287] smpboot: Booting Node 0 Processor 1 APIC 0x1 [59039.242063] cache: parent cpu1 should not be sleeping [59039.338109] CPU1 is up [59039.339801] ACPI: Waking up from system sleep state S3 [59039.342756] ACPI: EC: interrupt unblocked [59039.356618] usb usb3: root hub lost power or was reset [59039.356760] usb usb4: root hub lost power or was reset [59039.356812] usb usb5: root hub lost power or was reset [59039.356858] usb usb6: root hub lost power or was reset [59039.356870] usb usb7: root hub lost power or was reset [59039.358096] ath: phy0: ASPM enabled: 0x43 [59039.370254] sd 0:0:0:0: [sda] Starting disk [59039.464703] ACPI: EC: event unblocked [59039.601064] usb 2-4: reset high-speed USB device number 3 using ehci-pci [59039.676496] ata6: SATA link down (SStatus 0 SControl 300) [59039.676523] ata5: SATA link down (SStatus 0 SControl 300) [59039.699082] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [59039.831052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [59039.838588] ata2.00: configured for UDMA/100 [59040.567991] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [59042.542160] ata1.00: configured for UDMA/133 [59042.563348] OOM killer enabled. [59042.563350] Restarting tasks ... done. [59042.585090] video LNXVIDEO:01: Restoring backlight state [59042.587060] PM: suspend exit [59042.615143] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [59042.628040] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [59042.631623] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [59042.711123] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [59042.887140] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [59043.931499] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [59044.977751] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [59044.996348] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [59044.998421] wlp4s0: authenticated [59045.000043] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [59045.065409] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [59045.065549] wlp4s0: associated [59045.074390] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [72033.121097] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [72033.121228] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [72033.232538] pci_bus 0000:04: Allocating resources [72033.232568] pci_bus 0000:05: Allocating resources [72033.232599] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [72034.181871] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [72034.216583] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [72034.272787] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [72037.228810] PM: suspend entry (deep) [72037.228813] PM: Syncing filesystems ... done. [72038.584478] Freezing user space processes ... (elapsed 0.001 seconds) done. [72038.586269] OOM killer disabled. [72038.586270] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [72038.587250] Suspending console(s) (use no_console_suspend to debug) [72038.600770] sd 0:0:0:0: [sda] Synchronizing SCSI cache [72038.706074] sd 0:0:0:0: [sda] Stopping disk [72039.029479] ACPI: EC: interrupt blocked [72039.043214] ACPI: Preparing to enter system sleep state S3 [72039.043349] ACPI: EC: event blocked [72039.043350] ACPI: EC: EC stopped [72039.043351] PM: Saving platform NVS memory [72039.043642] Disabling non-boot CPUs ... [72039.050480] smpboot: CPU 1 is now offline [72039.050641] ACPI: Low-level resume complete [72039.050641] ACPI: EC: EC started [72039.050641] PM: Restoring platform NVS memory [72039.057238] Enabling non-boot CPUs ... [72039.057295] x86: Booting SMP configuration: [72039.057297] smpboot: Booting Node 0 Processor 1 APIC 0x1 [72039.470137] cache: parent cpu1 should not be sleeping [72039.567062] CPU1 is up [72039.568730] ACPI: Waking up from system sleep state S3 [72039.571672] ACPI: EC: interrupt unblocked [72039.585451] usb usb3: root hub lost power or was reset [72039.585736] usb usb4: root hub lost power or was reset [72039.585793] usb usb5: root hub lost power or was reset [72039.585851] usb usb6: root hub lost power or was reset [72039.585921] usb usb7: root hub lost power or was reset [72039.587094] ath: phy0: ASPM enabled: 0x43 [72039.587690] sd 0:0:0:0: [sda] Starting disk [72039.696712] ACPI: EC: event unblocked [72039.826069] usb 2-4: reset high-speed USB device number 3 using ehci-pci [72039.909714] ata6: SATA link down (SStatus 0 SControl 300) [72039.909766] ata5: SATA link down (SStatus 0 SControl 300) [72039.922061] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [72040.063054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [72040.070583] ata2.00: