[ 0.927234] SCSI subsystem initialized [ 0.934218] device-mapper: uevent: version 1.0.3 [ 0.934276] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 1.477272] xor: automatically using best checksumming function avx [ 1.515020] raid6: avx2x4 gen() 9629 MB/s [ 1.544020] raid6: avx2x2 gen() 10977 MB/s [ 1.554031] tsc: Refined TSC clocksource calibration: 2592.000 MHz [ 1.554041] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns [ 1.561046] clocksource: Switched to clocksource tsc [ 1.569042] raid6: avx2x1 gen() 11534 MB/s [ 1.569045] raid6: using algorithm avx2x1 gen() 11534 MB/s [ 1.595042] raid6: .... xor() 6067 MB/s, rmw enabled [ 1.595045] raid6: using avx2x2 recovery algorithm [ 1.701549] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 1.740691] ACPI: bus type USB registered [ 1.740729] usbcore: registered new interface driver usbfs [ 1.740742] usbcore: registered new interface driver hub [ 1.740755] usbcore: registered new device driver usb [ 2.363108] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:49/PNP0C09:00/PNP0C0D:00/input/input2 [ 2.374054] ACPI: button: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 2.374233] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 2.374370] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 2.374500] ACPI: button: Power Button [PWRF] hid: raw HID events driver (C) Jiri Kosina [ 2.483524] cryptd: max_cpu_qlen set to 1000 [ 2.538184] ACPI: battery: Slot [BAT1] (battery present) [ 2.549443] Linux agpgart interface v0.103 [ 2.560517] AVX2 version of gcm_enc/dec engaged. [ 2.560557] AES CTR mode by8 optimization enabled [ 2.589366] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.589377] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.590504] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 2.591996] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.592003] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.592009] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.592459] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 2.592465] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.592469] usb usb1: Product: xHCI Host Controller [ 2.592471] usb usb1: Manufacturer: Linux 6.2.2-desktop-1omv2390 xhci-hcd [ 2.592474] usb usb1: SerialNumber: ... [ 2.592696] hub 1-0:1.0: USB hub found [ 2.592719] hub 1-0:1.0: 12 ports detected [ 2.595400] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 2.595406] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.595409] usb usb2: Product: xHCI Host Controller [ 2.595412] usb usb2: Manufacturer: Linux 6.2.2-desktop-1omv2390 xhci-hcd [ 2.595414] usb usb2: SerialNumber: ... [ 2.595570] hub 2-0:1.0: USB hub found [ 2.597426] hub 2-0:1.0: 6 ports detected [ 2.598160] usb: port power management may be unreliable [ 2.669859] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 2.669964] nvme nvme0: pci function 0000:01:00.0 [ 2.678852] nvme nvme0: allocated 32 MiB host memory buffer. [ 2.679571] nvme nvme0: 4/0/0 default/read/poll queues [ 2.683217] nvme0n1: p1 p2 p3 p4 p5 [ 2.691652] ACPI: bus type drm_connector registered [ 2.836050] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 2.846536] EXT4-fs (nvme0n1p4): orphan cleanup on readonly fs [ 2.847695] EXT4-fs (nvme0n1p4): mounted filesystem HASH_8C6-DA3E-8D0D-4D52-01496CECF2CF with ordered data mode. Quota mode: none. [ 2.964213] usb 1-1: New USB device found, idVendor=2717, idProduct=5013, bcdDevice= 1.00 [ 2.964222] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.964225] usb 1-1: Product: Mi Wireless Mouse [ 2.964228] usb 1-1: Manufacturer: XiaoMi [ 3.004977] usbcore: registered new interface driver usbhid [ 3.004981] usbhid: USB HID core driver [ 3.076083] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 3.089092] usb 2-1: New USB device found, idVendor=0951, idProduct=16a2, bcdDevice= 1.00 [ 3.089102] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.089105] usb 2-1: Product: DTR30G2 [ 3.089107] usb 2-1: Manufacturer: Kingston [ 3.089110] usb 2-1: SerialNumber: ... [ 3.202051] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 3.218456] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.228089] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.233928] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 3.270485] i915 0000:00:02.0: [drm] Panel is missing HDR static metadata. Possible support for Intel HDR backlight interface is not used. If your backlight controls don't work try booting with i915.enable_dpcd_backlight=3. needs this, please file a _new_ bug report on drm/i915, see https://gitlab.freedesktop.org/drm/intel/-/wikis/How-to-file-i915-bugs for details. [ 3.278829] i915 0000:00:02.0: [drm] Skipping intel_backlight registration [ 3.278955] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 3.281672] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.281957] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.296332] fbcon: i915drmfb (fb0) is primary device [ 3.311253] Console: switching to colour frame buffer device 240x67 [ 