configured for UDMA/100 [72040.793177] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [72042.903348] ata1.00: configured for UDMA/133 [72042.925390] OOM killer enabled. [72042.925392] Restarting tasks ... done. [72042.941786] video LNXVIDEO:01: Restoring backlight state [72042.942599] PM: suspend exit [72042.969667] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [72042.982993] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [72042.993726] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [72043.054413] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [72043.095390] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [72044.137916] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [72045.200562] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [72045.219379] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [72045.221133] wlp4s0: authenticated [72045.223062] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [72045.288426] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [72045.288574] wlp4s0: associated [72045.312694] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [79687.217078] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [79687.217209] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [79687.320937] pci_bus 0000:04: Allocating resources [79687.320964] pci_bus 0000:05: Allocating resources [79687.320982] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [79694.295739] PM: suspend entry (deep) [79694.295743] PM: Syncing filesystems ... [79701.638529] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [79701.755481] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [79701.806297] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [79702.994352] done. [79703.085507] Freezing user space processes ... (elapsed 0.080 seconds) done. [79703.166191] OOM killer disabled. [79703.166192] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [79703.167240] Suspending console(s) (use no_console_suspend to debug) [79703.184122] sd 0:0:0:0: [sda] Synchronizing SCSI cache [79703.333861] sd 0:0:0:0: [sda] Stopping disk [79703.656480] ACPI: EC: interrupt blocked [79703.669239] ACPI: Preparing to enter system sleep state S3 [79703.669406] ACPI: EC: event blocked [79703.669407] ACPI: EC: EC stopped [79703.669408] PM: Saving platform NVS memory [79703.669733] Disabling non-boot CPUs ... [79703.676483] smpboot: CPU 1 is now offline [79703.676544] ACPI: Low-level resume complete [79703.676544] ACPI: EC: EC started [79703.676544] PM: Restoring platform NVS memory [79703.683242] Enabling non-boot CPUs ... [79703.683298] x86: Booting SMP configuration: [79703.683300] smpboot: Booting Node 0 Processor 1 APIC 0x1 [79703.876818] cache: parent cpu1 should not be sleeping [79704.002026] CPU1 is up [79704.005458] ACPI: Waking up from system sleep state S3 [79704.008414] ACPI: EC: interrupt unblocked [79704.022663] usb usb3: root hub lost power or was reset [79704.022757] usb usb4: root hub lost power or was reset [79704.022807] usb usb5: root hub lost power or was reset [79704.022857] usb usb6: root hub lost power or was reset [79704.022861] usb usb7: root hub lost power or was reset [79704.023991] ath: phy0: ASPM enabled: 0x43 [79704.024753] sd 0:0:0:0: [sda] Starting disk [79704.128570] ACPI: EC: event unblocked [79704.265034] usb 2-4: reset high-speed USB device number 3 using ehci-pci [79704.340435] ata5: SATA link down (SStatus 0 SControl 300) [79704.340477] ata6: SATA link down (SStatus 0 SControl 300) [79704.362049] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [79704.495040] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [79704.502613] ata2.00: configured for UDMA/100 [79705.222233] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [79707.442842] ata1.00: configured for UDMA/133 [79707.463424] OOM killer enabled. [79707.463426] Restarting tasks ... done. [79707.473075] video LNXVIDEO:01: Restoring backlight state [79707.474054] PM: suspend exit [79707.486975] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [79707.499817] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [79707.508656] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [79707.556118] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [79708.751908] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [79710.040601] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [79714.448553] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [79714.467487] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [79714.469168] wlp4s0: authenticated [79714.471043] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [79714.536640] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [79714.536793] wlp4s0: associated [79714.545271] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [123308.503435] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [123308.503564] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [123308.607877] pci_bus 0000:04: Allocating resources [123308.607904] pci_bus 0000:05: Allocating resources [123309.853270] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [123310.096807] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [123310.209107] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [123310.256772] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [123310.398640] PM: suspend entry (deep) [123310.398644] PM: Syncing filesystems ... done. [123311.683847] Freezing user space processes ... (elapsed 0.001 seconds) done. [123311.685269] OOM killer disabled. [123311.685270] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [123311.686258] Suspending console(s) (use no_console_suspend to debug) [123311.702130] sd 0:0:0:0: [sda] Synchronizing SCSI cache [123311.809919] sd 0:0:0:0: [sda] Stopping disk [123312.207467] ACPI: EC: interrupt blocked [123312.220222] ACPI: Preparing to enter system sleep state S3 [123312.220356] ACPI: EC: event blocked [123312.220357] ACPI: EC: EC stopped [123312.220358] PM: Saving platform NVS memory [123312.220648] Disabling non-boot CPUs ... [123312.227477] smpboot: CPU 1 is now offline [123312.227538] ACPI: Low-level resume complete [123312.227538] ACPI: EC: EC started [123312.227538] PM: Restoring platform NVS memory [123312.234267] Enabling non-boot CPUs ... [123312.234325] x86: Booting SMP configuration: [123312.234326] smpboot: Booting Node 0 Processor 1 APIC 0x1 [123313.157874] cache: parent cpu1 should not be sleeping [123313.503144] CPU1 is up [123313.504600] ACPI: Waking up from system sleep state S3 [123313.507503] ACPI: EC: interrupt unblocked [123313.522315] usb usb3: root hub lost power or was reset [123313.522408] usb usb4: root hub lost power or was reset [123313.522465] usb usb5: root hub lost power or was reset [123313.522467] usb usb6: root hub lost power or was reset [123313.522522] usb usb7: root hub lost power or was reset [123313.523607] ath: phy0: ASPM enabled: 0x43 [123313.523817] sd 0:0:0:0: [sda] Starting disk [123313.624664] ACPI: EC: event unblocked [123313.763065] usb 2-4: reset high-speed USB device number 3 using ehci-pci [123313.844648] ata5: SATA link down (SStatus 0 SControl 300) [123313.844689] ata6: SATA link down (SStatus 0 SControl 300) [123313.859079] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [123313.999054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [123314.003557] ata2.00: configured for UDMA/100 [123314.734483] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [123315.924212] ata1.00: configured for UDMA/133 [123315.945406] OOM killer enabled. [123315.945408] Restarting tasks ... done. [123315.953092] video LNXVIDEO:01: Restoring backlight state [123315.954474] PM: suspend exit [123316.293454] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [123316.307303] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [123316.320122] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [123316.352068] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [123316.972664] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [123317.990646] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [123319.177510] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [123319.195308] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [123319.196990] wlp4s0: authenticated [123319.199154] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [123319.264489] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [123319.264636] wlp4s0: associated [123319.271875] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [163283.634734] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [163283.634865] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [163283.744583] pci_bus 0000:04: Allocating resources [163283.744611] pci_bus 0000:05: Allocating resources [163283.744629] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [163287.149215] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [163287.314669] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [163287.384327] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [163289.328296] PM: suspend entry (deep) [163289.328299] PM: Syncing filesystems ... done. [163291.892122] Freezing user space processes ... (elapsed 0.113 seconds) done. [163292.005208] OOM killer disabled. [163292.005209] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [163292.006224] Suspending console(s) (use no_console_suspend to debug) [163292.020164] sd 0:0:0:0: [sda] Synchronizing SCSI cache [163292.020357] sd 0:0:0:0: [sda] Stopping disk [163292.415486] ACPI: EC: interrupt blocked [163292.429218] ACPI: Preparing to enter system sleep state S3 [163292.429353] ACPI: EC: event blocked [163292.429354] ACPI: EC: EC stopped [163292.429355] PM: Saving platform NVS memory [163292.429646] Disabling non-boot CPUs ... [163292.436472] smpboot: CPU 1 is now offline [163292.436535] ACPI: Low-level resume complete [163292.436535] ACPI: EC: EC started [163292.436535] PM: Restoring platform NVS memory [163292.443247] Enabling non-boot CPUs ... [163292.443306] x86: Booting SMP configuration: [163292.443307] smpboot: Booting Node 0 Processor 1 APIC 0x1 [163292.748844] cache: parent cpu1 should not be sleeping [163292.836402] CPU1 is up [163292.838839] ACPI: Waking up from system sleep state S3 [163292.841732] ACPI: EC: interrupt unblocked [163292.856444] usb usb3: root hub lost power or was reset [163292.856731] usb usb4: root hub lost power or was reset [163292.856801] usb usb5: root hub lost power or was reset [163292.856867] usb usb6: root hub lost power or was reset [163292.856936] usb usb7: root hub lost power or was reset [163292.858158] ath: phy0: ASPM enabled: 0x43 [163292.860122] sd 0:0:0:0: [sda] Starting disk [163292.959807] ACPI: EC: event unblocked [163293.100064] usb 2-4: reset high-speed USB device number 3 using ehci-pci [163293.180711] ata5: SATA link down (SStatus 0 SControl 300) [163293.180745] ata6: SATA link down (SStatus 0 SControl 300) [163293.193063] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [163293.335059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [163293.348156] ata2.00: configured for UDMA/100 [163294.056761] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [163296.116322] ata1.00: configured for UDMA/133 [163296.138390] OOM killer enabled. [163296.138391] Restarting tasks ... done. [163296.156670] video LNXVIDEO:01: Restoring backlight state [163296.159059] PM: suspend exit [163296.987901] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [163297.002060] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [163297.012843] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [163297.043261] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [163297.319448] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [163298.314163] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [163300.264642] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [163300.284109] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [163300.285811] wlp4s0: authenticated [163300.287241] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [163300.355126] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [163300.355282] wlp4s0: associated [163300.362208] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [167018.284134] PK-Backend[23521]: segfault at 7efbfbc17356 ip 00007efc2ea3e446 sp 00007efc1ce8e7f8 error 4 in libc.so.6[7efc2e9c2000+165000] Code: 0f 1f 40 00 66 0f ef c0 66 0f ef c9 66 0f ef d2 66 0f ef db 48 89 f8 48 89 f9 48 81 e1 ff 0f 00 00 48 81 f9 cf 0f 00 00 77 6a <f3> 0f 6f 20 66 0f 74 e0 66 0f d7 d4 85 d2 74 04 0f bc c2 c3 48 83 [169831.272474] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [169831.272602] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [169831.384164] pci_bus 0000:04: Allocating resources [169831.384192] pci_bus 0000:05: Allocating resources [169831.384213] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [169832.284340] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [169832.318967] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [169832.352864] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [169836.657722] PM: suspend entry (deep) [169836.657726] PM: Syncing filesystems ... done. [169837.882808] Freezing user space processes ... (elapsed 0.031 seconds) done. [169837.914733] OOM killer disabled. [169837.914734] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [169837.916155] Suspending console(s) (use no_console_suspend to debug) [169837.929148] sd 0:0:0:0: [sda] Synchronizing SCSI cache [169838.013302] sd 0:0:0:0: [sda] Stopping disk [169838.352478] ACPI: EC: interrupt blocked [169838.366247] ACPI: Preparing to enter system sleep state S3 [169838.366406] ACPI: EC: event blocked [169838.366407] ACPI: EC: EC stopped [169838.366408] PM: Saving platform NVS memory [169838.366732] Disabling non-boot CPUs ... [169838.373482] smpboot: CPU 1 is now offline [169838.373547] ACPI: Low-level resume complete [169838.373547] ACPI: EC: EC started [169838.373547] PM: Restoring platform NVS memory [169838.380283] Enabling non-boot CPUs ... [169838.380341] x86: Booting SMP configuration: [169838.380342] smpboot: Booting Node 0 Processor 1 APIC 0x1 [169839.410851] cache: parent cpu1 should not be sleeping [169839.938023] CPU1 is up [169839.941463] ACPI: Waking up from system sleep state S3 [169839.944418] ACPI: EC: interrupt unblocked [169839.958657] usb usb3: root hub lost power or was reset [169839.958750] usb usb4: root hub lost power or was reset [169839.958809] usb usb5: root hub lost power or was reset [169839.958814] usb usb6: root hub lost power or was reset [169839.958862] usb usb7: root hub lost power or was reset [169839.959959] ath: phy0: ASPM enabled: 0x43 [169839.961136] sd 0:0:0:0: [sda] Starting disk [169840.064675] ACPI: EC: event unblocked [169840.201034] usb 2-4: reset high-speed USB device number 3 using ehci-pci [169840.276455] ata6: SATA link down (SStatus 0 SControl 300) [169840.276489] ata5: SATA link down (SStatus 0 SControl 300) [169840.299075] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [169840.432058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [169840.436528] ata2.00: configured for UDMA/100 [169841.159526] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [169842.076477] ata1.00: configured for UDMA/133 [169842.097443] OOM killer enabled. [169842.097445] Restarting tasks ... done. [169842.116488] video LNXVIDEO:01: Restoring backlight state [169842.117451] PM: suspend exit [169842.163911] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [169842.176917] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [169842.181842] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [169842.250072] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [169842.341856] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [169843.364403] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [169844.424717] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [169844.455339] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [169844.461531] wlp4s0: authenticated [169844.468046] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [169844.533423] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [169844.533576] wlp4s0: associated [169844.542388] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [176456.879148] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [176456.879278] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [176456.983953] pci_bus 0000:04: Allocating resources [176456.983980] pci_bus 0000:05: Allocating resources [176456.983998] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [176458.321960] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [176458.351915] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [176458.405648] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [176462.174396] PM: suspend entry (deep) [176462.174399] PM: Syncing filesystems ... done. [176464.712692] Freezing user space processes ... (elapsed 0.039 seconds) done. [176464.752227] OOM killer disabled. [176464.752228] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [176464.753247] Suspending console(s) (use no_console_suspend to debug) [176464.767152] sd 0:0:0:0: [sda] Synchronizing SCSI cache [176464.901778] sd 0:0:0:0: [sda] Stopping disk [176465.223472] ACPI: EC: interrupt blocked [176465.236264] ACPI: Preparing to enter system sleep state S3 [176465.236421] ACPI: EC: event blocked [176465.236422] ACPI: EC: EC stopped [176465.236423] PM: Saving platform NVS memory [176465.236745] Disabling non-boot CPUs ... [176465.243473] smpboot: CPU 1 is now offline [176465.243641] ACPI: Low-level resume complete [176465.243641] ACPI: EC: EC started [176465.243641] PM: Restoring platform NVS memory [176465.250235] Enabling non-boot CPUs ... [176465.250293] x86: Booting SMP configuration: [176465.250294] smpboot: Booting Node 0 Processor 1 APIC 0x1 [176465.826107] cache: parent cpu1 should not be sleeping [176466.582112] CPU1 is up [176466.583831] ACPI: Waking up from system sleep state S3 [176466.586785] ACPI: EC: interrupt unblocked [176466.600729] usb usb3: root hub lost power or was reset [176466.600824] usb usb4: root hub lost power or was reset [176466.600878] usb usb5: root hub lost power or was reset [176466.600881] usb usb6: root hub lost power or was reset [176466.600933] usb usb7: root hub lost power or was reset [176466.602035] ath: phy0: ASPM enabled: 0x43 [176466.614129] sd 0:0:0:0: [sda] Starting disk [176466.703629] ACPI: EC: event unblocked [176466.841042] usb 2-4: reset high-speed USB device number 3 using ehci-pci [176466.924428] ata5: SATA link down (SStatus 0 SControl 300) [176466.924461] ata6: SATA link