3.331453] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.331539] usb 1-5: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 3.331544] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.331548] usb 1-5: Product: USB2.0-CRW [ 3.331551] usb 1-5: Manufacturer: Generic [ 3.331553] usb 1-5: SerialNumber: ... [ 3.833117] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02 [ 3.833125] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.868998] zram0: detected capacity change from 0 to 16777216 [ 3.941889] soc_button_array ACPI0011:00: Unknown button index 0 upage 01 usage c6, ignoring [ 3.968976] Consider using thermal netlink events interface [ 3.988573] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS [ 4.068865] Adding 40959996k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:40959996k SSDscFS [ 4.146857] FAT-fs (nvme0n1p2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 4.147191] EXT4-fs (nvme0n1p5): mounted filesystem HASH_E59-7E55-D198-08BA-FB851FDD13C6 with ordered data mode. Quota mode: none. [ 4.170429] ACPI: AC: AC Adapter [ADP1] (on-line) [ 4.178559] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002) [ 4.181247] thermal LNXTHERM:00: registered as thermal_zone2 [ 4.181250] ACPI: thermal: Thermal Zone [THRM] (51 C) [ 4.183942] Bluetooth: Core ver 2.22 [ 4.183953] NET: Registered PF_BLUETOOTH protocol family [ 4.183954] Bluetooth: HCI device and connection manager initialized [ 4.183957] Bluetooth: HCI socket layer initialized [ 4.183959] Bluetooth: L2CAP socket layer initialized [ 4.183960] Bluetooth: SCO socket layer initialized [ 4.209731] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 4.227442] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.232059] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006) [ 4.232230] intel-lpss 0000:00:15.0: Failed to create debugfs entries [ 4.232323] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 4.232758] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.233308] usbcore: registered new interface driver btusb [ 4.238294] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 4.238378] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 4.239283] i2c i2c-5: 1/1 memory slots populated (from DMI) [ 4.239777] i2c i2c-5: Successfully instantiated SPD at 0x50 [ 4.251864] input: MSI WMI hotkeys as /devices/virtual/input/input8 [ 4.252295] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 4.260519] Intel(R) Wireless WiFi driver for Linux [ 4.260618] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 4.277320] intel_rapl_common: Found RAPL domain package [ 4.277324] intel_rapl_common: Found RAPL domain dram [ 4.282971] input: gpio-keys as /devices/platform/ACPI0011:00/gpio-keys.1.auto/input/input9 [ 4.292765] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-1.sfi [ 4.292922] Bluetooth: hci0: Boot Address: 0x24800 [ 4.292925] Bluetooth: hci0: Firmware Version: 15-45.22 [ 4.292927] Bluetooth: hci0: Firmware already loaded [ 4.327246] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 4.327425] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.342453] input: XiaoMi Mi Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:2717:5013.0001/input/input10 [ 4.342527] input: XiaoMi Mi Wireless Mouse Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:2717:5013.0001/input/input11 [ 4.354461] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver [ 4.354477] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 4.354969] iwlwifi 0000:00:14.3: loaded firmware version 72.daa05125.0 QuZ-a0-jf-b0-72.ucode op_mode iwlmvm [ 4.363071] mc: Linux media interface: v0.10 [ 4.367197] usb-storage 2-1:1.0: USB Mass Storage device detected [ 4.370575] scsi host0: usb-storage 2-1:1.0 [ 4.373561] usbcore: registered new interface driver usb-storage [ 4.385641] usbcore: registered new interface driver rtsx_usb [ 4.395701] input: XiaoMi Mi Wireless Mouse System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:2717:5013.0001/input/input12 [ 4.397653] videodev: Linux video capture interface: v2.00 [ 4.400970] hid-generic 0003:2717:5013.0001: input,hidraw0: USB HID v1.11 Mouse [XiaoMi Mi Wireless Mouse] on usb-0000:00:14.0-1/input0 [ 4.403741] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 4.403747] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.403749] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.403752] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.403753] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.403755] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 4.403756] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 4.405094] usbcore: registered new interface driver uas [ 4.405390] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 4.405393] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.405394] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.405394] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.405395] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.405396] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.451242] iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9560 160MHz, REV=0x351 [ 4.451299] thermal thermal_zone4: failed to read out thermal zone (-61) [ 4.469243] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 4.469288] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 4.469326] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 4.469362] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 4.469397] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 4.489296] usb 1-6: Found UVC 1.00 device HD Webcam (5986:211c) [ 4.531500] input: HD Webcam: HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input18 [ 4.532290] usbcore: registered new interface driver uvcvideo [ 4.563854] iwlwifi 0000:00:14.3: Detected RF JF, rfid=0x105110 [ 4.621100] iwlwifi 0000:00:14.3: base HW address: 6418D5CDF044360A3A84D3D46A521321 [ 4.680122] intel_rapl_common: Found RAPL domain package [ 4.680126] intel_rapl_common: Found RAPL domain core [ 4.680127] intel_rapl_common: Found RAPL domain uncore [ 4.680128] intel_rapl_common: Found RAPL domain dram [ 4.680129] intel_rapl_common: Found RAPL domain psys [ 4.692974] spi-nor spi0.0: gd25q128 (16384 Kbytes) [ 4.752669] ee1004 5-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 4.764949] Creating 1 MTD partitions on "0000:00:1f.5": [ 4.764953] 0x000000000000-0x000001000000 : "BIOS" [ 4.778832] iTCO_vendor_support: vendor-support=0 [ 4.779580] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4d5f01) [ 4.788722] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 4.791358] psmouse serio1: elantech: Synaptics capabilities query result 0x11, 0x15, 0x0d. [ 4.802459] psmouse serio1: elantech: Elan sample query result 03, c0, 76 [ 4.812594] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.858768] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7 [ 4.872515] input: CUST0001:00 04F3:30AA Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-CUST0001:00/0018:04F3:30AA.0002/input/input19 [ 4.872624] input: CUST0001:00 04F3:30AA Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-CUST0001:00/0018:04F3:30AA.0002/input/input21 [ 4.872664] hid-generic 0018:04F3:30AA.0002: input,hidraw1: I2C HID v1.00 Mouse [CUST0001:00 04F3:30AA] on i2c-CUST0001:00 [ 4.879990] intel_tcc_cooling: Programmable TCC Offset detected [ 4.922766] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 4.989496] input: CUST0001:00 04F3:30AA Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-CUST0001:00/0018:04F3:30AA.0002/input/input22 [ 4.989640] input: CUST0001:00 04F3:30AA Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-CUST0001:00/0018:04F3:30AA.0002/input/input24 [ 4.989775] hid-multitouch 0018:04F3:30AA.0002: input,hidraw1: I2C HID v1.00 Mouse [CUST0001:00 04F3:30AA] on i2c-CUST0001:00 [ 5.394720] scsi 0:0:0:0: Direct-Access Kingston DTR30G2 PMAP PQ: 0 ANSI: 6 [ 5.403333] sd 0:0:0:0: [sda] 122945536 512-byte logical blocks: (62.9 GB/58.6 GiB) [ 5.404263] sd 0:0:0:0: [sda] Write Protect is off [ 5.404266] sd 0:0:0:0: [sda] Mode Sense: 2b 00 00 08 [ 5.405025] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.410746] sda: sda1 sda2 [ 5.410929] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.678158] NET: Registered PF_PACKET protocol family [ 8.342139] ACPI BIOS Error (bug): Could not resolve symbol [^^^RP05.PEGP], AE_NOT_FOUND (20221020/psargs-330) [ 8.342161] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._QD1 due to previous error (AE_NOT_FOUND) (20221020/psparse-531) [ 9.446243] wlo1: authenticate with 2E2CB1E8975B63E1F73D2713FBD098B5 [ 9.455198] wlo1: send auth to 2E2CB1E8975B63E1F73D2713FBD098B5 (try 1/3) [ 9.481090] wlo1: authenticated [ 9.481286] wlo1: VHT capa missing/short, disabling VHT/HE/EHT [ 9.482078] wlo1: associate with 2E2CB1E8975B63E1F73D2713FBD098B5 (try 1/3) [ 9.482929] wlo1: RX AssocResp from 2E2CB1E8975B63E1F73D2713FBD098B5 (capab=0x831 status=0 aid=2) [ 9.488904] wlo1: associated [ 9.541297] ACPI BIOS Error (bug): Could not resolve symbol [^^^RP05.PEGP], AE_NOT_FOUND (20221020/psargs-330) [ 9.541324] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._QD1 due to previous error (AE_NOT_FOUND) (20221020/psparse-531) [ 9.737676] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 10.747184] ACPI BIOS Error (bug): Could not resolve symbol [^^^RP05.PEGP], AE_NOT_FOUND (20221020/psargs-330) [ 10.747206] ACPI Error: Aborting method \_SB.PCI0.LPCB.EC._QD1 due to previous error (AE_NOT_FOUND) (20221020/psparse-531) [ 442.054481] Non-volatile memory driver v1.3 [ 442.148900] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 442.168943] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 953.237914] usb 2-1: USB disconnect, device number 2 [ 1208.965049] wlo1: deauthenticating from 2E2CB1E8975B63E1F73D2713FBD098B5 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1209.144714] EXT4-fs (nvme0n1p5): unmounting filesystem HASH_E59-7E55-D198-08BA-FB851FDD13C6. [ 1209.188208] zram0: detected capacity change from 16777216 to 0 [ 1209.225037] watchdog: watchdog0: watchdog did not stop!