down (SStatus 0 SControl 300) [176466.938057] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [176467.079062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [176467.083592] ata2.00: configured for UDMA/100 [176467.801370] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [176468.982355] ata1.00: configured for UDMA/133 [176469.003416] OOM killer enabled. [176469.003418] Restarting tasks ... done. [176469.019140] video LNXVIDEO:01: Restoring backlight state [176469.020060] PM: suspend exit [176469.035933] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [176469.048799] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [176469.053627] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [176469.123356] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [176469.261666] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [176470.344665] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [176471.379464] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [176471.399437] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [176471.405199] wlp4s0: authenticated [176471.406112] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [176471.426949] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [176471.427146] wlp4s0: associated [176471.458117] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [184832.022396] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [184832.022534] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [184832.137028] pci_bus 0000:04: Allocating resources [184832.137058] pci_bus 0000:05: Allocating resources [184832.137079] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [184832.546433] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [184832.581422] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [184832.617002] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [184832.675839] PM: suspend entry (deep) [184832.675842] PM: Syncing filesystems ... done. [184833.512051] Freezing user space processes ... (elapsed 0.023 seconds) done. [184833.535237] OOM killer disabled. [184833.535238] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [184833.536241] Suspending console(s) (use no_console_suspend to debug) [184833.549169] sd 0:0:0:0: [sda] Synchronizing SCSI cache [184833.631484] sd 0:0:0:0: [sda] Stopping disk [184833.972477] ACPI: EC: interrupt blocked [184833.985257] ACPI: Preparing to enter system sleep state S3 [184833.985414] ACPI: EC: event blocked [184833.985415] ACPI: EC: EC stopped [184833.985415] PM: Saving platform NVS memory [184833.985738] Disabling non-boot CPUs ... [184833.992476] smpboot: CPU 1 is now offline [184833.992536] ACPI: Low-level resume complete [184833.992536] ACPI: EC: EC started [184833.992536] PM: Restoring platform NVS memory [184833.999241] Enabling non-boot CPUs ... [184833.999298] x86: Booting SMP configuration: [184833.999299] smpboot: Booting Node 0 Processor 1 APIC 0x1 [184834.461941] cache: parent cpu1 should not be sleeping [184834.565778] CPU1 is up [184834.569448] ACPI: Waking up from system sleep state S3 [184834.572720] ACPI: EC: interrupt unblocked [184834.586188] usb usb3: root hub lost power or was reset [184834.586487] usb usb4: root hub lost power or was reset [184834.586559] usb usb5: root hub lost power or was reset [184834.586614] usb usb6: root hub lost power or was reset [184834.586635] usb usb7: root hub lost power or was reset [184834.587743] ath: phy0: ASPM enabled: 0x43 [184834.592042] sd 0:0:0:0: [sda] Starting disk [184834.695652] ACPI: EC: event unblocked [184834.826038] usb 2-4: reset high-speed USB device number 3 using ehci-pci [184834.909514] ata5: SATA link down (SStatus 0 SControl 300) [184834.909623] ata6: SATA link down (SStatus 0 SControl 300) [184834.923077] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [184835.064066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [184835.081910] ata2.00: configured for UDMA/100 [184835.802402] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [184837.700081] ata1.00: configured for UDMA/133 [184837.721400] OOM killer enabled. [184837.721401] Restarting tasks ... done. [184837.736099] video LNXVIDEO:01: Restoring backlight state [184837.738049] PM: suspend exit [184837.891426] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [184837.904898] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [184837.907834] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [184837.945912] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [184838.026312] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [184839.030033] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [184840.128125] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [184840.142123] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [184840.144943] wlp4s0: authenticated [184840.146479] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [184840.211848] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=2) [184840.212000] wlp4s0: associated [184840.222728] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [190800.381205] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:06: Allocating resources [190800.381340] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci_bus 0000:02: Allocating resources [190800.496069] pci_bus 0000:04: Allocating resources [190800.496098] pci_bus 0000:05: Allocating resources [190800.496123] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1e.0: bridge window [mem 0x96800000-0x969fffff] pci 0000:00:1e.0: bridge window [mem 0x96a00000-0x96bfffff 64bit pref] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [190801.955313] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [190802.000479] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [190802.075097] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [190804.307205] PM: suspend entry (deep) [190804.307208] PM: Syncing filesystems ... done. [190805.369417] Freezing user space processes ... (elapsed 0.031 seconds) done. [190805.401216] OOM killer disabled. [190805.401217] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [190805.402250] Suspending console(s) (use no_console_suspend to debug) [190805.416206] sd 0:0:0:0: [sda] Synchronizing SCSI cache [190805.525124] sd 0:0:0:0: [sda] Stopping disk [190805.848469] ACPI: EC: interrupt blocked [190805.861225] ACPI: Preparing to enter system sleep state S3 [190805.861362] ACPI: EC: event blocked [190805.861363] ACPI: EC: EC stopped [190805.861364] PM: Saving platform NVS memory [190805.861655] Disabling non-boot CPUs ... [190805.868473] smpboot: CPU 1 is now offline [190805.868643] ACPI: Low-level resume complete [190805.868643] ACPI: EC: EC started [190805.868643] PM: Restoring platform NVS memory [190805.875233] Enabling non-boot CPUs ... [190805.875290] x86: Booting SMP configuration: [190805.875292] smpboot: Booting Node 0 Processor 1 APIC 0x1 [190806.225169] cache: parent cpu1 should not be sleeping [190806.319042] CPU1 is up [190806.321064] ACPI: Waking up from system sleep state S3 [190806.323925] ACPI: EC: interrupt unblocked [190806.337587] usb usb3: root hub lost power or was reset [190806.337830] usb usb5: root hub lost power or was reset [190806.337904] usb usb6: root hub lost power or was reset [190806.337971] usb usb7: root hub lost power or was reset [190806.338154] usb usb4: root hub lost power or was reset [190806.339184] ath: phy0: ASPM enabled: 0x43 [190806.339254] sd 0:0:0:0: [sda] Starting disk [190806.439832] ACPI: EC: event unblocked [190806.580059] usb 2-4: reset high-speed USB device number 3 using ehci-pci [190806.660721] ata5: SATA link down (SStatus 0 SControl 300) [190806.660772] ata6: SATA link down (SStatus 0 SControl 300) [190806.674073] usb 4-1: reset full-speed USB device number 2 using uhci_hcd [190806.816072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [190806.823686] ata2.00: configured for UDMA/100 [190807.530354] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [190809.655953] ata1.00: configured for UDMA/133 [190809.677458] OOM killer enabled. [190809.677460] Restarting tasks ... done. [190809.684259] video LNXVIDEO:01: Restoring backlight state [190809.685249] PM: suspend exit [190809.723440] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [190809.735757] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready [190809.740359] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [190809.819153] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [190809.962112] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [190810.992601] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [190812.104524] wlp4s0: authenticate with XX:XX:XX:XX:XX:XX [190812.123563] wlp4s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [190812.125515] wlp4s0: authenticated [190812.131052] wlp4s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [190812.198591] wlp4s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x411 status=0 aid=3) [190812.198743] wlp4s0: associated [190812.206071] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [214107.430283] wlp4s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [214130.745867] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [214130.774618] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [214137.182912] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready